Oferta Bgs 2015

8/9/2019 Oferta Bgs 2015

1/28

www.bgstechnic.com

Workshop Promo

1/2015

valid until 30.07.2015

8/9/2019 Oferta Bgs 2015

2/28

DEEP OFFSET DOUBLE ENDED

RING SPANNER SET,

6X7-30X32 MM

Item 1214

12x

DIN 838

CV

2

RATCHET WRENCH SET,

8-19 MM

Item 30902

-reversible

12x CV

COMBINATION SPANNER SET

6-32 MM

Item 1196

25x CV

DIN 3113A

PIPE WRENCH SET, OPEN TYPE,14-17-19 MM

Item 8450

3x

CV

SOCKET SET

Item 1206

- forged

- 10 hexagon sockets

22-24-27-30-32-36-38-41-46-50 mm

- 1 reversible ratchet 500 mm

- 1 sliding T-bar 450 mm

- 2 extension bars 100 - 200 mm

- chrome plated

14x CV

SOCKETS FOR BOSCHINJECTION PUMPS

Item 8827

3x

COMBINATION SPANNER SET

6-22 MM

Item 1197

12x CV

DIN 3113A

18.80€99.99€

28.25€

7.90€

25.95€ 14.95€

99€

8/9/2019 Oferta Bgs 2015

3/283

„WOBBLE“ EXTENSION

BAR SET

Item 2253

9x CV

each

1 x

50 mm

100 mm

250 mm

each

1 x

75 mm

150 mm

250 mm

each

1 x

50 mm

125 mm

250 mm

GEAR LOCK SET

- the special “gear-lock-profile“ can be used for hex., double hex., T-Star, metric and inch size screws

- fits T-Star sockets (E10, E12, E14, E16, E18, E20, E22, E24),

SAE sizes (5/16“, 11/32“, 3/8“, 7/16“, 15/32“, 1/2“, 9/16“, 19/32“; 5/8“,

3/4“, 25/32“, 13/16“, 7/8“, 15/16“, 1-1/16“, 1-3/16“, 1-1/4“)

Item 2152

19x

8 - 9 - 10 - 11 - 12 - 1314 - 15 - 16 - 17 - 18 - 19

20 - 21 - 22 - 24

27 - 30 - 32 mm

SOCKET SET

Item 2226

- chrome plated

- 12-pt

16x CV

8 - 9 - 10 - 11 - 12 - 1314 - 15 - 16 - 17 - 18 - 19

20 - 21 - 22 - 24 mm

19.90€

24.50€

15.60€

8/9/2019 Oferta Bgs 2015

4/284

3 Slot-bits 8-10-12 mm

4 Cross Slot bits PH3-PH4-PZ3-PZ4

5 int. hex. bits 7-8-10-12-14

6 T-Star bits T40-T45-T50-T55-T60-T70

6 T-Star bits, tamperproof T40-T45-T50-T55-T60-T70

10 T-Star bits T5-T6-T7-T10-T15-T20-T25-T27-T30-T40

8 T-Star bits, tamperproof T7-T10-T15-T20-T25-T27-T30-T405 Ribe bits M5-M6-M7-M8-M9

3 Spline bits M5-M6-M8

8 T-Star bits TS10-TS15-TS20-TS25-TS27-TS30-TS40-TS45


2 int. hex. bits H2-H2.5

1 Reversible ratchet

1 sliding bar

1 Extension bar 50 mm


1 Universal joint

1 handle 150 mm

13sockets

4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm

7deep sockets 4-5-6-7-8-9-10 mm

5 E-Star sockets E 4-5-6-7-8

1 1/4” bit adapter

30 bit sockets



1 Universal joint

1 spark plug socket 18 mm

10Sockets

10-11-12-13-14-15-16-17-18-19 mm

6 Deep Sockets 10-11-12-13-14-15 mm

6 E-Star Sockets E10-11-12-14-16-18

1 5/16” bit-adapter




1 sliding adapter for 1/2” extension bar

1 5/16” bit adapter

1 Universal joint

2 Spark plug sockets 16 mm and 21 mm

17Sockets

10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32 mm

5 Deep sockets 16-17-18-19-22 mm

2 E-Star sockets E20-24

7 internal hex. wrenches 1.27-1.5-2-2.5-3-4-5 mm

8

5

1 6

ALSO AVAILABLE WITH

PRO TORQUE 6-PT-TYPE SOCKETS

92€

92€

10€ 11.35€ 15.65€

8/9/2019 Oferta Bgs 2015

5/285

SOCKET SET

Item 2146

46x

1 adapter 1/4” ext. hex. x 1/4” ext. square head

1 spinner handle



1 Universal joint

1 sliding t-bar

1 flex. extension bar

1 Reversible ratchet with quick-release button

4 L-type wrenches int. hexagon: 1-1,5 - 2 - 3 mm

6 T-Star bit sockets, tamperproofT10-T15-T20-T25-T30-T40

11 bit-sockets Slot, plain + cross slot, PZ, int. hex.

13“super lock” sockets 6,3 (1/4) drive:

4-4,5-4,5,5-6-7-8-9-10-11-12-13-14 mm

BIT SOCKET ASSORTMENT

Item 5188

10T-Star bit sockets, 55 mm long:

T20-T25-T27-T30-T40-T45-T50-T55-T60-T70

6T-Star bit sockets, 100 mm long:

T25 - T30 - T40 - T45 - T50 - T60

9Internal Hexagon bit sockets, 55 mm long:

5-6-7-8-10-12-14-17-19 mm

5Internal Hexagon bit sockets, 100 mm long:

6-7-8-10-12 mm

4Spline bit sockets, 55 mm long:

M5-M6-M8-M10

5Spline bit sockets, 100 mm long:

M6-M8-M10-M12-M14

9T-Star-bits, tamperproof, 30 mm long:

T20-T25-T27-T30-T40-T45-T50-T55-T60

1 1/2” bit adaptor

49x CV

62.85€

28.25€

8/9/2019 Oferta Bgs 2015

6/286

SOCKET SET

Item 2259

213x

CV

3 Spline bits M5-M6-M8

3 T-Star bits T5-T6-T7

1 T-Star bits tamperproof T7

9 T-Star bits tamperproof

TS10-TS15-TS20-TS25-TS27-TS30-TS40-TS45-TS50

5 Ribe bits M5-M6-M7-M8-M9

3 Slot bits 8-10-12 mm


3 T-Star bits T40-T45-T50

3 T-Star bits tamperproof T40-T45-T50

2 internal hex bits 7-8 mm

2 T-Star bits T55-T60

2 T-Star bits tamperproof T55-T60

2 internal hex bits 10-12 mm

2 T-Star bits T70 x 30 mm - T70 x 115 mm

1 T-Star bits tamperproof T70 x 30 mm

2 internal hex bits 14 mm x 30 mm -13 mm x 115 mm

2 Spline bits M14 x 40 mm - M14 x 115 mm

1 reversible ratchet

13 Sockets

4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm

7 Deep Sockets 4-5-6-7-8-9-10 mm

5 E-Star Sockets E4-E5-E6-E7-E8



1 Universal joint

1 bit holder for 1/4" 6,3 mm bits

1 Spinner handle 150 mm

1 sliding bar

30 bit-Sockets


10 Sockets 10-11-12-13-14-15-16-17-18-19 mm

6 Deep Sockets 10-11-12-13-14-15 mm

6 E-Star Sockets E10-E11-E12-E14-E16-E18 mm


1 Spark plug sockets 18 mm

1 Universal joint

1 bit holder for 8 & 10 mm bits


17Sockets 10-11-12-13-14-15-16-17-18-19-20-21-22-

24-27-30-32 mm

5 Deep Sockets 16-17-18-19-22 mm

2 E-Star Sockets E20-E24

1 Extension bar 250 mm inkl. sl iding bar


2 Spark plug sockets 16-21 mm

1 bit holder for 10 mm bits


1 Universal joint

28 bit sockets

7 Hex key set

1,27-1,5-2-2,5-3-4-5 mm

8 combination spanner 8-9-10-12-13-14-17-19 mm

8

5

1 6

210.99€

8/9/2019 Oferta Bgs 2015

7/28

SOCKET SET

Item 8820

176x

CV

6 T-Star-bits T40-T45-T50-T55-T60-T70

6 T-Star bits tamperproof TH40-TH45-TH50-TH55-TH60-TH70


3 Slot bits 8-10-12 mm

5 internal hex. 7-8-10-12-14 mm


13Sockets

4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm

7 Deep Sockets 4-5-6-7-8-9-10 mm

5 E-Star Sockets E4-E5-E6-E7-E8



1 Universal joint

1 Spinner handle 150 mm

1 sliding bar

33 bit sockets


10 Sockets 10-11-12-13-14-15-16-17-18-19 mm

6 Deep Sockets 10-11-12-13-14-15 mm

6 E-Star Sockets E10-E11-E12-E14-E16-E18 mm


1 Spark plug sockets 18 mm

1 Universal joint1 bit holder for 8 mm bits


17Sockets

10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32 mm

2 Deep Sockets 16-18 mm

2 E-Star Sockets E20-E24

1 Extension bar 250 mm incl. sliding bar


2 Spark plug sockets 16-21 mm


1 Universal joint

3 wheel nut sockets with protective cover 17-19-21 mm

9T-Star key set with tamperproof

T10-T15-T20-T25-T27-T30-T40-T45-T50

9 internal hex key set 1,5-2-2,5-3-4-5-6-8-10 mm

12ratchet combination spanner

8-9-10-11-12-13-14-15-16-17-18-19 mm 8

5

1 6

7

SALES DISPLAY, FULLY EQUIPPED

WITH SOCKETS / BIT SOCKETS

Item 4095

- with EPE for top tray

- dimensions of the display:

(depth x width x height) 335 x 410 x 270 mm

each7 Internal hex. sockets, 100 mm H7 - H8 - H10 - H12

each7

Spline sockets, 100 mm M8 - M10 - M12 - M14

each7 T-Star sockets, 100 mm T25 - T30 - T40 - T45 - T50

each15 6-pt. Sockets 21 und 22 mm

each10

6-pt. Sockets

8-9-11-12-14-15-16-24-32 mmeach

8 6-pt. Sockets 27 und 30 mm

each20

6-pt. Sockets 10-13-17-19 mm

8 6-pt. Sockets 18mm

315x

205€

8/9/2019 Oferta Bgs 2015

8/28

T-STAR TOOL SET

Item 7849

84x

7 E-Star Sockets: E12-E14-E16-E18-E20-E22-E24

1 bit adaptor for 10 mm bits

1 bit adaptor for 14 mm bits

7 E-Star Sockets: E4-E5-E6-E7-E8-E10-E11

6 bit sockets length 37 mm: T10-15-20-25-27-30

3 bits length 25 mm: T7-T8-T9

8TS-bits (5-sided), length 25mm, tamperproof,

TS10-15-20-25-27-30-40-45

7T-Star bits, tamperproof

T10-15-20-25-27-30-40

1 bit adaptor for 6,3 (1/4) bits

610 mm hex shankbits, length 30 mm, tamperproof

T40-45-50-55-60-70

7 10 mm hex shankbits, length 75 mm T15-20-25-30-40-45-502 14 mm hex shankbits, length 75 mm T55-T60

314 mm hex shankbits T-Star bits, 40 mm length, tamperproof

T80-90-100

12 T-Star L-type wrenches T8-10-15-20-25-27-30-40-45-50-55-60

8T-Star-screwdrivers, tamperproof

T8-10-15-20-25-27-30-40

4 E-Star wrenches E6xE8-E10xE12-E14xE18-E20xE24

1 magnetic pickup tool

8

- End-to-end blades with hexagon on the handle

- ergonomically shaped “soft grip“ handles

SCREWDRIVER SET

Item 7895

3.2x72 mm, 5.0x75 mm, 6.0x100 mm,

6.0x38 mm, 8.0x150 mm, 9.5x200 mm

#0x75 mm, #1x75 mm, #2x100 mm,

#2x38 mm, #3x150 mm, #4x 200 mm

- sizes: (length without handle and hex)

12x

20.50€

74.75€

8/9/2019 Oferta Bgs 2015

9/28

STEPPED HOLE CUTTER SET,

TITANIUM COATED

Item 1624

- HSS-steel

- little abrasion - longer life

- 2 mm ascending steps

4-20 mm 4-30 mm

4-12 mm

3x

9

HSS SCREW EXTRACTOR SET

Item 8462

- includes:

- 5 HSS drills: 3.2 - 4.8 - 6.4 - 8.0 - 8.7 mm

- 10 guide bushings for drills

- 5 extractor pins

- 5 extractor adapters

25x

PIN PUNCH SET

Item 1695

- includes:

- 8x pin punches, 200 mm length,



- 1x automatic centre punch, 125 mm length

18x

MINI LOCKING PLIERS SET

Item 4499

3x

HOSE CLAMP PLIERS

Item 8412

0-38 mm

application video

- Crimping tool set with ratcheting function and adjustable

jaws

- includes 5 exchangeable crimping jaws for:

- closed non-insulated terminal ends

- insulated terminal ends

- open, non-insulated terminal ends- small, insulated terminal ends

- big, insulated terminal ends

CRIMPING TOOL SET

WITH 5 PAIRS OF JAWS

Item 1410

6x

FLEXIBLE HOSE CLAMPPLIERS SET

Item 1815

3x 155-185-255 mm

- for cooling liquid,

brake fluid hoses

42.40€ 21.95€

7.80€

20.40€

17.25€

10.25€

62.85€

8/9/2019 Oferta Bgs 2015

10/28

Item 8412 Item 471 Item 473

Item 8804

Item 161 Item 8600 Item 470

HOSE CLAMP PLIERS SET IN TOOL TRAY

FOR BGS 2001/4100 TOOL CHESTS

Item 504

- dimensions: (W x D x H) 567 x 408 x 32 mm

- includes the following tools:

- BGS 8412 Hose Clamp Pliers 0 - 38 mm

- opening up to 38 mm

- ratchet locking function

- opens by spring mechanism

- BGS 471 Bent Hose Clip Pliers for CLIC / -R

- 190 mm long - swivel jaws

- BGS 473 Ratcheting Hose Clip Pliers

- for spring band clips

- interchangeable jaws (2 pairs)

- length: 200 mm

- BGS 161 CV-Joint Boot Pliers

- universal use, works on steering gear gaiters,

fuel hoses

- for working on Oetiker System hose clamps

- length 235 mm

- BGS 8600 Hose Clamp Pliers

- specifically made for space-saving hose clips

- ratchet mechanism for holding hose clips open

- suitable for most vehicles

- especially suitable for new type hose clips

on VAG fuel lines

- BGS 470 Hose Clip Pliers with Bowden Cable

- universal tool for installation and removal of 18 - 54mm long elastic collars, even in narrow

spaces (due to the bowden cable)

- length 630 mm

- Hose Clamp Tension Tool

- suitable for spring steel band clamps

- by turning the knurled nut, the tool

opens the hose clamp and it can

remain in this position until the

disassembly / assembly is complete

- max. Opening: 62 mm

0

BRAKE BLEEDER

WRENCH SET

Item 66512

- for bleeding brake systems without

removing the wheels

BRAKE DISC CALIPER

Item 8689

max.

60 mm

Alu 8x

9-10-11 mm

135.20€

51.85€

10.95€

8/9/2019 Oferta Bgs 2015

11/2811

IMPACT WRENCH

Item 3245

- working torque: 515 Nm

- max. torque: 678 Nm

- free speed: 11,000 RPM

- working pressure: 90 psi

- impact mechanism: twin hammer

- air consumption Ø: 5.8 CFM

- air inlet: 1/4“- recommended hose size: 3/8“

- weight: 1.6 kg

- short, lightweight design

adaptor /air adaptor

12.5 1 2

AIR BLOW GUN

WITH FLOW REGULATOR

Item 8706

- includes 1/4“ air connector

- max. pressure 10 bar, operating pressure 6.3 bar

- noise level: 86 dB

- air consumption:

up to 320 l/min

max.

10 Bar


AIR SPIRAL HOSE

Item 66540

- spiral diameter: approx. 60 mm

- hose inside diameter: 5 mm

- hose outside diameter: 8 mm

max.

10 Bar

0,9-6

Meter


- for quick and easy brake bleeding

- can be used by one person only

- large 1.5 l canister with aluminium nozzle and clamp for compressed air

(lets you keep both hands free)

- protects the main brake cylinder as no pumping required

- can also be used for hydraulic clutches

- 1000mm silicone hose guarantees a long product life time

- accurately fitting rubber adaptor for the bleeding nipple

- 1 l canister with shut-off valve and universal clamp

for refilling the brake system

PROFESSIONAL BRAKE BLEEDER TOOL SET

Item 8080

2x 1,5 Liter1,0 Liter

- suitable for mounting on wall, floor and ceiling

- with hose stop, auto retracting

- hose diameter: inside 9.5 mm, outside 17 mm

- maximum air flow: 25 CFM

- made of steel sheet

RETRACTABLE AIR HOSE REEL

Item 8584

15 Meters

max.

20 Bar


- for air pressure assisted resetting of brake pistons

- hand lever for rotary function, suitable for left and right turn operation

- also suitable for brake calipers with hand brake function

- fits for the following vehicles:

- Alfa Romeo, Audi, Citroen, Fiat, Ford, GM

Honda, Jaguar, Lancia, Land Rover, Mazda

Nissan, Peugeot, Renault, Rover, Saab, Seat

Subaru, Toyota, Volvo, VW

- includes 21 resetting adapters, also 3- and 4-pin adapter for newer vehicles

PNEUMATIC BRAKE PISTON RESETTING TOOL SET

Item 1114

22x 5-8 Bar

110€

99€

15.90€

92€

12.50€ 98.25€

8/9/2019 Oferta Bgs 2015

12/28

- durable industrial seal gun for silicone, acrylic, grease, assembly adhesives, etc.

- with 10.8 V LI-Ion battery

- gun filling with 310-/ 400 ml cartridges or loose material via dispenser

- allows quick and clean application

- automatic reverse function avoids pressure in the system and prevents the leakage of liquids

- adjustable feed speed from 1 - 5.0 mm/s

- gear rack pushing bar

- one battery charge allows processing of multiple silicone cartridges

- thrust power: 450 kg

- weight: 2.2 kg- contents: dispensing gun, battery, charger

- additional batteries available under BGS 9916

PROFESSIONAL CORDLESS CAULKING GUNLI-ION, 10.8 V

Item 8496

2

- allows loosening of stuck glow plugs

- can also be used on screws where a low torque

is required

- 4-stage torque adjustable to approx. 20-30-40-50 NM

to minimize the risk of tear-off of the glow plugs

- torque setting is possible in forward and reverse rotation

- incl. 5 deep sockets in 8, 9, 10, 11 and 12

mm, 1 extension bar and 1 universal joint

- 1/4“ drive

- working pressure: 6.2 bar

AIR IMPACT WRENCH SET

FOR GLOW PLUGS

Item 3320


105.80€

285€

8/9/2019 Oferta Bgs 2015

13/28

- Principle of operation:

There is an alternating magnetic field.

The metallic obeachct (e.g. nut), in the induction coil,

acts on the induced eddy currents

as an electrical resistance and thus heats up.

- allows heating of screws / nuts without

severely heating surrounding components or

even destroying them, as it is often the case

when heated with a torch

- within the shortest possible time, e.g. rusty nuts

are heated and can be loosened

- using for e.g. ball joint pinch bolts

and other items on axle and engine

- also for heating components such as bearings

- includes the following induction coils

inductive coil 19 mm, 220 mm long (for Ø 10-16 mm)

inductive coil 27 mm, 220 mm long (for Ø 17-24 mm)

induction coil 50 mm, 235 mm length (for heating small sufaces)

formless coil, 780 mm, for heating of components (bearings, etc.)

- power supply: ~230V (50-60Hz)- current: 7.5 Amps

- max. power: 1.5 kw

- dimensions: 200 x 140 x 75 mm

INDUCTION HEATER

Item 2169

application video

13

625€

8/9/2019 Oferta Bgs 2015

14/284

- 5x reamer for reaming the original thread

- 5x taps for threaded sleeves

- 5x taps for trimming the original thread

- 5x assembly tools for inserting the threaded sleeves

- each 5x threaded sleeves M8 x 1,0 (11 mm long)

M9 x 1,0 (11 mm long)M10 x 1,25 (12 mm long)

M10 x 1,0 (12 mm long)

M10 x 1,0 (19 mm long)

M12 x 1,25 (12 mm long)

M12 x 1,25 (19 mm long)

M12 x 1,25 (26 mm long)

REPAIR KIT FOR GLOW PLUG THREADS

M8-M9-M10-M12

Item 8653

- for repairing the glow plug mounting thread

in the cylinder head

- includes:

- reamer for reaming the original thread

- taps for threaded sleeves

- taps for trimming the original thread

- assembly tools for inserting the threaded sleeves

- 5x threaded sleeves M12 x 1.25 (12 mm long)



REPAIR KIT FOR GLOW PLUG THREADSM12 X 1,25

Item 8651



- includes:







REPAIR KIT FOR GLOW PLUG THREADS

M10 X 1,0 Item 8650



- includes:





- 5x threaded sleeves8647: M8 x 1,0

8648: M9 x 1,0

8649: M10 x 1,25

REPAIR KIT FOR

GLOW PLUG THREADS

Item 8647 Item 8648

Item 8649

24.50€ 24.50€

24.50€

29.10€

29.10€

117.90€

8/9/2019 Oferta Bgs 2015

15/2815

THREAD REPAIR KIT,M5-M12

Item 1950

- 5 HSS-G-taps

- 5 HSS-G-twist drills

- 5 special installation tools

- 5 tang breakers

- 110 thread inserts,

made from stainless steel:

each 25 pieces:

M5x0,80,

M6x1,00,

M8x1,25,M10x1,50

10 pieces:

M12x1,75

M5 x 0,80 M6 x 1,0

M8 x 1,25 M10 x 1,50 M12 x 1,75130x

THREADED INSERTS M8 - M12

Item 8649-1Item 8647-1

M8 x 1,0 (11 mm long)

M10 x 1,0 (12 mm long)

M9 x 1,0 (11 mm long)

M12 x 1,25 (12 mm long)

M10 x 1,25 (12 mm long)

M12 x 1,25 (19 mm long) M12 x 1,25 (26 mm long)

Item 8648-1

Item 8650-1 Item 8651-1 Item 8651-2 Item 8651-3

1.90€ 1.90€ 1.90€

1.90€ 1.90€ 1.90€ 1.90€

69.15€

8/9/2019 Oferta Bgs 2015

16/286

REPAIR KIT FOR

OIL DRAIN SCREWS

Item 123

- 6 taps:

M13x1,25 / M13x1,5 / M15x1,5

M17x1,5 / M20x1,5 / M22X1,5

- 6 screws each:

M13x1,25 / M13x1,5 / M15x1,5

M17x1,5 / M20x1,5 / M22X1,5

- 72 aluminium washers

13 - 15 - 17 - 20 - 22 mm

114x

TAP AND DIE SET,HSS G STEEL

Item 1927- 7 taps set DIN 352 und 7 dies DIN 223 25 x 9 mm

M3 x 0,5 - M4 x 0,7 - M5 x 0,8 - M6 x 1,0 M8 x 1,25 - M10 x 1,5 - M12 x 1,75

- 5 die holders DIN 225 25 x 9mm, Nr. 1-2-3-4-5

- 2 tap wrenches DIN 1814 Nr. Nr. 1 and 2

- 7 HSS drills DIN 338

- 1 srewpitch gauge

- 1 screwdriver

- in solid metal case

44x

44.85€

73.85€

8/9/2019 Oferta Bgs 2015

17/2817

- universal type for all car models

- also for assembly or disassembly of silent bearings,

rubber- and ball bearings

- also suitable for rubber bushes and rotary shaft seals

- smooth running because of high-quality ball bearing

on spindle screw nut

- four 350 mm spindles in M10, M12, M14 und M16

- 20 pressure pads (outerØ x innerØ): 44x34 - 46x36 - 48x38 - 50x40 - 52x42 - 54x44 - 56x46

58x48 - 60x50 - 62x52 - 64x54 - 66x56 - 68x58 - 70x60

72x62 - 74x64 - 76x66 - 78x68 - 80x70 - 82x72

- pressure pads are slotted for visual control

PULL AND PRESS SLEEVE KIT

WITH 4 SPINDLES

Item 1514

- pulling depth up to approx. 105 - 210 - 265 mm,

pulling width up to max. 135 mm

- puller legs are suitable for 2- and 3-leg crossbars (included)

- free moving legs allow internal and external pulling operations

- hardened pulling feet

(width approx. 25 mm, thickness approx. 2 mm)

- 2 spindles 165 + 280 mm with fine thread

PULLER SET, 2- AND 3-LEG

Item 7760

12x

HYDRAULIC PULLER SET

Item 7729

- hydraulic ram

- each 3 legs in following lengths:

100, 150 und 200 mm

- one twin head and one triple head crossbar

- 2 extension rods

10To.

225.50€

149.75€

128.50€

8/9/2019 Oferta Bgs 2015

18/288

OIL FILTER CAP SETItem 8667

- includes the following oil filter cap wrenches:

- 64.5 mm x 14-pt., aluminum chrome finish,

for Toyota Auris, Corolla, Premio, Prius


for Toyota V6 2007-2008

Lexus ES 350, GS 350, GS 350h, LS 460,

RX 350, LS 600j L

- 88.8 mm x 15-pt, aluminum chrome finish,

for Kia and Hyundai


for Audi, BMW, Ford, Mazda, Toyota, Volkswagen,

Porsche, Mercedes V6 / V8


for BMW 335i, 535i, 3 series E90, X6 3.0L,

Volvo 1999-2006

(not 2005 40 and 50 models)

- universal oil filter cap wrench 63 - 83 mm,

SCM 440 chrome finish

- 27 mm x 6-pt., S45C nickel,

for Mercedes and Smart models

- 32 mm x 6-pt., S45C nickel,

for Opel 4-cyl. 2.2 L X10XE, X12XE, Y17DT, Y17DT

and Mercedes OM 364, OM 366

- 36 mm x 6-pt, S45C nickel, for Mercedes Diesel OM604, OM605, OM606,

BMW M52, M60, M70, Mini, VW VR6

9x

WHEEL BEARING TOOL SET

Item 67301

- universal use on most wheel bearings

- allows disassembly and assembly of the wheel hub and the wheel bearings

- includes:

- pressure plates with diameters of :

50 - 55 - 59 - 63.3 - 66.6 - 70.3 - 71.5 -

73.1 - 73.4 - 74.8 - 77.5 - 81.5 - 83.4 mm

- sleeves with following diameters:

76 - 86 - 91 - 102 mm - 3 extractor bolts M12 x 1.5

- 3 extractor bolts M14 x 1.5

- spindle 7/8 „x 300 mm

(including thrust bearing)

- pressure nut 32 x 60 mm

- pressure sleeve Ø 38 x 40 mm

- washer Ø 40 x 3 mm

31x

125€

47.15€

8/9/2019 Oferta Bgs 2015

19/2819

- facilitates the disassembly / assembly of oil drain plugs

- oil drain plugs will be held inside the magnetic sockets

- includes the following sizes:

- 8 - 10 - 12 - 13 - 14 - 17 mm,

for drain plugs with internal 6-pt.

- 8 - 10 mm for drain plugs with internal 4-pt.

- T45 for with E-Star drain plugs- 13 - 14 - 17 - 18 - 19 - 21 mm,

for drain plugs with external 6-pt.

MAGNETIC SOCKETS FOR OIL DRAIN SCREWS Item 2256

15x

application video

END CAP OIL FILTER

WRENCH SETItem 1039

- black finish caps

- three leg oil filter wrench Ø65mm – Ø120mm

- adaptor 3/8“ x 1/2“

- end cap oil filter wrench in following sizes suitable for:

65mm x 14-pt - DAIHATSU, TOYOTA, NISSAN, FIAT

65 / 67mm x 14-pt - DAIHATSU, TOYOTA

66mm x 6-pt - FIAT Punto 1.2, RENAULT

68mm x 14-pt - MAZDA, FORD Escort , SUBARU 73mm x 14-pt - TOYOTA, LEXUS

74mm x 15-pt - AUDI, GM, ROVER, CHRYSLER.

74 / 76mm x 15-pt - FORD, OPEL, VW, AUDI, MERCEDES

75 / 77mm x 15-pt - VW, AUDI, FORD, ISUZU, MERCEDES, OPEL

76mm x 8-pt - FIAT Marea, LANCIA Delta

76mm x 12-pt - FIAT, RENAULT, MERCEDES

76mm x 14-pt - VW, MERCEDES, PORSCHE, BMW, AUDI, OPEL.

76mm x 30-pt - FORD, Motorcraft FL400A

78mm x 15-pt - NISSAN, FORD, TOYOTA.

80mm x 15-pt - NISSAN, HONDA, OPEL, MAZDA

80 / 82mm x 15-pt - SUBARU, TOYOTA, HONDA, MAZDA, NISSAN

86mm x 16-pt - VOLVO S40 / S60 / S70 /S80

86mm x 18-pt - VW, AUDI, RENAULT, PEUGEIOT, CITROEN

90mm x 15-pt - SUBARU, TOYOTA, HONDA, MAZDA, NISSAN

92mm x 10-pt - FIAT, LANCIA 93mm x 15-pt - MAZDA, VOLVO, MITSUBISHI, NISSAN, HONDA

93mm x 36-pt - FORD, Motorcraft FLINFLA 1B, FL3001, FL320

93mm x 45-pt - VW, AUDI

95mm x 15-pt - TOYOTA, ALFA, GM, FORD, CHRYSLER

96mm x 18-pt - VW, RENAULT

100mm x 15-pt - ISUZU, MITSUBISHI

106mm x 15-pt - FIAT Ducato 2.5D

108mm x 15-pt - Volvo Diesel C70 / S70 / N70 / 850 Tdi

108mm x 18-pt - RENAULT Espace / Laguna / Master / Safrane / Traffic 2.4+2.5+2.8D+Tdi

30x

79.40€

58.15€

8/9/2019 Oferta Bgs 2015

20/2820

HAND PUMP

- suitable for engine, gearbox, transaxle oil & coolant

- transparent design for checking fluid

- piston with double sealing rings

- material: composite plasticItem 4067

0,2Liter

application video

Fluorelastomer Seals

available with Item 4067-1 HAND PUMP

Item 4068

- suitable for engine, gearbox, transaxle oil & coolant

- transparent design for checking fluid

- piston with double sealing rings

- material: composite plastic

1,5Liter

application video

Fluorelastomer Seals

available with Item 4068-1

Item 9991- for filling gearboxes and differentials with oil

- new version with second hose for

backflow of excessive oil

- with 8-pc adaptor set with differentangles and thread types

- ideal for filling Mercedes 722.9,

VW / Audi DSG and CVT transmissions

- hose length 160 cm

- can be used up to SAE 140

OIL FILLER TOOL

7Liter

TAILLIGHT REMOVALTOOL SET

Item 8851

2x

FENDER FLARING TOOLItem 3525- for expanding the

fender size

PROFESSIONAL FLARING TOOL

Item 3057

- for flaring of brake and hydraulic pipes

- can be used on copper, brass, aluminium and steel pipes

- for inside and outside flaring

- for coated and non-coated pipes

- incl. 4 pairs of jaws:

3/16“ / 4,75 mm - 1/4“ - 6 mm - 8 mm

14.99€ 33.85€

178.40€

105€

20.40€

181.50€

8/9/2019 Oferta Bgs 2015

21/2821

DEAD BLOW

BUMPING HAMMER

Item 1876

- extra heavy duty for trucks and SUV

- Head Ø 105 mm

- handle length: 780 mm- weight 4500g

TIRE BEAD RETAINER

Item 8658

- facilitates the installation of tires

- made of durable plastic

- protects aluminum rims

ADAPTOR SETItem 199

- 1/4“ int. x 3/8“ ext.

- 3/8“ int. x 1/4“ ext.

- 3/8“ int. x 1/2“ ext.

- 1/2“ int. x 3/8“ ext.

- 1/2“ int. x 3/4“ ext.

- 3/4“ int. x 1/2“ ext.

6x

IMPACT ADAPTOR SET

Item 200- 1/4“ int. X 3/8“ ext.- 3/8“ int. X 1/4“ ext.

- 3/8“ int. X 1/2“ ext.

- 1/2“ int. X 3/8“ ext.

- 1/2“ int. X 3/4“ ext.

- 3/4“ int. X 1/2“ ext.

6x

- allows professional removing of rim locks

- „opens“ almost all rim locks without damaging the rims

- conical dismantling sleeves for high power transmission

- the kit includes:

- dismantling sleeves, length 60 mm with inner diameter:

18 – 19 – 20 – 21 – 22 – 23 – 24 – 25 mm

- 2 dismantling mandrels

- made of S45C and SCM440 material

RIM LOCK DISMANTLING TOOL SET

Item 8656

10x

- for removal of trim, paneling, etc.

- allows a damage-free disassembly,

even on painted surfaces

- wide range of application through different

scraper and removal tool profiles, such as:

- scraper with trim guide

- slotted lever, angled and straight

- disassembly lever, angled and straight,

in different widths

TRIM WEDGES AND SCRAPER SET Item 8611

27x

19.90€

36.99€

20.40€

53.40€

9.50€16.50€

8/9/2019 Oferta Bgs 2015

22/2822

- internal hexagon sockets (hex. drive): 8 and 10 mm

- internal spline bit (hex. drive): M 8 + M 10

- T-Star bits (hex. drive): T 40 and T 50

- 2 assembled and ready-to-go bits T 50 and M 10

with 33 tooth bit

- special tool for Bosch System Alternators

- special tool for Renault System Alternators

- incl. adaptor for:

VW, Audi, Seat, BMW, Mercedes, Ford

ALTERNATOR BIT SETItem 4246

12x

- suitable for checking pressure and vacuum systems

for boost pressure, vacuum solenoid valves,

tank vents, MAP sensors, etc.

- also suitable for brake bleeding

- 63.5 mm pressure / vacuum gauge

- pressure indicator range: +0 to +3 bar

- vacuum indicator range: -0 to -1 bar- max. vacuum: -0.7 bar

VACUUM / PRESSURE PUMP SET Item 8038

max.

3 Bar

- for reworking the injector seat when removing the injectors

- 19 mm hexagon pilot

- 15 x 19 mm reamer fits various makes and models - 17 x 17 mm reamer fits BMW, Peugeot, Citroen, Renault

- 17 x 19 mm reamer fits Mercedes CDI

- 17 x 21 mm offset reamer fits Fiat / Iveco

INJECTOR SEALING CUTTER SET

FOR CDI ENGINES

Item 62605

5x

- with sliding hammer 1,70 kg

- extra short: only 225 mm

- especially for Mercedes-Benz CDI engines

OM 611, 612, 613 .....

- total length 350 mm

- 2 extract adapters M17X1,0 + M27X1,0

CDI INJECTOR EXTRACTOR SET

Item 62635

8x

25.10€

36.99€

50.30€

45.60€

8/9/2019 Oferta Bgs 2015

23/2823

RADIATOR PRESSURE TEST KIT

Item 8027

- suitable for most standard vehicles

- testing range 0-2,5 bar (tolerace +-2%)

14x

- for bleeding low pressure side on Diesel fuel systems

- is required when renewing diesel filters and pump or other

components of the diesel injection system

- prevents defects of high

pressure pumps (CDI)

which frequently occur during

renewing filters without

manual filling- includes 6 different adapter

hoses and hand pump with valve

- suitable for:

Ford, PSA, Opel, Fiat, Rover,

Land Rover, Renault,

Mercedes-Benz

DIESEL BLEEDING / PRIMER KIT

Item 8819

7x

147.50€

139.90€

8/9/2019 Oferta Bgs 2015

24/2824

- dual lifting piston

- durable and lightweight aluminum-steel construction

- rear height: 155 mm

- length: 640 mm

- width: 285 mm

- weight: 26.6 kg

- front castors: Ø 65 mm

- steering castors: Ø 45 mm

ALUMINUMSTEEL HYDRAULIC

FLOOR JACK Item 2889

2,5To. 460mm100mm

GEARBOX LIFTER,

HEAVY DUTY

Item 9233

- for assembling and disassembling engines,

gearboxes and rear axles

- adjustable head plate 60 mm to the side and

from -10° to 35° in inclination, therefore especially

suitable for mounting of automatic transmissions

- height approx. 880 to 1770 mm

- 4 ball bearing caster wheels- fast lifting due to hydraulic foot pedal

- heavy duty

- weight: 80 kg

max.

500 kg

- for compressed air use, can also be operated by hand pump

- max. capacity: 20,000 kg

- base size: 223 x 133 mm

- min. height: 260 mm

- max. height: 510 mm

- adjustable height: 80 mm

- stroke: 170 mm

- working pressure: 8 - 9 bar

- weight: 16.3 kg

AIR HYDRAULIC JACK

Item 2883

20To.

320€

94.50€

170€

8/9/2019 Oferta Bgs 2015

25/2825

- high flame temperature

- suitable for soldering, flambé

- for use in workshop and kitchen

- equipped with piezo-ignition, lock switch and flame size regulator

- can be filled with conventional lighter gas

POCKET GAS TORCH

Item 9872

max.

1300 °C

- for fatigue-free working

- 5 castors for high stability

- padded knee rest

- with storageplate and carryhandle

WHEELED SLIDING KNEEBOARD Item 8807

max.

100 kg

- soft and stable material facillitates your job and protects your knees

- oversized, also suitable as upper body pad


KNEE PROTECTOR Item 4804

max.

100 kg

- can be used as a seat or a creeper

- 6 wheels

- facilitates maintenance and service works


- steel frame, coated

FOLDABLE MECHANIC‘S

CREEPER / SEAT

Item 2850 max.150 kg

max.

130 kg

55.85€

23.55€

33.85€

10.25€

8/9/2019 Oferta Bgs 2015

26/2826

DIGITAL-MULTIMETER,

3 1/2-DIGITItem 63402

WELDING HELMET

Item 8858

- auto darkening

- variable shades #9-#13

- photoelectric inductive control technology

- high quality dual-LCD

- lithium battery and solar cells

- adjustable headband

TECHNICAL SPECIFICATIONS

Viewing Area 92 x 42 mm Arc Sensor 2

Cartridge size 110 x 100 x 9 mm Low Amperage TIG ≥ 5 amp

Light state DIN 4 Grinding Function Yes

Dark state Variable Shade 9 - 13 Low Volume Alarm Yes

Switch time 1/25000 sec. ADF self-check Yes

Dark to Light 0.1 – 1.0 sec. Operating Temperature -5°C - + 55°C

Shade control Extern, Variable Storing Temperature -20°C - +70°C

Sensitivity control Adjustable Weight 480 g

Power On / Off Fully automatic UV/IR Protection DIN 16

Power supply Solar cell, battery change required CR2032

Welding Processes MMA, MIG, MAG/C02, TIG and Plasma Welding, Arc Gouging & Plasma Cutting

- shock resistant plastic protection

- with put-up hinge

- energy saving LCD display

- meets the lastest regulations

- functions:

- DC voltage and AC voltage- resistance

- DC current

- diode forward voltage

- measured value memory button (HOLD)

58.99€

17.25€

8/9/2019 Oferta Bgs 2015

27/2827

- with the newest COB LED light strip technology for bright light

- designed for the professional user

- rechargeable battery

- in 9 positions up to 180° adjustable magnetic feet

- 2 magnets on the backside

- 2 folding hooks

- dimensions: L280 x W62 x D43 mm- LED type: 3W COB LED

- brightness: 250 LM

- working time: approx. 2.5 hours

- IP20 waterproofed

- incl. battery charger

- battery: rechargeable Lithium 3.7V / 2000mAh

COB LED WORKSHOP LAMP

WITH MAGNET AND HOOK

Item 85316

250 Lumen

3 W COB LED

2000 mAh

application video

- for interconnecting hoses,

such as vacuum hoses, return lines, etc.

- Material: POM (Polyoxymethylen)

CONNECTOR ASSORTMENT FOR

RUBBER & PLASTIK HOSES

Item 8790

100x

25x

10x 3 mm

5x 5 mm

3x 6 mm

3x 8 mm

2x 10 mm

2x 12 mm

25x

10x 3 mm

5x 5 mm

3x 6 mm

3x 8 mm

2x 10 mm

2x 12 mm

25x

10x 3 mm

5x 5 mm

3x 6 mm

3x 8 mm

2x 10 mm

2x 12 mm

25x

10x 3 mm

5x 5 mm

3x 6 mm

3x 8 mm

2x 10 mm

2x 12 mm

INJECTOR COPPER RING ASSORTMENT

Item 8120

- for sealing of e.g. ineachctors on Common Rail Diesel ineachction systems (CDI)

13,8x7,3x1,4 mm14,6x7,5x1,3 mm14,6x7,5x3,0 mm15,0x7,0x2,0 mm15,0x7,5x1,0 mm



150x

39.99€

16.50€

13.85€

8/9/2019 Oferta Bgs 2015

28/28

All images, texts and graphic displays Copyright© BGS technic KG. Any use or reproduction only with written permission of BGS technic.

BGS technic®, Kraftmann® & ProTorque® are registered trademarks of BGS technic KG.

XZN®, Ribe® and Torx® are registered trademarks of the respective holders. BGS „T-Star“ system is compatible with Torx® xing systems.

Your specialist retailer:

Sales and distribution through BGS retailers only.

This promotion is only for commercial customers.

PRECIOS IVA INCLUIDO.

HERRAPRO

918417888

WWW.HERRAPRO.ES

WWW.HERRAPRO.COM

Documents

Oferta Bgs 2015