ODISHA SKILL DEVELOPMENT AUTHORITY

ODISHA SKILL DEVELOPMENT AUTHORITY

3rd Floor, Niyojan Bhawan, Unit-III, Bhubaneswar,

Tel : +91 674 2391320, Email : [email protected]

Subject: Proceedings of Virtual Pre – Bid Meeting held on 06th May 2021

Reference: IFB No. Invitation for Bids No.: OSDA/WSC/Goods/M-4/2021 dated 30.04.2021

Ph-IV Shopping Packages under ADB Loan: 3539

1. A Virtual Pre Bid meeting was held on 06th May 2021 at 3 PM in virtual mode (due to Covid–19 travel restrictions) for Shopping packages under procurement of

IV phase Equipment for various labs at World Skill Center Bhubaneswar

2. List of members present in the virtual meeting on behalf of OSDA and bidders is enclosed in Annexure I and II respectively.

3. Dr S. K. Das, GM (Training) welcomed the participants and introduced the project to the prospective bidders present for the pre-bid meeting.

4. The prospective bidders were briefed through a power point presentation containing the key points about the project, packages, instructions for filling of bids etc.

5. It was explained to the bidders that some equipment have been grouped into packages. Bidders are free to participate in any one or multiple packages in

accordance with the instructions, procedures, and the terms and conditions of the RFQ.

6. It was clarified that the bid is invited from eligible and qualified bidder under ADB’s single stage single envelope under shopping procedure which includes no

Processing /tender fees and no supporting document related to financial capability. Only basic information about bidder and contract experience of one similar

contract is required for eligibility.

7. It was informed to the prospective bidders that the duly filled Technical Proposal along with price quotation in specified formats in single envelope is to be

submitted to OSDA office latest by 21.05.2021 at 3 PM. Price Bids shall be opened at 4 PM on same day.

8. The Technical Proposal includes: (1)Duly Filled Bidder’s Information sheet (Annexure 1) (2) Experience Certificate of one contract in the last 5 calendar years

from the date of Quotation Invitation of specified amount of similar nature items.

9. It was clarified that 90% of the contract value shall be released after supply of goods and completion of related services. Remaining 10% of the contract value will

be released after successful training.

10. It was further clarified that the delivery schedule is 90 days from the date of signing of the contract and the warranty of the items will be of minimum 2 years from

the date of issuance of Acceptance Certificate by the Purchaser.

11. It was also explained that conditional offers and late bids will not be accepted.

12. Brands /make/ models/photographs for any equipment, if specified are indicative only. The bidder is free to offer equivalent equipment of other

brands/makes/models subject to fulfilment of technical specifications provided in the bidding documents.

13. After the presentation some prospective bidders raised some queries which were taken up by the officers of OSDA and ADB procurement expert.

14. Some prospective bidders sought clarification on the specification in more detail manner. It was suggested that, the prospective bidders should send their queries

in OSDA mail by 12 Noon of 7th May 2021. These queries shall be compiled and addressed in the form of a corrigendum document and shall be uploaded in the

website for information of all prospective bidders.

15. Many bidders requested to extend the last date of bid submission in the context of the present Covid -19 situation in the state & country. They told, moreover due

to lockdown till 19th May in Odisha and other many states, it may not be possible for them to submit the quotations physically in the OSDA office within the

present last date I,e. 21.5.2021. They were advised that they shall be informed regarding this after due consultation with appropriate authority.

16. The meeting ended with a vote of thanks to the chair and the members.

Encl : Annexure -I (List of members on behalf of OSDA) Annexure -II (List of Prospective Bidders with contact details) Annexure -III (Corrigendum)

-SD-

Chief Executive Officer Odisha Skill Development Authority

Annexure -I

LIST OF OFFICIALS ON BEHALF OF OSDA

(Screenshot of the Virtual Meeting attached in ANNEXURE – IV)

1. Dr S.K.Das, GM Training

2. Sri Sanjay Padhi, GM Project

3. Sri Bibhu Prasad Beura, GM Finance

4. Sri S.K.Goyal, ADB Procurement expert

5. Ms Sushree Sasmita Sahoo, Trainer (ACR), WSC

6. Ms Shubhangee Mishra, Trainer (ACR), WSC

7. Ms Shivanee Prusty, Trainer (Mechatronics), WS

8. Shri Hrudananda Nayak, Trainer (MES), WSC

9. Ms Chinmayee Sabata, Trainer (MES), WSC

10. Ms Parthavi Padhy, Trainer (Mechatronics), WSC

11. Shri Manas Ranjan Parija, Trainer (ACR), WSC

ANNEXURE - II

LIST OF PROSPECTIVE BIDDERS WITH CONTACT DETAILS

(Screenshot of the Virtual Meeting attached in ANNEXURE – IV)

Sl.

No. Name of the Bidder Name of the Representative Email ID Contact No.

1 M/S Lincoln electric Mr. Nipin [email protected] 9789995606

2 M/S Lincoln electric Mr. Kanhu [email protected]

3 M/S Scientech Mr. Nitin Jain [email protected] 9755591500

4 M/S Scientech Mr. Gigo Mathew [email protected]

5 M/S Schneider Electric Mr Amarnath Durgale [email protected] 7947116187

6 M/S Tesca Technologies Pvt. Ltd. Mr. Ashutosh [email protected] 9413330765

7 M/S Tesca Technologies Pvt. Ltd. Mr. Prshant Gogia [email protected]

8 M/S Anshuman Tech Mr. V Ravi [email protected]

9 M/S Techmech Engineers Mr. Niranjan [email protected]

10 M/S Techmech Engineers Ms. Shanthi Sree [email protected]

11 M/S Techmech Engineers Ms. Pushpa Punitha [email protected]

12 M/S Techmech Control Mr K. Ananta [email protected] 9900250083

13 M/S Royal Electronics Sales & Services Mr Tejas Patel [email protected] 9723557876

ANNEXURE – III (CORRIGENDUM)

CORRIGENDUM

Sl. No.

Package Description/Clause

number Bidder’s query/item where modification is proposed OSDA Response/modification

1 Common

for all

packages

Last date of Submission

Extension in the last date of Submission The last date of submission is hereby extended to 10th June 2021-3:00PM (IST). The single envelope consisting of duly filled Technical Proposal along with price quotation received from bidders will be opened on 10th June 2021-4:00PM (IST)

2 Common

for all

packages

Manufacturer’s Authorization

If any bidder offers products and tools from big reputed brands, is submission of their authorization certificate necessary? Mostly big brands usually don't provide authorizations on case to case basis.

The bidder can submit authorization from dealer/distributor/manufacturer affiliates (as the case may be).

3 Common

for all

packages

Contractual Experience

Can a bidder submit contractual experience in more than one contracts which are of similar nature?

One contractual experience of more than required minimum amount in the last 5 calendar years from the date of invitation of RFQ with similar nature is required to be submitted.

4 Common

for all

packages

Part/Complete Package

Do we have to quote for every item in the package? Yes, Quoting for each and every item is mandatory. No item can be left out. The price of the package shall be calculated by adding quoted cost of all the items of the RFQ.

5 23 Item 3 of Attachment 3: Technical Specifications- Micro-Controller Training Model for

Which microcontroller needed? 8051 microcontroller Or PIC microcontroller?

Arduino UNO R3

A. Purpose and application of baking system? B. Need More Details about the system, like Application,

Process, Aim, Features.

The objective is to simulate the baking process in the kitchen where they are conveyors (to bake the cookies) and fans to cool down. Refer to Annexure-A for details of working.


Baking System

Also as per tender specification, shall bidder quote price of the system as a whole or you want us to quote the components independent of system?

Price for the Sl. No. 3. Micro-Controller Training Model for Baking System can be quoted in both ways. Either as a whole operational system which must include all the items from Sl. No. 3.1 to 3.10 or for every item separately.

6 Item 3.1 of Attachment 3: Technical Specifications- Micro-Controller Training Model for Baking System

Training board to have all the components as mentioned in the below details and the board to be supplied should be in operational/assembled form or loose form? Item no. 3.2 to 3.10 to be supplied additionally to 3.1?

Yes, Sl. No. 3.1 - Training unit board is the training model which should contain all the components mentioned in Sl. No. 3.2 to 3.10 and it should be operational/assembled form.

Sl. No. 3.1 is the training board only which will be assembled with items from Sl. No. 3.2 to 3.10.

7 Item 3.10 of Attachment 3: Technical Specifications- Electrical components for Micro-Controller Training Model for Baking System

Electronic components

Arduino UNO R3, 1pc

Resistor 220ohm, 1/4W, 10pcs

Diode, 10pcs

Prototyping board, 5” x 3”, 2pcs

LED, 2pcs

Push button, NO, 2 pcs

Terminal block, 8 way Cables

May be read as: Electronic components

Arduino UNO R3, 1pc

Resistor 220ohm, 1/4W, 10pcs

Diode, 10pcs

Prototyping board, 5” x 3”, 2pcs

LED, 2pcs

Push button, NO, 2 pcs

Terminal block, 8 way

Cables

8 Item 4 of Attachment 3: Technical Specifications. Micro-Controller Training Model for Traffic Light Control System

A. Need More Details about the system, like Application,

Process, Aim, Features.

B. Please clarify that you require supply in loose form or

in assembled form

A. The traffic light system is designed using Arduino UNO R3 /PIC microcontroller, power section, crystal oscillator and light emitting diode (LED). The developed traffic light control system shall be tested by constructing a prototype that resembles the real application which can also be employed as a training kit in learning traffic light control system design and operation. Refer to Annexure-A for details of working.

B. The training Model is to be supplied in assembled form.


9 33

Item 1 of Attachment 3: Technical specifications- Common Tools

Common Tools Each lot shall consist of 10 number of following items:

Wire stripper

Shear, Pruning

Side cutter

Combination plier

Hacksaw

Handsaw (Junior)

Dot punch

File

Scriber

Hammer

Cutter uPVC

Screwdriver, Flat

Screwdriver, Philip

Contact test pen

Measuring tape (5M)

Engineering try square 6” Blade with 45 angle

Safety goggles Detailed specification of every item as given in the document

Common Tools Along with the items mentioned, Each lot shall also consist of 10 number of following two additional items:

Steel rule (300mm) - 300mm, 25mm wide with one round end and eye-hole - Stainless steel, matt finished - mm and inch graduations, on both sides - Metric: 1.00mm - Imperial 1/16.

Brush - Cleaning brush with dust pin

10 Item 4 of

Attachment 3: Technical specifications- Miter saw

Please specify the accessories required. The saw should come with all the accessories. Meant for cutting trunking.

11 Item 6. Punch down tool

Quantity – 1 No. Quantity – 40 Nos.


12 Item 7. Cable cutter 100 mm


13 Item 8. Cable jacket stripper


14 Item 9. Crimping tool


15 Item10. Wire map tester


16 Item 14, 29 and 36 of Attachment 3: Technical specifications- Hand tools - For electrical installation work, non-conventional and special electrical systems and motors

Common Tools Each lot shall consist of 10 number of following items: - Wire stripper - Shear, Pruning - Side cutter - Combination plier - Hacksaw - Handsaw (Junior) - Dot punch - File, Flat - Scriber - Hammer, cross-pein (8oz) - Cutter uPVC - Screwdriver, Flat - Screwdriver, Philip - Contact test pen - Measuring tape (5M) - Steel rule (300mm) - Engineering try square 6” Blade with 45 angle

List modified after adding two additional items : Common Tools Each lot shall consist of 10 number of following items:

Wire stripper

Shear, Pruning

Side cutter

Combination plier

Hacksaw

Handsaw (Junior)

Dot punch

File , Flat

Scriber

Hammer

Cutter uPVC

Screwdriver, Flat

Screwdriver, Philip

Contact test pen

Measuring tape (5M) Steel rule (300mm)

Engineering try square 6” Blade with 45 angle Safety goggles

Brush


The detail specifications of each item must be same as “Item 1.Common Tools” of the Package.

17 Item 16 of Attachment 3: Technical specifications- Bench grinder

Quantity – 2 No. Quantity – 1 No.

18 Item 23. Bearing extractor

Related picture The extractor is for extracting the bearing from the motor.

19 36

Throughout the document

FT-MES/ FT-VT/ Electrical Services To be read as: FT-ACR/FT-MES/ FT-VT/ Electrical Services

20 Throughout the document

FT-ACR/ Piping & Plumbing Services To be read as: FT-MES/ Piping & Plumbing Services

21 Throughout the document

FT-ACR/ Building Management Systems To be read as: FT-ACR/ Commercial air-conditioning

22 Item 13 of Attachment 3: Technical Specifications- Battery operated drill

• Approximate 230V 50Hz, 600W – Operating voltage

not possible. It is battery operated so, Voltage will be

12V OR 18V OR 36V DC only. As per need

• keyed chuck – Not possible in battery operated drill. It

will be key less auto locked chuck

The specifications are modified as follows: Drill - 18V Charger 230 V AC

Keyless chuck

23 Item 22 of Attachment 3: Technical

For the Distribution board please specify the switchgear

ratings.

Single Phase Double Pole 63 A MCB , 63A RCCB, 32 A MCB, 20 A MCB, 16A MCB


Specifications-Distribution board

24 Item 30 of Attachment 3: Technical Specifications-Heater, approved electric storage type, 40 L

Request for image

25 Item 31 of

Attachment 3: Technical Specifications-Heater, approved electric instantaneous type for water,1 kW, 2 kW & 3 kW settings

Request for image

26 37 Item 3 of

Attachment 3: Technical Specifications- Centrifugal Water-pump

A. Is electrical starter panel required?

B. What is the total head, flow rate and speed?

C. Is motor single phase or 3 phase?

D. Approximate motor KW/HP and operating voltage?

E. Is motor type IE-2 or IE3?

F. What is the material of construction for pump, casing,

pump shaft and pump internal?

A. No, there’s no need for electrical starter panel B. To be used to identify, rectify defect and maintenance only. It’s

upto the bidder to quote accordingly. C. Motor should be Single Phase. D. 1kW/1.5HP E. Motor type-IE2 F. The material to be used for construction-Cast iron. Must have

Packaging seal.

27 Item 4 of Attachment 3: Technical Specifications-

Thickness of MS Plate required. Thickness of MS Plate must be atleast 8mm.


Water Tank

28 40 Item 11 of Attachment 3: Technical Specifications- Pumping System

Pumping System comprising of: - Water tank, stainless steel, 600 x 600mm, height 1000mm with outlet, cover with door opening, outlet valve, drain off and drain-off valve - 2 numbers 230V single phase ≥1 hp pump with Ø50mm delivery pipe - Water to be re-circulating - C/w control valves, check valves, strainers, hammer arrestors, pipe supports, brackets and isolator

The detailed specifications of the item is modified and attached as Annexure B with the Corrigendum: The Pumping system shall consist of the following items:

I. GRP Potable Water Storage Cistern (with partition)-01 set II. GRP Potable Water Storage Cistern (without partition)--01 set

III. Duplex Horizontal Transfer Pumpsets -05 sets IV. Control Panels for Duplex Horizontal Transfer Pumpsets-05

sets V. Duplex Vertical Booster Pumpsets-05 sets VI. Control Panels for Duplex Vertical Booster Pumpsets--05 sets

VII. Duplex Vertical booster pump with variable speed drive and control panel-01 set

29 41 Item 14 of Attachment 3: Technical Specifications- Thermometers (Dial type)

Thermometers-Detailed Specification Missing Thermometers Dial type To be used on air-conditioner coil 1-3/4 inch diameter dial Stainless steel Analogue, dual scale readings Bottom mount 150mm length probe Range: -40 to 60°C

30 42 Item 1 of Attachment 3: Technical Specifications- Common Hand Tools

Common Hand Tools

Consists of 20 nos of the following items: - Ball-pein hammer - Cross-pein hammer - Mallets - Pliers

The list of items with their detailed specifications of each item are as follows: All the below items are required in 20 nos. each kept in 20 suitable carrying case/tool box.

1. Ball-pein hammer 1.5 lb


- Flat Screwdrivers: - Philip screwdriver - Adjustable spanners - Open end spanners - Shears - File - Measuring tape - Steel rule - Tri-square - Scale rule Detailed Specifications Missing

• Overall length: 300mm • High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip

2. Cross-pein hammer 0.5 lb • Overall length: 250mm • High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip

3. Mallets 1 lb • Approx Overall length 330mm. • Circular face, 65mm. • Wooden/fibreglass handle with non-slip grip

4. Pliers

Size: Approx 170mm overall length Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Material: Chromium nickel and hardened steel cutting · Finish: Fully Polish Finish · Handles: Insulated mould

5. Flat Screwdrivers

Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips


· Slotted, · Size: Set of 5 sizes, one each. Approx. 3 x 120mm,4x150mm,5.5x150mm,6.5x200mm and 8x250mm

6. Philip screwdriver

Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips · Philip, Set of 8, · Size: Approx #0 x 125mm,#1x100mm,#1x150mm #2x150mm,#2x200,#2x250mm,#3x200mm,#3x250mm

7. Adjustable spanners

Forged, chrome vanadium, chrome plated and fully · Hardened, tempered jaws and mm graduation. • Range: 6 piece set • Forged, chrome vanadium, chrome plated and fully polished • Hardened, tempered jaws and mm graduation. • Each set to comprise the following 6 items: - 1 number of 150mm (6") - 1 number of 200mm (7.87")


- 1 number of 250mm (9.8") - 1 number of 300mm (11.8") - 1 number of 380mm (15") - 1 number of 450mm (17.7")

8. Open end spanners

Metric, 8 piece set • Forged, chrome vanadium, chrome plated and fully polished • hardened, tempered jaws • Open ends set at 15 degree. • Each set to comprise the following 8 items: - 1 number of 6 x 7mm. - 1 number of 8 x 9mm. - 1 number of 10 x 11mm. - 1 number of 12 x 13mm. - 1 number of 14 x 15mm. - 1 number of 16 x 17mm. - 1 number of 18 x 19mm. - 1 number of 20 x 22mm • c/w plastic clip


9. Shears For stripping electrical wire • Approx: 180mm overall length • High carbon steel, straight blades • Rubber coated handle • c/w spring return and lock device for handle

10. File - flat, round and triangle (200mm)

Flat

Round

Triangle


11. Measuring tape · 5.0m X 25mm width metal tape · Lockable, retractable · c/w plastic casing and carrying strap

12. Steel rule • 300mm, 25mm wide with one round end and eye-hole • Stainless steel, matt finished • mm and inch graduations, on both sides • Metric: 1.00mm • Imperial 1/16.

13. Tri-square · Engineering try square 6” blade · All metal · 150mm blade · 90 degree and 45 degree level · Grade B, notched · Hardened steel blade · Cast zinc handle · c/w graduations in mm and inch on blade


14. Scale rule • 1000mm (L) x 30 (W) x 1.2mm (T) with one round end and eye-hole • Stainless steel, matt finished • mm and inch graduations, on both sides • Metric: 1.00mm • Imperial 1/16.

31 Item 2 of Attachment 3: Technical specifications- Common Hand Tools

Consists of 20 nos of the following items: - Round files - Flat files - Gimlets - Junior type Hacksaws - Standard-type Hacksaw - Ball-pein hammer - Cross-pein hammer - Mallets - Pliers - Flat Screwdrivers: - Philip screwdriver - Side-Cutters - Adjustable spanners - Open end spanners - Measuring tape - Steel rule - Shears - Tri-square - Oxy-Acetylene Cylinder keys Detailed Specifications Missing

The list of items is modified by excluding some items. The modified list of items with detailed specifications of each item are as follows: All the below items are required in 20 nos. each kept in 20 suitable carrying case/tool box.

1. Round files , second cut • 200mm blade, Double cut • Steel, case hardened • Handle: non-wood, high impact plastic with good ergonomic grip • c/w eye-hole for storage

2. Flat files , second cut • 250mm blade, Double cut • Steel, case hardened • Handle: non-wood, high impact plastic with good ergonomic grip • c/w eye-hole for storage

3. Junior type Hacksaws • Blade length: approx 150mm • Heavy duty frame (wire frame not acceptable) with pistol grip • c/w 32 TPI blade and 10 numbers of spare blades per saw


4. Standard-type Hacksaw

· Blade length: approx 300mm · Overall Assembly Length: 460 mm approx. · Pistol grip handle · Steel adjustable frame · c/w 24 TPI flexible blade including 5 numbers of spare

5. Ball-pein hammer

1.5 lb • Overall length: 300mm • High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip




8. Pliers



Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips · Slotted, · Size: Set of 5 sizes, one each. Approx. 3 x 120mm,4x150mm,5.5x150mm,6.5x200mm and 8x250mm


Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips


· Philip, Set of 8, · Size: Approx #0 x 125mm,#1x100mm,#1x150mm #2x150mm,#2x200,#2x250mm,#3x200mm,#3x250mm

11. Side-Cutters

• Insulated • Diagonal type • Approx 170mm overall length • Drop-forged & heat treated head • Cutting capacity: 1.6mm diameter • Material: Chromium nickel and hardened steel cutting face • Handles: Insulated mould


Forged, chrome vanadium, chrome plated and fully · Hardened, tempered jaws and mm graduation. • Range: 6 piece set 5 Set • Forged, chrome vanadium, chrome plated and fully polished


• Hardened, tempered jaws and mm graduation. • Each set to comprise the following 6 items: - 1 number of 150mm (6") - 1 number of 200mm (7.87") - 1 number of 250mm (9.8") - 1 number of 300mm (11.8") - 1 number of 380mm (15") - 1 number of 450mm (17.7")





16. Steel rule • 300mm, 25mm wide with one round end and eye-hole • Stainless steel, matt finished • mm and inch graduations, on both sides • Metric: 1.00mm • Imperial 1/16.

14. Shears For stripping electrical wire • Approx: 180mm overall length • High carbon steel, straight blades • Rubber coated handle • c/w spring return and lock device for handle


15. Tri-square

· Engineering try square 6” blade · All metal · 150mm blade · 90 degree and 45 degree level · Grade B, notched · Hardened steel blade · Cast zinc handle · c/w graduations in mm and inch on blade

32 Item 3 of

Attachment 3: Technical Specifications- Common Hand Tools

Modification in the quantity of each item in the list All the items mentioned in the detailed specifications of the item are required in 20 nos. each kept in 20 suitable carrying case/tool box.

33 Item 4 of Attachment 3: Technical Specifications- Common Hand Tools

Consists of 20 nos of the following items: • Pliers • Flat screwdrivers • Philip screwdriver • Side-cutters • Adjustable spanners

The list of items is modified by excluding some items. The modified list with detailed specifications of each item are as follows: All the items are required in 20 nos (except Wire Stripper, Crimping Tool & Adjustable spanner, which are required 40 Numbers each). Each item to be kept in 20 suitable carrying case/tool box.


• Open end spanners • Measuring tape • Steel rule • Wire Stripper • Crimping Tool • Adjustable spanner Detailed Specifications Missing

1. Pliers Size: Approx 170mm overall length Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Material: Chromium nickel and hardened steel cutting · Finish: Fully Polish Finish · Handles: Insulated mould

2. Philip screwdriver Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips · Philip, Set of 8, · Size: Approx #0 x 125mm,#1x100mm,#1x150mm #2x150mm,#2x200,#2x250mm,#3x200mm,#3x250mm

3. Side-cutters

• Insulated • Diagonal type • Approx 170mm overall length • Drop-forged & heat treated head • Cutting capacity: 1.6mm diameter


• Material: Chromium nickel and hardened steel cutting face • Handles: Insulated mould





6. Steel rule • 300mm, 25mm wide with one round end and eye-hole • Stainless steel, matt finished • mm and inch graduations, on both sides • Metric: 1.00mm

• Imperial 1/16.

7. Wire Stripper · For electrical wiring work use · Overall length: approx. 180mm · Cable insulation stripper with handles lockable · Spring loaded · Suitable for wire gauge AWG 22 ~10(0.5mm2 ~ 4mm2 cable)

8. Crimping Tool

· Use as crimping insulated electrical wire terminal lugs, wire cutter and cable stripper · Suitable for cable size of 1.5, 2.5, and 6mm2


9. Adjustable spanner

Forged, chrome vanadium, chrome plated and fully · Hardened, tempered jaws and mm graduation. • Range: 6 piece set 5 Set • Forged, chrome vanadium, chrome plated and fully polished • Hardened, tempered jaws and mm graduation. • Each set to comprise the following 6 items: - 1 number of 150mm (6") - 1 number of 200mm (7.87") - 1 number of 250mm (9.8") - 1 number of 300mm (11.8") - 1 number of 380mm (15") - 1 number of 450mm (17.7")

34 Item 5 of

Attachment 3: Technical Specifications-Common Hand Tools

Consists of 20 nos of the following items: • Round files • Flat file • Gimlets •Junior type Hacksaws • Standard-type Hacksaw • Ball-pein hammer • Cross-pein hammer

The list of items is modified by excluding some items. The modified list with detailed specifications of each item are as follows: All the below mentioned items are required in 20 nos each kept in 20 suitable carrying case/tool box

1. Round files second cut • 200mm blade, Double cut • Steel, case hardened


• Mallets • Pliers • Flat Screwdrivers: • Philip screwdriver • Side-Cutters • Adjustable spanners • Open end spanners •Measuring tape • Steel rule • Wire Stripper • Crimping Tool • Insulated side cutter (wire cutter) • Insulated Combination Pliers • Insulated Long Nose Pliers • Soldering Iron • F-Shape spanners • Shears • Tri-square • Oxy-Acetylene Cylinder keys • Spark gun • Box spanner • Pipe wrench • PVC cutter Detailed Specifications Missing

• Handle: non-wood, high impact plastic with good ergonoic grip

• c/w eye-hole for storage

2. Flat file second cut • 250mm blade, Double cut • Steel, case hardened • Handle: non-wood, high impact plastic with good ergonoic grip • c/w eye-hole for storage

3. Junior type Hacksaws • Blade length: approx 150mm • Heavy duty frame (wire frame not acceptable) with pistol grip • c/w 32 TPI blade and 10 numbers of spare blades per saw

4. Standard-type Hacksaw

· Blade length: approx 300mm · Overall Assembly Length: 460 mm approx. · Pistol grip handle · Steel adjustable frame · c/w 24 TPI flexible blade including 5 numbers of spare

5. Ball-pein hammer

1.5 lb • Overall length: 300mm


• High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip



8. Pliers



Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips · Slotted,


· Size: Set of 5 sizes, one each. Approx. 3 x 120mm,4x150mm,5.5x150mm,6.5x200mm and 8x250mm


Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips · Philip, Set of 8, · Size: Approx #0 x 125mm,#1x100mm,#1x150mm #2x150mm,#2x200,#2x250mm,#3x200mm,#3x250mm

11. Side-Cutters

• Insulated • Diagonal type • Approx 170mm overall length • Drop-forged & heat treated head • Cutting capacity: 1.6mm diameter • Material: Chromium nickel and hardened steel cutting face • Handles: Insulated mould



Forged, chrome vanadium, chrome plated and fully · Hardened, tempered jaws and mm graduation. • Range: 6 piece set 5 Set • Forged, chrome vanadium, chrome plated and fully polished • Hardened, tempered jaws and mm graduation. • Each set to comprise the following 6 items: - 1 number of 150mm (6") - 1 number of 200mm (7.87") - 1 number of 250mm (9.8") - 1 number of 300mm (11.8") - 1 number of 380mm (15") - 1 number of 450mm (17.7")


Metric, 8 piece set • Forged, chrome vanadium, chrome plated and fully polished • hardened, tempered jaws


• Open ends set at 15 degree. • Each set to comprise the following 8 items: - 1 number of 6 x 7mm. - 1 number of 8 x 9mm. - 1 number of 10 x 11mm. - 1 number of 12 x 13mm. - 1 number of 14 x 15mm. - 1 number of 16 x 17mm. - 1 number of 18 x 19mm. - 1 number of 20 x 22mm • c/w plastic clip


15. Steel rule • 300mm, 25mm wide with one round end and eye-hole • Stainless steel, matt finished


• mm and inch graduations, on both sides • Metric: 1.00mm • Imperial 1/16.

16. Wire Stripper · For electrical wiring work use · Overall length: approx. 180mm · Cable insulation stripper with handles lockable · Spring loaded · Suitable for wire gauge AWG 22 ~10(0.5mm2 ~ 4mm2 cable)

17. Crimping Tool

· Use as crimping insulated electrical wire terminal lugs, wire cutter and cable stripper · Suitable for cable size of 1.5, 2.5, and 6mm2

18. Insulated side cutter (wire cutter)

• Diagonal type • Approx 170mm overall length • Drop-forged & heat treated head • Cutting capacity: 1.6mm diameter • Material: Chromium nickel and hardened steel cutting face • Handles: Insulated mould


19. Insulated Combination Pliers

· Size: Approx 170mm overall length Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Material: Chromium nickel and hardened steel cutting · Finish: Fully Polish Finish · Handles: Insulated mould

20. Insulated Long Nose Pliers

· Size: Approx 165mm overall length · Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Chromium nickel and hardened steel cutting face · Finish: Fully Polish Finish · Handles: Insulated mould


21. Soldering Iron

• Adjustable temperature • Pointed soldering iron tip • Iron holder, on/off switch, adjustable 5 to 10W and cleaning sponge in 1 unit • c/w 1 spare tip and approved power cord with fused 13A plug, 230 Volts AC

22. Shears

For stripping electrical wire • Approx: 180mm overall length • High carbon steel, straight blades • Rubber coated handle • c/w spring return and lock device for handle


23. Tri-square

· Engineering try square 6” blade · All metal · 150mm blade · 90 degree and 45 degree level · Grade B, notched · Hardened steel blade · Cast zinc handle · c/w graduations in mm and inch on blade

24. Spark gun

Material-Stainless Steel

Electronic igniter-Safe and Reliable

long shaft for safe ignition distance


25. Box spanner • Tubular • Metric • 8 piece set - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 21 x 23 - 24 x 26

26. Pipe wrench

· Stilson type · Approx 12 inch · Drop-forged handle · Hardened teeth · c/w adjusting nut and hook jaws

27. PVC cutter

· For galvanised steel pipe or electrical metal conduit · 1/8 to 2 inch pipe · Heavy duty wide roller type for better tracking · c/w wheel cutter and 2 spare.


35 43


Item 5: Common tools Quantity – 20 sets

Item 5: Common tools Quantity– 1 set

36 Item 2.50 of Attachment 3: Technical Specifications- Tongs, Welding

Quantity missing Quantity – 20 nos.

37 Item 4.9 of Attachment 3: Technical Specifications-Chasis Puncher

Detail Specification missing Chasis Puncher

Set of 5

For 16, 18, 21, 25, 30mm external diameter

Including reamer

HSS material

suitable for removing mechanical seals

38 Item 4.30 of

Attachment 3: Technical Specifications-Insulated Combination Plier


39 Item 4.31 of Attachment 3: Technical Specifications-



Insulated Long Nose Plier

40 Item 5.1 of Attachment 3: Technical Specifications-Automatic wire stripper

Quantity missing Quantity – 40 nos

41 Item 5.2 of Attachment 3: Technical Specifications-Crimping tool

Quantity missing Quantity – 40 nos

42 46


FT-MES/ FT-VT/ Electrical Services To be read as: FT-ACR/FT-MES/ FT-VT/ Electrical Services

43 Item 2 of Attachment 3: Technical Specifications- Mechanical Lifting Jack

Detail Specification missing Hand pallet, Capacity:2000 kg

1200mm length * 150mm width for each fork

Approx: 650 mm width of truck with double rollers

44 Item 31 of

Attachment 3: Technical Specifications- Tile cutter

Detail Specification missing 240V, 50Hz, 500W

C/w dry cutter and accessories


45 Item 37 of Attachment 3: Technical Specifications-Gasket hand lever punch

Image missing

46 Item 38 of

Attachment 3:

Technical

Specifications-

Bearing pulling

attachment

Image missing

47 Item 39 of

Attachment 3:

Technical

Specifications-

Metal jack plane

Image missing

48 Item 72 of

Attachment 3:

Technical

Specifications-

Cutter, GI pipe, dia

10 - 75 mm, single

wheel cutting blade

Image missing


49 Item 73 of

Attachment 3:

Technical

Specifications-

Cutter, for copper

tube, quick action

stock 3-32mm

Image missing

50 Item 75 of

Attachment 3:

Technical

Specifications-

Expander kit,

(Swagging) for

water supply copper

tube, single-stage,

free-floating and

self-centring

mechanism

Image missing

51 47

Item 10 of Attachment 3: Technical Specifications- Torque wrench

Quantity – 15 Nos. Quantity – 10 Nos.

52 Item 23 of Attachment 3: Technical Specifications- Torque wrench

Quantity – 15 Nos. Quantity – 5 Nos.

53 Item 24 of Attachment 3: Technical Specifications-

Common hand tools: - Adjustable spanner (300mm) - Open-end spanner - Screwdriver, slotted

The list of items is modified by excluding/adding some items. The new list with detailed specifications of each item is as follows: Common hand tools: Each set consists of 1 no. of each of the following items:


Common hand tools 5.5 x 150 mm 6.5 x 200 mm 8 x 250 mm - Screwdriver, Philips 2 x 250 mm 3 x 200 mm 3 x 250 mm - Allen Key Set (Metrix) - Combination plier (170mm) - Long nose plier (160mm) - Tubing cutter - Screw Driver, Torx, T10 Detailed Specification missing

24.1 Adjustable spanner (100-150mm)

24.2. Open-end spanner (set) Metric, 6 pieces per set • Deep crank, 12 pt • Forged, chrome plated and fully polished • hardened and tempered • Each set to comprise the following 6 items: - 1 number of 10 x 11mm. - 1 number of 12 x 13mm. - 1 number of 14 x 15mm. - 1 number of 16 x 17mm. - 1 number of 18 x 19mm. - 1 number of 20 x 22mm. • c/w wall mountable plastic rack.

24.3. Allen Key Set (Metrix)

Range, 13 piece set

L-shaped

One ball end

Chrome vanadium or black

c/w plastic case/holder

Sizes include: 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 8 and


10mm

24.4. Combination plier (170mm)

Size: Approx 170mm overall length

Drop-forged & heat treated head, serrated jaws

Cutting capacity: 1.6mm diameter

Material: Chromium nickel and hardened steel cutting

Finish: Fully Polish Finish

Handles: Insulated mould

24.5. Long nose plier (160mm)

Size: Approx 160mm overall length

Drop-forged & heat treated head, serrated jaws

Cutting capacity: 1.6mm diameter

Chromium nickel and hardened steel cutting face

Finish: Fully Polish Finish

Handles: Insulated mould


24.6. Plastic Tubing cutter

54 Item 26 of

Attachment 3: Technical Specifications- Portable Drill

Quantity – 2 nos. The item is now deleted from the package.

55 Item 28 of Attachment 3: Technical Specifications- Common tools

Common Tools Include each of the following items: - Wire stripper - Shear, Pruning - Side cutter - Combination plier - Hacksaw - Handsaw (Junior) - Dot punch - File, Flat - Scriber - Hammer, cross-pein (8oz) - Cutter uPVC - Screwdriver, Flat - Screwdriver, Philip - Contact test pen - Measuring tape (5M) - Steel rule (300mm) - Engineering try square 6” Blade with 45 angle - Safety goggles - Brush

The list of items is modified by excluding/adding some items and after making certain changes in the detailed specifications. The new list with detailed specifications of each item is as follows: Common tools Each set include 1 no. of the following items:

28.1. Wire stripper · For electrical wiring work use · Overall length: approx. 180mm · Cable insulation stripper with handles lockable · Spring loaded · Suitable for wire gauge AWG 22 ~10(0.5mm2 ~ 4mm2 cable)

28.2. Shear, Pruning (10x) For stripping electrical wire


•Approx: 180mm overall length • High carbon steel, straight blades • Rubber coated handle • c/w spring return and lock device for handle

28.3. Side cutter (110 to 150mm) • Drop-forged & heat treated head • Cutting capacity: 1.6mm diameter • Material: Chromium nickel and hardened steel cutting face • Handles: Insulated mould

28.4. Combination plier 170mm · Size: Approx 170mm overall length · Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Material: Chromium nickel and hardened steel cutting · Finish: Fully Polish Finish · Handles: Insulated mould


28.5. Hacksaw (300mm) · Blade length: approx 300mm · Overall Assembly Length: 460 mm approx. · Pistol grip handle · Steel adjustable frame · c/w 24 TPI flexible blade including 5 numbers of spare

28.6. Handsaw (Junior) (150mm) • Blade length: approx 150mm • Heavy duty frame (wire frame not acceptable) with pistol grip • c/w 32 TPI blade and 10 numbers of spare blades per saw

28.7. Dot punch (for metal) · Length: approx. 100mm X 3mm diameter tip · Heavy duty tool steel, hardened & tempered point · Point angle 60°

28.8. File, Flat (200mm)


Steel, case hardened

Handle: non-wood, high impact plastic with good ergonoic grip

c/w eye-hole for storage

28.9. Scriber

Two-point

220mm overall length

straight and bent pointed, hardened and tempered steel c/w knurled grip

28.10. Hammer, cross-pein (8oz) • Overall length: 300mm • High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip

28.11. Screwdriver, Flat (200-220mm)

corrosion resistance, chrome, magnetic and hardened tips


28.12. Screwdriver, Philip (200-220mm) corrosion resistance, chrome, magnetic and hardened tips

28.13. Contact test pen (120-140mm) • Testing AC Voltage: 100 to 500V • Built-in neon lamp • Plastic handle, tempered steel shaft with screwdriver blade • CE certified

28.14. Measuring tape (5M) · 5.0m X 25mm width metal tape · Lockable, retractable · c/w plastic casing and carrying strap

28.15. Steel rule (300mm)


• 300mm, 25mm wide with one round end and eye-hole • Stainless steel, matt finished • mm and inch graduations, on both sides • Metric: 1.00mm • Imperial 1/16.

28.16. Engineering try square (200mm)

28.17. 6” blade with 45 angle

28.18. Safety spectacles • Spectacle design or fit-over type • Lens & Frame materials: PC • Lens colour: Clear • Standard: EN166 (Resistance to foging and surface damage) • c/w full side and brow protection design

28.19. Cleaning brush with dust pin


56 Item 38 of Attachment 3: Technical Specifications- File

• 200mm blade, Double cut, taper thickness, 1 safe edge • Steel, case hardened • Handle: non-wood, high impact ergonoic rubber grip with inserts • c/w eye-hole for storage Image missing

The detailed specification of the item is modified as follows: File: flat, round and triangle (200mm) Flat

Round

Triangle

57 Item 42 of Attachment 3: Technical

Brush

For cleaning file and hot metal use

Length: 250mm overall, including handle.

The detailed specification of the item is modified as follows: Brush

Cleaning brush with dust pin


Specifications- Brush

Handle: wood.

Bristles: galvanised steel wires

4 rows of 16 tufts

58 Item 54.8 of Attachment 3: Technical Specifications- Spring Divider

Spring Divider For inserting into PVC conduits for bending purpose • 600mm overall length • To be fabricated if not available off-the-shelf • For bending Ø20mm and Ø25mm PVC conduits • Robust 2mm square section spring steel • Corrosion resistant, electroplated finish • For heavy duty applications • Complete with fastening eye

Irrelevant Image

The detailed specification of the item is modified as follows: Spring Divider

100mm

59 Item 54.26 of Attachment 3: Technical Specifications- Brush

Brush

For cleaning file and hot metal use

Length: 250mm overall, including handle.

Handle: wood or plastic.

Bristles: thick tuft, natural husk or artificial.

c/w eyehole for hanging.

The detailed specification of the item is modified as follows: Brush

Cleaning brush with dust pin


60 Item 54.27 of Attachment 3: Technical Specifications- Countersunk Bit


61 Item 54.28 of Attachment 3: Technical Specifications- Countersunk Bit


62 Item 55.6 of Attachment 3: Technical Specifications- Grease Gun


63 Throughout the document Item 57: Common Hand tools

Quantity – 2 Sets Quantity – 1 Set

64 Item 57 of Attachment 3: Technical Specifications- Common Hand tools

Common Hand Tools Each set shall consists of following items: Adjustable spanner (300mm) Open-end spanner Screwdriver, slotted Screwdriver, Philips Allen Key Set (Metrix)

The list of items is modified by excluding/adding some items and after modifications in the detailed specifications. The new list with detailed specifications of each item is as follows: Common tools Common tools include 40 nos. of each the following items:

57.1. Screwdriver, Flat

Flat (170-200mm)


Combination plier (170mm) Long nose plier (160mm) Tubing cutter


57.2. Wire stripper

For electrical wiring work use

Overall length: approx. 180mm

Cable insulation stripper with handles lockable

Spring loaded

Suitable for wire gauge AWG 22 ~10(0.5mm2 ~ 4mm2 cable)


Common Hand Tools Each set shall consists of following items: Adjustable spanner (300mm) Open-end spanner Screwdriver, slotted Screwdriver, Philips Allen Key Set (Metrix) Combination plier (170mm) Long nose plier (160mm) Tubing cutter

The list of items is modified after excluding/adding some items and after modifying changes in the detailed specifications. The new list with detailed specifications of each item is as follows: Common tools Each set shall consists of 1 no. of each of the following items:


Flat (170-200mm)



58.2. Screwdriver, Philips

Philips (200-220mm)


58.3. Spanner Adjustable (8inch)


Common Hand Tools Each set shall consists of following items: Adjustable spanner (300mm) Open-end spanner Screwdriver, slotted Screwdriver, Philips Allen Key Set (Metrix) Combination plier (170mm) Long nose plier (160mm) Tubing cutter

The list of items is modified after excluding/adding some items and by making certain changes in the detailed specifications. The new list with detailed specifications of each item is as follows: Common tools Each set shall consists of 1 no. of each of the following items:


Flat (170-200mm)


60.2. Screwdriver, Philips

Philips (200-220mm)


60.3. Spanner Adjustable (8inch)

67 Item 61 of Attachment 3:

Stop Watch - Analog type

Stop Watch -Digital


Technical Specifications- Stop Watch

68 49 Item 1.9 of Attachment 3: Technical Specifications- Electrical wiring

1. Required Tip diameter: 2mm / 4mm? 2. Required Current Rating for each cable? 3. Required Connector type: Male or female for each

cable?

1. The tip diameter should be 4mm 2. The current Rating for each cable should be 5 A 3. Male type connector is required because the Electric Liquid

Level Control Rig has the female type connector.

5

Annexure-A (Baking system and Traffic light system)

Baking System– System Functioning

6


Baking System – Pin Assignments

Arduino UNO Baking System Pin Direction

D3 Conveyor 1_1 (Motor Driver 1) Output




D7 Act (LED) Output

D8 Green Light (G LED) Output

D9 Red Light (R LED) Output

D10 Fan (LED) Output

D11 Buzzer Output

D12 Sensor 1 (Button) Input

D13 Heater (LED) Output

A0 Start Button (Button) Input

A1 Stop Button (Button) Input

A2 Sensor 2 (Button) Input




7


Baking System– Breadboard

8


Baking System– Driver

Driver and Stepper motor used

here is 28BYJ‐48

Stepper Motor with ULN2003

Driver

1


Motor1

ULN 2003Driver

Motor2

ULN 2003Driver

D3

D4

Uno D5

D6

2


Traffic Light – System Functioning

3


Traffic Light – Pin Assignments

Arduino Pin Traffic Light System Pin Direction

D2 East‐West Green Output

D3 East‐West Amber Output

D4 East‐West Red Output

D5 North‐South Red Output

D6 North‐South Amber Output

D7 North‐South Green Output

D8 West‐East Red Output

D9 West‐East Amber Output

A0 Vehicle 2 Button Input

A3 West East Right Turn Output

A4 West East Green Output

A5 Vehicle 1 Button Input

4


Traffic Light – Breadboard

5

Annexure-B (Pumping system)

Pumping system

Detailed Specifications:

The Pumping system shall consist of the following items:

I. GRP Potable Water Storage Cistern (with partition)-01 set

II. GRP Potable Water Storage Cistern (without partition)-01 set

III. Duplex Horizontal Transfer Pumpsets -05 sets

IV. Control Panels for Duplex Horizontal Transfer Pumpsets-05 sets

V. Duplex Vertical Booster Pumpsets-05 sets

VI. Control Panels for Duplex Vertical Booster Pumpsets--05 sets

VII. Duplex Vertical booster pump with variable speed drive and control panel-

01 set

The detailed specification of each item is given as below:

I GRP Potable Water Storage Cistern (with partition)

It shall comprise not less than the following as shown in the diagrams (Refer to Drawing A, B and C):

o 2mL x 1mW x 1mH (Approved) with partition o Make: FRP or equivalent o C/w: - Level indicator with drain down, isolation and overflow valve,

marking and label. - Vent - Inlet valve - Outlet valve - Ball valve - Access cover and lock - Balancing pipe and isolation valve - Inlet manifold and valves - Outlet pipe manifold and valves - Ladders - Recess for mounting level sensors

o Seat on steel channel be with padding o Concrete plinths o Drain pipes and valves

o Overflow and warning pipes

6


II GRP Potable Water Storage Cistern (without partition)

It shall comprise not less than the following as shown in the diagrams(Refer to Drawing A, B and C):

o 2mL x 1mW x 1mH (Approved) o Make: FRP or equivalent o C/w: - Level indicator with drain down, isolation and overflow valve,

marking and label. - Vent - Inlet valve - Outlet valve - Ball valve - Access cover and lock - Inlet manifold and valves - Outlet pipe manifold and valves - Ladders - Recess for mounting level sensors

o Seat on steel channel be with padding o Concrete plinths o Drain pipes and valves

o Overflow and warning pipes

III Duplex Horizontal Transfer Pumpsets

Each duplex sets to comprise of 2 pumpsets which can alternate in duty with the following requirements:

o Head: 30 m (Min) o Flow: 4 m3/hr (Min) o Horizontal type o SS impeller and casing stage o Single or multistage centrifugal o Connected to single or three phase motor. o C/w:

- Gate valves - Strainers - Check valves - Flexible joints - Pressure and compound gauges - Pipes and fittings - Manifolds

o Plinths and pump bases c/w vibration absorbers

7


IV Control Panels for Duplex Horizontal Transfer Pumpsets

Each manual-auto operating panel shall comprise of

o Minimum 400H x 300W x 300D single layer PVC box with clear perspex cover.

o Main isolator mounted on side o Control fuses c/w holders o TPN MCB main breaker o TPN RCCB o TP MCBs o Magnetic contactors c/w overloads o Relays c/w bases o Transformer indicating lights c/w with bezel and lens for ‘Run’,

‘Stop’ and ‘Trip’

o Auto-Off-Manual selector switch. o ‘Pump 1’-‘Pump 2’ duty selector switch o Start push buttons o Stop push buttons o Labeling o Terminal blocks, mounting bracket, cable holders and DIN rail. o 5 level floatless controller (Simulate ‘High side cistern’ c/w sensing

electrodes and holders mounted on side of water storage cistern o 3 level floatless controller (Simulate ‘Low side cistern’ c/w sensing

electrodes and holders mounted on side of water storage cistern

V Duplex Vertical Booster Pumpsets

Each duplex sets to comprise of 2 pumpsets which can alternate in duty with the following requirements:

o Head: 30 m (Min) o Flow: 4 m3/hr (Min) o Vertical type. o SS impeller and casing stage o Multistage centrifugal o Connected to single or three phase motor. o C/w:

- Gate valves - Strainers - Check valves - Flexible joints - Pressure switches manifold c/w gauge - Pressure and compound gauges - Pipes and fittings - Manifolds Installed with single hydro-pneumatic pressure vessel which comes with (To size according to design. Small capacity pneumatic vessel preferred): - Air nipple - Rubber diapraghm

8


- Supports and brackets o Plinths and pump bases c/w vibration absorbers

VI Control Panels for Duplex Vertical Booster Pumpsets

Each manual-auto operating panel shall comprise of:

o Minimum 400H x 300W x 300D single layer PVC box with clear

perspex cover

o Main isolator mounted on side o Control fuses c/w holders o TPN MCB main breaker o TPN RCCB o TP MCBs o Magnetic contactors c/w overloads o Relays c/w bases o Transformer indicating lights c/w with bezel and lens for ‘Run’,

‘Stop’ and ‘Trip’

o Auto-Off-Manual selector switch o Start push buttons o Stop push buttons o Labeling o Terminal blocks, mounting bracket, cable holders and DIN

rail. 3 level floatless controller (Simulate ‘Low side cistern’ c/w sensing electrodes and holders mounted on side of water storage cistern

VII Duplex Vertical booster pump with variable speed drive and control panel

o Provide additional electronic flow switch and controls to the pumping system c/w variable speed drives for the motors

o Control Panel includes relays, wiring, contactors, DIN rails etc.

Others Information:

Floor loading for T02-20 is 10kN/m2. Supplier is to ensure that the overall loading is within this limit.

9


MANHOLE COVER WITH LOCK

INLET VALVE

CAT LADDER

Drawing A

VENT

EQUILIBRIUM FLOAT VALVE

DRAIN VALVE

OUTLET VALVE

BALANCING VALVE

WATER STORAGE CISTERN

2M X 1M X 1M SUPPORTED ON I BEAMS PLUS PAD

CONCRETE PLINTH

10


SDHC SDHC SDHC SDHC

SDHC SDHC SDHC SDHC SDHC SDHC SDHC SDHC

WO

B

WO

B

WO

B

WO

B

WD

W

D

WD

W

D

WD

W

D

WD

W

D

Drawing B

11


Drawing C

12

Annexure-IV

Screenshot of the Virtual Pre-Bid Meeting

13

Annexure-IV

14

Annexure-IV

Documents

ODISHA SKILL DEVELOPMENT AUTHORITY