Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
NYS DOT APL Rev. May 27, 2020
Page 1 of 13
NYSDOT Transportation Management Equipment Approved Product List (APL) May, 2020
The various traffic signal hardware and assemblies listed below have been tested by the New York State Traffic Signal Laboratory. This hardware has been found to function with hardware specified by the New York State Transportation Management Equipment Specifications dated May 2020 (and applicable addendum) and/or the NYSDOT Standard Specifications, Construction and Materials book dated September 4, 2014 (and applicable addendum). Specifications are also available on the NYSDOT Web site. Full functional testing of complete systems has not been performed by the Signal Laboratory. It is our intention to test only the hardware that directly interfaces with our equipment, to insure that it does not adversely impact the microcomputer and cabinet system. Full functional testing, not performed at the Signal Laboratory, should be made by the user prior to any purchase.
NYS DOT Contacts: Traffic Signal Section Tel: 518-485-1890
Traffic Signal Lab Tel: 518-783-7746
This document and its revisions are posted on the NYS DOT website: www.dot.ny.gov/tmes
NYS DOT APL Rev. May 27, 2020
Page 2 of 13
PREEMPTION CONTROL HARDWARE Optically Controlled Hardware:
Optical Emitters
Item Device TOMAR Prod # GTT Prod #
1 Optical Emitter Model 3065 & 3065-R (remote lamp)
M492, M792
2 Optical Emitter - Vehicle Classification
Model 3065 & 3065-R (remote lamp)
M492
3 Optical Emitter - Vehicle Identification
Model 3065 & 3065-R (remote lamp)
M792
Optical Detectors
Item Device TOMAR Prod # GTT Prod #
1 Optical Detector 1 Channel / 1 Direction
None
M711
2 Optical Detector 1 Channel / 2 Directions
None
M721
3 Optical Detector 2 Channels / 2 Directions
None M722
Detector Cable
Item Device TOMAR Prod # GTT Prod #
1 Detector Cable M913 M138
Phase Selectors/Optical Signal Processors
Please note that either manufacturer’s emitter will work if the user programs the unit to allow all
NYS DOT APL Rev. May 27, 2020
Page 3 of 13
Classifications or identifications (“0" code)
Item Device TOMAR Prod # GTT Prod #
1
1 Channel Phase selector/Optical Signal Processor – No Vehicle ID or Classification
None None
2
2 Channel Phase selector/Optical Signal Processor – No Vehicle ID or Classification
None None
3 3 Channel Phase selector/Optical Signal Processor – No Vehicle ID or Classification
None None
4 4 Channel Phase selector/Optical Signal Processor – No Vehicle ID or Classification
None None
5
1 Channel Phase selector/Optical Signal Processor Vehicle
Classification Logging
None M762
6
2 Channel Phase selector/Optical Signal Processor Vehicle
Classification Logging
None M762
7
3 Channel Phase selector/Optical Signal Processor Vehicle
Classification Logging
None M764
8
4 Channel Phase selector/Optical Signal Processor Vehicle
Classification Logging
None M764
9
1 Channel Phase selector/Optical Signal Processor Vehicle
Identification Logging
None M762
10
2 Channel Phase selector/Optical Signal Processor Vehicle
Identification Logging
None M762
11
3 Channel Phase selector/Optical Signal Processor Vehicle
Identification Logging
None M764
12
4 Channel Phase selector/Optical Signal Processor Vehicle
Identification Logging
None M764
NYS DOT APL Rev. May 27, 2020
Page 4 of 13
SIREN CONTROLLED HARDWARE Traffic Systems LLC SONEM 2000-NY Phase Selector 179-NY Siren Detector
MICROWAVE DETECTION DEVICES – Presence Detectors
MS Sedco
TC-30 Ultrasonic Vehicle Presence Detector TCPS-170 Rack Mounted DC Isolation Card/Power Supply for MS-Sedco Detectors
TC-CK1-SBE Intersector w/TCIB Interface Card MICROWAVE DETECTION DEVICES - Non-Presence Detectors MS Sedco
TC-26B Microwave Vehicle Motion Detector TCPS-170 Rack Mounted DC Isolation Card/Power Supply for MS-Sedco Detectors
GPS TIME CLOCK
Simrex
SIMSYNC-RMC-DC-2070 GPS Timesync system – stand alone model
SPREAD SPECTRUM RADIO SYSTEM
Encom
EP5100RRS232 Encom Model 5100R Wireless Interconnect Unit, RS232 Version
EP5100RFSK TAPS Encom Model 5100R Wireless Interconnect Unit, FSK Version for
TAPS Software
EP5270Serial Radio Encom Model 5270 Wireless Interconnect Unit, RS232 Version
TSITAGI9 Yagi Directional Antenna, 9db Gain, 900 MHZ
TSILMR400﴾L﴿ Remote Antenna Cable, LMR 400 N M to N M ﴾specify length of cable needed
COMPAK 8 I/O Contact Closure I/O Radio
Simrex
DM2070-TA DataMover 2070-TA Transceiver, opto isolated
DM2070-T DataMover 2070-T Transceiver, Non-opto isolated
PT.LMR195-NM/TNCM-3 LMR 195 cable, N Male to TNC Male, 3 ft jumper
AN.LA-FIL-3-FF Multistrike lighting arrester, N female connector
PT.LMR400-NM/NM-40 LMR 400 cable, N M to N M, 40 ft
AN.YG-915-9DBD Yagi Antenna, 9 dBd, 896-970 MHz, black w/clamp, 3 Ele
DM-IO-900-S0808 Contact Closure Spread Spectrum I/O Radio
DM ESS-II-900-D DataMover ESS-II Transceiver
NYS DOT APL Rev. May 27, 2020
Page 5 of 13
CELLULAR MODEMS / ROUTERS
Red Lion / BlueTree SN-
SN-6921-VZ 4G LTE Industrial Cellular Router SN-6901-VZ 4G LTE Industrial Cellular Router
Digi International
TransPort WR44R, P/N WR 44-M800-AE1-RF, LTE Multi-Carrier, CAT6 (4G/3G), 4 Eth, RS232, Power, No Antennas
SERIAL SERVER Digi International
Digi One IAP Haz modems, P/N 70002326
BROADBAND RADIOS Encom
Model COMMPAKBB900S – Broadband IP radio
Model E-Lite 58 INT 5 GHz – Broadband radio w/ integrated antenna
PORTABLE TRAFFIC SIGNALS
Horizon Signal Technologies
Model Number SQ3TS
OMJC Signal, Inc.
PNW 234 2070 Model QPNW 234 Pop Up Quad 2070
North America Traffic
Model Number PTL 2.4X Solar Powered with Battery Backup
NYS DOT APL Rev. May 27, 2020
Page 6 of 13
John Thomas Inc Model ADDCO PTS 2000 Solar Powered with Battery Backup Software Versions: Front panel – FP3018 Controller (Galaxy Model G-16) – TC4077
NYS DOT APL Rev. May 27, 2020
Page 7 of 13
TEMPORARY WORK ZONE TRAFFIC SIGNALS Horizon Signal Technologies Model Number SQ2
ACCESSIBLE PEDESTRIAN SIGNALS (APS)
Polara Engineering
Polara Part # Description
EN43TN-XX-YY
PHCU4W
ECONFIG
EZ410
EZ510
EZ Communicator Navigator 4 Wire APS w/9 X 15 Station and Sign
XX - 0=Standard Message, 1=Custom Message
YY- B=Black, G=Green, Y-Yellow
4-Wire Ped Head Control Unit (with mtg hardware & cable assembly)
Wireless Hand Held Navigator Configurator (programming tool)
EZ Communicator (programming tool)
EZ USB Uploader (programming tool)
iN35ON0-G
iPHCU3W
Audible Ped Station, 9” x 15” size Power supply
Pelco
Pelco Part # Description
SE-2900-P36 PLS001331-Rev A
Audible Ped Station Power supply
SE-2900-P30 PLS001313 SE-174-P30 SF-1074
Audible Ped Station (Intelli-Cross model) Power supply Sign adapter Sign
Dick Campbell Co.
Dick Campbell Co Part # Description
5010801T/512T Audible Ped Station includes base station, back
plate, 9x15 sign, tamper resistant hardware and
power supply
501-0300 Replacement power supply
NYS DOT APL Rev. May 27, 2020
Page 8 of 13
ADA PIEZO PEDESTRIAN PUSHBUTTON WITH STATION
Campbell Company
Campbell Part Number Description
DCC 4 EVR-EL RND 4H Green/ MPS-915-4H
RND-Green
9” x 15” Ped ADA Station, sign not supplied
Polara Engineering
Polara Engineering Part Number
Description
BDSP-010-G/PBF 9X15-G
9"x15" Ped ADA Stations, sign not supplied
Pelco Products, Inc
Pelco Products Part # Description
SE-2132-15-P4H-P36 9” x 15” Ped ADA station, sign not supplied
ADA PIEZO PEDESTRIAN PUSHBUTTONS
Polara Engineering
Polara Part # Description
BDL3-G Bulldog ADA Ped Push Button, Latching and Momentary
BDSP-010-G Bulldog 3 without LED
PBCU Interface device for Push Buttons Control Unit with Mounting hardware PBCUHK , and Cable assembly 850-246
Campbell Company
Campbell Part # Description
DCC 4 EVR RND-EU-4H-GREEN
Campbell part number 502-0012 Standard Ped ADA Button – no LED present
DCC 4 EVR EL RND 4H - GREEN
Campbell part number 502-0002 Standard Ped ADA Button – with LED. Can be changed to latching type by using PBIC
PBIC Push Button Interface Card, P/N 501-0005
PBI-L (ENIM) Latching pushbutton interface (Ped head mounted), P/N 501-0010
NYS DOT APL Rev. May 27, 2020
Page 9 of 13
5030101 3” Low Profile Std Round Housing
Pelco Products, Inc
Pelco Products Part # Description
SE-2178-P36 3” round Piezo ped pushbutton, 4 hole mounting, no LED
AUXILIARY INPUT CABINETS Traffic Systems Inc.
MFG Part # 1-050-000758 Model #: TCSM261517A1253R
NYSDOT Model # 311X (NYSDOT Auxiliary Input Cabinet)
NETWORK CAMERA
Axis Communication AB Model # P5624-E MK II (requires PoE injector model #T8123-E) Part # 0932-001 PoE Injector #T8123-E Part # 5030-234 Axis model T91L61 Wall and Pole Mount Bracket (P/N 5801-721) MioVision Technologies SmartView 360 Image detection camera SmartSense Image detection processor SmartLink Cell modem communication
FIBER OPTIC MODEM GDI Communications LLC
Model 2070-6D – P/N FDM2070-6D-x-x-x
ETHERNET SWITCHES
Actelis
Model MI684D
Model ML680DF
NYS DOT APL Rev. May 27, 2020
Page 10 of 13
EtherWAN
Model ED 3501 Industrial 10/100 BASE-TX Ethernet Extender over copper pair
NYS DOT APL Rev. May 27, 2020
Page 11 of 13
WIRELESS VEHICLE DETECTION SYSTEM Sensys Network
CC170 Master Card for Type 170, Type 2070 Model Or NEMA TS1 Controllers
CC-ACC Access Box for Contact Closure Master Card
EX-170 Extension Card for Type 170, Type 2070 or NEMA TS1 Controllers
VSN240-EPX Epoxy Tube for Installation of VSN240
APCC-SPP APCC Digital Radio P/N: 900-240-030-010 APCC-MP-EG APCC P/N: 900-240-030-012 EX card Extension card, P/N 600-240-031-0-000 APCC-ACC-1 Isolator RP240-BH-LL Long Life Repeater, P/N 900-240-020-004 KIT-MTG-EXT Mounting Kit APCC-M APCC with Ethernet APCC-M-E APCC with enhanced Ethernet VSN240-F-GR Deep Grind wireless sensor for all freeway, arterial, and signal control Applications. VSN240-T-GR Deep Grind wireless sensor for signal control applications only VSN240-F-2 Flush mount Wireless Sensor for all freeway, arterial, and signal control applications VSN240-T-2 Flush mount Wireless Sensor for signal control applications only
Trafficware 50311-2000 Rack Mount Base Station (RMBS) Card 5400-0003 RMBS Omni Antenna to mount on top of cabinet 8005-0304 RMBS Omni Antenna extension cable RPTNC to RPSMA RF Cable 50286-2000 Pod Power Panel (Optional) 50312-2000 RMBS Expansion Card (Single Wide) (TBD Per Intersection) 11106-2000 Expansion Card EIA-485 Cable, 1 ft. (Per Expansion Card) 50284-2003 Access Point, (3) Radios 50284-5000 Interface Connector Kit for Access Point 5400-0001 Omni Directional Antenna, 900 MHz 5400-0002 Large Directional Panel Antenna, 900 MHz 9000-0352 Lightning Suppression for Antenna 8005-0302 RF Cable, RG142, RPTNC to Type N Male, 12ft. 50285-2000 Pod Sensor (w/ Installation Housing) 50285-5002 Pod Sensor Installation Housing 3A414-0000 Nylon Plug, Deep Burial, 1 in. 3A415-0000 Nylon Plug, Deep Burial, 2 in. 3A419-0000 Nylon Plug, Deep Burial, 3 in. 3A420-0000 Nylon Plug, Deep Burial, 4 in. 3A421-0000 Spacer for Nylon Plug, Deep Burial (all sizes) 9000-2000 Epoxy Joint Sealant Black
NYS DOT APL Rev. May 27, 2020
Page 12 of 13
PROGRAMMABLE SIGNAL HEAD McCain Inc
M34772 3 Section, Green without Visors
RRFB (RECTANGULAR RAPID FLASH BEACON)
Tapco Model : RRFB-XL (P/N: RRFBXL2-NA1) P/N V-53671-1703 (SLAVE UNIT) TAPCO SOLAR POWERED RRFB P/N V-53671-1701 (MASTER UNIT) P/N V-53671-1702 (SLAVE UNIT) CARMANAH TRAFFIC SOLAR POWERED RRFB MODEL #R920E SOLAR BASE #SC315G – AC POWER OR SOLAR POWER LIGHT BAR #87668 AP BUTTON - MODEL# XAV2E - LED
MODEL 244 FOUR CHANNEL ISOLATOR
GDI Model : DIM244F
FLAT METAL SIGNS
CORCRAFT Sign Type : NO TURN ON RED Size: 24” x 30”
LED BLANKOUT SIGNS
M – SYSTEMS INC
Model Number: R10-11 Sign Type: NO TURN ON RED
TRAFFIC SIGNS INC
NYS DOT APL Rev. May 27, 2020
Page 13 of 13
Model Number: 2430-5LED-BO-NTOR Sign Type: NO TURN ON RED
ORANGE TRAFFIC Model Number: LLSR10-11 Sign Type: NO TURN ON RED
MARINE NAVIGATION AND BRIDGE LIGHTS
Sealite AC Powered Navigation Light Part Number: SL-BR-G-360-AC (bridge lantern, Green LED)
Sealite DC Powered Navigation Light Part Number: SL-BR-G-360-DC (bridge lantern, Green LED)
Manufacturer Requirements and Notes
1) The effective period of this APL is indeterminate. However, manufacturers are required to notify the Traffic Signal Coordinator, of any proposed changes affecting design or performance in the product that has been approved. THIS INCLUDES ALL COMPONENTS LISTED IN MANUALS AND ALL ENGINEERING CHANGES.
2) A manufacturer's listing on the APL does not waive any of the requirements of the specifications or relieve the manufacturer of any obligation there under. Defective work, materials and equipment will be rejected. In short, all equipment submitted must comply with current specifications.
3) Each will be required to submit their Quality Assurance Procedures for each item that they have listed on the APL for review and approval. These procedures will be requested in writing for all new items added to the APL and periodically, at the request of NYSDOT, for existing APL items. Failure to submit these Quality Assurance Procedures or failure of these procedures to be approved by NYSDOT will result in the removal of the item from the APL.
4) Each manufacturer is responsible for re-submitting, to NYSDOT, the Quality Assurance Procedures for their products in this APL when ever they are revised. Failure to submit these Quality Assurance Procedures or failure of these procedures to be approved by NYSDOT will result in the removal of the item from the APL.
5) Failure of a manufacturer to perform satisfactorily on purchase orders by failing to meet delivery schedules or maintain a high rate of acceptance as depicted in the specification will result in the item being removed from the APL.
6) NYSDOT has instituted the practice of updating this QPL/APL document on an as needed basis. Manufacturers should always check the NYSDOT website for the latest QPL/APL Listing. To navigate on our website, the following procedure should be used:
a. Go to the NYSDOT website at www.dot.ny.gov/tmes
b. On this web page you can choose the item
NYS DOT APL Rev. May 27, 2020
Page 14 of 14
NYSDOT Transportation Management Equipment – Approved Products List (APL) to get the latest version of the APL document.
Please contact the Traffic Signal Laboratory if you have any questions or comments.
New York State Department of Transportation (518) 783-7746 (Phone) Traffic Signal Laboratory (518) 783-7828 (Fax) 16 Avis Drive Latham, NY 12110