MML COMMAND

1- ZEEI: BCF=<BCF NO> ;:- Tells about no. of calls in each sector at that time 2- ZEEL: BL;- Give information about the no . of blocked TRX in particular BCS

3- ZEOL :< BCF no>; :- Give information about present alarms

4- ZEOH:YYYY-MM-DD:HH-MM-SS:BCF=<BCF NO>; :-This command tells about history of alarms on particular date from particular time

5- ZAHO:ET:;- To check alarms on the ETs.

6- ZYMO:ET=<ET No.>; - To check ET link status have any errors or not, also to check the slips on ET.

7- ZDTI:::PCM=<ET No.>; - To interrogate about Lap D signal on particular ET./ To Know on which BCF is this particular ET 8- ZUSI :TCSM ; : To check the status of transcoders

9- ZRBI:ALL; -- SEMIPERMANENT BROADBAND CONNECTIONS HANDLING

10- ZACC< alarm no>; :--To delete a particular alarm

11- ZFWO:BCSU=0&&6:BTS:; - To check all the GB links in the particular BSC.

12- ZERS:BTS=<No.>,TRX=<No.>:L or U:; - To lock and unlock TRX.

13- ZAHO:TCSM:;- To check the alarms on the transcoders.

14- ZAHO::; - To check the alarms on the BSC.

15- ZESI:; - To check EDAP GPRS mapping.

16- ZEOL:<BCF No.>:; - To check the current alarms on the site.

17- ZDSB:::PCM=<ET No.>; - To check all the parameters of LAPDs.

18- ZWIP:GSW:<ET No.>; - To check the ET, is in which interface.

19- ZYEF:ET=<ET No.>; - To check whether loop on ET is getting or not.

20- ZEQS:BTS=<BTS No.>:L or U; - To lock or unlock BTS.

22- ZEFS:BCF=<BCF No.>:L or U; - To lock or unlock BCF.

23- ZERM:BTS=NO,TRX=NO:PREF=N&P;:TO PREFERAD BCCH ON TRX

24- ZESI:ID=ET NO.;TO CHECK E-DAP OF PARTICULAR BTS

25- ZEEI::BCSU; Check cop. Of trx

26- ZUSU:ET,ET NO:C=TOT:FCD;: ET RESTART

27- ZUSU:ET=<ET No.>:; - For resetting ET port. 2 ETs take reset at same time.

28- ZYEC:ET=<ET No.>:NORM,CRC4,OFF; - To change ET mode to CRC4 or DBLF.29- ZYEI:ET=<ET No.>; - To interrogate about the ET mode.

30- ZUSI:ET:; - To check ET state whether it is blocked or working.

30- ZDTF:TCSM,:; To check ET state whether it is blocked or working.

31- ZUSC:ET=<ET No.> - To change the state of ET to BL, WO, SE.

32- ZERO:BCF=<BCF No.>; - To see the all parameters of the BCF.

33- ZEFR:<BCF No.>:SITE or OMU:; - To give reset to whole site or to the OMU of the site.34- ZRCI:SEA=3:CGR=1:PRINT=5:; - To check the status of circuits of the transcoders and also to see the kick no..35- ZECP – To see the list of the CBCs already created.

36- ZECE – To deactivate the message attached to the BTS

37- ZECD – To remove the message from the list.

38- ZECB:50:<BTS No.>:4:1:ENG:4::P1=<MESSAGE>; - To create the new message.

39- ZECS – To attach the message with the particular BTS.

40- ZDTC:<LAPD Name>:<STATE>; - To change the state of the LAPDs.

41-ZDTC:LAPD NO:AD; FIRST TRX SINGLING DELETED

42- ZDSD: <LAPD Name>:; - To delete the LAPD.

43-DERD:BTS=N0,TRX=NO; TRX DELETED first trx delited

44- ZUSI:COMP; Checking the working states of the BSC units

45- ZUSI:MB; checking the working states of the BSC units

46- ZUSI:CLS; checking the working states of the BSC units

47- ZUSI:TCSM; checking the working states of the BSC units

48- ZUSI:ET; checking the working states of the BSC units

49- ZUSI:OMU; checking the working states of the BSC units

50- ZNLI;-SIGNALLING LINK STATE CHANGE

51- ZNLC:<LINK No.>,ACT;

52- ZCEL:CGR=1; - Check the route circuit state.

53- ZEEL:BL; - check the block TRX of whole PLMN.

54- ZEEI::BCSU; NUMBER OF CREATED TRXS, LINKS AND REAL TCHS UNDER BCSUS55- ZQNI;: CHEK C.NO. IN BSC

56- ZQCI; :CHECK BSC X.25 LOCATION

57- ZNLI; :CHECK SINGALLING STAUTS

58- ZOLT;: CHECK SINGALLING LINK LOAD

59- ZQLI;: CHECK INTERROGATING LINKAGE DATA FOR X.25(OMU)

60- ZQSI;: INTERROGATING PHYSICAL CHANNEL STATE X.25(OMU)

61- ZAHO::NR=2725&2992&2993&2952&2955; CHECK BSC ALARM HISTORY

62- ZAHO::NR=2241&2950&2915&2477&2478&3265&2720; CHECK BSC ALARM HISTORY63- ZAHO:TCSM;TRONSCODER ALARM

64- ZWQO:CR; CHECK BSC BACKUP

65- ZEOL::NR=7706; OMU LINK DOWN

66- ZEOL::NR=7767; SITE DOWN

67- ZQRI;: BSC CHECK IP. ADDRESS.

68- ZEQO:BTS=23:GPRS;:TO CHECK GPRS ENABLE OR DISABLE

69- ZWAT;:BSC CREATED ALARM

70- ZAHP::NR=4000:2009-2-6,20-00-00:;HISTORY ALARM OF BSC

71- ZAHP::NR=ALARM NO.;ON DAY ALARM HISTROY.

72- ZWTI:U:TCSM;TRANSCODER LOCATION DATA BASE

73- ZAHO:TCSM; TRANSCODER ALARM HISTORY

74- ZNEL; TRANSCODER LINK HISTORY

75- ZWAT; Created bsc allarm

76- ZEQV:BTS=30:GENA=Y;GPRS BTS IN ENEBEL.

77- ZWUP:286; CHECK PCM STAUTES (ET TRAU & SITES)

78- ZDRI;

79- ZFWO:BCSU=0&&6::; PRIMARY RATE ACCESS D-CHANNEL STATE MANAGEMENT COMMAND80- ZAHO::NR=2632; CHECK LOADING PROGRAM VERSION

81- ZDSE:trxsig:BSCU,x:0,x:16,xx-xx,xx; Create TRXSIG

82- ZDSE:<link_name>:BCSU,<index>:<sapi>,<tei>:<rate>,<t1_tsl>,<sub_tsl>; Create TRXSIG83- ZQUS: Talks to FXC card Remote Loging Session

84- ZUBS:BTS=bts,TRX=trx; TRX Run testings

85- ZEQO:ALL; BTS Identification Parameters

86-ZEOL::NR=8268; LICENCE WILL EXPIRE IN THE NEAR FUTURE  LICENCE FOR FEATURE IS NOT AVAILABLE