November HOTdeals

Prices Effective ThroughDecember 31, 2010

NAMEbrandsGREATquality

FASTserviceHOTprices

page 34

®

Call 1-800-USE-ENCO(1-800-873-3626)

Order On-line! www.use-enco.com

SAVE 15% OFF ALL ORDERS OF $199*SAVE 15% OFF ALL ORDERS OF $199*

Starting At

$2,599 95Starting At

$2,599 95Drill BitSharpeners

BONUS

Diamond Wheel

& Carry Bag

($70 Value)

with Purchase of

500X & 750X!page 25

Twin Pack 41⁄2"Small Angle Grinders

$99OnlyModel# TJ893-2171

$99page 2

148 Pc. Professional Tool Set

$7495Sale PriceModel# TJ308-0065

$7495page 70

Bi-Metal HoleSaw Kits

$2995Starting At

$2995

page 51

CenteringIndicator


$70 page 7

13″x 40″ Geared HeadGap Bed Bench Lathes

see page 9 for details

*see page 2for details

01-72 EH 10-11_Layout 1 10/15/10 10:00 AM Page 2

http://www.use-enco.com/CGI/INPDF?PMAKA=TJ607-4907&PMCTLG=03



http://www.use-enco.com/CGI/INPDF?PMPAGE=2&PMCTLG=01







http://www.use-enco.com

2 PHONE : 800-USE-ENCO (800-873-3626)PHONE : 800-USE-ENCO (800-873-3626)

QUICK INDEXQUICK INDEXAbrasives................................42-45

Cutting Tools ..........................46-59

Fluids ......................................40-41

Hand & Power Tools ..............68-71

Machine Tool Accessories ......16-28

Machinery................................30-39

Material Handling & Storage......65-67

Measuring Tools ......................4-15

Raw Materials ........................60-61

Shop Supplies ........................62-64

Books & Reference ......................29

If you find a lower advertised priceon any item we sell, just send us acopy of the ad and Enco will meet itand beat it by 5%!*

*Some limitations apply.Please call for details.

WE WILL BEAT ANYADVERTISED PRICE!

Satisfaction Guaranteed!We want you to be satisfied with your purchase!Enco products are guaranteed to be free of allmanufacturing defects for a period of 30 daysfrom the date your order is shipped. Machineryitems carry warranties for extended periods;please call for details.

EASY ORDERINGPHONE: 800-USE-ENCO (800-873-3626)

• Mon.-Fri., 8 AM-8 PM ET • Sat., 8 AM-5 PM ET

ONLINE: use-enco.com

FAX: 800-965-5857 24 hrs.—orders & quotes800-283-9614 Machinery parts & inquiries

Terms of Sale..................................9

Reg. SaleColor Model # Price PriceBlack TJ505-4190 $13.46 $10.95Yellow TJ888-3002 13.46 10.95

Mitylite™ SubmersibleFlashlights

400% Brighter Than Ordinary Pocket Lights•Unbreakable and

waterproof ABS plastic housings • High-impact resin •Submersible up to 500'•Shines up to 4 times brighter than typical

pocket lights • Includes shirt clip and 2 AAA batteries • Compliance: UL (Class I, Div. 1), CE(EX), CSA, AUS

Planer & Shaper Gage61⁄4" Maximum Range•Set shaper and planer

tools fast and easy•Use with a dial indicator

and level large platesfor planing

SAVE36%


$5995Reg. Price$93.98

Magna-LiteButane Torch•Piezo electronic ignition system•Adjustable flame height•Nozzle cover prevents accidental ignition•Maximum temperature: 2400°F•0.5 oz. fuel capacity•25 minutes operating time•Includes LED worklight

and keychainMfr's # ML100


$849Reg. Price$11.91

SAVE28%

Metal gear case dissipates heat forlonger bearing, gear, and motor life. •Sealed switch •Ball and roller bearings•Sliding switch •Adjustable guard •5⁄8"-11 spindle •9 amps • 11,000 rpmMfr's # DW818-2

Twin Pack 41⁄2" SmallAngle Grinders

$99Twin Pack OnlyModel# TJ893-2171

$99 If PurchasedSeparately$178.00

SAVE$79

Thank you for ordering from Enco this holiday season.Our gift to you—Take 15% off your next Enco order of

$199 or more! Use promo code NHEPR.

HURRY! Offer ends November 30, 2010!By phone—give promo code NHEPR to your friendly Enco Sales Associate. Online—enter promo code NHEPR

on the shopping cart page and click apply. Minimum order requirement can be met by purchasing $199 of products offered in any current Enco catalog or at use-enco.com. Minimum order requirement excludes taxes

and shipping charges. Customer must present promo code at time of order.

Orders placed separately may NOT be combined to satisfy minimum purchase requirement. This offer cannot be combined with other promotional offers or orders previously placed with Enco. All orders must be received

by Enco no later than 11:59 PM EST November 30, 2010. Terms and conditions are subject to change without notice. Enco dealers are specifically excluded from this 15% promotional offer.

HURRY! Offer ends November 30, 2010!

HAPPY HOLIDAYS!

HAPPY HOLIDAYS!

SAVE18%

02-03 EH 10-11 index_Layout 1 10/15/10 10:01 AM Page 1

















http://WWW.USE-ENCO.COM


http://use-enco.com

3Internet : use-enco.com FAX : 800-965-5857Internet : use-enco.com FAX : 800-965-5857

UL

•Industry specific solutions built-in•11 digits (7 normal, 4 fractions) w/full annunciatorsMeasure Master Pro™•30 functions •Ideal for faster, more accurate material estimates •Quickly find solutions to building and dimensional problems•Work in and convert between feet-inch-fractions;

decimal-feet-inch-fractions, yards, meters, centimeters and millimeters, as well as areas and volumes

•Display size: 0.625 x 2.5" • Uses (2) LR-44 long-life batteriesUltra Measure Master®

•Provides more than 400 conversion combos utilizing 60 built-in standard and metric units

•Easily calculate linear, area and volume measurements•Find dry and liquid weights per volume, solve for velocity,

flow rate, pressure and temperature•Work in and convert between feet-inch-fractions,

centimeters, millimeters and meters; PSI, GPM and more

• Display size: 0.73 x 2.56" •Uses (2) single 3-volt lithium battery (CR-2016)

Professional Industrial Calculators

Ultra Measure Master®

Reg. SaleDescription Model # Price PriceMeasure Master Pro TJ328-0009 $39.99 $34.95Ultra Measure Master TJ328-0010 49.99 44.95

SAVEUP TO

12%

$3495As Low As

$3495

Replacement Blades

Hobby Knives & BladesWith Safety Caps

5 Pack Reg. Sale 100 Pack Reg. SaleDescription Model # Price Price Model # Price PriceNo. 11 TJ891-5475 $1.35 $.99 TJ505-0373 $16.97 $9.99No. 19 TJ891-5479 1.60 1.19 TJ240-1501 24.89 14.89No. 24 TJ891-5481 1.54 1.09 TJ505-0375 24.98 14.99

No. 1 Precision-Duty Knife•Aluminum handle 47⁄8" long

with No. 11 blade No. 2 Medium-Duty Knife •Aluminum handle 5" long with No. 24 blade and safety capNo. 5 Heavy-Duty Knife•Plastic handle•41⁄4" long with No. 19 bladeReplacement BladesNo. 11—Extremely sharp point for fine angle cutting and strippingNo. 19—Ideal for deburring, chiseling and rough shaping—extra long cutting edgeNo. 24—Close corner cuts for templates,mats, deburring, trimming, stripping and gasket cutting—extra long blades

Reg. SaleDescription Model # Price PriceNo. 1 Precision-Duty Knife TJ505-0371 $2.25 $1.69No. 2 Medium-Duty Knife TJ891-5472 3.64 2.69No. 5 Heavy-Duty Knife TJ891-5473 4.62 3.39

$169As Low As

$169

38" MagneticRetriever•For use in hard-to-reach areas•Angle head allows easy access under

machinery•Comfortable plastic grip•Permanent magnet•Non-corrective

construction•Max. pull: 47.5 lbs.


$1275Reg. Price$25.49

SAVE50%

10 Pc. Screw Extractor & CobaltDrill Bit Combo PackLeft Hand

Includes:5 spiral flute screw extractors, sizes 1 thru5 with correspondingcobalt drill bits.


$2595Mfr's List$48.78

TURBOMAX® Titanium HSS FractionalJobber Length Drill Bits •Sizes: 1⁄16, 3⁄32, 1⁄8, 3⁄16, 7⁄32, 1⁄4, 3⁄8"UNIBIT HSS Fractional Step Drills•Sizes: #1—1⁄8-1⁄2" (1⁄32" steps), #4—3⁄16-7⁄8" (1⁄16" steps)

9 Pc. UNIBIT &TURBOMAX® Set


$35 Mfr’s List$77.06

Soldering Mini Iron Kit11 Watt Battery Powered

•Perfect for field service repair on small parts and components

•Heats up to working temperature in under 15 seconds

•Working temperature range: 850 to 950°F•Hi-Low power switch •Wattage range: 8-11 • Tip diameter: 3⁄16"Includes: Iron, 2 tips, 4 AA batteries, lead-free solder, and tip wrench.Mfr's No. BP860MP


$1595Reg. Price$22.79

SAVE30%

SAVEOVER

50%

SAVEUP TO

26%On Knives

02-03 EH 10-11 index_Layout 1 10/15/10 10:01 AM Page 2

















6" ElectronicCaliper

•An economical electroniccaliper for general use

•±.001" accuracy •.0005" resolution•Without output•Thumb roll•Large LCD

SAVE43%

Calipers

4

Easy, Secure ShoppingDial Calipers

SAVEUP TO

50%

•Scale surface satin-chrome finishedwith clear, crisp graduations

•Main scale is hardened andground

•4-way measurement and covered rack

•Measuring faces are ground, hardened and lapped

• Lock for repetitive settings •Convenient thumb roll makes

measuring quick and easy •.001" dial grads. • Metric: .02mm grad. • Carrying case

$1495As Low As

$1495

Meas. Range Face SaleRange Per Rev. Color Model # Price0-4" .100" White TJ610-5077* $14.950-4 .100 Black TJ610-5030* 14.950-4 .200 White TJ610-5023†,†† 14.950-6 .100 White TJ610-5026 15.950-6 .100 Black TJ610-5027 15.950-8 .100 White TJ610-5028 24.950-12 .100 White TJ610-5032 35.950-12 .100 Black TJ610-5033 35.950-150mm 2mm White TJ610-5025 19.95

*Has thumb rest †Balanced dial 0-100-0††3-way meas.: inside, outside & depth

Dial Calipers•Sharp, clear dial

graduations•Knife-edge contacts • Adjustable bezel•Hardened

stainless steel•.001"

graduations

SAVEUP TO

19%

Measuring Reg. SaleRange Mfr's # Model # Price Price0-4" 68814 TJ319-3727 $90.98 $79.950-6 66964 TJ319-3730 127.98 109.950-8 66979 TJ319-3728 180.98 145.950-12 66980 TJ319-3729 262.98 229.95

$7995As Low As

$7995

6" Electronic Caliper• Hardened stainless steel throughout for

longer life and corrosion resistance• Large switchable inch/metric

.001"/.1mm LCD• Floating zero allows quick comparison readings • OD, ID and depth rod measurements • Two-year average battery life • ±.005" (±.02mm) accuracy • Without SPC output; with depth barMfr's # 700-113-10

SAVE17%

•Built tough for real shop conditions•Large-easy-to-read LCD•.0005" resolution

Shop-Hardened 6" Electronic Caliper


$5995Mfr's List$70.98

SAVE15%


$8595Mfr's List$104.00

$9289As Low As

$9289

Digimatic CalipersWith "Set & Forget" Technology•.0005"/.01mm resolution •Allows direct measurements from

power on • Large LCD for easyreading • Includes carrying case and battery with 2-year life

SAVEUP TO

32%

Meas. SPC Mfr's SaleRange Output Mfr's # Model # List Price0-4" No 500-195-20 TJ610-0038 $132.00 $92.890-4 Yes 500-170-20 TJ610-0070 157.00 138.000-6 No 500-196-20 TJ610-0045 145.00 98.000-6 Yes 500-171-20 TJ610-5035 168.00 138.000-8 No 500-197-20 TJ610-0049 205.00 148.000-8 Yes 500-172-20 TJ610-5037 220.00 178.000-12 No 500-193 TJ610-0042 402.00 295.950-12 Yes 500-173-20 TJ890-9332 469.00 362.000-18 Yes 500-505-10 TJ610-5043 731.00 619.00MyCal Battery CoverCell/Off Center 09GAA185 TJ422-3337 1.25 1.08Silver Oxide Replacement Battery 357/303 TJ712-0185 — 1.33


$1995Reg. Price$34.98

•±.001" accuracy•Metal caseMfr's # 12-527-8

“E-Z VUE” Dial Caliper& 1" Indicator Sets

•Grad.: .001" •Dial.: .100"Both caliper andindicator have blackfaces with whitemarkings andorange needles forE-Z reading.

Each Dial Caliper Comeswith a 1" Indicator!

Caliper Reg. SaleRange Model # Price Price0-4" TJ610-5060 $40.98 $29.950-6 TJ610-5062 33.98 25.490-8 TJ610-5064 51.98 38.99

$2549Starting At

$2549

SAVE25%

•Dual reading dial: Outside inch (black); Inside metric (red)

•.100"/2mm range per revolution•.001"/.02mm grad. •Hardened

stainless steel •Complete with

fitted case

Inch/Metric DualDial Calipers

$2595As Low As

$2595

Measuring Reg. SaleRange Model # Price PriceImport6"/150mm TJ619-3159 $35.98 $25.958/200 TJ990-0020 53.98 39.9512/300 TJ990-0021 71.98 49.95SPI12/300 TJ328-0881 104.98 79.95

Import

04-05 EH 10-11 Calipers_Layout 1 10/15/10 10:01 AM Page 1



































Online at use-enco.com

5For accuracy, always use the entire Enco model #from this catalog when ordering by phone or online.

Calipers

Dial Calipers•Continuous dial reading 0-100 • .001" grad.•Adjustable bezel with locking device•Covered rack keeps gear teeth clean•4-way measurements: Inside, outside, depth and step•Hardened stainless throughout with satin-chrome finish•Extra-rigid main beam • Extra-large 1.45" white dial face•Easy zero adjustment per revolution •Supplied in fitted case • Certificate of calibration

traceable to NIST included

Measuring Jaw Mfr's SaleRange Length Model # List Price0-6" 19⁄16" TJ326-1144* $48.98 $34.950-8 115⁄16 TJ326-1147 73.98 59.950-12 21⁄2 TJ326-1149 97.98 74.95

$3495As Low As

$3495

SAVEUP TO

28%

Dial Calipers•Satin-chrome

finish•Stainless

steel construction

•4-way measurement

•Thumb roll for rapid setting •.100" per rev. • .001" grad.•360° rotating bezel •.001" accuracy • Includes casePremium•Shockproof design •Silky smooth movement Heavy-Duty•Cross jaws for direct

internal measurement

Meas. Face Mfr's SaleRange Color Model # List PriceEconomy0-6" Black TJ890-9374 $75.50 $28.950-6 White TJ890-9373 75.50 28.950-8 White TJ240-0010 130.00 57.950-12 White TJ240-0011 182.00 72.950-24 Black TJ890-9953* 252.00 179.95Premium0-6 White TJ307-0137 62.95 41.990-6 Black TJ325-8094 62.95 41.950-8 White TJ325-8097 78.95 62.950-12 White TJ890-9855 104.50 75.49Heavy-Duty (Long Jaw)0-12 White TJ307-1806 166.50 109.49

$2895Starting At

$2895

SAVEUP TO

61%

•Direct inch/metric conversion •Absolute/incremental

measurements •.0005" resolution •Stainless steel frame •Includes case

$6295As Low As

$6295

SAVEUP TO

34%Meas. Mfr's SaleRange Model # List Price0-4" TJ307-3217 $84.00 $62.950-6 TJ890-9821 98.00 65.950-12 TJ307-2929 150.00 98.95Long Jaw (RS232C direct output)0-12 TJ307-3372 173.00 145.950-24 TJ890-9822 252.00 199.95

*w/Carbide OD jaws †Extra-smooth movement††Sliding surface is not TiN coated

Range/ Face Mfr's SaleRev. Color Mfr's # Model # List Price0-4".200" White 505-716 TJ307-3608 $90.10 $68.950-6".200 White 505-717 TJ307-3609 105.00 72.95.100 White 505-675 TJ307-3602 115.00 78.95.100 White 505-712 TJ307-3606* 184.00 135.95.100 White 505-689 TJ610-5056† 137.00 105.95.100 Blue 505-675-51 TJ307-3603 115.00 84.95.100 Purple 505-675-52 TJ307-3681 115.00 84.95.100 Green 505-675-53 TJ307-3682 115.00 84.95.100 Red 505-675-54 TJ307-3683 115.00 84.95.100 Orange 505-675-55 TJ307-3686 115.00 84.95.100 Black 505-675-56 TJ307-3688 115.00 84.950-8".200 White 505-719 TJ307-3610 156.00 105.95.100 White 505-676 TJ307-3605 168.00 115.950-12".200 White 505-720 TJ307-3611†† 234.00 169.95.100 White 505-677 TJ307-3607†† 250.00 189.95

Shockproof 6" Dial Caliper &Depth Attachment CombosIncludes Wooden CaseShockproof Dial Caliper:•Tough shockproof design • 4-way measuring•Solid stainless steel construction • Silky-smooth movement throughout •.100" range per revolution • .001" reading dial faceDepth Attachment:•Attaches quickly • Positive locking screw• Precision-ground contact surface

$6195Your Choice

$6195Mfr's List$94.50

FaceColor Model #Black TJ308-0032White TJ308-0031

Dial Calipers•Extra-large dial face for ease

of reading•Inside, outside, depth and

step measurements•Hardened stainless throughout•Extra-rigid main beam (.132" thick)•.001" graduation•Jaw length: 19⁄16"

(21⁄2" for 12")•Supplied in fitted

carrying case

$6895As Low As

$6895

SAVEUP TO

32%

Electronic Calipers

SAVEOVER

30%

*Black face

TJ307-3217*Extended jaws, 3-way measurement

Long RangeDial CalipersWith Extended Jaws• .100" range per revolution• .001" graduation• Certificate of calibration

traceable to NIST included• 3-way reading: inside,

outside & depth• Easy zero adjustment per revolution• Stainless steel construction• Covered rack • Satin-chrome finish • Case included

Meas. Mfr's SaleRange Model # List Price0-18" TJ328-0876 $199.98 $138.950-24 TJ328-0877 239.98 168.95

$13895As Low As

$13895

SAVEUP TO

30%

04-05 EH 10-11 Calipers_Layout 1 10/15/10 10:01 AM Page 2








































Indicators

6

It's IN STOCK and 24 Pc. Dial Indicator Set


$1795Reg. Price$26.98

With Tiny Titan Magnetic Base,Indicator & Point Set Indicator•1" travel • Black face with orange

hand and white markings•Continuous dial reads 0-100 •Revolution counterPoint Set•22 popular assorted points in

handy storage case

Magnetic Base•Powerful magnetic pull•Six mounting locators for

indicators and accessories•Three 1⁄4"-20 tapped holes• V-shaped mounting hole•10-32 tapped hole•3⁄8" mounting•4" x 1" x 1"

SAVE33%

Chrome FlexMag® Base & 1" Indicator Set

Flex Arm Magnetic Base features:•Corrosion-resistant, chrome-plated flex arm•85 lb. pull magnet•Holds rigidly in almost any position•V-base for mounting on rounded surfacesAGD Indicator features:•AGD Group 2 • .001" reading•.100" continuous reading•21⁄4" dial diameter •Carbide-tipped pointMfr's # 52-585-500

Dial Indicators & Point Sets

•Hard satin-chrome finish •Easy-to-read

rev. counters •Dial reads: 0-100 •Graduations: .001"

Indicator Indicator andMeas. AGD Only Reg. Sale 22 Pc. Pt. Set Reg. SaleRange Group Model # Price Price Model # Price PriceBlack Face1" 2 TJ605-4080 $17.29 $7.99 TJ605-4081 $15.18 $11.59White Face1 2 TJ605-4070 12.41 7.99 TJ605-4076 13.15 11.592 2 TJ605-4205 32.98 16.99 TJ605-4208 26.98 20.59.250 1 — TJ605-4011 14.87 13.59.250 2 — TJ307-3378 19.87 11.59

SAVEUP TO

54%

Dial Mfr's SaleDia. Model # List Price1" TJ890-9841 $99.95 $45.951.5 TJ307-3434 104.50 54.95

.030" Dial Test Indicators•Graduations: .0005" • 0-15-0 reading • Jeweled movement • Bi-directional constant clockwise rotation•Automatic reversal • 3 dovetail mountings•2 dovetail extensions • Includes molded case

$4595As Low As

$4595

SAVEUP TO

54%

Reg. SaleDescription Model # Price PriceIndicator Only TJ606-4720 $38.98 $32.95Set TJ606-4721 88.98 69.95

Universal Test Indicator & SetBack Plunger Type

Accessories: “G” clamp, deep hole swivel adapter with 3⁄8" clamping hole, toolpost holder 3⁄8" x 3⁄4" x 6", universal clamp 5⁄16" dia. x 51⁄2" long, spherical anvil 4-48 thread, fitted wood case.•.001" graduations •.001-.100" range • Reads 0-100

$6995Set Only

$6995

Universal Mag Base &Test Indicator SetVirtually Unlimited PositioningFeaturing: •Mag base with extension arm•Test indicator w/accessories • Universal

shank attachment • Shop-hardened caseMag Base: •2 universal ball sockets •Microfine adjustment screw•39⁄16" extension arm • Dovetail mountingTest Indicator: • .030" range •0-15-0 reading•Jeweled

movement •.0005" grad. • Auto-reversing •.080"

diameter point


$7395Reg. Price$124.98

SAVE40%

A.G.D. Group 2Movement Dial Indicators•Easy to read•Revolution counters•Vertical lug back

Measuring Dial Reg. SaleRange Grad. Reading Model # Price Price.500" .001" 0-100 TJ605-4074 $30.98 $22.95.500 .0005 0-50 TJ605-4060 36.98 25.95.500 .0005 0-25-0 TJ605-4065 36.98 25.95

SAVEUP TO

29%

$2295As Low As

$2295

SAVE49%


$7995Mfr's List$157.50

06-07 EH 10-11 Indicators Bkg_Layout 1 10/15/10 10:02 AM Page 1



















IndicatorsREADY TO SHIP!


•1" travel dial indicator, .001" grad., lever-operated

• On-off magnetic base indicator holder with fine adjustment

•22 pc. indicator point setReg. Sale

Description Model # Price PriceWhite FaceIndicator & Base TJ505-1848 $33.98 $16.95Black FaceIndicator & Base TJ628-3040 29.98 16.95Indicator, Base & Points TJ628-3041 36.74 18.95

Dial Indicator& Base Sets

SAVEUP TO

50%


$2995Reg. Price$60.98

Granite Surface Comparator StandWith Fine Adjustment

Premium Quality Stand•Base 2" thick

x 6" square•.00005" flatness •71⁄4" high Dial Indicator•2 AGD • 1.000" meas. range•29⁄32" dial dia.•0-100 dial read.• .001" grad.

Includes BONUS Dial Indicator!

SAVE50%

Dial IndicatorsAGD Group 2

Reg. SaleMfr's # Model # Price Price52-520-109 TJ307-0718 $37.98 $19.9552-520-110-1 TJ890-9952 65.98 37.95

$1995Starting At

$1995

Features:• 1.000" range • .001" graduation • Continuous reading 0-100 • Revolution counter hand • Lug back mount • Black dial faceTJ890-9952 also includes:• Carbide contact point • Certificate of calibration• Solid brass housing SAVE

UP TO

47%

IP42 Dust/Water Protection Series 543•23⁄8" dial face • No over-speed errors •ABS sensor • 3⁄8" stem diameter•Absolute linear encoder tracks the origin •SPC data output • Large, easy-to-read LCD • IDS style • Lug back

0-.5" Digimatic IndicatorsSAVE

OVER

10%

$20995Your Choice

$20995

Mighty Mag Magnetic Basewith Indicators

•A universal magnetic base that will save time andimprove accuracy

•Strong magnet with 45 lbs. of holding power •Zinc die-cast housing•Six different locations for mounting accessories:

—3 positions 1⁄4"-20 for lug mounts —1 tapped hole 10-32—1 reamed hole 3⁄8" diameter—1 V-shaped hole in back: 1⁄8 to 5⁄16"

•Base: 41⁄2 x 1 x 11⁄4"• Dial indicators are .001" graduation,

AGD 2, 0-100 reading

Reg. SaleDescription Model # Price PriceMighty Mag Base Only TJ625-0440 $15.95 $11.95Mighty Mag w/1" Import Dial Indicator TJ505-1852 25.98 19.95Import Base w/2" Import Dial Indicator TJ625-0460 33.98 25.95

$1195Starting At

$1195

Universal Test Indicator Holder•Ideal for Bridgeports

•Suitable for all popular indicators with 5⁄32" shank or dovetail•Does not disturb the working tool•Adapts immediately for fast and positive indicatingIndicol designed with 3 bearing pads properly spaced and anopposite pressure screw securing the rigidity of the mounting•For Bridgeport "J" head sizeAdjustol•Allows extremely fine adjustment of your indicator

by means of a patented differential screw

Reg. SaleDescription Model # Price PriceIndicol TJ891-5414 $54.98 $41.95Indicol w/Adjustol TJ891-5415 73.98 65.95

$4195Starting At

$4195

SAVEUP TO

23%

Indicol w/Adjustol shown

Mfr's SaleResolution Accuracy Model # List Price.0001" .00012" TJ308-0468 $243.00 $209.95.00005 .00012 TJ308-0470 243.00 209.95

CenteringIndicator

•For centering a workpiece or fixture within .0002" of true center

•1.6" dia. indicator face remains stationary while the machine spindle rotates

•.005" graduation•Includes points,

feelers, restraining arm and fitted plastic case



SAVEUP TO

25%

06-07 EH 10-11 Indicators Bkg_Layout 1 10/15/10 10:02 AM Page 2
















Micrometers

8

Over 90,000 PRODUCTS Available

0-6" OutsideMicrometer Set

•Positive lock and carbide-tipped with.0001" graduations • Ratchet thimble

•5 standards • Adjusting wrenches•Fitted case

SAVE58%

Micrometer Stands•Designed to allow bench-top use with

hand micrometers or other gages whichhave frame area sufficient to hold • For .5" thru 4"micrometers

Wt. Reg. SaleMfr's # Lbs. Model # Price PriceImport— 2.34 TJ600-0099 $20.70 $12.95Mitutoyo156-101 2.92 TJ600-0098 85.98 75.95

SAVEUP TO

37%$1295As Low As

$1295

Outside Digit Micrometers

Meas. Reg. SaleRange Model # Price Price1-2" TJ600-2323 $55.98 $21.953-4 TJ600-2327 79.98 45.950-3" Set TJ621-2330 101.98 59.95

$2195 Starting At

$2195

SAVEUP TO

60%•Carbide faces on anvil and spindle

•.0001" graduations on vernier scale

•Ratchet stop •Digit counter: .001" •1-2" and larger furnished

with standards•Includes fitted case

IP54 Digi-Micrometer

•Protected to IP54 specifications•0-1" /0-25mm range • Rugged steel design•Large LCD • Absolute and

incremental modes•.00005" /.001mm resolution •Direct RS232 output•Carbide measuring faces•.0001" graduations on sleeve •Includes case

SAVEOVER

15%


$105 Mfr's List$125.00

BONUS BALLATTACHMENT

INCLUDED

Outside Micrometers & Sets•Carbide tipped • Baked-enamel frame•Satin-chrome-finished sleeve and thimble•New, improved lever lock • .00003" flatness•.00005" parallelism•Tapered frame for

hard-to-reach places•Ratchet thimble•Spindle thread hardened,

ground and lapped•Ground with microlap finish on ends•Clear, crisp graduations • 2-12" range

furnished with standards • Includes fitted case

$2299Starting At

$2299

Meas. Standards Mfr's SaleRange Graduation Included Mfr's # Model # List Price0-1" .001" No 52-253-101 TJ619-3113 $26.00 $22.990-1 .0001 No 52-240-001 TJ619-3106* 31.00 27.991-2 .0001 No 52-240-002 TJ619-3107* 36.00 32.992-3 .0001 Yes 52-240-003 TJ619-3108 42.00 36.993-4 .0001 Yes 52-240-004 TJ619-3109 47.00 41.994-5 .0001 Yes 52-240-005 TJ619-3110 52.00 46.995-6 .0001 Yes 52-240-006 TJ619-3111 57.00 51.996-7 .0001 Yes 52-240-007 TJ619-3112 62.00 55.99Sets0-4 .0001 Yes 52-215-004 TJ601-3010 172.00 154.990-6 .0001 Yes 52-215-006 TJ601-3012 265.00 209.990-12 .0001 Yes 52-215-012 TJ619-3115 796.00 559.99*Friction thimble

SAVEUP TO

29%On Sets


$7889Reg. Price$189.98

Micrometers & SetsWith Insulated Frames

•Resolution: .0001" • Carbide measuring faces •Ratchet thimble; locking nut•Sets and sizes over 1" supplied with standards •Includes shop-hardened case

$2195As Low As

$2195

SAVEUP TO

58%Meas. Mfr's SaleRange Model # List PriceEconomy0-1" TJ890-9844 $34.95 $21.951-2 TJ890-9845 40.95 25.952-3 TJ890-9846 50.50 29.950-3 Set TJ890-9861 126.00 65.95Digit0-1 TJ325-8100 78.95 37.951-2 TJ325-8101 82.95 42.952-3 TJ325-8102 94.50 47.950-3 Set TJ890-9951 262.50 109.95

08-09 EH 10-11 Micrometers_Layout 1 10/15/10 10:03 AM Page 1



























MicrometersOnline at use-enco.com


IP54 Electronic MicrometersMeas. Mfr's LowRange Model # List Price1-2" TJ307-0141 $110.00 $95.002-3 TJ307-0142 120.00 109.003-4 TJ422-3306 140.00 124.004-5 TJ422-3308 156.00 135.00

$95As Low As

$95•Water, oil and fluid resistant •Large LCD •Automatic switch-off •Direct RS232 output •.00005"/.001mm resolution •Includes shop-hardened case

SAVEUP TO

13%

Depth Micrometers•.001" graduations •4" base hardened and

ground, lapped•Satin-chrome finish•Ratchet thimble and

locking clamp•Includes case

SAVE21%

Meas. No. of Mfr's SaleRange Rods Mfr's # Model # List Price0-4" 4 52-225-114 TJ307-2930 $92.50 $72.950-6 6 52-225-116 TJ307-0140 110.00 85.95

Value-Line OutsideMicrometersHigh Precision & Durability

•.0001" straight-line graduations•Friction thimble; can also be

used as solid thimble•Spindle locking lever•Black enamel frame•Carbide faces on anvil and spindle•Micrometers not provided with standards

Meas. Mfr's SaleRange Mfr's # Model # List Price0-1" 599-1-44 TJ600-1138 $102.00 $75.951-2 599-2-44 TJ600-1142 113.00 89.952-3 599-3-44 TJ600-1144 114.00 89.953-4 599-4-44 TJ600-1148 119.00 89.954-5 599-5-44 TJ600-1150 125.00 95.955-6 599-6-44 TJ600-1152 134.00 99.95

SAVEUP TO

25%

$7595Starting At

$7595

0-1" EZ-Read Digit Counter MicrometerDirect Reading to .0001" WITHOUT a Vernier!


$3599Mfr’s List$47.00

•Carbide-tipped measuring faces•Insulated steel frame •Meets or exceeds Federal accuracy specs

Blade Micrometers

Measuring Reg. SaleRange Grad. Model # Price Price0-1" .001" TJ325-1301 $99.98 $59.951-2 .001 TJ307-0006 115.98 84.950-1 .0001 TJ325-1302 115.98 68.951-2 .0001 TJ307-0007 132.98 79.95

•Fast and accuratemeasurement

•Spindle and anvil arehardened, ground and lapped

•Easy and accuratereading

SAVEUP TO

40%

$5995Starting At

$5995

Outside Micrometers & Set•Carbide measuring faces •Baked-enamel frame•Barrel and thimble

satin-chrome finished•Standards included above 0-1" •.0001" graduation •Ratchet thimble and

spindle lock•Includes fitted case

OUR TERMS OF SALEIT'S IN STOCK AND READY TO SHIP!• 99% In-Stock Inventory!

• All in-stock orders ship within one business day. Ask your sales associatefor details

SHIPPING DETAILSOur primary shipping method for orders weighing less than 125 lbs.is UPS Ground. Some items weighing less than 125 lbs. must beshipped truck due to size or fragility. DOT regulated items cannotbe shipped via air. Alaska, Hawaii and Puerto Rico customers -Air shipments only."Free Shipping" applies to select items that are identified in a current Enco catalog. "Free Shipping" means standard ground(small parcel or truck) shipment to a location within the contiguousU.S. only. Lift gate and other non-standard services will incur anadditional charge; call for details.Enco does not accept C.O.D. payment for any order. Residential deliveries will incur a $1.15 surcharge. Rural deliveries will incur a$1.75 surcharge.

RETURNS You may return an item for credit within 30 days of shipment, provid-ed it is unused and in resalable condition, found to be defective, or notspecifically restricted from returns.

Call Enco at 800-USE-ENCO to obtain a Return Authorization (RA) number. No returns will be accepted without an RA number.Machinery will be repaired or replaced at Enco's discretionand according to our Machinery Warranty; ask for detailsbefore purchasing.

All prices are subject to change without notice. Pricing, photographicand typographical errors are subject to corrections. For completeTerms of Sale, see the current Enco Master Catalog, visit use-enco.com,or call 800-USE-ENCO.

Meas. Mfr's SaleRange Accuracy Model # List Price0-1" .00016" TJ317-0764 $62.98 $42.951-2 .00016 TJ327-3223 71.98 49.952-3 .00020 TJ327-3224 75.98 56.950-3" Set — TJ327-3234 202.98 148.95

$4295Starting At

$4295

$7295As Low As

$7295

SAVE23%

08-09 EH 10-11 Micrometers_Layout 1 10/15/10 10:03 AM Page 2
























Measuring Instruments

10

The Lowest Prices in the

Magna Visor KitInterchangeable Lenses: 6, 8 & 12"•Magnification: 1.8, 2.2, 2.6x •Focusing distance with auxiliary lens:

7.2, 8.8 and 10.4 diopters•Comfortably adjusts to all head sizes•Soft, padded headband removes for

cleaning • Can be worn over prescriptionor safety glasses


$3395Reg. Price$56.98

SAVE40%

•Check primary, 1⁄2 primary, and complementaryangles, I.D. or O.D.chamfers–in or outof the machine

•Stainless steel, satin finish

• Eight gaging surfaces per gage

SAVE57%

Magnetic BasesWith Top or Base Mounted Fine Adjustment

•Unique central locking mechanism with spring-loaded bearing • On/off magnet • Models with adjustment on top have universal

swivel clamp that holds 3⁄8", 8mm, 6mm dovetail •Models with adjustment on base hold 3⁄8" stem and dovetail

Bottom Top Magnetic Reg. SaleArm L Arm L Pull Lbs. Model # Price PriceFine Adjustment on Top2.20" 2.00" 70 TJ326-1369 $80.98 $59.955.26 5.24 175 TJ326-1366 127.98 95.95Fine Adjustment on Base2.20 2.00 63 TJ891-5391* 97.98 69.954.33 3.98 65 TJ326-1359 110.98 89.955.26 5.24 175 TJ326-1364 135.98 99.95

SAVEUP TO

28%

*Permanent magnetic

$5995As Low As

$5995

V-Blocks

•Close-grained cast iron•Squareness and parallelism of

V-grooves within .0012"•90° V is centered, square with

the sides and parallel to thebase • Supplied in numberedpairs

Overall V Wt. Price Per PairW x L x H Width Lbs. Model # Reg. Sale15⁄16 x 3 x 23⁄8" 13⁄4" 3.2 TJ990-3317 $20.00 $15.9519⁄16 x 4 x 29⁄16 23⁄16 5.5 TJ990-3318 27.98 21.9527⁄16 x 6 x 31⁄2 31⁄16 14.2 TJ990-3320 51.98 42.954 x 8 x 51⁄2 41⁄2 40 TJ990-3321 111.98 99.955 x 10 x 61⁄2 5 67 TJ990-3322 199.98 169.956 x 12 x 8 51⁄8 78 TJ990-3323 291.98 259.95

$1595As Low As

$1595

SAVEUP TO

21%

V-Block &Clamp Sets

Hardened & Ground•All sides are precision-ground square and

parallel to each other • Accurate enough tobe used in layouts and surface plate work

•2 V-blocks and 2 clamps per set•Style B: one V-block and clamp per set

$2595As Low As

$2595Style B

SAVEUP TO

45%

Cap. Reg. SaleDia. W H L Model # Price PriceStyle A1" 5⁄8" 13⁄8" 13⁄4" TJ420-5420 $47.98 $25.95Style B13⁄8 21⁄2 21⁄2 2 TJ420-5611 39.06 32.9521⁄4 3 4 3 TJ420-5616 74.98 59.95

Style A

•For quickly locating work edges • Hardened and groundIncludes:•Single 1⁄2" diameter shank–.5000" tip•Double end–.5000" and .2000" tip 1⁄2"

diameter shank•Single 3⁄8" diameter shank–.2000" tip•Double end 1⁄2" diameter shank–.2000"

tip with centering point

4 Pc. Edge Finder Set


$1495Reg. Price$25.98


$1995Reg. Price$46.98

18 Pc. AngleGage Set

SAVEOVER

40%

Machinist Square Sets•Hardened spring steel blades are

permanently secured to base for rigidity•Precision ground to ensure straightness

and parallelism •Working edges of each blade are lapped

for accuracy•Manufactured to exacting specifications

Mfr's SaleSet Model # List Price3 Pc.: 2, 3 & 4" TJ326-1318 $46.98 $38.953 Pc.: 2, 4 & 6 TJ326-1319 48.98 41.954 Pc.: 2, 3, 4 & 6 TJ326-1320 58.98 51.95

$3895As Low As

$3895

SAVEUP TO

17%

Blade L Base L2" 2"3 21⁄24 36 4

Heavy-DutyMagnetic V-Base

•M8 x 1.25 tapped hole•Dimensions: 25⁄8L x 2W x 21⁄8"H•Two magnetic mounting surfaces -

bottom and back • On-off magnet assembly•Magnetic pull: 130 lbs.

SAVE25%



10-11 EH 10-11 Meas Inst_Layout 1 10/15/10 10:03 AM Page 1






















Measuring InstrumentsIndustry GUARANTEED!


Sets Z Depths Quickly& Accurately

Depth Setter

•Lower cutting tool toward Tool Set—indicator will light up on contact

•Can be operated directly off table or from machine vise

•Aluminum contact face eliminates carbide chipping on cutting tools

•Repeatability: .0002"•Block dimensions:

1 x 2 x 3" •Batteries included

SAVE44%


$4595Mfr’s List$83.15

9 Pair UltraPrecision WavyParallel Set

•High-quality spring steel, hardened, stress relieved, and precision ground

•Parallel within ±.0002"; paired ±.0002"•41⁄4" length; heights of 1⁄2, 5⁄8, 3⁄4, 7⁄8, 1,

11⁄8, 11⁄4, 13⁄8 or 11⁄2"•Shims can be compressed to hold thin parts• Complete with fitted wooden case


$7599Reg. Price$126.72

SAVE40%

•Repeatability: .0002"•Reads off any

electronically conductive metal•Cylindrical style head •1⁄2" shank•Furnished with

LED indicator and case

Electronic Edge Finder


$1995Mfr′s List$27.98

Double DialDepth Gages

•Dial is graduated in both inch (black dial) and metric (red dial)

•Features separate hands for inch and metric measurements for easy recognition

•.100"/2mm range per revolution•.001"/.02mm graduations•Made of hardened stainless steel •Includes case

Max. Meas. Reg. SaleRange Model # Price Price6"/150mm TJ328-6222 $54.98 $29.998"/200mm TJ328-6223 58.98 33.79

$2999As Low As

$2999SAVE

UP TO

45%

•Measures inside diameters or widths of small shallow holes or slots

•Half-ball construction permits use notaccessible with full-ball style into slot or hole

•Simply insert, lock in place, remove andtake micrometer measurement

• Vinyl case

4 Pc. Small HoleGage Set


$2295Reg. Price$39.98

SAVE42%

Flat Bottom Measuring Range 1⁄8" to 1⁄2"

7x MiniComparator

•Simple compact design comparatorwith Doublet-type achromatic lens

•Focusing ring with smooth multiplethreads for sharp images

•27⁄32" body height•Accepts standard

1" diameter reticles #1 through #13

Includes: #5 reticle and case.

Bench Block•V-groove across face to

accommodate round stock•Hardened and ground

with 8 holes 1⁄8 to 5⁄8"•3" diameter, 11⁄2" high


$1999Reg. Price$31.98

SAVE37%

Inspection MirrorsFor Hard-to-See Work

Features polished mirrors and ball socket joint.11⁄4" Dia. Round •With 6" plated handle

and pocket clip • Overall length 8"2 x 1" Oval •With plated steel

handle and pocket clip

• Overall length 9"21⁄4" Dia. Round •With telescoping

handle • Overall

length 15", extended31⁄2 x 2" Rectangular •With telescoping handle • Overall length 16"

$429As Low As

$429Reg. Sale

Description Model # Price Price11⁄4" Dia. Round TJ240-0389 $6.16 $4.292 x 1" Oval TJ240-0391 6.16 4.2921⁄4" Dia. Round TJ240-0390 8.82 5.9931⁄2 x 2" Rectangular TJ240-0392 8.82 5.99


$5495Mfr's List$70.98

SAVEUP TO

32%

10 Pc. Angle Block Set•3" long x 1⁄4" thick•Angular accuracy: .0003"

per inch 30± arc seconds•Precision-ground steel•1° increments to 5°,

5° increments to 30°•Oil-hardened•Includes fitted case


$2995Reg. Price$59.98

SAVE50%

SAVEOVER

20%
















12

FAST & FRIENDLY Customer

4 Pc. EdgeFinder Sets•Two single-end and two

double-end edge finders•Locates work edges

quickly and accurately •All working surfaces

hardened, ground and lapped

SPI shown

SAVEUP TO

32%

$2595Starting At

$2595

Mfr's SaleBrand Model # List PriceSPI TJ307-1736* $37.98 $25.95Fowler TJ308-0503 41.55 32.95Brown & Sharpe TJ307-1826 51.17 45.95 *Includes case

20 Pair Ultra-Thin Parallel Set1⁄32" Thick • 6" Long

•Hardened steel • Includes fitted case •11⁄2-111⁄16" in 1⁄16" increments •±.0001" parallelism •Paired in height*: ±.0001" • 50 HRC *Related to consistency within each pair. Absolute height is held to ±.001".


$10995Reg. Price$183.98

SAVE40%

45x Fine Centering ScopeWith Crosshair Reticle

•±.0001" accuracy •3" length•3⁄8" shank dia. •1⁄8" field of view•1" working distance

from end of lens mount•60° eyepiece angle


$18995Reg. Price$239.98

SAVE20%

Save Time& Money!

The Rockwell value isprinted on each handle and the filesrange from HRC 40 through HRC 65.Specially curved tips can reach intointernal slots, grooves and bores which cannot be tested using conventional types of testers. Each has a non-slip grip, color-coded handle.Includes: Deluxe fitted case, instructions and conversion chart Rockwell C to Vickers.

Minus PlusTolerance Tolerance

Measuring No. of +.0000-.0002" +.0002-.0000" Mfr's SaleRange Pcs. Model # Model # List Price.011-.060" 50 TJ326-1328 TJ326-1327 $58.98 $39.95.061-.250 190 TJ326-1330 TJ326-1329 128.98 79.95.501-.625 125 TJ326-1334 TJ326-1333 222.98 154.95.626-.750 125 TJ326-1336 TJ326-1335 245.98 168.95.751-.832 82 TJ326-1338 TJ326-1337 334.98 218.95.833-.916 84 TJ326-1340 TJ326-1339 355.98 228.95.917-1.000 84 TJ326-1342 TJ326-1341 409.98 268.95

Class ZZ Steel Pin Gage SetsRange: .011-1.000"•Use to measure hole sizes, slot widths, calculate

distances between holes or use as GO/NO GO gaging•Class ZZ guaranteed to .0002" tolerance limit

$3995Starting At

$3995SAVE

UP TO

38%

Steel Protractors

•Used for setting bevels, transferring ofangles and many other uses

•Permanently etched graduations from0° to 180° in opposite directions

•6" protractor arm•33⁄8" wide by 2" high head•Supplied in plastic pouch SAVE

44%

For Use In AllMetalworking

Facilities! $8995Sale PriceModel# TJ505-1898

$8995Mfr's List$108.98

SAVEOVER

15%

6 Pc. Portable RockwellHardness Testing Files

Mfr's SaleHead Model # List PriceHalf-Round TJ240-0304 $9.90 $5.49Rectangle TJ635-6600 9.90 5.49

$549Your Choice

$549

Half-Round Head

Rectangle Head

4 Pc. CombinationSquare Set

•12" hardened blade •Square head with steel scriber •Grads.: 4R–8ths, 16ths, 32nds and 64ths 10 Tools in 1: •Level • Square • Plumb • Steel rule • Center gage • Height gage •Scriber • Marking gage • Level protractor • Depth gage


$2995Reg. Price$38.21

SAVEOVER

20%

A simple solution to squaring your machine. Just zero indicators on flat surface, install in milling machine spindle, bring the spindle down to the table and adjust the head until both indicators read the same.•1⁄2" shank • Fully assembled with indicators mounted and

ready for use • No more tramming or split reading, compensating for loose, worn gears or mirrors

•Can also be used with a sine bar or protractor to set angle

•Heat-treated, ground steel for durability and accuracy•Furnished in a fitted case

Spindle Square™


$15895Mfr’s List$177.98

SAVE10%


























Measuring InstrumentsService – 800-USE-ENCO


Dial HeightGages

SAVE50%

•.001" graduations•Fine adjustment and lock•Shockproof •Stainless steel beam

$5349Starting At

$5349

GO/NO GO Double End Gage Handles

•Select handle with range appropriate for pins to be held

Size Reg. SaleRange Model # Price Price.010-.075" TJ240-0134 $6.29 $3.99.075-.180 TJ240-0135 6.91 4.99.180-.281 TJ240-0136 8.22 5.99.281-.406 TJ240-0137 9.55 6.99.406-.510 TJ240-0138 11.75 7.99.510-.635 TJ240-0139 15.04 10.99.635-.760 TJ240-0140 17.06 11.99.760-.010 TJ240-0141 26.98 19.99

$399As Low As

$399SAVE

UP TO

36%

Mfr's SaleSizes Model # List Price2, 3, 4, 6" TJ307-0722 $61.90 $49.954, 6, 9, 12 TJ307-0723 103.95 88.95

4 Pc. SteelSquare Sets

•Made in USA of the finest Sheffield steel•Beams and blades ground and lapped

for straightness and parallelism•Beam grooved at inner corner

for clearance of burs and dirt •Hardened blades•Shop-hardened case

$4995Starting At

$4995

Rectangular Gage Block Sets

Wt. Grade AS-2 Reg. Sale Wt. Grade 2 Reg. Sale Wt. Grade 3 Reg. SaleSet Lbs. Model # Price Price Lbs. Model # Price Price Lbs. Model # Price Price36 Pc. 3.9 TJ630-4105 $94.98 $59.95 — 3.75 TJ630-4104 $236.98 $129.9581 Pc. 7.1 TJ630-4115 161.98 59.95 6.9 TJ630-4124 $410.98 $269.95 7.0 TJ630-4126 352.98 209.95

81 Pc. Set

•Grade 2 & 3 sets include a Certificate of Accuracy traceable to the National Bureau of Standards • Grade AS-2 accuracy: ±.000050"

•Supplied in a wooden case36 Pc. Set •Includes 1 Block .050", 10 Blocks .1000-.1009" in .0001"

steps, 9 Blocks .101-.109" in .001" steps, 9 Blocks .110-.190" in .010" steps, 4 Blocks .200-.500" in .100" steps, 3 Blocks 1, 2, 4"

81 Pc. Set •Includes 1 Block .050",

10 Blocks .1000-.1009" in .0001" steps, 49 Blocks .101-.149" in .001" steps, 17 Blocks .150-.950" in .050" steps,4 Blocks 1, 2, 3, 4" in 1.000" steps

SAVEUP TO

63%

$5995Starting At

$5995

Pocket-size gage has 22 precision surfaces for specifying and controlling surface finishes. Includes lapped, ground, turned and milled specimens, ranging from 2 to 500 microinches. Made to ASA standard B46 2.1955. Dimensions: 5L x 2"W with pouch.

Surface Finish Comparator Gage


$3295Reg. Price$52.98

SAVE37%

$8595Starting At

$8595

Dial Height Gages

•.100" grad. for quickcoarse readings with.001" graduations onindicator for fine readings

•Carbide-tippedscriber

With Dual Directional Digit Counter

SAVEUP TO

47%

Meas. Reg. SaleRange Model # Price Price12" TJ621-8412 $157.98 $85.9518 TJ621-8418 248.98 129.9520 TJ240-0069 289.98 159.9524 TJ621-8424 331.98 189.95

6 Pc. Telescoping Hole Gage Set5⁄16-6" Measuring Range

•Constant spring tension for uniform contact pressure•Plunger on gage expands in hole to be measured, locks in

place and gage is removed from the hole. Final hole size is obtained by measuring over contacts with a micrometer

•Satin-chrome finish • Rigid handle with self-centering feature

•Contact points are hardened tool steel and precision ground on the end measuring radius

•Supplied in fitted case$3995Sale PriceModel# TJ327-0060

$3995Mfr's List$70.98

Measuring Reg. SaleRange Model # Price Price6" TJ891-6098 $106.98 $53.498 TJ891-6099 123.98 61.99

• Used for a variety of surface plateapplications

• Large fine adjustmentknob for control

• Swivel clamp anchorsswivel and indicator for added accuracy

• Rear surface of thegage has a reference surface to squareagainst a master for checking squareness

• Includes 6 x 4"post, indicator rod and clamp

Mfr's # 53-620-010

Indicator and standard not included.


$193 Reg. Price$257.37

Height Transfer &Squareness Gage



























14

Shop the 2010 Enco Master Catalog

Positive Lock FloatingPositioners

Mfr's SaleDescription Model # List PriceBottom Mounting Hole 3⁄8"-16 TJ422-3492 $32.98 $27.95Magnetic Base (90 Lb. Pull)31⁄4"Dia. x .435"H TJ422-3493 45.98 38.95

3⁄8"–24 Thread1⁄2"

13⁄8"

13⁄4"

11⁄4" OD

TJ422-3492

Surface PlateCleanerContains No Class 1 Ozone-Depleting ChemicalsVery Low Evaporation Rate –Use Much Less Than Ordinary Cleaners•Free from strong odors•Excellent for cleaning surface

plates, metals, ceramics,as well as other hard surfaces

•16 oz. bottle

$2795As Low As

$2795


$295Reg. Price$3.70

SAVE20%

•OAL: 6" • Repeatability TIR within .0002"•Tool steel hardened to RC 60 •Four highly visible lights •One-piece construction for strength and accuracy •3⁄4" shank • Probe diameter: .310"•For accurate positioningIncludes: A-76 batteries

Electronic Edge Finder &Height Offset Gages

SAVEOVER

25%


$4995Reg. Price$69.98

Works with flat straight edges, shoulders, grooves, round work, studs, dowels orcenter points and scribed lines.

Edge & CenterFinders

B CA D E F*Plus conical head

Head Shank Reg. SaleType Dia. Dia. Model # Price PriceA. Single Head .200" .500" TJ636-7014 $8.00 $5.00B. Single Head .200 .375 TJ636-7016 6.80 3.95C. Single Head .500 .500 TJ636-7018 7.20 4.95D. Double Head .200 .375 TJ636-7030* 7.20 4.95E. Double Head .200 .500 TJ636-7019* 7.20 4.95F. Double Head .200/.500 .500 TJ636-7034 8.80 5.35

SAVEUP TO

41%

$395As Low As

$395

36 Pc. SpaceBlock Set

•For quick-setting stops and setups for lathes, milling machines and drill presses, or wherever accurate spacing is required, e.g. setting sine bars, etc.

•Accuracy: ±.0001" •3⁄4" diameter,

1⁄4"-28 ID thread •Ground, hardened and lapped

•Four connecting screws supplied to form any length desired

•Includes case

Blocks Included In Set:

.050" .100 .106 .125 .180 .600

.060 .101 .107 .130 .190 .700

.0625 .102 .108 .140 .200 .800

.070 .103 .109 .150 .300 .900

.080 .104 .110 .160 .400 1.000

.090 .105 .120 .170 .500 1.000

SAVEOVER

60%

•Magnification: 10x•Operates on 2 AA

batteries (not included)•Floods viewing

area with light through the lens itself


$2395

Illuminated CoddingtonMagnifier

Reg. Price $33.98

Wt. Reg. SaleSize Thickness Lbs. Model # Price PriceToolroom Grade B-No Ledge9 x 12" 2" 30 TJ640-0100 $38.98 $34.9512 x 18 3 85 TJ640-0120 78.98 70.9518 x 24 3 180 TJ640-0140 135.98 121.95Toolroom Grade B-2 Ledges18 x 24 3 182 TJ640-0142 86.98 77.95Inspection Grade A-No Ledge36 x 48 6 1140 TJ640-0480 351.98 315.95Stands24 x 36 100 TJ640-1020 173.98 155.95Plate & Stand Sets24 x 36 540 TJ640-1960 399.98 359.95

Black GraniteSurface Plates& Stands

Surface plates meet or exceed FederalSpecification GGG-P-463c. •Harder than steel, does not nick or bur, rust

or corrode • Guaranteed repeat readingPrices include certificate of inspection.Not NIST traceableSets include: •Grade B, 0-Ledge

surface plate plus heavy-duty stand with leveling screws

24 x 36" SurfacePlate and Stand

$3495As Low As

$3495

SAVE10%

LOCATE WORK SURFACES

EASILY, QUICKLY & ACCURATELY

SAVE29%

•Excellent dial indicator holder

•All-metal parts used •Precision angled

bearings interface and lock the ball precisely with a small turn ofthe locking knob • Excellent rigidity factor

•Self-compensating, no need to disassemble to re-establish tension

•Right angle notch (for 90° positioning) can be swung to any point 360° and then locked


$2995Reg. Price$79.98

TJ422-3493

SAVE15%























Measuring InstrumentsOnline at use-enco.com


•6 & 12" stainless steel blades • Reads to 5 min. or 1⁄12° • Satin-chrome

finish • Grad. 0-90-0, full 360°• Blade and protractor lock independently

to provide maximum control and optical magnifier on universal style

Universal BevelProtractor

SAVE54%


$7595Reg. Price$165.98

Dial Bore Gage Sets•Carbide anvils • .0005" graduation •Xtender model combines the

two most popular gage ranges in one set • Includes interchangeable extensions and case

*Comes with 2.5" probe

Measuring Mfr's SaleRange Model # List Price.7-1.5" TJ307-3432 $120.95 $79.952-6 TJ890-9842 99.95 81.951.4-6" Xtender TJ890-9981* 152.00 99.95

$7995As Low As

$7995SAVE

UP TO

34%

Mini-Mag ProtractorProvides instant 360° digital inclination display of any angle.•Embedded magnets with 35 lb. pull on two sides•Measuring range: 360° (4 x 90°)•Resolution: .05° • Accuracy: ±.2°•Repeatability: ±.1°•2.375L x 1.375W x 2.375"H•Standard 9v battery (250 hrs.)Mfr's # 54-422-450


$4995Mfr's List$79.95

SAVE37%5" Long Sine Bar

• Hardened and ground steel • 1" body size, top parallel to bottom of

rolls within .0002"

Sine Bar/Riser Kit


$9895Mfr’s List$117.78

18 Risers• 1⁄2 to 15°• Exact constant

within .0001"

Supplied in a protective molded case

SAVEOVER

15%

Flexible RulesSatin Chrome

Reg. SaleGraduation Style Size Width Model # Price Price1⁄32, 1⁄64, 1⁄10, 1⁄100 5R 6" 15⁄32" TJ319-9579 $6.51 $5.191⁄32, 1⁄64, 1⁄10, 1⁄100 5R 12 1⁄2 TJ319-9571 14.85 5.191⁄32, 1⁄64, 1⁄50, 1⁄100 16R 12 1⁄2 TJ319-9572 14.85 5.191⁄32, 1⁄64, 1⁄10, 1⁄100 5R 18 3⁄4 TJ319-9577 24.30 8.691⁄32, 1⁄64, 1⁄10, 1⁄100 5R 24 3⁄4 TJ319-9578 20.70 13.691⁄8, 1⁄16, 1⁄32, 1⁄64 4R 6 3⁄4 TJ319-9585 7.44 5.991⁄10, 1⁄100, 1.00mm, 0.50mm Dec./Met. 6 1⁄2 TJ319-9581 8.55 5.19

$519As Low As

$519

Class ZZ Steel Plug Gage Sets

•A must for setting micrometers, checkinghole diameter and distance between holesand hole location • Heat-treated to HRC60-62 • Smooth finish 10 micro or better

•Uniform 2" length, in increments of .001"

No. Minus Tolerance Plus Toleranceof +.0000-0002" Reg. Sale +.0002-0000" Reg. SalePcs. Size Model # Price Price Model # Price Price50 .011-.060" TJ616-8121 $45.98 $18.49 TJ616-8120 $45.98 $21.49190 .061-.250 — TJ616-8125 67.98 31.95125 .626-.750 TJ616-8141 167.98 81.49 TJ890-9743 167.98 74.4982 .751-.832 — TJ890-9744 248.98 99.4984 .833-.916 TJ616-8151 265.98 109.99 TJ890-9745 265.98 114.4984 .917-1.000 TJ616-8156 310.98 124.95 TJ890-9746 310.98 129.49


$54999Reg. Price$700.98

All 8 Minus Sets

SAVEUP TO

60%

DigitalProtractor & Levels• Instant LCD of level, tilt, true vertical or any

angle in between • Meas. range: 360° (90° x 4) • With 9 volt battery

• (2) 3V lithium batteries included

Mfr's SaleDescription Res. Acc. Model # List PriceProtractor ±.1° .1° TJ317-0585* $147.98 $98.95Pro 360 Level ±.1 .1 TJ240-0341 230.98 188.95Pro 3600 w/SPC Level ±.01 .05 TJ240-0343 357.98 308.95

SAVEUP TO

33%

* No air shipment

Multi-UseRule & Gage

•4" stainless steel, quick-reading 64ths and metric scale

•Drill point gage for checking 59˚ angle drill points

•Square and bevel protractor used for the measuring and laying out of angles

•Center finder for locating centers of shafts or circles

•Circle divider—up to 9 equal parts: for dividing circles into sectors, regular polygons and polygrams

•Tap drill table showing popular size taps with correct drill sizes for national form of thread


$895Mfr’s List$11.88

SAVE24%































Vises & Clamps

16

Easy, Secure ShoppingPrecision Screwless VisesHardened & Ground

•Precision-ground square and parallel to .0002" including jawsand vertical vees

Jaw Jaw Approx. Reg. SaleW x D Opening OAL Wt. Lbs. Model # Price Price2 x 1" 21⁄2" 51⁄2" 4 TJ505-2144 $73.98 $45.9521⁄2 x 11⁄4 33⁄8 7 41⁄2 TJ505-2143 98.98 54.9531⁄2 x 123⁄64 47⁄8 91⁄4 16 TJ891-5933 182.98 89.954 x 13⁄4 47⁄8 93⁄4 32 TJ428-9129 208.98 119.95

SAVEUP TO

50%

4-in-1 Clamping SystemIncludes Clamp, V-Pad & Extender Block

1. Standard—Thesliding arm clampis 10x faster thana C-clamp!

2. Pipe—Add the exclusive V-Pad tocreate a pipeclamp!

3. Spreader—Slide theclamp arm OFF andreverse to create aspreader clamp.

4. Step-Over—Addthe extender block tocreate a step-overclamp.

•Push lever to slide clamping arm on and off•Nickel/chrome-plated, heat-treated alloy steel

$1999Starting At

$1999

Clamp Clamping Reg. SaleSize Pressure Model # Price Price61⁄2" 1000 lbs. TJ893-2203 $23.89 $19.9981⁄2 1200 TJ893-2151 28.98 21.99121⁄2 1200 TJ893-2152 33.98 28.99101⁄2 2400 TJ893-2153 45.98 37.99121⁄2 2400 TJ893-2154 67.98 57.99

SAVEUP TO

24%

Reg. SaleBrand Model # Price PriceImport TJ505-6544 $82.98 $29.95Gibraltar TJ319-8531 104.98 75.95

52 Pc. Combination SteelStep Block & Clamp Sets

$2995As Low As

$2995

Includes: •24 studs: 4 each of 3,

4, 5, 6, 7 & 8" length •4 coupling nuts •6 flange nuts •6 T-slot nuts •6 serrated end clamps •6 step block pairs (1" width) •Wall holder • T-slot size: 5⁄8" •Stud thread size: 1⁄2"-13•T-slot nut width: 1"•For Bridgeport®-type milling machines•Gibraltar includes T-slot cleaner

Gibraltar

SAVEUP TO

63%Versatile Lock® CNC Vise•Converts into 12 different vises •Stronger, weighs less, clamps

up on part with less effort•Max. clamping force: 6356 lbs. • Manufacturer's lifetime warranty

AngLock® Vises•Needle-bearing thrust collar•Ground surfaces: vise bed top and bottom

jaws (in pairs), all jaw plate mounting surfaces•Eliminates jaw tilt • Max. clamping force:

D-40: 7807 lbs.; D-675: 6721 lbs.

Jaw Max. Jaw Wt. Mfr's SaleDescription Mfr's # Width Opening OAH OAL Lbs. Model # List PriceAngLock® Plain Base D-40 4" 3.875" 3.485" 13.040" 32 TJ425-7640 $661.45 $575.00AngLock® Plain Base D-675 6 7.5 4.610 18.75 78 TJ425-7760 487.80 409.00AngLock® Swivel Base D-675 6 7.5 4.610 18.75 78 TJ425-7800 811.80 579.00Versatile Lock® 3600V 6 6 4.922 17 69 TJ425-7460 794.60 699.00DoubleLock® DL430 4 3 3.970 17.465 45 TJ990-4069 1,225.00 959.00

Vises

DoubleLock® Vise•Handles twice as many parts per table with two clamping stations•Convertible to single station clamping for larger parts•Performs first and secondary operations simultaneously•New clutch design automatically returns to correct position•Max. clamping force: 4523 lbs. • .0002" accuracy•Manufacturer's lifetime warranty

AngLock®

$409Starting At

$409

SAVEUP TO

28%

See p. 9 for details

Max.Max. Jaw Load Cap. Mfr's Sale

Mfr's # Opening Lbs. Model # List Price401 1" 350 TJ505-4543 $11.34 $8.39405 2 800 TJ505-4544 13.72 10.99407 21⁄2 700 TJ505-4545* 15.10 11.79410 3 1500 TJ505-4546 19.60 15.25415 41⁄2 1700 TJ505-4547* 20.95 15.99420 6 2000 TJ505-4548 31.95 25.39421 6 2000 TJ505-4549* 34.86 26.99430 9 2500 TJ505-4550 92.55 68.79435 10 3500 TJ505-4551* 130.38 99.99440 12 6000 TJ505-4552 144.72 109.99

*Deep throat style

•Designed to eliminate distortion andprevent twisting • High-tensile steel

•Built-in “V” blocks •Floating jaws stay parallel •Copper-plated handle, jaws, and

screw ideal for welding use 6 Pc. Set includes: 2 pieces each of the 21⁄2, 41⁄2 and 6" deep throat sizes.

T-HandleClamps & Set

$8599

6 Pc. SetSale PriceModel# TJ505-6648

$8599

SAVEUP TO

26%If Purchased Separately$109.54

16-17 EH 10-11 VisesClamps_Layout 1 10/15/10 10:06 AM Page 1





























Vises & ClampsOnline at use-enco.com


Precision MillingMachine Vises

•Removable hinged handle for fast locking•No need to hammer

workpiece•Provides better

clamping pressure

Jaw Jaw Wt. Reg. SaleWidth Opening Lbs. Model # Price Price4" 41⁄8" 32 TJ425-7240 $116.98 $86.955 415⁄16 51 TJ425-7250 124.98 92.956 61⁄4 79 TJ425-7260* 148.98 110.956 71⁄2 110 TJ425-7265* 244.98 179.958 81⁄4 135 TJ425-7280* 211.98 159.95With Swivel Base4 41⁄8 47 TJ425-7241 146.98 99.955 415⁄16 71 TJ425-7251 174.98 121.956 61⁄4 74 TJ425-7261* 184.98 135.958 81⁄4 168 TJ425-7281* 240.98 179.95

SAVEUP TO

32%

$8695As Low As

$8695

*Truck shipment

Standard DepthC-Clamps

800 Series• Drop-forged, regular-duty with

standard-throat depth• A value alternative for clamping, not requiring

as much throat depth or clamping pressure asa 400 series clamp

• Drop-forged, equipped with Wilton®

Perma-Pads® and a precision-cut, single-lead acme thread

Jaw Throat Mfr's Mfr's SaleOpening Depth # Model # List Price0-2" 113⁄16" 14714 TJ240-0805 $28.00 $13.950-3 115⁄16 14728 TJ240-0806 30.00 14.950-4 25⁄16 14742 TJ240-0807 39.00 18.950-6 215⁄16 14756 TJ240-0808 56.00 27.952-8 37⁄8 14770 TJ240-0809 78.00 38.9511⁄2-10 33⁄4 14784 TJ337-1015 104.00 51.9511⁄8-12 37⁄8 14798 TJ337-1016 134.00 66.95

SAVE50%

$1395Starting At

$1395

Deep Throat Forged C-ClampsWith Perma Pads®

• Drop-forged steel frame with extra-deep throat formaximum clearance

• Acme roll-threaded screws for maximum strength

Throat Nominal Clamping Screw Mfr's SaleCap. D Pressure Dia. Model # List Price0-21⁄8" 21⁄4" 3500 lbs. 9⁄16" TJ337-1042 $30.00 $15.950-3 21⁄2 3500 9⁄16 TJ337-1043 32.00 16.950-41⁄2 31⁄4 6200 3⁄4 TJ240-0770 43.00 22.950-61⁄16 41⁄8 6600 3⁄4 TJ240-0771 65.00 34.952-101⁄8 6 8000 3⁄4 TJ337-1044 115.00 62.952-121⁄4 65⁄16 9300 7⁄8 TJ337-1045 163.00 88.95

SAVEUP TO

47%$1595Starting At

$1595

Rite-Hite® Hold-Down Clamps

•Instant adjustment up to 5" • Self-positioning •For milling, drilling, stamping, etc. •Use on any machine with a "T"-slot

Max. Nominal LoadStud Clamping Limit Reg. Sale Size Range Length Lbs. Model # Price PriceLong for Longer Setups3⁄8" 0-11⁄4" 31⁄2" 10,000 TJ505-4639 $33.98 $23.951⁄2 0-21⁄2 53⁄4 12,800 TJ505-4641 36.98 25.955⁄8 0-31⁄2 63⁄4 18,000 TJ505-4643 42.98 28.953⁄4 0-5 9 24,000 TJ505-4645 63.98 42.951 0-5 111⁄8 65,000 TJ505-4646 104.98 62.95Short for Closer Setups3⁄8 0-1 3 14,000 TJ505-4638 32.98 23.951⁄2 0-13⁄4 41⁄2 16,800 TJ505-4640 35.98 25.955⁄8 0-23⁄4 51⁄2 24,000 TJ505-4642 41.98 28.953⁄4 0-31⁄2 7 35,000 TJ505-4644 62.98 42.95

$2395As Low As

$2395

SAVEUP TO

40%

Milling Machine Vises•6" vise: bed height matched to size 2.875" ±.0005"•8" vise: bed height matched to size 3.310" ±.0005"•Rigid main screw design allows for higher

torque loads and clamping force•Repeatability within .001"•Hardened vise bed

and jaw plate•Limited lifetime warranty

Vise Jaw Jaw Jaw Max. Clamp. Wt. Mfr's. SaleSize Width Ht. Opening W Ht. OAL Force Lbs. Model # List Price6" 6" 1.75" 9" 83⁄4" 4.62" 17.2" 8200 lbs. 75 TJ308-0101 $461.00 $385.008 8 2.20 11 111⁄2 5.51 21.81 12,000 210 TJ328-0172 1,465.00 999.95

SAVEUP TO

31%$385Starting At

$385

•Precision-ground square and parallel to .0002" including jaws and vertical vees

•Made from tool steel, heat-treated to RC 58-62 • 27⁄8Wx 11⁄2"D jaw

• 41⁄2" jaw opening•81⁄4" overall length•Approx wt.:

10 lbs.


$6995Reg. Price$113.98

PrecisionScrewless ViseHardened & Ground

$7295As Low As

$7295

Rugged yet moderately priced vises.•Serrated steel, replaceable top jaws

•Built-in pipe jaws •Large anvil

Utility WorkshopVisesSwivel Base

Jaw Max. Jaw Pipe Mfr's SaleWidth Opening Cap. Model # List Price51⁄2" 5" 1⁄8-21⁄2" TJ426-1020 $141.00 $72.956 6 1⁄8-3 TJ426-1024 269.00 165.95

SAVEUP TO

48%

16-17 EH 10-11 VisesClamps_Layout 1 10/15/10 10:06 AM Page 2






































Vises & Clamps

18

It's IN STOCK and

Cradle-Style Angle Vises•Designed for drilling, tapping, or reaming

operations where a vertical setup angle is required •Cradle base has a 90˚ vertical scale in 1˚ graduations•Quick setup at 0˚, 45˚, 60˚ and 90˚ with positive pin stops•Hand-tightened mechanism allows secure locking in all positions•Base includes 1⁄2" shoulder slots for bolting to drill press

$3995As Low As

$3995Jaw Jaw Jaw Base Wt. Reg. SaleWidth Depth Opening Dim. Lbs. Mfr's # Model # Price Price3" 11⁄8" 3" 69⁄16 x 69⁄16" 13 AVC25 TJ891-4154 $52.98 $39.954 11⁄2 4 73⁄8 x 79⁄16 20 AVC35 TJ240-3004 68.98 55.95

Manufacturer's 2-Year Warranty

•Makes bending, forming and crimping jobs easier

•8" OAL •13⁄4"

jaw capacity

Sheet Metal ClampCan be used in horizontal, vertical and longitudinal positions. • Cast-iron body and slide are machined perfectly parallel

and square to ensure complete alignment of jaw• Main screw, handle and jaw plate are made of

high-quality steel • Acme thread screw with hexagonal head for tight clamping

• Stationary jaw has a vertical and horizontal 90° V-groove

Drill Press VisesSAVE50%

$1449Starting At

$1449Jaw Jaw Jaw Approx. Reg. SaleW Opening Depth OAL Wt. Lbs. Model # Price Price21⁄2" 21⁄2" 11⁄2" 71⁄4" 6 TJ426-8005 $28.98 $14.4931⁄2 31⁄8 11⁄2 91⁄4 91⁄2 TJ891-5931 36.98 18.494 4 11⁄2 11 17 TJ891-5932 53.98 26.95

Low-Profile DrillPress Vises

Designed for drilling, reaming and tapping operations.• Made from FC25, fine-grain cast iron with trapezoidal-thread

lead screw• Replaceable jaw is grooved for

holding round stock• Four slots for secure mounting


$1495Mfr’s List$24.22

$2195As Low As

$2195

Jaw Jaw Jaw Wt. Reg. SaleW Opening Depth Ht. Lbs. Model # Price Price3" 3" 11⁄8" 27⁄16" 10 TJ328-0113 $29.98 $21.954 4 11⁄2 27⁄8 15 TJ328-0114 43.98 29.956 6 2 39⁄16 36 TJ328-0115 78.98 52.958 8 2 39⁄16 54 TJ328-0116 105.98 71.95

• Base includes a keyway and two 7⁄16" bolt slots

• Made of FC25, fine-grain cast iron, trapezoidal-thread lead screw

• Replaceable, smooth jaw plates constructedof hardened and ground tool steel

• Mounting lugs for easy position setups• 41⁄2" jaw width • 11⁄4" jaw depth• 4" jaw opening

Low Profile Milling Vises360˚ Swivel Base

Reg. SaleModel # Price PriceTJ328-0151 $250.98 $179.95TJ328-0150* 162.98 119.95

*Without base

Precision GroundDrill Press Vises

Can be used in four positions, horizontal, left side, right side and on end. All sides ground at 90˚ to adjacent side.• Removable jaw inserts• Jaws include horizontal and vertical “V” grooves for holding rounds• Holds irregularly shaped materials easily without special fixtures• Heavy cast construction

Throat Jaw Jaw Approx. Reg. SaleDepth W Open. OAL Wt. Model # Price PriceGround Vises11⁄2" 21⁄2" 29⁄16" 7" 6 lbs. TJ891-5993 $65.98 $55.9513⁄4 3 31⁄8 8 10 TJ891-5994 118.98 75.95Angle Vise11⁄2 21⁄2 21⁄2 8 12 TJ240-2902 93.98 75.95

Ground Vise

Angle Vise

Precision ground for use in horizontal andvertical positions. Accurate to .001" onsquareness and parallelism.•Totally enclosed heat-treated screw •3⁄4" hex screw • 41⁄8" height•529⁄32" jaw opening•13⁄4" jaw height•171⁄2" overall length•Wt.: 80 lbs.

6" LockdownMachine Vise


$28995Reg. Price$371.98

18-19 EH 10-11 Vises-MTA_Layout 1 10/15/10 10:06 AM Page 1

















Machine Tool AccessoriesREADY TO SHIP!


3 & 6 Jaw Adjustable Steel Body"SET-TRU" Scroll Chucks

•Scroll and jaws hardened and ground•4 micro-adjustment screws•2-pc. hardened reversible jaws•For mounting "SET-TRU" plain back chucks

to lathe spindles—use "SET-TRU" back plates only (sold separately)

Enco•A unique micro-adjustment feature enables

concentricity to be adjusted to 0.0005" of full indicator movement, true position

•Hardened and ground pinion

Chuck Thru Approx. Enco Reg. Sale Thru Approx. Gibraltar Reg. SaleDia. Hole Wt. Lbs. Model # Price Price Hole Wt. Lbs. Model # Price Price3 Jaw6" 1.535" 20 TJ272-5000 $299.98 $224.00 1.535" 18 TJ328-0695 $598.98 $455.008 2.260 36 TJ272-5002 316.98 237.00 2.264 42 TJ328-0699 683.98 549.0010 2.830 60 TJ272-5004 480.98 359.00 2.835 66 TJ328-0702 876.98 699.0012 3.260 105 TJ307-0584 581.98 435.00 3.268 110 TJ328-0703 1,302.98 975.006 Jaw6 1.535 26 TJ272-5010 372.98 279.00 1.535 20 TJ328-0705 749.98 605.008 2.260 43 TJ272-5012 546.98 409.00 2.264 49 TJ328-0714 953.98 759.0010 2.830 80 TJ272-5014 677.98 508.00 2.835 73 TJ328-0715 1,222.98 915.0012 3.260 130 TJ619-3253 926.98 695.00 3.268 132 TJ328-0716 1,592.98 1,194.00

SAVEUP TO

25%

$224As Low As

$224

Gibraltar 6 Jaw

Gibraltar 3 Jaw

Quickie Vise Handles•Fits all 6" vises with 3⁄4" hex•Machined anodized aluminum

Mfr's SaleDescription Model # List PriceSingle Position TJ307-3726 $12.57 $10.95Double Position TJ307-3727 24.07 21.95

SAVEUP TO

12%$1095As Low As

$1095

•Rugged construction for smooth, chatter-free operation

•Precision boring head with integrated R8 shank

•21⁄2" head with 3⁄4" offset travel•1⁄2" diameter vertical and cross holes•Black-oxide finish•.001" direct reading micrometer dial

Boring Head with R8 Shank


$6395Reg. Price$128.74

SAVE50%

3-Jaw Precision Plain Back Self-CenteringScroll Chucks–Forged Steel Body

• 2-pc. hardened reversible jaws• Scroll and jaws hardened and precision ground• Requires Gibraltar back plate (sold separately)

Chuck Runout Thru Approx. Reg. SaleDia. Radial Axial Hole Wt. Model # Price Price6" .0012" .0014" 1.575" 18.30 lbs. TJ328-0428 $549.98 $409.008 .0016 .0018 2.559 31.09 TJ328-0429 664.98 498.0010 .0016 .0018 3.149 50.72 TJ328-0430 750.98 559.00

SAVE25%

$409As Low As

$409

Power MillingTable Feeds

For Bridgeport®-Type Milling Machines•Lightweight motor prevents table deflection•Safety clutch prevents damage

to lead screw or feeds•Smooth finish, regulated control

eliminates most second-finish cuts•Power at 110 volts, 50/60 cycle, 2.5 amps•Electric limit switches automatically

shut off at end of a cut•Controlled feed rate•Includes installation instructions

and mounting hardware

Power Reg. SaleFeed Model # Price Price140 lbs. TorqueTable Axis TJ205-6312 $671.98 $549.95Cross TJ205-6321* 742.98 649.95Z-Knees TJ205-6411 832.98 679.00150 lbs. TorqueTable Axis TJ205-6221 763.98 624.95Cross TJ205-6322* 888.47 699.95

*For 12" Cross Travel

SAVEUP TO

$188

$54995Starting At

$54995

Power Reg. SaleFeed Axis Model # Price Price135 lbs. Torque*Table x TJ205-6415 $370.60 $239.95150 lbs. TorqueTable x TJ307-3693 398.98 279.95Cross Saddle y TJ307-3694 455.98 328.95Knee z TJ307-3695 455.98 328.95

*Use 150 lb. torque models for Bridgeport® machines

SuperPower Feeds

For Bridgeport®-Type Milling Machines•110v with manual reset •Auto cutoff • Pilot light

Specifications

Speed Range: 1-9"/min.Rapid Traverse: 40"/min.Gearing: Helical

SAVEUP TO

$130

$23995Starting At

$23995

18-19 EH 10-11 Vises-MTA_Layout 1 10/15/10 10:06 AM Page 2
































Machine Tool Accessories

20


For Heavily Loaded Applications•Recommended for lathes •Runs at full power • Multi-speed

and multi-motor applications•These units are non-returnable;

ask our technical staff for assistance before ordering

Run 3-PhaseEquipment fromSingle-PhasePower

PHASE-A-MATIC™ Rotary Phase Converters

Rating Reg. Salehp Model # Price Price1 TJ297-3801 $453.98 $397.952 TJ297-3802 549.98 479.953 TJ297-3803 658.98 575.955 TJ297-3805 860.98 749.9571⁄2 TJ297-3807 1,129.98 983.9510 TJ297-3809 1,465.98 1,277.9515 TJ297-3811 2,053.98 1,789.9520 TJ297-3813 2,486.98 2,164.95

$39795Starting At

$39795

SAVE12%

1- Year Limited Warranty

Swing: 77⁄8" 9" 103⁄32"Type: BS-0 — BS-1Center Height: 315⁄16" 5.039" 53⁄64"Hole Thru Spindle: .709 — .787Spindle Taper B&S: #7 3MT #9Weight lbs.: 40 80 75

Semi-Universal Precision Dividing Head Sets

Specifications

$26999Starting At

$26999*Truck Shipment

•Adjustable 40:1 worm gear can be disengaged for direct indexing•Swivel head can be locked at any angle from 10° below horizontal to 90° vertical •.001" accuracy • Divides by direct or indirect dividing methods •Includes head stock, adjustable

tailstock, 3 dividing plates,center and drive dog assembly

Reg. SaleSwing Model # Price Price7 7⁄8" TJ203-4000 $481.98 $269.999 TJ325-1470* 677.98 509.00103⁄32 TJ203-4010* 493.98 365.00

TailstockHeadStock

SAVEUP TO

44%

DividingPlates

R8 Round Collet Sets

•Hardened and ground throughout •7⁄16"-20 drawbar thread

SAVEUP TO

49%Mfr's Sale

Set Sizes Model # List PriceImport6 Pc. 1⁄8-3⁄4" x 8ths TJ231-4606 $30.98 $22.9511 Pc. 1⁄8-3⁄4 x 16ths TJ231-4611 73.98 37.9513 Pc. 1⁄8-7⁄8 x 16ths TJ505-5022 83.98 47.9523 Pc. 1⁄16-3⁄4 x 32nds TJ231-4624 102.98 81.9525 Pc. 1⁄8-7⁄8 x 32nds TJ990-1342 163.98 86.95Lyndex13 Pc. 1⁄8-7⁄8 x 16ths TJ240-2880 310.00 179.9525 Pc. 1⁄8-7⁄8 x 32nds TJ505-2252 610.00 309.95

$2295Starting At

$2295

Neoprene Mounts

Thick, non-skid, neoprene cushion provides frictionand resists oil. No bolting to floor required.•Isolates impact and vibration•Zinc-plated hardware • Steel load

transfer plate • Cutoff stud fits in blind base holes

•1" leveling range • Locks to machine

$679As Low As

$679EachQty.: 4+

SaleLoad Range Base Bolt Usable Price EachPer Mount Dia. Thick. Dia. Bolt L Model # 1-3 4+50-250 lbs. 2 3⁄8" 3⁄4" 3⁄8"-16 3" TJ325-6627 $8.53 $6.79250-500 3 7⁄8 1⁄2-13 4 TJ325-6629 11.95 9.29500-1000 3 3⁄8 1 1⁄2-13 4 TJ325-6615 13.95 10.991000-2000 5 1 1⁄4 5⁄8-11 5 TJ325-6626 22.95 18.492000-4000 6 3⁄4 1 3⁄8 5⁄8-11 6 TJ325-6628 52.95 42.29

SAVEUP TO

22%On Qty.: 4+

Live Centers with 60˚ Included AngleDouble & Triple CNC Bearing

•Extended point for clearance•Heat-treated tool steel point•Triple bearing CNC extended

point for clearance

Morse Load Reg. SaleTaper Rating Lbs. OAL Model # Price PriceDouble Bearing2 750 411⁄16" TJ240-2809 $77.98 $54.953 750 57⁄16 TJ240-2810 93.98 65.954 1500 77⁄32 TJ240-2811 117.98 85.955 1500 89⁄32 TJ240-2812 160.98 115.95Triple Bearing2 1110 61⁄4 TJ240-2816 170.98 119.953 1110 67⁄8 TJ240-2817 174.98 129.954 1860 95⁄8 TJ240-2818 267.98 190.955 1860 103⁄4 TJ240-2819 288.98 219.95

SAVEUP TO

29%$5495As Low As

$5495

Screw Feed Tailstock•Center height adjustable from 3 to 41⁄2" •±11° tilt angle • Wt.: 7 lbs.Mfr's # 240-003


$8995Reg. Price$166.98

SAVE46%

20-21 EH 10-11 MTA_Layout 1 10/15/10 10:07 AM Page 1

































Machine Tool AccessoriesOnline at use-enco.com


•One jaw has V groove in horizontal plane•Second jaw has 2 V's in vertical plane,

plus 1 V, 45˚ •Accepts all shapes•5" (one size) fits all vises•Made of nylon•Overlap configuration

for easy positioning

Magnetic "Soft-Jaw"Vise Liners


$1195Reg. Price$16.24

SAVEOVER

25%

Live Center SetsWith 7 InterchangeablePoints

•Precision needle bearings•Hardened and ground•Accuracy guaranteed to

.0012-.0039" at center head

Morse Head Body Reg. SaleTaper Dia. Dia. OAL Model # Price Price2 15⁄16" 15⁄16" 521⁄32" TJ251-3020 $128.98 $64.493 11⁄8 111⁄16 613⁄16 TJ251-3030 136.98 68.494 17⁄32 129⁄32 73⁄4 TJ251-3040 159.98 79.99

$6449Starting At

$6449SAVE50%

ER Straight ShankStubby Collet Chucks

•Ideal for hard-to-machine surfaces•High-grade alloy steel•Inside backup screw with

left-hand thread and locknut included

Collet Shank Reg. SaleSeries Dia. OAL Model # Price PriceER-11 1⁄2" 3.50" TJ308-0018 $82.98 $46.95ER-11 5⁄8 3.50 TJ308-0019 93.98 52.95ER-16 5⁄8 3.65 TJ308-0020 108.98 60.95ER-16 3⁄4 3.65 TJ308-0021 102.98 57.95ER-20 1 3.75 TJ308-0024 115.98 65.95ER-25 1 6.10 TJ308-0025 158.98 89.95ER-25 11⁄4 6.10 TJ308-0026 140.98 78.95ER-32 1 6.20 TJ308-0027 171.98 96.95ER-32 11⁄4 6.20 TJ308-0028 152.98 85.95ER-32 11⁄2 6.20 TJ308-0029 146.98 82.95

$4695As Low As

$4695

3-Jaw Plain Back Lathe Chucks

1-Piece Jaw

2-PieceJaw

•Semi-steel body •Self-centering .003" TIR•Requires back plate (sold separately)

$6599As Low As

$6599Chuck Thru Wt. Reg. SaleDia. Hole Lbs. Model # Price Price1-Piece Jaw (Two Sets Included)3" .630" 5 TJ270-4070 $97.98 $65.994 .860 8 TJ270-4072 102.98 69.995 1.180 12 TJ270-4074 109.98 75.996 1.570 20 TJ270-4076 130.98 89.992-Piece Jaw8 2.360 35 TJ270-4025 168.98 125.9910 3.150 55 TJ270-4030 220.98 169.9912 3.930 109 TJ270-4035* 323.98 249.9915 5.320 152 TJ307-1747* 452.98 345.99

Back plates (Some Machining Required)Chuck Reg. SaleDia. Spindle Model # Price Price6" D1-4 TJ308-0123 $68.98 $43.998 D1-4 TJ308-0124 89.98 57.998 D1-6 TJ308-0125 137.98 81.7910 D1-6 TJ308-0126 167.98 99.9910 D1-8 TJ308-0127 178.98 106.2912 D1-8 TJ308-0128 196.98 115.99

*Truck shipment

6" Chuck Dia.Back plateSAVE

UP TO

32%On Chucks

JointMasterTM Angle Joining ToolsIdeal for Quick Hold & Release on Wood, Metal orSynthetic Materials

90° Fixed Angle•Retractable plate for edge alignment •V-grooves for securely holding round pieces•Ideal for holding two pieces of different

thicknesses that require individual adjustments30°-275° Adjustable Angle•Simply adjust to the desired angle, and “lock” into position

using the handle•Join round or flat workpieces, or materials with

different thicknesses

90° Fixed Angle

30°-275° AdjustableAngle

Throat Max. Reg. SaleDepth Cap. Model # Price Price90° Fixed Angle 2" 11⁄2" TJ328-2124 $33.98 $25.953 3 TJ328-2125 40.98 32.9530°- 275° Angle2 11⁄2 TJ328-2122 36.98 29.953 3 TJ328-2123 43.98 34.95

$2595As Low As

$2595

SAVEUP TO

23%

•Fully adjustable gibs•Micrometer dials with friction hold

allow dial to be "0" at any point •Table locking screws

Heavy-Duty Mill & Drill Table

Height: 5"Travel: 11" long, 71⁄2" crossBase: 8 x 101⁄2" with U-slots for bolts up to 5⁄8"Table Dim.: 6 x 181⁄2"T-slots: 9⁄16"Wt.: 56 lbs.

Specifications

SAVEOVER

15%


$145 Reg. Price$174.98





































22


Sliding Adjustment ±45° Range Worm Gear Adjustment +45°/-15° RangeOverall Wt. Reg. Sale Overall Wt. Reg. Sale

W L Height Lbs. Model # Price Price Height Lbs. Model # Price Price5" 7" 33⁄4" 12.6 TJ418-4200 $143.98 $69.95 31⁄2" 15 TJ418-4201 $85.98 $64.957 10 5 44 TJ418-4202 216.98 89.95 5 41 TJ418-4203 122.98 99.9510 15 61⁄2 92 TJ418-4204 248.98 149.95 —

Tilting Tables

Set work at any angle.•Machined T-slots • Two screws to lock

setting • Heavy solid casting • Graduated in degrees

SAVEUP TO

58%

$6495As Low As

$6495

Super Spacers

•24-position hardened and ground index platewith six masking plates for rapid indexing fordivisions of 2, 3, 4, 6, 8 and 12

•10-second vernier reading •Remove chuck to use as horizontal/vertical

rotary table • 360° graduation ring •Includes scroll chuck with faceplate and

2 pc. reversible jaws

ChuckCent. Center Face Wt. Reg. Sale

Size Hole H Plate Lbs. Model # Price Price6" 1.5" 5.100" 8" 105 TJ202-3012 $806.98 $698.008 2.25 6.100 10 166 TJ202-3030* 931.98 759.00Tailstock for 6" Super Spacer TJ308-0012 156.98 124.95

*2.25" hole continues through entire spacer

Indexing Accuracy: 3 min. max.Indexing Repeatability: 30 sec.Squareness Base to Chuck: .0012" max.Parall. of Chuck Face to Base: .0008"Concent. of Mounting Flange: .0008"

Specifications

$698Starting At

$698

SAVEUP TO

$172

R8 End Mill Holders & Set•Sizes 5⁄8" and up for single end mills only•Hardened and ground •8 pc. set includes sizes: 3⁄16, 3⁄8, 1⁄2, 5⁄8,

3⁄4, 7⁄8, 1, 11⁄4"

SAVEUP TO

50%

Reg. SaleBore Model # Price Price3⁄16" TJ210-0102 $23.82 $12.953⁄8 TJ210-0104 23.82 12.951⁄2 TJ210-0106 23.82 12.955⁄8 TJ210-0108 24.74 13.953⁄4 TJ210-0110 26.98 14.957⁄8 TJ210-0112 27.98 15.951 TJ210-0114 27.98 15.9511⁄4 TJ210-0116 37.98 18.9511⁄2 TJ210-0118 43.98 21.958 Pc. Set TJ505-5201 135.98 78.95

8 Pc. Set

$7895Only

$7895

8" Spacer•Complete with 2-piece reversible jaws •Designed for milling, drilling, jig boring and many common

shop applications•Six masking plates for 2, 3, 4, 6, 8 and 12 divisions are furnished•24-position index plate is hardened and ground •8", 3-jaw chuck • 25 sec. indexing accuracy •Satin-chromed graduation ring 360° and adjustable

vernier plate assure accurate reading to 5 min.•Clamping shoes lock spindle w/o

affecting spindle alignment

Squareness Base to Chuck: .0008" max. Parallelism Over Face: .0006" max.Concentricity of Chuck: .0005" max. Through Hole: 2.48"Center Height: 5.87" Weight: 130 lbs.

Specifications


$59595Reg. Price$782.98

SAVEOVER

20%

SAVEUP TO

31%

Arbor Presses

*Truck Shipment

Single-Leverage Type•Heavy-duty construction • Front/side gib

adjustment • Steel pinions and rams •Four-position anvil•Palmgren includes punch set for

specialized pressing

Tons of Max. Wt. Reg. SalePressure Work Ht. Lbs. Model # Price PriceEnco1⁄2 41⁄2" 25 TJ805-1005 $37.98 $25.951 51⁄4 40 TJ805-1010 56.98 39.952 81⁄2 88 TJ805-1020* 101.98 79.953 121⁄2 160 TJ805-1030* 147.98 125.955 17 360 TJ805-1040* 467.98 409.95Palmgren1⁄2 41⁄2 25 TJ890-8802 57.98 54.951 51⁄2 32 TJ890-8803 78.98 69.952 8 68 TJ890-8804 157.98 147.953 121⁄2 160 TJ890-8805* 233.98 203.954 153⁄4 225 TJ890-8806* 505.98 464.95

$2595As Low As

$2595

Range Reg. Salehp Model # Price PriceMedium-Duty1⁄3-3⁄4 TJ297-3510 $113.98 $84.953⁄4-11⁄2 TJ297-3520 127.98 95.951-3 TJ297-3530 141.98 98.953-5 TJ297-3540 165.98 118.954-8 TJ297-3550 203.98 153.95Heavy-Duty1⁄3-3⁄4 TJ297-3700 136.98 112.953⁄4-11⁄2 TJ297-3705 152.98 125.951-3 TJ297-3715 170.98 139.953-5 TJ297-3725 205.98 169.954-8 TJ297-3735 248.98 198.958-12 TJ297-3745 345.98 279.9512-18 TJ297-3755 645.98 528.95

Static Phase ConvertersRun 3-Phase Equipment From Single-Phase Power•Simple to hook up•Runs at 2⁄3 rated hp•These units are

non-returnable. Ask our technical staff for assistance before ordering

PHASE-A-MATIC™

$8495As Low As

$8495SAVE

UP TO

30%

22-23 EH 10-11 MTA Bkg_Layout 1 10/15/10 10:07 AM Page 1










































Machine Tool AccessoriesIndustry GUARANTEED!


Range Reg. Salehp Model # Price PriceMedium-Duty1⁄3-3⁄4 TH297-3510 $113.98 $84.953⁄4-11⁄2 TH297-3520 127.98 95.951-3 TH297-3530 141.98 98.953-5 TH297-3540 165.98 118.954-8 TH297-3550 203.98 153.95Heavy-Duty1⁄3-3⁄4 TH297-3700 136.98 112.953⁄4-11⁄2 TH297-3705 152.98 125.951-3 TH297-3715 170.98 139.953-5 TH297-3725 205.98 169.954-8 TH297-3735 248.98 198.958-12 TH297-3745 345.98 279.9512-18 TH297-3755 645.98 528.95

Static Phase ConvertersRun 3-Phase Equipment From Single-Phase Power•Simple to hook up•Runs at 2⁄3 rated hp•These units are

non-returnable. Ask our technical staff for assistance before ordering

PHASE-A-MATIC™

$8495As Low As

$8495SAVE

UP TO

30%Includes: •24 studs: 4 each of 3, 4, 5, 6, 7 & 8"

length • 4 coupling nuts • 6 flangenuts • 6 T-slot nuts • 6 serrated endclamps • 6 step block pairs (1" width)

•Wall holder • T-slot size: 5⁄8" •Stud thread size: 1⁄2"-13•T-slot nut width: 1"•For Bridgeport®-

type milling machines

52 Pc. Combination Steel StepBlock & Clamp Set

6" Precision Milling MachineVise with Swivel Base

6 Pc. R8 Collet Set•Sizes: 1⁄8-3⁄4"

•Removable hinged handle for fast locking•No need to hammer workpiece•Provides better clamping

pressure•61⁄4" jaw

opening•Wt.: 95 lbs.

59 Pc. R8 ToolingPackage

SAVE39%


$15995Reg. Price$263.98

SAVEUP TO

53%

5C EmergencyCollets

•Create any size collet byboring out to desired size

$589As Low As

$589Pilot Reg. Sale

Material Hole Model # Price PriceSteel 1⁄16" TJ230-4395 $12.70 $5.89Brass 1⁄16 TJ230-4396 24.43 21.95

End Mill GageShank Nose Line to Mfr's SaleDia. Dia. Nose End Model # List Price1⁄8" .69" 1.75" TJ240-3014 $132.00 $104.991⁄8 .69 2.5 TJ240-3015 132.00 104.991⁄8 1 3 TJ240-3016 144.00 114.993⁄16 .69 1.75 TJ240-3017 112.00 89.993⁄16 .69 2.5 TJ240-3018 112.00 89.991⁄4 .88 1.75 TJ240-3019 112.00 89.991⁄4 .88 2.5 TJ890-9748 112.00 89.991⁄4 1 3 TJ240-3020 113.00 89.995⁄16 1 2.5 TJ240-3021 102.00 79.993⁄8 1 1.75 TJ240-3022 102.00 79.993⁄8 1 2.5 TJ307-0770 102.00 79.991⁄2 1.75 1.75 TJ240-3025 102.00 79.991⁄2 1.25 2.62 TJ890-9749 102.00 79.991⁄2 1.25 4 TJ240-3026 112.00 84.991⁄2 1.25 6 TJ307-3353 132.00 104.995⁄8 1.75 1.75 TJ240-3027 102.00 79.995⁄8 1.5 2.75 TJ307-1737 102.00 79.993⁄4 1.75 1.75 TJ240-3028 102.00 79.993⁄4 1.75 3 TJ240-3029 102.00 79.993⁄4 1.75 3.5 TJ307-1738 102.00 79.993⁄4 1.75 6 TJ307-3354 125.00 99.991 2 1.75 TJ240-3030 113.00 89.991 2 3 TJ240-3031 113.00 89.991 2 4 TJ307-1739 105.00 89.9911⁄4 2.50 4 TJ307-1740 119.00 94.99

V-Flange End Mill HoldersCaterpillar #40

•Through-spindle coolant capability•End mill socket TIR .0002" or better to

insure best possible cutting tool life•Constructed of alloy steel for long, durable

service life • HRC 52-56•Bright taper with

black-oxide finish to prevent corrosion

•Meets ANSI specifications

$7999As Low As

$7999

SAVEUP TO

24%CAT V-FlangeCollet ChucksER Collet Series•Constructed of alloy steel for

long, durable service life•Hardened to RC 52-56

for long service life•Shiny taper with black-oxide

finish for the best combination of accuracy and durability

•Through-spindle coolant capability

Collet Collet Mfr's SaleSeries Size Proj. Model # List PriceCAT 40ER-16 .020-.433" 2.5" TJ308-0276 $191.00 $133.99ER-16 .020-.433 3 TJ308-0277 180.00 126.99ER-16 .020-.433 5 TJ308-0278 201.00 141.99ER-20 .039-.511 3 TJ308-0279 184.00 130.99ER-20 .039-.511 4 TJ308-0280 188.00 132.99ER-20 .039-.511 6 TJ307-0777 204.00 143.99ER-25 .039-.629 2 TJ308-0282 184.00 130.99ER-25 .039-.629 4 TJ308-0283 193.00 135.99ER-25 .039-.629 6 TJ308-0284 221.00 156.99ER-32 .078-.787 3 TJ308-0285 191.00 133.99ER-32 .078-.787 4 TJ308-0286 193.00 135.99ER-32 .078-.787 6 TJ308-0287 210.00 148.99ER-40 .118-1.181 4 TJ308-0288 193.00 135.99ER-40 .118-1.181 6 TJ308-0289 221.00 156.99CAT 50ER-16 .020-.433 4 TJ308-0290 203.00 145.99ER-16 .020-.433 6 TJ308-0291 215.00 154.99ER-20 .039-.511 4 TJ308-0292 217.00 156.99ER-20 .039-.511 6 TJ308-0293 235.00 168.99ER-20 .039-.511 8 TJ308-0294 261.00 187.99ER-25 .039-.629 4 TJ308-0295 221.00 158.99ER-25 .039-.629 6 TJ308-0296 238.00 171.99ER-32 .078-.787 4 TJ308-0297 224.00 159.99ER-32 .078-.787 6 TJ308-0298 240.00 172.99ER-40 .118-1.181 4 TJ308-0301 254.00 182.99ER-40 .118-1.181 6 TJ308-0300 280.00 201.99

SAVEUP TO

29%

•Wedge-type tool posts are precision engineered to ensure repetitive accuracy

•Interchangeable with Aloris•Oversized T-nut can be

machined to fit any size lathe6 Pc. Sets include 1 tool post and 5 holders:•Style 1: Boring and facing

on piston type, turning and facing on wedge type

•Style 2: Boring, turning and facing •Style 4: Boring, heavy-duty •Style 7: Universal parting blade•Style 10: Knurling, facing and turning

6 Pc. Quick Change Tool Post Sets

Lathe Piston Type Reg. Sale Wedge Type Reg. SaleSeries Swing Model # Price Price Model # Price Price100 9-12" TJ505-2253 $268.98 $145.95 TJ890-9636 $332.98 $179.95200 10-15 TJ505-2172 308.98 159.95 TJ890-9637 392.98 209.95300 13-18 TJ505-6543 388.98 209.95 TJ890-9638 515.98 289.95400 14-20 TJ505-2254 583.98 329.95 TJ890-9639 660.98 389.95

Wedge Type

SAVEUP TO

48%

$1459 5Starting At

$1459 5

Piston Type

22-23 EH 10-11 MTA Bkg_Layout 1 10/15/10 10:08 AM Page 2































































24


Head Criterion Reg. Sale Import Reg. SaleSize Cap. Shank Model # Price Price Model # Price PriceBoring Heads2" 1⁄2 — — TJ220-1500 $74.98 $45.953 3⁄4 — TJ505-2227 $410.98 $369.95 TJ220-1530 100.98 57.954 1 — — TJ220-1560 152.98 104.95Boring Head and Carbide Boring Bar Sets2 1⁄2 3⁄4" TJ307-1745 328.98 269.99 TJ307-1743 191.98 74.952 1⁄2 R8 TJ325-1452 320.98 279.95 TJ220-1502 197.98 74.953 3⁄4 1 TJ308-0625 433.72 419.95 TJ308-0621 122.94 98.953 3⁄4 R8 TJ325-1453 490.98 409.99 TJ220-1532 272.98 98.954 1 1 TJ308-0627 584.41 538.95 TJ308-0623 232.71 168.954 1 R8 TJ308-0626 612.43 599.99 TJ308-0622 238.57 168.95Boring Head and Cobalt Boring Bar Sets2 1⁄2 3⁄4 TJ307-1744 350.98 299.99 TJ307-1742 215.98 91.952 1⁄2 R8 TJ240-2905 391.98 329.95 TJ220-1501 112.98 91.953 3⁄4 1 TJ308-0628 538.02 499.99 TJ308-0624 268.39 198.953 3⁄4 R8 TJ307-0773 509.98 469.95 TJ890-9926 323.36 259.99

Boring Heads•A micrometer lead screw provides .001" direct reading

accuracy and ease of adjusting•Double bar holder permits a greater boring range

without an extreme offset condition2" Dia. Head•7⁄8" x 20 threaded back • 213⁄32" overall length, 1⁄2" boring

bar hole, 1⁄2" cross hole, offset 5⁄8"3" Dia. Head•11⁄2" x 18 threaded back • 35⁄32" overall length,

3⁄4" boring bar hole, 3⁄4" cross hole, offset 1"4" Dia. Head•11⁄2" x 18 threaded back • 33⁄4" overall length,

1" boring bar hole, 1" cross hole, offset 15⁄8"Boring Head and Carbide Boring Bar Sets:Boring head, shank and 9 pc. 1⁄2", 12 pc. 3⁄4" or 7 pc. 1" grade C6 carbide-tipped boring bar setBoring Head and Cobalt Boring Bar Sets:Boring head, shank and 10 pc. 1⁄2" or 14 pc. 3⁄4" cobalt boring bar setCriterion Sets: Supplied with Criterion shanks and Import boring bar sets

Boring Heads & Sets

SAVEUP TO

63%$7495Sets As Low As

$7495

5 x 6" Tilting Swivel Angle Table

•Heavy casting•0 to 90° graduations•2-screw lock setting•Precision made •41⁄2" overall height•Wt.: 12 lbs.

SAVE50%

Micro Drill Chuck

•Use with #80 to #60 wire gage drills•Grips drills firmly and accurately in

various sizes as small as a human hair•Can be held in any 1⁄8" or 3⁄16" collet or

larger adjustable drill chuck$479Sale PriceModel# TJ891-5837

$479Reg. Price$9.66

SAVE50%


$8995Reg. Price$180.98

3 Jaw Self-Centering Scroll Chucks

Front Mounting•Universal three-jaw

scroll lathe chucks with 2-piece hard reversible jaws with semi-steel body • Scroll and jaws hardened and ground

•Designed for use with rotary tables and other devices where back mounting chucks cannot be used

•Can be used with special back-plates for direct mounting on rotary tables

Chuck Thru Wt. Reg. SaleSize Hole Lbs. Model # Price PriceTwo Sets of Hard Solid Jaws4" 0.866" 7 TJ328-0959 $222.98 $179.008 2.559 34 TJ328-0967 274.98 208.00Two Pc. Hard Reversible Jaws5 1.181 11 TJ328-0957 307.98 265.006 1.575 18 TJ328-0986 334.98 279.008 2.559 31 TJ328-0987 392.98 325.0010 3.149 51 TJ328-0975 498.98 415.0012 3.937 101 TJ328-0978 717.98 605.00

SAVEUP TO

24%

HorizontalRotary TablesLow Profile

•Hardened and ground worm gear•10-second vernier reading •High-density Meehanite with ground

surface areas •Vernier plate permits direct reading to within

5 seconds•Adjustable dial on hand wheel reads directly

to each minute •Gear ratio

90:1, accuracy within 40 seconds

Wt. Reg. SaleSize Lbs. Model # Price Price6" 42 TJ200-1076 $272.98 $189.958 55 TJ200-1078 338.98 204.9510 82 TJ200-1080 382.98 232.9512 168 TJ200-1082* 665.98 389.95

SAVEUP TO

41%

*Truckshipment

$18995Starting At

$18995

5C Round Collet Sets Mfr's SaleSet Sizes Model # List PriceImport17 Pc. 1⁄16-11⁄16" x 16ths TJ230-4017 $84.74 $65.9518 Pc. 1⁄16-11⁄8 x 16ths TJ505-5021 119.98 62.9535 Pc. 1⁄16-11⁄8 x 32nds TJ890-8943 250.98 129.9565 Pc. 1⁄16-11⁄16 x 64ths TJ230-4064 259.85 229.95Lyndex18 Pc. 1⁄16-11⁄8 x 16ths TJ891-7037 403.00 249.9535 Pc. 1⁄16-11⁄8 x 32nds TJ240-2878 840.00 489.9565 Pc. 1⁄8-11⁄8 x 64ths TJ230-4066 1,657.00 899.9569 Pc. 1⁄8-11⁄8 x 64ths TJ510-2446 1,714.00 899.95

•Hardened and ground throughout•Outside thread: 1.240 x 20 R.H. •Inside thread: 1.047 x 24 R.H.

SAVEUP TO

48%

$6295Starting At

$629518 Pc. Set















































Machine Tool AccessoriesService – 800-USE-ENCO


Ultra Precision Drill Chucks3 Jaw, Keyless

•Super heavy-duty •Normal gripping power when hand

tightened • Doubles the torque when used with optional spanner wrench • Closer tolerances assure excellent runout accuracy • Suitable for CNC machining centers; will not loosen up with instant spindle stop and reverse

Open Closed Reg. SaleCapacity Mount Dia. L L Model # Price Price1⁄64-3⁄8" 2JTS 1.69" 3.19" 3.62" TJ319-3109 $75.98 $56.951⁄64-3⁄8 33JT 1.69 3.19 3.62 TJ319-3108 79.98 59.951⁄64-1⁄2 6JT 2.03 3.62 4.06 TJ319-3110 92.98 68.95

SAVE25%

$5695Starting At

$5695

• 60° included angle• For use in a drill chuck or collet• Hardened point is inserted into the center

of the tapping handle or tap center• The stroke of the center will follow the tap

as it threads the hole, assuring straight and accurate hand-tapped threads

• One size can be used for all standard tapping applications

• 1⁄2" shank • 3⁄8" spring travel

distance

Spring Center


$1698Reg. Price$21.95

Next Generation Drill Bit SharpenersSharpens Most Bits in Less Than 60 Seconds

•Works on 118° HSS, carbide-tipped masonry and TiN-coated bits •Works on drill sizes 3⁄32-1⁄2"•E-Z align system to assure correct sharpening alignment of even small bits•Quick-change diamond sharpening wheel, which lasts for several hundred sharpenings•Variable alignment to adjust chisel and relief angles • Restores and creates split points • Also works on carbide and cobalt drills •"Push-to-Stop" design prevents oversplitting the bit point •DD750X model can also create

custom points from 115° to 140°, accommodates drills up to 3⁄4"

•Storage case

SAVE29%

DD750X

•Holds all 5C collets • 4H x 5W x 33⁄4"L•Cam lever opens and closes collets to change quickly and easily•Can be adjusted without disturbing setup•Collet retains positive relation to base—does not move up or down

Horizontal & Vertical 5C Collet Fixture

SAVE40%$4599

Sale PriceModel# TJ235-6080

$4599Reg. Price$76.98

3" 4-Jaw Independent Lathe ChuckWith 5C Mount

•Semi-steel • Threaded end for positive end stop

•3⁄4" thru hole • Reversible hardened steel jaws

SAVE50%


$8249Reg. Price$164.98

Gray Iron Angle PlatesMachined or Precision Ground

•Made from high-tensile grained cast iron•Machined plates have a tolerance of .002"

in 6" and are recommended for generalmachine shop and setup work

•Precision ground plates have atolerance of .0005" in 6" and are recommended for close tolerance layout and inspection setups

•Parallelism: .005" in 6"•Squareness: .001" in 6"

$495

PrecisionWt. Machined Reg. Sale Ground Reg. Sale

Size Lbs. Model # Price Price Model # Price Price1 Rib Per Plate**2 x 2 x 2" 1 TJ418-4310 $7.39 $4.95 TJ418-4410 $13.07 $8.953 x 3 x 3 3 TJ418-4315 11.33 7.95 TJ418-4415 20.08 11.952 Ribs Per Plate**4 x 4 x 4 6 TJ418-4320 16.13 10.95 TJ418-4420 29.98 18.955 x 5 x 5 11 TJ418-4325 29.98 19.95 TJ418-4425 43.98 28.956 x 6 x 6 17 TJ418-4330 36.98 24.95 TJ418-4430 60.98 34.958 x 8 x 8 36 TJ418-4335 79.98 49.95 TJ418-4435 104.98 59.9510 x 10 x 10 62 TJ418-4340 102.98 78.95 TJ418-4440 184.98 116.9512 x 12 x 12 104 TJ418-4345* 169.98 126.95 TJ418-4445* 257.98 168.95

*Truck shipment **Number of ribs may vary

SAVEUP TO

42%Starting At

$495

Make Dull and Broken BitsWork Like New!

Sharpens Mfr's SaleMfr's # Drill Point Model # List PriceDD350 118° TJ893-1327 $75.25 $69.00DD500X 118 & 135° Split TJ368-7038 155.10 135.00DD750X 118 & 135° Split, 115-140° TJ368-7039 197.50 169.00

BONUS Diamond Wheel

& Carry Bag ($70 Value)

with Purchase of 500X & 750X!

Tilting SwivelAngle Table

•Heavy casting•0 to 90° graduations•2-screw lock setting•Precision made •8 x 10" table• 7⁄16" t-slot•61⁄2" overall height•Wt.: 62 lbs.


$13995Reg. Price$254.98

SAVE45%





























26


Bull Nose Live Centers

•For machining pipe andother hollow-shaped work

Morse Head Reg. SaleTaper Dia. OAL Model # Price Price2 2.49" 5.37" TJ251-4002 $53.98 $39.953 3.07 6.77 TJ251-4003 60.98 44.954 5.04 7.62 TJ251-4004 105.98 89.955 5.74 9.59 TJ251-4005 208.98 179.95

SAVEUP TO

26%$3995Starting At

$3995

SAVEUP TO

36%

Wizard® 411 Digital Readout SystemsFor Mills, Mill/Drills & LathesStandard features:•5.7" transmissive LCD•Sealed membrane keypad•Precision glass scales • Preset and zero reset•Absolute/incremental • Inch/metric•Multi-language supports, Help function•Feed rate display • Near-zero warning•4-function calculator (with trig)•16 tool offsets • Centerline calculation•Fixed reference marks • Job clock•Mills: Bolthole pattern calculations

with graphics • Lathes: Lock axis; instant radius/diameter conversion

•3-year, hassle-free warranty

Specifications• Error compensation: ±9,999 ppm

(linear and non-linear)• Resolution: Mills: .0002" X-Axis;

.0002" Y-Axis.Lathes: .0002" X-Axis; .0005" Y-Axis

• Die-cast metal construction• Operating temp.: 32 to 113°F• Electrical: 100-240v AC, 50/60 Hz

Mfr's SaleScale Travel Model # List PriceFor Mills2-Axis Models8 x 20" TJ319-9722 $1,302.00 $865.0010 x 24 TJ319-9723 1,302.00 882.0013 x 32 TJ319-9724 1,302.00 859.0013 x 35 TJ319-9725 1,302.00 859.0016 x 36 TJ319-9707 1,302.00 859.002-Axis Bridgeport13 x 35 TJ319-9721 1,302.00 859.003-Axis Quill Models13 x 32 x 4 TJ319-9713 1,688.00 1,114.0013 x 35 x 4 TJ319-9715 1,688.00 1,114.0016 x 36 x 4 TJ319-9717 1,688.00 1,114.003-Axis Knee Models13 x 32 x 16 TJ319-9714 1,781.00 1,175.0013 x 35 x 16 TJ319-9716 1,781.00 1,175.0016 x 36 x 16 TJ319-9718 1,781.00 1,175.00For Mill/Drills2-Axis Model8 x 18 TJ319-9708 1,302.00 865.0010 x 20 TJ319-9709 1,302.00 882.003-Axis Models8 x 18 x 4 TJ319-9719 1,410.00 1,141.0010 x 20 x 4 TJ319-9720 1,450.00 1,158.00

For LathesMfr's Sale

Scale Travel Model # List Price6 x 36" TJ319-9751 $1,648.00 $1,057.006 x 38 TJ319-9752 1,648.00 1,057.0012 x 40 TJ319-9710 1,674.00 1,064.0012 x 60 TJ319-9712 1,973.00 1,302.0012 x 78 TJ319-9711 2,245.00 1,555.00

$859Starting At

$859

Classic Keyless Drill ChucksHeavy-Duty Taper Mounted•“The World’s Most Accurate Keyless Drill Chuck” •Widely used today on the finest precision

drilling machinery where close tolerance drilling is essential

•Hardened alloy steel working parts •Use on high-accuracy drill presses, jig borers,

milling machines and production drilling equipment•Model 15J0 keyless drill chuck is especially designed for

holding small diameter twist drills and has a micrometer graduation to change the smallest drills

Mfr's Jacobs Mfr's Sale# Capacity Taper rpm Model # List Price15J0 0-1⁄16" 0 50,000 TJ290-1230 $269.00 $214.0030J0 0-1⁄8 0 35,000 TJ290-1235 218.00 173.0030J1 0-1⁄8 1 35,000 TJ290-1240 218.00 173.0050J1 0-3⁄16 1 25,000 TJ505-2198 220.00 175.0065J1 0-1⁄4 1 20,000 TJ290-1250 237.00 189.00100J33 0-3⁄8 33 12,000 TJ290-1255 269.00 214.00100J2 0-3⁄8 2 12,000 TJ290-1260 269.00 214.00130J33 1⁄32-1⁄2 33 7000 TJ290-1265 298.00 237.00130J2 1⁄32-1⁄2 2 7000 TJ290-1270 298.00 237.00130J6 1⁄32-1⁄2 6 7000 TJ290-1275 298.00 237.00160J6 1⁄8-5⁄8 6 4000 TJ290-1280 337.00 268.00

$173As Low As

$173

SAVE20%

Vertical 5CCollet Vise

•Uses any standard 5C collet for a capacity up to 1" round

•Small movement of level opens and closes collet

•Also accepts hex and square collets


$3595Reg. Price$60.98

• Change end mills, drills,collets and retention knobs quickly and securely

• Made from 6061anodized aluminum with steel key

• Four counterbored screw holes on base for mounting

• Can be assembled for horizontal or vertical use

• Adjustable handle, can be lifted and turned to any desired position

Tool Holding FixtureFor CAT 40 or BT 40 Toolholders


$6595Mfr’s List$77.98

SAVE15%








































Machine Tool AccessoriesOnline at use-enco.com


5C Collet BlockChucks & Sets

Features:•Made with square and hex bodies •Use for machining round, square, or hex

shaped parts or cross drilling at 60 or 90˚intervals

•Blocks are supplied with standard ring closer •Hardened/ground tool steel•Square/parallel to ±.0005" • 1⁄16 thru 11⁄8"22 Pc. Collet Block Chuck & 5C Collet Set•1.47 x 24 drawbar thread •115⁄32" face diameter • 39⁄32" body lengthIncludes:•3 collet

block chucks •18 pc. 5C

collets 1⁄16-11⁄8" •(1) 72 pc.

collet rack

Reg. SaleDescription Model # Price PriceSquare, with standard closer TJ891-6015 $26.98 $19.95Hex, with standard closer TJ891-6016 26.98 19.95Quick-acting lever collet closer TJ891-6017 16.07 10.95Complete set of all three TJ235-7050 57.98 40.95

$1239522 Pc. Set Sale PriceModel# TJ319-2827

$12395Reg. Price$184.98

Set of Block Chucks(Collets Not Included)

5C Collet Block Chucks

•Direct power transmission gear and scrollfor accurate, vibration-free work

•Hardened and precision-ground bodiesand jaws

Key-Type Drill Chucks

Mount/Thread Key Mfr's Sale

Capacity Size Size Model # List Price1⁄64-1⁄4" 1JT S8 TJ325-1499 $29.50 $24.991⁄32-3⁄8 3⁄8"-24 S8 TJ325-1500 34.00 28.991⁄16-1⁄2 1⁄2"-20 S9 TJ325-1535 43.50 35.991⁄32-3⁄8 2JT S9 TJ325-1501 40.00 33.991⁄16-1⁄2 6JT S9 TJ325-1502 43.50 35.991⁄16-1⁄2 3⁄8"-24 S9 TJ325-1503 43.50 35.991⁄16-1⁄2 5⁄8"-16 S9 TJ325-1504 43.50 35.991⁄16-1⁄2 33JT S9 TJ325-1537 43.50 35.991⁄16-1⁄2 2JT S9 TJ325-1536 42.00 34.991⁄8-5⁄8 5⁄8"-16 S10 TJ325-1529 54.00 44.991⁄32-5⁄8 3JT S10 TJ325-1505 63.00 52.993⁄16-3⁄4 3JT S13 TJ325-1506 102.00 85.99

Made inGermany!

$2499Starting At

$2499

SAVEUP TO

17%

Horizontal/Vertical Rotary Tables & Sets•Cut gears, bolthole patterns, intersecting slots and curved

slots precisely • Adjustable dial on the hand wheel readsdirectly to each minute • Vernier plate permits direct reading to within 5 seconds

•High-density Meehanite with ground surface areas ensuressmooth rotation • Hardened and ground worm gear

•10-second vernier reading • Gear ratio 90:1, accuracy

within 40 seconds •Sets include tailstock and

dividing plates

Tailstock

DividingPlateWt. Table Only Reg. Sale Wt. Table Set Reg. Sale

Size Lbs. Model # Price Price Lbs. Model # Price Price8" 95 TJ200-1143 $398.98 $299.95 119 TJ200-1144 $442.98 $395.9510 137 TJ200-1153 520.98 359.95 157 TJ200-1154 540.98 444.9512 250 TJ200-1163 755.98 549.95 255 TJ200-1164 712.98 598.95

SAVEUP TO

30%

$29995Starting At

$29995

•Slots arranged for maximum clamping versatility

•Webbed end • High-tensile, cast-iron construction

Machined square & parallel on outside faces & ends

Slotted Angle Plates

SAVEUP TO

68%$499As Low As

$499

Reg. SaleW L H Model # Price Price3" 21⁄2" 2" TJ418-4510 $12.65 $4.9931⁄2 3 21⁄2 TJ418-4515 15.26 5.9941⁄2 31⁄2 3 TJ418-4520 18.32 6.996 5 41⁄2 TJ418-4525 27.98 9.997 51⁄2 41⁄2 TJ418-4530 33.98 12.998 6 5 TJ418-4535 44.98 15.999 7 6 TJ418-4540 62.98 20.9910 8 6 TJ418-4545 79.98 24.9912 9 8 TJ418-4550 89.98 45.999 16 12 TJ418-4916 239.98 185.99

5C Spin Indexer (Jig)•Designed to extend the work capabilities of surface grinders,

drill presses and all types of milling machines•Accepts 5C collets to 11⁄8" capacity•Indexing plate with precise 36-hole pattern•10 vernier holes for 1° indexing•Spindle travels 21⁄16"

for flute grinding•Hardened and ground

spindle with lock•2-year guarantee

TolerancesDividing spindle concentricity .0004"Cylindrical center bore (per 1") concentricity .0012Spindle center line parallelism to base .0008


$5995Reg. Price$99.98

SAVE40%

•Front-mounted ratchet control for rapidindexing • Single-lever operated collet closerwith 100:1 leverage ratio

•Spindle manufactured with tapered seat in body frame

•24-space indexing plate •2-year manufacturer's

warranty

Horizontal/Vertical 5C Collet Indexer


$18995Reg. Price$255.98

Max. VariationDividing Spindle Concentricity: .0002"Cylindrical Center Bore (per 1"): .0008"Spindle Centerline Parallelism: .0008"Base to Face Squareness: .0008"Center Slot to Dividing Spindle Concentricity: .0008"Lateral Offset of Center Slot ofDividing Spindle: .0008"

Specifications

SAVE25%







































28

Dial per rev.: .100" Travel: 8" longitudinal T-slots: 5⁄8", 21⁄2" on center 5" crossTransverse: 5" Ht.: 41⁄2"Base: 8 x 9" oval w/U-slots Table: 51⁄2 x 12"

for up to 5⁄8" bolts Wt.: 36 lbs.

Specifications

Compound Slide Milling& Drilling Table•Heavy-duty rugged slide for positioning,

milling, drilling, microscope viewing and staging

•Adjustable gibs for heavy loads


$8995Reg. Price$193.98

SAVE53%

Carbon Steel BearingMorse Hardened & Ground Reg. Sale Steel Reg. SaleTaper OAL Model # Price Price Model# Price Price1 35⁄16" TJ251-3061 $3.63 $3.39 TJ251-3041 $10.26 $7.992 43⁄16 TJ251-3062 5.29 4.69 TJ251-3042 11.63 9.993 415⁄16 TJ251-3063 6.18 5.49 TJ251-3043 16.28 13.994 65⁄16 TJ251-3064 8.93 7.99 TJ251-3044 24.21 19.995 81⁄2 TJ251-3065 21.74 15.99 TJ251-3045* 43.98 39.99

SAVEUP TO

26%

Morse Taper Solid Dead CentersBearing Steel or Carbon Steel

With 60˚ Included Angle•Precision hardened and ground to closest tolerance

$339As Low As

$339*OAL is 77⁄8"

3 & 4" Diameter 5C Mount 3-JawSelf-Centering Chucks

Precision chucks eliminate having to tear down a setup on a lathe toswitch to a 3- or 4-jaw chuck when working with a diameter that 5Cor MT spindles aren't readily available for.

SAVEUP TO

50%

Standard Accessories•1 chuck key•2 sets of hardened steel jaws; 1 set of

internal holding and 1 set of externalholding jaws for increased clamping range

Chuck T.I.R. Wt. Reg. SaleDia. Repeatability Lbs. Model # Price Price3" .003" 6.7 TJ890-8833 $137.98 $82.954 .003 10.4 TJ890-8834 166.98 82.95

$8295Your Choice Only

$8295

•For exacting production line and heavy-duty use

•Hardened and ground •The greater the load it

grips the tighter it becomes

•Easily tightened and locked by hand

Ultra-PrecisionKeyless Chucks

Jacobs Series Reg. SaleCapacity Back Taper Model # Price Price0-5⁄16" 1 TJ290-1137 $57.98 $33.950-3⁄8 2 TJ290-1142 60.98 41.950-3⁄8 33 TJ290-1147 60.98 41.950-1⁄2 6 TJ290-1162 62.98 44.950-1⁄2 33 TJ290-1152 62.98 43.951⁄8-5⁄8 6 TJ290-1167 79.98 53.95

$3395As Low As

$3395

SAVEUP TO

41%

Live CentersTriple Bearing Live Centers With 60º Included Angle

•Dust-, chip- and oil-proof mechanism with labyrinth packing and special oil seal

•Seal has a running-in period of approximately 250 hours, during which time heating may be noticed—this is not detrimental to the center and will not occur when the seal has been run-in

•Center is fitted with pre-loaded taper roller bearings

Morse Outside Point Load Reg. SaleTaper Dia. Dia. OAL Cap. Lbs. Model # Price Price1 1.339" .669" 4.528" 200 TJ328-0158 $56.98 $53.952 1.457 .866 4.921 600 TJ328-0159 81.98 77.953 1.850 1.181 6.417 900 TJ328-0160 100.98 95.954 2.165 1.378 7.598 1800 TJ328-0161 122.98 115.955 2.756 1.772 9.449 3000 TJ328-0162 178.98 168.956 3.544 2.362 12.598 7500 TJ328-0163 279.98 264.95

With 8 Interchangeable Points•The rotating spindle is extended right through

the tapered shank•Two specially designed adjustable needle-roller

bearings carry all radial loads•A heavy-duty, ball-thrust bearing takes all axial thrust•Points are easily interchangeable•Complete protection of bearing from the ingress of

coolant, dirt or swarf is provided by the built-in oil seal,which also prevents loss of lubricant

•Set consists of main body and eight different style points as shown

CNC Triple Bearing Extended Point Live Centers With 60º Included Angle•Hardened and ground to

61-65 Rockwell •Concentricity within .0002"

Heavy-Duty Live Center Sets

Morse Reg. SaleTaper Model # Price Price3 TJ328-0168 $377.98 $357.954 TJ328-0169 432.98 410.955 TJ328-0170 643.98 611.95

Morse Reg. SaleTaper Model # Price Price2 TJ328-0164 $103.98 $97.953 TJ328-0165 110.98 104.954 TJ328-0166 147.98 139.955 TJ328-0167 187.98 177.95

Easy, Secure Shopping

28-29 EH 10-11 MTA-Books_Layout 1 10/15/10 10:09 AM Page 1


































Blueprint Reading Basics, By Warren Hammer 2001, 336 pp., illus., 3rd Edition.Written in a non-technical and easy-to-understand manner, this practical guide combines blueprint reading theory with industry applications. This source provides an introduction, a detailed review of a specific topic, illustrations, exercise, and review questions within each chapter. No technical background is required to understand this subject.

Pocket Ref, By Thomas J. Glover 2003, 768 pp., 3rd Edition.This amazing book is like a set of encyclopedias in your shirt pocket.Contains hundreds of tables, maps, formulas, constants, conversions, andcharts for engineers, foremen, contractors,machinists, purchasing agents and maintenance persons.

Reg. SaleBook Title Model # Price PriceBlueprint Reading Basics TJ205-1022 $28.98 $21.95Machine Shop Practice Vol. I TJ205-1005 26.98 19.95Machine Shop Practice Vol. II TJ205-1006 26.98 19.95Engineer's Black Book TJ308-0511 24.95 19.95The Starrett Book for Student Machinists TJ422-1362 14.36 11.95Shop Reference for Students and Apprentices TJ505-3550 24.26 19.95Machine Shop Training Course Vol. I TJ505-3535 22.46 17.95Machine Shop Training Course Vol. II TJ505-3536 22.46 18.99Fastener Black Book TJ328-0099 26.98 19.95Metalworking Sink or Swim:Tips and Tricks for Machinists, Welders,and Fabricators TJ328-0098 39.98 35.95The Home Machinist's Handbook TJ368-7056 24.95 18.99Pocket Ref TJ325-5186 12.84 9.99

Machine Shop PracticeBy Karl Hans Moltrecht, 1981, illus., 2nd Edition.Covers everything the apprentice or on-the-job professionalneeds to know about the intelligent and efficient operationof machine tools.

Engineer's Black BookBy Pat Rapp, 2005, 168 pp., illus.This easy-to-use Engineering Pocket reference book contains a wealth of up-to-date, useful, practical and hard-to-find information on screw threads, tapping sizes, tapers, cuttingtools, speeds and feeds, tungsten carbide, keys and keyways,drill sharpening, bolts and nuts, plastics, adhesives, grindingwheels, G-codes, weights of metals, and much more!Features include:•All color pages•Inch dimensions with metric equivalents•Tables, tolerances, standards and tolerances•Conversion factors, equivalent charts•Includes a Free drill-point-metal sharpening gage

The Starrett Book for Student Machinists1998, 159 pp., illus., 17th Edition.This familiar handbook for machine shop beginners is written in clear and simple language.

Shop Reference for Students and ApprenticesBy Edward G. Hoffman and Christopher J. McCauley 2001, 544 pp., illus., 2nd Edition.From the ability to understand and use shop mathematics to the reading and interpreting of shop drawings, the editor'sintent is to provide the information and the know-how that students will need.

Machine Shop Training CourseBy Franklin D. Jones, 1964, 5th Edition, illus.These books present an outstanding treatise on machine shoppractice that includes fundamental principles and methods ofadjusting and using different types of machine tools, typical shop problems with solutions, miscellaneous facts relating to the art of machine construction and much more.

Fastener Black BookBy Pat Rapp, 2008, 248 pp., illus.The Fastener Black Book is a comprehensive yet practical pocket book containing information on the vast array of fasteners. It covers steel, stainless steel, aluminum, nonferrous, plastic fasteners and self-drilling and tapping screws.Features include:•Inch/metric fasteners•ISO and DIN Specifications•Standard grades, tolerances and markings•Pre-load and tightening torques•Thread forms, heads, points, materials and coatings•Easy fastener identification

Metalworking Sink or Swim: Tips and Tricks for Machinists, Welders, and FabricatorsBy Tom Lipton, 2008, 300 pp., illus.This collection of priceless tips, tricks, skills, and experiences from a veteran of the trade is presented in a way that captures the attention of users and engages them in the process of furthering the art.

The Home Machinist's HandbookBy Doug Briney, 1984, 275 pp. Here's everything the do-it-yourselfer needs to set up and operate a handyman's machine shop. Areas covered range from shop requirements and proper lighting to buying, using and storing tools. Ideal for the hobbyist, home handyman, and inventor. This book shows you how to work with basic hand tools and how to read shop drawings.

Machinist's Books

Books & Reference

For accuracy, always use the entire Enco model #from this catalog when ordering by phone or online.

29


Machinery's Handbook 28th Edition

Mfr's SaleDescription Model # List PriceToolbox Handbook TJ319-9778 $94.95 $69.95Large Print Handbook TJ319-9779 115.95 85.99CD-ROM TJ319-9782 94.95 67.99CD & Toolbox Handbook Set TJ319-9780 164.95 117.99CD & Large Print Handbook Set TJ319-9781 181.95 132.99Handbook Guide TJ319-9783 15.50 10.49

SAVEUP TO

32%By Oberg, Jones, Horton, Ryffel, Green and McCauley. Thoroughly Revised•All standards have been updated•All sections have been updated and revised

$6995As Low As

$6995

28-29 EH 10-11 MTA-Books_Layout 1 10/15/10 10:09 AM Page 2




















Mills

30

Ask The Enco Tech Team to help

TJ890-9190 shown

Specifications 9" x 42"/9" x 49" 10" x 54"

Speeds: 80-4800 rpm - Step Pulley 78-4200 rpm60-4200 rpm - Variable Speed

Longitudinal Travel: 30" - Step Pulley 38.5"35" - Variable Speed

Saddle Cross Travel: 13.5" 17"Knee Travel: 16" 17.5"Spindle/Quill Travel: 5" 5.1"Spindle to Column: 5.5-20" 4.5-20"Ram Travel: 14.5" 19"Motor & Electrics: 2 hp, 220v, 3 ph. 3 hp, 220/400v, 3 ph.Machine Dimensions: 85 x 71 x 74" 841⁄2 x 72 x 75"

9" x 42", 9" x 49" & 10" x 54" Vertical Mills

•Head tilts 90° right/left, 45° forward/back • Precision Y-axis, leadscrew-bearinghub with a maximum .005" deviation to Y-axis centerline, giving fluid in/outmotion to the saddle

•Precision squareness of table surface to the guideway; .00078"/12" travel •Turret swivels 360° • Parallelism of table surface to longitudinal movement;

.00078"/12" travel • R8 spindle taper • 3 T-slots: 5⁄8" • 3.375" spindle dia.•3 spindle feeds: .0015, .003, .006" • 0-18" spindle to table•Backlash adjustment • One-shot lubrication to table and saddle; gravity feed

lubricator for spindle • Drawbar and tool kit • 3-year warranty on DRO

$4,39595Starting At

$4,39595

SAVEUP TO

$1,5611-Year

Limited Warranty

Wt. Reg. SaleSize Lbs. Model # Price PriceMill Only9 x 42" Step Pulley 2,400 TJ100-1527 $4,996.98 $4,395.959 x 49" Variable Speed 2,650 TJ100-1599 5,896.98 4,995.9510 x 54" Variable Speed 2,840 TJ100-1588 7,096.98 5,995.95Mill with Enco 150 in./lbs. Torque Power Table Feed and Anilam® 2-Axis DRO System Installed9 x 42" Step Pulley 2,435 TJ890-9181 6,596.98 5,595.959 x 49" Variable Speed 2,690 TJ890-9190 7,496.98 6,195.9510 x 54" Variable Speed 2,836 TJ890-9196 8,696.98 7,195.95Mill with Enco 150 in./lbs. Torque Power Table Feed and Anilam® 3-Axis (Quill) DRO System Installed9 x 42" Step Pulley 2,440 TJ890-9182 6,956.98 5,895.959 x 49" Variable Speed 2,695 TJ890-9191 7,856.98 6,495.9510 x 54" Variable Speed 2,891 TJ890-9197 9,056.98 7,495.95Mill with Enco 150 in./lbs. Torque Power Table Feed and Anilam® Wizard® 411 3-Axis (Knee) DRO System9 x 42" Step Pulley 2,440 TJ890-9183 7,041.98 5,995.959 x 49" Variable Speed 2,695 TJ890-9192 7,941.98 6,595.9510 x 54" Variable Speed 2,891 TJ890-9198 9,146.98 7,595.95

9" x 49" & 10" x 54" Variable Speed Vertical Mills•Certified Meehanite casting stress relieved to

provide a rigid machine structure•Way covers for knee and crossfeed •Precision-hardened and ground table and ways•Dynamically balanced head for quiet,

trouble-free operation•One-shot lubrication and solid quill feed •Head tilts 90° R/L, 45° forward/back•U.S. patented ram locking system •Turret swivels 360° •Hand-scraped turret column ways•Dovetail ways (9" x 49"); Square ways (10" x 54")•Upper and lower surface of saddle laminated with Turcite-B

for smooth, accurate and wear-resistant surfaces•3-year warranty on DRO

$5,99595Starting At

$5,99595

Reg. SaleDescription Model # Price Price6" Riser for 9 x 49" TJ326-1830 $549.98 $499.956" Riser for 10 x 54" TJ326-1829 549.98 499.958" Riser for 10 x 54" TJ326-1825 574.98 524.95Kurt® Power Drawbar TJ326-1824 979.98 849.95

Installed AccessoriesSAVEUP TO

$1,810

Specifications 9" x 49" 10" x 54"

Variable Speed: 70-4200 rpm 70-4200 rpmLongitudinal Travel: 35" w/o Power Feed 39" w/o Power Feed3 T-Slots: 5⁄8" x 11⁄4 5⁄8" x 11⁄4Saddle Cross Travel: 12" 16.5"Knee Travel: 161⁄2" 17 3⁄4"Spindle/Quill Travel: 5" 5"Spindle Taper: R8 R8Spindle Diameter: 3.375" 3.375"3 Spindle Feeds (Inch/Rev.): .0015, .003, .006" .0015, .003, .006"Spindle to Table: 0-18 5⁄16" 0-20"Spindle to Column: 5-20" 7-26"Head Swivel, w/Locks RH/LH: 90°/90° 90°/90°Head Tilt-Forward & Back: 45°/45° 45°/45°Ram Turret Swivel: 360° 360°Ram Travel: 12" 18"Motor & Electrics: 3 hp, 220/440v, 3 ph. 3 hp, 220/440v, 3 ph.Machine Dimensions: 85H x 59W x 55"L 88H x 72W x 66"LMachine Base Dimensions: 371⁄2 x 24" 43 x 24"Floor Space Required (Max.): 140W x 70"D 150W x 94"D

Wt. Reg. SaleDescription Lbs. Model # Price PriceMill Only9 x 49" 2,227 TJ307-3678 $6,896.98 $5,995.9510 x 54" 3,400 TJ890-9988 8,596.98 7,999.95Mill with Power Table Feed and Anilam® 2-Axis DRO9 x 49" 2,246 TJ307-3689 8,878.98 7,494.9510 x 54" 3,440 TJ307-3691 10,576.98 8,994.95Mill with Power Table Feed and Anilam® 3-Axis (Quill) DRO9 x 49" 2,251 TJ307-3690 9,349.98 7,539.9510 x 54" 3,445 TJ307-3692 11,049.98 9,639.95Mill with Power Table Feed and Anilam® 3-Axis (Knee) DRO9 x 49" 2,251 TJ619-2896 9,441.98 7,795.9510 x 54" 3,445 TJ619-2895 11,142.98 9,694.95

1 year limited warranty!

30-31 EH 10-11 Mills/MillDrills_Layout 1 10/15/10 10:10 AM Page 1


























you select the Right Machine!


Mills/Drills

1-Year Limited Warranty

•Forward and reversing switch for tapping •360° head swivel•3-year warranty on DRO

163⁄8" Mill/Drills

$1,29595Starting At

$1,29595

Wt. Reg. SaleDescription Lbs. Model # Price PriceMill/Drill Onlyw/o Power Downfeed 645 TJ105-1110 $1,398.98 $1,295.95w/Power Downfeed 690 TJ105-1300 1,896.98 1,735.95Mill/Drill with Cabinet Stand with Chip Panw/o Power Downfeed 725 TJ105-1108 1,688.98 1,559.95w/Power Downfeed 775 TJ105-1298 2,186.98 1,895.95Mill/Drill with 2-Axis Anilam® DRO, Enco Power Table Feed, Cabinet Standw/o Power Downfeed 765 TJ240-7152 3,288.98 2,785.95w/Power Downfeed 785 TJ240-7154 3,786.98 3,227.95Mill/Drill with 3-Axis Anilam® DRO, Enco Power Table Feed and Cabinet Stand with Chip Panw/o Power Downfeed 765 TJ240-7155 3,678.98 3,099.95w/Power Downfeed 818 TJ240-7157 4,176.98 3,574.95

• Drill Chuck with Key• Drill Chuck Arbor • 52 Pc. Clamping Kit• Shell Mill Arbor • Angle Drill Press Vise• Face Mill

TJ240-7152 shown

12 Speeds

Standard Equipment

Specifications

Speeds: 150-3000 rpmSwing: 163⁄8"Long. Table Travel: 17" Table Work Surface Area: 8 1⁄4 x 281⁄2"Cross Table Travel: 71⁄4"Capacity:

Drilling Steel: 11⁄4"Drilling Cast Iron: 11⁄2" End Mill/Face Mill: 3⁄4" / 3"

4 T-Slots: 5⁄8"Spindle/Quill Travel: 5"*Spindle Taper: R8Spindle to Table (Max.): 18"Spindle to Column (Max.): 65⁄8"Spindle/Quill Dia.: 3"Motor & Electrics: 11⁄2 hp, 110/220v, 1 ph.Machine Dimensions: 431⁄2H x 38W x 36"DFloor Space (Max.): 62W x 50"D

* 4" with power downfeed

SAVEUP TO

$602

TJ307-3237 shown

$1,65995As Low As

$1,65995

SAVEUP TO

$502

20" Geared-Head SquareColumn Mill/Drills

•Massive 3" diameter quill•Tilting head•Square column w/dovetail ways•Quick spindle changes with

quick-select gearshift•3-year warranty on DRO

Wt. Reg. SaleLbs. Model # Price PriceMill/Drill Only750 TJ325-5184 $1,999.98 $1,659.95Mill/Drill with Cabinet Stand810 TJ307-2792 2,289.98 1,829.95Mill/Drill with 2-Axis Anilam® DRO, Enco Power Table Feed,Cabinet Stand850 TJ307-3237 3,897.98 3,395.95

Specifications

Swing: 20"Table Work Surface Area: 321⁄4 x 91⁄2"6 Spindle Speeds: 120, 210, 345, 670,

1180, 1970 rpmDrilling Capacity:

Mild Steel: 19⁄16"Cast Iron: 13⁄4"End Mill: 11⁄8"Face Mill: 31⁄8"

Longitudinal Table Travel: 215⁄8"Cross Table Travel: 71⁄2"4 T-Slots: 1⁄2"Head Tilt: 90° L/RSpindle Taper: R8Spindle Quill Dia.: 3"Spindle to Table (Max.): 183⁄4"Motor & Electrics: 11⁄2 hp, 220/110v

Wired to 220v, 1 ph.Machine Dimensions: 57H x 421⁄2W x 28"D

Standard Equipment

• Face Mill w/Arbor• Drill Chuck Arbor • Drill Chuck & Key• 3" Angle Vise Kit

30-31 EH 10-11 Mills/MillDrills_Layout 1 10/15/10 10:10 AM Page 2














Lathes

32

Machinery Manuals


•Hardened and ground bedwith reinforced cross ribs

•Headstock with tapered roller bearings

•Thread chasing dial•Easy speed changes•Splash lubrication in headstock•Removable gap block•Electromagnetic starter switch•3-year warranty DROs

18 Speeds, 60 to 1550 rpm

Standard Equipment

• 6" 3-Jaw Chuck • 7" 4-Jaw Chuck• Steady Rest • Follow Rest • 10" Faceplate • Chip Pan

Specifications

Swing Over Bed: 12"Swing Over Gap: 17"Length of Gap: 9"Swing Over Cross Slide: 71⁄2"Swing Over Compound: 3"Distance Bet. Travel Centers: 36"Carriage Travel: 30"Long. Feed Range (In./Rev.): .0011-.0311"40 Inch Threads: 4-112 tpi29 Metric Threads: .24-4.5mmCross-Slide Travel: 61⁄2"Cross-Slide Feed Range: .0015-.0302"Compound Travel: 25⁄8"Tailstock Spindle Travel: 35⁄8"Tailstock Taper: 3 MTSpindle Nose Mounting: D1-4Spindle Bore Dia.: 11⁄2"Spindle Taper: 5 MT (w/sleeve, 3 MT)18 Spindle Speeds: 60-1550 rpmMotor & Electrics: 11⁄2 hp, 110/220v, 1ph.Machine Dimensions: 22H x 26W x 60"LFloor Space (Max.): 30W x 70"L

12" x 36" Geared Head Gap Bed Bench Lathes

Wt. Reg. SaleLbs. Model # Price PriceBench Lathe Only1,050 TJ510-2584 $3,096.98 $2,476.95Lathe with Cabinet Stand1,250 TJ510-2589 3,396.98 2,716.95Lathe with Cabinet Stand Plus Anilam®

2-Axis DRO Installed1,285 TJ510-2590 4,796.98 3,836.95

SAVE20%

• 3 MT Dead Center • 11⁄16" Capacity

4-Way Tool Post • Metric Change Gears• Threading Dial • Toolbox with Tools

$2,47695Starting At

$2,47695

Specifications 13" x 40" 14" x 40"

Swing Over Bed: 13" 14"Swing Over Gap: 19" 20"Length of Gap: 93⁄8" 93⁄8"Swing Over Cross Slide: 71⁄2" 81⁄2"Swing Over Compound: 31⁄2" 31⁄2"Carriage Travel: 371⁄4" 371⁄4"Long. Feed Range (In./Rev.): .0012-.0294" .0012-.0294"40 Inch Threads: 4-112 tpi 4-112 tpi22 Metric Threads: .45-7.5mm .45-7.5mmCross-Slide Travel: 6" 6"Cross-Slide Feed Range: .0003-.0100" .0003-.0100"Compound Travel: 31⁄2" 31⁄2"Tailstock Spindle Travel: 43⁄4" 43⁄4"Tailstock Taper: 3 MT 3 MTSpindle Nose Mounting: D1-4 D1-4Spindle Bore Dia.: 17⁄16" 17⁄16"Spindle Taper: 5 MT 5 MTMotor & Electrics: 3 hp, 220v 3 hp, 220v, 3 ph.Machine Dimensions: 713⁄4L x 31W x 455⁄8"H 713⁄4L x 31W x 491⁄8"H

13" x 40" & 14" x 40" Geared Head Gap Bed Engine Lathes8 Speeds, 90 to 1800 rpm

•Jog button for easy gear engagement and spindle inching

•Quick speed changes•Splash lubrication in headstock •Totally enclosed gearbox•Hardened and ground bedways•Spindle with tapered roller bearings•3-year warranty on DRO

Shown with DRO


Standard Equipment

• 4-Way Tool Post • Backplate• Steady and Follow Rests• Chip Pan • Faceplate • Coolant System • Live and Dead Centers • Foot Brake • Splashguard • 6" 3-Jaw and 8" 4-Jaw Chucks (13 x 40”)• 8" 3-Jaw and 10" 4-Jaw Chucks (14 x 40”)

Wt. Reg. SaleLbs. Model # Price Price13" x 40" Engine Lathe Only1,808 TJ319-9733 $4,624.98 $3,995.0013" x 40" Lathe With Anilam Wizard® 411 2-AxisDRO Installed1,976 TJ319-9734 6,096.98 5,059.0014" x 40" Engine Lathe Only1,940 TJ308-0232 5,296.98 4,295.0014" x 40" Engine Lathe with Anilam Wizard®

411 2-Axis DRO Installed1,976 TJ308-0235 6,787.98 5,359.00

SAVEUP TO

$1,428

$3,995Starting At

$3,995

32-33 EH 10-11 Lathes_Layout 1 10/15/10 10:10 AM Page 1








online at use-enco.com


Lathes

Quick-change gearbox for easier threading

•Headstock with tapered roller bearings•Hardened and ground ways •Reversing switch•Inch dials •Reinforced cross ribs

*Lathe is prewired for 110v, but can be wired for 220v

Wt. Reg. SaleLbs. Model # Price PriceBench Lathe Only250 TJ893-1273 $1,029.98 $929.95Bench Lathe with Cabinet Stand328 TJ308-0338 1,297.98 1,129.95

Specifications

Swing Over Bed: 9" Swing Over Cross Slide: 51⁄4"Distance Between Centers: 20" Carriage Travel: 16" longitudinal, 41⁄2" cross2 Longitudinal Feeds: .005, .007" 27 Inch Threads: 8-56 tpi11 Metric Threads: .5-3mm Tailstock Spindle Travel: 1.57" (40mm)Compound Travel: 2" Tailstock Taper: 2 MTSpindle Taper: 3 MT Spindle Bore Dia.: .787" (20mm)Motor & Electrics: 3⁄4 hp, 110v*, 1 ph. 6 Spindle Speeds: 130-2000 rpmMachine Dimensions: 38L x 181⁄2W x 16"H Spindle Nose Mounting: 11⁄2-8"

9" x 20" Bench Lathes

• 4" 3-Jaw Chuck • 5" 4-Jaw Chuck • Steady Rest• Follow Rest • Metric Change Gears • 7" Faceplate• 2 MT Dead Center • Threading Dial • Toolbox with Tools • 1⁄2" Capacity, 4-Way Tool Post

Standard Equipment

$92995Starting At

$92995


SAVEUP TO

$168

•Precision bearings ensure high spindle concentricity •Milling unit has swivel head • Model TJ328-1308 includes: 4" 3-jaw chuck,

1⁄2" drill chuck with arbor, 2 dead centers, 4-way tool post, 5" backplate, 91⁄2" face-plate, 3 MT chuck arbor, drill chuck arbor, drawbar and change gears

•Models TJ328-1309 & TJ328-1310 include: 3-jaw chuck, drill chuck arbor, drawbar, change gears, centers and wrenches

•7 turning speeds: 160-1360 rpm • 3 MT spindle taper • ±180° swiveling angle of headstock for milling and drilling • 3⁄4 hp, 110v, 1 ph., 1400 rpm motor

3 MT Drawbar Accessories

Description Model# PriceEnd Mill Holders3⁄8" Hole Dia. TJ368-7022 $24.951⁄2" Hole Dia. TJ368-7023 24.955⁄8" Hole Dia. TJ368-7024 24.95Drill Chuck Arbors3 MT to 1JT TJ368-7025 9.453 MT to 1JT TJ368-7026 9.453 MT to 33JT TJ368-7027 9.45

$1,119Starting At

$1,119

Specifications TJ328-1308 TJ328-1309 TJ328-1310

TURNINGSwing Over Bed: 161⁄2" 161⁄2" 161⁄2"Distance Between Centers: 153⁄4" 193⁄4" 311⁄2"Max. Longitudinal Travel: 15" 173⁄8" 291⁄8"Max. Cross Travel: 43⁄4" 77⁄8" 77⁄8"Spindle Taper: 3 MT 4 MT 4 MTSpindle Hole: 3⁄4" 11⁄8" 11⁄8"Metric Threads: (8) .75-3mm (12) .75-6mm (12) .75-6mmInch Threads: (31) 8-20 tpi (36) 4-120 tpi (36) 4-120 tpiLongitudinal Range of Automatic Feeding: .002-.007" .002-.014" .002-.014"MILLING & DRILLINGTable Size: 77⁄8L x 57⁄8"W 183⁄4L x 65⁄16"W 183⁄4L x 65⁄16"WSpindle Travel: 321⁄64" 421⁄64" 421⁄64"Spindle Speeds: (14) 117-1300 rpm (16) 120-3000 rpm (16) 120-3000 rpmDrilling Capacity: 19⁄32" 7⁄8" 7⁄8"End Mill Capacity: 3⁄4" 11⁄8" 11⁄8"Face Mill Capacity: 21⁄2" 31⁄8" 31⁄8"Machine Dimensions: 38.2W x 23D x 38"H 57.5W x 23D x 38"H 69.25W x 23D x 38"HApprox. Wt.: 400 lbs. 540 lbs. 606 lbs.Reg. Price $1,244.98 $1,749.98 $2,199.98Sale Price $1,119.00 $1,574.00 $1,979.00

SAVE10%

3-in-1 Mill-Lathe-Drill Press Machine


32-33 EH 10-11 Lathes_Layout 1 10/15/10 10:10 AM Page 2
















Lathes

34

Conserve Your Cash! Ask us about

Wt. Reg. SaleDescription Lbs. Model # Price PriceBench Lathe Only 1,100 TJ328-6153 $4,822.98 $3,859.00Bench Lathe with Cabinet Stand 1,270 TJ328-6135 5,142.98 4,115.00Bench Lathe with Anilam Wizard® 550 2-Axis DRO System Installed and Cabinet Stand 1,320 TJ328-6134 6,498.98 5,199.00

• 6" 3-Jaw Chuck • 8" 4-Jaw Chuck • 10" Faceplate • Steady Rest • Follow Rest• 3 MT Dead Center • 4-Way Tool Post • Chip Pan • Toolbox • Threading Dial

Standard Equipment

14" x 40" Geared Head Gap Bed Bench LathesFeatures: • Full-length splashguard •2 hp, 220v, 1-ph. motor •Bed is hardened and ground

with reinforced cross ribs •D1-4 camlock spindle•3-year warranty on DRO

Specifications

Swing Over Bed: 14"Swing Over Cross Slide: 8"Distance Between Centers: 40"Swing Over Gap: 20"Spindle Bore Taper: 5 MTCenter Taper: 3 MT 18 Spindle Speeds: 70-1500 rpmLongitudinal Feeds: .002-.024"Cross Feeds: .001-.012"40 Inch Threads: 4-112 tpi22 Metric Threads: .25-6mmCross-Slide Travel: 6"Tailstock

Spindle Travel: 4" Center Taper: 3 MTBed Width: 7 1⁄8" Gap Width: 8"


SAVEUP TO

$1,300

$3,859As Low As

$3,859

13" x 40" Geared HeadGap Bed Bench Lathes 18 Speeds, 60 to 1500 rpm

•Hardened and ground bed with reinforced cross ribs•Headstock with tapered roller bearings •Thread chasing dial • Easy speed changes •Splash lubrication in headstock •Removable gap block•3-year warranty on DRO

Wt. Reg. SaleLbs. Model # Price PriceLathe Only1,100 TJ510-2585 $3,096.98 $2,599.95Lathe with Cabinet Stand1,345 TJ510-2591 3,396.98 2,799.95Lathe with Cabinet Stand Plus Anilam®

2-Axis DRO Installed1,355 TJ510-2592 4,796.98 3,699.95

Standard Equipment• 6" 3-Jaw Chuck • 7" 4-Jaw Chuck• Steady Rest • Follow Rest • 10" Faceplate • Chip Pan• 3 MT Dead Center • 11⁄16" Capacity • 4-Way Tool Post • Metric Change Gears• Threading Dial • Toolbox with Tools

$2,59995Starting At

$2,59995

Specifications

Swing Over Bed: 13" Cross-Slide Feed Range (Inch./Rev.): .0004-.0105"Table Work Surface Area: 13 x 40" Compound Travel: 211⁄16"Swing Over Gap: 183⁄4" Tailstock Spindle Travel: 33⁄4"Length of Gap: 9" Tailstock Taper: 3 MTSwing Over Cross Slide: 8" Spindle Nose Mounting: D1-4Swing Over Compound: 3" Spindle Bore Dia.: 11⁄2"Distance Between Centers: 391⁄3" Spindle Taper: 5 MTCarriage Travel: 34" Spindle Taper with Sleeve: 3 MTLong. Feed Range (Inch./Rev.): .0011-.0311" 18 Spindle Speeds: 60-1500 rpm40 Inch Threads: 4-112 tpi Motor & Electrics: 11⁄2 hp, 110/220v, 1 ph.29 Metric Threads: .25-4.5mm Machine Dimensions (w/o stand): 67L x 26W x 25"H

Floor Space Required (Max.): 72L x 34"W


SAVEUP TO

$1,097

See p. 9 for details

34-35 EH 10-11 MetalFabSand_Layout 1 10/15/10 10:10 AM Page 1








our Lease Payment Plans today!


Machinery

6" x 48" Belt &10" Disc Sanders

10" PSA Discs (80 Grit) Pkg. of 100Model # TJ391-3204 Reg. Price: $250.98 Sale Price: $129.00

Accessory

Mfr’s 1-YearLimited Warranty

Reg. SaleBrand Model # Price PriceRockford TJ510-2582 $659.98 $509.00Jet TJ328-1056 853.98 759.00

•Belt operates in horizontal or vertical position

•Two cast-iron tilt tables•Miter gage standard•1 hp, 115v, 1-phase

motor•1650 sfpm belt

speed/1750 rpm disc speed

• Wt.: 170 lbs.

SAVEUP TO

22%

$509As Low As

$509

6" Carbide/HSS Grinder


$18995Reg. Price$297.98

SAVE36%

•Supplied with 2 medium grit silicon carbide (green) wheels

Specifications:•Two 113⁄4 x 41⁄8" tool

tables tilt 45° up or down

•1⁄2 hp motor, single phase, 115v

•3450 rpm •Wt.: 110 lbs.

•Quick belt adjustment •Belt locks at any angle from horizontal to vertical•Tilting table with miter gage•3⁄4 hp, 115v, 1-phase motor•1350 sfpm • 45° table tilt•Approx. wt.: 130 lbs.

6" x 48" Belt & 9" Disc SanderWith Stand


$22995Reg. Price$334.98

SAVE31%

Combination 1" x 30" Belt & 5" Disc SanderUse for Grinding, Sharpening, Sanding &Polishing Wood & Metal

5" Aluminum Oxide PSA Discs


$7995Reg. Price$108.98

SAVE26%

On Sander

Specifications

Belt Size: 1W x 30"LDisc Size: 5"Motor & Electrics: 1⁄4 hp, 110v, 1 ph.Table Tilt: 0º to 45ºApprox. Wt.: 12.75 lbs.

Reg. SaleGrit Model # Price/100 Price/10036 TJ391-3161 $68.98 $48.2940 TJ391-3162 62.98 44.4350 TJ391-3163 59.98 42.4960 TJ391-3165 57.98 40.5780 TJ391-3164 54.98 38.70

Belt Sanders

Belt Wt. LowSize Lbs. Model # Price1 x 42" 29 TJ505-1371 $216.952 x 48 48 TJ505-1370 360.954 x 36 50 TJ240-3857 543.95

$21695As Low As

$21695

1" x 42" Sander—1⁄3 hp, 1-Phase Motor•1800 sfpm • Contact wheel • Tilt table • 1725 rpm2" x 48" Sander—1⁄2 hp, 1-Phase, 115v Motor•Contact wheel • Tilt table • Removable platen •Fully hinged guard • Vertical or horizontal•4500 sfpm • 3450 rpm4" x 36" Sander—1⁄2 hp, TEFC 1-Phase, 115v Motor•Direct drive • 3450 rpm • Full OSHA safety guard•Easy opening side door

for belt change

1 x 42" Sander

Combination 1" x 42" Belt& 8" Disc Sander

SAVE23%

•Belt table tilt: 45° out •Disc table size: 4 x 10"•Disc table tilt: 45° out •Dust collection outlet: 11⁄2" dia.•Overall dimensions: 22 x 21 x 14"•Belt table size: 61⁄8 x 71⁄8"•3000 sfm belt speed•1725 rpm disc speed•1⁄3 hp, 115v, 1 ph.,

60 Hz motor•Approx. wt.: 62 lbs.Mfr's # J-4002


$25595Reg. Price$334.98

















Machinery

36

We stock over 20,000 Replacement

Replacement Belts

6" x 89" Belt Edge SanderWith Heavy-Duty Stand

•Table can be tilted for horizontal/verticalsanding • Belt tension can be easilyadjusted • 32" table length

•2 hp, 60 Hz motor, 110/220v

•3900 fpm •Approx. wt.:

240 lbs.$69995Sale PriceModel# TJ163-6089

$69995Reg. Price$798.98

Reg. SaleGrit Model # Price Price40 TJ385-9040 $9.09 $7.9980 TJ385-9080 8.14 7.29

SAVE12%

On Sander

4 Ton Hand NotcherNotch Any Shearable Material•Heavy-duty blades

Mild Steel Cap.:16 Gauge Max. Notch:6" x 6" x 90° Stroke: 3⁄4"Stainless Cap.: 20 Gauge Table Size: 171⁄2 x 12"

Specifications

SAVE17%

On NotcherWt. Reg. Sale

Description Lbs. Model # Price. PriceNotcher 235 TJ130-5110* $349.98 $289.95Stand 22 x 20 x 30" 90 TJ130-5115 179.98 139.99

Stand soldseparately

$28995Notcher Only

$28995Replacement Blades

Description Model # PriceUpper TJ505-6932 $49.00Lower TJ505-6933 49.00

*Ships via truck

•Compound leverage for easy operation•Long handle provides plenty of

shearing torque•Tool steel blades for long life•Mounts directly to

your workbench

Bench Top Shears

$56As Low As

$56

Blade Handle Wt. Reg. SaleL L Lbs. Model # Price Price5" 28" 20 TJ130-5705 $66.98 $56.006 28 40 TJ130-5710 76.98 65.008 39.5 54 TJ130-5715 88.98 75.0012 39.5 100 TJ130-5700 119.98 99.00

Blade L: Cap. Round: Flat Bar: Plates:5" 3⁄8" 23⁄4 x 3⁄16" 3⁄32"6 3⁄8 23⁄4 x 1⁄4 3⁄32

8 7⁄16 23⁄4 x 1⁄4 1⁄812 7⁄16 23⁄4 x 1⁄4 1⁄8

SpecificationsSAVEUP TO

17%

Cuts Sheet Steel, Bars & Rods

•Use for aligning jobs, such as straightening crankshaft and connecting rod

•Great for press fit, such as pressing in and out of shaft pin, gear and bushing

•Use for die press and punch press processing

Work Wt. Press Reg. SaleTon Range Lbs. Style Model # Price Price6 0-8" 68.2 H TJ307-0121 $142.98 $99.9512 0-5 193.6 HLC TJ307-0129 430.98 309.9512 0-5 127.6 HJC TJ307-0128 398.98 309.9512 0-26 106 A TJ307-0131 214.98 129.9520 0-29 224.4 H TJ307-0123 390.98 279.9530 0-34 286 HYC TJ307-0126 795.98 549.9545 0-31 693 HYC TJ307-0125 958.98 775.95

Style HYC

HydraulicShop Presses

Style A

Style H

SAVEUP TO

39%

$9995Starting At

$9995

• Extended shafts for buffing and polishing odd-shaped pieces

• Bearings lubricated for long life

• 3450 rpm • Cast-iron housing • Buffing wheels

not included

ElectricBuffers

$10995As Low As

$10995

Buffing Wheel Shaft Reg. Salehp Dia. Dia. Model # Price Price1⁄3 6" 1⁄2" TJ619-2890 $141.98 $109.951⁄2 8 3⁄4 TJ619-2891 204.98 151.951 10 1 TJ619-2892 396.98 295.95

SAVEUP TO

25%

•Suitable for shaping metal up to 19⁄16"wide and 3⁄16" thick

•Also bends tubes up to 3⁄8" thick and solid rods up to 1⁄4" diameter

•Can be mounted on a workbench•Supplied with metal box•Wt.: 12 lbs.

Metal Bender


$4995Reg. Price$78.98

SAVE36%

Rotary Machine22 Gauge Capacity

•5 to 6" long throat•Includes six rollers for turning,

burring, wiring, crimping andbeading

•Wt.: 72 lbs. $32995Sale PriceModel# TJ130-5400

$32995Reg. Price$498.98

SAVE33%

























Parts for the MACHINES We Sell!


Machinery

Sheet Metal Pan & Box BrakesBench Model

•Steel fingers can be removed or repositioned for custom metal work

•Model #TJ130-5061includes counterbalance

$35995As Low As

$35995

SAVE14%

On Bench

Specifications TJ130-5051 TJ130-5061

Mild Steel Cap.: 22 Gauge 16 GaugeStainless Cap.: 26 Gauge 20 GaugeMax. Beam Lift: 7⁄8" 11⁄4"Max. Bend L: 481⁄4" 481⁄4"Min. Reverse Bend: 5⁄16" 5⁄16"Finger Width: 2, 3, 4" 2, 3, 4"No. of Fingers: 16 16Max. Box Depth: 3" 3"Beam Adjustment: 0-1⁄8" 0-1⁄2"

Wt. Reg. SaleModel Gauge Lbs. Model # Price PriceBench 22 280 TJ130-5051 $419.98 $359.95Bench 16 309 TJ130-5061 579.98 499.00Stand 64 TJ130-5075 199.98 139.95

TJ130-5051

Wet-Dry Grinders

8"/5"•8" wet grinder wheel for fine finishing•5" dry wheel for removing deep nicks and scratches without damaging•Blade holder for easy sharpening • 1⁄4 hp water tank for cooling•3450 maximum rpm • 1" wheel width • 1" spindle • Wt.: 30 lbs.10"/5"•Dual-purpose machine having a 10" wet wheel in fine grit for

finishing fine edge tools and a 5" dry wheel for coarse grinding•The water bath of the large wheel allows sharpening of cutting

tools without ruining tempered steel•Wheel speeds are regulated by worm gear and screw•1-phase waterproof motor •Furnished with eye shields, adjustable tool rests and cord•Wheel specifications: 10" OD x 11⁄2 x 7⁄8" bore, 3500 rpm;

5" OD x 5⁄8 x 1⁄2" bore, 7400 rpm•No reversing switch supplied • Wt.: 30 lbs.

Accessories

Reg. SaleDescription Model # Price PriceCast-iron stand 311⁄4" H TJ328-1960 $87.98 $79.008" Wet Replacement Wheel TJ619-2888 72.98 49.955" Dry Replacement Wheel TJ328-1959 38.98 27.2910" Wet Replacement Wheel TJ391-2111 54.98 38.49


$14399

Stand(optional)


$12595Reg. Price$253.98

Reg. Price$287.98

SAVE50%

8"/5"

10"/5"

50" x 16 Gauge Power Roll

Motor: 440v*, 3 ph., 3⁄4 hp Roll Speed: 22 rpmCapacity: 16 gauge Min. Radius: 1.5"Roll Dia.: 3" Weight: 880 lbs.

Specifications

*Can be rewired to 230v

$1,86995Sale PriceModel# TJ130-5510

$1,86995Reg. Price$2,597.98

SAVE$728

1-Year LimitedWarranty

This Unbelievable Deal Includes Grinder 160-1015 with Pedestal•1⁄3 hp, 110v, capacitor start

motor, adjustable tool rest•Pre-drilled base for easy mounting, wheel size: 6" x 3⁄4" x 1⁄2"

• Approx. wt.: 64 lbs.


$6995Reg. Price$109.98


$149Reg. Price$198.98

6" Deluxe BenchGrinder & Pedestal

•Sharpens up to 15 3⁄4"•1000 grit, 8" wheel with blade

holder to sharpen planer blades•5⁄8" spindle•Water tank for cooling•120v, 1.5 amp

quiet motor• 500 max. rpm•Wt.: 29 lbs.

Planer BladeSharpener

SAVE25%

Model # TJ619-2888 Reg. Price: $72.98 Sale Price: $49.95

Replacement Wheel

Combination 1 x 42" Belt & 8" Disc Sander• Belt table tilts

30° forward• 1720 rpm motor • 1⁄3 hp, single phase,

110v motor• Includes miter gage • Wt.: 51 lbs.

SAVE20%


$11598Reg. Price$199.98

Great forPolishing,

Sharpening &Grinding




















Bandsaws

38

Ask The Enco Tech Team to help

5" x 6" CombinationHorizontal/VerticalBandsaw3 Speeds•Quickly change from horizontal to

vertical position •Vise swivels 45° left • 1⁄3 hp, 110/220v

motor • Speed changes 80, 120, 200sfpm • Automatic cut-off safety switch

•Mitering vise & blade guard•Wt.: 125 lbs.•BONUS blade SAVE

21%

Replacement Blades• 641⁄2 x 1⁄2 x .025" thick Carbon Steel Replacement BladesModel # TJ371-0162 10 tpi Model # TJ371-0161 14 tpi Model # TJ371-0163 18 tpi Model # TJ371-0164 24 tpi Reg. Price $9.29 Ea./Sale Price $6.99 Ea.

Bi-Metal Replacement BladeModel # TJ240-4930 10-14 tpiReg. Price $24.98 Ea./Sale Price $14.99 Ea.

Specifications

Max. Workpiece Width: 6"Throat Depth: 41⁄8"Horizontal Cap. Round: 5"Blade Size: 641⁄2 x 1⁄2 x .025"Wheel Dia.: 7 3⁄8"Vertical Saw Height: 56"Horizontal Saw Height: 38"Machine Dim.: 38L x 12"D



$21995Reg. Price$279.98

Shop the

Enco Master Catalog 24/7

use-enco.com

$7951 year limited warranty!

7" x 12" Horizontal/Vertical Bandsaws•Heavy cast-iron base with quick swivel

lock vise and vertical saw table•Adjustable hydraulic downfeed and coolant system•Safety automatic shutoff and adjustable material stop•Worm gears are hardened and ground•Roller cabinet has built-in chip pan•Motor & electrics: 1 hp, 115/230v, 1 ph., 1720 rpm•Model # TJ137-3190 includes blade guards,

chip brush, adjustable roller blade guides•Model # TJ137-3195 has a geared head

for quick speed changes

Specifications TJ137-3190 TJ137-3195

Blade Speeds: (4) 85, 130, 180, 285 sfpm (3) 127, 216, 268 sfpmBlade Size: 93 x 3⁄4 x .032" 93 x 3⁄4 x .032"Cutting Cap. 90˚: 7 x 12", 7" Round 7 x 12", 7" RoundCutting Cap. 45˚: 4 1⁄2 x 7"Approx. Wt.: 350 lbs. 350 lbs.

Reg. SaleDescription Model # Price PriceHoriz./Vert. Bandsaw TJ137-3190 $976.98 $795.00Geared Head Horiz./Vert. Bandsaw TJ137-3195 1,177.98 899.00

Bi-Metal Blade• 10-14 tpi• 93L x 3⁄4W x .035" thickModel # TJ371-0412Sale Price 1-4 $32.95; 5+ $23.95

TJ137-3190

Replacement Blades

Starting At

$795

SAVEUP TO

23%


7" x 101⁄2" Horizontal/Vertical BandsawGeared Swivel Head for Quick Speed Changes•Heavy cast-iron base with quick-lock vise •Hydraulic feed and coolant system •Hardened and ground worm gear, vertical table saw


$1,15995Reg. Price$1,539.98

SAVE$380

Specifications

Motor & Electrics: 1 hp, 220v, 60 Hz,1 ph., 1720 rpm

3 Blade Speeds : 127, 216, 268 sfpmCutting Capacity 90°: 7 x 10 1⁄2", 7" roundCutting Capacity 45°: 4 x 41⁄2", 4" roundBlade Size: 93 x 3⁄4 x .032"Machine Dimensions: 50L x 22 1⁄2"DApprox Wt.: 400 lbs.

143⁄4" & 18" Vertical BandsawInfinitely Variable Speed

Standard Equipment• Large cap. built-in welder and grinder• 1⁄8" to 5⁄8" width cap.• Grinding wheel and built-in light• Blade cutter


$2,19995Starting At

$2,19995

Cutting Reg. SaleWidth Model # Price Price143⁄4" TJ135-1545 $2,798.98 $2,199.9518 TJ135-1551 3,046.98 2,395.95

Specifications 143⁄4" 18"

Cap. Thickness: 91⁄4" Max. 10" Max.Table Size: 193⁄4 x 193⁄4" 231⁄2 x 191⁄2"Blade Length: 114.7" 136"Blade Width: 3⁄32 to 5⁄8" 3⁄32 to 5⁄8"Blade Thickness: .025" .025"Speeds: 65 to 265 sfpm 80 to 320 sfpmFloor to Table Ht.: 391⁄4" 38 1⁄4"Overall Height: 68" 79"Welder: 1.2 kva 2.4 kvaMotor & Electrics: 1 hp, 220v, 1 ph. 1 hp, 220v, 3 ph.Wt.: 760 lbs. 770 lbs.

•Cuts steel, aluminum alloys, cast iron, brass, plastic or plexiglass•Table inclination 15° front and back, 15° right and left

SAVEUP TO

$651

38-39 EH 10-11 Bandsaws Bkg_Layout 1 10/15/10 10:13 AM Page 1



















you select the Right Machine!


Bandsaws

7" x 12" Horizontal/Vertical Bandsaw

Replacement BladesHard EdgeFlex BackBlade –7'9"L x 3⁄4"W

Specifications

Motor & Electrics: 1 hp, 110v, 60 Hz, 1725 rpm4 Blade Speeds: 90, 135, 195, 255 sfpmBlade Size: 93 x 3⁄4 x .032"Cutting Cap.: 7 x 12"Approx. Wt.: 314 lbs.

Reg. SaleTPI Model # Price PriceCarbon—.032" Thick8 TJ371-3164 $11.57 $9.9914 TJ371-3165 11.57 9.99


Hydraulic Feed & Coolant Pump

•Portable on four 5" casters•Heavy cast-iron base with quick-lock vise,

vertical table saw•Hardened and ground worm gears•Auto shut-offIncludes:10 x 10" vertical table and 45° swivel vise. SAVE

$127


$73295Reg. Price$859.98

EachQty.: 5+

Bi-Metal Bandsaw BladesWelded to Length

Blade Mfr's Sale Price EachL W TPI Model # List 1-4 5+7' 9" 3⁄4" 6-10 TJ371-0410 $46.26 $32.95 $23.957' 9 3⁄4 10-14 TJ371-0412 46.26 32.95 23.9510' 3⁄4 6-10 TJ240-4965 55.07 30.95 25.9510' 3⁄4 10-14 TJ240-4966 55.07 30.95 25.9510' 1 10-14 TJ240-4967 63.01 30.95 25.9511' 6" 1 5-8 TJ240-4831* 70.80 42.95 35.9511' 6" 1 10-14 TJ371-0446 70.80 44.95 37.95

$2395As Low As

$2395

•Cobalt high-speed steel cutting edge • Designed for long life in a wide variety of utility and contour cutting operations • Thickness: .035" • Variable tooth

SAVEUP TO

59%

*Positive Tooth

Replacement BladeFlexback 6 tpi• 135 x 1 x .035"Model # TJ990-4073Sale Price $19.95

10" x 16" Swivel Frame &10" x 17" Horizontal Bandsaws•Heavy-duty, cast-iron frame•Blade chip brush • Safety guards•Automatic stop • Coolant system•TJ136-2810 features

swivel frame and90-45° quick-acting vise

•TJ136-2800 features 90-60° quick-acting vise


Reg. SaleDescription Model # Price Price10" x 16" Bandsaw TJ136-2810 $4,297.98 $3,359.0010" x 17" Bandsaw TJ136-2800 3,197.98 2,298.00

10 x 16"model shown

$2,298Starting At

$2,298Specifications 10" x 16" Swivel Frame 10" x 17" Horizontal Frame

Motor & Electrics: 2 hp, 220/440v, 3 ph., 60 Hz, 1750 rpm 2 hp, 220/440v, 3 ph., 60 Hz, 1750 rpm4 Blade Speeds: 82, 131, 167 & 232 sfpm 82, 131, 167, 246 sfpmCutting Cap. 90°: 10 x 16" 10 x 17"Cutting Cap. 45°: 9 x 10" 10 x 10"Blade Size: 135 x 1 x .035" 135 x 1 x .035" Machine Dim.: 67L x 22"D 75L x 28"W Approx. Wt.: 1068 lbs. 792 lbs.

SAVEUP TO

$938

9" x 16" Horizontal BandsawWith Built-In Coolant System

Replacement BladesBi-Metal Blades• 128L x 1W x .035" thickModel # TJ326-0018 - 10 tpiModel # TJ326-0017 - 10-14 tpi Low Price $45.99 Ea.

Specifications

Max. Workpiece Width (90°): 161⁄2"Throat Depth: 91⁄2" Vise Jaw Height: 51⁄4" Max. Workpiece Width (45°): 83⁄4" Drive: 4 Step Pulley & Worm Gear4 Blade Speeds: 50, 125, 200, 275 sfpmBlade Size: 1281⁄2 x 1 x .035"Wheel Dia.: 14"Motor: 1 hpFloor Space Req.: 30 x 65"

SAVE$280•Iron saw frame • Blade guide • Blade included • Double row of adjustable

bearings support saw blade • Frame maintains blade and wheel alignment•Rollers back-up head control cylinder with needle

valve • Quick-positioning vise, with fully adjustable jaws for 0°-45° angles

•On/off controls with automatic shutoff, large hand wheel with tension spring for easy blade tensioning • Wt.: 760 lbs.

•220v • 1 phase


$1,92995Reg. Price$2,209.98


38-39 EH 10-11 Bandsaws Bkg_Layout 1 10/15/10 10:13 AM Page 2



















Fluids/Lubricants

40

It's IN STOCK and

Eco-Friendly–Contains No Oil!

Cutting Fluid

• Use on stainless steels, high carbon, high chrome and cast iron• Use for drilling, tapping, spot facing, counterboring, milling, fly cutting, seat

forming, engraving, broaching and many other type operations • Excellent rust retardancy • Free of chlorine, fluorine, lead, sulfur and silicon• Contains no nitrates, chromates, mercury or formaldehyde-based compounds• Approved for use in machine shops operating under the Federal Meat

and Poultry Products Inspection Program (P-1)

Reg. SaleSize Model # Price Price8 oz. Bottle TJ825-8100 $7.95 $5.951⁄2 pt. Screw Top TJ825-8105 7.95 5.951 gal. Plastic Jug TJ825-8115 33.98 25.49

Vytron-N Superior Synthetic CoolantSave with Our Concentrated Formulas•Extends sump life • Protects against rust•Machining and grinding on ferrous materials •Prevents rancidity •Reduces coolant disposal by 100%

and consumption by up to 50%

Reg. SaleSize Model # Price Price1 gal. TJ505-2068 $25.98 $21.955 TJ505-2069 108.98 98.00

QualityCoolants At An

AffordablePrice!

SAVEUP TO

15%

$2195As Low As

$2195

Metalworking Fluids5 Gallon Pails

$4999Starting At

$4999

Oak Signature VALCOOL® Reg. SaleModel No. Equivalent Model # Price PriceDSY 4100 VNT 920 TJ893-1987 $56.98 $49.99DSS 700 VNT 700 TJ893-1986 81.98 55.99DSS 800 VNT 800 TJ893-1985 90.98 69.99DSS T-TECH Turn Tech TJ893-1984 90.98 75.99

Recommended starting dilution of 5% for all.DSS 700 & DSS 800— Semi-Synthetic•Ideal for general-purpose machining and grinding •Suited for ferrous and most nonferrous materialsDSS 700 Cutting/Grinding Fluid•For light- to moderate-duty applications, such as

milling, turning, drilling and surface grindingDSS Cutting/Grinding Fluid•Designed for moderate- to heavy-duty applications,

such as deep hole drilling, boring, reaming, tapping, internal and/or grinding

DSS T-TECH—Synthetic•Duty range: moderate- to heavy-duty operations•Recommended for machining and grinding

aluminum, iron and steel •Excellent lubricity, rancidity and mold control DSY 4100—Synthetic•Ideal for roll and surface grinding•For light- to moderate-duty operations•Exceptionally good bacteria, mold, foam, and rust control •Best suited for cast iron, nodular iron, and carbon steels

100% Compatible

with theOriginal

VALCOOL®

OAKWASH® DSC AL •Recommended for cleaning individual machine and central

system reservoirs, metalworking fluid lines, premix tanks, machines and parts

•Improves rancidity control by removing dirt, grit, insoluble soaps and oils

• Removes insoluble soaps from dirty central systems in hard water areas. Does not redeposit soil

•Can also be used at 4% to 5% for aluminum quenching•Thoroughly removes chip deposits and tramp oil from

central systems and machines•Contains corrosion-inhibiting ingredients to protect

machines and parts, both ferrous and nonferrous, from rusting during cleaning


$5595Reg. Price$75.98

For all combinations of cast iron, steel and nonmetallic way materials on small-to-medium machine tools; flood application in large machines.•Additives eliminate stick-slip and chatter

under thin-film lubrication conditions; allows smooth, uniform motion even at low table speeds

•Contains no Class 1 ozone-depleting chemicals

Vactra® No. 1, 2, 3 &4 Way Oil

$1499As Low As

$1499Reg. Sale

Size Model # Price PriceNo. 15 gal. TJ893-2096 $93.98 $75.99No. 21 gal. TJ505-1987 20.10 14.995 TJ505-1988 81.98 65.99No. 35 gal. TJ328-1135 88.98 72.95No. 41 gal. TJ505-1989 20.10 14.995 TJ505-1990 82.98 72.00

SAVEUP TO

25%

Cutting & Tapping Fluid• Performs extremely well

on all metals, including aluminum, stainless steel, Inconel and titanium

• May be used straight or as an additive to enhance inexpensive cutting oils

Contains no 1,1,1-Trichloroethane, methylene chloride, sulfur or chlorine—Safe for the ozone layer

Price EachCase Less Than Case

Size Qty. Model # Case Qty.16 oz. Aerosol 12 TJ319-3897* $13.47 $9.994 oz. Spout Top 24 TJ319-3896 2.53 1.991 pt. Can 12 TJ891-4158 8.77 6.491 gal. Can 2 TJ505-1978 51.98 38.985 gal. Pail 1 TJ505-2032 — 149.95

PerformsExtremely

Well On AllMetals!

* No air shipment

40-41 EH 10-11 Fluids_Layout 1 10/15/10 10:14 AM Page 1






















READY TO SHIP!


Fluids/Lubricants

TRIM® Metalworking Fluids


Desc. Size Qty. Model # Case Qty.TRIM® E206 1 gal. Jug 1 TJ319-3910 — $22.95TRIM® E206 5 gal. Pail 1 TJ319-3911 — 101.95TRIM® SOL 1 gal. Bottle 4 TJ319-3899 $25.98 21.95TRIM® SOL 5 gal. Pail 1 TJ319-3900 — 97.95TRIM® SC200 1 gal. Bottle 4 TJ319-3906 24.40 19.95TRIM® SC200 5 gal. Pail 1 TJ319-3907 — 82.95

E206 Soluble Oil•Designed as a general-purpose, multi-metal coolant for

general machining of ferrous and nonferrous metals•EP additive controls built-up edge•Fine-emulsion particle size reduces carry-off and

facilitates getting fluid to point of cut•Leaves a fluid, oily, non-gumming film SOL® Heavy-Duty Soluble Oil•Excellent for the machining of aluminum

and aluminum alloys•Leaves a fluid residue that will not varnish up•Wide applications range from 3 to 25%SC200 Semi-Synthetic Cutting & Grinding Fluid•Good for ferrous and nonferrous materials

and aluminum•No smoke under normal conditions

$1995As Low As

$1995Ea. Case Qty.: 4+

No. 1 Cutting Fluid

Wt. Reg. SaleSize Lbs. Model # Price Price1 pt. 1.26 TJ825-8550 $4.22 $3.091 gal. 9 TJ825-8560 15.49 11.595 gal. Pail w/Spigot 47.58 TJ825-8570 70.98 52.95

$309As Low As

$309•Works on all ferrous and

nonferrous materials•For threading, tapping,

drilling, reaming and turning

•Prevents rust

SAVE25%


$1195Reg. Price$14.93

• Non-staining, non-corrosive multipurpose mineral-type cutting and lubricating oil

• Use in automatic screw machine shops, moderate-duty hydraulic systems and airline oilers

• High-speed machining of aluminum and brass (26 cSt at 40˚C)

• General machining of nickel-tin-bronzealloys and free machining of steels

• Meets anti-weld and lubricity requirements of most severe machine operations on metals like copper and its alloys

•Closer tolerances and improved finish

Mobilmet® 404 Medium-Duty Cutting Oil

1 Gal. Jug

Anti-MistFormula For

A SaferWorkplace

Non-Toxic. Does not contain 1,1,1-trichloroethane or perchlorethane. Contains No Class 1 Ozone-Depleting Chemicals.•Effective on "difficult-to-machine" metals, such as stainless

steel and aerospace alloys • Works on most metals, including aluminum and titanium • Maintains stability to 750°F • Molybdenum disulfide (MoS2) withstands pressures up to 400,000 psi—beyond the yield point of any known metal

Lubricants

STICK WAX®

Cutting & DrawingGeneral-Purpose Solid Lubricant•Offers the lubricating properties of wax in a cardboard tube•Apply directly on the cutting surface of tools, saw blades,

grinding wheels and sanding belts as well as windows, doors, fasteners, hinges, slides and tracks • 15 oz. tube



Moly-Dee Tapping Fluid

Reg. SaleSize Model # Price Price16 oz. Spout Top TJ505-1985 $29.98 $16.491 Gallon TJ505-1986 121.98 85.95

SAVEUP TO

45%

WS-5050 Heavy-Duty Soluble OilMulti-purpose coolant for all machining operations and metals except titanium.•Suitable for CNC machining •Excellent on aluminum • Non-staining

Reg. SaleSize Model # Price Price1 gal. TJ505-2053 $32.98 $25.955 TJ505-2054 131.98 105.95

SAVEUP TO

21%

$10595Sale Price5 Gallons

$10595

IndustrialStrengthLubricant


Size Qty. Model # Case Qty.16 oz. Aerosol 12 TJ825-8405* $8.95 $7.9520 oz. Spray Bottle 12 TJ505-1161 16.80 12.951 gal. Jug 4 TJ505-1158 36.98 31.95

$795As Low As

$795Case Qty.

*11 oz. net fill

•Ozone-friendly, no CFC's•Fast-acting penetrant•Protects against

corrosion indoors and out

Cutting & Tapping FluidA New Safer Biodegradable Formula –Not a Cutting Oil. Does Not Contain 1,1,1-Trichloroethane. Contains No Class 1Ozone-Depleting Chemicals.Unique HYDRO-LUBE®

formulation quickly penetrates to the cutting edge and instantly breaks down the metal-to-metal bonds formed during severe machining operations. Just a few drops give dramatic results such as precise machining, superior surface finish and extended tool life.


Size Qty. Model # Case Qty.

8 oz. Spout Top 12 TJ325-5965 $4.69 $3.891 pt. Spout Top 12 TJ505-2022 7.99 6.491 gal. Can 4 TJ505-2023 45.98 39.985 gal. Pail 1 TJ505-2024 222.98 159.95

$389As Low As

$389

40-41 EH 10-11 Fluids_Layout 1 10/15/10 10:14 AM Page 2























Abrasives

42


Type 27 FlapDiscs41⁄2" Dia.

•100% zirconia •Recommended for

aggressive use •One-step grinding, blending

and finishing of metal•Layered for cooler

grinding and longer life

SAVEUP TO

49%

$295As Low As

$295Reg. Sale

Grit Model # Price Price7⁄8" Hole Dia.24 TJ327-9344 $5.55 $2.9536 TJ327-9347 5.55 2.9540 TJ317-1246 5.55 2.9560 TJ327-9362 5.29 2.9580 TJ327-9348 5.55 2.95120 TJ327-9349 5.55 2.955⁄8"-11 Hole Dia.24 TJ327-9351 7.76 3.9536 TJ327-9352 7.76 3.9540 TJ327-9353 7.76 3.9560 TJ327-9354 7.76 3.9580 TJ327-9355 7.76 3.95120 TJ327-9350 7.76 3.95

Hole Max. Reg. SaleDia. Size rpm Model # Price PriceBlack41⁄2" 5⁄8"-11 11,000 TJ328-1564 $10.12 $8.1041⁄2 7⁄8 11,000 TJ328-1563 8.38 6.707 5⁄8-11 7000 TJ328-1566 18.26 14.357 7⁄8 7000 TJ328-1565 15.67 12.75Red41⁄2 5⁄8-11 11,000 TJ328-1568 10.59 8.4541⁄2 7⁄8 11,000 TJ328-1567 8.59 6.857 5⁄8-11 7000 TJ328-1570 18.72 15.007 7⁄8 7000 TJ328-1569 15.66 12.75

EZ Strip WheelsNon-woven Clean & Strip Wheels•Quickly removes rust, scaling, oxidation,

paints, sealants and other clogging materials

•For use on stainless steel, steel, aluminum,titanium, nonferrous metals, fiberglass, stone and wood

•Black: coarse and can provide a satin finish

•Red: extra coarse and more aggressive, with a longer life

$670Starting At

$670SAVE

UP TO

21%

Fibre Backed Discs

Aluminum Oxide•Resin bond,

fibre backing •For weld

removal, blending and finishing on all ferrous metals

•Long lasting, aggressive cutting, first quality

Zirconia•Self-sharpening zirconia

alumina offers superior performance on all metals,including stainless steel andother tough alloys

•Resists loading, giving longergrinding life for heavy-dutystock removal

AluminumOxide Sale Price Each Zirconia Sale Price Each

Grit Model # 1-24 25+ Model # 1-24 25+4" Dia., 5⁄8" Hole24 TJ391-6002 $.58 $.49 TJ391-2950 $.88 $.5936 TJ391-6003 .54 .49 TJ391-2951 .72 .4950 TJ391-6004 .54 .39 TJ990-1327 .64 .4960 TJ391-6005 .48 .29 TJ391-2952 .64 .4980 TJ391-6006 .45 .29 TJ990-1329 .57 .3941/2" Dia., 7⁄8" Hole24 TJ391-6102 .64 .49 —36 TJ391-6103 .62 .49 TJ391-6602 .95 .7950 TJ391-6104 .58 .39 TJ391-6603 .95 .7960 TJ391-6105 .58 .39 TJ391-6604 .84 .5980 TJ391-6106 .55 .39 TJ391-6605 .79 .59100 TJ391-6107 .55 .39 —120 TJ391-6108 .55 .39 —5" Dia., 7⁄8" Hole24 TJ391-6202 .63 .39 TJ990-1331 .95 .6936 TJ391-6203 .57 .49 TJ391-6702 .95 .6950 TJ391-6204 .57 .39 TJ391-6703 .80 .5960 TJ391-6205 .57 .49 TJ391-6704 .80 .5980 TJ391-6206 .56 .39 TJ391-6705 .80 .59100 TJ391-6207 .56 .39 —120 TJ391-6208 .56 .39 —7" Dia., 7⁄8" Hole24 TJ391-6302 .87 .59 TJ391-6801 1.41 1.0936 TJ391-6303 .85 .59 TJ391-6802 1.35 .9950 TJ391-6304 .85 .59 TJ391-6803 1.25 .8960 TJ391-6305 .77 .59 TJ391-6804 .95 .8980 TJ391-6306 .73 .49 TJ391-6805 .95 .89

SAVEUP TO

39%In Pkg. Qty.

29¢As Low As

29¢Each Qty.: 25+

AZ SurfaceGrinding WheelsType 1

Reg. SaleGrit Hardness Model # Price Price7 x 1⁄4", 11⁄4" Hole Dia.60 I TJ422-0267 $11.81 $8.9960 J TJ890-8905 11.81 8.9960 K TJ890-8906 11.81 8.9980 J TJ890-9062 11.81 8.9980 K TJ890-8907 11.81 8.997 x 1⁄2", 11⁄4" Hole Dia.46 H TJ890-8909 14.99 11.9946 I TJ890-8910 14.99 11.9946 J TJ890-8911 14.99 11.9946 K TJ422-0275 14.99 11.9960 H TJ422-0279 14.99 11.9960 I TJ890-8913 14.99 11.9960 J TJ890-8914 14.99 11.9960 K TJ890-8915 14.99 11.9960 L TJ422-0204 14.99 11.9980 K TJ890-8916 14.99 11.99100 K TJ890-9074 14.99 11.998 x 1⁄2", 11⁄4" Hole Dia.46 H TJ890-8917 20.15 15.9946 I TJ890-9076 20.15 15.9946 J TJ890-8918 20.15 15.9946 K TJ890-8919 20.15 15.9960 J TJ890-9081 20.15 15.9960 K TJ890-9082 20.15 15.9980 K TJ422-0250 20.15 15.9912 x 1", 3" Hole Dia.46 J TJ422-0205 63.98 50.9946 K TJ422-0206 63.98 50.9960 K TJ422-0234 63.98 50.99

Offers a friable grain and a cooler bond. Excellent on materials 55RC and above, but can also be used on general tool steel.Meets OSHA safety requirements and are final inspected to ensure balance and grad-ing. Speed tested for 6500 sfpm operation.

SAVEUP TO

23%

Stainless Steel Plater'sHand Brush•No. of rows: 3 x 7•Brush length: 13⁄8"•Overall length: 73⁄4"•Trim length: 1⁄2"


$195Reg. Price$2.30

42-43 EH 10-11 Abrasives_Layout 1 10/15/10 10:15 AM Page 1





























































































Abrasives

American PatternFlat & Mill Files

Mill Files•For sharpening mill or circular saws,

draw-filing and finishing metals •All sizes tapered slightly

in width • Two square edges • Single cut on sides and edges

Flat Files •Flat files, which are of rectangular cross

section and have double-cut teeth, arecommonly used by machinists, machinerybuilders, ship and engine builders

•Used wherever metal must be removed rap-idly and finish is of secondary importance

• Slightly tapered toward the points in bothwidth and thickness and are cut on bothsides

Mill File

Flat File

Flat Files

Mill FilesPkg. Mfr's Sale

L Qty. Model # List PriceBastard4" 12 TJ382-1236 $5.60 $3.296 12 TJ382-1238 5.60 3.298 12 TJ382-1240 6.75 4.0510 6 TJ382-1242 8.66 5.1912 6 TJ382-1244 14.12 8.3914 6 TJ619-0255 19.09 11.3916 6 TJ619-0257 26.60 15.89Second Cut6 12 TJ382-1246 8.15 4.898 12 TJ382-1248 9.16 5.4910 6 TJ382-1250 11.71 6.9912 6 TJ382-1252 15.40 9.19Smooth4 12 TJ382-1254 8.53 5.096 12 TJ382-1256 8.66 5.198 12 TJ382-1258 10.18 6.0910 6 TJ382-1260 12.47 7.3912 6 TJ382-1262 16.92 10.0914 6 TJ619-0256 23.41 13.99

Pkg. Mfr's SaleL Qty. Model # List PriceBastard4" 12 TJ619-0264 $7.89 $4.696 12 TJ382-1202 8.27 4.898 12 TJ382-1204 10.31 6.0910 6 TJ382-1206 12.73 7.5912 6 TJ382-1208 17.43 10.3914 6 TJ619-0266 24.05 14.3916 6 TJ619-0269 31.69 18.99Second Cut6 12 TJ382-1210 8.78 5.198 12 TJ382-1212 11.33 6.7910 6 TJ382-1214 14.63 8.6912 6 TJ382-1216 19.72 11.7914 6 TJ619-0267 27.62 16.49Smooth4 12 TJ619-0265 9.80 5.796 12 TJ382-1218 10.44 6.198 12 TJ382-1220 12.09 7.1910 6 TJ382-1222 17.13 9.7912 6 TJ382-1224 21.88 12.6914 6 TJ619-0268 30.29 17.99

SAVEUP TO

42%

EXL DeburringWheelsConvolute

•Silicon carbide oraluminum oxide

SAVEUP TO

21%$3559Starting At

$3559

Wheel Density/ Max. Mfr's SaleMaterial Grit rpm Model # List Price6D x 1/2W x 1"HA/O 8 Med. 6000 TJ505-6160 $43.03 $35.59S/C 9 Fine 6000 TJ505-6165 43.03 35.596D x 1W x 1"HA/O 8 Med. 6000 TJ505-6161 60.25 49.89S/C 8 Fine 6000 TJ505-6163 60.25 49.89S/C 9 Fine 6000 TJ505-6166 60.25 49.89S/C 8 Med. 6000 TJ990-1147 60.25 51.998D x 1W x 3"HA/O 8 Med. 4500 TJ505-6162 75.36 62.29S/C 8 Fine 4500 TJ505-6164 75.36 58.95S/C 9 Fine 4500 TJ505-6167 75.36 59.95

Zirconia Alumina &Aluminum Oxide Flap DiscsType 29

•Hole dia.: 7⁄8" •Use on portable

disc grinders and sanders

Aluminum Oxide•Use for weld removal, blending,

finishing and deburring on all ferrous metals•General-purpose sanding and grindingZirconia•Use on stainless steel and other tough metals for

heavier stock removal and increased durability

Zirconia AluminumAlumina Oxide Sale Price Each

Dia. Grit Model # Model # 1-9 10+41⁄2" 24 TJ391-7240 TJ391-7200 $3.79 $2.9541⁄2 40 TJ391-7242 TJ391-7202 3.79 2.9541⁄2 60 TJ391-7244 TJ391-7204 3.79 2.9541⁄2 80 TJ391-7246 TJ391-7206 3.79 2.9541⁄2 120 TJ391-7248 TJ391-7208 3.79 2.957 36 TJ240-3611 — 7.99 6.657 60 TJ240-3612 — 7.99 6.657 80 TJ240-3613 — 7.99 6.657 120 TJ240-3614 — 7.99 6.65

$295As Low As

$295EachQty.: 10+

SAVEUP TO

22%Qty.: 10+

Shop Roll Assortment PacksAluminum Oxide

Three 25 Yd. Rolls in Each Pack• Convenient dispenser pack with

three grits

• Designed for durability on tougher burs• 6" wheels have 6000 max. rpm and

8" wheels have 4500 max. rpm

EX2 Deburring WheelsHarder Than EXL

Hole Reg. SaleSize Dia. Material Grit Density Model # Price Price6 x 1⁄2" 1" A/O Medium 8 TJ317-1738 $51.98 $45.956 x 1⁄2 1 S/C Fine 8 TJ317-1739 51.98 45.956 x 1⁄2 1 S/C Medium 8 TJ317-1740 53.98 47.956 x 1 1 A/O Medium 8 TJ317-1741 72.98 64.956 x 1 1 S/C Fine 8 TJ317-1742 72.98 64.956 x 1 1 S/C Medium 8 TJ317-1743 72.98 64.956 x 1 1 S/C Fine 9 TJ317-1744 72.98 64.958 x 1 3 A/O Medium 8 TJ317-1747 90.98 80.958 x 1 3 S/C Medium 8 TJ317-1749 90.98 80.958 x 1 3 S/C Fine 9 TJ317-1750 90.98 80.95

SAVEOVER

10%

SAVEUP TO

39%$2595Reg. Sale

W Grit Model # Price Price1" 80, 120, 180 TJ337-1068 $43.00 $25.951 120, 180, 240 TJ337-1069 43.00 25.9511⁄2 80, 120, 180 TJ337-1070 64.51 41.9511⁄2 120, 180, 240 TJ337-1071 64.51 41.952 80, 120, 180 TJ337-1072 86.01 55.952 120, 180, 240 TJ337-1073 86.01 55.95

Mounted Point Sets

For use with air and electric die grinders, plus mold and die machines. •13⁄4" long •Assorted shapes

and sizes •Diamond plated • In indexed plastic case

Shank Reg. SaleSet Size Model # Price Price10 Pc. 1⁄4" TJ388-5215 $18.22 $9.9920 Pc. 1⁄8 TJ388-5200 36.98 14.79

SAVEUP TO

60%$999As Low As

$999

As Low As

$2595















































































Abrasives

44


74¢As Low As

74¢Each InPkg. Qty.

•For heavy deburring, cleaning and finishing

•Locks with a half twist •Available in package

quantity only

Roloc™ SurfaceConditioning Discs

Sale Price EachPkg. Less Than Pkg.

Dia. Grit Color Qty. Model # Pkg. Qty. Qty.2" Coarse Brown 50 TJ505-6242 $1.09 $.832 Medium Maroon 50 TJ505-6245 1.04 .742 Very Fine Blue 50 TJ505-6248 1.09 .832 Super Fine Gray 50 TJ505-6251 1.11 .853 Coarse Brown 25 TJ505-6243 1.99 1.523 Medium Maroon 25 TJ505-6246 1.99 1.523 Very Fine Blue 25 TJ505-6249 2.08 1.593 Super Fine Gray 25 TJ505-6252 2.03 1.55

Disc Pads And ShaftDisc Pad Max. Reg. SaleDia. Hardness rpm Model # Price Price2" Medium 25,000 TJ505-6258 $15.43 $12.953 Medium 18,000 TJ505-6260 18.81 14.951⁄4" Threaded Shaft TJ505-6261* 1.95 —

Accessories

*Not 3M

SAVEUP TO

28%In Pkg. Qty.

Hand Pads•Outperforms steel wool, wire brushes and other non-woven hand pads •Never rusts and

can be used with water solvents

•6 x 9"

SAVEUP TO

18%In Pkg. Qty.


$4595Reg. Price$64.86

60 Pad Value Pack

Sale Price Per PadPkg. Less Than Pkg.

Color Finish Mfr's # Qty. Model # Pkg. Qty. Qty.Lt. Gray Ultra Fine 7448 20 TJ505-6134 $1.13 $.93Maroon Very Fine 7447 20 TJ505-6132 .95 .78Maroon Very Fine 8447 20 TJ505-6135* 1.21 .99Brown Medium 6444 20 TJ505-6127 1.22 1.01Tan Coarse 7440 10 TJ505-6128 3.05 2.52Gray Ultra Fine 6448 20 TJ510-0415 1.12 .93White Super Fine 7445 20 TJ505-6130 1.06 .88Gray Medium 7446 10 TJ505-6131 2.06 1.69Holder 961 10 TJ505-6138 5.11 4.22

* Perforated

785C Ceramic Fibre Discs• Blend of ceramic and aluminum oxide

material with grinding aid• Ideal for stainless steel

fabrication, food service and restaurant equipment and food productsmachinery

• Hole size: 7⁄8"

Reg. SaleDia. Grit Model # Price Price41⁄2" 36 TJ505-6065 $3.05 $2.6941⁄2 50 TJ505-6068 2.85 2.4941⁄2 60 TJ505-6070 2.72 2.3941⁄2 80 TJ505-6073 2.54 2.195 36 TJ505-6064 2.79 2.495 50 TJ505-6067 2.61 2.295 80 TJ505-6072 2.33 2.097 36 TJ505-6063 3.14 2.797 50 TJ505-6066 2.94 2.597 60 TJ505-6069 2.79 2.497 80 TJ505-6071 2.63 2.29

$209As Low As

$209

LD-WL Light Deburring WheelsSilicon Carbide

•Fine grit •For light deburring and

finishing of softer metals•Removes feathered bands

on aluminum, brass, etc.•Blends mill marks on soft

metal surfaces

Hole Reg. SaleDia. W Dia. Density Model # Price Price6" 1⁄2" 1" 6 TJ327-9433 $42.98 $35.956 1⁄2 1 7 TJ327-9434 45.98 38.956 1⁄2 1 8 TJ327-9435 45.98 38.956 1 1 6 TJ327-9436 64.98 54.956 1 1 7 TJ327-9437 64.98 54.956 1 1 8 TJ327-9438 64.98 54.958 1⁄2 3 8 TJ327-9440 54.98 45.958 1 3 7 TJ327-9442 80.98 67.958 1 3 8 TJ327-9443 80.98 67.95

$3595Starting At

$3595

Quick-Change SurfaceConditioning DiscsAluminum Oxide

Type R are interchangeable with Roloc,Lockit, TR, and Type III style. Type S are interchangeable with TS,Socatt, Speedlock and Type II style.

Price EachType R Type S Less Than Pkg.

Dia. Grade Model # Model # Pkg. Qty.Pkg. Qty.: 501" Medium TJ317-1453 — $.58 $.3811⁄2 Coarse TJ240-3564 TJ240-3555 .65 .4211⁄2 Medium TJ240-3565 TJ240-3556 .65 .4211⁄2 Very Fine TJ240-3566 TJ240-3557 .65 .422 Coarse TJ240-3567 TJ240-3558 .83 .542 Medium TJ240-3568 TJ240-3559 .83 .542 Very Fine TJ240-3569 TJ240-3560 .83 .54Pkg. Qty.: 253 Coarse TJ240-3570 TJ240-3561 1.40 .913 Medium TJ240-3571 TJ240-3562 1.40 .913 Very Fine TJ240-3572 TJ240-3563 1.40 .91

For use with a variety of electric and air-powered tools for deburring,blending, cleaning and finishing.• High initial and extended rate of cut• Maintains high-cut rate with light pressure• Most efficient on ferrous metals where final

finish is important

SAVEUP TO

39%

SAVEUP TO

16%

11⁄4 lb. Bar BuffingComposition

Used with Buffs—WearEye Protection•Cut compounds have

more aggressiveaction

•Color compounds produce higher luster

•Weight varies depending on composition

Reg. SaleDescription Type Uses Model # Price PriceTripoli Cut Copper, Brass, Aluminum TJ891-5176 $5.38 $3.99Emery Heavy Cut Steel, Stainless Steel TJ891-5177 5.61 4.19Stainless Cut/Color Steel, Stainless Steel TJ891-5179 8.40 6.29Emerald Hi-Color Steel, Stainless Steel TJ891-5180 13.46 9.99White Rouge Color Ferrous

& Nonferrous Metals TJ891-5182 7.10 5.29

$399As Low As

$399

SAVE25%



































































Industry GUARANTEED!


Abrasives

Remove burs and spiral chips from holes, slots,and straight edges on tough jobs involvingsteel, stainless steel, aluminum and plastic.

Includes: • Blue Glo-Burr B & E handles•10 each B10S and E100S cobalt blades

22 Pc. Cobalt Deburring SetWith 2 Glo-Burr Handles & 20 Cobalt Blades


$1495Reg. Price$22.83

Cobalt BladesSale Price Each

Style Model # 1-49 50-99 100-499 500+B10S TJ422-0003 $1.97 $1.49 $1.29 $1.09E100S TJ422-0002 2.53 1.89 1.69 1.39

SAVE34%

On Set

3⁄4" Thick x 1" Thick x 1" Face Reg. Sale 3⁄4" Face Reg. Sale

Grit Grade Model # Price Price Model # Price Price100 Coarse TJ307-3447 $131.98 $83.99 TJ391-5642 $174.98 $93.99150 Medium TJ307-3448 131.98 83.99 TJ391-5716 174.98 93.99220 Fine TJ307-3449 131.98 83.99 TJ391-5640 174.98 93.99

6" Diamond-Plated Grinding WheelsFor Grinding Carbide Tools

•Outlasts vitrified wheels 20 to 1 •Never needs dressing • 11⁄4" arbor•Fits Baldor and other popular

carbide bench grinders

SAVEUP TO

46%

$8399Starting At

$8399

20 Pc. PolishingStone Sets

Each set includes: 150 to 400 grits. Hard andsemi-hard, oil-filled aluminum oxide, andmedium soft and hard silicon carbide.

Aluminum OxideSanding Belts

•Resin-bonded sanding belts with "X"weighted cotton backing and break-resistant joints

•For heavy-duty grinding and deburring

•Use on steel, nonferrous metals,wood and plastics

SAVE40%

Qty.: 25+

68¢As Low As

68¢Each Qty.: 25+

Price EachPkg. Less Than

W x L Grit Qty. Model # 1-49 50+Polyester Backing R824 Y Wt.1⁄2 x 18" 60 50 TJ317-1296 $2.33 $1.751⁄2 x 18 80 50 TJ317-1295 2.33 1.751⁄2 x 24 60 50 TJ505-6168 2.31 1.691⁄2 x 24 80 50 TJ505-6169 2.20 1.651⁄2 x 24 120 50 TJ505-6170 2.39 1.793⁄4 x 18 60 50 TJ317-1346 2.73 2.053⁄4 x 18 80 50 TJ317-1344 2.49 1.793⁄4 x 18 120 50 TJ317-1345 2.44 1.791 x 42 80 200 TJ317-1347 4.46 3.296 x 48 60 20 TJ317-1292 21.51 16.096 x 48 80 20 TJ317-1293 19.69 14.756 x 48 120 20 TJ317-1294 19.22 14.39Synthetic Backing 77F YF Wt.1⁄2 x 18 120 50 TJ327-9152 2.26 1.691 x 42 60 50 TJ317-1298 4.87 3.651 x 30 60 200 TJ327-9174 4.34 3.251 x 30 80 50 TJ327-9167 3.65 2.691 x 48 60 50 TJ327-9170 7.14 5.291 x 48 80 50 TJ317-1348 6.58 4.89

• Combination of 3M™Cubitron™ mineral andspecial aluminum-oxidemineral

• Provides optimum performance on stainless steel and nickel alloy

SandingBelts 777F Resin Bond, Cloth Backing

SAVE25%In Pkg. Qty.

$175As Low As

$175

Size/ Sale Price Ea.Grit Model # 1-24 25+1 x 42"40 TJ337-0410 $1.73 $1.0460 TJ337-0412 1.13 .6880 TJ337-0413 1.13 .68100 TJ337-0414 1.13 .68120 TJ337-0415 1.51 .912 x 48"40 TJ337-0438 2.65 1.5960 TJ337-0440 2.06 1.2480 TJ337-0441 1.94 1.16100 TJ337-0442 1.94 1.16120 TJ337-0443 1.95 1.17

Size/ Sale Price Ea.Grit Model # 1-24 25+

4 x 36"40 TJ337-0538 $3.89 $2.3360 TJ337-0539 3.74 2.2480 TJ337-0540 3.40 2.04100 TJ337-0541 3.40 2.04120 TJ337-0542 3.40 2.046 x 48"40 TJ337-0569 7.96 4.7860 TJ337-0571 6.21 3.7380 TJ337-0572 5.96 3.58100 TJ337-0573 5.96 3.58120 TJ337-0574 5.96 3.58

$2995As Low As

$2995

SAVE20%

Reg. SaleW x Th. x L Model # Price Price1⁄4 x 1⁄16 x 4" TJ399-6630 $37.98 $29.951⁄4 x 1⁄8 x 6 TJ399-6632 39.98 31.951⁄4 x 1⁄4 x 6 TJ399-6634 44.98 35.951⁄2 x 1⁄16 x 4 TJ399-6636 36.98 28.951⁄2 x 1⁄8 x 6 TJ399-6638 46.98 36.951⁄2 x 1⁄4 x 6 TJ399-6640 58.98 46.95

6" Rubberized Abrasive Blocks & Sticks

Blocks and sticks are excellentfor cleaning and polishingmetal surfaces, breakingedges, smoothing away highspots, removing rust, heatmarks, tarnish, and stains.

Coarse Medium Fine X-Fine Reg. SaleWidth Thick. Dia. Model # Model # Model # Model # Price PriceOblong1" 3⁄8" TJ388-4055 TJ388-4056 TJ388-4057 TJ388-4058 $11.65 $10.59Square1⁄4 1⁄4 — TJ317-1149 — TJ317-1150 5.90 4.991⁄2 1⁄2 TJ388-4060 TJ388-4061 TJ388-4062 TJ388-4063 10.16 8.59Round

3⁄16" — — TJ317-1159 TJ317-1160 4.71 3.991⁄4 TJ388-4065 — TJ388-4067 TJ388-4068 5.30 4.595⁄16 — TJ317-1162 TJ317-1161 — 5.90 4.993⁄8 TJ388-4070 TJ388-4071 TJ388-4072 TJ388-4073 6.05 4.991⁄2 TJ388-4075 TJ388-4076 TJ388-4077 TJ388-4078 8.41 7.59

SAVEUP TO

15%

$459As Low As

$459
















































































End Mills

46


2 & 4 Flute HSS Single End MillsRegular Length

Mill Shank Flute 2 Flute Reg. Flute 4 Flute Reg. SaleDia. Dia. Length OAL Model # Price Length OAL Model # Price Price1⁄8" 3⁄8" 3⁄8" 25⁄16" TJ320-0010 $4.79 3⁄8" 25⁄16" TJ320-0510 $4.92 $2.493⁄16 3⁄8 7⁄16 25⁄16 TJ320-0020 4.79 1⁄2 23⁄8 TJ320-0520 4.92 2.491⁄4 3⁄8 1⁄2 25⁄16 TJ320-0030 4.79 5⁄8 21⁄2 TJ320-0530 4.92 2.495⁄16 3⁄8 9⁄16 25⁄16 TJ320-0040 4.79 3⁄4 21⁄2 TJ320-0540 4.92 2.493⁄8 3⁄8 9⁄16 25⁄16 TJ320-0060 4.79 3⁄4 21⁄2 TJ320-0550 4.92 2.497⁄16 3⁄8 13⁄16 21⁄2 TJ320-0070 6.72 1 211⁄16 TJ320-0570 6.17 3.191⁄2 1⁄2 1 3 TJ320-0100 6.61 11⁄4 31⁄4 TJ320-0600 6.17 3.199⁄16 1⁄2 11⁄8 31⁄8 TJ320-0110 7.99 13⁄8 33⁄8 TJ320-0610 8.55 4.495⁄8 5⁄8 15⁄16 37⁄16 TJ320-0130 9.25 15⁄8 33⁄4 TJ320-0630 10.34 4.493⁄4 1⁄2 15⁄16 35⁄16 TJ320-0160 10.57 15⁄8 35⁄8 TJ320-0660 11.30 6.393⁄4 3⁄4 15⁄16 37⁄16 TJ320-0180 10.57 15⁄8 33⁄4 TJ320-0680 11.78 6.491 3⁄4 11⁄2 33⁄4 TJ320-0280 15.11 17⁄8 41⁄8 TJ320-0780 16.73 9.8911⁄8 3⁄4 15⁄8 37⁄8 TJ320-0300 31.98 2 41⁄4 TJ320-0777* 24.53 18.4911⁄4 3⁄4 15⁄8 37⁄8 TJ320-0330 31.98 2 41⁄4 TJ320-0827* 25.98 18.49 *6 Flute

$249As Low As

$249

SAVEUP TO

56%

Mill Shank Flute Reg. SaleDia. Dia. Length OAL Model # Price Price1⁄8" 1⁄8" 3⁄16" 11⁄2" TJ325-2218 $8.84 $6.893⁄16 3⁄16 1⁄4 11⁄2 TJ325-2219 9.48 8.651⁄4 1⁄4 3⁄8 2 TJ325-2220 12.08 11.29

Single Flute Half Round End MillsSolid Micrograin Carbide 60°Conical Nose RH Cut

SAVEUP TO

22%

A low cost tool for cutting phenolics and other plastics. Also ideal for shallow cuts on nonferrous metals.

Mill Shank Flute 2 Flute Flute 4 Flute Reg. SaleDia. Dia. Length OAL Model # Length OAL Model # Price Price1⁄8" 3⁄8" 3⁄8" 31⁄16" TJ320-1010 3⁄8" 31⁄16" TJ320-1510 $6.66 $2.995⁄32 3⁄8 7⁄16 31⁄8 TJ320-1020 7⁄16 31⁄8 TJ320-1520 7.15 2.993⁄16 3⁄8 7⁄16 31⁄8 TJ320-1030 1⁄2 31⁄4 TJ320-1530 6.66 2.991⁄4 3⁄8 1⁄2 31⁄8 TJ320-1050 5⁄8 33⁄8 TJ320-1550 6.66 2.995⁄16 3⁄8 9⁄16 31⁄8 TJ320-1070 3⁄4 31⁄2 TJ320-1570 6.66 2.993⁄8 3⁄8 9⁄16 31⁄8 TJ320-1090 3⁄4 31⁄2 TJ320-1590 6.66 2.997⁄16 1⁄2 13⁄16 33⁄4 TJ320-1110 1 41⁄8 TJ320-1610 9.70 4.991⁄2 1⁄2 13⁄16 33⁄4 TJ320-1130 1 41⁄8 TJ320-1630 9.70 4.999⁄16 5⁄8 1 1⁄8 41⁄2 TJ320-1140 13⁄8 5 TJ320-1640 14.13 6.995⁄8 5⁄8 1 1⁄8 41⁄2 TJ320-1150 13⁄8 5 TJ320-1650 14.13 6.993⁄4 3⁄4 1 5⁄16 5 TJ320-1170 15⁄8 55⁄8 TJ320-1670 17.80 7.997⁄8 7⁄8 1 9⁄16 51⁄2 TJ320-1190 17⁄8 61⁄8 TJ320-1690 22.63 10.991 1 1 5⁄8 57⁄8 TJ320-1200 17⁄8 63⁄8 TJ320-1700 26.98 14.99

2 & 4 Flute HSS Double End Mills

$299As Low As

$299

Regular Length

SAVEUP TO

58%

M-42 Cobalt Roughing End MillsFine & Coarse Tooth

Fine Tooth• Provides a better finish than coarse tooth and eliminates

chipping in harder materials • For use in high production milling in

a variety of exotic materialsCoarse Tooth• For use where heavy roughing cuts are

followed with a finishing operation• Can be run at heavier feed rates

with less chatter and vibration• Requires less horsepower than

conventional end mills• For heavy-duty milling of mild steels,

soft to medium hard steels, stainless steels and nonferrous metals

TiN Coating• Improves tool life and allows for

elevated feeds and speeds

TiN Coated

Uncoated

$1495As Low As

$1495

Uncoated TiN Coated UncoatedMill Shank Flute No. of Non-Centercutting Reg. Sale Non-Centercutting Reg. Sale Centercutting Reg. SaleDia. Dia. Length OAL Flutes Model # Price Price Model # Price Price Model # Price PriceFine Tooth3⁄8" 3⁄8" 3⁄4" 21⁄2" 4" TJ337-6189 $27.94 $14.95 TJ337-6270 $31.11 $15.95 TJ337-6823 $39.02 $16.951⁄2 1⁄2 11⁄4 31⁄4 4 TJ337-6192 36.12 18.95 TJ337-6273 41.57 21.95 TJ337-6826 50.52 22.955⁄8 5⁄8 15⁄8 33⁄4 4 TJ337-6196 45.10 23.95 TJ337-6277 51.36 27.95 TJ337-6829 61.79 29.953⁄4 3⁄4 15⁄8 33⁄4 4 TJ337-6198 53.60 26.95 TJ337-6279 61.20 32.95 TJ337-6832* 77.67 35.951 1 2 41⁄2 5 TJ337-6205 80.41 38.95 TJ337-6285 94.15 49.95 —11⁄4 11⁄4 2 41⁄2 6 — — TJ337-6840 145.65 72.95Coarse Tooth3⁄8 3⁄8 3⁄4 21⁄2 4 TJ337-5974 27.94 14.95 TJ337-6025 31.11 15.95 TJ337-6100 35.49 16.951⁄2 1⁄2 11⁄4 31⁄4 4 TJ337-5978 36.12 18.95 TJ337-6029 41.57 21.95 TJ337-6104 45.92 22.955⁄8 5⁄8 15⁄8 33⁄4 4 TJ337-5983 45.10 23.95 TJ337-6033 51.36 27.95 TJ337-6107 56.15 29.953⁄4 3⁄4 15⁄8 33⁄4 4 TJ337-5989 53.60 25.95 TJ337-6036 61.20 32.95 TJ337-6110* 70.63 35.951 1 2 41⁄2 5 TJ337-5996 80.41 39.95 TJ337-6044 94.15 49.95 TJ337-6114 101.86 49.9511⁄4 11⁄4 2 41⁄2 6 TJ337-6003 104.97 49.95 TJ337-6051 121.96 65.95 TJ337-6117 132.43 72.95

SAVEUP TO

56%

*37⁄8" OAL

4 Pc. Coarse Tooth M-42 Cobalt RoughingEnd Mill SetCoarse tooth roughing end mills for heavy cuts, deep slotting and pocketing.•Multi-flute •In wooden standIncludes 1 of each:1⁄2 x 1⁄2, 5⁄8 x 5⁄8, 3⁄4 x 3⁄4& 1 x 3⁄4"


$6959Reg. Price$115.98

46-47 EH 10-11 End Mills Bkg_Layout 1 10/15/10 10:16 AM Page 1




























































































Service – 800-USE-ENCO


End Mills

2 & 4 FluteCarbide BallDouble End MillsStub & Regular Lengths

•Centercutting • Solid micrograin carbide

SAVEUP TO

48%

Mill Shank Flute Reg. SaleDia. Dia. Length OAL Model # Price Price2 Flute1⁄16" 1⁄8" 1⁄8" 11⁄2" TJ322-7904 $18.80 $11.493⁄32 1⁄8 3⁄16 11⁄2 TJ322-7906 19.72 11.993⁄16 3⁄8 1⁄2 31⁄4 TJ326-0062 55.98 28.991⁄8 1⁄8 1⁄4 11⁄2 TJ322-7908 15.45 9.791⁄8 3⁄8 3⁄8 31⁄16 TJ325-2502 52.98 28.995⁄32 3⁄16 5⁄16 2 TJ322-7910 23.11 14.293⁄16 3⁄16 3⁄8 2 TJ322-7912 23.28 14.391⁄4 1⁄4 1⁄2 21⁄2 TJ322-7916 28.98 17.495⁄16 5⁄16 1⁄2 21⁄2 TJ322-7920 40.98 24.993⁄8 3⁄8 9⁄16 21⁄2 TJ322-7924 54.98 32.991⁄2 1⁄2 5⁄8 3 TJ322-7932 71.98 43.994 Flute1⁄16 1⁄8 1⁄8 11⁄2 TJ322-8904 18.80 11.493⁄32 1⁄8 3⁄16 11⁄2 TJ322-8906 19.72 11.993⁄16 3⁄8 1⁄2 31⁄4 TJ325-2506 55.98 28.991⁄8 3⁄16 1⁄4 11⁄2 TJ322-8908 18.35 9.791⁄8 3⁄8 3⁄8 31⁄16 TJ325-2505 52.98 28.995⁄32 3⁄16 5⁄16 2 TJ322-8910 23.11 14.293⁄16 3⁄16 3⁄8 2 TJ322-8912 23.28 14.391⁄4 1⁄4 1⁄2 21⁄2 TJ322-8916 28.98 17.495⁄16 5⁄16 1⁄2 21⁄2 TJ322-8920 40.98 24.993⁄8 3⁄8 9⁄16 21⁄2 TJ322-8924 54.98 32.991⁄2 1⁄2 5⁄8 3 TJ322-8932 71.98 43.99

$979As Low As

$979

Ideal for Bridgeport® Mills•2 flute set: 1 each of: 3⁄4, 7⁄8, 1, 11⁄8, 11⁄4 & 11⁄2"•3⁄4" shank • Multi-flute sets: 3⁄4, 7⁄8 & 1"

are 4 flute; 11⁄8, 11⁄4 & 11⁄2" are 6 flute

2 Flute

Multi-Flute

SAVEUP TO

41%

6 Pc. 2 & Multi-Flute HSSSingle End Mill Sets

2 Flute Reg. Sale Multi-Flute Reg. SaleBrand Model # Price Price Model # Price PriceEnco TJ990-3058 $108.98 $65.95 TJ990-3060 $111.98 $65.95USA — TJ990-3061 204.98 145.95

$6595As Low As

$6595

2 & 4 Flute Carbide Single End MillsUncoated & TiN Coated

Regular Length •Centercutting • Solid micrograin carbide

Uncoated

TiN Coated

Uncoated TiN CoatedMill Shank Flute 2 Flute 4 Flute Reg. Sale 2 Flute 4 Flute Reg. SaleDia. Dia. Length OAL Model # Model # Price Price Model # Model # Price Price1⁄16" 1⁄8" 3⁄16" 11⁄2" TJ322-5004 TJ322-6004 $7.12 $4.99 TJ322-5104 TJ322-6104 $9.16 $5.593⁄32 1⁄8 3⁄8 11⁄2 TJ322-5006 TJ322-6006 6.73 4.99 TJ890-9956 TJ891-7052 8.23 5.591⁄8 1⁄8 1⁄2 11⁄2 TJ322-5008 TJ322-6008 6.22 4.99 TJ322-5108 TJ322-6108 7.31 5.895⁄32 3⁄16 9⁄16 2 TJ322-5010 TJ322-6010* 9.19 5.99 TJ325-2550 TJ325-2556 11.33 6.593⁄16 3⁄16 5⁄8 2 TJ322-5012 TJ322-6012 8.70 6.29 TJ322-5112 TJ322-6112 9.79 7.891⁄4 1⁄4 3⁄4 21⁄2 TJ322-5016 TJ322-6016 10.50 6.99 TJ322-5116 TJ322-6116 12.70 8.295⁄16 5⁄16 13⁄16 21⁄2 TJ322-5020 TJ322-6020 14.73 9.99 TJ322-5120 TJ322-6120 17.68 12.493⁄8 3⁄8 7⁄8 21⁄2 TJ322-5024 TJ322-6024 18.35 11.99 TJ322-5124 TJ322-6124 21.30 15.997⁄16 7⁄16 1 23⁄4 TJ322-5028 TJ322-6028 22.39 16.99 TJ990-1603 TJ990-1599 31.98 20.991⁄2 1⁄2 1 3 TJ322-5032 TJ322-6032 28.98 17.99 TJ322-5132 TJ322-6132 32.98 22.999⁄16 9⁄16 11⁄8 31⁄2 TJ322-5036 TJ322-6036 49.98 31.99 TJ990-1604 TJ990-1600 62.98 38.995⁄8 5⁄8 11⁄4 31⁄2 TJ322-5040 TJ322-6040 56.98 39.99 TJ322-5140 TJ322-6140 61.98 47.993⁄4 3⁄4 11⁄2 4 TJ322-5048 TJ322-6048 82.98 49.99 TJ322-5148 TJ322-6148 88.98 61.791 1 11⁄2 4 TJ990-1606 TJ322-6050 123.98 95.99 TJ990-1605 TJ990-1602 134.98 115.99*1⁄2" flute length

SAVEUP TO

54% $499As Low As

$499

2 Flute HSS BallDouble End Mills•30˚ helix

Mill Shank Flute Reg. SaleDia. Dia. Length OAL Model # Price Price1⁄8" 3⁄8" 3⁄8" 31⁄16" TJ320-3805 $12.05 $4.593⁄16 3⁄8 7⁄16 31⁄8 TJ320-3810 12.05 4.591⁄4 3⁄8 1⁄2 31⁄8 TJ320-3815 12.05 4.595⁄16 3⁄8 9⁄16 31⁄8 TJ320-3820 12.05 4.593⁄8 3⁄8 9⁄16 31⁄8 TJ320-3825 12.05 4.597⁄16 1⁄2 13⁄16 33⁄4 TJ320-3830 17.63 8.491⁄2 1⁄2 13⁄16 33⁄4 TJ320-3835 17.63 8.495⁄8 5⁄8 11⁄8 41⁄2 TJ320-3850 24.14 9.953⁄4 3⁄4 15⁄16 5 TJ320-3860 30.98 15.491 1 15⁄8 57⁄8 TJ320-3870 46.98 21.95

$459Starting At

$459

End Mill SetsHSS & TiN Coated

CentercuttingIncludes: 3⁄16, 1⁄4, 5⁄16, 3⁄8, 7⁄16, 1⁄2, 9⁄16, 5⁄8, 11⁄16 & 3⁄4"•Wood case

No. of Reg. SalePcs. Style/Coating Model # Price Price4 Flute10 Double End TiN Coated TJ320-9006 $85.98 $55.992 & 4 Flute20 Single End HSS TJ320-0000 87.98 49.9520 Double End HSS TJ320-0006 97.98 79.95

$4995As Low As

$4995TJ320-0006

SAVEUP TO

43%

SAVEUP TO

61%

46-47 EH 10-11 End Mills Bkg_Layout 1 10/15/10 10:16 AM Page 2
































































































End Mills

48


4 Flute CentercuttingM-42 Cobalt End MillsUncoated

• For use in finishing operations• Best choice for high-strength,

heat-resistant, exotic and difficult-to-machine materials

SAVEUP TO

42%

Mill Shank Reg. SaleDia. Dia. LOC OAL Model # Price Price1⁄8" 3⁄8" 3⁄8" 25⁄16" TJ337-5706 $16.31 $9.393⁄16 3⁄8 1⁄2 23⁄8 TJ337-5711 16.31 9.391⁄4 3⁄8 11⁄4 31⁄16 TJ337-5721 21.36 12.955⁄16 3⁄8 3⁄4 21⁄2 TJ337-5726 16.31 9.395⁄16 3⁄8 13⁄8 31⁄8 TJ337-5728 21.36 12.953⁄8 3⁄8 3⁄4 21⁄2 TJ337-5730 16.31 9.393⁄8 3⁄8 11⁄2 31⁄4 TJ337-5732 21.36 12.951⁄2 1⁄2 11⁄4 31⁄4 TJ337-5741 23.42 13.951⁄2 1⁄2 2 4 TJ337-5744 29.23 18.955⁄8 5⁄8 15⁄8 33⁄4 TJ337-5747 32.72 19.395⁄8 5⁄8 21⁄2 45⁄8 TJ337-5748 39.04 26.953⁄4 3⁄4 15⁄8 37⁄8 TJ337-5752 39.14 23.953⁄4 3⁄4 3 51⁄4 TJ337-5756 47.41 29.951 1 2 41⁄2 TJ337-5767 58.21 33.951 1 4 61⁄2 TJ337-5771 80.53 51.95

M-42 Cobalt Roughing& Finishing End MillsUncoated & TiN Coated

•Rough and finish in a single pass; feeds should be reduced for maximum performance (about 25% for profiling, 40% for slotting)

•Requires less horsepower than a rougherTiN Coated•Extends tool life • Used for aggressive machining of steels •Provides increase of 25 to 30% in machining speed

vs. uncoated tools

Uncoated

TiN Coated

Mill Shank Flute No. of Uncoated Reg. Sale TiN Coated Reg. SaleDia. Dia. Length OAL Flutes Model # Price Price Model # Price Price1⁄4" 3⁄8" 5⁄8" 27⁄16" 4 TJ317-0419 $20.50 $11.29 TJ317-0412 $24.05 $14.455⁄16 3⁄8 3⁄4 21⁄2 4 TJ317-0427 20.50 11.29 TJ317-0420 24.05 14.453⁄8 3⁄8 3⁄4 21⁄2 4 TJ317-0414 20.50 11.29 TJ317-0407 30.98 17.001⁄2 1⁄2 1 3 4 TJ317-0406 27.98 15.39 TJ317-0399 35.98 21.591⁄2 1⁄2 11⁄4 31⁄4 4 TJ317-0403 27.98 15.39 TJ317-0395 35.98 21.591⁄2 1⁄2 15⁄8 35⁄8 4 TJ317-0415 34.98 19.25 TJ317-0409 43.98 26.395⁄8 5⁄8 11⁄4 33⁄8 4 TJ317-0421 32.98 18.15 TJ317-0426 41.98 25.195⁄8 5⁄8 15⁄8 33⁄4 4 TJ317-0413 33.98 18.69 TJ317-0410 40.98 26.653⁄4 3⁄4 3⁄4 3 4 TJ317-0417 41.98 23.09 TJ317-0423 50.98 35.693⁄4 3⁄4 11⁄4 31⁄2 4 TJ317-0422 38.98 25.35 TJ317-0408 50.98 35.693⁄4 3⁄4 15⁄8 33⁄4 4 TJ317-0404 38.98 25.35 TJ317-0396 44.98 35.953⁄4 3⁄4 21⁄2 45⁄8 4 TJ317-0424 49.98 29.99 TJ317-0401 61.98 40.293⁄4 3⁄4 3 51⁄4 4 TJ317-0418 55.98 30.79 TJ317-0400 64.98 42.251 3⁄4 2 41⁄4 5 TJ317-0398 62.98 34.65 —1 1 3 51⁄2 5 TJ317-0411 74.98 44.99 TJ317-0402 86.98 56.551 1 4 61⁄2 5 TJ317-0416 77.98 46.79 TJ317-0405 95.98 62.3911⁄4 11⁄4 6 81⁄2 6 TJ317-0397 178.98 107.39 TJ317-0425 223.98 145.59

SAVEUP TO

45%

2 & 4 FluteCarbide SingleEnd Mills•Stub length •Centercutting•Solid

micrograin carbide $439

As Low As

$439

SAVEUP TO

32%

Mill Shank Flute Reg. SaleDia. Dia. Length OAL Model # Price Price2 Flute1⁄32" 1⁄8" 1⁄16" 11⁄2" TJ325-2456 $7.67 $5.393⁄64 1⁄8 1⁄8 11⁄2 TJ325-2457 7.67 5.391⁄16 1⁄8 1⁄8 11⁄2 TJ325-2458 6.09 4.393⁄32 1⁄8 3⁄16 11⁄2 TJ325-2459 5.76 4.391⁄8 1⁄8 1⁄4 11⁄2 TJ323-5500 5.60 4.395⁄32 3⁄16 5⁄16 2 TJ325-2460 7.87 6.093⁄16 3⁄16 5⁄16 2 TJ323-5502 7.44 6.197⁄32 1⁄4 7⁄16 2 TJ325-2461 10.66 7.491⁄4 1⁄4 1⁄2 2 TJ323-5504 9.73 7.995⁄16 5⁄16 1⁄2 2 TJ990-1607 13.32 9.393⁄8 3⁄8 5⁄8 2 TJ323-5506 16.44 11.897⁄16 7⁄16 5⁄8 21⁄2 TJ990-1608 20.33 17.491⁄2 1⁄2 5⁄8 21⁄2 TJ323-5508 26.98 19.395⁄8 5⁄8 3⁄4 3 TJ323-5510 51.98 38.593⁄4 3⁄4 1 3 TJ323-5512 74.98 53.794 Flute1⁄32 1⁄8 3⁄32 11⁄2 TJ325-2462 7.67 5.793⁄64 1⁄8 1⁄8 11⁄2 TJ325-2463 7.67 5.391⁄16 1⁄8 1⁄8 11⁄2 TJ325-2464 6.09 4.393⁄32 1⁄8 3⁄16 11⁄2 TJ325-2465 5.76 4.391⁄8 1⁄8 1⁄4 11⁄2 TJ323-5600 5.60 4.395⁄32 3⁄16 5⁄16 2 TJ325-2466 7.87 6.093⁄16 3⁄16 3⁄8 2 TJ323-5602 7.44 5.697⁄32 1⁄4 7⁄16 2 TJ325-2467 10.66 7.491⁄4 1⁄4 1⁄2 2 TJ323-5604 9.73 7.095⁄16 5⁄16 1⁄2 2 TJ990-1609 13.32 9.393⁄8 3⁄8 5⁄8 2 TJ323-5606 16.44 11.097⁄16 7⁄16 5⁄8 21⁄2 TJ990-1617 20.33 17.491⁄2 1⁄2 5⁄8 21⁄2 TJ323-5608 26.98 19.395⁄8 5⁄8 3⁄4 3 TJ323-5612 51.98 38.593⁄4 3⁄4 1 3 TJ323-5614 74.98 53.79

2 & 4 Flute CarbideSingle End MillsLong & Extra Long Lengths

•Centercutting•Solid micrograin

carbide

SAVEUP TO

43%$769As Low As

$769

Mill Shank Flute 2 Flute 4 Flute Reg. SaleDia. Dia. Length OAL Model # Model # Price Price1⁄8" 1⁄8" 3⁄4" 11⁄2" TJ325-2253 TJ325-2260 $13.36 $7.691⁄8 1⁄8 3⁄4 21⁄4 TJ323-5100 TJ323-5200 14.07 7.891⁄8 1⁄8 1 3 TJ890-9957 TJ891-4640 14.07 9.895⁄32 5⁄32 3⁄4 2 TJ325-2254 TJ325-2261 18.80 11.393⁄16 3⁄16 3⁄4 21⁄2 TJ323-5102 TJ323-5202* 15.51 9.893⁄16 3⁄16 1 2 TJ325-2255† TJ325-2262 15.52 11.493⁄16 3⁄16 11⁄8 3 TJ890-9958 TJ891-4641 15.52 11.851⁄4 1⁄4 11⁄8 3 TJ323-5104 TJ323-5204 17.98 11.851⁄4 1⁄4 11⁄4 21⁄2 TJ325-2257 TJ325-2264 18.86 14.591⁄4 1⁄4 11⁄2 4 TJ890-9959 TJ891-4642 18.98 15.295⁄16 5⁄16 11⁄8 3 TJ323-5106 TJ323-5206 22.19 15.293⁄8 3⁄8 11⁄8 3 TJ323-5108 TJ323-5208 24.96 17.993⁄8 3⁄8 13⁄8 21⁄2 TJ325-2258 TJ325-2267 33.98 20.693⁄8 3⁄8 13⁄4 4 TJ890-9960 TJ891-4643 26.98 23.997⁄16 7⁄16 2 4 TJ323-5110 TJ323-5210 37.98 27.991⁄2 1⁄2 11⁄2 3 TJ325-2259 TJ325-2269 37.98 35.391⁄2 1⁄2 2 4 TJ323-5112 TJ323-5212 39.98 32.691⁄2 1⁄2 3 6 TJ890-9961 TJ891-4644 57.98 49.495⁄8 5⁄8 21⁄4 5 TJ323-5114 TJ323-5214 82.98 63.993⁄4 3⁄4 21⁄4 5 TJ323-5116 TJ323-5216 131.98 84.091 1 21⁄4 5 TJ323-5118 TJ323-5218 217.98 128.69

*Overall length: 2 1⁄4" † Overall length: 2 1⁄2"

48-49 EH 10-11 End Mills_Layout 1 10/15/10 10:17 AM Page 1



























































































































End Mills

Drill Point End Mills2 Flute Uncoated AlTiN Coated

•Uncoated & AlTiN coated • CNC ground•Tolerance: +.000/-.002"

Solid Carbide 90° Point Angle

2 Flute 4 Flute 2 Flute 4 FluteMill Shank Flute Uncoated Uncoated Reg. Sale AlTiN Coated AlTiN Coated Reg. SaleDia. Dia. Length OAL Model # Model # Price Price Model # Model # Price Price1⁄16" 1⁄8" 3⁄16" 11⁄2" TJ308-0210 TJ308-0581 $11.00 $6.95 TJ327-1611 TJ327-1622 $13.74 $8.953⁄32 1⁄8 3⁄8 11⁄2 TJ308-0211 TJ308-0582 11.00 6.95 TJ327-1612 TJ327-1623 13.74 8.951⁄8 1⁄8 1⁄2 11⁄2 TJ308-0212 TJ308-0583 10.59 6.95 TJ327-1613 TJ327-1624 13.27 8.953⁄16 3⁄16 5⁄8 2 TJ308-0213 TJ308-0584 14.89 9.95 TJ327-1614 TJ327-1625 18.14 11.951⁄4 1⁄4 3⁄4 21⁄2 TJ308-0214 TJ308-0585 18.62 12.95 TJ327-1615 TJ327-1626 24.51 16.955⁄16 5⁄16 13⁄16 21⁄2 TJ308-0215 TJ308-0586 22.90 15.95 TJ327-1605 TJ327-1616 29.98 20.953⁄8 3⁄8 1 21⁄2 TJ308-0216 TJ308-0587 28.98 19.95 TJ327-1606 TJ327-1617 35.98 24.957⁄16 7⁄16 1 23⁄4 TJ308-0217 TJ308-0588 38.98 27.95 TJ327-1607 TJ327-1618 47.98 32.951⁄2 1⁄2 1 3 TJ308-0218 TJ308-0589 47.98 33.95 TJ327-1608 TJ327-1619 57.98 39.955⁄8 5⁄8 11⁄4 31⁄2 TJ308-0219 TJ308-0590 89.98 62.95 TJ327-1609 TJ327-1620 107.98 75.953⁄4 3⁄4 11⁄2 4 TJ308-0220 TJ308-0591 132.98 93.95 TJ327-1610 TJ327-1621 159.98 112.95

SAVEUP TO

36%

Chamfering Countersinking Drilling SpottingSide Milling

$695As Low As

$695

•4 flute end mills are excellent for deep slotting application and alsofor use on aluminum and nonferrous materials

•Ball nose end mills have a helical gash (helix through the ball) forreduced cutting force, excellent finish and better chip control

4 Flute Centercutting Carbide End MillsSquare & Ball End • Uncoated & TiAlN Coated

Square End TiAIN Coated

Ball End Uncoated

Tolerances• Shank Dia.: +.0000/-.0003"• Cutting Dia.: +.000/-.001"

SAVEUP TO

62%$639As Low As

$639Square End Square End Ball End Ball End

Mill Shank Flute Uncoated Mfr's Sale TiAIN Coated Mfr's Sale Uncoated Mfr's Sale TiAIN Coated Mfr's SaleDia. Dia. Length OAL Model # List Price Model # List Price Model # List Price Model # List Price1⁄16" 1⁄8" 3⁄16" 11⁄2" TJ328-0019 $13.42 $6.39 TJ328-0029 $16.93 $7.89 TJ328-0039 $15.45 $7.89 TJ328-0049 $18.95 $9.891⁄8 1⁄8 1⁄2 11⁄2 TJ328-0020 13.42 6.39 TJ328-0030 16.93 7.89 TJ328-0040 15.45 7.89 TJ328-0050 18.95 9.893⁄16 3⁄16 5⁄8 2 TJ328-0021 19.33 8.89 TJ328-0031 23.80 11.39 TJ328-0041 22.22 11.39 TJ328-0051 26.69 13.891⁄4 1⁄4 3⁄4 21⁄2 TJ328-0022 24.45 10.39 TJ328-0032 33.62 12.69 TJ328-0042 28.11 14.89 TJ328-0052 37.28 18.895⁄16 5⁄16 13⁄16 21⁄2 TJ328-0023 28.40 14.39 TJ328-0033 42.08 18.39 TJ328-0043 32.67 16.39 TJ328-0053 46.35 23.393⁄8 3⁄8 1 21⁄2 TJ328-0024 38.28 18.39 TJ328-0034 51.96 23.39 TJ328-0044 44.03 22.39 TJ328-0054 57.71 28.891⁄2 1⁄2 1 3 TJ328-0025 62.98 26.89 TJ328-0035 79.86 29.89 TJ328-0045 72.44 36.89 TJ328-0055 89.31 45.395⁄8 5⁄8 11⁄4 31⁄2 TJ328-0026 105.36 57.89 TJ328-0036 129.84 65.39 TJ328-0046 121.16 57.89 TJ328-0056* 145.64 73.393⁄4 3⁄4 11⁄2 4 TJ328-0027 154.35 76.89 TJ328-0037 183.26 83.89 TJ328-0047 177.50 89.39 TJ328-0057 206.42 103.891 1 11⁄2 4 TJ328-0028 285.87 125.89 TJ328-0038 328.50 146.89 TJ328-0048 328.76 166.89 TJ328-0058 371.39 174.89

High-Performance CarbideRoughing End MillsTiN & TiAIN Coated • 4 Flute Centercutting

MASTERmill™ Series CRS—designed for maximum stock removal in steel alloys, mild steel and stainless steel operations.TiN Coated•Provides increase of 25 to 30% in machining speeds vs. uncoated toolsTiAIN Coated•Recommended for difficult-to-machine materials •Provides increase of 75 to 100% in machining speeds vs. uncoated tools

TiN Coated

TiAIN Coated

Mill Shank Flute TiN Coated Mfr's Sale TiAIN Coated Mfr's SaleDia. Dia. Length OAL Model # List Price Model # List Price3⁄8" 3⁄8" 3⁄8" 2" TJ327-1514 $77.41 $39.99 TJ327-1532 $92.71 $48.793⁄8 3⁄8 7⁄8 21⁄2 TJ327-1515 81.87 42.99 TJ327-1533 98.04 51.591⁄2 1⁄2 1⁄2 21⁄2 TJ327-1516 104.13 54.79 TJ327-1534 124.72 65.591⁄2 1⁄2 1 3 TJ327-1517 111.97 58.89 TJ327-1535 134.10 70.495⁄8 5⁄8 11⁄4 31⁄2 TJ327-1519 168.37 88.59 TJ327-1537 201.64 106.093⁄4 3⁄4 3⁄4 31⁄2 TJ327-1520 189.56 104.19 TJ327-1538 227.01 124.793⁄4 3⁄4 11⁄2 4 TJ327-1521 206.04 113.29 TJ327-1539 246.76 135.69

Starting At

$3999Starting At

$3999SAVE

UP TO

48%

M-42 Cobalt Double End Mills2 & 4 Flute

$1499As Low As

$1499

2 Flute 4 FluteMill Shank Flute List 522 Flute List 452 Mfr's SaleDia. Dia. Length OAL Model # Length OAL Model # List Price1⁄8" 3⁄8" 3⁄8" 31⁄16" TJ319-1589 3⁄8" 31⁄16" TJ319-2314 $39.64 $14.995⁄32 3⁄8 7⁄16 31⁄8 TJ319-1591 7⁄16 31⁄8 TJ319-2316 41.97 15.993⁄16 3⁄8 7⁄16 31⁄8 TJ319-1593 1⁄2 31⁄4 TJ319-2317 39.64 14.997⁄32 3⁄8 1⁄2 31⁄8 TJ319-1595 9⁄16 31⁄4 TJ319-2319 41.97 15.991⁄4 3⁄8 1⁄2 31⁄8 TJ319-1597 5⁄8 33⁄8 TJ319-2321 39.64 14.999⁄32 3⁄8 9⁄16 31⁄8 TJ319-1599 11⁄16 33⁄8 TJ319-2323 41.97 15.995⁄16 3⁄8 9⁄16 31⁄8 TJ319-1601 3⁄4 31⁄2 TJ319-2324 39.64 14.993⁄8 3⁄8 9⁄16 31⁄8 TJ319-1605 3⁄4 31⁄2 TJ319-2327 39.64 14.997⁄16 1⁄2 13⁄16 33⁄4 TJ319-1609 1 41⁄8 TJ319-2330 60.42 23.991⁄2 1⁄2 13⁄16 33⁄4 TJ319-1613 1 41⁄8 TJ319-2332 60.94 23.99

*LOC: 7⁄8", OAL: 3"

48-49 EH 10-11 End Mills_Layout 1 10/15/10 10:17 AM Page 2
























































































































End Mills

50


Radius Cutter Shank Reg. SaleSize Dia. Dia. Length Model # Price PriceHSS1⁄16" 7⁄16" 3⁄8" 21⁄2" TJ320-3610 $16.81 $9.993⁄32 1⁄2 3⁄8 21⁄2 TJ320-3615 18.57 10.991⁄8 5⁄8 1⁄2 3 TJ320-3620 20.76 11.995⁄32 3⁄4 1⁄2 3 TJ320-3625 22.67 12.993⁄16 7⁄8 1⁄2 31⁄8 TJ320-3630 24.95 13.991⁄4 1 1⁄2 31⁄8 TJ320-3640 29.98 16.995⁄16 11⁄8 1⁄2 31⁄4 TJ320-3650 32.98 18.993⁄8 11⁄4 1⁄2 31⁄2 TJ320-3660 37.98 21.991⁄2 11⁄2 1 41⁄8 TJ320-3675 49.98 28.998 Pc. Set: 1⁄16-3⁄8" TJ890-8852 160.98 79.00Cobalt1⁄16 7⁄16 3⁄8 21⁄2 TJ321-3610 20.08 11.993⁄32 1⁄2 3⁄8 21⁄2 TJ321-3615 22.17 12.991⁄8 5⁄8 1⁄2 3 TJ321-3620 24.15 13.995⁄32 3⁄4 1⁄2 3 TJ321-3625 25.98 14.993⁄16 7⁄8 1⁄2 31⁄8 TJ321-3630 27.98 16.791⁄4 1 1⁄2 31⁄8 TJ321-3640 32.98 19.795⁄16 11⁄8 1⁄2 31⁄4 TJ321-3650 36.98 21.993⁄8 11⁄4 1⁄2 31⁄2 TJ321-3660 42.98 25.791⁄2 11⁄2 1 41⁄8 TJ321-3675 61.98 36.998 Pc. Set: 1⁄16-3⁄8" TJ890-8853 185.98 92.99

Corner Rounding End Mills & SetsHSS & Cobalt ForBridgeport®-Type Mills

SAVE50%

On Sets

Carbide-TippedTool Bits

Ind. AL AR Sale Price Ea.Size No. Model # Model # 1-11 12+C21⁄4" 4 TJ383-7140 TJ383-7100 $3.44 $2.755⁄16 5 TJ383-7144 TJ383-7104 3.39 2.693⁄8 6 TJ383-7148 TJ383-7108 3.39 2.691⁄2 8 TJ383-7156 TJ383-7116 4.89 3.895⁄8 10 TJ383-7160 TJ383-7120 7.24 5.793⁄4 12 TJ383-7164 TJ383-7124 9.28 7.39C51⁄4 4 TJ383-7142 TJ383-7102 3.44 2.755⁄16 5 TJ383-7146 TJ383-7106 3.39 2.693⁄8 6 TJ383-7150 TJ383-7110 3.39 2.691⁄2 8 TJ383-7158 TJ383-7118 4.89 3.895⁄8 10 TJ383-7162 TJ383-7122 7.24 5.793⁄4 12 TJ383-7166 TJ383-7126 9.69 7.75

•C2 grade for cast iron and nonferrous materials • C5 grade for steel and steel alloys

Style AL•Cuts from left to right • Left hand for turning

to a square shoulderStyle AR•Cuts from right to left • Right

hand for turning to a square shoulder

$269As Low As

$269Each Qty.: 12+

SAVE20%

On 12+

Mill Shank Flute Reg. SaleDia. Dia. Length OAL Model # Price Price4 Flute1⁄4" 3⁄8" 3⁄4" 21⁄2" TJ321-7010 $9.26 $6.891⁄4 3⁄8 11⁄4 31⁄16 TJ321-7020 9.80 7.295⁄16 3⁄8 3⁄4 21⁄2 TJ321-7030 10.37 7.695⁄16 3⁄8 13⁄8 31⁄8 TJ321-7040 11.15 8.293⁄8 3⁄8 7⁄8 25⁄8 TJ321-7050 10.37 7.693⁄8 3⁄8 11⁄2 31⁄4 TJ321-7060 12.68 9.491⁄2 1⁄2 11⁄4 31⁄4 TJ321-7070 12.08 8.991⁄2 1⁄2 2 4 TJ321-7080 13.82 10.295⁄8 5⁄8 15⁄8 33⁄4 TJ321-7090 13.82 10.295⁄8 5⁄8 21⁄2 45⁄8 TJ321-7100 16.67 12.493⁄4 5⁄8 15⁄8 37⁄8 TJ321-7110 16.10 11.993⁄4 5⁄8 3 51⁄8 TJ321-7120 20.51 15.293⁄4 3⁄4 3 51⁄4 TJ321-7140 20.15 15.095 Flute7⁄8 3⁄4 17⁄8 41⁄8 TJ321-7150 20.51 15.291 3⁄4 2 41⁄2 TJ321-7190 24.14 18.091 1 2 41⁄2 TJ321-7192 24.74 18.491 1 4 61⁄2 TJ321-7200 24.98 18.6911⁄8 1 2 41⁄2 TJ321-7210 27.98 20.986 Flute11⁄4 3⁄4 4 61⁄2 TJ321-7220 41.98 31.3911⁄4 11⁄4 3 51⁄2 TJ321-7240 31.98 29.9911⁄4 11⁄4 4 61⁄2 TJ321-7250 41.98 31.2911⁄2 11⁄4 4 61⁄2 TJ321-7290 67.95 61.9513⁄4 11⁄4 4 61⁄2 TJ321-7310 77.98 58.392 11⁄4 2 41⁄2 TJ321-7330 86.98 65.192 2 6 93⁄4 TJ321-7385 138.98104.29

Coarse Tooth•M2 steel andaluminum alloy

M2-AL RoughingEnd Mills

$689Starting At

$689

SAVEUP TO

25%

$649As Low As

$649

•Centercutting•Solid micrograin carbide

2 & 4 Flute CarbideDouble End MillsStub & Regular Lengths

Mill Shank Flute 2 Flute 4 Flute Reg. SaleDia. Dia. Length OAL Model # Model # Price Price1⁄16" 1⁄8" 1⁄8" 11⁄2" TJ322-7004 TJ322-8004 $13.79 $7.593⁄32 1⁄8 3⁄16 11⁄2 TJ325-2222 TJ325-2227 13.79 7.991⁄8 1⁄8 1⁄4 11⁄2 TJ322-7008 TJ322-8008 8.54 6.491⁄8 3⁄16 1⁄4 2 TJ326-1838 TJ326-0049 13.96 8.691⁄8 3⁄8 3⁄8 31⁄16 TJ325-2485 TJ325-2493 26.98 19.995⁄32 3⁄16 5⁄16 2 TJ325-2223 TJ325-2228 15.18 8.995⁄32 3⁄8 7⁄16 31⁄8 TJ325-2486 TJ325-2494 26.98 16.993⁄16 3⁄8 1⁄2 31⁄4 TJ325-2487 TJ325-2495 26.98 17.993⁄16 3⁄16 3⁄8 2 TJ322-7012 TJ322-8012 14.15 8.991⁄4 1⁄4 1⁄2 21⁄2 TJ322-7016 TJ322-8016 16.12 10.491⁄4 3⁄8 5⁄8 31⁄2 TJ325-2488 TJ325-2497 26.98 23.995⁄16 5⁄16 1⁄2 21⁄2 TJ322-7020 TJ322-8020 20.06 16.995⁄16 3⁄8 3⁄4 31⁄2 TJ325-2489 TJ325-2498 30.98 26.993⁄8 3⁄8 9⁄16 21⁄2 TJ322-7024 TJ322-8024 21.33 18.993⁄8 3⁄8 3⁄4 31⁄2 TJ325-2490 TJ325-2499 30.98 28.991⁄2 1⁄2 5⁄8 3 TJ322-7032 TJ322-8032 35.98 26.991⁄2 1⁄2 1 4 TJ325-2491 TJ325-2500 45.98 39.99

SAVEUP TO

45%

TiN ATUNCOATED

PRICES

Uncoated

Cobalt Roughing End MillsUncoated & TiN Coated

Coarse Tooth •For heavy cuts, deep slotting

and side milling•Staggered tooth design for

min. chip load

TiN Coated

Mill Shank Flute No. of Uncoated Reg. TiN Coated Reg. SaleDia. Dia. Length OAL Flutes Model # Price Model # Price Price1⁄4" 3⁄8" 5⁄8" 27⁄16" 3 TJ320-7110 $13.28 TJ320-7310 $14.77 $6.891⁄4 3⁄8 7⁄8 211⁄16 3 TJ325-4018 13.28 TJ307-3219 21.44 6.895⁄16 3⁄8 3⁄4 21⁄2 3 TJ320-7120 13.28 TJ320-7320 16.24 6.893⁄8 3⁄8 3⁄4 21⁄2 4 TJ320-7130 13.28 TJ320-7330 14.77 6.893⁄8 3⁄8 11⁄8 215⁄16 4 TJ891-4678 14.92 TJ325-4113 24.51 6.891⁄2 1⁄2 5⁄8 25⁄8 4 TJ325-4020 16.68 TJ307-3220 26.98 8.991⁄2 1⁄2 1 3 4 TJ891-4679 16.49 TJ325-4114 21.86 8.991⁄2 1⁄2 11⁄4 31⁄4 4 TJ320-7140 17.15 TJ320-7340 19.75 9.891⁄2 1⁄2 15⁄8 35⁄8 4 TJ325-4021 20.49 TJ307-3221 26.98 10.991⁄2 1⁄2 2 4 4 TJ321-1540 22.46 TJ320-1793 24.98 14.295⁄8 5⁄8 11⁄4 33⁄8 4 TJ325-4023 20.07 TJ325-4115 25.98 10.995⁄8 5⁄8 15⁄8 33⁄4 4 TJ320-7150 21.41 TJ320-7350 24.40 11.193⁄4 5⁄8 15⁄8 37⁄8 4 TJ320-7160 24.40 TJ890-9543* 33.98 14.393⁄4 3⁄4 11⁄4 31⁄2 4 TJ891-4681 22.88 TJ325-4116 30.98 14.393⁄4 3⁄4 15⁄8 37⁄8 4 TJ320-7170 24.98 TJ320-7360 28.98 14.393⁄4 3⁄4 3 51⁄4 4 TJ321-1570 31.98 TJ307-3730 36.98 17.897⁄8 3⁄4 17⁄8 41⁄8 5 TJ320-7180 32.98 TJ320-7365† 39.98 18.191 3⁄4 2 41⁄4 5 TJ320-7200 36.98 TJ320-7370 40.98 19.991 1 2 41⁄2 5 TJ320-7210 37.98 TJ320-7380 44.98 19.991 1 3 51⁄2 5 TJ325-4025 47.98 TJ307-3731 54.98 25.991 1 4 61⁄2 5 TJ321-1610 49.98 TJ890-9643 57.98 28.5911⁄4 11⁄4 4 61⁄2 6 TJ321-1620 68.98 TJ890-8855 82.98 46.4911⁄2 11⁄4 4 61⁄2 6 TJ321-1630 93.98 TJ890-8856 109.98 52.59

* 33⁄4" OAL † 7⁄8" shank

$689Starting At

$689

SAVEUP TO

70%

50-51 EH 10-11 End/Saws_Layout 1 10/15/10 10:18 AM Page 1
























































































































































Saws, Broaches & Burs

HSS Keyway Broach Sets

•Sets include all necessary shims No. 00 Precision SetCuts 15 different keyways for small keyways and bores. Consists of: 3 broaches: A—1⁄16, 3⁄32, 1⁄8"; 5 collared bushings: A—1⁄4, 5⁄16, 3⁄8, 7⁄16 and 1⁄2"No. 10 Standard SetCuts 18 different keyways. Consists of: 4 broaches: 1⁄8 B, 3⁄16 B, 1⁄4 C, 3⁄8" C; 9 collared bushings: B—1⁄2, 5⁄8, 3⁄4, 7⁄8" and C—1, 11⁄8, 11⁄4, 13⁄8 and 11⁄2"No. 10-10A Combination Set Cuts 36 different keyways. Consists of: 4 broaches:B—1⁄8 and 3⁄16", C—1⁄4 and 3⁄8"; 18 collared bushings:B—1⁄2, 9⁄16, 5⁄8, 11⁄16, 3⁄4, 13⁄16 and 7⁄8"; C—15⁄16, 1, 11⁄16,11⁄8, 13⁄16, 11⁄4, 15⁄16, 13⁄8, 17⁄16, 11⁄2 and 1 9⁄16" No. 20 Combination Set Cuts 47 different keyways. Consists of: 5 broaches: B—1⁄8 and 3⁄16", C—1⁄4, 5⁄16 and 3⁄8"; 18 collared bushings:B—1⁄2, 9⁄16, 5⁄8, 11⁄16, 3⁄4, 13⁄16 and 7⁄8"; C—15⁄16, 1, 11⁄16,11⁄8, 13⁄16, 11⁄4, 15⁄16, 13⁄8, 17⁄16, 11⁄2 and 1 9⁄16"

SAVEUP TO

24%

Ind. Import Reg. Sale duMONT Mfr's SaleNo. Model # Price Price Model # List Price00 TJ307-2793 $87.98 $78.99 TJ395-0100 $177.00 $159.0010 TJ307-2794 156.98 118.99 TJ395-0200 309.00 278.0010-10A TJ307-2795 201.98 178.99 TJ395-0300 396.00 356.0020 TJ307-2796 231.98 198.99 TJ422-1484 454.00 408.00

Import duMONT

$789 9As Low As

$789 9

•1⁄8 to 1" capacity • Self-centering • Forged and hardened steel frame•Three-point support prevents

smallest diameter stock from bending •Straight tooth, fine pitch (33 tpi) knurl size•1⁄2" dia. x 1⁄4" wide x 3⁄16" hole (EQ series)

Hand Knurler

SAVE31%$2595


$2595Reg. Price$37.98

Bi-MetalBandsaw Blades100' Coils

Bi-metal blades cut faster and last up to 10x longer than carbon steel blades.•.025" thickness Variable Tooth - Combines more than 1 pitchtooth to an inch. Reduces vibration and chatter.Raker Tooth - Rake angle is 0°. Use for contourand straight cut-off work.

SAVEUP TO

25%$21549Starting At

$21549Reg. Sale

Width TPI Model # Price PriceVariable Tooth1⁄4" 10-14 TJ371-0490 $288.98 $215.493⁄8 10-14 TJ371-0492 285.98 215.491⁄2 10-14 TJ371-0496 285.98 215.493⁄4 6-10 TJ371-0497 315.98 238.393⁄4 10-14 TJ371-0498 315.98 238.39Raker Tooth1⁄2 14 TJ371-0495 285.98 215.49

Bi-Metal Hole Saw KitsAssembled from superior bi-metal hole saws, together with arbors.•Master Cobalt® bi-metal design uses an

electron beam to weld M3 high-speedsteel cutting edge to a tough steel backer.11⁄2" cutting depth

Mechanic’s Kit— 7⁄8, 1, 11⁄8, 11⁄4 & 11⁄2"saws, arbor to fit 3⁄8" chuck size. Maintenance Kit— 3⁄4, 7⁄8, 11⁄8, 13⁄8, 11⁄2,13⁄4, 2, 21⁄4 & 21⁄2" saws, 3 arbors for 1⁄4"and 1⁄2" chuck size, and 1⁄2" pin drive chuck size, 12" extension.Electrician’s Kit— 7⁄8, 11⁄8, 13⁄8, 13⁄4, 2 &21⁄2" saws, 2 arbors for 1⁄2" chuck size. Plumber’s Kit — 3⁄4, 7⁄8, 11⁄8, 11⁄2, 13⁄4& 21⁄4" saws, 2 arbors for 1⁄2" standard & pin chuck size.Industrial Kit— 3⁄4, 7⁄8, 11⁄8, 13⁄8, 11⁄2, 13⁄4,2, 21⁄4, 21⁄2, 3, 31⁄4, 35⁄8, 33⁄4, 41⁄4 & 41⁄2"saws, 3 arbors for 1⁄4" & 1⁄2" chuck size, 12" extension.

Reg. SaleKit Model # Price PriceMechanic TJ990-0589 $50.98 $29.95Maintenance TJ371-4095 140.98 69.95Electrician TJ990-0591 102.98 51.95Plumber TJ990-0592 98.98 49.95Industrial TJ990-0593* 293.98 145.95

*Steel carrying case

High-density polyethylene case included

$2995Starting At

$2995SAVE

UP TO

50%

$629Starting At

$629

Carbide 1⁄4" Shank BursSingle & Double Cut

•Hardened steel shanks except 1⁄4" and3⁄16" dia., which are solid carbide

Industry Cutter Cutter Single Cut Double Cut Reg. SaleNumber Dia. Length Model # Model # Price PriceA. Cylindrical Ball Nose BursSC-1 1⁄4" 5⁄8" TJ317-0267 TJ317-0276 $13.54 $7.49SC-3 3⁄8 3⁄4 TJ317-0269 TJ317-0278 18.24 9.99SC-5 1⁄2 1 TJ317-0271 TJ317-0280 28.98 15.99B. Cylindrical BursSA-1 1⁄4 5⁄8 TJ317-0210 TJ317-0220 11.64 6.49SA-3 3⁄8 3⁄4 TJ317-0212 TJ317-0222 16.68 8.99SA-5 1⁄2 1 TJ317-0214 TJ317-0224 25.59 13.99C. Cylindrical End Cut BursSB-1 1⁄4 5⁄8 TJ317-0231 TJ317-0237 12.60 6.29SB-5 1⁄2 1 TJ317-0234 TJ317-0241 28.66 15.99D. 14° Included Angle BursSL-1 1⁄4 5⁄8 TJ317-0326 TJ317-0332 14.75 7.39SL-3 3⁄8 11⁄16 TJ317-0328 TJ317-0334 23.24 12.99SL-4 1⁄2 11⁄8 TJ317-0329 TJ317-0335 27.98 14.99E. Ball Shape BursSD-14 3⁄16 1⁄8 TJ317-0245 TJ317-0255 12.46 6.29SD-1 1⁄4 7⁄32 TJ317-0246 TJ317-0256 12.46 6.29SD-3 3⁄8 5⁄16 TJ317-0248 TJ317-0258 15.27 8.49SD-5 1⁄2 7⁄16 TJ317-0250 — 20.56 10.99

A

B

C

D

E

SAVEUP TO

50%

50-51 EH 10-11 End/Saws_Layout 1 10/15/10 10:18 AM Page 2



















































Drills

52

It's IN STOCK and

Flute Mfr's SaleSize L OAL Model # List Price9⁄32" 21⁄4" 33⁄4" TJ240-6961 $5.36 $2.6119⁄64 23⁄8 37⁄8 TJ240-6962 5.82 2.835⁄16 21⁄2 4 TJ240-6963 5.98 2.9121⁄64 29⁄16 41⁄16 TJ240-6964 6.66 3.2411⁄32 25⁄8 41⁄8 TJ240-6965 7.48 3.6423⁄64 211⁄16 43⁄16 TJ240-6966 8.50 4.133⁄8 211⁄16 41⁄4 TJ240-6967 8.73 4.2425⁄64 23⁄4 45⁄16 TJ240-6968 9.86 4.7913⁄32 213⁄16 43⁄8 TJ240-6969 10.13 4.9327⁄64 27⁄8 47⁄16 TJ240-6970 11.20 5.447⁄16 215⁄16 41⁄2 TJ240-6971 12.05 5.8629⁄64 3 45⁄8 TJ240-6972 13.87 6.7415⁄32 31⁄8 43⁄4 TJ240-6973 14.03 6.8331⁄64 31⁄4 47⁄8 TJ240-6974 14.75 7.181⁄2 33⁄8 5 TJ240-6975 14.99 7.29

Black Oxide•Three-flat shank

design on sizesover 11⁄64" provides a positive grip inconventionalpower tools

Flute Mfr's SaleSize L OAL Model # List Price1⁄16" 7⁄8" 17⁄8" TJ240-6947 $1.75 $.855⁄64 1 2 TJ240-6948 1.75 .853⁄32 11⁄4 21⁄4 TJ240-6949 1.87 .887⁄64 15⁄16 23⁄8 TJ240-6950 1.87 .881⁄8 17⁄16 21⁄2 TJ240-6951 2.13 .989⁄64 19⁄16 25⁄8 TJ240-6952 2.13 .985⁄32 111⁄16 23⁄4 TJ240-6953 2.34 1.1411⁄64 113⁄16 27⁄8 TJ240-6954 2.49 1.183⁄16 17⁄8 3 TJ240-6955 2.83 1.3713⁄64 115⁄16 31⁄8 TJ240-6956 3.06 1.497⁄32 2 31⁄4 TJ240-6957 3.37 1.6415⁄64 21⁄16 33⁄8 TJ240-6958 3.62 1.761⁄4 2 31⁄2 TJ240-6959 3.88 1.8917⁄64 21⁄8 35⁄8 TJ240-6960 4.77 2.31

Trinado™ HSS 135°Split Point Mechanic'sLength Drills

85¢As Low As

85¢

SAVEUP TO

54%

Reg. SaleMaterial Brand Point Model # Price PriceHSS Heavy-Duty Enco 135° TJ300-0057 $69.98 $45.95HSS TiN Coated Enco 118 TJ300-0049 79.98 55.95HSS TiN Coated Enco 135 TJ300-0056 91.98 63.95HSS Polished Flute Triumph 118 TJ240-6490 271.98 199.00HSS Surface Treated Triumph 118 TJ240-6491 271.98 199.00

115 Pc. 3-In-1 HSSJobber Drill Sets•Sizes: 1⁄16-1⁄2" by 64ths, 1-60, A-Z •Steel index case

$4595Starting At

$4595

Screw Machine Length Drill Sets

$7595As Low As

$7595

•118° point for quick penetration • 135° self-centering split point prevents “walking” • Case included

Drill Mfr's SaleMaterial Point Grade Model # List Price26 Pc. Drill Sets, A-ZHSS Bright 118° General Purpose TJ317-9913 $262.00 $105.95Cobalt 135 Split Heavy-Duty TJ317-9918 434.00 195.9529 Pc. Drill Sets, 1⁄16-1⁄2" x 64thsHSS Bright 118 General Purpose TJ317-9912 233.00 99.95HSS Black Oxide 135 Split Heavy-Duty TJ317-9915 231.00 95.95Cobalt 135 Split Heavy-Duty TJ317-9919 384.00 170.9560 Pc. Drill Sets, #60-1 Wire Gage HSS Bright 118 General Purpose TJ317-9914 199.00 75.95HSS Black Oxide 135 Split Heavy-Duty TJ317-9916 195.00 85.95Cobalt 135 Split Heavy-Duty TJ317-9917 296.00 129.95

SAVEUP TO

61%

29 Pc. BlackOxide Set

HSS Silver & Deming Drill Sets

•1⁄2" shank

Mfr's SaleSet Brand Sizes Model # List Price5 Pc. Enco 17⁄32, 9⁄16, 5⁄8, 3⁄4 & 1" TJ301-0205 $40.98 $16.958 Pc. Enco 9⁄16-1 x 16ths TJ301-0210 56.98 25.9517 Pc. Enco 17⁄32-11⁄32 x 32nds TJ301-0230 126.98 62.9532 Pc. Enco 33⁄64-1 x 64ths TJ301-0220 169.98 107.958 Pc. USA 9⁄16-1 x 16ths TJ325-6234 227.98 99.9533 Pc. USA 1⁄2-1 x 64ths TJ325-6235 714.98 299.958 Pc. Triumph 9⁄16-1 x 16ths TJ240-6548 331.53 109.958 Pc. Triumph ThunderBit® 9⁄16-1 x 16ths TJ240-6946* 418.05 155.9533 Pc. Triumph 1⁄2-1 x 64ths TJ240-6549 1,305.17 425.9533 Pc. Triumph ThunderBit® 1⁄2-1 x 64ths TJ240-6550* 1,551.22 569.95

SAVEUP TO

67%

*With flatted shank

$1695Starting At

$1695

SAVEUP TO

65%

Cobalt 135° Split PointHeavy-Duty Jobber DrillsCobaltFor use in high-tensilealloys, titanium, Inconeland high-nickel stainless steels.

Size Pkg. Qty.1⁄32–17⁄64" 125⁄16–1⁄2" 6

Packaging $125Starting At

$125

Price EachFlute Mfr's Sale

Size L OAL Model # List Price1⁄16" 7⁄8" 17⁄8" TJ317-8366* $3.42 $1.251⁄8 15⁄8 23⁄4 TJ317-8370 4.37 1.595⁄32 2 31⁄8 TJ317-8372 4.94 1.913⁄16 25⁄16 31⁄2 TJ317-8374 5.81 2.357⁄32 21⁄2 33⁄4 TJ317-8376 7.68 2.691⁄4 23⁄4 4 TJ317-8378 8.62 3.0917⁄64 27⁄8 41⁄8 TJ317-8379 9.85 3.695⁄16 33⁄16 41⁄2 TJ317-8382 13.45 4.993⁄8 35⁄8 5 TJ317-8386 18.55 7.197⁄16 41⁄16 51⁄2 TJ317-8390 25.05 9.691⁄2 41⁄2 6 TJ317-8394 31.20 12.79

*Sold inpackagequantityof 12 only.

Self-Starting Single Hole Step Drill Bits

•Exclusive single radial concave flute•Allows drilling of perfectly round holes in

thin materials, quickly and with less effort•Industrial-grade, high-speed

molybdenum steel • HRC 61-63

Hole Shank Mfr's SaleSize Size Model # List Price3⁄8" 1⁄4" TJ319-1437 $21.91 $11.951⁄2 1⁄4 TJ319-1435 27.23 14.987⁄8 3⁄8 TJ319-1436 56.18 29.9511⁄8 1⁄2 TJ319-1438 72.37 39.4917⁄32 1⁄2 TJ319-1439 82.26 44.95

SAVEUP TO

46%

SAVEUP TO

34%

52-53 EH 10-11 Drills_Layout 1 10/15/10 10:21 AM Page 1





































































READY TO SHIP!


Drills

HSS 29 Pc. ScrewMachine Length Drill Set118º Point

•1⁄16-1⁄2" x 64ths • Production grade


$4399Reg. Price$87.98

SAVE50%

Price EachFlute Less Than Pkg.

Size L OAL Model # Pkg. Qty. Qty.1⁄16" 5⁄8" 15⁄8" TJ240-6907 $1.11 $.783⁄32 3⁄4 13⁄4 TJ240-6909 1.11 .787⁄64 13⁄16 113⁄16 TJ240-6910 1.11 .781⁄8 7⁄8 17⁄8 TJ240-6911 1.11 .789⁄64 15⁄16 115⁄16 TJ240-6912 1.17 .825⁄32 1 21⁄16 TJ240-6913 1.29 .9011⁄64 11⁄16 21⁄8 TJ240-6914 1.34 .943⁄16 11⁄8 23⁄16 TJ240-6915 1.51 1.0613⁄64 13⁄16 21⁄4 TJ240-6916 1.73 1.217⁄32 11⁄4 23⁄8 TJ240-6917 1.96 1.3715⁄64 15⁄16 27⁄16 TJ240-6918 2.07 1.451⁄4 13⁄8 21⁄2 TJ240-6919 2.09 1.4617⁄64 17⁄16 25⁄8 TJ240-6920 2.60 1.829⁄32 11⁄2 211⁄16 TJ240-6921 2.75 1.9219⁄64 19⁄16 23⁄4 TJ240-6922 3.10 2.175⁄16 15⁄8 213⁄16 TJ240-6923 3.31 2.3221⁄64 111⁄16 215⁄16 TJ240-6924 3.95 2.763⁄8 113⁄16 31⁄8 TJ240-6927 4.80 3.3613⁄32 115⁄16 35⁄16 TJ240-6929 6.05 4.237⁄16 21⁄16 37⁄16 TJ240-6931 6.62 4.6315⁄32 21⁄8 35⁄8 TJ240-6933 8.01 5.611⁄2 21⁄4 33⁄4 TJ240-6935 8.27 5.79

ThunderBit® HSS135° ScrewMachine Drills

Size Pkg. Qty.1⁄16–9⁄32" 1219⁄64–1⁄2" 6

Packaging

•Friction-reducing black and bronze oxide surface treatments

•Heavy-duty core construction •Unique spiral design improves chip

ejection and coolant flow to point

•Ideal for use inmedium- to high-tensilestrength alloymaterials

SAVE30%In Pkg. Qty.

78¢As Low As

78¢Each inPkg. Qty.

•HSS, 118° point •1⁄8-1⁄2" x 64ths •Metal stand

25 Pc. 8"Long Drill Set


$9595Reg. Price$214.98

HSS 118° SurfaceTreated JobberDrills

Black oxide reduces the amount of chip welding, increases abrasion resistance and improves the chip flow.

Price EachFlute Less Than Pkg.

Size L OAL Model # Pkg. Qty. Qty. 1⁄64" 3⁄16" 3⁄4" TJ300-0101* $.86 $.64

1⁄32 1⁄2 13⁄8 TJ300-0102* .56 .423⁄64 3⁄4 13⁄4 TJ300-0103* .59 .441⁄16 7⁄8 17⁄8 TJ300-0104* .56 .425⁄64 1 2 TJ300-0105* .56 .423⁄32 11⁄4 21⁄4 TJ300-0106* .57 .437⁄64 11⁄2 25⁄8 TJ300-0107 .56 .421⁄8 15⁄8 23⁄4 TJ300-0108 .56 .429⁄64 13⁄4 27⁄8 TJ300-0109 .59 .445⁄32 2 31⁄8 TJ300-0110 .62 .4611⁄64 21⁄8 31⁄4 TJ300-0111 .67 .503⁄16 25⁄16 31⁄2 TJ300-0112 .77 .5813⁄64 27⁄16 35⁄8 TJ300-0113 .85 .647⁄32 21⁄2 33⁄4 TJ300-0114 1.00 .7515⁄64 25⁄8 37⁄8 TJ300-0115 1.04 .781⁄4 23⁄4 4 TJ300-0116 1.04 .7817⁄64 27⁄8 41⁄8 TJ300-0117 1.32 .999⁄32 215⁄16 41⁄4 TJ300-0118 1.39 1.0419⁄64 31⁄16 43⁄8 TJ300-0119 1.55 1.165⁄16 33⁄16 41⁄2 TJ300-0120 1.66 1.2421⁄64 35⁄16 45⁄8 TJ300-0121 1.97 1.4811⁄32 37⁄16 43⁄4 TJ300-0122 2.18 1.6323⁄64 31⁄2 47⁄8 TJ300-0123 2.38 1.783⁄8 35⁄8 5 TJ300-0124 2.40 1.8025⁄64 33⁄4 51⁄8 TJ300-0125 2.90 2.1713⁄32 37⁄8 51⁄4 TJ300-0126 3.03 2.2727⁄64 315⁄16 53⁄8 TJ300-0127 3.23 2.427⁄16 41⁄16 51⁄2 TJ300-0128 3.34 2.5029⁄64 43⁄16 55⁄8 TJ300-0129 3.83 2.8715⁄32 45⁄16 53⁄4 TJ300-0130 4.03 3.0231⁄64 43⁄8 57⁄8 TJ300-0131 4.10 3.071⁄2 41⁄2 6 TJ300-0132 4.16 3.12

Size Pkg. Qty.1⁄64–25⁄64" 1213⁄32–1⁄2" 6

Packaging

SAVE25%In Pkg. Qty.

42¢As Low As

42¢Each

HSS TiN Tipped118˚ Jobber Drills•118˚ radial special pointTiN TippedIncreases lubricity and heat resistance. Same benefits of TiN at a fraction of the cost

Flute Mfr's SaleSize L OAL Model # List Price1⁄16" 7⁄8" 17⁄8" TJ327-3736* $2.19 $1.053⁄32 11⁄4 21⁄4 TJ327-3738 2.32 1.097⁄64 11⁄2 25⁄8 TJ327-3739 2.47 1.211⁄8 15⁄8 23⁄4 TJ327-3740 2.47 1.219⁄64 13⁄4 27⁄8 TJ327-3741 2.72 1.295⁄32 2 31⁄8 TJ327-3742 2.75 1.3911⁄64 21⁄8 31⁄4 TJ327-3743 2.87 1.393⁄16 25⁄16 31⁄2 TJ327-3744 3.29 1.5913⁄64 27⁄16 35⁄8 TJ327-3745 3.69 1.797⁄32 21⁄2 33⁄4 TJ327-3746 4.06 1.9915⁄64 25⁄8 37⁄8 TJ327-3747 4.41 2.091⁄4 23⁄4 4 TJ327-3748 4.71 2.2917⁄64 27⁄8 41⁄8 TJ327-3749 5.64 2.699⁄32 215⁄16 41⁄4 TJ327-3750 5.87 2.7919⁄64 31⁄16 43⁄8 TJ327-3751 6.77 3.395⁄16 33⁄16 41⁄2 TJ327-3752 7.50 3.5911⁄32 37⁄16 43⁄4 TJ327-3754 9.22 4.493⁄8 35⁄8 5 TJ327-3756 10.75 5.1913⁄32 37⁄8 51⁄4 TJ327-3758 12.50 6.097⁄16 41⁄16 51⁄2 TJ327-3760 14.45 7.0915⁄32 45⁄16 53⁄4 TJ327-3762 17.20 8.391⁄2 41⁄2 6 TJ327-3764 18.30 8.99

SAVEUP TO

53%

*Bright Finish

•Ideal for drilling through wood, composition board and even plexiglass•Handle thicker materials by drilling from both sides of work surface•Self-starting tip creates perfectly round holes without center punching

3 Pc. HSS & TiN Coated Step Drill SetsUp To 13 Different Hole Sizes Without Changing Bits

For Steel, Copper, Brass,Aluminum & OtherThin Materials

SizesHole No. of Shank StepSizes Hole Sizes Size Thick.1⁄8-1⁄2" 13 1⁄4" 1⁄8"3⁄16-1⁄2 6 1⁄4 3⁄81⁄4-3⁄4 9 3⁄8 1⁄8

SAVEUP TO

61%$2995As Low As

$2995

TiN CoatedHSS Mfr's Sale HSS Mfr's Sale

Set Model # List Price Model # List PriceIrwin TJ302-1110 $103.58 $39.99 TJ890-9243 $138.06 $53.99Import TJ890-9613 40.98 29.95 TJ890-9614 57.98 39.95

$105As Low As

$105

*Sold in package quantity only.

SAVE55%

52-53 EH 10-11 Drills_Layout 1 10/15/10 10:21 AM Page 2



















































































Drills/Reamers/Countersinks

54


Screw Machine Drills

HSS 118° &Cobalt 135°

Each InPkg. Qty.

HSS Sale Price Ea. Cobalt Sale Price Ea.Flute 118° Less Than Pkg. 135° Less Than Pkg.

Size L OAL Model # Pkg. Qty. Qty. Model # Pkg. Qty. Qty.1⁄16" 5⁄8" 15⁄8" TJ302-1004** $.59 $.41 TJ302-2004** $.80 $.561⁄8 7⁄8 17⁄8 TJ302-1008 .59 .41 TJ302-2008 .88 .623⁄16 11⁄8 23⁄16 TJ302-1012 .80 .56 TJ302-2012 1.17 .827⁄32 11⁄4 23⁄8 TJ302-1014 1.03 .72 TJ302-2014 1.39 .971⁄4 13⁄8 21⁄2 TJ302-1016 1.10 .77 TJ302-2016* 1.53 1.079⁄32 11⁄2 211⁄16 TJ302-1018 1.46 1.02 TJ325-6310* 1.90 1.335⁄16 15⁄8 213⁄16 TJ302-1020 1.73 1.21 TJ302-2020 2.29 1.603⁄8 113⁄16 31⁄8 TJ302-1024 2.54 1.78 TJ302-2024 3.23 2.267⁄16 21⁄16 37⁄16 TJ302-1028 3.50 2.45 TJ302-2028 4.35 3.041⁄2 21⁄4 33⁄4 TJ302-1032 5.83 4.08 TJ302-2032 5.24 3.67

*118° Point **Sold in packages of 12 only

41¢As Low As

41¢

SAVE30%In Pkg. Qty.

HSS 118° Jobber DrillsBright Finish & Black Oxide Coated

•Light industrial/maintenance grade

•Provides good wear resistance in mild steels, soft metals (aluminum, copper, brass, bronze) and nonferrous materials

•Bright (polished) finish improves chip flow of soft and low-carbon materials

•Black oxide retains lubricantsto aid in wear resistance and chip flow

Black OxideCoated

Bright Black Oxide Price EachFlute Finish Coated Less Than Pkg.

Size L OAL Model # Model # Pkg. Qty.1⁄16" 7⁄8" 17⁄8" TJ326-1843 TJ240-6518 $.95 $.663⁄32 11⁄4 21⁄4 TJ326-1845 TJ240-6520 .95 .667⁄64 11⁄2 25⁄8 TJ326-1846 TJ240-6521 1.06 .741⁄8 15⁄8 23⁄4 TJ326-1847 TJ240-6522 1.09 .769⁄64 13⁄4 27⁄8 TJ326-1848 TJ240-6523 1.11 .785⁄32 2 31⁄8 TJ326-1849 TJ240-6524 1.14 .8011⁄64 21⁄8 31⁄4 TJ326-1850 TJ240-6525 1.33 .933⁄16 25⁄16 31⁄2 TJ326-1851 TJ240-6526 1.45 1.0113⁄64 27⁄16 35⁄8 TJ326-1852 TJ240-6527 1.61 1.131⁄4 23⁄4 4 TJ326-1855 TJ240-6530 2.04 1.4317⁄64 27⁄8 41⁄8 TJ326-1856 TJ240-6531 2.45 1.719⁄32 215⁄16 41⁄4 TJ326-1857 TJ240-6532 2.59 1.817⁄16 41⁄16 51⁄2 — TJ240-6542 6.44 4.51

Size Pkg. Qty.1⁄16-19⁄64" 127⁄16" 6

Packaging

SAVEUP TO

30%In Pkg. Qty.

ThunderBit® HSS118° Silver &Deming Drills

•1⁄2" shank •6" overall length •Surface treated•Split point and

flatted shank

Flute Mfr's SaleSize L Model # List Price17⁄32" 31⁄8" TJ240-6633 $30.48 $11.959⁄16 31⁄8 TJ240-6635 31.92 12.9519⁄32 31⁄8 TJ240-6637 35.40 13.955⁄8 31⁄8 TJ240-6639 35.23 14.9521⁄32 31⁄8 TJ240-6641 37.38 15.9511⁄16 31⁄8 TJ240-6643 38.99 15.9523⁄32 31⁄8 TJ240-6645 42.41 16.953⁄4 31⁄8 TJ240-6647 42.35 17.9525⁄32 3 TJ240-6649 45.82 18.9513⁄16 3 TJ240-6651 47.60 19.9527⁄32 3 TJ240-6653 51.35 20.957⁄8 3 TJ240-6655 51.02 21.9515⁄16 3 TJ240-6659 58.04 23.9531⁄32 3 TJ240-6661 64.33 24.951 3 TJ240-6663 64.70 25.95

$1195As Low As

$1195

BrightFinish

$1599As Low As

$1599

HSS AdjustableBlade Reamer Sets

•Supplied in awooden case

SAVEUP TO

64%Size Range Sizes No. of Reg. SaleMin. Max. Included Pcs. Model # Price Price1⁄4" 3⁄8" 8/A to 5/A 4 TJ890-8857 $53.98 $18.993⁄8 15⁄32 4/A to 2/A 3 TJ890-8858 40.98 15.993⁄8 27⁄32 4/A to M 16 TJ890-9542 318.98 179.9915⁄32 11⁄16 A to H 8 TJ890-8859 114.98 65.9915⁄32 11⁄2 A to K 11 TJ334-1000 201.98 109.99

Carbide 6 Flute Countersinks60, 82 & 90°

•HSS shank

Shank 60º 82º 90º Reg. SaleSize Dia. OAL Model # Model # Model # Price Price1⁄4" 1⁄4" 2" TJ369-1501 TJ369-1511 TJ369-1521 $15.81 $9.493⁄8 1⁄4 21⁄2 TJ369-1502 TJ369-1512 TJ369-1522 23.90 14.591⁄2 1⁄4 21⁄2 TJ369-1503 TJ369-1513 TJ369-1523 28.98 17.995⁄8 3⁄8 23⁄4 TJ369-1504 TJ369-1514 TJ369-1524 47.98 28.993⁄4 3⁄8 23⁄4 TJ990-1413 TJ369-1515 TJ990-1414 53.98 32.991 1⁄2 3 TJ308-0531 TJ308-0532 TJ308-0533 86.98 63.99

SAVEUP TO

40%$949Starting At

$949

Shank Flute Finishing Reg. Sale Roughing Reg. SaleTaper Dia. Length OAL Model # Price Price Model # Price Price0 5⁄16" 2 1⁄4" 3 3⁄4" TJ891-4728 $29.98 $14.99 —1MT 7⁄16 3 5 TJ891-4729 38.98 19.49 TJ319-0285 $45.98 $22.992MT 5⁄8 3 1⁄2 6 TJ891-4730 45.98 22.99 TJ319-0286 53.98 26.993MT 7⁄8 4 1⁄4 7 1⁄4 TJ891-4731 66.98 33.49 TJ319-0287 78.98 39.494MT 1 1⁄8 5 1⁄4 8 1⁄2 TJ891-4732 102.98 51.49 TJ319-0288 122.98 61.495MT 1 1⁄2 6 1⁄4 9 3⁄4 TJ891-4733 194.98 97.49 TJ319-0289 235.98 117.996MT 2 8 1⁄2 12 1⁄4 TJ891-4734 406.98 203.49 —

HSS Morse Taper HandReamersStraight Shank, Straight Flute—Finishing

SAVE50%

$1499Starting At

$1499

66¢As Low As

66¢

SAVEUP TO

60%

Size Pkg. Qty.1⁄16-9⁄32" 125⁄16-1⁄2" 6

Packaging

54-55 EH 10-11 ReamrsCounter_Layout 1 10/15/10 10:22 AM Page 1


































































































Drills/Reamers/Countersinks

SAVE19%5 Pc. 82° HSS

Single FluteCountersink Set•Sizes: 1⁄4, 3⁄8,

1⁄2, 3⁄4 & 1"


$2995Reg. Price$36.98

HSS & Cobalt 82°& 90° Combined Drills &CountersinksPlain Type•Pkg. qty.: 12 $398

As Low As

$398Each inPkg. Qty.

SAVEUP TO

22%In Pkg. Qty.

Body Drill 82° 90° Price EachSize Dia. L OAL Model # Model # 1-11 12+HSS#1 1⁄8" 3⁄64" 11⁄4" TJ369-1764 TJ369-1780 $4.98 $3.98#2 3⁄16 5⁄64 17⁄8 TJ369-1766 TJ369-1782 5.09 3.99#3 1⁄4 7⁄64 2 TJ369-1768 TJ369-1784 5.24 4.19#4 5⁄16 1⁄8 21⁄8 TJ369-1770 TJ369-1786 5.45 4.29#5 7⁄16 3⁄16 23⁄4 TJ369-1772 TJ369-1788 8.36 6.69#6 1⁄2 7⁄32 3 TJ369-1774 TJ369-1790 12.68 10.09#7 5⁄8 1⁄4 31⁄4 TJ369-1776 TJ369-1792 17.33 13.79#8 3⁄4 5⁄16 31⁄2 TJ369-1778 TJ369-1794 24.53 19.49Cobalt#2 3⁄16 5⁄64 17⁄8 TJ369-1732 TJ369-1750 6.97 5.49#3 1⁄4 7⁄64 2 TJ369-1734 TJ369-1752 7.22 5.69#4 5⁄16 1⁄8 21⁄8 TJ369-1736 TJ369-1754 7.29 5.79#5 7⁄16 3⁄16 23⁄4 TJ369-1738 TJ369-1756 10.79 8.59#6 1⁄2 7⁄32 3 TJ369-1740 TJ369-1758 17.18 13.69#7 5⁄8 1⁄4 31⁄4 TJ369-1742 TJ369-1760 23.61 18.89#8 3⁄4 5⁄16 31⁄2 TJ369-1744 TJ369-1762 33.98 26.29

SAVEUP TO

37%HSS Chucking ReamersStraight Flute/Straight Shank•Use in turret lathes, screw

machines and drill pressesto finish holes to close toler-ances

•Ground with a 45° chamfer for gradual starting load

Flute Reg. SaleSize Length OAL Model # Price Price1⁄16" 1⁄2" 21⁄2" TJ329-1104 $10.62 $7.493⁄32 3⁄4 3 TJ329-1106 9.34 6.191⁄8 7⁄8 31⁄2 TJ329-1108 8.07 5.995⁄32 1 4 TJ329-1110 12.32 8.093⁄16 11⁄8 41⁄2 TJ329-1112 11.89 8.097⁄32 11⁄4 5 TJ329-1114 14.44 9.991⁄4 11⁄2 6 TJ329-1116 13.50 9.195⁄16 11⁄2 6 TJ329-1120 15.72 10.993⁄8 13⁄4 7 TJ329-1124 17.42 11.997⁄16 13⁄4 7 TJ329-1128 21.67 14.091⁄2 2 8 TJ329-1132 22.94 14.999⁄16 2 8 TJ990-1416 27.98 17.995⁄8 21⁄4 9 TJ990-1417 33.98 21.293⁄4 21⁄2 91⁄2 TJ990-1419 34.98 26.497⁄8 25⁄8 10 TJ990-1421 50.98 35.991 23⁄4 101⁄2 TJ990-1423 59.98 41.9911⁄4 3 111⁄2 TJ990-1425 98.98 65.9911⁄2 31⁄2 121⁄2 TJ990-1426 138.98 91.99

$599Starting At

$599

HSS & TiNCoatedCombinedDrills &Countersinks60, 82 & 90°•Included angle for

long tool life•Spiral flute

Body Drill HSS Price Each TiN Coated Price EachSize Dia. Dia. OAL Model # 1-11 12+ Model # 1-11 12+60˚ Included Angle#1 1⁄8" 3⁄64" 11⁄4" TJ369-1836 $5.06 $2.99 TJ369-1936 $8.23 $4.89#2 3⁄16 5⁄64 17⁄8 TJ369-1841 5.30 3.09 TJ369-1941 8.24 4.89#3 1⁄4 7⁄64 2 TJ369-1846 5.52 3.29 TJ369-1946 9.68 5.79#4 5⁄16 1⁄8 21⁄8 TJ369-1851 5.68 3.39 TJ369-1951 11.54 6.89#5 7⁄16 3⁄16 23⁄4 TJ369-1856 8.09 4.79 TJ369-1956 16.70 9.99#6 1⁄2 7⁄32 3 TJ369-1861 13.54 8.09 TJ369-1961 24.53 14.69#7 5⁄8 1⁄4 31⁄4 TJ369-1866 20.56 12.29 TJ369-1966 36.98 22.19#8 3⁄4 5⁄16 31⁄2 TJ369-1871 27.98 16.79 TJ369-1971 50.98 30.5982˚ Included Angle#1 1⁄8 3⁄64 11⁄4 TJ891-6766 8.64 5.19 TJ619-2264 12.28 7.29#2 3⁄16 5⁄64 17⁄8 TJ891-6767 8.86 5.29 TJ619-2265 12.44 7.39#3 1⁄4 7⁄64 2 TJ891-6768 9.17 5.49 TJ619-2266 13.91 8.29#4 5⁄16 1⁄8 21⁄8 TJ891-6769 9.50 5.69 TJ619-2267 14.27 8.49#5 7⁄16 3⁄16 23⁄4 TJ891-6770 14.51 8.69 TJ619-2268 22.03 13.19#6 1⁄2 7⁄32 3 TJ891-6771 21.95 13.09 TJ619-2269 31.98 19.19#7 5⁄8 1⁄4 31⁄4 TJ619-2276 30.98 18.59 TJ319-2108 44.98 26.99#8 3⁄4 5⁄16 31⁄2 TJ619-2277 43.98 26.39 TJ319-2109 61.98 37.1990˚ Included Angle#1 1⁄8 3⁄64 11⁄4 TJ891-6772 8.64 5.09 TJ619-2270 12.28 7.29#2 3⁄16 5⁄64 17⁄8 TJ891-6773 8.86 5.29 TJ619-2271 12.32 7.39#3 1⁄4 7⁄64 2 TJ891-6774 9.17 5.49 TJ619-2272 13.91 8.29#4 5⁄16 1⁄8 21⁄8 TJ891-6775 9.50 5.69 TJ619-2273 14.27 8.49#5 7⁄16 3⁄16 23⁄4 TJ891-6776 14.51 8.69 TJ619-2274 22.03 13.19#6 1⁄2 7⁄32 3 TJ891-6777 21.95 13.09 TJ319-2110 31.98 19.19#7 5⁄8 1⁄4 31⁄4 TJ619-2278 30.98 18.59 TJ619-2275 45.98 27.59#8 3⁄4 5⁄16 31⁄2 TJ619-2279 43.98 26.39 TJ319-2111 61.98 37.17

$299Starting At

$299

SAVE40%

On 12+

Ea. 12+

HSS 6 Flute Chatterless Countersink SetsCountersink Angles: 60º, 82º & 90°

7 Pc. Sets Include countersinks: 1⁄4, 5⁄16, 3⁄8, 1⁄2, 5⁄8, 3⁄4 and 1"Series 79•Provides good wear resistance in mild steels and nonferrous

materials such as plastics, aluminum, copper, brass, bronze, rubber and wood

•Provides the highest feed rates of all countersinks•Can be used on all types of machine setups

$7995Your Choice

$7995Mfr's List$132.16

Included Angle Model #60° TJ308-013182 TJ308-013290 TJ308-0133

•2 step hole sizes: 7⁄8 and 11⁄8"•Designed for knock-out holes for 1⁄2 and

3⁄4" conduit • 3-flat design for no chuck slip-ping • New SpeedPoint tip penetrates fasterthan previous Unibits and prevents walking

•Provides better wear resistance in hardnessand toughness compared to HSS

• For use in high-tensile alloys, titanium, cast iron, Inconel and high-nickel stainless steel

#9 Cobalt Knock-Out Bit


$5595Mfr’s List$101.63

SAVE44%

SAVE39%

54-55 EH 10-11 ReamrsCounter_Layout 1 10/15/10 10:22 AM Page 2







































































































Taps

56

The Lowest Prices in theHSS Surface Treated Fast Spiral Flute TapsPlug & Bottoming Styles

Features:•Approximately 52° helix—increases chip lifting action •Draw chips out of a hole where chip disposal is a problem•Also used to span an interruption in a keyway, slot or gap in the tapped surface•Ground thread for better surface finish and tighter tolerances•Recommended for tapping blind holes in aluminum, magnesium,

brass, copper and die-cast metalsSurface Treatments:Oxide (Blue/Black)•Prevents galling and welding•Recommended for ferrous materials (iron based)ElektraLUBE®

•Reduces torque to prevent welding, loading and galling between the tap and the workpiece

•Recommended for use in stainless steels, steel forgings, tool and die steels, hot and cold rolledsteels, high-nickel alloys, beryllium, copper andsome aluminum alloys

Thread Limit: Indicates amount above basic pitchdiameter .0005" graduations per H limit value

Oxide ElektraLUBE®

Thread Thread No. of Plug Bottoming Reg. Sale Plug Bottoming Reg. SaleSize Limit Flutes OAL Model # Model # Price Price Model # Model # Price Price4-40 H2 2 17⁄8" TJ319-7035 TJ319-7036 $15.16 $10.99 TJ319-7058 TJ319-7076 $16.08 $11.996-32 H3 2 2 TJ319-7037 TJ319-7045 11.86 7.99 TJ319-7062 TJ319-7080 12.98 8.998-32 H3 3 21⁄8 — TJ319-7046 12.34 8.99 TJ319-7063 TJ319-7081 12.98 8.9910-24 H3 3 23⁄8 — TJ319-7047 12.69 8.99 TJ319-7064 TJ319-7082 13.56 9.9910-32 H3 3 23⁄8 — TJ319-7048 11.86 7.99 TJ319-7065 TJ319-7083 13.02 8.991⁄4"-20 H3 3 21⁄2 TJ319-7039 TJ319-7049 12.89 8.99 TJ319-7066 TJ319-7084 14.16 9.995⁄16-18 H3 3 223⁄32 TJ319-7041 TJ319-7051 16.46 11.99 TJ319-7068 TJ319-7086 17.38 12.993⁄8-16 H3 3 215⁄16 TJ319-7042 TJ319-7052 19.16 13.99 TJ319-7069 TJ319-7088 20.16 14.991⁄2-13 H3 3 33⁄8 TJ319-7043 TJ319-7053 33.98 24.99 TJ319-7070 TJ319-7091 36.98 26.99

SAVEUP TO

32%

$799Starting At

$799

Oxide Plug

ElektraLUBE® Plug

Production Grade Plug Chamfer: 3-5 Threads, Bottoming Chamfer: 1-2 Threads

•General purpose taps for all commonly used materials except cast iron and brass

•Designed for the internal threading of pipes and pipe fittings•Carbon steel used for maintenance and rethreading•HSS can also be used for rethreading, but their primary application

is to cut threads•Assembly of NPT thread requires a thread sealant or Teflon® tape•Chrome not recommended for use in chromium materials

USA CoatedThread No. of Thread HSS TiN Reg. Sale HSS Chrome Reg. SaleSize Flutes Length OAL Model # Price Price Model # Price Price1⁄16-27 4 11⁄16" 21⁄8" — TJ313-1600 $18.45 $9.191⁄8-27 4 3⁄4 21⁄8 TJ325-5082 $21.72 $10.79 TJ325-5087 18.45 9.191⁄4-18 4 11⁄16 27⁄16 TJ313-3016 24.36 12.09 TJ325-5088 20.77 10.293⁄8-18 4 11⁄16 29⁄16 TJ313-3021 30.98 15.49 —1⁄2-14 4 13⁄8 31⁄8 TJ313-3026 51.98 25.99 —3⁄4-14 5 13⁄8 31⁄4 TJ313-3031 73.98 36.99 —

NPT Pipe TapsMedium Hook (Regular Projection)

Uncoated

*Supplied as .3125"diameter small shank

Carbon HSSThread No. of Thread Import Reg. Sale USA Reg. Sale Enco Reg. Sale USA Reg. SaleSize Flutes Length OAL Model # Price Price Model # Price Price Model # Price Price Model # Price Price1⁄16-27 4 11⁄16" 21⁄8" — — TJ990-1972 $8.33 $4.09 TJ313-4006 $14.84 $7.391⁄8-27SM 4 3⁄4 21⁄8 — — — TJ891-6828* 14.84 7.391⁄8-27 4 3⁄4 21⁄8 TJ325-4759 $4.08 $1.99 TJ325-4755 $5.41 $2.69 TJ313-2011 8.33 4.09 TJ313-4011 14.84 7.391⁄4-18 4 11⁄16 27⁄16 TJ325-4760 4.60 2.29 TJ325-4756 7.11 3.49 TJ422-3260 9.27 4.59 TJ313-4016 16.65 8.293⁄8-18 4 11⁄16 29⁄16 TJ325-4761 6.33 3.09 TJ325-4757 10.12 4.99 TJ422-3261 12.08 5.99 TJ313-4021 21.30 10.591⁄2-14 4 13⁄8 31⁄8 TJ325-4762 8.66 4.29 TJ325-4758 21.05 10.49 TJ422-3262 19.27 9.59 TJ313-4026 34.98 17.493⁄4-14 5 13⁄8 31⁄4 TJ325-4763 13.63 6.79 TJ326-1663 28.98 14.49 TJ313-2031 26.98 13.49 TJ313-4031 47.98 23.991-111⁄2 5 13⁄4 33⁄4 TJ327-2627 20.88 10.39 TJ319-5646 46.98 23.49 TJ313-2036 44.98 22.49 TJ313-4036 72.98 36.4911⁄4-111⁄2 5 13⁄4 4 TJ327-2629 38.98 19.49 TJ319-5647 59.98 29.99 TJ313-2041 63.98 31.99 TJ313-4041 103.98 51.9911⁄2-111⁄2 7 13⁄4 4 1⁄4 TJ327-2628 53.98 26.99 TJ319-5648 82.98 41.49 TJ313-2046 83.98 41.99 —2-111⁄2 7 13⁄4 41⁄2 — TJ319-5649 101.98 50.99 TJ313-2051 114.98 57.49 —

$199As Low As

$199

SAVE50%

HSS Fast Spiral Flute TapsPlug & Bottoming Style

Plug Chamfer: 3-5 ThreadsBottoming Chamfer: 1-2 Threads• Ground thread• Approx. 52° helix—best used on very ductile materials• Used in blind holes to draw chips out of soft, stringy materials such

as brass, copper, aluminum, magnesium, die-cast metals, etc.• Increases chip lifting action

Plug

Bottoming

Thread Thread Plug Bottoming Reg. SaleSize Limit OAL Model # Model # Price Price

4-40 H2 17⁄8" TJ314-7021 TJ314-7022 $5.96 $3.596-32 H3 2 TJ314-7051 TJ314-7052 5.45 3.598-32 H3 21⁄8 TJ314-7071 TJ314-7072 5.34 3.5910-32 H3 23⁄8 TJ314-7091 TJ314-7092 5.71 3.591⁄4"-20 H3 21⁄2 TJ314-6001 TJ314-6002 5.96 3.591⁄4-28 H3 21⁄2 TJ314-6011 TJ314-6012 5.96 3.595⁄16-18 H3 223⁄32 TJ315-6021 TJ314-6022 7.31 4.593⁄16-24 H3 222⁄32 TJ315-6031 TJ315-6032 7.31 4.593⁄8-16 H3 215⁄16 TJ315-6041 TJ315-6042 8.93 6.593⁄8-24 H3 215⁄16 TJ315-6051 TJ315-6052 8.93 6.591⁄2-13 H3 33⁄8 TJ315-6081 TJ315-6082 14.60 10.59

$359As Low As

$359

SAVEUP TO

39%

56-57 EH 10-11 Taps_Layout 1 10/15/10 10:23 AM Page 1




































































































Industry GUARANTEED!


Taps

$9595Starting At

$9595

Size Mfr’s SaleSet Range Thread Model # List Price39 Pc. 4-40 to 1⁄2 NC, NF, NPT TJ325-4751 $169.95 $95.9541 Pc. 4-40 to 1⁄2 Hex NC, NF & NPT TJ310-1306 171.27 95.9541 Pc. M3 to M12 Hex Metric TJ310-1317 190.95 105.9576 Pc. 4-40 to 1⁄2-20 NC, NF

& M3 to M12 Hex & Metric TJ310-1376 320.98 185.9553 Pc. 6-32 to 3⁄4 Hex NC, NF TJ310-1354 354.85 192.95117 Pc. 4-40 to 1⁄2-20, NC, NF, NPT

1⁄8-27, 1⁄8"-28 BSP & 3-12mm TJ307-2797 480.84 275.95

•Include die stock, tap wrenches, screwpitch gage, screwdriver and plastic case

Carbon Steel Tap & Hex Die Sets

117 Pc. Set

SAVEUP TO

45%

Grade: High Performance Material: 3% Vanadium Chamfer: 2-3 ThreadsGround Thread

Features:•Draw chips out of a hole where chip

disposal is a problem •Also used to span an interruption

in a keyway, slot or gap in thetapped surface • High helix increases chip lifting action

•Ground thread for better surface finish and tighter tolerances

List 290•45° helix • Designed for tappinghardened steel, such as 4140, 4340,H13, D2 and 1055 up to 35 HRC,as well as a variety of stainless steels

Surface Treatment:Oxide (Blue/Black)•Prevents galling and welding•Recommended for ferrous materials

(iron based)

SAVEUP TO

38%Thread Thread No. of Mfr's SaleSize Limit Flutes OAL Model # List Price2-56 H2 2 13⁄4" TJ327-2121 $35.51 $21.994-40 H2 2 17⁄8 TJ327-2123 23.44 14.494-40 H3 3 17⁄8 TJ327-2124 23.44 14.496-32 H3 3 2 TJ327-2128 19.04 11.998-32 H3 3 21⁄8 TJ327-2132 19.04 11.9910-24 H3 3 23⁄8 TJ327-2135 19.04 11.9910-32 H3 3 23⁄8 TJ327-2138 19.04 11.991⁄4"-20 H3 3 21⁄2 TJ327-2141 20.67 12.991⁄4-20 H5 3 21⁄2 TJ327-2142 20.67 12.991⁄4-28 H3 3 21⁄2 TJ327-2143 20.67 12.995⁄16-18 H3 3 223⁄32 TJ327-2146 25.39 15.993⁄8-16 H3 3 215⁄16 TJ327-2153 29.52 18.491⁄2-13 H3 3 33⁄8 TJ327-2164 51.96 31.991⁄2-13 H5 3 33⁄8 TJ327-2165 51.96 31.995⁄8-11 H3 4 313⁄16 TJ327-2169 91.52 56.99

HSS & HSS Surface Treated Spiral Flute Taps –Modified Bottoming Style

SAVEUP TO

34%HSS Spiral Point TapsPlug Style • Ground Threads

$269As Low As

$269TiN Coated

Thread H No. of Thread Bright Finish Reg. Sale Chrome-Plated Reg. Sale TiN Coated Reg. SaleSize Limit Flutes Length OAL Model # Price Price Model # Price Price Model # Price Price2-56 H2 2 7⁄16" 13⁄4" TJ313-0366 $7.57 $5.79 TJ313-1100 $10.52 $8.19 TJ313-0367 $9.47 $7.894-40 H2 2 9⁄16 17⁄8 TJ313-0376 4.88 3.69 TJ313-1102 6.91 5.19 TJ313-0375 6.67 5.096-32 H3 2 11⁄16 2 TJ313-0380 4.12 2.69 TJ313-1104 5.79 4.39 TJ313-0382 5.77 4.298-32 H3 2 3⁄4 21⁄8 TJ313-0385 4.12 3.09 TJ313-1106 5.79 4.39 TJ313-0383 5.87 4.3910-24 H3 2 7⁄8 23⁄8 TJ313-0391 4.12 3.09 TJ313-1108 5.79 4.39 TJ313-0384 6.14 4.5910-32 H3 2 7⁄8 23⁄8 TJ313-0394 4.26 3.09 TJ313-1110 5.99 4.49 TJ313-0386 6.14 4.591⁄4"-20 H3 2 1 21⁄2 TJ313-0399 3.77 2.89 TJ313-1112 6.78 4.95 TJ313-0390 6.37 4.795⁄16-18 H3 2 11⁄8 223⁄32 TJ313-0408 4.44 3.39 TJ990-1456 7.59 5.59 TJ313-0393 7.53 5.593⁄8-16 H3 3 11⁄4 215⁄16 TJ313-0415 5.29 3.99 TJ313-1116 9.59 7.39 TJ313-0398 9.53 6.291⁄2-13 H3 3 121⁄32 33⁄8 TJ313-0423 8.49 6.89 TJ313-1118 15.07 11.49 TJ313-0401 14.46 10.89

Chrome Plated

HSS Hand Tap Sets3 & 4 Flute

Sets include one each: Taper, plug, andbottoming style taps. Ground thread.

Thread Thread Thread Reg. SaleSize Limit Length OAL Model # Price Price3 Flute4-40 H2 9⁄16" 17⁄8" TJ422-2238 $15.40 $8.996-32 H3 11⁄16 2 TJ325-5042 11.70 6.994 Flute8-32 H3 3⁄4 21⁄8 TJ325-5043 12.17 6.9910-24 H3 7⁄8 23⁄8 TJ325-5044 12.47 6.9910-32 H2 7⁄8 23⁄8 TJ319-6192 13.14 6.9910-32 H3 7⁄8 23⁄8 TJ325-5045 12.47 6.991⁄4"-20 H2 1 21⁄2 TJ319-6194 13.57 7.991⁄4-28 H3 1 21⁄2 TJ326-1553 13.46 7.995⁄16-18 H3 11⁄8 223⁄32 TJ325-5047 16.58 8.995⁄16-24 H3 11⁄8 223⁄32 TJ326-1560 16.58 8.993⁄8-16 H3 11⁄4 215⁄16 TJ325-5048 18.74 10.997⁄16-14 H3 17⁄16 35⁄32 TJ325-5049 31.98 18.997⁄16-20 H3 17⁄16 35⁄32 TJ319-6198 31.98 18.991⁄2-13 H3 121⁄32 33⁄8 TJ325-5050 33.98 19.991⁄2-20 H3 121⁄32 33⁄8 TJ326-1555 37.98 22.795⁄8-11 H3 113⁄16 313⁄16 TJ325-5051 65.98 38.993⁄4-10 H3 2 41⁄4 TJ325-5052 92.98 54.99

$699Starting At

$699

Thread Limit:Indicates amount above basic pitch diameter

.0005" graduations per H limit value

Taper

Plug

Bottoming

SAVEUP TO

46%

35 Pc.Extractor Set

Includes:•6 spiral screw extractors: Ex-1 through Ex-6•13 multi-spline screw extractors: 1⁄8-1⁄2"•16 left-handed, mechanic's length cobalt

drills: 5⁄64-1⁄2"•Molded

plastic case •Usage chart


$14595Mfr's List$246.02

56-57 EH 10-11 Taps_Layout 1 10/15/10 10:23 AM Page 2






































































Indexable Cutting Tools

58


C5 Sale Price Ea. TiN Coated Sale Price Ea.Size IC Model # 1-9 10+ Model # 1-9 10+221 1⁄4" — TJ340-1200 $4.59 $3.21222 1⁄4 TJ340-1006 $3.99 $2.79 TJ340-1204 4.59 3.21321 3⁄8 TJ340-1010 4.29 3.00 TJ340-1208 4.79 3.35322 3⁄8 TJ340-1014 4.29 3.00 TJ340-1212 4.79 3.35323 3⁄8 TJ891-6962 4.29 3.00 TJ891-6963 4.79 3.35431 1⁄2 TJ325-7217 4.99 3.49 TJ325-7219 5.69 3.98432 1⁄2 TJ340-1016 4.99 3.49 TJ340-1216 5.69 3.98433 1⁄2 TJ325-7221 4.99 3.49 TJ325-7222 5.69 3.98

Style TPMM (T.T.) Indexable Carbide Inserts• 10 per package

5 Pc. Indexable CarbideTurning Toolholder Sets

Includes: •Style A, 1 left, 1 right, Style B, 1 left, 1 right and 1 Style E

holders and insert hold-down screw •Uses T.T. style carbide inserts

$1999Starting At

$1999Shank Insert Reg. SaleSize IC Model # Price Price3⁄8" 1⁄4" TJ250-1400 $31.98 $19.991⁄2 3⁄8 TJ250-1401 34.98 29.995⁄8 3⁄8 TJ250-1402 52.98 34.993⁄4 3⁄8 TJ250-1404 75.98 38.991 1⁄2 TJ250-1406 76.98 42.99

SAVEUP TO

48%SAVE30%In Pkg. Qty.

Mfr's Low Price EachStyle Grade IC Thick. Model # 1-9 10+CCMT32.51 ICP55 3⁄8" 5⁄32" TJ328-5608 $6.65 $5.32CCMT32.52 ICP55 3⁄8 5⁄32 TJ328-5609 6.65 5.32CPMT21.51 ICP55 1⁄4 3⁄32 TJ328-5717 6.10 4.88CPMT32.51 ICP55 3⁄8 5⁄32 TJ328-5718 6.50 5.20CPMT32.52 ICP55 3⁄8 5⁄32 TJ328-5719 6.50 5.20RD12P I22 3⁄4 3⁄16 TJ328-5811 8.55 6.84SPG422 ICP55 1⁄2 1⁄8 TJ328-5642 5.90 4.72SPGH433 TCN55 1⁄2 3⁄16 TJ328-5653 14.15 11.32SNU633 TCN55 3⁄4 3⁄16 TJ328-5634 10.88 8.70SPU533 I55 5⁄8 3⁄16 TJ328-5639 6.16 4.93TCMT32.51 ICP55 3⁄8 5⁄32 TJ328-2077 7.16 5.73TCMT32.52 ICP55 3⁄8 5⁄32 TJ328-2079 7.16 5.73TPG221 ICP55 1⁄4 1⁄8 TJ328-5754 3.32 2.65TPG321 ICP55 3⁄8 1⁄8 TJ328-5756 3.57 2.86TPG322 ICP55 3⁄8 1⁄8 TJ328-5757 3.57 2.86TPG323 ICP55 3⁄8 1⁄8 TJ328-5758 3.57 2.86TPG431 ICP55 1⁄2 3⁄16 TJ328-5760 6.16 4.93TPG432 ICP55 1⁄2 3⁄16 TJ328-5761 6.16 4.93TPGB211 TCN55 1⁄4 3⁄32 TJ328-5783 4.85 3.88TPGB321 I77 3⁄8 1⁄8 TJ328-5748 6.66 5.33TPGB322 TCN55 3⁄8 1⁄8 TJ328-5784 15.03 12.02TPGC321 TCN55 3⁄8 1⁄8 TJ328-5785* 9.35 7.48TPGH21.51 TCN55 1⁄4 3⁄32 TJ328-5778 8.08 6.46TPGH321 I22 3⁄8 1⁄8 TJ328-5744 6.51 5.21TPGH321 TCN55 3⁄8 1⁄8 TJ328-5779 8.27 6.62TPGH322 TCN55 3⁄8 1⁄8 TJ328-5780 8.27 6.62TPMT21.51 ICP55 1⁄4 3⁄32 TJ328-5769 5.68 4.54TPMT32.51 ICP55 3⁄8 5⁄32 TJ328-5771 8.38 6.70TPMT32.52 ICP55 3⁄8 5⁄32 TJ328-5772 8.38 6.70VBMT221 ICP55 1⁄4 1⁄8 TJ328-5710 8.47 6.78

Turning CarbideInserts

CCMT

TPG

$265As Low As

$265

SAVE20%On Qty.: 10+

*LF Chip-breaker

SPG

Turning Toolholder Kit

IfShank Shank Purchased Sale

Toolholder W Ht. OAL Insert Model # Separately PriceMWLNR 10-3A 5⁄8" 5⁄8" 4" WNMG332 TJ317-0801 $161.09 $112.00MWLNR 12-3B 3⁄4 3⁄4 41⁄2 WNMG332 TJ317-0802 164.69 115.00MCLNR 12-4B 3⁄4 3⁄4 41⁄2 CNMG432 TJ317-0799 189.91 132.00MCLNR 16-4D 1 1 6 CNMG432 TJ317-0798 190.52 133.00MWLNR 12-4B 3⁄4 3⁄4 41⁄2 WNMG432 TJ317-0803 193.38 135.00MWLNR 16-4D 1 1 6 WNMG432 TJ317-0804 197.04 137.00

•Insert Grade TP200 forSemi-Finishing

TP200 Grade Cross Reference ChartSeco TP200Iscar IC9025, IC8048, IC8025Kennametal KC9125, KC9215, KC9225Mitsubishi UC6010, UE6020, US7020RTW RC8015, RC8025Sandvik GC4025, GC4225, GC2015Sumitomo AC1000, AC2000, AC500GStellram NL30Valenite SV415, SV315, SV325Walter WAK20, WAK25

$112As Low As

$112BONUSTOOLHOLDERw/Purchase of

10 Inserts

SAVE30%

Tri-Dex Indexable End MillsPositive Rake • 90° Cut • Uses 3⁄8" I.C. triangular inserts (TPG/TPU)•Cutter body length: 15⁄8"

Cutting Shank No. of Reg. SaleDia. Dia. Inserts Model # Price Price3⁄4" 3⁄4" 1 TJ422-3013 $55.98 $45.9511⁄4 R8 2 TJ422-3012 87.98 71.9911⁄2 3⁄4 3 TJ422-3010 107.98 88.4911⁄2 1 3 TJ422-3011 104.98 85.952 3⁄4 3 TJ422-3008 145.98 120.952 1 3 TJ422-3009 142.98 116.952 R8 3 TJ422-3007 158.98 129.992 R8 3 TJ422-3003* 218.98 178.5921⁄2 R8 5 TJ422-3006 243.98 199.993 11⁄4 5 TJ422-3005 251.98 205.953 R8 5 TJ422-3004 273.98 223.89

LowDescription Model # PriceSocket Screw for Clamp TJ505-6927 .51Hold-Down Clamp TJ505-6926 5.66

Replacement Parts

*Extra-long OAL of 81⁄4" Inserts sold separately.

$4595Starting At

$4595

SAVEUP TO

18%

Carbide-Tipped Boring Bar Sets

•C2 for cast iron and nonferrous materials •C6 for steel • Includes wooden stand

Shank C 2 C 6 Reg. SaleSet Dia. Model # Model # Price Price9 Pc. 3⁄8" TJ375-1002 TJ375-1006 $43.98 $15.959 Pc. 1⁄2 TJ375-1202 TJ375-1206 56.98 19.9512 Pc. 5⁄8 TJ375-1402 TJ375-1406 97.98 32.9512 Pc. 3⁄4 TJ375-1602 TJ375-1606 111.98 39.957 Pc. 1 TJ375-1802 TJ375-1806 179.98 61.95

SAVEUP TO

66%$1595As Low As

$1595

58-59 EH 10-11 Indexable_Layout 1 10/15/10 10:24 AM Page 1
















































































Service – 800-USE-ENCO


Indexable Cutting Tools

Trigon BoringBars & InsertsFor Boring & Facing

Computer engineered for lower cuttingforces and better tool life.•Right hand • Steel shank•Unique three-wall pocket support for

additional boring bar strength•Smallest minimum bore per shank size in

the industry

Trigon Indexable Inserts• PVD coated

$6595Starting At

$6595Boring Bars

Shank Min. Max. Mfr's SaleDia. Bore Bore OAL Model # List Price

G Series3⁄16" .260" .748" 4" TJ317-3458 $81.67 $65.951⁄4 .285 1.000 4 TJ317-3460 81.67 65.955⁄16 .347 1.248 4 TJ317-3462 81.68 65.95Q Series3⁄8 .415 1.500 5 TJ317-3468 88.59 70.951⁄2 .540 2.000 6 TJ317-3470 95.54 76.95S Series5⁄8 .675 2.500 7 TJ317-3475 95.53 76.953⁄4 .800 3.000 8 TJ317-3477 103.92 83.95

Boring Bars

Insert Inscribed Industry Corner Mfr's SaleStyle/Size Circle Grade Radius Model # List PriceG SeriesWPGT-602 .187" CG5 .004" TJ317-3483 $12.33 $5.95WPGT-605 .187 CG5 .008 TJ317-3485 12.33 5.95WPGT-61 .187 CG5 .015 TJ317-3487 12.33 5.95Q SeriesWPGT-2202 .250 CG5 .004 TJ317-3489 12.72 5.95WPGT-2205 .250 CG5 .008 TJ317-3491 12.72 5.95WPGT-221 .250 CG5 .015 TJ317-3493 12.72 5.95S SeriesWPMT-321GP.375 CG55 .015 TJ317-3479 19.82 9.95WPMT-322GP.375 CG55 .031 TJ317-3481 19.83 9.95

SAVE19%On Boring Bars

•Ideal for grooving and profiling applications

•With coolant holes

Internal Threading & Grooving Bars & Flo-Lock Inserts

Right-hand tools use left-hand inserts;left-hand tools use right-hand inserts.

Shank Corner Min. Bore Right Hand Left Hand Reg. SaleDescription Dia. OAL Radius Dia. Insert Style Model # Model # Price PriceA08-FLER/L2 .500" 8" .437" .730" FL-2L, FL-2R TJ317-3557 TJ317-3553 $90.98 $75.95A10-FLER L2 .625 10 .500 1.000 FL-2L, FL-2R TJ317-3558 — 106.98 89.95A12-FLER/L2 .750 10 .562 1.125 FL-2L, FL-2R TJ317-3551 TJ317-3554* 129.98 108.95A16-FLER/L3 1.000 12 .688 1.375 FL-3L, FL-3R TJ317-3559 TJ317-3555 169.98 141.95A20-FLER/L3 1.250 14 .875 1.750 FL-3L, FL-3R TJ317-3560 TJ317-3556 180.98 151.95A28-FLER L4 1.750 16 1.250 2.250 FL-4L, FL-4R TJ317-3552 — 233.98 195.95

Flo-Lock 60º Threading Inserts •GP3 Grade for combined hardness and toughness on

high-temperature alloys, stainless and nonferrous•GP50 Grade for steels

TPI TPI Grade GP3 Grade GP50 Reg. SaleDescription Int. Ext. Radius Thick. Model # Model # Price PriceFLT-2L 7-20 8-36 .005" .150" TJ317-3676 TJ317-3591 $13.43 $10.95FLT-2R 7-20 8-36 .003 .150 TJ317-3655 TJ317-3582 13.43 10.95FLT-3L 5-12 6-20 .008 .195 TJ317-3656 TJ317-3578 13.97 10.95FLT-3R 5-12 6-20 .005 .195 TJ317-3657 TJ317-3587 13.97 10.95FLT-4L 4-12 4-20 .008 .255 TJ317-3658 TJ317-3659 17.35 13.95FLT-4R 4-12 4-20 .003 .255 TJ317-3660 TJ317-3661 17.35 13.95

*Min. bore dia: 1.26"

SAVEUP TO

21%

Each set includes:•8-Style "A" (Right Hand) •8-Style "A" (Left Hand) •4-Style "B" (Right Hand) •4-Style "B" (Left Hand)•4-Style "C", 4-Style "D" •6-Style "E"

38 Pc. Brazed Carbide Tool Bit SetsGrade C5 for Steel & Steel Alloys

SAVEUP TO

34%Reg. Sale

Size Model # Price Price1⁄4" TJ383-4200 $57.98 $37.955⁄16 TJ383-4300 57.98 37.953⁄8 TJ383-4400 57.98 37.951⁄2 TJ383-4500 86.98 57.95

$3795Starting At

$3795

Carbide-Tipped Tool BitsRight- & Left-Hand Styles

Style AR—Right hand for turning to squareshoulder, cuts from right to leftStyle AL—Left hand for turning to square shoulder, cuts from left to rightStyle BR—Right hand 15° lead angle for turning when no square shoulder is needed, cuts from right to leftStyle BL—Left hand 15° lead angle for facing when no square shoulder is needed, cuts from left to right• C2 grade for cast iron and

nonferrous materials• C6 grade for steel and steel alloys • Used for general machining

operations such as turning, boring and chamfering

Style AR

Style AL

Style BR

Style BL

SAVE28%In Pkg. Qty.

Price EachIndustry C2 Grade C6 Grade Less Than Pkg.No. Size Model # Model # Pkg. Qty.Style ARAR-4 1⁄4" TJ383-0012 TJ383-0015 $3.04 $2.28AR-5 5⁄16 TJ383-0022 TJ383-0025 3.04 2.28AR-6 3⁄8 TJ272-0032 TJ383-0035 3.04 2.28AR-8 1⁄2 TJ383-0052 TJ383-0055 3.39 2.54Style ALAL-4 1⁄4 TJ383-0112 TJ383-0115 3.04 2.28AL-5 5⁄16 TJ383-0122 TJ383-0125 3.04 2.28AL-6 3⁄8 TJ383-0132 TJ383-0135 3.04 2.28AL-8 1⁄2 TJ383-0152 TJ383-0155 3.39 2.54Style BRBR-4 1⁄4 TJ383-1012 TJ383-1015 3.04 2.28BR-5 5⁄16 TJ383-1022 TJ383-1025 3.04 2.28BR-6 3⁄8 TJ383-1032 TJ383-1035 3.04 2.28BR-8 1⁄2 TJ383-1052 TJ383-1055 3.39 2.54Style BLBL-4 1⁄4 TJ383-1112 TJ383-1115 3.04 2.28BL-5 5⁄16 TJ383-1122 TJ383-1125 3.04 2.28BL-6 3⁄8 TJ383-1132 TJ383-1135 3.04 2.28BL-8 1⁄2 TJ383-1152 TJ383-1155 3.39 2.54

10 Bits PerPackage

58-59 EH 10-11 Indexable_Layout 1 10/15/10 10:24 AM Page 2










































































Raw Materials

60


•Folds and crease-seals with ease for an airtight envelope for heat treating • Eliminates decarburization and scales

•No special controls or atmosphere furnace required

•.002" thicknessType 321–High Titanium•For temperatures up to 1800°FType 309–High-Temperature•For temperatures up to 2100°F

Stainless Steel Tool Wrap

Reg. SaleSize Model # Price PriceType 32120" x 50' TJ326-1521 $175.98 $115.0020 x 100 TJ326-1520 337.98 225.00Type 30920 x 50 TJ326-1516 224.98 155.0020 x 100 TJ326-1515 440.98 285.00

$115As Low As

$115

SAVEUP TO

35%

SAVEUP TO

35%On Qty.: 4+

•Alloy 6061 •Corrosion

resistant

Aluminum Round Rods6' Lengths

Sale Price Each Sale Price EachDia. Model # 1-3 4+ Dia. Model # 1-3 4+3⁄16" TJ505-3643 $4.17 $2.99 11⁄8" TJ505-3652 $35.98 $25.991⁄4 TJ505-3644 6.68 4.99 11⁄4 TJ505-3653 42.98 31.995⁄16 TJ505-3645 9.23 5.99 13⁄8 TJ505-3654 49.98 36.993⁄8 TJ505-3646 9.37 6.99 11⁄2 TJ505-3655 53.98 39.997⁄16 TJ240-2609 13.99 9.99 15⁄8 TJ240-2610 63.98 46.991⁄2 TJ505-3647 13.65 9.99 13⁄4 TJ505-3656 70.98 52.995⁄8 TJ505-3648 14.41 9.99 2 TJ505-3657 91.98 67.993⁄4 TJ505-3649 20.11 14.99 21⁄4 TJ505-3658 116.98 86.997⁄8 TJ505-3650 24.07 17.99 21⁄2 TJ505-3659 141.98 105.991 TJ505-3651 29.98 21.99 3 TJ505-3660 199.98 148.99

$299As Low As

$299Each Qty.: 4+

Cored BronzeRounds13" Lengths

•SAE 660 (CDA 932)•Ideal for general-utility

bearings and bushings•High-quality, rough

machine-finished stock

SAVEUP TO

28%On Qty.: 4+

Sale Price EachID x OD Model # 1-3 4+1⁄2 x 1" TJ505-3771 $26.98 $19.991⁄2 x 11⁄4 TJ240-2479 44.98 33.691⁄2 x 11⁄2 TJ505-3896 60.98 45.695⁄8 x 1 TJ240-2480 23.66 17.695⁄8 x 11⁄4 TJ510-1879 40.98 29.993⁄4 x 1 TJ510-1882 18.23 12.993⁄4 x 11⁄4 TJ505-3772 35.98 26.983⁄4 x 11⁄2 TJ240-2475 56.98 42.69

$1299As Low As

$1299EachQty.: 4+

Sale Price EachID x OD Model # 1-3 4+3⁄4 x 21⁄2" TJ510-1874 $141.98 $106.397⁄8 x 11⁄4 TJ510-1881 29.98 22.391 x 11⁄4 TJ240-2476 23.47 17.591 x 11⁄2 TJ505-3773 43.98 32.981 x 13⁄4 TJ505-3897 65.98 49.391 x 2 TJ505-3774 88.98 66.6911⁄4 x 13⁄4 TJ240-2477 53.98 40.3911⁄4 x 2 TJ505-3775 86.98 64.9911⁄4 x 21⁄2 TJ510-1883 152.98 114.6911⁄2 x 2 TJ505-3776 64.98 48.6911⁄2 x 21⁄2 TJ240-2478 135.98 101.9813⁄4 x 21⁄2 TJ240-2481 112.98 84.692 x 21⁄2 TJ240-2482 83.98 62.982 x 23⁄4 TJ240-2483 124.98 93.692 x 3 TJ240-2484 170.98 127.99

Brass Round Rods6' Lengths

•Alloy 360 •Readily soldered and brazed•Easily machined

*1' length

$249As Low As

$249

Sale Price EachDia. Model # 1-3 4+1⁄8" TJ505-3712 $2.92 $2.495⁄32 TJ240-2611 4.81 4.193⁄16 TJ505-3713 5.95 5.197⁄32 TJ240-2612 8.46 7.491⁄4 TJ505-3714 9.60 8.399⁄32 TJ240-2613 11.44 10.095⁄16 TJ505-3715 14.05 12.393⁄8 TJ505-3716 20.03 17.697⁄16 TJ505-3717 25.98 22.891⁄2 TJ505-3718 32.98 29.199⁄16 TJ505-3719 38.98 34.59 Each

Qty.: 4+

Sale Price EachDia. Model # 1-3 4+5⁄8" TJ505-3720 $47.98 $42.793⁄4 TJ505-3721 64.98 57.1925⁄32 TJ505-3722 65.98 58.791 TJ505-3723 80.98 64.6911⁄8 TJ505-3724 131.98 116.9911⁄4 TJ505-3725 156.98 139.0913⁄8 TJ505-3726 187.98 166.8911⁄2 TJ505-3727 217.98 190.0915⁄8 TJ505-3728 252.98 216.692 TJ505-3729 371.98 297.193 TJ505-3730* 214.98 193.194 TJ505-3731* 390.98 347.09

SAVEUP TO

20%On Qty.: 4+

15 Pc. ShimAssortments

15 sizes—1 piece each: .001, .0015, .002, .003, .004, .005,.006, .007, .008, .010, .012, .015,.020, .025 & .031"

Reg. SaleDescription Model # Price PriceSteel TJ406-0288 $30.98 $19.95Brass TJ406-0290 59.98 35.95

6 x 12" Steel or Brass

SAVEUP TO

40%

$1995As Low As

$1995

Water & Oil Hardening• 3' Lengths

Drill Rod

•Fine grain, fully spheroidizedWater Hardening •100% decarb-free, commercial-grade tool

steel • High-carbon content allows for use without heat treatment

Oil Hardening •Non-shrinking tool steel with

excellent abrasion resistanceand machinability

99¢As Low As

99¢EachQty.: 4+

Diameter: 3⁄16 to 1 1⁄4" 1 1⁄2 to 2"Section: ±.001" ±.001"Concentricity: .0005" .00075"Length: +1⁄8/.00" +1⁄8/.00"

Tolerances Water Hard. Oil Hard.

Water Hard. Sale Price Ea. Oil Hard. Sale Price Ea.Dia. Model # 1-3 4+ Model # 1-3 4+1⁄8" TJ409-0005 $1.16 $.99 TJ408-0005 $1.50 $1.273⁄16 TJ409-0009 1.77 1.50 TJ408-0009 2.15 1.831⁄4 TJ409-0013 2.17 1.85 TJ408-0013 2.50 2.125⁄16 TJ409-0017 2.96 2.52 TJ408-0017 3.45 2.933⁄8 TJ409-0021 4.17 3.54 TJ408-0021 5.29 4.507⁄16 TJ409-0025 5.38 4.57 TJ408-0025 6.63 5.641⁄2 TJ409-0029 5.56 4.73 TJ408-0029 7.95 6.915⁄8 TJ409-0037 9.15 7.78 TJ408-0037 12.59 10.703⁄4 TJ409-0045 12.94 11.00 TJ408-0045 15.55 13.227⁄8 TJ409-0053 19.38 16.47 TJ408-0053 26.50 22.521 TJ409-0061 22.55 19.17 TJ408-0061 29.96 25.4711⁄8 TJ409-0069 31.43 26.72 TJ408-0069 41.75 35.4911⁄4 TJ409-0077 38.25 32.51 TJ408-0077 48.89 41.5611⁄2 TJ409-0093 50.63 43.04 TJ408-0093 69.75 59.292 — TJ505-0239 122.93 104.49

SAVE15%On Qty.: 4+

60-61 EH 10-11 Raw Materials_Layout 1 10/15/10 10:25 AM Page 1








































































































Raw Materials

•Alloy 6061•Good corrosion resistance•Tolerance: ±1⁄4"

AluminumRectangles6' Lengths

$579As Low As

$579EachQty.: 4+

SAVEUP TO

31%On Qty.: 4+

Thick. Sale Price Eachx W Model # 1-3 4+1⁄8 x 1" TJ505-3672 $7.71 $5.791⁄8 x 2 TJ505-3673 14.54 11.191⁄4 x 1 TJ505-3674 14.54 10.791⁄4 x 11⁄2 TJ505-3675 16.37 13.891⁄4 x 2 TJ505-3676 25.98 21.691⁄4 x 3 TJ505-3677 33.98 27.991⁄4 x 4 TJ505-3678 45.98 38.991⁄4 x 5 TJ325-4295 53.98 45.691⁄4 x 6 TJ325-4308 80.98 55.793⁄8 x 1 TJ891-6138 20.68 15.393⁄8 x 11⁄2 TJ505-3679 27.98 21.093⁄8 x 2 TJ505-3680 33.98 28.793⁄8 x 3 TJ505-3681 48.98 40.993⁄8 x 4 TJ505-3682 61.98 51.991⁄2 x 1⁄2 TJ505-3664 14.19 11.991⁄2 x 1 TJ505-3683 25.98 19.591⁄2 x 11⁄2 TJ505-3684 33.98 28.891⁄2 x 2 TJ505-3685 44.98 37.991⁄2 x 3 TJ505-3686 61.98 49.191⁄2 x 4 TJ505-3687 73.98 61.991⁄2 x 6 TJ505-3688 100.98 84.995⁄8 x 11⁄2 TJ505-3689 42.98 35.995⁄8 x 2 TJ240-2392 54.98 46.49

Solid Alloy BronzeRound Rods

•SAE 660 (CDA 932)

Sale Price EachOD Model # 1-3 4+1⁄2" TJ505-3764 $10.93 $7.995⁄8 TJ505-3765 15.97 11.993⁄4 TJ505-3766 19.67 14.997⁄8 TJ505-3898 25.98 19.991 TJ505-3767 25.98 19.9911⁄8 TJ505-3899 39.98 30.9911⁄4 TJ505-3768 45.98 35.9913⁄8 TJ505-3900 55.98 43.9911⁄2 TJ505-3769 62.98 48.9913⁄4 TJ505-3902 79.98 62.992 TJ505-3770 101.98 79.9921⁄4 TJ505-3892 133.98 105.9921⁄2 TJ505-3893 160.98 127.993 TJ505-3894 215.98 171.9931⁄2 TJ505-3903 272.98 216.99

SAVEUP TO

26%On Qty.: 4+

EachQty.: 4+

$799As Low As

$799

13" Lengths

Type 302/304 Stainless SteelSafety Lock Wire

•General-purpose annealed wire is furnished in handy dispensing canister

•Used in aircraft and general- purpose industrial applications where locking fasteners in place is required

•Meets ASTM A580 chemistry

Wire Gauge Approx. Feet 1 1b. Spool Price Per Lb. 5 1b. Spool Price Per Lb.Dia. No. Per Lb. Model # Reg. Sale Model # Reg. Sale

.020" 24 925 TJ240-2211 $18.38 $12.95 TJ327-6873 $65.98 $48.95

.025 22 595 TJ240-2212 17.96 12.95 —

.032 20 362 TJ240-2213 15.26 10.95 TJ325-4420 54.98 40.95

.041 18 221 TJ240-2214 14.67 10.95 TJ325-4421 52.98 38.95

.051 16 143 TJ240-2215 15.31 10.95 TJ325-4422 43.98 32.95

$1095As Low As

$1095

SAVEUP TO

29%HELPS LOCKFASTENERS IN PLACE!

•Right-hand thread •Repair lathes,

mills, vises, etc.

Acme Threaded Rod & NutsOil Finish

SAVEUP TO

64%

Size & Acme Nuts Sale 3' Lengths Sale 6' Lengths SalePitch Model # Price Model # Price Model # Price3⁄8"-12 TJ328-1105 $1.49 TJ890-9838 $3.99 TJ890-9839 $5.991⁄2-10 TJ407-2200 1.69 TJ408-0200 5.99 TJ408-0220 9.395⁄8-8 TJ407-2202 1.99 TJ408-0202 6.49 TJ408-0222 18.295⁄8-6 TJ407-2204 2.49 TJ408-0204 11.29 TJ408-0224 21.993⁄4-6 TJ407-2206 2.59 TJ408-0206 9.99 TJ408-0226 16.997⁄8-6 TJ407-2208 3.79 TJ408-0208 12.99 TJ408-0228 25.991-5 TJ407-2210 4.19 TJ408-0210 16.99 TJ408-0230 29.9911⁄8-5 TJ407-2212 5.29 TJ408-0212 19.99 TJ408-0232 35.9911⁄4-5 TJ407-2214 6.59 TJ408-0214 29.95 TJ408-0234 52.9911⁄2-4 TJ407-2216 12.39 TJ408-0216 59.95 TJ408-0236 99.99

$149As Low As

$149

Alloy 5052-H32Aluminum Sheets

•The highest-strength alloy of the morecommon non-heat treatable grades

•Good resistance to marine atmosphere and salt water corrosion

•Excellent finish SAVEUP TO

26%

$339As Low As

$339

Reg. SaleThick. W L Model # Price Price.0320" 12" 12" TJ505-6389 $4.53 $3.39.0320 12 24 TJ505-6390 8.04 5.99.0320 24 24 TJ505-6391 15.60 11.69.0320 24 48 TJ240-7208 27.98 21.29.0400 12 12 TJ240-2494 5.72 4.29.0400 12 24 TJ240-2495 10.31 7.69.0500 12 12 TJ505-6392 6.89 5.09.0500 12 24 TJ505-6393 12.56 9.39.0500 24 24 TJ505-6394 24.03 17.99.0500 24 48 TJ240-2496 44.98 34.09.0800 12 12 TJ505-6395 9.77 7.29.0800 12 24 TJ505-6396 18.64 13.99.0800 24 24 TJ505-6397 35.98 27.19.0800 24 48 TJ240-2497 60.98 46.09.1250 12 12 TJ505-6398 12.88 9.69.1250 12 24 TJ505-3751 24.08 18.09.1250 24 24 TJ240-2498 42.98 31.99.1250 24 48 TJ505-3752 67.98 51.29

Acetal Rods4' Lengths

•Easily machined •Makes pump and valve

components, gears & bearings•Wear and moisture resistant •High-tensile strengthNatural—High natural lubricityBlack—Normal lubricity

$149Starting At

$149

Natural Reg. Sale Black Reg. SaleDia. Model # Price Price Model # Price Price1⁄4" TJ240-2568 $2.02 $1.59 TJ240-2581 $1.98 $1.495⁄16 TJ325-4566 2.62 2.29 TJ325-4573 2.95 2.093⁄8 TJ240-2570 3.36 2.29 TJ240-2582 3.38 2.691⁄2 TJ891-6534 5.88 4.99 TJ240-2584 5.77 4.995⁄8 TJ891-6536 8.46 5.99 TJ240-2585 8.81 6.993⁄4 TJ891-6538 10.10 7.99 TJ240-2587 11.12 8.997⁄8 TJ325-4570 15.24 11.99 TJ325-4579 16.94 13.991 TJ891-6540 18.21 14.99 TJ240-2589 20.19 15.9911⁄4 TJ891-6542 26.98 21.99 TJ240-2591 30.98 25.9911⁄2 TJ891-6544 38.98 31.99 TJ240-2593 40.98 32.992 TJ891-6546 64.98 54.99 TJ240-2596 68.98 56.9921⁄4 TJ891-6548 85.98 71.99 TJ890-9837 89.98 79.99

SAVEUP TO

31%

60-61 EH 10-11 Raw Materials_Layout 1 10/15/10 10:25 AM Page 2

























































































































Shop Supplies

62


•Large LCD with backlight • Built-in laser pointer to improve aim •Fixed emissivity (.95) covers 90% of surface applications •Narrow field of view • Audible and visible overrange indicators •°F/°C switchable • Automatic data hold • 6:1 field of view •Complete with 9V battery • Carrying case

SAVEUP TO

13%

$6895As Low As

$6895Mfr's Sale

Range Mfr's # Model # List Price0 to 600ºF 42529 TJ307-2938 $79.99 $68.95-58 to 1000ºF 42530 TJ307-2936 89.99 78.95

InfraRed Thermometers

Mfr's #42530

Durable against rust.Recommended for steel up to 50HRC. Comes in a fitted case.•Includes A-Z, period and 0-8•6/9 interchangeable

36 Pc. Machine Made Steel Figure/Letter Sets

$2599Starting At

$2599SAVE

UP TO

36%

Approx. Size Reg. Saleof Character Model # Price Price1⁄16" TJ505-1432 $40.98 $25.993⁄32 TJ505-1433 40.98 25.991⁄8 TJ505-1434 40.98 25.993⁄16 TJ505-1435 51.98 34.991⁄4 TJ505-1436 60.98 39.95

• On-off switch with “power-on” indicator light• Lightweight pencil iron• Cushioned foam grip with

replaceable heating element• Safety guard iron holders • Natural sponge-tip cleaning pad• 40 watts of continuous power• Includes ST3 iron-plated copper tip• 900˚F, temp. • 6′ cord

WLC100 Soldering Station


$4995Reg. Price$58.98

SAVE15%

Safety Glasses

Lens Reg. SaleColor Model # Price PriceProtector™Clear TJ319-5353 $2.94 $2.59Smoke TJ319-5354 3.90 3.29Indoor/Outdoor TJ319-5355 3.90 3.29Ventilator™Clear TJ319-5364 8.04 7.49Smoke TJ319-5365 8.25 7.69Indoor/Outdoor TJ319-5366 9.22 8.69Blue Mirror TJ319-5367 8.63 7.99

Protector™Smoke Lens

$259As Low As

$259

SAVEUP TO

15%• Polycarbonate lens offers

impact resistance • Distortion-free lens • 99.9% UV protection • Meets ANSI Z87.1+ standardsProtector™• Streamlined design for men

and women • Rubber-tipped temples for a secure, comfortable fit

• Weighs less than 1 oz. • Yellow frameVentilator™• Wraparound frame • Soft rubber nosepiece• Rubber-tipped temples with belt ribs keep

glasses securely in place • Silver frame

Ventilator™Blue Mirror Lens

Broad Tip•Marks on wood, glass, paper,

metal and many other surfaces•Permanent mark, but can

be removed with fluid remover

Industrial MarkersGeneral Purpose

SAVE10%On Qty.: 24+

Price EachColor Model # 1-23 24+Black TJ619-2909 $2.54 $2.29White TJ619-2912 2.54 2.29Yellow TJ619-2911 2.54 2.29Orange TJ619-2913 2.54 2.29Red TJ619-2908 2.54 2.29Green TJ619-2910 2.54 2.29Gold TJ619-2914 2.54 2.29Violet TJ619-2916 2.54 2.29Silver TJ619-2915 2.54 2.29

•Prevents glare with uniform, deep color•Dries in two to four minutes•Scribes sharp, clear precise lines

Blue/Red Layout Fluid

$369As Low As

$369

SAVEUP TO

27%

Blue Red Reg. SaleContainer Size Model # Model # Price Price2 oz. Felt Tip Applicator TJ 505-1392 TJ505-1391 $4.46 $3.694 oz. Can w/Cap Brush TJ825-8310 TJ505-1393 5.43 4.298 oz. Can w/Cap Brush TJ825-8320 TJ825-8350 6.92 5.6916 oz. Aerosol TJ825-8300 TJ825-8340 9.22 7.2931.4 oz. Jug TJ505-1386 TJ505-1395 13.90 10.29

Layout Fluid Remover•Removes layout fluid and staining colors •Removes oil, grease and dirt from metals

and plastics • Use to dilute layout fluid • Contains no Class 1 ozone-depleting chemicals • 16 oz.; net fill 12 oz. • Case qty.: 12


$679On 12+Price Ea. 1-11 $7.99

Fastfit® Gloves• Two-way stretch spandex tops for flexibility• Durable, comfortable, smooth Clarino® synthetic leather

palm with breathable mesh back • Index finger knuckle reinforcement band • Concealed seams for snag resistance and Lycra® panels between fingers for extra comfort and mobility

• Ultra-thin TPR (thermal plastic rubber) hook-and-loop closures for snugness and adjustability • Metal grommet for hanging

$1295As Low As

$1295Per PairReg. Price$14.91

Model #Size Black Black w/ Yellow Cuff Red BlueSmall TJ325-5421 — — —Medium TJ325-5586 TJ325-5412 TJ325-5415 TJ325-5418Large TJ325-5587 TJ325-5413 TJ325-5416 TJ325-5419X-Large TJ325-5588 TJ325-5414 TJ325-5417 TJ325-5420XX-Large TJ325-5422 — — —

SAVEUP TO

13%

62-63 EH 10-11 Shop Supplies Bkg_Layout 1 10/15/10 10:26 AM Page 1


















































Shop SuppliesOnline at use-enco.com


Reg. SaleLength Model # Price PriceHose Only15' TJ890-9355 $22.35 $16.9525 TJ890-9356 29.98 22.9530 TJ890-9357 30.98 23.95Sets15 TJ505-0742 35.98 19.9525 TJ505-0743 43.98 25.95

Polyurethane Self-Storing Air Hose & Blow Gun Sets

•Pigtails eliminate the need for whip hoses

•Swivel fitting on both ends

•1⁄4" hose ID x 1⁄4" swivel MPT

•Sets include hose plus blow gun

SAVEUP TO

44%

Safety Pistol Blow GunsFixed Angle Nozzle with Side Hole

•4" tube length •1⁄4" NPT female brass

thread connection •-40 to 176°F

temperature range •160 psi max. working

pressure Regular-Duty•Lightweight, thin-walled

aluminum tubingHeavy-Duty•Heavy-walled

steel tubing

Tip Reg. SaleDescription Dia. Model # Price PriceRegular-Duty 1⁄4" TJ327-7345 $9.96 $5.99Heavy-Duty 5⁄16 TJ327-7346 12.25 7.99

$599As Low As

$599

SAVEUP TO

39%

TS4000T•Trigger start • Lock button

keeps torch lit• Pressure regulated

to burn in all directions• Replaceable brass tip • Stainless steel burn tube• Fits any standard portable tank

Self-LightingTorches

Reg. SaleMfr's # Fuel Type Model # Price PriceTS3000T Propane TJ510-1339 $33.98 $25.95TS4000T Propane/MAPP TJ510-1340 57.98 39.95TS7000T Propane/MAPP TJ319-9506 76.98 61.95

$2595As Low As

$2595

TS7000T•Trigger start • Cast-aluminum body•Stainless steel burn tube • Brass burn tip•Adjustable flame • Efficient swirl flame

TS3000T•Ergonomic grip • Regulated to burn

upside down•Adjustable

flame control • Replaceable brass tip•Stainless steel burn tube •Fits any standard portable tank

Contains No Class 1Ozone-Depleting ChemicalsOne Gallon Makes 33 GallonsFormula "77" for Tougher Service Mist &Flood Cooling•Recommended where tougher machining

conditions require greater lubricity•Particularly useful where the material is

very abrasiveFormula "78" Synthetic Mist Coolant forLight Duty •For high-efficiency cutting

of exotic metals and alloys such as Monel, Inconel, titanium and nonferrous metals

•Dissolves in waterto a clear solution

$2795As Low As

$2795

Container Case Mfr's SaleSize Qty. Model # List PriceFormula 771 gal. 4 TJ505-2076 $34.25 $28.955 gal. Pail 1 TJ505-2077 168.00 139.95Formula 781 gal. 4 TJ505-2074 33.00 27.955 gal. Pail 1 TJ505-2075 162.00 135.95

Formula 77 & 78Concentrated Coolants

Cordless LEDMagnetic Light Bar

•Energy-efficient bright white light •Magnetic back attaches to any

ferrous surface •Built-in hook allows use at any angle •Multi-purpose lights for use around

home, garage or workshop • 72 LED • 4 AA batteries

(not included)

SAVE29% $1195


$1195Reg. Price$16.95

Threadlockers 222MS™ Threadlocker, Low Strength/Purple•Locks and seals screws242® Threadlocker, Medium Strength/Removable/Blue•Locks and seals nuts, bolts, screws, fittings262™ Threadlocker, Permanent Strength/Red•Heavy-duty use on bolts and studs271™ Threadlocker, High Strength/Red•Locks and seals plugs, bolts, and nuts290™ Threadlocker, Wicking Grade/Green•Locks and seals pre-assembled fasteners to eliminate

vibration and corrosion

SAVEUP TO

25%

Reg. SaleDescription Size Model # Price Price222MS™ 10ml TJ505-2681 $12.31 $9.29Threadlocker 50 TJ825-8200 34.98 26.29

250 TJ505-2682 137.98 103.49242® 10 TJ825-8205 13.28 9.95Threadlocker 50 TJ825-8210 36.98 27.79

250 TJ505-2673 137.98 103.49262™ 10 TJ505-2674 12.65 9.49Threadlocker 50 TJ505-2675 34.98 26.95



250 TJ505-2678 137.98 103.49

$929As Low As

$929

62-63 EH 10-11 Shop Supplies Bkg_Layout 1 10/15/10 10:26 AM Page 2
































Shop Supplies

64

It's IN STOCK and Compact Fluorescent Task Lights

•23 watt Energy Star rated compact fluorescent lamp (included)•Mounting hardware for coupler base included•Double-wall shade design stays cool to the touch•6' cord with grounded plug • Color: Black

Reg. SaleDescription Reach Model # Price PriceAdjustable Clamp-On Base Task Light 24" TJ328-5478 $75.98 $65.95Coupler Base Task Light 24 TJ328-5476 69.98 59.95Direct Mount Task Light 24 TJ328-5479 65.98 55.95Magnetic Base Task Light 24 TJ328-5477 75.98 65.9523W Compact Fluorescent Lamp (Pkg. 2) TJ328-5475 18.32 15.95

$5595As Low As

$5595

SAVEUP TO

15%

TJ328-5478

Clear Lexan® ShieldLathe Guards

Suggested Center Use With Shield Dim. Reg. SaleLathe Size H Chucks W L H Model # Price Price6-12" 6" Up to 8" 6" 12" 6" TJ505-4016 $176.98 $128.9512-16 8 Up to 12 8 16 8 TJ505-4017 213.98 155.9516-20 10 Up to 16 8 19.7 10.25 TJ505-4019 249.98 181.9520-24 13 Up to 20 8 24 12 TJ505-4018 283.98 206.95

•Wraparound design accommodates 3- or 4-jaw chucks•Heavy-duty, chrome-plated extension tube and hardware •Lock-in, swing-away design•Exceeds OSHA requirements

for safety

$12895Starting At

$12895

SAVE27%

•Beveled edges on all sides for safety •Spills drain through holes •Designed for wet or dry work areas •Color: Black • 3' x 5' x 1⁄2" thick

Workrite Grease-ResistantRubber Workstation Mat


$4495Reg. Price$76.98

SAVE29%

Pre-moistened, with pumice scrubbing power.•72 sheets per bucket


$1095Reg. Price$15.43

Hand Cleaner Towels

SAVE41%

Pneumatic Vacuum Air Gun KitRemoves debris/chips with simultaneous blow and vacuumaction, transporting them to a heavy-duty collection bag.•Use as: Vacuum—for factory, shop, auto or home

Blower—for workbenches, tools and more•Quick-change setting from vacuum to blower•3.6 cfm @ 90 psi • Zinc body •1⁄4" NPT inlet thread Includes: 4 different size vacuum accessories, 4' flexible hose, heavy-duty collection bag and 2 clamps.


$1549Reg. Price$30.98

Hi-Strength 90•Fast, high contact bond

strength with 1 to 10 minutes of open time

•High temperature resistance•Variable spray pattern allows

for precise control•17.6 oz. net fill

Super 77™ Multi-Purpose•High coverage•Fast, aggressive tack with long

bonding range•Securely bonds lightweight

materials • 16.7 oz. net fill

AerosolAdhesives


$11596+Price Ea. 1-5 $12.39


$16296+Price Ea. 1-5 $17.35

Magnetic Base &Nozzle Assembly

SAVE50%

•Quickly attach to any ferrous metallic surface

•Strong holding power •Adjustable flow•6.1" ht. • 9.1" L head


$1499Reg. Price$29.98

Checklite®

Safety Glasses•Flexible spatula temple design for a

comfortable fit during long use•Strong, yet lightweight, polycarbonate

scratch-resistant lens•Lens is hardcoated

and offers 99.9% UV protection

•Compliance: ANSI Z87.1+

Lens Frame Sale Price Ea.Color Color Model # 1-11 12+Clear Clear TJ328-4568 $1.50 $1.09Gray Smoke TJ328-4569 1.50 1.09Light Blue Light Blue TJ328-4570 1.86 1.29

SAVEUP TO

30%On Qty.: 12+

64-65 EH 10-11 Shop/MatHand_Layout 1 10/15/10 10:27 AM Page 1




















Material Handling & StorageREADY TO SHIP!


Heavy-Duty Utility Carts500 lb. Capacity

UtilityCart

•Easy-reach tool/accessory hooks and storage area •Customize-it fittings built-in: add your own wire spools,

rolls and more • 2 shelves • Sturdy structural foam construction won’t rust, dent, chip or splinter

•5" non-marking gray TPR casters • Ergonomic handle Utility•23⁄4" deep shelf trays keep

small items from falling outFlat Shelf•For easy transport of

oversized bulky items

Overall Dim. Wt. Black Beige Mfr's SaleW x L x H Lbs. Mfr's # Model # Model # List PriceUtility17 x 383⁄8 x 323⁄4" 31 4500-88 TJ337-0000 TJ337-0003 $250.94 $165.0025 x 437⁄8 x 323⁄4 45 4520-88 TJ337-0001 TJ337-0004 219.44 185.0025 x 535⁄8 x 323⁄4 52 4546-00 TJ337-0002* TJ337-0005* 496.00 379.00Flat Shelf17 x 383⁄8 x 321⁄4 42 4505-00 TJ337-0006 TJ337-0009 267.74 175.0025 x 437⁄8 x 321⁄4 42 4525-00 TJ337-0007 TJ337-0010 297.14 195.0025 x 535⁄8 x 321⁄4 50 4545-00 TJ337-0008* TJ337-0011* 469.22 359.00

$165Starting At

$165SAVE

UP TO

34%*750 lb. capacity

Bins Price Per CaseOutside Dim. Bin Load Case Yellow Red Blue Reg. Sale Case Dividers LowW x D x H Cap. Lbs. Qty. Model # Model # Model # Price Price Qty. Model # Price41⁄8 x 53⁄8 x 3" 10 24 TJ317-0920 TJ317-0921 TJ317-0919 $24.38 $17.95 6 TJ327-6187 $3.4841⁄8 x 73⁄8 x 3 10 24 TJ317-0924 TJ317-0925 TJ317-0923 42.98 29.95 6 TJ327-6184 3.9551⁄2 x 107⁄8 x 5 30 12 TJ317-0928 TJ317-0929 TJ317-0927 54.98 38.95 6 TJ327-6185 5.9511 x 107⁄8 x 5 60 6 TJ317-0935 TJ317-0936 TJ327-6197 39.98 28.95 6 TJ327-6185 5.9581⁄4 x 103⁄4 x 7 50 6 TJ317-0939 TJ317-0940 TJ317-0938 43.98 31.95 6 TJ327-6188 6.9581⁄4 x 143⁄4 x 7 60 12 TJ317-0942 TJ317-0943 TJ327-6198 107.98 75.95 6 TJ327-6200 8.95161⁄2 x 143⁄4 x 7 75 6 TJ317-0946 TJ317-0947 TJ317-0945 74.98 53.95 6 TJ327-6200 8.95

Strong and versatile containers will stack on one another, hang from louvered panels, rails, racks and carts, forming efficient storing and moving systems, or can be used on standard shelving.•Bins are made of high-density polypropylene and

are unaffected by weak acids and alkalis•Fully interchangeable with all popular brands of

hanging/stacking bins•Large front label slot allows

larger bar code scanning•Full-width lip on back of bin

supports bin on hanging systems•Autoclavable up to 250˚F •FDA approved

SAVEUP TO

30%Hanging/Stacking Bins

$1795As Low As

$1795

Stacking U-Racks for Bar StorageModular Storage of Bar, Pipe & Tubing Stock

Portable U-Racks require virtually no set-up time and are easily handled by just one person. Each rack has double welded construction. Load capacities can be varied by moving racks closer together or farther apart. Racks can be stacked up to 4 high.•153⁄4" clear height •Orange enamel finish•10,000 stacking

capacity per pair •Inside width:

161⁄2" base, 221⁄2" top•Wt.: 27 lbs.


$6995Reg. Price$84.98

SAVEOVER

15%

Locking Service CartLocking drawer and locking top are keyed the same.•16W x 351⁄4H x 30"L • 4" wheels—2 locking and 2 standard •Chrome 16 gauge steel frame •3" deep shelves with

friction slides •350 lbs. load capacity•65 lbs.

SAVE37%


$115 Reg. Price$183.98

Shop Desk

Handy, sloping writing surface with penciland paper compartments. Drawer has lock and key, and glides on nylon rollers.•Dimensions: 341⁄2W x 30D x 53"H•Wt.: 105 lbs.

CLASS 70

SAVE38%


$129 Reg. Price$208.98

CombinationCabinets

Store Clothing & Supplies Securely in a Single Cabinet.• 3-point locking

mechanism with 2 keys

• Rugged all-steel construction for a lifetime of service

• Easily assembled • Durable powder-coat finish• 36W x 18D x 72"H • Wt.: 115 lbs.Includes: 18" coat rod, full-width top shelf and4 storage shelves that adjust on 2" centers.

CabinetColor Model #Gray TJ990-3736Tan TJ990-3737Black TJ990-3738

SAVEOVER

35%

$179Your Choice

$179 Reg. Price$287.98

64-65 EH 10-11 Shop/MatHand_Layout 1 10/15/10 10:27 AM Page 2















































Material Handling & Storage

66


Professional SeriesTool StorageExtra Wide for More Storage

•Full-extension drawer slides provide easy access and carry heavy loads

•Strong double-wall construction •14-gauge caster channels; 5 x 2" casters11-Drawer Chests•401⁄2W x 16D x 20"H•9,267 cu. in. capacity • Wt.: 122 lbs.Mfr's # WI-1511 12-Drawer Carts•Ball-bearing slides

on top drawer•41W x 18D x 41"H•17,493 cu. in. capacity • Wt.: 247 lbs. Mfr's # WI-1512

$29495Your Choice

$29495

$52495Your Choice

$52495Mfr's List$1,158.89

Chest Cart Color Model # Model # Black TJ307-1045 TJ307-1046 Blue TJ307-1047 TJ307-1048 Brown Wrinkle TJ307-1049 TJ307-1050 Red TJ890-9348 TJ890-9349

11-Drawer Chests

12-Drawer Carts

11-Drawer Chest

12-Drawer Cart

SAVE54%

Mfr’s List$643.87

• Reinforced side-wall construction• Full-extension drawer slides• External lock bar provides visual

proof of security

Shop SeriesTool Storage

IntermediateChest

7-Drawer Chest

No. of Overall Dimensions Mfr's SaleDrawers W x D x H Mfr's # Model # List PriceIntermediate Chest3 263⁄32 x 12 x 111⁄2" ML-303 TJ307-1051 $138.75 $69.95Chest4 263⁄32 x 12 x 153⁄8 ML-400 TJ327-6153 161.89 79.956 263⁄32 x 12 x 153⁄8 ML-600 TJ327-6154 178.16 89.957 263⁄32 x 12 x 171⁄2 ML-777 TJ890-9829 192.01 99.95

$6995As Low As

$6995SAVE

UP TO

50%Hi-JackWith a Standard Steel V-Head

•Supports up to 2000 lbs. • Accommodates pipe from 1⁄2 to 12" in diameter •11⁄2" acme threads for fine adjustment•Locking ring for faster adjustment • Set screw for extra safety •Rustproof and weather-proof finish • 28 to 52" in height


$7999Reg. Price$136.98

SAVE41%

•30 pre-labeled compartments•Holds 1⁄8, 3⁄16, 1⁄4, 5⁄16, 3⁄8,

7⁄16, 1⁄2, 9⁄16, 5⁄8, 3⁄4, 7⁄8 & 1"•145⁄8L x 73⁄8W x 73⁄4"H•Color: Gray•Wt.: 101⁄4 lbs.

End MillDispenser


$6995Reg. Price$89.98

SAVEOVER

20%

•Professional grade • Full-extension, ball-bearing slides•Brown wrinkle finishChests •Holds up to 75 lbs. per drawer•Internal keyed locking system•Includes tote tray, handbook divider

& organizer tray in bottom 4" drawer•7-year warrantyCabinets•Holds up to 1200 lbs.•5 x 2" casters•Ergonomic tubular

side handle

26" Tool Storage

Roller Cabinet

No. of Wt. Mfr's Sale Drawers W x D x H Mfr's # Lbs. Model # List Price Machinist Chests 5 263⁄32 x 12 x 157⁄16" TR61205B 51 TJ326-1025 $414.00 $229.99 6 263⁄32 x 123⁄32 x 193⁄4 TR61206B 65 TJ326-1026 540.95 289.99 7 263⁄32 x 173⁄4 x 193⁄4 TR61807B 105 TJ326-1027 641.29 359.99 Intermediate Chests 3 263⁄32 x 123⁄32 x 125⁄16 TR51203B 38 TJ326-1023 265.52 149.99 4 26 x 173⁄4 x 135⁄16 TR51804B 57 TJ326-1024 390.46 189.99 Roller Cabinets 4 261⁄2 x 18 x 343⁄4 TR71804B 125 TJ326-1029* 592.64 329.99 7 261⁄2 x 18 x 343⁄4 TR71807B 137 TJ326-1030 713.57 369.99 8 261⁄2 x 18 x 411⁄8 TR71808B 132 TJ326-1031 862.30 489.99

MachinistChest

IntermediateChest

SAVEUP TO

51%$14999Starting At

$14999

*With bulkstorage unit

Rectangular Tray

Round Collector

Magnetic Trays& Collectors

•Holds both heavy tools and small iron/steelparts such as retaining nuts, bolts, washers,sockets and small tools

•May be used in any position, even upside down

•Magnetic base with non-marking coating

Reg. SaleShape Length Width Dia. Model # Price PriceRectangular 9.53" 5.59" — TJ327-0068 $18.64 $12.95Round — — 5.91" TJ327-0071 10.46 6.95

$695Starting At

$695

66-67 EH 10-11 MatHand_Layout 1 10/15/10 10:27 AM Page 1



























Material Handling & Storage

5-DrawerCabinet

27" Roller Cabinets•18" deep friction or ball-bearing

slide drawers•Four casters: 2 rigid, 2 swivel w/toe locks •Complete with cylinder lock and keys •Tamperproof internal locking system5 Drawer•Has swing-down panel

that conceals and secures storage compartment

$475As Low As

$4757-Drawer Cabinet

SAVE41%

No. of Wt. Mfr's Sale Drawers Mfr's # Lbs. Model # List Price Friction Slides 5 275B 121 TJ811-3338 $816.00 $475.00 7 277B 138 TJ811-3342 950.00 555.00 Ball-Bearing Slides 5 275XB 125 TJ990-3525 926.00 545.00 7 277XB 142 TJ990-3523 1,110.00 649.00 8 378XB 165 TJ990-3500 1,118.00 659.00

Lifetime Warranty

Heavy-Duty Polyester Ratchet Straps

$1895As Low As

$1895SAVE

UP TO

24%•Each strap has double “J” hooks at end of webbing•5000 lbs. maximum

load capacity•1650 lbs. maximum safe

work load per strap•2" width • Color: Yellow

Reg. Sale L Model # Price Price15' TJ317-1793 $24.95 $18.9525 TJ317-1794 27.98 21.95

•Smooth action, full-extension drawer slides •Large molded top with several storage

compartments as well as a cord wrap

•External lock bar with a keyed lock

•4 x 2" casters •Black smooth •261⁄2W x 18D

x 325⁄16"H •Ship wt.: 90 lbs.Mfr's # ML-510

Project Center26" 5 Drawer


$15599Mfr's List$273.48

SAVE43%

7-DrawerCabinet

•Wool-felt-lined drawers and top till with dividers, cylinder lock and key

•Fits on 27 and 29" roller cabinets7-Drawer Chest •Vinyl-cushioned, steel-core top handle8- and 11-Drawer Chests •Chrome side handlesMachinist's Chest Bases Offers two extra drawers for storage below the chest or on top of the roller cabinet

Machinist's Chests & Bases

No. of Wt. Mfr's Sale Drawers W x D x H Mfr's # Lbs. Model # List Price Chests 7 201⁄8 x 81⁄2 x 135⁄8" 520 35 TJ811-3320 $338.00 $199.00 8 263⁄4 x 81⁄2 x 135⁄8 526 44 TJ811-3326 428.00 254.00 11 263⁄4 x 81⁄2 x 18 52611 56 TJ811-3330 538.00 319.00 11 261⁄2 x 12 x 187⁄8 3611 84 TJ505-1639 928.00 549.00 Bases 2 215⁄8 x 95⁄8 x 77⁄8 MC22 20 TJ811-3334 194.00 115.00 use with chest 520 2 281⁄8 x 95⁄8 x 77⁄8 MC28 23 TJ811-3240 210.00 125.00 use with chests 526, 52611 2 263⁄4 x 121⁄2 x 91⁄2 5150 37 TJ811-3324 210.00 125.00 use with chests 526, 52611, 3611

Base

$115As Low As

$115

LifetimeWarranty

Chest

SAVE40%

•Red core warning yarns aid visual inspection

•Sewn-in leather tag with belt width, length and load capacity

Tuff-Edge II™ SlingsEye & Eye Type

1 Ply Mfr's Sale 2 Ply Mfr's Sale Length Model # List Price Model # List Price 1" Web Width 3' TJ828-9670 $19.70 $11.99 TJ307-3252 $24.01 $14.99 4 TJ828-9671 21.20 12.99 TJ307-3253 27.23 16.99 6 TJ828-9672 24.20 14.99 TJ307-3254 33.67 20.99 8 TJ828-9673 27.20 16.99 TJ307-3255 40.11 24.99 2" Web Width 3 TJ307-3250 29.91 15.99 TJ307-3256 34.64 18.99 4 TJ307-3251 32.67 16.99 TJ307-3257 40.46 21.99 6 TJ828-9676 38.19 18.99 TJ307-3258 52.10 27.99 8 TJ828-9677 43.71 20.99 TJ307-3259 63.74 33.99 10 TJ828-9678 49.23 22.99 TJ307-3260 75.38 39.99

SAVEUP TO

53% Width Vertical Choker Basket 1 Ply 1" 1600 lbs.1250 lbs. 3200 lbs. 2 3200 2500 6400 2 Ply 1 3200 2500 6400 2 6400 5000 12,800

Load Capacity Usage

$1199As Low As

$1199

Get more floor space—store long items vertically.•Perfect for flat stock, drill rod, threaded rod, pipe

and other hard-to-store items • 3000 lbs. capacity •84" overall ht. • All-steel welded construction •Base measures 36W x 24"D •Arms extend 8" beyond shelves •Shipped knocked down •Weight: 141 lbs.

Vertical BarStorage Rack SAVE

14%


$23995Reg. Price$279.98

66-67 EH 10-11 MatHand_Layout 1 10/15/10 10:28 AM Page 2





































The Lowest Prices in thePower Tools

68

Ergonomic Random Orbital Sander5" Pad Diameter Industry’s Lightest Full-Size Random Orbital Sander• Low profile for outstanding control • Low air consumption and vibration • 12,000 rpm free speed • 3⁄16" orbit pattern • Includes three interchangeable gripsMfr's # MP4400-05

SAVE33%


$15895Mfr's List$239.00

•Quick-Change™ Wheel Release •Jam-pot, low-profile gear case •11,000 rpm •5⁄8"-11 spindle thread•Oversized protected spindle

lock button Includes: Two-position side handle, adjustable guard and wrench. D28112, D28402 & D28402N•Dust Ejection System™ (DES) •Keyless adjustable guard •One-piece brush arm

*No lock-on switch

41⁄2 " Electric Angle Grinders

Mfr's SaleAmps Mfr's # Model # List PriceWith Slide Switch7 D28110 TJ319-4134 $111.32 $61.9510 D28112 TJ319-4135 165.96 92.95With Paddle Switch10 D28402 TJ308-0841 165.96 87.9510 D28402N TJ327-3898* 165.96 85.00

$6195As Low As

$6195

SAVEUP TO

48%

Mfr's List$167.86

PneumaticPencil Grinder•Good power-to-size ratio •Easy maneuverability •Ideal for intricate work •5.25" length•Suitable for intermittent

use in industrial maintenance or non-intensive production • 60,000 rpm

•1⁄8" collet spindle •1⁄4" air inlet •7 cfm •Air hose includedMfr's # RP9104 $8995


$8995

SAVEOVER

45%

•Handle rotates 360° • 16,000 rpm •Rear exhaust • 90 psi air pressure • 161⁄2" length • 1⁄2 x 24" belt • 14.2 cfm

Mini Air BeltSander


$7995Reg. Price$151.98

SAVE47%

1⁄4" Air DieGrinders

•1⁄4" collet •90 psi air pressure • Rear exhaust • Straight has self-locking

throttle lever to prevent accidental starting

Right Angle: 3 cfmAir Inlet Thread: 1⁄4"Hose Size: 3⁄8" id

Specifications

Right Angle

Straight

$1895As Low As

$1895

SAVEUP TO

53%

No Load Reg. SaleDescription Speed rpm Model # Price PriceStraight 22,000 TJ337-0045 $40.80 $18.95Right Angle 20,000 TJ337-0042 43.65 21.95

ElectricEngraver


$1599Mfr's List$25.50

Carbide Engraving PointModel # TJ804-1026 Mfr's List: $6.22 Sale Price: $4.95Diamond Engraving PointModel # TJ422-1408 Mfr's List: $19.16 Sale Price: $14.95

Accessories

SAVE37%

•Works as easily as writing with a pencil, on all types of materials from hardened steel to glass

•Delivers 7200 spm •Furnished with

a carbide engraving point

Mfr's # 290-01

$6899As Low As

$6899

For Hand Finishing Work•90 psi • 1⁄4" air inlet•Includes 1⁄8" collet

wrench and 3' air hose with plastic protective sleeves

1⁄8" Precision AirDie Grinders

Reg. SaleDescription L x Dia. rpm Model # Price PriceStraight 5.2 x .6" 56,000 TJ328-1071 $91.98 $68.99Angle 5.35 x .6 22,000 TJ801-1685 161.98 109.95Grinding Wheel (for TJ801-1685) TJ801-1686 3.14 2.95

SAVEUP TO

32%14″ AbrasiveChop Saws

• 3900 rpm • 1" arbor hole • 15 amps3.2 hpIncludes vise, abrasive wheeland hex wrench.Mfr's # 6176-20

5.4 hpIncludes abrasive wheel.Mfr's # 6180-20


$16595Mfr's List$306.00


$22995Mfr's List$366.00

SAVEUP TO

45%

Gift Ideas For The Holidays!Gift Ideas For The Holidays!

68-69 EH 10-11 Power Tls Bkg_Layout 1 10/15/10 10:28 AM Page 1



















Industry GUARANTEED! Power Tools


1⁄4" Heavy-Duty Die Grinders •Rear exhaust•Safety lockout feature

prevents accidental start-ups • 3⁄8" hose • 90 psi

Right Angle

Straight

Motor Mfr's SaleDescription hp Length Mfr's # Model # List PriceStraight 1⁄3 63⁄4" FP-757TK TJ325-1591 $145.95 $59.99Right Angle 1⁄2 61⁄4 FP-759RT TJ325-1633 143.85 95.99

SAVEUP TO

58%

18V 2 Pc. Compact Drill/Driver& Impact Driver Combo Kit

Includes:•1⁄2" drill/driver with

400 in./lbs. torque •1⁄4" hex impact driver with

4-pole frameless motor and 1400 in./lbs. torque

•(2) 18v lithium-ion batteries•30-minute charger •Carrying caseMfr's # 2691-22


$229Mfr's List$554.50

SAVE58%

Includes: 2 battery packs, 1-hour charger and case.1⁄2" Driver Kits•LED worklight • 2000 max. rpm • 450 uwoIncludes: 1-hour charger, (2) XRP™ batteries, 360° side handle and case.

Drill/Driver Kit•All-metal, single-sleeve keyless ratcheting chuckMfr's # DCD940KXModel # TJ328-1973 Mfr’s List $516.74 Sale Price $275.00

Hammerdrill/Drill/Driver Kit•0-500/0-1250/0-2000 rpm•DeWALT exclusive all-metal, self-tightening chuck provides

2x greater bit holdingMfr's # DCD950KXModel # TJ337-0312 Mfr’s List $535.98 Sale Price $295.001⁄2" Impact Wrench Kit•Square drive with detent pin retention •Compact size and weight • 1740 in./lbs. torque, 0-2700 ipmMfr's # DC820KAModel # TJ327-3883 Mfr’s List $453.58 Sale Price $274.981⁄2" High-Torque Impact Wrench Kit•Patented shear-resistant square drive•3600 in./lbs. torque, 0-2600 ipmMfr's # DW059K-2Model # TJ619-3471 Mfr’s List $603.56 Sale Price $295.00

18V XRP™ Cordless Tool Kits

DW059K-2

DCD950KX

SAVEUP TO

51%

DC820KA

Mfr's List$98.69

•Compact, lightweight design for easy maneuverability

•90° angle head •22,500 rpm • 43⁄4" length •51⁄2 cfm avg.

air consumption •1⁄4" NPT

air inlet •3⁄8" min.

hose size Mfr's # CP875

1⁄4" Mini AngleDie Grinder


$49

SAVE50%

•2-position handle •Quick-release

chuck •80 in./lbs.

torque • 500 rpmIncludes:Screwdriver, (2) 7.2v batteries, 1-hour charger, 2 screwdriver bits and case.Mfr's # DW920K-2

7.2V CordlessScrewdriver Kit

$8895OnlyModel# TJ890-9657

$8895Mfr's List$139.66

SAVE36%

1⁄4" Air Die Grinders•Convenient built-in speed regulator•Straight grinder is rear exhaust•Right angle is front exhaust•Safety throttle •1⁄4" collet

Mfr's SaleDescription rpm Mfr's # Model # List PriceStraight 22,000 5054 TJ505-3202 $100.50 $54.95Right Angle 20,000 5055 TJ505-3203 129.10 65.95

Straight

SAVEUP TO

48%$5495Starting At

$5495

Right Angle

1⁄4" Pneumatic 90°Die Grinder & Kit

Reg. SaleDescription Model # Price PriceDie Grinder Only TJ890-0008 $40.98 $27.99Die Grinder Kit TJ505-3197 51.98 34.99

Die Grinder•Rear exhaust with lever throttle; hardened gearing,

20,000 rpm, 3⁄8"-24 spindle, 51⁄2" length, 3 cfmKit includes: • Die grinder •5 pc. 1⁄8" arbor stones •5 pc. 1⁄4" arbor stones •1⁄8" collet insert • Hose

adapter • Open collet changing wrenches

•Molded case

SAVEOVER

30%

$2799As Low As

$2799


68-69 EH 10-11 Power Tls Bkg_Layout 1 10/15/10 10:28 AM Page 2














Hand Tools FAST & FRIENDLY Customer

70

28 Pc. TransferPunch Set

•For accurate transferring of drilled or tapped holes

•Heat-treated steel •Stand includedSizes: 3⁄32-1⁄2" x 64ths & 17⁄32"



SAVE54%

•Changeover in less than 1 minute

•1⁄8 to 1⁄4" size range Includes: •Rivet tool•4 nose pieces for blind rivets:

1⁄8, 5⁄32, 3⁄16, 1⁄4"•5 rivet nut mandrel w/nose pieces:

8-32, 10-32, 1⁄4-20, 5⁄16-18, 3⁄8"-16•Plastic case

10 Pc. 2-in-1 Blind Rivet/Rivet Nut Installation Tool


$7998Reg. Price$89.98

SAVEOVER

10%

Set Blind Rivets& Rivet Nuts!

•Non-sparking hammers made of UNI-CAST™ construction have no exposed metal

•Soft face yields and won't mar surfaces•Slimline models ideal

for confined areas

Compo-Cast® Dead Blow Soft FaceHammers

Head Face Head Overall Mfr's SaleWt. Dia. Length Length Mfr's # Model # List PriceStandard10 oz. 113⁄64" 31⁄8" 101⁄8" 57-530 TJ800-0310 $30.99 $13.9918 139⁄64 33⁄4 111⁄4 57-531 TJ800-0312 38.96 16.9521 151⁄64 41⁄4 127⁄8 57-532 TJ800-0314 45.33 19.9542 27⁄64 43⁄4 141⁄4 57-533 TJ800-0316 63.92 29.9552 233⁄64 51⁄4 151⁄4 57-534 TJ800-0318 88.29 39.95Slimline5 57⁄64 3 93⁄8 57-540 TJ800-0320 28.90 12.9514 119⁄64 41⁄4 109⁄16 57-541 TJ800-0322 36.41 15.9518 133⁄64 41⁄2 121⁄8 57-542 TJ800-0324 39.29 17.9521 117⁄32 51⁄4 127⁄8 57-543 TJ800-0326 48.52 20.95

Slimline

SAVEUP TO

56%$1295As Low As

$1295

Mfr's Warranty

Plastic Coated

•Position upper jaw to the workpiece, push button and close lower jaw

•Numerous jaw positions and openings•Chrome vanadium electric steel, oil

hardened and tempered•Gripping surfaces have special teeth, hardened

to 61 HRC • Does not protect against electric shock

Cobra® Water Pump Pliers

Non-Slip PlasticNo. of Mfr's Sale

OAL Capacity Positions Grips Model # List Price7" 11⁄4" 12 Non-Slip Plastic TJ240-1505 $37.38 $25.9910 11⁄2 11 Non-Slip Plastic TJ240-1506 42.14 27.9912 2 14 Non-Slip Plastic TJ240-1507 58.30 39.9916 31⁄2 27 Plastic Coated TJ240-1508 96.02 61.99

SAVEUP TO

35%Ratcheting CombinationWrench Sets

8 Pc. ReversibleCombination

*Jumbo style–long length

Mfr's SaleSet Sizes Mfr's # Model # List PriceCombination7 Pc. Inch 3⁄8-3⁄4" BW-1250 TJ308-0061 $89.43 $48.957 Pc. Metric 10, 12-16, 18mm BW-1251 TJ308-0062 89.43 48.95Reversible Combination 8 Pc. Inch 5⁄16-3⁄4" BW-1400 TJ308-0638 137.58 74.957 Pc. Inch 13⁄16-1 1⁄4" BW-1401 TJ317-7002* 349.03 189.9512 Pc. Metric 8-19mm BW-1450 TJ308-0639 202.30 109.95

$4895As Low As

$4895

Mfr's Warranty•Full-polished chrome•Through-bolt access for long bolts • Ratcheting box end

SAVE45%

Standard

Includes:1⁄2" Drive•72-tooth, quick-release drive •5" extension•10 pc. 6 pt. sockets: 1⁄2, 9⁄16, 5⁄8, 3⁄4,

7⁄8";15, 17, 18, 19, 21mm

148 Pc. ProfessionalTool Set

3⁄8" Drive•72-tooth, quick-release drive • 3" extension •6" extension • 3⁄8 to 1⁄4" drive adapter •5⁄8 & 13⁄16" spark plug sockets•16 pc. 12 pt. sockets: 5⁄16, 3⁄8, 7⁄16, 1⁄2, 9⁄16,

5⁄8, 11⁄16, 3⁄4"; 9, 10, 12, 13, 14, 15, 17,19mm

•10 pc. 12 pt. deep sockets: 7⁄16, 1⁄2, 9⁄16,11⁄16, 3⁄4"; 12, 13, 14, 16, 17mm

1⁄4" Drive•72-tooth, quick-release drive • 3" extension•20 pc. 6 pt. sockets: 3⁄16, 7⁄32, 1⁄4, 9⁄32, 5⁄16,

11⁄32, 3⁄8, 7⁄16, 1⁄2, 9⁄16", 4-13mmCombination Wrenches•12 pcs.: 5⁄16, 3⁄8, 7⁄16, 1⁄2, 9⁄16,

5⁄8"; 8, 10, 12, 13, 14, 15mm •2 pliers: 8" long nose & 6" diag. cuttingMagnetic Screwdrivers•1⁄4 x 4" slotted, 3⁄16 x 3" slotted, #2 x 4"

Phillips, #1 x 3" PhillipsAlso includes:•44 pc. 1" driver

bits & holders •18 hex keys

and holders •Storage case

Limited Lifetime Warranty

SAVE47%


$7495Mfr’s List$141.30


70-71 EH 10-11 HandTls Bkg_Layout 1 10/15/10 10:29 AM Page 1






















Service – 800-USE-ENCO Hand Tools


Mfr's SaleSet Model # List Price9 Pc. TJ505-0308 $16.78 $5.5513 Pc. TJ505-0307 20.18 6.5522 Pc. TJ800-0177 36.98 9.95

•Ball design allows 360° rotation at a 30°angle

9 Pc. Metric Set: • Sizes: 1.5-10mm13 Pc. Fractional Set: • Sizes: .050-3⁄8"22 Pc. Combination Set: •13 inch sizes: .050-3⁄8" • 9 metric sizes: 1.5-10mm

Ball-Hex-L™ Key Sets

SAVEUP TO

73%$99522 Pc. Set Only

$995

GoldGuard™ BalldriverBall End Hex Key Sets14K Gold Plated for CorrosionResistance & Easy Identification

9 Pc. Set—1.5-10mm13 Pc. Set—.050-3⁄8"22 Pc. Combo Set—.050-3⁄8" and 1.5-10mm

$229922 Pc. Set Only

$2299

Mfr's SaleSet Model # List Price9 Pc. Metric TJ308-0643 $19.00 $11.3913 Pc. Inch TJ308-0642 23.45 13.9922 Pc. Combo TJ308-0641 40.00 22.99

SAVEUP TO

42%

Regular Tip

Swivel Pad

Locking C-ClampsRegular & Swivel Pads•Easy-release

lever

Jaw Mfr's SaleL Cap. Throat Mfr's # Model # List PriceRegular Tip6" 21⁄8" 11⁄2" 6R TJ800-1116 $16.10 $8.599 41⁄2 43⁄4 9DR TJ891-4300 21.33 13.8911 33⁄8 25⁄8 11R TJ800-1111 27.14 14.7918 8 91⁄2 18R TJ505-0448 39.36 22.9924 121⁄2 151⁄2 24R TJ240-1522 49.73 28.99Swivel Pad6 21⁄8 11⁄2 6SP TJ505-0449 18.14 10.499 41⁄2 43⁄4 9SP TJ240-1521 22.93 14.8911 33⁄8 25⁄8 11SP TJ505-0450 29.22 16.9918 8 91⁄2 18SP TJ505-0451 41.42 23.9924 10 151⁄2 24SP TJ240-1520 51.79 31.99

$859Starting At

$859

SAVEUP TO

46%

MagicRing Ball End Hex Key Sets

• Hard chrome, super-durable, corrosion-resistant finish

• Steel compression ring securely holds fasteners

Retaining Ring Holds Fasteners

Mfr's SaleDescription Model # List Price9 Pc. Metric (1.5-10mm) TJ337-0323 $32.78 $21.9513 Pc. Inch (.050-3⁄8" ) TJ337-0324 40.98 25.9522 Pc. Combo(.050-3⁄8" & 1.5-10mm) TJ337-0325 71.12 42.95

Holds the Screw in Place SAVEUP TO

39%

•Satin-chrome finish with heavy-duty jaws and handles

•Nickel-plated finish resists rust •WR Series: Built-in wire cutterIncludes: 5WR, 6LN, 7CR, 10R and 10WR. Mfr's # 2077704

Locking Plier SetWith BONUS Irwin Bag


$4595Mfr's List$76.58

SAVE40%

8-in-1 “BitFlip” Magnetic Driver SetsStandard & Insulated

• Strong rare earth magnets • Hardened tool steel shafts• Precision-machined 1⁄4" insert bits • Bits store in ergo cushion grip handle• Insulated sets are 1000v rated and tested to 10,000vStandard SetsPhillips/Slotted/Square•Phillips: #0, #1, #2, #3; Slotted: 3⁄16, 1⁄4"; Square: #1, #2Torx®: T8, 10, 15, 20, 25, 27, 30, 40Insulated SetsPhillips/Slotted/Square•Phillips: #0, #1, #2, #3; •Slotted: 3⁄16, 1⁄4"; Square: #1, #2Phillips/Slotted•Phillips: #0, #1, #2, #3; Slotted: 3⁄16, 7⁄32, 1⁄4 , 5⁄16"

Torx® Phillips/Slotted

Torx® is a registered trademark of Acument Intellectual Properties LLC.

Rapid Access 8-BitFlip-Out Tray

Mfr's SaleDescription Model # List PriceStandardPhillips/Slotted/Square TJ337-0319 $30.78 $18.95Torx® TJ337-0320 30.78 18.95InsulatedPhillips/Slotted/Square TJ337-0321 32.98 19.95Phillips/Slotted TJ337-0322 32.98 19.95

$1895As Low As

$1895

SAVEUP TO

39%


70-71 EH 10-11 HandTls Bkg_Layout 1 10/15/10 10:29 AM Page 2

























Vol. 10C Issue TJ

PRSRT STDU.S. Postage

PAIDEnco

Enco TM

400 Nevada Pacific Hwy.Fernley, NV 89408

HOTdealsHOTWe gladly accept

TJ03

Mon.–Fri. 8am-8pm ET•Sat. 8am-5pm ET • 24 hour fax ordering 800-965-5857

800-USE-ENCO (800-873-3626)use-enco.com

400 Nevada Pacific Hwy., Fernley, NV 89408

Special DutyL-Clamps

Set of 2Clamping Spindle With BONUS Reg. Sale

Cap. Pressure Dia. Model # Price Price6" 1500 lbs. 1⁄2" TJ891-8781 $87.96 $49.958 1500 5⁄8 TJ891-8782 107.96 59.9510 2600 5⁄8 TJ891-8783 149.96 84.9512 2600 3⁄4 TJ891-8784 181.96 99.95

•All-steel construction

•Quick-actionclamping arm

•Swivel pad• 43⁄4" throat depth

BONUS Info:• 4" C-Clamps with 6 and 8" L-Clamps• 6" C-Clamps with 10 and 12" L-Clamps

BUY 2 L-CLAMPS

& GET 2 BONUS C-CLAMPS!

(UP TO $57 VALUE)

Drill Sets42 Pc. Split Point® Drill Bit & Screwdriver SetIncludes: 13 Pc. 135˚ Split Point Black Oxide Set with TOUGH CASE™Container and 29 Pc. Screwdriving Set:•12 Phillips 1" bit tips• 4 slotted 1" bit tips•8 square recess 1" bit tips•#2 Phillips 2" power bit •#2 square recess 2" power bit•1⁄4, 5⁄16" nutdrivers • 2" magnetic bit tip holderMfr's # DWBODDBAG

43 Pc. Pilot Point® Drill Bit & Screwdriver SetIncludes:14 Pc. Pilot Point® Gold Ferrous Oxide Set with TOUGH CASE™ Container and 29 Pc. Screwdriving Set: •12 Phillips 1" bit tips • 4 slotted 1" bit tips •8 square recess 1" bit tips • #2 Phillips 2" power bit •#2 square recess 2" power bit•1⁄4, 5⁄16" nutdrivers •2" magnetic bit tip holderMfr's # DWDDBAG

INCLUDES HEAVY-DUTY

181⁄2" TOOL BAG


$32 Mfr's List$46.56


$32 Mfr's List$45.00

5 Pc. Hook, Pick& Magnet Set

Includes: Straight, circular, 45° and 90° picks with black-oxide finish,1.5 lb. magneticretriever and storagecompartment.


$1069Reg. Price$17.81

SAVE40%

Machinist Tool Kit

Includes:•0-1" micrometer, .0001" graduations,

ratchet thimble, lightweight enamelcoating

•0-6" dial caliper, .001" graduations•Fine adjustment magnetic base that

accepts lug back indicator•0-1" dial indicator, .001" graduation,

0-100 reading, revolution counter


$5595Reg. Price$113.98

SAVE50%

2 Pc. 12" Mini-BarClamp/Spreaders

•One-handed control trigger • For use in a wide range of light-duty woodworking applications

•Durable internal spring mechanism • Throat depth: 21⁄2"

•Clamping pressure: 165 lbs.•Dual component, overmold,

non-slip handles•Non-marring jaws • 181⁄2" OAL


$1149Reg. Price$31.98

SAVEOVER

60%

01-72 EH 10-11_Layout 1 10/15/10 10:00 AM Page 1











Documents

November HOTdeals