Nippon Paint Momento lets you recreate intricate works of Italian craftsmanship in your home with its distinctive special effects that turn ordinary walls into extraordinary masterpieces. Formaldehyde-free, Nippon Momento is formulated with low VOC and contains no lead or mercury.

Nippon Paint Momento comes in a selection of top coat finishes: Momento Textured series Elegant: Introduces a luxurious finish to walls for a stylish impression. Momento ENhancer Series (Snow Frost, Pearl Frost and Gold Frost): Inspired by a crisp winter’s day and translated into splendor and sophistication with an added brilliance to walls.

NIPPON PAINT MOMENTO ELEGANT

Feature Action Benefit

Extended Open TimeIts special additves allow easy application without much effort to give good design.

Good Impression of design ,no patchiness in the design

Excellent washability Makes the surface easier to clean Trouble free cleaning of the walls

Fungal Resistance Effectively hides any kind of stains/spots or defects on the wall

Gives a luxurious look and blemish free finish to the walls.

Where To use : For decoration of interior walls, ceilings, cement based plaster, gypsum based plaster, brickwork, hard and soft boards and asbestos.

Technical Data (Specification Data)

Bases:ME Base,Snow Frost,Gold Frost & Pearl Frost Colour range: Please refer to Nippon Paint shade card and fan decks Finish: Smooth Finish Coverage*: 50 -70 sq.ft/Lit/Coat (Actual coverage is based on texture required and painter application) Dry time: To Touch: 3-4 Hours Gloss level: Matt Clean up solvent: Clean, Potable water Stability of diluted paint: Use within 24 Hours Shelf life: 1 Year from the date of manufacture in original tightly closed containers . Dilution: No Dilution

Nippon TDS A4 Size

NIPPON PAINT (INDIA) PRIVATE LIMITED, 9th Floor, East Wing, KRM Centre, No.2, Harrington Road, Chetpet, Chennai - 600 031,Tamil Nadu, India. Ph: 044 - 42982222, Fax: 044 - 42982200, Email: tu@nipponpaint.co.in, Toll-free No: 1800-425-3636, SMS ‘NIPPON’ at 53636

Standard Application SystemKeep surface clean & dry. Remove dust, dirt, grease and any flaking paint from the surface and sand to smooth.Ensure there is no fungus or moisture on the wall. Surface Preparation:

NIPPON PAINT (INDIA) PRIVATE LIMITED, 9th Floor, East Wing, KRM Centre, No.2, Harrington Road, Chetpet, Chennai - 600 031,Tamil Nadu, India. Ph: 044 - 42982222, Fax: 044 - 42982200, Email: tu@nipponpaint.co.in, Toll-free No: 1800-425-3636, SMS ‘NIPPON’ at 53636

Recommended Paint SystemMomento ENhancer Series (Snow Frost, Pearl Frost and Gold Frost)

Sequence Product No. of Coats

Note : For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure a drying time of at least 2 weeks before cleaning.

Nippon TDS A4 Size

Primer

Putty

Nippon Paint Multi-Purpose Wall Sealer/Interior Primer Apply 1 coat and allow to dry for 6-8 hours

Primer Nippon Paint Multi-Purpose Wall Sealer/Interior Primer Apply 1 coat and allow to dry for 6-8 hours

Base Coat Satin Glo+ Luxury Interior Wall finish Apply 2-3 coats in an interval of 4-6 hours

Top coat Momento Enhancer Series (Snow Frost, Pearl Frost and Gold Frost)

Apply 1 coat of Momento Enhancer Series(Frost) in a 450 strokes in one direction using special type of momento brush.

Apply Nippon Acrylic Putty 1-2 coats for smoothening of surface. Allow to dry overnight.Nippon Acrylic Wall Putty

Momento Textured Series ( Elegant)Sequence Product No. of Coats

Primer

Top coat

Momento Primer Apply 2 coat with an interval of 2-3 hours. Dilute upto 5% with potable water.Apply 1 coat of Momento Textured Series ( Elegant) using a thick scoop of paint and spread in criss-cross manner using Momento Brush.After 20-30 min when it is semi dried use Momento plastic spatula to gently smooth over the painted surface.

Momento Textured Series (Elegant)

Precautions

Avoid painting when the temperature is below 10 degrees Celsius. Painting is not recommended if the moisture content and alkalinity of the walls is high. Moisture content of the walls should be below 16% (measured by Protimeter) and alkalinity of the wall should be below pH-9. Relative humidity should be below 85%. Painting on a newly plastered wall is recommended after 12 weeks of curing.

Always work in a well ventilated area. Wear appropriate attire, especially gloves and eye protection gear. Avoid contact with skin as it may cause irritation.

Clean all equipments with clean water immediately after use.

In case of eye contact rinse immediately with water and seek immediate medical treatment. To remove paint from skin, use soap and water or appropriate cleanser. In the event of spillage, contain and collect split paint by using sand or earth.

Store paint in a cool, dry and well ventilated place away from heat sources, flammables or direct sunlight. Keep container tightly closed in a secure, upright position. Do not store near food, drink or animal feed. Keep out of reach of children. Do not dispose of unwanted paint into drains, water sources or open sewers. To dispose safely, pour unwanted paint onto old newspapers and let dry before placing in a proper waste receptacle

Does not contain any added lead, mercury or chromium compounds.

Safety health & Environmental information

During painting

Cleaning

Safety instructions

Storage

Environment