Embed Size (px)
Citation preview
Dr. Wael Fairouz EzzEldin Saleh
Mechanical Engineering Department Assiut University, Assiut, Egypt 71516
Office Tel: (+20) 88-2411239 Cell Tel: (+20) 127432985
EDUCATION:
Ph.D. in Mechanical Engineering October, 2008
Concordia University, Montreal, Canada.
Thesis Title: Two-Phase Flow Structure at Header-Channel Junctions - Experiments and
Modeling. GPA: 4.1/4.3.
M.Sc. in Mechanical Engineering, power branch,
Assiut University, Assiut, Egypt. July, 2002
Thesis title: Design of an Absorption Air Conditioning system for an Automobile Using the
Engine Exhaust Gases. June 2002. GPA: 83.6 % (Very Good).
B.Sc. in Mechanical Engineering, power branch,
Assiut University, Assiut, Egypt. July, 1992
GPA: 82.4%, with honor’s degree, (Very Good). Top ranked student.
M.Sc. and Ph.D. Course Work:
M.Sc. Ph.D.
1- Advanced Engineering Mathematic.
2- Applied Electronic and Computers.
3- Advanced Heat Transfer.
1- Fluid Mechanics.
2- Gas Dynamics.
3- Convection Heat Transfer.
4- Advanced Topics in Thermal Engineering
(Refrigeration).
5- Advanced Topics in Mechanical Engineering
(Internal Combustion Engine).
RESEARCH EXPERINCE: Assistant Professor May, 2010 - Present
Mechanical Engineering Department Assiut University, Assiut, Egypt Post Doctoral Fellow January 2009 – January 2010
Mechanical and Industrial Engineering Department, Concordia University, Canada.
Research Assistant September 2004 - January 2009
Mechanical and Industrial Engineering Department, Concordia University, Canada.
Assistant Lecturer July 2002 - September 2004
Mechanical Engineering Department, Assiut University, Egypt.
Research and Teaching Assistant December 1992- July 2002
Mechanical Engineering Department, Assiut University, Egypt.
TEACHING EXPERIENCE:
Mechanical Engineering Department, Assiut University, EGYPT. May 2010- Now
2004 Instructor for the following undergraduate courses:
Thermodynamics II.
Heat Exchangers.
Mechanical and Industrial Engineering Department, Concordia University, Canada
September 2004 - January 2009
Tutor and marker for the following undergraduate courses:
Thermodynamics I & II.
Heat transfer.
Fluid mechanics.
Mechanical Engineering Department, Assiut University, EGYPT. December 1992- August 2004 Tutor and marker for the following undergraduate courses:
Thermodynamics I & II.
Refrigeration and Air-Conditioning.
Heat transfer.
Fluid Mechanics I & II.
Engineering Drawing.
Machine Construction.
Hydraulic Machine.
Gas Dynamic.
Internal Combustion Engine.
Mechanical Engineering Laboratories.
Co-supervising a lot of B. Sc. Projects.
PRACTICAL EXPERIENCE: 2-D and 3-D stereo PIV measurements technique in gas and liquid field: Sep. 2004 – January 2010.
Lab assistants: September 1992 - August 2004.
Heat transfer Laboratory, Mechanical Engineering Department, Faculty of Engineering, Assiut
University, Assiut, Egypt.
COMPUTER EXPERINCE:
Computer languages: Basic, QBasic, Matlab and C++.
Computer OS: Windows and Dos.
Software: Maple 13, MS Office (ward, Excel), and Tec-plot.
REFRENCE:
Dr. Ibrahim Galal Hassan, Professor in Department of Mechanical and Industrial
Engineering, 1515 St. Catherine West, EV 004-213, Montreal, Quebec H3G 1M8
CANADA. E-mail: [email protected] Phone: (514) 848-2424 ext. 3141. Fax:
(514) 848-3175.
Dr. Lyes Kadem, Associate Professor in Department of Mechanical and Industrial
Engineering, 1515 St. Catherine West, EV 004-207, Montreal, Quebec H3G 1M8
CANADA. E-mail: [email protected] Phone: (514) 848-2424 ext. 3143. Fax: (514)
848-3175.
Awards and Honors:
Assiut University Scholarship, Assiut, Egypt. 1989-1992.
Assiut University Award, Mechanical Engineering Department. The memorial award of
Prof. Ramadan Sadek for my excellent and getting Distinction in the academic year
1989/1990.
Assiut University Award, Mechanical Engineering Department. The memorial award of
Prof. Mahmoud Hassan Seadawy for being distinguished in the “Thermo dynamics” subject
and getting a general grade of “Very Good” in the academic year 1990/1991.
Honor Certificate from AL-Ghoraba Group: For my distinction in 3nd year, Mechanical
Engineering Department (1990).
Honor Certificate from AL-Hoda Group: For my distinction in 2nd year, Mechanical
Engineering Department (1989).
I was the only student who graduated by the honors degree between my college (1992).
Journal Publications: A. F. Andaleeb,I. Hassan, W. Saleh, and T. Ahmad “Modeling of the Onset of Gas Entrainment from
a Stratified Two-Phase Region Through Branches on a Curved Surface”, Journal of Fluids Engineering,
ASME July 2006, Vol. 128 P. 717-725.
Saleh, W., Bowden, R.C., Hassan, I.G., Kadem, L., “A Hybrid Model to Predict the Onset of Gas
Entrainment with Surface Tension Effects”, Journal of Fluids Engineering, ASME January 2009, Vol.
131 : 011305-1-10.
Saleh W, Bowden RC, Hassan IG, Kadem L. “Two-Phase Flow Structure in Dual Discharging - Stereo
PIV Measurements”, Experimental Thermal and Fluid Science 2010; 34: 1016–1028
Saleh W, Bowden RC, Hassan IG, Kadem L. “Techniques of PIV in Stratified Two-Phase Headers”,
Experimental Thermal and Fluid Science 2011; 35: 82–95
Conference Publications:
Elnady T., Saleh, W., Hassan, I.G., Kadem, L., Lucas, T. Experimental investigation of new film
cooling scheme on the vane leading edge” ASME International Mechanical Engineering Congress and
Exposition (IMECE-10), November 12-18, 2010, Vancouver, British Columbia, Canada
Elnady T., Saleh, W., Hassan, I.G., Kadem, L., Lucas, T. “Experimental Investigation Of Louver
Cooling Scheme On Gas Turbine Vane” International Heat transfer Conference, IHTC-14, Aug. 8-13,
2010, Washington D.C., USA
Bowden, R.C., Saleh, W., Hassan, I.G., “A Separated Flow Model for Predicting Gas Entrainment in a
Small Branch from a Co-current Flowing Gas-Liquid Regime”, ASME 8th International Conference on
Nanochannels, Microchannels, and Minichannels, August 1-4, 2010, Montreal, Canada
Elnady T., Saleh, W., Hassan, I.G., Kadem, L., Lucas, T. “Effect of Hole Position and Shape on Film
Cooling Performance of Turbine Vane Pressure Side” ASME Power 2010, July 13-15, 2010, Chicago,
IL, USA
Elnady T., Saleh, W., Hassan, I.G., Kadem, L., Lucas, T. “Experimental Investigation Of Louver
Cooling Scheme On Gas Turbine Vane” ASME Power 2010, July 13-15, 2010, Chicago, IL, USA
Elnady T., Saleh, W., Hassan, I.G., Kadem, L., Lucas, T. “Film Cooling Performance of Shaped Hole
over Vane with flow visualization” 14th International Conference on Applied Mechanics and
Mechanical Engineering AMME-14, 25-27 May, 2010, Cairo, Egypt
Bowden, R.C., Saleh, W., Hassan, I.G., “Co-Current Stratified Gas-Liquid Flow in Horizontal Pipe
with Discharging Branches”, ASME International Mechanical Engineering Congress and Exposition,
Lake Buena Vista, Florida, USA, November 13-19, 2009.
I. Hassan, S. Kim, C. Zhang, M. Ghorab, T. Elnady, W. Saleh, L. Kadem, T. Lucas; “Investigation of
Novel Cooling Schemes for the Next Generation of Gas Turbine”; IISc Centenary International
Conference and exhibition on Aerospace Engineering ICEAE2009 Indian Institute of Science,
Bangalore, INDIA.
Saleh, W., Bowden, R.C., Hassan, I.G., Kadem, L., “Onset of Gas Entrainment Investigation in Dual
Discharge Oriented branches on a Curved Wall with Stratified Flow - Stereo PIV”, ASME Fluids
Engineering Division Summer Meeting (FEDSM2009) Vail, Colorado, USA, August 2-6, 2009.
Bowden, R.C., Saleh, W., Hassan, I.G., “Experimental Investigation of the Two-phase Phenomena in a
Small Discharge Installed on a Large Pipe with Stratified Gas-Liquid Flow”, ASME Fluids
Engineering Division Summer Meeting (FEDSM2009) Vail, Colorado, USA, August 2-6, 2009.
Saleh, W., Bowden, R.C., Hassan, I.G., Kadem, L., “Onset of Gas Entrainment Investigation in Triple
Discharge Oriented branches on a Curved Wall with Stratified Flow Stereo PIV”, 20th International
Symposium on Transport Phenomena, Victoria, British Columbia, Canada, July 7 – 10, 2009.
Bowden, R.C., Saleh, W., Hassan, I.G., “Modeling Gas Entrainment in Two Discharging Branches
from a Stratified Gas-Liquid Region with Liquid Crossflow”, 20th International Symposium on
Transport Phenomena, Victoria, British Columbia, Canada, July 7 – 10, 2009.
Saleh, W., Bowden, R., Hassan, I., Kadem, L.”Techniques of PIV in Stratified Two-phase Headers”
published in 12th Workshop of Transport Phenomena in Two-phase Flow, Sunny Beach Resort,
Bulgaria, September 13-18, 2008.
Saleh, W., Bowden, R.C., Hassan, I.G., Kadem, L., “Modeling the Onset of Gas Entrainment from a
Stratified Two-Phase Region through Branches on a Curved Surface (Dual Discharge)”, published in
11th International Conference on MULTIPHASE FLOW IN INDUSTRIAL PLANTS Splendid Hotel
"La Torre" Palermo , Italy September, 7-10 2008
Saleh, W., Bowden, R.C., Hassan, I.G., Kadem, L., “Modeling of the onset of gas entrainment from a
stratified two-phase region through two branches on a curved surface”, 6th International Conference on
Nuclear and Particle Physics 17-21 Nov. 2007, Luxor, Egypt NUPPAC' 07
Saleh, W., and Hassan, I.G., “Different modes of gas entrainment through bottom discharge branch by
using three dimensional Particle Image Velocimetry system” Accepted in the “ 5th Joint ASME /
JSME Fluids Engineering Conference” Sheraton San Diego Hotel & Marina San Diego, CA, USA,
July 30- August 2, 2007.
M. Morsy, I. Taha, A. Ibrahim, and W. Saleh "An Autombile Air Conditioning System Powered with
Exhaust Gases"; International Mechanical Eng. Conference Dec. 5-8, 2004, Kuwait IMEC2004-AC003
–CP
