Nantai Products 2015

NANTAI

Jungang Hou(Manger) whatsApp: +86-15864752393 SKYPE: [email protected] 1

TAIAN NANTAI EXPERIMENTAL EQUIPMENT CO.LTD

NANTAI AUTOMOTIVE TECHNOLOGY CO., LTD International Manager: Jun gang Hou (Mr.Hou)

Mobile Phone: +86-15864752393

FAX +86-538-6627679

E-mail: [email protected] (SKYPE)

[email protected] (Gtalk)

[email protected]

Mobile E-mail: [email protected]

[email protected] ([email protected])

QQ: 87982354

WhatsApp/WeChat/Viber: +86-15864752393

Web Site www.nantai-china.com

[email protected]

taian

china

@ho

tmail

.com

NANTAI


Test bench

12PSB (normal Sell Design)

English langauge

Russian language

Old desing for russian language

NT2001/NT2001PLC NT3000 NTS619

english language russian language

[email protected]

taian

china

@ho

tmail

.com

NANTAI


NTS815 Diesel fuel injection test bench is design for customers require. This series test bench adopt high quality frequency

conversing device, and it has characteristic with hi-reliability, ultra-low-noise, energy save, high output torque, perfect auto-protecting function and operate easy. It is the kind of product with high quality and good price in our business.

Used for Bosch in line pumps of K,M,MW,A,B,BV,P(ZU,ZW,ZM) and BOSCH rotative distributor injection pumps EP/VA,EP/VM,VE.F,also used for Chinese pumps such as , , ,K,P7,BQ.etc.

FUNCTION 12PSB NT2001 NT3000 NTS619

NT2001 PLC

NTS815

1,Measurement of each cylinder delivery at any speed 2. Test point and interval angle of oil supply of injection pump. 3. Checking and adjust the mechanical governor. 4. Checking and adjusting the distributor pump. 5..Experiment and adjusting of behavior of supercharging and compensatory device

6. Measurement of oil return of distributing pump 7. Testing of the electromagnetic valve of distributor pump.(12V/24V) 8. Measurement of the internal pressure of distributor pump. 9. Checking of the advance angle of advance device. 10. Checking the sealing of injection pump body 11. Install tube of auto-sucking oil supply can check on oil supply pump(including VE pump)

12.Dgitial controller Control system 13. Computer controller + digital controller 14.Glass tube Oil quantity

measure system 15.Electronic fuel delivery system (flow sensor) 15, LCD touch LCD screen

[email protected]

taian

china

@ho

tmail

.com

NANTAI


screen LCD touch screen optional 16, TRAVEL OF TOOTH BAR optional optional optional optional 17, OIL LUBRICATE optional optional optional optional 18, FORCED COLLING optional optional optional optional

Technical characteristic

Adjustable cylinders numbers

Out power(Kw) RPM Rpm

pre-set Temperature

control system Positive pressure

system Positive pressure

system

12 7.5 11 15 18.5

0-4000

Air supply DC power supply internal

pressure of VE pump

Oil return of VE pump

travel of tooth bar Advanced angle Capability with pump

type

(On request) (On request) All in- line and rotary

pump

Standard accessory Oil lubrication station (12PSB, NT2001, NT2001PLC, NT3000, NTS619, NTS815) Used for test bench without oil lubrication system

[email protected]

taian

china

@ho

tmail

.com

NANTAI


Common Rail Injector Test bench

PQ1000 Common Rail Injector Test Bench

PQ1000(old) PQ1000(new) PQ1000 used to test kinds common rail injector, they adopt digital controller. PQ1000 and PQ2000 have air pump inside,so it need to work with air compressore together to mkae high pressure. Function: 1, it can be used to test Bosch, Delphi, Denso, Siemens injector. 2, check the injector starting pressure 3, check the injector spray quality 4, check the seal of injector. 5, check injection quantity and back oil quantity. 6, check the injector oil flow 7, check the injector pre injection and main injection 8. piezo injector testing(optional)

[email protected]

taian

china

@ho

tmail

.com

NANTAI


CRI2000 Common Rail Injector Test Bench

CRI2000 have CP1 pump inside to make high pressure,so it can work seperately. Function: 1, it can be used to test Bosch, Delphi, Denso, Siemens injector. 2, check the injector starting pressure 3, check the injector spray quality 4, check the seal of injector. 5, check injection quantity and back oil quantity. 6, check the injector oil flow 7, check the injector pre injection and main injection 8. piezo injector testing(optional)

[email protected]

taian

china

@ho

tmail

.com

NANTAI


NTS300/NTS709 Common Rail Injector Test Bench

NTS300 NTS709 NTS300/NTS709 Test bench is our latest indepentent researched special device to test the performance of high-pressure common rail injector, controlled by industrial computer, Windows operating system. The oil quantity is measured by sensor and displayed on computer screen(Electronic fuel delivery system). All data can be searched and saved. It adopts BOSCH(DENSO) original common rail pump to provide 0~1600 bar for rail pressure(DENSO). The rail pressure can be adjusted automatically,and it also provide pressure overload protect. It can test common rail injector of BOSCH, SIEMENS, DELPHI, DENSO. Advanced technology, steady performance, precise measurement and convenient operation. >>>FUNCTION 1.Test injector brandsBOSCH, SIEMENS, DELPHI, DENSO. 2. Test 1 piece of injector. 3. Test the pre-injection of common rail injector. 4. Test the max. oil quantity of common rail injector. 5. Test the cranking oil quantity of common rail injector. 6. Test the back flow oil quantity of common rail injector. 7.Test the average oil quantity of common rail injector. 8. Test the seal performance of common rail injector. 9. Data can be searched and saved.

[email protected]

taian

china

@ho

tmail

.com

NANTAI


EPS200/EPS205 Common Rail Injector Test Bench

NTS200(EPS200) NTS205(EPS205) NTS200(EPS200)/NTS205(EPS205) test bench is our latest indepentent researched special device to test the performance of high-pressure common rail injector, controlled by industrial computer, Windows operating system. The oil quantity is measured by sensor and displayed on computer screen(Electronic fuel delivery system). All data can be searched and saved. It adopts BOSCH original common rail pump to provide 0~2000 bar for rail pressure. The rail pressure can be adjusted automatically, and it also provide pressure overload protect. It can test common rail injector of BOSCH, SIEMENS, DELPHI, DENSO. Advanced technology, steady performance, precise measurement and >>>CHARACTERISTIC 1. Controlled by industrial computer in real time, Windows operating system. 2. Oil quantity is measured by sensor and displayed on 10.4 tactile LCD screen; 3. More than 700 kinds of injecotors data can be searched and used. 4. It is installed BOSCH common rail pump to provide 0~2000 bar 5. Rail pressure can be tested in real time, 6. Provide pressure overload protect 7. Pulse and frequency of the injector can be adjusted. 8. Injection time can be set. 9. Protection function of short-circuit. 10. Precise measurement, easy operation, low noise. 11.Frequency converter inside to keep the RPM. >>>FUNCTION 1.Test injector brandsBOSCH, SIEMENS, DELPHI, DENSO. Piezo injector testing(option function) 2. Test 1 piece of injector. 3. Test the Leakage performance of common rail injector. 4. injection oil quantity and back oil quantity(pre-injection, Idling, emissions, full load) 5. Electronic fuel delivery measuring, automatic testing and detection.

[email protected]

taian

china

@ho

tmail

.com

NANTAI


6. Data can be searched and saved. >>>TECHNICAL PARAMETER 1. output power:1.5KW 2. power voltage:220V 1phase 3. motor speed: 0-3000RPM 4. Oil pressure:0-2000bar 5. flow measure range: 0-600ml/1000times 6. flow measurement accuracy: 0.1ml 7. temperature control range: 40+-2

NTS100(EPS100) Common Rail Injector Test Bench

NTS100(EPS100) common rail injector test bench, pressure controlled automatically, display the frequency and pluse at the screen.It can test common rail injector of BOSCH, SIEMENS, DELPHI, DENSO. Advanced technology, steady performance, precise measurement. Injector testing: leakage, injection oil quantity and back oil quantity(pre-injection,Idling, emissions, full load) Main parameter 1. output power:1.5KW 2. power voltage:220V 1phase 3. motor speed: 0-3000RPM 4. Oil pressure:0-2000bar 5. flow measure range: 0-600ml/1000times 6. flow measurement accuracy: 0.1ml.

CR200A Manual Common Rail Tester

It is used to test bosch,denso,delphi,siemens common rail injector, you need to keep pressing the hand lever to get the pressure.

[email protected]

taian

china

@ho

tmail

.com

NANTAI


Common Rail SystemTest bench

CR3000 common rail system test bench

The function of the tester for CR high pressure pumps is to provide the desired signal to drive the solenoid in the pump being tested. CR3000 common rail Test bench can used for testing following pumps: BOSCH CP1 BOSCH CP2BOSCH CP3 DELPHI SIEMENS, DENSO HP2 AND HP3. It has the functions to test the electromagnetic injectors.( optional: piezo injector testing) It also can test 6 common rail injectors in one time. Design Features l Modulated driving signal to ensure the safety of the solenoid of the CR pump l Adjustable duty cycle for the driving signal l Short circuit protection for the output circuitry of the solenoid driving signal l Measure and LCD display rail pressure

[email protected]

taian

china

@ho

tmail

.com

NANTAI


CR3000A/CR3000A-708 common rail system test bench

CR3000A CR3000A-708 CR3000A/CR3000A-708 COMMON RAIL TEST BENCH is mainly test for common rail pump and injector.

Also it is continuous fuel delivery analysis computerised measuring system for conventional and new diesel injection systems. The electronic fuel delivery measuring system is compulsory for modern diesel injection system testing. It guarantees a high level of reproductivity of the measured valuse. CR3000A COMMON RAIL TEST BENCH is the professional test bench which is used for testing common rail system, can finish the high-pressure common rail system functional testing. >>>System Application: The system is suitable for detection of BOSCH, DENSO, DELPHI and SIEMENS common rail pump and injectors. Such as CP1, CP2.CP3, HP3 series injector pump and the type of Electromagnetic injectors, It also can test 6 common rail injectors in one time. >>> Technical parameters 1, Main motor speed: 0-4000 r / min can be adjustable. 2, Motor power: 7.5KW, 11KW, 15KW, 18.5KW optional. 3, Fuel Injector open voltage Control range: 12V, 80V, 150V Control accuracy: phase adjustment 4, Injector opening frequency Control: 0-1000HZ Control accuracy: 1HZ 5, Fuel Injector Hold Time Control: 0-65535us 6 Delivery Oil CountControl: 0-1000 times Control accuracy: 1 times 7, Fuel pressure control Control: 0-2000bar Control accuracy: 1bar 8, Electronic power: 3 PHASE 380V or 3 PHASE 220V >>>Optional function: 1, Test piezo injector function. 2,Test HP0 pump function. 3, With Bosch DRV VALUE 4,Checking the pump flowing. 5.Forced cooling

[email protected]

taian

china

@ho

tmail

.com

NANTAI


CRS200/CRS300 common rail system test bench

CRS200+NTS815 CRS200 ------------------------------------------------------------------------------------------------------------------------------

CRS300+NT2001 CRS300

System using scope The system is suitable for test all kinds of BOSCH, DENSO, DELPHI common rail system fuel pumps, rail and injector. Such as CP1, CP2, CP3, HP0 etc..series of pump and injector. Using this equipment, it should install on the diesel pump test bench, put the required common rail pumps or injectors installed on the specified location, connect the power to let the machine work, and to test/calibrate it according to the related instructions. Main technical parameters 1. Injection open pressure:

Control scope: 24V, 80V, 150V, Control accuracy: stage regulator 2. Injection open frequency:

Control range: 0-1000HZ Control accuracy: 1HZ

3. Injection open hold time Control range: 0-65535us Control accuracy: 1us

[email protected]

taian

china

@ho

tmail

.com

NANTAI


Common Rail Tester Simulator

Common Rail Tester Simulator Model name For pump or injector Photo

CR2000 common rail system tester

It can test 6 common rail injectors in one Time,and also for common rail pump 1. PUMP-CR2000 , it for test common rail pump 2. EM-CR2000 , it is used to test electromagnetic injector 3. PE-CR2000 it is for test Siemens piezo injector 4. ACCESSORIES (rail, pressure sensor, oil pipe, coupling and so on) BOSCH CP1 BOSCH CP2BOSCH CP3 DELPHI SIEMENS, DENSO HP2 AND HP3. It also can test 6 common rail injectors in one time.

CRP680

Common rail pump tester simulator

BOSCH: CP1CP2CP3 DENSO :HP2, HP3HP4HP0 JIER, DELPHI SIEMENS

CR2000A

common rail system tester simulator

-new English language

Russian language

CR pump: BOSCH CP1,BOSCH CP2,BOSCH CP3, DELPHI, SIEMENS, DENSO HP2 AND HP3. CR injector(6 Cylinder): BOSCH, DENSO ,DELPHI. Pressure control way: CLOSE LOOP or OPEN LOOP

CR1000 common rail injector tester

simulator( 1 cylinder)

---new

BOSCH,DELPHI,DENSO,SIEMENS

And it also can test piezo injector(optional function)

[email protected]

taian

china

@ho

tmail

.com

NANTAI


PQ400-CR2 S60H-CR2

Electronic pump tester Photo Model Function

EDC-VP37 tester

It is used to test the electronic ve pump(VP37 pump)

EDC-Zexel RED4 in line pump tester

It is used to test the Zzexel RED4 in line pump

DENSO ECD V3 V4 V5 tester

It used to test the DENSO ECD V3,V4,V5 pump

[email protected]

taian

china

@ho

tmail

.com

NANTAI


VP44 pump tester

The tester use high-precision, high-power switch, and over-current protection circuit that may occur in the over-current and short circuit protection devices can not damage the self, and prompts the user to fuel injection pump for damage. Control output circuit using high-frequency devices ensure that the output voltage accuracy and synchronization time. equipment also can adjust the mechanical parts of VP44.

[email protected]

taian

china

@ho

tmail

.com

NANTAI


EUP/EUI tester with cam box Now we can provide 23pcs different model adaptor DETROIT EUI--60/50 N2.N3...... CUMMINS EUI--L10 N14....... CATERPILLAR EUI--3196/3176/C10/C12/C15,3406, 3500..... DEPHI E1/E3/..... IVERCO EUI--CURSOR8/10/13.. VOLVO/AUDI/VW /LAND ROVER/JOHN DEAR EUI..... EUP-DDC/MTU/MERCEDES/MACK/RENAULT/DELPHI/DEUTZ.....

The EUP/EUI repair tester consists of a mechanical cam box with specified EUP adapter kits and an electronic controller. The cam box will be installed on a standard high pressure pump test bench. The EUP/EUI being tested will be installed in the cam box with the adapter. The electronic controller provides signal to drive the EUP solenoid synchronous with cam shaft rotation. The EUP fuel outlet is connected through high pressure fuel line to an injector. The EUP fuel injection quantities can be checked at given speeds and loads to judge its quality.

[email protected]

taian

china

@ho

tmail

.com

NANTAI


HEUI test bench

Improve fuel economy & enhance performance Measurement fuel delivery of four HEUI injectors Sealing test for injectors upper seat of the solenoid control valve It can test HEUI(CAT C7/C9CAT 3408...) Main parameter Ourput power:3KW High pressure adjust range0-500bar Low pressure adjust range0-6bar Electronic fuel delivery system,computer display

[email protected]

taian

china

@ho

tmail

.com

NANTAI


PT Cummins Test Bench EPT2000 PT/EUI injector flow test bench

It is special equipment used to provide adjustment of flux test for CUMMINS PT fuel injector. It can simulate the running condition of engine. It has high measure precision, quick sampling speed, extraordinary property, and convenient operation. Fit for: 5/16" and 3/8"PTBPTCPTD and 3/8" overhead PTD fuel injectors flow test adjustment or spurt inclination test. It also can test the flow of all EUI/PT injector and also EUP.

PT212 CUMIMINS PUMP TEST BENCH

PT 212 PT fuel pump Test bench is special equipment used to provide test and calibration for CUMMINS PT fuel pump. It has abundant functions, high measure precision, and fast sampling. For instance: Fit for: PT(G), PT(G)VS, PT(G)MVS, PTGSVS, PTGAFC, PTGAFC-VS, PTR, PTH-VS fuel pumps etc and damping ASA valve. Functions 1.Gear pump pressure and vacuum test 2. Idle speed test 3. Weight assistant pressure test 4. Pressure and flow test in every check point 5. AFC test 6. Oil stopping test 7. Route test of throttle 8. Oil return test of throttle 9. ASA valve test 10. EFC test 11. Shut down valve test

PT411 CUMMINS INJECTOR TEST BENCH

PT411 is special equipment used to provide adjustment of flux test for CUMMINS PT fuel injector. It can simulate the running condition of engine. It has high measure precision, quick sampling speed, extraordinary property, and convenient operation. Fit for: 5/16" and 3/8"PTBPTCPTD and 3/8" overhead PTD fuel injectors flow test adjustment or spurt inclination test. Test Functions 1. Flow test adjustment 2. Spurt inclination test

[email protected]

taian

china

@ho

tmail

.com

NANTAI


PT301 CUMMINS INJECTOR LEAKAGE TESTER

It is special equipment used to provide seal test for PT CUMMINS Fuel injectors. It has quick sampling speed, extraordinary property, and convenient operation. Fit for: 5/16" and 3/8"PTB, PTC, PTD and 3/8" overhead PTD fuel injectors seal test. Functions: 1.. PT fuel injector cylinder block seal 2. PT fuel injector cylinder seal 3. PT fuel injector ball check valve seal

PT101 Top Stop Setting Fixture

Top Stop Setting Fixture-All PT (type D), STC (HVT), and Hyperbar Top Stop Injectors. Measuring fuel injector volume completed, we must test he injector plunger subassembly. (including STC (HVT) and hypervar top stop injectors). This Top Stop Setting Fixture used to the test of the injector. After the leakage testing of the injector is completed, the injector can be assembles to the point where the plunger top stop, or plunger travel setting can be made.

PT800 CUMMINS TOOLS

Fit for: PTGPTGVSPTGMVSPTGSVSPTG AFCPTGAFC-VSPTHVSPTRfuel pumps etc. Fit for: 5/16" and 3/8"PTBPTCPTD and 3/8" overhead PTD fuel injectors etc

[email protected]

taian

china

@ho

tmail

.com

NANTAI


Nozzle tester Model Description Photo

PJ40

It employ the characters of boost speed, high-stability, reasonable structure, flexible operation, fix convenience. PJ-40 Nozzle tester is the ideal instrument calibrating and testing fuel opening pressure, atomization, fuel angle and confined of needle. Main technical characteristic 1. max pressure 40MPa 2. size of outside 320300500 3. net weight 30kg 4.pressure gauge range 0-60Mpa

S60H (BOSCH TYPE)

it Is used to adjust and calibrate the injection nozzle opening pressure and to carry out leakage, spray pattern and chatter characteristic tests. For nozzle size R, S and T. In basic design with 0-40 Mpa (0-400 bar) pressure gauge. In conjunction with a specially ordered pressure gauge, this tester can also be used for testing light crude oil injection valves.

PS400A

1. Initiative injecting press of injector 2. Sound of needle valve vibartion 3. spraying shape 4. Sealing function of needle valve and nozzle body mating pair 5. Sealing function in sreaponse to press.

PQ400 (Double spring injector tester )

Allows to test and to calibrate diesel double springs injectors. Equipment with a manometric gauge for internal pressure regulation Digital display permits to calibrate the injector opening pressure One shot and continuous spraying test rate of oil pressure and air pressure is 50:1

[email protected]

taian

china

@ho

tmail

.com

NANTAI


PQ400S (Double spring injector tester )

Allows to test and to calibrate diesel double springs injectors. Equipment with a manometric gauge for internal pressure regulation Digital display permits to calibrate the injector opening pressure One shot and continuous spraying test rate of oil pressure and air pressure is 50:1

Box- Type Nozzle Tester

Box-Type Nozzle Tester Features: 1. Horizontal structure design,work more solid. 2. Strictly smooth appearance,beautiful facilitate clean. 3. Professional oil pump factory customized,large size plunger, for larger quantity test needs careful dials. 4. Multi-channel installation check, ensure high and low voltage oiling sealing performance. 5. Screw mounting type filter, convenient and clean, easy replacement. 6. Handle pressure light, using comfortable. Box-Type Nozzle Tester Technical Parameters: 1. Pressure range:040MPa(400 bar) 2. Try pressure:35.0MPa(350 bar) 3. Sealing performance:A minute pressure drop is not more than 2Mpa. 4. Oil tank capacity: 4000mL 5. Dimension Size: 320mm350mm230mm 6. Nozzle joint: M12/M12 (filament.)/M14

QCM300 auto electric fuel pump test bench l Auto Electric Fuel pump test bench, it can test the Comprehensive

performance of variety of automotive electric fuel pump assembly. l Such as Voltage, oil flow, oil pressure. l It can be adjusted: l 1. Simulation of oil pressure at various conditions of vehicle fuel

pump. l 2. The simulation of fuel supply at various conditions of vehicle fuel

pump .

[email protected]

taian

china

@ho

tmail

.com

NANTAI


QCM200 Gasoline injector tester and cleaner This product is applicable to diagnose and clean fuel injectors of various cars manufactured worldwide, improving

stability, reliability and reducing pollution. It can perform automatic detecting, analyzing and cleaning. Main functions It can not only diagnose and analyze the performance of the fuel injector, but also inspect dribbling, atomization, injecting angle, distributive value, uniformity coefficient, and their on off cycle, etc of single or multiple fuel injectors. 1. Can do reverse flushing, flush-back cleaning, ultrasonic flushing, and disaffiliation-free flushing to one or more

fuel injectors 2. Automatically simulate the overall process under various pulse width and engine speed. The operation status of the

fuel injectors can also be observed whether at acceleration and deceleration. 3. Can manually set time, pulse width and rotation speed of the fuel injector, and observe the performance under varied

parameters. Ease and convenience of operation. 4. Can determine the shortest on-off cycle and the quality of the injector 5. Can do oil circuit testing, and disaffiliation-free flushing to the engine Technical Parameter l Voltage: AC220V10% 50HZ 500W l Operation Temperature: -10C40 l Tank Capacity: 4L l Test Tube Capacity: 120CC l Ultrasonic Frequency: 40KHZ l Rotation Speed: 010000r/min l Step: 50r/min l Time Counting Range: 010000 sec l Step: 50 sec (adjustable) l Oil Pump Pressure: 1.8kg/cm----10kg/cm l Fuel Flow: 4.5 L/min

[email protected]

taian

china

@ho

tmail

.com

NANTAI


NTC--Diesel Fuel Tank Cleaning Tester

This Diesel Tank Cleaning Machine applies to all kinds of diesel tank. When cleaned by this machine, the diesel tank and the pipe neednt to be dismantled. The diesel oil is exacted by the control pipe and then sent to the coarse strainer (one canister) for primary filter. After that the macroaggregated impurity and water are filtered. Then the gear pump compresses the diesel and sends them to fine strainer (another canister) for further filtering. After going through the double-filtration, the diesel fuel is injected to the corners of the tank at the pressure of 1.5 kilogram, and gets mixed with the rest impurity oil to go into the next cycle of double-filtration system. The diesel fuel is filtered at the speed of 30L/min. After such multiple cycles, the diesel fuel is clean at last.

TEST BED

[email protected]

taian

china

@ho

tmail

.com

NANTAI


.Balance Machine for Turbo

Balance machine(NT-D1)

Balance machine-2(NT-D2)

[email protected]

taian

china

@ho

tmail

.com

NANTAI


NT-D3 Turbocharger Balancing

Taian Nantai Experimental Equipment Co.,ltd introduce the new generation turbo cartridge dynamic balance machine: NT-D3 Turbo Overall full speed balancing machine, through with many years work experience in the files of the turbocharger.

NT-D3 Turbo Overall full speed balancing machine are fulled automated, eliminates the differences due to manual operator. So the testing results are more repeatability and compatibility.

Its bracket and system adopt full new design, to ensure the operating more convenient and reliable. Data reading and control system of the machine are fully digital control, using and processing by the latest

generation industry computer Windows XP operating system. Adopting new software and 15LCD colorful monitor , it not only make all the functions and testing results visible,

and also the operator can direct dialogue with machine. Features: 1) Frequency control, speed 0-100000R/M adjustable( according to the actual needs) 2) Test result are accurate and stable. 3) Free choice of parameters, custom memory recording mode. 4) Complete parts and accessories , to meet the requirements of the vast majority of the turbocharger. 5) Equipped with compact Pneumatic handwheel, for de-emphasis, work easy and efficient. Technical parameters 1) Test Piece work rate:0-100 , 000R/Min adjustable 2) Fan power 7.5KW 3) Hydraulic :0-6bar. 4) Fuel tank: 5 liters (SAE 15/30) 5) Voltage: 380V / 50-60HZ

[email protected]

taian

china

@ho

tmail

.com

NANTAI


Turbo charger

1.IMPORTED VEHICLE : TOYOTA, HITACHI, MITSUBISHI, DEUTZ, CAT. MAN, IVECO, VOLVO, PERKINS, ISUZU, MECEDES--BENZ, KATO, SUMITOMO, KOMATSU, KOBELCO. DAEWOO seriesetc. 2.Gen-set: Cummins K&N series, NT855,K19, K38, L10, HITACHI, CAT, MITSUBISHI, KOBELCO/KATO etc.. 3.DOMESTIC VEHICLE: steyr, Iveco, Hongyan, liberation, dongfeng, xichai, ShangChai, Cummins B.C series etc..

[email protected]

taian

china

@ho

tmail

.com

NANTAI


Scanner Model name Description Picture Remarks

F3-D (Heavy Duty)

. It provides multi-language platform to meet different customers demands. Products with integrated structural design, to achieve 12V, 24V power supply automatical changover. single-track working mode and superlarge touch screen operation, exquisite look and so on, these special designs make you feel cozy and freely. It adopts smooth features drive technology and has good extensibility, which not only satisfies for the modern vehicle ECU communication bus testing, but also the vehicles appearing in the future

ENGLISH RUSSIAN SPANISH

F3-G (world cars +heavy duty)

F3-G is the newest version of multi-functional intelligentized gasoline and heavy duty truck diagnostic scanner universal automotive diagnostic computer. F3-G adopts the advanced modularized design technology which is capable of diagnosing and learning a variety of European, United States, Asian gasoline, truck power system quickly and easily. F3-G is the only auto diagnostic scanner that can test both gasoline and heavy duty trucks in one machine

ENGLISH RUSSIAN SPANISH

[email protected]

taian

china

@ho

tmail

.com

NANTAI


ISO standard injector

Pintle Type Hole Type Low-Inertia Hole Type

Standard injector

Name ISO Standard Bosch Code Diameter(mm) Opening Pre.(Mpa)

ISO7440 A14-17.2 0 681 343 009 17.2+0.3 Pintle Type

ISO7440 A14-14.7 1 688 901 000 14.7+0.3

ISO7440 A44-20.7 1 688 901 015 0.4 20.7+0.3

ISO7440 A54-20.7 1 688 901 016 0.5 20.7+0.3

ISO7440 A64-20.7 1 688 901 017 0.6 20.7+0.3

ISO7440 A74-20.7 1 688 901 018 0.7 20.7+0.3

ISO7440 A84-20.7 1 688 901 019 0.8 20.7+0.3

Hole Type

ISO7440 A64-17.2 1 688 901 020 0.6 17.2+0.3

ISO7440 B64-20.7 1 688 901 101 0.6 20.7+0.3

ISO7440 B64-25.0 1 688 901 102 0.6 25.0+0.3

ISO7440 B74-20.7 1 688 901 103 0.7 20.7+0.3

ISO7440 B74-25.0 1 688 901 104 0.7 25.0+0.3

ISO7440 B84-20.7 1 688 901 105 0.8 20.7+0.3

ISO7440 B84-25.0 1 688 901 106 0.8 25.0+0.3

ISO7440 B54-20.7 1 688 901 109 0.5 20.7+0.3

Low-Inertia Hole Type

ISO7440 B54-25.0 1 688 901 110 0.5 25.0+0.3

[email protected]

taian

china

@ho

tmail

.com

NANTAI


1. Common Rail Tools

NO.1060 Full common rail tools (N0.1060-1 CR injector support ,NO.1060-2: 35pcs CR tools)

NO.1061 Simple cr tools (20PCs)

NO.1062A cr injectors adaptor (12pcs) NO.1062B injector adaptor(12pcs) Short clamp

NO.1062C injector adaptor(5pcs) Short clamp

7mm 9mm NO.1063A NO.1063B

NO.1072 DENSO 7050 injector adaptor1 pcs)

No. 1063 rapid connector NO.1064 Common rail oil pump assembly and disassembly tools

[email protected]

taian

china

@ho

tmail

.com

NANTAI


NO. 1065 Common rail Injector demolition Truck tools

NO. 1066 CR-A Rail Pressure Tester NO. 1067 Meter Holder

NO. 1068A Grinding tools for Valve assembly ( with high speed drill

bench)

NO. 1068B Grinding tools for Valve assembly

NO. 1069 Valve assembly Leakage test tools

NO. 1070 Pump Rotational Tools For CP1, CP3 pumps

NO.1071PUMP ROTATIOAL TOOLS ( FOR CP2 U2 pumps)

NO. 1073 Electron MICROSCOPE

[email protected]

taian

china

@ho

tmail

.com

NANTAI


NO. 1074 Valve assembly test tools(0.001mm)

NO. 1075 SHIMS MEASURING TOOLS Micrometer 0.001mm

NO.1076 dismouting tools for filter of common rail injector

NO. 1077 H10 BACKFLOW KIT For Denso Injectors

NO. 1078 H20 Backflow Kits ( for Caterpillar Kit)

No,1079 Multi-functional adaptors

No,1080 Multi-functional adaptors No,1081 Multi-functional adaptors No,1082 Bosch fuel collector

[email protected]

taian

china

@ho

tmail

.com

NANTAI


NO,1083A puller for BOSCH pump valve

NO.1083B puller for DELPHI pump valve NO1084Portable fuel injector flow tool

NO1085 VALVE ASSEMBLY TEST TOOLS

NO.1086 HP0 pump plunger repair tool NO,1087 Cylinder Pressure Meter For Diesel Truck

NO.1060A vice type stand for injector assembling.

NO.1091 injector dismounting stand NO.1092 measuring tools of shims

[email protected]

taian

china

@ho

tmail

.com

NANTAI


2.Tools for EUI/EUP

NO.1088 dismounting tools for cummis EUI(N14,L10) N0.1090 dismounting tools for CAT HEUI injector (C7,C9,3126 HEUI)

NO.1089 dismouting tools for volvo EUI (VOLVO 20430583,20440388/20500620)

NO.1093 EUI dismouting stand

NO.1094 nozzle adaptor(EUI/EUP/HEUI)

[email protected]

taian

china

@ho

tmail

.com

NANTAI


3. Common Rail Spare Parts

NO.1990 bosch injector repair kits(3pcs) NO.1991 bosch injector repair kits(7pcs) NO.1992 bosch injector ball( 6 cylinder )

NO.1993 bosch injector ball( 4 cylinder) NO.1994 DELPHI 621C valve NO.1995 DELPHI 622B valve

NO.1996 DELPHI 625C valve No,1997 FEED PUMP VE PARTS No,1998 Denso valve

[email protected]

taian

china

@ho

tmail

.com

NANTAI


5. High-precision adjustment Gasket B11 19/S22 BOSCH

0.900-1.500 0.01mm/Type

61Types

Total:610pcs

0445-120-002/008/007/018/032/103/113/114/208/210/043/089/019/

020/029/059/120/123/125/2310986-435-501/503/505/508/502/523

.

B12 18/S22 BOHCH

0.900-1.500 0.01mm/Type

61Types

Total:610pcs

0445-120-002/008/007/018/032/103/113/114/208/210/

043/089/019/020/029/059/120/123/125/2310986-435-501/ 503/505

/508/502/523..

B13 2.3/ 4.2 BOSCH

1.200-1.960 0.02mm/Type

39Types

Total:390pcs

0445-120-002/007/008/018/032/103/113/114/208/210

/027/042/082/050/078/081/086/110/170/184/185/224/019/020/029/

120/123/125/231/0590986-435-501/503/505/508/502/504/520/521/

518/523

B14 3.4/ 5.5 BOSCH

1.200-1.860 0.02mm/Type

34Types

Total:340pcs

0445-120-002/007/008/018/032/103/113/114/208/210/043/089/027/

042/082/050/078/081/086/110/170/184/185/224/019/020/029/059/1

20/123/125/2310445-110-068/119/070/105/106/107/108/181/190

/266/083/183/231/291/002

B15 BOSCH

8.300-8.700 0.01mm/Type

41Types

Total:410pcs

0445110002/068/070

0445120018/032/103/113/114/019/020/008

0986 435 502

B16 2.28 BOSCH

0.910-1.400 0.01mm/Type

50Types

Total:500pcs

0445110105/106/107/108/181/190/266/119/083/183/231/291/078/1

020445120027/042/082/059/123/231/029/125/050/078/081/086/

110/170/184/185/224/208/210

0986435504/520/521/022/518/

B17 2.3/ 4 BOSCH

1.200-1.900 0.02mm/Type

36Types

Total:360pcs

0445 120 043/089

B21 3.5/ 6.8 DENSO

1.000-2.500 0.05mm/Type

31Types

Total:310pcs

095000 5212/5226/5471/5511/6353/6593/6700/

6791/8100/0570/0750/0145/0562/0761/0801/1211

6140 07L 0127 9709500-890..

B22 4.8/ 7.7 BOSCH

0.980-1.440 0.02mm/Type

24Types

Total:240pcs

0445120027/042/082/050/078/081/086/110/170/184/185/224/ 09

86 435 504/520/521/518..

B23 3.15/ 5.75 DENSO

1.000-2.500 0.05mm/Type

31Types

Total:310pcs

095000-5600/5650(16600 EB300/16600 BN821)/5801/7030

[email protected]

taian

china

@ho

tmail

.com

NANTAI


B24 1.7/ 3.95 DENSO

1.000-1.500 0.02mm/Type

26Types

Total:260pcs

0950005212/5226/5471/5511/6353/6593/6700/6791/8100/5600/56

50(16600 EB300/16600 BN821)/5801/7030 6140 07L 0127 97095

00--890

B25 19/ 23.5 BOSCH

0.900-1.120 0.01mm/Type

23Types

Total:230pcs

0445110002/068/119/070/105/106/107/108/181/190/266/083/183/2

31/291

0986435001/083/022/078/102/045/047/053/055/158..

B26 19.5/ 23 BOSCH

1.340-1.760 0.01mm/Type

44Types

Total:440pcs

0445120027/042/082/050/078/081/086/110/170/184/185/224/..

0986 435 504/520/521/518

B27 21.5/ 24.3 DENSO

1.500-1.720 0.01mm/Type

23Types

Total:230pcs

095000 5212/5226/5471/5511/6353/6593/6700/

6791/8100/5600/5650(16600 EB300/16600 BN821)/5801/7030 61

40 07L 0127 9709500--890

B31 10.5/ 15.7 DENSO

1.200-1.300 0.01mm/Type

11Types

Total:110pcs

0445 110 002/068/119/266..

0986 435 001/083/022..

B37 2.7 BOSCH

1.155-1.265 0.01mm/Type

12Types

Total:120pcs

0445110083/183/291..

B40 25/ 4.5 BOSCH

1.440-1.660 0.02mm/Type

12 types

Total 120pcs

Used for bosch

B41 2.5/ 6.4 BOSCH

1.110-1.200 0.01mm/Type

10 types

Total 100pcs

Used for bosch

B42 3/ 5.1 BOSCH

1.340-1.660 0.02mm/Type

17 Types

Total 170pcs

Used for bosch

B45 22.4/ 25 DENSO

3.900-4.130 0.01mm/Type

24 types

Total 240pcs

09000-0145/0562/0761/0801/1211

(1) Universal Shims : ( Modle: NT-TD05):USD300 B11/B12/B13/B14/B16/B22/B25/B26/B27/B31 Every kind has 10 level, Each level has 5pcs.Total:500pcs (2) Full Range Of Shims( Model : NT-TQ10):USD530

[email protected]

taian

china

@ho

tmail

.com

NANTAI


B11/B12/B13/B14/B16/B22/B25/B26/B27/B31 Every kind has 10 level, Each level has 10pcs.Total:1000pcs (3)Bosch Set Shims (Model: NT-TB07):USD380 B13/B14/B16/B22/B25/B26/B31 Every kind has 10 level, Each level has 10pcs.Total:700pcs (4)Denso Set Shims (Model: NT-TD04):USD250 B21/B23/B24/B27 Every kind has 10 level, Each level has 10pcs.Total:400pcs (5) Whole series kits(A) As above every kind 5pcs x 101 series =505PCS: USD140 (6) Whole series kits(B) As above every kind 10pcs x 334 series =3340PCS:USD930

whole series kits(A) whole series kits(B)

4.BOSCH injector valve(Original Bosch or Copy)

china copy

[email protected]

taian

china

@ho

tmail

.com

NANTAI


BOSCH ORIGINAL BOSCH Serial Sample Model Length BOSCH Serial Sample Model Length

1 692 FOOR J01 692 104.97 1 130 FOOR J02 130 73.37

2 657 FOOR J01 657 104.41 2 941 FOOR J01 941 85.9

3 727 FOOR J01 727 102.17 3 339 FOOR J00 339 66.04

4 035 FOOR J02 035 4 399 FOOR J00 399 114.71

5 451 FOOR J01 451 91.72

5 0005 FOOR J00 005 64.69

6 056 FOOR J02 056 113 1005 FOOR J01 005

806 FOOR J02 806 6

003 FOOV CO1 003 64.7

7 704 FOOR J01 704

88.17 7 2005 FOOR J02 005 58.85

472 FOOR J02 472 8 375 FOOR J00 375 106 8

278 FOOR J01 278 75.21

9 420 FOOR J00 420 113.17

9 479 FOOR J01 479 95.44 10 067 FOOR J02 067 91.23

218 FOOR J01 218 11 222 FOOR J01 222 89.54

175 FOOR J02 175 12 213 FOOR J02 213 99.87 10

466 FOOR J02 466

99.67

13 334 F00R J01 334 115.14

11 159 FOOR J01 159 103.22 454 FOOR J02 454

12 924 FOOR J01 924 110.3 14

834 FOOR J00 834 99.04

692

15 015 FOOV CO1 015 94.3

1 044 FOOV C01 044 121.2 16 428 FOOR J01 428 103.1

2 033 FOOV C01 033 127.89 17 052 FOO V C01052 120.6

3 023 FOOV C01 023 90.42

130

4 022 FOOV C01 022 105.72 1 359 FOOV CO1 359 84.77

2 358 FOOV CO1 358 107

033

3 363 FOOV CO1 363 120.37

329 FOOR J01 329 4 371 FOOV CO1 371 88.74 747 1 747 FOOR J01 747

103.3

359

5 383 FOOV CO1 383 127.77

[email protected]

taian

china

@ho

tmail

.com

NANTAI


714 FOOR J01 714 6 346 FOOV CO1 346 125.02 2

004 FOOR J02 004 75.2

7 365 FOOV CO1 365 71.57

3 819 FOOR J01 819 109 8 338 FOOV CO1 338 120.37

4 012 FOOR J01 012 9 334 FOOV CO1 334 106.24

10 367 FOOV CO1 367 113.46

051 F00V C01 051 11 368 FOOV CO1 368 103.65 1

054 F00V C01 054 111.44

2 045 F00V C01 045 110.62 051

3 001 F00V C01 001 103.3

6. Other model(Original parts)

Bosch original injector DENSO original injector DELPHI injector

Bosch common rail pump DNESO common rail pump CAT injector

[email protected]

taian

china

@ho

tmail

.com

NANTAI


Ultrasonic cleaner

Digital Timer and Heater Mechanical Timer and Heater Digital Timer and Heater

(Adjustable power)

Stainless steel Ultrasonic Cleaner parameter table Mechanical AR-08 AR10 AR20 AR30 AR40 AR60 AR80 AR100

Digital AR08A AR10A AR20A AR30A AR40A AR60A AR80A AR100A

Ultrasonic power

70W 70W 120W 180W 240W 360W 480W 600W

Heating power 70W 70W 120W 180W 240W 360W 480W 600W

Tank capacity(L)

1.3L 2.0L 3.2L 6.5L 10L 15 22L 30L

N.W.(KG) 2.0 2.5 3.5 5.0 5.0 10 13 16

Digital 1-30 min. adjustable, mechanical control knob, timing control Timer control Mechanical 1-30 min. adjustable, digital LCD display, microcomputer control buttons

Digital 20-80 adjustable, mechanical control knob Temp Control Mechanical 20-80 adjustable,digital LCD display, microcomputer control buttons

Vibrator BLT (BOLTED LANGEVIN TRANSDUCER) Ultrasonic frequency

40kHz

Power supply AC100V~120V,50/60Hz; AC220~240V,50/60Hz Material SUS304 stainless steel tank basket Optional

[email protected]

taian

china

@ho

tmail

.com

NANTAI


Tools for different Pumps Such as PQ400 Double springs Nozzle tester, PS400A NOZZLE TESTER ,Tools for PW pumps , ABZ PUMPS, VE PUMPS , P TYPE PUMPS P7100 P3000 ,TOOTHED BAR GAGUE PRE-TRAVEL GAGUEMULTI-FUNCTIONS ROTATIONAL TOOLS etc same as the pictures in our website: www.nantai-china.com

NO.901 (I,II,III) General Tool NO.902 P type pump Tools NO.903 VE pump Tool

NO.904 Tooth bar Travel Tester

NO.905Tooth bar travel rulers

NO.906 Pre-Travel Gauge

NO.907 VE pump Piston Journey

tester and VE pump Pressure tester

NO.908PN, Pw, PB Tool

NO.909 P7 pump Tool

NO.910 Cummins LAMA NO.911 MW Maintainer NO.912 P8500 Maintainer(6)

[email protected]

taian

china

@ho

tmail

.com

NANTAI


Tools(3pcs) M12X1.5

NO.913For Imported Pump

Maintainer(6) M12X1

NO.914 For Imported Pump(6)

M12X1

NO.915 BOSCH P3000 or HENGYANGP7100(6)

M10X1

NO.916 LONG PUMP P7100(6)

M10X1 NO.917 MORE USED ON

LONG PUMP(6) M10X1

NO.918 CHONGYOU PUMP(6) M12X1.5

NO.919 MORE USED LONG

PUMP(6) M14X1.5

NO.920 WEIFU P2000(6) 11.7

NO.921 P TYPE PUMP(6) 10.3

NO.922 P TYPE PUMP(6)

12.3 NO.923

P7100,PW2000,BEIYOU PUMP(6) 11.7

NO.924 BOSCH P8000(6) 11.7

[email protected]

taian

china

@ho

tmail

.com

NANTAI


NO.925 CHONGYOU PUMP(6)

M12X1.5 NO.926 P TYPE PUMP(6)

11.5 NO.927 CHONGYOU PUMP, IT

INSTEAD OF NO.918(6) 10.3

NO.928 LONG PUMP, IT INSTEAD

OF NO.919(6) 12.3

NO.929 BOSCH PUMP Maintainer (6PCS/SET)

NO.930 KINDS OF A TYPE PUMP(6PCS/SET)

NO.931 ZEXEL Maintainer NO.932 PE Pump Depressor

NO.933 VE Pump Elements

NO.934 AO VEI Tool

NO.935 Disassemble Benz

Pump tools NO.936 Five-flowers Wrench

[email protected]

taian

china

@ho

tmail

.com

NANTAI


NO.937. Disassemble P9 pump

Tool NO.938 Disassemble

Flyweight Tool

NO.939 Tear-Open Advance Device Screw

NO.940 Fuel Injection Rotating

Tools NO.941 6112, 4112 LAMA

NO.942Slide bars for disassemble injectors

NO.943Caterpillar -Tool

NO.944STEYR SLEEVE

NO.945 Small Stopper

NO.946 JETTA TOOL ( Three

Wrench) NO.947 Pump Scratcher NO.948 Tear open

P3000.P2000 P7100 Bearing Scratcher

[email protected]

taian

china

@ho

tmail

.com

NANTAI


NO.949 P type pump Clip Tool

NO950:Caterpillar-Tool

Injection Tool

NO.951:Caterpillar-Tool

NO.952: Caterpillar-Tool NO.953 5M pump Socket

Tools NO.954: 5M pump Tool

NO.955: 6110 Tear-Tool Gear Tool NO956: Caterpillar Flange

No957: PLUNGER CLIP

No958 :P-type plunger retainer clamp

NO.959 for dismounting of different type injector

NO.960 P7100,P2000 multifunction support

[email protected]

taian

china

@ho

tmail

.com

NANTAI


Company profile Taian Nantai Experimental Equipment Co., Ltd., located in Tianyuan Street Economic Development Zone Taian

City Shandong Province P.R. China, is the leading manufacturer specializing in producing the Diesel Fuel Injection

System Tester in China, is available for Traditional diesel fuel injection pump test bench, PT-CUMMINS pump and

injectors Test stand, EDC( Electronic Diesel Controler), CR( Common Rail pump Tester) , CRI(Common Rail Injectors

Tester), Nozzle Tester,and many spare parts of Pumps.

The Diesel fuel injection pump adopts the variable-frequency and variable-speed technique, which is divided into

four series-12PSB series, NT2000 series, NT2001 series and NT3000 series, and there are over thirty kinds of test

stands with a complete type and size, which can meet all kinds of users' demands to equipment. Its production process

is advanced. Its technique has ranked the International leading level.

The company's research and development capabilities are rich and the test measure is complete, and reward the

ISO9001-2000 CERTIFICATE and CE certificate. Taian Nantai Experimental Equipment Co., Ltd. has a strict internal

management and has established a complete and reliable quality assurance system. The company's product sale

network has spread all over the country. The after-sales service of product has a system of its own, which can provide

the best service for users timely. The company's aim is "honest and trustworthy operation and brazing new trails in

science and technology".

[email protected]

taian

china

@ho

tmail

.com

Documents

Nantai Products 2015