Embed Size (px)
Citation preview
Non
Des
truc
tive
Tes
ting & Corrosion Equipment
Tektraco Ltd. together with its Principals, specialises in providing a broad spectrum of inspection and test equipment for inspection companies, process plants, manufacturing and service industries.
Tektraco’s main offices are in Malta, with branch office in T .ripoli
.
We are pleased to provide this copy of Non Destructive Testing & Corrosion Equipment. For more details on the equipment presented in this catalogue please contact us.
We offer to our clients:• Technical Support and Advice.• Extensive Product Range.• Personal Attention to Specific Customer Needs.
Should you not see the product you are looking for or require more detailed information on a particular product please do not hesitate to contact us.
WELCOME TO TEKTRACO
NDT CATALOGUE
TEKTRACO your reliable partner!2
www.tektraco.com
INDEX
Elcometer Inspection Equipment 4
PMI Analysers
Colenta NDT Processors & Accesories
PROCEQ Hardness Testing
12
19
21
3
Magnaflux 8
For a full range of Elcometer equipment please refer to the Elcometer catalogue.
Should you require a free copy kindly contact us on [email protected].
3 4
Concrete Testing
Paint Inspection
Blasting Equipment
TEKTRACO your reliable partner!4
From the preparation of the surface to be coated, through climatic condition monitoring to the dry film thickness evaluation, visual assessment and gauge-based testing will ensure adequate process control.
For steel surface preparation, Elcometer offer a range of visual standards for rust removal and a simple test for dust on blast-cleaned surfaces. A range of salt contamination methods are available as well.
For climatic condition monitoring Elcometer offer simple bi-metallic magnetic thermometers and electronic thermometers for temperature measurement, with wet and dry bulb hygrometers and electronic dewpoint meters for the measurement and data-logging of relative humidity and dewpoint temperatures.
For coating thickness Elcometer offer wet film combs, mechanical and electronic non-destructive dry film thickness gauges, the destructive paint inspection gauge and the non-contact powder coating thickness gauge.
For post coating assessment of adhesion and porosity of the coating there is a full range of adhesion testers and low and high voltage holiday detectors.
www.tektraco.com 5
COATING INSPECTION
NDT INSPECTION
With their ergonomic sealed metal cases, water and dustproof membrane keypads and a wide range of ultrasonic
transducer probes, capable of measuring materials at temperatures up to 482°C (900°F), the Elcometer NDT
material thickness, precision thickness and flaw detection gauges are the ideal ultrasonic instruments for
measuring material thickness, sound velocity and detecting a wide range of flaws in a broad range of industry
applications, including the oil & gas, marine, transport, power and civil engineering sectors.
6 TEKTRACO your reliable partner!
CATEGORIES:
CONCRETE INSPECTION
Concrete structures are normally constructed using steel reinforcement and Elcometer offers Concrete Covermeters and Rebar Locators to either measure the depth of concrete over the rebar or simply to detect the rebar under the surface. Half-cell versions of the Covermeter can be used to assess the probability that corrosion is taking place on the rebar. Test Hammers are used to assess the surface hardness of cured concrete and Elcometer offers several moisture meters that can be used to determine if the structure is sufficiently dry for coating.Adhesion testers for coating on concrete are available using ither hand-operated mechanical methods or the automatic hydraulic method.
Elcometers blast equipment are engineered to be incredibly durable, safe and reliable, available in arange of sizes with a working pressure of either 12 or 15 barExplore the Elcometer Product Ranges with our latest Catalogue. Download from https://elcometer.com/en/request-a-catalogue.html
www.tektraco.com 7
Tekraco is the official agent of Magnaflux for Malta & Libya.
TEKTRACO your reliable partner!8
Magnetic Particle Inspection/Magnetic Particle TestingThe first Magnaflux inspection systems appeared in 1929, since then we have grown into the global leader for magnetic particles. Our customers rely on Magnaflux magnetic particle testing solutions to set the global standard for fluorescent and non-fluorescent testing of surface and sub-surface defects in ferromagnetic parts.
Fluorescent Magnetic ParticlesOur fluorescent MPI products are perfect for high-sensitivity, wet method magnetic particle inspection. They produce bright yellow/green indications when viewed under UV(A) light.
Powders14A
MG 410
MG 601601.1
Liquid Concentrates WB-12 622.1MF-655 WB
eu.magnaflux.com
Contrast PaintsUse our rapid-drying white contrast paints wherever you need a better contrast between your test surface and the magnetic particles. The paint will produce an opaque white background, making it easy to see even the smallest indication
WCP-2104A104plus695.1
CleanersUse our solvent-based cleaners for general cleaning of your components, both before and after testing, to remove penetrant, oil, grease and other contaminants.
SKC-SC5C10RL-40
Water Bath AdditivesWA-1 disperses rapidly in water baths, aiding the suspension of magnetic particles and ensuring that the resulting ink gives good surface wetting of the test part.
WA-2 eliminates foaming in water-based baths.
Oil-based CarrierMG/MX Carrier II OIl is an oil-based carrier fluid used for the suspension of wet method magnetic particles. It contains special
Visible Magnetic ParticlesOur visible magnetic particles are finely controlled to produce vivid indications that are easy to see without special lighting.
Dry Method Powders1 Grey8A Red
Ready-to-use Inks7HF 103690.2
Water-based ConcentrateWB-27
additives to minimise background fluorescence when using fluorescent materials.
www.tektraco.com 9
eu.magnaflux.com
Equipment and Accessories
Whether you are testing a small bolt, a large turbine rotor or anything inbetween, we can supply a wide range of high-quality magnetic particle inspection equipment for any application.
Manufactured to meet government and industry specifications, our MPI equipment gives you:
Simple, fast and reliable operation.Versatility to locate both surface and near-surface defects.Economical operation for high-volume inspection.Built-in durability for tough industrial environments.Virtually no limitations on the size of part that can betested.
•••••
Test Bench UnitsFerrof luxMAG 20MAG 40MAG 50 and 50/FR Universal SW series Universal WE
Mobile Test UnitsChain InspectionFerrotestIsotestMAG 50/3HM, 50/5HMP920
Demagnetisation UnitsETT SeriesETW SeriesETB SeriesSB SeriesS-66 and S-1212
Magnetic YokesTWM 42 NTWM 220 NY1Y6Y7Y8YM5
TEKTRACO your reliable partner!10
Liquid Penetrant Inspection/Penetrant TestingMagnaflux penetrant inspection products are the most widely used LPI/PT inspection products and best known for reliability on the market. No matter what the industry, Magnaflux customers trust our penetrant products to provide superior results in detection of fine defects and cracks in ferrous and non-ferrous materials.
Fluorescent PenetrantsMade from high-quality fluorescing dyes and solvents, our fluorescent liquid penetrants have outstanding penetrating characteristics and will give superior indications of the smallest crack or flaw.
Water-Washable Fluorescent PenetrantsZL-15B Level ½ZL-19 Level 1
Visible PenetrantsOur visible colour-contrast penetrants have outstanding penetrating characteristics, producing vivid red indications of faults which can easily be seen with the naked eye.
Water-Washable Visible PenetrantSKL-WP2
Solvent-Removable Visible PenetrantsSKL-SP2RP20PWL-1
Low-Temperature Visible PenetrantRP20LT
ZL-60C Level 2ZL-60D Level 2ZL-67B Level 3ZL-56 Level 4
Post-Emulsif iable Fluorescent Penetrants ZL-2C Level 2ZL-27A Level 3ZL-37 Level
DevelopersOur developers are designed to enhance your LPI testing in two ways: they maximise the sensitivity of whatever penetrant you are using, and they provide a white contrasting background on the test surface, making it easy to see any flaw indications.
Dry PowderZP-4B
Solvent-based SKD-S2D30AD30plusDL-20
Aqueous (Water-based) ZP-5B
Water-soluble ZP-14A
Cleaners/RemoversUse our solvent-based cleaners for general cleaning of your components, both before and after testing, to remove penetrant, oil, grease and other contaminants.
SKC-SC5C10RL-40
EmulsifiersZE-4B is a fast-acting lipophilic emulsifier with a high flash point and low volatility. It is biodegradable and safe to use on all aerospace alloys, including aluminium, steel, nickel and titanium.
ZR-10C is a biodegradable remover concentrate used as the remover/emulsifier in post-removable penetrant systems.
eu.magnaflux.com
www.tektraco.com 11
PMI analysers for inspection
BECAUSE YOU ONLY GET ONE CHANCE TO GET IT RIGHT.
TEKTRACO your reliable partner!12
When compromise isn’t an optionWhether you need a handheld or a mobile analyser, you need to be sure that you get accurate results fast. If you need a compliance solution or want to add effi ciency to your processes, Hitachi High-Tech’s analysers can meet your needs.
Our range of PMI analysers and technologies can be used for:
ǀ Rapid, reliable material identifi cation – even in the most demanding conditions.
ǀ Meeting standards and avoiding product recalls, lawsuits and loss of reputation.
ǀ Assessing critical process components before and after installation – avoiding delays, extra costs and reworks.
ǀ Keeping sites safe and compliant.
ǀ Powerful data management and reporting.
Superior alloy analysis, whatever the operationWhen getting it right is safety critical - you need an analyser that quickly and accurately delivers results. Hitachi High-Tech’s PMI analysers give you precise and reliable analysis on the go. Even in the most demanding of environments.With over 45 years experience in supplying innovative analysis solutions to companies across the world, we know the importance of fast and accurate analysis to our customers. Hitachi High-Tech’s range of analysers off er easy to use, proven and comprehensive solutions that can be used to comply with regulations and even enhance productivity, safety and effi ciency.
Inspection doesn’t have to be costly or time-consuming. With fast start up times and cloud-based data management, companies across a range of industries can generate, store and share data in real-time across their organisation, for total compliance with total confi dence.
13www.tektraco.com
The Hitachi High-Tech PMI analyser technologies: at a glance
XRF (X-RAY FLUORESCENCE)
Handheld XRF can be used for measuring a wide range of elements and concentrations in many diff erent materials, including metal alloys. Using an X-ray tube to induce a response from the atoms inthe tested sample, XRF is totally non-destructiveleaving no mark on the measured surface. It’s idealwhen you need low limits of detection for accurategrade separation and chemistry.
OES (OPTICAL EMISSION SPECTROSCOPY)
OES is the only measurement technique that can reliably separate the stainless steel L-grades (L-grade separation e.g. for 316 and 304 grades), and provide highly accurate chemical composition to calculate the carbon equivalent. Beside the precise determination of all main and auxiliary elements, OES is the only method outside a lab to measure phosphorous and carbon to 30 ppm, sulphur to 20ppm and boron down to 5 ppm with high level of confi dence. OES is the only technology that can accurately measure the nitrogen content in duplex and austenitic stainless steels.
LIBS (LASER INDUCED BREAKDOWN SPECTROSCOPY)
API 578 has included portable LIBS as a technology for PMI besides OES and handheld XRF. LIBS is a fast, easy to use handheld format, ideal for the identifi cation of diff erent types of alloys. There are no X-rays as it uses a focused laser pulse to hit the sample surface, removing only a very small amount of material for analysis leaving hardly visible burn mark on the measured surface.
The largest metals GRADE Database Pre-installed on all Hitachi High-Tech optical emission spectrometers, and available for other products, is an extensive metals database for fast and easy grade identifi cation. More than 12 million records for over 340,000 materials from 69 countries and standards are included.
For users, this means no more time-consuming research in norms and grade catalogues. In just a few easy steps you can search for metals, worldwide, by specifi c chemical composition or mechanical properties. You can decipher metal specifi cations and fi nd the correct grade for a specifi c application. Plus, you can more easily follow the ever-increasing pace of changes to national and international standards, such as AISI/ASDM, DIN, EN, BS, JIS, GOST and many more.
14 TEKTRACO your reliable partner!
Hitachi High-Tech PMI inspection products: at a glance X-MET8000It’s great for the analysis of light elements (Mg to S) for tight control of components and systems.
The X-MET8000 is capable of measuring hot surfaces up to 400°C/752°F so it can be used to measure components in running processes without the need to shut down and wait for the surfaces to cool. An optional small-spot collimator (3mm diameter) can be used to isolate specific features (e.g. welds) from surrounding materials and measure them accurately.
PMI-MASTER SMART AND PRO2These robust OES analysers deliver analysis of key elements, with fast start up times. By significantly minimising the amount of downtime involved in inspection, operators get increased efficiency as well as pinpoint accuracy.
The PMI-MASTER Smart is the only truly portable high performance OES analyser on the market. It’s been optimised for use in tough environments with temperature monitoring that protects against overheating.
The PMI-MASTER Pro2 has a powerful battery that allows 750 measurements for eight hours of remote operation. Truly mobile, the Pro2 is capable of analysing almost any sample, even those with complex shapes and irregular geometries.
VULCANOne of the fastest handheld metals analysers in the world, the Vulcan allows you to identify a wide range of alloys including stainless steels, low alloy steels, nickel and aluminium alloys (and more) in a single second. Great for light elements like Be, Mg, Al and Si.
Vulcan is also extremely rugged and can withstand even the harshest operating conditions. Laser analysers typically require significantly less hassle with licenses and approvals.
www.tektraco.com 15
Perfect for your business
Simple Our analysers are simple and easy to use.
Durable Our analysers have to work where you do, wherever that is – so our designs are tough and durable.
Latest data management Share results on the spot and store them securely to one safe centralised location.
Affordable Our analysers feature reliable, rigorously-tested and efficient technology – to ensure that over time, your overall costs are lower.
Accurate For the analysis of important elements like carbon, nitrogen, sulphur, phosphorous and boron to grade ID and elemental composition.
Efficient Minimise downtime and disruption with the fast start up times.
Reliable Hitachi High-Tech put accuracy first – we know it’s vital to be 100% sure.
16 TEKTRACO your reliable partner!
Our ServiceOur global network of service hubs provides complete technical support to keep you up and running:
Telephone help desks for a fast response to any problem.
In-depth support over the internet with online diagnostics.
Rental instruments, so you can keep working if your analyser isn’t.
Annual calibration checks and re-certification services to ensure your analyser produces the right results year on year.
Training to help you get the most from your analyser and its features.
Extended warranties for peace of mind and avoiding unplanned costs.
A range of consumables and accessories – from spare batteries to benchtop sample preparation.
A fast and efficient repair service.
17www.tektraco.com
Why us?Hitachi High-Tech has been providing specialist analysis solutions to companies from a range of sectors for over 45 years. Our team of in-house experts help our clients achieve the best results through matching companies to the right analysis solution, no matter how complex the application or working environment.
What next?If you want to talk to a member of our team about our range of PMI analysers and how they can fi t into your operations, or to arrange a demo, get in touch today at [email protected]
MORE INFORMATIONFor more information about our PMI products, visit: hhtas.net/inspection
CERTCERT 3397.01
This publication is the copyright of Hitachi High-Tech Analytical Science Ltd and provides outline information only, which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or regarded as the representation relating to the products or services concerned. Hitachi High-Tech Analytical Science Ltd’s policy is one of continued improvement. The company reserves the right to alter, without notice the specifi cation, design or conditions of supply of any product or service.
Hitachi High-Tech Analytical Science Ltd acknowledges all trademarks and registrations.
© Hitachi High-Tech Analytical Science, 2018. All rights reserved.
TEKTRACO your reliable partner!18
NDT processorsCOLENTA 37 NDT dryerFor Drying manually processed film. Film is passed through a wetting agent (with auto top-up) before entering a warm air dryer, with variable speed control and 2 dryer heat options. These two features combine to provide good drying results and allow the dryer to perform well in the many varied environmental conditions around the world.Film sizes to be used: - max. width 35 cm
- min. width 10 cm- min. length 10 cmDrying capacity:- min. 15 cm/min (320 sec) dry to dry / - max. 45 cm/min (108 sec) dry to dry
COLENTA INDX900EThis is a conventional table top darkroom processor with a production speed of 13 cm/min. at a standard processing cycle of 8 minutes. It is a fully automatic „dry to dry“ system in a modern design with small dimensions and a light weight, ideally suited for customers wanting a fully automatic processor for low capacity and varied production needs at an affordable price that provides a consistent high quality processed film withtotally reliability .
COLENTA INDX 43 2.0bis the best NDT medium capacity processor in the market when considering price and production specifications, providing the highest level of quality and reliability with the flexibility required by the medium and higher volume users. Very competitive against the GE models offering a maximum processing width of 43 cm. for sheet and roll film formats as required. The INDX 43 2.0b operates at a production speed of 24 cm/min at a developer time of 100 seconds.# max film width: 43cm (17 inch)# processing capacity:- Dev time: 22-124sec- 19 cm/min at 8min cylce time- DRY to DRY: 1‘30" to 9‘24" min- Intake speed 16-85cm/min
COLENTA INDX 43 5MWis a high speed fully automatic film processor with a production speed of 31cm/min at an 8 min cycle and provides many practical eco advantages in its design. Productivity and archival quality are key features in the INDX 43-5 design.# max processing width: 43cm# processing capacity: - Dev time: 26-154sec
- 31 cm/min at 8min cycle time- DRY to DRY: 2‘08" to 11‘45"- Intake speed 115-21cm/min
COLENTA INDX 43 55This model is our highest capacity unit in terms of films per hour and production speed, designed specifically for markets requiring a practical and dependable „work horse“ forcustomers with a high quantity of film to process daily.# max processing width: 43cm# processing capacity: - Dev time: 26-154sec
- 55 cm/min at 8min cycle time- DRY to DRY: 2‘08" to 11‘45"- Intake speed 115-21cm/min
All INDX Film Processors Include the following accessories within the selling price:-Replenishment storage tanks – typically 2x30 litres but other sizes are available Small user spare parts kit. Rack Carrier/drip tray
19www.tektraco.com
NDT processors+accessories
COLENTA INDX 37 NDT MobileOur INDX 37-NDT Mobile that provides a customer with a self contained film processing facility that can be installed inside a truck body or container and moved efficiently from location to location as required. The system is configured with all that is required for the automatic processing of industrial x-ray film sizes up to 35cm in width inside a vehicle and with a series of options to meet specific needs that a customer may havebased on their typical working sites and conditions.
COLENTA Mobile Lab ContainerEach container can be adapted for both analogue and digital inspection requirements with the equipment and services to meet precise ustomer requirements. The mobility and safety features within the design ensure ease of movement to a working location anywhere in the world.
COLENTA chemical mixing, transfer & storage consoleIt is a device able to make three different uses : mixing accurately the concentrate chemicals with water, transferring the DEV and FIX into the tank of the processor, acting also as Replenishment tank.
COLENTA water supply panel with filter and flow meter
COLENTA chiller ( external or internal )All film processors within our INDX range have the option to operate with a cold water cooling system or can connect to an internal or external Chiller system, dependant on the model of processor, when there is no available cold water supply to provide efficient cooling for the processor.The CHILLER system we offer ensures that both the developer and fixer solutions within the processor tanks are maintained to precise temperature and should be considered when there are no air conditioned rooms and no cold water available in the working area. These internal and external Chiller options are designed and onlyavailable from COLENTA.
COLENTA silver recovery system Silverfit 40An automated Silver Recovery system that connects directly to the fixer waste overflow from the processor tank and recovers the silver content precisely and in a very controlled way. Customers not having or wanting to connect the SilverFit 40 as a direct interface with their Colenta processor can of course use the recovery system as a „stand-alone“ facility within their working lab to collect silver from fixer waste as required.
COLENTA filmguides for sheet and/or rollfimWe also offer easily interchangeable SHEET FILM GUIDES that ensure a straight loading facility for customers loading the smaller width film sizes side by side ( 10X24, 6X48, etc) to maximise production capacity and avoiding loading mistakes by the operator. FILM GUIDES are also available for the longer length roll film. These guides can be Installed on the standard feeding film tray in seconds and removed in seconds
COLENTA Easy Clean cleaning productsSpecially formulated cleaning and algae control solutions for Roller Transport processors to keep the racks and tanks in clean condition.
TEKTRACO your reliable partner!20
Solutions since 1954
Portable Non-Destructive Metal Testing Instruments
21www.tektraco.com
2
Metal testing portfolioEquotip and flaw detection
Equotip Flaw detection
Leeb Portable Rockwell UCI
Oil
& g
as
Weld, base material & HAZ*
Pressure vessels
Flanges
Pipes
Wellhead equipment
Aut
om
otiv
e
Engine blocks
Shafts
Panels
Gears
Brake systems
Aer
osp
ace
Turbine blades
Casings/housings
Panels
Cast objects
Landing gears
Man
ufac
turin
g &
mac
hine
ry
Rolls
Coils
Bars/pipes
Heat treatment/casting
Wires
*HAZ: Heat-Affected Zone
22 TEKTRACO your reliable partner!
6
Equotip portable hardness testingProduct applications
Equotip Live Equotip 550 Equotip Piccolo /
Bambino 2UCI Leeb D UCI Portable Rockwell
Leeb
Sta
ndar
ds
ASTM A956
ISO 16895
DIN 50159
ASTM A1038
DIN 50157
Mea
sure
men
t sc
ales
HB
HV
HRA
HRB
HRC
HR15N
HR15T
HMMRC
HS
MPA
Ap
plic
atio
ns
Standard to large objects
Round objects
Light objects
Very hard objects
Cast objects
Polished objects
Limited accessibility
Thin objects
Heat treated surfaces
1 Equotip Piccolo 2 only. 2 In combination with support rings. 3 With impact device Leeb C. 4 With impact devices Leeb S and E. 5 With impact device Leeb G.6 With impact devices Leeb DC and DL. 7 With impact device Leeb DL.
1
22
3
3
6 7
4
5
2
23www.tektraco.com
7
Equotip Leeb impact devices Product applications
D/DC + Equotip Live
DL
S E G C
+ Equotip Piccolo/Bambino 2
Standard samples
Difficult to access samples
Extreme hardness ranges
Large and heavy components
Surface hardened components, coatings, thin samples
Measurement principlesEquotip Leeb, Portable Rockwell, UCI
LeebFast and easy
Measurement of an impact body’s velocity propelled by spring force against the surface of the test piece.
Portable RockwellIdeal for thin or light samples
Measurement of the indentation depth of a diamond forced into the test piece.
UCIWhen accessibility is limited
Measurement of the frequency shift, which correlates to the indentation.
24 TEKTRACO your reliable partner!
Equotip® 550The all-in-one portable solution
Equotip 550Three testing methods – one solution
Equotip 550 is the most versatile all-in-one solution for portable hardness testing using dynamic Leeb, Portable Rockwell, and UCI. Features such as multi-probe connec-tivity, custom conversion curves, customizable reports and data export to PC, deliver unparalleled flexibility with all three testing methods.
1 Leeb – Fast and easy
Equotip 550 Leeb covers a wide range of applications of the Leeb principle, the fastest and easiest method to determine hardness, thanks to its seven different impact devices and 16 support rings. New features such as wizards, reporting, mapping and many more, make hardness testing even more convenient and cost-effective than ever before.
2 Portable Rockwell – Ideal for thin or light samples
Equotip 550 Portable Rockwell is a static hardness measurement solution which is highly appreciated for applications on thin or light samples. Furthermore, it can be used on almost all materials without special adjustments, which also makes it popular to use as a reference method for other measurement principles. A wide variety of accessories make it a very versatile solution.
3 UCI – When accessibility is limited
Equotip 550 UCI is well suited for applications where accessibility is limited, such as welds, HAZ, or difficult surface structures. UCI measurements are fast and easy. With the world premiere of our UCI probe with an adjustable test load from HV1 to HV10, a wide range of applications can be covered flexibly with a single probe for the first time.
1
2
3
Equotip 550 with touchscreen display unit (from left to right): Portable Rockwell probe, UCI probe, and Leeb impact devices
25www.tektraco.com
9
Customizable views
Arrange the display of information according to your needs.
Scratch-resistant durable touchscreen
Durable and scratch-resistant touchscreen thanks to Gorilla® Glass Technology. Less reflection on screen thanks to the optional antiglare foil.
Responsive touchscreen
For ease-of-use with the high-resolution display.
Equotip® 550 Touchscreen unitBuilt for demanding environments
Equotip Piccolo/Bambino 2 Pocket-sized hardness testing
Equotip Piccolo 2 and Bambino 2 are both suited for on-site hardness checks of metals where the test indentation should be as small as possible. They are both supplied with a D impact device which can you can interchange with an optional DL impact device. You can use these for performing measurements in restricted areas. Equotip Piccolo 2 additionally offers user-defined hardness conversions, systematic real-time monitoring of hardness, and remote controlling of Equotip Piccolo 2 settings.
Connectors and circuits protected against dust and voltage spikes
Specifically designed protective rubber caps for all connectors, fulfilling the directives for low voltage safety and electromagnetic compatibility (EMC).
Shockproof housing optimized for robustness
Ergonomically designed and shock-absorbing rubberized housing, which offers protection against dust and water splashes (IP 54).
Equotip 540For dedicated single test methods
Equotip 540 enables regular, basic usage in hardness measurement without extensive reporting functionality. Offering essential features and a basic set of accessories, it supports portable hardness testing using either Leeb D or UCI.
Equotip AccessoriesAccessories and test block portfolio
An extensive range of hardness test blocks are available with different hardness levels for regular on-site verification. Proceq also provides a unique measuring clamp, support feet, and rings, allowing tests to be carried out on various test sample geometries.
Touchscreen display unit used with the Equotip 550 and 540 impact devices
26 TEKTRACO your reliable partner!
TEKTRACO your reliable partner!
Malta officeTektraco Ltd, B’Kara Road
San Gwann, Malta
Tel:35621374329, Fax:35621376667
Email: [email protected]
Libya Office TripoliAbu Haridah Street
AL-Sarim area , Tripoli Libya
Tel: (218) 091 799 8685
Email:[email protected]
WEBSITE: www.tektraco.com
Tektraco, through its N.D.T. ‘Testing and Inspection’ product specialists provides both a consultancy service as well as a wide range of products.
Tektraco Ltd are the official distributors of Fidgeon for Libya and Malta with regards to the supply of General NDT equipment.
• Radiography• Magnet Particle Inspection• Ultraviolet Equipment• Dye Penetrant Inspection• Radiometers• Ultrasonic Thickness Gauges• Welding Inspections• Temperature Measurement• Hardness Testing• Visual Inspection
General NDT Equipment
Mineral Specimen Preparation
Magnetic Field Indicators
Ultrasonic Flaw Detectors
High Intensity Lamp
High intensity viewers
Magnetic Field Indicators
Radiometers Magnetic field strips
