Multi-master Indexable_low Res

Expanding

www.iscar.com

now with

ExchangEab

lE

stEEl hEad

s

NEW

Your Milling options

Multi-Functional MastEr

The MULTI-MASTER was introduced by ISCAR in 2000. Originally a family of rotating tools with interchangeable cutting heads from solid carbide, it had a serious impact on the development of cutting tools. Now the family has a strong presence for manufacturing in various industrial sectors. In the MULTI-MASTER system, a solid carbide head is connected with a tool body (a shank) by a specially shaped thread. The success of the thread connection, in which the thread is produced directly on a solid carbide part, has changed pre-existing views on the reasonable practicality of such an approach.

In accordance with the MULTI-MASTER concept, one shank can carry the heads of different cutting shapes and the same head is suitable for mounting in the shanks of various dimensions and materials (steel, tungsten carbide or heavy metal). This concept considerably increases versatility and functionality of the family, significantly reduces demands of special (specially tailored) tools and allows for decreasing customer stock of cutting tools. A limited number of types of the MULTI-MASTER heads and shanks in combination with each other produce a great variety of cutting tools, which meets the most exacting customer requirements and ensures reducing production and logistics costs. The concept makes regrinding unnecessary, which is so common when using regular solid tools, and cardinally diminishes the consumption of tungsten carbide.

The MULTI-MASTER was designed as a family of indexable solid carbide tools. However, quickly it was found that the MULTI-MASTER opens up fresh opportunities for tools with indexable inserts.

Introduction of endmill heads with the thread connection that carry inserts allowed creating various indexable modular tools, which are based on the MULTI-MASTER shanks, adapters and reducers. Since then the advantages of the MULTI-MASTER have been applied to indexable milling. The customer received a new effective means for improving performance. For example, an assembled tool produced from a head with

inserts and a rigid solid carbide shank has increased stiffness, better dynamic behavior and thus successfully withstands vibrations without the need for reducing cutting data. The addition of an extension to a modular tool with inserts solves the problem of machining with high overhang without the necessity to purchase an additional long-reach cutter.

A further step was the SHANKMASTER TS (threaded shank) system of modular tools, comprising solid carbide shanks and milling heads with indexable inserts. The shanks and heads are connected by the MULTI-MASTER thread. However, the TS shanks are equipped with an external thread and the TS heads feature an internal thread. This is the opposite of the classical MULTI-MASTER design. The TS system allows for producing full carbide shanks without any brazed parts. This makes the connection very rigid and enables stable milling even at long overhang

application. Optionally, using adapters with internal thread on both their sides, the TS shanks

are suitable for mounting the MULTI-MASTER heads, too.

Thus, the advanced

ISCAR indexable milling families such as

SUMOMILL, HELIDO UPFEED, TANGPLUNGE and others are now

connected with the versatile MULTI-MASTER and its younger brother the

SHANKMASTER. A new indexable cutter can be assembled by selecting a milling head, which carries inserts, with a required shank diameter, length and shape. These features provide versatile and productive solutions and turn the MULTI-MASTER-based indexable milling cutters to be ideal for different applications.

Multi-MastEr: intElligEnt MultiFunctionalitY

1

MULTI-MASTER, SHANK-MASTER and FLEXFIT Connection Options

MILLING HEADS ADAPTERS SHANKS

MULTI-MASTER (MM)

SHANK-MASTER (TS)

FLEXFIT (M)

Features: Modular system reduces stock cost by using the same head with different shank options.

Enables machining with larger overthang.

Same head can be mounted on metric and inch combinations.

ISCAR2

Indexable Insert Milling Heads Contents

Indexable Insert Milling Heads Contents

Page

T290 ELN-MM-05 8

HP E90AN-MM-07 8

T490 ELN-MM..-08 9

H490 E90AX-MM 9

HM90 E90A-MM-10 10

HCE-MM 10

FF EWX-MM-04 11

FF EWX-MM-05 11

H400 ER-MM 12

ERW-MM 12

E93CN-NM 13

HCM-MM 13

BCM-MM 14

Type Page

TS T290 ELN 23

TS HP E90AN 23

TS FF EWX 24

TS HCM 24

TS BCM 25

TS HTP 26

3

Indexable Solid Carbide Milling HeadsFor further information, refer to ISCAR SOLID CARBIDE & MULTI-MASTER ENDMILLS catalog

Type Helix AngleNo. of Flutes

Diameter Range Remarks

MM HC-2 10 2 7.8-16

MM EA 45 2, 3 8-25High Speed Machining on aluminum

MM EA-CF ~40 3 12-20High Speed Machining on aluminum-Different helix CHATTERFREE

MM ECU-3 38 3 7.7-19.7 DIN 6885

MM EC-3 45 3 8-12.7

MM EC-4 30, 45 4 6-20

MM EC-6MM EC-D

30, 4550

66,8,10

8-12.78-20

MM EC-8/10 30, 45 8,10 16-25

MM EFS 45 4 8-25.4 FINISHRED

MM EFS-CF 38 4 6-25FINISHRED CHATTERFREE

MM EC-CF 38 4 8-25 CHATTERFREE

MM ERA 45 3 8-25 Rough machining on aluminum

MM ERS 45 4, 5, 6 8-25.4

MM EBA 45 2 8-25 Machining aluminum

ISCAR4

Indexable Solid Carbide Milling HeadsFor further information, refer to ISCAR SOLID CARBIDE & MULTI-MASTER ENDMILLS catalog

Type Helix AngleNo. of Flutes

Diameter Range Remarks

MM EB 30 2, 4 6-25

MM HCRMM HRF

2 8-16General Finishing

E

MM HBR 2 10-25.4 E

MM HT 2 10-20 E

MM HT-NWFR 2 12

MM HT-NCSR 2 12

MM FF 2 10-20 E

MM EFF 4, 6 8-25.4

MM ETR 30 6 8-16

MM HR 2 8-20 E

MM HCD 2 8-20 for DIN 74 screw E

MM ECF 4, 6 10-25

MM ECS 2 3.28-6.46 DIN 332

MM HDF 2 9.8-15.7 Double chamfering

MM EDF 39.4, 11.6

MM TS MM GRIT

63,4,612.7-2515.7, 17.7, 21.7, 27.7

MM GRIT-K/P-45A

3, 4 15.7, 17.7, 21.7

MM TS-DG 4 15.88, 19.05, 25.4

MM TRDMT-MM

3,43-615.7, 21.710-16

55-DIN ISO 228, B.S 8460-ISO 68, DIN13

MM ESB-G 8-16 Blanks

MM ESR-G 8-25 Blanks

E = Economical

5

Clamping and Indexing Instructions

Do not apply lubricant to the MULTI-MASTER threaded connection

USER GUIDE

Designation Thread Size Key (1)

TighteningTorque (Nxcm)

MM T05 MM KEY 6x4 700 MM T06 MM KEY 8x5 1000 MM T08 MM KEY 10x7 1500 MM T10 MM KEY 13x8 2800 MM T12 MM KEY 16x9 2800 MM T15 MM KEY 20 4000

(1) Order separately

1 2 3 4

HP E90AN-MM-0790 Endmills with a MULTI-MASTER Threaded Adaptation Carrying HELIPLUS HP ANKT 0702.. Inserts

D

T

L6L5

Ts

ap

D3

Rd

l

Designation D Z L6 Rd L5 ap Ts D3 T(1) KgHP E90AN-D10-1-MMT06 10.00 1 20.00 2.5 13.40 7.70 T06 8.93 8.0 0.03HP E90AN-D12-2-MMT08 12.00 2 24.45 2.7 16.50 7.70 T08 10.60 10.0 0.01HP E90AN-D16-3-MMT10 16.00 3 31.75 3.2 20.00 7.70 T10 14.95 13.0 0.03HP E90AN-D16-4-MMT10 16.00 4 31.75 3.2 20.00 7.70 T10 14.95 13.0 0.03HP E90AN-D20-4-MMT12 20.00 4 35.30 2.4 21.50 7.70 T12 18.40 16.0 0.04HP E90AN-D20-5-MMT12 20.00 5 35.30 2.4 21.50 7.70 T12 18.40 16.0 0.04


(1) Clamping wrench size

For inserts: HP ANCR 0702PNFR HP ANKT/ANCT 0702..PN-R/PNTR HP ANKW 070204PNTR .

Spare PartsDesignation Screw KeyHP E90AN-MM-07 SR 34-533/L/HG T-6/51

T290 ELN-MM-05Endmills with Tangentially Clamped Inserts and MULTI-MASTER Adaptation

D D3

T Tsap

L5L6

l

Designation D Z ap D3 Ts L5 L6 T(1) KgT290 ELN D10-02-MMT06-05 10.00 2 5.00 9.20 T06 13.40 20.00 8.0 0.01T290 ELN D12-03-MMT08-05 12.00 3 5.00 11.00 T08 16.00 24.00 10.0 0.06T290 ELN D14-03-MMT08-05 14.00 3 5.00 13.00 T08 16.06 24.00 10.0 0.01T290 ELN D16-04-MMT10-05 16.00 4 5.00 14.95 T10 19.25 31.00 13.0 0.03

Spare PartsDesignation Screw KeyT290 ELN D10-02-MMT06-05 SR 10503833-S T-7/51T290 ELN D12-03-MMT08-05 SR 10503833 T-7/51T290 ELN D14-03-MMT08-05 SR 10503833 T-7/51T290 ELN D16-04-MMT10-05 SR 10503833 T-7/51



For inserts: T290 LNMT/LNHT 0502

ISCAR6

H490 E90AX-MM90 Endmills with MULTI-MASTER Threaded Connection, Using H490 ANKX/ANCX 090...Double-Sided Rectangular Inserts.

D

L5

Ts

T

D3

ap

l

Designation D Z ap L5 D3 Ts T(1)H490 E90AX D16-2-MMT10-09 16.00 2 8.00 23.00 15.30 T10 13.0H490 E90AX D20-3-MMT12-09 20.00 3 8.00 24.00 18.70 T12 16.0



For inserts: H490 ANKX 0904-FF H490 ANKX/ANCX-09 .

Spare PartsDesignation Screw Torx Blade HandleH490 E90AX-MM SR 10508082-HG BLD T08/M7 SW4-SD

T490 ELN-MM..-0890 Endmills with MULTI-MASTER Threaded Adaptation Carrying Tangentially Clamped Inserts

D3Ts

T

ap

D

L5L6

Rd

l

Designation D Z ap D3 L5 L6 Ts T(1) Rd KgT490 ELN D16-2-MMT10 16.00 2 8.00 14.70 20.00 32.00 T10 13.0 2.0 0.06T490 ELN D20-2-MMT12 20.00 2 8.00 18.70 21.50 35.00 T12 16.0 1.7 0.09T490 ELN D20-3-MMT12 20.00 3 8.00 18.70 21.50 35.00 T12 16.0 1.7 0.05



For inserts: T490 LNMT/LNHT 0804 .

Spare PartsDesignation Screw KeyT490 ELN D16-2-MMT10 SR 10502813-HGSM IP-7/51T490 ELN D20-2-MMT12 SR 10502813-HG-M IP-7/51T490 ELN D20-3-MMT12 SR 10502813-HG-M IP-7/51

7

HCE-MMMultifunction Endmills with MULTI-MASTER Threaded Adaptation, which can Carry Several Insert Geometries

D3

TS

L6L5

D

T

l

Designation D L6 L5 Ts D3 T(1) KgHCE D12/.50-MMT08 12.00 28.00 20.00 T08 11.50 10.0 0.09HCE D16/.62-MMT10 16.00 36.75 25.00 T10 15.20 13.0 0.12HCE D20/.75-MMT12 20.00 48.80 35.00 T12 18.50 15.0 0.06


For undercutting use HTR inserts only. The dimensions are for HCC inserts with r=0.5 mm

(1) Clamping wrench size (should be ordered separately).

For inserts: HCC-QF HTR-QF .

Spare PartsDesignation Screw Torx Blade T-HandleHCE D12/.50-MMT08 SR 34-540 BLD T15/S7 SW6-THCE D16/.62-MMT10 SR 105739 BLD T20/S7 SW6-THCE D20/.75-MMT12 SR 1052964 BLD T25/S7 SW6-T

HM90 E90A-MM-1090 Endmills with MULTI-MASTER Threaded Adaptation Carrying HM90 AP.. 1003... Inserts

T Ts

D3

L6L5

ap

D

Rd

l

Designation D Z ap L6 Rd L5 Ts T(1) D3 KgHM90 E90A-D16-2-MMT10 16.00 2 10.00 34.75 15.0 23.00 T10 13.0 15.30 0.03HM90 E90A-D20-2-MMT12 20.00 2 10.00 38.30 7.5 24.60 T12 16.0 19.20 0.05HM90 E90A-D20-3-MMT12 20.00 3 10.00 38.30 7.5 24.60 T12 16.0 19.20 0.05



For inserts: APCR 1003PDFR-P APCT 1003PDR-HM APKR 1003PDR-HM APKT 1003...TR-RM APKT 1003..R APKT 1003PDR-HM APKT 1003PDTR-76 APKT 1003PDTR-8M APKT 1003PDTR/L-RM APKT 1003R8T-FF APKW 100304 PDR (PCD) HM90 APCR 100304PDFR-P/DP HM90 APCT 1003 HM90 APKT 1003 HM90 APKT 1003PD-W HM90 APKW 1003PDR .

Spare PartsDesignation Screw KeyHM90 E90A-MM-10 SR 34-505/HG T-8/53

ISCAR8

FF EWX-MM-05Fast Feed Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges

L6L5

17

D3DD1

T Ts

ap max

Rd

Designation D1 D Z Ts L5 L6 D3 T(1) Rd KgFF EWX D25-3-MMT15-05 25.0 15.00 3 T15 30.00 47.60 23.90 19.0 5.0 0.09


Insert radius for programming r=1.9 mm


For inserts: H600 WXCU 05 .

Spare PartsDesignation Screw KeyFF EWX-MM-05 SR 10508600 T-9/51

FF EWX-MM-04Fast Feed Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges

L6L5

17

D3DD1

T Ts

ap max

Rd

l

Designation D1 D Z D3 Ts L5 L6 T(1) Rd KgFF EWX D16-2-MMT10-04 16.0 8.60 2 15.20 T10 19.50 31.25 12.0 5.0 0.02FF EWX D20-3-MMT12-04 20.0 12.60 3 18.80 T12 25.00 38.80 15.0 4.8 0.05FF EWX D25-4-MMT15-04 25.0 17.60 4 23.90 T15 30.00 47.60 19.0 3.3 0.10


apmax=1.5 mm; Insert radius for programming r=1.9 mm


For inserts: H600 WXCU 04 .

Spare PartsDesignation Screw KeyFF EWX-MM-04 SR M2.5X6-T7-60 T-7/51

9

ERW-MMRough Profiling Tools with a MULTI-MASTER Adaptation

Ts

T

D3

L6L5

D1

di

D

Rd

l

Designation D1 D di Z D3 L6 L5 T(1) Ts Rd KgERW D013A025-2-MMT15-12 25.0 13.00 12.00 2 24.00 53.00 36.00 17.0 T15 2.0 0.09



For insert: RCMT/RCCT-MO RCMT/RCMW/RCCW-FW RCMW/RCCW-MO .

Spare PartsDesignation Screw Torx Blade T-HandleERW-MM SR 14-601 BLD T15/S7 SW6-T

H400 ER-MMEndmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with Four Radii Cutting Edges

D3DD1

L6L5

ap

T

Ts

Rd

l

Designation D1 D D3 Ts Z ap L5 L6 T(1) Rd KgH400 ER D25-3-MMT15-10 25.0 15.00 23.80 T15 3 7.50 28.00 45.00 19.0 5.8 0.08



For inserts: H400 RNHU .

Spare PartsDesignation Screw KeyH400 ER-MM SR 10508600 T-9/51

ISCAR10

HCM-MMBall Nose Multifunction Endmills with MULTI-MASTER Threaded Adaptation

D

L6

Ts

L5

D3T

l

Designation D L6 L5 D3 Ts T(1) KgHCM D12/.50-MMT08 12.00 28.00 20.00 11.50 T08 10.0 0.01HCM D16/.62-MMT10 16.00 36.75 25.00 15.20 T10 13.0 0.03HCM D20/.75-MMT12 20.00 48.80 35.00 18.50 T12 15.0 0.06HCM D25/1.0-MMT15 25.00 63.00 46.00 24.00 T15 20.0 0.13


The dimensions are for HBR inserts.


For inserts: HBF-QF HBR-QF HCD-QF HCR .

Spare PartsDesignation Screw Torx Blade T-HandleHCM D12/.50-MMT08 SR 34-540 BLD T15/S7 SW6-THCM D16/.62-MMT10 SR 10503579 BLD T20/S7 SW6-THCM D20/.75-MMT12 SR 1052964 BLD T25/S7 SW6-THCM D25/1.0-MMT15 SR 1051666 BLD T25/S7 SW6-T

E93CN-MMBull Nose Endmills with MULTI-MASTER Threaded Adaptation Carrying Toroidal Inserts

D

apL5

D3

L6

T Ts

3 Rd

l

Designation D(1) ap Z L5 L6 Rd Ts D3 T(2) KgE93CN D16-2-MMT10-07 16.00 5.00 2 27.00 38.64 4.0 T10 15.00 13.0 0.03E93CN D20-3-MMT12-07 20.00 5.00 3 27.00 41.00 3.0 T12 19.00 16.0 0.05


(1) Diameter D according to insert corner radius r=1.0 mm (2) Clamping wrench size

For inserte: CNHT/MT 07 .

Spare PartsDesignation Screw KeyE93CN-MM SR 34-505/LHG T-8/53

R 0.8 1.0 1.5 2.0 2.5 3.0

D +0.03 0.0 -0.07 -0.14 -0.21 -0.28

Diameter Change According to Insert Radius

11

BCM-MMBall Nose Endmills with MULTI-MASTER Threaded Adaptation Carrying Tangent Straight Edge Inserts for Finish Profiling

TS D3

T(1)

apL5

L6

r

D

Rd

l

Designation D r ap Z L5 L6 T(1) D3 Ts Coolant Kg InsertBCM D12-MMT08 12.00 6.00 9.60 2 20.00 28.00 10.0 11.50 T08 - 0.01 BCR D120BCM D16-MMT10 16.00 8.00 12.70 2 25.00 36.80 13.0 15.20 T10 - 0.03 BCR D160BCM D20-MMT12 20.00 10.00 17.00 2 35.00 48.80 15.0 18.50 T12 - 0.06 BCR D200BCM D25-MMT15-C 25.00 12.50 20.00 2 40.00 57.00 19.0 24.00 T15 Y 0.10 BCR D250



For inserts: BCR .

Spare PartsDesignation Screw Key Torx Blade T-HandleBCM D12-MMT08 SR 10503457 T-6/51BCM D16-MMT10 SR 34-505/LHG T-8/53BCM D20-MMT12 SR 34-506/L T-9/51BCM D25-MMT15-C SR 14-601 BLD T15/S7 SW6-T

ISCAR12

Designation Tsi d D2 h L1 L Shank m. Coolant KgMM S-A-L060-C08-T05 T05 8.00 7.60 12.50 15.0 60.00 S N 0.02MM S-A-L070-C08-T05-C T05 8.00 7.60 18.00 20.0 70.00 C N 0.04MM S-A-L070-C08-T05-W T05 8.00 7.60 18.90 20.0 70.00 W N 0.06MM S-A-L090-C08-T05-C T05 8.00 7.60 38.00 40.0 90.00 C N 0.06MM S-A-L090-C08-T05-W T05 8.00 7.60 38.90 40.0 90.00 W N 0.07MM S-A-L110-C08-T05-C T05 8.00 7.60 57.90 60.0 110.00 C N 0.07MM S-A-L110-C08-T05-W T05 8.00 7.60 58.90 60.0 110.00 W N 0.09MM S-A-L070-C10-T06-C T06 10.00 9.60 18.00 20.0 70.00 C N 0.01MM S-A-L070-C10-T06-W-H T06 10.00 9.60 18.90 20.0 70.00 W Y 0.08MM S-A-L075-C10-T06 T06 10.00 9.55 17.40 20.0 75.00 S N 0.05MM S-A-L075-C10-T06-H T06 10.00 9.55 18.80 20.0 75.00 S Y 0.04MM S-A-L090-C10-T06-C T06 10.00 9.60 38.00 40.0 90.00 C N 0.01MM S-A-L090-C10-T06-W T06 10.00 9.55 17.20 20.0 90.00 W N 0.12MM S-A-L090-C10-T06-W-H T06 10.00 9.60 39.00 40.0 90.00 W Y 0.10MM S-A-L110-C10-T06-C T06 10.00 9.60 57.90 60.0 110.00 C N 0.11MM S-A-L110-C10-T06-W-H T06 10.00 9.60 59.00 60.0 110.00 W Y 0.12MM S-A-L150-C10-T06-C T06 10.00 9.60 98.50 100.0 150.00 C N 0.15MM S-A-L070-C12-T08-C T08 12.00 11.50 17.90 20.0 70.00 C N 0.11MM S-A-L070-C12-T08-W-H T08 12.00 11.50 18.70 20.0 70.00 W Y 0.11MM S-A-L090-C12-T08 T08 12.00 11.50 13.30 16.0 90.00 S N 0.10MM S-A-L090-C12-T08-H T08 12.00 11.50 38.70 40.0 90.00 S Y 0.08MM S-A-L090-C12-T08-CH T08 12.00 11.50 41.00 42.0 90.00 S Y 0.07MM S-A-L090-C12-T08-C T08 12.00 11.50 37.00 40.0 90.00 C N 0.12MM S-A-L090-C12-T08-W-H T08 12.00 11.50 38.70 40.0 90.00 W Y 0.15MM S-A-L110-C12-T08-W-H T08 12.00 11.50 58.70 60.0 110.00 W Y 0.18MM S-A-L110-C12-T08-C T08 12.00 11.50 57.80 60.0 110.00 C N 0.16MM S-A-L110-C12-T08-W T08 12.00 11.50 17.00 20.0 110.00 W N 0.09MM S-A-L130-C12-T08-C T08 12.00 11.50 77.80 80.0 130.00 C N 0.19MM S-A-L130-C12-T08-W-H T08 12.00 11.50 78.70 80.0 130.00 W Y 0.21MM S-A-L070-C16-T10-W-H T10 16.00 15.20 18.20 20.0 70.00 W Y 0.21MM S-A-L090-C16-T10-C T10 16.00 15.20 37.50 40.0 90.00 C N 0.21MM S-A-L090-C16-T10-W-H T10 16.00 15.20 38.20 40.0 90.00 W Y 0.27MM S-A-L100-C16-T10 T10 16.00 15.20 16.30 20.0 100.00 S N 0.16MM S-A-L100-C16-T10-H T10 16.00 15.20 48.00 50.0 100.00 S Y 0.13MM S-A-L100-C16-T10-CH T10 16.00 15.20 40.20 42.0 100.00 S Y 0.14MM S-A-L110-C16-T10-C T10 16.00 15.20 58.00 60.0 110.00 C N 0.27MM S-A-L110-C16-T10-W-H T10 16.00 15.20 58.20 60.0 110.00 W Y 0.33MM S-A-L130-C16-T10-C T10 16.00 15.20 77.40 80.0 130.00 C N 0.32MM S-A-L130-C16-T10-W-H T10 16.00 15.20 78.20 80.0 130.00 W Y 0.39MM S-A-L150-C16-T10-C T10 16.00 15.20 97.40 100.0 150.00 C N 0.37MM S-A-L150-C16-T10-W-H T10 16.00 15.20 98.20 100.0 150.00 W Y 0.45MM S-A-L090-C20-T12-C T12 20.00 18.30 36.60 40.0 90.00 C N 0.32MM S-A-L090-C20-T12-W-H T12 20.00 18.30 36.90 40.0 90.00 W Y 0.41MM S-A-L120-C20-T12 T12 20.00 18.30 20.30 25.0 120.00 S N 0.44MM S-A-L120-C20-T12-H T12 20.00 18.30 66.70 70.0 120.00 S Y 0.25MM S-A-L130-C20-T12-C T12 20.00 18.30 76.50 80.0 130.00 C N 0.47MM S-A-L130-C20-T12-W-H T12 20.00 18.30 76.90 80.0 130.00 W Y 0.59MM S-A-L170-C20-T12-C T12 20.00 18.30 97.20 100.0 170.00 C N 0.63MM S-A-L200-C20-T12-C T12 20.00 18.30 116.50 120.0 200.00 C N 0.76MM S-A-L200-C20-T12-W-H T12 20.00 18.30 116.90 120.0 200.00 W Y 0.92MM S-A-L120-C25-T15-C T15 25.00 23.90 58.00 60.0 120.00 C N 0.64MM S-A-L120-C25-T15-W-H T15 25.00 23.90 58.00 60.0 120.00 W Y 0.89MM S-A-L135-C25-T15 T15 25.00 23.90 33.00 35.0 135.00 S N 0.47MM S-A-L135-C25-T15-CH T15 25.00 23.90 33.00 35.0 135.00 S Y 0.72MM S-A-L170-C25-T15-C T15 25.00 23.90 98.00 100.0 170.00 C N 0.96MM S-A-L170-C25-T15-W-H T15 25.00 23.90 98.00 100.0 170.00 W Y 1.28MM S-A-L175-C25-T15 T15 25.00 23.90 62.70 65.0 175.00 S N 0.10MM S-A-L210-C25-T15-W-H T15 25.00 23.90 108.00 110.0 210.00 W Y 1.61MM S-A-L250-C25-T15-C T15 25.00 23.90 148.00 150.0 250.00 C N 1.45

MM S-A (stepped shanks)Stepped Cylindrical Shanks for Interchangeable Milling Heads

L1L

h

d

TsiMM S-A-L...-H

MM S-A-L...-CH

D2

13

MM GRT (shanks)Solid Carbide Cylindrical Shanks for Interchangeable Milling Heads

Tsi

L

d

Designation Tsi d L Shank(1) Coolant KgMM GRT-095-T06 T06 9.50 80.00 C N 0.07MM GRT-100-T06 T06 10.00 100.00 C N 0.10MM GRT-120C-T08 T08 12.00 100.00 C Y 0.12MM GRT-127C-T08 T08 12.70 120.00 C Y 0.17

(1) C-Cylindrical

Spare PartsDesignation Clamping KeyMM GRT-095-T06 MM EGR 16-18MM GRT-100-T06 MM EGR 16-18MM GRT-120C-T08 MM EGR 20-22MM GRT-127C-T08 MM EGR 20-22

MM TS-ACylindrical Shanks for Interchangeable Milling Heads

D2

TsiMM TS-A-L...-H

L

d

Designation Tsi d D2 L Coolant KgMM TS-A-L070-C08-T05 T05 8.00 8.00 70.00 N 0.03MM TS-A-L080-C10-T06 T06 10.00 10.00 80.00 N 0.07MM TS-A-L080-C10-T06-H T06 10.00 10.00 80.00 Y 0.04MM TS-A-L090-C12-T08 T08 12.00 12.00 90.00 N 0.12MM TS-A-L090-C12-T08-H T08 12.00 12.00 90.00 Y 0.08MM TS-A-L100-C16-T10 T10 16.00 16.00 100.00 N 0.17MM TS-A-L100-C16-T10-H T10 16.00 16.00 100.00 Y 0.14

Do not apply lubricant to the threaded connection

Use carbide shanks for groove milling heads and for applications requiring high rigidity and precision.Each shank is supplied with MM EGR clamping key.Keys for other milling heads must be ordered separately.

ISCAR14

MM S-B (85 conical shanks)85 Conical Shanks for Interchangeable Milling Heads

L

d

a

Tsi

L1

D2

h

Designation Tsi a d D2 Shank(1) L1 L Shank m. h KgMM S-B-L080-C12-T05 T05 85 12.00 7.60 C 25.0 80.00 S - 0.06MM S-B-L125-C16-T06 T06 85 16.00 9.60 C 34.0 125.00 S 31.50 0.26MM S-B-L140-C20-T06-W T06 85 20.00 9.60 C 60.0 140.00 W - 0.62MM S-B-L140-C16-T08 T08 85 16.00 11.50 C 22.0 140.00 S 19.20 0.22MM S-B-L140-C20-T10 T10 85 20.00 15.20 C 27.5 140.00 S - 0.34MM S-B-L170-C25-T10 T10 85 25.00 15.20 C 56.0 170.00 S - 0.16MM S-B-L160-C25-T12 T12 85 25.00 18.30 C 40.0 160.00 S - 0.11MM S-B-L190-C32-T12 T12 85 32.00 18.30 C 80.0 190.00 S - 0.56MM S-B-L200-C32-T15 T15 85 32.00 23.90 C 50.0 200.00 S - 0.30MM S-B-L250-W40-T15 T15 85 40.00 23.90 W 100.0 250.00 S - 2.05

Shank material (Shank m.): S-steel, W-tungsten. Do not apply lubricant to the threaded connection.

(1) C-Cylindrical, W-Weldon

MM S-A (straight shanks)Shanks for Interchangeable Milling Heads

L

dD2

Tsi

L

dD2

Tsi

Designation Tsi d D2 Shank(2) L KgMM S-A-L050-C08-T04 T04 8.00 5.60 C 50.00 0.02MM S-A-L055-W12-T05 T05 12.00 7.60 W 55.00 0.05MM S-A-L065-W16-T06 T06 16.00 9.50 W 65.00 0.11MM S-A-L065-W16-T08 T08 16.00 11.50 W 65.00 0.10MM S-A-L070-W20-T10 T10 20.00 15.20 W 70.00 0.18MM S-A-L075-W25-T12 T12 25.00 18.30 W 75.00 0.31MM S-A-L100-W32-T15 T15 32.00 23.90 W 100.00 0.30MM S-A-L150-C12-T05-B (1) T05 12.00 7.60 C 150.00 0.12MM S-A-L200-C16-T06-B (1) T06 16.00 9.60 C 200.00 0.45MM S-A-L250-C20-T08-B (1) T08 20.00 11.50 C 250.00 0.60MM S-A-L250-C25-T10-B (1) T10 25.00 15.20 C 250.00 0.94

Do not apply lubricant to the threaded connection.

(1) "B" suffix - cylindrical shank which may be shortened. (2) C-Cylindrical, W-Weldon

15

MM S-D (89 conical shanks)89 Conical Shanks for Interchangeable Milling Heads

d

h

L

a

L1

D2

Tsi

Designation Tsi a d D2 L1 L Shank m. h Coolant KgMM S-D-L100-C12-T05 T05 89 12.00 7.60 35.0 100.00 S 29.60 N 0.15MM S-D-L110-C12-T05-C T05 89 12.00 7.60 60.0 110.00 C 55.90 N 0.13MM S-D-L110-C12-T05-W-H T05 89 12.00 7.60 60.0 110.00 W 55.70 Y 0.14MM S-D-L130-C12-T05-C T05 89 12.00 7.60 80.0 130.00 C 77.30 N 0.15MM S-D-L130-C12-T05-W-H T05 89 12.00 7.60 80.0 130.00 W 76.40 Y 0.16MM S-D-L150-C16-T05-C T05 89 16.00 7.60 100.0 150.00 C 91.50 N 0.02MM S-D-L110-C12-T06-W-H T06 89 12.00 9.60 60.0 110.00 W 58.80 Y 0.17MM S-D-L130-C16-T06-W-H T06 89 16.00 9.60 80.0 130.00 W 73.40 Y 0.29MM S-D-L150-C16-T06-C T06 89 16.00 9.60 100.0 150.00 C 95.40 N 0.11MM S-D-L150-C16-T06-W-H T06 89 16.00 9.60 100.0 150.00 W 93.80 Y 0.33MM S-D-L160-C16-T06 T06 89 16.00 9.60 55.0 160.00 S 46.80 N 0.12MM S-D-L170-C16-T06-C T06 89 16.00 9.60 120.0 170.00 C 116.90 N 0.11MM S-D-L170-C16-T06-W T06 89 16.00 9.60 55.0 170.00 W 46.30 N 0.48MM S-D-L130-C16-T08-C T08 89 16.00 11.50 80.0 130.00 C 77.20 N 0.28MM S-D-L130-C16-T08-W-H T08 89 16.00 11.50 80.0 130.00 W 76.40 Y 0.32MM S-D-L150-C16-T08-C T08 89 16.00 11.50 100.0 150.00 C 97.80 N 0.33MM S-D-L150-C16-T08-W-H T08 89 16.00 11.50 100.0 150.00 W 96.70 Y 0.38MM S-D-L170-C20-T08 T08 89 20.00 11.50 80.0 170.00 S 69.70 N 0.30MM S-D-L170-C20-T08-C T08 89 20.00 11.50 120.0 170.00 C 112.00 N 0.49MM S-D-L170-C20-T08-W T08 89 20.00 11.50 80.0 170.00 W 69.70 N 0.09MM S-D-L170-C20-T08-W-H T08 89 20.00 11.50 120.0 170.00 W 113.10 Y 0.53MM S-D-L150-C20-T10-C T10 89 20.00 15.20 120.0 150.00 C 97.50 N 0.08MM S-D-L150-C20-T10-W-H T10 89 20.00 15.20 100.0 150.00 W 96.80 Y 0.60MM S-D-L170-C20-T10-C T10 89 20.00 15.20 120.0 170.00 C 118.30 N 0.61MM S-D-L170-C20-T10-W-H T10 89 20.00 15.20 120.0 170.00 W 118.00 Y 0.73MM S-D-L190-C20-T10 T10 89 20.00 15.20 80.0 190.00 S 73.70 N 0.20MM S-D-L190-C20-T10-C T10 89 20.00 15.20 140.0 190.00 C 140.00 N 0.68MM S-D-L190-C20-T10-W-H T10 89 20.00 15.20 140.0 190.00 W - Y 0.83MM S-D-L210-C20-T10-C T10 89 20.00 15.20 160.0 210.00 C 160.00 N 0.75MM S-D-L210-C20-T10-W-H T10 89 20.00 15.20 160.0 210.00 W - Y 0.93MM S-D-L180-C25-T12-C T12 89 25.00 18.30 120.0 180.00 C 115.70 N 0.91MM S-D-L180-C25-T12-W-H T12 89 25.00 18.30 120.0 180.00 W 114.60 Y 1.17MM S-D-L200-C25-T12-W-H T12 89 25.00 18.30 150.0 200.00 W 146.60 Y 1.21MM S-D-L210-C25-T12 T12 89 25.00 18.30 100.0 210.00 S 94.60 N 0.66MM S-D-L250-C25-T12-C T12 89 25.00 18.30 140.0 250.00 C 135.60 N 1.40MM S-D-L250-C25-160T12W-H T12 89 25.00 18.30 160.0 250.00 W 157.20 Y 1.77MM S-D-L250-C25-T12-W-H T12 89 25.00 18.30 140.0 250.00 W 135.60 Y 1.80MM S-D-L250-C32-T15 T15 89 32.00 23.90 100.0 250.00 S 90.10 N 2.40MM S-D-L250-C32-T15-C T15 89 32.00 23.90 150.0 250.00 C 143.30 N 2.25MM S-D-L300-C32-T15-C T15 89 32.00 23.90 200.0 300.00 C 195.70 N 2.62

Shank material (Shank m.): S-steel, C-carbide, W-tungsten. Do not apply lubricant to the threaded connection.

ISCAR16

MM CAB-T-TMULTI-MASTER Shank Extensions

TsT (1)Tsi

D2

L

Designation D2 Ts Tsi L T(1) KgMM CAB T05T05-25/1.0-C 7.60 T05 T05 25.40 6.0 0.12MM CAB T06T06-25/1.0-C 9.30 T06 T06 25.40 8.0 0.02MM CAB T08T08-25/1.0-C 11.50 T08 T08 25.40 10.0 0.02MM CAB T10T10-38/1.5-C 15.20 T10 T10 38.10 13.0 0.08MM CAB T12T12-38/1.5-C 18.30 T12 T12 38.10 16.0 2.62MM CAB T15T15-45/1.77-C 23.90 T15 T15 45.00 20.0 0.21

Clamping key should be ordered separately.


MM S-ERShanks for MULTI-MASTER Solid Carbide Heads with ER Collet Adaptation

Tsi

D2D1

LL

L1L1

D2TsiHex Key

SS

h

aSS

1 2

Designation SS Tsi a D2 D1 h L1 L Key(1) Fig.MM S-A-H004-ER11-T05 ER11 T05 - 7.60 - - 4.0 26.50 6.35 1MM S-A-H10.5-ER11-T05 ER11 T05 - 7.60 - - 10.5 33.00 6.35 1MM S-A-H004-ER16-T05 ER16 T05 - 7.60 - - 4.0 33.50 7.94 1MM S-A-H004-ER16-T06 ER16 T06 - 9.00 - - 4.0 33.50 7.94 1MM S-A-H004-ER16-T08 ER16 T08 - 11.50 - - 4.0 33.50 7.94 1MM S-A-H10.5-ER16-T05 ER16 T05 - 7.60 - - 10.5 43.10 7.94 1MM S-A-H10.5-ER16-T06 ER16 T06 - 9.00 - - 10.5 43.10 7.94 1MM S-A-H013-ER16-T08 ER16 T08 - 11.50 - - 13.0 45.60 7.94 1MM S-A-H004-ER20-T05 ER20 T05 - 7.60 - - 4.0 40.60 11.11 1MM S-A-H004-ER20-T06 ER20 T06 - 9.00 - - 4.0 40.60 11.11 1MM S-A-H004-ER20-T08 ER20 T08 - 11.50 - - 4.0 40.60 11.11 1MM S-A-H004-ER20-T10 ER20 T10 - 15.20 - - 4.0 40.60 11.11 1MM S-A-H10.5-ER20-T05 ER20 T05 - 7.60 - - 10.5 47.10 11.11 1MM S-A-H10.5-ER20-T06 ER20 T06 - 9.00 - - 10.5 47.10 11.11 1MM S-A-H013-ER20-T08 ER20 T08 - 11.50 - - 13.0 49.60 11.11 1MM S-A-H016-ER20-T10 ER20 T10 - 15.20 - - 16.0 52.60 11.11 1MM S-A-H004-ER25-T05 ER25 T05 - 7.60 - - 4.0 44.60 14.29 1MM S-A-H004-ER25-T06 ER25 T06 - 9.00 - - 4.0 44.60 14.29 1MM S-A-H10.5-ER25-T06 ER25 T06 - 9.00 - - 10.5 51.10 14.29 1MM S-A-H004-ER25-T08 ER25 T08 - 11.50 - - 4.0 44.60 14.29 1MM S-A-H10.5-ER25-T08 ER25 T08 - 11.50 - - 10.5 51.10 14.29 1MM S-A-H004-ER25-T10 ER25 T10 - 15.20 - - 4.0 44.60 14.29 1MM S-A-H10.5-ER25-T10 ER25 T10 - 15.20 - - 10.5 51.10 14.29 1MM S-A-H004-ER25-T12 ER25 T12 - 18.30 - - 4.0 44.60 14.29 1MM S-A-H10.5-ER25-T12 ER25 T12 - 18.30 - - 10.5 51.10 14.29 1MM S-A-H025-ER32-T06 ER32 T06 - 9.60 10.0 18.00 25.0 65.00 - 2MM S-B-H025-ER32-T06 ER32 T06 5 9.60 13.5 22.30 25.0 65.00 - 2MM S-B-H050-ER32-T06 ER32 T06 5 9.60 17.9 47.30 50.0 90.00 - 2MM S-B-H075-ER32-T06 ER32 T06 5 9.60 22.6 74.10 75.0 115.00 - 2MM S-D-H050-ER32-T06 ER32 T06 1 9.60 11.2 45.00 50.0 90.00 - 2


(1) Inch size spanners (displayed in mm)

17

MM S-ER-HShanks for MULTI-MASTER Solid Carbide Heads with ER Collet Adaptation and Coolant Holes

LL1

Hex Key D2

SSTsi

Designation SS Tsi D2 L1 L Key KgMM S-A-H025-ER32-T05-H ER32 T05 7.62 25.0 69.60 19.05 0.20MM S-A-H040-ER32-T05-H ER32 T05 7.62 40.0 85.60 19.05 0.30MM S-A-H025-ER32-T06-H ER32 T06 9.00 25.0 69.60 19.05 0.59MM S-A-H040-ER32-T06-H ER32 T06 9.00 40.0 85.60 19.05 0.22MM S-A-H025-ER32-T08-H ER32 T08 11.50 25.0 69.60 19.05 0.20MM S-A-H050-ER32-T08-H ER32 T08 11.50 50.0 94.60 19.05 0.23MM S-A-H025-ER32-T10-H ER32 T10 15.20 25.0 69.60 19.05 0.20MM S-A-H050-ER32-T10-H ER32 T10 15.20 50.0 94.60 19.05 0.25MM S-A-H025-ER32-T12-H ER32 T12 18.30 25.0 69.60 19.05 0.22MM S-A-H050-ER32-T12-H ER32 T12 18.30 50.0 94.60 19.05 0.22MM S-A-H025-ER32-T15-H ER32 T15 23.90 25.0 69.60 19.05 0.21MM S-A-H050-ER32-T15-H ER32 T15 23.90 50.0 94.60 19.05 0.25


MM S-A-HSKHSK DIN69893 Form A Integral Tapered Shanks, for MULTI-MASTER Milling Heads

L

R

D2SS

L3

L1

Tsi

l

Designation SS Tsi D2 L3 L1 L RMM S-A-H050-HSK A63-T06 63 T06 9.50 18.00 24.0 50.00 6.0MM S-A-H050-HSK A63-T08 63 T08 11.50 18.00 24.0 50.00 6.0MM S-A-H055-HSK A63-T10 63 T10 15.20 23.00 29.0 55.00 6.0MM S-A-H055-HSK A63-T12 63 T12 18.30 23.00 29.0 55.00 6.0MM S-A-H060-HSK A63-T15 63 T15 23.90 28.00 34.0 60.00 6.0


ISCAR18

MM S-A-SKDIN 69871 Integral Tapered Shanks, for MULTI-MASTER Milling Heads

RSS

G

D2

L3L1

L

Tsi

l

Designation SS Tsi D2 L3 L1 L RMM S-A-H040-SK 40-T06 40 T06 9.50 15.00 21.0 40.00 6.0MM S-A-H045-SK 40-T08 40 T08 11.50 20.00 26.0 45.00 6.0MM S-A-H050-SK 40-T10 40 T10 15.20 25.00 31.0 50.00 6.0MM S-A-H050-SK 40-T12 40 T12 18.30 25.00 31.0 50.00 6.0MM S-A-H050-SK 40-T15 40 T15 23.90 25.00 31.0 50.00 6.0


19

ts shanK-MastErModular shank cutting tools

ISCARs TS (SHANK-MASTER) is comprised of solid carbide shanks and interchangeable cutting heads, carrying indexable inserts. The design allows for producing full carbide shanks without any brazed parts. This makes the connection very rigid and ensures stable cutting even at long overhang applications.

The shanks and milling heads are connected by the MULTI-MASTER thread. However, the TS shanks are equipped with an external thread and the TS milling heads feature an internal thread. This is the opposite of the current MULTI-MASTER system.

The TS modular system consists of a variety of the interchangeable heads, including the following advanced ISCAR milling families: SUMOMILL, TANGPLUNGE, HELIDO UPFEED, DROPMILL, BALLPLUS and HELIPLUS.

Similar to the MULTI-MASTER system, a TS tool can be assembled by selecting a milling head with the required shank diameter and length. These features provide a versatile system. The high-accuracy TS connection provides the customer with a new very rigid tool, ensuring high productivity, due to reduced vibration in long overhang applications, such as in deep surfaces. The SHANK-MASTER system is an ideal solution for die and mold, aerospace and power generation industries.

The TS system comprises also steel adapters (TS CAB) with internal threads on both sides. These adapters, mounted on the TS shanks, can use all the currently available standard MULTI-MASTER milling heads, expanding the configuration options of both systems.

ISCAR20

TS T290 ELNEndmill Heads with Tangentially Clamped Inserts and SHANK-MASTER Threaded Adaptation

D3

T (1)

Tsi

L5

ap

D

l

Designation D Z ap D3 L5 Tsi T(1) KgTS T290 ELN D12-03-T08-05 12.00 3 5.00 11.50 20.00 T08 10.0 0.01TS T290 ELN D16-04-T10-05 16.00 4 5.00 15.20 25.00 T10 13.0 0.02TS T290 ELN D20-06-T12-05 20.00 6 5.00 18.50 30.00 T12 16.0 0.01


For inserts: T290 LNMT/LNHT 0502 .

Spare PartsDesignation Screw KeyTS T290 ELN SR 10503833 T-7/51

TS HP E90AN90 Milling Heads with a TS Threaded Adaptation Carrying HELIPLUS HP ANKT 0702.. Inserts

D3

T (1)

Tsi

D

L5

ap

Rd

l

Designation D Z ap D3 L5 Tsi T(1) KgTS HP E90AN-D12-2-T08 12.00 2 7.70 11.50 24.00 T08 10.0 0.00TS HP E90AN-D16-3-T10 16.00 3 7.70 15.20 28.00 T10 13.0 0.01TS HP E90AN-D20-4-T12 20.00 4 7.70 18.50 31.00 T12 16.0 0.01


For inserts: HP ANKT/ANCT 0702..PN-R/PNTR .

Spare PartsDesignation Screw KeyTS HP E90AN SR 34-533/L/HG T-6/51

21

TS FF EWXFast Feed Milling Heads, Carrying Double-Sided Inserts with 6 Cutting Edges

D2D1

Tsi

T (1)

L5ap max

D

17

Rd

l

Designation D1 D Z D2 L5 T(1) Tsi Kg RdTS FF EWX D16-2-T10-04 16.0 8.60 2 15.20 32.00 12.0 T10 0.03 5.0TS FF EWX D20-3-T12-04 20.0 12.60 3 18.50 40.00 15.0 T12 0.06 4.8


For insert: H600 WXCU 04 .

Spare PartsDesignation Screw KeyTS FF EWX SR M2.5X6-T7-60 T-7/51

TS HCMBall Nose Multifunction Milling Heads with TS Threaded Adaptation

D2

Tsi

T (1)

L5r

D

l

Designation D D2 L5 r Tsi T(1)

TS HCM D12/.50-T08 12.00 11.50 28.00 6.00 T08 10.0TS HCM D16/.62-T10 16.00 15.20 38.00 8.00 T10 13.0TS HCM D20/.75-T12 20.00 18.50 48.00 10.00 T12 15.0


For inserts: HBF-QF HBR-QF HCC-QF HCD-QF HCR HTR-QF .

Spare PartsDesignation Screw T-Handle Torx BladeTS HCM D12/.50-T08 SR 34-540 SW6-T BLD T15/S7TS HCM D16/.62-T10 SR 10503579 SW6-T BLD T20/S7TS HCM D20/.75-T12 SR 1052964 SW6-T BLD T25/S7

ISCAR22

TS BCMBall Nose Milling Heads with TS Threaded Adaptation Carrying Tangent Straight Edge Inserts for Semi-Finish Profiling

Tsiapr

D D2

T (1)

L5

Rd

l

Designation D r D2 L5 Tsi Z ap T(1) Kg InsertTS BCM D12-T08 12.00 6.00 11.50 28.00 T08 2 9.60 10.0 0.01 BCR D120TS BCM D16-T10 16.00 8.00 15.20 38.00 T10 2 12.70 13.0 0.02 BCR D160TS BCM D20-T12 20.00 10.00 18.50 48.00 T12 2 17.00 15.0 0.06 BCR D200


For inserts: BCR .

Spare PartsDesignation Screw Key 1TS BCM D12-T08 SR 10503457 T-6/51TS BCM D16-T10 SR 34-505/LHG T-8/53TS BCM D20-T12 SR 34-506/L T-9/51

23

TS HTPSide Plungers with SHANK-MASTER Threaded Connection Carrying Tangentially Clamped Inserts with 4 Cutting Edges

TsiL5

D

ae

ap

D2

T (1)

l

Designation D Z D2 L5 ae ap Tsi T(1) KgTS HTP D17/.67-2-T10-LN06 17.00 2 15.20 30.00 4.5 2.50 T10 13.0 0.03TS HTP D21/.83-3-T12-LN06 21.00 3 19.20 35.00 5.0 2.50 T12 16.0 0.05


For inserts: HTP LN.. 0604 .

Spare PartsDesignation Key ScrewTS HTP T-8/53 SR 14-560-HG

ae

L1

Table 1: Side step as a function of width of plunge

Cutter Diameter (mm)17 21

ae - Width of plunge (mm) L1max - Step (effective diameter)1 8 8.92 10.9 12.33 12.9 14.64 14.4 16.45 15.4 17.8

The relationship between the maximal step L1max and the width of plunge ae is given by the following formula:

L1max = 2x D x (ae-ae2)

D: cutter diameter

ISCAR24

TS S-ASolid Carbide Cylindrial Shanks with Threaded Adaptation, for Interchangeable Milling Heads

d

LL1

D2

Ts

Designation D2 d L1 L Ts Shank(1) KgTS S-A-L70-C12-T08-C 11.50 12.00 20.0 70.00 T08 C 0.25TS S-A-L90-C12-T08-C 11.50 12.00 40.0 90.00 T08 C 0.17TS S-A-L110-C12-T08-C 11.50 12.00 60.0 110.00 T08 C 0.18TS S-A-L90-C16-T10-C 15.20 16.00 40.0 90.00 T10 C 0.25TS S-A-L110-C16-T10-C 15.20 16.00 60.0 110.00 T10 C 0.33TS S-A-L130-C16-T10-C 15.20 16.00 80.0 130.00 T10 C 0.41TS S-A-L100-C20-T12-C 19.20 20.00 50.0 100.00 T12 C 0.40TS S-A-L130-C20-T12-C 19.20 20.00 80.0 130.00 T12 C 0.58TS S-A-L200-C20-T12-C 19.20 20.00 120.0 200.00 T12 C 0.97

(1) C-Cylindrical

TS CABSteel Adapters with Internal Thread on Both Sides, for Connecting MULTI-MASTER Milling Heads

TD2

TsiTypx2T

LA

A-A

A

l

Designation Tsi L D2 T(1) KgTS CAB T08T08-25/1.0-H T08 25.00 11.50 10.0 0.02TS CAB T10T10-35/1.4-H T10 35.00 15.20 13.0 0.04TS CAB T12T12-43/1.7-H T12 43.00 18.30 16.0 0.08


25

www.iscar.com

As part of Iscars ongoing effort to improve its products, it reserves the right to make changes to any of the products appearing in this publication, without prior notice.

Israel Headquarters Tel +972 (0)4 997 0311 www.iscar.com Argentina Tel +54 114 912 2200 www.iscararg.com.ar Australia Tel +61 (0) 2 8848 3500 www.iscar.com.au AustriaTel +43 7252 71200-0 www.iscar.at Belarus Tel +375 17 506 33 31/65 www.iscar.by Belgium Tel +32 (0)2 464 2020 www.iscar.be Bosnia Tel +387 32 201 100 Brazil Tel +55 19 3826 7100www.iscar.com.br Bulgaria Tel +359 431 62557 www.iscar.bg Canada Tel +1 905 829 9000 www.iscar.ca ChileTel +56 2 695 1700 [email protected] China Tel +86 10 6561 0261/2/3 www.iscar.com.cn Colombia Tel +57 (1) 4102800 Croatia Tel +385 (0)1 33 23 301 www.iscar.hr Cyprus Tel +357 (0) 2 336660/5498 Czech Republic Tel +420 377 420 625www.iscar.cz Denmark Tel + 45 70 11 22 44 www.iscar.dk Estonia Tel +372 6775 671 Finland Tel +358-(0)9-439 1420 www.iscar.fi France Tel +33 (0)1 30 12 92 92www.iscar.fr Germany Tel +49 (0)72 43 9908-0 www.iscar.de Greece INTERNATIONAL TOOLS: Tel +30 210 346 0133, VIMA: Tel +30 2310 517-117 / 544-521 Hong Kong Tel +85-2-23054838 Hungary Tel +36 28 887 700 www.iscar.hu India Tel +91 22 67051039/3371 Indonesia Tel. +62-21-29206242/44/45/59 Ireland Tel +353 (0) 1 286 2466 Italy Tel +39 02 93 528 1www.iscaritalia.it Japan Tel +81 6 6835 5471 www.iscar.co.jp Latvia Tel +371 6 733 11 54 Lithuania Tel +370 37 407 230 Macedonia Tel +389 2 309 02 52Mexico Tel +52 (442)214 5505 www.iscar.com.mx The Netherlands Tel +31 (0)182 535523 www.iscar.nl New Zealand Tel +64 9 5731280 www.iscar.co.nz Norway Tel +47 32277750 Philippines Tel +63 2631 1775 Poland Tel +48 32 735 7700 www.iscar.pl Portugal Tel +351 256 579950 www.iscarportugal.pt Romania Tel +40 (0)312 286 614 Russia Moscow Tel +7 495 660 91 25/31 Chelyabinsk Tel +7 351 2450432 www.iscar.ru Serbia Tel +381 11 314 90 38 Singapore Tel +65 6566 7668 Slovakia Tel +421 (0)41 5074301 www.iscar.sk Slovenia Tel +386 1 580 92 30 www.iscar.si South Africa Tel +27 11 997 2700 www.iscar.co.za South Korea Tel +82 53 760 7590 www.iscarkorea.co.kr Spain Tel +34 93 594 6484 www.iscarib.es Sweden Tel +46 (0)18 66 90 60 www.iscar.se Switzerland Tel +41 (0)52 728 0850 www.iscar.ch Taiwan Tel +886 (0)4-24731573 www.iscar.org.tw Thailand Tel +66 (2)7136633-8 www.iscarthailand.com Turkey Tel +90 (262)751 04 84 (Pbx) www.iscar.com.tr Ukraine Tel +38 (044)503-07-08 www.iscar.com.ua United Kingdom Tel +44 (0)121 422 8585 www.iscar.co.uk U.S.A. Tel +1 817 258 3200 www.iscarmetals.com Venezuela Tel +58 2 632 8211/633 4657Vietnam Tel +84 38 123 519/20 www.iscarvn.com

7861815

ISCAR LTD.All rights reserved 08/2013

G

Documents

Multi-master Indexable_low Res