www.jurchen-technology.com

Jurchen Technology GmbH Steigweg 24

97318 Kitzingen

All data may subject to alterations and errors. 2015_0408_EN

The newFirst Solar® FS4 clipis ready for shipment!

Our MK-A HR design results from a close longterm collaboration with distinguished European project installers both for ground-mounts as well as roof-systems. The MK-A 70 HR module clip fits seamlessly to the photovoltaic mounting structure of Jurchen Technology and other commercially available standard solutions. This advanced system design ensures a secure hold of the PV module.

The superior concept of the MK-A 70 HR design brings benefit starting with installation: The laminates can be installed safely due to the ex-tended lower special developed rubber lip (see image „1“). The central connection point (customised for different screws) and the protection bar below (see image „2“) help avoid too high torques during installation. PV system performance is supported by shade-free screw connection.

During he last years the Jurchen Technology MK-A 70 module clip has been installed many million times in photovoltaic arrays throughout Europe. The well-thought-out and patended concept has proven ist strength.

For optimal installation: fast, reliable, secure

Proven millionfold – In operation worldwide under extreme conditions

1

2

1

2

The extended lower special developed EPDM rubber lip guarantees an easy and secure installation.

Practical protection bar to avoid extreme torsional moments..

Key data■ Patented design with an EPDM rubber for a secure

hold of the solar modules

■ Resource conservative and compact design

■ Practical end stop to prevent module damages

■ Highest quality for competitive pricing

■ Optional anti-theft system

■ Certified by First Solar®

Module clip MK-A HR Typ FS4

www.jurchen-technology.com

Bestellhotline: (09369) 98229 - 660

Jurchen Technology GmbH Steigweg 24

97318 Kitzingen

All data may subject to alterations and errors. 2015_0408_EN

TEILELISTEBESCHREIBUNGANZAHLOBJEKT

Modulklemme Profil11EPDM-Gummi22

1A4

Modulklammer MKA 70-9

Status Änderungen Datum Name

Gezeichnet

Kontrolliert

Norm

Datum Name27.10.2010 Karsten Vogt

Allgemein-toleranz DIN ISO2768-m

Diese Zeichnung darf ohneGenehmigung weder vervielfältigt nochdritten Personen oderKonkurrenzfirmen zugänglich gemachtwerden

OberflächenDIN EN ISO1302

M1:1

M1:2

57

20

6,8

The new

First Solar® FS4 Clip

is ready for shipment!

Module clip MK-A HR MK-A HR 80-7Item number: 06006165

MK-A HR 80-9Item number: 06006192

Hole diameter Ø suitable for M6 M8

Available length of the module clip* 80 mm 80mm

Possible module types First Solar® module series FS2, FS3 and FS4 First Solar® module series FS2, FS3 and FS4

Utilizable for the following laminate thickness 6.8 mm (± 0.1 mm) 6.8 mm (± 0.1 mm)

Main casting material Aluminum, weatherproof Aluminum, weatherproof

Insert material EPDM, UV-resistant and weatherproofElectrical resistance > 1x1014 Ohm * cm

EPDM, UV-resistant and weatherproofElectrical resistance > 1x1014 Ohm * cm

Shore hardness 55 Shore A ± 5 in the mounting area 55 Shore A ± 5 in the mounting area

Minimum support area 60 mm 60 mm

Usable as an edge clip without additional compo-nents

Yes Yes

Optional anti-theft system Yes Yes

Customised lengths available subject to request Yes Yes

Technical data MK-A HR Typ FS4

Cross section with dimensions of aMK-A HR M module middle clip:

Installation of a MK-A HR:

The use as a edge clip is possible without additional components.

*Individual length possible accordingly.

Cross section with dimensions of aMK-A HR E module end clip:

18,5

37

6,8

6,8 18