Upload
lythuan
View
217
Download
0
Embed Size (px)
Citation preview
Industrial uses for the solenoid control valve are manyand include accurate control of process water for batching,mixing, washing, blending or other on-off type uses.
Liquid level control can be provided by using a floatswitch or electrode probe which sends an electricalsignal to open or close the valve as needed.
• Fast Acting Solenoid Control• Drip Tight Shut-Off• Simple Design, Proven Reliable• Optional Check Feature• Easy Installation & MaintenanceThe Cla-Val Model 636-03 Solenoid Control Valve is an on-off controlvalve which either opens fully or closes drip-tight upon receiving anelectrical signal to the solenoid pilot control. This valve consists of aHytrol main valve, a three way solenoid and a high capacity three-waypilot valve. The solenoid control operates the three-way valve whichalternately applies pressure to or relieves pressure from thediaphragm chamber of the main valve. It is furnished either normallyopen (de-energize solenoid to open) or normally closed (energizesolenoid to open).If the check feature option is added and a pressure reversal occurs,the downstream pressure is admitted into the main valve coverchamber and the valve closes to prevent return flow.
Schematic Diagram Item Description 1 100-20 Hytrol Main Valve 2 CS3 Solenoid Control 3 102C-3H Three-Way Valve 4 CNA Needle Valve (Closing) Optional Features Item Description A X46 Flow Clean Strainer B CK2 (Isolation Valve) D Check Valves With Isolation Valve F Independent Operating Pressure H Atmospheric Drain P X141 Pressure Gauge S CNA Needle Valve (Opening) V X101 Valve Position Indicator Y X43 "Y" Strainer
Typical Applications
Valves 6" and larger with a "D" check feature must be installedwith the main valve stem in a vertical position
see page 3 forapprovals
SUD
Solenoid Control ValveMODEL 636-03
Model 636-03 (Uses Hytrol Main Valve Model 100-20)
Model 636-03 Dimensions (inches)
Component Standard Material CombinationsBody & Cover Ductile Iron Cast Steel Bronze
Available Sizes 6" - 48"150 - 1200mm
6" - 16"150 - 400mm
6" - 16"150 - 400mm
Disc Retainer &Diaphragm Washer Cast Iron Cast Steel BronzeTrim: Disc Guide, Seat & Cover Bearing
Bronze is StandardStainless Steel is Optional
Disc Buna-N® RubberDiaphragm Nylon Reinforced Buna-N® RubberStem, Nut & Spring Stainless SteelFor material options not listed, consult factory.Cla-Val manufactures valves in more than 50 different alloys.
Materials
Pressure Ratings (Recommended Maximum Pressure - psi)
Valve Body & CoverPressure Class
Flanged
Grade Material ANSIStandards*
150 Class
300 Class
ASTM A536 Ductile Iron B16.42 250 400
ASTM A216-WCB Cast Steel B16.5 285 400
UNS 87850 Bronze B16.24 225 400
Note: * ANSI standards are for flange dimensions only. Flanged valves are available faced but not drilled.Valves for higher pressure are available; consult factory for details
*Consult Factory
Valve Size (Inches)A 150 ANSIAA 300 ANSIB DiameterC MaximumD 150 ANSIDD 300 ANSIE 150 ANSIEE 300 ANSIF 150 ANSIFF 300 ANSIH NPT Body TappingJ NPT Cover Center PlugK NPT Cover TappingStem TravelApprox. Ship Weight (lbs)Approx. X Pilot SystemApprox. Y Pilot SystemApprox. Z Pilot System
821.3822.3815.7515.0010.6911.197.257.756.757.500.750.750.751.70330302020
1026.0027.3820.0017.88CF *CF *CF *CF *8.008.751.001.001.002.30625332222
1230.0031.5023.6221.0017.0017.7513.7514.759.50
10.251.001.001.002.80900362424
1434.2535.7527.4720.88CF *CF *CF *CF *11.0011.501.001.251.003.401250
362626
1635.0036.6228.0025.75CF *CF *CF *CF *
11.7512.751.002.001.004.501380412626
1842.1243.6335.4425.00CF *CF *CF *CF *
15.8815.881.002.001.004.502365
403030
2048.0049.6235.4431.50CF *CF *CF *CF *
14.5616.061.002.001.004.502551
463030
2448.0049.7535.4431.5021.06CF *
15.94CF *
17.0019.001.002.001.006.502733
553030
17.7518.6211.5011.628.889.386.757.255.506.250.750.750.751.10195271818
6 3063.2563.7553.1943.94
19.8822.001.002.001.007.506500
683939
————
3665.0067.0056.0054.75
25.5027.502.002.002.007.508545794042
————
4888.0
90.6266.0059.00
34.0038.502.002.002.008.50
13100864749
————
EE
D
E
InletDD
AA
X
100-20Flanged
F
A
C(MAX)
K
J
H
InletOutlet
FF
B (Diameter)
Y
Z
Model 636-03 Dimensions (mm)
Model 636-03 Metric Dimensions (Uses 100-20 Hytrol Main Valve)
EE
D
E
InletDD
AA
X
100-20Flanged
F
A
C(MAX)
K
J
H
InletOutlet
FF
B (Diameter)
Y
Z
Valve Size (mm)A 150 ANSIAA 300 ANSIB DiameterC MaximumD 150 ANSIDD 300 ANSIE 150 ANSIEE 300 ANSIF 150 ANSIFF 300 ANSIH NPT Body TappingJ NPT Cover Center PlugK NPT Cover TappingStem TravelApprox. Ship Weight (kgs)Approx. X Pilot SystemApprox. Y Pilot SystemApprox. Z Pilot System
1504514732922952262381711841401590.750.750.752889686458458
2005435684003812722841841971711910.750.750.7543
150762508508
250660695508454CF *CF *CF *CF *2032221.001.001.0058
284839559559
3007628006005334324513493682412601.001.001.0071
409915610610
350870908698530CF *CF *CF *CF *2792921.001.251.0086
568915661661
400889930711654CF *CF *CF *CF *2893241.002.001.0086
6271042661661
45010701108900635CF *CF *CF *CF *4034031.002.001.001146811016762762
50012191260900800CF *CF *CF *CF *3704081.002.001.0011411571169762762
60012191263900800535CF *405CF *4324831.002.001.00114
12491397762762
7501607161913511116
5055591.002.001.00165
29511728991991
————
9001651170214221391
6486992.002.002.00191
3876200710161067
————
12002235230216761499
8649782.002.002.002165942218511941245
————
*Consult Factory
Model 100-20 Reduced Port Hytrol Main Valve
Cla-Val fulfills the requirementsdescribed in the American WaterWorks Association’s (AWWA)Standard for Pilot-Operated ControlValves: C530:12
NSF International recognizes Cla-Valas complying with NSF/ANSI 61 andall applicable requirements.
NSF/ANSI 372: National Lead FreeMandate “Reduction of Lead inDrinking Water Act”
Valve & Pilot Approvals
SUD
CLA-VAL 1701 Placentia Ave • Costa Mesa CA 92627 • Phone: 949-722-4800 • Fax: 949-548-5441 • E-mail: [email protected] • www.cla-val.com Copyright Cla-Val 2018 • Printed in USA • Specifications subject to change without notice.© E-636-03 (R-01/2018)
636-03Valve
Selection
100-20 Pattern: Globe (G), Angle (A), End Connections: Flanged (F) Indicate Available Sizes
Inches 6 8 10 12 14 16 18 20 24 30 36 42 48
mm 150 200 250 300 350 400 450 500 600 750 900 1000 1200
Main Valve100-20
Pattern G, A G, A G G G G G G G G G G G
End Detail F F F F F F F F F F F F F
Suggested Flow (gpm)
Maximum 1025 2300 4100 6400 9230 9230 16500 16500 16500 28000 33500 33500 33500
Suggested Flow
(Liters/Sec)Maximum 65 145 258 403 581 581 1040 1040 1040 1764 2115 2115 2115
100-20 Series is the reduced internal port size version of the 100-01 Series.
Temperature Range Water: to 180°F/82°C
Fluids Air, water, light oils
Solenoid Control Body: Brass ASTM B283
Rubber Parts: Buna-N® Synthetic Rubber
Enclosure: NEMA Type 1,2,3,3S,4,4X general purpose watertight* NEMA Type 6,6P,7,9 watertight Explosion Proof available.
Voltages: 110, 220 - 50Hz AC 24, 120, 240, 480 - 60Hz AC 6, 12, 24, 120, 240 - DC Others available at additional cost
Max. operating pressure differential: 200 psi* Coil: Insulation molded Class F Watts AC 6 AC Volt Amps Inrush 30 AC Volt Amps Holding 16 Watts DC 10.6 Manual operator available at additional cost.*Supplied unless otherwise specifiedNote: Flowing Pressure Differential: 5 psi minimum
Pilot System SpecificationsWhen Ordering, Specify 1. Catalog No. 636-03 2. Valve Size 3. Pattern - Globe or Angle 4. Pressure Class 5. Threaded or Flanged 6. Materials Desired 7. Energized or de-energized
to open Main Valve 8. Solenoid Enclosure, Voltage
& Hertz, Coil Insulation, andMax. Operating PressureDifferential
9. Desired Options 10. When Vertically Installed
Valve Options
X141 PressureGauge
X43H Strainer
X101 Valve Position
Indicator