Building Materials 914-636-0505 Phone 1 914-636-8951 Fax Materials Color 8_6_12.pdf · Building Materials 914-636-0505 Phone 3 914-636-8951 Fax Finishing Lime is specially formulated

1Building Materials 914-636-0505 Phone914-636-8951 Fax

www.pearlgreen.com

QUIKRETE COMPANIES

Blacktop Patch

Blacktop Patch - asphalt cold patch for repairing potholes and large cracks in asphalt pavement. Does not require heating or mixing, pour directly out of bag.

Can be formed and compacted. Patched area is ready for immediate use.

QUIKRETE COMPANIES

Mortar Mix

A blend of masonry cement and graded sand. A long lasting, strong bonding mortar. Just add water. 80 lb bag.

QUIKRETE COMPANIES

CementMasonry

QUIKRETE® Masonry Cement complies with current ASTM C91 and Federal Specifications from masonry cement. Available in Type S, Type N, and Type M.

QUIKRETE COMPANIES

Thin-Set

Thin-Set™ Sanded - a blend of portland cement, sand, and chemical additives. Addition of Acrylic Fortifier or Latex is recommended. Available in both gray and white. Apply to acceptable surfaces receiving absorptive, non-absorptive and semi-vitreous Tile. 50 lb.

QUIKRETE COMPANIES

CementPortland

Portland Cement complies with current ASTM C150 and Federal Specifications for portland cement. Can be mixed with aggregate and other ingredients to make concrete mix, mortar mix, and base coat stucco. Available in Type I, Type I/II and Type III.

CementSelf-Leveling

50 lbs/ Level Quik, Pourable, Cement Based, Self Leveling, Floor Underlayment which Mixes with Water Only, No Troweling Necessary, Use Level Quik Concentrated Latex Primer First.

CementWhite

White Cement - 94lbs

QUIKRETE COMPANIES

Marble Chips

Marble Chips, Medium. Use for landscaping around patios, decks, gardens, etc.

Mfg. No. PG No.

1701-60 BLACK

Mfg. No. PG No.

1102-80 MORTAR-M

Mfg. No. PG No.

1125-70 CEM-M

Mfg. No. Color PG No.

1550-50 Grey THINSET-G

1547-50 White THINSET-W

Mfg. No. PG No.

1260-94 CEM

Mfg. No. PG No.

SL150 CEM-SL

Mfg. No. PG No.

TYPE-1 CEM-WH

Mfg. No. PG No.

9906-50 MARBLE

2

www.pearlgreen.com

Pearlgreen CorporationThe Industrial Supply Group

Building Materials

www.pearlgreen.com

THORO CONSUMER PRODUCTS

Waterproof CoatingThoroSeal ®

• Heavy, cement-base powder

• Waterproofs and decorates masonry and concrete

• Comes in dry powder form, mix with Acryl® 60 and water

• Fills and seals pores and voids to correct surface irregularities

• Assures complete protection against water, dampness, and seepage

• Extensive usage - can be applied to interi-ors and exteriors, above or below ground, vertical, overhead, and non-traffic bearing surfaces

• Locks out or holds in water by actually becoming part of the wall when fully cured

• Resistant to mold and mildew

• 50 lb. bag

QUIKRETE COMPANIES

Concrete Mix

Original 4000 psi average compressive strength blend of portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. 80 lb bag.

POR-ROK

Dash Patch

A gysum based powder which, when mixed with water forms a plastic composition that can be troweled onto most surfaces to provide a smoother base for resilient or hard surfaces.

• Designed to have rapid setting, high strength, adhesion and workability

• Will not shrink or expand

QUIKRETE COMPANIES

Gravel

All-Purpose Gravel is a multi-use product for a variety of decorative and landscaping applications. Also for making concrete. Use for:

• Landscaping, Gardening, Patios, Tree Wells, Walks, Rooftops, Fish Ponds and Aquariums

• As a Decorative Extension to Stucco Wallcoating

• Mixing with Portland Cement and All Pur-pose Sand to Make Concrete

Washed Pea Gravel

Washed Pea Gravel - 50 lbs

QUIKRETE COMPANIES

GroutNon-Shrink

Non-Shrink, 10,000 psi General Purpose Grout - non-metallic portland cement based material including expansive additives. Add only water to obtain flowable properties. Non-shrink characteristics make it stable and capable of handling high load transfers. Use for: Grouting of Steel Columns and Precast Concrete. 50 lb. Bag.

GRAND PRIZE

Hydrated Lime

This single-hydrated, white finishing lime is made from high-purity dolomitic limestone, the finest available for use with gauging plasters. Requireing a minimum of 16 hrs. soaking to develop sufficient hydration. GRAND PRIZE

Mfg. No. Color PG No.

T1018 Gray THORO-G

T4002 White THORO-W

Mfg. No. PSI PG No.

1101-80 4000 CONCRETE-M

1007-80 5000 CONCRETE-M5000

Mfg. No. PG No.

02125 DASH

Mfg. No. PG No.

1151-50 GRAVEL

Mfg. No. PSI PG No.

PG No.

GRAVELW

Mfg. No. PG No.

1585-50 GROUT-NS


www.pearlgreen.com

Finishing Lime is specially formulated for compatibility with Gauging Plasters and Keenes Cements. The combination provides the high plasticity, tight bonding and smooth troweling sought by plasteres. Grand Prize Finishing Lime permits a thin finish coat, while the gauging plaster provides initial set and early hardness to minimize shrinkage of lime, for either smooth trowel or textures and float interior finishes. The end result is crack-resistant walls of longlasting beauty with a hard surface to resist abrasion. Complies with ASTM C206. 50 lb. Bag.

USG INTERIORS

Gauging Plaster

Gauging Plaster mixes with lime putty to produce a high-strength, durable, white, smooth trowel finish. Its excellent hardness- and abrasion-resistance make it ideally suited for high-traffic areas and other applications that require durability and abuse resistance.

DAPPlaster of Paris

Dry mix for general wall and ceiling repair. Sets fast in 20 - 30 minutes without shrinking. Smooth formula provides great results every time. Interior use.

Color: White

QUIKRETE COMPANIES

Sand Mix

Sand (Topping) Mix -original high strength blend of portland cement and graded sand. 40 and 80 lb bag. For use:

• Pouring Overlays Less Than 2" Thick

• Patching and Topping Chipped Concrete Surfaces

• Laying Flagstone and Paving Bricks

QUIKRETE COMPANIES

Sand

QUIKRETE® All-Purpose Sand is a washed, properly graded coarse sand with multi-purpose uses. Meets ASTM C 33 specifications. Available in 50 lb. bags. Use for:

• Underlayment for Brick Pavers

• Traction on Snow and Ice

• Mixing with Potting Soil

• Mixing with Portland Cement and Gravel to Make Concrete

Fine Sand

A consistently graded, washed and kiln dried sand used for industrial and construction applications. Use For:

• Underlayment for Patios/Walks

• Epoxy systems & industrial coatings

• Specialized cement mixtures

• Landscaping

• 100 lb. Bag

Play Sand

Play Sand specially graded sand that has been washed, dried and screened. For use in children’s sand boxes.

Mfg. No. Weight (lbs.) PG No.

00706 25 LIME-25

00706 50 LIME-50

Mfg. No. PG No.

02352 PL-50

Mfg. No.Size (lbs.)

Case Pack PG No.

10308 4 6 PL-04

10310 8 4 PL-08

10312 25 1 PL-25

Mfg. No. Size (lb.) PG No.

1103-80 80 SAND-M

1103-40 40 SAND-M40

Mfg. No. PG No.

1152-50 SAND

Type PG No.

O SANDO

OO SANDOO

Mfg. No. PG No.

5015 SANDPL

4

www.pearlgreen.com


Building Materials

www.pearlgreen.com

W.R. GRACE

Fire Protection SpraysMonokote®

Monokote® Fireproofing - the world's most widely specified spray applied cementitious fireproofing. Protecting a building from fire is serious business. That's why Monokote® spray applied cementitious fireproofing is specified by architects and favored by applicators to protect a building's structural steel from failure in the event of fire. Recognized worldwide for their in-place performance and superior durability, Monokote products can be found in all types of buildings including high-rise construction, manufacturing facilities, schools, hospitals and sports facilities. These products provide a formidable last line of defense in the event of fire.

USG INTERIORS

Structo-Lite

Mill-mixed perlite-aggregate gypsum plaster provides a plastic working material that will conform to various designs and help achieve durability in walls and ceilings. Can be applied by hand or machine methods, on gypsum or metal lath, clay tile, concrete or cinder blocks and other approved bases. Mixes with water at the jobsite. Meets ASTM C28. Approximate coverage depends on what plaster is applied over base: Gypsum Lath 140 sq. ft., Metal Lath 89 sq. ft. and Unit Masonry 109 sq. ft.

ARMSTRONG

Ceiling Tile

Acoustical Ceiling Tile, multiple applications

• Color: White, Fissured Square, Lay-In Edge

• Wet -Formed Mineral Fiber

• Finish: Factory Applied Latex Paint

• Economical with good acoustical perfor-mance

• Directional fissured image

• Insulation Value: R factor - 1.5 (BTU units), R factor - 0.26 (watts units)

ARMSTRONG

Ceiling Tile

Acoustical Ceiling Tile. Resistant To Sag, Mold, Mildew and, Bacteria.

• Color: White

• Dimensions: 24 x 24 x 3/4 in.

• Case Quantity: 12

ARMSTRONG

Main Runner

1-1/2 in. x 12 in., White, Main Runner, Fire Rated, New EZ Cut Main Tee, Reduces Install Time andTotally Interchangeable With All System Components.

ARMSTRONG

Cross Tee

White, Cross Tee.

ARMSTRONG

Wall Angle

3/4 in. x 3/4 in. x 10 ft. White, Pre-Punched Wall Molding.

Mfg. No. PG No.

MK-6/HY MONOCOTE

Mfg. No. PG No.

02069 STRUCTO

Mfg. No.

Dimen-sions

(HxLxW in.)

Case Quantity PG No.

755 24x48x⁵⁄₈ 12 CT-755

756 24x24x⁵⁄₈ 16 CT-756

Mfg. No. PG No.

589-A CT-589

Mfg. No. PG No.

7500 CT-MAIN

Mfg. No.Dimensions

(in.) PG No.

ML7520 24 x ¹⁵⁄₁₆ x 1¹⁄₂ CT-TEE-2

ML7540 48 x ¹⁵⁄₁₆ x 1¹⁄₂ CT-TEE-4

Mfg. No. PG No.

7802 CT-WALL


www.pearlgreen.com

ARMSTRONG

Black Iron Channel1 1/2 in. x10 ft. Black Iron Channel.

ARMSTRONG

Rod to Channel ConnectorRod to Channel Connector.

ARMSTRONG

Channel to Main ConnectorChannel to Main Connector.

ARMSTRONG

Pencil Rod1/4 in. x10 ft. Pencil Rod.

KARP ASSOCIATES. INC.Access Door

Universal

The DSC-214M is a distinctly superior door for new installations or for remodeling. The exposed flange adds rigidity to the unit and perfectly conceals the rough wall opening. Flexible anchor straps can be provided for installation within masonry opening

• Specifications:

• Frame shall be 16 gauge steel and door 14 gauge steel

• Trim shall be 3/4 in. wide, one piece con-struction

• Hinge shall be concealed continuous piano hinge

• Locks shall we flush, screwdriver operated with stainless steel can and stud or cylinder lock with dust shutter

• Masonry anchor straps can be included on all frames if specified

• Finish shall be prime coat of rust inhibitive electrostatic powder; baked grey enamel. Stainless steel shall have Number 4 satin polish finish


Drywall

Access doors for drywall installations

The KDW has a textured frame and bead so drywall joint compound can be applied in sufficient thickness to conceal the flange. Prepunched holes in the flange facilities fastening the flange to framing members with drywall screws

Specifications:

• Frame shall be 16 gauge steel and door shall be 14 gauge steel

• Trim shall be galvanized drywall bead

• Hinge shall be concealed continuous piano hinge

• Locks shall be flush and screwdriver oper-ated with stainless steel can and stud or cylinder lock with dust shutter

• Finish shall be prime coat of rust inhibitive electrostatic powder, backed grey enamel.

Mfg. No. PG No.

112BI CT-CHANNEL

Mfg. No. PG No.

4B15LS CT-CON-1

Mfg. No. PG No.

78974X CT-CON-2

Mfg. No. PG No.

14R10 CT-PENCIL

Mfg. No.

Door Size (H x W) (in.)

Number of

Latches PG No.

DSC-214M

6 x 6 1 ACC-06

DSC-214M

8 x 8 1 ACC-08

DSC-214M

10 x 10 1 ACC-10

DSC-214M

12 x 12 1 ACC-12

DSC-214M

12 x 8 1 ACC-128

DSC-214M

14 x 14 2 ACC-14

DSC-214M

16 x 16 2 ACC-16

DSC-214M

16 x 12 2 ACC-1612

DSC-214M

18 x 18 2 ACC-18

DSC-214M

18 x 12 2 ACC-1812

DSC-214M

20 x 16 2 ACC-2016

DSC-214M

22 x 22 4 ACC-22

DSC-214M

24 x 24 5 ACC-24

DSC-214M

24 x 12 2 ACC-2412

DSC-214M

24 x 18 2 ACC-2418

DSC-214M

24 x 20 2 ACC-2420

DSC-214M

30 x 30 5 ACC-30

DSC-214M

30 x 20 5 ACC-3020

DSC-214M

30 x 22 5 ACC-3022

DSC-214M

30 x 24 5 ACC-3024

DSC-214M

36 x 36 5 ACC-36

DSC-214M

36 x 24 5 ACC-3624

DSC-214M

48 x 24 6 ACC-4824

Mfg. No.Door

Size (in.)

Number of

Latches PG No.

KDW 6 x 6 1 ACC-DW06









KDW 36 x 24 5 ACC-DW3624

6

www.pearlgreen.com


Building Materials

www.pearlgreen.com


Fire Rated

The KRP-150FR is flush mounted with anchor straps and mounting holes to facilitate installation

Specifications:

• Frame and trim shall be 16 gauge steel, 1 in. wide

• Door shall be 20 gauge steel, welded pan type filled with 2 in. thick fire rated insula-tion and shall open to 175 deg., be self-latching with automatic closer and interior latch release

• Hinge shall be continuous piano hinge

• Latches shall be bolt type, operated by either ring turn or flush key device, both of which are provided and keyed alike, doors shall be prepared for locks which shall be supplied by others

• Finish shall be prime coat of rust inhibitive electrostatic powder, baked grey enamel. Stainless steel have number 4 satin polish finish

The KRP-150FR is insulated and rated by underwriters laboratories for 1.5 hour “B” label in walls, and may be used in a 2 hour fire rated wall assembly. Additionally, warnock hersey rates the KRP-150FR for 3 hours in ceilings


Plastic

HA plastic panel with removable hinge door

The handi-access plastic door is suitable for all surfaces and can be installed easily by applying glue or caulking adhesive to the back of the frame and pressing into place

Specifications:

• Door and frame shall be constructed from 1/8” high impact styrene plastic

• Door shall have pivot hinge enabling door panel to be hinged or removable

• Door panel shall be held closed with a snap friction catch and opened without special tools

• Finish shall be white lightly textured exposed surface for easy painting or wall-papering

Metal Door Frame

Metal door frames.

CALL FOR SIZING.

Metal Door

Hollow core metal doors.

CALL FOR SIZING.

Wood Door

Hollow core wood doors.

CALL FOR SIZING.

Mfg. No.


Number of

Latches PG No.

KRP-150FR

8 x 8 1 ACC-F08

KRP-150FR

12 x 12 1 ACC-F12

KRP-150FR

14 x 14 1 ACC-F14

KRP-150FR

16 x 16 1 ACC-F16

KRP-150FR

18 x 18 1 ACC-F18

KRP-150FR

22 x 22 1 ACC-F22

KRP-150FR

24 x 24 1 ACC-F24

KRP-150FR

24 x 12 1 ACC-F2412

KRP-150FR

30 x 30 1 ACC-F30

KRP-150FR

32 x 32 1 ACC-F32

KRP-150FR

36 x 36 2 ACC-F36

KRP-150FR

36 x 24 2 ACC-F3624

KRP-150FR

48 x 48 2 ACC-F48

KRP-150FR

48 x 24 2 ACC-F4824

KRP-150FR

48 x 36 2 ACC-F4836

Mfg. No.Door Size (H

x W) (in.) PG No.

HA 8 x 8 ACC-H08

HA 14 x 14 ACC-H14

Mfg. No.


Number of

Latches PG No.


www.pearlgreen.com

Masonite Tempered

Tempered Masonite.

Corex

4x8 ft. Corex. Use to protect walls and floors

Homasote

Homasote is a special-density, structural board made from 100 percent environmental cellulose fiber, a homogeneous composition manufactured with uniformly distributed protection against termites, rot and fungi and resistance to moisture. It also insulates, with twice the R-value of wood.

• Lightweight

• Easy to handle, cut and shape

• Ready to apply directly to framing

• Provides excellent noise attenuation when installed as recommended

• Provides excellent, moisture-resistant ther-mal insulation

Plexiglass

Clear Acrylic Plexiglass sheets. Size: 4 x 8 ft.; PLEX-3A 4x4 ft.

Plywood

4x8 ft. Plywood

PLYWOOD SPECIALTIES

Lumber

Dimensional Lumber

Size (ft.)Thickness

(in.) PG No.

4x8 1/8 MASON-T1

4x8 1/4 MASON-T2

4x4 1/8 MASON-T1A

4x4 1/4 MASON-T2A

Mfg. No. PG No.

CP484W COREX

Mfg. No. PG No.

11005 HOMASOTE

Thickness (in.) PG No.

1/8 PLEX-1

3/16 PLEX-2

1/4 PLEX-3

1/4 PLEX-3A

3/8 PLEX-4

Thickness (in.) Desc. PG No.

1/2 Birch PLY-B2

3/4 Birch PLY-B4

1/4 1-side Finished

PLY-1AC

1/2 1-side Finished

PLY-2AC

5/8 1-side Finished

PLY-3AC

3/4 1-side Finished

PLY-4AC

1/2 2-side Finished

PLY-2AB

3/4 2-side Finished

PLY-4AB

3/8 Rough PLY-1CD

1/2 Rough PLY-2CD

5/8 Rough PLY-3CD

3/4 Rough PLY-4CD

1/2 Fire Rated PLY-F2



1/2 Pressure Treated

PLY-PT2

3/4 Pressure Treated

PLY-PT4

Size(in.) Length (ft.) Desc. PG No.

1x2 8 Fir WOOD-102/08

1x2 10 Fir WOOD-102/10

1x2 12 Fir WOOD-102/12

1x3 8 Fir WOOD-103/08

1x3 10 Fir WOOD-103/10

1x3 12 Fir WOOD-103/12

1x4 8 Pine WOOD-104/08

1x4 10 Pine WOOD-104/10

1x4 12 Pine WOOD-104/12


1x6 10 Pine WOOD-106/10

1x6 12 Pine WOOD-106/12


1x8 10 Pine WOOD-108/10

1x8 12 Pine WOOD-108/12

1x10 8 Pine WOOD-110/08

1x10 10 Pine WOOD-110/10

1x10 12 Pine WOOD-110/12

1x12 8 Pine WOOD-112/08

1x12 10 Pine WOOD-112/10

Thickness (in.) Desc. PG No.

8

www.pearlgreen.com


Building Materials

www.pearlgreen.com

Clamshell Moulding

2-1/4 in. Clamshell molding

AMERICAN WOOD MOLDING

Wood Shims

12 in. Wood Shim, 12/Pack.

Quarter Round Molding

Quarter Round Molding

Sheetrock

4 x 8 ft. Sheetrock

USG INTERIORS

WonderboardDUROCK®

DUROCK® cement board is a water-durable, mold-resistant panel for use under tile and

other finishes in a variety of interior and exterior applications.

Equally suitable for both wood and steel framing applications spaced 16" o.c. in new construction and remodeling, DUROCK cement board is ideal for use in partitions, walls, floors, soffits, countertops, and ceilings in wet or dry areas.

DUROCK cement board is moisture and mold resistant and does not deteriorate, swell, soften, decay, delaminate, or disintegrate in the presence of water, making it the perfect choice for baths, showers, kitchens, and laundry rooms. It is also suitable for exterior applications, including fences, mobile home skirting, agricultural buildings, garage wainscoting, and exterior finishes.

Drywall Corner Bead

1-1/4 in. Outside Drywall Corner Bead

U.S. GYPSUM

Plaster Corner Bead

SHEETROCK Dur-a-Bead corner bead features all-metal, galvanized steel reinforcement that protects external corners. The nose of the bead helps prevent damage from impact and provides a screed for finishing textures.

1x12 12 Pine WOOD-112/12

2x2 8 Fir WOOD-202/08

2x2 10 Fir WOOD-202/10

2x2 12 Fir WOOD-202/12

2x3 8 Fir WOOD-203/08

2x3 10 Fir WOOD-203/10

2x3 12 Fir WOOD-203/12

2x4 8 Fir WOOD-204/08

2x4 10 Fir WOOD-204/10

2x4 12 Fir WOOD-204/12

2x6 8 Fir WOOD-206/08

2x6 10 Fir WOOD-206/10

2x6 12 Fir WOOD-206/12

2x8 8 Fir WOOD-208/08

2x8 10 Fir WOOD/208/10

2x8 12 Fir WOOD-208/12

2x10 8 Fir WOOD-210/08

2x10 10 Fir WOOD-210/10

2x10 12 Fir WOOD-210/12

2x12 8 Fir WOOD-212/08

2x12 10 Fir WOOD-212/10

2x12 12 Fir WOOD-212/12

4x4 8 Fir WOOD-44/08

4x4 10 Fir WOOD-44/10

4x4 12 Fir WOOD-44/12

Mfg. No. PG No.

327 CLAMSHELL

Size(in.) Length (ft.) Desc. PG No.

Mfg. No. PG No.

10002 SHIMS


1/2 QTR-1

3/4 QTR-2

Thick-ness (in.) Desc. Color PG No.

3/8 Regular White SR-1

1/2 Regular White SR-2

5/8 Fire Code White SR-3

1/2 Water-proof

Green SR-W1

5/8 Water-proof

Green SR-W2

5/8 Mold Resistant

Purple SR-Z

Thicknes (in.) PG No.

1/2 WONDERBOARD

5/8 WONDERBOARD-5

Mfg. No. Length (ft.) PG No.

1038OCB 8 CB-SR

1031OCB 10 CB-SR-10


www.pearlgreen.com

The bead installs quickly and easily by crimping or nailing to wood framing through the panels. It is concealed with USG joint compounds, delivering a smooth, finished corner.

“J” Corner Bead

”J” Corner bead

Metal Stud

Metal Stud

CAULKTITE CORP. Metal Track

Metal Track

Galvanized Wire Lath

2 x 8 ft. Galvanized Wire Lath.

U.S. GYPSUM

Joint Compound

62 lb. Pail, Ready Mix, All Purpose, Wallboard Joint Compound, Green Lid

U.S. GYPSUM

Joint CompoundLightweight

4.5 Gallon Pail, Plus 3, Lightweight, Ready Mix, Wallboard Joint Compound, Weighs 35% Less Than Conventional Compounds, Needs One Less Coat Over Metal, Sands With Ease Of Topping, Non-Asbestos, Blue Lid.

DAPJoint Compound

For smooth, high quality finishing of gypsum panel joints. Easy-to-use, ready-mixed formula is applied, has minimal shrinkage and sands easily. Interior use, Color: White. Size: 12 lb, 4/Case

Insulation Blanket

Mfg. No. Length (ft.) PG No.

800 8 CB-PL

800 10 CB-PL-10

Size (ft.) PG No.

8 CB-J

10 CB-J-10

Length (ft.) Size (in.) PG No.

10 2x1⁵⁄₈ STUD-2

8 2x1⁵⁄₈ STUD-28

10 2x2¹⁄₂ STUD-3

8 2x2¹⁄₂ STUD-38

10 2x3⁵⁄₈ STUD-4

8 2x3⁵⁄₈ STUD-48

Size (in.) Length (ft.) PG No.

2x1⁵⁄₈ 10 TRACK-2

2x2¹⁄₂ 10 TRACK-3

2x3⁵⁄₈ 10 TRACK-4

PG No.

LATH

Mfg. No. PG No.

380501 USG-5

Mfg. No. PG No.

380466 USG-5L

Mfg. No. PG No.

10102 USG-1

10

www.pearlgreen.com


Building Materials

www.pearlgreen.com

6 ft. x25 ft. x1 in. Insulation Blanket.

Pegboard

Peg Board, 4 x 8 ft.

LARSEN PRODUCTS CORP.Concrete Bonding

Weld-Crete®

Weld-Crete® bonds new concrete, stucco, tile setting beds and terrazzo to any structurally sound surface, interior or exterior. Use Weld-Crete's® open time to your advantage in bonding to concrete shear walls when you need a time lapse between application of bonding agent, placement of reinforcement steel, placement of formwork and placement of concrete.

LARSEN PRODUCTS CORP.PlasterweldPlaster-Weld®

Plaster-Weld® bonds new plaster to any clean, structurally sound, interior surface. The original chemical plaster Weld-Cretebonding agent is a patented formulation incorporating polyvinyl acetate homopolymer. DESIGNED FOR INTERIOR USE ONLY, the high performance bonding of one-coat finish plaster and/or two and three coat work to concrete ceilings, walls, columns, beams, and other structurally sound surfaces. Plaster-Weld® prepares the surface to allow you to plaster directly to concrete over electric radiant heat cable, and to bond cement mortar beds to smooth concrete for installation of rigid foam insulation. Concrete, brick, block, glass, ceramic tile, wallboard, metals (e.g. sheet lead in x-ray rooms) and marble are suitable sound surfaces, structurally. Plaster-Weld® can be used over paints having oil, rubber or vinyl bases, and over silicone-treated surfaces, as well as latex paints.

QUIKRETE COMPANIES

Acrylic Fortifier

Concrete Acrylic Fortifier - a water-resistant acrylic resin admixture for portland cement-based repair and patching products. Provides increased bond strength when mixed with QUIKRETE® Sand Mix, QUIKRETE® SBC and other QUIKRETE® Repair Products. Use for applications requiring increased bond

strength and improved resistance to water penetration.

Common Brick3-Hole

Common brick, 3-hole, red color.

Common BrickSolid

Common brick, solid, red color

Concrete Brick

Cement/Concrete Brick, solid, gray color.

PG No.

BLANKET-I


1/8 PEG-1

1/4 PEG-2

Mfg. No. PG No.

22000 WELDCRETE

Mfg. No. PG No.

12000 PWELD

Mfg. No. Size (gal.) PG No.

8610-01 1 ACRYLIC-G

8610-05 5 ACRYLIC

PG No.

BRICK-3

PG No.

BRICK

PG No.

BRICK-C


www.pearlgreen.com

Concrete Block

Concrete block, 8 in. High x 16 in. Wide

Rebar

Steel rebar, Length: 10ft.

Rebar Cap

Plastic Rebar Cap.

• Made of engineered high-impact plastic

• 16 Sq Inches top surface area aids in impalement protection

• Fits a range of diameters

• Self-centering formed steel insert seats cover perpendicular to rebar

POR-ROK

Anchor Cement

A non-shrink anchoring cement, mixed with only water, for interior applications. Use for setting anchor bolts and re-bar into concrete.

QUIKRETE COMPANIES

Anchor Cement

Anchoring Cement - a pourable cement that develops strength greater than concrete. Expands as it hardens and sets in 15-45 minutes. Just add water. 5 gal. Use for:

• Setting Bolts, Handrails, or Anything Metal to be Anchored in Concrete

• Ideal for Repairing Loose Wrought Iron Railings

AMSTONE

Driveway Blacktop Sealer

Driveway Blacktop Sealer. 5 gallon.

POR-ROK

Aqua Plug Cement

A quick setting, hydraulic cement used to stop water leakage.

QUIKRETE COMPANIES

Water-Stop Cement

Hydraulic Water-Stop Cement special formula allows product to obtain high strength and rapid setting while repelling water. 5 gal. Use for blocking running water or leaks in cracked masonry or concrete surfaces.


4 BLOCK-4

6 BLOCK-6

8 BLOCK-8

10 BLOCK-10

12 BLOCK-12


3/8 REBAR-1

1/2 REBAR-2

Mfg. No. PG No.

DISC-10 REBAR-CAP-I

Mfg. No. PG No.

48210 M-ANCHOR

Mfg. No. PG No.

1245-50 ANCHOR

Mfg. No. PG No.

566 DRIVEWAY

Mfg. No. PG No.

49110 M-AQUAPLUG

12

www.pearlgreen.com


Building Materials

www.pearlgreen.com

POR-ROK

Concrete Patch

A high-strength, versatile product for concrete repair.

Antihydro Concrete Treatment

Anti-Hydro is a combination of organic and inorganic chemicals that reacts with portland cement to produce more complete hydration. Water requirements, bleed water and shrinkage are reduced. The increased hydration provides internal curing and a much harder cement paste. "Anti-Hydro" increases the early and ultimate strength of concrete. These combined reactions produce impermeable concrete that is hard and non-dusting.

Mortar PanPlastic

29 x 29 x 6 in. Polyethylene Mortar Pan, Heavy Duty Black Polyethylene Construction, Won't Rust Or Dent, Easy To Clean, Contractor Tough.

AMES TRUE TEMPER

Mortar PanSteel

Steel Mortar Pan

• Dimensions: 29.5 x 29.5 x 8 in.

• Capacity: 3 cu ft.

AMES TRUE TEMPER

Mixing BoxSteel

Steel Mixing Box

• Dimensions: 63 x35 x11 in.

• Capacity: 11 cu. ft.Mfg. No. PG No.

1126-60 WATERSTOP

Mfg. No. PG No.

51010 M-PATCH

PG No.

ANTIHYDRO

Mfg. No. PG No.

MP3007 MORTARPAN-P

Mfg. No. PG No.

1MP MORTARPAN

Mfg. No. PG No.

40MB MORTARPAN-11

Documents

Building Materials 914-636-0505 Phone 1 914-636-8951 Fax Materials Color 8_6_12.pdf · Building Materials 914-636-0505 Phone 3 914-636-8951 Fax Finishing Lime is specially formulated