Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Autologic 2016
MINI Pass-Thru
Disclaimer – This information is provided as a guide only and subject to change by the vehicle
manufacturer. Autologic cannot be held responsible for any errors regarding manufacturer information
that leads to diagnosis or programming malfunctions. This document is regularly updated so please check
for latest version. E&OE.
2016 Autologic Diagnostics Limited BMW Pass-Thru2
An OSS account registration is required before you will be allowed any access to
BMW MINI programming.
To register for an account visit: https://oss.bmw.de/index.jsp
Registration on OSS (Online Service System)
2016 Autologic Diagnostics Limited BMW Pass-Thru3
1. To start the registration process select ‘Registration’ (1) on the home page
2. Complete the required information
3. Read and then accept the Terms and Conditions (2)
4. Select ‘Send’ (3)
Registration on OSS (Online Service System)
1
2
3
2016 Autologic Diagnostics Limited BMW Pass-Thru4
4. You will receive an email with your customer number (1) and
activation link (2).
5. Click on the ‘Activation link.’ Log in via the Activation link is required
for the first time to activate the account. Afterwards you can log in
via OSS website.
6. On account activation, you will be directed to the ‘Company
account’ page where credit card details are set up and credit is
purchased.
7. On this page you can also view your credit balance status.
Registration on OSS (Online Service System)
1
2
2016 Autologic Diagnostics Limited BMW Pass-Thru5
The ISTA/P programming system application stands for Integrated Service Technical Application/Programming.
ISTA/P is used to process all coding, programing and to enable dependent control modules in BMW Group vehicles.
Hardware technical requirements:
At least 4 GB of main memory
CPU better than Pentium IV © with a minimum clock frequency of 2 GHz
At least 160 GB of free hard drive space
At least a 15" monitor, 1366 x 768 pixel resolution, 256 colours
Network connection to connect to the internet
Pass-Thru Device (PTD), which must be SAE-J2534-compatible (e.g. manufacturers: Drew Technologies).
You will need the proprietary PTD driver from the manufacturer, installed according to the OSS user guide.
Microsoft Windows 7 Professional/Enterprise © (32-bit) with service pack 1 or
Microsoft Windows 7 Professional/Enterprise © (64-bit) with service pack 1 or
Microsoft Windows 8.1 Professional/Enterprise © (64-bit)
Before purchasing a PTD we recommend checking with Assist Pass-Thru Support as there are some PTDs that are not compatible with
Windows 7 Professional.
Integrated Service Technical Application Programming (ISTA/P)
2016 Autologic Diagnostics Limited BMW Pass-Thru6
1. To install ISTA/P, log in in the normal manner.
2. Select ‘programming’ (1)
3. Download and install the highlighted files:
OMS installation file
MINI PTD driver
Integrated Service Technical Application Programming (ISTA/P)
1
2016 Autologic Diagnostics Limited BMW Pass-Thru7
4. Start the OMS installation process
Integrated Service Technical Application Programming (ISTA/P)
1 2
2016 Autologic Diagnostics Limited BMW Pass-Thru8
Integrated Service Technical Application Programming (ISTA/P)
4
56
3
2016 Autologic Diagnostics Limited BMW Pass-Thru9
5. The latest Java version is required to complete installation
6. If prompted that java is out of date, update will be required https://java.com/en/download/
7. Once the installer is completed, press ‘Finish’
Integrated Service Technical Application Programming (ISTA/P)
2016 Autologic Diagnostics Limited BMW Pass-Thru10
8. Start the MINI PTD installer
Integrated Service Technical Application Programming (ISTA/P)
1 2
34
2016 Autologic Diagnostics Limited BMW Pass-Thru11
Integrated Service Technical Application Programming (ISTA/P)
5 6
8 7
2016 Autologic Diagnostics Limited BMW Pass-Thru12
Integrated Service Technical Application Programming (ISTA/P)
9 10
11
2016 Autologic Diagnostics Limited BMW Pass-Thru13
8. ISTA/P Online can now be started once the necessary software has
been successfully installed.
9. To do so, proceed as follows:
a) Start the BMW MINI Online Service System portal (OSS portal)
b) Log in with your user name and password
c) Select ‘Purchase Ticket’ (1)
d) Select desired access period i.e. Hours, Days, Weeks, Months,
Year (2)
e) Select ‘Load time account’ (3)
f) Select ‘Programming’ (4)
Launching ISTA/P Online
4
1
2
3
2016 Autologic Diagnostics Limited BMW Pass-Thru14
g) The status box will change to green
h) Select ‘Start’.
i) This will launch the ISTA/P program
j) During starting, several ISTA/P Online programs are blocked
by the Windows firewall security.
k) To run ISTA/P Online, select ‘Allow Access’ for all of the
programs.
Note: These programs are required during vehicle
programming. They communicate during vehicle programming
via local network ports. If you change these, the Windows
security warnings are repeated. To correct this, select ‘Allow
Access’ again.
Launching ISTA/P Online
2016 Autologic Diagnostics Limited BMW Pass-Thru15
Thank you for using this Autologic Pass-Thru guide.
We hope that you found it useful.
If you have any further issues, please contact our
Pass-Thru Support Team.