MINERAL GREEN TERRAMESH®

Ufficio Tecnico OMI2018

Mineral Green Terramesh®

TERRAMESH® VERDE MINERALE2

Terramesh® Verde Minerale 65° – 70° – 80° – 90° inclinazione

Il Terramesh® VerdeMinerale è un Sistemamodulare conparamento in pietra perle terre rinforzate .

TERRAMESH® VERDE MINERALE2

É stato costruito per la primavolta in Belgio, Via Brugge, nel2013, per una (falsa) spalla diponte.Permette un rivestimento inpietra inclinata continuasenza i passaggi tipici delsistema Terramesh.

Terramesh® Verde Minerale 70° – 80° – 87° inclinazione

TERRAMESH® VERDE MINERALE2

Terramesh® Verde Minerale

Terramesh System

3 TERRAMESH® VERDE MINERALE

Vantaggi principali

Pietrame di diametroinferiore rispetto al tms

Facile da installare

Miglior rapportocosti/benefici

Flessibile + Modulare

TERRAMESH® VERDE MINERALE3

Mineral Green Terramesh®

70° – 80° - 87° face inclination α

Inclinazione standard 80°

Il Terramesh Verde Minerale è marcato CE

TERRAMESH® VERDE MINERALE3

Mineral Green Terramesh®

70° – 80° - 87°face inclination α

Gli elementi sono realizzati con rete DT in maglia 8x10, rivestita Polimac, pannello in

rete elttrosaldata zincate, 2 staffe zincate e 7 tiranti zincati da installare in sito

WELDED PANEL FOR MINERAL GTM3

99 mm x 30 meshes = 2970 mm

50 mm x 59 meshes = 2950 mm

PANNELLO ELETTROSALDATO 3

PANNELLO ESTERNO

BRACKETS AND TIES3

INSTALLATION DETAILS4

AA = RETE DT BB = barrette

CC = GeotessileDD = barrette

EE = tirantiFF = Riempimento

Strutturale GG = Punti SpenaxHH = riempimento

in pietrame

The folded units shall be taken out from the bundle and placed on a hard flat surface.Units shall be opened, unfolded and pressed out to their original shape.

Il pannello frontale va sollevato e portato nella posizione finale e agganciato con le staffe e I tiranti. Il geotessile è impiegato per separare il pietrame dal terreno

Stone and soil fillingPlacing of a new unit

L = LONG

70° facing inclination

S = SHORT

TIE POSITIONING4

Each unit having a width of 3m is provided with 2 steel triangular brackets (loose) and 7 steel ties (4 shorts + 3 long) whose function is to assure the required facing inclination.

650

80° facing inclination

650

87° facing inclination

70° / 80° INCLINATION TIE POSITIONING4

zinc coated welded mesh panel 50x50 mm Φ5

zinc coated welded mesh panel 99x100 mm Φ6

2970

2950

L = LONG S = SHORT

87° INCLINATION TIE POSITIONING4

L = LONG S = SHORT

zinc coated welded mesh panel 50x100 mm Φ5

2,95 m x 0,65 m

TIE POSITIONING4

Pannello in rete elettrosaldata zincata

50x50 mm Φ5

INSTALLATION OF THE STONES ON THE FACING4

The front face is filled with approximately 60 cm of granular materialAfter the rock has been placed and before the structural backfill compaction, a geotextile shall be placed at the facing

Place the structural backfill in approximately 200 mm lifts and compact it to the required level.

The required stones for each Mineral Green Terramesh unit is 0,5 cubic meter for each squared meter of facing.

The required geotextile for Mineral GTM unit is 2,5 squared meter for each squared meter of facing

Compaction shall be performed to 95% of Standard Proctor, by use of conventional compaction equipment. Chiusura unità e livello

AFTER STONES INSTALLATION4

Belgium, Via Brugge

AFTER STONES INSTALLATION4

Belgium, Via Brugge

INSTALLATION PRODUCTIVITY4

Senza rilevato, considerando scarico, stoccaggio e posa elementi

Con pietrame e rilevato compattato

Mineral Green Terramesh®

Belgium, Via Brugge, Bridge Abutment

Mineral Green Terramesh®

Belgium, Via Brugge, Bridge Abutment

Mineral Green Terramesh®

Belgium, Via Brugge, Bridge Abutment

Mineral Green Terramesh®

Germany, Oberstdorf, Ski Jump

Mineral Green Terramesh®

Germany, Oberstdorf, Ski Jump

Mineral Green Terramesh®

Germany, Oberstdorf, Ski Jump

Mineral Green Terramesh®

France, Montagnac, Arch Culvert

Mineral Green Terramesh®

France, Montagnac, Arch Culvert

Mineral Green Terramesh®

Romania, Embankment & Bridge Abutment