108

Click here to load reader

Midwest 22 2015

Embed Size (px)

DESCRIPTION

Midwest 22 2015

Citation preview

Page 1: Midwest 22 2015

$3.00

4

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

®

MMiiddwweessttEEddiittiioonn

Yet one more phase of the nation’s largest airport construction project was finished earlier thismonth with the commissioning of Runway 10R-28 L and the new South Air Traffic Control Tower atO’Hare International Airport.

One More PhaseTakes Off at O’HareInternational Airport

MADISON, Wis. (AP) Wisconsin transporta-tion officials are pushing back completion datesfor five major road projects because the statebudget didn’t lay out enough money for them. The projects will be delayed for at least two

years — and possibly longer — if legislators can’tcome up with ways to find new revenue going for-ward, the Milwaukee Journal Sentinel reportedSept. 20. The delays will cause the projects’ coststo increase because of inflation, though the stateDepartment of Transportation hasn’t said by howmuch. Gov. Scott Walker proposed borrowing a record

$1.3 billion for roads in his executive state budgetproposal. But his fellow Republicans in the

Legislature said that was too much and scaled theborrowing back to $500 million. The GOP gave DOT the ability to request an

additional $350 million from the Legislature’spowerful Joint Finance Committee. The agencyhasn’t asked for the additional borrowing authori-ty, and Senate Republicans say they’re reluctant togrant the request if it comes. The DOT identified the five projects for delays

because they weren’t slated to be completed in the2015-17 biennium, DOT spokeswoman PegSchmitt said in an email to The Associated Press.She said the agency anticipates asking for someadditional borrowing authority “at some point,’’

Wis. Delays Work on Major Jobs

Nearly 200 GuestsAttend Nortrax Demo…12

Roland Machinery HostsAppreciation Night…20

Golfers Raise $10K forPolitical Action…18

Inside

The number of unemployedworkers with construction experi-ence dropped to the lowest total forSeptember since 2000, as hiringcontinued to slow despite robust

demand for construction, accord-ing to an analysis by the AssociatedGeneral Contractors of America.Association officials cautioned thatthe hiring slowdown most likely

reflects a lack of available workersthat could lead to project delaysunless more students and workersjoin the construction sector.“Growth in the construction

workforce has been slowingthroughout 2015, just at the timethat construction spending hasaccelerated to a multi-year high,”

Unemployment Falls to Lowest Mark in 15 Years

October 24, 2015 • Vol. IXX • No.22 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

www.constructionequipmentguide.com

Published Nationally

see JOBS page 105

see WISCONSIN page 68see O’HARE page 105

By Lori TobiasCEG CORRESPONDENT

Yet one more phase of the nation’slargest airport construction project wasfinished earlier this month with thecommissioning of Runway 10R-28 Land the new South Air Traffic ControlTower at O’Hare International Airport.It’s all part of the O’HareModernization Program, an $8.7 bil-lion plan that’s been in the works sinceit was announced in 2001.Runway 10R-28L runs east to west

and is located on the south airfield. Itwill be used primarily as an arrivalrunway and will substantially improveO’Hare’s capacity and efficiency,according to a press release from theChicago Department of Aviation.“When we invest in O’Hare’s

future, we are helping Chicago contin-ue to grow economically and competeon a global scale,” said ChicagoMayor Rahm Emanuel. “The new run-way will reduce delays and increaseairport capacity — a positive develop-ment for travelers and businesses whorely on O’Hare. And while O’Haremay be the busiest airport in the world,our goal is to make it the best airport inthe world. With the help of this newrunway and our other investments, weare on track to achieving that goal.”The $516 million runway was built

through the execution of several con-struction contracts, including maincontracts for east utilities and the guardpost, site preparation, paving and elec-tric and navigation aids and fiber optictransmission systems. Each thesewere design/bid/build projects withpre-established completion milestonesand associated liquidated damages,said Karen Price, public informationofficer of the city of Chicago.

Table of Contents ................4

Snow & Ice Section ......45-49

Crawler Loaders, Dozers,Undercarriages & PartsSection ..........................57-66

Paving Section..............79-93

Auction Section..........98-105

Business Calendar ..........104

Advertisers Index ............106

Page 2: Midwest 22 2015

Page 2 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

2006 Cat 257B . . . . . . . . . . . $21,500s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC

Cab Heat, Hyd QC2,035 Hrs Cab Heat, Hyd

Used Equipment: Jeff Speer or Wes Ensrud Used Work Tools & Attachments: John Riechers 11200 W. Silver Spring Rd., Milwaukee, WI 53225

www.fabickcat.comHundreds of machines. Listings updated daily.

PROVIDING THE BEST IN

USED EQUIPMENT

Wisconsin & Upper Michigan Operations

800.353.1944 ... For Used Equipment

877.754.4477 .... For Used Work Tools & Attachments

414.461.9100 ...In WI and Upper Michigan

Wisconsin & Upper Michigan Operations

2012 Cat 242B3 ....................................$27,900S/N SRS01747, EROPS, 2 Speed,

Aux Hyd, 668 Hrs

2006 Cat 735 ........................................$199,000S/N B1N00486, 3,769 Hrs, EROPS, A/C,

tailgate, tires good 26.5 X 25

1999 Cat 951 ..........................................$12,000S/N 86J02337, undercarriage fair, bucket,

OROPS, hrs unknown

2006 Kobelco SK480 ............................$59,500S/N YS06U0571, 9187 Hrs, EROPS, Long Stick,

Bucket, Undercarriage Fair

2006 Cat 966H ....................................$140,000S/N A6G00225, 8535 Hrs, EROPS, A/C, GP-bkt,

tires good, engine rebuilt at 7422 hours

2010 John Deere 670G ..........................CALLS/N 628277, 4283 Hrs,

EROPS, Snow Wing, Tires Good

1985 CAT 140G ......................................$54,000S/N 72V08774, EROPS, TIRES BALLOON,

BLADE LINKAGE GOOD

2011 CAT TL642 ....................................$56,500S/N TBK01179, CAB W/AC, 1500 HOURS

2012 CAT TL1055 ..................................$88,000S/N TBM01503, CAB W/AC, STABILIZERS,

50' FORK

1999 Cat D6M LGP ..............................$51,750S/N 2RN00542, 10,370 Hrs, EROPS, PAT blade, winch, rear screen, under carriage good

2011 Cat 908H ......................................$69,500S/N LMD01541, EROPS, Bucket and Forks

Included, Tires Good, Q Cplr

2007 Hitachi ZX120 ..............................$64,500S/N 071467, 5116 Hrs, EROPS, AC, Bucket,

UC good, Hyd Thumb

2012 Cat 262C2......................................$32,500S/N TMW00469, 2847 Hrs, EROPS, AC, CaseControl, 2 Speed, 2 Tires Good 2 Tires Poor

2005 JD 624J ........................................$67,500S/N 595206, 13,856 Hrs, EROPS, Bucket

2005 Bomag 135AD ..............................$15,500S/N 101650121687, 6185 Hrs, OROPS,

Double Drum, Asphalt Roller

2003 Cat 320CL......................................$59,500S/N PAB00858, 10,578 Hrs, EROPS,

Q Cplr, Aux Hyd

Page 3: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 3

Page 4: Midwest 22 2015

Page 4 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Contents Copyrighted ©2015, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings,letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are sub-ject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not nec-essarily reflect the policy or opinions of this publication.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsi-ble for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertise-ments are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally andevery effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

specIal secTIon

57 CRAWLER LOADERS, DOZERS, UNDERCARRIAGES & PARTSBe sure to check out this special section! Keep up to date with the latest information on crawler loaders, dozers, undercarriages and parts.

feaTures

12 NEARLY 200 CUSTOMERS, GUESTS ATTEND LIVE EQUIPMENT DEMO

Nearly 200 customers and guests attended the live equipment demonstration heldon Oct. 7 at the Crandon International Off Road Raceway in Crandon, Wis.

14 HALL INDUSTRIAL COMPANY/MIDWEST MINEHOSTS EVENT

Hall Industrial Company/Midwest Mine Services recently hosted approximately400 guests at the company’s customer appreciation event held at the Sunrise Park& Banquet in Millbury, Ohio.

18 GOLFERS RAISE MORE THAN $10K FOR IAAP POLITICAL COMMITTEE

A beautiful day welcomed 184 golfers to the Sept. 28 golf outing held at PantherCreek Country Club and Piper Glen Golf Club in Springfield, Ill. Due to the strongsupport of everyone attending, this outing raised $10,920 for the IAAP PoliticalAction Committee.

20 ROLAND MACHINERY HOSTS CUSTOMERAPPRECIATION NIGHT

Roland Machinery Company held a customer appreciation night on Oct. 16 at thecompany’s main office in Springfield, Ill. The company served a BBQ dinner withall the fixings and gave away door prizes. Customers had the chance to test theirskills by playing excavator basketball.

24 PROGRAM TEACHES YOUNG ADULTS INDUSTRY,FIGHTS BLIGHT

A group of young adults is learning about the construction trade and helpingDetroit in its battle against neighborhood blight by boarding up vacant schoolsacross the city.

24 SOUTHEASTERN EQUIPMENT CO. INC. HIRES ANDY GRAY

Southeastern Equipment Co. Inc. announced that Andy Gray has joined the company as sales representative of the Monroe, Ohio, branch. His primary responsibility is selling the equipment lines that the branch represents, whichinclude Case, Kobelco, Kubota and Gradall.

24 JCB GOVERNMENT DEFENSE DIVISION RELOCATESTO SAVANNAH

JCB recently relocated its global government and defense division from its worldwide headquarters in the United Kingdom to its North American headquartersin Savannah, Ga. This strategic move comes on the heels of JCB’s success manufacturingthe high mobility engineer excavator (HMEE) for the U.S. Army.

34 LOOS RETIRES FROM OAIMA AFTER DECADES OF SERVICE

The Ohio Aggregates & Industrial Minerals Association (OAIMA) held a surpriseretirement party for long time Executive Assistant, Maralynn Loos after the association’s recent Board Meeting. Loos has been with the association since the1960s and has worked with five executive directors and 34 association presidents.

40 WACKER NEUSON UNVEILS NEW PRODUCTS ATPRESS CONFERENCE

On Oct. 14, U.S. and Canadian trade media attended a press conference at theNorth American headquarters of Wacker Neuson Corporation located inMenomonee Falls, Wis., near Milwaukee.

68 JCB BACKHOE LOADER TO HELP CLINTON FOUNDATION INITIATIVE IN EAST AFRICA

A JCB 3DX backhoe will soon be in service in Iringa, Tanzania, as part of theClinton Foundation’s agricultural development initiative for smallholder farmers inEast Africa.

equIpMenT

45 SCHUYLER 911SP Snow Blades

45 VIRNIG MANUFACTURING Pin-On Wing Option

80 ATLAS COPCO Dynapac CT3000 Tamping Compactor

84 VOGELE MT 3000-2i Material Transfer Vehicle

DeparTMenTs

96 CLASSIFIEDS

100 COMING AUCTIONS

104 BUSINESS CALENDAR

MIDWesT eDITIonCirculated Throughout • North & South Dakota • Nebraska

• Kansas • Minnesota • Iowa • Missouri• Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

Founder, Publisher & CEO Edwin M. McKeon Sr.Midwest Publisher Joseph S. McKeon

Editor In Chief Craig Mongeau Associate Editor Christine Allen

Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton

Controller Tom WeinmannCirculation Mgr. Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900

Toll Free 800/523-2200 Fax 215/885-2910

Web site www.constructionequipmentguide.comEditorial e-mail [email protected]

Advertising e-mail [email protected]

For advertising rates Contact Joseph S. McKeon• Illinois • Wisconsin • Northwest Indiana• Missouri • Kansas

773/769-4090Toll Free 800/632-0233

Fax 773/769-4280e-mail [email protected]

Kent HogeboomNational Sales Manager

315/866-1423Toll Free 800/988-1203

Fax 315/866-1379e-mail [email protected]

Contact Ed Bryden• Central and Eastern Indiana • Michigan • Ohio • Kentucky

440/243-9690Toll Free 800/810-7640

Fax 440/243-9691e-mail [email protected]

Contact Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

952/353-1770Toll Free 866/413-4265

Fax 952/353-2750e-mail [email protected]

Mobile LinkedIn Facebook Twitter YouTube

To r ead t he s e s t o r i e s a nd many mo re , v is i t w w w . co n s t r u ct io nequipment guid e . com

In ThIs Issue

1412

18

®

Page 5: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 5

Komatsu D51EX-22, ’08, 2,410 hrs........$112,500Komatsu D51PX-22, ’07, 5,510 hrs ......$114,500Komatsu D51PX-22, ’08, 4,247 hrs ......$114,500Komatsu D61EX-12, ’02, 4,940 hrs..........$53,399Komatsu D61PX-15EO, ‘07, 4,771 hrs ....$95,000Komatsu D61PX-23, ’13, 1,529 hrs ......$216,599Komatsu D65EX-15, ’06, 2,301 hrs........$144,500Komatsu D65EX-15EO, ’07, 3,934 hrs ..$149,500Komatsu D65PX-15EO, ‘07, 4,704 hrs ..$149,500Komatsu D65WX-15EO, ’07, 3,959 hrs..$157,000Komatsu D155AX-6, ’11, 3,694 hrs ......$265,000Komatsu D275AX-5, ’03, 23,015 hrs ......$99,500

Deere 759J, ’14, 1,186 hrs ....................$435,000Komatsu 911.4, ’11, 4,323 hrs ..............$370,000Komatsu 911.4, ’10, 5,148 hrs ..............$370,000Komatsu 911.4, ’10, 7,620 hrs ..............$295,000Norco Puma 220, ’11, 78 hrs ....................$CALLPonsse Ergo Harvester, ‘05, 13,239 hrs ................................................................................$160,499Timbco 415EX Track Harvester, ’07, 11,870 hrs....................................................................$169,299Valmet 415EX/Rolly II, ’05, 10,092 hrs $124,500Valmet 840.3 6WD, ‘08, 11,829 hrs ......$159,900

Cat 365CL-MH, ‘08, 10,428 hrs ............$137,500Gehl RS8-42, ’03, 3,594 hrs ....................$37,500Komatsu P400LC-8MH, ’08, 6,095 hrs ..$219,500

Komatsu HD465-7, ’06, 18,843..............$219,500

Wirtgen W60, ’08, 628 hrs ....................$144,900Wirtgen W120F, ’09, 3,100 hrs ..............$225,799Wirtgen W600, ’03, 2,403 hrs..................$59,500Wirtgen W2100, ’04, 8,538 hrs..............$209,500

Bomag BC61RB, ’00, 15,862 hrs ............$49,900Bomag BC1172RB, ’05, 15,531 hrs ........$89,900Bomag BW205AD, ’02, 3,520 hrs ............$21,500Hamm HD14VV, ’09, 0 hrs on engine ......$25,799Hamm HD120HV, ‘03, 2,690 hrs ..............$32,999Stone WP4100 Double Drum, ‘09, 1,018 hrs ..........................................................................$14,599Volvo DD24 Roller, ’11, 1,032 hrs………$28,499

Deere 9560R, ’12, 2,000 hrs..................$333,000

Leeboy 8500T, ’06, 5,859 hrs ..................$25,799Leeboy 8500T, ‘06, 3,822 hrs ..................$24,699Leeboy 1000D, 1,475 hrs ........................$20,499Mauldin 1750C, ’98, 3,618 hrs ................$19,799

Komatsu HM300-2, ’07, 6,500 gal ........$299,499Komatsu HM300-2, ’07, 6,500 gal ........$299,499

Cat 950H, ’06, 15,188 hrs ........................$69,500Deere 544K, ’13, 792 hrs ......................$159,000Deere 544K, ’13, 1,023 hrs....................$159,000Deere 624K, ’13, 948 hrs ......................$166,000Deere 624K, ’13, 905 hrs ......................$166,000Komatsu WA200-6, ’09, 3,613 hrs ..........$88,499Komatsu WA200PZ-6, ’14, 385 hrs........$115,000Komatsu WA250-6, ’11, 5,646 hrs ..........$94,500Komatsu WA250PT-5L, ‘05, 9,080 hrs ....$55,299Komatsu WA250PT-5L, ’06, 10,576 hrs ..$47,999Komatsu WA270-7, ’15, 97 hrs..............$152,399Komatsu WA270-7, ’15, 137.5 hrs ........$152,399Komatsu WA320-7, ’13, 462 hrs............$174,500Komatsu WA320-7, ’14, 81 hrs..............$165,000Komatsu WA380-6, ’11, 2,094 hrs ........$179,500Komatsu WA380-7, ’13, 1,385 hrs ........$185,000Komatsu WA400-5L, ’05, 10,968 hrs ......$72,999Komatsu WA450-3, ’99, 10,754 hrs ........$64,499Komatsu WA450-6, ’07, 8,069 hrs ..........$99.599Komatsu WA500-6, ‘09, 9,628 hrs ........$207,299Komatsu WA500-6, ’09, 8,621 hrs ........$211,399Komatsu WA500-6, ’10, 7,378 hrs ........$225,499Terex TL300-2, ’08, 2,441 hrs..................$69,500

Kleemann MSD190D Screen, ’13, 688 hrs ............................................................................$255,000Kleemann MC110Z Crusher, ’13, 714 hrs..............................................................................$475,000Metso LT 1415, ‘06, 7,401 hrs....................$CALL

Case 450CT, ’07, 2,942 hrs ......................$23,499

Atlas Copco MB1200 Hydraulic Hammer, ’05,Rebuilt & Painted......................................$21,799Case CX135SR, ‘11, 2,350 hrs ..............$104,500Case CX160, ‘05, 6,579 hrs ....................$45,599Cat314C CR, ’02, 5,627 hrs......................$54,499Cat 330CL, ’02, 12,032 hrs ......................$59,500Cat M318, ‘96, 6,440 hrs ........................$39,500Deere 225C LC, ’04, 7,029 hrs ................$62,667Deere 350DLC, ’07, 5,837 hrs ..............$109,500Deere 350DLC, ’07, 6,832 hrs ..............$109,500Kobelco SK220LC, ’96, 9,972 hrs ............$28,399Kobelco SK330LC, ’03, 11,889 hrs ..........$37,333Kobelco SK485-9, ‘12, 3844 hrs ............$184,599Komatsu PC138USLC-8, ’11, 1,142 hrs $124,500Komatsu PC138USLC-8, ’11, 3,218 hrs $104,500Komatsu PC138USLC-8, ’14, 9.2 hrs ....$135,000Komatsu PC160LC-7, ’05, 8,230 hrs........$54,500Komatsu PC160LC-7, ’05, 5,926 hrs........$78,599Komatsu PC200LC-7, ’02, 7,395 hrs........$79,500Komatsu PC200LC-7, ‘03, 8,114 hrs........$79,500Komatsu PC200LC-7, ’03, 7,248 hrs........$59,500Komatsu PC200LC-7, ’04, 7,640 Hrs ......$89,500Komatsu PC210LC-10, ’14, 978 hrs ......$197,280Komatsu PC220LC-6, ‘98, 19,095 hrs......$37,100Komatsu PC220LC-8, ’06, 9,084 hrs........$96,500Komatsu PC220LC-8, ’07, 5,757 hrs......$119,500Komatsu PC220LC-8, ’09, 4,707 hrs......$129,000Komatsu PC228USLC-1, ’99, 4,400 hrs ..$54,500Komatsu PC300LC-7, ’06, 6,261 hrs......$102,499Komatsu PC300LC-7 w/Shear, ‘06, 7,463 hrs ......................................................................$265,000Komatsu PC300LC-7EO, ’06, 7,736 hrs $110,000Komatsu PC300LC-7EO, ’07, 4,714 hrs $157,500Komatsu PC300LC-8, ’09, 4,686 hrs......$121,299Komatsu PC360LC-10, ’12, 1,148 hrs....$264,500Komatsu PC400LC-7, ’06, 10,541 hrs......$76,500Komatsu PC400LC-7EO, ’07, 10,905 hrs $92,500Komatsu PC400LC-7EO, ‘07, 10,448 hrs $99,500Komatsu PC490LC-10, ‘12, 3,136 hrs....$265,000Komatsu PC490LC-10LR, ‘10, 4,720 hrs$289,500Komatsu PC600LC-7, ’05, 10,328 hrs....$199,500Komatsu PC600LC-7, ’05, 5,482 hrs......$253,500Komatsu PC600LC-8, ’06, 10,478 hrs....$199,500Komatsu PC650LC-3, ’89, 20,397 hrs......$42,500Komatsu PC750LC-7, ’04, 6,613 hrs......$349,500Volvo EC220DL, ’13, 2,151 hrs ..............$134,500

DOZERS WHEEL LOADERS

EXCAVATORS

COMPACTION

MILLING

FORESTRY

MATERIAL HANDLERSCRUSHING/SCREENING

SCRAPERS

PAVING

WATER EQUIPMENT

SKID STEEROFF HIGHWAY TRUCKS

15 Roland Branch Locations in IL, IN, MI, MO, and WI

V

I

S

I

T

R

O

L

A

N

D

M

A

C

H

I

N

E

R

Y.

C

O

MCall AJ Perisho (217) 789-7711 • Email: [email protected]

Metso LT 1415, ‘06, 7,401 hrs ....................$CALL Komatsu WA250PT-5L, ‘05, 9,080 hrs ......$55,299

Financing Available for Qualified Buyers

Quality Used Equipment...with support to back it up

Komatsu PC220LC-6, ‘98, 19,095 hrs ......................$37,100Valmet 840.3 6WD, ‘08, 11,829 hrs ........$159,900

Page 6: Midwest 22 2015

Page 6 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CX130 Excavator

$410/Day, $1,230/Week, $3,690/Month

CX240 Excavator

$700/Day, $2,100/Week, $6,300/Month

CX210 Excavator

$580/Day, $1,740/Week, $5,220/Month

CX460 Excavator

$1,235/Day, $3,705/Week, $11,115/Month

CX160 Excavator

$475/Day, $1,425/Week, $4,275/Month

CX330 Excavator

$875/Day, $2,625/Week, $7,875/Month

CX225 Excavator

$755/ Day, $2,265/Week, $6,795/Month

Excavator Rental Specials

Rent Today!

Clean, reliable equipment Competitive rates Rent by the day, week, or month Delivered to your job site

McCannOnline.com

IllinoisAddison

630-627-0000

Bolingbrook*630-739-7770

Chicago312-942-9200

Crestwood708-597-3110

McHenry*815-385-0420

Wauconda847-526-9444

IndianaSchererville*219-865-6545

* Case authorized dealer location

Serving the Constructor ®

Mark Kruepke • (630) 739-7770Bolingbrook, IL

Contact us at [email protected]

View our complete Used & “Like New” inventoryat McCannOnline.com

McCann Rents a full line of heavy and light constructionequipment. Call us today to supply your next rental.

2006 Towmaster T20T Trailer 24’ deck, 4’stationary plus 20’ tilt, new tires (coming inmid Nov) ..............................................$6,250

2007 Case 450, s/n N7M446035, 2650 Hrs,ROPS, Manual Coupler, Two Speed, RideControl, 73” Bkt, 12x16.5 Tires ..........$19,900

2013 Case SV250, s/n JAFSV250KDM469195,530 Hours, Cab w/AC, EH Controls, HydCoupler, 12 x 16.5 Tires, 78” Bucket ..$38,500

2001 Case 75XT, s/n JAF0318712, 1600 Hrs,ROPS, Hyd Coupler, 73” Bkt w/Teeth Bar,12x16.5 Tires ......................................$16,000

2006 Takeuchi TL150, s/n 21503859, 2950Hours, Cab w/AC, Case Controls, 80” SmoothBucket ................................................$29,500

2013 Case DV26, s/n JDBODV26NDRT25304,850 Hours, ROPS, Road Lights, 47” Off SetDrum ..................................................$29,500

2012 Case DV202, s/n DDDDV202NCTF2016,1175 Hours, Rops, Right side Drive Lever, 47”Drum ..................................................$27,500

2006 Case 580SM, s/n N6C412119, 4600Hours, Cab w/ Heat and AC, 4WD, Ext-hoe,Ride Control, Two Lever, 82” Bucket, 12” and24” Bkt ................................................$42,900

-

- -

Page 7: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 7

Milwaukee, WI1-800-236-6900Fax 414-541-1892

Wausau, WI1-800-242-7113Fax 715-675-9748

Crushing & Screening Div.Little Chute, WI1-800-236-8318Fax 920-788-6753

YOUR AUTHORIZED DEALER

For information on our in-stock equipment, contact Lanny Peterson at:

[email protected] ormobile 1-715-574-8089 or 1-800-242-7113

Visit us at: www.amstate.com

AGGREGATE EQUIPMENTKPI 1500 EV(A) VERTICAL SHAFT IMPACT CRUSHER, Hydra Arm Lid Removal, Electric Motor Mount (Less Motor),2012 ......................................................................................................................................................................$49,500JCI K-400 PORTABLE CONE CRUSHER, 400 HP Electric Feed Conveyor, Side Discharge Conveyor, Hyd. LevelingJacks, Tri-Axle Running Gear, 2006....................................................................................................................$345,000JCI 6X20TD PORTABLE SCREEN PLANT, Underscreen Discharge Conveyor, Two (2) Cross Conveyors, ElectricControl Panel, 2012 ............................................................................................................................................$175,790CEDARAPIDS 4136 PORTABLE TWIN ROLL PLANT, Allis 5’x16’ SD Screen, Cummins V-12 Power, Tandem AxleChassis, Hydraulic Leveling ..................................................................................................................................$61,000METSO/NORDBERG MODEL HP300 CLOSED CIRCUIT PORTABLE CONE PLANT, with a 6'x20' Triple Deck Screen.2003 Model Year ................................................................................................................................................$360,000

CRANESGROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom,32’ to 56’ Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................$155,900GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1995, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$149,500AMERICAN 5300, 1988, 70 Ton Crawler Crane, Cummins w/3 Stage Converter, CLL on One Drum, Third Drum,Independent Travel, 130’ Boom, 30’ Jib ................................................................................................$149,500

SCRAP HANDLING EQUIPMENTLIEBHERR R954BHD WITH A LABOUNTY MSD4500R SHEAR, Carrier and shear have been refurbished ..CALL

GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS

• LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLERCRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/

JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAGCRUSHERS • MANITOWOC CRANES

GROVE RT760LIEBHERR R954BHD

W/ LABOUNTY MSD4500R SHEAR

Large Selection of New & Used Equipment in Stock.

in WISCONSIN and UPPER MICHIGAN for:

Contact Tim or Marty in Illinois1-800-307-0221

[email protected]@finkbinerequipment.comPhotos & Detail Descriptions visit: www.finkbinerequipment.com

BOMAG CR362L - ‘14, 518 Hrs, Track Paver, Stretch 16 Electric Screed, Topcon V System andMore, #C000555 ..................................................................................................................P.O.R.BOMAG CR662RM - ‘15, 114 Hrs, Material Transfer w/Hopper, #C000763..........................P.O.R.GOMACO PLACER - ‘15, 11 Hrs, Self Propelled Rubber Tired Placer to - 24 ft w/30” Belt ....................................................................................................................................................$112,000LEEBOY 700SR - ‘97, 8’ - 12’ Diesel Power, Rubber Tired Paver, #C000847 ......................$9,500MIDLAND SPD6 - ‘15, 62 Hrs, Right and Left Discharge 1-6 ft, Hyd Strike Off, Hyd Pushrollers,Washdown System, #C000820 ............................................................................................P.O.R.

P.O.R. items may be on rent causing pricing and hours to vary.

BOMAG BM600/15 - ’14, 169 Hrs, 24” Grinder with rear discharge conveyor, #C000525 ..................................................................................................................................................................$185,000BOMAG BM1200/30 - ‘14, 693 Hrs, 4’ Mid Mount Grinder with Front discharge conveyor,#C000452 ..........................................................................................................................................P.O.R.KAFKA TRI PACK CONVEYOR - ‘14, 36” x 70’ ......................................................................P.O.R.NEW SANDVIK CJ412 PORTABLE JAW PLANT - ‘14, 47” x 33” + Much More ......................P.O.R.WIRTGEN W50DC - ‘13, 400 Hrs, 20” Cut, Deep Cut Machine, 3 Wheel, Rear Discharge Mill $180,000

HYPAC C784 - ‘08, 84” Double Drum Vib, #C000673 ........................................................$22,500INGRAM 315 - 4 to Choose from, 3 Wheel Static Roller, s/n & Hrs Available ..............$26,500 Ea.SAKAI SW990 - ’14, 721 Hrs, 84” Double Drum Vibratory Roller, #RR10133 ................$114,986SAKAI SW770HF - ’14, 403 Hrs, 67” Drum Remaining Full & EPTW Warranty....................P.O.R.SAKAI SW770HF - ’14, 687 Hrs, 67” Double Drum Vibratory Roller, #C000532..................P.O.R.SAKAI SW770HF - ’12, 700 Hrs, 67” Double Drum Vibratory Roller, #C000577..................P.O.R.SAKAI SW502 - ‘13, 505 Hrs, 51’ Drum 9000 lb remaining std and or eptw warranty, #C000212..........................................................................................................................................$35,148SAKAI SW300 - ‘12, 19 Hrs, 40” Double Drum Vibratory Roller, Full Warranties, #C000746 $29,750SAKAI SW300 - ‘13, 136 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156 ................................................................................................................................................$33,819.31SAKAI GW750-2 - ’14, 110 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ................ $124,808

*Comes with any remaining standard and 3 year extended power train warranty.

GRADALL XL3200 III - ‘14, 955 Hrs, Crawler Mounted Telescoping Boom Excavator....$169,950GRADALL XL4100 - ‘94, 8368 Hrs, Working as is, #C000386, S/N 414218......................$19,500GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ....................$25,000

MILLING MACHINES

ROLLERS

PAVERS / ROAD WIDENERS

EXCAVATORS

Page 8: Midwest 22 2015

Page 8 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Uptime is not optional – we make sure you never have to choose between performance or productivity.We work hard to ensure you spend more time on the job site and less time in the shop. Whether you arebuying or renting, Volvo guarantees the same quality, power & durability for all machines.Choose the equipment you need from a name you trust – Nuss Truck & Equipment

Renting or buyingVolvo has you covered

Smart Works.

MINNESOTABurnsville800.552.1189Duluth800.835.6225Mankato800.862.6225Rochester800.562.1505Roseville800.704.0935St. Cloud888.310.6225

Page 9: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC.Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928

Our Greatest Assets .. Our Employees

Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25rubber, 15K hours, work ready . . . . . . . . . . . .$42,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500John Deere 624G, 1996, EROPS, quick coupler, GPbkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000Volvo L60E, 2005, EROPS, coupler, aux hyd, boomsusp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500

IR SD100D Pro-Pac Vibratory Compactor, 1999,Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean $69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit,ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000(4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, allwork ready . . . . . . . . . . . . . . . . . . . . . .From $79,500Multiquip MR8G Walk Behind Vibratory Compactor,1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500Rammax Walk Behind Rollers, over 25 in stock, lever& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum & singledrum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

Case/IH 485 Utility Tractor, 1986, Case 3 cyl dslengine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72"hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hydangle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500

Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000

Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD,29.5R25, A/C, 29 cy cap. sideboards, tailgate (current-ly off work), work ready . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25,working everyday . . . . . . . . . . . . . . . . . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C,P/S trans, tailgate, work ready . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires,approx 7,000 hrs, good condition . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,P/S trans, working everyday on jobsites . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C,P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade,winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea.Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea.

Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel,10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500Grove RT58C, 1981, down cab, 18 ton r.t., 70' boomanti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500

Cat 613C Water Wagon, 1994, 5000 gal drop tank,ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500Cat 621F, 1996, Scraper, OROPS, 33.25x2, very goodcondition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29, very nice

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou-pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber,operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, longstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44"Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6"TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALLKomatsu PC160 LC-7KA, 2004, 24” TBG pads, JRBcoupler, plumbed, 8’6” width, nice, work ready . .CALLVolvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick,5.12 cy bkt, 22,000# ctwt, hammer/shear plumbingvery good condition . . . . . . . . . . . . . . . . . . .$159,000

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL

(12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . .From $5,200

Case 580L Rubber Tire Loader Backhoe, 1997,OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500

John Henry Drill Mtd on Cat 320N, 1994, 24' mast,Duraquip dust collection . . . . . . . . . . . . . . . .$150,000

(2) Balderson Broom Attachment for Cat IT Machines,8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea.

BUCKETSPC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500Over 100 Excavator, Loader, Specialized & Grapple

Buckets in Stock-Call For Your Needs

FORKS(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style,excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000

Others Available CallPrices Are Negotiable - At Your Inspection

All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS

CRAWLER LOADERS

OFF ROAD HAULERS

MOTOR SCRAPERS

DRILLS

ATTACHMENTS

MISCELLANEOUS

WHEEL LOADERS

HYDRAULIC EXCAVATORS

CRAWLER TRACTORS

COMPACTORS

LANDSCAPING

CRANES

SPECIALS

BACKHOES

AIR COMPRESSORS

Page 10: Midwest 22 2015

Page 10 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Asphalt / Pavers / Concrete Equipment2012 BLAW-KNOX PF1510, 100 Hrs ................................................................................................$176,0002013 BLAW-KNOX RW100B, 20 Hrs ................................................................................................$209,0002012 BLAW-KNOX RW35A, 10 Hrs ......................................................................................................$60,5002013 BLAW-KNOX RW35A, 10 Hrs ......................................................................................................$60,500

Compactors - Padfoot2010 HAMM 3412P, 1300 Hrs ................................................................................................................$66,000

Compactors - Smooth Drum2009 VOLVO SD100D, 2500 Hrs ..........................................................................................................$77,0002013 VOLVO SD75, 1770 Hrs ................................................................................................................$77,000

Drills - Vertical2012 SANDVIK DI550 ..............................................................................................................................$646,600

Excavators - Crawler2013 VOLVO EC160DL, 1750 Hrs ......................................................................................................$121,0002013 VOLVO EC210B LC, 3300 Hrs ................................................................................................$112,7502012 VOLVO EC210CL, 3800 Hrs........................................................................................................$77,000(4) 2013 VOLVO EC220DL, 1700-2900 Hrs ............................................................$121,000-$137,500(7) 2014 VOLVO EC220DL, 1550-1950 Hrs ............................................................$134,750-$140,2502012 VOLVO EC250D LR, 2800 Hrs ................................................................................................$159,5002013 VOLVO EC250D LR, 2100 Hrs ................................................................................................$176,0002011 VOLVO EC250DL, 4400 Hrs......................................................................................................$126,500(2) 2013 VOLVO EC250DL, 1516-1900 Hrs ............................................................$148,500-$165,0002012 VOLVO EC300DL, 1900 Hrs......................................................................................................$184,2502006 VOLVO EC330B LC, 6400 Hrs ..................................................................................................$71,5002009 VOLVO EC330CL, 3154 Hrs......................................................................................................$110,000(6) 2012 VOLVO EC340DL, 1640-4800 Hrs............................................................$154,000-$222,750(8) 2013 VOLVO EC340DL, 1600-3600 Hrs............................................................$173,250-$225,500(4) 2014 VOLVO EC340DL, 1580-4200 Hrs ............................................................$156,750-$225,5002013 VOLVO EC380DL, 4500 Hrs......................................................................................................$156,750(3) 2014 VOLVO EC380EL, 1660-2900 Hrs ............................................................$209,000-$233,7502011 VOLVO EC460C LC, 6700 Hrs ................................................................................................$187,000(2) 2012 VOLVO EC480DL, 2100-4050 Hrs ............................................................$231,000-$302,5002013 VOLVO EC480DL, 3400 Hrs......................................................................................................$253,0002014 VOLVO EC480DL, 2000 Hrs ....................................................................................................$308,000

Excavators - Wheel2008 FUCHS MHL350D, 12175 Hrs..................................................................................................$110,000(2) 2011 VOLVO EW180C, 3100-3400 Hrs ............................................................................$126,500 Ea.2012 VOLVO EW180D, 1850 Hrs ......................................................................................................$170,500(2) 2013 VOLVO EW180D, 1800-2500 Hrs..............................................................$159,500-$170,500

Motor Graders2008 VOLVO G930, 6900 Hrs ............................................................................................................$104,5002010 VOLVO G930, 6900 Hrs..............................................................................................................$104,500

Off-Highway Trucks2011 VOLVO A25F, 5500 Hrs ..............................................................................................................$203,500(6) 2012 VOLVO A25F, 2905-4400 Hrs ....................................................................$209,000-$250,250(5) 2013 VOLVO A25F, 1900-3200 Hrs ....................................................................$244,750-$288,750(7) 2014 VOLVO A25F, 1866-2700 Hrs ....................................................................$261,250-$288,7502014 VOLVO A25G, 1554 Hrs ..............................................................................................................$305,2502006 VOLVO A30D, 7030 Hrs..............................................................................................................$220,000(8) 2012 VOLVO A30F, 2900-4100 Hrs ....................................................................$239,250-$283,250(2) 2013 VOLVO A30F, 2850-4200 Hrs ....................................................................$239,250-$286,000(9) 2014 VOLVO A30F, 1528-2530 Hrs ....................................................................$297,000-$327,250(6) 2012 VOLVO A35F, 2915-5579 Hrs ....................................................................$247,500-$360,4002010 VOLVO A40E, 3900 Hrs ..............................................................................................................$328,600(12) 2011 VOLVO A40F, 4744-7600 Hrs ..................................................................$231,000-$323,300(16) 2012 VOLVO A40F, 2700-5800 Hrs ..................................................................$286,000-$392,200(13) 2013 VOLVO A40F, 2100-6000 Hrs ..................................................................$286,000-$424,000(5) 2014 VOLVO A40F, 1900-5200 Hrs ....................................................................$360,400-$429,300(2) 2013 VOLVO A40F FS, 2900-5200 Hrs ..............................................................$349,800-$392,200(3) 2014 VOLVO A40G, 2050-5100 Hrs ....................................................................$360,400-$514,100

Sweepers / Broom Equipment(2) 2014 BLAW-KNOX CB90, 15-1000 Hrs................................................................................$60,500 Ea.2012 BLAW-KNOX FB90, 1500 Hrs......................................................................................................$49,500(2) 2013 BLAW-KNOX FB90, 1000-1200 Hrs ..........................................................................$49,500 Ea.(2) 2014 BLAW-KNOX FB90, 650-900 Hrs ................................................................................$66,000 Ea.2010 BROCE MK I, 700 Hrs ....................................................................................................................$66,000

Water Equipment - Trucks2006 CATERPILLAR 773, 11900 Hrs ................................................................................................$220,0002008 VOLVO A25, 7900 Hrs ................................................................................................................$220,0002006 VOLVO A30D, 7600 Hrs..............................................................................................................$198,000

Wheel Loaders2014 SDLG LG916-1, 208 Hrs ............................................................................................................$104,5002014 SDLG LG938L, 116 Hrs ..............................................................................................................$104,5002011 VOLVO L110F, 7550 Hrs................................................................................................................$99,000(4) 2012 VOLVO L110G, 1880-2800 Hrs ..................................................................$181,500-$214,500(10) 2013 VOLVO L110G, 2500-7200 Hrs ..............................................................$143,000-$187,0002014 VOLVO L110G, 2143 Hrs ............................................................................................................$214,500(3) 2014 VOLVO L110H, 1950-2200 Hrs ..................................................................$214,500-$220,000(2) 2012 VOLVO L120G, 3845-3850 Hrs ................................................................................$181,500 Ea.2013 VOLVO L120G, 2600 Hrs............................................................................................................$203,500(2) 2014 VOLVO L120G, 2200-2600 Hrs..................................................................$203,500-$214,5002010 VOLVO L150F, 11950 Hrs ..........................................................................................................$110,0002012 VOLVO L150G, 5100 Hrs............................................................................................................$198,000(4) 2014 VOLVO L150G, 2000-3200 Hrs..................................................................$286,000-$319,0002011 VOLVO L180G, 6200 Hrs............................................................................................................$165,000(2) 2012 VOLVO L180G, 4900-5500 Hrs..................................................................$198,000-$220,0002013 VOLVO L180G, 5500 Hrs............................................................................................................$198,0002014 VOLVO L180G, 2250 Hrs............................................................................................................$302,5002013 VOLVO L220G, 2700 Hrs ..........................................................................................................$360,400(2) 2012 VOLVO L250G, 1950-3300 Hrs ..................................................................$313,500-$355,1002012 VOLVO L60G, 2100 Hrs ..............................................................................................................$129,2502013 VOLVO L60G, 3000 Hrs ..............................................................................................................$115,500(4) 2014 VOLVO L70G, 1700-2600 Hrs ....................................................................$137,500-$148,500(4) 2012 VOLVO L90G, 1189-5300 Hrs ....................................................................$110,000-$192,500(11) 2013 VOLVO L90G, 882-6000 Hrs ....................................................................$110,000-$192,500(7) 2014 VOLVO L90G, 1600-2700 Hrs ....................................................................$154,000-$165,000

2012 VOLVO L250G, 1950 Hrs ......$355,1002013 VOLVO EC220DL, 2900 Hrs $121,0002014 VOLVO A25F, 1866 Hrs ..........$288,750

A40 Finance leasing available for 24 months with payments as low as $7,900 per month. Call Doug Wilson for details.

Full inventory at: www.ascvolvo.com

VOLVO USED EQUIPMENT

ASC ConstructionEquipment USA, Inc.

North DakotaBismarckFargoMinotWilliston

North CarolinaCharlotteRaleighAshevilleGreenville

South CarolinaColumbiaNorth CharlestonPiedmont

GeorgiaBufordSavannah

East TennesseeKnoxvilleChattanooga

Contact your local dealer:

Doug [email protected]

Billy [email protected]

Page 11: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 11

When power and versatility are key, look no further than your local Volvo dealer, ASC Equipment. Engineered for success, Volvo Construction Equipment provides outstanding power and durability while maintaining Volvo’s high standard of comfort and safety.

Reliability and power.Volvo delivers.

ascvolvo.com

NORTH DAKOTABismarck701.250.4882Fargo701.271.2360Minot701.839.4020Williston701.570.5309

GEORGIABuford678.318.9500Savannah912.964.8079

SOUTH CAROLINANorth Charleston843.414.1120Columbia803.791.0740Piedmont864.704.1060

NORTH CAROLINAAsheville828.687.0620Charlotte704.596.8283Greenville252.754.5280Raleigh919.661.8710

TENNESSEEChattanooga423.308.7940Knoxville865.525.1845

Smart Works.

Page 12: Midwest 22 2015

Page 12 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Nearly 200 Customers, Guests Attend Live Equipment Demo

(L-R): Greg Terzinski, Gerry Schwartz, Bill Dennison, all of Mihalko Land &Logging and Ben Parson of FISTA (forest industry safety training alliance)register for the live cut event.

Jason Flannery (fifth from left) Blackwell JobCorp. brought some students from the near-by Blackwell training facility to the live cutevent to see how the John Deere forestryequipment operates. The Balckwell Job Corp.teaches students from inner cities tradeskills in construction, landscaping, cementwork, dirt work and many other fields.

(L-R): Steve Anderson of SteveAnderson Forrest Products;John Oman, Jacobson Logging;and Randy and Jim Mylchreest,both of Nortrax gather aroundthe John Deere 415 head.

Jon Takosky, John Deere ForestryEquipment (third from left), shows theJohn Deere 648L grapple skidder to theguys from Jim Collins Logging. (L-R) areDillon Hollon, Mark Gain, Jim Collins,Mike Dowd and Daniel Perrow.

(L-R): Dwight and Luis Yoder and JasonWhitaker of Nortrax in front of the JohnDeere 803MH with Waratah 622B head.

Dennis Rosa, mayor of Crandon, Wis., stopsby the live cut event and says hello to BenRichmond, CFO, Nortrax and Andy McMillionand Karen Kroeplin, both of Nortrax.

(L-R): Shawn Collins of Shawn Collins Logging; Scott Lippens,Nortrax; Brady McIntee of McIntee Harvesting; and MikeMeddaugh of Meddaugh Enterprises inspect the John Deere 1110Eeight wheel forwarder.

(L-R): Ken Knauf, Nortrax; Tom Wilson;and Butch Knauf of Nortrax enjoy thegreat weather for the live cut event.

Nearly 200 customers and guests attendedthe live equipment demonstration heldon Oct. 7 at the Crandon International

Off Road Raceway in Crandon, Wis. Loggersfrom around the upper Midwest were invited towatch John Deere harvesters, Feller bunchers,forwarders and skidders work in unison andwatch operators show off their productivity andefficiency in the woods. Product seminars ontopics such as machine optimization, bar andchain maintenance and head automation wereoffered and allowed loggers to obtain SFI(Sustainable Forestry Initiative) credits. Nortrax, John Deere forestry specialist and

Morbark representatives were on hand toanswer questions and provide in-depth machinewalk-arounds and tours of the equipment.Lunch was served under a big tent in thewoods. The Crandon International Off RoadRaceway grounds provided the perfect settingfor a live equipment demo on a beautifulautumn day.For more information, visit

www.nortrax.com.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG

Page 13: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 13

MehnDoug

od us tlll us tCayer / BrMehn

ay!dday!Gangeran y

.Rww.Rwwww

oused.cB

(866

mo

85) 4(866 -71

eblCe

0871

th r 30u ongg oratiingb

r!eaYYea

2007 CAT 953D: #82368, CAB/AC, SINGLE-LEVER, 4-IN-1 BKT, 4,800 HRS ....$159,500

2010 CAT 963D: #82329, CAB/AC, GPBUCKET, 4,600 HOURS..................$199,500

2003 KOMATSU WB140PS-2: #50171,CAB/AC, 4X4, EXT-A-HOE, GP BKT, AUXHYD, 3,000 HOURS ........................$49,500

2008 KOMATSU WB146-5: #50988,CAB/AC, 4X4, GP BKT, 1,800 HRS ..$56,500

2007 KOMATSU PC220 LC-8: #81992,CAB/AC, KOMTRAX, 7350 HRS ......$99,500

2006 KOMATSU PC300 HD-7E0: #82231,CAB/AC, 31.5" TRACKS, 10'5" ARM, AUXHYD, KOMTRAX, 6,500 HRS..........$124,500

2007 KOMATSU PC300 LC-8: #82273,CAB/AC, 33.5” TRACKS, 13’ ARM, PCV,KOMTRAX, 4,400 HRS ..................$179,500

2011 KOMATSU PC308US LC-3E0: #82416,CAB/AC, QC, AUX HYD, KOMTRAX, 4,400HRS................................................$189,500

1985 CAT D8L: #91970, CAB, SEMI-UBLADE, SINGLE-SHANK RIPPER, 14,800HRS................................................$112,500

2000 CAT D6R XL : #92198, CAB/AC, 30"TRACKS, 3-SHANK RIPPER, SEMI-U BLADE,14,250 HOURS ................................$89,500

2007 KOMATSU D61EX-15: #80743,CAB/AC, PAT BLADE, 24” SHOES, DRAW-BAR, 4,650 HOURS........................$129,500

2004 KOMATSU D65EX-15: #81875,CAB/AC, DRAWBAR, SEMI-U BLADE,11,300 HRS......................................$79,500

2004 KOMATSU WA250-5: #82198, CAB/AC,QC/BUCKET, 4,200 HRS ..................$69,500

2007 KOMATSU WA320-5: #82063, CAB/AC,GP BUCKET, 3RD VALVE, 4,450 HOURS..............................................................$132,500

2011 KOMATSU WA470-6: #82135, CAB/AC,GP BUCKET, KOMTRAX, 3,200 HRS ....................................................................$219,500

2007 KOMATSU WA500-6: #81625,CAB/AC, 29.5-25 TIRES, KOMTRAX, 8,500HOURS ..........................................$259,500

Page 14: Midwest 22 2015

Page 14 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hall Industrial Company/Midwest Mine Hosts Event

(L-R): Hall Industrial’s Scott George, BobKeaton Jr. and Tim Kidd welcome attendees tothe company’s customer appreciation event.

Ken Makin (L) and Bob Keaton trade sto-ries at the event.

Angie and Mike Szabo ofAmerican Aggregates stop by toenjoy the festivities.

(L-R): Bob Keaton Sr. and Bob Keaton Jr. catch upwith Dave Baker of Shelly Company and JimWilliams of Black & Veatch.

John and Lisa Fork of CardinalAggregate join the festivities.

Seated (L-R) are Sue and MarionBlack and Terry Speakman ofKurtz Bros. and (L-R) standing are Helen and Bill Page of Duff Quarry.

(L-R): Ben Debos of Stoneco joins Robb Kidd of HallIndustrial and Scott Bowman of Stoneco at the event.

Olen’s Lisa and Jeff Vansickle and Scottand Aimee Shaver relax with LisaParsley of Hall Industrial.

Hall Industrial Company/Midwest Mine Services recently hostedapproximately 400 guests at the company’s customer appreciationevent held at the Sunrise Park & Banquet in Millbury, Ohio.

According to Hall Industrial’s Scott George, the event was held as a wayto thank the company’s clients and get together in a relaxed atmosphereto enjoy an evening’s entertainment. The company had held similarevents in the past and they’ve always proven to be extremely popular.

This year, attendees were welcomed with door prizes upon arriving,and treated to a steak dinner and live entertainment. After dinner, HallIndustrial’s guests enjoyed themselves at an onsite Casino and trans-portation to and from the Hollywood Casino in Toledo, Ohio. Attendeesof the event included Hall Industrial Company’s customers and theirdates from Ohio and southern Michigan.

Founded in 1965 by Fred Hall and involved primarily in fluid power,Hall Industrial shifted to focus on the aggregate industry when BobKeaton and Jay Zvanovec took ownership of the operation in 1999. In

2002, the company added MidwestMine Services LLC as a divisionfocused on installation and repair serv-ices. Together, the companies servequarries, demolition contractors, recy-cling operations and other aggregate,topsoil, supplying equipment as well asinstallation, maintenance and repairservices throughout Ohio and Michigan.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.) CEG

(L-R): Edward C. Levy company’s Joeand Rita Gretch, Diana Beck and EdWard along with Brandon Ward enjoyedthe night out with Hall Industrial.

(L-R): Hall Industrial’s April Kidd, Jamie Keaton, Stephanie Keaton, RachelKaylor and Holly Kidd serve as the welcoming crew at the event.

Page 15: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 15

JD 9560RT ScraperTractor, 30” Tracks,#52276 ..........$287,000

JD 850K, 24” Pads,128” Semi U Blade,Ripper, Full Warranty,#75578 ..........$208,000

NPK Hammers, AllSizes for All Makes.Inspected and WellMaintained, GH4-GH18

JD 350DLC, 13’1” Arm,32” Pads, #75023................................$139,000

Volvo L220F, Cab, Air,GP Loader, #75214 ..............................$119,000

JD 755D, Cab, Air, GPBkt, #95971 ......$105,000

JD 9560R ScraperTractor, #52318 ..................................$245,000

JD 800CLC, 11’10”Arm, 36” Pads, CWRD,#94252 ..........$188,000

JD 744K, Cab, Air, 5,25yd Bkt, Warranty,#75521 ..........$239,000

JD 400D, 8000 GallonKlein Water Tank,#74752 ..........$209,000

Bomag BW213PDH-3,Cab, Air, 84” Padfoot,#92390 ............$85,000

JD 250GLC, 11’ 10”Arm, 32” Pads,Warranty, #94036 ................................$189,000

JD 624K, Cab, Air, HiLift, GP Bkt, #95215............................$179,000

JD 350GLC MaterialHandler, #52129 ................................$465,000

JD 700K LGP, 30” Pads,132” PAT Blade, #94673......................$168,000

Challenger MT955B,Cab, Air, Duals, Radials,#75562 ..........$129,000

JD 844K, Cab, Air, 7.25yd GP Bkt, #93575..............................$208,000

JD 245GLC, 9’7” Arm,32” Pads, Hyd Thumb,#95039 ..........$199,000

Case STX550 ScraperTractor, #75384 ..................................$217,000

JD 225DLC, 9’ 7” Arm,32” Pads, Aux Hyd,#91555 ..........$162,000

Page 16: Midwest 22 2015

Page 16 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2013 Kubota SVL75-2

Stk#34326-(L) C/H/A, Hyd Quick Attach, 2Spd, 15” Trks, IT4 Engine, Factory WarrantyRemaining, Rental Fleet, 621 Hrs ......$43,900

2013 Kubota SVL90-2

Stk# 52375-(L) C/H/A, Hyd Quick Attach, 2Spd, 18” Trks, IT4 Engine, Factory WarrantyRemaining, Rental Fleet, 679 Hrs ......$50,900

2013 Kubota L5460HST

Stk# 52361-(S) ROPS, Hydrostatic, 54HP,4WD, Full Factory Warranty, Demo ................0% for 60 Months, $466 per month + Tax &UCC Fee OR $27,900

2013 Kubota RTV-X1120D

Stk# 65426-(L) 24.8HP, Camo, Alloy Wheels,ATV Tires, Spray In Bedliner, Factory WarrantyRemaining, Rental Fleet, 135 Hrs ......$12,900

Anoka (A), MN888-448-5266 • 763-323-1720

Loretto (L), MN888-479-4342 • 763-479-8200

Shakopee (S), MN877-753-6100 • 952-445-6310

www.lanoeq.com www.lanoequip.com www.lanogardengear.com

Get a Load of Kubota Quality

2013 Kubota KX080-4

Stk# 52323-(S) C/H/A, Blade, Bucket, FactoryWarranty Remaining, Rental Fleet, 744 Hrs..............................................................$79,900

2014 Kubota KX057-4

Stk# 89566-(S) C/H/A, Blade, SP2 Hyd, Hyd.Thumb, Bucket, Factory Warranty Remaining,Rental Fleet, 570 Hrs ........................$58,900

2013 Kubota KX057-4

Stk# 52322-(A) C/H/A, Blade, Hyd Thumb,Bucket, Factory Warranty Remaining, RentalFleet, 253 Hrs ....................................$62,900

2012 Kubota U55

Stk# 15268-(S) C/H/A, Blade, HydraulicThumb, Rubber Tracks, Bucket, Rental Fleet,1509 Hrs............................................$45,900

2014 Kubota KX040-4

Stk# 65329-(S) ROPS, 6 Way Blade, QuickTach, Hyd Thumb, 24” Bkt, Factory Warranty,Demo, 105 Hrs ................0% for 60 Months,$883 per month + Tax & UCC Fee OR $48,500

2015 Kubota U17

Stk# 94439-(A) ROPS, Blade, Rubber Tracks,Bucket, Factory Warranty Remaining, RentalFleet, 65 Hrs ......................................$29,900

2015 Kubota K008T4

Stk# 94590-(S) ROPS, Blade, Bucket, FactoryWarranty Remaining, Rental Fleet, 88 Hrs................................................................$16,900

2013 Kubota SVL75-2

Stk# 32028-(A) C/H/A, Hyd Quick Attach, 2Spd, 15” Trks, IT4 Engine, Factory WarrantyRemaining, Rental Fleet, 424 Hrs ......$45,500

Page 17: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 17

(262) 781-3770

SEE PHOTOS OF OUR COMPLETE INVENTORY AT WWW.ARINGEQUIPMENT.COM13001 W. Silver Spring Drive

Butler, WI 53007

Jim KingMobile: (414) 530-0592

Fax: (262) 781-5053Email: [email protected]

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL BREK ZORTMAN (414) 750-3351 FOR MORE INFO.

2012 Volvo EC480DL, 23' boom, 11' arm, 36" pads, frontwork lights, mech. suspension seat w/heat, radio w/cd & mp3,rotating beacon, rear camera, climate control w/ac, pilot pattern controls................................................................CALL

1998 Volvo L120C, Cab, Heater, Contronics, F/R Switch,Heated Operator’s Seat, Work Lights, Hydraulic AttachmentBracket, Right Hand Footstep, Towing Hitch, 4cy Bucketw/BOE, 23.5-25 Tires *Bucket only - No Forks* ............CALL

2012 Volvo ECR58, 16” Rubber Tracks, Auto Idling, Heat/AC,Pilot Controls, Counterweight ......................................$65,000

2007 Volvo L70F, Cab, A/C, Radio w/CD, Operator’s Seatw/Left Hand Armrest, Sliding Window Operator’s Door, WorkLights, Boom Suspension, 3rd Function, Hydraulic AttachmentBracket, Reversible Cooling Fan, Engine Auto Shutdown,Reverse Alarm, Rotating Beacon, Rear Frame Cover Plates,Full Rear Fenders, 100” 2.9cy Bucket w/BOE, 20.5R25 Tires....................................................................................$98,500

2012 Volvo A40F, A/C, Radio w/CD, Automatic TractionControl, Heated Air Susp Seat w/Armrest, Front Work Lights,Volvo D16H (476hp) Tier 4i Engine, Rear View Color Camera,Electric Hood Opener, Delayed Engine Shutdown, EngineBlock Heater, CareTrack Telematics System, 29.5R25 MichelinXADN Tires ................................................................$405,000

2008 Finlay J1175, J1175 portable track crusher, magnet,variable feeder, diesel drive, self contained, hopper wings ........................................................................................$351,000

2014 Volvo L90G, Cab, A/C, Radio w/CD, Heated Operator'sSeat w/Left Hand Armrest, Forward View Mirror, Rear Cameraw/Color LCD Monitor, Sliding Window Operator's Door, HalogenWork Lights Front/Rear, Boom Susp, Hyd Attachment Bracket,Reversible Cooling Fan, Reverse Alarm, Rotating WarningBeacon, Full Rear Fenders, CareTrack System, 104" 3.5cyBkt w/BOE, 20.5R25 Yokohama RB31 L-3 Tires........$163,500

2011 Volvo L220G, A/C, Radio w/CD, Heated Air Susp Seat,Rear Camera, Electro-Hydraulic Servo Controls, OptiShift,Comfort Drive Control, Boom Suspension, Work Lights,Reversible Cooling Fan, Axle Oil Cooling, Engine Block Heater,Full Rear Fenders, Re-Handling Counterweight, CareTrackHardware, 134” 8.2cy STE Bkt w/BOE, 29.5R25 Michelin L-4Tires, Volvo D13H-F (Tier 4i) ....................................$260,000

2008 Finlay 663 Supertrak, Hydraulic grizzly, portable Finlayscreen plant, with hydraulic discharge side conveyors, underscreen discharge convevyor, diesel hydraulic self-containedrubber tire tandem axle..............................................$140,000

2012 Doppstadt DW3060K, Bio-Power Track Shredder,Cross Belt Magnet, Daimler Chrysler diesel OM 460LA tier IIIBengine, 483 hp, Fuel consumption is approximately 8 gph,Like New, Excellent Condition ..................................$550,000

2011 Volvo SD116DX, Work lights, flow divider, bolt on pad footshell, inside scrapper, universal scrapper, grill support installa-tion, operating weight 23,930 lbs, vib frequency 1,870-2,018vpm, vibration centrifugal force: 47,900-61,000 lbs, 84" drumwidth ............................................................................$92,500

2012 Cat D6T XLVP, Erops, A/C, Air Suspension Seat, Electro- Hydraulic Differential Steer, Work Lights, 3rd Valve, 24” ES Pads, VPAT Blade, Winch ..............................$240,000

2013 Volvo EC300DLR, Long Reach, 33’6” Boom, 25’11” Arm,36” Triple Grouser Pads, Mech. Susp. Seat w/Heater, Joystick 4 Switches, Rear Camera, Pilot Pattern Control Change,Straight Travel Pedal, Boom Float, CWT 6800kg......$220,000

2012 Volvo L250G, 875/65R29 L4 Good Year tires, eng autoshutdown, eng block heater, radio w/cd, rear camera, comfortdrive controls, boom suspension, 140" 8.8CY bkt......$420,000

2013 Volvo L70G, A/C, Radio w/CD, Heated Air SuspOperator's Seat w/Left Hand Armrest, Rear Camera w/ColorLCD Monitor, Sliding Window Operator's Door, Boom Susp,Hydraulic 4 Functions, , Reversible Cooling Fan, ReverseAlarm, CareTrack Satellite Sys. w/3yr Subscription, 100" 3.1cyBkt w/BOE, 20.5R25 MI XHA2 L3 tires ....................$146,500

2008 Volvo A40E, A/C, Radio w/CD, Air Suspension Seatw/Armrest, Front Work Lights, Elec Hood Opener, DelayedEngine Shutdown, 29.5R25 Tires ..............................$295,000

Page 18: Midwest 22 2015

Page 18 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Golfers Raise More Than $10K for IAAP Political Committee

Gerry Nagel, Brian Gormsen, Matt Morrison and Jerry Hepburn took thethird place trophy for Hanson Material Service with a score of 62.

First place honors went to the Central Stoneteam of Darin Roland, Art Roland, ChrisDugeon and Chris Koch with a score of 60.

Second place, with a score of 60, went to the team of Meghan Ross and Josh Quinn,Bluff City Materials and Mike Linhart, Quad City Safety.

A beautiful day welcomed 184 golfers to the Sept.28 golf outing held at Panther Creek Country Cluband Piper Glen Golf Club in Springfield, Ill. Due tothe strong support of everyone attending, this outingraised $10,920 for the IAAP Political ActionCommittee.

The golf outing offers a unique opportunity tohave fun and visit with friends in the aggregatesindustry. Using a scramble format, the event provedto be highly competitive once again. In addition togolf, a delicious meal at the end of the day was con-cluded with recognition for the best scores and out-standing players at both courses, trophy awards andnumerous raffle and door prizes. Everyone agreed itwas a fine day to be playing golf. The 2016 IAAPgolf outing is scheduled for Sept. 12.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.construc-tionequipmentguide.com.) CEG

The team ofTroy Kutz,Bluff City

Materials;Larry O’Neill,

Patten CAT;David Piehler,

McAllisterEquipment;

and JeffLovgren, AstecMobile Screens

took thirdplace.

Pat Pagliocca accepts the secondplace award for the Anixterteam, which had a score of 63.

Accepting the first place trophy with a score of 56 was the Lafarge team ofDan Larson, Jason Chojnacki, Randy Bromberek and Jack Keeler.

Panther Creek Country Club Piper Glen Golf Club

Page 19: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 19

www.tristatebobcat.com

TREES, BRANCHES, LIMBS AND STUMPS ARE NO MATCH FOR A BRUSH BANDIT®!Rent the brush chippers and stump grinders that tree care professionals want to own! Get your spring yardwork done faster and more efficiently than ever before with a Brush Bandit® chipper or Bandit stump grinder! Choose from different styles and sizes to suit your needs. Tri-State Bobcat – your uthorized Bandit dealer for Minnesota and Wisconsin. Call today to reserve yours!

NEW1200 East Hwy 13

Burnsville, MN 55337 (952) 894-0894

N!NEW Hudson Location

NOW OPEN! Burnsville Locatio Canada Location

3101 Spruce St.Little Canada, MN 55117

(651) 407-3727

WITH THREE LOCATIONS TO SERVE YOU!

TREES, BRANCHES, LIMBS AND STUMPS ARE NO MATCH FOR A BRUSH BANDIT

TREES, BRANCHES, LIMBS AND STUMPS ARE NO MATCH FOR A BRUSH BANDIT

!® BRUSH BANDIT ®

work done faster and more efficiently than ever before with a Brush BanditRent the brush chippers and stump grinders that tree care professionals want to own! Get your spring yardTREES, BRANCHES, LIMBS AND STUMPS ARE NO MATCH FOR A BRUSH BANDIT

Choose from different styles an

work done faster and more efficiently than ever before with a Brush BanditRent the brush chippers and stump grinders that tree care professionals want to own! Get your spring yardTREES, BRANCHES, LIMBS AND STUMPS ARE NO MATCH FOR A BRUSH BANDIT

nd sizes to suit your needs. Tri-State Bobcat – your day to reserve yours!

chipper or Bandit stump grinder! ®work done faster and more efficiently than ever before with a Brush BanditRent the brush chippers and stump grinders that tree care professionals want to own! Get your spring yard

!TREES, BRANCHES, LIMBS AND STUMPS ARE NO MATCH FOR A BRUSH BANDIT

uthorized Bandit dealer for Choose from different styles and sizes to suit your needs. Tri-State Bobcat – your

uthorized Bandit dealer for

otebatis.trwww

(952) 894-0894 MN 55337 Burnsville,

East1200 NEW Burnsville Locatio

NOW OPEN!

TIAATIONSCOLTHREETHIW

mco.tabco

(952) 894-0894 MN 55337 Hwy 13tt Hwy 13

Burnsville LocatioNOW OPEN!

!OUYRVEETO STIONS

Little Canada,

Canada Location

(651) 407-3727 MN 55117Little Canada,

3101 Spruce St.

Hudson LocationNEW N!

www.tristatebobcat.com

ALL OF YOUR

RENTAL EQUIPMENT NEEDS

SALES - SERVICE - REN

SALES - SERVICE - REN

SALES - SERVICE - REN

APPAAL - TTAL - SALES - SERVICE - REN

TSRA

SALES - SERVICE - REN

SALES - SERVICE - REN

SALES - SERVICE - REN

APPAAL - TTAL - SALES - SERVICE - REN

TSRA

tsir.twww

moc.tacbobteat

RENT IT!

Skid Steers

Excavators

Mini Track Loaders

Attachments

Page 20: Midwest 22 2015

Page 20 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

see ROLAND page 32

Roland Machinery Hosts Customer Appreciation Night

Chris Ingram (L), Roland Machinery sales repre-sentative, shows the Komatsu PC360 LC to KurtCuffle, Sangamon County highway department.

Jay Germann (L), general manager of theSpringfield division of Roland Machinery Co.,and Dunn Company’s Greg Beyers catch up atthe event.

Customers test their operating skills with this Komatsu PC138USLC-10 while competing in excavator basketball.

(L-R): Ray Roland, CEO, Roland Machinery Co., welcomes BobBruner, United Contractors Midwest, and his son, Adam, to the cus-tomer appreciation BBQ dinner.

(L-R): Ernie Bliesner, HansonMaterial Service; Jeff Butler,Butler Construction; andBob Craigmiles, BliesnerFence, stop by after a hardday of work.

(L-R): Brad Slagle, Eric Gregory, TrentConrad and Todd Dunham, all of UnitedContractors Midwest, and Brady Bonds,Dunn Company, enjoying the customerappreciation BBQ dinner.

(L-R) are Jay Germann, general manager of theSpringfield division of Roland Machinery Co.;Steve Halverson, president, HalversonConstruction Co. Inc.; Kyle Zellers, also ofHalverson; Matt Roland, president, RolandMachinery Co.; and Chip Reyhan, president,Sangamo Construction Co.

Roland Machinery Company held acustomer appreciation night on Oct.16 at the company’s main office in

Springfield, Ill. The company served a BBQdinner with all the fixings and gave awaydoor prizes. Customers had the chance totest their skills by playing excavator basket-ball.

The event provided the opportunity forcustomers to look at the many differentlines of equipment that Roland Machineryoffers such as Komatsu, Wirtgen, Hamm,Vogele, Kleemann, Atlas Copco,Montabert, LeeBoy, Esco and Hensley.

For more information, visit www.roland-machinery.com.

(This story also can be found onConstruction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)CEG

Page 21: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 21

Ram 55006.4L Gas, Dump bed truck

Fall Special $56,988*

Promaster 1500FWD V/6 Auto, P/W, P/L, T/C, A/C

MSRP $31,025

Fall Special $25,848*

Choose from 32

PromasterMSRP $34,965

Fall Special $27,848*

Promaster City

Fall Special $28,195*

2014 RAM 2500 PASSENGER PROMASTER

12 Passenger Capacity, Rear Heat and AC

MSRP $54,745

Fall Special $48,095*Knapheide Gooseneck Body

Fall Special $33,586*

Diesels HereDiesels Here

Keith Babin and my salesman Craig were AWESOME. They worked very hard tomake sure we got the best deal we could. We actuality got two vans, and$2000 for the wrap which turned out great as you can see. I love my new ProMaster 1500. I get people turning their heads and giving me the thumbs up onthe highway every time I drive it.

Tony Mahmood

#1Chrysler Corp. Commercial

Dealer in Minnesota

We Deliver!

The fast lane for small business.

18 Cabs and Chassis in Stock

More Coming!

RAM H.D. HEADQUARTERSFury Ram Truck Center, Lake Elmo, Minnesota651-777-1316 • Visit us at furymotors.com

* Pricing represents all Denver business center rebates deducted!

32 Promasters Ready to Go!If we don’t have it,

we’ll build it for you!

NOW OPENFury Ram Truck Center

Page 22: Midwest 22 2015

Page 22 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 23: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 23

.com

2007 CATERPILLAR 236B, ID# HUC0155, S/N#HEN05965, 2743 HOURS, OROPS ..........................$18,900

2010 CATERPILLAR TL943, ID# NGU0218, S/NTBL01586, 2505 HOURS ..............................................$65,200

2010 CATERPILLAR TH255, ID# HGU0040, S/N#TBS00490, 1195 HOURS ..............................................$41,800

2009 CATERPILLAR 120M, ID# NUC0409, S/ND9W00125, 3695 HOURS ........................................$160,500

2008 CATERPILLAR 140M, ID# HUC0047, S/NB9D00861, 5680 HOURS ..........................................$135,700

2013 CATERPILLAR 906H2, ID# NUC0414, SN#JRF00780, 3200 HOURS................................................$54,900

2007 CATERPILLAR 325D, ID# HUC0232, S/NA3R00826, 6595 HOURS ..........................................$104,900

2014 CATERPILLAR 259D, ID# HUC0183, S/N#FTL00486, 1179 HOURS, CAB, A/C ........................$48,800

2014 CATERPILLAR D7E, ID# HUC0256, S/N TAN01378,910 HOURS ............................................CALL FOR PRICING

2008 CATERPILLAR D6T, ID# HUC0058, S/N SKL00506,5390 HOURS ................................................................$174,800

2013 CATERPILLAR 304ECR, ID# HUC0280, S/NTTN00931, 919 HOURS, CAB, A/C, AUX HYD ..$46,000

2009 CATERPILLAR 12M, ID# MUC0321, S/N B9F00371,5065 HOURS, CAB, AIR ............................................$144,700

2014 CATERPILLAR 289D, ID# HUC0169, S/N#TAW01221, 755 HOURS ............................................$64,400

2014 CATERPILLAR 420F, ID# HUC0152, S/N#SKR03488, 730 HOURS..............................................$101,000

2011 CATERPILLAR 924H, ID# NUC0453, S/NHXC02459, 5365 HOURS............................................$86,900

2014 CATERPILLAR 262D, ID# HUC0104, S/NDTB00936, 95 HOURS..................................................$48,900

Kansas City (844) 845-8814 • Wichita (866) 773-5581 • [email protected] • (316) 943-4211 International

Page 24: Midwest 22 2015

Page 24 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ending Joblessness…

Program Teaches YoungAdults Industry, Fights BlightDETROIT (AP) A group of young adults

is learning about the construction trade andhelping Detroit in its battle against neighbor-hood blight by boarding up vacant schoolsacross the city. About 40 people in the city’s Opportunity

Detroit Youth & Trades Board-Up Programhave spent the summer securing doors andwindows at 23 buildings, the Detroit FreePress reported. The program started in June and employs

workers ages 18 to 24. They earn $9.50 perhour. “The idea was to address blight,’’ Project

Director Rodney Prater told the newspaper.“But the main purpose was to train peoplewho otherwise might have never seen a sawor a hammer, with a long-term goal that theybecome qualified or prequalified apprenticesin the building trades. It’s not just a job. Thiscould easily turn into long-term careers forthem.’’ Detroit has one of the highest jobless rates

in the country. As the city was heading intoits 2013 bankruptcy filing, then-emergencymanager Kevyn Orr wrote to Detroit’s cred-itors that the unemployment rate was morethan 18 percent. Comparably, Michigan’s unemployment

rate was 5.1 percent in August. The Opportunity Detroit Youth & Trades

Board-Up Program provides at least somejobs in the city. “It’s a great program, showing young

adults different things they can do with theirhands, instead of always being in thestreets,’’ said Kierra O’Rear. O’Rear and others in the program spent a

day boarding up Detroit’s former GreenfieldPark Elementary. The city and federal funds cover the pro-

gram’s $850,000 cost to run. Additionalgrant money is being sought.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Southeastern EquipmentCo. Inc. Hires Andy Gray Southeastern Equipment Co. Inc.

announced that Andy Gray has joinedthe company as sales representativeof the Monroe, Ohio, branch. His pri-mary responsibility is selling theequipment lines that the branch repre-sents, which include Case, Kobelco,Kubota and Gradall.“We are pleased to welcome Andy

to Southeastern,” said CharliePatterson, president of SoutheasternEquipment. “His knowledge andexperience in heavy equipment saleswill allow him to hit the ground run-ning on our team, and we can’t waitto see what he is able to achieve.”Before joining Southeastern, Gray

worked as a sales representative at aheavy equipment dealer where hegained valuable experience sellingagricultural and construction equip-ment.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.construc-tionequipmentguide.com.)

Southeastern Equipment Co. Inc. announcedthat Andy Gray has joined the company assales representative of the Monroe, Ohio,branch.

JCB Government Defense Division Relocates to SavannahJCB recently relocated its global

government and defense divisionfrom its worldwide headquarters inthe United Kingdom to its NorthAmerican headquarters in Savannah,Ga. This strategic move comes onthe heels of JCB’s success manu-facturing the high mobility engineerexcavator (HMEE) for the U.S. Army.In 2000, the U.S. Army released

specifications for an extremelydurable backhoe loader that couldtravel at convoy speeds while pro-tecting military personnel. JCB —the leading manufacturer of back-hoes in the world — was able touse existing technology from itsbackhoe loader and high-speedagricultural tractor to closelymatch the Army’s specifications.Following five years of design,engineering and testing, JCB wonthe contract and began building theHMEE. Last year, the U.S. Armyextended the contract until 2018. “We are extremely proud and

honored to build equipment thatprotects those who serve our coun-try,” said Arjun Mirdha, CEO ofJCB North America. “Centralizing

our military expertise in Savannahwill allow us to evolve our HMEEtechnology while engineeringinnovative products for future usewithin the military sector.” The government and defense

team will work to secure new mil-itary and government contracts, aswell as to create new equipmentsolutions to meet the changing

needs of the U.S. armed forces andallied nations. JCB’s NorthAmerican headquarters is locatednear Fort Stewart and HunterArmy Airfield. Proximity to thesetwo bases provides a uniqueopportunity to work with local mil-itary personnel on product devel-opment and testing. Heading the new division is

Chris Giorgianni, vice president ofproduct support and government &defense. A graduate of the U.S. AirForce Academy and decorated AirForce veteran himself, Giorgianniwill utilize his extensive militaryknowledge and unique perspectiveto guide this growing team. “Leading the Global Government

and Defense Division is such an

honor and privilege,” said Giorgianni.“Combining our depth of experi-ence with JCB’s engineering teamand production facility in Savannahwill allow us to engineer, build andadapt equipment for our govern-ment and defense customers.”In addition to Savannah offering

a strategic advantage for the testingof products, it serves as an ideal areafrom which to staff the new divisiondue to the area’s high population ofretired military personnel.“Bringing our Government and

Defense Division to NorthAmerica where the greatest num-ber of military investments aremade, along with the location nearmilitary bases and access to anexperienced workforce, will allowus to obtain future contracts anddrive success within the militarysector, much as we have with ourHMEE product,” said Giorgianni.For more information, visit

www.jcbna.com.(This story also can be found on

Construction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

JCB recently relocated its global government and defense division from its worldwide headquartersin the United Kingdom to its North American headquarters in Savannah, Ga.

Page 25: Midwest 22 2015

constRuction eQuiPment guide • www.constructionequipmentguide.com • october 24, 2015 • Page 25

USED EQUIPMENT SPECIALS

call bobby falcone 630-516-4456 www.pattencat.com

coRPoRate HQ

elmHuRst

635 W. Lake Street

eLMhurSt, iL 60126

Joliet

16822 W. LaraWay rd.

JoLiet, iL 60433

oglesby

590 Mayer St.

ogLeSby, iL 61348

RockfoRd

5055 South Main St.

rockford, iL 61102

Hammond

6400 indianapoLiS bLvd

haMMond, in 46320

1999 CAT 345BL TRACK EXCAVATORSER#: 4SS01156 $32,500AC/HEAT, STRAIGHT TRAVEL PEDAL, 64”BUCKET, 12’6” STICK

2011 CAT 258B3 2AIH MULTI TERRAINLOADERS SER#: YYZ00476 $39,000ROPS, AC/HEAT, 2-SPEED, HYD; COUPLER

2012 CAT 336EL TRACK EXCAVATORSER#: BZY02071 $250,000AC/HEAT, AUX HYDRAULICS, STRAIGHT TRAVEL PEDAL

2012 CAT 12M2 MOTOR GRADER SER#: F9M00102 $277,500ROPS, ENCLOSED CAB, GRADE CONTROL, AC

2008 CAT 953D TRACK LOADER SER#:LBP00239 $170,000CAB, AC/HEAT, GP BUCKET, 19” TRACK

2007 CAT 980H WHEEL LOADER SER#: JMS02813 $162,000EROPS, AIR CONDITIONING, COUNTERWEIGHT, RIDE CONTROL

2012 CAT 336EL TRACK EXCAVATORSER#: BZY00973 $268,750QUICK COUPLER, COLD WEATHER START,TOOL CTRL

2012 CAT 906H WHEEL LOADER/TOOL CARRIERSER#: SDH03034 $65,000EROPS, HEAT/AC, BUCKET/FORKS, AUX HYD,RIDE CONTROL

2013 CAT 279C2 SER# KWB00786 $58,500HYDRAULICS, STANDARD FLOW, 2 SPEED, AC,HYDRAULIC COUPLER

2006 CAT 430E EX4 BACKHOE LOADERSER# EAT00295 $51,265AC, 4WD, EXT STICK, AUX HYDRAULICS, GP BUCKET, RIDE CONTROL

2011 CAT 308DCRSB TRACK EXCAVATOR SN# FYC01780 $79,900ENCLOSED CAB, A/C, AUX HYDRAULICS, RUBBER TRACK

2011 CAT 259B3 2AIH SER# YYZ01299 $45,000QUICK COUPLER, HYDRAULIC HYDRAULICS,STANDARD FLOW, WIDE TRACK, CONTROL, 2 SPD

2011 CAT 420E ST BACKHOE LOADER SER# DJL02211 $69,900EROPS, STICK, EXTENDED, QUICK COUPLER,4WD, GP BUCKET, AUX HYDRAULICS

2008 CAT 305CCR AIR TRACK EXCAVATORSER#: HWJ03191 $35,000CAB AC/HEAT, AUX HYD, POWER ANGLE BLADE,COUNTER WEIGHT

VISIT WWW.PATTENCAT.COM FOR OUR MOST CURRENT INVENTORY LISTINGS.

Page 26: Midwest 22 2015

Page 26 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Link-Belt® Spin Ace®

come to expect from us - along with a minimum swing radius design for better maneuverability at sites where work space is at a premium. Thoughtful redesign of counterweights and boom placement makes them ideal for residential construction, utility work and specialty trenching jobs.

Roomy, redesigned cab

Convenient ground-level

Extended service intervals

3-year subscription to RemoteCARE™ telematics

Your Link-Belt Excavator dealer has the right Spin Ace for your application, along with uncompromising service and support to keep them performing at their best.

*75 X3 and 80 X3 engines are Final Tier 4

Model # Operating Wt. Net hp @ rpm Tail Swing75 X3 Spin Ace 17,400 lbs. 54 hp @ 2,000 rpm80 X3 Spin Ace 54 hp @ 2,000 rpm145 X3 Spin Ace 33,200 lbs. 100 hp @ 2,000 rpm235 X3 Spin Ace

CONSTRUCTION MACHINERY COMPANYwww.cmcky.com

2911 S. English Station Rd.Louisville, KY 40299

502-267-4020866-901-2262

Fax: 502-261-9251

2235 Ragu DriveOwensboro, KY 42303

270-683-2000877-683-2262

Fax: 270-683-3727

267 W. Jay Louden Rd.Carrollton, KY 41008

502-732-4661

HAYDEN-MURPHY EQUIPMENT COMPANY

www.hayden-murphy.com9301 E. Bloomington FreewayMinneapolis, MN 55420-3410

952-884-2301800-352-2757

Fax: 952-884-2293

Page 27: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 27

© 2015 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

YOU’VE GOT A ROCKY ROAD AHEAD

Not using Cat® filters can lead to a mountain of hurt. This guy didn’t use a Cat filter in his Cat machine and now he’s paying the price. What’s worse? He could pay an even bigger price down the road because Cat filters protect like no other. Which is why you should always use them. And if you don’t … you might find yourself stuck between a rock and a hard place. Find out what makes Cat filters so important at ChooseCatFilters.com.

Buy ONE CAT FILTER and GET ONE FREE | Enter to win FREE Cat Filters & Fluids for a year*

Helping Cat machines lead long and productive lives – that’s what we’re built to deliver.

* VOID WHERE PROHIBITED. NO PURCHASE NECESSARY TO ENTER OR WIN. A PURCHASE WILL NOT INCREASE YOUR CHANCES OF WINNING. Please see complete official promotion rules at ChooseCatFilters.com.

Find out what makes Cat filters so important at always use them. And if you don’

s worse? He could pay an even bigger price down the road because Cat filters protect like no otherWhat’ filters can lead to a mountain of hurt. ®Not using Cat

ChooseCatFilters.com.Find out what makes Cat filters so important at t … you might find yourself stuck between a rock and a hard place. always use them. And if you don’

s worse? He could pay an even bigger price down the road because Cat filters protect like no other filters can lead to a mountain of hurt.

ChooseCatFilters.com.t … you might find yourself stuck between a rock and a hard place.

s worse? He could pay an even bigger price down the road because Cat filters protect like no othert use a Cat filter in his Cat machine and now he’This guy didn’

t … you might find yourself stuck between a rock and a hard place. . Which is why you should s worse? He could pay an even bigger price down the road because Cat filters protect like no other

t use a Cat filter in his Cat machine and now he’

. Which is why you should s paying the price.

Helping Cat machines lead long and productive lives –

TER a T FIL LTER and GET ONE FREE Buy ONE CA AT FIL

YOUR CHANCES OF WINNING. Please see complete official promotion rules at ChooseCatFilters.com.VOID WHERE PROHIBITED. NO PURCHASE NECESSARY TO ENTER OR WIN. A PURCHASE WILL NOT INCREASE *

used herein, are trademarks of Caterpillar and may not be used without permission.,” the “Power Edge” trade dress as well as corporate and product identity ellow“Caterpillar Y

TE , CA ATERPILLAR, BUILTT, CA. All Rights Reserved. CA T© 2015 Caterpillar

Helping Cat machines lead long and productive lives –

Enter to win FREE Cat Filters & Fluids for a year|TER and GET ONE FREE

Find out what makes Cat filters so important at

YOUR CHANCES OF WINNING. Please see complete official promotion rules at ChooseCatFilters.com.VOID WHERE PROHIBITED. NO PURCHASE NECESSARY TO ENTER OR WIN. A PURCHASE WILL NOT INCREASE

used herein, are trademarks of Caterpillar and may not be used without permission.,” the “Power Edge” trade dress as well as corporate and product identity

, their respective logos, T FOR IT T, their respective logos, ERPILLAR, BUIL LT FOR IT

Enter to win FREE Cat Filters & Fluids for a year

t th ha at s w wh ha at w we e’ ’r re b bu ui il lt t to d de el l

VOID WHERE PROHIBITED. NO PURCHASE NECESSARY TO ENTER OR WIN. A PURCHASE WILL NOT INCREASE

h b d t’ t’ h –

* Enter to win FREE Cat Filters & Fluids for a year

li iv ve er. r r.

Page 28: Midwest 22 2015

Page 28 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2012 CAT 914G, S/N PDF01727, 144U082, 1553 Hrs ................................................................................................$93,500

2006 CAT 308C CR, S/N KCX01363, 152U050, 3249 Hrs..........................................................................................$49,500

2011 CAT 420E IT, S/N DAN00973, 155U009, 817 Hrs ..............................................................................................$85,250

2012 CAT CS54, S/N C5R00615, 1412U013, 610 Hrs................................................................................................$99,000

2009 CAT 312DL, S/N JBC00684, 142U177, 2235 Hrs ..............................................................................................$82,500 2005 CAT 14H, S/N ASE01214, 158U008, 5734 Hrs ............

....................................................................................$203,5002002 CAT 950G, S/N 4BS00755, 154U013, 5143 Hrs ..............................................................................................$104,500

1998 CAT D6M LGP, S/N 4JN00820, 151U062, 7903 Hrs ........................................................................................$68,500

1977 CAT D8K, S/N 77V09337, 141U110................$33,500

Locations in Iowa, Illinois & MissouriBUY • SELL • CONSIGN • RENT

800-333-5993Bill Musgrave Ext. [email protected]

Corporate Office Cedar Rapids, IA.

Complete inventory & photos at:

www.altorfer.com

2009 CAT 140M, S/N B9M00808, 148U016, 5139 Hrs ................................................................................$121,000

Danella Companies Adopts SmartDrive Safety ProgramSmartDrive Systems, a leader in driving

performance solutions that reduce collisionsand improve fuel efficiency, announced thatDanella Companies Inc., a leader in con-struction services for the utility industry, hasimplemented SmartDrive’s video-basedsafety program across its fleet of nearly 200vehicles. In the first three months followingadoption, Danella saw critical improve-ments in key driver safety indicators,including a 79 percent increase in driverseatbelt usage, 40 percent reduction inspeeding, 33 percent drop in unsafe follow-ing and a 29 percent decrease in handhelddevice usage. Overall, the fleet experienceda 79 percent improvement in its safety scorecomplemented by a reduction in litigationexpenses, better driver retention and greateroperational efficiency, according to thecompany.Danella Companies is a Pennsylvania-

based provider of construction services to abroad range of utility and railroad cus-tomers. In its New York and Connecticutlocations, the company operates a fleet ofjust under 200 vehicles, ranging from smallpick-up trucks, cars and SUVs to tractortrailers, step vans, and dump, box and buck-et trucks. Company leadership advocatedfor the adoption of SmartDrive’s video-

based technology to maximize safety, miti-gate litigation risks and minimize accident-related financial losses.“Having long promoted a culture of safe-

ty at Danella, our deployment ofSmartDrive’s platform further enhances andextends the safety programs we already hadin place, while also exonerating drivers andpositively impacting the bottom line.Additionally, friendly internal competitionamong our drivers to achieve the best safetyscores are testament to their acceptance ofthe program and commitment to continuousimprovement,” said Dave Pancoast, safetydirector at Danella. “Interestingly, we’vefound that the biggest benefit of theSmartDrive system is the driver educationthat comes with it — SmartDrive serves upthe right business intelligence insights we

need to guide our proactive and constructivecoaching.”Like other commercial fleets, Danella

faces a number of issues affecting its bottomline — rising insurance premiums, growingexpenses associated with claims, compli-ance with strict and complex safety regula-tions, and maximizing asset and driver uti-lization. The company’s decision to equipevery vehicle in its fleet — from those driv-en by construction project managers tothose driven by heavy equipment operators— has led to significant safety enhance-ments, which, in turn, have resulted in fewercollisions, reduced litigation costs andenhanced profitability.“Danella’s results — including bettering

its safety score by nearly 80 percent —speak for themselves. The company has

done an outstanding job, effectively andproactively engaging drivers to ensure theirbuy-in and enthusiasm for the SmartDriveprogram and the resulting ongoing safetyenhancements,” said Steve Mitgang, CEOof SmartDrive. “The Danella team is a stel-lar example of how to maximize the fullvalue of the SmartDrive solution, fromvideo data capture, to expert risk analysisand scoring, driver involvement, coachingand continuous program refinement.”SmartDrive is a video-based safety pro-

gram that identifies unsafe driving with anextensible platform, integrating video, vehi-cle data, audio and driving data for a unifiedand comprehensive view of risk. The pro-gram automatically offloads footage forexpert review and analysis, and prioritiza-tion for coaching. This saves fleets time andresources, which can then be focused ondelivering increased value to their cus-tomers through on-time delivery, accuracyand better service.For more information about Danella, visit

www.danella.com.For more information on SmartDrive

Systems, visit www.smartdrive.net. (This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

“The Danella team is a stellar example ofhow to maximize the full value of theSmartDrive solution...”

Steve MitgangSmartDrive

Page 29: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 29

Page 30: Midwest 22 2015

Page 30 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Custom Made Products Co.Humboldt, IA

(800) 760-7871 Call Anytimewww.gncmp.com

100+ Scrapers on Hand at 16 LocationsFOR SALE OR FOR RENT

Locations: Humboldt, Bayard, De Soto, Iowa Falls, Liscomb, Manchester, Britt, Osceola, Sac City, Woodbine, Readlyn, Chariton, Fremont, Newton, Wayne, NE & La Plata, MO

GRADERSArt’s-Way Graders, (New & Used) ................................................CallJohnson Graders (New & Used)....................................................Call8’-16’ With & Without Rear Steer

ASHLAND18yd Ashland I-180 TS2s, (New & Used) ....................................Call17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call13yd Ashland I-130 TS2s, (New & Used) ....................................Call13yd Ashland I-130 XL2s, (New & Used) ....................................Call11yd Ashland I-110 TS2s, (New & Used) ....................................Call11yd Ashland I-110 XL2s, (New & Used) ....................................Call9 1/2yd Ashland I-950s, (New & Used) ........................................CallAshland Groundhog GH2500, (New & Used) ................................Call

GARFIELD12yd Garfield Model 1150s, (Used)..............................................Call13yd Garfield 1350s, (New & Used) ............................................Call8yd Garfield Model 850s, (New & Used)......................................Call5yd Garfield Model 550s, (New & Used)......................................Call

HOLCOMB8 yd to 18 yd, (Dolly Wheel or Direct Mount - New & Used) ........Call

BIG DOG8 yd Big Dogs, (New & Used) ......................................................Call6 1/2 yd Big Dogs, (New & Used) ................................................Call5 yd Big Dogs, (New & Used) ......................................................Call12’ Feedlot Box Scrapers..............................................................Call10’ Feedlot Box Scrapers..............................................................Call12’ Box Scrapers ..........................................................................Call10’ Box Scrapers ..........................................................................Call8’ Box Scrapers ............................................................................Call

IRONWOLF8-12 yd ..........................................................................................Call

LEON10-13 1/2 yd ..................................................................................Call

ROWSE7 yd Rowse Model 7002 & 7004 ..................................................Call5 yd Rowse Model 7002 & 7004 ..................................................Call3 yd Rowse Model 3002................................................................Call

MISCELLANEOUS1 1/2 yd, 3 yd & 4yd Durabilts, (New & Used) ............................Call3/4 yd G&A Mini Scraper, (New & Used)......................................Call

18 yd AshlandI-180 TS2s(New & Used)Call

13 yd Ashland I-130 XL2s(New & Used)Call

We Will Not Be Undersold! Free Delivery!

*to most areas

LeaseTo Own

Page 31: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 31

Vermeer D40x55 S3 Drill Offers Increased Force, SpeedThe Vermeer D40x55 S3 Navigator hor-

izontal directional drill (HDD) adds morepunch and drilling force over its predeces-sor — the D36x50 Series II NavigatorHDD — to offer contractors premium per-formance, class-leading cycle times andflexible rod options, according to the man-ufacturer. “Contractors considered the D36x50

Series II as one of the most versatile drills inthe industry, and the D40x55 S3 is built onthis versatile platform,” said Jon Kuyers,senior global product manager, under-ground, of Vermeer. “This machine packsmore torque and pullback force into thesame footprint, offering contractors amachine that can efficiently complete awide range of work ranging from 2 to 16inches in diameter.”Speed, simplicity and sound are the trade-

marks of the Vermeer S3 generation ofdirectional drills, and the D40x55 S3 doesnot disappoint. With 40,000 lbs. (177.9 kN)of thrust/pullback and 5,500 ft.-lb. (7,458Nm) of rotational torque, the D40x55 S3offers a more than 10 percent increase inthrust and rotation over its predecessor, theD36x50 Series II — helping to maximizeproductivity.A 104 dBA guaranteed sound power level

and an operator ear rating of 82.9 dBA makethis drill significantly quieter than its prede-cessor — which makes for a quieter work-ing environment with less neighborhooddisturbance and easier communicationamong the crew. The D40x55 S3 features acarriage speed of 188 ft. per minute (57.3m/min) — which is 7 percent faster than itspredecessor — helping contractors install

more linear ft. per day. Versatility is at the heart of the D40x55

S3, allowing contractors to select the idealdrill configuration for the specific need.They can choose from three drill rodoptions: 10 ft. (3 m) rod in 2.38 in. (6 cm) or2.63 in. (6.7 cm) diameters and 15 ft. (4.6m) rod with a 2.63 in. (6.7 cm) diameter. A 140-hp (104 kW), liquid-cooled, tur-

bocharged diesel John Deere 4045 4.5L TierIV-compliant engine delivers robust power,while a redesigned excavator-style climate-controlled cab allows operators better visi-bility, more legroom and greater comfort inunfavorable climate conditions.A common control system benefits drill

operators with the ability to operate a vari-ety of Vermeer drills and lessens the timeneeded for training. This includes a digitaldisplay, improved onboard diagnostics andcommon joystick controls. The systemdesign uses a power distribution modulethat reduces the amount of wiring and fusesfor greater reliability. A DigiTrak Aurorainteractive, full-color touch-screen displaydelivers real-time, easy-to-view locationinformation, bore plans; and more to helpincrease operator productivity.An onboard self-diagnostic system

empowers contractors to make machineadjustments when required and helps tomaximize productivity. The InSite Fleetremote monitoring system comes standardon the D40x55 S3 and is available now. For more information, visit www.ver-

meer.com. (This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

With 40,000 lbs. (177.9 kN) of thrust/pullback and 5,500 ft.-lb. (7,458 Nm) ofrotational torque, the D40x55 S3 offers a more than 10 percent increase inthrust and rotation over its predecessor, the D36x50 Series II — helping to max-imize productivity.

Page 32: Midwest 22 2015

Page 32 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Guests Test Their Skills During Excavator Basketball

Ray Roland (L), CEO,Roland MachineryCo., has a few laughswith Allen White,owner of Allen WhiteExcavating.

(L-R): Miles Roland and William and Henry Pennell, all grand-sons of Roland Machinery Co. CEO Ray Roland, and theirfriend, Jack Reyhan, have fun checking out this KomatsuPC360 LC excavator.

Matt Roland (far R),president RolandMachinery, welcomes(L-R) Brian Vogt, Edand Cindy Kestersonand Russ Carlstrom, allof Petersburg Plumbing& Excavating, to thecustomer appreciationBBQ dinner.

Mike Gidaspow (L), director of sales and marketing cen-tral region of Komatsu America Corp., and Terry Degroot,Halverson Construction Co. Inc., attend the event.

ROLAND from page 20

Page 33: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 33

2013 Deere 350G LC - $188,0003,600 Hrs, Original paint, 1 Owner, Hydraulic thumb,

Quick coupler, Auxiliary hydraulics, Very clean & straightmachine from good home. Rent/Lease or Buy.

1998 CAT D9R w/631P Pull Scraper Priced as a package - $245,000

7TL Series. 0 Hr Engine. Rigged to newly converted/rebuilt 631 pull scraper. Excellent UC. Ready to go.

2011 CAT 349EL - $245,0004,600 Hours, Original paint, 1 Owner, Quick coupler,

Service history, Very clean and straight machinefrom good home. Rent/Lease or Buy.

2012 CAT D6N LGP - $165,0003,800 Hours, GPS Accugrade ready. Erops, Sweeps, A/C,Di� steer, Aux hydraulics, Rear drawbar, Cat System 1

UC, 1 Owner, Excellent condition. Rent/Lease or Buy.

Ph: 563-872-4112 | Fax: 563-872-5058 | [email protected] | 21582 Hwy 62, Bellevue, Iowa 52031 | www.jjscheckel.com

VISIT OUR WEBSITE FOR DETAILED PHOTOS AND DESCRIPTIONS! WWW.JJSCHECKEL.COM

CLEAN, WORK-READY EQUIPMENT IN IOWA - WE OWN WHAT WE ADVERTISE!

RENT BUY!

ORRENT BUY!

OR

2009 CAT D6T LGP - $154,0005,600 Hours, New system 1 rails, Very clean, Verystraight machine. Sweeps. Mechanically correctmachine we ran ourselves. Rent/Lease or Buy.

RENT BUY!

ORRENT BUY!

OR

RENT BUY!

ORRENT BUY!

OR

RENT BUY!

ORRENT BUY!

ORRENT BUY!

ORRENT BUY!

OR

2012 CAT 312 EL - $108,000Only 1,100 hrs, Original paint, Thumb, 34” Bucket,

Pattern changer, Auxiliary hydraulics, Fully serviced.Super clean condition. Rent/Lease or Buy.

RENT BUY!

ORRENT BUY!

OR

2014 CAT 316EL - $110,0003,800 Hrs, Original paint, 58” Bucket, Pattern

changer, Fully serviced, Super clean condition. Rent/Lease or Buy.

RENT BUY!

ORRENT BUY!

ORRENT BUY!

ORRENT BUY!

OR

RENT BUY!

ORRENT BUY!

OR

NEWCONVERSION!NEWCONVERSION!

2002 CAT D9R - $180,000ABK Series. New trackgroups, Good UC, SU Blade,

Rear Cwt, Fresh paint, TA2 report available,Mechanically correct machine we ran ourselves.

2006 Deere 200D LC - $84,0005,900 Hours, Original paint, 9’6” Stick, Long and

wide undercarriage, 48” Bucket, A/C, Nice machine.Rent/Lease or Buy.

2011 CAT 420E IT - $72,000Original owner, Only 1,900 hrs, 4WD, Full options,

Auxiliary hydraulics front + rear, Tool carrier, GP bucket.Deluxe enclosed cab. Extendahoe, Quick coupler.

2006 CAT CS563E - $62,000Original paint. 84” Vibratory smooth drum.

Enclosed cab, A/C + heat, Very well maintained.4,500 Hours. 27,500 lb operating weight.

2011 CAT 336EL - $212,0001,900 Hrs, Original paint, 1 Owner, Service history,Very clean and straight machine from good home.

Best price in the market. Rent/Lease or Buy.

SSR SCHECKEL SERIES REMANMACHINES IN PROGRESS NOW!

11R 7PZ Series10R’s AKT Series

7TL & ABK SeriesWe also perform Cat 777D, Cat 992 D/G & Cat 16 G/H Remans on a regular basis. Custom builds performed to meet customer’s exact requirements, specs, and budgets. Call 563-872-4112 or email [email protected] for a brochure!

The highest quality, most complete, most detailed, proprietary reman program in the world!

USED AND RECONDITIONEDPARTS HOTLINE

Genuine OEM CatFull availability of used CAT parts, 50% o� list, carriers, housings, gears, etc.Also huge selection of attachments and components in stock.If we don’t have it, we will �nd it! Parts locating service.

Call Matt Meyer 563-872-4112

GET INFORMATION ON ANY MACHINE VIA EMAIL!

Detailed Inspection ReportTA2 Pressure Testing ReportECM Download ReportService History (when available)Detailed Pictures

Call 563-872-4112 or [email protected]

2007 Deere 270D LC - $82,0007,200 Hours, Original paint, Quick coupler,

Pattern changer, Nice machine. Rent/Lease or Buy.

(DUBUQUE) BELLEVUE, IOWAWWW.JJSCHECKEL.COM

563-872-4112

J.J. SCHECKEL RENTSNo Borders, No Boundaries. Partner with us!

RENT BUY!

ORRENT BUY!

OR

1994 CAT 992D - $470,000Fully refurbished, $352,000 work order just spent.

2,000 Hour main components. New tires! Call for documents.

REFURBISHED!REFURBISHED!

1 OWNER!1 OWNER! RENT BUY!

ORRENT BUY!

OR

2010 CAT CP56 - $88,000Original owner & paint. 84” Vibratory pad foot drum.

Enclosed cab, A/C, Front blade option. Very wellmaintained. 3,900 Hours. 27,500 lb operating weight.

RENT BUY!

ORRENT BUY!

ORLEASE BUY!

ORLEASE BUY!

OR

Your source for Nationwide Rentals:

Discounted Rent Rates

Financing

Quick Mobilization - Delivered to your site, set up, and ready to go. Cost E�cient, Expand your capabilities with our equipment!

2010 CAT 980H - $159,00010,800 Hrs, Original paint, A/C, Auto shift, Ride control,

Good rubber, GP bucket, New cutting edge, Wellmaintained, Fully serviced. Lease or Buy.

2012 CAT 320EL - $142,0002,200 Hours, 46” bucket, 9’6” stick, A/C, rear view

camera, Aux hydraulics available, Very nice machine, Fully serviced, Excellent condition. Rent/Lease or Buy.

RENT BUY!

ORRENT BUY!

OR

2011 CAT 324EL - $155,000 Only 2,100 hrs. Fully loaded, Auxiliary hydraulics.

Quick coupler. 9’9” stick, long and wide UC.Extra clean, single owner! Rent/Lease or Buy.

WWW.JJSCHECKEL.COM(DUBUQUE) BELLEVUE, IOWA

WWW.JJSCHECKEL.COM ELLEVUE, IOWA

RRRREENTNTOORT

om.cell.cckjschesales@jjjscheall 563-872-4112 or emaC

esturicDetailed Pv(when ay oriste HvicerS

teporwnload RECM Doeporesting RTe essurrA2 PTTA

eportion RnspecDetailed I

RRt

o ellen

igged tc. Ex

llaperr. Exebuilt 631 pull scr

nginer

gg E

. Rg

. 0 Hr Eeries7TL S Priced as a package - $245,000

D9R w/631P Pull Scraper / CAT 1998

NCOCOONVNVVE

NVVE

omilall 563-872-4112 or ema

ailable)v

teportepor

RREENTNTOORT

y UC R

RR.o got UC. Ready t

o newly c ed/tervon - $245,000

P Pull Scraper p $

NNEWNNEEWE SSSIOIOON!ERR

W

t mac esh pain

ecorrally c

MechanicT

ou, t

grr, FwtRear C Cwt T

g ackew tr. NeriesABK SD9R - $180,000CAT 2002

RREENTNTOORT

y S

RRan ourselve rmachine w

aigh w. Sew sy

t machineghi

str

i, Nours5,600 H

2009 CAT D6T LGP - $

E

YYREREENT

BUYY!NTOORT

BUN

U RE

RE

EN

Y UE

U

RREENTNTOORT.esan ourselve r hine w

epor ,ailablevt ap

A2 rups ,ladeood UC, SU B, Gp

A

D9R - $180,000

RRely

c, Exwnerr, Ex UC, 1 Odryux h, Aeerr, Ai� stD

, GPS Aours3,800 H2012 CAT D6N LGP - $

.ease or Buy y.ally c

ent/LR. es selveeps tecorry c

e

y clean, . Mechanic

ll

lw

yerVy

154,000erV, ailsem 1 rew syst

, l

2009 CAT D6T LGP - $

RREENTNTOORT

gli

.ease or Buy y.yst

ent/LRondition. t cellenem 1

eepsy

t S a, Cp

bops

wbarr, C a, Rear dready

aulicsugr

dr, A/C,

Sw, S

r. Ey

drade rcc, GPS A

165,0002012 CAT D6N LGP - $

B B UN

URREENT

B YYY!NTOORT

U UREE T

UN

U B

RRease o

aigy clean and strent/L

R

/L. om good home

y Rfr

gy

riginal painerV

p l , y

d y, ore histvicerS

, Qwnerr, Q, 1 Ot V

349EL - $24, Oours4,600 H l CAT 2011

E

YYT

RREENT

BUYY! BUN

U R

RE

EN

Y UE

U

E

YY RREENT

BUYY!NTOORT

BUN

U R

R

EN

Y UE

U

RR

g d

RR

. or Buyht machine

oupler

,p hi

r, 5,000

uick c

, Q ,

k

E

YY RERENENT

BUYY!NTOORT

BUN

U RE

R

EN

Y UE

U

ent/LR. ete in the markaighy clean and str

est pric

i h Bt machine

riginal paing

y

i

pi herV

wner, 1 Ot2011 CAT 336EL - $

, O1,900 Hrs l

R R

E

YYT

REREENT

BUYY! BUN

U RE

RE

EN

Y UE

U

RR

RR

y Q

RE

YY RREENT

BUYY!NTOORT

BUN

U R

RE

EN

Y UE

U

.ease or Buyom good home

/L g

B.

L

yt machine fr

,y

y,ore hist $212,000

vicer, Serr, S

h

E

YYT

REREENT

BUYY!

wner! a clean, single ooupler

trEx stick

y 9’9”ully loade. 9’9” ” stick

i kp

i r. 9’9”

nly 2,100 hrsuick c

lQy

i k

” stick

2011 CAT 324EL - $155,000. F ll l d O l hrs

BUN

U RE

RE

EN

Y UE

U

RR

RR

R R

E

YY REREENT

BUYY!NTOORT

BUN

U RE

R

EN

Y UE

U

R R

E

YYT

REEENT

BUYY! BUN

U RE

RE

EN

Y UE

U

t cellenc, Exy

edvicully serFaulics adry

ux ha, Aamerc

buc ”2012 CAT 320EL - $142,000

, 46” ” buck bours2,200 H ” buck

.ease or Buy, long and wide UC.

ent/L

BR g

/L R

ed y hy .aulics L - $155,000

dr

ly d

y i

duxiliar

, h, A

l

d

RR

y R

RR

Rully ser

ri , Fchangerr, F

2014 CAT 316EL - $110,000, O3,800 Hrs

RE

YYT

RREENT

BUYY! BUNT

U R

RE

EN

Y UE

U

REREFEFFUURBRB.ease or Buy

y nicent/L

Rondition. t c

, e machiney /L

erV, ailablevaulics aear view, A/C, r stick

’ ”

20EL - $142,000, 9’6” ” stick

ket k

” stick

k

.ease or Buyuper clean c

ent/L ser ondition.p

Buy, S

ginal pained

Svic

pd

pi

erntta, Petuck AT 316EL - $110,000

B, 58” ” B

ktg

l pain

BIBISSHEDED!HI

yR ease

u ent/L

yRyy h

ondition. Ruper clean c

ern changerS

g l

, Faulicsdrriginal pain

y

duxiliar

p h, A

S r, A

nly 1,100 hrsttaP

, 2012 CAT 312 EL - $108

humbT, tg ili

h b, Oy , h

l O l h

LE EA

U UYYE LLEEASAS

BUYY!OOR OE

BUE

U L EA

BASE A

BUS

ent/LR. om good homey hy

machine froupler V, aulicsdry

y

d h

riginal painuxiliar

h, A

g pilip

hi fr, Auick cQ

, wnerr, H, 1 Otg A

2013 Deere 350G LC - , O3,600 Hrs l

. or Buyully ser .edvicy B

,etuck 8,000

B 34” ” B

k ,

1 1 1 OW OW WNE NER ER R!

RR.ease or Buy

aighy clean & strt/L

y B

t

y L

yerV

,aulic thumb - $188,000

dr ,

l hy

, H

d

ease ern changer

ent/L g

R g

/L, N

g h

riginal pain

R r, Nic

p NttaP

2007 Deere 270D LC - $82,000, Oours7,200 H l

RE

YY RREENT

BUYY!NTOORT

BUN

U R

RE

EN

Y UE

U

RRent/

arriageR

g , 4rigina

R

4cwide under

g 2006 Deere 200D LC - $84,000

, Oours5,900 H

.ease or Buy. e machine

oupler ain Nic

,

r, D LC - $82,000

uick c ,

l, Qt Ni

k

E

YY RERENENT

BUYY!NTOORT

BUN

U RE

RE

EN

Y UE

U

p 48”

, car

.ease or Buyent/L.e machine

ong and , A/C, Nicetuck

al pain B

48” ” B

p B

g and e hi

200D LC - $84,000, Ltick

, d S, 9’6” ” S

kt p

” B

l

50% o� listailabilitvull aF

enuine OEM CG

Cour main c2,000 H

ully refurbished1994 CAT 992D - $470,000

y 2 0

f b h dF

p!

, , housingsy of used C T par

iersr, car, ts par

, AAT par

housingsailabilit

taenuine OEM C

.tsumenor docomponen

all fCes!

der just spenew tir. N

j itsp

docour main c

.t N

AT 992D - $470,000ork or

,d , $352,000 w

k d

$352,000 w

d

p GP b k

VISIT OUR WEBSITE FOR DETAILED PHOTOS AND DESCRIPTIONS! WWW.JJSCHECKEL.COMease

utting L

g . edvicully ser, Ftainedmain

L

ew c, Net, GP buckg

briginal pain

ubberr, GP buckood rGo shif

2010 CAT 980H - $159ut, A/C, Atg

h f, O10,800 Hrs l

g B

VISIT OUR WEBSITE FOR DETAILED PHOTOS AND DESCRIPTIONS! WWW.JJSCHECKEL.COMendahoet. Exabe enclosed c

yy helux

D

ool cTnly 1,900 hrs

, earr, t + ronaulics fr

Tdrriginal o

y

y duxiliar

hA

, 4WD f

2011 CAT 420E IT - , Ownerr, Og

lil hO l

MACHINES

.e or Buy edge ellW,

,oltronide c 9,000

, Rt f

d

f

p GP b k

g E

VISIT OUR WEBSITE FOR DETAILED PHOTOS AND DESCRIPTIONS! WWW.JJSCHECKEL.COM. ouplerr. uick c, Qendahoe

.et, GP buck

iull options

arrierr, GP buckool c,

$72,000, F, 4WD

,ll

S IN PROGRESS NOW!

. 27, t b

ours. 3,900 Htainedmain 27 onr, A/C, F

wner & painab

p A/C Fnclosed c

b

riginal oEg

l V. 84”

2010 CAT CP56 - $88,000t

d ”O l

VISIT OUR WEBSITE FOR DETAILED PHOTOS AND DESCRIPTIONS! WWW.JJSCHECKEL.COM. 27,500 lb operours4,500 H

, A/C + riginal pain

ab

A/ nclosed c pbE

. 84”2006 CAT C

tg d

”O l

.teighy w

ting w

a ,500 lb oper lade option. elly

erV

y pad f p

500 lb

V

um.oot dr 6 - $88,000

y p i

ortaibr

, d fV

b

all Matt Mey

VISIT OUR WEBSITE FOR DETAILED PHOTOS AND DESCRIPTIONS! WWW.JJSCHECKEL.COM.teighting w

y wa 500 lb oper

.tainedy smooth dr

ell main

y

erV, t, A/C + heaum.

ll main

S563E - $62,000ortaibr

, h dV ”

b

Cting serts locaarPt ha’e donf wI

omponenand clso huge selec

d A

.c, etgears, car

er 563-872-4112

VISIT OUR WEBSITE FOR DETAILED PHOTOS AND DESCRIPTIONS! WWW.JJSCHECKEL.COM

all Matt Mey. evicting ser

e will �nd it! , we itvt ha.ockts in st

elecomponen

ts ttachmention of a

, , housings, car

563-872-4112 Ph:

563-872-5058 | sFax:| urchofor a br

563-872-4112 or emaementsquirer

formeerbuilds pema16 G/H R

form Cere also pWWe also p

el.com sales@jjschecke!ur

om .cell.cckjscheil sales@j jjsche563-872-4112 or emaall . Cnd budgets, ass, accse, spss, sp

t acs ex xac’’s exomeret custo med tformeom ust. Cr basis s. Cegulans on a rema

at at 992 D/G & C, Cat 777D D, Cform Cieser7TL & ABK S

ieserT SAK0R’s1ieserZ S7P1R1

vue Belle | 21582 Hwy 62, , Belle

wa 52031 | www Io,, Iovuequipment! our e

nd y, Expa�cientt, Expaost EC. o goy teaddy tnd r, aupp, a

uick Mobilization - DQ

inancing F

d Rent RateDiscounte

el.com.jjscheck w w.jjscheck

pabilities with aour cd y your c

, set ee, set our sito yd teerelivuick Mobilization - D

sd Rent Rate

Page 34: Midwest 22 2015

Page 34 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Loos Retires From OAIMA After Decades of Service

Maralynn Loos takes the hot seat while Patrick Jacomet, OAIMA executivedirector, recounts fond memories and humorous times working together.

(L-R): Dick Martin and Ron Watson, both of Watson Gravel, arejoined by Bowser-Morner Inc.’s Katherine Beach; Brian Bottoms ofWatson Gravel Inc.; Monte Yates of Barrett Paving Materials; andGraig Carlson of Mine Equipment Design.

Wyandot Dolomite Inc.’s David Wolfe catches up with Lisa Dunn, Maralynn Loos and RickDunn.

Patrick Jacomet was pleased to seeMaralynn’s daughter, Meghan Schofield,in from San Francisco for the festivities.

Lakeside Sand & Gravel’s Ben Kotkowski andOhio CAT’s Linda Meier take part in Loos’ssendoff.

The Ohio Aggregates & Industrial MineralsAssociation (OAIMA) held a surprise retirementparty for long time Executive Assistant,

Maralynn Loos after the association’s recent BoardMeeting. Loos has been with the association since the1960s and has worked with five executive directorsand 34 association presidents. According to PatrickJacomet, the association’s current executive director,Loos’ contributions to the association over the yearshave been immeasurable. Those feelings were echoedby a number of association members as they took to thepodium to relate anecdotes about their experienceswith Loos and her can-do, no nonsense approachtoward getting things accomplished. AssociationLegal Counsel, Brian Barger, Eastman & Smith Ltd,read proclamations of Loos’ accomplishments from theOhio Congress and Ohio Gov., John Kasich. During the event, Loos indicated that this year’s

OAIMA Annual Meeting & Trade Show, scheduled forNov. 12 to 13 would be bittersweet as it would be thelast event for the association in which she would playan active part.Appropriately, the party was held at the Hilton

Columbus of Easton, where the OAIMA AnnualMeeting & Trade Show has been conducted since thehotel’s opening. According to hotel management, the2000 OAIMA annual meeting and trade show was thehotel’s first trade show event and Loos played a keyrole in the selection of the hotel for the event.As well as association staff and members from all

over Ohio, Loos’s daughter, Meghan Schofield came infrom San Francisco to wish Loos all the best. The Ohio Aggregates & Industrial Minerals

Association is Ohio’s trade association serving themining operations, with the exception of coal withinthe state. Commodities supplied by its membershipinclude natural and manmade construction materialssuch as a variety of aggregates, salt, clay, shale, gyp-sum, building stone, lime, cement, and recycled con-crete.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.construc-tionequipmentguide.com.) CEG

Page 35: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 35

800.392.2686

YOUR SOURCE FOR

SALES AND RENTALS CRAWLER TRUCKS, STUMP CUTTERS

AND FORESTRY MULCHERS

Page 36: Midwest 22 2015

Page 36 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

For all your equipment needs Clean, well maintained rental fleetExtensive inventory of new and used equipment

Contact the Southeastern Equipment location nearest you today!

Kentucky

Michigan

Ohio

TION EQUIPMCCONSTRU

NTETION EQUIPM

Extensive inventor Clean, well maintained rental fleet

For all your equ

y of new and used equipmentExtensive inventor Clean, well maintained rental fleet

For all your equ

y of new and used equipment Clean, well maintained rental fleet

ipment needsFor all your equ

E

ipment needs

ORMAND

Hydro excavators Sewer trucks

ood chippers W Pavers Stabilizers Recyclers Chipspreaders Asphalt distributors Street sweepers

EORMAND

Loader backhoes

Excavators

Wheel loaders

Compact excavators

Compact track loaders

Hydro excavators

HIGH QUALITY USED EQUIPMENT

Lenny Mattern 701.298.1730

Bill Bauer701.298.1767ButlerIRON.com

MJ003408

MA16776

MA21114

MB20732

MJ003041

MJ003450

USED EQUIPMENTHIGH QUALITY

USED EQUIPMENTHIGH QUALITY

85% CA2011 CA

B2010 140

NEW, UTV25 R17.5SB, TIONSCUNF4 & ASEB$200,000...HRS 6122 DWAAWM2010 160

@ 98% UTV24 R 14.00S, BRIPPER, TIONSCUN & 3 FASEB

$135,000 ............HRS7966 M2008 140

AININGMER85% /C @ UER, LK COUPCKET W/QUICUBT 48” CAAT 48”

$280,000...... 2,337 HRSEL T 3362011 CA AT 336

UTIRES 1424 VT, TIONSCUN & 4 FASEB$150,000..............HRS2137 M2010 140

.comNROIButler 701.298.1730Lenny Mattern

DOZER BMU2010 CA

AININGMREUS LP50% /C UDOZER, USHOES, KCTI SHANK RIPPER WITH 2 SHANKS, 24” TRALLTI SHANK RIPPER WITH 2 SHANKS, 24” TRAMU

$465,000.................HRS5359 T8D2012

701.298.1767Bill Bauer

701.298.1730Lenny Mattern

AININGM/C 50% REUE, DALDOZER BSUTI SHANK RIPPER WITH 2 SHANKS, LMU

$305,000..........2,815 HRSE7DT 2010 CA AT

The Construction Marketing Association (CMA)announced a national survey regarding 2016 marketing plansand priorities, including budgets and the most effective mar-keting tactics. In addition, CMA will host a webcast to pres-ent the results of the survey on January 21, 2016.

“Marketing in the construction industry is changing rapid-ly and very exciting,” said Neil M. Brown, CMA chairman.“Our national survey and webcast will identify the state ofmarketing, along with priorities for the coming year andbeyond.”

To register for the free 2016 Construction MarketingOutlook Webcast, visit www.constructionmarketingassocia-tion.org/CMI_Events.cfm.

To take the 2016 Marketing Outlook Survey, visitwww.surveymonkey.com/r/2016ConstructionMarketingOutlook.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-

mentguide.com.)

Construction Industry…

CMA AnnouncesMarketing OutlookSurvey, Webcast

Page 37: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 37

SAVE TIME • SAVE MONEYSAVE LABOR • SAVE OIL

• No tools required

• No expensive hardware needed

• No more rags stuffed into hoses

• No more messy plastic caps

• The ultimate contamination

control tool

• One hand installation

• Eliminate hydraulic

oil spills & clean up

• Quick installation

& ease of usage

• Safe for personnel & environment

• Industry acclaimed

• 100% Made in USA

For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com

INTRODUCINGFlangeLock Tool Boxes

4 Tool Boxes AvailableAll Include Slugs and O'Rings.

TM

1998 CAT 980G: EROPS HEAT AND A/C, 4SPD POWERSHIFT TRANS, HALF STEER, 6YARD G.P BUCKET, FLOAT OPTIONS,29.5X25 RADIAL TIRES ................$69,5002 AVAILABLE

1999 TEREX TA35 OFF HIGHWAYTRUCK, 6X6, ARTICULATED-TRUCK, 35TON, HEAT & A/C, 26.5-26TIRES@70%, DETROIT 60 SERIES 350HP, HORSEPOWER: 350, CAPACITY: 35TN, S/N: A77XXXXX ..............$49,500

2006 DEERE 624J, 102" WIDE BUCK-ET, JRB QUICK COUPLER, 4 SPEEDPOWERSHIFT TRANS, JOYSTICKCONTROLS, HOURS: 12, S/N: 598XXX,STOCK NUMBER: 15I ............$69,500

2011 MAGNUM MMG55FH GENERA-TOR, 59 KVA/ 47KW, 208/480 VOLTS3 PHASE, 120V OUTLETS, JOHNDEERE DIESEL, 315 GALLON FUELTANK, S/N: 5220 ..................$15,900

2000 PARKER 1000X625 JAWCRUSHER, CAT POWER 3306, 6X13VIBRATING GRIZZLY FEEDER, HOP-PER EXTENSIONS ................$115,000

2002 CAT 308C CR, PRICE REDUCED,5 FT 6 IN STICK, AUX HYD, DOZER,A/C. OPTION FOR BOLT ON RUBBERPADS, S/N: 00944, STOCK NUMBER:15I ..........................................$39,500

1999 MOXY MT40B OFF HIGHWAYTRUCK

2006 EXTEC 42X32 CRUSHER,CATERPILLAR 3306, 6 FT X 16 FT FDR,HOPPER WINGS, 42 IN. X 30 FT FRTDISCH FOLDING CONV, TRI/A CHAS-SIS, S/N: 4312 ....................$142,500

2007 VOLVO L110E, EROPS HEATAND A/C, Q/C BUCKET, 4 YARD G.PBUCKET MICHLIEN 23.5X25 TIRES @70%, VERY TIGHT MACHINE, S/N:61047 ....................................$89,500

2005 DEERE 744J WHEEL LOADER,CAB HEAT AND A/C, RIDE CONTROL,5.5 YARD G.P BUCKET, BACK UPCAMERA, S/N: 597XXX ........$79,500

2000 TRAIL KING 55 TON TRAILER,DETACHABLE NECK; 255/70R22.5TIRES; TRI AXLE; 55 TON TRAIL KINGTRI AXLE, 3RD AXLE LIFT, COVEREDAXLES, 102" WIDE 22' WELL, AIRRIDE ......................................$36,500

2015 PITTS CONTENDER TRAILER,DETACHABLE NECK; WOOD FLOOR;2015 PITTS CONTENDER 55TON LOW-BOY, 26' WELL 8.5' WIDE, TRI AXLE,OUTRIGGERS, NON GROUND BEARINGNECK, BOOM WELL, 3RD AXLE LIFT,ALLUMINUM WHEELS, SUSPENSION:AIR RIDE ................................$59,500

1998 CAT D6R LGP DOZER CRAWLER,REMAN TRANSMISSION, EROPS HEATAND A/C, STRAIGHT BLADE W/TILT,36" PADS, 50% U/C, SEALED LUBETRACKS, S/N: 9PN-00725 ......$57,500

2005 VOLVO L180E, EROPS, HEAT &A/C, 4SPD POWERSHIFT, 26.5X25TIRES AT 60%, ORIGINAL PAINT, 5YARD GP BUCKET. CLEAN TIGHT, S/N:7076........................................$89,500

1999 LEDWELL BEAVER TAIL TRAILER,WOOD FLOOR; 255/70R22.5 TIRES;ALUMINUM WHEELS; FIXED TRI AXLE;FIXED NECK; HYDRAULIC TAIL; 40 TON3 AXLE, AIR RIDE, HYDRAULICBEAVER TAIL, 48'X 8'6" ..........$29,500

Page 38: Midwest 22 2015

Page 38 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Allis Chalmers Forty-Five Grader, 1:50 Scale ............................$120

Allis Chalmers HD-21 Dozer, 1:50 Scale ......................................$100

Allis Chalmers TS-300 Motor Scraper, 1:50 Scale......................$100

Atlas 1704C Excavator, 1:50 Scale ..................................................$90

Barber Greene 260C Wheeled Paver, 1:50 Scale........................$185

Bobcat S530 Skid Steer Loader, 1:25 Scale ..................................$45

Bobcat S570 Skid Steer Loader, 1:25 Scale ..................................$45

Bobcat T550 Track Loader, 1:25 Scale............................................$60

Bobcat 743B Skid Steer Loader, 1:25 Scale ..................................$40

Bobcat 7753 Skid Steer Loader, 1:25 Scale ..................................$45

Bucyrus Erie 22B Cable Backhoe, 1:50 Scale ............................$250

Case 1102 Vibromax Roller, 1:35 Scale ..........................................$75

Case CX210C Excavator, 1:50 Scale ..............................................$50

Case 330D Articulated Dump Truck, 1:50 Scale ..........................$50

Case 580 ST Backhoe/loader, 1:50 Scale ....................................$100

Caterpillar 140H Motor Grader, 1:50 Scale ....................................$75

Caterpillar 215 Excavator (NZG), 1:50 Scale................................$100

Caterpillar 325L Excavator (NZG), 1:50 Scale ............................$160

Caterpillar 340D L Excavator, 1:50 Scale ....................................$150

Caterpillar 365B L Series II Excavator, 1:50 Scale......................$100

Caterpillar 365C L Front Shovel, 1:50 Scale ................................$110

Caterpillar TH407C Telehandler, 1:32 Scale ................................$100

Caterpillar 428 Backhoe w/Hammer, 1:50 Scale ..........................$50

Caterpillar D6K XL Track-Type Tractor, 1:50 Scale ......................$65

Caterpillar D6R Track-Type Tractor, 1:50 Scale ............................$90

Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........................$50

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ..........$185

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........................$100

Caterpillar D250E Articulated Truck (NZG), 1:50 Scale ............$125

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale ....$140

Caterpillar 428B Backhoe/Loader(NZG), 1:50 Scale ....................$75

Caterpillar 428C Backhoe/Loader (NZG), 1:50 Scale ..................$75

Caterpillar 438C Backhoe/Loader (NZG), 1:50 Scale ................$135

Caterpillar PR-450 Pavement Profiler (NZG), 1:50 Scale ..........$135

Caterpillar 511OB Excavator, 1:50 Scale ......................................$115

Caterpillar 621K Motor Scraper, 1:50 Scale................................$150

Caterpillar 631E Motor Scraper, 1:50 Scale ..................................$50

Caterpillar 980G Military Wheel Loader, 1:50 Scale ....................$60

Caterpillar 988B Wheel Loader, 1:50 Scale....................................$60

Caterpillar 988F Wheel Loader (NZG), 1:50 Scale ......................$115

Caterpillar V-50D Lift Truck (NZG), 1:25 Scale ..............................$50

Dynapac SD2500 CS Road Paver, 1:50 Scale ............................$125

Grove TM1500 White 6 Axle Crane, 1:50 Scale ..........................$140

Gehl 680 AWS Compact Wheel Loader, 1:50 Scale ....................$25

Hamm 3414 Pad Foot Compactor, 1:50 Scale ..............................$90

Hyundai 210LC-9 Excavator, 1:40 Scale ......................................$100

International 175 Crawler w/Demo Bucket, 1:25 Scale..............$150

International 350 PayHauler, 1:50 Scale ......................................$225

International 560 PayLoader, 1:50 Scale ......................................$140

International TD-14 Crawler Dozer, 1:16 Scale............................$140

JCB 190 Skid Steer Loader, 1:35 Scale ..........................................$50

JCB 467 WLS Front End Loader, 1:50 Scale ..............................$120

JCB 531 Loadall W/Bucket, 1:35 Scale ..........................................$80

JCB 930 Rough Terrain Fork Lift, 1:35 Scale ................................$50

John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........................$40

John Deere 400D Articulated Dump Truck, 1:50 Scale................$50

John Deere 460E Articulated Dump Truck, 1:50 Scale................$70

John Deere 624J Military Wheel Loader, 1:50 Scale....................$40

John Deere 850C Dozer, 1:50 Scale ................................................$45

John Deere 66575 Skid Steer Loader, 1:50 Scale ........................$45

John Deere MC Crawler Dozer, 1:16 Scale ..................................$100

Komatsu CK25 Compact Track Loader, 1:50 Scale ....................$45

Komatsu D51 EX Dozer, 1:50 Scale ................................................$80

Komatsu D51PXi-22 Dozer, 1:50 Scale ..........................................$85

Komatsu D375A Dozer, 1:50 Scale................................................$100

Komatsu D475A Dozer, 1:50 Scale ................................................$115

Komatsu GD655 Motor Grader, 1:50 Scale....................................$90

Komatsu HM400-3 Articulated Truck, 1:50 Scale ......................$100

Komatsu MT30 Articulated Truck (NZG), 1:50 Scale..................$140

Komatsu PC200-8 Excavator, 1:50 Scale ....................................$125

Komatsu PC360LC Excavator, 1:50 Scale ..................................$100

Komatsu WA380-7 Wheel Loader (NZG), 1:50 Scale ................$135

Komatsu WA500 Wheel Loader, 1:50 Scale ..................................$90

Komatsu WB146 Backhoe/Loader, 1:50 Scale..............................$75

Link Belt 250 X3 Excavator, 1:50 Scale ........................................$150

Terex 33-07 Off-Highway Truck (NZG), 1:40 Scale........................$75

Vogele 1900-2 Road Paver, 1:50 Scale ........................................$140

Vogele 2100-3 Road Paver, 1:50 Scale ........................................$145

Vogele MT3000-2i Power Feeder, 1:50 Scale ..............................$145

Volvo A40F Articulated Dump Truck, 1:50 Scale ........................$110

Volvo L220G Wheel Loader, 1:50 Scale........................................$120

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ..........$120

Wirtgen 240 Recycler, 1:50 Scale ..................................................$140

Wirtgen WR2000 Recycler, 1:50 Scale..........................................$100

Shipping and Handling Included WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell

Email – [email protected]

CEG Scale Models470 Maryland Drive

Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Komatsu D155 AX Dozer w/ Ripper, 1:50 Scale - $95

Case CX250C Excavator, 1:50 Scale - $175

Grove GMK3055 All-Terrain Crane, 1:50 Scale - $200

Caterpillar D7E Track-Type Tractor, 1:50 Scale - $85

Page 39: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 39

NO

Hydraulic Attachments

for Cutting or Grinding

and Digging.

TunnelExcavation

DiggingTrenches

CuttingConcrete

Slabs

AsphaltRemoval

1 (480) 983-2235www.drumcutters.com

Applications:• Demolition, Refurbishment• Trenching• Tunneling• Underwater Works• Pile Head Cutting• Permafrost, Frozen Stockpiles

Products:• Transverse Drum Cutters• Revolving Drum Cutters• Longitudinal Drum Cutters• Cold Milling Machines

800-552-8800

Steel Trench Shields

Slide Rail System Build-A-Box™

™™

!

Page 40: Midwest 22 2015

Page 40 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Wacker Neuson Unveils New Products at Press Conference

Compact excavator with Tier IV Final engine is on dis-play.

Carrie Megal (L), regional markingmanager of North America relaxeswith Julie Shuster, marketing commu-nications manager, during a break inthe presentations.

Marcus Auerbach, director ofproduct development, describednew tracked and wheeled excava-tors as well as the marketplacereceptivity to the material haulingdumpers.

The entrance to the 67-acre cam-pus for the Wacker Neuson NorthAmerican headquarters locatedin Menomonee Falls, Wis.

John Dotto, product application spe-cialist, explains and demonstratessome of the features of the new equip-ment during the walk around andhands-on session.

The 6503 wheeled excavator offers travel speedsup to 19 mph (30 kph).

On Oct. 14, U.S. and Canadian trademedia attended a press conferenceat the North American headquarters

of Wacker Neuson Corporation located inMenomonee Falls, Wis., near Milwaukee.The company is part of the global WackerNeuson Group, based in Munich,Germany, which manufactures equipmentfor the concrete, construction, oil and gas,landscape, agricultural, utilities and munic-ipal industries.The Menomonee Falls development

and production facility spans more than539,000 sq. ft. (50,074 sq m) and is dedi-cated to manufacturing, sales, finance,marketing, training and support. WackerNeuson products produced at the locationinclude rammers, rollers, trench rollers(soil and asphalt compaction), pumps andgenerators (worksite technology), andtrowels (concrete technology), as well asthe new products announced at the pressconference.In 2007 Wacker Neuson expanded the

product portfolio for the United States andCanada to include compact excavators,wheel loaders and dumpers. Wacker Neuson also is building skid

steer and compact track loaders. In early2015, the company rolled its first modelsoff the newly built production line at theMenomonee Falls plant.At the day-long press event, new prod-

ucts were formally introduced, a guidedfactory tour was conducted, and at the out-side training facility a live demo and walkaround of the machines was provided aswell as opportunities for hands-on opera-tion. As part of the products launch, briefings

were provided on the following new prod-ucts:

• Telehandler — TH522: Ground-engaging telehandler designed to functionlike a wheel loader, skid steer loader, and tooffer lifting like a telehandler. • Telewheel loaders — 8085T, WL60T:

These are additional models to the WackerNeuson telescopic wheel loader line. Bothhave all-wheel steering capabilities and thearticulated model offers extended reach tomove loads higher. • Wheel loaders — All-wheel steer and

articulated models now with Tier IV Finalengines.• Excavators — ET65, ET90, ET145:

New excavator models are said to beredesigned and feature Tier IV Finalengines, more power, new cabs and sizesranging from 1-ton to a new 14-ton (.9 to12.7 t) model. The new ET145 extends theexcavator line into a larger class size.• Wheeled excavators — EW65,

EW100: New machines are designed tosave contractors time loading and trans-porting to a nearby next site.

In the well-lit, cleanfactory, skid steerloaders are in produc-tion.

see NEUSON page 44

Page 41: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 41

HYDRAULIC TRACK INSTALLATION KIT

SOLID ALLOY WHEELS

www.bairproducts.com Email: [email protected]

913-947-3934 (LUGS) 855-575-5847 TOLL FREE

- Parts Can Be Installed W/ Factory Parts - - Installation Videos On YouTube -

Got Lugs?

BOLT-ON REPLACEMENT TRACK DRIVE LUGS

STOP TRACK DERAILMENTS ON COMPACT TRACK LOADERS

BOGIE REPLACEMENT WHEELS

913-947-3934 (LUGS)855-575-5847 TOLL FREE

(LUGS)

EV / TST / AAAT / AC

TOLL FREE

- Parts Can Be Installed W/ Factory Parts - ideos On Y- Installation V Videos On Y

Bair’s AxleFactory

.bairpr

STRAX P PAERE

wwwEmail: info@bairpr

- Parts Can Be Installed W/ Factory Parts - ube - ouTTube - s On Y YouT

Bair’s Axle

oducts.com .bairproducts.comEmail: info@bairpr

CAT 277 & 287 D SeriesTEREX/ASV SR & PT 75 / 80 / 100G / 110

TENEMCALP REEIGOBSLEEHW

Y WOLLD AILOS

TEREX/ASV SR & PT 75 / 80 / 100G / 110

SLEEH -T-LOB

AGG/FARM Lugs Available for h ll J h D S d d

Go ot ot Go Lugs?ot ug gs? Lugs? s? Lugs? ? gGot Lugs? s?

VIRK DCART TNEMECALPEN RO-

YHNI

AGG/FARM Lugs Available for CAT Challenger, John Deere Speed dozers, Case Quad & More

SGUE LV

K CARC TILUARDYTI KONITALLATASN

FITS Both 18” & 20” Frame Machines

S

FITS Both 18” & 20” Frame Machines

N CS OTNEMLIAREK DCARP TOT

•Capture the Track’s Cleats At All 4 Sides

•Turn Single/Double Sided Factory Wheels Into Triple Sided

•Cat & John Deere Compact Track Loader

hallenger, John Deere Speed dozers, Case Quad & More

SREDAOK LCART TCAPMON C

• Install rubber tracks fast

Capture the Track’s Cleats At All 4 Sides

Turn Single/Double Sided Factory Wheels

Cat & John Deere Compact Track Loader

CAT Challenger, John Deere Speed dozers, Case Quad & More

Install rubber tracks fast with Hydraulic Tools

®

NEW! MULTI-TANK TRAILER

/ 10-GAUGE STEEL

/ THREE-YEAR TANK WARRANTY

/ UP TO EIGHT SEPARATE TANKS

877.879.1490 | ThunderCreek.com |All-In-One Jobsite Service Solutions

WITHOUT A CDL OR HAZMAALLEGGALL

WITHOUT A CDL OR HAZMAY TRANSPORT DIESELALL

WITHOUT A CDL OR HAZMAY TRANSPORT DIESEL

TWITHOUT A CDL OR HAZMAT

All-In-One Jobsite Service SolutionsAll-In-One Jobsite Service Solutions

Page 42: Midwest 22 2015

Page 42 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 43: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 43

2011 Case 580SN, 1008 Hrs, stk# S00901$76,000

2013 Case SR200, 231 Hrs, Stk# P06101$36,000

2013 Case 580SN T4A, 315 Hrs, Cab w/H/AC, 4x4,Ext, Aux Hyd, 4 Lever, Stk# P08032 $84,500

2003 Case 580SM, 6461 Hrs, Stk# P08113$34,350

2013 Case 580SN, 327 Hrs, Stk# P05875$99,500

2013 Case 580SN T4A, 1125 Hrs, Stk# P07923$79,000

2006 Case 580M II, 3627 Hrs, Stk# P08112$45,770

2012 Case SR175, 1335 Hrs, Stk# P07497$32,000

STOPS FUEL GELLINGNEW: The Universal Filter Preheater is designed for diesel fuel filter housings, for lube oil and hydraulic filters too (specify hyd. size). It wrapsaround the filter housing and reduces or eliminates the possibility of coldweather fuel gelling stopping the engine. It is easily removable and transferable and is wired for your choice of: direct current or alternatingcurrent or a convertible model combining dc and ac. A standard 12V or 24VUniversal Fuel Filter Preheater is priced at $138.

The ‘peel & stick’ Universal Preheater attaches to thebottom or the side of the oil pan and converts the housinginto a heat transfer element. It warms the oil withoutburning it making cold starts easy. It can be used ongearboxes, transmissions, transfer cases, water tanksand even bulk oil tanks. The Preheater plugs into any120 or 240 volt outlet and consists of a thin siliconefiberglass pad containing a metal grid. To install it, youclean an area on the bottom or side of the oil pan and press the pad onto it, then use silicone toseal the edges of the pad and place a flexible ceramic insulation pad over it. It is available inseveral models depending on the lube capacity. A 50 watt unit sells for $44 and a 350 watt unitsells for $133.

PO Box 83, North Aurora, IL 60542-0083800-530-5064 Local: 630-966-8992 Fax: 630-801-9569

[email protected] • www.etipinc.comuniversalpreheater.etipinc.com

(Veteran Owned Small Business)

Page 44: Midwest 22 2015

Page 44 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Guests Receive Guided Tour During Day-Long Event

Chris Bernard, CEO, out-lined the company’s mis-sion and plans for growth.

Workers consult the design reference used for quality control duringskid steer loader production.

A skid steer loader is put through a series oftests while still in production.

Guests see an example of the side dumping capability of a bulkmaterial mover with full payload.

Dumper bulk material mover demonstrates carrying a fullpayload.

An ST 35 radial lift track loader is demonstrated.

Brent Coffey, product manager of loaders,described the advantages of all-wheelsteering when working in confined spacesand the “innovative design” of the ground-engaging telehandler.

Johannes Schulze Vohren, regional president —North America, outlined the scope of the compa-ny’s product offering, which focuses on light con-struction and compact equipment. He emphasized,“We are not a heavy-equipment manufacturer.”

• Dumpers — DW60, DW90: The DW60can carry up to 4.2 cu. yds. (3.2 cu m) of dirtand are intended to match to work with 5-ton(4.5 t) to 10-ton (9.07 t) excavators. The DW90can carry up to 5.6 cu. yds. (4.28 cu m) of dirtand match up with larger excavators, such asWacker Neuson’s newest 14-ton (12.7 t)model.

• Skid steers/Compact track loaders —These compact machines now come with astandard factory warranty of two years or2,000 hours, whichever comes first.

• Walk-behind roller — RD7: New walk-behind tandem rollers are designed for soil andasphalt compaction applications and a choiceof diesel or gasoline engines.

• Trench roller — RTxSC3 with Compatec:Infrared remote control trench roller is nowavailable with Compatec, a compaction moni-toring system.

• Rammer — BS70-4As: A 3.6-hp GXR120Honda engine powers this new addition to thefour-cycle rammer line.

• Generators — G625, G1100: Designed forindustrial applications, the new 1/2-meg and 1-meg generators are capable of paralleling tomeet even higher demands. Sound-attenuatedenclosures allow for larger applications requir-ing quiet operation.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG

NEUSON from page 40

Page 45: Midwest 22 2015

Schuyler Rubber Company, a manufacturer of recycledrubber products for more than 60 years, launched its newdurable snow blades. The 911SP withstands repetitive usewith minimal risk of damage to airport lighting, signage andsurfaces on runways and taxiways. In addition to high dura-bility, the blades feature Schuyler’s T-track system for fast,easy mounting and changeouts to snow plows and wheelloaders, which shortens service downtime, according to the-manufacturer. The manufacturer currently is offering inter-ested customers and dealers free trials as part of the launch.“We developed this rubber blade to address a growing

concern regarding snow and ice removal at airports,” saidGreg Armfield, Schuyler sales manager. “They need a bladethat’s soft enough to prevent damaging the runway and safe-ty lights, but durable enough to minimize changeouts. The911SP achieves the best of both worlds and will give opera-tors the ability to move the most amount of snow.”Schuyler’s 911SP withstands more wear than molded rub-

ber blades. The blade is made of recycled rubber and featuresreinforced nylon fabric throughout the blade to ensure itsintegrity. The manufacturer offers similar blades for the solidwaste industry, which extends the life of the blade by a 2-to-

1 ratio. And the 911SP is denser than molded blades — atleast 50 percent more in volume — which extends wear lifeand reduces changeouts.Since the blade is made from recycled rubber, there is less

impact on the runway and safety fixtures than with steelblades. For instance, the operator can lower the rubber bladeto the ground and drive forward because the rubberslides over runway lights and surfaces with-out damaging the lights or chipping the con-crete, according to the manufacturer.

Schuyler designed the 911SP for quick servic-ing once they become worn. The blade features the manu-facturer’s T-track mounting channel, which allows it to slideinto position on a snow plow blade or wheel loader bucket.Then the equipment operator or onsite mechanic uses anadjustable or air-powered wrench to secure the blade.Schuyler includes all mounting hardware with each blade.The 911SP fits a majority of snow removal equipment,

and Schuyler can customize the blade to fit customer speci-fications. For instance, customers might opt for multipleshorter blades to fit large snowplows and/or wheel loaders tominimize maintenance time.“Some customers prefer

mu l t i p l e

blades because itallows them to replace individual

sections rather than the entire length of the blade orbucket,” Armfield said. “This helps keep replacement costsand downtime low, so airport crews can focus on keeping thearea clear and safe for incoming planes as well as the groundcrew.”For more information, call 800/426-3917 or visit

goschuyler.com/products/snow-plow-blades.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

Schuyler Launches Snow Blade for Airport Applications

Pages 45-49

Snow and Ice SectionFor more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

Virnig ManufacturingInc. announced a new pin-on

wing option.This option features two 12 in. (30.5

cm) wide wings angled 20 degrees for-ward from moldboard to increase a snowblade’s width by 21-3⁄4 in. (55 cm). Whereextra width is not needed, simply removethe wings by taking out the two pins thathold each wing in place.A 1 in. (2.5 cm) thick urethane edge has

slots for height adjustment as the blade’smain edge wears. Slots allow enoughadjustment for flipping of the main blade’swear edge.The pin-on wings are compatible with

new Virnig V-Snow blades and anglesnow blades with factory mounted holes.Two brackets bolt to each side of snowblade moldboard and two pins mount eachwing to the bracket.Retro pin-on wings also are available

for older models. These wings are installedby drilling holes and bolting brackets toeach side of the moldboard. Two pinsmount each wing to the brackets.Alternatively, the brackets can be welded

to the moldboard. Virnig does not recommend installing

these wings on non-Virnig snow blades.All Virnig products are backed by a

one-year warranty, and the skid steerattachments are built with a universalmount to fit most skid steer loaders includ-ing: Bobcat, Caterpillar, ASV, Case,Daewoo, Gehl, JCB, John Deere, Kubota,Mustang, New Holland, Takeuchi, Terex,Volvo, Wacker-Neuson and others.For more information, call 800/648-

2408 or visitvirnigmfg.com/products/snow/.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Pin-on wing option features two 12 in. (30.5 cm) wide wingsangled 20 degrees forward from moldboard to increase a snowblade’s width by 21 3⁄4 in. (55 cm).

Virnig Manufacturing Announces Pin-On Option for Snow Blades

Schuyler Rubber Company’s new snowblades are a safe alternative to steelblades for winter airport operations.

Page 46: Midwest 22 2015

Page 46 • October 24, 2015 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

The 5 to 14 cu. yd. (3.8 to 10.7 cu m)capacity DuraClass Sidewinder dump bodyoperates as a standard dump body and pro-vides a solution for spreading material dur-ing the winter months. The body sidewall isshaped into a continuous top rail, side and

running board configuration, eliminating theoutside seam weld below the top rail, pre-venting moisture and freeze problems.

The DuraClass Sidewinder is able tospread sand or salt up to 25 ft. (7.6 m), thewidth of two full traffic lanes, with continu-

ous feed from the dumpbody. The unit features highquality construction includ-ing rugged COR-TEN steel,a heavy-duty box bracedtailgate, full depth cornerposts with additional supportadded to the right rear postand continuous 100 percentwelding on the body.

For more information, call800/255-4345 or visitwww.duraclass.com.

(This story also can befound on ConstructionEquipment Guide’s Web siteat www.constructionequip-mentguide.com.)

Material Spreading Solution...

DuraClass All-Season Dump Body Spreads Across Two Lanes

The DuraClass Sidewinder is able to spread sand orsalt up to 25 ft. (7.6 m), the width of two full trafficlanes, with continuous feed from the dump body.

Crysteel Truck Equipment52248 Ember Rd.

Lake Crystal, MN 56055507-726-6041 800-722-0588

Fax: 507-726-2984

1130 73rd Ave. N.E.Fridley, MN 55432763-571-1902 800-795-1280

www.crysteeltruck.com

Cannon Truck Equipment51761 Danview Technology Court

Shelby Twp., MI 48315586-991-0054

Fax: 586-991-0074www.cannonequip.com

Bert’s Truck Equipment3804 US-75

Moorhead, MN 56560800-232-3787

www.bertsonline.com

Bert’s Truck Equipment2506 Bus. Hwy. 2

East Grand Forks, MN 56721218-773-1194

Fax: 218-773-1840Toll Free: 800-325-2412www.bertstruck.com

Page 47: Midwest 22 2015

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 24, 2015 • Page 47

r ce oued snn ap iotS

e Ereen Dhof Jne oie ltplemor c

K40d 2ns, areetd Siks SeireSe E

t capmoJ C44d 2n, aK40, 3K

nod sns, amoorle bgnaetcurtsbnoy ullautrivs smeoh cca. EsredaoL

r ce oued snn ap iotS

od blns, aedas, blrhesuw pno. Aedisnhe im tory ftilibisid ved cetat heeiuh qtid wradnats s

e Ereen Dhof Jne oie ltplemor c

e a wdivore p, wllf at ose. Bsrewh outid weppiuqe en bal cld an. Ahe oun tr oetnip weet kahs tbad c

K40d 2ns, areetd Siks SeireS-e E

o s tecrousef rh otlaee a ws, tekcu™ bore Ptiskror Wh ou

g nireville deihe wdisthe out capmoJ C44d 2n, aK40, 3K

Fenton, MO 63026636/349-0200

Cape Girardeau, MO63703

573/334-0563Foristell, MO 63348636/673-2131

Cuba, MO 65453573/885-0500

Mt. Vernon, IL 62864618/244-6800Paducah, KY270/554-1131

Owensboro, KY270/684-2339Evansville, IN812/473-0484

Ashland, KY606/928-3477Pikeville, KY606/432-0321Marietta, OH740/373-5255Cowen, WV304/226-3299

Beaver, WV304/255-1525

Elkins, WV304/636-6421

Cross Lane, WV304/204-1818

1400 W. Ogden AveNaperville, IL 60563630/355-7150

Fax: 630/355-7173South Holland, IL708/331-6362Rockdale, IL815/730-9011

Wauconda, IL847/526-7700Rockford, IL815/961-3160

South Bend, IN574/232-1461Lafayette, IN765/447-6933

www.westsidetractorsales.comwww.lec1.comwww.erbequipment.com

Page 48: Midwest 22 2015

Page 48 • October 24, 2015 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Page 49: Midwest 22 2015

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 24, 2015 • Page 49

No matter what the conditions, Hiniker professional grade snowplows are ready to help you reach new levels of productivity and performance!

V-PLOWS: Trip-edge designs give smooth operation and effective protection. Double acting cylinders provide positive moldboard position control.

C-PLOWS: Get the heavy-duty performance of the Hiniker trip-edge conventional plow plus the added versatility of a high performance backdrag plow. An amazing time-saver in driveways, parking lots and loading docks.

SCOOP PLOWS: High capacity concave shape captures snow to effi ciently clear large lots and parking areas. Angles left or right for conventional plowing.

CONVENTIONAL PLOWS: 30 inch tall high-curvature blades roll deep snow off quickly and efficiently. Commercial plowers will appreciate the extra strength and efficient design.

SPREADERS: Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Long-lasting stainless steel construction. Choose between OHV gas engine or dual-motor electric hopper spreaders, or new stainless steel tailgate spreader models!

HINIKER COMPANY 1-800-433-5620 www.hiniker.com

FULL-TRIP CONVENTIONAL PLOWS

TRIP-EDGEC-PLOWS

TRIP-EDGE CONVENTIONAL PLOWS

TRIP-EDGE SCOOP PLOWS

TRIP-EDGETRIP-EDGEC-PLOWSC-PLOWS

TRIP-EDGE SCOOP PLOWS

TRIP-EDGEC-PLOWSC-PLOWS

SCOOP PLOWS:large lots and parking areas. Angles left or right for conventional plowing.

CONVENTIONAL PLOWS:quickly and efficiently. efficient design.

SPREADERS:Hiniker Spreader. Long-lasting stainless steel construction. Choose between OHV gas engine or dual-motor electric hopper spreaders, or new stainless steel tailgate

TRIP-EDGE CONVENTIONAL PLOWS

FULL-TRIP CONVENTIONAL PLOWS CONVENTIONAL PLOWS

No matter what the conditions, Hiniker professional grade snowplows are No matter what the conditions, Hiniker professional grade snowplows are

TAILGATE SPREADERS

Torsion-Trip V-Plow

PROFITABILITY PROFITABILITYPROFITABILITYPROFITABILITYPROFITABILITYDriven

TOPPERS PLUS1929 East Madison Ave.

Mankato, MN 56001507-387-7376

800-321-7587

www.toppersplus.com

TRUCK UTILITIES2370 English St.,

St. Paul, MN 55109651-484-3305

800-869-1075

2770 5th Ave S., Fargo, ND 58103701-241-9411

800-972-9250

www.truckutilities.com

NORTH CENTRAL TRUCK &EQUIPMENT

2629 Clearwater RoadSt. Cloud, MN 56301

732 30th Avenue SEMinneapolis, MN 55414

877-485-9595

www.northcentralinc.com

TRUCKIN’ AMERICA4720 Hwy. 52 N.

Rochester, MN 55901800-556-4720

507-285-9855

www.truckinamerica.com

Page 50: Midwest 22 2015

Page 50 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

hitachiconstruction.com

A

WEST SIDE TRACTOR SALES CO.www.westside

tractorsales.com

1400 W. Ogden Ave. • Napervile, IL 60563630-355-7150

Fax: 630-355-7173

150 W. 162nd St. Route 6 • South Holland, IL 60473708-331-6362

Fax: 708-331-7334

3110 Prairie Rd. • Rockford, IL 61102815-961-3160

Fax: 815-965-1810

1560 N. Old Rand Rd. • Wauconda, IL 60084847-526-7700

Fax: 847-526-3565

600 Walnut Court • Rockdale, IL 60436815-730-9011

Fax: 815-730-9036

AIS CONSTRUCTION EQUIPMENT CORPORATION

www.aisequip.com

3600 North Grand River Avenue • Lansing, MI 48906517-321-8000

Fax: 517-321-6275

Grand Rapids600 44th Street S.W. • Grand Rapids, MI 49548

616-538-2400Fax: 616-538-0449

Northeast Detroit65809 Gratiot Avenue • Lenox, MI 48050

586-727-7502Fax: 586-727-7311

Saginaw4600 AIS Drive

P.O. Box 253 • Bridgeport, MI 48722989-777-0090

Fax: 989-777-1583

Traverse City8300 M-72 East • Williamsburg, MI 49690

231-267-5060Fax: 231-267-5257

West Detroit 56555 Pontiac Trail • New Hudson, MI 48165

248-437-8121800-457-8121

RDO EQUIPMENT CO.www.rdoequipment.com

12500 DuPont Ave. S. • Burnsville, MN952-890-8880

1910 LorRay Dr. • North Mankato. MN506-387-1836

1236 60th Ave. N.W. • Rochester, MN507-282-8888

6700 Highway 10 NW • Sauk Rapids, MN320-259-6222

BidSpotter.com, a leader in interac-tive live and timed auctions, has pro-moted Tim Hill to vice president ofsales. Hill has been with BidSpotter.com

for 5 years and has been responsiblefor successfully growing the agricul-ture and yellow iron verticals. Hegrew up in the construction industryand has extensive construction andagricultural equipment knowledge,according to the company. With this promotion, he will lead

and manage the sales team, leadingBidSpotter.com’s growth plans andensuring the portal continues toexpand the reach of auctioneers tonew bidders. He will be part of thesenior executive team driving expan-sion and growth in the coming years. “I am delighted to have this oppor-

tunity to be part of a great executiveteam who consistently delivers excel-lent results for our clients. We alwaysput our customers first, and our ongo-ing commitment to investmentensures that BidSpotter will continue

to be the best in class,” said Hill.Anne Somers, CEO, ATG Media,

said, “I am delighted that Tim hasjoined the senior team in this role.He brings a wealth of experience inthe industry to our highly talentedsenior team. Tim will play a major

part in steering the development ofour products and services going for-ward.”

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)

ATG Media Promotes Tim Hill to VicePresident of Sales, BidSpotter.com

Tim Hill will lead and manage the sales team, leading BidSpotter.com’sgrowth plans and ensuring the portal continues to expand the reach ofauctioneers to new bidders.

By James NordASSOCIATED PRESS

PIERRE, S.D. (AP) South Dakota has raised at least $20million more for road and bridge funding since a package oftax and fee hikes went into effect earlier this year, and Gov.Dennis Daugaard’s office said Sept. 22 he is confident themeasure will meet initial fiscal expectations. Revenues were up at least $20 million from April through

August over the same period last year, according to roughfigures from the Department of Revenue. Projectionspegged the infrastructure package at bringing in about $85million in its first year through fuel taxes, fees and otherassessments. Most of the measure went into effect April 1,including a 6-cent hike in gas taxes. “The Governor believes this is on track with what we

hoped and is pleased that we will be maintaining andimproving our highways and bridges,’’ spokeswomanKelsey Prichard said in a statement. During a legislative oversight panel meeting Sept. 22,

Department of Revenue Secretary Andy Gerlach said theagency would provide lawmakers with more information inthe future about the infrastructure package revenue. “It’s too hard to know, but I think we’re definitely seeing

an increase, and I think we’ll see more of a positive increaseas we go forward,’’ Gerlach said in an interview. “I don’tknow if we’ll get to the $85 [million], but we’ll get more

money in the highway fund, I guarantee you that.’’ Department of Transportation Secretary Darin Bergquist

told lawmakers on the Government Operations and AuditCommittee that the extra funding has come in too late toimpact this year’s construction season. The additional funding will allow officials to complete

more construction projects that need to be finished withouthaving to defer them into future years, Bergquist said.Bidding for work for next year’s construction season is set tobegin this fall. “Because of the timing, you didn’t see a lot of new, addi-

tional construction barrels out there this summer, and youwill next year,’’ he said. Lawmakers in the 2015 session passed the plan to pay for

infrastructure spending. The measure increased state’s fueltaxes on gas and diesel from 22 cents to 28 cents, for exam-ple. The package also increased the state’s motor vehicleexcise tax from 3 percent to 4 percent and hiked license platefees by 20 percent, among other provisions. So far, the excise tax has generated nearly $8 million more

than over the same period last year. The gas taxes haveraised nearly $12 million in additional money. “It does not appear that the tax increase is having a nega-

tive effect on people’s gas purchases or how they’re driv-ing,’’ Gerlach said.

(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)

S.D. Revenue Hikes in 2015 Bring inMore Funding for Roads, Bridges

Page 51: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 51

NORTRAXwww.nortrax.com

310 Industrial Park Drive • Ashland, WI 54806715-682-5522

Fax: 715-682-8476

4341 South Prairie View Rd. (Hwy 53 North)Chippewa Falls, WI 54729

715-834-2924Fax: 715-834-1173

1890 US Hwy 8 • Monico, WI 54501715-487-5583

Fax: 715-487-5968

1425 O’Keefe Drive • Mosinee, WI 54455715-693-3820

Fax: 715-693-3825

259 Convenience Lane Southwest • Bemidji, MN56601

215-759-1996Fax: 218-759-1790

3401 Arrowhead Rd. • Duluth, MN 55811218-722-7456

Fax: 218-722-2619

34316 Hwy 2 • Grand Rapids, MN 55744218-326-9427

Fax: 218-327-1248

1818 North Lincoln Rd. • Escanaba, MI 49829906-789-9054

Fax: 906-789-0344

BROOKS TRACTORwww.brookstractor.com

Sun Prairie1900 W. Main St. • P.O. Box 9 • Sun Prairie, WI 53590

608-837-5141Fax: 608-837-4012

Milwaukee12101 W. Silver Spring Dr. • Milwaukee, WI 53225

414-462-9790Fax: 414-462-7242

De Pere1031 Lawrence Dr. • De Pere, WI 54115

920-336-5711Fax: 920-336-6405

West Salem451 W. Avenue N. • West Salem, WI 54669

608-786-2644Fax: 608-786-2206

Plover5429 Prairie Dr. • Plover, WI 54467

715-254-2777Fax: 715-254-2799

COMING 2016Mount Pleasant

1609 SE Frontage Rd. • Mt. Pleasant, WI 53177

RUDD EQUIPMENT COMPANY

4344 Poplar Level Rd • Louisville, KY 40213502-456-4050

6901 Highway 41 N • Evansville, IN 47725812-867-6661

5820 Industrial Rd • Fort Wayne, IN 46825260-482-3681

2655 Kentucky Ave • Indianapolis, IN 46221317-247-9125

728 W Cumberland Gap PKWY • Corbin, KY 40701606-528-9440

2114 Highway 1428 E • Prestonsburg, KY 41653606-874-2104

4679 Baumgartner Rd • St. Louis, MO 63129314-487-8925

11807 Enterprise Drive • Cincinnati, OH 45241513-321-7833

2512 Jackson Pike • Columbus, OH 43223614-636-4050

COMING SOON: Cleveland, OH216-393-7833

Page 52: Midwest 22 2015

Page 52 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

© 2014 Yanmar America Corp.

RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM.Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR.

RuleTheJobsite.com

Corp.anmar America 2014 Y Yanmar America ©

BUCK & KNOBBYEQUIPMENT CO.6220 Sterns Rd

Ottawa Lake, MI 49267734-856-2811

CUSTOM TRUCK &EQUIPMENT

7701 Highway 24Kansas City, MO 64125

800-861-1065www.cte-equipment.com

2801 Beverly Dr.Aurora, IL 60502630-820-3030

120 E. Martin Dr,Goodfield, IL 61742

309-965-3300

1801 179th St. NorthEast Moline, IL 61244

309-751-9540

13402 Britton Park Rd.Fishers, IN 46038317-842-1040

3566 Citadel CircleNewburgh, IN 47630

812-490-4400

3310 W. Coliseum Blvd.Fort Wayne, IN 46808

260-484-2494

940 Garden Ln.Fowlerville, MI 48836

517-915-0555

621 Spirit Valley E Dr.Chesterfield, MO 63006

636-532-2332

1098 Franklin St.Marne, MI 49435616-677-5900

VERMEER OF IOWAPO Box 168-661 Hwy T14

Pella, IA 50219641-628-2000

Vermeer Siouxland4858 D Ave.

Marcus, IA 51035712-376-2310

Vermeer of Eastern Iowa101 Commerce Blvd.Tipton, IA 50219563-886-2444

PAINT VALLEY EQUIPMENT10550 Twp Rd. 262

Millersburg, OH 44654877-774-0081

Fax: 330-674-4031

ROEDER IMPLEMENT INC.2550 Rockdale Rd.Dubuque, IA 52003

563-557-1184Fax: 563-583-1821

VERMEER MIDWEST

Page 53: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 53

Newman Tractor2841 Verona Road • Verona, KY 41092

859-485-8500 • Fax: 859-485-8573www.newmantractor.com

K Y 8 5 9 . 4 8 5 . 8 5 0 0 | F L 8 6 3 . 5 3 3 . 8 9 0 0

Highway Equipment Company of Ohio1405 Timken Place SW • Canton, OH 44706

330-915-8391 • Fax: 330-915-8411www.highway-equipment.com

Page 54: Midwest 22 2015

Page 54 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ILLINOIS

INDIANA

IOWA

KANSAS

KENTUCKY

MICHIGAN

MINNESOTA

MISSOURI

NEBRASKA

NORTH DAKOTA

OHIO

SOUTH DAKOTA

WISCONSIN

f EbBDIIN

bcob.www93-186w HeivraiF

t oacboBINLIL

telrCa

llif EANADI

mco.tlsfotabc7418-79

sthgiew Hsiuo. Ltf St o

OISIN

oozamaalK

3333-364-865delfiretsehC

8833-778-616rente CnoyrB

ynpam Cotnpmeiu EqnotNAIGHMIC

b BoedizrothuA

IROUSSIM

omc.tacobbetatsirt.www920-133-777 • 8273-704-156

adnaa CetltLi822-262-77 8 •4890-489-259

eillvsnruBtcab BoetatS-irT

srleae Dtacb

i EqisMoA DUTHOS

5-533-739yoTr3-932-793notDayal Sairtsudni IaaHeD

59

48

CL LATTAOKA

7285

6713n

ecivres & Sela

radeC Cedaf otcabBo

obcxer.www57-913ilruBf otcabBoWOI

2-2636navEf Et oacboB

w-437

uiD

ww

sdiap Rsdipa Rr Ceda

omc.tacobob9999-25

notgninotgnilr Bu

AWWA

009-252eillvsn

ellivsnavf E

mo.ctnempiuqeeliubd.www1326-62-788 8 •1313-499-

orbr AnnA.c In,tnpmeiu Eqelbu

moc.tnempiuqetonelarc.ww6666-777-989

wangiaS9999-124-437

ainvoLi4392-433-962oozamaalK

AKSAEBRN

mco.tlsfotabcob.www580-287-00 8 •0902-522-636

kray PelalV0029-402-366

nollaO’F3549-68-8375

aibolumCsiuo. Ltf St oacboB

IROUSSIM

7235056nourHmpiuqr EeimerP

ipmuqesirrmo.tacbob-232-2506errieP3-548-506gdirobM3-292-506ehctiM

pmeiu EqisrrMo

45

0017n

CL, Ltnem

moc.clltneipm500-2

e1113eg

0103ll

CL L,tnpme

obcxer.www38-365envaDhf tt oacboB

obcxer.www42-913

waoIf It oacboB

obcxer.www9-3913radeC

cboB

w8-12

M

omc.tacobob0021-138trpoen

seitid Caue Q

omc.tacobob031-184

yit Cwaytia Cwof I

omc.tacobob0822-39sdiap R

ytnuol Ciar Tettf Ot oac

moc.ijdiembftoacbob.www06464-97-00 8 •0646-157

jidimeBijidmef Bt oacboB

ATTAOSNNEIM

0024-822-690eeunageN

.c In,lsatne Ryy RwadiM

skrod Fnarf Gt oacboB

moc.edihnoiro.gwww1335-2661-07eak LslievD

eka Llsiv Def otcabBoATTAOKAH DTORN

4090-234-803noradhC

nord Chaf otcabBoAKSAEBRN

0-02-7157a FweppihC8 8 •991-1187-262retluB10-830-29oteplpAsul PtcabBo

NCOSIW

huqereimepr.www7-235-056

s

0030slala F

375-1724-88r

071no

.c In,sNSIN

mo.cnorhu0017

NAK

imxocya.jwww382-17e PkaLpm IxcoyJa

vaehnaybr.www5 • 8432-382-931elO Eyy Eqvea HnayBr

-023

mraF

ww

Bo

w-812

cbo

ASSN

mo.ctnemelpim15132-3

krae P.c In,tnmeelp

moc.tnempuiqyev3807-984-885 • 8

neiw.c In,tnpmeiu Eq

7584-796-88 8 •7372-572-lesDas

.c In,tnpmeiu EqetiR-m

mco.retsehrocfotabcob.ww3507-582-075eillvtrawetS

retseoch Rff R otcabBo

mo.cliatrettofotacbo.bwww8823-258-775 • 8054-937-

slals FugreFytuol Caettf Ot oac

5237-392-107ogarF

Cotnpmeiu EqnotsnwaS

moc.edihnoiro.gwww50-5027-5107

notsilliWnotsilli Wf otacboB

moc.edihnoiro.gwww60-50277-107skrod FnarG

hoT3-396-157eensioMpmeiu EqiksrediwS

1-3855-17ahitehWcivres & Selao SrmoK

luptacbo.bwww2-389-029epereD

p.r

1503ee

.c In,tnpme

594lla

detaroprocne Ic

mo.cslu0102

e

bbg.www48-027

nilwoB Bof ott ocabBoTENK

atsethiw.www1 • 8518-858-631ciWr Mate StihWNAK

-637

-367

aL

-023

-2023

mco.tabcob3524-24

eenr Ggnneer Ggnilw Bo

YUCKT

moc.yrehincamr1233-059-001 • 8

athicyrenihcar M

ASSN

23449-74-88 8 •00289-74otteorL

6625-844-880 • 8271-323-aknoA

.c In,tnpmeiu Eqona

moc.piuqeeitrmrfa.www1123-484-772 • 8763-532-

ramillW182-226-244 8 •580-204-2

udol Ct.S

grubsdolnyeRACBOB4-005 • 8683-444-739

bar. OtMACBOB4-0 80 •549-847-8315

itanincinCseisrpret EntcabBo

IOHO

moc.tonsnasw.www1099-378-170

toinM

obbetatsirt.www61 • 8080-315-517ndsouH

BoetatS-irT

nempiueqiksrediws.www25-765-17ausauW5-9665-17prhoT

TA

TA

omc.tacob8142-862-66

ntcab Bo

phpnds.arb/moc.t1932

au5525

ww

orNonaL

-259

moc.doowronfopuiqeona.lw18127-64-259

acirem Angou Yodowordoowro Nf otnpmeiu Eq

moc.puiqeona.lwww0016-357-770 • 8316-544-

eeophakS

mo.ctne-tacbo.bwwwACBOB4-000 • 8031-368-416

grubsdolnyeR

TA

Page 55: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 55

Bobcat.com/Bite11

napmot Cacbo5 B102©t lacboe Bhd tn a®atcbBo

TIS WBOJROE MES

acbBot iisV

374510. | 1devreses Rthgil Rl. Ayne Uhn ty inapmot Cacbof Bs okramedard teretsigee rro agot l

YSP SMALO CRHE PH TTUOT TAT EFEO DYS TAAYS TE W

11teim/Bco.ta

. seirtnuor cehts ouoirad vns aetatd Setin

.METYSHGU

Page 56: Midwest 22 2015

Page 56 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ARTBA Foundation Recognizes Effortsto Promote Safety in Road Work ZonesThe American Road & Transportation Builders

Association’s Transportation Development Foundation(ARTBA-TDF) honored five initiatives for their commit-ment to promoting safety during the association’s 17th annu-al “Roadway Work Zone Safety Awareness Awards.” Theawards were presented at a Sept. 30 luncheon duringARTBA’s National Convention in Philadelphia. The competition recognizes outstanding programs, cam-

paigns and technologies aimed at helping reduce roadwaywork zone accidents, injuries and fatalities. Winners wereannounced in three categories:

Outreach Campaigns: Programs that promote safetythrough implementation of employee and/or public educa-tion campaigns. There were winners at the national, and stateand local levels in the outreach campaign category.

Training Programs: National, state and local education-al programs that promote worker safety on the jobsite.

Innovations in Technology: The role that technologyplays in improving safety in and around work zones withinnovative products and methodologies or innovative appli-cations to existing products and methodologies.

Outreach Campaign/Local/Municipal Level AGL Constructors, Archer Western, Granite

Construction and Lane Construction Company“35Express Barrel Monster Campaign”To mark National Work Zone Safety Awareness Week,

project crews on the 30-mi. (48 km), $1.4 billion 35Expressproject in North Texas designed and built 15-ft. (4.6 m)“monsters” from recycled orange construction barrels, safe-ty and channelizer cones to serve as reminders to the travel-ing public to observe safety guidelines in work zones. Tokeep the community involved, AGL Constructors imple-mented a voting system where motorists were encouraged tovote via Facebook for their favorite barrel monster. Thisyear’s monsters included King Kong, AGL Airplane, TheExcavator, Emmet and The Eagle, and featured importantsafety messages encouraging motorists to stay off theirphones, follow the flagger, reduce their speed and pay atten-tion to signs while driving through a work zone.

Outreach Campaign/State LevelCalifornia Department of Transportation, ProProse

and Glass Agency “Be Work Zone Alert”Caltrans created an authentic campaign utilizing young

children of current Caltrans maintenance workers to delivera deeply personal and compelling message to the public —“Be Work Zone Alert.” The educational campaign, featuringnearly 90 billboards and public service announcements,aired in 23 markets across California and has helped raiseawareness, improve public safety and reduce collisions,injuries and fatalities on the state’s highways. The multime-dia effort has delivered more than 42 million digital adimpressions and has reached over 432,000 people whileaddressing evolving safety messages like work zones maynot always be marked by cones, safe driving means morethan slowing, and drivers must be alert and avoid distractionsin work zones.

Outreach Campaign/National Level DBi Services LLC: “Billboard and Student Driver

Outreach”In an effort to educate new drivers on the dangers of driv-

ing within work zones, DBi Services delivered a series ofWork Zone Safety presentations to more than 40 highschools in Virginia, Georgia, Texas and Florida. Industryexperts explained to teenagers the importance of Florida’s“Move Over” law and its recent expansion to include vehi-cles with amber flashing lights working along the roadside.In addition to engaging with high school students, DBi

Services, in conjunction with National Work Zone SafetyAwareness Week, sponsored a series of billboard ads androadway message boards to remind motorists of the impor-tance of driving carefully in roadway construction zones.The billboards appeared along stretches of I-95 inBrunswick, Georgia, potentially reaching 70,000 motoristsper day.

Training Programs Cornejo & Sons and Summit Materials Inc.

“Entering and Exiting Work Zone Hazard Reduction”To reduce the risks associated with entering and exiting

work zones, Cornejo & Sons developed a color coded flagsystem to keep the public and workers safe when operatingwithin a work zone. The company distributed instructions onwindshield stickers and a training memo to all contractors,employees and third party groups to educate them on colorcodes for each flag. The team created and organized a saferwork zone by marking checkered flags at the exits and col-ored flags at various entrances to indicate the different deliv-ery points for materials. By clearly marking each entrance,and designating entrances for different types of vehicles,Cornejo & Sons decreased the hazard and congestion creat-ed by fleet trucks slowing to search for work zone entrances,leading to fewer employee accidents in work zones.

Innovations in TechnologyRoyal Truck & Equipment, Micro Systems Inc. and

Oldcastle Materials Group “The ATMA (AutonomousTruck Mounted Attenuator)”In collaboration with Micro Systems and Oldcastle

Materials, Royal Truck & Equipment developed the nextgeneration of roadway work zone safety — the innovativeATMA (autonomous truck mounted attenuator). At its core,a TMA Truck, or safety truck, serves as a protective crashbarrier, preventing vehicles from entering work zones andhelping to save workers’ lives. By outfitting the TMA truckwith driverless technology, drivers will be removed from thecab of one of the most dangerous vehicles to pilot. In addi-tion to being autonomous, the truck mimics the direction andspeed of a lead vehicle through the use of sensors and can becontrolled remotely through GPS Waypoint navigation. Twoautonomous trucks will make their debut as part of a high-way construction project in Florida by the end of the year.

(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

An overwhelming majority of construction firms reporttrouble finding qualified craft workers to fill key spots asdemand for construction continues to rebound in many partsof the country, according to the results of an industry-widesurvey released by the Associated General Contractors ofAmerica. Association officials called for new career andtechnical school programs, as well as other workforce meas-ures to offset the labor shortages that are forcing firms tochange how they operate and pose risks to workplace safety."Few firms across the country have been immune from

growing labor shortages in the construction industry," saidStephen Sandherr, chief executive officer of the AssociatedGeneral Contractors. "The sad fact is too few students arebeing exposed to construction careers or provided with thebasic skills needed to prepare for such a career path."Of the 1,358 survey respondents, 86 percent said they are

having difficulty filling hourly craft or salaried professionalpositions. Seventy-nine percent of responding firms nation-wide are having a hard time filling one or more of the 21hourly craft professional positions, particularly carpenters(73 percent of firms that employ carpenters report difficulty),sheet metal installers (65 percent) and concrete workers (63percent). In addition, 52 percent of firms are having a hardtime filling salaried professional positions, especially projectmanagers/supervisors (listed by 55 percent of firms thatemploy them), estimators (43 percent) and engineers (34 per-cent), noted AGC's chief economist, Ken Simonson.As labor shortages grow more severe, competition for

workers is heating up, Simonson added. He noted that 36percent of firms report losing hourly craft professionals toother local construction firms, and 21 percent to other indus-tries locally. Thirteen percent of responding firms report los-ing workers to construction firms in other locations.Growing competition for workers is prompting 56 percent

of firms to increase base pay rates for hourly craft profes-sionals. Moreover, 43 percent of firms have increased theirreliance on subcontractors because of tight labor conditions.And worker shortages also appear to be impacting safety,with 15 percent of firms reporting an increase in injuries andillnesses because of worker shortages, Simonson added.The association has updated its Preparing the Next

Generation of Skilled Construction Workers: A WorkforceDevelopment Plan to address the growing worker shortages,Sandherr noted. The plan outlines steps, such as increasingfunding for vocational education and making it easier toestablish construction-focused schools, to reinvigorate thepipeline for new construction workers. The plan also calls forcomprehensive immigration reform and measures to make iteasier to hire veterans.The survey was conducted in July and August. For more information, visit www.agc.org.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

Contractors Find itDifficult to Fill KeyCraft, Salaried Jobs

Page 57: Midwest 22 2015
Page 58: Midwest 22 2015

Page 58 • October 24, 2015 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

Model Engine Power Weight Engine Type

hp (kw) lbs. (kg)

TD7R74 (55)

19,032 (8,633)N/A

TD8R85 (63)

19,572 (8,878)N/A

TD9R93 (69)

21,372 (9,694)N/A

TD10R101 (75)

21,813 (9,894)N/A

TD14M LGP160 (119)

40,849 (18,529) N/A

TD14M LT160 (119)

38,699 (17,554)N/A

TD15M LT190 (141)

51,065 (23,163)N/A

TD15M LGP 6-WAY 190 (141)48,874 (22,169)

N/A

TD20M240 (179)

63,681 (28,886)N/A

TD25M330 (246)

94,494 (42,862)N/A

TD40E515 (384)

154,351 (70,014)N/A

TD15M LANDFILL190 (141)

53,461 (24,250)N/A

TD20M LANDFILL240 (179)

67,197 (30,481)N/A

TD25M LANDFILL330 (246)

95,418 (43,282)N/A

Loaders605K 110 (83) 26,940 (12,220) John Deere PowerTech PWX 4045 655K 145 (110) 40,614 (18,422) John Deere PowerTech PVX 6068755K 190 (141.7) 45,178 (20,492) John Deere PowerTech PVX 6068 Dozers450J 70 (52) 16,283-17,525 (7,386-7,949) John Deere PowerTech M 4045550K 92 (69) 19,640-20,622 (8908-9354) John Deere PowerTech PWX 4045650K 104 (78) 19,949-20,974 (9049-9514) John Deere PowerTech PWX 4045700K 130 (97) 30,275-31,290 (13,733-14,193) John Deere PowerTech PVX 6068750K 165 (123) 34,527-37,745 (15,661-17,121) John Deere PowerTech PVX 6068850K 205 (152) 42,558-48,005 (19,304-21,775) John Deere PowerTech PVX 6068 850K WH 200 (151) 48,906 (22,183) John Deere PowerTech PVX 60681050K 350 (261) 94,300-95,000 (42,800-43,100) John Deere PowerTech PSS 6135

DRESSTA

Model Engine Power Weight Engine Type

hp (kw) lbs. (kg)

Model Engine Power Weight Engine Typehp (kw) lbs. (kg)

D51PXi-2229,057 (13,208)

130 (97)Komatsu SA6D107E-1

D61EX-2440,830 (18,520)

168 (125)Komatsu SAA6D107E-

3

D61EXi-2339,441 (17,890)

168 (125)Komatsu SAA6D107E-

2

D61PX-2442,904 (19,460)

168 (125)Komatsu SAA6D107E-

3

D61PXi-2341,381 (18,770)

168 (125)Komatsu SAA6D107E-

2

D65EX-1848,796 (22,180)

217 (162)Komatsu SAA6D114E-

6

D65WX-17 45,945 (20,840)205 (153)

Komatsu SAA6D114E-5

D65PX-1851,960 (23,659)

217 (162)Komatsu SAA6D114E-

6

D65EXi-1845,780 (20810)

217 (162)Komatsu SAA6D114E-

7

D65PXi-1850,420 (22960)

217 (162)Komatsu SAA6D114E-

7

D65EX-18 WH 48,898 (22180)217 (162)

Komatsu SAA6D114E-7

D65WX-17 WH 54,835 (24,873)205 (153)

Komatsu SAA6D114E-5

D85EX-1868,165 (30920)

264 (197)Komatsu SAA6D125E-

7

D85PX-1863,800 (28940)

264 (197)Komatsu SAA6D125E-

7

D155AX-7 WH 91,515 (41,510)354 (264)

Komatsu SAA6D140E-6

D155AX-889,300 (40500)

354 (264)Komatsu SAA6D140E-

7

D155AXi-890,610 (41100)

354 (264)Komatsu SAA6D140E-

7

D275AX-5E0113,600 (51,530)

449 (335)Komatsu SAA6D140E-

5

D275AX-5E0 SL116,528 (52,856)

449 (335)Komatsu SAA6D140E-

5

D375A-6157,940 (71,640)

610 (455)Komatsu SA6D170E-5

D475A-5E0238,960 (108,390

) 890 (664) Komatsu SDA12V140E-3

D475ASD-5E0249,560 (113,200

) 890 (664) Komatsu SDA12V140E-3

WH: Wate Handler

SL: Sanitary Landfill

KOMATSU

JOHN DEEREModel Engine Power Weight Engine Typehp (kw) lbs. (kg)650L LGP 74 (55) 17,550 (7,959) CASE 445TA/EG7a Tier III650L LT 74 (55) 16,250 (7,370) CASE 445TA/EG7a Tier III650L WT 74 (55) 16,800 (7,619) CASE 445TA/EG7a Tier III750M LGP 92 (66) 21,180 (9,607) CASE F5HFL413J Tier IV Interim750M WT 92 (66) 20,679 (9,379) CASE F5HFL413J Tier IV Interim750M LT 92 (66) 20,040 (9,089) CASE F5HFL413J Tier IV Interim850M LGP 112 (84) 22,830 (10,355) CASE F4HFE413P Tier IV Interim850M WT 112 (84) 22,330 (10,129) CASE F4HFE413P Tier IV Interim850M LT 112 (84) 21,560 (9,779) CASE F4HFE413P Tier IV Interim1150M LGP 127 (95) 32,637 (14,804) CASE F4HFE613F Tier IV Interim1150M WT 127 (95) 32,174 (14,594) CASE F4HFE613F Tier IV Interim1150M LT 127 (95) 31,134 (14,122) CASE F4HFE613F Tier IV Interim1650M LGP 150 (112) 39,550 (17,939) CASE F4HFE6132 Tier IV Interim1650M WT 150 (112) 38,650 (17,531) CASE F4HFE6132 Tier IV Interim1650M XLT 150 (112) 37,750 (17,123) CASE F4HFE6132 Tier IV Interim2050M LGP 214 (160) 48,773 (22,123) CASE F4HFE613W Tier IV Interim2050M WT 214 (160) 46,891 (21,269) CASE F4HFE613W Tier IV Interim2050M XLT 214 (160) 45,414 (20,599) CASE F4HFE613W Tier IV Interim2050M LT 214 (160) 44,563 (20,213) CASE F4HFE613W Tier IV Interim

CASE

Model Engine Power Weight Engine Type

hp (kw) lbs. (kg)LIEBHERR

Crawler Loaders

LR 624141 (105) 37,245-40,893 (16

,894-18,549)D 934 S A6

LR 636181 (135) 45,327-50,305 (20

,746-22,694)D 934 A7

DozersPR 724

163 (120) 37,038-44,754 (16,659-18,024)

D 934 L A6

PR 736201 (150) 44,750-54,230 (20

,200-24,600)D 934 A7

PR 746248 (185) 62,370-67,900 (28

,900-30,800)D 936 A7

PR 756336 (250) 84,430-90,720 (38

,300-41,150)D 946 A7

PR 764416 (310) 97,490-116,150 (4

4,220-52,685)D 9508 A7

see CHART page 62

Page 59: Midwest 22 2015

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 24, 2015 • Page 59

Page 60: Midwest 22 2015

Page 60 • October 24, 2015 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

BRANDEIS MACHINERY & SUPPLY COMPANYwww.brandeismachinery.com1801 Watterson Tr.Louisville, KY 40299502/491-4000502/499-3195 Fax Evansville, IN812/425-4491812/425-1171 Fax Corbin, KY606/528-3700606/528-9014 Fax Lexington, KY859/259-3456859/254-0783 Fax Stanville, KY606/478-9201606/478-9208 Fax Paducah, KY270/444-8390270/575-4907 Fax Indianapolis, IN317/872-8410317/872-8417 Fax Ft.Wayne, IN260/489-4551260/489-1620 Fax

CONTINENTAL EQUIPMENT CORP.A division of AISwww.ceceq.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000517/321-4191 Fax

ROAD BUILDERSMACHINERY & SUPPLY CO., INC.1001 S. 7th St.Kansas City, KS 66105913/371-3822913/371-3870 FaxOmaha, NE402/331-9200Lincoln, NE402/325-0447Grand Island, NE308/384-2620

ROAD MACHINERY & SUPPLIES CO.www.rmsequipment.com5633 W Hwy 13Savage MN 55378952/895-9595800/888-9515Duluth, MN 218/727-8611800/888-9535Virginia MN218/741-9011800/752-4304Des Moines IA515/282-0404800/555-1445Sioux City IA712/252-0538800/633-9104Cedar Rapids IA319/363-9655800/616-6615Milan, IL309/787-1742800/633-9114

Cat 963K Track Loader Offers Fuel,Performance Improvements

The track loader has long been known as a machine thatcan do it all on the job site, and it is often the first machinethat can go to work in soft, wet underfoot conditions. The Cat963K offers that legendary versatility, along with a 10 to 30percent gain in fuel efficiency and improved performance.The new track loader also offers updated cab and safety fea-tures for the comfort and convenience of the operator. The963K meets U.S. EPA Tier IV Final emission standards.

More Efficiency and Productivity = Lower Costs

The 963K is powered by a 193 hp (144 kW) Cat C7.1ACERT engine, offering fuel efficiency improvements overthe previous model. An eco mode automatically reducesengine speed, but maintains selected ground speed when themachine is under light load. The more efficient engine andthe eco mode combine to deliver a 10 to 30 percent reduc-tion in fuel consumption compared to the 963D. And effi-cient use of diesel exhaust fluid (DEF) — typically 2.5 to 3percent of fuel consumption — provides excellent overallfluid efficiency.

The 963K offers additional productivity with an optionalhigh retention bucket that moves 5 percent more material perhour. For added versatility, the machine can be ordered withan optional Fusion quick coupler to allow easy use of forks,buckets, etc. from wheel loaders and other Fusion compati-ble machines.

The Caterpillar telematics system, Product Link is deeplyintegrated into the 963K, giving easy access to timely infor-mation like machine location, hours, fuel usage, idle timeand event codes via the online VisionLink user interface.

Performance EnhancementsThe C7.1 ACERT engine is equipped with a twin turbo,

providing faster machine response under load. Smarter

power train management on the 963K offers smootherimplement and steering response, and improved steering per-formance over the previous model. Power reaches theground more efficiently based on the demands of the appli-cation, giving you fast acceleration and shorter cycle times.Features like load sensing hydraulics and position sensingcylinders add to the machine’s precision and response.

Ease of OperationThe updated cab offers operator comforts like suspension

seat, adjustable armrests and controls, and an improved airconditioning system. Engine noise is reduced compared tothe 963D, resulting in a quieter environment for the operatorand for others around the work site.

The machine can be ordered with either v-lever or joysticksteering to match operator preference. Selectable electro-hydraulic mapping lets you set implement response to fine,normal or coarse to match operator preferences and tailor themachine to individual applications.

The Cat Tier IV Final emissions technology is designed tobe transparent — with no action required from the operatorand no need to stop for regeneration. Diesel exhaust fluid(DEF) fill is located at ground level, next to the fuel tank, forconvenient access when you refuel.

Operator safety is enhanced as well, with added handlesand steps to help operators climb on and off the machinemore easily, from the front or the back of the tracks.

The 963K maintains its reputation for ease of service too,with a tilt cab and convenient service access points for easi-er maintenance and repair. The demand fan provides effi-cient cooling, plus features a swing-out grill door and fold-down fan to help make cleanout quick and easy.

For more information, visit www.cat.com.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

The 963K offers additional productivity with an optional high retention bucket that moves 5 percent more mate-rial per hour. For added versatility, the machine can be ordered with an optional Fusion quick coupler to alloweasy use of forks, buckets, etc. from wheel loaders and other Fusion compatible machines.

Page 61: Midwest 22 2015

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 24, 2015 • Page 61

MADE WITH PASSION AND PRIDE

ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711Bolingbrook, IL630/739-7474Carterville, IL618/985-3399Marengo, IL815/923-4966Portage, IN219/764-8080Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056DePere, WI920/532-0165920/532-0526 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville, WI 262/835-2710262/835-2844 Fax Schofield, WI715/355-9898715/241-0044 Fax

GENERAL EQUIPMENT& SUPPLIESwww.genequip.com4300 Main AveFargo, ND 58103800/437-2924701/364-2190 Fax 905 20th Avenue SEMinot ND, 58701800/852-04793500 Apple Creek RoadBismarck, ND 58504800/279-44374082 2nd Ave. WWilliston, ND 58801701/572-0570

Page 62: Midwest 22 2015

Page 62 • October 24, 2015 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

Komatsu D65PXi-18 Crawler Dozer Excels in Wet ConditionsKomatsu America Corp. has introduced the

D65PXi-18, the latest addition to the next generationof intelligent machine control and dozer technology. The long track, low ground pressure D65PXi-18

excels in soft or wet conditions and offers added sta-bility for finish grading applications. It features astronger, 217-hp, SAA6D114E-6, EPA Tier IV Finalemissions certified engine that is environmentallyfriendly and provides high levels of performancewhile reducing fuel consumption and operating costs,according to the manufacturer. “From first to last pass — rough cut to finish grade

— the machine senses blade load, minimizes trackslip and ensures operators get the most from everypush,” said Jason Anetsberger, Komatsu productmanager. “We believe the difference in dozing effi-ciency between conventional machine operation andintelligent machine control technology is exception-al.”

Innovative Integrated IntelligentThe D65PXi-18 intelligent machine control system

allows automated operation from heavy dozing to fine grad-ing, achieving up to 8 percent greater efficiency in movingmaterial, based on start-to-finish grade testing of typical after-market machine control systems. The lack of blade mountedsensors and components means there is no need for operatorsto climb on the blade to install/remove GNSS antennas, nocoiled cables to snag and no electrical connections to slow thestart and end of every shift.

A ‘Deal’ Versus Long-Term Value Simple math: by skipping the cables, and the climbing and

connections common with aftermarket systems, operatorssave 15 minutes at the start and finish of each day. A 30-min-utes-a-day savings for 20 days a month is 10 saved hours permonth. In this scenario, savings add up fast. Production andsavings accrued from 10 extra hours a month over five toseven years of ownership should be factored into any com-

parison of up-front price or total cost of ownership.

Fuel Sipping ProductivityAn automatic gearshift transmission and lock up

torque converter selects the optimal gear range dependingon jobsite conditions and load for maximum operationefficiency. This electronically controlled transmissionlocks up the torque converter to transfer engine powerdirectly to the transmission, eliminating horsepower lossand cutting fuel consumption by up to 10 percent.

Comfortable RideThe D65PXi-18 ROPS certified, pressurized cab has

wide, tall windows and superb sealing for outstandingvisibility and less noise and dust inside the cab. TheD65PXi-18 cab damper mounts isolate the cab from themachine frame, softening shocks and vibrations and pro-viding superior operator comfort, according to the man-ufacturer. The D65PXi-18 and every other Komatsu Tier IV

Final construction-sized machine, whether rented, leasedor purchased, is covered by the Komatsu CARE pro-

gram for the first three years or 2,000 hours, whichever comesfirst. Komatsu CARE includes scheduled factory mainte-nance, a 50-point inspection at each service and two compli-mentary Komatsu diesel particulate filter exchanges and DEFtank flushes in the first five years.For more information, visit www.komatsuamerica.com.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

The long track, low ground pressure D65PXi-18 excels in soft orwet conditions and offers added stability for finish grading appli-cations.

Model Engine Power Weight Engine Type

hp (kw) lbs. (kg)

CATERPILLAR

Crawler Dozers LGP

D6K2 LGP 130 (97) 30,574 (13,868) Cat C6.6 ACERT

D6N DS-LGP (Tier IVi) 150 (112) 39,646 (17,983) Cat C6.6 ACERT

D6N DS-LGP waste handler (Tier IVi)150 (112) 42,988 (19,494) Cat C6.6 ACERT

D6T LGP (Tier IV Final) 207 (154) 50,490 (22,902) Cat C9.3 ACERT

D6T LGP waste handler (Tier IV Final)207 (154) 55,792 (25,307) Cat C9.3 ACERT

D7E LGP (Tier IV Final) 238 (177) 62,886 (28,525) Cat C9.3 ACERT

D7E LGP waste handler (Tier IV Final)238 (177) 68,123 (30,900) Cat C9.3 ACERT

D8T LGP (Tier IV Final) 312 (233) 82,496 (37,420) Cat C15 ACERT

D8T LGP waste handler (Tier IV Final)312 (233) 91,270 (41,399) Cat C15 ACERT

D3K2 LGP 80 (60) 18,442 (8,365) Cat C4.4 ACERT

D4K2 LGP 92 (69) 18,686 (8,476) Cat C4.4 ACERT

D5K2 LGP 104 (78) 20,992 (9,522) Cat C4.4 ACERT

Model Engine Power Weight Engine Type

hp (kw) lbs. (kg)

CATERPILLAR CONT.

Crawler Dozers Non LGP

D6K2 XL 130 (97) 29,346 (13,311) Cat C6.6 ACERT

D6N XL Tier IVi 150 (112) 36,392 (16,507) Cat C6.6 ACERT

D6N XL Waste Handler Tier IVi 150 (112) 38,224 (17,338) Cat C6.6 ACERT

D6T XL (Tier IVF) 207 (154) 46,263 (20,985) Cat C9.3 ACERT

D6T XL Waste Handler (Tier IVF) 207 (154) 51,563 (23,389) Cat C9.3 ACERT

D6T XW (Tier IVF) 207 (154) 48,034 (21,788) Cat C9.3 ACERT

D7E (Tier IV Final) 238 (177) 57,441 (26,055) Cat C9.3 ACERT

D7E Waste Handler (Tier IV Final)238 (177) 63,537 (28,820) Cat C9.3 ACERT

D8T (Tier IV Final) 312 (233) 86,900 (39,417) Cat C15 ACERT

D8T Waste Handler (Tier IV Final)312 (233) 85,650 (38,850) Cat C15 ACERT

D9T410 (306) 94,265 (42,758) Cat C18 ACERT

D9T Waste Handler 410 (306) 109,705 (49,761) Cat C18 ACERT

D9T (Tier IV F) 436 (325) 95,917 (43,507) Cat C18 ACERT

D9T Waste Handler (Tier IVF) 436 (325) 110,471 (50,109) Cat C18 ACERT

D10T2600 (447) 139,010 (63,054) Cat C27 ACERT

D11T850 (634) 208,589 (94,614) Cat C32 ACERT

D11T CD 850 (634) 220,385 (99,965) Cat C32 ACERT

D3K2 XL 80 (60) 17,465 (7,922) Cat C4.4 ACERT

D4K2 XL 92 (69) 18,007 (8,168) Cat C4.4 ACERT

D5K2 XL 104 (78) 20,313 (9,214) Cat C4.4 ACERT

CHART from page 58

Page 63: Midwest 22 2015

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 24, 2015 • Page 63

Komatsu Launches D61i-23 Intelligent Machine Control DozerKomatsu America Corp.’s D61EXi/PXi-

23 intelligent Machine Control dozer has afully automatic blade control and can per-form not only finish grading, which has beenpossible with conventional machine control,but also rough dozing. This is the firstmachine using this new technology, and it isscalable to other products manufactured byKomatsu.“We are excited to bring to market the

next generation of machine control technol-ogy with Komatsu’s intelligent MachineControl D61i-23,” said Peter Robson, direc-tor of Intelligent Machine Controls. “Theease with which the D61i-23 transitionsfrom rough dozing to finish grading withautomatic blade control engaged is so seam-less that both experienced and inexperiencedoperators will notice benefits. “The efficiency improvement, greater

value and simplicity of operation of theD61i-23 exemplify the leading innovationsthat customers have come to expect fromKomatsu.”Longer track-on ground standard (EX)

and low ground pressure (PX) models areavailable to offer customers flotation andweight distribution options that best matchtheir applications. Operating weights rangefrom 39,441 to 41,381 lbs. (17,890 to 18,770kg) depending on the configuration with anet 168 hp (125 kW) at 2,200 rpm.The D61i-23 also features the integration

of Komatsu's Komtrax (Komatsu machinetracking system) and Topcon’s constructionmanagement system. In the near future, thisintegrated system will enable high-efficien-cy, unified management of constructionwork through access to real-time machinedata, via its web service, to track workprogress including the amount of soil dozedat job sites, according to the manufacturer.

Fully Automatic Blade Control forRough, Fine Dozing

While crawler dozers have been able toperform high-precision finish grading afterinstalling an add-on machine control system,the D61i-23 can perform rough dozing aswell as finish grading in automatic mode,due to its fully automatic blade control.When rough dozing, the automatic bladecontrol monitors blade load and adjustsblade elevation to minimize track slip andperform high-efficiency dozing. As workprogresses closer to the target finish grade,the automatic blade control adjusts accord-ingly to provide finish grade performancewith high-level precision. Improvement incombination rough dozing efficiency is up to13 percent higher compared to add-onmachine control systems.“The innovation is not only that Komatsu

can provide the customer with fully auto-matic blade control for automatic rough doz-

ing and efficiency improvement,” saidRobson, ”but also that Komatsu is able tooffer this technology while maintaining fin-ish grade performance in the D61 dozer sizeclass which is one of the most popular sizeclass dozers for machine control usage.”

Standard Factory InstalledIntegrated Machine Control

SystemWith the D61EXi/PXi-23, typical add-on

machine control system components mount-ed on the blade have been replaced with fac-tory installed cab top GNSS (global naviga-tion satellite system) antenna, enhanced iner-tial measuring unit (IMU+), and stroke sens-ing hydraulic cylinders. These componentsalong with the machine control monitor andcontrollers mounted inside of the cab areinstalled at the Komatsu manufacturingfacility during machine assembly. “The integrated sensor package is not

only robust and accurate but also eliminatesthe daily hassles of installing/removingGNSS antenna(s) and cable(s) from theblade, plus the wear associated with it,” saidRobson. “The famed quality and customersupport our customers have come to rely onwith Komatsu machines is now extended tothe machine control system itself in the caseof the D61i-23.”

Enhancements for OptimizedPerformance

Inside the cab, customer selectable dozingmodes allow system response to be tailoredto the current machine operation for opti-mized performance. Similarly, blade loadsettings are adjustable between pre-sets tomatch actual material conditions. Pass topass, the intelligent Machine Control systemcan be left with the automatic blade controlengaged because of its ability to preciselyautomate the lowering of the blade at thestart of a pass and raise it at the end of a pass.When the machine travels around the job

site, the cab top GNSS antenna collectsaccurate surface data by measuring actualelevations. The stroke sensing angle cylindermeasures the actual angle of the blade forhigh precision grading accuracy on cross-slope, blade angled or not.“The included value of all the added intel-

ligence features on top of innovation andintegration really drives up the value propo-sition, for both existing machine controlusers and new machine control users,”Robson said.

KomtraxThe D61i-23 crawler dozer is equipped

with the latest Komtrax technology, which isfully integrated with Komatsu’s Tier IVtechnology and sends machine operating

information to a secure Web site utilizingwireless technology. Hour meter, location,cautions, load ratio, fuel consumption andmaintenance alerts — to name a few of itsfeatures — are relayed to the web applica-tion for analysis. The Komtrax fleet moni-toring system increases machine availability,reduces the risk of machine theft (comparedto machines not Komtrax-equipped), allowsfor remote diagnosis by the distributor, andprovides a wealth of other information todrive business efficiency and productivity.

Komatsu CareKomatsu remains focused on lowering

the customer’s ownership costs by engineer-ing machines with increased fuel efficiencyand productivity. Komatsu Care complimen-tary scheduled maintenance is standard onthe D61EXi/PXi-23 crawler dozers for theearlier of 3 years or 2,000 hours. Services areperformed by factory certified techniciansusing only Komatsu genuine parts and flu-ids. Also included are complimentary KDPFexchanges at 4,500 hours and 9,000 hours inthe first five years.For more information, visit www.komat-

suamerica.com.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Komatsu’s D61EXi/PXi-23 intelligent Machine Control dozer has a fully automatic blade control and can perform not only fin-ish grading, but also rough dozing.

Page 64: Midwest 22 2015

Page 64 • October 24, 2015 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

Bridgeport, MI989/777-0090

Grand Rapids, MI616/538-2400

Lenox, MI586/727-7502

New Hudson, MI248/437-8121

Williamsburg, MI231/267-5060

www.westsidetractorsales.comNaperville, IL630/355-7150

Rockdale, IL815/730-9011

Rockford, IL 815/961-3160

South Holland, IL708/331-6362

Wauconda, IL847/526-7700

Bloomington, IN812/333-9677

Fort Wayne, IN260/482-8576

Indianapolis, IN317/544-3411

Lafayette, IN765/447-6933

South Bend, IN574/232-1461

www.brookstractor.comSun Prairie, WI608/837-5141

Milwaukee, WI414/462-9790

De Pere, WI920/336-5711

West Salem, WI608/786-2644

Plover, WI715-254-2777

Coming 2016Mt. Pleasant, WI

www.nortrax.comAshland, WI

715/682-5522

Chippewa Falls, WI715/834-2924

Monico, WI715/487-5583

Mosinee, WI715/693-3820

Duluth, MN218/722-7456

Bemidji, MN218/759-1996

Grand Rapids, MN218/326-9427

Escanaba, MI906/789-9054

www.erbequipment.comFenton, MO

636/349-0200

Foristell, MO636/463-2500

Cape Girardeau, MO573/334-0563

Cuba, MO573/885-0500

Owensboro, KY270/684-2339

Paducah, KY270/554-1131

Mount Vernon, IL618/244-6800

Evansville, IN812/473-0484

www.meadetractor.comBowling Green, KY

270/842-3400

London, KY606/862-8447

Louisville, KY502/253-3721

Richmond, KY859/623-2030

Chattanooga, TN423/855-0633

Kingsport, TN423/349-5001

Knoxville, TN865/546-3207

La Vergne, TN (Nashville)615/501-8600

Dressta Launches TD9 Crawler DozerIn response to customer demand,

Dressta is unveiling the TD9 hydrostat-ic crawler dozer. This new high-per-formance, compact crawler dozer hasbeen developed by Dressta’s team ofengineers, and is the first of three newmodels that range from 74 to 101 nethp.The new model has been validated

by expert operators at a series of pre-launch performance trials at the Dresstaproving grounds in Poland. The TD9,due to be launched in the third quarterof 2015, was presented to equip-ment owners and dozer operatorsfrom the key markets of NorthAmerica and Canada. They put theiron to the test in a series of chal-lenging trials designed to push theperformance of the new hydrostat-ic dozers to the limit, and providedtheir feedback to help fine-tune themachine’s performance.“The operators’ input in regards

to ergonomics and command ofcontrol played a key role in refin-ing the design. As a result, the low-effort controls for the blade anddual path hydrostatic drivetraindeliver the required response in allapplications of machine perform-ance,” said Howard Dale, globalvice president of sales at Dressta.The key components of the new

models are from worldwiderenowned suppliers such asCummins and Rexroth, while thestructural design and DNA are a naturalprogression of Dressta’s decades ofexperience in building crawler dozersand other construction equipment.

Optimal Power and FuelEfficiency

The three models are equipped withCummins Tier IV Final engines andcover a horsepower range of 74 to 101net hp. This engine technology featuresultra-clean aftertreatment systemswhile simultaneously providing fuelefficiency.Power, performance, reliability and

durability are the critical factors for thepower unit in a crawler dozer. With theCummins Tier IV Final engine, thenew Dressta models meet these criteriacomfortably, with the additional bene-fits of enhanced productivity and areduction in overall operating costs,according to the manufacturer.

Dual Path Hydrostatic DriveDelivers Maximum

ProductivityDressta’s variable bi-directional dual

path hydrostatic drive is controlled by aprogrammable electronic control mod-ule. This provides the perfect matchbetween load and ground speed,regardless of the ground condition orspecific dozing application. The resultensures that operators have full com-mand during the most challenging oftasks, such as when dozing with a fullload or performing precise final gradeoperations.The operators have the ability to

adjust the presets of the tractor to meet

the requirements of the task at hand.They can choose to program variablessuch as forward to reverse speed ratio,or enable “power” “normal” and“economy” modes depending on thejob conditions. The versatility tochoose between different modes andthe flexible speed control provide bothenhanced productivity and grade accu-racy.Independent track control delivers

the required speed changes to each sideand allows for smooth, full-powerturns. Onsite maneuverability and jobperformance are further strengthenedby the stable counter-rotation feature,while the low center of gravity deliversstable and safe operation when work-ing on slopes or in rugged terrain.

Safe and Comfortable Cabfor a Fresh and Productive

OperatorThe ergonomics of the cab and an

intuitive, highly-responsive controlsystem make operating the new TD9 adelight for the operator. Dressta under-stand that the ease of command and

control creates a better working envi-ronment and thus increases productivi-ty.A newly designed ISO-mounted

operator cab with positive pressure fea-tures a comfortable interior space thatis protected by a robust external ROPSfor optimal safety. A fully adjustableoperator seat provides the user withample leg room and ease of access toall controls.The cabin’s large glass windows

provide increased for-and-aft visibilityto the outside environment,blade corners and rear of thetracks — an essentialrequirement for compactmachines in terms of bothsafety and productivity.Control grips have been

designed so that the user cancomfortably operate themachine for hours, and aredesigned for the ease ofoperation whether wearingheavy gloves or not. Thehand wrap controls aredesigned to reduce the riskof the operator’s hands slip-ping from the levers, particu-larly when working in haz-ardous environments such ason steep slopes — a furtherexample of Dressta’s atten-tion to detail in risk reduc-tion.The new heating and air

conditioning system features multiplevents to provide large volumes of freshair quietly and efficiently in order tomaintain the operator’s desired work-ing temperature.But as well as providing a comfort-

able internal environment, Dressta hasdeveloped the machine to be highlyresponsive to the operator’s wishes.Ensuring the crawler dozer performs asa mechanical extension of the opera-tor’s skill was an essential considera-tion in the design. In achieving this, thehydraulic controls have been tuned toperform seamlessly at the command ofthe operator so they can perform longhours of fatigue-free usage.For the additional benefit of the

operator, the machines are suppliedboth GPS and Trimble-ready to helpthem achieve the requirements of anygiven task.For more information, visit

www.dressta.com.pl.(This story also can be found on

Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)

The TD9 hydrostatic crawler dozer is the first ofthree new models that range from 74 to 101 net hp.

Page 65: Midwest 22 2015

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 24, 2015 • Page 65

THE STRONG, SILENT TYPE.

Featuring an ultra-quiet, redesigned operator station, the 755K Crawler Loader quietly goes about itsbusiness, letting its impressive performance do the talking. More weight, power, hydraulic flow, bucketcapacity, and breakout force significantly boost productivity. Customer-inspired enhancements includemore control options, from V-pattern with steering pedals to joystick FNR. An innovative on-demandcooling system with optional hydraulic reversing fan. And quicker daily checks and less frequentperiodic maintenance. Plus its IT4 diesel meets rigid emission standards, so you can work the 755Kwherever there’s work, even in nonattainment areas. It’s the perfect machine for those who preferless talk and more action.

Page 66: Midwest 22 2015

Page 66 • October 24, 2015 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

1050K Crawler — Most Powerful Dozer for John DeereDesigned and built in Dubuque, Iowa, the

1050K crawler dozer is the largest, mostpowerful dozer ever built by John Deere.Utilizing years of research and extensivecustomer feedback, the 1050K has the dura-bility, reliability, and productivity needed formining, quarrying, road building, and otherlarge-scale applications, according to thecompany.“The 1050K is a new generation of

crawler dozer that provides the uptime, lowdaily operating costs, and productivity need-ed on today’s job site,” said Mark Oliver,crawler dozers product marketing manager,John Deere Construction & Forestry.“Customer feedback was vital in developingthis game-changing dozer. This is a Deere-designed machine that is fully supported byJohn Deere dealers and it’s unlike anycrawler dozer our customers have ever seenin this size class.” The 1050K incorporates an EPA Final

Tier IV/EU Stage IV PowerTech dieselengine with 350 hp (261 kW). Completelyredesigned from the ground up, the 1050K’sdual-path hydrostatic transmission allows anoperator to push a full load through turnswithout losing material, unlike torque-con-verter transmissions. Like the smaller 850K, the 1050K fea-

tures Eco mode. The Eco mode feature opti-mizes fuel economy while maintainingground speed by automatically adjustingengine speed and transmission settingsbased on load. This has the potential toreduce fuel consumption up to 25 percentwith no loss in productivity in many applica-tions, according to the company.Operators don’t have to worry about

diesel particulate filter (DPF) cleaning as itstill occurs automatically with no impact tomachine operation. Ash service intervals forthe diesel particulate filter are conditionbased, meaning the machine will notify theoperator before service is required.Typically, ash service is not necessary untilthe first engine overhaul. Extensive testingallowed John Deere’s DPF to go up to15,000 hours before ash removal. The1050K also features excellent total fluideconomy (diesel fuel and diesel exhaustfluid (DEF)).The production-class dozer’s heavy-duty

undercarriage is sealed, lubricated and builtto last. Its oval-track design has only onewear-causing forward-travel flex point, forlonger life. One-piece welded maintenanceresists torsional stress, absorbs shock loads,and delivers maximum strength while allow-ing easy service access to major compo-nents. For added durability, heavy-duty dou-ble-reduction planetary final drives aremounted independent of the track frames,where they’re effectively protected fromshock loads.

Inside the cab, a deluxe suspension high-back seat is angled 15 degrees to provide amore comfortable view of the ripper andadjusts seven ways for daylong comfort. Anupdated LCD display monitor providesenhanced onboard diagnostics with real timevalues for every temperature, pressure, andspeed sensor on the machine. The crawlerdozers constantly monitor transmission tem-perature to avoid damage to the hydrostatsystem. Before tackling the job site, operators can

set the maximum desired ground speed, andthe power management system automatical-ly maintains peak engine RPM and powerefficiency without stalling or shifting. Anergonomically correct joystick providesintuitive, low-effort control of steering,direction, and groundspeed. A total machinecontrol (TMC) monitor allows an operator toselect decelerator mode and response — for-ward/reverse groundspeed ranges, steering

modulation, F-N-R shift rate, andforward/reverse speed ratios. A hydraulic power-pitch option allows the

operator to control blade pitch from the cab.The blade pitch also is adjustable to threemount locations for performance in a varietyof applications and materials. The program-mable return-to-pitch settings allows theoperator to preset blade-pitch positions,which can be activated with the push of abutton.The 1050K’s controls can be customized

to meet the individual needs of an operator.The decelerator can slow both ground-speedand engine RPM, or with the touch of a but-ton, control ground-speed only, to helpmaintain traction without affecting enginepower and hydraulic response. Fullydepressing the pedal applies the brakes.With standard electro-hydraulic (EH)

controls, all 1050K dozers are grade-controlready making adding a grade-control system

as easy as plugging in the components, cali-brating and going to work. John Deere’s“open-architecture” design lets customerseasily employ their favorite brand of grade-control system — Trimble, Topcon, orLeica. The 1050K also can have a Topcon3D-MC2 grade control system installed atthe factory for faster availability and the abil-ity to finance the system with the dozer pur-chase."The 1050K is 100 percent John Deere

and it’s a total machine,” said Dave Rock,equipment asset manager, SurewayConstruction. “When providing our feed-back, we wanted the hood lower, we wantedto better see the ripper, and the dealers had tobe behind this machine for parts, service,sales — everything.”Operators looking to get the most out of

their 1050K can rely on Ultimate Uptimefeaturing John Deere WorkSight. WithUltimate Uptime, operators receive pre-delivery and follow-up inspections; threeyears of JDLink telematics, machine heathprognostics, and remote diagnostics and pro-gramming capability; and the ability to addadditional dealer-provided uptime solutionsto customize the package to individual needs.For more information, visit

JohnDeere.com. (This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

“The 1050K is a new generation of crawler dozer thatprovides the uptime, low daily operating costs, andproductivity needed on today’s job site.”

Mark OliverJohn Deere Construction & Forestry

Completely redesigned from the ground up, the 1050K’s dual-path hydrostatic transmission allows an operator to push a fullload through turns without losing material, unlike torque-converter transmissions.

Page 67: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 67

ILLINOISDiamond Equipment

17035 N. Illinois Hwy. 37Mt. Vernon, IL 62864

618-242-2273800-388-6396

Fax: 618-242-9161www.diamondequipment.com

Martin Implement Sales, Inc.18405 115th Avenue

Orland Park, IL 60467708-349-8430

Fax: 708-349-4230

420 Nolen DriveSouth Elgin, IL 60177

630-883-3320Fax: 847-695-9105

26354 N US Highway 12Wauconda, IL 60084

847-469-0120Fax: 847-526-8054

www.martinimplement.com

KENTUCKYDiamond Equipment

1046 Lovers LaneBowling Green, KY 42103

270-781-1061800-489-1061

Fax: 270-781-0907

Team Boone150 Schuler Dr.

Bardstown, KY 40004502-348-7573

Fax: 502-348-4401www.teamboone.net

Diamond Equipment1060 Diamond Ave.Evansville, IN 47711

812-425-4428dmfortune

@diamondequipment.comwww.diamondequipment.com

2000 Harlan DriveTerry Haute, IN 47802

812-299-4747888-343-4747

Fax: 812-299-3687

Hardings Heavy Equipment109 W. Commercial Ave.

Lowell, IN 46356219-696-8911

[email protected]

Southeastern Equipment Co., Inc.

3333 W. Coliseum Blvd.Fort Wayne, IN 46808

260-483-8868

4951 West 96th StreetIndianapolis, IN 46268

317-872-4877www.southeasternequip.com

Rueter’swww.rueterco.com

1132 31st Ave.Council Bluffs, IA 51401

712-366-5221Fax: 712-366-5228

5815 Lincoln WayAmes, IA 50014

515-268-0939Fax: 515-268-0943

Hwy 30 WestGrand Junction, IA 50107

515-738-2571Fax: 515-738-2343

Hwy 30 EastCarroll, IA 51401

712-792-9294Fax: 712-792-6808

2425 NE 126th Ave.Elkhart, IA 50073

515-367-3054

KANSASThe Victor L. Phillips Co.

www.vlpco.com3250 N. Hydraulic St.Witchita, KS 67219

316-838-3347

1305 SW 42nd St.Topeka, KS 66609

785-267-4345

2203 W. Jones Ave.Garden City, KS 67846

620-275-1996

MICHIGANMidland Engine

622 Jefferson Ave.Midland, MI 48640

989-631-4608www.midlandengine.com

Buck & Knobby Equipment Co., Inc.

6220 Sterns Rd.Ottawa Lake, MI 49267

MI: 734-856-2811OH: 419-476-5293Fax: 734-856-2709

www.buckandknobby.com

MISSOURIThe Victor L. Phillips Co.

www.vlpco.com4100 Gardner Ave.

Kansas City, MO 64120816-241-9290

5430 Missouri 43Joplin, MO 64804

417-781-8222

6330 W. Highway 60Brookline Station, MO 65619

417-887-2729

NEBRASKARueter’s

www.rueterco.comE. Hwy 275

Neligh, NE 68756402-917-5604

Fax: 402-887-5638

IOWAINDIANA

Page 68: Midwest 22 2015

Page 68 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sievers JCB406 Old Rt 66Hamel, IL 62046618-633-2622

8080 State Rt 16Hillsboro, IL 62049217-532-3222

State Route 267 SouthGreenfield, IL 62044217-368-2486

14464 Shad RdCarlinville, IL 62626217-854-3191

1351 W Jackson StAuburn, IL 62615217-438-6111www.sieversjcb.com

Rueter’s1132 31st AveCouncil Bluffs, IA 51401712-366-5221

2425 NE 126th AveElkhart, IA 50073515-367-3054

5815 Lincoln WayAmes, IA 50014515-268-0939

Hwy 30 WestGrand Junction, IA 50107515-738-2571

23296 Hwy 30 EastCarroll, IA 51401712-792-9294

E Highway 275Neligh, NE 68756402-917-5604www.ruetersjcb.com

Sellers JCB1645 S. West St.Wichita, KS 67213316-943-9311Fax: 316-943-8116

3030 S. W. 57th St.Topeka, KS 66609785-862-0031

400 N. Chicago St.Salina, KS 67401785-823-6378

395 N. Industrial Dr.Garden City, KS 67846620-275-9621www.sellersequipment.com

Fairchild JCB15735 Central Avenue NEHam Lake, MN 55304763-434-3832

3100 Highway 13 WestBurnsville, MN 55337952-697-1720

2140 Hutson RoadGreen Bay, WI 54303920-494-8726

2815 Mary StreetMarinette, WI 54143715-735-0402

5217 Heffron CourtStevens Point, WI 54481715-341-6846www.fairchildjcb.com

General Equipment & Supplies, Inc.4300 Main AvenueFargo, ND 58103701-282-2662Fax: 701-364-2190

905 20th Ave. SEMinot, ND 58701701-582-0479

3500 Apple Creek RoadBismarck, ND 58504701-223-9700

4082 2nd Ave. WestWilliston, ND 58801701-572-0570www.genequip.com

Like

on

A JCB 3DX backhoe willsoon be in service in Iringa,Tanzania, as part of theClinton Foundation’s agri-cultural development initia-tive for smallholder farmersin East Africa. The Clinton Foundation is

a non-profit organizationestablished by former U.S.President Bill Clinton toconvene businesses, govern-ments, NGOs and individu-als to improve global healthand wellness. The founda-tion’s agriculture initiativestrives to “grow food to feedthe world” through the edu-cation of soil utilization,yield and soil mapping, hybrid maizeseeds, herbicides, crop protection andimproved farming practices andprocesses. The foundation has partnered with

JCB and dealer Machines and TractorsTanzania to drive rural development inEast Africa, where inadequate farming

techniques and out-of-date equipmenthave caused insufficient output andfailure to meet market demand.Machines and Tractors Tanzania’s par-ent company, Muscat Overseas, hasbeen a JCB dealer for more than 40years and is the market leader for agri-cultural equipment in the area.

“We are very pleased thatJCB equipment will be usedfor this initiative in Tanzaniaand look forward to the pos-itive impact it will have onthe community,” said ThomPeebles, vice president ofmarketing of JCB NorthAmerica. “JCB has a long-standing philosophy of giv-ing back to communitiesaround the world and theClinton Foundation develop-ment initiative ties in wellwith our efforts.”For more information

about the ClintonFoundation, visithttps://www.clintonfounda-

tion.org/. To learn more about JCB and the

machines it manufactures, visithttp://www.jcbna.com/.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)

JCB Backhoe Loader to Help Clinton Foundation Initiative in East Africa

Former U.S. President Bill Clinton with the JCB 3DXbackhoe loader purchased for Iringa, Tanzania.

WISCONSIN from page 1

Highway 10/441Among Stalled Jobsthough she didn’t elaborate. The delayed projects are: • A $482 million plan to expand and reconstruct Highway

10/441 in the Fox Valley. The project was originally sched-uled to be completed in 2019, but now won’t be done until atleast 2020. • A $1.2 billion project to widen Interstate 39/90 between

Madison and the Illinois border from four lanes to six. Thatwork’s completion date will be pushed back from 2021 to atleast 2023. • A $251 million project to expand and reconstruct an

interchange on Madison’s Beltline. That effort will moveback from 2019 to at least 2021. • A $148 million effort to reconstruct 11 mi. (17.7 km) of

Highway 15 near New London. The work was supposed tobe done in 2019; the end date will now be pushed off until atleast 2021. • A $151 million project to finish long-running work on

Highway 23 between Fond du Lac and Sheboygan. Thatproject is already on hold after DOT agreed to reopen itsenvironmental review of the work in response to a lawsuit by1,000 Friends of Wisconsin. It was supposed to be done by2018, but now won’t wrap up until at least 2020.

(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)

Page 69: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 69

CONTACT YOUR JCB DEALER FOR MORE INFORMATION.

Tackle any challenge with the innovative PowerBoom on JCB Skid Steers. Step in and take control.

This revolutionary single-armed machine powers through every job while giving operators the best visibility available and safer side-door entry.

This year, JCB is celebrating 70 equipment business. To commemorate this milestone anniversary, we are offering industry leading finance offers including 0% for up to 70 months on select products from the JCB range.

Go to jcbna.com/0for70 to learn more.

*Offer valid until December 31, 2015 on select new JCB Skid Steers and Compact Track L ders at participating JCB dealers. Offer may change without prior notice, and additional terms and conditions may apply. Subject to JCB Finance approval. See a participating JCB dealer for full details.

t

hs on select products f

JCB of St. Louis7978 Veterans Pkwy.St. Peters, MO 63376636-281-4450

CSTK JCB400 Shawnee AvenueKansas City, KS 66105913-371-0868www.cstkjcb.com

Diesel Machinery Inc.4301 N Cliff Ave,Sioux Falls, SD 57104888-753-8907

39288 133rd St,Aberdeen, SD 57401888-484-6312

3801 N Deadwood AveRapid City, SD 57702800-658-3047www.dieselmachinery.com

MH JCB106 Circle Freeway Dr,Cincinnati, OH 45246513-681-2200

3306 Gilmore Industrial Blvd,Louisville, KY 40213502-962-6560

5859 Raymond St,Indianapolis, IN 46241317-240-6300www.mhjcb.com

YES JCB11715 W Silver Spring RoadMilwaukee, WI 53225262-783-7510

7001 Manufacturers DriveMadison, WI 53704608-243-9253www.buyjcb.com

JCB of Chicago1603 E Algonquin RdArlington Heights, IL 60005847-437-8686

16754 New AveLemont, IL 60439630-257-1261

1548 Huntwood DrCherry Valley, IL 61016815-332-8222www.jcbchicago.com

Page 70: Midwest 22 2015

Page 70 • October 24, 2015 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

Since 1985!

CALL JENNIFER TODAY!(888) [email protected]

www.RBusedParts.com

NEW, USED & REMAN PARTS• Undercarriage

• Arms & Booms

• Cylinders

• Valves

• Transmissions

• Pumps

• Engines

• and More!

» The #1 Selling Rubber Track Brand In America! »

Ashland, VA » Jacksonville, FL » Dallas, TX » Cincinnati, OH » Portland,OR » Sacramento, CA » Schenectady, NY » Leduc, AB

Order online anytime » depparts.com »800-365-7260

We Keep Equipment Moving!Call me today, I’ll be glad to help you!

~ Kevin

Bobcat®, Gehl®,Mustang®, Takeuchi®,CAT®279, 289 & 299

REPLACEMENT UNDERCARRIAGE

New Promotion…

Altorfer Inc. Names MartyHart as Rental Division VP

Altorfer Inc. announced that Marty Harthas been elected as vice president of therental division.

Hart joined Altorfer in 2007 as store man-ager of the Cedar Rapids rental location, andmost recently held the position of westernregion (Iowa) sales and operations managerwithin the rental division.

A veteran of the United States Navy, Hartstarted his career in the rental industry as asales representative of BPS EquipmentRental in Raleigh, N.C. Since then, he hasheld the positions of branch manager, districtsales manager and overall district operationsmanager of MSP Rents, Rental ServiceCorporation (RSC) and United Rentalsrespectively.

“Marty has a deep understanding of therent-to-rent industry, and has managed theutilization of equipment fleets similar in sizeto ours while also coaching a sales organiza-tion to maximize their performance,” saidDerek Altorfer, Altorfer executive vice pres-ident. “He has a ‘can do’ attitude and enjoys

bringing individuals together for the com-mon goal of serving customers.”

For more information, visit www.altor-fer.com or call 319/365-0551 ext. 2108.

(This story also can be found onConstruction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)

Altorfer Inc. announced that Marty Harthas been elected as vice president of therental division.

Page 71: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 71

LOGAN CONTRACTORS SUPPLY, INC.www.logancontractors.com

Des Moines4101 106th Street • Des Moines, Iowa 50322

515-253-9048 • Fax: 515-253-9491Quad Cities

4114 State Street • Bettendorf, Iowa 52772563-441-2949 • Fax: 563-441-2953

Kansas City1325 S. Enterprise Drive • Olathe, Kansas 66061

913-768-1551 • Fax: 913-768-1171Omaha

6544 L Street • Omaha, Nebraska 68117402-339-3900 • Fax: 402-597-0694

BURRIS EQUIPMENT2216 N. Greenbay Rd. • Waukegan, IL 60087

847-336-1205 • Fax: 847-336-2697www.burrisequipment.com

Ingleside, IL815-363-4100

Joliet, IL815-464-6650

FRANKLIN EQUIPMENT, LLCwww.franklinequipmentllc.com

Columbus Superstore4141 Hamilton Square Boulevard

Groveport, OH 43125614-228-2014 • 800-282-1438

Dublin7570 Fishel Drive South • Dublin, OH 43016

614-389-2161Newcomerstown

6206 US Hwy 36 SW • Newcomerstown, OH 43832740-492-0455

INDY EQUIPMENTwww.indyequipment.com

6500 Schaaf Rd. • Independence, OH 44131216-446-3200 • Fax: 216-573-7712

11159 Royalton Rd. • North Royalton, OH 44133440-237-9040

35350 Chester Rd. • Avon, OH 44011440-832-7133

MUELLER IMPLEMENT, INC.www.muellerrental.com

4948 County Road YZ • Dodgeville, WI 53533608-935-2751

BUCK & KNOBBYwww.buckandknobby.com

6220 West Sterns Road • Ottawa Lake, MI 49267Toll Free: 855-213-2825 • 734-856-2811

Page 72: Midwest 22 2015

Page 72 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NEW SKIDS

R 1 3 5Lift Height 109.6" (2784 mm)Rated Capacity 1,350 lbs. (612 kg)

R 1 5 0Lift Height 118.6" (3012 mm)Rated Capacity 1,500 lbs. (680 kg)

R 1 6 5Lift Height 119" (3023 mm)Rated Capacity 1,650 lbs. (748 kg)

R SERIESS K I D L O A D E R S

INTRODUCING!

Gehl Compact Equipment

28775 Beck Rd.Wixom, MI 48393248-449-6700

Fax: 248-449-6701www.altaequipment.com

2470 W. Columbia Ave.Battle Creek, MI 49015

269-965-1269Fax: 269-965-1881

8840 Byron Commerce SWByron Center, MI 49315

616-878-7450Fax: 616-878-7650

4716 Talon Ct. S.E.Kentwood, MI 49512616-698-2960

Fax: 616-698-2901

6327 Jomar Ct.Lansing, MI 48917517-272-5033

Fax: 517-272-7257

5920 Grand Haven Rd.Muskegon, MI 49441231-798-9754

Fax: 231-798-9387

28855 Smith Rd.Romulus, MI 48174734-641-8238

Fax: 734-641-8334

1524 Champagne Dr.Saginaw, MI 48604989-752-9400

Fax: 989-752-9834

7500 E. 15 Mile Rd.Sterling Hts., MI 48312

586-977-6000Fax: 586-977-6099

9433 Riley St.Zeeland, MI 49464616-748-4108

Fax: 616-748-4120

476 US 31 SouthTraverse City, MI 49685

231-943-3700Fax: 231-943-8110

56195 Pontiac TrailNew Hudson, MI 48165

248-356-5200Fax: 248-356-2029

Alta Equipment Company

Custom Truck & Equipment7701 Highway 24

Kansas City, MO 64125800-861-1065

www.cte-equipment.com

4805 Scooby Ln. NWCarroll, OH 43112866-262-4181740-654-5304

Fax: 740-687-9130

Cleveland Branch525 Golden Oak Pkwy.

Oakwood Village, OH 44146440-439-4567

Fax: 440-439-1789

Cincinnati Branch3120 S. Verity Pkwy.

Middletown, OH 45044513-649-8105

Fax: 513-649-8107

1554 Old Frankfort PikeLexington, KY 40504

866-262-4181Fax: 859-254-1107

Company WrenchElder Ag and TurfEast Palestine, OH330-426-2166

Page 73: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 73

Some companies have you choose power or fuel efficiency. You chose both.

L

C

C

C

C

1

T

oOnly V Volv

s on a true fuel efficiency guarero delivolv

antee so you nes on a true fuel efficiency guar

omisee to comprver ha avvantee so you ne

A

ormancfon peryour attention on moror get the details at

. And with Caroductivitye or prormanctant things — like imporyour attention on mor

or get the details at om/smare.cocolvv

ack machine monitoring, you can freTTr. And with Carowing your business. Te grtant things — lik

tfuelom/smar .

ocusack machine monitoring, you can f,alk to us today usiness. T Talk to us today

Battle Creek, MI269.965.1269Byron Center, MI616.878.7450Kentwood, MI616.698.2960Lansing, MI517.272.5033Muskegon, MI231.798.8754New Hudson, MI248.356.5200Romulus, MI734.641.8238Saginaw, MI989.752.9400Sterling Hts, MI586.977.6000Traverse, MI231.943.3700Wixom, MI248.449.6700Wixom, MI(Cons. Division)248.356.5200Zeeland, MI616.748.4108

Alsip, IL708.389.7700East Peoria, IL309.694.4455Rockford, IL815.227.0555Springfield, IL217.789.0351Villa Park, IL630.530.7600

Burnsville, MN

800.552.1189

Proctor, MN

800.835.MACK

Eau Claire, WI

800.494.MACK

Mankato, MN

800.862.MACK

Rochester, MN

800.562.1505

Roseville, MN

800.704.0935

Sauk Rapids, MN

888.310.MACK

Evansville, IN812.867.6661Fort Wayne, IN260.482.3681Indianapolis, IN317.247.9125Corbin, KY606.528.9440Louisville, KY502.456.4050Prestonsburg, KY606.874.2104St. Louis, MO314.487.8925

Butler, WI262.781.3770DeForest, WI608.846.9600DePere, WI920.336.3601Eau Claire, WI715.835.6133

McCALLISTER

EQUIPMENT CO.

Contact your local dealer:

Page 74: Midwest 22 2015

Page 74 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

China’s construction machinerymarket has been in decline for sev-eral consecutive years, but that isset to change. LiuGong, a globalleader in manufacturing a full lineof extreme duty equipment, hasrepositioned its forces, refined itsstrategy and is ready for the chal-lenges and opportunities that lieahead within new and existing mar-kets, according to the company.At this year’s annual meeting for

innovative enterprises organizedby the China Machinery IndustryFederation, LiuGong received theevent’s top prize, the InnovationPioneer of EquipmentManufacturing Industry Award.As the company who produced

China’s first modernized wheelloader in 1966, LiuGong has madea fresh start to its technical innova-tion. The company now has 15product lines, including theupgraded H-series wheel loader, E-series excavator and E-series roller.This June, LiuGong opened its

Global Research and DevelopmentCentre in Liuzhou, China. This ini-tiative will boost LiuGong’sresearch and development (R&D)to a level comparable with leadingglobal construction equipmentmanufacturers. With the world-class hardware in this new R&Dcenter, a modern testing platform,modern manufacturing plant, aswell as more than 1,000 engineersacross the world, LiuGong hasentered a new era of R&D to fur-ther develop its machines, accord-ing to the company.The company’s commitment to

technical innovation and invest-ment in research and developmenthas paid off. On June 15, 2015,LiuGong called a large and high-end product launch in Changzhou,the core base for LiuGong’s strate-gy in the East. Here, LiuGong suc-cessfully displayed the 8t and 12tH-Series wheel loaders; the 48t,50t and 70t E-Series excavators;the TC550A and TC250A5 cranes;

and the TD40E bulldozer. At thesame time, 60 LiuGong excavatorswere distributed to clients withinthe Americas.

Global PlayerHaving begun its international-

ization strategy in 2003, LiuGonghas become an example to otherenterprises in the Chinese CEindustry, demonstrating its successin both overseas sales volumes andratio of export products comparedto its competitors.After growing from a local fac-

tory in a small city in China’ssouthwest region to the 22ndlargest construction equipmentmanufacturer in the world, ZengGuang’an, chairman of LiuGong,attributes LiuGong’s continuedsuccess to the company’s globalvision, confidence and commit-ment. He predicts that internation-al business will account for 40 per-cent of LiuGong’s revenue in2020. He has good reason to feel

confident in this prediction.The company has established

subsidiary offices and undertakenmergers and acquisitions in keyregional markets. It has built a rap-idly growing network of more than374 dealers across seven conti-nents in more than 136 countries.Supporting the dealer network are10 regional offices with engineer-ing, marketing and service support,coupled with eight overseas partsdepots located strategicallythroughout the world, ensuringrapid replacement of parts andservicing of equipment. LiuGongdoes not enter a market withoutdealers and support systems inplace. LiuGong’s most recentmajor global action was to estab-lish a manufacturing plant in Brazilin March 2015, in an effort to pen-etrate the burgeoning SouthAmerican market.LiuGong highly values its rela-

tionships with world-class part-ners. It has cooperated with

Cummins and ZF on many of itscore technologies and major com-ponents, which it has used acrossLiuGong’s product lines, includingthe new E-Series excavators andH-Series wheel loaders.The company’s global strategy

has attracted talent from all overthe world. David Beatenboughjoined LiuGong in 2006 and is incharge of R&D. FollowingBeatenbough, other global expertsin the field also have joinedLiuGong, from industrial design toproduct development profession-als. Howard Dale was appointed asvice president of LiuGong DresstaMachinery Co. Ltd. in Poland, andchairman of LiuGong MachineryEurope B.V., after working withCase Corporation for several years.For more information, visit

www.liugong.com.(This story also can be found on

Construction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

Company Hopes to Boost Market...

LiuGong Refines Strategy, Poised to Begin New Chapter

ITA Tunnelling Announces Short-List of 2015 NomineesThirty-two: That is the final number of

nominees that will be running for the ITAAwards 2015, Nov. 19 in Hagerbach,Switzerland. The best projects and engi-neering profiles will be presented to the juryof 18 experts during a one-day conference.They will compete in the framework of 9prize categories, from the major project ofthe year to the innovation of the year. Thenominees’ selection process was tight,regarding the considerable number ofentries (110 applicants, 105 projects finallyrecorded by the ITA). Three to eight nomi-nees have been selected in each of the nineITA Awards’ categories.

Major Project of the Year (MoreThan 500 Million Euros)

• Eurasia Tunnel Project — Turkey • Futian Station of Guangzhou —

Shenzhen — Hong King — China • New York City’s Second Avenue

Subway Project — USA

Tunnelling Project of the Year(From 50 to 500 Million Euros) • 1st Phase of Low and Intermediate

Level Radioactive Waste Disposal Facility

Construction — South Korea• Indianapolis Deep Rock Conveyance

and Storage Tunnel Project — USA• Lake Mead intake N°3 — USA

Outstanding Project of the Year(Up to 50 Million Euros)

• Grosvenor Decline Tunnels — Australia• Norsbork Metro Depot — Sweden • North Strathfield Rail Underpass —

Australia

Technical Innovation of the Year • An Innovative Vehicle-mounted GPR

Technique for Fast and Efficient Monitoringof Tunnel Lining Structure Conditions • Combination of techniques for

immersed tunnel • Development of the New Joint (SB

Joint) for Shield Tunnels • Monitoring tunnelling induced ground

displacements using distributed fiber opticsensing• New innovative system for layer thick-

ness control on spray mobiles• The evolution of the “Nazzano” method

to widen tunnel without interrupting trafficflow

Environmental Initiative of the Year

• Brenner Base Tunnel/IsarcoUndercrossing Lot — Italy • Innovative Overhead Conveyor Belt for

Urban Environmental Benefit — Qatar• The Corribtunnel Project — tunnelling

in environmentally sensitive area — Ireland

Safety Initiative of the Year • MineARC Systems Compressed Air

Management Solution• Safety cabin of tunnelling drill• Semi-Automatic Tubular Steel Arch : an

innovation on safety

Innovative Use of Underground Space

• Reviving burial in tunnel — Israel • Sydney Opera House Vehicle Access

and Pedestrian Safety (VAPS) project —Australia• Toledo Metro Station on Line 1 in

Naples — Italy

Young Tunneller of the Year • Philip Duarte • Petros Fortsakis• Jurij Karlovsek

• Liu Hao • Sindre Log • Ryan McCarron• Angelo Palma Filho Eloi• Ponciano Perez Lupi “The jury had to select the most innova-

tive candidates in each categories.Regarding the success of the ITA TunnellingAwards and the quality of the entries, it wasquite a difficult task to achieve, yet verystimulating and challenging. The field oftunnels and underground spaces is in con-stant evolution; technical innovations arenumerous. The ITA Tunnelling Awards areto detect such ‘treasures’, in a context of cli-mate and demographic emergency. Withmore than 66 percent of the global popula-tion living in cities in 2050, and regularfloods caused by the global warming, thetunnels’ engineering has got a strategic roleto play in the construction of sustainableurban areas,” ITA’s president Soren DegnEskesen said. For more information, visit

https://awards.ita-aites.org.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Page 75: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 75

��

CX250DCX210D CX300D CX350D

Meet the remarkably faster AND more fuel-effi cient D Series.Get more buckets per hour, more hours per tank, more done sooner than you ever

dreamed possible. It’s a revolution in the way material is moved. CaseCE.com/DSeries

THE RULES HAVECHANGED.

*Load data and fuel usage are per year and based on CX300D in SP Mode. Fuel usage data is based on average diesel price per gallon of $2.75 as of 4/13/15 per US EIA. Load capability and fuel usage depend on mode of operation for all units. ©2015 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries,

owned by or licensed to CNH Industrial N.V., its subsidiaries or affi liates.

9,500 MORE LOADS. $1,400 LESS FUEL*.ONE MACHINE.

CASE AUTHORIZED DEALERS

ILLINOISBirkey’sBloomington (309) 827-0520Galesburg (309) 341-4360Mattoon (217) 235-3158Urbana (217) 337-1781

Diamond EquipmentMt. Vernon (618) 242-2273

Luby Equipment ServicesCaseyville (618) 397-9971Quincy (217) 222-5454Springfi eld (217) 744-2233

McCann IndustriesAddison (630) 627-0000Bolingbrook (630) 739-7770McHenry (815) 385-0420Wauconda (847) 526-9444

Miller-Bradford & RisbergRockford (815) 397-6200

INDIANADiamond EquipmentEvansville (812) 425-4428Terre Haute (812) 299-4747

McCann IndustriesSchererville (219) 865-6545

RPM MachineryFort Wayne (260) 747-1561Indianapolis (317) 856-3000Lafayette (765) 742-2080South Bend (574) 271-0800

IOWATitan MachineryCenter Point (319) 849-3889Davenport (563) 386-0400Des Moines (515) 974-5100Sioux City (712) 239-4941

KANSASVictor L. PhillipsGarden City (620) 275-1996Topeka (785) 267-4345Wichita (316) 838-3346

KENTUCKYDiamond EquipmentBowling Green (270) 781-1061

McKeel Equipment Company Murray (270) 753-3062Paducah (270) 444-0110

Southeastern EquipmentBurlington (859) 586-6133

State EquipmentAshland (606) 928-5644

Wilson Equipment CompanyCorbin (606) 528-0700Elizabethtown (270) 360-8326Lexington (859) 254-6443Louisville (502) 589-9901Prestonsburg (606) 874-8036

MINNESOTATitan MachineryCrookston (218) 281-4668Hermantown (218) 727-3038Marshall (507) 532-5783Rogers (763) 428-5099Shakopee (952) 445-5400

MICHIGANMiller-Bradford & RisbergNegaunee (906) 475-4181

RPM MachineryDorr (616) 371-7250

Southeastern EquipmentHolt (517) 694-0471Novi (248) 349-9922

MISSOURICrown Power & EquipmentColumbia (573) 443-4541Eldon (573) 392-0230Jefferson City (573) 636-5281

Luby Equipment ServicesCape Girardeau (573) 334-9937Fenton (636) 343-9970O’Fallon (636) 332-9970

Potter EquipmentSpringfi eld (417) 862-9275

Victor L. PhillipsJoplin (417) 781-8222Kansas City (816) 241-9290

NEBRASKATitan MachineryLincoln (402) 464-3711North Platte (308) 532-6571Omaha (402) 733-3700

NORTH DAKOTATitan MachineryBismarck (701) 250-7925Dickinson (701) 227-5309Fargo (701) 237-3333Grand Forks (701) 775-8111Minot (701) 852-3188Williston (701) 577-0024

OHIOSoutheastern EquipmentBrilliant (740) 598-3400Brunswick (330) 225-6511Cambridge (740) 432-6303Dublin (614) 889-1073Gallipolis (740) 446-3910Heath (740) 522-3500Mansfi eld (419) 529-4848Marietta (740) 374-7479Mentor (440) 255-6300Monroe (513) 539-9214North Canton (330) 494-3950Perrysburg (419) 874-0331

SOUTH DAKOTATitan MachineryAberdeen (605) 225-0505Pierre (605) 224-9247Rapid City (605) 388-0266Sioux Falls (605) 336-3434

WISCONSINMiller-Bradford & RisbergAbbotsford (715) 223-2381De Pere (920) 338-5800Eau Claire (715) 832-3443Madison (608) 222-9191Sussex (262) 246-5700

Titan MachineryLa Crosse (608) 788-1025

Page 76: Midwest 22 2015

Page 76 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

FIND OUT WHAT OTHERS KNOW. VISIT TAKEUCHI-US.COM TO FIND THE DEALER NEAREST YOU.

EXPERIENCE THE DIFFERENCETakeuchi o�ers the most innovative and advanced line of compact equipment on the planet. Come and see what everyone else is talking about. Experience Takeuchi — Visit your local dealer today.

ERIEPEX

I DEH TECNE

ECNREFFE

ERIEPEXhs tre�i ohcuekaT

e amo. Ctenale phte dlaoc lrou ysitiV

I DEH TECNEdd ane avitavonnt isoe me isle enoyrevt eahe wed sn

.yado tlerae

ECNREFFEt ecapmof ce ond liecnavd

. tuobg aniklas te i eirpexE

nt onempiuqt e —hiuceka T Taenc

F

S KREHTT OAHT WUD ONIF

T ISI. VWONS K HUCEKAT

OMC.SU-I E DHD TNIO F T

.UOT YSERAER NELAEE D

McCann Industries543 S. Rohlwing Rd • Addison, IL 60101

630-627-0000250 E. North Frontage Rd. • Bolingbrook, IL 60440

630-739-77702350 S. Laflin St. • Chicago, IL 60608

312-942-92004701 West 137th Street • Crestwood, IL 60445

708-597-31101133 Indianapolis Blvd. • Schererville, IN 46375

219-865-65451360 N. Rand Rd. • Wauconda, IL 60084

847-526-94444102 W. Crystal Lake Rd. • McHenry, IL 60050

815-385-0420www.McCannOnline.com

Brandeis Machinery & SupplyCompany

17000 Highway 41 NEvansville, IN 47725

812-425-44917310 Venture Lane

Fort Wayne, IN 46818260-489-4551

8410 Zionsville RoadIndianapolis, IN 46268-1524

317-872-84101801 Watterson TrailLouisville, KY 40299

502-491-4000www.brandeismachinery.com

Diamond Equipment Inc.1060 Diamond Avenue • Evansville, IN 47711

800-258-4428 • 812-425-4428 • Fax: 812-421-10361046 Lovers Lane • Bowling Green, KY 42103

800-489-1061 • 270-781-1061 • Fax: 270-781-090717035 North IL Hwy 37 • Mt. Vernon, IL 62864

800-388-6396 • 618-242-2273 • Fax: 618-242-91612000 Harlan Drive • Terre Haute, IN 47802

888-343-4747 • 812-299-4747 • Fax: 812-299-3687www.diamondequipment.com

Bobcat of St. Louis401 West Outer Rd.

Valley Park, MO 63088636-225-2900

Fax: 636-225-43441885 West Terra Lane • O’Fallon, MO

636-240-90201101 N. Lenway Dr. • Columbia, MO

573-886-94359801 West State Route 161

Fairview Heights, IL618-397-1847

www.bobcatofstl.com

Victor L. Phillips Co.4100 Gardner Ave. • Kansas City, MO 64120

800-878-92905430 S. Highway 43 • Joplin, MO 64804

800-878-82236330 W. Hwy 60 • Brookline Station, MO 65619

800-955-27293250 North Hydraulic • Wichita, KS 67219

800-878-33461305 SW 42 St. • Topeka, KS 66609

800-878-43452203 West Jones Ave. • Garden City, KS 67846

800-511-1435www.vlpco.com

Alta Equipment Company28775 Beck Rd. • Wixom, MI 48393

248-449-67002470 W. Columbia Ave. • Battle Creek, MI 49015

269-965-12698840 Byron Commerce SW • Byron Center, MI 49315

616-878-74504716 Talon Ct. S.E. • Kentwood, MI 49512

616-698-29606327 Jomar Ct. • Lansing, MI 48917

517-272-50335920 Grand Haven Rd. • Muskegon, MI 49441

231-798-875456195 Pontiac Trail • New Hudson, MI 48165

248-356-520028855 Smith Rd. • Romulus, MI 48174

734-641-82381524 Champagne Dr. • Saginaw, MI 48604

989-752-94007500 E. 15 Mile Rd. • Sterling Hts., MI 48312

586-977-6000476 US 31 South • Traverse, MI 49685

231-943-37009433 Riley St. • Zeeland, MI 49464

616-748-4108www.altaequipment.com

Road Builders Machinery andSupply Co., Inc.

4115 S. 90th St. • Omaha, NE 68127402-331-9200

Fax: 402-339-66205601 Fletcher Ave. • Lincoln, NE 68507

402-325-0447Fax: 402-325-0753

4949 Juergen Rd. • Grand Island, NE 68801308-384-2620

Fax: 308-384-0686www.roadbuildersmachinery.com

Columbus Equipment Company50 East Kingston Ave. • Columbus, OH 43207

614-443-654112500 Williams Rd. • Perrysburg, OH 43551

419-872-7101712 Shepherd Ave. • Cincinnati, OH 45215

513-771-39223942 Brecksville Rd. • Richfield, OH 44286

330-659-6681290 Old Steubenville Pike • Cadiz, OH 43907

740-942-88717570 New Carlisle Pike • Dayton, OH 45424

937-879-31542200 Venture Circle SE • Massillon, OH 44646

330-833-2420818 Lee St. • Zanesville, OH 43701

740-455-4036864 Richmond Rd. • Painesville, OH 44077

440-352-04523668 US Route 23 South • Piketon, OH 45661

740-289-3757www.columbusequipment.com

Midwest Underground Supply1106 32nd St. SWBondurant, IA 50035

877-967-565627285 Ironworks Ave.Harrisburg, SD 57032

605-368-9880www.midwestundergroundsupply.com

Page 77: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 77

FIND OUT WHAT OTHERS KNOW. VISIT TAKEUCHI-US.COM TO FIND THE DEALER NEAREST YOU.

EXPERIENCE THE DIFFERENCETakeuchi o�ers the most innovative and advanced line of compact equipment on the planet. Come and see what everyone else is talking about. Experience Takeuchi — Visit your local dealer today.

ERIEPEX

I DEH TECNE

ECNREFFE

ERIEPEXhs tre�i ohcuekaT

e amo. Ctenale phte dlaoc lrou ysitiV

I DEH TECNEdd ane avitavonnt isoe me isle enoyrevt eahe wed sn

.yado tlerae

ECNREFFEt ecapmof ce ond liecnavd

. tuobg aniklas te i eirpexE

nt onempiuqt e —hiuceka T Taenc

F

S KREHTT OAHT WUD ONIF

T ISI. VWONS K HUCEKAT

OMC.SU-I E DHD TNIO F T

.UOT YSERAER NELAEE D

Star Equipment Ltd.1401 2nd Avenue • Des Moines, IA 50314

515-283-2215 • 800-369-2215Fax 515-283-0295

2625 W. Airline Hwy. • Waterloo, IA 50703319-236-6830 • 800-791-9249

Fax 319-236-68342950 6th Street SW • Cedar Rapids, IA 52404

319-365-5139 • 800-728-5139Fax 319-365-6726

2100 E. Lincoln Way • Ames, IA 50010515-233-9500 • 866-856-2312

Fax: 515-233-9505www.starequip.com

Luby Equipment Services2300 Cassens Drive • Fenton, MO 63026

636-343-9970199 Airport Road • Cape Girardeau, MO 63702

573-334-99378853 Petroff Drive • Caseyville, IL 62232

618-397-99714375 Camp Butler RoadSpringfield, IL 62707

217-744-22332625 North 24th St. • Quincy, IL 62305

217-222-5454www.lubyequipment.com

Wilson Equipment Company2180 Old Frankfort Pike • Lexington, KY 40510

859-254-6443800-432-0913

Fax: 859-254-9099

828 W. Cumberland Gap Pkwy • Corbin, KY 40701606-528-0700800-274-9457

Fax: 606-528-2329

2124 Watergap Road • Prestonsburg, KY 41653606-874-8036 • 800-955-9457

Fax: 606-874-0013

www.wilsonequipment.com

Page 78: Midwest 22 2015

Page 78 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

‘ICUEE Gives Back’ Auction Aims toHelp Veterans Prepare for Job Market

The “ICUEE Gives Back” benefit auc-tion held on Oct. 1, 2015, was aimed athelping returning Veterans find employ-ment in the private sector (particularly theconstruction and utility industries) throughThe Call of Duty Endowment and raised$29,575 toward that effort. The Call ofDuty Endowment helps Veterans find highquality careers by supporting groups thatprepare Veterans for the job market and byraising awareness of the value Vets bring tothe marketplace.ICUEE exhibitors donated a wide range

of items to be sold at auction, both live onsite at ICUEE in Louisville, Ky., as well aslive online, through internet bidding, pro-vided by Proxibid. Doosan Portable Power donated a C185

air compressor, which sold at the highestvalue of any item, bringing in $7,500 toward the cause.Other auction items included a Dale Earnhardt NASCARracing helmet (donated by Morgan Corp.), a 7-day RoyalCaribbean Cruise (donated by Altec Inc.), a Las Vegas coun-try music experience (donated by Ditch Witch), and 15 oth-ers.The Call of Duty Endowment supports groups that assist

Vets develop resumes, work on interviewing skills, andmuch more. The average cost of helping a Vet enter the jobmarket is $700. With that in mind, the ICUEE Gives Backauction raised funds that will help more than 42 Veterans findjobs. ICUEE and its auction partners Benjamin Media & J.J.

Kane Auctioneers are proud to support Vets, through assis-tance in promoting and conducting the ICUEE Gives Backauction event.For more information, visit http://www.callofdutyendow-

ment.org/home.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)Included in the auction items was a Dale EarnhardtNASCAR racing helmet, donated by Morgan Corp.

The “ICUEE Gives Back” benefit auction was aimed at helping return-ing Veterans find employment in the private sector.

The auction raised $29,575.

Construction spending in August reached a seven-yearhigh and climbed at the fastest rate since 2006, according toan analysis by the Associated General Contractors ofAmerica. Association officials noted that growing demandfor construction was likely to add to the challenges manyfirms are having finding qualified workers.“There were widespread monthly and year-over-year

gains in August for all major construction categories — pri-vate nonresidential, residential and public,” said KenSimonson, the association’s chief economist. “Activity in allthree categories has been accelerating recently and shouldcontinue rising into 2016 — if contractors can find enoughworkers with the right skills to complete the projects underway and currently being designed or financed.”Construction spending in August totaled $1.086 trillion at

a seasonally adjusted annual rate, 0.7 percent higher than theJuly total and 13.7 percent higher than in August 2014,Simonson said. He noted that the total was the highest sinceMay 2008 and the year-over-year growth rate was thestrongest since March 2006, indicating a faster pace of con-struction spending overall.Private nonresidential spending in August increased 0.2

percent from July and 16.9 percent from a year earlier, whileprivate residential spending increased 1.3 percent for themonth and 16.1 percent over 12 months. Public constructionspending rose 0.5 percent from a month before and 7.0 per-cent from 12 months earlier.“There has been exceptionally strong growth in manufac-

turing, lodging and apartment construction all year,”Simonson said. “More recently, office, health care, highwayand educational structures have rebounded as well.”Association officials note that, according to a survey the

group released in September, 86 percent of firms reportedthey are having a hard time finding qualified workers to fillavailable positions. Those shortages are likely to becomemore severe as demand for construction services continues togrow, they added. That is why the association continues topush for measures outlined in its updated WorkforceDevelopment Plan designed to make it easier to prepare,recruit and train new workers.“While it is great to see growing demand for construction,

many firms won’t benefit if they don’t have enough workersto get the job done,” said Stephen E. Sandherr, the associa-tion’s chief executive officer. “Without a better approach toattracting and preparing future construction workers, con-struction projects are likely to get more expensive and takelonger to complete.”For more information, visit www.agc.org.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

Best Since 2006...

August ConstructionSpending ReachesSeven-Year High

Page 79: Midwest 22 2015

By Dale Starry and Fares BeainySPECIAL TO CEG

This article is the last of a five-part series on paving provided byVolvo Construction Equipment.The lifespan of an asphalt road

and its need for future repairs islargely dependent upon the finaldensity of the finished pavement— so much so that density is oneof the primary measures of jobquality for DOTs. But even themost skilled compactor operatorshave to do a great deal of guess-work throughout the process, andthey must rely on time-consumingnuclear gauge testing and destruc-tive core sampling after the asphalthas cooled down to ambient tem-perature in order to get in-placedensity measurements. The resultsof these tests sometimes requirethe contractor to go back and cor-rect areas of imperfection, whichcan drive up costs and reduce thelikelihood of receiving a bonus.But this is all changing.Technology advancements over

the last decade — deemedIntelligent Compaction (IC) —offer opportunities to dramaticallyreduce the guesswork in the pavingprocess. The Federal HighwayAdministration (FHWA) has beenworking hand-in-hand with a slewof states and manufacturers todevelop and test IC systems thatcan help provide real-time infor-mation to the operator that is criti-cal to achieving target density.These factors include number ofpasses, mat temperature and intelli-gent compaction measurementvalue (ICMV) — each allowingoperators to make informed deci-sions on the fly. However, up untilnow, no system has been able todeliver real-time, in-place densitycalculations. In fall 2015, Volvo Construction

Equipment is releasing Volvo

Intelligent Compaction withDensity Direct — the industry’sfirst real-time density mappingtechnology. The quest for this tech-nology has been a long one, large-ly fueled by the industry’s need forbetter construction practices toextend road life in the face of fund-ing uncertainties.

A Half-Century of Advances

IC technology was firstintroduced in Europe in thelate 1960s and was usedstrictly for soil compactionapplications. In the mid-2000s, the FHWA champi-oned an effort to apply simi-lar technology to asphaltcompaction, and by 2006,the initiative had receivedfunding under theTransportation Pooled Fund(TPF) Program. The TPFinvolved states that agreed totest and explore the benefitsof IC systems for major high-way projects — a programthat lasted until 2011. Duringthis time, multiple suppliers(including OEMs and after-market technologyproviders) entered the ICmarket. Dramatic improve-ments were made to hard-ware in the forty years sinceits development, yet the principlesof intelligent compaction remainedlargely unchanged.

How IC WorksIC systems feature an

accelerometer-based measurementsystem, as well as GPS, infraredtemperature sensors, and an on-board computer that provides real-time compaction information tothe operator. The primary featuresof IC systems — common amongall providers — are pass mapping,surface temperature mapping, and

data collection.• Pass Mapping — IC systems

provide real-time information tothe operator, showing how manypasses have been completed andensuring the operator can gain bet-ter uniformity across 100 percentof the mat. Over-compaction isequally as detrimental to quality asunder-compaction, and pass map-ping can help ensure the operatorisn’t making too many or two fewpasses. In general, there should bea prescribed number of passes for ajob (rolling pattern), but that num-ber of passes only achieves target

density if compacting at the correctasphalt temperature and at the cor-rect amplitude settings.• Temperature Mapping — IC

systems display real-time pave-ment surface temperature informa-tion to the operator. This is incred-ibly important, as the temperaturegreatly impacts the material’s abil-ity to be compacted. Armed withreal-time temperature information,a skilled compactor operator willknow to make adjustments to thedistance behind the paver in orderto compact the asphalt at peak tem-peratures and avoid the need foradditional passes that can drive upproject costs and extend timelines.• Data collection — The FHWA

recognized that IC data could pro-vide significant value for qualitycontrol protocols. Of critical impor-tance, however, was ensuring thatdata was collected and reported in astandard format among all manu-facturers’ IC systems. Thus, theFHWA recommended that all sys-tems export data in a standard for-mat for use in a program calledVeta — a map-based software orig-inally funded by both FHWA andMinnesota DOT. While these three features are

more or less standard across all ICsystems, what varies significantlybetween systems is how theasphalt ICMV is calculated. Themajority of IC systems offer real-time asphalt ICMV calculations;however, each manufacturer has aslightly different methodology forhow it’s done.Despite the variance in calcula-

tions between manufacturers, eachhas the same goal in mind — toequate ICMV to density. This cor-relation (or lack thereof) betweenICMV calculations and real-worldasphalt density values has beensubject to a great deal of scrutiny inthe past several years.

Comparing ICMV and Density

In 2014, FHWA released areport about a study that attemptedto identify a clear correlationbetween ICMV calculations andin-place asphalt densities. Thestudy involved IC testing and eval-uation on asphalt paving projectsthroughout Utah, Florida, Ohio,Maine, California, Idaho,Maryland, Kentucky andWashington. The FHWA evaluated

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

SECT IONPavingPages 79-93

The Past, Present, Future of Intelligent Compaction

Currently, 20 states have adopted IC standards and are mandat-ing that road contractors use IC systems on certain projects.

The user interface of Volvo IC withDensity Direct depicts a densitymap, showing each square unit ofrolled surface in a color represent-ing density, and also provides real-time numerical readings of density,surface temperature, and passcount displayed on one side of thescreen.

see COMPACTION page 84

Page 80: Midwest 22 2015

Page 80 • October 24, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Atlas Copco Unveils Dynapac CT3000 Tamping CompactorThe Atlas Copco Dynapac CT3000 tamp-

ing compactor efficiently achieves specifieddensities on cohesive and semi-cohesivesoils while delivering optimal operator com-fort and minimizing wear. The CT3000’spadfoot drums are mounted on rubber tiresto effectively absorb impacts, which mini-mizes wear on the drum and vibrations to theoperator platform. The roller also offerssome of the highest production rates in itsroller class — as much as 900 cu. yds. (688cu m) per hour, so it’s ideal for large-volumeearthwork projects, such as highways, damsand airport runways, according to the manu-facturer.

The Dynapac CT3000 is powered by aCummins QSB 6.7 Tier IV Final engine,which offers low fuel consumption and lessenvironmental impact. The 4-speed auto-matic transmission provides optimum all-wheel traction for high productivity.

The front oscillating axle works inde-pendently of the optional strike-off blade andthe rigid rear axle. This enables the blade towork in a permanently level position andensures uniform distribution of soil on anytype of terrain. The square pads of the com-pacting drums produce the optimal amountof force to ensure uniform compaction den-sity.

The CT3000 drums are unaligned, whichallows the rear drum to compact areas thathave not been compacted by the front drum.This enables the Dynapac CT3000 to covera larger area in fewer passes — saving time,fuel and, as a result, money on the job, aswell as minimizing the environmentalimpact of the machine. The compactor alsofeatures hydrostatic steering that allows con-tractors to turn at angles as sharp as 40degrees in either direction. The compactoralso has a turning radius of less than 21 ft.(6.4 m) for maximum maneuverability andcan travel as fast as 12 mph for fast and effi-cient compaction.

The Dynapac CT3000 has a spacious plat-form with operator-friendly controls and aswivel seat for optimal visibility. The opera-tor station rotates 180 degrees and has a vari-able suspension for a comfortable ride. Thecontrol console gives theoperator easy access to allfunctions and a clear view ofthe LED panel displayingmachine information.Additional operator safe-ty features include alow center of gravity toensure optimum stability of themachine and two brake systems — a

service brake with an independent doublecircuit that acts on all four drums, and a park-ing brake that acts on the transmission.

Contractors and technicians can quicklyand easily access the engine for fast main-tenance and less downtime. The com-pactor also is equipped with a high-per-formance cooling system thatfeatures an integrated self-cleaning reversible fan.

(This story also can befound on ConstructionEquipment Guide’s Web siteat www.constructionequip-mentguide.com.)

The Dynapac CT3000 from AtlasCopco compacts 900 cu. yds. (688cu m) per hour, which is one of the

highest production levels in itsclass of tamping

compactors.

Wacker Neuson Offers Full Line of Walk-Behind TrowelsFrom the occasional finisher to

the large concrete professional,Wacker Neuson has the walk-behind trowel to meet your needs.With 11 models including edging,standard, high-horsepower andvariable speed units to choose from,concrete finishers will find the rightsize and power to fit any job.

As safety continues to be a para-mount concern for job sites,Wacker Neuson’s walk-behindtrowels were built with safety inmind. Wacker Neuson’s CT walk-behind line (except edging model)offers a design built to provideextra protection from an out ofcontrol spinning handle. When theoperator lets go of the handle, agyroscopic safety sensor detectsthe motion of the handle and stopsthe engine before the handle reach-es a 45-degree rotation. Thisengages the gearbox brake, whichwill stop the handle rotation withina 270-degree rotation. This systemprotects the operator from beingstruck by a runaway handle,according to the manufacturer.

Also designed for easy opera-tion, the dynamically balancedtrowels (when the blades are turn-

ing) offer nearly effortless opera-tion and maximum control at allspeeds with types of blades includ-ing pans. A variety of handleoptions and pitch controls are

available and can be mixed andmatched to the operator’s needsand preference.

Standard CT 36 models are 36-in. (91 cm)

diameter models and offer thechoice of a Honda or WackerNeuson engine. The CT 48 modelsare 48-in. (122 cm) diameter mod-els also with the choice of Honda

or Wacker Neuson engines.

High Horsepower CT 36 and CT 48 models offer a

higher horsepower option that pro-vides better torque for low speedfloating and additional weight forthose operators who prefer a heav-ier trowel, especially in hot, dry orwindy conditions.

Variable Speed CT 36 and CT 48 models offer a

variable transmission system thatprovides wide speed range (25 to200 rpm) for low speed, hightorque finishing through high speedburnishing all in one machine.

Edging The CT 24-4A is specifically

designed for up to the edge finish-ing. This unit offers better floatingand finishing capabilities along alllines and obstacles, improving pro-ductivity and quality.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

With 11 models including edging, standard, high-horsepower and variable speed units to choosefrom, concrete finishers will find the right size and power to fit any job.

Page 81: Midwest 22 2015

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2015 • Page 81

Page 82: Midwest 22 2015

Page 82 • October 24, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

ROLAND MACHINERYSpringfield, IL217/789-7711Carterville, IL618/985-3399Portage, IN

219/764-8080Bridgeton, MO314/291-1330

Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056Eau Claire, WI715/874-5400DePere, WI

920/532-0165Deforest, WI608/842-4151

Franksville, WI262/835-2710Schofield, WI715/355-9898

2600 S. Lincoln Rd.Escanaba, MI906/786-6920

Fax: 906/786-5813

Golfers Participate in GOMACO Event

Forty-mile-per-hour wind gusts didn’t prevent golfersfrom turning in some exceptional scores at GOMACOInvitational #34 held Sept. 15 and 16, in Ida Grove,

Iowa. The GOMACO Invitational is the company’s annualgolf event held at the Ida Grove Golf and Country Club andthree surrounding courses. Nearly 300 contractors, distribu-tors, suppliers, association members and media personnelfrom across the United States, Canada and Australia attend-ed this year’s Invitational. GOMACO also continued itsyearlong “The First 50 Years” celebration. The event’s fea-tured colors were white and yellow, for the company’s gold-en anniversary.

The Putting Tournament started off the GOMACOInvitational golf events Sept. 15, at the Ida Grove CountryClub. Putters participated in the tournament on four differentgreens on the course, with the top team from each greenadvancing to the Putting Championship.

Immediately following the Putting Tournament, theContractors’ Shoot-Out started. The names of 18 contractorswere drawn and divided into three-person teams. The sixteams competed in a five-hole competition, with the highestscoring team eliminated on each hole.

On Sept. 16, a total of 280 golfers participated in the 34thScramble Tournament and 18 holes of golf on the courses inIda Grove, Holstein, Mapleton and Odebolt. Thirty-five ofthe 36 tee boxes were filled with two four-man teams.Champion teams were crowned from each course andadvanced to the three-hole “Grand” Champion Shoot-Out inIda Grove.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.)

Odebolt course champions (L-R) are Randy Bach of GOMACO; OwenBolte of United Bank of Iowa; Dan Murfey of Associated ConstructionPublications; and Blake Driskell of Gerdan Slipforming Inc.

Putting Tournament champions BrianBuchholtz (L) of Anderson Contractors Inc.and Bob Norris of L.G. Roloff Construction.

Mapleton course champions (L-R) are Craig Endahl ofPACE Manufacturing Inc.; Chris Brown of AsphaltConcrete Equipment & Supplies; Randy Held of RoadBuilders Machinery & Supply Company Inc.; and BrianManatt of Manatt’s Inc.

Ida Grove course champions (L-R) are Tom Schmitt ofConcrete Foundations Inc.; Kent Godbersen of GOMA-CO; Sam Clark of Texas Sterling; and Kelly Steeves ofLeica Geosystems Inc.

Scramble Tournament “Grand” champions (L-R) are BradJohnson of Road Machinery & Supplies Company; Travis Mann ofLuxa Construction Company; Dustin Keith of Hi-Way Paving Inc.;and Arden Jones of Concept Sales Inc.

Contractors’ Shoot-Out champions (L-R)are Park Estes of APAC Central; CharlieKnudsen of Concrete Technologies Inc.; andKarl Loder of Bituminex Paving.

Page 83: Midwest 22 2015

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2015 • Page 83

CASEY EQUIPMENTCOMPANY

www.casey-equipment.com1603 East Algonquin Rd.

Arlington Heights, IL 60005847/437-8686

Fax: 847/437-873816754 New Ave.

Lemont, IL 60439630/257-1261

Fax: 630/257-06141548 Huntwood Drive

Cherry Valley, IL 61016815/332-8222

Fax: 815/332-3056

RMS RENTALS12520 Quentin Ave S.

Suite 100Savage, MN 55378

952/895-9595800/888-9515

ROAD MACHINERY &SUPPLIES CO.

5633 W Hwy 13Savage, MN 55378

952/895-9595800/888-9515Duluth, MN218/727-8611800/888-9535Virginia, MN218/741-9011800/752-4304Negaunee, MI906/475-6488800/888-9565Sioux City, IA217/252-0538800/633-9104

Des Moines, IA515/282-0404800/555-1445

Cedar Rapids, IA319/363-9655800/616-6615

Milan, IL309/787-1742800/633-9114

tssteesBBeehheTTh

ppppoopHHotlltiilTTit

r J eer Just Got BettervveaavPPareerppe

r Just Got Better

r Just Got Better ttrnntIIn

iincciuucdduoodrrottr

ehhetthgnngiin

G00G000000110e

G

8 - 13 ft LeeBoy Legend Screed System

8 - 13 ft LeeBoy Legend Screed System

8 - 13 ft LeeBoy Legend Screed System

8 - 13 ft LeeBoy Legend Screed System g

8 - 13 ft LeeBoy Legend Screed System

Hydrostatic Propulsion ControlsLow Deck Configuration9” Steel LeeBoy’

Hydrostatic Propulsion ControlsLow Deck Configuration

Alloy Segmented Cast 9” Steel s Under LeeBoy’

8 - 13 ft LeeBoy Legend Screed System

Hydrostatic Propulsion ControlsLow Deck Configuration

Alloy Segmented Cast Auger Cut Off Gates

8 - 13 ft LeeBoy Legend Screed System

Hydrostatic Propulsion Controls

AugersAlloy Segmented Cast Auger Cut Off Gates

8 - 13 ft LeeBoy Legend Screed System

Steel TDual Control Stations

rack Drive with Steel TDual Control Stations

Automatic rack Drive with Dual Control Stations

AdjustmentAutomatic

Adjustment

, Inc. 50 VT LeeBoy y, Inc. 500 Lincoln County Pkwy Ext., Lincolnton, NC 28092 Call 704.966.3300 or www

www

, Inc. 500 Lincoln County Pkwy Ext., Lincolnton, NC 28092 Call 704.966.3300 or www

. www

Lincolnton, NC 28092 Ca

all 704.966.3300 or ww

. com . com . com

.com.LeeBoyy.com ww w.LeeBoy

. com

Page 84: Midwest 22 2015

Page 84 • October 24, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Vögele MT 3000-2i Lands in North America With New DesignThe newly designed MT 3000-2i material

transfer vehicle from Vögele offersincreased performance in material transfervehicles for asphalt paving. This machine isdesigned with the contractor in mind forenhanced productivity, low operating costsand maneuverability, according to the manu-facturer.This high performance unit weighs

56,000 lb. (25,401 kg), with 18-ton (16 t)storage capacity, heavy enough to get the jobdone, but portable enough to haul to operateon bridges. Its low profile gives it a low cen-ter of gravity, and innovations give it an edgein performance and productivity.The MT 3000-2i can move 1,300 tons

(1,179 t) per hour, and active remixing isachieved by two 16-in. (40.6 cm) diameterconical augers in the receiving hopper. Bothprimary and secondary conveyor belts are 43in. (109 cm) wide, and are heated to keepmaterial from sticking, and eliminate “warmup” loads. The secondary conveyor canswing 55 deg to left or right. Heated scrapersalso keep the belts constantly clean with aminimum of fuss.Material transfer vehicles eliminate con-

tact between truck and paver, resulting insmoother mats. They also fight thermaland material segregation. Essentially, they

provide noncontact paving between truckand paver, and surge capacity to allow thepaving process to continue during truckexchanges.More efficiency is achieved by providing

active remixing in its receiving hopper, anda passive remixing in a 17- or 22-ton (15 or20 t) “receiving insert” in the paver hopper.A grate system in the receiving insert breaksup cold crusts as they enter the insert, allow-ing smaller clumps to absorb heat from thehotter surrounding mix. This passive remix-

ing insert costs nothing in terms of energy ormaintenance, in fact it enhances a lower costof total ownership, according to the manu-facturer.The receiving hopper empties in advance

of the next dump, a rear-tilting front of thehopper will move stray material toward theconical augers. Conical augers themselvesminimize end-of-load and start-of-load seg-regation.Its extremely efficient feed system has an

auto feed function that will automatically

slow or shut down feeding when the paverhopper insert is filled, while a maximumdelivery override switch will deliver materi-al at maximum throughput for instant fillingof the hopper insert. Moreover, a propel sys-tem featuring a unique auto distance controlkeeps the feeder at a pre-set distance fromthe paver, so the operator can focus only onsteering and the trucks dumping in front. Inessence, the paver electronically pushes thefeeder.Also a collision bar on the paver insert

will halt Vögele pavers if they get too closeto the MTV. The water-cooled Deutz enginefeatures 215 hp and is Tier IV-interim emis-sions-compliant.While the MT 3000-2i is new to this con-

tinent, it is a product that has been developedand used in Europe for decades. For NorthAmerica, the design has been changed toinclude swinging conveyors and continuousrubber tracks instead of steel tracks, and it’sbased on a proven design, that’s efficient,effective, productive and providing the con-tractor with ultimate operating performance.For more information, call 615/501-0600

or visit www.wirtgenamerica.com.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

The Vögele MT 3000-2i is a newly-designed material transfer vehicle.

IC Offers Opportunities to Dramatically Reduce Guessworkthe ICMV calculations of IC sys-tems from manufacturers includ-ing Hamm, BOMAG, Caterpillarand Sakai. These calculations werethen compared to actual asphaltdensity values from core samples.After two years of testing and eval-uation, the FHWA released a 321-page report in December 2014outlining their findings.

ICMV: Not Correlated to Density

The report found that ICMVvalues alone cannot reliably pre-dict core densities, stating, “Thepass-by-pass ICMV correlate wellwith nuclear density gauge meas-urements during breakdown com-paction. The final ICMV does notcorrelate well with core densities.” Numerous factors are cited in

the lack of correlation, includingmeasurement depths, footprintsand a change in drum reboundswhen asphalt temperatures dropbelow a certain threshold. Thereport does, however, insist that ICsystems “can be used as an

enhanced tool for quality controlby monitoring ICMV in real timeduring construction in order tomaximize the window of opportu-nity for compaction.”

Entering a New AgeIn 2008, the FHWA devoted

$200,000 under the Highways forLIFE Technology Partnershipsprogram with the University ofOklahoma (owner of multiplepatents for this technology) forstudying an alternative method ofdetermining density. Originallytermed Intelligent AsphaltCompaction Analyzer (IACA), thistechnology is what eventually cameto be named Volvo Density Direct.Density Direct was used on var-

ious full-depth and overlay asphaltpavement projects and later evalu-ated at independent sites through-out the country. The results wereoverseen by University ofOklahoma researchers and showedthat Density Direct calculationswere proven to be within 1.5 per-cent of core samples every time at180 test locations.

This technology has beenlicensed to Volvo by the Universityof Oklahoma and integrated intothe newly available Volvo IC sys-tem. As with other IC systems,Volvo IC with Density Directoffers surface temperature map-ping, pass mapping and data col-lection capabilities. However, theVolvo system offers the added ben-efit of real-time density calcula-tions. At the touch of a screen, thecompactor operator can see real-time density information across100 percent of the mat, and unlikeICMV calculations, the DensityDirect data has a proven correla-tion to actual core densities within1.5 percent accuracy.

On the Job With Density Direct

Within the Density Direct sys-tem is a calibration screen, wherethe user sets the range of densitiesthat are based on the mix designsheet for the lift being constructed.Calibrations also are saved, sooperators can assign calibrations tocertain elements of a job, and

quickly switch back and forthbetween calibrations to meet thedemands of specific job elements.The user interface of Volvo IC

with Density Direct depicts a den-sity map, showing each square unitof rolled surface in a color repre-senting density, and also providesreal-time numerical readings ofdensity, surface temperature, andpass count displayed on one side ofthe screen. The user also can togglebetween density mapping, surfacetemperature mapping and passmapping. The pass mapping func-tion captures each compactor passand drum overlap with a differentcolor, so that the operator can easi-ly see gaps and work to maintainuniform coverage. Temperaturemapping shows the operator thepath of the compactor overlaid withthe recorded surface temperature.Density Direct has the advan-

tage of a proven correlation to coredensities as compared to other sys-tems, but regardless of which ICsystem a road contractor chooses,one thing is clear: road contractorsthat use IC are in a better position

to win DOT bids and are betterable to make quality control deci-sions on the fly.

Get on Board or Miss the Boat

Road contractors aren’t alwaysimmediately receptive to new tech-nologies that come with newexpenses. However, the necessityfor IC is growing, and contractorsneed to familiarize themselveswith the technology in order to staycompetitive. Currently, 20 stateshave adopted IC standards and aremandating that road contractorsuse IC systems on certain projects.This number is only expected togrow, and as such, road contractorswho have demonstrated experi-ence with IC systems will be theones most apt to win the bids.As a road contractor, you should

be asking yourself which costsmore — an IC system, or lost bidsand reduced pavement quality.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

COMPACTION from page 79

Page 85: Midwest 22 2015

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2015 • Page 85

THE COMPACTION EXPERTS

Our rollers are pretty basic.Basically perfect.BOMAG improves on perfection with the BW120AD-4 roller.Want a roller that will fi nish the job better, faster and more effi ciently? Then you want the BW120AD-4 from BOMAG. We took the top tandem-drum vibratory roller in its class and made it even better: A more powerful 33.8-hp diesel engine, a 14-percent faster working speed, and a larger operator’s platform with standard laterally sliding seat for better visibility. Improving perfection? That’s just the basics with BOMAG.

To do the best job, you need the best equipment.To learn more visit www.bomag-americas.com,

or call 1-800-78-BOMAG today.

1400 W. Ogden Ave.Naperville, IL 60563

630/355-7150

Rockford, IL815/961-3160

South Holland, IL708/331-6362

Wauconda, IL847/526-7700

Rockdale, IL815/730-9011

10874 East Pike Rd.Cambridge, OH 43725

740-432-6303www.southeasternequip.

comEvansville, IN 47715

812-476-7321

Fort Wayne, IN 46808260-483-8868

Indianapolis, IN 46268317-872-4877

Burlington, KY 41005859-586-6133

Holt, MI 48842517-694-0471

Novi, MI 48374248-349-9922

Brilliant, OH 43913740-598-3400

Brunswick, OH 44212330-225-6511

Dublin, OH 43016614-889-1073

Gallipolis, OH 45631740-446-3910

Heath, OH 43056740-522-3500

Mansfield, OH 44903419-529-4848

Marietta, OH 45750740-374-7479

Mentor, OH 44060440-255-6300

Monroe, OH 45050513-539-9214

North Canton, OH 44720

330-494-3950

Perrysburg, OH 43551419-874-0331

Troy, OH 45373937-416-6397

W250 N6851 Hwy 164

Sussex, WI 53089262/246-5700

262/246-5719 Fax

Madison, WI608/222-9191

Eau Claire, WI715/832-3443

De Pere, WI920/338-5800

Abbotsford, WI715/223-2381

Negaunee, MI906/475-4181

Page 86: Midwest 22 2015

Page 86 • October 24, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

SP 15i Features Tier IV Interim Emissions Technology Wirtgen’s SP 15i concrete slip-

form paver updates the existing SP15 with Tier IV interim emissionstechnology, but both are true multi-purpose machines that lay curb andgutter, barrier, sidewalk, V-ditch,special applications and slabs.Both of these versatile machinescan be configured on site for left-or right-side pouring.Like the SP 15, the SP 15i

accepts AutoPilot technology fromWirtgen, a GPS-based system thatensures highest precision and opti-mum efficiency in slipformpaving, regardless of whetherstraight profiles, highly complexcurved paths or closed profile con-figurations need to be placed.The SP 15i has a maximum

paving width of 6 ft. (1.8 m), max-imum barrier/parapet placementheight of 4 ft. 3 in. (1.3 m), and amaximum operating weight of28,500 lb. (12,927 kg). It has best-in-class trimming capacity, quickonsite changes for left or right sidepouring, job site mobility, andpours a tight, smooth radius withall-track steering and positioning.

The SP 15i also features an Ecomode, which matches engine rpmto machine power requirements,thus saving fuel and reducing emis-sions. It’s powered by a Deutz TCD

4.1 L4 engine generating 127 hp.The SP 15i slipform paver sets

new standards as a multipurposemachine for offset concretepaving. The compact machine has

a heavy-duty design for tough day-to-day operation, increasedmaneuverability and ease of opera-tion. It’s an ideal choice for pour-ing offset profiles and for sidewalk

up to 6 ft.The SP 15i owes its broad range

of capabilities to the highly flexiblearrangement of its mold and trackunits, as a great variety of setupoptions make the machine adapt-able to most jobsite conditions. Different-profile molds can be

mounted on the left or right side ofthe paver without the need fortime-consuming machine conver-sions. The two front track units canbe chosen in pivot design, whilethe rear track unit can be chosenwith mechanical or hydraulicadjustment to either side.The flexibility of the SP 15i is

enhanced by options such as trim-mer, concrete feeding via belt con-veyor or auger conveyor, and elec-tric or hydraulic vibrators. Thecompact, overall dimensions of theSP 15i allow for easy transport.For more information, call

615/501-0600 or visit www.wirt-genamerica.com.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

The SP 15i has a maximum paving width of 6 ft. (1.8 m), maximum barrier/parapet placementheight of 4 ft. 3 in. (1.3 m), and a maximum operating weight of 28,500 lb. (12,927 kg).

CP 1260, CP 1290 Handheld BreakersFeature Updates, Ergonomic Look Chicago Pneumatic Construction

Equipment offers the CP1260 and CP1290 handheld pneumatic breakers.The breakers offer the same quality andversatility as previous pneumaticbreaker models, but with updated fea-tures, more power, and a sleek,ergonomic look, according to the man-ufacturer. Known globally for their high-

impact technology and durability,many of the same features of the CP1230 and CP 1240 were rolled into theCP 1260 and CP 1290, respectively.Offering a variety of sizes, there is a CPpneumatic breaker option for everyapplication. “The CP handheld pneumatic break-

ers have traditionally delivered an effi-cient and powerful solution for anydemolition application,” said GusArmbruster, product manager of pneu-matic tools. “The CP 1260 and CP1290 have carried through the impor-tant features of previous models, buthave incorporated a number of features

new to the handheld line.” The list of added features include;

ergonomically designed handles toreduce operator fatigue, a streamlined,flatter profile for improved operatorvisibility, and new durablepolyurethane front head springs thatreduce wear and extend the life of thebreaker and its internal components. In addition to various innovative fea-

tures, the CP 1260 and CP 1290 offereven more power than previous mod-els. “The CP 1260 and CP 1290 have

enough power to make them an idealsolution for a variety of applications,”said Armbruster. “By improving uponpast models versus starting from squareone, we are able to provide truly versa-tile, powerful, and efficient tools.”Another key feature of the CP 1260

and CP 1290 breakers is that many ofthe components are compatible withprevious generations of pneumaticbreakers, so that if a problem shouldarise with the new equipment, repairs

can be made quickly and easily.

About the CP 1260More than 2 ft. (.6 m) long, and 63

lbs. (28.5 kg) of operating weight, theCP 1260 is compact enough to trans-port to any job site easily. Delivering1,300 powerful blows per minute(bpm), it is also powerful enough tohandle a number of medium to heavy-duty applications.

About the CP 1290The CP 1290 weighs in at 81 lbs.

(36.7 kg) and has a length of 28 in. (71cm), making this a powerful tool for itscompact size. The CP 1290 delivers1,100 bpm. The most powerful of theCP handheld line, the 1290 is ideal forheavy-duty demolition work.For more information visit

www.cp.com.(This story also can be found on

Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)

Many of the same features of the CP 1230 and CP 1240were rolled into the CP 1260 and CP 1290, respectively.

Page 87: Midwest 22 2015

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2015 • Page 87

Announcing Our New Distributor in Arizona

The Worldwide Leader in Concrete Paving Technology

[email protected] � www.gomaco.com

CONCRETE STREETS AND HIGHWAYS � AIRPORT RUNWAYS � CURB AND GUTTER � SIDEWALKS RECREATIONAL TRAILS � SAFETY BARRIER � BRIDGE PARAPET � BRIDGE DECKS � IRRIGATION CANALS

GOMACO CORPORATION IN IDA GROVE, IOWA, USA � 712-364-3347

ROAD MACHINERY & SUPPLIES CO.Des Moines, IA

515/282-0404 • 800/555-1445

Sioux City, IA

712/252-0538 • 800/633-9104

Cedar Rapids, IA

319/363-9655 • 800/616-6615

Milan, IL

309/787-1742 • 800/633-9114

SWANSTON EQUIPMENT COMPANY3450 West MainFargo, ND 58103

800/369-0371

3915 Burdick Expressway E.Minot, ND 58703

800/210-8766

Page 88: Midwest 22 2015

Page 88 • October 24, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

AutoPilot Stringless Paving

The Wirtgen AutoPilot — a stringless con-trol system for use with Wirtgen SP 15/SP 15iand SP 25/SP 25i concrete slipform pavers —is a user-friendly, cost-effective control sys-tem for poured-in-place concrete profiles,such as curbs, safety barriers or slabs. AutoPilot is a GPS-based system that

ensures precision and efficiency in slipformpaving, regardless of whether straight pro-files or highly complex curved paths arebeing poured, according to the manufacturer.The Wirtgen AutoPilot control system

bypasses the need to establish a digital terrainmodel because programming is completedby using a rover pole to capture coordinatesor by simply using the job site plans. This

means a surveyor is not required. The AutoPilot system utilizes a computer

integrated in the machine, as well as a controlpanel that allows intuitive operation. Forcourse control, two machine-mounted GPSreceivers communicate with an additionalGPS reference station positioned on site. Forprecise grade control, a laser, ultrasonic sen-sor or total station is used. The machine con-trol software is a proprietary Wirtgen devel-opment.For more information, call 615/501-0600

or visit www.wirtgenamerica.com.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

The Wirtgen AutoPilot is a user-friendly,cost-effective control system for poured-in-place concrete profiles, such as curbs,

safety barriers or slabs.

Serving the Asphalt Industry for 25 Years866-430-7539

3517 Wayne White Rd., Climax, NC 27233

[email protected]

2008 Volvo DD138HFA double drum 84” high frequen-cy vibratory roller, Cummins 6.7L diesel engine, doubledrum drive, water system, 15 tons

1995 Rosco SPRH-H chip spreader, 12 ft spread hop-per w/platform, hydrostatic drive, Cummins 5.9L dieselengine

1999 Blaw Knox PF 2181 paver, Omni IA screed 8-13ft w/diesel heat, Cummins diesel engine, power crown& slope, front wheel assist

2005 & 2009 Cat AS-2301 screeds, 10-18 ½ ft, dieselheat, power crown & slope

2005 Cat AP1055D track paver, Extend-A-Mat 10-20Belectric heated screed, power crown, slope & height,Cat C7 diesel engine

2006 Blaw Knox PF 3200 paver, Omni IIIA 10-18 ½ ftscreed w/diesel heat, power crown and slope, Cumminsdiesel engine (2005, 2004 & 2002 yrs also available)

2000 Rosco Maximizer 3 distributor, 2000 gallons,EZ-3S computer w/1 ft cut-offs, diesel burner, 8-16 ftextending spray bar, Freightliner FL70 w/Cummins dsleng, 5 spd trans, 2 spd axle

2005 Broce CR350 broom, a/c, 8 ft broom, Cat dieselengine, water system (2014 yr also available)

2005 Etnyre Centennialdistributor, 2000 gal-lons, computerized w/1ft cut-offs, propane heat,16 ft spray bar, IH 7300w/DT466 dsl eng, 5 spdtrans, 2 spd axle

Page 89: Midwest 22 2015

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2015 • Page 89

-MT

M413XT

ULDINMAs best and heaviest screed lay down the Superior mats your company desires. With 10 years under the belt of proven the industry’

results, the 1 Anniversary0th

ULDIN Paving Products is dedicated to developing products that exceed expectations. See for yourself what makes s best and heaviest screed lay down the Superior mats your company desires. With 10 years under the belt of proven

, Silver-16 ScreedAnniversary

Paving Products is dedicated to developing products that exceed expectations. See for yourself what makes s best and heaviest screed lay down the Superior mats your company desires. With 10 years under the belt of proven

, Silver-16 Screed is better than ever

Paving Products is dedicated to developing products that exceed expectations. See for yourself what makes

Pr

s best and heaviest screed lay down the Superior mats your company desires. With 10 years under the belt of proven

Paving Products is dedicated to developing products that exceed expectations. See for yourself what makes

yecision Spr

s best and heaviest screed lay down the Superior mats your company desires. With 10 years under the belt of proven

Products shown with optional equipment.

Paving Products is dedicated to developing products that exceed expectations. See for yourself what makes s best and heaviest screed lay down the Superior mats your company desires. With 10 years under the belt of proven

Products shown with optional equipment.

results, the 1

Contact your

Anniversary0th

MA1750-C

, Silver-16 Screed

N

Anniversary

ULDINMA P

MA dealership today ULDIN

, Silver-16 Screed

dealership today and review all the choices available from the

. is better than ever

oducts... MASTERS OF THE MAving Pra

oducts... MASTERS OF THE MA

dealership today and review all the choices available from the ULDINMA

ULDIN

T! THE MA AT!

FINKBINER EQUIPMENT CO.

15 W 400 North Frontage Road

Burr Ridge, IL 60527

Ph: (630) 654-3700

Fax: (630) 654-3792

www.finkbinerequipment.com

Page 90: Midwest 22 2015

Page 90 • October 24, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

DePere WI920/532-0165

Fax: 920/532-0526Deforest WI608/842-4151Franksville WI 262/835-2710Schofield WI 715/355-9898

Eau Claire, WI715/874-5400Escanaba MI906/786-6920Springfield, IL217/789-7711Marengo, IL815/923-4966

Bolingbrook IL630/739-7474Carterville, IL618/985-3399Bridgeton, MO314/291-1330

Cape Girardeau, MO573/334-5252

Columbia, MO573/814-0083Palmyra, MO573/769-2056Portage, IN

219/764-8080

ROLAND MACHINERY BRANDEIS MACHINERY & SUPPLY COMPANY

1801 Watterson Tr.Louisville, KY 40299

502/491-4000 • Fax: 502/499-3195www.brandeismachinery.com

Evansville, IN812/425-4491 • Fax 812/425-1171

Corbin, KY606/528-3700 • Fax 606/528-9014

Lexington, KY859/259-3456 • Fax 859/254-0783

Stanville, KY606/478-9201 • Fax 606/478-9208

Paducah, KY270/444-8390 • Fax 270/575-4907

Indianapolis, IN317/872-8410 • Fax 317/872-8417

Ft.Wayne, IN260/489-4551 • Fax 260/489-1620

Page 91: Midwest 22 2015

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2015 • Page 91

DePere, WI920/532-0165

Deforest, WI608/842-4151

Franksville, WI262/835-2710

Schofield, WI715/355-9898

Eau Clair, WI715/874-5400

Escanaba, MI906/786-6920

Springfield, IL217/789-7711

Carterville, IL618/985-3399

Bridgeton, MO314/291-1330

Cape Girardeau, MO573/334-5252

Columbia, MO573/814-0083

Palmyra, MO573/769-2056

Portage, IN219/764-8080

100 Sheridan Ave.Des Moines, IA 50313

515/282-0404

800/555-1445

2525 16th Ave SWCedar Rapids,

IA 52406319/363-9655

800/616-6615

1400 North Hwy 75Sioux City, IA 51105

712/252-0538

800/633-9104

606 W. 10th Ave.Milan, IL 61264309/787-1742

800/633-9114

Page 92: Midwest 22 2015

Page 92 • October 24, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Wacker Neuson Offers Safer Trench Compaction Solution Wacker Neuson is introducing a new and

improved version of its RTx trench rollerincluding the addition of a new engineoption. The line-of-sight infrared remotecontrol (SC3) not only offers a safer remotecontrolled trench roller compared to radiofrequency controlled units; the RTx nowcomes with a third receiving eye on the topof unit which ensures continued smoothoperation along the trench without interrup-tion as it travels under shoring cross bars. Wacker Neuson’s RTx SC3 (Smart

Control 3) was designed with both operatorand jobsite safety in mind. With the RTxSC3, the operator remains out of the trench,away from the dust and noise of themachine, but must keep a line-of-sight fromthe controller to the receiving eye at alltimes. This control technology eliminatesdangerous blind spots should the unit movebehind obstacles and other obstructions, orshould the operator get distracted, keepingthe job site and workers better protected.Radio frequency controls do not safe guardagainst these blind spots potentially endan-gering others on the job site. RTx SC3 hasadditional built-in safety precautions. Themachine will stop moving and vibrating ifthe operator comes within 3 ft. (.9 m) of theroller’s sensing eyes or releases the con-

troller’s joysticks, making sure that the oper-ator is always at a safe distance from themachine.Wacker Neuson’s infrared remote control

features a 16-channel transmission, whichallows for multiple machines to be used on

the same job site without the threat of inter-ference with one another. The infrared sys-tem is not subject to radio interference fromother jobsite systems such as cranes, boompumps and other radio control equipment.The infrared remote control box is easy to

operate with two joystick levers and is fullyenclosed protecting it from moisture and dirt.

New Engine OptionWacker Neuson’s popular trench roller is

now available with a choice of engines. Thenew RTKx is powered by a 20.7-hp Kubotadiesel engine. The RTLx is powered by a19.8-hp Kohler diesel engine. Whicheverengine option is chosen, contractors will findthe same features and performance results.The RTx was the first articulated trenchroller with the industry preferred below theaxle exciters that allow efficient transfer ofcompaction energy to the soil. A compactdesign with low center of gravity, high andlow compaction force, plus the ability tochange the drums from 32 to 22 in. (81 to 56cm) provides flexibility on the job site,according to the manufacturer. Wacker Neuson’s RTx is not only a safer

and more productive trench roller. It alsocomes with a maintenance free lower endthat saves time and money and increasesuptime. The lifetime lubricated bearings anddrive gears with lube free exciter meansthere is no oil that needs to be changed.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

With the RTx SC3, the operator remains out of the trench, away from the dust andnoise of the machine, but must keep a line-of-sight from the controller to the receiv-ing eye at all times.

Atlas Copco LT5005, LT6005 RammersProve Ideal for Narrow SpacesAtlas Copco recently introduced two new

rammers, replacing the LT5004 and LT6004.These new rammers feature ultra-slim bod-ies, ideal for getting closer to structures andthrough narrow spaces. Like all Atlas Copcorammers, the new LT5005 and LT6005 pro-vide high centrifugal force and speed fordeep and effective compaction.At a mere 6 in. (15 cm) wide, the LT5005

is 3 in. (7.6 cm) smaller than its predecessorand the LT6005 is 9 in. (22.8 cm) wide — 2in. (5 cm) shorter than the previous model.These slim designs enable operators to easi-ly compact cohesive and granular soils inconfined spaces, such as small trenches,ditches, backfills and foundations. Thesmaller size also makes it easy for operatorsto work close to walls or posts. Atlas Copco designed the rammers with a

rubber isolator on each side of the handle toabsorb vibrations that would otherwise betransmitted to the operator. This reduces therisk of injuries, such as carpal tunnel syn-drome and hand-arm vibration syndrome.The rammers also feature a single liftingpoint that allows users to easily move them

from hard-to-reach spaces with largemachinery, such as a crane.The rammers are equipped with a Honda

GXR120 engine that features an overheadcamshaft and timing belt that operate withminimal noise. The oil alert LED indicatoron the rammers notifies operators when theoil level is too low for proper engine lubrica-tion. The rammers also are equipped with athrottle control with three fixed positions,stop, idle and run. This feature eliminates therisk of leaving the throttle half open, whichoptimizes fuel use. “The slimmer profile and reduced weight

truly improve the machines’ handling intight spaces, allowing workers to get intoareas they couldn’t before,” said DarrellEngle, product development specialist.Atlas Copco also designed the LT5005

and LT6005 for easy onsite maintenance.Each unit is equipped with a large air filterthat users can change without tools. Anupgraded air filter indicator is available uponrequest. It is designed to alert the operatorwhen a filter needs replacing. Users also canequip the units with hour meters to accurate-

ly track service intervals.Operators can use Atlas Copco’s

optional trolley to quickly andsafely lift and transport the ram-mers. During lifting and trans-portation the rammers activatean automatic integral lock,which prevents excessive wearon the shock absorbers. Plus, thefuel tank features an improved seal toprevent fluids from leaking duringtransportation. For more information, call 800/732-

6762 or visit www.atlascopco.us.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Atlas Copco rammers are versatilecompaction tools developed forwork on cohesive and granularsoils. Their high centrifugal forceand speed contribute to theirdeep and effective compaction.

Page 93: Midwest 22 2015

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 24, 2015 • Page 93

You’re serious about getting your bonus. And your crew thanks you.

DEALER LOGO

Contact your local dealer:

Dealer Name

Contact your local dealer:

T, SCity123.456.7890

T, SCity123.456.7890

ALERDELOGO

f paOur line of pry ohistor

maximizing your earnings, these machines deliv

s sets the standars and compactorervf paeputation fen technology and a rovf pr

maximizing your earnings, these machines deliv

ving. Weliable asphalt paor rd fs sets the standaration. When it comes to y-leading innovor industreputation f

t in action at . See smarermaximizing your earnings, these machines deliv olvv

e a long ve having. W We haation. When it comes to

oadstrom/smare.cocolv .

McAllisterEquipment Co.12500 S. Cicero Ave.Alsip, IL 60803708.389.7700

Villa Park, IL630.530.7600

Rockford, IL815.227.0555

East Peoria, IL309.694.4455

Springfield, IL217.789.0351

Road Machinery & Supplies Co.5633 W Hwy 13Savage, MN952.895.9595800.888.9515

Duluth, MN218.727.8611800.888.9535

Virginia, MN218.741.9011800.752.4304

Cedar Rapids, IA319.363.9655800.616.6615

Des Moines, IA515.282.0404800.555.1445

Sioux City, IA712.252.0538800.633.9104

Contact your local dealer:

Equipment

Finkbiner Equipment Co.15 W 400N Frontage Rd.Burr Ridge, IL 60527

630-654-3700Fax: 630-654-3792

www.finkbinerequipment.com

Highway Equipment Company of Ohio1405 Timken Place SWCanton, OH 44706

330-915-8391Fax: 330-915-8411

www.highway-equipment.com

CMW Equipment8668 Olive Blvd.

St. Louis, MO 63132314-993-1336

Fax: 214-993-1467

www.cmw-equip.com

Page 94: Midwest 22 2015

Page 94 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 95: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 95

The Easy Way To Advertise Your Equipment

Run In Two Consecutive IssuesBlack & White $105 • Color $155

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-QualitySUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call

Summit Supply LLCEast, West & South Warehouses

888-888-1248 • [email protected] 21-22 TM

2012 Cat 252 B3 Skid Steer Loader, 551 Hrs,Serial/Stock Number: cat0252bctnk01493, 1-Owner,2-Spd, Cab HVAC, power-tach .......................$34,500Top Notch Equipment, Inc. 888-824-6559 21-22 PK

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS &TRACK LOADERS, The most trusted brand in Americabrings you quality tracks for your specific make and model.

Call McLaren 888-492-4230 22-23 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction;tire protection; machine stability; self-cleaning; less grounddamage; fully rebuildable; interchangeable shoe types.

Call McLaren 888-492-4230 22-23 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, back-hoes, telehandlers, wheel loaders - Nu-Air Semi-PneumaticTire Technology: no flats ever; soft, air-cushioned ride; last3 to 5 times longer than regular pneumatic tires; rimsincluded; same day shipping; various tire sizes available.

Call McLaren 888-492-4230 22-23 DH

2006 Ditch Witch FX60 Vacuum Excavator, 800 galspoils capacity, 200 gal water tank, 4 cylinder Cumminsengine, 3251 hours ..............................................$32,500

Call Tania 614-443-9751 x237 21-22 EB

2010 CAT 305C CR, EROPS, 2200 hours, Hyd.thumb, new tracks, Blade ............................$CALL

Courts Machinery • 507/678-2752 22-23 PK

New Side-Entry JCB Skids. Priced to MoveCall Don 316-943-9311 22 JM

2007 JCB 1CX, 8’ Dig Depth, 2,263 Hrs ...................$21,000Call Don 316-943-9311 22 JM

2010 Gehl V270 Vertical Lift Skid Loader, Like New,One Owner, 840 Hrs, OROPS, ISO Joystick Controls,74” 22.8 Cu. Ft. HD Bkt, Custom Radiator Guard,Heat & Enclosed Cab, Super Nice Machine! ..$33,500

Call George 219-696-8911 22 JM

2006 Takeuchi TL150, s/n 21503859, 2950 Hrs,Cab w/AC, Case Controls, 80” Smooth Bkt .$29,500

Call Mark 630-739-7770 22 JM

2012 Case DV202, s/n DDDDV202NCTF2016,1175 Hrs, ROPS, Right Side Drive Lever, 47” Drum....................................................................$27,500

Call Mark 630-739-7770 22 JM

2013 Case DV26, s/n JDBODV26NDRT25304, 850 Hrs, ROPS, Road Lights, Right Side DriveLever, 47” Off Set Drum .............................$29,500

Call Mark 630-739-7770 22 JM

2007 Ditch Witch XT1600, 221 Hrs, Tracks at90%, Excellent Condition ................................$49,500

Call Tim 630-665-5600 22 JM

Doosan DL 220, 380 Hrs, 3 Yd Ride Control, QuickCoupler ..........................................................$135,000

Caleb Hinkkanen 800-456-4005 Ext. 143 21-22 PK

Sentry Tires - Skid Steer and Wheel Loader Tiresat Volume Buyers Prices!

Call Mark Sladoje for Sizes & Pricing614-395-4064 21-22 EB

2003 Kubota KX121-3, 1871 Hrs (7/1/15), Cabw/AC, Medium Arm, Standard Track, 12” RubberTracks, Aux. Hyd, Blade, Angle Blade........$27,900

Call Scharber & Sons 763-428-4107 22-23 PK

2006 Cat XQ-80 Generator, 8146 Hrs ...........$19,000Albert Medcalf or Marcela Newman

502-456-4050 22-23 EB

New 2015 Grove YB 4409XL, 8.5 Ton Carry Deck,Cummins Tier 4 , 30’ Main Boom, 6’ Jib, EnclosedCab, Auxiliary Light Package,2-4 Wheel & CrabSteering, Outrigger Monitor System, Block, Ball,Cleveland Ohio

Call Andy Forepaugh 216-316-1511 21-22 EB

2009 Grove YB 7722XL, 22 Ton Carry Deck,Cummins Engine With Scrubber, Enclosed Cab,67’ Main Boom, 17’ Jib, 4 Wheel Drive , AuxiliaryLight Package, Block, Ball, Cleveland Ohio

Call Andy Forepaugh 216-316-1511 21-22 EB

Page 96: Midwest 22 2015

Page 96 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment

Run In Two Consecutive IssuesBlack & White $105 • Color $155

2009 John Deere 844K, s/n 624223, 10,205 Hrs,Cab, Heat & A/C.......................................$136,000

Call David 219-696-5680 22 JM

2012 Volvo MT2000 Milling Machine, Cummins610HP Tier 3 Dsl, 86” Keystone Cutter ....$295,000

800-283-1336 22 JM

2001 Blaw Knox PF3200 Paver, Omni III,Cummins Diesel, Ultra 3s, 4400 Hrs ..........$55,000

800-283-1336 22 JM

1989 CMI TR225B 3-Track Trimmer, New 16”Cutter Assembly, Hydromation Controllers..$89,000

800-283-1336 22 JM

2009 Volvo MW500 Milling Machine, 20” WideCutter, Deutz Diesel Eng, Rear Conveyor.$172,000

800-283-1336 22 JM

Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $105 per ad, $50 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.

For more information, call Construction Equipment Guide today at

800/523-2200

Magnum Attachments Inc., a leadingDistributor of Hydraulic Attachments, has anoutstanding opportunity for a Regional DistrictManager for Midwestern United States.

As a District Manager, the candidate will beresponsible for managing sales of the MagnumProducts through an authorized distributionnetwork. The candidate will be responsible formaintaining growth within existing distribution aswell as establishing new distribution channels.

The candidate should have prior experience in wholesale distribution, be self motivated, PCproficient (Microsoft Office) and willing to travel75% of the time.

To learn more about our company and products please visit our website at www.magnumattachments.com.

We offer a competitive remuneration package.Interested candidates may email their resume to

[email protected] by fax to 877-640-2863.

EMPLOYMENT OPPORTUNITY

EXCAVATORS

Hydraulic Excavators

Caterpillar 315CL, S/NCJC2002, Includes hydraulicquick attach, good condition,7,200 hrs....................$59,500.

Gibson Machinery, LLC440-439-4000

Mini Excavators

Wacker Neuson 1404,Compact, 7'4'' Digging Depth,Unit #18372, 715 hours ............................................$13,497.

A-Z Equipment Rental & Sales480-695-0672

FORESTRY EQUIPMENT

Mulching Tractors

Fecon FTX148L with STEELTRACKS, 942 Hrs., RearWinch, Back Up Camera,Choice of 5 MulchingAttachments, Refurbished byFecon, Ready To Go To Work.

Call Jim513-284-8990

Mulching Attachments

Fecon BH74SS MulchingAttachments for High FlowSkid Steers (30GPM @3000PSI or more) - NEW andRefurbished. Ready To Go ToWork

Call Jim 513-284-8990

LANDSCAPE EQUIP.

Landscape - Misc.

Exmark Lazer Z, Zero TurnMower, 27 HP Kawasaki V-twin, 60'' Deck, Unit #40284,Good condition, 501 hours ..........................................$4,050.

A-Z EquipmentRentals & Sales

480-695-0672

LOADERS

Backhoe Loaders

2008 Yanmar CBL40, PTO, 3pt. hitch, backhoe, loader buck-et attached w/ skid plate, Greatcondition........................CALL.

Vermeer of Iowa641-628-2000

New Holland U80C SkipLoader, 85 HP, 4WD, HydraulicGannon, Unit #73652, 514hours..........................$57,996.

A-Z Equipment Rentals & Sales

480-955-0672

Skid Steer Loaders

New Holland L218 Skid Steer,Foamed - Filled Tires, 60 HP,66'' bucket, Unit #53690, 955hours..........................$19,864.

A-Z Equipment Rentals & Sales

480-955-0672

2012 JCB 155, Wheeled SkidSteer, ROPS, Bucket, Excellentcondition, 16 hrs ........$26,000.

Diesel Machinery, Inc.605-336-0411

TELEHANDLERS

Telescopic Handlers

New Holland M428, 42' MaxHt., 8000 lbs. Max Cap, Unit#51850, Good condition, 1,085hours..........................$39,874.

A-Z EquipmentRentals & Sales

480-695-0672

TRACTORS

Agricultural Tractors

John Deere 3320 with 300CXLoader, Box Scraper sold sepa-rately, Unit #36396, Good con-dition, 620 hours........$19,948.

A-Z EquipmentRentals & Sales

480-695-0672

Classified Rates:30 Words or Less for $35.00. Each Additional Word is $1.16.For just an additional $20 your ad can be posted on

our online searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

CLASSIFIEDS

Page 97: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 97

GRADALL | LOOKING FOR GRADALLXL4100IICONTACT: RON | PHONE: 604 240-2068EMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS | WEARE LOOKING TO PURCHASE NEW ORUSED SERVICE, SHOP, PARTS, OPERA-TOR’S OR OTHER MANUALS FOREQUIPMENT OF ALL SORTS, BUT NOTINCLUDED TRUCKS AND VEHICLES.WE PREFER IN BULK, PERHAPS YOUHAVE COMPUTERIZED YOUR SERVICEOR PARTS OPERATION AND YOU HAVEBOOKS OR MANUALS YOU NOLONGER NEED, OR INVENTORIES YOUHAVE NOT SOLD. PERHAPS AS A DIS-CONTINUED PRODUCT LINE. WE WILLPURCHASE IN ANY USEABLE CONDI-TION IN ANY AMOUNT YOU HAVE. CONTACT: GRACE FRANCESPHONE: 2708492270EMAIL: [email protected]––––––––––––––––––––––––––––––––ROTARY CUTTER | JOHN DEERE MX6ROTARY CUTTERCONTACT: TOMMY GUNNPHONE: 704-692-4621EMAIL: [email protected]––––––––––––––––––––––––––––––––1978, 1979 OR 1980 CAT 966CCONTACT: BIYIPHONE: 770-912-9934EMAIL: [email protected]––––––––––––––––––––––––––––––––TRENCHER | WALK BEHINDCONTACT: JERRY KINCHPHONE: 3213021595EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING TO PURCHASE USED DRAW-BAR FOR JOHN DEERE TRACTORMODEL 850CONTACT: SC SCOTTPHONE: 315 882-6632EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED BULLDOZER 12 MONTHS |NEEDED BULLDOZERS 12 MONTHSUSA ONLY «CONTRACTORS« PLEASENOT ADVERTISED PLEASECONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––EXTEC BOGIE S5 | LOOKING FOR 3AXLE BOGIE FOR EXTEC S5CONTACT: JOEPHONE: 724-944-5569EMAIL: [email protected]––––––––––––––––––––––––––––––––2004 BOBCAT S130CONTACT: KHALID ALZAHRANIPHONE: 7574696199EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT D5M LGP | I NEED L & R TRACKFRAMESCONTACT: JOHN FLOODPHONE: 843-754-6887EMAIL: [email protected]––––––––––––––––––––––––––––––––

MACHINERY | NEED PARTS FOR A W-7CASE WHEEL LOADER: BACK LEFTSTEERING AXLE HOUSING AND PLANE-TARY GEAR.CONTACT: TIM BAGWELLPHONE: 334-735-2464FAX: 334-735-5402EMAIL:[email protected]––––––––––––––––––––––––––––––––GRADAL 10,000 CAPACITY |CONTACT: MIRIAM GARCIAFAX: 7608415414 EMAIL: [email protected]––––––––––––––––––––––––––––––––KUBOTACONTACT: ISMETEMAIL: [email protected]–––––––––––––––––––––––––––––––– ASPHALT SEALCOATING RIG | ISO ASEALCOATING TRUCK WITH NO LESSTHAN A 1000 GALLON TANK.CONTACT: STEVE HARRISPHONE: 940-447-7311EMAIL: [email protected]––––––––––––––––––––––––––––––––ASPHALT PLANT 150 TON PER DAY,PAVER, | ROAD CON MACHINERYUSED, ASPHALT PLANT, PAVER, VROLLER, TANDEM ROLLER, MOTORGRADER.CONTACT: ARIF AZEEMPHONE: 2819489127EMAIL: [email protected]––––––––––––––––––––––––––––––––SKID STEER | CAB HEAT AC BUCKETFORKSCONTACT: JIM POLINGOPHONE: 612-455-7135FAX: 6124557101EMAIL:[email protected]––––––––––––––––––––––––––––––––JOHN DEERE 330C | JOHN DEERE 330CLONG REACH. MUST HAVE: CLEANOUT BUCKET, LESS THAN 10K HOURS.EASTERN USA LOCATION.CONTACT: CHARLESPHONE: 678-758-0761EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING TO BUY | HITACHI EX EXCA-VATORS: EX120LC-1, 3, 5 EX200LC,EX220LC, EX400LC KOMATSU EXCAVA-TORS: PC120LC, PC200LC, PC220LC,PC300LC, PC400LC KOBELCO EXCAVA-TORS: SK120, SK200, SK220, SK300,SK400LC ( MITSUBISHI ENGINE ONLY.)CAT E120B, 311, 311B, 312, 312B, 320,320B, 320L KOMATSU D61PX-12 D41P-6D58P-1 KOMATSU WHEEL EXCAVA-TORS: PW160, PW200, PW220CONTACT: MARKEMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED BULLDOZER D7G D8K | NEEDBULLDOZER «USER« D7G AND D8KWITH RIPPER NEAR NEW HAMPSHIRE«FROM CONTRACTORS NOT ADVER-TISED ON INTERNET I NEED 3 EACHFAST UNDER 25000.00US EACH NOJUNKCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––

CONSTRUCTION MACHINES | ALLKINDSCONTACT: LIZYEMAIL:[email protected]––––––––––––––––––––––––––––––––CAT 657GS | LOOKING FOR CAT 657GS.CONTRACTOR OWNED.CONTACT: DALEPHONE: 360-551-9778EMAIL: [email protected]––––––––––––––––––––––––––––––––ECONOMICAL VEHICLE | VOLKSWAG-ON BUG ANY YEAR IS FINE. MUST BERUNNING.CONTACT: LORIANNE WARDPHONE: 6614459640EMAIL: [email protected]––––––––––––––––––––––––––––––––CONCRETE MIXERS | SMALL CON-CRETE MIXERCONTACT: BONNIE HERNANDEZPHONE: 786-360-1336BUCKET FOR621E NONE QTCONTACT: TOMPHONE: 320-250-4650EMAIL: [email protected]––––––––––––––––––––––––––––––––EMAIL: [email protected]––––––––––––––––––––––––––––––––EQUIPMENT MANUALS | WANTING TOBUY AG AND CONSTRUCTION MANU-ALS, PARTS OPERATOR AND SERVICEMANUALS. NEW OR USEDCONTACT: JOHN WHITNEYPHONE: 530-864-0771EMAIL: [email protected]––––––––––––––––––––––––––––––––NEED ONE CAT D6D WITH WINCH PRE-FER ANGLE BLADE BUT WILL DO IF NOWINCH. OFFERS CONSIDEREDCONTACT: ANDREWPHONE: 61411872600EMAIL:[email protected]––––––––––––––––––––––––––––––––EUCLID R25 /R35 OFF ROAD TRUCK | R25/35 IN GOOD OPERATING CONDITION.NORTHEAST LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT WHEEL LOADERS | WE NEED RUN-NING OR NON-RUNNING CAT WHEELLOADERS 910, 920, 930, 936 & 936E WENEED RUNNING OR NON-RUNNING CATWHEEL LOADERS 950, 950B, 950E,950F/F-II, 966C/E & 966F/F-II WE NEEDRUNNING OR NON-RUNNING CATWHEEL LOADERS 970F, 980C, 980F,988B & 972GCONTACT: RIZPHONE: 832-528-0786EMAIL: [email protected]––––––––––––––––––––––––––––––––I NEED A STEEL BODY DUMP TRAILERTO HAUL BROKEN CONCRETE ANDASPHALT.CONTACT: DENNIS GARBISPHONE: 202-437-7299FAX: 202-610-9151EMAIL:[email protected]––––––––––––––––––––––––––––––––

TATA XENON PICK UPCONTACT: BIJAY KUMARPHONE: 943-901-1391EMAIL: [email protected]––––––––––––––––––––––––––––––––PARTS | WE ARE LOOKING FOR THEFOLLOWING FOR A CAT 345BL II -AGS02182: REBUILT OR RECONDI-TIONED HYDRAULIC PUMP, REBUILTOR RECONDITIONED PILOT PUMP ANDFAIR TO GOOD TRACKSCONTACT: ROY FOLLICKPHONE: 519-686-1123EMAIL: [email protected]––––––––––––––––––––––––––––––––MOBILE CRANE OF 100 TONS TO 120TONS, LATEST YEAR: 2007CONTACT: JAVIER GARZONPHONE: 593995201551EMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR WHEEL LOADERS 916,926, 930, 950, 950B, 950E, 966D, 966E,966F, 966FII.CONTACT: NAQIB KHANPHONE: +92-333-3298751EMAIL: [email protected]––––––––––––––––––––––––––––––––SKIDSTEER 773 BOBTACH | BOBCAT773 OR EQUIVALENT BOB-TACH FORBUCKET, FORKS, ETC.CONTACT: JOHNPHONE: 484-213-1896EMAIL: [email protected]––––––––––––––––––––––––––––––––EUCLID R25/R35 OFF ROAD TRUCK |WORK READY, GOOD CONDITIONNORTHEAST LOCATION.CONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––NEW, USED OR SURPLUS STEEL PIPECONTACT: BRUCEPHONE: 661-325-0398FAX: 661-325-0269EMAIL: [email protected]––––––––––––––––––––––––––––––––

CONTRACTORS OFFERS ONLY, 950B,950E, 966E, 966D, 966F & 966F2 | WEALWAYS BUY FOR THE LISTED UNITSIF YOU HAVE ANY OF THEM PLEASECONTACT ME. THANK YOUCONTACT: AYYAZ ALLAMEMAIL: [email protected]––––––––––––––––––––––––––––––––CAT MANUAL WHEEL LOADERS CAT950, 926E, 936E, 950B, 950E, 966E,966D, 966F & 966F-2. I AM ALWAYSLOOKING FOR THE LISTED UNITS IFYOU HAVE ANY OF THEM PLEASE CONTACT ME. THANK YOUCONTACT: IKRAM KHANPHONE: +92-333-5555-360EMAIL: [email protected]––––––––––––––––––––––––––––––––AERIAL BOOM FORK LIFT | CRAWLERAERIAL BOOM LIFTCONTACT: ROBERTPHONE: 620-786-5152FAX: 620-793-5466EMAIL:[email protected]––––––––––––––––––––––––––––––––WACKER RT 820 REMOTE USED ORNEW, USACONTACT: KEVINPHONE: 856-692-0027EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A REPLACEMENTENGINE 2006 JD CT322CONTACT: TONYPHONE: 843-599-7308EMAIL: [email protected]––––––––––––––––––––––––––––––––BULLDOZER D8H DIRECT DRIVE |NEEDED BULLDOZER D8H «DIRECTDRIVE« A CLUTHCH FROM USER ORGENTLEMAN FARMER MUST BE GOODGOOD CHEAP NO JUNK I PAY THEMARKET UNDER UNDER?? THANKS INEED 3CONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU SERVICE MANUAL | SERVICEMANUAL FOR KOMATSU PC200LC-7FOR SERIAL NUMBER C50001 AND UPCONTACT: JOEPHONE: 724-944-5569EMAIL: [email protected]––––––––––––––––––––––––––––––––GUARDRAIL POST DRIVERCONTACT: RANDY NORIEGAPHONE: 626-260-4429FAX: 626-279-5510EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED A ENGINE HOOD FOR A 2001KOMATSU 228USLC-3 # 20441CONTACT: EDDIE GREENPHONE: 864-327-3909EMAIL: [email protected]––––––––––––––––––––––––––––––––

NEED CAT 988H WITH OR WITHOUTBLOCK HANDLER. I NEED COUNTERWEIGHT AND SHORT LIFT OR STAN-DARD LIFT AND IN AND AROUND$100,000CONTACT: HEMAN UDESHIPHONE: 917623970400EMAIL: [email protected]––––––––––––––––––––––––––––––––FLEET TRUCK OR VAN | I AM LOOKINGFOR A USED UTILITY WORK TRUCKWITH TOOL BOX, S & A RACK....95 TO05 ALL ON CONDITIONCONTACT: KENPHONE: 925-687-8831EMAIL: [email protected]––––––––––––––––––––––––––––––––BULLDOZER D50CONTACT: I KALYANKRSHNAPHONE: 900-011-0789EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT WHEEL LOADER950B/950E/966D/966E & 966F | WANT TOBUY CAT WHEEL LOADER 920, 930,936E, 950, 950B, 950E, 966D, 966E,966F-I, 980C, 980FCONTACT: AHMEDPHONE: 0092-333 2376638EMAIL: [email protected]––––––––––––––––––––––––––––––––LOW HOUR VALMET 385 MAXI HEADCONTACT: LEROY BROECKERPHONE: 810-280-8183EMAIL: [email protected]––––––––––––––––––––––––––––––––5BY16 3DECK INCLINEDOR HORZSCREEN | GOOD OPERATING CONDI-TION WITH MOTORCONTACT: JJ BRENNAN CONSTEMAIL:[email protected]––––––––––––––––––––––––––––––––NEED BULLDOZER D4G, D5G ENC CABOR ROPS LGP OR STANDARD NOTADVERTISED NO MACHINERY TRADERNO ROCK AND DIRT USER USA IF POS-SIBLE LOW HOURS I NEED 3 OR 4 FASTCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED RUNNING OR NON-RUNNING CATBACKHOE COMPACT | KUBOTA L39,L45. 0R JOHN DEERE 110CONTACT: RICKEMAIL: [email protected]––––––––––––––––––––––––––––––––KOBELCO 330 EXCAVATOR ENGINE |COMPLETE OR SHORT BLOCK ENGINEMODEL 6D16TLE2 FOR KOBELCO 330EXCAVATOR ENGINECONTACT: RICHARDPHONE: 732-489-3266FAX: 732-560-7313EMAIL: [email protected]––––––––––––––––––––––––––––––––CAB CAT 826H | WE ARE LOOKING FORA CAT 826H CAB FOR A LANDFILLCOMPACTOR.CONTACT: JOHN STEWARTPHONE: 519-686-1123EMAIL:[email protected]––––––––––––––––––––––––––––––––

Attention Contractors!Post Your Wanted To Buy Listings FREE!

Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:

www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted

Page 98: Midwest 22 2015

Page 98 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Unreserved public equipment auctions

27,500+ items in 105+ auctions including

rbauction.com

Special limited-time financing offer! No payments for 90 days*

Auctioneer John Korrey # 15943, Auctioneer Greg M. Highsmith # 13285, Auction Company License # 1981, Motor Vehicle Dealer License #1539, Auction Company License #AY00208L, Ritchie Bros. Auctioneers (America) Inc. Auction Clerk License #225, Auctioneer Gregory M. Highsmith # 701, Auction Company License # 001348, Auctioneer Gregory S. Fuqua #AU002665, Auctioneer Trevor J. Moravec # 16450, Used Motor Vehicle Dealer License #2647 Auction Company Bond #0470724, Auctioneer Patrick J. Hicks Bond # 0470727, Auctioneer Eddie R. Graham Bond # 0470726, Motor Vehicle Dealer License #DLR25867, Auctioneer Eddie R. Graham # 7014014, Auction Firm License #6980, Motor Vehicle Dealer License #0061711, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Auction Firm #2389, Auctioneer Eddie R. Graham #2237, Auction Company Bond #0470724, Auctioneer Trevor J. Moravec Bond # 0466225, Auctioneer John Korrey Bond # 0470729, Auctioneer Greg Highsmith Bond # 0470728, Auctioneer John Korrey Bond # 0470729, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865.*Limited-time offer from Ritchie Bros. Financial Services. OAC. Terms & conditions apply. See rbauction.com/financing.

ed-time finl limitaiSpec

Unr

ing offanced-time fin

lic equipment auctionsbued pvved pserrverr

mentyaer! No p off ffer! No p

lic equipment auctions

syaor 90 ds f for 90 dment *

lic equipment auctions

5 Dy1sed – 20Unu

ac CA2500Dapn5 Dy

oVVo12 3 – 20

tsath Eo A40F 6x6 | Norlvo

14 20

tsath Eo L90G | NorlvoVVo14

Nor

tsath ENor

20DIT 4x4 | Norar 4llerpiat2006 C

tsath E20DIT 4x4 | Norsed – 20Unu

ar 311FLRRllerpiat5 C1sed – 20tsath ENor

llerpiat5 C1sed – 201 of 2 – Unutsath ENor

ar 906H2e 700K hn Deer13 Jo20

ontsT | HouXLLT | Houe 700K

4J | Hou2e 6hn Deer7 Jo200

ems in 105+ auctions inc7,500+ it2t, MDsath ENorXT,ol PasE

Noon, TXtsHou

onts4J | Hou 13 V20

ludingems in 105+ auctions inc 27Octv 4oN

11–12vNo

a, GAantAtlth, TXorWtorrtF

itye C LakSalt

anek| SpoC220DL Eo lvo V Vo

luding 1Dec

2–3Decth, TX 7Dec, UTity

NaTiptSt

anekSpolion A550 | aG

DecTN le, livhsNaDecon, CATiptDecs, MOoui. LSt

ane hn Deer3 of 5 – Jo

5 15 1

16

or son perin Bid idm bNo minimu▸

pect and insttseTTe▸

xe 310G | Phoenihn Deer

lineonsee pricvsere or rsid

eits on-pect

Noon, TXtsHouAane, WkSpoAgh, P PArubPitts

x, AZPhoenion, NDtsliliW

s, NVaegaVsLa

g M. HighsmiteGrerionectAuey # 15943, orr John KerionectAu License #225, erklCion ctAu. a) Inc (AmericserionectAu. sorhie BitcR

ale DelehicVorotsed M # 16450, Uvecaor J. MorevrTerionectAuR25867, License #DLerale DelehicVorotam Bond # 0470726, MahGr

g M. HighsmiteGrerionectAuion Firm License # 444.000193, ctAuey Bond # 0470729, orr John KerionectAu Bond # 0466225, vecaor J. MorevrT

h # 441.000865.g M. HighsmiteGrerionectAu444.000193, C. A. OicesvvSeralianc. Finsorhie Bitcom Rfrerfime of*Limited-t

11–12vNo13vNo7 1vv 1No

18vv 18No 19vv 19No 20vv 20No

itye C LakSalt, CAoamentrSac

O, CervDens, MNliapoMinne

am, NCrhaleigh-DuR, ILoaghicC

License #1539, erale DelehicVVehicoroty License # 1981, MompanCion ctAuh # 13285, g M. Highsmity License # 001348, ompanCion ctAuh # 701, ory M. HighsmitgeGrerionectAu License #225,

atric PerionectAuy Bond #0470724, ompanCion ctAu License #2647 eralion Firm License #6980, MctAuam # 7014014, ahGrdie R. EderionectAuR25867,

am #2237, ahGrdie R. EderionectAuion Firm #2389, ctAuh # 441.000865, g M. HighsmiterionectAuh Bond # 0470728, g HighsmiteGrerionectAuey Bond # 0470729,

g.inancom/finion.ccte rbauSe. plyy. apionsondit & cermsT

7Dec, UTity 8Dec, CA 9Dec 9Decs, MN

10Decam, NC 11Dec

StLFinUp tno money

Y00208L,y License #A AY00208L,ompanCion ctAu License #1539, U002665,uqua #A. FSory geGrerionectAuy License # 001348,

die R. EderionectAu Bond # 0470727, sk J. Hickatric License #0061711,erale DelehicVorotion Firm License #6980, M

erionectAuy Bond #0470724, ompanCion ctAuam #2237, ion Firm License #ctAuey Bond # 0470729, orr John Ker

& auction l luffuSee

Decs, MOoui. LStDecs, CAele AngsoL

balaivaing sale& ing ancFinithing, wanco 100% finUp t

wn. dono money y do

ats tinggs sliequipment &

16 18leb

pect and instt and insseTTe▸buo the pOpen t▸

added ems ite Morling: sel aboutlalC

omauction.crb

eits on-pectationrrationtsegiee rrlic, fb

lyaidadded 31.39811.800.2

Page 99: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 99

Absolute public equipment auction

See complete listings at rbauction.com

November 4 (Wednesday) 9 amYoungstown, OH Equipment includesExcavators, crawler tractors, wheel loaders, rock trucks, cranes, compactors, trucks, trailers, forklifts, boom lifts & much moreFinancing & leasing availableUp to 100% financing, with no money down.

Bid in person or online▸ No minimum bids or reserve prices▸ Test and inspect on-site▸ Open to the public, free registration

Location2100 Poland Avenue, Youngstown, OhioMore items added dailyCall about selling: 234.201.9994

Caterpillar D8R

Grove RT990 90 Ton 4x4

1 of 6 – Komatsu PC1100-6

1 of 4 – Caterpillar 950G

2 of 3 – 2006 Caterpillar 345CLVG

1 of 7 – Peterbilt 357 & 1 of 15 – Bobko SPFS27 50 Ton Off Highway

Auction Firm #2008000166 / Auctioneer Frederick R. Vilsmeier #2004000137

Featuring equipment from Allied Erecting & Dismantling Co, Inc.

Page 100: Midwest 22 2015

Page 100 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERSwww.lyonauction.com315-633-2944�

• Plymouth, MASat., October 24, 2015For: Large Snow Equipment Auction

• Houston, TXThurs., October 29, 2015For: Major Job Completion Auction

• Manchester, NHSat., October 31, 2015For: Major Job FinishingConstruction Equipment & more

• Norwich, NYSat., October 31, 2015For: Aggregate ConstructionEquipment, Trucks & more

• Somerset, PASat., November 7, 2015For: Semi-Retirement Auction –Construction Equipment

• Somerset, PASat., November 7, 2015For: Beautiful Car Collection from1950’s – 1990’s

• Houston, TXTues., November 10, 2015For: Rental Fleet ConstructionEquipment & more

• Minneapolis, MNThurs., November 12, 2015For: Rental Fleet ConstructionEquipment & more

• Racine, WISat., November 14, 2015For: Rental Return Auction

• Sacramento, CASat., November 14, 2015For: Late Model Rental Fleet

• Syracuse, NYSun., November 15, 2015For: Estate Sale

• New Martinsville, WVFri., November 20, 2015For: Job Completion Auction

• Syracuse, NYSat., November 21, 2015For: Late Model Rental FleetConstruction Equipment & more

• Riverside, CASat., November 21, 2015For: Rentals! Lite Construction &more

• Hudson (Buffalo), MASun., November 22, 2015For: Complete Collection of Toys,License Plate, Collectible Trucks &more

• Toronto, Ontario, CanadaMon., November 23, 2015For: Very, Very Large Late ModelJD Agricultural Tractors & more

• New York, NYSat., December 5, 2015For: Large Late Model Construction& Aggregate Equipment & more

• Portland, ORThurs., December 10, 2015For: Construction Equipment &more

• Buffalo, NYSat., December 12, 2015For: Late Model ConstructionEquipment

• Sacramento, CASat., December 12, 2015For: Late Model Rental FleetConstruction Equipment

• Atlantic City, NJSat., December 19, 2015For: Rental Fleet ConstructionEquipment & more

• Riverside, CASat., December 19, 2015For: Rentals! Lite Construction &more

• Albany (Greenwich), NYTues., December 29, 2015

For: Large Rental Fleet Auction

• Hagerstown, MDWed., December 30, 2015For: Late Model ConstructionEquipment

• Kissimmee, FLJanuary 30 – February 7, 2016For: 23rd Annual Rental ReturnAuction

RITCHIE BROS. AUCTIONEERSwww.rbauction.com402-421-2631

• Nanaimo, BCOctober 26, 2015

• Edmonton, ABOctober 27-29, 2015

• North East, MDOctober 27, 2015

• El Paso, TXNovember 4, 2015

• Youngstown, OHNovember 4, 2015

• Houston, TXNovember 11-12, 2015

• Spokane, WANovember 13, 2015

• Pittsburgh, PANovember 17, 2015

• Phoenix, AZNovember 18, 2015

• Williston, NDNovember 19, 2015

• Price George, BCNovember 19, 2015

• Las Vegas, NVNovember 20, 2015

• Atlanta, GADecember 1, 2015

• Cortez, CODecember 1, 2015

• Fort Worth, TXDecember 2-3, 2015

• Columbus, OHDecember 3, 2015

• Omaha, NEDecember 4, 2015

• Salt Lake City, UTDecember 7, 2015

• Sacramento, CADecember 8, 2015

• Manchester, NHDecember 8, 2015

• Minneapolis, MNDecember 9, 2015

• Denver, CODecember 9, 2015

• Raleigh-Durham, NCDecember 10, 2015

• Chicago, ILDecember 11, 2015

• Nashville, TNDecember 15, 2015

• Tipton, CADecember 15, 2015

• St. Louis, MODecember 16, 2015

• Los Angeles, CADecember 18, 2015

• Orlando, FLFebruary 15-19, 2016

AERO AUCTIONSwww.aeroauctions.ca866-375-6109�

• ONLINE ONLYFri., October 30, 2015For: Recreational Auction

• ONLINE ONLYWed., November 4, 2015For: National Agriculture Auction

• Ottawa, OntarioThurs., November 12, 2015For: Industrial Live & Online

• Montreal, QuebecTues., December 1, 2015For: Industrial Live & Online

• Edmonton, AlbertaTues., December 15, 2015For: Industrial Live & Online

• Barrie, OntarioThurs., December 17, 2015For: Industrial Live & Online

BIDADOO AUCTIONSwww.bidadoo.com1-877-BIDADOO�

• ONLINE ONLYOctober 22 - 29, 2015For: Construction Auction

• ONLINE ONLYOctober 29 – November 5, 2015For: Construction Auction

• ONLINE ONLYNovember 5 - 12, 2015For: Construction Auction

• ONLINE ONLYNovember 12-19, 2015For: Construction Auction

• ONLINE ONLYNovember 19-23, 2015For: Construction Auction

• ONLINE ONLYDecember 3-10, 2015For: Construction Auction

BIG IRONwww.bigiron.com800-937-3558�

• ONLINE ONLYOctober 28, 2015

• ONLINE ONLYNovember 4, 2015

• ONLINE ONLYNovember 11, 2015

• ONLINE ONLYNovember 18, 2015

• ONLINE ONLYNovember 25, 2015

CINCINNATI INDUSTRIAL AUCTIONEERSwww.cia-auction.com�513-241-9701

• Jackson, NJWed., October 28, 2015For: Public Auction

• Mentor, OHThurs., November 5, 2015For: Public Auction

DON SMOCK AUCTION CO., INC.www.dsa-auctions.com765-778-9277

• Pendleton, INFri., December 11, 2015For: 23rd Annual Snowball Auction

EQUIFY AUCTIONS, LLCwww.equifyauctions.com888-535-8218

• Sealy, TXNovember 12-13, 2015For: Heavy Machinery & EquipmentAuction

HENDERSON AUCTIONSwww.hendersonauctions.com225-686-2252

• Carencro, LANovember 4-5, 2015For: 2 Day Fall Contractor’s Auction

HILCO INDUSTRIAL, LLCwww.hilcoind.com�877-37-HILCO

• ONLINE ONLYSept. 21 – Oct.31, 2015For: Late Model, Single OwnerHeavy Haul Fleet

HOUGHTON’S AUCTION SERVICEwww.houghtonauctions.com651-764-4285

• Almena, WIThurs., October 29, 2015For: Large Retirement Auction

HUNYADY AUCTION COMPANYwww.hunyady.com�800-233-6898

• Tamaqua, PAThurs., November 12, 2015For: South Tamaqua Coal Pockets,Inc. Complete Liquidation

I.R.A.Y. AUCTIONwww.iraymn.com�320-968-7230

• Foley, MNFri., December 4, 2015For: Heavy Equipment

IronPlanet AUCTIONSwww.IronPlanet.com888-433-5426

• Wilkes-Barre/Scranton, PATues., October 27, 2015For: Unreserved Public Auction

• Houston, TXTues., November 10, 2015For: Unreserved Public Auction

• Las Vegas, NVFri., December 11, 2015For: Unreserved Public Auction

• Orlando, FLFebruary 9 – 12, 2016For: Unreserved Public Auction

JAMES G. MURPHY INC. AUCTIONEERSwww.murphyauction.com�800-426-3008

• Tacoma, WANovember 4 - 5, 2015For: Interfor Tacoma DivisionSawmill

• Shelton, WADecember 1 - 2, 2015For: Public Auction: The FormerSimpson Mills

• Kenmore, WASat., December 5, 2015For: Heavy Equipment &Contractors Auction

• Pearl City, HIWed., December 9, 2015For: Heavy Equipment &Contractors Auction

JEFF MARTIN AUCTIONEERS, INC.www.jeffmartinauctioneers.com�601-450-6200

• ONLINE ONLYOct. 28 - November 4, 2015For: PACA Members Fall SurplusOnline Public Auction

• Brooklyn, MSNovember 6 - 7, 2015For: Fall Public Auction

LLOYD MEEKINS & SONS AUCTION COMPANYwww.meekinsauction.com�800-499-6560

• Lumberton, NCTues., December 29, 2015For: 21st Annual Construction,Truck & Farm Auction

MARTIN & MARTIN AUCTIONEERS, INC.www.mmaauction.com864-947-7888

• Whitsett, NCWed., October 28, 2015For: One Owner Absolute JobCompletion Auction

• Pelzer, SCTues., December 8, 2015For: Public Equipment & TruckAuction

MOTLEY’S AUCTION GROUPwww.motleys.com�804-232-3300

• Gastonia, NCSat., October 24, 2015For: Utility Equipment & Trucks

• Elizabeth City, NCTues., October 27, 2015For: Construction Equipment &more

• Richmond, VATues., November 10, 2015For: Railroad & ConstructionEquipment

NITKE AUCTIONSwww.nitkeauctions.com�715-693-4447

• Wausau, WIOctober 30-31, 2015For: Fall Wisconsin ContractorsAuction

PETROWSKY AUCTIONEERS INC.www.petrowskyauctioneers.com�860-642-4200

• Lowell, MAFri., November 6, 2015For: 1 Owner Complete DispersalAuction

• Elizabeth, NJThurs., November 12, 2015For: Major Public EquipmentAuction

PURPLE WAVE AUCTIONwww.purplewave.com�866-608-9283

• ONLINE ONLYTues., October 27, 2015For: Kansas Department ofTransportation Auction

• ONLINE ONLYThurs., November 5, 2015For: Construction Equipment

• ONLINE ONLYTues., November 17, 2015For: Truck & Trailer Auction

• ONLINE ONLYThurs., November 19, 2015For: Construction Equipment

QUANTOS AUCTIONS

www.quantosauctions.com

253-236-8555

• Vallejo, CA

Thurs., November 19, 2015For: Late Model ConstructionEquipment

RITCHASON AUCTIONEERS INC.

www.ritchason.com

�800-806-3395

• Lebanon, TN

Sat., December 12, 2015For: Construction Equipment

ROLLER AUCTIONEERS

www.rollerauction.com

�866-515-1668

• Denver, CO

Wed., November 11, 2015For: Heavy Construction &Contracting Equipment

RTI AUCTIONS

www.teitsworth.com

�585-243-1563

• Syracuse, NY

Sat., October 24, 2015For: Municipal & ContractorEquipment Auction

SHETRON AUCTIONS

www.shetronequipment.com

717-532-8828

• Shippensburg, PA

Fri., October 30, 2015For: Construction & EquipmentConsignment Auction

• Shippensburg, PA

Fri., December 18, 2015For: Construction & EquipmentConsignment Auction

STEFFES GROUP INC.

www.steffesgroup.com

�701-237-9173

• NOVEMBER ONLINE

November 4 - 11, 2015For: Ag, Construction, Trucks &more

WAYNE PIKE AUCTION COMPANY

www.waynepikeauction.com

763-389-2700

• Princeton, MN

Sat., December 5, 2015For: Heavy Equipment

WSM AUCTIONEERS

www.wsmauctioneers.com

�623-936-3300

• Phoenix, AZ

Sat., November 14, 2015For: Construction Equipment, Trucks& more

YODER & FREY

AUCTIONEERS, INC.

www.yoderandfrey.com

�419-865-3990

• Kissimmee, FL

February 8-15, 2016For: 42nd Annual 7 Day Auction

AuctionsComingTo view information on upcoming auctions visit our

Auction Calendar at www.constructionequipmentguide.com

Page 101: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 101

Secured Party Sale

MENTOR EQUIPMENT RENTAL, LLC – MULTIPLE LOCATIONS Auction Location: 8653 East Avenue, Mentor, Ohio 44060

(25 Miles East of Downtown Cleveland, Ohio)

cia-auction

DRILL RIGS•

TRAILERS•

THURSDAY, NOVEMBER 5TH AT 12:00 P.M. NOON ESTSUPPORT EQUIPMENT•

INSPECTION:

E PIUQR EOTNEMMoitcuA(

y Strad PercueS

L, LLATTANET RNEMPnet Avsa3 E56: 8noitacon Lo

n wwn Contowwntof Dt osas E Eaeliil5 M2((2

e lay S

OE LLPITLLTUC – ML0604o 4hi, Orotne, Meun

)oo)ih, Odd, Onallaeveln C

S NOITACO

:NOITECPSNI vo N,yasdenedWL. (M.0 P0:o 4. tM.0 A0:m 8orf

t –nemtnioppy Ar bo74-31e 5mon Rhot JcatnoC

g

th 4rebmev)emil TacoL

t –7046-77

y

.www a aic

niotcua mo.c

ARTBA Recognizes 2015 AwardWinners at National ConventionThe American Road & Transportation

Builders Association (ARTBA) recognizedtransportation design and constructionindustry leaders Sept. 30 with divisionawards during the association’s NationalConvention, held in Philadelphia. ARTBAannounced the following honorees:

Nello L. Teer Jr.: John R. Kulka, con-sultant, HRI Inc., in State College, Pa.Created in 1988 as a tribute to contractorand Past ARTBA Chairman (1959-61)Nello L. Teer Jr., it annually honors a con-tractor member who has made outstandingcontributions to the association’s contractorsdivision and the transportation constructionindustry.

Guy Kelcey: Richard P. Markwith,vice president, TranSystems,Atlanta. Thisaward, which honors Guy Kelcey, one ofthe planning and design (P&D) division’sorganizers, is given each year to an ARTBAmember who has exhibited a high degree ofservice to the association’s P&D division.

Paul F. Phelan Memorial: WallyMoore, global group director, TenCateGeosynthetics, Pendergrass, Ga.Established in 1971, it is given annually inrecognition of outstanding contributions tothe ARTBA materials and services divisionand the transportation construction industry.

John “Jake” Landen MemorialHighway Safety: Joe Toole (public sector),former associate administrator in theFederal Highway Administration’s office ofsafety in Washington; and Taylor Bowlden(private sector), retired government affairsmanager at 3M’s Traffic Safety & SecurityDivision, also in Washington. Established in1989 in memory of Traffic Safety IndustryDivision leader and Past ARTBA Chairman(1976) J.C. Landen, this annual award rec-ognizes outstanding contributions to high-way safety.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

www.constructionequipmentguide.com

Page 102: Midwest 22 2015

Page 102 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 103: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 103

California Auction Company Bond #70259785. ©1999-2015 IronPlanet, Inc. All rights reserved. IronPlanet IronClad Assurance and Auctions You Can Trust are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.

12/11/2015 Hosted by Cashman

2/9-2/12/2016 Hosted by Ring Power

EXCAVATORS WHEEL LOADERS MOTOR GRADERS OFF-ROAD TRUCKS & MORE

Bid onsite or online at www.IronPlanet.com |

UNRESERVED PUBLIC AUCTION

For more information call (866) 954-0397 or visit us online at IronPlanet.com

Mustang Cat 11704 Trickey RdHouston, TX 77067

AUCTION LOCATION

ORS WHEEL LTAATVVACAAVEX

TED BSHO

OORS WHEEL L

YTED B

OR GRADERS OFF-ROTADERS MOO

OR GRADERS O

AD TRUCKOR GRADERS OFF-RO

t tang Cay Rerick04 T

on, TX 77tHous

Mus17

S & MOREAD TRUCK

t dy R

706on, TX 77

Las V

UPC

: egas, NVLas Vy Cashmaned btHos

OMING UNRESERUPC

: 15 2011/12/y Cashman

VED PUBLIC AOMING UNRESER

, FL: Orlandoy Ring Ped btHos

VED PUBLIC A

16 2012/9-2/2/erwoy Ring P

UCTIONSVED PUBLIC A

16

UCTIONS

e infor morF

y Cashmaned bHos

BUY WITH CALL ITEMS ARE INSPECTED

tion call (866) 9ormae inf

y Cashman

ONFIDENCE!BUY WITH CALL ITEMS ARE INSPECTED

354-0tion call (866) 9

y Ring Ped bHos

ONFIDENCE!ALL ITEMS ARE INSPECTED

7 or visit us online a93

eroy Ring P

onPlanet.t Ir7 or visit us online a

omconPlanet.

nia Auction Company Bond #70259785. ©1999-2015 IrCalifored service marks of Iregistere rrust arou Can TYYou Can T

Cat Auction Services, An

ALL ITEMS ARE INSPECTED ARANTEEDAND GU

onPlanet, Inc. All rights rnia Auction Company Bond #70259785. ©1999-2015 IronPlanet, Inc. All other marks and brands ared service marks of Ir

Cat Auction Services, An onPlanetIr

ALL ITEMS ARE INSPECTED .ARANTEED

onPlanet Ireserved. IronPlanet, Inc. All rights roperty of their re the pronPlanet, Inc. All other marks and brands ar

onPlanet Marketplace

ALL ITEMS ARE INSPECTED

onClad Assurance and AuctionsonPlanet Irespective owners.operty of their r

Marketplace

Page 104: Midwest 22 2015

Page 104 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Chevron Debuts ISOCLEAN Certified Lubricants, ServicesChevron Products Company, a

Chevron U.S.A. Inc. division,announced the launch of its ISO-CLEAN Program, a first of its kindnational program that offers a solu-tion to particle contaminationthrough products and in-plant serv-ices designed to assist customers inmaximizing the life of their equip-ment by meeting stringent qualitycontrol standards set by originalequipment manufacturers (OEMs).Chevron’s ISOCLEAN pro-

gram includes ISOCLEAN certi-fied lubricants, which have beencertified to meet the fluid ISOcleanliness requirements of OEMs,and ISOCLEAN services, whichare in-plant services designed toclean up and manage contamina-tion of in-service lubricants andoperating systems. Both offeringsare dependent on each other andhelp to reduce wear, decreaseunscheduled downtime and extendthe life of equipment.Chevron’s ISOCLEAN certified

lubricants meet a specific ISOcleanliness code at the point ofdelivery, which represents the most

stringent cleanliness standards andspecifications for lubricants placedin equipment that are required byseveral leading OEMs. An impor-tant first step in controlling lubri-cant contamination is starting witha certified lubricant. These prod-ucts help reduce the expense andmanpower required by end cus-tomers to pre-filter non-certifiedlubricants to meet OEM require-ments.ISOCLEAN services are per-

formed by a national certified net-work of service providers at theplant location. Controlling particlecontamination for in-serviceequipment is another critical ele-ment in maintaining efficient oper-ation. The portfolio of services per-formed may include:• Fluid purification and dehydra-

tion• Varnish removal and mitiga-

tion• High velocity flushing• Reservoir and tank cleaning• Condition monitoring and sys-

tem audits• Fluid handling consultation

Chevron began rolling out itsISOCLEAN program in early2015 and has developed a nationalnetwork of ISOCLEAN certifiedlubricant marketers. The programhas seen such dramatic success thatit will begin to expand internation-ally in 2016. The company’s goalis to significantly increase thenumber of certified marketersthroughout many regions.“No other company is as dedi-

cated to providing solutions forlubricant particle contamination asChevron,” said Doug Hinzie, VPAmericas Lubricants at Chevron.“Our ISOCLEAN program withcertified lubricants and services isproof that we are investing heavilyin this crucial industry need. Inresponse to the request for aturnkey solution from customersand OEMs, we developed thiscomprehensive national programbecause we know how important itis to provide a consistent solutionwhich is certified and backed byChevron, and delivered whereverour customers need it.”The number one cause of lubri-

cant-related failures in equipmentis contaminant particles — most ofwhich are so small that they areunable to be seen by the naked eye.Controlling fluid contaminationearly in the process can significant-ly reduce the costs to remove itlater, which is a direct saving thatgoes to the bottom line of cus-tomers, the company said.“It doesn’t matter if you are in

mining, construction or own a fleetof trash trucks, it is all about lubri-cants and high pressure lubricants— the cleaner that oil is the longerit is going to last, because down-time is a killer,” said FreddieDodge, expert miner and star of“Gold Rush” on the DiscoveryChannel. “You get peace of mindwith ISOCLEAN lubricant systembecause every gallon you use youget a certificate that it is free ofharmful contaminants.”Chevron offers more than 50

ISOCLEAN certified lubricantsfor critical equipment componentsfrom hydraulics to gear oils to syn-thetics for a variety of industries:agriculture, construction, manufac-

turing, mining, petrochemicalrefining, power generation, andwaste hauling. ISOCLEAN certi-fied lubricants give customers theopportunity to significantly maxi-mize equipment component life:by 2 to 4 times in most cases.These lubricants have under-

gone one of the most rigorous test-ing processes in the industry to ver-ify that the lubricants performanceis not compromised, which isexclusively done at the ChevronResearch and Technology Center.All products delivered by ISO-CLEAN certified lubricant mar-keters meet the required certifica-tion process, which includes multi-ple tests, and follows stringentdelivery processes to verify that theproducts meet specification oneach delivery.For more information, visit

www.chevronisoclean.com.(This story also can be found on

Construction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

To view our Business Calendar online,

go to www.constructionequipmentguide.com.

American Oil & Gas Events/Conferences 2015Toll Free: 800/847-8301 or 316/788-62712015 CALENDAR OF EVENTS:October 25-27

DUG Eagle Ford Conference & Exhibition, Henry B. GonazlezConvention Center, San Antonio. (713) 260-6400

October 26LAGCOE Open Golf Tournament, Oakbourne Country Club,Lafayette, LA LOGA, (800) 443-1433

October 27-29Louisiana Gulf Coast Oil Exposition, Cajundome & ConventionCenter, Lafayette, LA (337) 235-4055

October 29-30Second Annual Tight Oil Water Management Summit, MarriottCity Center, Denver (800) 721-3915

October 30-November 119th International Petroleum Environmental Conference, GrandHyatt Downtown Hotel, Denver. University of Tulsa, (918) 631-3088

November 1-4Geological Society of American Annual Meeting, Baltimore,(918) 497-5500

November 4-5Texas Alliance Board of Directors Meeting, Downtown Hilton, Fort Worth, (940)723-4131

November 4-6International Association of Drilling Contractors Annual Meeting,Hyatt Regency Riverwalk, San Antonio, (713) 292-1945

November 9-10Independent Petroleum Association of America Annual Meeting,The Ritz-Carlton, New Orleans, 800/433-2851

November 9-10Executive Oil Conference, Midland County Horseshoe, Midland,713/260-6400

November 12Houston Wildcatters, Houston Petroleum Club, Texas Alliance,940/723-4131

November 18IPAA/TIPRO Leaders in Industry Luncheon, Petroleum Club of Houston, 832/233-5502

November 19PBPA Monthly Luncheon, Midland Petroleum Club, 432/684-6345

December 1-2Oil & Gas Environmental Conference, The Fairmont Dallas.University of Texas at Arlington, (866) 906-9190

December 3Texas Alliance Graham Membership Meeting, Graham, TX,Country Club (940) 723-4131

December 9IPAA/TIPRO Leaders in Industry Luncheon, Petroleum Club of Houston (832) 233-5502

December 9Eighth Annual PAW Reclamation Conference, Casper, WY(307) 234-5333

December 9-10NAPE Denver, Colorado Convention Center, Denver (817) 847-7700

PIOGA (Pennsylvania Independent Oil & Gas Association) Eastern Oil & Gas Conference & Trade ShowDATES: OCTOBER 27 – 28, 2015 PLACE: Monroeville Convention Center in Monroeville, PAThe time of year is new, but the venue will be familiar to most of ourexhibitors. The Monroeville Convention Center has lots to offer: a con-venient location, free parking, a good layout and reasonable lodging costs.We’re even rolling back our booth prices to 2013 levels! We hope you willtake the opportunity to again participate in the region’s longest-runningtrade show organized by the exploration and production industry for theE&P industry. For more information, contact The Pennsylvania Independent Oil and GasAssociation, 115 VIP Drive, Suite 210, Northridge Office Plaza II, Wexford,PA 15090-7906. PHONE (724) 933-7306; FAX (724) 933-7310.

OSHA for Oil and Gas: Regulations, Auditing and EnforcementDATE: OCTOBER 29, 2015PLACE: Houston, Texas In OSHA for Oil and Gas, we review safety auditing best practices, employ-ee and contractor safety as well as the Occupational Safety and HealthAct’s (OSHA’s) regulations and enforcement initiatives. There is a series ofrulemaking proceedings currently underway (e.g., silica, electronic record-keeping, and reporting) as well as soon-expected rulemaking (e.g., fallprotection, clarification of recordkeeping retention requirements, and com-bustible dust) and RFIs that potentially affect the industry (e.g., processsafety management). There are also a number of OSHA initiatives outsideof the rulemaking context, such as National Emphasis Programs andAwareness Campaigns. Given the high risk of oil and gas work, the diver-sity of projects, the remote nature of the operations, and the fact that manyemployees and supervisors are new to this industry, there is a critical needto expand safety auditing to ensure best practices across all sectors of thesupply chain, from upstream drillers, well servicing teams, and track crewsat the well site to pipeline construction crews and operators and refineryworkers. The goal of this course is to provide guidance to oil and gasindustry, with an emphasis on health and safety regulations, compliance,and enforcement trends. This Course is Useful For:. Project managers. HSE professionals. Regulatory professionals. Individuals new to oil and gas regulatory investigations & OSHA. Energy lawyers. Oil & gas engineers

. In-house counsel

. Risk managersFor more information on this course, contact Kinetic at (720) 491-1173; Website: http://becomekinetic.com. Email: [email protected].

The Associated General Contractors of America OAIMA (Ohio Aggregates & Industrial Minerals Association) OAIMA ANNUAL MEETING on NOVEMBER 12 & 13, 2015COLUMBUS HILTON AT EASTONCOLUMBUS, OHIO5th Annual Design & Construction Technology Conference – What startedwith a focus on Building Information Modeling has grown into an eventspanning the use of technology in design and construction. ConferenceSchedule includes: Registration/Continental Breakfast/Networking;Welcome – Introductions; Keynote Presentation; Networking/Expo;Education Sessions (AIA and PDH Credits Available for All EducationSessions); Lunch – Networking/Expo; Education Sessions;Networking/Expo; Education Sessions; Networking/Expo; EducationSessions; Reception. Lab Sessions include: Navisworks ManageEssentials – Clash Detection Made Easy; Bluebeam: The Force Awakens;Revit Trouble Resolved. Registration Fee: Early Bird $75.00 per personafter October 16, 2015 fee is $100.00 (includes continental breakfast,lunch & reception). For more information on this event, contact AGC of MOby telephone: 314/781-2356 or Fax: 314/781-2874.

OAIMA (Ohio Aggregates & Industrial Minerals Association) OAIMA ANNUAL MEETING on NOVEMBER 12 & 13, 2015COLUMBUS HILTON AT EASTONCOLUMBUS, OHIOThe Ohio Aggregates & Industrial Minerals Association is the trade associ-ation in Ohio that represents all of the state’s mining operations, exceptcoal. These commodities include mostly construction materials, both nat-ural and manmade, such as aggregates (which are sand, gravel, slag,and crushed limestone, dolomite, and sandstone), salt clay, shale, gyp-sum, industrial sand, building stone, lime, cement and recycled concrete.For more information, contact Ohio Aggregates & Industrial MineralsAssociation , 162 N. Hamilton Road, Gahanna, OH 43230. Toll FREE:1-800-OH-ROCKS (647-6257); Phone: 614/428-7954; Fax: 614/428-7919; Email: [email protected].

TCI EXPO 2015, hosted by the TREE CARE INDUSTRY ASSOCIATION(TCIA) DATE: NOVEMBER 12-14, 2015PLACE: David L. Lawrence Convention Center,

Pittsburgh, PAWebsite: http://expo2015.tcia.org/TCI Expo 2015 World’s Largest Tree Care Show & Conference since 1990. November 12-14, 2015 Pittsburgh, PAPre-Conference is Wednesday, November 11, 2015. Contact: Tree Care Industry Association

136 Harvey Road, Londonderry, NH 03053 Toll Free: (800) [email protected]

AGC MO (The Associated General Contractors of America)CONTACT US: AGC of Missouri

6330 Knox Industrial DriveSuite 200St. Louis, Missouri 63139

Phone: 314/781-2356Fax: 314/781-2874AGC MO UPCOMING EVENTS:Focus Four Class (O-4)When: October 26 – 28, 2015Where: Construction Training School, Saint Louis, MOBIM Unit 3: Contract Negotiation and Risk AllocationWhen: October 28, 2015Where: Construction Training School, Saint Louis, MO 1st Aid/CPR Part 1 (N-1)When: November 4, 2015 Time: 4:00 PM to 8:30 PM (CT)Where: Construction Training School, Saint Louis, MO 5th Annual Design & Construction Technology ConferenceWhen: November 5, 2015Time: 7:30 AM to 7:00 PM (CT)Where: Orlando’s Event & Conference Center, Maryland Heights, MOB.Path’s /AED – Part 2 (N-2)When: November 12, 2015Time: 4:00 PM to 8:30 PM (CT)Where: Construction Training School, Saint Louis, MOConstruction Awards GalaWhen: November 12, 2015Time: 5:30 PM to 9:30 PM (CT) Where: River City Casino & HotelNEW Confined Space/Excavation (N-3)When: November 16 – 18, 2015Where: Construction Training School, Saint Louis, MOGHS – Minimum Requirements (N-4)When: November 23, 2015Where: Construction Training School, Saint Louis, MO1st Aid / CPR Part 1 (D-1)When: December 2, 2015Time: 4:00 PM to 8:30 PM (CT)Where: Construction Training School, Saint Louis, MOBIM Unit 4: Process, Adoption, and IntegrationWhen: December 9, 2015Where: Construction Training School, Saint Louis, MOB.Path’s/AED – Part 2 (D-2)When: December 9, 2015Time: 4:00 PM – 8:30 PM (CT) Where: Construction Training School, Saint Louis, MOOSHA 10-Hour Course (D-3)When: December 14 – 16, 2015Where: Construction Training School, Saint Louis, MO Project Manager Development Program – Module 1When: January 5, 2016 – February 23, 2016Where: Construction Training School, Saint Louis, MO

BusinessCalendar

Page 105: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 105

O’Hare Project Calls for Common, Speciality Equipment It is the fifth east-west parallel

runway at O’Hare and the fourthnew runway component openedsince 2008 as part of the modern-ization program. The runway is7,500 ft. (2,286 m) in length and150 ft. (45.7 m) wide and includesa 7,500 ft. (2,286 m) long east-westparallel taxiway (Taxiway W)immediately north of the runwayand a 2,000-ft. (609 m) long con-necting taxiway to the south air-field (Taxiway AA). Constructionon the $516 million runway andtaxiway system began in spring2011.“The key challenges associated

with the development of the run-way were addressed with previous-ly completed projects that enabledthe construction of Runway 10C-28C, and the extension of Runway10L,” Price said. “These includedthe relocation of multiple on-air-port facilities and the demolition ofmore than 600 residences in theVillage of Bensenville. Some ofthe on-airport facilities that wererelocated did not provide an airport

function, such as the relocation of aportion of a state-owned roadway[Irving Park Road] and a portion ofUnion Pacific Railroad line.”The challenges were overcome

largely through collaboration withother key players, she said. “This included not only the syn-

ergy from all members of theO’Hare Modernization Programand the leadership of the ChicagoDepartment of Aviation, but alsothe cooperation of key stakehold-ers outside of the organization.Creative and proactive projectplanning proved to be effective inanticipating and addressing projectchallenges.”The project called for the use of

both common and specialityequipment, including: • Guntert & Zimmerman con-

crete paving machine with an auto-mated dowel bar inserter, also usedin the earlier construction ofRunway 10C-28C• Grooving machines• Articulated trucks•Asphalt paving machines• Excavators

• Dozers• Compactors• Sheepsfoot rollers• Motorgraders• Auger trucks• Cable pulling truck• Coring rig• Semi trucks• Cranes• HydromulcherThe new runway required the

construction of the new $41 mil-lion FAA air traffic control tower toensure that FAA controllers havean unobstructed view of the entirerunway surface, Price said.O’Hare’s central tower, adjacent tothe terminal core, does not providethis required view. “The South Air Traffic Control

Tower stands 218-ft. above groundand provides an iconic addition to

the landscape of O’HareInternational Airport,” Price said.“While this facility provides all thefunctional requirements needed, itwas also designed to incorporatesophisticated sustainable initia-tives, including the reliance of ageothermal field to support thebuilding’s HVAC.”The new tower is 218-ft. tall

(66.4 m) with a 10,000 sq. ft. (929sq m) base building. It wasdesigned to achieve LEED Goldcertification by the U.S. GreenBuilding Council and includes a10,000 sq.-ft. vegetated green roof,a geothermal energy system andmany other sustainable features.The commissioning of Runway10R-28L and the SATCT marksthe completion of all south airfieldconstruction on the OMP.No state or local taxpayer dol-

lars were used to fund these proj-ects, Price said.

(This story also can be foundon Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)CEG

The project is part of the O’Hare Modernization Program, an $8.7billion plan that’s been in the works since it was announced in2001.

O’HARE from page 1

Construction Unemployment Falls toLowest September Mark in 15 Yearssaid Ken Simonson, the association’schief economist. “Contractors wouldlove to hire more workers but therearen’t enough qualified craft workersor supervisors available.”Construction employment totaled

6.4 million in September, the mostsince February 2009, but the total roseby only 8,000 in September and by205,000 or 3.3 percent over the pastyear, Simonson noted. In the previous12 months, construction employmenthad risen by 298,000 or 5.1 percent.The number of unemployed job-

seekers in September who last workedin construction totaled 479,000, thelowest figure for September since2000. The unemployment rate for suchworkers was 5.5 percent, the lowestSeptember number since 2001.Meanwhile, Census Bureau datareleased on Oct. 1 showed that thegrowth in construction spending accel-erated to a nine-year high of 13.7 per-cent in the latest 12 months — August

2014 to August 2015 — from a 2.7 per-cent rate a year earlier.“The most likely explanation for

these divergent trends is that the pool ofunemployed workers with constructionexperience has evaporated,” Simonsonsaid. “Overwhelmingly, contractors saythey are having trouble finding workersto fill a variety of craft and supervisorypositions.” ��Simonson pointed to a sur-vey the association released inSeptember that found 86 percent ofconstruction firms reported difficultyfilling hourly craft or salaried positions.In particular, 73 percent of firms thatemploy carpenters reporting troublefinding those workers. Across all 21crafts covered by the survey, at leastone-quarter of respondents reporteddifficulty filling each craft. Amongsalaried positions, 55 percent reporteddifficulty finding supervisors or projectmanagers.Association officials called on feder-

al, state and local officials to act onmeasures included in the association’s

Workforce Development Plan such asincreased funding for career and tech-nical education and an end to restric-tions on cooperative training programsto rebuild the pipeline for recruitingand preparing future construction pro-fessionals.“Too many school systems are not

providing students with opportunitiesto explore high-paying, in-demandcareers like construction,” said StephenE. Sandherr, the association’s chiefexecutive officer. “Unless federal, stateand local officials give educators,employers and associations greaterflexibility and resources to set up careerand technical educational training pro-grams, we are likely to see constructioncosts go up and schedules get delayed.”For more information, visit

www.agc.org.(This story also can be found on

Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)

JOBS from page 1

Page 106: Midwest 22 2015

Page 106 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

AIM ATTACHMENTS..............................................................................................36ALEX PARIS CONTRACTING CO INC....................................................................9ALTORFER CAT ....................................................................................................28AMERICAN STATE EQUIPMENT............................................................................7ARING EQUIPMENT CO INC ................................................................................17ASC CONSTRUCTION EQUIP USA ................................................................10,11ASPEN EQUIPMENT ............................................................................................48ATI CORPORATION/LEVEL BEST ..........................................................................6BAIR PRODUCTS INC ..........................................................................................41BARGAINS ........................................................................................................95,96BELL TRUCKS AMERICA INC ..............................................................................53BLANCHARD MACHINERY INC............................................................................30BOBCAT CO......................................................................................................54,54BOMAG AMERICA'S INC ......................................................................................85BOSS PRODUCTS ................................................................................................46BUTLER MACHINERY ..........................................................................................36CASE CONSTRUCTION........................................................................................75CATERPILLAR GLOBAL CONSTRUCTION..........................................................27CEG SCALE MODELS ..........................................................................................38CINCINNATI INDUSTRIAL AUCTIONEERS

MENTOR OH ............................................................................................101CK POWER............................................................................................................39CLASSIFIEDS ........................................................................................................96CONSTRUCTION EQUIPMENT GUIDE

FL AUCTION PROMO ..............................................................................102WORLD OF ASPHALT PROMO ..................................................................42TRAILER PROMO ......................................................................................94WANTED......................................................................................................97

CUSTOM MADE PRODUCTS ..............................................................................30DOMINION EQUIPMENT PARTS ..........................................................................70DRUMCUTTERS....................................................................................................39E TIP INC ..............................................................................................................43EFFICIENCY PRODUCTIONS ..............................................................................39ERB EQUIPMENT..................................................................................................15FABICK CAT ............................................................................................................2FINKBINER EQUIPMENT CO..................................................................................7FLANGE LOCK ......................................................................................................37FOLEY EQUIPMENT CO ......................................................................................23FURY MOTORS ....................................................................................................21GEHL72GOMACO CORP....................................................................................................87GROUSER PRODUCTS ........................................................................................46HINIKER NORTHEAST..........................................................................................49HITACHI MFG ..................................................................................................50,50HOLLAND EQUIPMENT SERVICES ....................................................................37HOWELL TRACTOR & EQUIPMENT CO............................................................108HYDREMA U S INC ..............................................................................................31HYUNDAI CONSTRUCTION EQUIPMENT ..........................................................67ILLINOIS TRUCK & EQUIPMENT ..........................................................................3

IMPACT ROLLER TECHNOLOGY INC ................................................................88IRAY AUCTION

FOLEY MN ................................................................................................105IRONPLANET

HOUSTON TX............................................................................................103ISUZU DIESEL ......................................................................................................59JCB INC ............................................................................................................68,68JFW EQUIPMENT INC ..........................................................................................88JJ SCHECKEL........................................................................................................33JOHN DEERE ..................................................................................................64,64JOHN DEERE SKID STEER..................................................................................47KAWASAKI ............................................................................................................29KOMATSU AMERICA CORP ............................................................................60,60KUBOTA SVL ......................................................................................................107LANO EQUIPMENT INC ........................................................................................16LEEBOY ............................................................................................................82,82LINK-BELT EXCAVATORS ....................................................................................26MAGNUM ATTACHMENTS....................................................................................96MAULDIN PAVING PRODUCTS............................................................................89MB AMERICA INC..................................................................................................35MCCANN INDUSTRIES INC....................................................................................6MINNICH MFG ......................................................................................................32NITKE SALES INC

WAUSAU WI ..............................................................................................101NPK CONSTRUCTION EQUIPMENT INC ............................................................22NUSS GROUP ........................................................................................................8PATTEN TRACTOR & EQUIPMENT CO ..............................................................25PRO-TEC EQUIPMENT ........................................................................................43RANSOME EQUIPMENT SALES LLC ..................................................................97RAYCO ..................................................................................................................35RITCHIE BROS. AUCTIONEERS

YOUNGSTOWN OH ..............................................................................98,99ROAD BUILDERS MACHINERY ......................................................................13,70ROADTEC ..............................................................................................................81ROLAND MACHINERY INC ....................................................................................5ROSCO MFG CO ..................................................................................................91SAKAI AMERICA INC ............................................................................................93SOUTHEASTERN EQUIPMENT CO ....................................................................36STAR EQUIPMENT LTD ..........................................................................................6TAKEUCHI ........................................................................................................76,76THE VICTOR L PHILLIPS CO ..............................................................................43THUNDERCREEK..................................................................................................41TRI-STATE BOBCAT..............................................................................................19VOLVO COMPACTION ..........................................................................................93VOLVO CONSTRUCTION EQUIPMENT ..............................................................73WACKER NEUSON CORP....................................................................................71WEST SIDE TRACTOR SALES ............................................................................30WIRTGEN AMERICA ............................................................................................90YANMAR AMERICA ..............................................................................................52

To read articles about these CEG advertisers, visit www.constructionequipmentguide.com

Page 107: Midwest 22 2015

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 24, 2015 • Page 107

Kubota.com/Construction

© Kubota Tractor Corporation, 2015.

Reliable. Durable. Muscle-bound. The Kubota SVL Compact Track Loaders are model employees. And models of engineering. Featuring proven Kubota engines, best-in-class breakout force and a smooth ride, they show up ready to work, day in and day out.

www.arnoldsinc.comArnold’s of Kimball

701 State Hwy 55 E • Kimball, MN 55353320/398-3800

Arnold’s of Glencoe655 Lindbergh Trail • Glencoe, MN 55336

320/864-5531

Arnold’s of St. Martin374 Industrial Drive • St. Martin, MN 56376

320/548-3285

Arnold’s of Mankato1715 Howard Drive • No. Mankato, MN 56003

507/387-5515

Arnold’s of St. Cloud2995 Quail Rd. NE • Sauk Rapids, MN 56379

320/251-2585

BURRIS EQUIPMENT CO.www.burrisequipment.com

2216 N. Green Bay Rd. • Waukegan, IL 60087847/336-1205

Fax: 847/336-2697

27939 W. Concrete Dr. • Ingleside, IL 60041815/363-4100

2001 Cherry Hill Rd. • Joliet, IL 60433815/464-6650

Fax: 815/464-6951

COLUMBUS EQUIPMENT COMPANYwww.columbusequipment.com

50 Kingston Ave. • Columbus, OH 43207614/443-6541

12500 Williams Road • Perrysburg, OH 43551419/872-7101

7570 New Carlisle Pike • Dayton, OH 45424937/879-3154

1st CHOICE EQUIPMENT LLC124 N. Schmale Rd. • Carol Stream, IL 60188

630/510-6050Fax: 630/510-6051

1305 Sentry Drive • Waukesha, WI 53186262/521-5802

Fax: 262/521-5801

ABC EQUIPMENT RENTAL & SALES INC.www.abcequipment.com

29 Pearl Rd. • Brunswick, OH 44212888/572-3888

Fax: 330/220-4949

38525 Chester Rd. • Avon, OH 44011440/934-7368

6140 Highway 10Anoka, MN 55303

888/448-5266

3021 133rd St. SWShakopee, MN877/753-6100

LANO EQUIPMENT INC.www.lanoequip.com

HAUG-KUBOTA, LLC.www.haugkubota.com3585 E. Hwy 12 E.Willmar, MN 56201

320/235-2717Fax: 320/235-2771

NIEBUR TRACTOR & EQUIPMENT, INC.

www.nieburtractor.com14380 240th St. E.

Hastings, MN888/839-686023580 Highway 55

Loretto, MN888/479-4342

Page 108: Midwest 22 2015

Page 108 • October 24, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE