MediaSense Release Notes, Release 11.5(1)SU01First Published: 2017-06-02

Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883

© 2017 Cisco Systems, Inc. All rights reserved.

C O N T E N T S

C H A P T E R 1 Release Notes 1

Introduction to Cisco MediaSense Release 11.5(1)SU01 1

Features for Cisco MediaSense Release 11.5(1)SU01 1

Requirements for Cisco MediaSense Release 11.5(1)SU01 2

Caveats 3

Obtaining Documentation and Submitting a Service Request 4

MediaSense Release Notes, Release 11.5(1)SU01 iii

MediaSense Release Notes, Release 11.5(1)SU01iv

Contents

C H A P T E R 1Release Notes

• Introduction to Cisco MediaSense Release 11.5(1)SU01, page 1

• Features for Cisco MediaSense Release 11.5(1)SU01, page 1

• Requirements for Cisco MediaSense Release 11.5(1)SU01, page 2

• Caveats, page 3

• Obtaining Documentation and Submitting a Service Request , page 4

Introduction to Cisco MediaSense Release 11.5(1)SU01These release notes describe changes for Release 11.5(1)SU01 of Cisco MediaSense. You can also openrelease notes for prior versions of Cisco MediaSense available at http://www.cisco.com/c/en/us/support/customer-collaboration/mediasense/tsd-products-support-series-home.html.

These release notes are based on the following software version: 11.5.1.11001-4

Features for Cisco MediaSense Release 11.5(1)SU01The following new features have been introduced in Cisco MediaSense Release 11.5(1)SU01.

MediaSense Video Recording Playback Enhancement

When a video call from CUBE comes to MediaSense, it starts recording it and when the same call puts onhold and VoH starts playing then this VoH would get recorded in the same session with the previous call andwhen it gets resumed the same session would be used to record the call but after the implementation of thisfeature, the VoH of a video call from CUBE will get recorded in a separate session and the previous sessionwill move to close state and when the call will resume, the MediaSense will again create a new session forthe remaining call and the VoH session will get closed.

For a case where no media is configured during hold or MoH is played then there will not be any change inbehavior from MediaSense side i.e. it will get recorded in a single session and no separate session is createdin case of MoH and No media.

MediaSense Release Notes, Release 11.5(1)SU01 1

The MediaSense behavior with CUCM call will remain the same and will not get changed by this feature.Note

Requirements for Cisco MediaSense Release 11.5(1)SU01These requirements and support constraints are new or have changed for MediaSense Release 11.5(1)SU01.

Platform Requirements for Cisco MediaSense Release 11.5(1)SU01

For platform requirements, refer to http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_MediaSense.

Upgrade Requirements for Cisco MediaSense 11.5(1)SU01

The upgrade application posted on Cisco.com can be used to directly upgradeMediaSense 10.x to 11.5(1)SU01;it cannot be used to install a new MediaSense 11.5(1)SU01 server.

SomeVirtualMachine parameter settings have changed.Make sure that you complete the required changesas described in the Virtual Machine Parameters Settings for Refresh Upgrade section in the CiscoMediaSense User Guide before you perform a refresh upgrade.

Note

You can download the file, UCSInstall_MCP_11.5.1.11001-4.sgn.iso, for an upgrade from the followinglocation.

https://software.cisco.com/download/type.html?mdfid=283613140&i=rm

On an upgrade to release 11.5(1)SU01, the following message appears:

Partitions are unaligned, however this does not have a functionalimpact.

You can ignore the message as it does not impact MediaSense functionality and performance.

Note

Supported Upgrade Paths

The following table lists the supported paths to upgrade to Cisco MediaSense 11.5(1)SU01.

DescriptionUpgrade PathCurrent Version

A Cisco Options Package (COP) file isrequired to perform an upgrade fromRelease 9.1(1) to Release 10.x.

A COP file provides a generic methodto deploy Cisco software outside thenormal upgrade process.

1 First upgrade fromRelease 9.1(1) to Release10.x.

2 Then upgrade directly from Release 10.x toRelease 11.5(1)SU01.

Release 9.1(1)

MediaSense Release Notes, Release 11.5(1)SU012

Release NotesRequirements for Cisco MediaSense Release 11.5(1)SU01

DescriptionUpgrade PathCurrent Version

This is a refresh upgrade as the RHELversion of the MediaSense operatingsystem changes in Release 11.5(1)SU01.

Upgrade directly to Release 11.5(1)SU01.Release 10.x

This is a L2 upgrade and there is nochange in RHEL version.

Upgrade directly to Release 11.5(1)SU01.Release 11.x

For more information about MediaSense Upgrade, see the Upgrade Mediasense section of MediSense UserGuide.

CaveatsBug Search Tool

If you have an account with Cisco.com, you can use Cisco Bug Search tool to find detailed information aboutdefects.

To use the Bug Search tool, visit https://www.cisco.com/cisco/psn/bssprt/bss.

Resolved Defects

The defects listed in the following table were resolved in Release 11.5(1)SU01.

HeadlineComponentSeverityIdentifier

Comfort Noise in RTP stream causes corrupted voice in ExportRawStream.

vsms2CSCvb26410

CVE-2014-3566 not resolved for ports other than 443/8443.psirt3CSCvb20012

Missing 'Secure' Attribute in Encrypted Session (SSL) forMediaSense URLs.

other7CSCvb96838

VSMS:MediaSense may drop some RTP packets while processingVideo calls.

vsms3CSCux72340

MediaSense S&P display ACDT timezone with wrong GMT.user interface4CSCuy42184

VSMS: Playback save of G729 codec having issue with NICE onfew calls.

vsms3CSCux72490

MediaSense 11.5 RTMT File Download Failures.serviceability3CSCvc05296

utils remote_account disable fails with selinux error.vos-platform3CSCvc71496

MediaSense Release Notes, Release 11.5(1)SU01 3

Release NotesCaveats

Closed Defects

The defects listed in the following table were closed in Release 11.5(1)SU01.

HeadlineComponentSeverityIdentifier

UCCX does notreauthenticate toMediaSense afterMediaSense server restart.

ccx-integration3CSCvd68145

Mediasense DRF can stillbe accessed directly withURL.

vos-platform3CSCvd39240

No backup device isconfigured error inmediasense 11.5.

admin3CSCvc06856

Evaluation of cvos forCVE-2016-5195 (DIRTYCoW).

vos-platform3CSCvb88511

Open Defects

The defects listed in the following table were open in Release 11.5(1)SU01.

HeadlineComponentSeverityIdentifier

Informix cores observedon MediaSense 11.5.

database3CSCvc85770

Metadata with tags startswith "Tag" keyword inMS 11.5, while in oldversion MS 11.0 it was"Tags" .

user interface3CSCvc62459

Obtaining Documentation and Submitting a Service RequestFor information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a servicerequest, and gathering additional information, see What's New in Cisco Product Documentation.

To receive new and revised Cisco technical content directly to your desktop, you can subscribe to the What'sNew in Cisco Product Documentation RSS feed. RSS feeds are a free service.

MediaSense Release Notes, Release 11.5(1)SU014

Release NotesObtaining Documentation and Submitting a Service Request