INDIAN STANDARDS MECHANICAL ENGINEERING DIVISION COUNCIL (MED) SR. No. CAT DESCRIPTION IS 655: 1963 MED 3 Metal air ducts (revised) (Amendments 3) IS 660: 1963 MED 3 Safety code for mechanical refrigeration (revised) IS 2062: 1992 MED 4 Steel for general structural purpose (fourth revision)

(superseded IS: 226:1975) (Amendments 4) IS 2712: 1998

MED 19 Gaskets and packings- compressed asbestos fibre jointing (third revision)

IS 2787: 1986 MED 26 Oil pressure heaters (second revision) (Amendments 2)

IS 2825: 1969 MED 2 Code for unfired pressure vessels (Amendments 5) IS 3233: 1965 MED 17 Glossary of terns for safety and relief valves and their

parts IS 3832: 1986 MED 14 Hand operated chain pulley blocks (second revision) IS 4049 (Part 1): 1988

MED 17 Formed ends for tanks and pressure vessels: Part 1 Based on outside diameter basis (second revision) (Amendment 1)

IS 4049 (Part 2): 1996

MED 17 Formed ends for tanks and pressure vessels: Part 2 inside diameter basis (first revision)

IS 4179: 1967 MED 17 Sizes of process vessels and leading dimensions IS 4503: 1967 MED 17 Shell and tube type heat exchangers (Amendments 3) IS 4682 (Part 1): 1994

MED 17 Code of practice for lining of vessels and equipments for chemical processes: Part 1 Rubber lining (first revision) (Amendment 1)

IS 4682 (Part 5): 1970

MED 17 Code of practice for lining of vessels and equipments for chemical processes: Part 5 Epoxide resin lining

IS 4682 (Part 6): 1970

MED 17 Code of practice for lining of vessels and equipments for chemical processes: Part 6 Phenolic resin lining

IS 4682 (Part 7): 1974

MED 17 Code of practice for lining of vessels and equipments for chemical processes: Part 7 Corrosion and heat resistant metals

IS 4682 (Part 9): 1994

MED 7 Code of practice for lining of vessels and equipments for chemical processes: Part 9 Titanium

IS 4687: 1995 MED 19 Gaskets and packings – gland packing asbestos (second revision)

IS 4831: 1968 MED 3 Recommendation on units and symbols for refrigeration

IS 4864: 1968 MED 17 Shell flanges for vessels and equipment: General requirements

IS 4865: 1968 MED 17 Welded shell flanges for non-pressure service IS 4866: 1968 MED 17 Welded shell flanges for carbon steel pressure vessels

and equipment IS 4867: 1968 MED 17 Welded neck shell flanges for carbon steel pressure

vessels and equipment IS 4868: 1968 MED 17 Welded shell flanges for stainless steel pressure

vessels and equipment IS 4869: 1968 MED 17 Welded shell flanges with hub for stainless steel

pressure vessels and equipment

IS 4870: 1968 MED 17 Flat gaskets for shell flanges IS 5414: 1995 MED 19 Gaskets & packings – gland packing, jute and hemp

(first revision) IS 5428 (Part 1): 1985

MED 17 Gauge glasses: Part 1 Tubular glasses for level gauges (first revision)

IS 5428 (Part 2): 1985

MED 17 Gauge glasses: Part 2 Protector glasses for tubular gauge glasses (first revision)

IS 5428 (Part 3): 1985

MED 17 Gauge glasses: Part 3 Through vision and reflex glasses (first revision)

IS 5428 (Part 4): 1985

MED 17 Gauge glasses: Part 4 Circular sight and light glasses (first revision)

IS 5428 (Part 5): 1985

MED 17 Gauge glasses: Part 5 Port gauge glasses as used in fitting for steam boilers (first revision)

IS 5563: 1985 MED 6 Screw conveyors for industrial use (first revision)

IS 6547: 1972 MED 14 Electric chain hoists (Amendment 1) IS 7714: 1975 MED 19 Method of seability test for gasket materials (1st rev) IS 7719: 1975 MED 19 Metallic spiral wound gaskets (Amendment 1) IS 8595: 1977 MED 1 Terminology for parameters of stationery steam

boilers (Amendment 1) IS 8596: 1977 MED 1 Recommended parameters of stationary steam boilers IS 8633: 1977 MED 1 Technical requirements for location of boilers

installations and boiler houses IS 8753: 1977 MED 1 Code for acceptance tests on stationery steam

generators of the power station type IS 9330: 1979 MED 1 Terminology for parameters of waste heat boilers and

boilers for special purpose IS 9332: 1979 MED 1 Recommended parameters of waste heat boilers and

boilers for special purpose IS 9975 (Part 1): 1981

MED 19 ‘O’ rings: Part 1 Dimensions (Amendments 2)

IS 9975 (Part 2): 1984

MED 19 ‘O’ rings: Part 2 Material selection and quality acceptance criteria

IS 9975 (Part 3): 1984

MED 19 ‘O’ rings: Part 3 Seal housing dimensions and tolerances (Amendment 1)

IS 9975 (Part 4): 1984

MED 19 ‘O’ rings: Part 4 Terminology and definition of terms Dimensions (Amendments 2)

IS 10123: 1982 MED 17 Data sheet for shell and tube type heat exchangers IS 10330: 1982 MED 19 Formed asbestos packing rings of high pressure and

high temperature IS 10470: 1983 MED 17 Air cooled heat exchangers (Amendment 1) IS 10596 (Part 1): 1983

MED 20 Code of practice for selection, installation, operation and maintenance of pumps for industrial applications: Part 1 Selection

IS 10596 (Part 2): 1983

MED 20 Code of practice for selection, installation, operation and maintenance of pumps for industrial applications: Part 2 Installation

IS 10596 (Part 3): 1983

MED 20 Code of practice for selection, installation, operation and maintenance of pumps for industrial applications: Part 3 Operation

IS 10596 (Part 4): 1983

MED 20 Code of practice for selection, installation, operation and maintenance of pumps for industrial applications: Part 4 Maintenance

IS 10605: 1989 MED 17 Steel globe valves (flanged and butt welded ends) for petroleum, petrochemcial and allied industries (first revision)

IS 10732: 1983 MED 17 Purchaser’s data sheet for gauge glasses for pressure vessels

IS 10873: 1983 MED 17 Data sheet for air cooled heat exchangers

IS 11149: 1984 MED 19 Rubber gaskets (Amendment 1)

IS 11561:1986 MED 3 Code of practice for testing of cooling towers IS 11724: 1985 MED 4 Basis for specifying the rules in evaluating the

mechanical vibration of machines in the operation range 10 to 200 rev/s

IS 11726: 1985 MED 4 Requirements for instruments for measuring vibration severity of rotating and reciprocating machines

IS 11727: 1985 MED 4 Measurement and evaluation of vibration severity in situ of large rotating machines with speed range from 10 to 200 rev/s

IS 11745: 1986 MED 20 Technical supply conditions for positive displacement pumps – reciprocating

IS 11790: 1986 MED 17 Code of practice for preparation of butt welding ends for pipes, valves, flanges and fittings

IS 12059:1987 MED 6 Dimensions for rotary vane feeders IS 12060:1987 MED 6 Code of practice for selection of rotary vane feeders IS 12202:1987 MED 26 Glossary of terms relating to oil burning appliances

(pressure type and non pressure type) IS 12273:1987 MED 17 Industrial oil fired burners IS 12370:1993 MED 17 Bursting discs and bursting disc devices (first revision) IS 12907:1990 MED 6 Screw feeder – purchaser’s data sheet IS 12960:1990 MED 6 Determination of power requirements of screw feeders

- general requirements IS 12992 (Part 1): 1993

MED 17 Safety relief valves - spring loaded: Part 1 Design

IS 12992 (Part 2): 1990

MED 17 Safety relief valves - spring loaded: Part 2 Testing

IS 13139:1992 MED 20 End suction centrifugal pumps – base plate and installation – dimensions

IS 13257:1992 MED 19 Ring type joint gasket and grooves for pipe flanges IS 13274:1992 MED 4 Mechanical vibration – balancing – vocabulary IS 13276(Part 1): 1992

MED 4 Evaluation of human exposure to whole-body vibration: Part 1 General requirements

IS 13276(Part 2): 1992

MED 4 Evaluation of human exposure to whole-body vibration: Part 2 Continuous and shock – included vibrations in buildings (1Hz to 50 Hz)

IS 13276(Part 3): 1992

MED 4 Evaluation of human exposure to whole-body vibration: Part 3 Evaluation of exposure to wholebody z-axis verti-cal vibration in the frequency range 0.1 Hz to 0.63 Hz

IS 13281:1992 MED 4 Mechanical vibration and shock affecting man – vocabulary

IS 13306: 1992 MED 17 Oil and gas fired thermic fluid heaters – method of calculation of film temperature

IS 13324:1992 MED 6 Screw feeders- general requirements IS 13445 (Part 1): 1992

MED 1 Industrial water tube boilers – supplier’s data sheet: Part 1 Proposed stage

IS 13445 (Part 2): 1992

MED 1 Suppliers data sheet for industrial water tube boilers: Part 2 Post order stage

IS 13477:1992 MED 1 Industrial water tube boiler-purchaser’s data sheet IS 13619: 1993 MED 1 Industrial steam and hot water boiler plants-

maintaining of log and summary sheets – recommendations

IS 13979:1994 MED 1 Method of calculation of efficiency of packaged boilers IS 13980: 1995 MED 1 Acceptance tests on industrial boilers – code of

practice IS 14259: 1995 MED 4 Vibration and shock – isolators – procedure for

specifying characteristics IS14331:1996 MED 16 Steels for high temperature bolting applications IS 14404: 1996

MED 17 Process equipment – recommendations on design pressure and temperature (amalgamating IS 2845:1964 and IS 2846:1964)

*********