Embed Size (px)
Citation preview
measuring precise 3-dimensional building models on site
mobile BIM laser measuring system
measuring and modeling.In one working step to the Virtual Building™ model.
Flexijet4architects is a new, revolutionary BIM measuring system (BIM - Building Information Modeling) whose diversity enables fi rst-time users, all-rounders and specialists to create an ideal measurement.
“Measure-drawing“ with Flexijet4architects
Measuring, drawing and modeling altogether in one working step. With the ARCHICAD AddOn and the fl exible and laser supported 3D measuring system Flexijet recording of an object-oriented building measurement is possible - a Virtual Building™ model.
The system consists of a tripod, a tilt and swivel unit and the laser distance meter Leica Disto. It is set up, switched on and oriented in the room.
Built-in tilt sensors calibrate Flexijet auto-matically. The nodes are aimed at by rotating
and tilting the laser by hand or motor-driven with a radio remote control.
easiest activation of the measurement
The measurement is activated directly on the device, by pressing a key on the notebook or via remote control. The digital pointfi nder of the laser distance meter which has 4x zoom and a high resolution 2.4“ colour display enables a precise aiming at distant objects, even in rather diffi cult lighting conditions.
data transfer via Bluetooth
The measured data is wirelessly transferred directly to ARCHICAD via Bluetooth which enables the measurer to move freely.
All necessary tools in the Flexijet programme can be controlled with intelligent commands for the measurement.
Flexijet4architects hardware
robust trunk with notebook compartment
remote control for motor & measurementoptional:
carbon fi bre tripod
height adjustable non-slip stand for notebooks
laser distance meterLeica Disto sensor for
activating the measurement
Leica Disto
carbon fi bre tripod
in one working step to the building model
from node to building model
During the measurement ARCHICAD creates a 3-dimensional BIM simultaneously, the basis for all fl oor plans, elevations and sections of the building.
Forgotten nodes belong to the past due to Flexijet4architects complete graphic on-site control of the measurement in progress.
Working with Flexijet4architects on refurbish-ments and preservations of listed buildings enhances the reliability of an effi cient planning process and the economical viability.
The follow-up time in the offi ce is shortened to adding dimensions and setting the layout of the plans.
With the help of various 2- and 3-dimensional data interfaces like IFC, U3D, 3D PDF or DWG and DXF the data can be proceeded in common CAD programmes.
This technology provides a new quality for building measurements. A quality neither achievable by using manual measurement, laser scanner and point clouds nor tachymetric measurements with 3D lines.
automatic series of measurements
Automatic series of measurements (horizontal, vertical and random path) measure automatically by defi ning starting point, direction and point distance.
connection to Leica tachymeter
If measuring large buildings and extensive areas it might be reasonable to complement the BIM measurement with a tachymeter.
The Leica builder series tachymeters are especially developed for outside use and able to measure long distances precisely due to its direct refl ex technology.
During their measurement outside facilities can be created in 3D with the help of open spaces as solids as well as areas and volumes can be calculated. This way e.g. the excavated material on a construction site can be calculated with Flexijet4architects.
show construction markers in existing buildings
The new planning for existing buildings can be shown on site via laser. Flexijet4architects can “move to“ construction markers of the building model on site, e.g. drillings, anchor bolts or marks for cutting.
By clicking on the construction marker Flexijet4architects shows it on the wall or fl oor.
utomatic series of measurements of a cornice
This function is used for complex surfaces like e.g. mouldings, cornices, pilasters, vaults and hulls.
3D elevation of a cornice model in ARCHICAD
3D objects of a cornice in ARCHICAD
measuring and modelingin one working step to the building model
measuring and modelingin one working step to the building model
battery compartment
The Building Information Modeling (BIM) measurement is the basis, the centrepiece for all continuative planning phases and the foundation for intelligent data transfer with other consultants.
ARCHICAD‘s BIM technology supports you effectively from your very fi rst idea to the last details in working drawings - including reliable costing at an early stage, as well as the determination of energy demand.
You “build“ a virtual 3-dimensional building from which, in every phase of the planning and construction process, you are able to extract the informtion you need like:
building volumes including the shadow they cast, planning application, working drawings, sections, elevations, quantities, object analyses, detail drawings, animations, renderings, presentations, budgeting, energy calculation or data for a facility management.
All users work with their various tasks on the same building model during the entire planning and construction process.
Flexijet4architects supports the BIM Server™ technology of Graphisoft. This means that while some people
take measurements on a building others are able to work on the same fi le in the offi ce simultaneously.
This creates transparency, avoids superfl uities and improves the economical viability.
With Flexijet4architects you conduct your measurement both rationally and effi ciently.
Die Vorteile eines 3dimensionalen Gebäudemodells:
BIM measurement with Flexijet4architects
Building Information Modeling measurementcentrepiece with added value
BIM measurement with Flexijet4architects
centrepiece with added valueBIM measurement with Flexijet4architects
Building Information Modeling measurementcentrepiece with added value
Building Information Modeling measurement
BIM Explorer by Graphisoft®
The innovative and interactive presentation tool enables you to take a tour through the building model from the fi rst person perspective.
Your projects are independent of CAD and any platform (usable on iPhone and iPad too).
data exchange
For an intelligent, highly qualifi ed data exchange IFC (Industrial Foundation Classes) was developed as a standard.
The Virtual Building™ model can be transferred to these systems without loss: ALLPLAN, Vektorworks, Revit, AutoCAD, Adobe Acrobat, DDS-CAD etc.
architects & engineers
The BIM measurement is the indispensable basis for planning and redesign of existing buildings, as well as refurbishments. Sections, elevations, detail drawings, visualizations, analyses of quantities, surfaces, materials, parts lists and many more can be generated from the data model. The data is transferred via IFC to other programmes for structural calculation or earthquake simulation.
buildings, as well as refurbishments. Sections, elevations, detail drawings, visualizations, analyses of quantities, surfaces, materials, parts lists and many more can be generated from
consultants & craftspeople
Benefi t from exact and accurate measures. Building templates and unpleasant surprises on the construction site belong to the past. Furniture makers, interior designers, carpenters, stonemasons, shopfi tters, fi tters, yacht interior designers, metalworkers, glazing and facade manufacturers use it as a basis for their designs e.g. TISCHLERCAD®.
Benefi t from exact and accurate measures. Building templates and unpleasant surprises on the construction site
Furniture makers, interior designers,
designers, metalworkers, glazing
real estate agents and facility manager
Apart from the various possibilities of presentation for e.g. escape route and furnishing plans you will appreciate the comprehensible area calculations, as well as the alphanumeric presentation of the buildings, components and objects like windows, doors, fi re protection appliances etc. while transferring the data to FM systems.
energy consultants
You transfer the data of the measurement from fl exijet4architects to energy calculation programmes like Hottgenroth-Software or ArchiPHYSIK. Hence, the BIM measurement is basis for energy performance certifi cates and energy retrofi tting.
The EcoDesigner™ supports your calculations of the energy demand, the expected CO2 emissions and the monthly energy balance of your building.
MEP measurement
With fl exijet4architects you can capture 3D ductwork like conduits, pipes and cable trays of the construction trades heating, air con- ditioning, ventilation, plum- bing and electrics into ARCHICAD. Which then can be coordinated in the Virtual Building™ with new plannings, i.e. is subject to an autom. collision detection.
you can capture 3D ductwork like conduits, pipes and cable trays of the construction
ditioning, ventilation, plum-
ARCHICAD. Which then can be coordinated in the Virtual Building™ with new plannings, i.e. is subject to an autom. collision detection.
visualization, rendering, 3D-print
The Virtual BuildingTM of an existing building is the basis for modern forms of presentation like visualized fi lms/images, 3D tours or printed 3D models.
Datentausch
BIM measurement with Flexijet4architects does the trick
advantages which make senseBIM measurement with Flexijet4architects does the trick
advantages which make senseBIM measurement with Flexijet4architects does the trick
Building Information Modeling measurementadvantages which make sense
Building Information Modeling measurementadvantages which make sense
With Flexijet4architects an object-oriented building is formed during the measurement.
With just a few nodes and/or series of measurements ARCHICAD forms 3-dimensional objects and building components.
walls and rooms
Two measurements per wall are enough to combine the respective wall elements automatically to a room.
Even angular, round or free-form shaped rooms can be cap-tured quickly in 3D.
windows and doors
Only two measure-ments along the diagonal are suffi cient to set the height, width, parapet height and position of windows and doors.
A wide range of pre-confi gured choices of windows and doorsis available.
Enhancement of the reliability of an effi cient planning process and the economic viability.
With the 3-dimensional building model all relevant information (areas, measures, materials etc.) is immediately available for its users like architects, engineers, craftspeople, real estate agents, facility managers and energy consultants.
roof trusses and roofs
Struts, purlins and rafters are recorded and placed with angle and height from the position of the device - without ladder or scaffolding.
The setting of nodes is possible on any visible point. A levelling of the fl oor is not necessary.
distinctive and free-form objects
Groin vaults and columns are measured in length, width, height and position with Flexijet4architects and placed in the model via laser.
Inventory like tables, wardrobes or lamps can be just as easily and fl exibly recorded.
further advantages of the Flexijet4architects measuring system
only one person is necessary to do the measurement
Measuring without limitations: 360° vertical &
horizontal, also upright downwards and upwards
immediate calculation of areas and volumes after the measuring of the respective nodes
immediate graphic on-site control
easy to use without laborious setting
of the tripod
false and forgotten measures or
transcription errors belong to the past
only one person is necessary to do the measurement only one person is necessary to do the measurement only one person is necessary to do the measurement360°
?2 3,5
1,2
= 9,8m³
Measuring without limitations: 360° vertical &
horizontal, also upright downwards and upwards
Measuring without limitations: 360° vertical & Measuring without limitations: 360° vertical & Measuring without limitations: 360° vertical & 360°
?2 3,5
1,2
= 9,8m³
false and forgotten measures or
transcription errors belong to the past
false and forgotten measures or false and forgotten measures or 360°
?2 3,5
1,2
= 9,8m³
360°
easy to use without laborious setting
of the tripod
easy to use without laborious setting easy to use without laborious setting ?2 3,5
1,2
= 9,8m³
360°
? immediate graphic on-site control immediate graphic on-site control 2 3,5
1,2
= 9,8m³
360°
?
the measuring of the respective nodes the measuring of the respective nodes2 3,5
1,2
= 9,8m³
staircases
Only a few steps enable a simplifi ed “measure-drawing“ of almost any shape of staircases.
Measuring the string, entry step, exit step and the height between fl oors, as well as the number
terrain models
Terrain models for presentation drawings are an easy task for Flexijet4architects.
The contours of the site are modeled by measur-ing any amount of nodes. All open spaces, inclined fl oors and sloping ceilings are measured like this.
Measuring and modeling in one working step.
Distinctive window and door objects can be “measure-drawn“, modeled and used as 3-dimensional objects.
The transfer of objects with all their attributes is possible, for example to FM systems.
of steps is suffi cient for ARCHICAD to generate a 3-dimensional staircase. It goes without saying that it is possible to measure single steps too.
“With Flexijet4architects completely new possibilities are opening up to me. I am able to use the entire functionality of ARCHICAD while measuring, without the need for measuring auxiliary constructions.“
Holger Lay carpenter, Lay Aufmaß Service
„For us Flexijet4architects is the ideal tool for an effi cient planning with maximized interoperability, and sustainable construction and management of buildings both on schedule and on budget.“
Dipl.-Ing. Architekt Nicolai Thiele, ft+ architekten
What users habe to say about Flexijet4architects
Therefore, it is possible to calculate the volumes of the materials to be excavated and the fi ll. Plants and trees can be placed on the terrain model with just one measurement.
We are happy to give you advice:
general distributor of Flexijet4architectsGermany
BIMm GmbH
Heinrich-Röhm-Str. 4789567 Sontheim
telephone: +49 7325 92 92 -88email: [email protected]
URL: www.bim-aufmass.de
Austria
A-NULL Bausoftware GmbH
Mittersteig 101050 Wien
telephone: +43 1 586 86 10email: [email protected]
URL: www.a-null.com
Switzerland
Schulzarchitektur GmbH
Grindlenstrasse 58954 Geroldswil
telephone: +41 7935 872 50email: [email protected]
URL: www.s-arch.ch
schulzarchitektur gmbh
grindlenstrasse 5
ch-8954 geroldswil
fon +41 44 747 52 40
fax +41 44 355 31 85
www.s-arch.ch
archs
Flexijet is a brand of Techni-Soft GmbH.
ARCHICAD, Virtual Building model, EcoDesigner and MEP Modeler are registered trademarks of Graphisoft R&D Zrt. ALLPLAN, Vektorworks, Revit, AutoCAD, Adobe Acrobat and DDS-CAD are manufacturer brands.
© images: cover, page 3, 4: project of Liegler Takeh Architekten ZT-GmbH, Filmrolle: Fotolia.com: _typomaniac page 3, 4: Sofi ensäle: schreinerkastler.at, Fotolia.com: babimu, GunnarAssmy, Kaarsten, Lisa F. Young, tbcgfoto
„With Flexijet4architects we have found a solution which enables us to deliver all the data on existing buildings needed by architects, planners and real estate managers - a measured object-oriented building model. No other measuring method would meet the requirements of our clients that effi ciently.“
Dipl.-Ing. Gerhard Neuner, Necon ZT KG
„For us Flexijet4architects is an ideal system for measuring existing buildings. It offers a wide range of possibilities which encapsulates existing buildings, entire streets and bridges both quickly and easily. In respect of preserving listed buildings we have set the benchmark for others by delivering the measurements to local authorities in 3D.“
Tino Wagner structural technician, Bauplanung Wagner
What users have to say about Flexijet4architects
The construction journal tested 3D measuring systems in 2010: winner Flexijet
The German federal prize for excellent and innovative achievements in crafts was awarded to Flexijet4architects in 2011 at the International Crafts Fair.
