Question Paper Title : WCOG_Paper4 Date of Exam : 31-01-2019 02:30 PM

Reference ID:(1402) When pipes are in series ____

A. Discharge is constant

B. Head loss is constant

C. Velocity is constant

D. Both Head loss is constant and Velocity is constant

Answer: A. Discharge is constant

Reference ID:(1934) Which one of the following method is adopted for mass production of pre-tensionedelements?

A.Hoyer's long line system of pre-tensioning

B.Freyssinet system

C.Gifford – Udall-CCL system

D.All the other options

Answer: A.Hoyer's long line system of pre-tensioning

MazhiNaukri.in

Reference ID:(2682) चार िवधाने (P,Q,R,S ) िदलेली आहे. िदले�ा पया�याम�े जर पिह�ा दोन िवधानांचा तक� िन�ष�ितसरे िवधान आहे, तर कोणता पया�य बरोबर आहे.

(P) काही रेिडओ इले�� ॉिनक आहेत. (Q) सव� रोबोट इले�� ॉिनक आहेत.

(R) काही रोबोट रेिडओ आहेत. (S) सव� रेिडओ रोबोट आहेत.

4 statements (P, Q, R and S) are given. Choose the option in which the thirdstatement is a logical conclusion of the first two statements.

(P) Some radios are electronic. (Q) All robots are electronic.

(R) Some robots are radios. (S) All radios are robots.

A.PQR A.PQR

B.PQS B.PQS

C.QRP C.QRP

D.RPQ D.RPQ

Answer: C.QRP C.QRP

Reference ID:(1654) For maximum discharge through trapezoidal section, a semi circle drawn from themid point of the top width with radius equal to depth of flow will touch _________sides of the channel.

A. One

B. Two

C. Three

MazhiNaukri.in

D. Four

Answer: C. Three

Reference ID:(2194) Which one of the following method is used for calculation of stress distribution in soilmass due to loaded areas of irregular shape?

A. boussinesq method

B. westergard method

C. newmarks influence chart

D. none of the above

Answer: C. newmarks influence chart

Reference ID:(1942) In which one of the following condition skidding of vehicles takes place?

A.Wheel revolves more than the corresponding longitudinal of movement along theroads

B.Wheel revolves less than the corresponding longitudinal of movement along theroads

C.Wheel revolves equal to the corresponding longitudinal movement along theroads

D.None of the above

Answer: B.Wheel revolves less than the corresponding longitudinal of movement along theroads

Reference ID:(1902) The correct relationship between void ratio (e)& porosity (ƞ) of soil mass is ____

MazhiNaukri.in

A.e = ƞ / (1- ƞ)

B.e = (1- ƞ) / ƞ

C.e = ƞ × (1 - ƞ)

D.e = ƞ × (2 + ƞ)

Answer: A.e = ƞ / (1- ƞ)

Reference ID:(2686) चार िवधाने (P,Q,R,S ) िदलेली आहे. िदले�ा पया�याम�े जर पिह�ा दोन िवधानांचा तक� िन�ष�ितसरे िवधान आहे, तर कोणता पया�य बरोबर आहे.

(P) काही कु�े काळा रंगाचे आहेत. (Q) सव� लांडगे काळा रंगाचे आहेत. (R) काही लांडगे कु�े आहेत.

(S) सव� कु�े लांडगे आहेत.

4 statements (P, Q, R and S) are given. Choose the option in which the thirdstatement is a logical conclusion of the first two statements.

(P) Some dogs are black. (Q) All wolves are black.

(R) Some wolves are dogs. (S) All dogs are wolves.

A.PQR A.PQR

B.PQS B.PQS

C.QRP C.QRP

D.RPQ D.RPQ

Answer: C.QRP C.QRP

MazhiNaukri.in

Reference ID:(1190) What is the viscosity of water at 20 degree celsius?

A. 0.01 poise

B. 0.1 poise

C. 1 poise

D. 10 poise

Answer: A. 0.01 poise

Reference ID:(1182) Which of the following water distribution system is known as “Tree system”?

A. Dead – end system

B. Grid – iron System

C. Ring system

D. Radial system

Answer: A. Dead – end system

Reference ID:(1662) For maximum discharge through a circular channel, the depth of flow is equal tohow much times its diameter?

A.0.72

MazhiNaukri.in

B.0.81

C.0.87

D.0.95

Answer: D.0.95

Reference ID:(1910) Which one of the following index is used to indicate the consistency of undisturbedsoils?

A.Plasticity index

B.Liquidity index

C.Flow index

D.Shrinkage index

Answer: B.Liquidity index

Reference ID:(1674) Which one of the following is correct formula for the calculation of angularity numberof aggregates?

A.67% – percent solid volume

B.33% – percent solid volume

C.50% – percent solid volume

D.30% – percent solid volume

Answer: A.67% – percent solid volume

MazhiNaukri.in

Reference ID:(2698) A हे B चे आजोबा आहेत. B िह C ची बिहण आहे. C ही D ची मुलगी आहे. D हा E चा पती आहे. Bचे E बरोबर काय नाते आहे?

A is grandfather of B. B is sister of C. C is daughter of D. D is husband of E. How isB related to E?

A.बिहण A.Sister

B.सून B.Daughter-in-law

C.मुलगी

C.Daughter

D.आई D.Mother

Answer: C.मुलगी C.Daughter

Reference ID:(1694) When the declination of magnetic bearing is towards west then, ____

A. When the declination of magnetic bearing is towards west then, ____

B. True bearing = magnetic bearing – declination

C. True bearing + magnetic bearing = declination

D. None of the above

Answer: B. True bearing = magnetic bearing – declination

Reference ID:(1198) The co-efficient of discharge for orifice meter compared to that for a venturimeter is____

MazhiNaukri.in

A. Higher

B. Much smaller

C. Much higher

D. Can’t be compared

Answer: B. Much smaller

Reference ID:(1926) Fill in the blank: A shear stress in a given direction cannot exist without a balancing shear stress of

__________ intensity in a direction at right angles to it.

A.Equal

B.Lesser

C.Greater

D.May be lesser or greater

Answer: A.Equal

Reference ID:(1442) In case of Sink flow, fluid moves _______ towards a point where it disappears at aconstant rate.

A. Out radially

B. Inwards radially

C. Both Out radially and Inwards radially

MazhiNaukri.in

D. None of the above

Answer: B. Inwards radially

Reference ID:(1922) Consider the following statementsregarding proportionality limit of stress – straindiagram of mild steel

(i) : Stress at which stress- strain curve ceases to be a straight line (ii) : Stress at which extension ceases to be proportional to strain

A.Only statement (i) is correct

B.Only statement (ii) is correct

C.Both statement (i) & (ii) are correct

D.Both statement (i) & (ii) are incorrect

Answer: C.Both statement (i) & (ii) are correct

Reference ID:(1162) As per IS 800:2007, the maximum width of the covered building section shouldpreferably be restricted to ________ beyond which suitable provisions for theexpansion joint may be made.

A. 125m

B. 150m

C. 175m

D. 200m

Answer: B. 150m

MazhiNaukri.in

Reference ID:(2198) What is maximum value of clear spacing of intermittent fillet weld in the case ofcompression member?

A.12 t but in no case be more than 200mm

B.16 t but in no case be more than 200mm

C.20 t but in no case be more than 100mm

D.24 t but in no case be more than 100mm

Answer: A.12 t but in no case be more than 200mm

Reference ID:(2670) Select the words that best fit the blank: I decided to drop out of college, but thatdidn't ____________me from establishing my own company .

A.Provide

B.Avoid

C.Stop

D.Desire

Answer: C.Stop

Reference ID:(2414) Which one of the following type of conflict can occur at an intersection?

A.Crossing conflict

B.Merging conflict

C.Diverging conflict

MazhiNaukri.in

D.All the other options

Answer: D.All the other options

Reference ID:(1686) Which of the following indicates the rate of loss in shearing of soil mass uponincrease in water content?

A. Plasticity index

B. Shrinkage index

C. Toughness index

D. Flow index

Answer: D. Flow index

Reference ID:(2446) ��ाखाली िदले�ा पया�यातून ��ातील �णीचंा यो� अथ� िनवडा. गाढवांचा गोधंळ, लाथांचा सुकाळ

A.मूख� लोक एक� आ�ावर मूख�पणाचेच कृ� करतात.

B.एक� आलेली गाढवे एकमेकांना लाथा मारायला सु�वात करतात कारण ते चेकाळलेले असतात.

C.मूख� लोक एक� आ�ावर एकेमेकांना लाथा मारायला सु�वात करतात कारण ते चेकाळलेलेअसतात.

D.मूख� लोक एक� आ�ावर एकेमेकांना लाथा मारणे बंद करतात कारण ते सगळेच मूख� असतात.

Answer: A.मूख� लोक एक� आ�ावर मूख�पणाचेच कृ� करतात.

Reference ID:(2418) Which one of the following is /are type of traffic island?

MazhiNaukri.in

A.Divisional island

B.Channelizing island

C.Pedestrian loading island & rotary

D.All the other options

Answer: D.All the other options

Reference ID:(1950) Which one of the following is correct sequence of the total reaction time taken bythe driver?

A.Perception → intellection → volition → emotion

B.Perception → intellection → emotion → volition

C.intellection→Perception →emotion →volition

D.volition→ intellection→emotion→Perception

Answer: B.Perception → intellection → emotion → volition

Reference ID:(1166) Which of the following is the chemical technique directed towards the destabilisationof the charged colloidal particles?

A. Coagulation

B. Flocculation

C. Filtration

D. Sedimentation

Answer: A. Coagulation

MazhiNaukri.in

Reference ID:(1698) Which one of the following is characteristics of bacterial concrete ?

A. auto crack healing capacity

B. useful in polluted environment

C. affected in polluted environment

D. None of the above

Answer: A. auto crack healing capacity

Reference ID:(2678) Since the ancient Greeks maintained that the earth was round and great navigatorslike Columbus and Magellan demonstrated that this assertion was true, nogeographical discovery has been more important than, what we all are beginning tounderstand today, that our planet has exceedingly restricted dimensions.

The author is most likely to agree with which of the following statements?

A.The space enveloping the earth is vast and limitless.

B.There is a limit to all resources.

C.That we exist in a progressively shrinking universe.

D.Mankind, in the limited space allotted, can lead a happy life.

Answer: B.There is a limit to all resources.

Reference ID:(1682) If the void ratio of a soil sample is 0.8, then the value of (0.5 x porosity) will be ____

A. 0.22

B. 0.44

C. 0.33

MazhiNaukri.in

D. 0.66

Answer: A. 0.22

Reference ID:(1410) Flow-mass curve is an integral of which of the following?

A. The hydrograph

B. The S-curve

C. The hyetograph

D. The flow duration curve

Answer: A. The hydrograph

Reference ID:(1906) What shall be the classification of soil if the relative density of sandy soil lies inbetween 50-70%?

A. very loose

B. medium dense

C. loose

D. Highly dense

Answer: B. medium dense

MazhiNaukri.in

Reference ID:(2154) A fluid , in which shear stress is more than the yield value and shear stress isproportional to the rate of shear strain is called ____

A.Ideal fluid

B.Real fluid

C.Newtonian fluid

D.Ideal plastic fluid

Answer: D.Ideal plastic fluid

Reference ID:(2942) दरवष� मराठी भाषा िदवस _____ ला साजरा केला जातो.

Marathi Language Day is celebrated on _____every year.

A.27 फे�ुवारी A.February 27

B.27 माच� B.March 27

C.1 मे C.May 1

D.27 मे D.May 27

Answer: A.27 फे�ुवारी A.February 27

Reference ID:(1678) Which of the following relation between Fore Bearing (FB) and Back Bearing (BB) isTRUE?

A. BB = FB ± 180

B. BB = FB + 360

0

0

MazhiNaukri.in

C. BB = FB - 360

D. BB – FB = 0

Answer: A. BB = FB ± 180

Reference ID:(1914) If the permissible value of stress in tension on section through throat of butt weld(done in shop) is 150 N/mm then , the permissible stress in tension on samesection when the same welding is done in the field is ______ N/mm

A.100

B.120

C.150

D.187.5

Answer: B.120

Reference ID:(1422) The free mean speed on a roadway is found to be 80 kmph. Under stoppedcondition the average spacing between vehicles is 8 m. The capacity flow (per lane)will be ____

A. 2500 vehicles/hour

B. 5000 vehicles/hour

C. 7500 vehilces/hour

D. 10000 vehicles/hour

0

0

0

2

2

MazhiNaukri.in

Answer: A. 2500 vehicles/hour

Reference ID:(1446) The radius of 2 curve in design of tracks will be ____

A. 573 m

B. 860 m

C. 1719 m

D. 2292 m

Answer: B. 860 m

Reference ID:(2166) For reinforced concrete of M20 grade, the minimum value of cement content(Kg/m ) & maximum value of free water cement ratio, respectively are ____

A.300 & 0.55

B.300 & 0.6

C.320 & 0.55

D.340 & 0.45

Answer: A.300 & 0.55

Reference ID:(1406) A line joining points is called an isohyets when the points are having ____

A. Equal height above MSL

0

3

MazhiNaukri.in

B. Equal barometric pressure

C. Equal rainfall depth in a given duration

D. Equal evaporation value

Answer: C. Equal rainfall depth in a given duration

Reference ID:(2922) खालीलपैकी कोणता पया�य यो� आहे?

Which of the following is correct?

A.जर A = 1, B = 2, C = 3, …. Z = 26, तर {S + U + B} = {C + A + T} A.If A = 1, B = 2, C = 3, …. Z = 26, then {S + U + B} = {C + A + T}

B.जर A = 1, B = 2, C = 3, …. Z = 26, तर {M + A + C + E} > {E + G + G} B.If A = 1, B = 2, C = 3, …. Z = 26, then {M + A + C + E} > {E + G + G}

C.जर A = 1, B = 2, C = 3, …. Z = 26, तर {T + A + P} = {S + U + B} C.If A = 1, B = 2, C = 3, …. Z = 26, then {T + A + P} = {S + U + B}

D.जर A = 1, B = 2, C = 3, …. Z = 26, तर {D + U + N + E} < {F + L + Y} D.If A = 1, B = 2, C = 3, …. Z = 26, then {D + U + N + E} < {F + L + Y}

Answer: B.जर A = 1, B = 2, C = 3, …. Z = 26, तर {M + A + C + E} > {E + G + G} B.If A = 1, B = 2, C = 3, …. Z = 26, then {M + A + C + E} > {E + G + G}

Reference ID:(1154) The value of Possion’s ratio in the formula of calculation of radius of relativestiffness for design of rigid pavement is taken as

A.0.15

B.1.5

C.0.1

D.1

MazhiNaukri.in

Answer: A.0.15

Reference ID:(1186) To control air pollution, ______ has the capacity to remove least size of particles.

A. Wet Scrubbers

B. Electrostatic precipitator

C. Fabric filters

D. Gravitational Settling chambers

Answer: C. Fabric filters

Reference ID:(1450) For maximum power transmission through nozzle , diameter of nozzle, d should beequal to _______. Where, d = diameter of the pipe, L = Length of the pipe, f = co-efficient of friction for pipe.

A. (D /2fl)

B. (D /4fl)

C. (D /8fl)

D. (D /16fl)

Answer: C. (D /8fl)

5 1/4

5 1/4

5 1/4

5 1/4

5 1/4

MazhiNaukri.in

Reference ID:(2182) The maximum diameter of reinforcing bar of slab should be limited to ____

A.1/8th of the total thickness of the slab

B.1/4th of the total thickness of the slab

C.2/5th of the total thickness of the slab

D.None of the above

Answer: A.1/8th of the total thickness of the slab

Reference ID:(1194) The relationship between kinematic viscosity and dynamic viscosity is ____

A. Kinematic viscosity = dynamic viscosity x density

B. Kinematic viscosity = dynamic viscosity/density

C. Kinematic viscosity = dynamic viscosity x specific gravity

D. Kinematic viscosity = dynamic viscosity / specific gravity

Answer: B. Kinematic viscosity = dynamic viscosity/density

Reference ID:(1170) Primarily, Bangalore method of Composting is

A. aerobic in nature

B. anaerobic in nature

C. Both Aerobic and anaerobic in nature

MazhiNaukri.in

D. Neither aerobic nor anaerobic in nature

Answer: B. anaerobic in nature

Reference ID:(2410) Which one of the following factors affects the road user characteristics?

A.Physical

B.Mental

C.Psychological & Environment

D.All of the above

Answer: D.All of the above

Reference ID:(2902) 5 लोक 1, 2, 3, 4 आिण 5 �ा �थानी रांगेत उभे आहेत. िकमान 2 लोक D आिण E �ा समोर उभेआहेत. A हा C �ा पुढेच उभा आहे. C आिण B दर�ान दोन लोक उभे आहेत. E हा 5 �ा �थानीउभा नाही. चौ�ा �मांकावर कोण उभा आहे?

5 people are standing in a queue in positions 1, 2, 3, 4 and 5. There are atleast 2people standing in front of D and E. A stands immediately ahead of C. There aretwo people standing between C and B. E is not standing in the 5th position. Whostands in 4th position?

A.A िकंवा C A.A or C

B.D

B.D

C.E C.E

D.D िकंवा E D.D or E

MazhiNaukri.in

Answer: D.D िकंवा E D.D or E

Reference ID:(2694) एक माणूस आप�ा घरापासून चाल�ास सु� करतो आिण 6 िक.मी. दि�ण िदशेला चालतो. मग तोडावीकडे वळून आिण 4 िक.मी. चालतो. मग तो उजवीकडे वळतो आिण 1 िक.मी. चालतो. मग तोउजवीकडे वळतो आिण 3 िक.मी. चालतो. मग तो उजवीकडे वळतो आिण 4 िक.मी. चालतो. मग तोडावीकडे वळतो आिण 1 िक.मी. चालतो. �ा�ा घरापासून तो िकती िक.मी. दूर आहे?

A man starts from his house and walks 6 k.m. in South direction. He then turns leftand walks 4 k.m. He then turns right and walks 1 k.m. He then right and walks 3k.m. He then turns right and walks 4 k.m. He then turns left and walks 1 k.m. Howfar is he from his house?

A.3 िक.मी. A.3 k.m.

B.2.414 िक.मी.

B.2.414 k.m.

C.2.732 िक.मी. C.2.732 k.m.

D.3.5 िक.मी.

D.3.5 k.m.

Answer: A.3 िक.मी. A.3 k.m.

Reference ID:(2930) �धानमं�ी फसल बीमा योजना (पीएमएफबीवाय) भारत सरकार�ारे _______ वषा�त सु� कर�ातआली.

Pradhan Mantri Fasal Bima Yojna (PMFBY) was launched by Government of Indiain year ____

A.2014 A.2014

B.2015 B.2015

MazhiNaukri.in

C.2016 C.2016

D.2017 D.2017

Answer: C.2016 C.2016

Reference ID:(2690) X चे दि�ण िदशेला तोडं आहे. तो 45 अंश उजवीकडे वळतो. मग तो 90 अंश डावीकडे वळतो. मगतो 180 अंश वळतो. शेवटी तो डावीकडे 45 अंश वळतो. मग तो परत 180 अंश वळतो. आता तोकोण�ा िदशेला तोडं क�न उभा आहे?

X is facing South. He turns 45 degree right. Then he turns 90 degree left. He thenturns 180 degree. He then turns 45 degree left. He then again turns 180 degree.Which direction is he now facing?

A.पूव� A.East

B.पि�म

B.West

C.उ�र पि�म C.North West

D.दि�ण पूव�

D.South East

Answer: A.पूव� A.East

Reference ID:(2186) The strength of compression member with helical reinforcement ___________ thestrength of similar member with lateral ties.

A.1.05 times

B.1.1 times

C.1.15 times

MazhiNaukri.in

D.1.2 times

Answer: A.1.05 times

Reference ID:(1658) Which of the following type of loss is NOT categorized as minor losses in pipe?

A. Loss due to friction

B. Loss due to sudden expansion of pipe

C. Loss due to bend in pipe

D. Loss due to obstruction in pipe

Answer: A. Loss due to friction

Reference ID:(2910) �� िच�ा�ा जागी �मांक शोधा:: 1, 5, 4, 10, 9, 15, 16, ?, 25, 25

Find the missing term: 1, 5, 4, 10, 9, 15, 16, ?, 25, 25

A.19 A.19

B.17 B.17

C.20 C.20

D.25 D.25

Answer: C.20 C.20

MazhiNaukri.in

Reference ID:(2442) पुढीलपैकी कोणते ि�यापद िवशेषण सािधत आहे?

A.िपसाटणे

B.कुचकरणे

C.खुणावणे

D.सुरकुतणे

Answer: A.िपसाटणे

Reference ID:(1938) Indian Road Congress (IRC) was formed in ____

A.1929

B.1934

C.1950

D.1964

Answer: B.1934

Reference ID:(2906) �� िच�ा�ा जागी �मांक शोधा:: 10, 100, 200, 310, ?

Find the missing term: 10, 100, 200, 310, ?

A.400 A.400

B.410 B.410

C.420 C.420

MazhiNaukri.in

D.430 D.430

Answer: D.430 D.430

Reference ID:(1426) In a rigid pavement, let the load stress, warping stress and frictional stresses are210 MPa, 250 MPa and 10 MPa respectively. The critical combination of stresses atedge region during Summer is ____

A. 450 MPa

B. 460 MPa

C. 440 MPa

D. 470 MPa

Answer: A. 450 MPa

Reference ID:(1438) ______ is the most suitable water distribution system for localities which expandirregularly and where the water pipes have to be laid at random due to the absenceof any planned full fledged road network?

A. Tree system

B. Interlaced system

C. Circular system

D. Radial system

MazhiNaukri.in

Answer: A. Tree system

Reference ID:(2426) A soil specimen has a water content of 10% and a wet unit weight of 20 kN/m , thedry unit weight will be ____

A. 16.16 kN/m

B. 17.17 kN/m

C. 18.18 kN/m

D. 19.19 kN/m

Answer: C. 18.18 kN/m

Reference ID:(2674) What is the meaning of the idiom: Hit the sack

A.To endure a painful or unpleasant situation that is unavoidable

B.Euphemism for dying or death

C.To delay or avoid talking about something difficult or unpleasant

D.To go to bed

Answer: D.To go to bed

Reference ID:(2190) The group index value of soil mass & quality of soil are ____

A. directly proportional

B. indirectly proportional

3

3

3

3

3

3

MazhiNaukri.in

C. not related to each other

D. none of the above

Answer: B. indirectly proportional

Reference ID:(1178) For water, 10 mg/l = ____

A. 1 ppm

B. 10 ppm

C. 100 ppm

D. 1000 ppm

Answer: B. 10 ppm

Reference ID:(2162) Bourdon tube pressure gauge is an example of ____

A.Piezometer

B.U-tube manometer

C.Differential manometers

D.Mechanical gauge

Answer: D.Mechanical gauge

MazhiNaukri.in

Reference ID:(2178) What is upper limit of maximum area of tension reinforcement for beams? Where, b = breadth of beam

D = Overall depth of beam

A.0.04 bD

B.0.03 bD

C.0.02 bD

D.0.01 bD

Answer: A.0.04 bD

Reference ID:(2950) राजमाची िक�ा _____ जवळ आहे

Rajmachi Fort is near _____

A.लोणावळा A.Lonavala

B.महाबळे�र B.Mahabaleshwar

C.गणपतीपुळे

C.Ganapatiphule

D.अिलबाग D.Alibaug

Answer: A.लोणावळा A.Lonavala

Reference ID:(2174) The value of design bond stress in limit state method for deformed bars shall beincreased by ______ percent of design bond stress for plain bar in tension?

A.60

B.25

MazhiNaukri.in

C.50

D.15

Answer: A.60

Reference ID:(1930) If the value of minor tensile stress is 10 N/mm & radius of mohr circle is 20 N/mm ,then what will be the magnitude of major principle stress?

A.150N/mm

B.100N/mm

C.200N/mm

D.50 N/mm

Answer: D.50 N/mm

Reference ID:(2926) जर $ �णजे गुणाकार आिण % �णजे बेरीज असेल, तर खालीलपैकी कोणता पया�य सवा�त मोठाआहे?

If $ stands for multiplication and % stands for addition, which of the following is thelargest?

A.12 $ 8 % 11 A.12 $ 8 % 11

B.12 % 9 $ 17 B.12 % 9 $ 17

C.11 $ 7 % 29 C.11 $ 7 % 29

D.14 % 11 $ 15 D.14 % 11 $ 15

Answer: D.14 % 11 $ 15 D.14 % 11 $ 15

2 2

2

2

2

2

2

MazhiNaukri.in

Reference ID:(2438) समानाथ� श� ओळखा: अवष�ण

A.�िति�या

B.पारेषण

C.दु�ाळ

D.सुकाळ

Answer: C.दु�ाळ

Reference ID:(1414) The surveying is conducted in order to determine the boundaries of fields, estates,houses is ____

A. Topographical surveying

B. Cadastral surveying

C. City surveying

D. Engineering surveying

Answer: B. Cadastral surveying

Reference ID:(2658) Which of the following is closest in meaning to the word: Susceptible

A.Vulnerable

B.Invincible

C.Jovial

MazhiNaukri.in

D.Triumphant

Answer: A.Vulnerable

Reference ID:(2170) The value of maximum shear stress in strength of material subject is given by

A.Average value of principle stresses

B.Differences of principle stresses

C.One –half the differences of principle stresses

D.Summations of principle stresses

Answer: C.One –half the differences of principle stresses

Reference ID:(1158) In Brick work, each course is comprised of alternate headers and stretchers in________.

A. Stretcher bond

B. Header bond

C. Flemish bond

D. English bond

Answer: C. Flemish bond

MazhiNaukri.in

Reference ID:(2430) When the fluid is at rest, the shear stress is ____

A. Positive

B. Negative

C. Zero

D. Varying from positive to negative

Answer: C. Zero

Reference ID:(1946) The height of mountable type kerbs , semi barriers type kerbs, barriers type kerbsabove the pavement edge, respectively are ____

A.10cms, 15cms & 20cms

B.15cms, 20cms & 25cms

C.20cms , 15cms& 10cms

D.20cms , 25cms & 15cms

Answer: A.10cms, 15cms & 20cms

Reference ID:(1418) The point where Contour lines are meeting, indicates a ____

A. Depression

B. Vertical cliff

C. Summit

MazhiNaukri.in

D. Saddle

Answer: B. Vertical cliff

Reference ID:(2934) खालीलपैकी कोणाचा संबंध "ई.पी.एफ.ओ" शी आहे?

Which one of the following is related to “EPFO” ?

A.कम�चा�यांना वै�कीय सुिवधा पुरिवणे. A.Providing Medical Facilities to Employees.

B.कम�चा�यांना िनवृ�ी वेतन आिण भिव� िनवा�ह िनधी सुिवधा पुरिवणे.

B.Providing Pensions and Provident Fund facilities to Employees

C.कम�चा�यांना गृहिनमा�ण सुिवधा पुरिवणे C.Providing Housing Facilities to Employees

D.कम�चा�यांना वाहतूक सुिवधा पुरिवणे

D.Providing Transport Facilities to Employees

Answer: B.कम�चा�यांना िनवृ�ी वेतन आिण भिव� िनवा�ह िनधी सुिवधा पुरिवणे. B.Providing Pensions and Provident Fund facilities to Employees

Reference ID:(2662) Which of the following is closest in meaning to the word: Triumphant

A.Strong

B.Victorious

C.Tired

D.Poisonous

Answer: B.Victorious

MazhiNaukri.in

Reference ID:(1174) In case of stable equilibrium of a floating body, ______( B = Centre of buoyancy, M= meta-centre, G = Centre of gravity)

A. M should be above G

B. M should be below G

C. B should be above G

D. B should be below G

Answer: A. M should be above G

Reference ID:(2402) Which one of the following post- tensioning systems are based on wedge – action?

A.Freyssinet

B.Gifford – Udall

C.Hoyer`s long line system

D.Both Freyssinet and Gifford – Udall

Answer: D.Both Freyssinet and Gifford – Udall

Reference ID:(2158) The pressure which is measured with the help of a pressure measuring instrument,in which the atmospheric pressure is taken as datum is called ____

A. Absolute pressure

B. Gauge pressure

MazhiNaukri.in

C. Vacuum pressure

D. Atmospheric pressure

Answer: B. Gauge pressure

Reference ID:(2938) इंिडयास ने� जेनेरेशन हाय �ुपुट क�ुिनकेशन उप�ह, जीएसएटी -11 िडस�बर 5, 2018 रोजीयश�ी�र�ा .............. येथे लॉ� कर�ात आला.

India’s next generation high throughput communication satellite, GSAT-11 wassuccessfully launched on December 05, 2018 from ………………..

A.सतीश धवन �ेस स�टर शार, �ीह�रकोटा. A.Satish Dhawan Space Centre SHAR, Sriharikota.

B.को� लॉ� बेस, �� च गुएना

B.Kourou launch base, French Guiana

C.िव�म साराभाई �ेस स�टर, केरळ C.Vikram Sarabhai Space Centre, Kerala

D.केप केनवरल एयर फोस� �ेशन, �ो�रडा

D.Cape Canaveral Air Force Station, Florida

Answer: B.को� लॉ� बेस, �� च गुएना B.Kourou launch base, French Guiana

Reference ID:(2654) िव��दाथ� श� ओळखा: �ारंभ

A.अ�

B.सु�वात

C.पूवा�ध�

D.प�रचय

MazhiNaukri.in

Answer: A.अ�

Reference ID:(2406) Which one of the following is minimum standardized value of transverse skidresistance for design purpose?

A.0.15

B.0.35

C.0.4

D.0.2

Answer: A.0.15

Reference ID:(2666) Which of the following is opposite in meaning to the word: Conceal

A.Hide

B.Escape

C.Expose

D.Casual

Answer: C.Expose

Reference ID:(2946) पुढीलपैकी कोणते िठकाण मंुबई�ा सवा�त जवळ आहे? (र�ाने)

Which of the following is closest (road distance) to Mumbai?

A.पंचगणी A.Panchagani

B.औरंगाबाद

B.Aurangabad

MazhiNaukri.in

C.िशड� C.Shirdi

D.अिलबाग D.Alibaug

Answer: D.अिलबाग D.Alibaug

Reference ID:(2918) अिमत, बाला, िचंटू, डॅनी, गणेश आिण लोकेश हे एका ओळीत अिमत पासून लोकेश पय�त �मानेउभे राहतात. �ां�ा म�े असणारे अंतर खाली िदले आहेत.

अिमत ते िचंटू - 50 मी बाला ते डॅनी - 75 मी

अिमत ते गणेश - 150 मी बाला ते लोकेश - 190 मी डॅनी ते गणेश - 45 मी

कोण�ा दोन लोकांमधील अंतर सवा�त कमी आहे? Amit, Bala, Chintu, Danny, Ganesh and Lokesh stand in a line, in the order fromAmit to Lokesh. Distances between them are given below.

Amit to Chintu - 50 mts. Bala to Danny - 75 mts. Amit to Ganesh - 150 mts.

Bala to Lokesh - 190 mts. Danny to Ganesh - 45 mts.

Between which two people is the distance minimum?

A.अिमत बाला A.Amit Bala

B.गणेश लोकेश B.Ganesh Lokesh

C.बाला िचंटू

C.Bala Chintu

D.डॅनी गणेश D.Danny Ganesh

Answer: C.बाला िचंटू C.Bala Chintu

MazhiNaukri.in

Reference ID:(2914) राम जवळ �ाम पे�ा 25 �पये जा� आहेत. �ाम जवळ आकाश पे�ा 50 �पये कमी आहेत.आिण आकाश जवळ िवमल पे�ा 20 �पये जा� आहेत. तर पुढीलपैकी कोणते िवधान बरोबरआहे?

(A) राम कडे िवमल पे�ा 15 �पये कमी आहेत. (B) िवमल कडे �ाम पे�ा 50 �पये कमी आहे.

Ram has 25 rupees more than Shyam; Shyam has 50 rupees less than Akash andAkash has 20 rupees more than Vimal. Which of the following statement is true?

(A) Ram has 15 rupees less than Vimal (B) Vimal has 50 rupees less than Shyam

A.फ� A A.A only

B.फ� B B.B only

C.दो�ी A आिण B नाही C.neither A nor B

D.सांगू शकत नाही

D.Cant say

Answer: C.दो�ी A आिण B नाही C.neither A nor B

Reference ID:(2450) दररोज क� के�ावरच जेवण िमळते. �ा अथा�चा खालीलपैकी कोणता वाक�चार आहे.

A.मनात मांडे खाणे

B.हातावर पोट असणे

C.हातचा मळ असणे

D.हात पसरणे

Answer: B.हातावर पोट असणे

Reference ID:(2434) खाली िदले�ा पया�यातून यो� श�लेखन असलेला पया�य िनवडा.

MazhiNaukri.in

A.�ेशदायक

B.कले�दायक

C.�ेशदायाक

D.कलेशदायक

Answer: A.�ेशदायक

Reference ID:(1666) The delta for a crop having a base period of 120 days when its duty is 864hectares/cumec on the field will be ____

A. 1 m

B. 1 cm

C. 1.2 m

D. 1.2 cm

Answer: C. 1.2 m

Reference ID:(1690) Which of the following type of support restrains complete movement of the beamboth in position as well as direction?

A. Roller support

B. Pinned support

C. Hinged support

MazhiNaukri.in

D. Fixed support

Answer: D. Fixed support

Reference ID:(2422) As per Westergaard's concept , which one of the following is/are type (s) of stressproduced due to temperature in a concrete pavement ?

(i) Warping stress (ii) Frictional stress

A.Only (i)

B.Only (ii)

C.Both (i) & (ii)

D.Neither (i) nor (ii)

Answer: C.Both (i) & (ii)

Reference ID:(1670) The cross drainage structure reverse of aqueduct is ____

A. Syphon

B. Aqueduct

C. Superpassage

D. Aqueduct siphon

MazhiNaukri.in

Answer: C. Superpassage

Reference ID:(1918) Maximum size of a fillet weld in the case of weld applied to the round toe of steelsections is equals to ____

A. 3/4th of the thickness of the section at the toe

B. 4/5th of the thickness of the section at the toe

C. 1/2th of the thickness of the section at the toe

D. 7/8th of the thickness of the section at the toe

Answer: A. 3/4th of the thickness of the section at the toe

Reference ID:(1434) Regarding fire demand, for cities having population of 64,000 , the Kilo litre of waterrequired will be ____

A. 64

B. 80

C. 640

D. 800

Answer: D. 800

Reference ID:(1430) Which one of the following apparatus is used to conduct the flash & fire point test ?

A.Pensky Marten closed cup apparatus

MazhiNaukri.in

B.Pycnometer

C.Orifice type viscometer

D.None of the above

Answer: A.Pensky Marten closed cup apparatus

MazhiNaukri.in