STONEWARE
bad terminations.
• Twice as fast. Five times as enduring. • Diamond dust vacuum
-sintered crown providing high resistance to detachment.
For natural and artificial stones, ceramics, porcelanite, etc. the
central guiding drill should be withdrawn and substituted by the
guiding stand suction pad. On materials where suction pad would not
adhere (concrete, brick, etc.) the central guiding drilling crown
must be used.
We recommend using with water and unselecting the percussion drill
function.
CROWNS KIT FOR ALL KIND OF MATERIALS
Granite • Marble • Silestone • Ceramic • Porcelanite Concrete •
Brick • Terrazzo • Plaster Board
Nº1 Seven crowns kit. Hex
Nº2 Three Crowns kit. Hex Nº3 Three Crowns kit. Hex
D IA
M O
N D
D IS
C S
FO R
G R
IN D
ER S
A N
D C
O N
ST R
U CT
IO N
P O
W ER
T O
O LS
RECTIFICATION
Ø 4mm (0,16”) - 5mm (0,20”1/5) - 6mm (0,24”) - 7mm (0,28”) - 8mm
(0,32”) 10mm (0,39”) y 12mm (1/2”) Includes suction pad stand with
central guiding drill system and water pump
Ø 25mm (0,79”) - 30mm (1,2”) y 35mm (1,4”) Including: • Suction pad
stand with central guiding drill system • Aluminum case • Water
pump
Ø 57mm (2,2”) - 70mm (2,8”) y 83mm (3,3”) Including: • Suction pad
stand with central guiding drill system • Aluminum case • Water
pump
We recommend using with water and unselecting the percussion drill
function.
2 0 1 0 - 2 0 1 1
LASER WELDING
STATE OF THE ART TECHNOLOGY
STATE OF THE ART TECHNOLOGY
Calle Sierra de Cazorla, 7 Área Empresarial Andalucía - Sector 1
28320 Pinto (Madrid) Spain Tel: (+34) 91 691 86 30 Tel Export.:
(+34) 91 691 85 16 Fax: (+34) 91 691 91 72 email:
[email protected] www.grupostayer.comST
A YE
R IB
ER IC
A , S
A . 36035 Marano Vicentino (VI) Italy
Via Palladio, 30 Tel: (+39) 0445 621 244 Fax: (+39) 0445 623 419
email:
[email protected] www.stayeritalia.com
ST A
YE R
IT A
LI A
s rl
LÍ N
EA P
R EM
IU M
UNIVERSAL BÁSICO (UNIVERSAL BASIC)
Ø 115mm (4 1/2”) - 125mm (5”) - 180mm (7”) - 230mm (9”) - 300mm
(12”) - 355mm (14”) The best price competitive segment disc for
cutting materials of medium-low hardness and abrasiveness.
LÁSER GRANITO (GRANITE LASER)
Ø 115mm (4 1/2”) - 125mm (5”) - 150mm (6”) - 180mm (7”) - 230mm
(9”) - 300mm (12”) Designed for hard materials and stone cutting.
The hardness and quality of its diamond dust provides a high speed
cut. The 300 mm (12”) disc for stand-up machines is 10 mm (0,39”).
high, with a centre hole of 25.4 mm.
LÁSER HORMIGÓN (CONCRETE LASER)
Ø 115mm (4 1/2”) - 125mm (5”) - 150mm (6”) - 180mm (7”) - 230mm
(9”) Designed for concrete and other abrasive materials cutting:
Cement, prefab. concrete, old concrete and highly abrasive
materials. The high diamond concentration plus the use of W and CW
hardeners provides the segments a strong resistance wearing out.
Available: 230 mm (9”) diameter, 12 mm (1/2”) segment height. Ref:
PS2.
PAVIMENTO (PAVEMENT)
Ø 300mm (12”) - 350mm (13,8”) Designed for pavement cutting, either
old or fresh concrete or tarmac on concrete. High cutting speed and
average endurance on fresh concrete. Reinforced segments laser
welded.
• Available special high performance disc for each
application.
LÁSER VULCAN (VULCAN LASER)
Ø 115mm (4 1/2”) - 230mm (9”) 10 mm (0,39”) high diamond
segments.
A disc combining high cutting speed on hard materials, good
endurance and a competitive price within the laser welded discs
range.
a) The holes on the steel frame provide excellent cooling, holding
back disk heating. b) Applicable to all kind of construction
materials and stone.
LÁSER ARCE GRANITO / LÁSER TURBO (GRANITE ARCE LASER / TURBO
LASER)
Ø 115mm (4 1/2”) - 125mm (5”) - 150mm (6”) - 180mm (7”) - 230mm
(9”) 10 mm (0,39”) high diamond segments.
Ø 300mm (12”) - 350mm (13,8”) 10 mm (0,39”) high diamond
segments.
The fastest cutting disc on granite and hard materials. a) The
slots between the diamond segments supply a faster cut, a better
waste riddance as
well as improved disc cooling. b) The high harness and the size of
the diamond dust mesh (30/40) increases cutting speed. c) The
crenulated-segments diamond disc must never be used for stone
roughing. d) Unlike the Laser Arce disc, the Turbo laser segments
are straight instead of slanted.
The metal bound is both less hard and dense, allowing a faster
cutting, albeit a reduced endurance.
CANTERO (CANTERO)
Ø 115mm (4 1/2”) - 125mm (5”) - 180mm (7”) - 230mm (9”) 12 mm
(1/2”) high diamond segments.
Ø 350mm (13,8”) 15 mm (3/8”) high diamond segments and a Ø60 mm
(2,36”) central gauge.
The best quarry disc in the market. Combines the highest speed and
cutting capabilities with a good endurance and a competitive price.
Available in Ø230 mm (9”) with 15 mm (3/8”) high diamond
segments
TURBO HURACÁN (HURACAN TURBO)
Ø 115mm (4 1/2”) - 125mm (5”) 10 mm (0,39”) high diamond
segments.
Ø 230mm (9”) 12 mm (1/2”) high diamond segments.
Designed for granite and hard materials cutting. The continuous
crenulated crown performs better terminations. The special design
of the steel frame provides better cooling, holding back disk
heating.
LÁSER HURACÁN (HURACAN LASER)
Ø 115mm (4 1/2”) - 125mm (5”) - 230mm (9”) 10 mm (0,39”) high
diamond segments.
The fastest and best cutting disc of the market for all kind of
construction materials and stone. Suitable for extremely hard
materials: reinforced concrete, granite, iron stoneware, klinker...
Features:
a) We use diamond dust coated with titanium to achieve a better
adherence of the diamond grain to the metal junction, to guarantee
a high speed cut of extremely hard materials.
b) The holes on the steel frame, smaller as they approach the
centre of the disk provide excellent cooling, holding back disk
heating.
c) The crenels on the front of the diamond segment allow a faster
start and an easy cut.
TURBO CONSTRUCCIÓN (CONSTRUCTION TURBO)
Ø 115mm (4 1/2”) - 125mm (5”) - 180mm (7”) - 230mm (9”) The most
price competitive turbo disc, for cutting materials of medium
hardness and abrasiveness. The continuous and crenulated cutting
band allows a better termination when cutting on ceramic
materials.
LASER PROFESIONAL (PROFESSIONAL LASER)
Ø 115mm (4 1/2”) - 125mm (5”) - 180mm (7”) - 230mm (9”) - 300mm
(12”) - 350mm (13,8”) The market best selling disc. A perfect
combination of performance and cutting speed for construction
materials (cement, brick, terrazzo, stoneware, granite,
slate…)
TURBO PROFESIONAL (PROFESSIONAL TURBO)
Ø 115mm (4 1/2”) - 125mm (5”) - 180mm (7”) - 230mm (9”) - 250mm
(10”) - 300mm (12”) The best selling turbo disc in the market. The
unsegmented band and the crenulated shape of the turbo discs
perform improved terminations. Best combination of speed and
endurance in construction materials cutting: ceramic floor tiles
both large and small, stoneware, porcelain floor tiles
(porcelanite), terrazzo, brick, masonry, granite...
CERÁMICA BANDA CONTÍNUA (CERAMIC CONTINUE BAND)
Ø 115mm (4 1/2”) - 125mm (5”) - 150mm (6”) - 180mm (7”) - 200mm
(7,9”) - 230mm (9”) - 250mm (10”) - 300mm (12”) - 350mm (13,8”) The
most competitive price for a medium-low hard ceramic floor tiles
cutting.
TURBO PLUS REFORZADO “OLAS” (REINFORCED TURBO PLUS “WAVES”)
Ø 115mm (4 1/2”) - 125mm (5”) - 180mm (7”) - 230mm (9”) - 300mm
(12”) Designed for construction materials and concrete cutting. A
reinforced diamond crown performs deep cuts with better cooling, a
straighter cut and an extended endurance.
TURBO EXTRAFINO PORCELANATO (TURBO SUPERTHIN PORCELANATE)
Ø 115mm (4 1/2”) - 125mm (5”) - 150mm (6”) - 180mm (7”) - 230mm
(9”) - 250mm (10”) - 300mm (12”) The best results in porcelanite,
stoneware and generic ceramic materials cutting. This disc steel
frame and extra thin continuous crenulated crown provide perfect
terminations.
PORCELANATO SEGMENTADO (PORCELANATE)
Ø 115mm (4 1/2”) - 125mm (5”) - 150mm (6”) - 180mm (7”) - 230mm
(9”) - 250mm (10”) - 300mm (12”) - 350mm (13,8”) The best
termination for cuttings on porcelanite, stoneware and all kind of
ceramics. The slotted diamond crown improves cooling. The extra
thin ‘J’ shaped dented crown provides perfect terminations.
FÓRMULA INTERCOOLER (FORMULA INTERCOOLER)
Ø 115mm (4 1/2”) - 125mm (5”) - 180mm (7”) - 230mm (9”) With 12mm
(1/2”) diamond segments.
The best value for money Disc in the market: Advantages:
a) Using state of the art metallic and diamond dust, this Disc
achieves a fast and clean cut on hard materials, such as granite,
slate, terrazzo, stoneware, iron stoneware, fairface brick,
porcelain floor tiles (porcelanite), concrete...
b) The 12 mm (1/2”) diamond segments height extends disc endurance
as compared to the 7 mm (0,28”) high segments discs.
c) The slots between the diamond segments supply a faster cut, a
better waste riddance as well as improved disc cooling.
d) The holes on the steel frame improve cooling and reduce heating
when cutting.
new
Disc for Pavement Cutting
new
Ø 115mm (4 1/2”) - 125mm (5”) - 180mm (7”) - 230mm (9”) The most
price competitive turbo disc, of medium hardness and abrasiveness.
The continuous and crenulated cutting band allows a better
termination when cutting on ceramic materials.
new
