Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
www.QuiltingTreasures.com
Designed By: Wendy SheppardFor Quilting Treasures' Phantom of the Opera-Masquerade Collection
Finished Quilt Size: Approximately 48½" SquareFinished Block Size: 6"Number of Blocks: 12
Skill Level: Advanced
1THE PHANTOM OF THE OPERA ™
& ©1986 The Really Useful Group Ltd.
Backing
Masquerade
www.QuiltingTreasures.com 2
This pattern requires expert piecing skillsCapability to print or trace paper templatesPlease read through all instructions before cutting.
Cutting the Fabrics:
Note: Due to the on-point setting, it is advisable to leave the cutting of the border strips until the quilt center is constructed. That way, the exact length of the quiltcenter can be determined.
WOF = Width of Fabric
22414 VS: Violet/green stripe print fabric• Cut 2 strips @ 4 7/8” x WOF; sub cut 12 setting
triangles 4 ⅞” x @ 9 ¾" long. See the image below
22415 V: Purple tone-on-tone mask print fabric• Cut 1 strip @ 1 ½" x WOF; sub cut 13 squares
@ 1 ½", sashing squares• Cut 1 strip @ 2 5/8” x WOF, sub cut 2 squares
@ 2 5/8”, divide each twice diagonally for 8 side sashingtriangles, trim strip to 1 5/8” x WOF; sub cut 2 squares @ 1 5/8”, divide each once diagonally for 4 corner sashing triangles
• Cut 4 strips @ 1" x WOF; sub cut 2 @ 1" x 30 ¼" and2 @ 1" x 31 ¼" strips, inner border #1
• Cut 4 strips @ 1" x WOF; sub cut 2 @ 1" x 39 ¼" and2 @ 1" x 40 ¼" strips, inner border #3
• From remaining fabric cut 8 A, 8 B, 16 C, 16 D, 16 Eand 16 F (use pieced block templates)
22412 R: Red tone-on-tone filigree print fabric• Cut 8 A, 8 B, 8 C, 8 D, 8 E and 8 F (use pieced
block templates)
22411 E: Ladies print fabric• Cut 4 strips @ 4 ½" x WOF; sub cut 2 @ 4 ½" x 31 ¼"
and 2 @ 4 ½" x 39 ¼" strips, inner border #2
22412 H: Green tone-on-tone filigree print fabric• Cut 16 A and 16 B (use pieced block templates)• Cut 6 strips @ 2 ½” x WOF; join strips using diagonal
seams for the binding
22412 S: Gold tone-on-tone filigree print fabric• Cut 16 A, 16 B, 24 C, 24 D, 24 E and 24 F (use pieced
block templates)
22413 J: Feathers on black fabric• Cut 6 strips @ 1 ½" x WOF; sub cut 36 @ 1 ½" x 6 ½"
rectangles, sashing rectangles
KIT REQUIREMENTS12 Kits 18 Kits 24 Kits
Design: Yards Bolts Bolts Bolts22414 VS ½ 1 1 122415 V 1 1 2 222412 R ½ 1 1 122411 E ⅝ 1 1 222412 H ⅜ 1 1 122412 S 1 1 2 222413 J ⅜ 1 1 122410 M ¾ 1 2 222415 H (Binding) ½ 1 1 122409 M(Backing) 3¼ 4 6 8
Masquerade
22414 VS 22412 R22415 V 22411 E
22412 H 22413 J22412 S 22410 M
22409 M(Backing)
22415 H(Binding)
22410 M: Red big mask print fabric• Cut 5 strips @ 5" x WOF; sub cut 2 strips @ 5" x 40 ¼",
join the remaining 3 strips using diagonal seams; sub cut 2 @ 5" x 49 ¼", outer borders
Note: ¼" seam allowance unless noted otherwise
Pieced Block Assembly:(Using violet/green/gold block quadrant as an example)
1. It is advisable to mark on the wrong side of the cut pieces the seam allowance, and intersection points.
2. Sew together one gold tone-on-tone filigree "B" piece, one purple tone-on-tone mask print "F" piece, and one green tone-on-tone filigree "A" piece together to make sub-unit #1.
3. Sew together one purple tone-on-tone mask print "C" piece, one gold tone-on-tone filigree "E" piece and one purple tone-on-tone mask print "D" piece together to make sub-unit #2.
4. Since the overall seam between sub-unit #1 and sub-unit #2 is not straight, but rather angular, the individual seams will have to be handled separately, i.e. Pin and sew separately for each individual seam.
5. First pin and sew ONLY the seam between A and DWhen pinning, make sure the intersection points on sub-unit #1 match the intersection points on sub-unit #2 when pinning A to D. Sew A and D together up to the intersection point at the end of the seam. Backstitch.
6. Then re-adjust, pin and sew ONLY the seam between F and E, as outlined in the step above. Backstitch.
7. Repeat process to make a total of two gold/green/purple quadrants and two gold/purple quadrants.
8. Arrange and sew together all four quadrants to complete one block, see below. Repeat to make four blocks total
9. Repeat the process to construct the remainingblocks below.
www.QuiltingTreasures.com 3
Masquerade
Sub-Unit #1
Sub-Unit #2
Four Blocks
Four Blocks Two Blocks Two Blocks
Quilt Center Assembly:
1. Arrange and sew the blocks, sashing rectangles, sashing squares and triangles together. Make two of each assembly shown below.
2. Make one center sashing strip shown below:
* Please note that at this point, the portions of the purple tone-on-tone mask print squares and triangles will be "sticking out" at the outer edges. They will be trimmed later.
3. Sew the rows of blocks and sashing together asshown below.
4. Sew the two halves together with the center sashing strip as shown below:
5. Trim around the quilt center to include ¼" seam allow-ance. Due to the on-point setting, the quilt center should measure approximately 29 ¾” square.
Note: It is advisable to measure the length of the quilt center before cutting the subsequent border pieces.
Quilt Top Assembly:
Press all seams towards the border strip after it is sewn on
1. Inner border #1. Sew two 1" x 30 ¼" purple tone-on-tone mask print strips to the opposite sides of the quilt center. Sew two 1" x 31 ¼" purple tone-on-tone mask print strips to the remaining sides.
2. Inner border #2. Sew two 4 ½" x 31 ¼" ladies print strips to the opposite sides of the quilt center. Sew two 4 ½" x 39 ¼" ladies print strips to the remaining opposite sides.
3. Inner border #3. Sew two 1" x 39 ¼" purple tone-on-tone mask print strips to the opposite sides of the quilt center. Sew two 1" x 40 ¼" purple tone-on-tone mask print strips to the remaining sides.
www.QuiltingTreasures.com 4
Masquerade
4. Outer border. Sew two 5" x 40 ¼" red big mask print strips to the opposite sides of the quilt center. Sew two 5" x 49 ¼" red big mask print strips to the remaining sides to complete quilt top.
Finishing:
1. Cut the backing fabric into two equal lengths. Sew a 1” inch seam along the selvedge. Trim the seam allowance to ½” and press to one side. Trim the backing to measure 57” x 57”
2. Sandwich and baste quilt top, batting and backing together. Quilt as desired.
3. Binding with optional green tone-on-tone mask print binding strip.
While all possible care has been taken to ensure the accuracy of this pattern, we are not responsible for printing errors or the way in which individual work varies.
www.QuiltingTreasures.com 5 Not For Resale/Summer 2012
Masquerade
Masquerade Templates