BSI

REGISTERE

D

BS EN ISO 9001 : 2000

MANUFACTURER OF PRECISIONBALL/ROLLER & SPECIAL BEARINGS

17590 phoneix brochure 6/8/03 12:21 PM Page 1

BEARINGSBased in the UK and ISO9001:2000 accredited, Phoenix bearings design andmanufacture ball and cylindrical roller bearings. All bearings are manufactured fromhigh integrity materials and machined brass cages are standard. We offer imperialand metric bearings ranging from 2 3/4” and 100mm to well over 40” and 1.2m indiameter.

Phoenix bearings have established a reputation for flexible production, tailored tocustomer’s requirements with short lead times (maximum 8 weeks to manufacture).

Phoenix bearings also have a full range of SL series “full complement” bearings,roller assemblies, cylindrical roller thrust bearings and duplex ball bearings.

INDUSTRIESSteel Making • Mining • Paper and Board making • Textiles • Power Generation • Quarrying / Crushing and Mineralprocessing • Brickmaking • Materials handling / Conveyors.

APPLICATIONSSteel Mill / Rolling equipment • Roll Neck Bearings – Run out tables • Heavy Duty Gearboxes (David Brown, Flender,Voith, Renold, Incla and Allis Chalmers) • Electric Motors, Pumps and Fans • Corrugating Machinery • (Langston,Mitsubishi, Simon, SHS & BHS) • Power Transmission Equipment • Roller Chain Conveyors • Mining Conveyors • KilnCar Bearings • Conveyor cars/Bogies for Ore and Sinter plants • Crushing Equipment (Pegson, Telsmith, Svedala) •Slurry/ Mud Pumps • Vibrator Screen Bearings.

BEARING STANDARDSPHOENIX metric bearings conform to the following standards for overall dimensions and internal clearances: - ISO 492,BSI 6107, DIN 620 AFBMA 20.PHOENIX inch bearings conform to BS 292 Part 2 for overall dimensions and internal clearances, Inch bearings can beproduced to EPA/ABEC 1 standards upon request.

MATERIAL SPECIFICATIONPHOENIX bearings are manufactured from high quality carbon chrome, vacuum degassed through hardening steels tothe following specifications:- BS 970:534 A99 AND 535 A99, SAE 52100 AND 100Cr 6.

CAGESPHOENIX cages for standard range of bearings are manufactured from centrifugally spun brass (60% Cu / 40% Zn).

OPERATING TEMPERATURESPHOENIX bearings are designed to operate within a temperature range of -40°C to +125°C. High temperature bearingsto S1, S2, S3 and S4 specification can be supplied on request.

LOAD RATINGSFigures for dynamic capacities are in accordance with methods prescribed by ISO standard 291/1-1977. Staticcapacities are in accordance with ISO standard 76:1987.

PHOENIX BEARINGS - BRITISH MADE BEARINGSFOR WORLD WIDE APPLICATIONS

17590 phoneix brochure 6/8/03 12:21 PM Page 2

PRECISION BALL & ROLLER BEARINGS

N 318-356LRJ 3-15MRJ 2 -12XLRJ 5-15N 417-428

NF 318-356IRJA 3015MRJA 2 -12XLRJA 5-15NF 417-428

NP 318-556LRJB 3-15MRJB 2 -12NP 417-428

NU 318-356NU 2320-2356LLRJ 3-15MMRJ 2 -12NU 417-428NU 1020-NU 10/710NU 2220-2276

NJ 318-356NJ 2320-2356LLRJA 3-15MMRJA 2 -12NJ 417-418NJ 1028-1096NJ 2220-2276

NUP 318-356NUP 2320-2356LLRJB 3-15MMRJB 2 -12NUP 417-428NUP1020-1090NUP 2220-2276

NC 318-356LLRJN 3-15MMRJN 2 -12NC 417-428

MMRJA 4-5+HJM

QJ 318-356QJL 3-6QJM 3-6QJ 218-256QJ 414-420QJ 1020-1072QJ 1240-1276

7320-73567320B-7356BLJT 3-15MJT 2 -12XLJT 4-167024-70/7507219-7296

6320-6356XLJ 5-15LJ 3-15MJ 3-12

LSN 3-6MSN 3-6

RLSNE 3-6RMSN 3-6

RLSN 3-6RMSN 3-6

W @ W @ W @

W @ W @ W @

W @

@ @

@

W

17590 phoneix brochure 6/8/03 12:22 PM Page 3

HEAVY DUTY ROLLER BEARINGS

The PHOENIX range of hevy duty roller bearings is available with alternative lipconfigurations to suit cutomers’ requirements. A regreasing facility can be

incorporated in the majority of designs.

Single Row Roller Bearingwith Brass CageN, NE, NP, NU, NJ, NUP, NC 400 Series

Double Row RollerBearing with Brass CageNNU 4900 SeriesNNU 4100 Series

Full ComplementSingle Row Bearing

with Retaining CirclipSL 182900 / 183000 /

182200 SeriesNCF 2900 / 3000 /

2200 Series

Four Row RollerBearing with BrassCage51 / 52 / 53 / 54000Series31000 Series

Full ComplementDouble Row Roller

Bearing withRetaining Circlip

SL 1849 / 1850 SeriesNNCF 4900 Series

Full ComplementThree Row RollerBearfing with SplitOuter Ring andRegreasing FacilityAlso available withPlain Outer RingSL 119 / 149 Series

Full complementFour Row RollerBearing with SplitOuter Ring andRegreasing Facility Also Avaiable withPlain Outer Ring

Full complementDouble Row RollerBearing with SplitOuter RingSL 0148 / 0149SeriesNNC 48V / 49VSeries

Full complement SingleRow Bearing with SelfRetaining Roller SetNJ 2300 VHSL 192300

17590 phoneix brochure 6/8/03 12:22 PM Page 4

HEAVY DUTY ROLLER BEARINGS

HY-LOAD ROLLER ASSEMBLIESPHOENIX roller assemblies are designed for applications where rollers are required to run directly on the shaft and inthe customers own design of housing.PHOENIX roller assemblies can be supplied complete with housings to the following specifications.

Roller Assembly with UNHARDENED SPLIT OUTER SLEEVE - shaft sizes 1” to 3” (prefix SS).Roller Assembly with HARDENED SPLIT OUTER SLEEVE – shaft sizes 1/2” to 21/4”Roller Assembly with SOLID HARDENED and GROUND OUTER RINGS – shaft sizes 1/2” to 11/4” (prefix SO).

MAX-LOAD ROLLER BEARINGSPHOENIX MAX-LOAD bearings consist of a solid outer race, roller assembly incorporating hardened and ground rollersand solid inner race. These are manufactured in three derivatives, standard series, wide series and double row series,all three can be supplied minus inner race for direct shaft mounting applications.

DESIGNATIONS130 – 380: Max-Load roller bearing with inner and outer race130W – 320W: Max-Load roller bearing (wide Series) with inner and outer race150DR – 270DR: Max-Load roller bearing (double row series) with inner and outer raceSuffix “M” represents bearings supplied minus the inner race.

MAX-LOAD ROLLER BEARINGS PLUS EXTENDED NOTCHED INNER RINGThis range is specifically manufactured for applications requiring positive location of the inner ring to shaft. They areavailable in selected sizes from standard to wide series range.

SUPER-LOAD ROLLER BEARINGS (HEAVY DUTY)Based around the same parameters as the max load bearings this range is a heavy duty series for more demaindingapplications.

DESIGNATIONS425 – 530: Super-load roller bearing with inner and outer raceSuffix M”M” represents bearings supplied minus the inner race.

17590 phoneix brochure 6/8/03 12:22 PM Page 5

OTHER “STANDARD RANGES”

ROLLER CHAIN - ROLLER CONVEYOR BEARINGS

The wide and diverse nautre ofPHOENIX’s manufacturing capability allows small batches of less propular ranges to beproduced at short lead times to satisfy the needs of both the replacement and OEM customer.

A selection of the ranges currently covered are as follows; please contact BEARING DISTRIBUTORS for furtherinformation.

BALL BEARINGS

Double Row Self Aligning BallBearingsNLJ SeriesNMJ Series

Angular Contact Ball BearingXLJT Series7200 Series7400 Series

Duplex BallBearingQJ 1000 SeriesQJ 1200 SeriesQJ 200 SeriesQJ 400 Series

Deep Groove RadialBall Bearings16000 Series6000 Series6200 Series6400 Series61800 Series61900 Series

Deep Groove“Maximum

Capacity” BallBearings

M200 SeriesM300 SeriesM400 Series

Many PHOENIX Roller Chains and Roller Conveyor bearings are often tailor made for heavy engineering usersworldwide, please ask our Technical Department for assistance. Large or small quantities are never a problem.

The unique design of thePHOENIX roller cageassembly enduresconditions that standarddesigns would not tolerate.

For applications requiring maximum load carrying characteristics fullcomplement bearings are produced with a mechanical labrynth sealto prevent dirt ingress.

17590 phoneix brochure 6/8/03 12:22 PM Page 6

CYLINDRICAL ROLLER THRUST BEARINGS

SPECIALISED BEARINGS

811 Series • 812 Series • 893 Series • 874 Series • 894 Series

Specialised Bearings produced byPHOENIX include:-

• Corrugator/Paper Machinery

• Heavy Duty Gearboxes

• Crushing Equipment

• Vibrator Screens

• Conveyor equipment

• Steel Mill / Rolling Equipment

• Slurry / Mud Pumps

• Kiln car bearings.

17590 phoneix brochure 6/8/03 12:22 PM Page 7

AUSTRALIAN DISTRIBUTOR

BEARING DISTRIBUTORS

Unit 5/27 Winterton RdClayton VIC 3168

Ph: (03) 9544 7211 • Fax: (03) 9544 1072Email: salesvic@bdist.com.au

PHOENIX BEARINGSNORTHWAY LANE

TEWKESBURYGLOS. GL20 8JG.

UNITED KINGDOMwww.phoenixbearings.co.uk

BRITISH MADE BEARINGS FORWORLDWIDE APPLICATIONS

17590 phoneix brochure 6/8/03 12:22 PM Page 8