Main Solutions Oil & GasHoneycomb Tech. For any inquiries please contact us at [email protected]

Main Solutions

Oil & Gas Honeycomb Tech.

For any inquiries please contact us at [email protected]

Oil & Gas - Storage Tank Equipment




BTE was founded in 1998 with the aim of designing, manufacturing and supplying better quality storage tank equipment solutions. Based on over 25 years of installation and maintenance experience, BTE’s specialized range of equipment is installed in tank terminals and refineries in over 85 countries.

BTE is ISO 9001:2008 certified, and all products are manufactured according to strict quality standards.

Head Office, Engineering & Marketing are located in Sydney, Australia, manufacturing is based at BTE’s modern facility near Seoul, South Korea.

BTE and Samia Canada Inc. formed an agreement for exclusive representation in Canada.



• The aim is to design, manufacture and supply better quality storage tank equipment solutions.

• BTE has over 25 years of installation and maintenance experience in AST market has a unique global position.

• Our equipment is installed in tank terminals and refineries in over 85 countries.

• Our Products are manufactured according to API Standards.



Storage Tank Products:

• Aluminum Geodesic Roofs• Aluminum Pontoon Internal Floating Roofs• Stainless Steel Pontoon Floating Roofs• Aluminum Full Contact IFRs• Floating Roof Seal System • Specialized Floating Suction Lines• SwingMaster Swing Joints• Floating Roof Drain Systems



Aluminum Geodesic Domes

The unique BTE flush batten design allows the water to flow over the Dome without pooling.

BTE innovation sets a new industry standard for oil storage tanks. BTE has incorporated the very latest design technology, together with many years of tank equipment design experience to create the ultimate in geodesic dome design .



Internal Floating Roofs

Both the BTE Heavy Duty Pontoon Aluminum Internal Floating Roof (IFR) and Full Contact fully welded honeycomb panel IFR have been designed for long maintenance free service.

Pontoon IFRs are available as all aluminum, all stainless steel and as a combination (hybrid) of both these two options.

IFRs can be cable or chain suspended from steel fixed roofs or from BTE Geodesic dome roofs.



BTE Primary and Secondary Seals for Floating Roof Tanks

Primary Seals:

BTE manufacture the Pantograph shoe seal. The pantograph shoe seal is available in stainless steel & galvanized steel options. A variety of vapour barrier fabrics are available including Teflon to suit any stored product. Shoe seals with wax scrapers are available.



BTE Primary and Secondary Seals for Floating Roof Tanks

Secondary Seals:

The BTE Secondary RollerSeal offers excellent sealing at a variety of rim spaces. The roller protects against seal turnover while allowing a minimum height design.

Stainless and galvanized steel seal options are available.



BTE Floating Roof Drain Systems

BTE design and manufacture Floating Roof Drain Systems, the heart of these systems is the BTE Drain Joint.

BTE Drain Joints have been comprehensively tested and are only drain joints above 3 inch diameter to have been totally leak free after 10,000 x 90 degree bend cycles with independent certification.

This is equivalent to over 27 years service @ 1 cycle / day.

Full assembly and pipe detail drawings together with Installation Instructions are provided with every BTE Drain joint purchase.



BTE Suction Lines, Skimmers & SwingMaster Joints

BTE is a leading designer and manufacturer of aviation fuel suction lines. BTE large diameter suction lines are installed in many major airport fuel facilities around the world.

BTE can design Floating Suction Lines & Skimmers for almost any tank. Lines can be easily located below steel or aluminum floating roofs.




As an IFR manufacturer, BTE can design appropriate suction line ramps and provide extra buoyancy for aluminum Internal Floating Roofs when necessary. Suction Lines can range from 3” to 36” diameter. Stainless Steel is the most commonly used material with carbon steel also available.




BTE SwigMaster ductile iron swing joints are epoxy coated internally and externally for Jet-A1 service. They have Ni-resist (Copper Free) bearings as standard. SwingMaster joints are also available in stainless steel for special order.

SwingMaster joints are currently available in 4”, 6”, 8”, 10”, 12”, 14”, 16”, 18”, 20”, 24”, 30”, & 36” sizes. Larger sizes to special orders.



BTE Quality Products have been supplied to the countries listed below. Full reference lists for each product type are available on application

AlbaniaAlgeriaAngolaArgentinaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBelarusBelgiumBrazil

BTE Global Supply

BruneiBulgariaCanadaChileChina ColombiaCosta RicaCroatiaCyprusDenmarkEcuadorEgyptFiji

FinlandFrance GermanyGhanaGreeceGuamHong KongHungaryIndiaIndonesiaIranIraqIsrael

ItalyJapanKenyaKazakhstanKorea KuwaitLithuaniaMalaysiaMauritiusNamibiaNetherlandsNew Caledonia

New ZealandNigeriaOmanPakistanPalauPapua New GuineaParaguayPeruPhilippinesPolandPortugalQatar

RomaniaRussiaSaudi ArabiaSingaporeSloveniaSouth AfricaSpainSri LankaSudanSwaziland TaiwanTanzaniaThailand

TurkeyU.A.E.UgandaU.K.UkraineUSAVenezuela

Vietnam Yemen

Shanghai / China

Erbil / Iraq

Dubai / UAE

Düsseldorf / GermanyRavalco GmbH

Toronto / CanadaSamia Canada Inc.

Hong Kong

Global Group Presence


Contact us:

Samia Canada Inc.170 Sheppard Ave. East, #200 BToronto, ON M2N 3A4 / CanadaTel: +1 416 548 5592Fax: +1 416 548 5593E-mail: [email protected] www.samia-canada.com

Documents

Main Solutions Oil & GasHoneycomb Tech. For any inquiries please contact us at [email protected]