8/2/2019 Lon Goal Gl544 Eng 19
2/2
TECHNICAL CHARACTERISTICS
GL544- 4" cylinder -Gauge: from 6 to 20
GL744- 3" cylinder -Gauge: from 6 to 13
Max speed: for plain stitch 400 rpm- for terry stitch 330 rpm.
(themaximum speed obtainable depends on various factors like:
yarns, stitchs
types, lubricant a.s.o.)
Brushless and co-axial main motor.
Electronic needle-by-needle selection for the execution of
Jacquard patterns.
9 electronic actuators.
9 pneumatic yarn fingers at feed 1 and 7 at feed 2 -3-4. 3
color
yarn fingers at color block 1.
Elastic yarn fingers at feed 2 and 4 with independent
feeding
devices.
Electronic adjustment of the fabric by cylinder movement via
a
stepping motor with various graduation options.
Pneumatic needle-rising cams control.
Electronic chain with possibility of automatic linking
programs.
Positive elastic feeder.
Control panel fitted for optional DINEMA Line-bank system.
Double needle lowering picker.
Motorized Raising Dial
Possibility to stop the circular cutter when yarn trimming is
not
required.
High resolution colour display.
Possibility upon request of Motorized circular cutter, to
control
yarn trimming length.
Possibility upon request of Motorized sinkers cap.
PRODUCTION CHARACTERISTICS
Single or double welt with 1 or 2 feeds with possibility of
having
elastic on each course or on alternate courses.
Socks and pantyhose produced on 4 feeds with reciprocated or
pouched heel&toe or tubular fabric in plain, standard or
sandwich
terry (half&full terry on the same sock).
Possibility of plating on all feeds 2 colour striping + ground
colour
on the two feeds.
Socks produced with alternate course elastic.
4 colour patterns + ground on the same course when knitting on
a
single feed, with a total combination of 12 colour + 3
groundcolours.
3 colour patterns + mesh or elastic ground on the same
course
when knitting on a single feed. 2, 3 or even 4 colour real
Jaquard
styles with combinations of laid-in elastic compression
articles.
Standard and sandwich terry fabric produced with the same
sinker
cap.
Possibilty of tuck stitches mesh on four feeds.
Possibility of variable increment of the elastic motor on
the
course.
Possibility upon request of Sole reinforcement on 4 feeds.
180reversed toe, right and left socks, 2-color heel and toe.
Dimensions
Weight machine Kg: 235 Yam creel Kg: 65
Number of needles depends on diameter and gauge. * High speed
plain knit sinker only
GaugeModel 6 1/2 7 7 1/2 8 8 1/2 9 9 1/2 10 10 1/2 11 11 1/2 12
12 1/2 13 13 1/2 14 14 1/2 15 15 1/2 16 17 18 19 20
GL544 4
84 88 96 108112116120
132 144 156 168*176*180*188*192*200*216*220*240*256*
Needle thickness = 0,7mm Needle thickness =0,6mm
Needle thickness = 0,85mm Needle thickness= 1mm
GL744 3
72 84 88 96 108 120 132 144
Needle thickness = 0,7mm Needle thick.= 0,85/1mm
Lonati S.p.A. 25124 Brescia (Italy). Via Francesco Lonati, 3.
Tel. 030 23901 Fax 030 2310024. www.lonati.com
The technical details given above are not binding and they can
be changed by LONATI S.p.A. - Lonati S.p.a - V. 18 - 15/4/2011
