LON I/O components

LON I/O components

for automation in buildings, installations and systems

Mo

du

le

LF-DI4 | 1108501319

4 inputs – digital

LF-DI10 | 1108511319 LF-DI10-IP | 1108511319IP

10 inputs – digital

LF-DI230 | 11086313

4 inputs – digital 230V

LF-DO4 | LF-DO4-IP1108521321 | 1108521321IP

4 outputs – digital (relay)

Des

crip

tio

n

For detecting potential-free switch states, for example electrical end position switches on vent valves or auxiliary contacts of power contactors.

For detecting potential-free switch states, for example electrical end position switches on ventilation dampers or auxiliary contacts of power contactors. Depending on how the jumper J has been set, the inputs can be operated as contact and voltage inputs (J-GND jumper) or with activation to GND (A2, J - + 24 jumper).

For detecting 230 VAC switch states, for example switches or buttons for light control. The input contacts 1L to 4L are wired to 230 VAC switches or con-tacts via the contacts 1N to 4N.

For switching electrical com-ponents, for example motors, contactors, lamps, blinds, etc. With strong inductive loads, we recom-mend protecting the relay contacts additionally with an RC element.

Inp

uts

• 4 potential-free contact inputs

•Switchingthreshold4.5VDC

• 10 contact or voltage inputs•High signal detection

> 8 V AC/DC

• 4 digital voltage inputs 230 V

Ou

tpu

ts

• 4 changeover contacts• Switchingvoltagemax.250VAC• Ratedcurrent LF-DO4:5A LF-DO4-IP: 10 A (80 A/20 ms)

• Totalcurrentoverallcontacts LF-DO4: 12 A LF-DO4-IP:25A

• Servicelifeelectrical LF-DO4: 9 x 104

LF-DO4-IP: 9 x 104

• ServicelifemechanicalLF-DO4:15x106

LF-DO4-IP: 30 x 106

Sch

emat

ic d

iag

ram

NET2

NET1

24V

LON

T

P/FT

-10

FT 5

000

1C2

2C2

3C2

4C2

A1/ +24V

A2/ GND

A1/+24 V

A2/GND

NET2

NET1

24 V

+24 V GND

FT50

00

C1C112345678910

J

LON

TP/

FT-1

0

A1/24V

A2/GND

NET1NET2

LON

TP/

FT-1

0

FT 5

000

24V

1N

2N

3N

4N

1L

2L

3L

4L

250VAC

250VAC

250VAC

250VAC

A1/+24 VA2/GND

NET2NET1

24 V

FT50

00

12 N.C.14 N.O.11 C

LON

TP/

FT-1

0

22 N.C.24 N.O.21 C32 N.C.34 N.O.31 C42 N.C.44 N.O.41 C

250 V / 5 A

Ho

usi

ng LF-DI4:35x70x65(mm) LF-DI10:35x70x65(mm)

LF-DI10-IP:159x41.5x120(mm)LF-DI230:35x70x65(mm) LF-DO4:35x70x65(mm)

LF-DO4-IP:159x41.5x120(mm)

LF-TO4 | 11086213

4 outputs – digital (triac)

LF-AI8 | 11085313

8 inputs – universally programmable

LF-AOP4 | 11085413 LF-AO4-IP | 11085413IP

4 outputs – analog (0 – 10 V)

LF-DIO4/2 | 1108551326 LF-DIO4/2-IP | 1108551326IP

4 inputs – digital2 outputs – digital (relay)

For switching electrical compo-nents, for example relays, contac-tors, HVAC valves, etc. Especially suited for noiseless and cyclic switching (PDM).

For detecting resistances and voltages of, for example, passive and active temperature sensors, electrical vent and mixing valves, valve positions, etc. The follow-ing temperature charateristics are stored in the module: PT100,PT500,PT1000,NI1000-TC5000,NI1000-TC6180,BAL-CO500,KTY81_110,KTY81_210,NTC1k8-T,NTC5k-T,NTC10k-T,NTC20k-T,LM235Z(-50°Cto130°C)

It can be used as encoder for control variables, for example for electrical vent and mixing valves, valve positions, etc. With the LF-AOP4, it is possible, via the front-side potientiometers, to switch between automatic and manual mode.

It is suitable for accommodat-ing, for example in a room, light switches and room contacts and switching two light strips or as blind control. The control of 2 motorized fire dampers is also possible as are many other applications.

• Temperature range adjustable• Resolution14Bit•Voltage input 0 – 10 V DC• Resolution 10 mV (0.0-100%)

• 4 digital voltage inputs 30 V AC/DC

•High signal detection > 8 V AC/DC

• 4 digital triac outputs• Switchingvoltage 20to250VAC

• Rated current 0.8 A • Fuses (triacs) 2 A each• Total current over all

outputs max. 2.4 A

•Output voltage 0 to 10 V DC

• Outputcurrent5mA at 10 V DC

• Resolution 10 mV/Digit

• 2 changeover contacts• Switchingvoltage250VAC• Switch-onpeak:80A/20ms• Continuouscurrentperrelay

LF-DIO4/2: 16 A LF-DIO4/2-IP: 10 A

• Totalcurrentofallcontacts LF-DIO4/2:25A LF-DIO4/2-IP: 20 A

• Servicelifemechanical: 30 x 106 electrical: 1 x 105

NET2

NET1

8C27C26

C2

A2 /GND

A1/+24 V

LON TP/FT-10

FT 5

000

24 V

Outputs:Voltage 15 V DCor 24 V AC/DCInputs:Voltage: 0-10 VUniversal-Temp.Sensor40 Ohm - 4MOhm

SS

C2

4C23C22C21C2

5

24V

LON TP/FT-10

Output:

Voltage 0-10V

1C2

2C2

3C2

4C2

D

A

FT 5

000

NET2

NET1

A1/+24VA2/GND

FT 5

000

24V

LON

T

P/FT

-10

1C12C13C14C1

J

12 N.C.

22 N.C.

14 N.O.

24 N.O.

11 C

21 C

GND+24V

NET2

NET1

A1/ +24VA2/ GND

LF-TO4:35x70x75(mm) LF-AI8:50x70x65(mm) LF-AOP4:35x70x65(mm)LF-AO4-IP:159x41.5x120(mm)

LF-DIO4/2:50x70x65(mm)LF-DIO4/2-IP:159x41.5x120(mm)

LF-DM4/4 | 1108561326

4 inputs – digital2 outputs – digital2 outputs – digital (relay)

LF-AM2/4 | 11085713

2 inputs – analog2 outputs – analog2 outputs – digital

LF-SI4 | 11085813

4inputs–digital(S0)

LF-TP | 11085913

6 inputs – digital2 outputs – digital2 x2 outputs – digital (relay)

It is suitable for querying, for example, switching states and, as a result, switching motors or other actuators.

It is suitable for controlling, for example, motorized vent valves and switching on alarm at the set threshold value. In a LON installation, the individual analog outputs are activated in percent bythenetworkvariablesSNVTand accordingly provide a voltage of between 0 and 10 Volts. In addition, the outputs can be set topresetvoltagevalues.Bothdigital outputs can be activated individually or as a function of an adjustable threshold value.

ForcountingS0counterpulses.The software contains the LONMARKprofile2201-10util-ity meter. This allows very good integration of the module into a LON energy controlling system. Themodulesavesupto500datarecords consisting of counter pulses and time stamps per chan-nel by means of a real-time clock (RTC). This makes it possible to use theLF-SI4alsoasdatalogger.Incase of a power failure, the data records remain saved. If desired, the 4 inputs can be wired to potential-free switches or contactsorS0counteroutputs.

For switching, for example, multi-stage pumps, fans, burners, blinds or the like. The digital inputs 1 to 6 are wired to potential-free switches or contacts on two poles via the contacts C2.

• 4 digital inputs• Switchingthreshold4.5VDC

• 2 voltage inputs 0 to 10 V DC

•Voltage input max. 11 V DC

• Resolution 10 mV (0.0 to 100%)

• Error 100 mV

• 4S0inputsaccordingto DINEN62053-31ClassA

• 6 digital inputs• Switchingthreshold4.5VDC

• 2 output contacts (relay) NO

• Switchingvoltagerelay 250VAC

• Rated current (relay) 6 A • Servicelife

mechanical: 30 x 106 switching operations electrical: 1 x 105

• 2NO(photoMOSrelay)• Switchingvoltage(digital)

40 V AC/DC• Rated current (digital) 100 mA

• 2 analog outputs 0 to 10 V DC

• Outputcurrent5mA at 10 V DC

• Resolution0.625mV/Digit• Error 100 mV

• 2 digital outputs•Output contacts 2NO(photoMOSrelay)

• Switchingvoltage max. 40 V DCC/DC

• Continuous current max. 100 mA

• 2 two-stage output contacts (relay)

• Switchingvoltage max.250VAC

• Continuouscurrentmax.5A (resistive load)

• Servicelife mechanical: 30 x 106 electrical: 1 x 105

•Output contact (digital) 2NO(photoMOSrelay)

• Switchingvoltage(digital) 40 V AC/DC

• Rated current (digital) 100 mA

24V

LON

T

P/FT

-10

FT 5

000

4

1

14K1

13

24K2

23

S

S1

S2

C2

23

NET2NET1

A1/ +24V A2/ GND

A

D

Inputs:Voltage 0-10V

Outputs:Voltage 0-10V

LON TP/FT-10

24V

K1

K2

FT50

00

A1/ +24V

A2/ GND

NET1

NET2

I1I1-I2I2-O1O1-O2O2-1314

2324

24V

LON

T

P/FT

-10

FT 5

000

S01+

S01

S04+

S04

S02+

S02S03+

S03

NET2NET1

A1/ +24V A2/ GND

24V

FT 5

000

LON

T

P/FT

-10

111424

S1

S1

313444

S2

S2

1 ... 6 C2

NET2NET1

A1/ +24VA2/ GND

Inputs

LF-DM4/4:35x70x65(mm) LF-AM2/4:35x70x65(mm) LF-SI4:35x70x65(mm) LF-TP:50x70x75(mm)

LF-CI4 | 1108601332

4 inputs - analog(Current and voltage input)

LF-TI-IP | 11086105IP

4 inputs – analog4 outputs – digital (triac)

LF-FAM | 11087913

Field bus switch-on module

NG4 | 110561

Powersupplyunit24VDC /700mA

It is suitable for decentralized switching tasks, such as in the industrial and refrigeration sector.

For detecting temperatures or voltages or for switching 4 thermal valve drives with triacs.

Switch-onmoduleforbuscon-nection, supply voltage and adjustable bus termination. The switch-on module was developed as wiring help for supplying the supply voltage and a two-wire bus to the LON bus modules. A bus terminatingresistorof52.3Ohm(R/2) and for line topology 105Ohm(R)canbesetundertheremovable cover as jumper for free network topology.

The NG4 power supply supplies regulated direct voltages for sup-plying power to the respective devices of the product family of I/O components. The device sup-plies regulated direct voltage 24 V DC at a power of 16 watts.

• 4 current inputs• 4 voltage inputs• Current input 0 to 20 mA DC or

4 to 20 mA DC• Resolution0.05mA• Error 1%•Voltage input

0 – 10 V DC max. 11 V DC• Resolution 10 mV (0.0 to 100 %)• Inputresistance10kΩ

• 4 temperature inputs• Range 40 Ohm to 4 MOhm• Temperature range adjustable• Resolution 10 mV • Error approx. ±100 mV ±0.2C•Voltage input 0 to 10 V DC• Resolution 10 mV (0.0 to 100%)• Error approx. ±10 mV

• 4 digital outputs (triac)• Switchingvoltage 20to250VAC

• Rated current 0.8 A • Fuses for the triacs 2 A each• Total current over all outputs

max. 2.4 A

•Nominal voltage 110to240VAC,50/60Hz

• InternalfuseT1.0A/250Vsoldered fuse

•Output power 16 W•Output voltage

+24 V DC•Operating voltage display

green LED•Output current (max.)700mA

• As-deliveredaccuracy±5%•Mains failure backup

40 ms

24V

LON TP/FT-10

Input:Voltage:0-10V

D

A

FT 5

000

I4V4C2

I3V3C2

I2V2C2

I1V1C2

Current: 0-20mA

NET2NET1

A1/ +24V A2/ GND A

B

LF-CI4:35x70x65(mm) LF-TI-IP:159x41.5x120(mm) LF-FAM:35x70x78(mm) NG4:50x70x65(mm)

METZ CONNECT worldwide

Tinton Falls

Strasbourg Budapest

Shanghai

Hong KongZhongshan

Singapore

Thal

BLuMBerG

MeTZ CONNeCT uSA Inc.

200 Tornillo Way Tinton Falls, NJ 07712 USA

Phone + 1 . 732 . 389 1300 Fax + 1 . 732 . 389 9066

www.metz-connect.com

PrODuCTION SITeS

MCQ TeCH GmbH

Ottilienweg 9 78176 Blumberg Germany

Phone + 49 . 77 02 . 533-0 Fax + 49 . 77 02 . 533-433


MeTZ CONNeCT Hungary Kft

1201 Budapest Helsinki út 51 Hungary

Phone + 36 . 1 . 289 10 20 Fax + 36 . 1 . 284 09 47

MeTZ CONNeCT Zhongshan Ltd.

Ping Chang Road Ping Pu Industrial Park Sanxiang Town Zhongshan City Guangdong Province China, Zip code: 528 463

MeTZ CONNeCT France SAS

28, Rue Schweighaeuser

67000 Strasbourg France

Phone + 33 . 3 . 886 170 73 Fax + 33 . 3 . 886 194 73


MeTZ CONNeCT GmbH

Im Tal 2 78176Blumberg Germany

Phone + 49.7702.533-0 Fax + 49.7702.533-189


BTr swiss AG

Postfach 162 9425 Thal Switzerland

Phone + 41 . 71 . 920 10 30 Fax + 41 . 71 . 920 10 31


Shanghai Branch

Room 1518, Xu Hui Busi-ness Building, 168, Yu De Road, XuHui District, Shanghai 200030 China

Phone + 86 . 21 . 336 342 28 Phone + 86 . 21 . 336 343 34 Fax + 86 . 21 . 336 342 24 MeTZ CONNeCT Asia Pacific Limited

Suite 701, 7/F, Chinachem Hollywood Centre 1–13 Hollywood Road Central Hong Kong

SALeS OFFICeS

MeTZ CONNeCT (SINGAPOre) PTe. LTD.1 Kaki Bukit Ave 3 # 10-01 KB-1 Singapore 416087

Phone + 65 . 67 47 . 09 98 Fax + 65 . 67 46 . 31 20


I/O components equipped with the LON FT500 TransceiverFor automation in buildings, installations and systems

Safe and low-cost operation of infrastructures in large, but also in small, buildings nowadays requires that the most important operational functions such as system control, air-conditioning, ventilation and lighting are executed automati-cally. However, this also makes higher demands on the functions of the building installation, which can usually be met by conventional technology only with large expenditures. This is why building automation is increasingly using serial bus systems, which execute the transmission of information between sensors and actuators, switches and higher-ranking control systems.

Bus systems such as LON offer different benefits:• easier planning and installation of the building functions• high flexibility in use of the building, as the functions are freely programmable and can thus be reset and readjusted as required at any time.

Compact and intelligent I/O components for decentralized applicationsTheir compact design for the DIN rail (standard front dimension of 45 mm) and wide variety of types, also in the IP65 housing, make the LON I/O components from METZ CONNECT highly suitable to be used in decentralized applications. The modules can be used where they are really needed. This considerably reduces the wiring required compared with the central switch cabinet assembly. Moreover, the mixing ratio of the METZ CONNECT I/O components adapted to the particular application optimizes the number of unused inputs and outputs.

High functionality through special application softwareMETZ CONNECT provides additional application software for the individual devices, tailored to very specific applications. This allows the user to use proven functionality at low costs and save his own programming costs. The descriptions of the application software can be downloaded from the homepage of www.metz-connect.com/de/software-fur-module-mit-ft5000-chip.

Minimum wiring required and series connection of the I/O components by means of jumpers

The power supply and the bus connection are established and passed on on the topside or front side of the I/O components. Plugging in a jumper allows up to 15 I/O components to be connected easily and quickly to one another and arranged in a row.

easy and flexible system integration with FT5000 Smart TransceiverThe advantages of the new processor generation to the user are obvious: Thanks to a higher memory capacity and a larger number of network variables (254 SNVT), more room is available for application software. The increased clock rate of 40 MHz increases the overall performance, while the licensing fees (credits) for using the LON technology are eliminated altogether. Integration of the FT5000 LON devices into existing LON networks is possible. Existing LON systems can be combined with the FT5000 and thus also be expanded.

MeTZ CONNeCT GmbH

Im Tal 2

78176 Blumberg

Germany

Phone + 49 77 02 533- 0

Fax + 49 77 02 533-189

[email protected]


METZCONNECTUSAInc.

200 Tornillo Way Tinton Falls, NJ 07712 USAPhone + 1-732-389-1300 Fax + 1-732-389-9066 www.metz-connect.com

METZCONNECTFranceSAS

28, Rue Schweighaeuser 67000 Strasbourg FrancePhone + 33 38 86 170 73 Fax + 33 38 86 194 73 www.metz-connect.com

METZCONNECT(SINGAPORE)PTE.LTD.

1 Kaki Bukit Ave 3 # 10-01 KB-1 Singapore 416087Phone + 65 67 47 09 98 Fax + 65 67 46 31 20 www.metz-connect.com

ShanghaiBranch

Room 1518, Xu Hui Business Building, 168, Yu De Road, XuHui District, Shanghai 200030 ChinaPhone + 86 21 33 63 42 28 Phone + 86 21 33 63 43 34 Fax + 86 21 33 63 42 24

METZ CONNECT GmbH is member in the following organizations and associations.

8999

08-0

1 |

10/2

013

Documents

LON I/O components