Upload
civodul
View
255
Download
0
Embed Size (px)
Citation preview
8/13/2019 LITHS1A1 Model 1A1 Filter Housing
1/2
The 1A1 MODEL Cartridge Filter Housing is an all-metal,
two-piece housing, featuring centerpost-type construction. The1 Al Model has a maximum operating temperature and pressureof 125 psig at 200oF. The 1A1 Model Cartridge Filter Housinghas flow rates to up to 6 Gallons Per Minute (GPM).
APPLICABLE FILTER CARTRIDGESMicro-Klean III (Series U30)Betapure
OptionsMounting bracket; order separately.
STANDARD MODEL SPECIFICATIONSTable 1 gives specifications for the 1A1 Model. Note that M
mum Operating Pressure is the rating for the housing oActual filter operating temperature depends on temperaturepability of the filter cartridge used in the housing.
TABLE 1 - SPECIFICATIONSOperating Data 1A1 Model
Maximum Operating Pressureand Temperature
125 psi @ 200oF
Flow Rate (GPM) See Table 2.Materials of Construction:
Head and Sump Die-Cast AluminumCenterpost Stainless Steel
Head Gasket Buna N & CorkCap-Nut Gasket Fiber
Connection Sizes 3/8" NPTFCartridge Requirements The model uses one filter cartridge.
Cartridge Requirements for more infortion.
CARTRIDGE REQUIREMENTSThe 1A1 Model Cartridge Filter Housing uses one Micro-KIII Cartridge or one Betapure Cartridge Filter.
FLOW RATESTable 2 gives maximum flow rates in Gallons Per Minute (Gfor the 1A1 Model Cartridge Filter Housings. Do not use Tafor filter sizing. Use the table as a guide only in establishinhousing flow rates. When you know the flow rate for a selecartridge, then use the table to determine whether or not housing is within the recommended flow rate. Remembeconsider the amount of contaminant to be removed whenlecting a filter.
TABLE 2 - RECOMMENDED FLOW RATES
HousingModel Inlet/Outlet
FLOW (GPM)
Water80
SSU150SSU
300SSU
600SSU
1000SSU
1A1 3/8" NPTF 6 5 4.5 4 3.5 3
Model 1A1 Cartridge Filter Housing
a 3M company
FEATURES BENEFITS
All-metal, two-piece construction Long Service Life
Mounting pads drilled to accept self-tapping screws pro-vided with the optional mounting bracket
Easily Mounted to Wall or Support Structure
Centerpost-type design Quick and Easy Cartridge Change-out
8/13/2019 LITHS1A1 Model 1A1 Filter Housing
2/2
STANDARD MODEL DIMENSIONSTable 3 gives dimensions in inches and shipping weight inpounds for the 1A1 Model Cartridge Filter Housing. Theseshould be used for rough plumbing and approximate size defi-nition. Note that Figure 1 defines a length or width by a lettersymbol in the top row. The square where the row and columnmeet is the selected dimension.
TABLE 3 - 1A1 HOUSING DIMENSIONS
Model A B C DShippingWeight
1A1 6 3/16" 4 15/16" 3 1/2" 2 3/4" 3 lbs
1A1 MODEL ORDERING GUIDEPlant Code 01 Product Code 020
Model Catalog Number Mounting Bracket Kit*
1A1 44109-01 35581-05
* Order Separately
OPTIONALMOUNTINGBRACKET
INLET OUTLET
A
B
D
C
Cuno Incorporated400 Research Parkway
Meriden, CT 06450, U.S.A.Tel: (800) 243-6894
(203) 237-5541Fax: (203) 630-4530
www.cuno.com
CUNO Pacific Pty Ltd140 Sunnyholt Road
Blacktown, NSW 2148Australia
CUNO K.K.Hodogaya Station
Building 6F1-7 Iwai-cho, Hodogaya-ku
Yokohama 240 Japan
CUNO Latina LtdaRua Amf Do Brasil 251
18120 Mairinque-SpBrazil
CUNO Ltd21 Woking Business Park
Albert DriveWoking, Surrey GU215JY
United Kingdom
CUNO Filtration Asia Pte Ltd2A Tuas Avenue 12Singapore 693023
Cuno Filtration Shanghai Co, LtdNo. 2 Xin Miao San Rd,
Xin Miao Town,Song Jiang District,
Shanghai. China. 201612
a 3M company
Your Local CUNO Distributor is:
WARRANTYSeller warrants its equipment against defects in workmanship and materialfor a period of 12 months from date of shipment from the factory undernormal use and service and otherwise when such equipment is used in ac-cordance with instructions furnished by Seller and for purposes disclosedin writing at the time of purchase, if any. Any unauthorized alteration ofmodification of the equipment by Buyer will void this warranty. Sellers lia-bility under this warranty shall be limited to the replacement or repair,F.O.B., point of manufacture, of any defective equipment or part which,having been returned to the factory, transportation charges prepaid, hasbeen inspected and determined by Seller to be defective.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EITHEEXPRESSED OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR USEOR ANY OTHER MATTER. Under no circumstances shall Seller be liableto Buyer or any third party for any loss of profits or other direct or indireccosts, expenses, losses or consequential damages arising out of or as aresult of any defects in or failure of its products or any part or parts thereofor arising out of or as a result of parts or components incorporated inSellers equipment but not supplied by the Seller.
FIGURE 1 - 1A1 MODEL FILTER HOUSING
CUNO Incorporated, 1992 All rights reserved LITHS1A1.0692