PISTON PUMP

LIND JENSENAGRI

EN

A

A

ISO E

Approved

Format Rev.

Title

Date

Material no.

Replaces

Date

Replaces date

ScaleLind Jensens Maskinfabrik A/SKroghusvej 7, HøjmarkDK-6940 Lem St

Signature

Sheet

Project no.

Weight

This document and the information set forth herein are proprietary to LJM. The information is confidential and subject to copyright protection. The information is placed at the disposal of the receiver solely for personal use and only for manufacture, repair or use of original LJM products, according to contract or other written agreement hereon with LJM. The Information must not, either wholly or partly, be copied, reproduced, published or in any other way made available to any third part without written consent from LJM.The information must not, either directly or in succession, be transferred or handed over to any third part to the rights of the receiver.

10000192204

MGJ

28.06.18

001 / 2 A3

??28.06.18

(1:15)

Tolerance

Modification no.Modification date

Document no.

Rev.:03

416 kg

A

BD

FE

C

LJM’s piston pump is suitable for animal housings where the slurry needs to be pumped efficiently over longer distances.

○ Pumps the manure effectively over long distances

○ The ideal solution for pumping thick liquid slurry

○ Low power consumption compared to traditional pumps

○ Minimal wear ○ Multiple mounting options ○ LJM hydraulic cylinders installed in the

piston pump ○ 50 years experience in the production of

hydraulic cylinders

TypeP

2

kWI A

Amm

B mm

Cmm

Dmm

Emm

Fmm

Oil flowL/min

Pump pressure bar

Flowm3/t L/min

PISTON PUMP 5.5 10.4 3122 789 1675 1135 Ø450 Ø182 30 5.5 22 360

Voltage 400V

I - A Ampere consumption

Pump casing AISI 316

Hydraulic pressure 100 bar

Stamp diameter / cylinder Ø 100mm

Stroke 1150mm

Valve housing Galvanized S235

Gate valve plate AISI 316

Piston Pump

In the suction process, the inlet valve is open, the outlet valve is closed, the piston is in the bottom. The piston retracts and a negative pressure is formed in the piston pump and the slurry is sucked in.

When the piston is in the top and the pump is full, the inlet valve is closed and the outlet valve opens. The piston presses downwards, creating an overpressure pressing the slurry out of the pump and further into the reception tank.

The two valves change back and the suction process will be repeated again.

The system in operation

10

00

01

92

74

1-0

3

Ready to deliver

the right product, with the right quality, at the right priceand at the agreed delivery time - locally and globally.

LIND JENSENAGRI

Lind Jensens Maskinfabrik A/S Kroghusvej 7, Højmark DK-6940 Lem St. Denmark Phone: +45 97 34 32 00 Fax: +45 96 74 42 96 E-mail: ljm@ljm.dk www.ljm.dk