LEWIS Manufacturing Co.SUPPLY STORE DISTRIBUTIONStocks Maintained in All Active Areas

Call Toll-Free at 1-888-398-4719 For ProductInformation or The Distributor Nearest You.

Printed in U.S.A.

Phone (405) 634-5401FAX (405) 632-8608e-mail lewismfg@aol.comP.O. BOX 95089 • 3601 S. ByersOKLAHOMA CITY, OKLAHOMA 73143

Now accepting Visa and MasterCard.

®

OILFIELD, INDUSTRIAL AND UTILITY SUPPLIES

CARREAU OILFIELD SPECIALTIES, LTD.9509 - 41st AvenueEdmonton, Alberta, Canada T6E-5X7(780) 436-7730

BILL POOLE PRODUCTS710 W. Admiral Doyle Dr.New Iberia, Louisiana 70560(337) 367-3465

Field Office:237 1/2 N. Hollywood Blvd.Houma, LA 70360(985) 873-0116

M & C SALES414 S. Elm StreetCasper, Wyoming 82601(307) 266-2260

LAUREL MAGNETO SERVICEP.O. Box 4279Laurel, Mississippi 39441(601) 428-8211

BOB HERBERT & ASSOCIATES, INC.Main Office:2213 Aldine BenderHouston, TX 77032(281) 449-1010Field Offices:2907 CatalpaVictoria, TX 77901(361) 578-79561801 Hwy. 281 SouthP.O. Box 9Alice, TX 78333-0009(361) 664-0472

Rev. 2/ 05

BOB DAVIS SALES129 Freestate Blvd.Shreveport, Louisiana 71107(318) 222-7121

401 S. CommerceKilgore, Texas 75662(903) 984-3093

SLOUGH EQUIPMENT CO.Box 13587Odessa, Texas 79768(432) 362-2576

RDM EQUIPMENT COMPANY1141 Mechanics Barq RoadP.O. Box 169Wooster, OH 44691(330) 264-8808

KITCO910 KennedyGreat Bend, Kansas 67530(620) 792-2764

Oilfield Bundle KeepersOilfield Bundle Keepers

RepresentativesRepresentatives

Our O model series is traditionally used as a splicing grip. However,now this versatile series is also being used for cable bundling and wecall the grips the Bundle Keeper series. Used in this manner, the BundleKeeper model dramatically reduces abrasion and cut hazards to cablesby providing a protective wire mesh barrier. These grips convert unsight-ly, dangerous loose cabling, which is a major trip hazard, into manage-able and safe bundles as in the picture.

Keep in mind that these can also be used on hydraulic and pneumat-ic lines that may need an extra measure of protection and organization.

Keep your cables and lines organized and protected!The Bundle Keeper eliminates a main cause of triphazards – loose cabling.

MeshPart No. Range Wk.Ld. Weave LengthBK-B-TW-60 11/4" - 2" 1500 double 60”BK-B-TW-120 1/4" - 1/2" 1500 double 120”

BK-C-TW-60 1/4" - 1/2" 3500 double 60”BK-C-TW-120 1/4" - 1/2" 3500 double 120”

BK-D-TW-48 1/4" - 1/2" 3500 double 48”BK-D-TW-60 1/4" - 1/2" 3500 double 60”BK-D-TW-120 1/4" - 1/2" 3500 double 120”

BK-E-TW-60 1/4" - 1/2" 3500 double 60”BK-E-TW-120 1/4" - 1/2" 3500 double 120”

BK-F-TW-60 1/4" - 1/2" 3500 double 60”BK-F-TW-120 1/4" - 1/2" 3500 double 120

OILFIELDOILFIELDLewis Manufacturing Company has been in business since 1936 striving to provide

the highest quality American made products available. Our product lines continue toexpand, and are tailored to meet the needs of the future. Lewis Derrick Belts are constructed of either heavy duty woven webbing or High Visibility yellow nylon.

Lewis now offers a complete line of Fall Arrest Harnesses, Shock Absorbing Lanyards, Single and Double Retractable Lanyards, and Lanyard Anchors for all the jobs on the rig. Our Fall Arrest Harness line is an excellent option for general industry, as well as oilfield applications.

Lewis still offers our original line of Derrick Belts, and braided Steel Tail Ropes. Our LSG Snakes are available in the original configuration, or in the new streamlined LSG-X series.

We manufacture, clean and repair rig-housing canvas. Our field salesmen willcome to you to measure and quote a new set of rig tarps. High Quality PVC coatednylon canvas will last for years, and is water and oil resistant. We now have CADdesigned canvas, and will have your custom blueprint on file for future reference.

Brake Bands need new blocks, and servicing? Ship them to us, request a pickup, or drop them by. We will Sandblast, do a Magnaflux inspection, Paint, andRe-Line at a fair price, and with a quick turnaround. All work performed at ourOklahoma City Location.

Lewis Manufacturing offers a high quality line of Pulling Grips, SuspensionGrips, and Ball Bearing Swivels. Our pulling grips line offers several differentstyles for all overhead, and underground applications. If you are makingheavy primary or lighter secondary cable pulls, we have the grip to fit your requirements.

Always read and follow all Warnings, and Cautionary information, andread user instructions on all Lewis Manufacturing equipment. Failure todo so could lead to serious injury or even death. Call our toll free numberwith any questions or comments regarding our equipment. Our out call-ing system enables us to be available 24/7, so if you are in a bindplease call anytime of the day or night. We are here to help. Please visit our website at www.lewismanufacturingco.com.

PRODUCTSOILFIELD, INDUSTRIAL & UTILITY PRODUCTS

Revised 2/ 05

page

Fall Arrest Harnesses 1, 2

Derrick Belts 3

Steel Tail Ropes 4

Single and Dual RetractableNylon Lanyards, Slo-StopLanyards, Extension TailsLanyard Anchors 4

Heavy-Duty Snake Grips 5Derrick Light Safety Cables 6

Rig Housing & Covers 6Bundle Keepers Back CoverLewis Rep’s Back Cover

1-888-398-4719 or visit our website at: www.lewismanufacturingco.comRig photos by Derek Zivney

KITCO307 South ClayLiberal, Kansas 67905 (620) 624-7067

KITCO2301 MenkeGarden City, Kansas 67846(620) 275-2247

Jerry VaughnMAKENNA SALES5004 Jacksboro HighwayWichita Falls, Texas 76302P.O. Box 8025Wichita Falls, Texas 76037(940) 766-4064

EXPORT:HENRY STERN & COMPANY, INC.P.O. Box 925Elmsford, New York 10523(914) 345-1901

FAH-3Y W/TThe FAH-3Y W/T has rearD-rings at waist-level andshoulder-level with an 11”tail on either one for easieraccess which provides awell placed leverage pointwhile working high on a rig.

The FAH-3Y fall arrestharness is now construct-ed of “high-visibility” yel-low nylon webbing andhas “rappelling-style legstraps. It has three D-rings for all drilling rigjobs. The top shoulderlevel D-ring is for theshock absorptiondevice, while theback D-ring atwaist level pro-vides an anchorpoint for leverage.The D-ring up frontprovides a point tohook in to, whileclimbing the rig.

All Lewis Fall Arrest Harnes-ses now come with shoulderpads and can be ordered withan extension tail.The tail enables the user toeasily attach and remove hislife line. Tails can be ordered onthe upper or lower D-rings onthe back of the belt. (Note pic-ture of FAH-3Y W/T with tail onupper D-ring or lower D-ringand shoulder pads.) Shoulderpads are constructed of highgrade padding that will consid-erably improve the comfort ofthe harness. These pads areremovable and washable.Replacement pads can beordered and installed in thefield by the customer.

Fall Arrest HarnessesFall Arrest Harnesses

FAH-3Y FAH-3Y-2

LEWIS MFG. CO. • 3601 S. Byers (73129) • P.O. Box 95089 (73143) • Oklahoma City, Oklahoma405-634-5401 • Fax: 405-632-8608 • E-mail: lewismfg@aol.com • www.lewismanufacturingco.com

LEWIS MFG. CO. • 3601 S. Byers (73129) • P.O. Box 95089 (73143) • Oklahoma City, Oklahoma405-634-5401 • Fax: 405-632-8608 • E-mail: lewismfg@aol.com • www.lewismanufacturingco.com

Lewis now has Fall Arrest Harnesses made of lighter-weight “high visibility” yellow nylon and “rappelling”style leg straps that improve both comfort and fit!NEW

1 2

The FAH-3Y-2is a true “FivePoint Harness”.All the D-ringsrequired foreven the mostdemanding oil-field jobs. Callfor furtherdetails.

HCB FAH-3Y W/T

FAH-3Y-2-MB

The HCB FAH-3Y W/Tis a fall arrest harnesswith a built-in sling seatfor ensured safety andcomfort for extended peri-ods of time. Thisbelt has dual D-Rings up front forequalized climbingpressure and for usewhile suspended inthe work environ-ment.

Photo by Derek Zivney

The FAH-3Y-2-MBis a true “Five PointHarness” with aremoveable bellyband. All the D-rings required for even the most demanding oilfield jobs. Call for further details.

WARNING!Failure to use Fall Arrest

Harnesses as detailed in thesupplied user instructions,may result in serious injury or even death. Shoulder-level tail

Waist-level tail

WARNING!Do not use any Lewis

Safety Equipment if youweigh over 300 pounds.

DerrickBelts

DerrickBelts

HCB-1

TB

M

LB

MS or MBBC

Lewis Climbing Belt

Lewis Tower, Platformand Tank Belt

LewisLineman’s Belt

Lewis Snap-on CombinationMonkey Board and Derrick Belt– type MS. Also available in buck-le-on model – type MB.

Lewis ReinforcedMonkey Board Belt

Lewis Buckle-onCable ReinforcedDerrick Belt

Oilfield Climbing belt tobe used with counter-weight and pulley forclimbing derricks.

SCLewis Snap-on CableReinforced Derrick Belt

Some Derrick Belts Can Now Be OrderedWith Stainless Steel Reinforcement

Special waist sizes of all Lewis safety belts available on request.

DO NOT ALTER ANY LEWIS MANUFACTURING EQUIPMENT IN ANY WAYLewis Tail Ropes and Derrick Belt Models SC, BC, HCB-1, TB, MS and

MB have been tested and meet or exceed requirements outlined in ANSI10.14 (1991).

Lewis Manufacturing does not assume any liabilities for accident orinjuries resulting from a field repaired or altered belt.

Inspect Lewis Safety Belts and Tail Ropes twice yearly. Record inspec-tion dates on tags attached to safety belts, lanyards and tail ropes.

Tail Ropes Tail Ropes

LEWIS MFG. CO. • 3601 S. Byers (73129) • P.O. Box 95089 (73143) • Oklahoma City, Oklahoma405-634-5401 • Fax: 405-632-8608 • E-mail: lewismfg@aol.com • www.lewismanufacturingco.com

LEWIS MFG. CO. • 3601 S. Byers (73129) • P.O. Box 95089 (73143) • Oklahoma City, Oklahoma405-634-5401 • Fax: 405-632-8608 • E-mail: lewismfg@aol.com • www.lewismanufacturingco.com

Lewis Derrick Belts are constructed of the best grade woven webbing material that will outwear othermaterials, yet is easy to clean and stays pliable under changing climactic conditions. All stitches aresewn with heavy-duty dacron thread. Copper rivets are placed at all stress points for reinforcement.

Lewis Snap-on type derrick belts provide two ways of release… through the snap at front or waist,adjusting buckle at the side. Strap adjustments may be made without removing belt. All Lewis belts areof extra strong construction… adjusting holes are fitted with brass eyelets and all types of belts areequipped with drop forged steel fittings.

Lewis Derrick Belts are drop tested and steel fittings are proof load tested from 2,000 to 5,000 poundsby independent testing laboratories to check the webbing and construction. Certified results prove thatthey meet the most exacting specifications of safety engineers.

3 4

Flexible SteelTail Ropes

Photo by Derek Zivney

Photo by Derek Zivney Single Positioning Retractable Lanyard1 1/4” yellow nylon tube-webbing, 2’, 4’ or 6’ lengths, with heavy-duty retractableinsert to draw slack from a slack lanyard to minimize trip hazard.

Dual Positioning Retractable Lanyard1 1/4” yellow nylon tube-webbing, 2’, 4’ or 6’ lengths, with heavy-dutyretractable insert to draw slack from a slack lanyard to minimize trip hazard.

Lanyard Anchor2” yellow nylon webbing, 2” D-ring on one end and 3” D-ring on the other. Available in 2’, 3’, 4’ and 6’ lengths. For use with all fall protection lanyards.

Slo-StopLanyard1” yellow nylon webbing, 2’, 4’ or 6’ lengths, meets or exceeds ANSI Z-359.

MS-FAH-1 (with snap)MB-FAH-1 (with buckle)

HCB-B

The FAH MS & FAH MB beltsare furnished with leg straps,and shoulder straps. Thesebelts have the dual D-Ring sys-tem utilized for working theracking platform. These beltsalso come equipped with a D-Ring situated high between theshoulders for a lifeline ordeceleration device. The der-rick worker is able to usethese belts when workingthe racking platform.

The LewisHCB-B har-ness is a fallarrest harnessboatswain’sriding beltwith a built-inseat forensuredcomfort forextendedperiods oftime. (Can be used with or

without seat board.)

WARNING!!!Failure to use Lewis Derrick Belts as

detailed in the supplied user instructions,may result in serious injury or even death.

The purpose of the Lewis Tail Rope is to provide the user a means of work positioning. The Lewis tailrope is not intended for fall arrest, and / or fall deceleration. The user is required to utilize a decelera-tion lanyard, (Slo-Stop) or other type of fall deceleration device in addition to our tail rope. (See Photo)

ALWAYS USE THE SHORTEST TAIL ROPE POSSIBLE AND ALWAYS USE A FALL DECELER-ATION DEVICE. TAIL ROPES AND FALL DECELERATION LANYARDS (Slo-Stop) SHOULD BEARRANGED SO MAXIMUM FREE FALL IS 1.8 FEET (0.5 METERS).

NEVER WRAP THE TAIL ROPE OR FALL DECELERATION DEVICE AROUND ANY TYPE OFSTRUCTURE METALLIC OR OTHERWISE TO SHORTEN THE LENGTH OF SAID DEVICE. THISCREATES AN ABRASION POINT AND CREATES UNNECESSARY FALL HAZARDS.

The purpose of the Lewis Slo-Stop Lanyard is to provide the user a means ofFALL DECELERATION. The Slo-Stop Lanyard shall not be used as a workpositioning device.

Prior to each use, inspect the stitches which seal the Slo-Stop mechanism.(See Photo) If any of these stitches are torn or missing, immediately remove theSlo-Stop from service and replace with a new unit prior to performing any work.Prior to each use, the user must inspect all stitching and webbing of the Slo-Stopin question. Any fraying, missing or torn stitches tears or abrasions of the web-bing or exposure of the wear indicator shall indicate a need for immediatereplacement. Do not expose any Lewis Slo-Stop lanyard to any heat source, asthis can damage the webbing and create a fall hazard.

The purpose of the Lewis Retractable Lanyard line is to provide the user ameans of WORK POSITIONING. The Lewis Retractable Lanyard, either inthe single or dual configuration shall not be used as a fall deceleration or fallarrest device. The user is required to utilize a deceleration lanyard (Slo-Stop)or other type of fall deceleration device in addition to our RetractableLanyard. (See Photo)

Prior to each use, the user must inspect all stitching and webbing of theLanyard in question. Any fraying, missing or torn stitches, tears or abrasionsof the webbing, or exposure of the wear indicator, shall indicate a need forimmediate replacement. Do not expose any Lewis Lanyard to any heatsource as this could damage the webbing and create a fall hazard.

Made of finest grade plastic coated aircraft cable.

Available in 1’ through 14’ lengths in 1’ increments. Available with one snap hook and one 3” D-ring or snap hooks on both ends.

Lanyards & AnchorsLanyards & Anchors

NEW!Now Lewis offers expandable, shock absorbing Fall Protection Lanyards made ofhigh-visibility yellow nylon. Available in 2’, 4’ and 6’ lengths.

Some Lewis derrick belts and tail ropes can now beordered with “Stainless Steel” reinforcement. Pleaserequest “stainless” when corrosives will be presentwhile using the belt or tail rope (i.e. offshore drilling).

ExtensionTail2” yellow nylon webbing, Snap Hook on one end and 3” D-ring on the other.Available in 18” length. For use with all fall protection lanyards.

The Lanyard Anchor provides a place to tie-off. DO NOT tie off around sharp orjagged surfaces. Make sure the surface that you are tying off to is clean and freeof chemicals, sharp metal edges, welds, burrs or any other potential wear hazard.Always inspect the Lanyard Anchor prior to each use. A worn or damagedLanyard Anchor should be removed from service immediately and replaced.

The Extension Tail is for use with a safety belt. It enables the user to snap inand out more quickly. Always inspect the Extension Tail prior to each use. Aworn or damaged Extension Tail should be removed from service immediatelyand replaced. (see photo)

Type LSG-X Snake

NEWGRIP!

Lewis Rig Coversare manufacturedof best gradeheavy-duty oilfieldnylon. Covers areavailable for allsizes of enginehouses, derrickfloors, sub-struc-tures and fourbleboards.

The Lewis Derrick Light Safety Cable is a reliable way to protect againstthe potential drop hazard of a derrick light. Please read the Warning belowand leave tag attached to DLSC-1 for future reference.

Derrick LightSafety CableDerrick LightSafety Cable

Rig Housing& Covers

Rig Housing& Covers

PART # Breaking StrengthDLSC-1 450 lbs.

Warning!1. Do not install Derrick

Lights while personnel are below. Drop hazard.

2. Inspect safety cables frequently. If cablesare frayed or corroded, remove from service immediately.3. Inspect snap swivels frequently. Snaps that have malfunc-tioning springs, corroded hardware or distorted hardwareshould be removed and replaced immediately.4. Any safety cable that has been involved in a derrick lightbracket failure should be removed from service and replacedwith a new unit.5. Failure to properly install and inspect derrick light safety

cables may cause severe bodily injury or even death.6. THIS IS NOT A FALL PROTECTION DEVICE. Do not useas Fall Protection Equipment.

The LSG-X series performs the same function as the stan-dard LSG series. The LSG-X cannot be taken apart in themiddle, it is permanently attached via our new “Swivel Tube”Assembly.

This swivel tube assembly is a low profile heavy-duty fric-tion swivel. This snake is for the customer who does not needto separate the two pulling grip elements and who prefers avery low profile swivel. The swivel is permanently greased andhas the size range and working load clearly stenciled on theswivel tube assembly.

Heavy-DutySnake Grips Heavy-DutySnake Grips

Lewis Wire Rope Snake Grips arenow available in two types:

Standard LSG and the new LSG-X.

The Lewis Snake Grip expands or con-tracts to grip different or identical cableand/or rope sizes as per the customer’sneeds.

Save time stringing up, changing andunstringing because the snake requiresno special tools. The swivel and swinglink go smoothly through blocks and pre-vent line twisting.

Install new cable by using old existingcable as pulling line. Always seize theends of the grips by banding or taping.

Type LSG Snake

SIZE UTS WK. LD.REGULAR SIZE SNAKESTYPE LSG 1/4” - 1/2” 4,486 1,200TYPE LSG 1/2” - 1” 7,500 2,500 TYPE LSG 1” - 11/2” 10,000 3,500TYPE LSG 11/2” - 2” 12,000 4,000TYPE LSG 2” - 23/4” 16,000 5,000TYPE LSG 23/4” - 31/2” 20,000 6,500TYPE LSG 31/2” - 41/4” 24,000 8,000

SIZE UTS WK. LD.SPECIAL SIZE SNAKESTYPE LSG 1/4” - 11/2” 4,486 1,200 TYPE LSG 1/2” - 11/2” 7,500 2,500 TYPE LSG 1/2” - 2” 7,500 2,500TYPE LSG 1” - 2” 10,000 3,500TYPE LSG 11/2” - 21/2” 12,000 4,000

REGULAR SIZE SNAKESSwivel Work

SIZE O.D. Length UTS LoadTYPE LSG-X 1/4” - 1/2” 7/8” 3 1/2” 4,486 1,200TYPE LSG-X 1/2” - 1” 7/8” 2 1/2” 7,500 2,500 TYPE LSG-X 1” - 11/2” 1” 3 3/4” 10,000 3,500TYPE LSG-X 11/2” - 2” 1 3/8” 4 3/4” 12,000 4,000TYPE LSG-X 2” - 23/4” 1 3/8” 4 3/4” 16,000 5,000

SPECIAL SIZE SNAKESWork

SIZE UTS LoadTYPE LSG-X 1/4” - 11/2” 4,400 1,200 TYPE LSG-X 1/2” - 11/2” 7,500 2,500 TYPE LSG-X 1/2” - 2” 7,500 2,500TYPE LSG-X 1” - 2” 10,000 3,500TYPE LSG-X 11/2” - 21/2” 12,000 4,000

WARNING!!!READ THIS DOCUMENT BEFORE USING YOUR LSG SNAKEGUIDELINES FOR PROPER INSTALLATION AND USE OF LEWIS

TYPE “LSG SNAKE” ROPE & CABLE CONNECTOR GRIP1. Safety is always No. 1. Make sure no one is under the line as it is being pulled through the blocks and crown.

2. Be sure that the right size range grips being used for the line or rope being pulled. For example, for 13/8” drilling line,use the LSG 1 - 11/2” snake. When pulling a larger line with a smaller line (replacing the smaller with the larger), makesure the smaller line has the correct size grip and that the new larger diameter line has the correct size grip as well.LSG snakes are available with any required size range on either side.

3. Make sure the cable is clean and free of grease and oil in the area that will be loaded into the LSG snake. A highgrade degreaser and heavy duty disposable towels are recommended for this purpose.

4. When loading the cable into the grip, be certain the cable is inserted all the way into the grip until the grip is fullyloaded (into the plastic boot area below the pulling eye of the grip). Also examine both grips for cable abrasion or bro-ken cables. An LSG snake showing any signs of cable fraying, broken cables or distorted hardware should be immedi-ately discarded and replaced. Inspect the LSG Snake Grip prior to each use.

5. Once the snake is loaded properly, the tail end of the grip should be clamped using a Bandit brand banding device.

6. If you have any questions or comments regarding the safe usage of your LSG Snake, please call Toll Free: 1 - 8 8 8 - 3 9 8 - 4 7 1 9

LEWIS MFG. CO. • 3601 S. Byers (73129) • P.O. Box 95089 (73143) • Oklahoma City, Oklahoma405-634-5401 • Fax: 405-632-8608 • E-mail: lewismfg@aol.com • www.lewismanufacturingco.com

LEWIS MFG. CO. • 3601 S. Byers (73129) • P.O. Box 95089 (73143) • Oklahoma City, Oklahoma405-634-5401 • Fax: 405-632-8608 • E-mail: lewismfg@aol.com • www.lewismanufacturingco.com

5 6

WARNING!!! Failure to use Lewis Snake Grips as detailed inthe supplied user instructions, may result in serious injury or even death.

BAND-IT®

Banding Tools(Used to tie down ends of LSG Snake Grips, Pulling Grips andSplicing Grips for added security. Use with Band-It® free-end

clamps, roll band and clips, Jr. clamps, and SID clamps.)

Used to tie down ends of pulling grips and splicing gripsfor added security. Use a BAND-IT® tool and bands insteadof tape. Taping is not reliable and can be a safety hazardespecially in overhead high tension pulling applications.Also in many cases splicing grips are permanently installedand in these instances taping just won’t last and can bedangerous.

Invest in a BAND-IT® tool and rest assured your cable willstay in place. Please follow instructions provided with theBAND-IT® tool to ensure proper clamping.

The Thriftool requires a 1/2” socket or wrench, small ham-mer and cutting pliers while the Pok-it II requires only asmall hammer. Both are easy to operate. For the Pok-It II tool:

For the BAND-IT® Thriftool, use the same procedure except use a 1/2” socket for turning the winding mandrel

and cutting pliers to cut the band.

For use with our “LSG Snake Grips”Fits ALL sizes.

Wrap clamp around grip.Thread band throughbuckle, insert into noseof tool and feed throughslot in winding mandrel.

Turn the built-in ratcheton the winding mandrel totighten down the band.

L-208 BandConstructed of

#201Stainless Steel.

Model J-075Light Duty

Model J-020 Medium-Heavy Duty

Use the cutting lever to cutthe band and remove the tool.

Note: For extra strength,double-wrapping band isrecommended.

When the band is tight, flip thePok-It II tool over the buckle.

Use a hammer to flatten down theremaining tail and secure by tap-ping down the ears.

The finished productshould look like this. Werecommend double band-ing each grip end 4” to 6”apart and double wrappingeach band.

BAND-IT®

Pok-It II

BAND-IT® Thriftool

1

2

3

4

5

6

Larger Tools andBands Available.