Upload
habib-yargici
View
214
Download
1
Embed Size (px)
Citation preview
7/30/2019 LCFS-quickstartguide
1/15
Quick Start Guide
Lenovo Field Service
Solution
7/30/2019 LCFS-quickstartguide
2/15
Contents
Welcome to Lenovo Field Service Solution ........................................................................3
Lenovo Field Service Solution for DOS..............................................................................4
Starting Lenovo Field Service Solution for DOS.....................................................................................4
Running Lenovo Field Service Solution for DOS....................................................................................6
Lenovo Field Service Solution for Windows.......................................................................9
Starting Lenovo Field Service Solution for Windows..............................................................................9
Running Lenovo Field Service Solution for Windows.............................................................................9
User Interface Controls................................................................................................................9
Settings Editor............................................................................................................................10
For More Information........................................................................................................14
Lenovo Field Service Solution Quick Start Guide | TOC
7/30/2019 LCFS-quickstartguide
3/15
Welcome to Lenovo Field Service Solution
Welcome to Lenovo Field Service Solution, the most complete computer diagnostic software solution. Lenovo Field
Service Solution is a computer diagnostic and information gathering tool for PC service and support professionals,
including VARs, PC manufacturers, technicians and assemblers. Many top PC manufacturers use the same PC-Doctor
tools in manufacturing plants and service center facilities around the world.
Lenovo Field Service Solution provides hardware testing and system information gathering tools for both Microsoft
Windows and DOS operating systems. Lenovo Field Service Solution functions are performed through an easy-to-use
interface. Lenovo Field Service Solution for DOS provides access to command-line and batch fle functions. Lenovo
Field Service Solution can run without installing a single fle!
This guide will show you how to install and use Lenovo Field Service Solution, how to run PC diagnostics, and how to
gather system information in both Windows and DOS.
Lenovo Field Service Solution is delivered on a USB Drive provided by Lenovo TSC called a Golden Key.
Lenovo Field Service Solution functions and tools are divided into three general categories:
Table 1: Lenovo Field Service Solution General Categories
FunctionFeature
Hardware tests designed to determine if specifc devices function
correctly.
Diagnostics
Examines the PC hardware confguration and provides a detailed report
about all hardware components.
System Information
Allows you to create scripts for automating complete test runs.Script Editor
Lenovo Field Service Solution Quick Start Guide | Welcome to Lenovo Field Service Solut
7/30/2019 LCFS-quickstartguide
4/15
Lenovo Field Service Solution for DOS
Lenovo Field Service Solution for DOS provides low-level hardware testing and drive erase functions.
Starting Lenovo Field Service Solution for DOS
To start Lenovo Field Service Solution for DOS:
Note: Lenovo Field Service Solution for DOS must run in DOS; it cannot run under the Windows operating system
in a DOS window.
1. Power down the system.
2. Plug the Golden Key into an available USB port.
3. Re-boot the system from the Lenovo Golden Key USB CDROM.
The system will boot up and immediately launch the Lenovo Field Service Solution for DOS startup menu.
Figure 1: Golden Key Startup Menu
Lenovo Field Service Solution Quick Start Guide | Lenovo Field Service Solution for DOS
7/30/2019 LCFS-quickstartguide
5/15
4. select the Run LFSS Under DOS using the Up and Down Arrow keys and the Enter key. If you do not make a
selection in 50 seconds, the Run WinPE option will be executed.
5. Press the 1, 2, or 3 key on your keyboard to select from the USB driver options presented, or wait fve seconds for
LFSS to start automatically.
Figure 2: Golden Key Startup Under DOS Menu
This screen allows you to modify the default, automatic loading of the LFSS build. Some systems may have diffculty
identifying and loading the fxed disk device in the Golden Key This fxed disk contains a FAT16 partition suitable
for saving logs onto the Golden Key.The start options are:
1. Start LFSS Under DOS Directly: Use this menu selection if your system correctly loads the fxed disk on the
Golden Key. No drivers will be used to assist in fnding the fxed disk on the Golden Key.
2. Start LFSS Under DOS: By Loading a USB Driver Manually: Use this menu selection if your system does
not correctly load the fxed disk on the Golden Key and you want to manually select which drivers to load.
3. Start LFSS Under DOS By Loading USB Driver Automatically: Use this menu selection if your system does
not correctly load the fxed disk on the Golden Key and you want to automatically load the drivers to assist in
loading the disk. This menu selection attempts to automatically determine and load the drivers required.
Note: If the fxed disk (or public partition) on the Golden Key is identifed, the assigned logical name will be
displayed on screen for fve seconds as shown here.
Figure 3: Golden Key Startup Under DOS Menu
Lenovo Field Service Solution Quick Start Guide | Lenovo Field Service Solution for D
7/30/2019 LCFS-quickstartguide
6/15
Running Lenovo Field Service Solution for DOS
Three different menus are available: Available Tests, Available Tools, and Select Log Drive. Select the drive on which
you wish to log test results by pressing the key that corresponds to the drive letter shown in the menu. The drives shown
will vary depending on system confguration and the number of USB drives inserted. In the example shown below, press
the C key to select the public partition (drive C:) on the Golden Key or press the D key to select the virtual RAM disklabeled as D:.
Figure 4:The Lenovo Field Service Solution startup menu
After selecting a log option, you can run any of the other options in the Available Tests or Available Tools menu.
Lenovo Field Service Solution Quick Start Guide | Lenovo Field Service Solution for DOS
7/30/2019 LCFS-quickstartguide
7/15
Figure 5: Available boot menu options
The available features perform the following functions:
Table 2: Available Startup Menu Options
DescriptionOption
Runs a series of tests on the system CPU.CPU Test
Runs a series of tests on the system memory.Memory Test
Runs a series of tests on the video adapter.Video Adapter Test
Runs a small sub-test of hard drive tests: Controller, Funnel Seek, Random
Seek, Random Verify and SMART Status Test
Short Hard Drive Test
Run every available hard drive test except the SMART Self-Test Long.Extended Hard Drive Test
Run a series of tests on the system motherboard (CMOS, RTC Clock, IRQ
Controller, and so on).
Mother Board Test
Runs a series of tests on the system's I/O ports and keyboard.I/O Port Test
Runs a series of tests on optical drive devices.Optical Drive Test
Runs a series of tests on the system; often used to verify proper operation
after repair work is complete.
Test All After Repair
Runs a series of tests on the system excluding all hard drive and memory
tests.
Test All Except HDD & Memory
A stress-level test that runs a series of diagnostic exercises designed to
produce stress on the PC under test.
Max System Load (20 min)
Starts Lenovo Field Service Solution for DOS in standalone mode.Run Lenovo Field Service Solution for
DOS Standalone
Lenovo Field Service Solution Quick Start Guide | Lenovo Field Service Solution for D
7/30/2019 LCFS-quickstartguide
8/15
DescriptionOption
Specify where to store the test log.Change Log Drive
Displays hardware confguration information for the system.Show System Information
The header information contains the ASP name, service tech name, and
order number. It will be shown in the header of all test logs and reports.
Report/Log Header
Press F3 to save the header fle LCFS_LOG.HDR to the PCDR folder in
RAM Drive. This fle can also be saved in a more permanent location,
such as the public partition of the Golden Key. To use the fle, copy it to
the PCDR directory in the RAM drive whenever DOS is booted.
Set the loop test parameters. The number of test cycles or the minimum
time each test will run can be selected.
Pass Count / Min. Test Time
Note: Some devices, such as CD-ROM drives, pointing devices, PC Cards (PCMCIA), network cards, modems,
audio cards, SCSI devices and others require DOS device drivers to function in DOS. If you wish to test any of
these devices, you must load the supported device driver into memory before running the diagnostic.
Lenovo Field Service Solution Quick Start Guide | Lenovo Field Service Solution for DOS
7/30/2019 LCFS-quickstartguide
9/15
Lenovo Field Service Solution for Windows
Lenovo Field Service Solution for Windows provides hardware testing in the Windows operating system.
Starting Lenovo Field Service Solution for Windows
To start Lenovo Field Service Solution for Windows:
1. Boot the system in Windows.
2. Insert the Golden Key into an available USB port.
3. Open Windows Explorer and double-click the GoldenKey.exefle. This step may be skipped if the autorun feature
is turned on in the Windows environment.
4. Enter the Golden Key password in the dialog box that opens. The default password is "Lenovo".
5. In the eUnoBox VM environment, a tool bar is shown at the bottom of the screen. Click the LFSS icon to start LFSS.
Figure 6: The eUnoBox VM Environment Tool Bar
Running Lenovo Field Service Solution for Windows
The following describes Lenovo Field Service Solution for Windows features, how to navigate the user interface and
how to perform important functions like creating a test script and generating a report.
User Interface Controls
Lenovo Field Service Solution for Windows starts by displaying the Home pane. At the top are a row of tabs to access
functions and tools, such as the Diagnostics and Tools, Script Editor, System Information, Reports and My Links
tabs. Near the top is the button, which will take a snapshot of the system under test. For more information about
snapshots, see Generating a System Snapshotin the Lenovo Field Service Solution User Guide. The main body of the
Home pane contains links to predefned test scripts and is customizable to include links to your favorite diagnostics,
maintenance tools and so on. The System Information Summary, a brief report on the system confguration, appears
near the bottom of the Home pane. Lenovo Field Service Solution collects information for the report at runtime. The
report can be saved to a fle or printed with the buttons in the lower right of the screen. Click the button to test all
devices listed in the System Information Summary.
Real time information about the hard drive and CPU temperatures are displayed at the bottom of the page. Place the
cursor to the right of the information bar to scroll down for more information. Place the cursor to the left of the information
bar to scroll up. To print or save this information, use theReal Time View in the System Report. See Generating a System
Information Reportin the Lenovo Field Service Solution User Guide for more information.
Lenovo Field Service Solution Quick Start Guide | Lenovo Field Service Solution for Wind
http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-7/30/2019 LCFS-quickstartguide
10/15
Figure 7: The Lenovo Field Service Solution for Windows Home pane
Settings Editor
Lenovo Field Service Solution for Windows provides a central location to adjust all settings. To check or change settings:
1. Click the Tools menu item at the top of the Lenovo Field Service Solution for Windows screen.
2. Click the Settings option in the drop-down. The following settings appear on the frst screen:
| Lenovo Field Service Solution Quick Start Guide | Lenovo Field Service Solution for Windows
7/30/2019 LCFS-quickstartguide
11/15
Figure 8: The Lenovo Field Service Solution for Windows Settings Editor
a) Detailed test log information: By default, detailed device and test event information is included in test logs. To
shorten test log fles by including only summary information, uncheck one or both of the checkboxes shown.
b) Testing device prompts: By default, Lenovo Field Service Solution for Windows prompts the user for test
devices, such as test media or loopback adapters, only the frst time the device is required. Click one of the radio
buttons shown to change that behavior.
c) Number of links to display in My Links: By default, Lenovo Field Service Solution for Windows displays 10
links in the My Links area of the Home screen. Use the drop-down to select a different number of links to display,
from 1 to 20.
3. Scroll down to the bottom of the Setting Editor. The following settings appear:
Lenovo Field Service Solution Quick Start Guide | Lenovo Field Service Solution for Windo
7/30/2019 LCFS-quickstartguide
12/15
Figure 9: The Lenovo Field Service Solution for Windows Settings Editor
a) Printable System Report detail: The printable system report that you brand and give to your customers to show
what was done with their systems includes detailed system information by default. To shorten the report by
including only summary information, Summary System Information radio button.
b) Script launch behavior: By default, a script will run immediately when the script link is clicked. Click the Show
script confrmation radio button to require a confrmation before the script runs..
c) Test media removal reminder: By default, Lenovo Field Service Solution for Windows will remind the user
to remove test media when testing is complete. To receive a reminder, click the Remind to remove media radio
button.
4. Click the Snapshot Management tab. A list of all snapshots stored on the Golden Key appears:
| Lenovo Field Service Solution Quick Start Guide | Lenovo Field Service Solution for Windows
7/30/2019 LCFS-quickstartguide
13/15
Figure 10: The Lenovo Field Service Solution for Windows Snapshot Management pane
a) Remove or back up snapshots: All snapshots in the list are checked by default. Click the Remove button to
delete all snapshots that are checked, or click the Backup button to back up all checked snapshots to another
location.
b) Restore snapshots : Click the Browse button and navigate to a location containing snapshots and load them onto
the Golden Key.
Lenovo Field Service Solution Quick Start Guide | Lenovo Field Service Solution for Windo
7/30/2019 LCFS-quickstartguide
14/15
For More Information
Contact
PC-Doctor, Inc9805 Double R Blvd. Suite 301
Reno, NV 89521
Phone: 866-289-7237
Fax: 775-336-4099
E-mail: [email protected]
Web: http://www.pc-doctor.com
| Lenovo Field Service Solution Quick Start Guide | For More Information
mailto:[email protected]://www.pc-doctor.com/http://www.pc-doctor.com/mailto:[email protected]7/30/2019 LCFS-quickstartguide
15/15
Index
A
Available Tests 6
Available Tools 6
B
BIOS 9
bootable CD 6
D
diagnostic 6, 9
Diagnostics 3
Diagnostics and Tools 9
DOS 3, 4, 6, 9
H
Home 9
I
I/O 6
L
loopback adapter 6
Loopback Adapters 3
M
Microsoft 3
motherboard 9
My Links 9
P
PC-Doctor 3
PCI POST Card 3
Power Supply Tester 3
R
Reports 9
S
Script Editor 3, 9
Select Log Drive 6
startup menu 6
System Information 3, 6, 9
T
Test Devices 3
U
USB 6
User Interface Controls 9
V
virtual RAM disk6
W
Windows 3, 9
Lenovo Field Service Solution Quick Start Guide | Ind