Creating and running a simple hydraulic circuit.

Starting with Korf.

Interface

www.om

esol.

com

Take your cursor to feed and click on it.

Take the cursor and now click on the sheet to place feed on it. Same for the product and Control valve.

www.om

esol.

com

Now click on pipe to connect Feed with control valve and product.

After click on pipe take your cursor to feed you will see an ar

www.om

esol.

com

When arrow appears take the cursor to the end of control valve , here it will show a black arrow again

at the same time click at the end of the control valve. Now click on pipe again to join control valve and

product, follow the same procedure.

www.om

esol.

com

Hold down the left mouse button to drag the equipments. Move the equipment just to see whetherthey are connected or not.

Now click on the show specs icon as shown in the diagram.

www.om

esol.

com

When you click on specs it will show specs as shown in diagram.

Now click on Run Hydraulics Icon from the main menu bar. You will see the following result.

www.om

esol.

com

Now click ok and go to results tab from menu bar.

When you will click on Results icon following window will appear. Check the one you want to see theresult and click ok.

www.om

esol.

com

Result will be displaced as shown.

www.om

esol.

com