Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Call KEEN PUMP Today at 1-419-207-9400
Your Premier Pump ChoiceGrinder Pumps
Your Premier Pump ChoiceAccessories
Call KEEN PUMP Today at 1-419-207-9400TO
TAL H
EAD
(FEE
T)
CAPACITY (GPM)
PERFORMANCE
0 10 20 30 40 50
20
40
60
80
100
120
KLG2
Key Features* Strong, 2hp, 208/230 Volt Single Phase Motor* Triple-Sealed Potted Cord Cap Assembly* 3-Bearing Design for Maximum Life* Pressed-In Stator for Maximum Heat Dissipation* Upper & Lower Silicon Carbide Shaft Seals* 289 Cuts per Revolution (16600 per Second)* Combination 1-1/4” NPT and Flanged Discharge * Vortex Impeller Design Resists “Roping”
Specification Data* Applications: Residential Sewage* Capacities: to 43 GPM* Heads: to 106’ TDH* Max. Liquid Temp: 140° F Intermittent* Motor: 2hp (3450 RPM)* Electrical: 208/230V, 1ph * Operation: Manual* Impeller: Ductile Iron* Solids-Handling: Macerates Solids into Slurry* Power Cord: 20’(std), 12Ga., Type SJOW/SJOWA * Weight: 75 lbs
KLG2 Series
18 3
* Various Rail Liftout base disconnects Available for all Models* Liftout Check Valve Disconnects Available for 1-1/4” Discharge* Base Elbow Disconnects Available up to 24“ Discharge* Non-Rail Disconnects Available for 1-1/4” - 2” Discharge* SST Upper and Intermediate Rail Supports Available for all Models* Stainless Steel Chain Assemblies Available for all Models
Valu
e Fi
rst,
Not
Add
ed!
LIFTOUTS / DISCONNECTS
BASIN PACKAGES
CONTROL / ALARM PANELS
LPS DESIGN
* Turnkey Packages Built Per Keen Engineered Specifications* Custom Packages Built Complete Per Customer Specifications* 24” Dia. Thru 120” Dia, Basins* Depths Up to 20’ feet* Stainless Steel Rails, Guide Brackets, Chain, Handles* PVC or Stainless Discharge Pipe* Liftout Rails or Hard Piped* Basin Covers Fiberglass, Poly or Aluminum (With or without Access Door)* Inlet Hub Flexible Buna-N or Cast Iron* Discharge Hub Stainless Steel
* Engineered Control Panels in Simplex or Duplex Configuration* Custom Panels Built Per Customer Specifications* Enclosures Poly, Fiberglass or SST* All Panels Built to UL 508 Standard* Standard Components - Available Nationwide* Remote Alarm Panels
* Teardrop Float Switches Normally Open On-Off-HWA Level Controls* Mechanical w/Piggyback Plugs Available 115 or 230V* Floats Provided with or without Weights* SST Float Brackets or PVC Float Poles Available* Nema 6P Junction Box Assemblies
Call KEEN PUMP LPS Design Team Today for Complete Assistance on Your Next Low Pressure Sewer System Project!
FLOATS / BRACKETS / JUNCTION BOXES
KLG2
KPCG-21 & KPCG-21CSeries
KER Retro�t KTP Series
Call KEEN PUMP Today at 1-419-207-9400
Your Premier Pump ChoiceTrash Pumps
Your Premier Pump ChoiceGrinder Pumps
Call KEEN PUMP Today at 1-419-207-9400
TOTA
L HEA
D (F
EET)
CAPACITY (GPM)
PERFORMANCE
0 5 15 20
50
100
150
200
250
Key Features* Optional (1hp) Progressive Cavity or (2hp) Centrifugal * Fully Assembled for Quick and Easy Installation* Stainless Steel Discharge Pipe* Optional Float or Pressure Level Control* Internal Start Components (No Control Box Req’d)* No Modifications to Existing System* 3-Bearing Design for Maximum Life
4 17TO
TAL H
EAD
(FEE
T)
CAPACITY (GPM)
PERFORMANCE
0 500 1000 1500 3000 3500
40
60
80
120
140
Vers
atili
ty, F
lexi
bilit
y, D
eliv
ered
on
Tim
e!
2500200010 25
Key Features* Strong, 1hp, 208/230 Volt Single Phase Motor* Internal Start Component Option (No Control Box Required)* Triple-Sealed Potted Cord Cap Assembly* 3-Bearing Design for Maximum Life - Keyed SST Shaft* Pressed-In Stator for Maximum Heat Dissipation* Upper & Lower Silicon Carbide Shaft Seals* 253 Cuts per Revolution (7400 per Second)* Combination 1-1/4” NPT and Flanged Discharge * Scratch Resistant, Hardened Tool Steel Rotor* Wear Resistant, Special Compound Stator
Specification Data* Applications: Residential Sewage* Capacities: to 15 GPM* Max. Liquid Temp: 140° F Intermittent* Motor: 1hp (1750 RPM)* Electrical: 208/230V,1ph* Operation: Manual* Impeller: Ductile Iron* Solids-Handling: Macerates Solids into Slurry* Power Cord: 20’(std), 12Ga., Type SJOW/SJOWA * Weight: 90 lbs
2 HP
1 HP
4000 4500 5000 5500
20
100
KTP12
KTP10
KTP8KTP6
KTP2
KTP
3
KTP
4
Optional “Base Mount - Close Coupled”
Key Features* Sizes Available 2” through 12“* Maximum Capacity: 5150 GPM* Maximum Head: 176 Feet* Maximum Solids: 3”* 3“, 4” and 6“ Pumps in Stock* 3”, 4“ and 6” Rotating Assemblies in Stock* Parts Replacement Available* Pumps and Pump Assemblies Built and Shipped Complete