WANLAN

WANLAN

WANLAN W

ireless Sensor

FCC:xxxxx-xxxxxIC:xxxxx-xxxxx

KE2 Wireless SensorTracking Chart

12-Digit Sensor ID(alphanumeric) AC233FA044AB

XXXXXXXXXXXX

Example

Last 6 digits uniquely identify a specific sensor

Once your Tracking Chart is filled in, we suggest taking a picture of the list, to serve as a backup copy.

Sensor ID Location

Ex: A0 44 ABTo help you locate the sensor later, write a description of its

physical location. (Example: North wall walk-in cooler)

WANLAN

Laptop

Wireless - OR - Hardwire

WANLAN

Laptop, Tablet or Phone

Cable not included in kit.

MAC: E4:95:6E:4B:5B:F9WIFI ESSID: KE2EDGE-4B5BF9WIFI PW: AXPAWRVHMGMT LOGIN: ke2adminMGMT PW: ke2adminhttp://em35 or IP: 192.168.50.1FCC ID: 2AOPP-216345 IC:23545-21634FCC ID:XU8TBW106-107V2

Serial #:18162-118

Label from bottom of KE2-EM35.

KE2-EM35 broadcasts a WiFi signal with the SSID: KE2EDGE-xxxxxxSearch for the SSID, and connect to it.WiFi PW: • • • • • • • •

MAC: E4:95:6E:4B:5B:F9WIFI ESSID: KE2EDGE-4B5BF9WIFI PW: AXPAWRVHMGMT LOGIN: ke2adminMGMT PW: ke2adminhttp://em35 or IP: 192.168.50.1FCC ID: 2AOPP-216345 IC:23545-21634FCC ID:XU8TBW106-107V2

Serial #:18162-118

Label from bottom of KE2-EM35.

KE2-EM35 broadcasts a WiFi signal with the SSID: KE2EDGE-xxxxxxSearch for the SSID, and connect to it.WiFi PW: • • • • • • • •

WANLAN

❶ Attach the antennas

❶ B

❶ A

❸ Power Up ❹ Connect Network Cable

❺ Connect Network Cable to the Network

❻ Power up the sensor(s)Press button until blue blinking light comes on.

❼ Apply velcro or adhesive strip.

❽ Mount in preferred location.

❾ Record on track-ing chart.

❿ Connect Wirelessly or via Ethernet Cable.

Q.5.57-58-59 February 2019SIDE 1

© 2019 KE2 Connect Inc.12 Chamber Drive ▪ Washington, MO. 63090 ▪ ke2connect.io ▪ 636.266.4466

Customize your portal

Data logging setup Setup alarm noti�cations

System updatesAccess BACnet services

Data Logging Enabled

Displays active alarms

Up to 35 devices are automatically displayed on the dashboard

Published to KE2 portal

Alarm Noti�cations NOT Enabled

NOTPublished to

KE2 portal

Download, graph or view CSV �le

Setup and changes are made

Green shaded bar indicates the device is

published to the KE2 portal

KE2-EM35 Management Address & Firmware Version

Alarm Noti�cations Enabled

When log button selected, user prompted for date range.

BACnet ServicesEnabled

NOTE: Services are selected from the

Management Console

Access KE2- EM35 from Portal (future feature; with valid portal subscription)

Allow KE2 to manage/con�gure EM35 and all devices remotely

System updates

Automatically discover and display ONLY KE2 devices

BLACK icons indicate the service is Active for that device.

Tap to de-activate.

Global Selection - Enable service(s)setting for all devices.

Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.

*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.

Tested to 50 devices with-out noticeable loss of speed.

Allows user access to webpages through the WAN interface

WHITE icons indicate the service is Inactive for that device.

Tap to activate.

Discovered KE2 devices

Enter e-mail or text addresses for noti�cations & preferred “Subject” line (If multiple addresses are entered, use a comma to seperate each address)

Setup or change the Portal Site name and Password

Establish the frequency that data points are logged

Updates & advanced con�gurations

Enable the BACnet Services

Update Firmware button is displayedClicking the button automatically up-dates �rmware to the latest version.

Management Console Setup

Setup Dashboard From Dashboard Access Management Console Page

Management Console Page

⓫ Launch web browser

⓬ Enter 192.168.50.1 in address bar.

Management Console Mobile View - LandscapeManagement Console Mobile View - Portrait

Activate Device ServicesBlack icon is Active, White icon is Inactive. Tap Icon to change color.

Access KE2- EM35 from Portal (future feature; with valid portal subscription)

Allow KE2 to manage/con�gure EM35 and all devices remotely

System updates

Automatically discover and display ONLY KE2 devices

BLACK icons indicate the service is Active for that device.

Tap to de-activate.

Global Selection - Enable service(s)setting for all devices.

Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.

*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.

Tested to 50 devices with-out noticeable loss of speed.

Allows user access to webpages through the WAN interface

WHITE icons indicate the service is Inactive for that device.

Tap to activate.

Display on the Local Dashboard

Published to Cloud/Internet/Remote*

Alarm Notifications are Active*

Data Logging Enabled

BACnet Services Enabled*

* Requires additional configuration when activated. See Management Console Setup.

Access KE2- EM35 from Portal (future feature; with valid portal subscription)

Allow KE2 to manage/con�gure EM35 and all devices remotely

System updates

Automatically discover and display ONLY KE2 devices

BLACK icons indicate the service is Active for that device.

Tap to de-activate.

Global Selection - Enable service(s)setting for all devices.

Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.

*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.

Tested to 50 devices with-out noticeable loss of speed.

Allows user access to webpages through the WAN interface

WHITE icons indicate the service is Inactive for that device.

Tap to activate.

Access KE2- EM35 from Portal (future feature; with valid portal subscription)

Allow KE2 to manage/con�gure EM35 and all devices remotely

System updates

Automatically discover and display ONLY KE2 devices

BLACK icons indicate the service is Active for that device.

Tap to de-activate.

Global Selection - Enable service(s)setting for all devices.

Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.

*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.

Tested to 50 devices with-out noticeable loss of speed.

Allows user access to webpages through the WAN interface

WHITE icons indicate the service is Inactive for that device.

Tap to activate.

Access KE2- EM35 from Portal (future feature; with valid portal subscription)

Allow KE2 to manage/con�gure EM35 and all devices remotely

System updates

Automatically discover and display ONLY KE2 devices

BLACK icons indicate the service is Active for that device.

Tap to de-activate.

Global Selection - Enable service(s)setting for all devices.

Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.

*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.

Tested to 50 devices with-out noticeable loss of speed.

Allows user access to webpages through the WAN interface

WHITE icons indicate the service is Inactive for that device.

Tap to activate.

Access KE2- EM35 from Portal (future feature; with valid portal subscription)

Allow KE2 to manage/con�gure EM35 and all devices remotely

System updates

Automatically discover and display ONLY KE2 devices

BLACK icons indicate the service is Active for that device.

Tap to de-activate.

Global Selection - Enable service(s)setting for all devices.

Management Console will display all* of the KE2 devices connected to the Network directly, or through the KE2-EM35s.

*While theoretically unlim-ited, performance speed will vary based on the number of connections / devices.

Tested to 50 devices with-out noticeable loss of speed.

Allows user access to webpages through the WAN interface

WHITE icons indicate the service is Inactive for that device.

Tap to activate.

KE2 Edge ManagerKE2-EM35

WANLAN

❷ Attach the Bluetooth Adapter

IMPORTANTTo ensure the sensors have the strongest wireless connection possible, please follow the steps in:Video 125 - Best Practices for Deploying a Wireless Moni-toring Solution.

Con�rming ChangesThe bottom half of the Dialog Boxes/Pop-ups will typically show the options OK, Suppress Dialogs, and Cancel.

Other Dialog Boxes / Pop-ups

LocationEnter the description from your Sensor Tracking Chart.

The defaults are:User: ke2adminPassword: ke2admin

Sensor LoginPrior to making changes, you will be prompted for the case-sensitive password.

OK - Con�rm value change

Supress Dialogs - DO NOT CLICK Prevents Dialog Box/Pop-Up from appearing.

Cancel - Revert to previous value

Primary Dialog Boxes / Pop-ups

GraphsShows the tempera-ture & humidity for the time frame de�ned by the user.

Disconnect

Access & Set: Hi Temp Alarm Setpoint

Access & Set: Hi Temp Alarm Delay

Access & Set: Low Temp Alarm Setpoint

Access & Set: Low Temp Alarm Delay

Access & Set: Hi Humidity Alarm Setpoint

Access & Set: Hi Humidity Alarm Delay

Access & Set: Low Humidity Alarm Setpoint

Access & Set: Low Humidity Alarm Delay

Set the minutes after Low Temp Alarm

Setpoint is exceeded, before an alarm is sent.

Set the lowest temperature allowable before triggering the Low Temp Alarm Delay.

Set the minutes communication can be absent to initiate a Tempo-rary Loss of Communication Alert.

Set the minutes communication can be absent to initiate a Perma-nent Loss of Communication Alert.

Set the minimum battery threshold to send out an Alert.

Set the highest temperature allowable before triggering the Hi Temp Alarm Delay.

Set the number of min-utes after Hi Temp Alarm Setpoint is exceeded, before an alarm is sent.

Set the highest humidity allowable before trigger-ing the Hi Humidity Alarm Delay.

Set the minutes after Hi Humidity Alarm Setpoint is exceeded, before an alarm is sent.

Set the lowest humidity allowable before trigger-

ing the Low Humidity Alarm Delay.

Set the minutes after Low Humidity Alarm Setpoint

is exceeded, before an alarm is sent.

offset

offset

Temp - Clicking toggles between ºF & ºC

Sensor Calibration Used to match sensor reading to known temperature or humidity value

Device Loss Low Battery

Q.5.57-58-59 February 2019SIDE 2

KE2 Wireless SensorsAlarm Notification Setup

Last 6 digits uniquely identify a specific sensor

Once your Tracking Chart is filled in, we suggest taking a picture of the list, to serve as a backup copy.

FCC:xxxxx-xxxxxIC:xxxxx-xxxxx

KE2 Wireless SensorTracking Chart

12-Digit Sensor ID(alphanumeric) AC233FA044AB

XXXXXXXXXXXX

Example

Sensor ID / MAC Location

Ex: A0 44 AB To help you locate the sensor later, write a description of its physical location. (Example: North wall walk-in cooler)

Sensor ID / MAC Location

KE2 Wireless SensorsTracking Chart

Last 6 digits uniquely identify a specific sensor

Once your Tracking Chart is filled in, we suggest taking a picture of the list, to serve as a backup copy.

FCC:xxxxx-xxxxxIC:xxxxx-xxxxx

KE2 Wireless SensorTracking Chart

12-Digit Sensor ID(alphanumeric) AC233FA044AB

XXXXXXXXXXXX

Example

Last 6 digits uniquely identify a specific sensor

Once your Tracking Chart is filled in, we suggest taking a picture of the list, to serve as a backup copy.

FCC:xxxxx-xxxxxIC:xxxxx-xxxxx

KE2 Wireless SensorTracking Chart

12-Digit Sensor ID(alphanumeric) AC233FA044AB

XXXXXXXXXXXX

Example

© KE2 Therm Solutions, Inc . Washington, MO 63090Q.5.57-58-59 February 2019 supersedes Q.5.57-58-59 August 2018 and all prior publications.

KE2 Therm Solutions, Inc . 12 Chamber Drive . Washington, MO 63090636.266.0140 . www.ke2therm.com