Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
TENT STRUCTURESwe produce for you
WE CREATE WITH PASSION
- Protan AS – Norway. In 1939, the company which designed
dand started to manufacture the first rubber coated life jackets
was established in Drammen. At present, the company
produces world-renowned niche PVC products, including
roof membranes;
- Elmark Hale – Poland. In 1989, company manufacturinga
and assembling tent structures – then little known in Poland –
was established in Steszew near Poznan.
In 2008, Protan AS merged with Elmark Hale to form the basis of the
present company.
Today, our chief assets are a combination of wealth of experience
and the use of state-of-the-art technology in the production of our
structures. It is possible to encounter our products on as many as
four continents and this is just the beginning for us. Our aspirations
are much higher.
Hopefully, the products presented in this catalogue will prove to be
of interest to you. Please consider this an invitation to work with us.
The history of Protan Elmark brand is the history of two
companies:
TABLE OF CONTENTS
STORAGE WITH GABLE ROOFSTRUCTURES
STEEL FRAMED STORAGE STRUCTURES WITH GABLE ROOF
STRUCTURES WITH HIPPED ROOF
STRUCTURESINDUSTRIAL INSULATED
SPORTS ARENAS WITH GABLE ROOF
SPORTS ARENAS WITH HIPPED ROOF
MARQUEES
EVENT HALLS
TRADE STANDS
DOME TENTS
DESIGN AND PRODUCTION TECHNOLOGY
ASSEMBLY SYSTEM
EMPLOYEES
CONTACT DETAILS
5
7
9
11
13
15
17
19
21
23
25
26
27
28
5
STORAGE STRUCTURES
WITH GABLE ROOF
120x67,5x3mm 169x97x3mm 230x110x3mm 256x130x4/3mm 260x132x6/4mm
330x135x8/5mm
snow load
main profile
side covering
height
width
20 / 50 / 75 / 90 kg/m2
The storage is a feature with roofstructure semi permanent a
ing manufactured fromcover PVC-coated polyester fabric. The
covering of the side walls and end walls is available in various
options: the most popular ones include PVC-coated fabric,
single skin steel sheet insulatedor sandwich panel.
The storage with gable roof many applicationsstructure has .
They are an excellent alternative to brick buildings or typical
buildings with steel covered roofs.permanent
Their fundamental advantages include:
- low comp cost;arative
reimbursement when resalling as the structures are modular,
they can be lengthened at any time during their use;
- financing by leasing with a low initial payment, which does
large capital outlaynot require ;
- eliminating time-consuming construction works and limiting
them to subgrade preparation only;
We manufacture aluminium framed structures with gable roof
in standard widths ranging from 10 to 40 metres and with
hipped roof – ranging from 15 to 40 metres. The frames are
made from rectangular box aluminium profiles. For added
strength, we additionally use a steel-cable bracing system.
6
169x97x3mm 230x110x3mm 256x130x4/3mm 260x132x6/4mm
2,5m - 5,5m
- ;the structures can be moved and relocated with relative ease
TECHNICAL DATA
PVC; single skin steel; layered sheet metal
- lower investment risk – due to the possibility of partial
7
STEEL FRAMED STORAGE
STRUCTURES WITH GABLE ROOF
We manufacture the steel structures with gable roof,
in standard widths of 10 and 15 metres, with the option of using
single skin steelPVC or on the side walls. They are made
from box profile frames to form a truss construction.
truss structure
20 / 50 / 75 / 90 kg/m2
The design of such facilities the need for the structureliminates al
with the ation ofreinforcement install transverse cable bracing.
Therefore, the steel framed structures are particularly
maximise theirrecommended to those customers who want to
storage height.
8
main profile
height
width
PVC; single skin steel; layered sheet metal
snow load
side covering
TECHNICAL DATA
STRUCTURES
WITH HIPPED ROOF
9
20 / 50 / 75 / 90 kg/m2
This type of product is available two options of side wallswith
coverings: one fully covered with PVC fabric, the other with
single skin steel. It is an economically viable solution, yet the
price is not the only advantage.
It is worth noting that in all our aluminium structures the
covering is divided according to segmentation, which
improves its tension and makes it easier for the user to repair
any damage to the covering.
Still, the main advantage of the halls with hipped roof is a
significant usable and storage height. These structures
loading wiresrequire no transverse snow installed at the eaves
height.
10
169x97x3mm
230x110x3mm
230x110x3mm
256x130x4/3mm
256x130x4/3mm
260x132x6/4mm
2,5m - 5,5m 2,5m - 5,5m 2,5m - 5,5m
main profile
height
width
PVC; single skin steel; layered sheet metal
snow load
side covering
TECHNICAL DATA
INDUSTRIAL INSULATED
STRUCTURES
11
260x132x6/4mm
330x135x8/5mm
20 / 50 / 75 / 90 kg/m2
The industrial with insulated PVC roof have their sidestructures s
insulatedwalls covered with either sandwich panel or insulated
have many uses, for examplePVC fabric. These facilities storage
facilities and have also been used as productionor workshop
facilities.
For application requirementsthis , depending on customer , we
insulateduse sandwich panel systems or double insulated PVC
single skin steel sheetcovering, whereas is used less often.
The roof is covered with two PVC layers with insulating
membrane between them.
12
120x67,5x3mm 169x97x3mm 230x110x3mm 256x130x4/3mm
169x97x3mm 230x110x3mm 256x130x4/3mm 260x132x6/4mm
2,5m - 5,5m
main profile
height
width
PVC; single skin steel; layered sheet metal
snow load
side covering
TECHNICAL DATA
SPORTS ARENAS
WITH GABLE ROOF
13
20 / 50 / 75 / 90 kg/m2
Sports are as provide a reliable roof covering for football pitches,n
gymnasiums, tennis courts and riding arenas.
Our sports arenas with gable roof can be adjusted toeasily
Various applicationsmeet the needs of various sports. for the
these structures, which offer full protection against wind, rain or
also andsnow include skating rinks go-carting tracks.
14
260x132x6/4mm
330x135x8/5mm
120x67,5x3mm 169x97x3mm 230x110x3mm 256x130x4/3mm
169x97x3mm 230x110x3mm 256x130x4/3mm 260x132x6/4mm
2,5m - 5,5m
main profile
height
width
PVC; single skin steel; layered sheet metal
snow load
side covering
TECHNICAL DATA
SPORTS ARENAS
WITH HIPPED ROOF
15
20 / 50 / 75 / 90 kg/m2
We recommend the facilities with hipped roof for sports
requiring a height above playing field of more than 10 m, e.g.
football or tennis.
Sports need space. Tennis courts or football pitches, go-carting
fully enclosedtracks or shooting ranges – a pitch allows
enjoy any type of competitionsupporters to regardless of
weather conditions.
16
169x97x3mm 230x110x3mm 256x130x4/3mm
230x110x3mm 256x130x4/3mm 260x132x6/4mm
2,5m - 5,5m 2,5m - 5,5m 2,5m - 5,5m
main profile
height
width
PVC; single skin steel; layered sheet metal
snow load
side covering
TECHNICAL DATA
MARQUEES
17
20 / 50 / 75 / 90 kg/m2
For more d customers:our iscerning
- insulatedsolid glass and/or sandwich panel side walls;
Today, it is difficult to imagine any outdoor event without a
high qualitymarquee. Lightweight structures built from
aluminium profiles are an optimum solution. Our products are,
their pleasant appearancefirst and foremost, characterised by
the estcombined with high durability due to the use of high
quality materials.
We propose a wide variety of :options including
- ed ;colour fabrics
- scover printed with digital graphics;
- window wallsvarious forms of transparent PVC ;
- two-piece wallsdecorative soffits and ;
- walling - options for roll up lace up walls;
- fitted zed safety glasswindows with double gla ;
- part or fullydoors – single or double doors; glazed;
Uwith aluminium or PVC frame;
- awningsentrance and extensions;
- partitioning systems;
A wide offer of extras makes each our exceptionalof marquees
and unique.
18
260x132x6/4mm169x97x3mm 230x110x3mm 256x130x4/3mm120x67,5x3mm
2,5m - 4m 2,5m - 4m 2,5m - 4m 2,5m - 4m 2,5m - 4m
30 m
main profile
height
width
PVC; single skin steel; layered sheet metal
snow load
side covering
TECHNICAL DATA
EVENT HALLS
19
20 / 50 / 75 / 90 kg/m2
A significant advantage of is their highour temporary structures
fast andmobility ensuring their efficient assembly and disassembly.
We can also offer full training so that you can build and use your
marquee whenever it’s convenient to you.
More and more often, organisers of , coevent exhibitions rporate
one off ourand events, as well as stage performances use
viablespectacular and economically solutions, i.e. lightweight
aluminium structures.
Our temporary structures are highly attractive due to their extras
such as:
- windows;
- ;interior pleated linings
- doors;
- various floor types.
These and many other extras create extremely professionalan
and are used widely forand, at the same time, elegant effect
s, , and much,weddings, fêtes, concerts, banquet parties picnics
much more.
20
260x132x6/4mm169x97x3mm 230x110x3mm 256x130x4/3mm120x67,5x3mm
30 m
2,5m - 4m 2,5m - 4m 2,5m - 4m 2,5m - 4m 2,5m - 4m
main profile
height
width
PVC; single skin steel; layered sheet metal
snow load
side covering
TECHNICAL DATA
TRADE STANDS
21
The main advantage of our tents is their .versatility
They are ideally suited for a variety of occasional or sports
events, as well as fairs and exhibitions. They are an excellent
supplement to trade or catering stands as they attract
tylecustomers due to their s and aesthetic features.
The PVC covering is durable It is easy toextremely . clean
and does not absorb moisture. At the customer's request, we
also manufacture coverings with graphics.
Our tents can also be used safely in severe weather conditions.
yetDue to their solid simple aluminium profile based structure,
the tents can be quickly assembled and easily transported.
Our offer includes tents in various shapes: with 3mx3m; 4mx4m
or 5mx5m square base, hexagonal with a diameter of up to 10m;
with a pyramid-shaped roof, so called „Turkish” roof or with
W also4.6mx4.6m; 5mx5m and 4.6mx7m skylights. e offer
modular in thsgable roof tents 5m or 6m wid .
22
TECHNICAL DATA
Turkish tents
size
diameter
size
size
size
Hexagonal turkish tents
Tents with a roof light
Tents with two roof light
Segment tents
segment every 3m
DOME TENTS
23
Our offer includes an exceptional product range: dome tents.
They are also referred to as spherical tents or domes.
an exciting,A spherical structure allows space to be developed in
contemporary shape. Thanks to this, you can present your
an unique architecturalcustomers or guests entirely impressions.
Our products are already used by customers from France,
England, Germany, Sweden, Switzerland and Saudi Arabia.
haveWe executed orders including a dome tent of 37 m in
diameter for VOLVO, Sweden and dome tents for the needs of the
GOT TO DANCE Programme in London.
The applications of spherical tents include catering events, fairs
and exhibitions, as well as projection meetings and conferences.
The idea for dome tents was conceived in the US in the 1970s.
The innovative design of the dome tents was drawn up by
Pacific Domes, which launched them onto the world markets.
being in partnership hemWe have the pleasure of with t .
24
height
surface
diameter
side covering
TECHNICAL DATA
DESIGN AND PRODUCTION
TECHNOLOGY
We have our own design department. Each isof our products
an Everymanufactured by using individually drawn up design.
structure’s andstrength performance is calculated and verified by
our designers.
We also create : we draw up customisedbespoke structures
all ourdesigns to meet the needs of customers.
For each order , the customer is provided with technicalplaced all
yourdocumentation necessary to prepare project.
Based on our long-standing experience, we have developed and
optimised our standard structure dimensions so that a short lead
metertime and very low cost of development per can be achieved.
We have one of the largest and most modern stock of
manufacturing tools in the industry, which guarantees our
customers the highest quality of our products and completion
of orders in a timely manner. We maintain a high level of output
market leaders ,thanks to top class HF machines from FIAB
to the estusing high-frequency waves for the PVC welding high
strength.
When executing orders production phase, we strictlyduring
control the course of processes to maintain the highest level of
This ourquality. is dealt with by long-serving qualified staff in
our Production and Logistics Departments.
We demand a lot from suppliers to meet high qualityour our
requirements for materials and their delivery dates. There is one
partnerships with both suppliers andgoal – long-term, reliable
customers.
25
We understand our customers and know how important it is for
them that the structure assembly starts on the planned date and
runs smoothly and without delays.
In addition to employee qualifications, the assembly rate is
havealso determined by the solutions we developed, allowing
us to prefabricate many components during production. Such an
approach allows us to eliminate time-consuming work during
the assembly. Moreover, it minimises delays due to unfavourable
weather conditions.
Our qualified and experienced assembly teams are our chief asset.
our structures for all typesThey have already erected hundreds of
of applications many different circumstances. Health and Safety is
of vital importance to our assembly teams, as is their cooperative
manner and attention to detail.
26
ASSEMBLY SYSTEM
Engineering Department Logistics, Production and Quality Control Department
Sales Department
Protan Elmark Sp. z o.o. employees
27
Export Department
Joanna Prokopiuk Łukasz Krzymieniecki Krystian Sałek Aleksandra Wudarczak Michał Janiszczak
Klaudia PiechowiczMarcin Janowski
Dominika Kościelniak Joachim Kozaczewski Magdalena Bieńkowska
Bartosz Józefczak Tomasz Brychcy
Renata Polaczyk Bernadeta Grębowicz Emilia Dawidowicz
Robert Frycz Maciej Napierała Szymon Cyprych
Managing Director
Piotr Bąkowski
Administration Department
Małgorzata Pietraszko
Protan Elmark Sp. z o.o.
62-060 Stęszew Dębienko, ul. Czereśniowa 1, POLAND
tel. +48 61 8134 523, +48 61 8135 348,
+48 61 8195 074, +48 61 8195 496
e-mail: [email protected]
NIP: 777-305-57-80, KRS: 0000307900,
REGON: 300857027
Initial capital: 6 670 000 PLN
Entered in the Entrepreneurs Register of
the National Court Register in the District Court
ACCOUNT NUMBER DnB Polska S.A.:
PLN 35 2190 0002 3000 0046 2899 0101
EUR PL35 2190 0002 3000 0046 2899 0201
GBP PL02 2190 0002 3000 0046 2899 0501
NOK PL50 2190 0002 3000 0046 2899 0801
SWIFT: MHB FPL PW Bank DnB POLSKA S.A.
CERTIFICATECONFORMITY OF THE FACTORY PRODUCTION CONTROL
0035-CPR-1090.1.00946.TÜVRH.2014.001
CERTIFICATEEN ISO 3834-3
CERTIFIED
TÜV Rheinland®
Contact details
28
Protan Elmark Sp. z o.o.
ul. Czereśniowa 1 Dębienko
62-060 Stęszew, POLAND
tel. +48 (61) 8134 523