Introducing GAC’s New Line of Intelligent Generator Set Controllers

The InteliSys• Stand-By, Prime Mover (single and multiple set), and Parralel to Utility (single and multiple set) Applications• Features:

320 x 240 LCD16 / 14 Discrete Inputs and Outputs (Configurable) Expandable

to 128 / 704 Analog Inputs (Fuel Level, Coolant Temp., Oil Press.)

Expandable to 68 and 1 Analog OutputSpeed Measurement (Mag Pick-Up)3 Phase Generator / Utility Voltage 3 Phase Generator / 1 Phase Utility Current MeasurementRS232 for Direct CommunicationRemote Communication (Analog, Internet, and GSM)

InteliSys Connections

1 Phase Utility Current

3 Phase GeneratorCurrent 3 Phase Generator /

Utility Voltage

16 Configurable Discrete Inputs

RS232 for direct and modem connection

CAN ConnectionFor Extension Modules

CAN Connection for Multiple Set Applications

InteliSys Connections Cont.Load Sharing Line

Governor Output

Output for AVRi Interface

Analog Output

4 Analog Inputs

Mag.Pick-up

2 Relay Outputs(Starter, Fuel Solenoid)

14 Configurable Discrete Outputs

12 or 24 V DC

InteliSys’s Versions

InteliSys has three versions depending on the application it is intended for:

• iS-PCM, Power ControlFor single sets that will parallel with the Utility.

• iS-PCLSM, Power Control with Load SharingFor multiple sets that may or may not parallel with the Utility.

• iS-PCLSM-PMS, Load Sharing and Power ManagementThe same as PCLSM with the added features of Voltand PF control.

• AVR control (needs 18 V AC power supply)• Expandable I / O• Communications

• Modem Support (multiple set applications, iG-MU)• Internet Support (iG-IB)

InteliSys’s Modules

iS-BIN16/8

• CAN Communication with InteliSys• 16 Discrete Inputs and 8 Discrete Outputs• Must Assign Controllers Address in InteliSys and on Module• Up to 7 of these modules can be Connected to InteliSys

AVRi Module

Input from PCLSM

18 V AC Power Supply

Output for AVR Control

DIN Rail Mounting

Output Level Adjustment (turn pot)

iS-AIN8• CAN Communication with InteliSys• 8 Analog Inputs• Must Assign Controllers Address in InteliSys and on Module• Up to 8 of these modules can be Connected to InteliSys

InteliMains: InteliGen With Special Software

• Mains (= Utility) Circuit Breaker Control–Reverse Synchronization–Vector surge protection (locally required)

• Power Management - Engine Usage Optimization–Number of running engines: Dependent on required load–Engine starting order: Dependent on running hours

• Import/Export Control

Parallel To Utility & Other Gen Set’s

G

GiS-PCLSM

InteliMains

iS-PCLSM

InteliSys’s User Friendly Operating Software

• Free•User Friendly• PC Format

Controller Setpoints

ValuesHistory

Value Screen

All Metered Values in Real Time.

Screen Selection

Metering

History

• Every Action Logged• All Values Associated w/ that Action• Up to 177 events (FIFO)

Controller• Same as Keypad• Essential Metering• Alarm List

Setpoints• Change any Setpoint • Current Value• Range

Screen Selection

Value

Acceptable Rangefor Parameter

Customizable Software• Parameters

Nominal RPM 80 300• Multilingual Texts

Overspeed Überdrehzahl Sobrevelocidad• Units

°C °F; kPa bar psi• Controller Operating Mode

SPM SSB SPtM MINT MEXT• Text

Water temp Coolant temp

Local connection to the Control System

Modem connection to remote monitoring*

SMS (Mobile phones) connection*

Internet connection*

Communications

Controller Screens

Water Temp 91°C

Oil Pressure 5.1bar

Fuel level 75%

Battery voltage 25.2V

• Analog Meters• Bar Graphs• Numeric Values• Controller Screens Allow for Similar Interface as WinEdit Software

MAINS:230 228 233V 50.0Hz GENERATOR: 1517RPM221 223 220V 50.6Hz872 896 932A 0.98L 183 194 208kW 118kVAr

Running in Island

Setpoint Adjustment

PARAMETERS MF-Start Delay 3sStart Attempts 5 Mains OK-Delay 10sCooling time 30s

• Adjustable via iS Keypad• Three Level Password Protection

History Screens

121 125 124A 62kVAr 27 29 29kW 72 73 71A 48kVAr 17 18 16kW 0 0 0A 0 0 0kW 0 0 0A 0 0 0kW

-15 FINISHED HOUR 07:00:00 16.10.-16 GCB CLOSED-ISLAND 06:23:53 16.10.-17 ENGINE START 06:23:49 16.10.-18 MF-MCB OPENED 06:23:44 16.10.

85kW 1503RPM 0.81L 88C 6.1bar 24.9V 84% 50kW 1495RPM 0.72L 25C 5.3bar 24.7V 87% 0kW 0RPM - 22C 0.0bar 25.8V 87% 0kW ORPM - 22C 0.0bar 25.8V 87%

M 0 0 0V 0.0HzG233 227 229V 50.1HzM 0 0 0V 0.0HzG230 228 223V 49.8HzM 0 0 0V 0.0HzG 0 0 0V 0.0HzM190 195 201V 48.7HzG 0 0 0V 0.0Hz

• History Events Can be Viewed From iS Screens as well as WinEdit• Viewed on Multiple Screens

• Adjustable Delay Settings• Five Protective Actions

– Warning– Slow stop – Shut-down – Unloading – History Record

• Reset Function (Horn + Flashing Light)

Protection Handling

Protections

• Generator / Utility Over / Under Voltage and Frequency• Voltage and Current Asymmetry• OverCurrent• OverLoad• Oil Pressure (two level: warning, shutdown)• Coolant Temp. (two level: warning, shutdown)• Fuel Level (two level: warning, shutdown)• …

SummaryThe InteliSys offers solutions to applications you have

never dreamed of.

GAC Leaves it up to You to Make the Intelligent Choice!!