Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
FS-300 SYSTEMINSTRUCTIONS
1
2
FS-300 SYSTEMTABLE OF CONTENTS
3
FS-300 SYSTEMGENERAL INSTALLATION NOTES
7. Aluminum surfaces in contact with lime-mortar, concrete or other masonry materials, shall be protected with
alkali resistant-coating.
Note: Perimeter sealing of the product to the substrate is not covered under this document. Please refer to the
product's notice of acceptance or Florida building code approval for specifics.
All perimeter caulking and waterproofing should comply with the above mentioned documents and sealant
compatibility and performance should be designed for specific job conditions.
Failure to have an adequate barrier will lead to water intrusion.
4
FS-300 SYSTEMPARTS IDENTIFICATION
5
FS-300 SYSTEMPARTS IDENTIFICATION (Continued)
6
FS-300 SYSTEMTYPICAL WINDOW DETAILS: 9/16" THK. LAM. GL.
7
FS-300 SYSTEMTYPICAL WINDOW DETAILS: 1 5/16" THK. LAM./INS. GL.
8
FS-300 SYSTEMTYPICAL WINDOW DETAILS: 1 5/16" THK. LAM./INS. GL. & T.B.
9
FS-300 SYSTEMTYPICAL WINDOW DETAILS: AT DOOR & TRANSOM.
10
FS-300 SYSTEMFABRICATION: ASSEMBLY SCREW
11
FS-300 SYSTEMFABRICATION: SPECIAL NOTCHES
12
FS-300 SYSTEMSYSTEM ASSEMBLY
13
FS-300 SYSTEMSYSTEM ASSEMBLY (Continued)
14
FS-300 SYSTEMSYSTEM INSTALLATION
15
FS-300 SYSTEMSYSTEM INSTALLATION (Continued)
16
FS-300 SYSTEMSYSTEM INSTALLATION (Continued)
17
FS-300 SYSTEMGLAZING: 9/16" THK. LAM. GLASS
18
FS-300 SYSTEMGLAZING: 1 5/16" THK. LAM./INSULATED GLASS
19
FS-300 SYSTEMGLAZING: 1 5/16" THK. LAM./INSUL. GL. THERMAL BARRIER
20
FS-300 SYSTEMSTEEL REINFORCEMENT