Upload
felipe-douglas-de-paula
View
331
Download
51
Tags:
Embed Size (px)
DESCRIPTION
Guia para a técnologia IMS
Citation preview
Huawei Technologies Co.,
Ltd.
Research Document Center
Document
Number Version Confidentiality
3.1 Open for customer
Product: IMS 72 Pages
GVT IMS Project
Provisioning Guide
(For Retail Customers)
Huawei Technologies Co., Ltd.
All rights reserved
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 2 -
Version Control Table
Reviewed by Ver Date Notes
Janir Pinheiro – SPO TSD 1.0 31-Aug-11 - First version for customer revision
Janir Pinheiro – SPO TSD 1.1 21-set-11 - Item 1.30 Voice Mail Service: Added service description and example was changed.
- Added Item 1.58: Support FAX service.
Janir Pinheiro – SPO TSD 1.2 27-set-11 - Items from 1.1 to 1.10: scripts were changed to support SIP Digest authentication
Janir Pinheiro – SPO TSD 1.3 01-nov-11 - Item 1.33 changed to “Outgoing Call Barring (Cadeado Eletrônico)”.
Yan Guang Hui – Shenzhen
R&D
Janir Pinheiro – SPO TSD
1.4.1 30-nov-11 - Added description for HSS, ENS and ATS part for creation of SIP and H248 users.
Janir Pinheiro – SPO TSD 1.4.2 11-jan-12 - Scripts for SIP and H248 part were optimized;
- Provisioning part about PABX R2 and PRA part (corporate customers) was separated in
a new document, now this document only covers the provisioning for Retail subscribers.
Janir Pinheiro – SPO TSD 1.4.3 12-Jan-12 - Error found on chapter 1.1 and 1.2 about ADD SBR script , the correct notation is SIP
URI, not TEL URI.
Janir Pinheiro – SPO TSD 1.4.4 18-Jan-12 - Chapter 1.9 - MOD SBR script changed to support MWI feature;
- Chapter 1.12 - Added CBA commands when subscriber has default K value;
- Added Chapter 1.36 – Set Temporary Suspension of Subscriber;
- Added Chapter 1.37 – Remove Temporary Suspension of Subscriber;
- Added Chapter 1.38 – List Temporary Suspension of Subscriber.
- Added Chapter 1.39 – MSAN Users – Change the Access Part and keep the Subscriber
Number
- Added Chapter 1.40 – MSAN Users – Change the Subscriber Number and keep Access
Part
Janir Pinheiro – SPO TSD 1.5 05-Mar-12 - Added Chapter 1.41 – Calling Line Identification Restriction (CLIR);
- Added Chapter 1.42 – Calling Line Identification Restriction Override (RIO);
- Added Chapter 1.43 – List CLIR;
- Added Chapter 1.44 – List RIO;
Janir Pinheiro – SPO TSD 1.6 09-Apr-12 - Changed command: USE ME now uses customized NE name to support dual homing
service;
- Added command: ADD HNNRLI must be added also for TEL URI format to support
Emergency call service;
Janir Pinheiro – SPO TSD 2.0 26-Jun-12 - Chapter 1.2 - Added parameter EMGCN for the command ADD ASBR;
Parameter NETID was changed to support geo-redundancy service.
- Chapter 2 has changed, added new solution based on ENUM index for NCOS.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 3 -
Janir Pinheiro – SPO TSD 2.1 23-Jul-12 - Changed USE ME command according to the geo-redundancy standard
- Fixed MN range for ADD ASBR command on M2000, chapter 1.2
- Updated SIFCID values for ADD HSIFC command on HSS
- Added parameter EMGCN description on chapter 1.2
- Chapter 2.3.14: MOD SBR command for NCOS 25 has changed (added ENUM index).
Janir Pinheiro – SPO TSD 2.2 13-Sep-12 - Chapter 2.3.21: Changes in NCOS 71 configuration
- Chapter 2.3.22: Changes in NCOS 72 configuration
TanGuangsheng – Shenzhen
R&D
2.3 27-Oct-12 - Add Call-out authority CCOS1 ~ CCOS16 to subscribers.
- MN parameter is optional in the command ADD ASBR.
- MENAME change to ATS in the PBX related commands.
- Add some commands for the NCOS 25.
- Add Chapter 2.4 General Blocking for Retail Subscribers.
Janir Pinheiro – SPO TSD 2.4 28-Jan-13 - Updated SIFCID values for ADD HSIFC command on HSS
- Updated parameter PRI for the command ADD ASBR on M2000 to be in accordance
with SIP digest authentication scheme.
TianZhiGang – Shenzhen
R&D
2.5 14-Mar-13 - Renew chapter “1.14 SIP PBX subscribers”
TianZhiGang – Shenzhen
R&D
2.6 27-Mar-13 - Renew the document associate with PBX service provisioning chapters.
Wangqiujing – China GSRC 2.7 20-May-13 - Update the chapter 1.2, add an IMPORTANT note and three commands at page 26.
Wangqiujing – China GSRC 2.8 24-May-13 - Update the chapter 1.2, add a description to commands ADD ANI at page 26.
Wangqiujing – China GSRC 2.9 11-Jun-13 - Add Chapter 1.45 Apply Number Change Announcement for changed number
Janir Pinheiro – SPO NIS 3.0 31-Jul-13 - Update the chapter 1.12: modify terminal command for activation when subscriber has
default K value to #66#.
- Update the chapter 1.1 and 1.2: add information for referring to “Table 1” when
configuring CSC (call source) parameter for ADD SBR command in ATS.
- “ADD SBR” adds a parameter FLBGRP to differentiate user type.
Janir Pinheiro – SPO NIS 3.1 23-Aug-13 - Added chapters 1.14.1 and 1.14.2: Procedure to configure PBX hunting group when
associated subscriber has valid number (DNH) and virtual number (DLH).
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 4 -
Table of Contents
1 SUBSCRIBER CREATION AND SERVICE CONFIGURATION .................................................................................... 7
1.1 Create New SIP subscriber .................................................................................................................................................... 7
1.2 Create New H.248 subscriber .............................................................................................................................................. 14
1.3 Remove SIP Subscriber ....................................................................................................................................................... 26
1.4 Remove H.248 Subscriber ................................................................................................................................................... 27
1.5 List SIP subscriber database parameters ............................................................................................................................. 28
1.6 List H.248 subscriber database parameters ......................................................................................................................... 29
1.7 Give Conference Service Right to Subscriber ....................................................................................................................... 30
1.8 Call Waiting ........................................................................................................................................................................ 30
1.9 Voice Mail System ............................................................................................................................................................... 31
1.10 Call Forward Unconditional (CFU) ..................................................................................................................................... 33
1.11 Change Subscriber Call Source .......................................................................................................................................... 34
1.12 Outgoing Call Barring (Cadeado Eletrônico) ...................................................................................................................... 35 1.12.1 Command Description ....................................................................................................................................................... 35 1.12.2 Terminal commands ........................................................................................................................................................... 37
1.13 Calling Line Identification Presentation (CLIP) ................................................................................................................... 37
1.14 SIP PBX subscribers ........................................................................................................................................................... 38 1.14.1 PBXSBR with valid subscriber number (DNH) .................................................................................................................... 38 1.14.2 PBXSBR with virtual subscriber number (DLH) .................................................................................................................. 41
1.15 H.248 PBX subscribers ...................................................................................................................................................... 43
1.16 Change Subscriber Restriction Group from 1029 to none 65535 ....................................................................................... 44
1.17 Remove Conference Authority from Subscriber ................................................................................................................ 44
1.18 Remove Call Waiting Authority from Subscriber ............................................................................................................... 45
1.19 Remove CFU from subscriber ............................................................................................................................................ 45
1.20 Change Subscriber Call Source .......................................................................................................................................... 46
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 5 -
1.21 Remove Outgoing Call Barring (Cadeado Eletrônico) from subscriber ............................................................................... 46
1.22 Remove CLIP authority from subscriber ............................................................................................................................ 47
1.23 Remove SIP subscriber from a PBX group ......................................................................................................................... 47
1.24 Remove H.248 Subscriber from a PBX group ..................................................................................................................... 48
1.25 Reset Subscriber Password to default value (Cadeado Eletrônico) .................................................................................... 48
1.26 List Call Waiting ................................................................................................................................................................ 49
1.27 List Conference ................................................................................................................................................................. 50
1.28 List Voice Mail Service ...................................................................................................................................................... 50
1.29 List CFU (Call Forwarding Unconditional) .......................................................................................................................... 51
1.30 List Call Source .................................................................................................................................................................. 52
1.31 List CLIP ............................................................................................................................................................................ 53
1.32 List PBX subscribers .......................................................................................................................................................... 53
1.33 List Outgoing Call Barring (Cadeado Eletrônico) ................................................................................................................ 54
1.34 Register CFU from IMS no subscriber intervention ............................................................................................................ 54
1.35 Support Fax Service .......................................................................................................................................................... 55
1.36 Set Temporary Suspension of subscriber ........................................................................................................................... 56
1.37 Remove Temporary Suspension of subscriber ................................................................................................................... 56
1.38 List Temporary Suspension of subscriber .......................................................................................................................... 57
1.39 MSAN Users – Change the Access Part and keep the Subscriber Number .......................................................................... 57
1.40 MSAN Users – Change the Subscriber Number and keep Access Part ................................................................................ 58
1.41 Calling Line Identification Restriction (CLIR) ...................................................................................................................... 58
1.42 Calling Line Identification Restriction Override (RIO) ........................................................................................................ 59
1.43 List CLIR ............................................................................................................................................................................ 59
1.44 List RIO ............................................................................................................................................................................. 60
1.45 Apply Number Change Announcement for changed number ............................................................................................ 60 1.45.1 Modify a current record for number change announcement: ........................................................................................... 60 1.45.2 Add a new record to apply a number change announcement: ......................................................................................... 61
2 CONFIGURATION ACCORDING TO THE CLASS OF SERVICE (NCOS) ................................................................. 62
2.1 General Rules: .................................................................................................................................................................... 62
2.2 List of NCOS ........................................................................................................................................................................ 63
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 6 -
2.3 Commands for provisioning ................................................................................................................................................ 64 2.3.1 NCOS 1 ................................................................................................................................................................................. 64 2.3.2 NCOS 2 ................................................................................................................................................................................. 64 2.3.3 NCOS 3 ................................................................................................................................................................................. 65 2.3.4 NCOS 4 ................................................................................................................................................................................. 65 2.3.5 NCOS 15 ............................................................................................................................................................................... 65 2.3.6 NCOS 16 ............................................................................................................................................................................... 65 2.3.7 NCOS 17 ............................................................................................................................................................................... 66 2.3.8 NCOS 19 ............................................................................................................................................................................... 66 2.3.9 NCOS 20 ............................................................................................................................................................................... 66 2.3.10 NCOS 21 ............................................................................................................................................................................. 66 2.3.11 NCOS 22 ............................................................................................................................................................................. 66 2.3.12 NCOS 23 ............................................................................................................................................................................. 67 2.3.13 NCOS 24 ............................................................................................................................................................................. 67 2.3.14 NCOS 25 ............................................................................................................................................................................. 67 2.3.15 NCOS 30 ............................................................................................................................................................................. 67 2.3.16 NCOS 31 ............................................................................................................................................................................. 68 2.3.17 NCOS 32 ............................................................................................................................................................................. 68 2.3.18 NCOS 33 ............................................................................................................................................................................. 68 2.3.19 NCOS 34 ............................................................................................................................................................................. 68 2.3.20 NCOS 41 ............................................................................................................................................................................. 69 2.3.21 NCOS 71 ............................................................................................................................................................................. 69 2.3.22 NCOS 72 ............................................................................................................................................................................. 69
2.4 General Blocking for Retail Subscribers ............................................................................................................................... 69 2.4.1 xxxBIO .................................................................................................................................................................................. 69
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 7 -
1 Subscriber Creation and Service Configuration
1.1 Create New SIP subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=HSS;
ADD HSDAINF: IMPI="+556239901189", HUSERNAME="+556239901189", PWD="1189", REALM="ims1.gvt.net.br";
ADD HSUB: SUBID="+556239901189", IMPI="+556239901189", IMPU="sip:[email protected]", PBXUSERFLAG=FALSE;
ADD HIMPU: IMPI="+556239901189", IMPU="tel:+556239901189";
SET HVNTPLID: IMPU="sip:[email protected]", VNTPLID=1;
SET HVNTPLID: IMPU="tel:+556239901189", VNTPLID=1;
SET HREGAUTH: IMPU="tel:+556239901189", REGAUTH=TRUE;
SET HREGAUTH: IMPU="sip:[email protected]", REGAUTH=TRUE;
SET HIRS: IRSID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"";
SET HDEFIMPU: IRSID=1,IMPU="sip:[email protected]";
SET HSPSHARE: BASEIMPU="sip:[email protected]", IMPU="tel:+556239901189";
SET HALIASPU: ALIASID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"";
ADD HSIFC:IMPU="sip:[email protected]", SIFCID=621;
ADD HNNRLI:IMPU="sip:[email protected]",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a;
ADD HNNRLI:IMPU="tel:+556239901189 ",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a;
USE ME:MENAME=ENS;
ADD DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa", ORDER=10, PREFERENCE=101, FLAGS="U",
SERVICE="E2U+sip", REGEXP="!^(.*)$!sip:+\\[email protected]\;user=phone!";
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 8 -
USE ME:MENAME=ATS;
ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE,VCCFLAG=NO,VTFLAG=NO,
NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CCO2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,
CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967
295,OUTRST=NO,INRST=NO,NOAT=20,RINGCOUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITIN
G,SCF=NO,LMTGRP=65534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
ADD SBR:IMPU="sip:[email protected]", LP=62, CSC=1001, FLBGRP=3, TEMPLATEIDX=1;
Command Description
• USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
• ADD HSDAINF: IMPI="+556239901189", HUSERNAME="+556239901189", PWD="1189",
REALM="ims1.gvt.net.br";
Description: Add SIP Digest authentication configuration for this user.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits)
HUSERNAME (V): The user name, used to register the subscriber on HSS. In this field, must fill the number in the
format + 55 AC number (8 digits). As a default, HUSERNAME value is the same with value of IMPI.
PWD (V): The user password, used to register the subscriber on HSS. This field can be filled by any character
excepting the symbols & “ ‘ and it has a maximum length of 32 digits.
IMPORTANT = this password is only used for registration of subscriber, it has no relation with password for
supplementary services. For SS, refer to Chapter 1.25 - Reset Subscriber Password to default value (Cadeado
Eletrônico).
REALM: (V): This field refers to the IMS domain the subscriber refers to. It can assume the follow parameters:
SPO ims1.gvt.net.br
RJO ims1.gvt.net.br
CTA ims2.gvt.net.br
MGA ims2.gvt.net.br
BHE ims3.gvt.net.br
RCE ims3.gvt.net.br
• ADD HSUB: SUBID="+556239901189", IMPI="+556239901189", IMPU="sip:[email protected]",
PBXUSERFLAG=FALSE;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 9 -
Description: Add an IMS subscription, specify an ID for the IMS subscription, and it is optional to add an IMPI and
the associated IMPU for the IMS subscription in the HSS service database.
SUBID (V): This is a unique identified on the HSS. In this field, must fill the number in the format +55 AC number (8
digits). As a default, SUBID value is the same with value of IMPI.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits), the parameter must be defined by running ADD HSDAINF first.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
PBXUSERFLAG (V): This is the PBX user flag. This parameter is optional. The default value is FALSE, if the subscriber
has the PBX service (chapter 1.35), this value must be change to TRUE.
Value range: TRUE (PBXUSER), FALSE (NOTPBXUSER)
• ADD HIMPU: IMPI="+556239901189", IMPU="tel:+556239901189";
Description: Add an IMPU for an existing IMPI to the HSS service database.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits), the parameter must be defined by running ADD HSDAINF.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SET HVNTPLID: IMPU="sip:[email protected]", VNTPLID=1;
• SET HVNTPLID: IMPU="tel:+556239901189", VNTPLID=1;
Description: It sets the visited network template ID for the specified IMPU in the HSS service database. If the IMPU
belongs to an IRS, the other IMPUs in the IRS are automatically registered with the same visited network template
ID.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
VNTPLID (F): This is an index value; this parameter must be set by using the ADD HVNTPL command before it is
referred to here. GVT default value is “1”, there is only one value for one IMS site.
• SET HREGAUTH: IMPU="tel:+556239901189", REGAUTH=TRUE;
• SET HREGAUTH: IMPU="sip:[email protected]", REGAUTH=TRUE;
Description: It sets the registration authority for the specified IMPU in the HSS service database.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 10 -
REGAUTH (V): The value TRUE means that the registration is allowed; the value FALSE means that the registration is
not allowed. The GVT default value is TRUE.
Value range: FALSE (False), TRUE(True)
• SET HIRS: IRSID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"";
Description : It set the implicit registration set (IRS) attribute for multiple IMPUs in the HSS service database. In the
IRS, if a number registration is successful, then all the other numbers automatically registered.
IRSID (F): This parameter is unique on the HSS and must be filled as “1” in all the records. The value 0 means
deleting the specified IMPU from the IRS.
IMPULIST (V): The IMPU list can contain up to 10 IMPUs separated by &, The IMPU must be set by running the
operation ADD HSUB, or ADD HIMPU before it is referred to here. The IMPU value must be in SIP URI or TEL URI
format.
Example:
IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\""; Means two different names
for the same subscriber
IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"&\"sip:[email protected]\"
"; Means three different names for the same subscriber.
• SET HDEFIMPU: IRSID=1,IMPU="sip:[email protected]";
Description: It sets the default IMPU for the specified implicit registration set (IRS) in the HSS service database. The
default IMPU provides a default value for service processing at the network side. It is used when required for
service processing.
IRSID (F): This parameter is unique on the HSS and must be filled as “1” in all the records.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
• SET HSPSHARE: BASEIMPU="sip:[email protected]", IMPU="tel:+556239901189";
Description: It shares a service profile between an IMPU and the specified base IMPU in the HSS service database.
For example, If A and B share the service profile, then A and B are the same for CSCF.
BASEIMPU (V): The base IMPU whose associated service profile is to be shared. The IMPU value must be in SIP URI
or TEL URI format
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
• SET HALIASPU: ALIASID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"";
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 11 -
Description: This operation to set an alias group ID for multiple IMPUs in the HSS service database. The alias group
refers to a collection of the IMPUs that share the service profile in an implicit registration set (IRS). You can fulfill one
of the following tasks using the command. For example, in the alias group contains A and B, then A and B are the
same for AS.
ALIASID (F): This parameter is unique on the HSS and must be filled as “1” in all the records.
IMPULIST (V): An IMPU list can contain up to 10 IMPUs separated by &, The IMPUs contained in an IMPU list must
be set before they are referred to here. They are obtainable by running the LST HSUB operation. The IMPU value
must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
• ADD HSIFC:IMPU="sip:[email protected]", SIFCID=621;
Description (V): Add a shared initial filter criteria (iFC) set for the specified IMPU. Each IMPU can be configured with
a maximum of eight shared iFC sets.
IMPU(V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel: +55 AC number(8 digits).
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SIFCID (V): This is an index value. GVT standard is XX+P, where XX is according to the IMS Site: 41+P (CTA), 44+P
(MGA), 11+P (SPO), 21+P (RJO), 31+P (BHE) and 81+P (RCE).
P can assume the follow values:
1 - For intra-office traffic, used for Retail and Corporate, ex: 621
7- For traffic terminated on UGC, used only for Corporate, ex: 627
8 - For traffic terminated on BCF, used only for Vox IP service, ex 628
For more details about this parameter, please refer to the HLD documentation, table 7-2 – Share IFC Template list
• ADD HNNRLI:IMPU="sip:[email protected]",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a;
Description: It is used to add a reference location data record for the specified IMPU to the HSS service database.
PS: FOR EMERGENCY CALL SERVICES, IT’S MANDATORY TO ADD THIS COMMAND FOR BOTH FORMATS, SIP URI
AND TEL URI.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
RLINDEX (V): this is an index for this command. A subscriber can have up to 5 different location records, but for GVT
project, the value is “1” for all subscribers.
RLI (V): The field RLI (Reference Location Information) is used to mark the city where the subscriber belongs to, and
on E-CSCF to determine the emergency number (or numbers) that attends this city. The rule adopted for this field is
the Anatel notation for the city name, and using a fixed length of 4 digits, filling the last one with "_" if it doesn't
used.
Examples:
Curitiba: CTA_
São Paulo: SPO_
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 12 -
Alto Rolante: ALRO
Aceguá: ACEG
RLT (F): It is the type of the reference location information. GVT default value is IEEE-802.11a.
• USE ME:MENAME=ENS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server
(ENS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
• ADD DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa", ORDER=10, PREFERENCE=101,
FLAGS="U", SERVICE="E2U+sip", REGEXP="!^(.*)$!sip:+\\[email protected]\;user=phone!";
Description: Add a generic NAPTR resource record for an E.164 number.
PS: This configuration is not suitable for VoxIP services, these services are still under analysis together with GVT
engineering team, and we will provide a procedure in a new chapter later.
E164NUM (V): Specifies an E.164 number or number segment. GVT specified format is a number (8digits).
ZONENAME (V): Specifies the name of a zone to which the record belongs. This parameter must be defined by the
ADD DZONE command before it is referenced here. GVT specified format is “X.X.5.5.e164.arpa”, it is the E.164
format and must be understand like this:
2.6 - > means the area code from right to left, so in this case, AC is 62
5.5 -> means the country code from right to left, so in this case, country code is 55
For Curitiba, the ZONENAME will be 1.4.5.5.e164.arpa, for Porto Alegre will be 1.5.5.5.e164.arpa and so on.
ORDER (F): Specifies the order of a NAPTR resource record. A smaller value represents a higher level of order. GVT
specified value is 10
PREFERENCE (F): Specifies the preference of a NAPTR resource record. A smaller value represents a higher level of
preference. GVT specified value is 101.
FLAGS(F): Specifies the flag for querying NAPTR resource records on a terminal. GVT default value is U.
SERVICE(F): Specifies the protocol complied with when a regular expression is mapped to a URI address. GVT default
value is E2U+sip.
REGEXP(V): Specifies the rules for mapping an E.164 number to a URI address. GVT default value is the
“!^(.*)$!sip:+\\[email protected]\;user=phone!” format. This field refers to the IMS domain the subscriber refers
to. It can assume the follow parameters:
SPO !^(.*)$!sip:+\\[email protected]\;user=phone!
RJO !^(.*)$!sip:+\\[email protected]\;user=phone!
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 13 -
CTA !^(.*)$!sip:+\\[email protected]\;user=phone!
MGA !^(.*)$!sip:+\\[email protected]\;user=phone!
BHE !^(.*)$!sip:+\\[email protected]\;user=phone!
RCE !^(.*)$!sip:+\\[email protected]\;user=phone!
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
• ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE,
VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC
O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=
1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING
COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6
5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
• ADD TP:TEMPLATEIDX=2,TEMPLATENAME="R2_PRA_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=PSTN,
VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC
O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=
1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING
COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6
5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
Description: This command is used to add a Subscriber Data Template to the configuration database. Each
Subscriber Data Template is identified by a unique template index. You can use the same template to define
subscribers with some common attributes.
TEMPLATEIDX (V): It defines the index of the Subscriber Data Template. In GVT project, we will use two different
data templates:
Index 1: for SIP / h248 subscribers
Index 2: for R2 / PRA subscribers
PS: For some parameters (For example: LP and CS), because it will be changed for each subscriber in the
command ADD SBR, it will not be needed to be included in the template, so you can define the template with
standard values.
NSCLIP (F): It specifies the Calling Line Identification Presentation (CLIP) service right of a subscriber. This parameter
is one of the elements Supplement Service Right. It is the default service GVT. The value is 1.
NSSCCA (F): It specifies the Collect Call(SCCA) service right of a subscriber. This parameter is one of the elements
Supplement Service Right. It is the default service GVT. The value is 1.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 14 -
Call-out authority (V): It specifies the call-out authority. By default, the system configures the following call-out
authorities for the subscriber data template: intra office, local, local toll, national toll, intra-Centrex, outgoing
Centrex, customized Operator and customized supply service.
Call-in authority (V): It specifies the call-in authority. By default, the system configures the following call-in
authorities for the subscriber data template: International call-in authority, National Toll call-in authority and Local
Toll call-in authority.
CODEC (V): It specifies the Supported Codec. By default, GVT system need support G711_64K_A_LAW,
G711_64K_U_LAW, G722, G723, G729, and AMR. The value “1” means that the codec is set, “0” means that it is not
set.
VMAIND (F): This is the Voice mailbox address index; it specifies the index of a voice mailbox address for a specified
subscriber. It must be defined by running ADD VOICEMAIL in the MML Command - ATS9900 window before being
referenced here.GVT value is 1.
• ADD SBR:IMPU="sip:[email protected]", LP=62, CSC=1001, FLBGRP=3, TEMPLATEIDX=1;
Description: It is used to add an ATS subscriber and set the related service rights and basic attributes of the
subscriber in the configuration database.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
LP (V): It specifies the local DN set of a subscriber. The value 65534 is a wildcard. When the IMPU is in local TEL URI
format, such as tel: 39901176, this parameter and IMPU together identify a subscriber. In this case, the parameter
must be defined by running ADD LDNSET in the MML Command - ATS9900 window before being referenced here.
FLBGRP (V): It is used to indicate the user access type. For SIP user, the value is 3.
CSC (V): It specifies the call source of a subscriber. The parameter must be defined by running ADD CALLSRC in the
MML Command - ATS9900 window before being referenced here.
Please refer to the “Table 1” for all call source codes currently used on IMS Network before adding this command.
TEMPLATEIDX (V): It specifies the index of the Subscriber Data Template. The parameter must be defined by running
ADD TP before being referenced here.
1.2 Create New H.248 subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=HSS;
ADD HSDAINF: IMPI="+556239901189", HUSERNAME="+556239901189", PWD="1189", REALM="ims1.gvt.net.br";
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 15 -
ADD HSUB: SUBID="+556239901189", IMPI="+556239901189", IMPU="sip:[email protected]", PBXUSERFLAG=FALSE;
ADD HIMPU: IMPI="+556239901189", IMPU="tel:+556239901189";
SET HVNTPLID: IMPU="sip:[email protected]", VNTPLID=1;
SET HVNTPLID: IMPU="tel:+556239901189", VNTPLID=1;
SET HREGAUTH: IMPU="tel:+556239901189", REGAUTH=TRUE;
SET HREGAUTH: IMPU="sip:[email protected]", REGAUTH=TRUE;
SET HIRS: IRSID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"";
SET HDEFIMPU: IRSID=1,IMPU="sip:[email protected]";
SET HSPSHARE: BASEIMPU="sip:[email protected]", IMPU="tel:+556239901189";
SET HALIASPU: ALIASID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"";
ADD HSIFC:IMPU="sip:[email protected]", SIFCID=621;
ADD HNNRLI:IMPU="sip:[email protected]",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a;
ADD HNNRLI:IMPU="tel:+556239901189",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a;
USE ME:MENAME=ENS;
ADD DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa", ORDER=10, PREFERENCE=101, FLAGS="U",
SERVICE="E2U+sip", REGEXP="!^(.*)$!sip:+\\[email protected]\;user=phone!";
USE ME:MENAME=ATS;
ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE,VCCFLAG=NO,VTFLAG=NO,
NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CCO2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,
CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967
295,OUTRST=NO,INRST=NO,NOAT=20,RINGCOUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITIN
G,SCF=NO,LMTGRP=65534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
ADD SBR:IMPU="sip:[email protected]", LP=62, CSC=1001, FLBGRP=6, TEMPLATEIDX=1;
USE ME:MENAME=M2000;
ADD ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]", PRI="+556239901189", REGTP=SINGLE, DID=ESL,
MN=22, EID="10.140.72.130:2944", TID="0", HNID="HNID01", NETID="VNID01", NETINFO="GNA_", PHNCON="AC62", DIGMAP=0,
PWD="1189", EMGCN=”EMG01”, DP=YES, DR=YES, CONF=0;
Note: The parameter MN (Module Number) is an optional parameter, if it is omitted, the AGCF will
automatically distribute the new subscriber based on its internal logic. i.e. The system invoking this interface
doesn’t need to input this parameter during creating new subscribers, unless it has some special reason to
manually assign the new subscriber to a specific module.
If the number of MGW exceeds the capability of the module, the system will return the 268034, and the
description is “The table exceeds the capability of the module”.
Command Description
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 16 -
• USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
• ADD HSDAINF: IMPI="+556239901189", HUSERNAME="+556239901189", PWD="1189",
REALM="ims1.gvt.net.br";
Description: Add SIP Digest authentication configuration for this user.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits)
HUSERNAME (V): The user name, used to register the subscriber on HSS. In this field, must fill the number in the
format + 55 AC number (8 digits). As a default, HUSERNAME value is the same with value of IMPI.
PWD (V): The user password, used to register the subscriber on HSS. This field can be filled by any character
excepting the symbols & “ ‘ and it has a maximum length of 32 digits.
IMPORTANT = this password is only used for registration of subscriber, it has no relation with password for
supplementary services. For SS, refer to Chapter 1.25 - Reset Subscriber Password to default value (Cadeado
Eletrônico).
EMGCN (V): Emergence Call Group Name. It specifies the name of the emergence call group that the subscriber to
be added belongs to. When this parameter is specified for a subscriber, the subscriber will be able to call the
emergency numbers defined for the specified group. GVT default value is EMG01.
REALM: (V): This field refers to the IMS domain the subscriber refers to. It can assume the follow parameters:
SPO ims1.gvt.net.br
RJO ims1.gvt.net.br
CTA ims2.gvt.net.br
MGA ims2.gvt.net.br
BHE ims3.gvt.net.br
RCE ims3.gvt.net.br
• ADD HSUB: SUBID="+556239901189", IMPI="+556239901189", IMPU="sip:[email protected]",
PBXUSERFLAG=FALSE;
Description: Add an IMS subscription, specify an ID for the IMS subscription, and it is optional to add an IMPI and
the associated IMPU for the IMS subscription in the HSS service database.
SUBID (V): This is a unique identified on the HSS. In this field, must fill the number in the format +55 AC number (8
digits). As a default, SUBID value is the same with value of IMPI.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits), the parameter must be defined by running ADD HSDAINF first.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 17 -
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
PBXUSERFLAG (V): This is the PBX user flag. This parameter is optional. The default value is FALSE, if the subscriber
has the PBX service (chapter 1.35), this value must be change to TRUE.
Value range: TRUE (PBXUSER), FALSE (NOTPBXUSER)
• ADD HIMPU: IMPI="+556239901189", IMPU="tel:+556239901189";
Description: Add an IMPU for an existing IMPI to the HSS service database.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits), the parameter must be defined by running ADD HSDAINF.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
• SET HVNTPLID: IMPU="sip:[email protected]", VNTPLID=1;
• SET HVNTPLID: IMPU="tel:+556239901189", VNTPLID=1;
Description: It sets the visited network template ID for the specified IMPU in the HSS service database. If the IMPU
belongs to an IRS, the other IMPUs in the IRS are automatically registered with the same visited network template
ID.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel: +55 AC number (8 digits).
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
VNTPLID (F): This is an index value; this parameter must be set by using the ADD HVNTPL command before it is
referred to here. GVT default value is “1”, there is only one value for one IMS site.
• SET HREGAUTH: IMPU="tel:+556239901189", REGAUTH=TRUE;
• SET HREGAUTH: IMPU="sip:[email protected]", REGAUTH=TRUE;
Description: It sets the registration authority for the specified IMPU in the HSS service database.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
REGAUTH (V): The value TRUE means that the registration is allowed; the value FALSE means that the registration is
not allowed. The GVT default value is TRUE.
Value range: FALSE (False), TRUE(True)
• SET HIRS: IRSID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"";
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 18 -
Description : It set the implicit registration set (IRS) attribute for multiple IMPUs in the HSS service database. In the
IRS, if a number registration is successful, then all the other numbers automatically registered.
IRSID (F): This parameter is unique on the HSS and must be filled as “1” in all the records. The value 0 means
deleting the specified IMPU from the IRS.
IMPULIST (V): The IMPU list can contain up to 10 IMPUs separated by &, The IMPU must be set by running the
operation ADD HSUB, or ADD HIMPU before it is referred to here. The IMPU value must be in SIP URI or TEL URI
format.
Example:
IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\""; Means two different names
for the same subscriber
IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"&\"sip:[email protected]\"
"; Means three different names for the same subscriber.
• SET HDEFIMPU: IRSID=1,IMPU="sip:[email protected]";
Description: It sets the default IMPU for the specified implicit registration set (IRS) in the HSS service database. The
default IMPU provides a default value for service processing at the network side. It is used when required for
service processing.
IRSID (F): This parameter is unique on the HSS and must be filled as “1” in all the records.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
• SET HSPSHARE: BASEIMPU="sip:[email protected]", IMPU="tel:+556239901189";
Description: It shares a service profile between an IMPU and the specified base IMPU in the HSS service database.
For example, If A and B share the service profile, then A and B are the same for CSCF.
BASEIMPU (V): The base IMPU whose associated service profile is to be shared. The IMPU value must be in SIP URI
or TEL URI format
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
• SET HALIASPU: ALIASID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"";
Description: This operation to set an alias group ID for multiple IMPUs in the HSS service database. The alias group
refers to a collection of the IMPUs that share the service profile in an implicit registration set (IRS). You can fulfill one
of the following tasks using the command. For example, in the alias group contains A and B, then A and B are the
same for AS.
ALIASID (F): This parameter is unique on the HSS and must be filled as “1” in all the records.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 19 -
IMPULIST (V): An IMPU list can contain up to 10 IMPUs separated by &, The IMPUs contained in an IMPU list must
be set before they are referred to here. They are obtainable by running the LST HSUB operation. The IMPU value
must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
• ADD HSIFC:IMPU="sip:[email protected]", SIFCID=621;
Description (V): Add a shared initial filter criteria (iFC) set for the specified IMPU. Each IMPU can be configured with
a maximum of eight shared iFC sets.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SIFCID (V): This is an index value. GVT standard is XX+P, where XX is according to the IMS Site: 41+P (CTA), 44+P
(MGA), 11+P (SPO), 21+P (RJO), 31+P (BHE) and 81+P (RCE).
P can assume the follow values:
1 - For intra-office traffic, used for Retail and Corporate, ex: 621
7- For traffic terminated on UGC, used only for Corporate, ex: 627
8 - For traffic terminated on BCF, used only for Vox IP service, ex 628
For more details about this parameter, please refer to the HLD documentation, table 7-2 – Share IFC Template list
• ADD HNNRLI:IMPU="sip:[email protected]",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a;
Description: It is used to add a reference location data record for the specified IMPU to the HSS service database.
PS: FOR EMERGENCY CALL SERVICES, IT’S MANDATORY TO ADD THIS COMMAND FOR BOTH FORMATS, SIP URI
AND TEL URI.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
RLINDEX (V): this is an index for this command. A subscriber can have up to 5 different location records, but for GVT
project, the value is “1” for all subscribers.
RLI (V): The field RLI (Reference Location Information) is used to mark the city where the subscriber belongs to, and
on E-CSCF to determine the emergency number (or numbers) that attends this city. The rule adopted for this field is
the Anatel notation for the city name, and using a fixed length of 4 digits, filling the last one with "_" if it doesn't
used.
Examples:
Curitiba: CTA_
São Paulo: SPO_
Alto Rolante: ALRO
Aceguá: ACEG
RLT (F): It is the type of the reference location information. GVT default value is IEEE-802.11a.
• USE ME:MENAME=ENS;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 20 -
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server
(ENS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
• ADD DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa", ORDER=10, PREFERENCE=101,
FLAGS="U", SERVICE="E2U+sip", REGEXP="!^(.*)$!sip:+\\[email protected]\;user=phone!";
Description: Add a generic NAPTR resource record for an E.164 number.
PS: This configuration is not suitable for VoxIP services, these services are still under analysis together with GVT
engineering team, and we will provide a procedure in a new chapter later.
E164NUM (V): Specifies an E.164 number or number segment. GVT specified format is a number (8digits).
ZONENAME (V): Specifies the name of a zone to which the record belongs. This parameter must be defined by the
ADD DZONE command before it is referenced here. GVT specified format is “X.X.5.5.e164.arpa”, it is the E.164
format and must be understand like this:
2.6 - > means the area code from right to left, so in this case, AC is 62
5.5 -> means the country code from right to left, so in this case, country code is 55
For Curitiba, the ZONENAME will be 1.4.5.5.e164.arpa, for Porto Alegre will be 1.5.5.5.e164.arpa and so on.
ORDER (F): Specifies the order of a NAPTR resource record. A smaller value represents a higher level of order. GVT
specified value is 10
PREFERENCE (F): Specifies the preference of a NAPTR resource record. A smaller value represents a higher level of
preference. GVT specified value is 101.
FLAGS(F): Specifies the flag for querying NAPTR resource records on a terminal. GVT default value is U.
SERVICE(F): Specifies the protocol complied with when a regular expression is mapped to a URI address. GVT default
value is E2U+sip.
REGEXP(V): Specifies the rules for mapping an E.164 number to a URI address. GVT default value is the
“!^(.*)$!sip:+\\[email protected]\;user=phone!” format. This field refers to the IMS domain the subscriber refers
to. It can assume the follow parameters:
SPO !^(.*)$!sip:+\\[email protected]\;user=phone!
RJO !^(.*)$!sip:+\\[email protected]\;user=phone!
CTA !^(.*)$!sip:+\\[email protected]\;user=phone!
MGA !^(.*)$!sip:+\\[email protected]\;user=phone!
BHE !^(.*)$!sip:+\\[email protected]\;user=phone!
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 21 -
RCE !^(.*)$!sip:+\\[email protected]\;user=phone!
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
• ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE,
VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC
O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=
1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING
COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6
5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
• ADD TP:TEMPLATEIDX=2,TEMPLATENAME="R2_PRA_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=PSTN,
VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC
O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=
1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING
COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6
5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
Description: This command is used to add a Subscriber Data Template to the configuration database. Each
Subscriber Data Template is identified by a unique template index. You can use the same template to define
subscribers with some common attributes.
TEMPLATEIDX (V): It defines the index of the Subscriber Data Template. In GVT project, we will use two different
data templates:
Index 1: for SIP / h248 subscribers
Index 2: for R2 / PRA subscribers
PS: For some parameters (For example: LP and CS), because it will be changed for each subscriber in the
command ADD SBR, it will not be needed to be included in the template, so you can define the template with
standard values.
NSCLIP (F): It specifies the Calling Line Identification Presentation (CLIP) service right of a subscriber. This parameter
is one of the elements Supplement Service Right. It is the default service GVT. The value is 1.
NSSCCA (F): It specifies the Collect Call(SCCA) service right of a subscriber. This parameter is one of the elements
Supplement Service Right. It is the default service GVT. The value is 1.
Call-out authority (V): It specifies the call-out authority. By default, the system configures the following call-out
authorities for the subscriber data template: intra office, local, local toll, national toll, intra-Centrex, outgoing
Centrex, customized Operator and customized supply service.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 22 -
Call-in authority (V): It specifies the call-in authority. By default, the system configures the following call-in
authorities for the subscriber data template: International call-in authority, National Toll call-in authority and Local
Toll call-in authority.
CODEC (V): It specifies the Supported Codec. By default, GVT system need support G711_64K_A_LAW,
G711_64K_U_LAW, G722, G723, G729, and AMR. The value “1” means that the codec is set, “0” means that it is not
set.
VMAIND (F): This is the Voice mailbox address index; it specifies the index of a voice mailbox address for a specified
subscriber. It must be defined by running ADD VOICEMAIL in the MML Command - ATS9900 window before being
referenced here.GVT value is 1.
• ADD SBR:IMPU="sip:[email protected]", LP=62, CSC=1001, FLBGRP=6, TEMPLATEIDX=1;
Description: It is used to add an ATS subscriber and set the related service rights and basic attributes of the
subscriber in the configuration database.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
LP (V): It specifies the local DN set of a subscriber. The value 65534 is a wildcard. When the IMPU is in local TEL URI
format, such as tel: 39901176, this parameter and IMPU together identify a subscriber. In this case, the parameter
must be defined by running ADD LDNSET in the MML Command - ATS9900 window before being referenced here.
CSC (V): It specifies the call source of a subscriber. The parameter must be defined by running ADD CALLSRC in the
MML Command - ATS9900 window before being referenced here.
Please refer to the “Table 1” for all call source codes currently used on IMS Network before adding this command.
FLBGRP (V): It is used to indicate the user access type. For H.248 user, the value is 6.
TEMPLATEIDX (V): It specifies the index of the Subscriber Data Template. The parameter must be defined by running
ADD TP before being referenced here.
• USE ME:MENAME=M2000;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the
Management Server M2000.
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
• ADD ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]", PRI="+556239901189",
REGTP=SINGLE, DID=ESL, MN=22, EID="10.140.72.130:2944", TID="0", HNID="HNID01", NETID="VNID01",
NETINFO="GNA_", PHNCON="AC62", DIGMAP=0, PWD="1189", EMGCN=”EMG01”, DP=YES, DR=YES, CONF=0;
Description: It is a configuration command, and is used to add A-CSCF subscriber data in the configuration
database. This function is used to configure functions provided by the AGCF.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 23 -
SOFTXIP (V): The IP address is the IP of AGCF site. This value is filled according to the actual situation.
PUI(V):Public User ID,The user ID used outside the IMS Core is the public user ID that is used to communicate with
others. The value of this parameter must be the same as the user ID defined on the HSS and ATS. From now on,
this will be the “facility” name of the GVT subscriber. It must have the format according to the example below
(from the GVT HLD):
Site User Type IMPU1 (TEL URI) IMPU2 (SIP URI)
SPO User tel: E.164 sip:[email protected]
RJO User tel: E.164 sip:[email protected]
CTA User tel: E.164 sip:[email protected]
MGA User tel: E.164 sip:[email protected]
BHE User tel: E.164 sip:[email protected]
RCE User tel: E.164 sip:[email protected]
PRI (V): The private user ID for IMS subscribers is a globally unique identity defined by a home network carrier. It is
used to uniquely identify a piece of subscription in the home network from a network perspective. The value of
this parameter must be the same as the user ID defined on the HSS and ATS. In GVT Network Design, we will use
the PUI notation without the sip: suffix and domain, it’s according E.164 standard.
Example: PUI="sip:[email protected]", PRI="+556239901189"
REGTP (F): Register type. It will be SINGLE register in all situations. This parameter will be fixed.
DID (F): Port type. It will be ESL in all situations. This parameter will be fixed.
MN (V): Module Number, It specifies the module number of the UACU on which the subscriber is configured. It is
valid only for ESL subscribers. The value range is 22-101. The value of the parameter must be defined in ADD BRD
before being referenced.
EID (V): Equipment ID. This is the identification of the Access Node inside the IMS. The notation is the IP address
of the AG(MSAN) + “:” + the signaling port. Example: 10.140.72.130:2944, where 10.140.72.130 is the IP of
Keymile MSAN and 2944 is the signaling port. We can compare it as the V5 ID of the V5 interface.
TID (V): Terminal ID. It specifies the physical port number of the MG to which the ESL subscriber belongs. It’s
the identification of the subscriber port for the corresponding Equipment ID. We can compare it to the L3ADDR on
V5 interface.
HNID (V): Home Network ID. This is the Index of the Home Network database. We recommend to create a index
like the table below, in case of GVT intends to set up an additional home network in the future. More information
about Home Networks, please refer to the documentation.
Site Home Network Name (for
use on ADD ASBR)
Home Network ID
SPO HNID01 ims1.gvt.net.br
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 24 -
RJO HNID01 ims1.gvt.net.br
CTA HNID02 ims2.gvt.net.br
MGA HNID02 ims2.gvt.net.br
BHE HNID03 ims3.gvt.net.br
RCE HNID03 ims3.gvt.net.br
NETID (V): Visited Network ID. This is the Index of the Visited Network database. We recommend creating an
index like the table below, in case of GVT intends to set up a different Visited Network in the future. More
information about Visited Networks, please refer to the documentation.
PS: VNID in GVT Network topology is directly associated to the number of AGCFs in the network.
Site Visited Network Name (for
use on ADD ASBR)
Visited Network ID
SPO VNID01 agcf1-spo7.ims1.gvt.net.br
RJO VNID02 agcf1-rjo6.ims1.gvt.net.br
CTA VNID01 agcf1-cta7.ims2.gvt.net.br
MGA VNID02 agcf1-mga4.ims2.gvt.net.br
BHE VNID01 agcf1-bhe4.ims3.gvt.net.br
RCE VNID02 agcf1-rce3.ims3.gvt.net.br
If a new AGCF must be installed in the future, just need to follow the sequence name, for example, for CTA:
Site Visited Network Name (for
use on ADD ASBR)
Visited Network ID
CTA VNID02 agcf2-cta7.ims2.gvt.net.br
NETINFO (V): This parameter is related to the Access Network Information (ANI), and it’s used to determine
the location-info of the subscriber. This information appears on the INVITE message and it’s used for E-CSCF to
determine the emergency number (or numbers) that attends this city. The rule adopted for this field is the Anatel
notation for the city name, and using a fixed length of 4 digits, filling the last one with "_" if it doesn't used.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 25 -
Examples:
Curitiba: CTA_
São Paulo: SPO_
Alto Rolante: ALRO
Aceguá: ACEG
PS: This information must be the same as configured on the parameter RLI when creating the Reference Location
Information for an IMPU on HSS Server (item 2 below).
PHNCON (V): Phone context. It’s used to fill the A number to match the IMPU standard. For GVT Project, we use
Phone Context Database to add the information “+55AC” in front of the original A number. Example:
Curitiba-PR will have the PHNCON = AC41. Inside Phone Context table, AC41 indexes to the information “+5541”
Goiania-GO will have the PHNCON = AC62. Inside Phone Context table, AC62 indexes to the information “+5562”
DIGMAP (V): Digitmap index.
PWD (V): It specifies the password used for authentication on HSS. This password has no relation with the
password used on supplementary services. The PWD value is the same with the PWD of “ADD HSDAINF”.
EMGCN (V): It specifies the Emergency call group. Basically, it defines some dialing rules for emergency calls (like
digitmap, other). For this project, there is no need to define a new one, we will keep this parameter as EMG01.
DP (V): Download profile from AS, keep it as default.
DR (V): Send registration subscription, keep it as default.
CONF (F): Conference URI index. It specifies the conference URI index used for applying for a conference.
Specifically, the subscriber uses the domain name of the MRF server associated with the conference URI index to
instruct the AS to apply for conference resources. This parameter is fixed as 0.
IMPORTANT: Before we add subscribers’ information for new cities, we may need these commands to add
parameters for referenced:
• ADD VNID: NAME=" VNID01", VNID=" agcf2-gna9.ims2.gvt.net.br ";
Description: It is a configuration command, and is used to add a visited network ID in the configuration database.
This function is used to configure functions provided by the AGCF.
VNID (V): It is the domain name of the AGCF.
• ADD ANI: NAME=" GNA_",ANI="GNA_";
Description: this is used to add an access network ID in the configuration database. When we added a new MGW
to the network, we need to use this command to add the MGW information on AGCF, normally; we use at least
one MGW for each city.
NAME (V): this indicates an access network name provide for a AGCF subscriber. It is referenced by the command
ADD ASBR.
ANI (V): When it is set to an MGW name, it indicates that the subscriber belongs to this MGW.
• ADD PHNCT: PCN="AC62", PC="+5562";
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 26 -
Description: It is a configuration command, and is used to add a number context in the configuration database.
This function is used to configure functions provided by the AGCF.
PC (V): The parameter value is in the format of "+country code"+"area code".
1.3 Remove SIP Subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=HSS;
RMV HSUB: SUBID="+556239901189";
RMV HSDAINF: IMPI="+556239901189";
USE ME:MENAME=ENS;
RMV DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa";
Command Description
• USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
• RMV HSUB: SUBID="+556239901189";
Description: This command is used to remove a subscription on the HSS. Perform this operation to remove the
specified IMS subscription and the IMPI and IMPU associated with the IMS subscription from the HSS service
database. Running this command, it will also remove the data from the ATS (RMV SBR)
SUBID (V): This is a unique identified on the HSS, The subscription ID is the key parameter used to determine the
subscription data to be removed. It is obtainable by running the LST HSUB operation. The value of the parameter is
case sensitive. In this field, must fill the number in the format 55 AC number (8 digits).
• RMV HSDAINF: IMPI="+556239901189";
Description: This command is used to remove the SIP Digest data record for the specified IMPI from the HSS service
database.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits)
• USE ME:MENAME=ENS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server
(ENS).
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 27 -
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
• RMV DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa";
Description: This command is used to delete NAPTR resource records.
E164NUM (V): Specifies an E.164 number or number segment.GVT specified format is a number (8digits).
ZONENAME (V): Specifies the name of a zone to which the record belongs. This parameter must be defined by the
ADD DZONE command before it is referenced here.
1.4 Remove H.248 Subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=HSS;
RMV HSUB: SUBID="+556239901189";
RMV HSDAINF: IMPI="+556239901189";
USE ME:MENAME=ENS;
RMV DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa";
USE ME:MENAME=M2000;
RMV ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected] ";
Command Description
• USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
• RMV HSUB: SUBID="+556239901189";
Description: This command is used to remove a subscription on the HSS. Perform this operation to remove the
specified IMS subscription and the IMPI and IMPU associated with the IMS subscription from the HSS service
database. Running this command, it will also remove the data from the ATS (RMV SBR)
SUBID (V): This is a unique identified on the HSS, The subscription ID is the key parameter used to determine the
subscription data to be removed. It is obtainable by running the LST HSUB operation. The value of the parameter is
case sensitive. In this field, must fill the number in the format 55 AC number (8 digits).
• RMV HSDAINF: IMPI="+556239901189";
Description: This command is used to remove the SIP Digest data record for the specified IMPI from the HSS service
database.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 28 -
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits)
• USE ME:MENAME=ENS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server
(ENS).
• RMV DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa";
Description: This command is used to delete NAPTR resource records.
E164NUM (V): Specifies an E.164 number or number segment.GVT specified format is a number (8digits).
ZONENAME (V): Specifies the name of a zone to which the record belongs. This parameter must be defined by the
ADD DZONE command before it is referenced here.
• USE ME:MENAME=M2000;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Management
Server (M2000).
• RMV ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected] ";
Description: This command is used to remove A-CSCF subscriber data in the configuration database. This function is
used to configure functions provided by the AGCF.
SOFTXIP (V): The IP address is the IP of AGCF site. This value is filled according to the actual situation.
PUI (V): This is a Public User ID; The user ID used outside the IMS Core is the public user ID that is used to
communicate with others. The value of this parameter must be the same as the user ID defined on the HSS and
ATS. From now on, this will be the “facility” name of the GVT subscriber. It must have the format according to the
example below (from the GVT HLD):
Site User Type IMPU1 (TEL URI) IMPU2 (SIP URI)
SPO User tel: E.164 sip:[email protected]
RJO User tel: E.164 sip:[email protected]
CTA User tel: E.164 sip:[email protected]
MGA User tel: E.164 sip:[email protected]
BHE User tel: E.164 sip:[email protected]
RCE User tel: E.164 sip:[email protected]
1.5 List SIP subscriber database parameters
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 29 -
LST SBR:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• LST SBR:IMPU="sip:[email protected]";
Description: This command is used to list basic subscriber data. Unless otherwise specified, parameters related with
service authority in this command use 0 to indicate that the subscriber does not have the service authority, and 1 to
indicate that the subscriber has the service authority.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
1.6 List H.248 subscriber database parameters
/****************************AT SPG web portal********************************/
USE ME:MENAME=M2000;
LST ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]";
Command Description
• USE ME:MENAME=M2000;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Management
Server M2000.
• LST ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]";
Description: It is a configuration command, and is used to query AGCF subscriber data in the configuration database.
This function is used to configure functions provided by the AGCF.
SOFTXIP (V): The IP address is the IP of AGCF BAM. This value is filled according to the actual situation.
PUI (V): This is a Public User ID; the user ID used outside the IMS Core is the public user ID that is used to
communicate with others. The value of this parameter must be the same as the user ID defined on the HSS and
ATS. From now on, this will be the “facility” name of the GVT subscriber. It must have the format according to the
example below (from the GVT HLD):
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 30 -
Site User Type IMPU1 (TEL URI) IMPU2 (SIP URI)
SPO User tel: E.164 sip:[email protected]
RJO User tel: E.164 sip:[email protected]
CTA User tel: E.164 sip:[email protected]
MGA User tel: E.164 sip:[email protected]
BHE User tel: E.164 sip:[email protected]
RCE User tel: E.164 sip:[email protected]
1.7 Give Conference Service Right to Subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SS:IMPU="sip:[email protected]", NSNPTY=1;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]", NSNPTY=1;
Description: This command is used to modify supplementary service authority data of a subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
NSNPTY (F): It specifies the Conference Call (NPTY) service right of a subscriber. You must set “0” to deactivate, “1”
to activate the feature.
1.8 Call Waiting
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 31 -
MOD SS:IMPU="sip:[email protected]",NSCW=1;
REG COMSS:IMPU="sip:[email protected]", CW=1;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]",NSCW=1;
Description: This command is used to modify supplementary service authority data of a subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
NSCW (V): It specifies the Call Waiting (CW) service right of a subscriber. You must set “0” to deactivate, “1” to
activate the feature.
• REG COMSS:IMPU="sip:[email protected]", CW=1;
Description: This command is used to register all common supplementary service for a subscriber. When a service is
registered, the service parameter value must be set to 1 (the check box of the service is selected on the SPG2800
Web Portal). The service is activated after being registered.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
CW (F): It specifies the call waiting (CW) service right of a subscriber. The CW service is automatically activated once
it is registered.
1.9 Voice Mail System
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SBR:IMPU="sip:[email protected]",NSCFBVM=1,NSMWI=1,VMAIND=1;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 32 -
MOD SS:IMPU="sip:[email protected]",NSCFBVM=1;
REG COMSS:IMPU="sip:[email protected]",CFBVM=1;
Introduction
There are four options where the call can be forwarded to the voice mail system, as below:
1 – The called number is busy: In this case, the subscriber must have the supplementary service “Call Forwarding
Busy to Voice Mailbox Right” (NSCFBVM) set to 1. To register this service (REG COMSS), the parameter CFBVM must
be set to 1;
2 – The called number does not reply the call: In this case, the subscriber must have the supplementary service “Call
Forwarding No Reply to Voice Mailbox Right” (NSCFNRVM) set to 1. To register this service (REG COMSS), the
parameter CFNRVM must be set to 1;
3 – Forward all calls to voice mail: In this case, the subscriber must have the supplementary service “Call forwarding
Unconditional to Voice Mailbox Right” (NSCFUVM) set to 1. To register this service (REG COMSS), the parameter
CFUVM must be set to 1;
4 – Terminal is offline (exclusive for SIP devices): In this case, the subscriber must have the supplementary service
“Call forwarding Offline to Voice Mailbox Right” (NSCFNLVM) set to 1. To register this service (REG COMSS), the
parameter CFNLVM must be set to 1.
Addittionally, the subscriber must have a Voice Mailbox Address Index (VMAIND). This parameter refers to the voice
mail box number configured on ATS.
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SBR:IMPU="sip:[email protected]", NSCFBVM=1, NSMWI=1, VMAIND=1;
Description: This command is used to modify parameters on an existent subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCFBVM (V): This is the supplementary service “Call Forwarding Busy to Voice Mailbox Right”. You must set “0” to
remove, “1” to allow the feature.
NSMWI (V): This is the supplementary service “Message Waiting Indication Right”. You must set “0” to remove, “1”
to allow the feature.
VMAIND (V): This parameter refers to the voice mail box number configured on ATS. For this project, we will use “1”
for all the cases. In the future, if GVT installs a new Voice Mailbox platform, it can be changed for other values,
according to the network configuration.
• MOD SS:IMPU="sip:[email protected]",NSCFBVM=1;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 33 -
Description: This command is used to enable the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCFBVM (V): This is the supplementary service “Call Forwarding Busy to Voice Mailbox Right”, You must set “0” to
deactivate, “1” to activate the feature.
• REG COMSS:IMPU="sip:[email protected]",CFBVM=1;
Description: This command is used to register all common supplementary service for a subscriber. When a service is
registered, the service parameter value must be set to 1 (the check box of the service is selected on the SPG2800
Web Portal). The service is activated after being registered.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
CFBVM (F): It specifies the “Call Forwarding Busy to Voice Mailbox Right” of a subscriber. This service is
automatically activated once it is registered.
1.10 Call Forward Unconditional (CFU)
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SS:IMPU="sip:[email protected]",NSCFU=1;
REG CFU:IMPU="sip:[email protected]", DIMPU="tel: 39901188";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]",NSCFU=1;
Description: This command is used to enable the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 34 -
NSCFU (V): This is the supplementary service “Call Forwarding Unconditional Right”, You must set “0” to deactivate,
“1” to activate the feature.
• REG CFU:IMPU="sip:[email protected]", DIMPU="tel: 39901188";
Description: This command is used to register the CFU service. If a subscriber has the CFU service registered, the
incoming calls are unconditionally forwarded to the subscriber defined by Destination IMPU.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
DIMPU (V): This is the Destination IMPU; it specifies the IMPU of a forwarded-to subscriber. It can be a TEL URI or a
SIP URI. It can be a TEL URI or a SIP URI. The rules for setting the parameter are as follows:
To configure an IMPU in TEL URI format, type a string such as +556239901188、06239901188 or 39901188
1.11 Change Subscriber Call Source
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SBR:IMPU="sip:[email protected]",CSC=1001;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SBR:IMPU="sip:[email protected]",CSC=1001;
Description: This command is used to modify parameters on an existent subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to
chapter 1.1 Create New SIP subscriber.
CSC (V): It specifies the call source code of the subscriber.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 35 -
1.12 Outgoing Call Barring (Cadeado Eletrônico)
/****************************AT SPG web portal********************************/
//When subscriber selects K value
USE ME:MENAME=ATS;
MOD SBR:IMPU="sip:[email protected]",NSCBA=1;
MOD SS:IMPU="sip:[email protected]",NSCBA=1, ;
//When subscriber has default K value (can only activate / deactivate the feature)
USE ME:MENAME=ATS;
MOD SBR:IMPU="sip:[email protected]",NSCBA=1, KVALUE=K3;
MOD SS:IMPU="sip:[email protected]",NSCBA=1;
1.12.1 Command Description
1.12.1.1 When subscriber selects K value
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SBR:IMPU="sip:[email protected]",NSCBA=1;
Description: This command is used to modify a specific or a group of parameters on a subscriber. In this case, it
enables the subscriber to use CBA feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCBA(V): This is the supplementary service “Outgoing Call Barring Right”, You must set “0” to remove, “1” to set
the feature.
• MOD SS:IMPU="sip:[email protected]",NSCBA=1;
Description: This command is used to enable the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCBA(V): This is the supplementary service “Outgoing Call Barring Right”, You must set “0” to deactivate, “1” to
activate the feature.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 36 -
1.12.1.1 When subscriber has default K value
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SBR:IMPU="sip:[email protected]",NSCBA=1,KVALUE=K3;
Description: This command is used to modify a specific or a group of parameters on a subscriber. In this case, it
enables the subscriber to use CBA feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCBA(V): This is the supplementary service “Outgoing Call Barring Right”, You must set “0” to remove, “1” to set
the feature.
KVALUE(V): This is the predefined barring level for this user. It means, the subscriber can only activate or deactivate
one type of call barring. Below is a table with the available barring levels:
Barring Level Blocking Scenarios
K0 Local Mobile K1 National Long Distance K2 International Long Distance K3 0900; 0300 and 0500 K4 Local Mobile and National Long Distance K5 Local Mobile and International Long Distance K6 Local Mobile; 0900; 0300 and 0500 K7 National and International Long Distance K8 National Long Distance; 0900; 0300 and 0500 K9 International Long Distance; 0900; 0300 and 0500 K10 Mobile; National and International Long Distance K11 Mobile; International Long Distance; 0900; 0300 and 0500 K12 National and International Long Distance; 0900; 0300 and 0500 K13 Mobile; National and International Long Distance; 0900; 0300 and 0500
• MOD SS:IMPU="sip:[email protected]",NSCBA=1;
Description: This command is used to enable the authority to use the feature for a predefined K value.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCBA(V): This is the supplementary service “Outgoing Call Barring Right”, You must set “0” to deactivate, “1” to
activate the feature.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 37 -
1.12.2 Terminal commands
1.12.1.1 When subscriber selects K value
* 66 * PPPP * KK # = Activate CBA feature. PPPP is the password with 4 digits, KK is the K value from 00 to 13.
# 66 * PPPP # = Deactivate CBA feature. PPPP is the password with 4 digits.
*# 67*OPWD*NPWD # = Change the user password.
1.12.1.1 When subscriber has default K value
# 66 # = Activate CBA feature.
# 66 * PPPP # = Deactivate CBA feature. PPPP is the password with 4 digits.
*# 67*OPWD*NPWD # = Change the user password.
1.13 Calling Line Identification Presentation (CLIP)
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SS:IMPU="sip:[email protected]",NSCLIP=1;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]",NSCLIP=1;
Description: This command is used to enable the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCLIP (V): This is the supplementary service “Calling Line Identification Presentation Right”, You must set “0” to
deactivate, “1” to activate the feature.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 38 -
1.14 SIP PBX subscribers
1.14.1 PBXSBR with valid subscriber number (DNH)
/****************************AT SPG web portal********************************/
USE ME:MENAME=WORKFLOW;
ADD PBX: MEGROUP="ATS_VPBX", GDN="tel:+556239901193",QUL=1,SGM=0,MDF=0,PAC=0, SNDP=0 ,CHT=0;
ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193",GDN="tel:+556239901193",PSN=0;
ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901194",GDN="tel:+556239901193",PSN=1;
ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901195",GDN="tel:+556239901193",PSN=2;
ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901196",GDN="tel:+556239901193",PSN=3;
Command Description
IMPORTANT: PBX subscribers are, first of all, SIP or H248 subscribers. So before do this procedure, the subscribers
must be created by following the procedure described on the Chapter 1.1 or 1.2.
• USE ME:MENAME=WORKFLOW;
Description: For PBX and Centrex service provisioning, the MENAME must be “WORKFLOW”, it specifies the
command will be performed in service flow mode. In service flow mode the command will be sent to both two ATS
sites in one redundancy group. Here, this parameter should be set to “WORKFLOW”, as the fixed value.
The MENAME with “WORKFLOW” value can only be used when perform on SPG as a “Batch Task”. In soap interface
between BSS and SPG, only need to specify the MEGROUP with the “ATS_VPBX” value. Only Virtual PBX
ADD/RMV/MOD/LST PBX, ADD/RMV/MOD/LST PBXSBR need to follow the following principle, for the soap format
detail, please refer <ATS9900 Service Provisioning Interface.chm>.
ADD PBX: MEGROUP="ATS_VPBX", GDN="tel:+556239901193",QUL=1,SGM=0,MDF=0,PAC=0, SNDP=0,CHT=0;
Description: This command is used to add a PBX service data record to the configuration database. To add a PBX
service data record is to configure a PBX group, so that subscribers in the group can be selected to answer calls.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by the user policy configuration. For this issue, there is a redundancy ME group named “ATS_VPBX”. Here, this
parameter should be set to “ATS_VPBX”, as the fixed value.
GDN (V): It specifies the access code of the PBX group for incoming calls. When an out-PBX subscriber dials the PBX
pilot number, the call processing software selects a subscriber in the PBX group based on a specific line hunting
mode, or queues the call when all PBX subscribers are busy.
A PBX pilot number can be an existing number in the subscriber data table, namely, a valid subscriber number pre-
defined by running ADD SBR. Such a PBX pilot number is not only an access code, but also has all the attributes of an
ordinary subscriber.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 39 -
A PBX pilot number can also be a number that does not exist in the subscriber data table. Such a PBX pilot number is
only an access code, and cannot be defined as an ordinary subscriber number by running ADD SBR.
QUL (V): It specifies whether the PBX group supports the queuing function. If the parameter is set to 1 (YES), it
indicates that when a call is addressed to the PBX pilot number and all the subscribers in the PBX group are busy,
then the ATS adds the call to the call queue instead of playing the busy tone to the caller. When subscribers in the
PBX group become idle, the ATS connects the calls in the queue to the idle subscribers according to the "first in, first
out" principle. If the parameter is set to 0 (NO), it indicates that when a call is addressed to the PBX pilot number
and all the subscribers in the PBX group are busy, and then the ATS releases the call directly. The recommend
configuration is set this parameter to 1 (YES) for all the cases.
SGM (V): It specifies the mode in which the ATS selects a subscriber for answering a call addressed to the PBX pilot
number. Options:
• MIN(FROM_SMALL_TO_LARGE): The ATS always selects the subscriber with the minimum equipment ID. This
mode helps to select the preferred subscribers.
• MAX(FROM_LARGE_TO_SMALL): The ATS always selects the subscriber with the maximum equipment ID. This
mode helps to select the preferred subscribers.
• CYC(CYCLIC): The ATS9900 selects PBX subscribers based on the sequence when idle PBX subscribers are added
and PBX subscribers are released, and then forms a queue. In subsequent calls, the ATS9900 selects PBX subscribers
based on the queue sequence.
• UNIFORM(UNIFORM): All the idle subscribers are queued in ascending order based on their record numbers (the
sequences that the PBX subscribers are added by running ADD PBXSBR or MOD PBXSBR). After being selected to
answer calls and then released, the subscribers are queued again in the same way. Each release subscriber is added
to the end of the queue in turn automatically. After all the subscribers in the previous queue are selected, the ATS
selects the subscribers in the current queue. The recommended value for this parameter is 0 (MIN -
FROM_SMALL_TO_LARGE), but it can be configured according to subscriber requirement.
MDF (V): It specifies whether the ATS provides the simultaneous ringing function for the PBX pilot number. The
default value is 0 (NO), which indicates that when a call is addressed to the PBX pilot number, the idle subscribers in
the PBX group are selected based on the configured line hunting mode. If the parameter is set to 1 (YES), it indicates
that when a call is addressed to the PBX pilot number, the phones of all the idle subscribers in the PBX group ring
simultaneously. The recommended value for this parameter is 0 (NO), but it can be configured according to
subscriber requirement.
PAC (V): It specifies whether the ATS displays the PBX pilot number to the callee when a PBX subscriber makes a call.
For PBX group where the associated numbers has valid number (DNH), this value must be 0 (NO).
SNDP (V): It specifies whether the ATS adds the pilot number AVP to be sent to the CCF or the OCS, for charging
issues. Note that the operation specified by the parameter is different from the operation specified by Use pilot
number as caller number. Send pilot number mode controls only the contents of the AVP to be sent to the CCF or
the OCS. Options:
DNTH(DO_NOTHING): The system performs the processing as that carried out for an ordinary subscriber.
SDPL(SEND_PILOT): The system sends the PBX pilot number during the charging.
RPLC(REPLACE_CALLER_NUM): The system records the PBX pilot number into original caller AVP during the charging.
For PBX group where the associated numbers has valid number (DNH), this value must be 0 (DO_NOTHING).
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 40 -
CHT (V): It indicates whether the PBX group supports non-pilot number line hunting. If this parameter is set to 1
(Yes), the system performs line hunting in a call addressed to a non-pilot number in the PBX group, and the service
experience is the same as that provided in a call addressed to a pilot number. If this parameter is set to 0 (No), the
system does not perform line hunting in a call addressed to a non-pilot number in the PBX group, and the service
experience is the same as that provided in a call addressed to an ordinary subscriber. The recommended value for
this parameter is 0 (NO), but it can be configured according to subscriber requirement.
• ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193",GDN="tel:+556239901193",PSN=0;
• ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901194",GDN="tel:+556239901193",PSN=1;
• ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901195",GDN="tel:+556239901193",PSN=2;
• ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901196",GDN="tel:+556239901193",PSN=3;
Description: This command is used to add a PBX subscriber data record to the configuration database. To add a PBX
subscriber data record is to add a PBX subscriber and configure the attributes of the PBX subscriber.
MEGROUP (F): It specifies the name of an ME group. If this parameter is specified, the command is run on the
specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by
the user policy configuration. For this issue, there is a redundancy ME group named “ATS_VPBX”. Here, this
parameter should be set to “ATS_VPBX”, as the fixed value.
IMPU (V): It defines an IMPU for a subscriber in the ATS9900 configuration database. Its value can be in TEL URI or
SIP URI format.
GDN (V): It specifies the pilot number of the PBX group to which the subscriber belongs. The parameter must be
defined by running ADD PBX before being referenced here.
PSN (V): This is the Line hunting serial number. It specifies the serial number of the PBX subscriber used in line
hunting. The line hunting mode is configured by running ADD PBX or MOD PBX. When a call is addressed to the PBX
pilot number, the system selects a proper line hunting serial number based on the line hunting mode. Thus, the call
is connected to the corresponding subscriber.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 41 -
1.14.2 PBXSBR with virtual subscriber number (DLH)
/****************************AT SPG web portal********************************/
USE ME:MENAME=WORKFLOW;
ADD PBX: MEGROUP="ATS_VPBX", GDN="tel:+556239901193",QUL=1,SGM=0,MDF=0,PAC=1, SNDP=2 ,CHT=0;
ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193",GDN="tel:+556239901193",PSN=0;
ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193101",GDN="tel:+556239901193",PSN=1;
ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193102",GDN="tel:+556239901193",PSN=2;
ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193103",GDN="tel:+556239901193",PSN=3;
Command Description
IMPORTANT: PBX subscribers are, first of all, SIP or H248 subscribers. So before do this procedure, the subscribers
must be created by following the procedure described on the Chapter 1.1 or 1.2.
• USE ME:MENAME=WORKFLOW;
Description: For PBX and Centrex service provisioning, the MENAME must be “WORKFLOW”, it specifies the
command will be performed in service flow mode. In service flow mode the command will be sent to both two ATS
sites in one redundancy group. Here, this parameter should be set to “WORKFLOW”, as the fixed value.
The MENAME with “WORKFLOW” value can only be used when perform on SPG as a “Batch Task”. In soap interface
between BSS and SPG, only need to specify the MEGROUP with the “ATS_VPBX” value. Only Virtual PBX
ADD/RMV/MOD/LST PBX, ADD/RMV/MOD/LST PBXSBR need to follow the following principle, for the soap format
detail, please refer <ATS9900 Service Provisioning Interface.chm>.
• ADD PBX: MEGROUP="ATS_VPBX", GDN="tel:+556239901193",QUL=1,SGM=0,MDF=0,PAC=1,SNDP=2,CHT=0;
Description: This command is used to add a PBX service data record to the configuration database. To add a PBX
service data record is to configure a PBX group, so that subscribers in the group can be selected to answer calls.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by the user policy configuration. For this issue, there is a redundancy ME group named “ATS_VPBX”. Here, this
parameter should be set to “ATS_VPBX”, as the fixed value.
GDN (V): It specifies the access code of the PBX group for incoming calls. When an out-PBX subscriber dials the PBX
pilot number, the call processing software selects a subscriber in the PBX group based on a specific line hunting
mode, or queues the call when all PBX subscribers are busy.
A PBX pilot number can be an existing number in the subscriber data table, namely, a valid subscriber number pre-
defined by running ADD SBR. Such a PBX pilot number is not only an access code, but also has all the attributes of an
ordinary subscriber.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 42 -
A PBX pilot number can also be a number that does not exist in the subscriber data table. Such a PBX pilot number is
only an access code, and cannot be defined as an ordinary subscriber number by running ADD SBR.
QUL (V): It specifies whether the PBX group supports the queuing function. If the parameter is set to 1 (YES), it
indicates that when a call is addressed to the PBX pilot number and all the subscribers in the PBX group are busy,
then the ATS adds the call to the call queue instead of playing the busy tone to the caller. When subscribers in the
PBX group become idle, the ATS connects the calls in the queue to the idle subscribers according to the "first in, first
out" principle. If the parameter is set to 0 (NO), it indicates that when a call is addressed to the PBX pilot number
and all the subscribers in the PBX group are busy, and then the ATS releases the call directly. The recommend
configuration is set this parameter to 1 (YES) for all the cases.
SGM (V): It specifies the mode in which the ATS selects a subscriber for answering a call addressed to the PBX pilot
number. Options:
• MIN(FROM_SMALL_TO_LARGE): The ATS always selects the subscriber with the minimum equipment ID. This
mode helps to select the preferred subscribers.
• MAX(FROM_LARGE_TO_SMALL): The ATS always selects the subscriber with the maximum equipment ID. This
mode helps to select the preferred subscribers.
• CYC(CYCLIC): The ATS9900 selects PBX subscribers based on the sequence when idle PBX subscribers are added
and PBX subscribers are released, and then forms a queue. In subsequent calls, the ATS9900 selects PBX subscribers
based on the queue sequence.
• UNIFORM(UNIFORM): All the idle subscribers are queued in ascending order based on their record numbers (the
sequences that the PBX subscribers are added by running ADD PBXSBR or MOD PBXSBR). After being selected to
answer calls and then released, the subscribers are queued again in the same way. Each release subscriber is added
to the end of the queue in turn automatically. After all the subscribers in the previous queue are selected, the ATS
selects the subscribers in the current queue. The recommended value for this parameter is 0 (MIN -
FROM_SMALL_TO_LARGE), but it can be configured according to subscriber requirement.
MDF (V): It specifies whether the ATS provides the simultaneous ringing function for the PBX pilot number. The
default value is 0 (NO), which indicates that when a call is addressed to the PBX pilot number, the idle subscribers in
the PBX group are selected based on the configured line hunting mode. If the parameter is set to 1 (YES), it indicates
that when a call is addressed to the PBX pilot number, the phones of all the idle subscribers in the PBX group ring
simultaneously. The recommended value for this parameter is 0 (NO), but it can be configured according to
subscriber requirement.
PAC (V): It specifies whether the ATS displays the PBX pilot number to the callee when a PBX subscriber makes a call.
For PBX group where the associated numbers are virtual (DLH), this value must be 1 (YES).
SNDP (V): It specifies whether the ATS adds the pilot number AVP to be sent to the CCF or the OCS, for charging
issues. Note that the operation specified by the parameter is different from the operation specified by Use pilot
number as caller number. Send pilot number mode controls only the contents of the AVP to be sent to the CCF or
the OCS. Options:
DNTH(DO_NOTHING): The system performs the processing as that carried out for an ordinary subscriber.
SDPL(SEND_PILOT): The system sends the PBX pilot number during the charging.
RPLC(REPLACE_CALLER_NUM): The system records the PBX pilot number into original caller AVP during the charging.
For PBX group where the associated numbers are virtual (DLH), this value must be 2 (REPLACE_CALLER_NUM).
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 43 -
CHT (V): It indicates whether the PBX group supports non-pilot number line hunting. If this parameter is set to 1
(Yes), the system performs line hunting in a call addressed to a non-pilot number in the PBX group, and the service
experience is the same as that provided in a call addressed to a pilot number. If this parameter is set to 0 (No), the
system does not perform line hunting in a call addressed to a non-pilot number in the PBX group, and the service
experience is the same as that provided in a call addressed to an ordinary subscriber. The recommended value for
this parameter is 0 (NO), but it can be configured according to subscriber requirement.
• ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193",GDN="tel:+ 556239901193",PSN=0;
• ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193101",GDN="tel:+ 556239901193",PSN=1;
• ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193102",GDN="tel:+ 556239901193",PSN=2;
• ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193103",GDN="tel:+ 556239901193",PSN=3;
Description: This command is used to add a PBX subscriber data record to the configuration database. To add a PBX
subscriber data record is to add a PBX subscriber and configure the attributes of the PBX subscriber.
NOTE: the virtual number provisioning has defined with GVT Engineering according to the follow standard:
IMPU=PilotNumber+XXX, where XXX is an extension from 100 to 199 (to do not conflict with One-number
extensions). To facilitate the operations, the first virtual number which occupies the PSN 1, will be created with the
extension 101, for PSN 2, the extension is 102 and so on.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the
specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by
the user policy configuration. For this issue, there is a redundancy ME group named “ATS_VPBX”. Here, this
parameter should be set to “ATS_VPBX”, as the fixed value.
IMPU (V): It defines an IMPU for a subscriber in the ATS9900 configuration database. Its value can be in TEL URI or
SIP URI format.
GDN (V): It specifies the pilot number of the PBX group to which the subscriber belongs. The parameter must be
defined by running ADD PBX before being referenced here.
PSN (V): This is the Line hunting serial number. It specifies the serial number of the PBX subscriber used in line
hunting. The line hunting mode is configured by running ADD PBX or MOD PBX. When a call is addressed to the PBX
pilot number, the system selects a proper line hunting serial number based on the line hunting mode. Thus, the call
is connected to the corresponding subscriber.
1.15 H.248 PBX subscribers
The procedure is the same used for SIP subscribers, the only difference is about the access part when adding
subscriber on ATS (ADD SBR). Please refer to Chapter 1.14.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 44 -
1.16 Change Subscriber Restriction Group from 1029 to none 65535
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SBR:IMPU="sip:[email protected]", CSC=1029, LMTGRP=65534;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SBR:IMPU="sip:[email protected]",CSC=1029,LMTGRP=65534;
Description: This command is used to modify parameters on an existent subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscribers.
CSC (V): It specifies the call source code of the subscriber.
LMTGRP (V): It specifies the restriction group of this subscriber. Some call sources uses restriction group to forbid
specific calls, like LDN, International, other. You can check some examples of restriction groups used on this project
in the Chapter 2 – Configuration According to the Class of Service (NCOS).
1.17 Remove Conference Authority from Subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
• MOD SS:IMPU="sip:[email protected]",NSNPTY=0;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]",NSNPTY=0;
Description: This command is used to remove the authority to use the feature.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 45 -
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSNPTY (V): This is the supplementary service “Conference Call Right”, You must set “0” to deactivate, “1” to
activate the feature.
1.18 Remove Call Waiting Authority from Subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SS:IMPU="sip:[email protected]",NSCW=0;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]",NSCW=0;
Description: This command is used to remove the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCW (V): This is the supplementary service “Call Waiting Right”, You must set “0” to deactivate, “1” to activate the
feature.
1.19 Remove CFU from subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SS:IMPU="sip:[email protected]",NSCFU=0;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]",NSCFU=0;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 46 -
Description: This command is used to remove the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCFU (V): This is the supplementary service “Call Forwarding Unconditional Right”, You must set “0” to deactivate,
“1” to activate the feature.
1.20 Change Subscriber Call Source
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SBR:IMPU="sip:[email protected]",CSC=1001;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SBR:IMPU="sip:[email protected]", CSC=1001;
Description: This command is used to modify parameters on an existent subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to
chapter 1.1 Create New SIP subscriber.
CSC (V): It specifies the call source code of the subscriber.
1.21 Remove Outgoing Call Barring (Cadeado Eletrônico) from subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SS:IMPU="sip:[email protected]",NSCBA=0;
Command Description
• USE ME:MENAME=ATS;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 47 -
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]",NSCBA=0;
Description: This command is used to remove the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCBA (V): This is the supplementary service “Outgoing Call Barring Right”, You must set “0” to deactivate, “1” to
activate the feature.
1.22 Remove CLIP authority from subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SS:IMPU="sip:[email protected]",NSCLIP=0;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]",NSCLIP=0;
Description: This command is used to remove the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCLIP (V): This is the supplementary service “Calling Line Identification Presentation Right”, You must set “0” to
deactivate, “1” to activate the feature.
1.23 Remove SIP subscriber from a PBX group
/****************************AT SPG web portal********************************/
USE ME:MENAME=WORKFLOW;
RMV PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]";
Command Description
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 48 -
• USE ME:MENAME=WORKFLOW;
Description: For details, please refer to Chapter 1.14.
• RMV PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]";
Description: This command is used to remove a PBX subscriber data record from the configuration database.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by the user policy configuration. we have created a redundancy ME group named “ATS_VPBX”. Here, this parameter
should be set to “ATS_VPBX”, as the fixed value.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to
chapter 1.1 Create New SIP subscribers.
1.24 Remove H.248 Subscriber from a PBX group
/****************************AT SPG web portal********************************/
USE ME:MENAME=WORKFLOW;
RMV PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=WORKFLOW;
Description: For details, please refer to Chapter 1.14.
• RMV PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]";
Description: This command is used to remove a PBX subscriber data record from the configuration database.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by the user policy configuration. we have created a redundancy ME group named “ATS_VPBX”. Here, this parameter
should be set to “ATS_VPBX”, as the fixed value.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to
chapter 1.1 Create New SIP subscribers.
1.25 Reset Subscriber Password to default value (Cadeado Eletrônico)
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 49 -
MOD SBR:IMPU="sip:[email protected]",COP="1234";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SBR:IMPU="sip:[email protected]",COP="1234";
Description: This command is used to modify parameters on an existent subscriber. In this case, this command line
is to change the password used for the supplementary service “Outgoing Call Barring (Cadeado Eletronico)”.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
COP (V): It specifies the call-out password of a subscriber. This parameter is used in the Outgoing Call Barring
service. For this project, the standard is a numeric sequence with four digits.
1.26 List Call Waiting
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
LST SS:IMPU="sip:[email protected]";
DSP COMSS:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• LST SS:IMPU="sip:[email protected]";
Description: This command is used to check if the subscriber has the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to
chapter 1.1 Create New SIP subscriber.
*** For information about this feature, check if the subscriber contains the “Call Waiting Right” feature.
• DSP COMSS:IMPU="sip:[email protected]";
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 50 -
Description: This command is used to display all common supplementary service for a subscriber, if the SS appears
on the command result, it means that it’s activated.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to
chapter 1.1 Create New SIP subscriber.
*** For information about this feature, check if the subscriber contains the “Call Waiting Right” feature.
1.27 List Conference
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
LST SS:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• LST SS:IMPU="sip:[email protected]";
Description: This command is used to check if the subscriber has the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
*** For information about this feature, check if the subscriber contains the “Conference Call Right” feature.
1.28 List Voice Mail Service
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
LST SS:IMPU="sip:[email protected]";
DSP COMSS:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 51 -
• LST SBR:IMPU="sip:[email protected]";
Description: This command is used to list basic subscriber data. Unless otherwise specified, parameters related with
service authority in this command use 0 to indicate that the subscriber does not have the service authority, and 1 to
indicate that the subscriber has the service authority.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
*** For information about this command, look for these parameters:
• Call Forwarding Unconditional to Voice Mailbox Right: It specifies the Call Forwarding Unconditional to
Voice Mailbox (CFUVM) service right of a subscriber.
• Call Forwarding Busy to Voice Mailbox Right: It specifies the Call Forwarding Busy to Voice Mailbox (CFBVM)
service right of a subscriber.
• Call Forwarding No Reply to Voice Mailbox Right: It specifies the Call Forwarding No Reply to Voice Mailbox
(CFNRVM) service right of a subscriber.
• DSP COMSS:IMPU="sip:[email protected]";
Description: This command is used to display all common supplementary service for a subscriber, if the SS appears
on the command result, it means that it’s activated.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
*** For information about this command, look for these parameters:
• Call Forwarding Unconditional to Voice Mailbox Right: It specifies the Call Forwarding Unconditional to
Voice Mailbox (CFUVM) service right of a subscriber.
• Call Forwarding Busy to Voice Mailbox Right: It specifies the Call Forwarding Busy to Voice Mailbox (CFBVM)
service right of a subscriber.
• Call Forwarding No Reply to Voice Mailbox Right: It specifies the Call Forwarding No Reply to Voice Mailbox
(CFNRVM) service right of a subscriber.
1.29 List CFU (Call Forwarding Unconditional)
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
LST SS:IMPU="sip:[email protected]";
DSP CFU:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 52 -
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• LST SS:IMPU="sip:[email protected]";
Description: This command is used to check if the subscriber has the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
*** For information about this feature, check if the subscriber contains the “Call Forwarding Unconditional Right”
feature.
• DSP CFU:IMPU="sip:[email protected]";
Description: This command is used to display the configuration of the CFU service, if it’s activated or deactivated.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
1.30 List Call Source
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
LST SBR:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• LST SBR:IMPU="sip:[email protected]";
Description: This command is used to list basic subscriber data. Unless otherwise specified, parameters related with
service authority in this command use 0 to indicate that the subscriber does not have the service authority, and 1 to
indicate that the subscriber has the service authority.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
*** For information about this command, look for the parameter “Call source code”.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 53 -
1.31 List CLIP
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
LST SS:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• LST SS:IMPU="sip:[email protected]";
Description: List the supplementary services currently configured for this subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
*** For information about this feature, check if the subscriber contains the “Calling Line Identification
Presentation Right” feature.
1.32 List PBX subscribers
/****************************AT SPG web portal********************************/
USE ME:MENAME=WORKFLOW;
LST PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: For details, please refer to Chapter 1.14.
• LST PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]"; or
• LST PBXSBR: MEGROUP="ATS_VPBX";
Description: This command is used to list PBX subscriber data records in the configuration database.
• To list the brief information about all PBX subscriber data records, do not specify any parameter.
• To list the detailed information about a specific PBX scriber data record, specify IMPU.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 54 -
by the user policy configuration. we have created a redundancy ME group named “ATS_VPBX”. Here, this parameter
should be set to “ATS_VPBX”, as the fixed value.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
1.33 List Outgoing Call Barring (Cadeado Eletrônico)
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
LST SS:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• LST SS:IMPU="sip:[email protected]";
Description: List the supplementary services currently configured for this subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
*** For information about this feature, check if the subscriber contains the “Outgoing Call Barring Right”
feature.
1.34 Register CFU from IMS no subscriber intervention
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SS:IMPU="sip:[email protected]",NSCFU=1;
REG CFU:IMPU="sip:[email protected]",BSV=ALL,BSG=TS11,DIMPU="tel: 39901188",NOTIFYCALLER=NO,
PRVTOCER=NO_PRIVACY,PRVTODES=NO_PRIVACY;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]",NSCFU=1;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 55 -
Description: Allow the user to use the Call Forwarding Unconditional supplementary Service.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
NSCFU (V): This is the supplementary service “Call Forwarding Unconditional” and has two conditions, “0” to
deactivate the feature, “1” to activate it.
• REG CFU:IMPU="sip:[email protected]",BSV=ALL,BSG=TS11,DIMPU="tel: 39901188",
NOTIFYCALLER=NO, PRVTOCER=NO_PRIVACY,PRVTODES=NO_PRIVACY;
Description: Register the Call Forwarding Unconditional supplementary Service on IMS system.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
BSV (F): Means the “Basic Service” to apply the feature, it specifies the media type. Only the calls with selected
media types are forwarded. This parameter will be fixed in all the cases.
BSG (F): Means the “Basic Service Group”, and for this network it is configured for group TS11 (telephony services)
only.
DIMPU (V): This is the destination number, and the format can be SIP URI or TEL URI. For this project, we will use
TEL URI format, and the number must follow the same dialing rules as the current dialing plan. For example, if it’s
a CFU to a local number, it must contain 8 digits, if LDN, must contain 0+CSP+AC+number
NOTIFYCALLER (F): It specifies whether to notify the caller when a call is forwarded unconditionally. For this
project , it is set as NO in all the cases.
PRVTOCER (V): It specifies whether to include the Privacy parameter to the History-Info header field (containing
the forwarded-to number) of the 181 message that is sent to the caller when the AS of the service subscriber
triggers the call forwarding service. Now we will use this parameter fixed for all cases, but in the future, if GVT
decides to mark it on the bill, it can be set to other values. The list of values can be obtained on the Huawei IMS
documentation or in the SPG command help.
PRVTODES (V): It specifies whether to include the Privacy parameter to the History-Info header field (containing
the service subscriber number) of the INVITE message that is sent to the forwarded-to subscriber when the AS of
the service subscriber triggers the call forwarding service. Now we will use this parameter fixed for all cases, but in
the future, if GVT decides to mark it on the bill, it can be set to other values. The list of values can be obtained on
the Huawei IMS documentation or in the SPG command help.
1.35 Support Fax Service
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SBR:IMPU="sip:[email protected]",NSFAX=1;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 56 -
• MOD SBR:IMPU="sip:[email protected]",NSFAX=1;
Description: Allow the user to support FAX service.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
NSFAX (V): This is the supplementary service “Support Fax” and has two conditions, “0” to deactivate the feature,
“1” to activate it.
1.36 Set Temporary Suspension of subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
PRK_SBR:IMPU="sip:[email protected]",STYPE=NOALM,TREAT=PLAYTONEANDRELEASE;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• PRK_SBR:IMPU="sip:[email protected]",STYPE=NOALM,TREAT=PLAYTONEANDRELEASE;
Description: This command is used to temporary suspend a subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
STYPE (F): It specifies the seasonal suspend mode of a subscriber. For this project, the parameter is NOALM (NO
ALARM) and is fixed.
TREAT (F): It specifies the processing mode when a subscriber calls a seasonally suspended subscriber. For this
project, the parameter is PLAYTONEANDRELEASE and is fixed.
1.37 Remove Temporary Suspension of subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
RES_PRKSBR:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 57 -
• RES_ PRKSBR:IMPU="sip:[email protected]";
Description: This command is used to restore the temporary suspension of a subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
1.38 List Temporary Suspension of subscriber
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
LST_PRKSBR:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• LST_ PRKSBR:IMPU="sip:[email protected]";
Description: This command is used to list the status of the subscriber with temporary suspension, if the service is
activated or deactivated.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
1.39 MSAN Users – Change the Access Part and keep the Subscriber Number
/****************************AT SPG web portal********************************/
USE ME:MENAME=M2000;
MOD ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]", REGTP=SINGLE, TEN=EID,
EID:“10.140.72.130:2944”, TID="1";
Command Description
• USE ME:MENAME=M2000;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the
Management Server M2000.
• MOD ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]", REGTP=SINGLE, TEN=EID,
EID:“10.140.72.130:2944”, TID="1";
Description: It is a configuration command, and is used to add A-CSCF subscriber data in the configuration
database. This function is used to configure functions provided by the AGCF.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 58 -
SOFTXIP (V): The IP address is the IP of AGCF site. This value is filled according to the actual situation.
PUI(V):Public User ID,The user ID used outside the IMS Core is the public user ID that is used to communicate with
others. The value of this parameter must be the same as the user ID defined on the HSS and ATS.
REGTP (F): Register type. It will be SINGLE register in all situations. This parameter will be fixed.
TEN (V): It specifies the type of the equipment name. This parameter can be “EID” (Equipment ID) or “EDESC”
(Equipment Description). Normally the parameter EID is used for this command.
EID (V): Equipment ID. This is the identification of the Access Node inside the IMS. The notation is the IP address of
the AG(MSAN) + “:” + the signaling port. Example: 10.140.72.130:2944, where 10.140.72.130 is the IP of Keymile
MSAN and 2944 is the signaling port. We can compare it as the V5 ID of the V5 interface.
INFORMATION: IF the subscriber will keep in the same MSAN, but will just change the TID, there is no need to
inform this parameter.
TID (V): Terminal ID. It specifies the physical port number of the MG to which the ESL subscriber belongs. It’s
the identification of the subscriber port for the corresponding Equipment ID. We can compare it to the L3ADDR on
V5 interface.
1.40 MSAN Users – Change the Subscriber Number and keep Access Part
IMPORTANT: For this operation, There is no way to change the number, because the subscriber on ATS is
associated with a record on HSS that uses the subscriber number as index, so a new configuration on HSS
side is also needed. For this reason, the procedure in this case is to remove the subscriber completely and
create it again using the new number. For this operation, please refer to Chapters below:
Chapter 1.4 - Remove H.248 Subscriber
Chapter 1.4 - Create New H.248 subscriber
1.41 Calling Line Identification Restriction (CLIR)
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SS:IMPU="sip:[email protected]",NSCLIR=1;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]",NSCLIR=1;
Description: This command is used to enable the authority to use the feature.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 59 -
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCLIR (V): This is the supplementary service “Calling Line Identification Restriction Right”, You must set “0” to
deactivate, “1” to activate the feature.
1.42 Calling Line Identification Restriction Override (RIO)
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
MOD SS:IMPU="sip:[email protected]",NSRIO=1;
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SS:IMPU="sip:[email protected]",NSRIO=1;
Description: This command is used to enable the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCLIR (V): This is the supplementary service “Calling Line Identification Restriction Override Right”, You must set
“0” to deactivate, “1” to activate the feature.
1.43 List CLIR
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
LST SS:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• LST SS:IMPU="sip:[email protected]";
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 60 -
Description: List the supplementary services currently configured for this subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
*** For information about this feature, check if the subscriber contains the “Calling Line Identification
Restriction Right” feature.
1.44 List RIO
/****************************AT SPG web portal********************************/
USE ME:MENAME=ATS;
LST SS:IMPU="sip:[email protected]";
Command Description
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• LST SS:IMPU="sip:[email protected]";
Description: List the supplementary services currently configured for this subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
*** For information about this feature, check if the subscriber contains the “Calling Line Identification
Restriction Override Right” feature.
1.45 Apply Number Change Announcement for changed number
There is an A number changed to B number, when someone make a call to the A number, this call will route to an
announcement equipment to tell the caller that A number had changed to B number. The configuration only needs
to do on the site of which the A number is located. You can modify the current record or add a new one.
1.45.1 Modify a current record for number change announcement:
MOD CNACLD: P=41, PFX=K'30166489, RSNAME="RS_259", DNCATCODE="5858";
Description: if you could find the full number analysis by the CNACLD command, you need to change its RSNAME
(route select name) to the route which leads to the CTA_02, and add the DNCATCODE to 5858.
P (V): It specifies the A number’s local DN set, this value must equal to the area code of the A number.
PFX (V): It specifies the exact A number’s analysis prefix, this value must equal to the A number.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 61 -
RSNAME (V): It specifies the route select name lead to the CTA_02 which connect to the announcement
equipment. All the RSNAME for each site you could get from the table below:
Site RSNAME
SPO RS_209
RJO RS_259
CTA RS_259
MGA RS_209
BHE RS_209
RCE RS_259
DNCATCODE (V): It specifies the A number’s number Category code, this value must equal to 5858.
1.45.2 Add a new record to apply a number change announcement:
ADD CNACLD: P=41, PFX=K'30166489, CSTP=BASE, RSNAME="RS_259", MINL=8, MAXL=8,
ISERVICECHECKNAME="INVALID", NUMNAME="INVALID", CHRGNAME="INVALID", DNCATCODE="5858";
Description: if you could not find the full number analysis by the CNACLD command, you need to add the full
number use ADD CNACLD.
P (V): It specifies the A number’s local DN set, this value must equal to the area code of the A number.
PFX (V): It specifies the exact A number’s analysis prefix, this value must equal to the A number.
RSNAME (V): It specifies the route select name lead to the CTA_02 which connect to the announcement
equipment. All the RSNAME for each site you could get from the table below:
Site RSNAME
SPO RS_209
RJO RS_259
CTA RS_259
MGA RS_209
BHE RS_209
RCE RS_259
MINL (V): This parameter specifies the minimum number length of the A number with the specific call prefix, this
value must equal to the length of the A number.
MAXL (V): This parameter specifies the maximum number length of the A number with the specific call prefix, this
value must equal to the length of the A number.
DNCATCODE (V): It specifies the A number’s number Category code, this value must equal to 5858.
The other parameter in this command you do not need to change.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 62 -
2 Configuration According to the Class of Service (NCOS)
2.1 General Rules: The configuration of the class of service (NCOS) is only done at ATS side. About HSS, ENS and UGC, the
provisioning commands keeps the same. Please refer to the ADD command in the Chapter 1.
When adding a subscriber, four parameters need special attention, as below:
Call Source code (CSC): It defines the source of the call. In IMS, we use this to identify which location this
subscriber belongs to. Subscribers with different call sources cannot do local calls to each other.
Local DN Set (LP): It defines the dialing plan and rules for each are code (AC). Call sources from different
local areas shares the same Local DN set, but the local calls to different areas are blocked by ATS through
CNL control.
Restriction (Barring) Group (LMTGRP): It defines the outgoing call barring profile. Subscribers that have this
parameter configured have restriction to make calls according to a standard defined by NCOS values. For
example Subscribers that has NCOS 2 (block LDN, LDI) must be configured with parameter LMTGRP=2.
ENUM Index (ENUMIDX): It defines the number change profile. Subscribers that have this parameter
configured can have changes in calling or called number according to a standard defined by NCOS values.
For example, subscribers that has NCOS 15 (easy call) must be configured with parameter ENUMIDX=15.
Below is the current call source information for normal subscribers (NCOS 1) for the six sites (from table GVT
IMS Location Info v1.3.xls).
IMPORTANT: This information is based on the current cities that will be implemented. New cities /
location can be implemented in the future, so in this case this table will be feed with new values.
Table 1 – Call source definition for all the cities
IMS Location City
Code CNL AC
Tariff
Area
Location
Info in HSS
Location
Index in
ATS
CallSRC LDNSET
SPO7
SAO PAULO SPO 11000 11 11 SPO_ 1101 1101 11
ARUJA AUJ 11048 11 11 AUJ_ 1101 1101 11
BARUERI BRE 11071 11 11 BRE_ 1101 1101 11
BIRITIBA-MIRIM BMM 11082 11 11 BMM_ 1101 1101 11
CAIEIRAS CER 11130 11 11 CER_ 1101 1101 11
CAJAMAR CJR 11132 11 11 CJR_ 1101 1101 11
CARAPICUIBA CIV 11151 11 11 CIV_ 1101 1101 11
COTIA COA 11176 11 11 COA_ 1101 1101 11
DIADEMA DDA 11185 11 11 DDA_ 1101 1101 11
EMBU EMB 11202 11 11 EMB_ 1101 1101 11
EMBU-GUACU EBG 11203 11 11 EBG_ 1101 1101 11
FERRAZ DE VASCONCELOS FAV 11220 11 11 FAV_ 1101 1101 11
FRANCISCO MORATO FAT 11229 11 11 FAT_ 1101 1101 11
FRANCO DA ROCHA FCR 11227 11 11 FCR_ 1101 1101 11
GUARAREMA GRM 11251 11 11 GRM_ 1101 1101 11
GUARULHOS GRS 11892 11 11 GRS_ 1101 1101 11
ITAPECERICA DA SERRA ICS 11291 11 11 ICS_ 1101 1101 11
ITAPEVI ITE 11294 11 11 ITE_ 1101 1101 11
ITAQUAQUECETUBA IAQ 11300 11 11 IAQ_ 1101 1101 11
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 63 -
JANDIRA JAD 11318 11 11 JAD_ 1101 1101 11
JUQUITIBA JQB 11330 11 11 JQB_ 1101 1101 11
MAIRIPORA MAR 11358 11 11 MAR_ 1101 1101 11
MAUA MAU 11370 11 11 MAU_ 1101 1101 11
MOGI DAS CRUZES MCZ 11381 11 11 MCZ_ 1101 1101 11
OSASCO OCO 11425 11 11 OCO_ 1101 1101 11
PIRAPORA DO BOM JESUS PPJ 11480 11 11 PPJ_ 1101 1101 11
POA POA 11488 11 11 POA_ 1101 1101 11
RIBEIRAO PIRES RPS 11528 11 11 RPS_ 1101 1101 11
RIO GRANDE DA SERRA RGS 11964 11 11 RGS_ 1101 1101 11
SALESOPOLIS SEP 11582 11 11 SEP_ 1101 1101 11
SANTA ISABEL SBL 11623 11 11 SBL_ 1101 1101 11
SANTANA DE PARNAIBA SPB 11589 11 11 SPB_ 1101 1101 11
SANTO ANDRE SNE 11633 11 11 SNE_ 1101 1101 11
SAO BERNARDO DO CAMPO SBO 11548 11 11 SBO_ 1101 1101 11
SAO CAETANO DO SUL SCN 11550 11 11 SCN_ 1101 1101 11
SAO LOURENCO DA SERRA SALS 11564 11 11 SALS 1101 1101 11
SUZANO SZN 11641 11 11 SZN_ 1101 1101 11
TABOAO DA SERRA TBS 11644 11 11 TBS_ 1101 1101 11
VARGEM GRANDE PAULISTA VPA 12210 11 11 VPA_ 1101 1101 11
RJO6
RIO DE JANEIRO RJO 21000 21 21 RJO_ 2101 2101 21
NITERÓI NRI 21188 21 21 NRI_ 2101 2101 21
BELFORD ROXO BERO 21037 21 21 BERO 2101 2101 21
DUQUE DE CAXIAS DQX 21088 21 21 DQX_ 2101 2101 21
NOVA IGUAÇU NIU 21199 21 21 NIU_ 2101 2101 21
CTA7
CURITIBA CTA 41000 41 412 CTA_ 4102 4102 41
ARAUCARIA AUC 41049 41 412 AUC_ 4102 4102 41
CAMPO LARGO CLG 41119 41 412 CLG_ 4102 4102 41
PINHAIS PNIS 41486 41 412 PNIS 4102 4102 41
PIRAQUARA PQA 41495 41 412 PQA_ 4102 4102 41
SAO JOSE DOS PINHAIS SJP 41585 41 412 SJP_ 4102 4102 41
ALMIRANTE TAMANDARE ATT 41015 41 412 ATT_ 4102 4102 41
COLOMBO CBX 41161 41 412 CBX_ 4102 4102 41
FAZENDA RIO GRANDE FZR 41919 41 412 FZR_ 4102 4102 41
MGA4
CAMPO MOURAO CPM 41122 44 448 CPM_ 4408 4408 44
CIANORTE CNE 41151 44 447 CNE_ 4407 4407 44
MARIALVA MRV 41382 44 442 MRV_ 4402 4402 44
MARINGA MGA 41389 44 442 MGA_ 4402 4402 44
PAICANDU PNU 41447 44 442 PNU_ 4402 4402 44
PARANAVAI PVA 41466 44 444 PVA_ 4404 4404 44
SARANDI SWW 41628 44 442 SWW_ 4402 4402 44
UMUARAMA UMR 41711 44 446 UMR_ 4406 4406 44
RCE3
RECIFE RCE 81000 81 812 RCE_ 8102 8102 81
JABOATAO DOS GUARARAPES JBO 81083 81 812 JBO_ 8102 8102 81
OLINDA OLD 81103 81 812 OLD_ 8102 8102 81
PAULISTA PUI 81115 81 812 PUI_ 8102 8102 81
CAMARAGIBE CGB 81200 81 812 CGB_ 8102 8102 81
CABO DE SANTO AGOSTINHO CBO 81029 81 812 CBO_ 8102 8102 81
BHE4
BELO HORIZONTE BHE 31000 31 31 BHE_ 3101 3101 31
BETIM BET 31085 31 31 BET_ 3101 3101 31
CONTAGEM CEM 31856 31 31 CEM_ 3101 3101 31
2.2 List of NCOS
Below is a list with the current NCOS implemented on IMS, with description of each service function.
IMPORTANT: For NCOS used for VoIP services (Always local, Vox3G, VoxIP, 9x), there is also a new
procedure. These services will be explained in a separated document that will be provided after the
homologation phase of this solution.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 64 -
Table 2 – NCOS definition
NCOS Call
Source
Barring
Group
Enum
Index Description
1
Refer to
Table 1
65534 65535 Liberado TOTAL
2 2 65535 Bloqueio do DDD 025 e DDI 0025, para outras operadoras pode fazer
3 3 65535 Bloqueio do 0300; 0500; 0900
4 4 65535 Bloqueio do DDD 025; DDI 0025; 0300; 0500; 0900
15 65534 15 Assinante disca sem CSP para DDD (todos) e DDG, após é inserido CSP 25 (ligue fácil)
16 65534 16 Transforma CSP todas as regiões; CSP a cobrar para todos e CSP todos os paises em 025
17 17 65535 Liberado somente para 0800 e 000x (prefixo Webline local)
19 65534 19 Transforma CSP DDD todas as regiões e CSP todos os paises em CSP 25. Nos casos de
chamadas a cobrar é considerado o CSP originalmente discado pelo cliente
20 20 65535 Liberado Chamadas locais ( 2 até 6 ) e 078 – TRANSMIT
21 21 65535 Bloqueio para celular 7; 8; 91 a 99
22 22 65535 Bloqueio do DDD 025; DDI 0025 e para celular 7; 8; 91 a 99
23 23 65535 Bloqueio para celular 7; 8; 91 a 99; 0300;; 0500; 0900
24 24 65535 Bloqueio do DDD 025; DDI 0025 e para celular 7; 8; 91 a 99; 0300; 0500; 0900
25 65534 25 Liberado somente 11x; 190 e 193; 080005xxxxx; caso assinante tente ligar é transferido
para 08006001325
30 65534 30 Igual NCOS 19 xxx_POS mais acesso internacional 100% liberado (não transforma csp
pra internacional)
31 65534 31 Igual NCOS 16 xxx_POS mais acesso internacional 100% liberado (não transforma csp
pra internacional)
32 65534 32 Igual NCOS 1 xxx_POS mais acesso internacional 100% liberado (não transforma csp pra
internacional)
33 65534 33 Igual NCOS 1 – Corporativos PBXRAMAL + 100% LDI Liberado
34 65534 34 Igual NCOS 16– Corporativos PBXRAMAL + 100% LDI Liberado
41 41 65535 Bloqueio para celular 7; 8; 91 a 99 - Corporativos PBXRAMAL com TIC - CLISERV 1041
71 71 65535 Limitador Smart Credits para assinantes com NCOS 1: Bloqueio de VC1 + VC2 e VC3 com
CSP 25
72 72 72 Limitador Smart Credits para assinantes com NCOS 15: Bloqueio de VC1 + VC2 e VC3
com CSP 25
2.3 Commands for provisioning
2.3.1 NCOS 1
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the call source according the “Table 1”.
2.3.2 NCOS 2
USE ME: MENAME=ATS;
MOD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=2,
ENUMIDX=65535;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 65 -
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the call source according the “Table 1”.
2.3.3 NCOS 3
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=3,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the call source according the “Table 1”.
2.3.4 NCOS 4
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=4,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.5 NCOS 15
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=15;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.6 NCOS 16
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=16;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 66 -
2.3.7 NCOS 17
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=17,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.8 NCOS 19
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=19;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.9 NCOS 20
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=20,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.10 NCOS 21
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=21,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.11 NCOS 22
USE ME: MENAME=ATS;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 67 -
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=22,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.12 NCOS 23
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=23,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.13 NCOS 24
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=24,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.14 NCOS 25
USE ME:MENAME=HSS;
ADD HSIFC:IMPU="sip:[email protected]", SIFCID=625;
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=25;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the call source according the “Table 1”
2.3.15 NCOS 30
USE ME: MENAME=ATS;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 68 -
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=30;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.16 NCOS 31
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=31;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.17 NCOS 32
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=32;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.18 NCOS 33
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=33;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.19 NCOS 34
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=34;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 69 -
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.20 NCOS 41
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=41,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.21 NCOS 71
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=71,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.3.22 NCOS 72
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=72,
ENUMIDX=72;
MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the “Table 1”
2.4 General Blocking for Retail Subscribers
2.4.1 xxxBIO
Block
/****************************AT SPG web portal********************************/
USE ME:MENAME=HSS;
ADD HSIFC: IMPU=" sip:[email protected] ", SIFCID=629;
USE ME: MENAME=ATS;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 70 -
MOD SBR:IMPU="sip:[email protected]", OUTRST=NO, INRST=YES, LMTGRP=9001;
MOD SS:IMPU="sip:[email protected]", NSSCCA=0;
Command Description
• USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
• ADD HSIFC:IMPU="sip:[email protected]", SIFCID=629;
Description (V): Add a shared initial filter criteria (iFC) set for the specified IMPU. Each IMPU can be configured with
a maximum of eight shared iFC sets.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SIFCID (V): This is an index value. GVT standard is AC+P, and P can assume the follow values:
1 - For intra-office traffic, used for Retail and Corporate, ex: 621
7- For traffic terminated on UGC, used only for Corporate, ex: 627
8 - For traffic terminated on BCF, used only for Vox IP service, ex 628
9 - For traffic terminated on ATS, used only for General Block service, ex 629
Here an IFC set with index 629 was added to the subscriber, for the purpose of triggering the call to ATS, which the
callee number is Emergency Number, and ATS analyses the callee number, decide the call will reject or not.
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SBR: IMPU="sip:[email protected]", OUTRST=NO, INRST=YES, LMTGRP=9001;
Description: This command is used to modify parameters on an existent subscriber.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
OUTRST (V): It specifies the type of the carrier-determined barring service and the outgoing call restriction status of
a subscriber. If "NO" is selected, all outgoing calls of a subscriber are permitted; if "YES" selected, all outgoing calls
of a subscriber are rejected. Here this parameter should be set to “NO”, because the user can make a call to some
specifically numbers.
INRST (V): It specifies the type of the carrier-determined barring service and the incoming call restriction status of a
subscriber. If "NO" is selected, all incoming calls of a subscriber are permitted; if "YES" selected, all incoming calls of
a subscriber are rejected. Here this parameter should be set to “YES”, because the user cannot receive any call.
LMTGRP (V): It specifies the restriction group number of a specified subscriber. This parameter is used for the
Outgoing Call Barring: Fixed (OCB-F) service. According to GVT’s requirement, for General Blocking service, this
parameter should be 9001.
• MOD SS:IMPU="sip:[email protected]", NSSCCA=0;
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 71 -
Description: This command is used to modify supplementary service authority data of a subscriber.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
NSSCCA (F): It specifies the Collect Call (SCCA) service right of a subscriber. This parameter is one of the elements
Supplement Service Right. Here this parameter should be set to “0”.
Unblock
/****************************AT SPG web portal********************************/
USE ME:MENAME=HSS;
RMV HSIFC: IMPU=" sip:[email protected] ", SIFCID=629;
USE ME: MENAME=ATS;
MOD SBR:IMPU="sip:[email protected]", OUTRST=NO, INRST=NO, LMTGRP=65534;
MOD SS:IMPU="sip:[email protected]", NSSCCA=1;
Command Description
• USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
• RMV HSIFC:IMPU="sip:[email protected]", SIFCID=629;
Description (V): Remove a shared initial filter criteria (iFC) set for the specified IMPU.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SIFCID (V): This is an index value. GVT standard is AC+P, and P can assume the follow values.
1-For intra-office traffic, used for Retail and Corporate, ex: 621
7- For traffic terminated on UGC, used only for Corporate, ex: 627
8 - For traffic terminated on BCF, used only for Vox IP service, ex 628
9 - For traffic terminated on ATS, used only for General Block service, ex 629
Here this parameter should be the same as we added in the Block, using command ADD HSIFC.
• USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
• MOD SBR: IMPU="sip:[email protected]", OUTRST=NO, INRST=NO, LMTGRP=65534;
Description: This command is used to modify parameters on an existent subscriber.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
Huawei IMS Southern South America SSA Project
Provisioning Guide
Open to GVT and Huawei
Copyright by Huawei - 72 -
OUTRST (V): It specifies the type of the carrier-determined barring service and the outgoing call restriction status of
a subscriber. If "NO" is selected, all outgoing calls of a subscriber are permitted; if "YES" selected, all outgoing calls
of a subscriber are rejected. Here this parameter should be set to “NO”.
INRST (V): It specifies the type of the carrier-determined barring service and the incoming call restriction status of a
subscriber. If "NO" is selected, all incoming calls of a subscriber are permitted; if "YES" selected, all incoming calls of
a subscriber are rejected. Here this parameter should set to “NO”.
LMTGRP (V): It specifies the restriction group number of a specified subscriber. This parameter is used for the
Outgoing Call Barring: Fixed (OCB-F) service. If the value of Restriction group is the same as the value of Restriction
group defined by running ADD CLRGRP in the MML Command - ATS9900 window, the call is restricted. Here should
be set as wildcard value “65534” since subscribe is unblocked.
• MOD SS:IMPU="sip:[email protected]", NSSCCA=1;
Description: This command is used to modify supplementary service authority data of a subscriber.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
NSSCCA (F): It specifies the Collect Call (SCCA) service right of a subscriber. This parameter is one of the elements
Supplement Service Right. Here this parameter should be set as GVT’s default value “1”.