IMA Manual Advanced Win ENG

7/30/2019 IMA Manual Advanced Win ENG

1/89

User's Guide (Operation)

ELMO Wireless Slate / Tablet (CRA-1)

Read this User's Guide carefully before using the CRA-1.

Store this User's Guide in a safe place in case you need it again.


2/89

2

oving the

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings,Install in accordance with themanufacturers instructions.8) Do not install near any heat sourcessuch as radiators, heat registers, stoves,or other apparatus (including amplifiers)that produce heat.9) Do not defeat the safety purpose of thepolarized or grounding-type plug. Apolarized plug has two blades with onewider than the other. A grounding typeplug has two blades and a third groundingprong. The wide blade or the third prongare provided for your safety.If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.10) Protect the power cord from beingwalked on or pinched particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.11) Only use attachments/accessoriesspecified by the manufacturer.12) Use only with the cart, stand, tripod,bracket, or tablespecified by themanufacturer, or soldwith the apparatus.When a cart is used,use caution when mcart/apparatus combination to avoidinjury from tip-over.13) Unplug this apparatus during lightingstorms or when unused for long periodsof time.14) Refer all servicing to qualified servicepersonnel. Servicing is required whenthe apparatus has been damaged in anyway, such as power-supply cord or plugis damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rainor moisture, does not operate normally,or has been dropped.

The lightning flash with arrowhead symbol,within an equilateral triangle, is intended toalert the user to the presence of uninsulated"dangerous voltage" within the product'senclosure that may be of sufficient magnitudeto constitute a risk of electric shock to persons.This marking is located at the bottom of

product.The exclamation point within an equilateraltriangle is intended to alert the user to thepresence of important operating andmaintenance (servicing) instructions in theliterature accompanying the product.


3/89

WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THISPRODUCT TO RAIN OR MOISTURE.

WARNING: Handling the cord on this product or cords associated with accessories sold with this product, willexpose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.Wash hands after handling.

NOTICE:This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operationis subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesiredoperation.

Changes or modifications made to this equipment not expressly approved by (manufacturer name)may void the FCC authorization to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. Radiofrequency radiation exposure Information:The radiated output power of the device is far below the FCC radio frequency exposure limits.Nevertheless, the device shall be used in such a manner that the potential for human contactduring normal operation is minimized.

Indonesia: DGPTCRA-1 :17873/SDPPI/2011; PLG.ID 3512CRA-1R:17874/SDPPI/2011; PLG.ID 3512

Malaysia: SIRIMCRA-1 :RAHY/23F/1210/S(10-2149) CRA-1,ELMO COMPANY LTD.

CRA-1R:RAVG/31N/1210/S(10-2150) CRA-1R,ELMO COMPANY LTD.Singapore: IDA

CRA-1 :Approved by IDA for use in Singapore. N2558-10CRA-1R:Approved by IDA for use in Singapore. N2559-10

South Africa: ICASACRA-1 :TA-2010/1494CRA-1R:TA-2010/1493

Thailand: NTCThis telecommunication equipment conforms to NTC technical requirement.

3


4/89

Contents

Before Use .......................... ............................. .............................. ............................. .........6

Main Functions .......................... ............................. .............................. ............................. 7

Supplied Items.................................................................................................................10

Part Names .......................... .............................. .............................. ............................. .. 11

Preparations ............................ .............................. ............................. ............................. 12

Inserting and Charging the Battery Pack.......................................................................12

Inserting the Battery into the Pen .................... ..................... ..................... .................... 13

Installing the Tablet Software (Image Mate Accent).......................................................14

Basic Tablet Operations...................................................................................................16

Basic Pen Operations ..................... ...................... ..................... ...................... ............. 16

Basic Screen Configuration...........................................................................................17

Connections.......................................................................................................................18

Using in a Lesson..............................................................................................................19

Basic Operations in Document Camera Mode ............................. ............................. ......22

Operation ................... ..................... ..................... ..................... ..................... ...............22

Operating the Document Camera ..................... ...................... ..................... ................. 24

Drawing.........................................................................................................................25

Drawing Straight Lines .................... ...................... ...................... ..................... ............. 26

Deleting.........................................................................................................................27 Recording a Lesson ................... ..................... ..................... ..................... .................... 28

Quitting..........................................................................................................................29

Advanced Operations in Document Camera Mode......................... .............................. ..30

Using the Mask ..................... ..................... ..................... ..................... ..................... ....30

Using the Highlight .................... ..................... ...................... ..................... .................... 31

Using the Scroll .................. ..................... ..................... ..................... ...................... ......32

Using Compare Pictures ................... ...................... ...................... ...................... ..........33

Whiteboard Mode .......................... ............................. .............................. ....................... 34 Operation ................... ..................... ..................... ..................... ..................... ...............34

Changing the Background.............................................................................................34

Setting the Computer Images as the Background.........................................................37

Teaching Material Import Mode ........................... ............................. .............................. .39

Operation ................... ..................... ..................... ..................... ..................... ...............39

Selecting a Teaching Material .................... ..................... ...................... ...................... ..39

Selecting a Video ................... ..................... ..................... ..................... ..................... ...40

Deleting a Teaching Material .................... ...................... ..................... ...................... ....41

Menu List.........................................................................................................................44

Document Camera Mode .................... ..................... ...................... ...................... .........44

4


5/89

Whiteboard Mode..........................................................................................................47

Teaching Material Import Mode ..................... ...................... ...................... .................... 49

Function List ............................ ............................... ............................... .......................... 51

Creating Teaching Materials.............................................................................................52

Teaching Material Creation Mode....................................................................................53 Operation ................... ..................... ..................... ..................... ..................... ...............53

Creating a Teaching Material with the Document Camera ...................... ...................... 54

Creating a Teaching Material with a Method Other Than the Document Camera.......... 57

File Operations..............................................................................................................64

Menu List.........................................................................................................................67

Teaching Material Creation Mode..................................................................................67

Function List ............................ ............................... ............................... .......................... 69

Various Settings ......................... .............................. ............................. ............................ 70 Setting Mode .......................... .............................. ............................. .............................. 71

Tablet Status Display.....................................................................................................72

Setting the Pen..............................................................................................................73

Other Functions.................................................................................................................74

Replacing the Pen Tip ......................... .............................. ............................. .................74

Storing the Wireless Adapter and Pen.............................................................................74

About the LEDs ........................... .............................. ............................. ......................... 75

Setting the Pen Writing Style............................... ............................. .............................. .76

Adding a Stamp ........................... .............................. ............................. ......................... 78

Wireless Communication Settings for the Tablet ............................ ............................ .....79

Troubleshooting ............................. .............................. ............................. ........................80

Product Specifications ............................ ............................. .............................. ..............83

Product Specifications .......................... ............................. ............................ ..................83

System Requirements ........................... ............................... ............................... ............84

About the Separately Sold Accessories............................................ ............................. ..85

Usage Precautions .......................... ............................. .............................. ..................... 85

Disclaimer........................................................................................................................87

About Trademarks ............................. .............................. ............................. ...................87

About the Warranty........................ ............................. .............................. ....................... 88

5


6/89

Before UseThank you very much for purchasing this product.Please read this manual carefully to make suitable use of the Tablet. Also,please be sure to refer to any supplemental information included with thisproduct.

Caution

Please note that screens and figures used in this manual may differ from the actualviews.

6


7/89

Main Functions

This product (Tablet) is an educational tool that makes lessons using ELMO's DocumentCamera more enjoyable and easier to understand.The Tablet has several key features for teaching more effective lessons.

Drawing on the Document Camera imageBy drawing directly onto the Document Camera image, you can easily get important pointshat were difficult to explain just by image across to students.t

Operating the Document CameraOperations such as zooming with the Document Camera are simple to perform with the menu

uttons on the screen.b Free to operate from a distance

A wireless system is used to enable you to draw from wherever you want in the classroom.

7


8/89

Using as a whiteboardYou can select an image to use as the background in your lesson, such as graph paper or

musical score.

You can draw graphs or press an item stamp to position illustrations such as human figures or

fruit, helping you to create teaching materials.It is simple to retrieve created teaching materials to use in class.

Recording a lessonSeveral recording methods are available for different objectives.

Lesson recording Record both the text written on the Document Camera

image and audio.

Intermittent recording Records changes over a long time at constant intervals.

Frame recording Records only the scenes that you select for recording.

Easy, one-touch playback can be performed on recorded images. In lesson recording, boththe examples that you want to show to the students and any written text are recordedtogether, so you can show them to the students again to help with their learning.

8


9/89

Drawing on a computer screenYou can operate a computer with the Tablet.

You can use the Tablet instead of a mouse to operate a computer, or to draw directly on the

computer screen.

Drawing straight linesThe straight line pen and marker have a straight line correction function.

It automatically converts a handwritten straight line into a precise straight line.

This function is useful for drawing graphs and figures, and for underlining.

9


10/89

Supplied Items

The package of this product contains the following items. Contact your dealer if any of the

following items are not included in the package you purchased.

10

Before use

Tablet

Tweezers for replacing a core

Wireless

adapter

Pen

Battery packfor the tablet

(Lithium-ion battery)

Extra core 3 Dry cell AAAbattery

(For the pen)

USB cablefor charging

(CD-ROM) Application software

(For connecting Document Camerato computer)

RGB / USB composite cable


11/89

Part Names

Caution

Power button

Turn the Tablet ON or OFF.Press the button for 3 seconds or more to turn OFF. When the power is ON, it is lit blue.When the battery level is low, itflashes.

Tablet

USB connector Connect to your computer when chargingthe Tablet.

Status LEDIndicate the status of wireless andbattery level.

Operating area

Function keysSelect the Tablet operations. See thecorresponding sections for more details.

Tablet undersidePen slotStore the pen.

Wireless settings buttonUsed when setting communicationwith the wireless adapter.

Wireless adapter storage slotStore the wireless adapter.

Battery boxInstall the supplied battery pack.

Only open when necessary.

Wireless adapter Pen

Wireless settings button (LED) Used when setting communication

with the tablet. Eraser button

11


12/89

Caution

Preparations

Inserting and Charging the Battery Pack

Before use, insert the battery pack and check whether it is charged.

Insert the battery pack in the tablet.

Battery box lid

Battery pack

Tablet underside

Insert the supplied battery pack inthe battery box on the underside of the tablet.

Insert the battery pack in the correct direction.Only open the battery box when necessary.

Connect the computer and the tablet with the USB cable for charging.

When charging starts, the "StatusLED" in the center of the tablet is lit.

Caution

When charging is complete, the"Status LED" turns off.

Charging time: Approx. 4 hours

Disconnect the USB cable from the tablet when charging is complete.When using the Tablet, make sure that the USB cable is removed.

12


13/89

Inserting the Battery into the Pen

Insert the dry cell battery in the pen beforeuse.

Dry cell

AAA battery

Caution

Make sure that the polarity (+/-) of the dry cell battery is correct.Remove the dry cell battery if the pen will not be used for a long time.Do not recharge or short-circuit the dry cell battery.Use an AAA alkali dry cell battery. Do not use a rechargeable battery (such asNi-Cd).The supplied dry cell battery is for an initial operation check. Its operating lifeis not guaranteed.

When the dry cell battery level is low, the operability may deteriorate.

Caution

Be careful when you remove the pen cap. The dry cell battery may pop out.Replace the dry cell battery at least once a year.

13


14/89

Installing the Tablet Software (Image Mate Accent)

The Tablet software (Image Mate Accent) is used to perform operations such as the basicdrawing operations and need to be installed before you use the Tablet.

Install the Tablet software (Image Mate Accent) by following the procedure described below.The installation is required only one time for each computer when it is used with the Tablet for the first time. (This procedure is not required every time you use the Tablet.)

Installation Insert the supplied CD-ROM into the computer's CD-ROM drive. Select "Install Image Mate Accent" from the menu.

Caution

Depending on your computer, the menu may not be displayed automatically.In that case, go to My Computer on your computer and open the drive thatcontains the supplied CD-ROM. Then execute startup.exe in the Win folder.

Follow the on-screen instructions to install.

14


15/89

Depending on your computer environment, a warning message may appear aboutcompatibility with the hardware or digital signatures may appear.

In that case select "Always trust software from ELMO COMPANY, LIMITED", and press the

"Install" button.

When installation is complete, the "Image Mate Accent" icon is displayed on thedesktop.

CautionDepending on your computer, restart computer message may appear.

If the restart computer message is displayed, press the "Yes" button to restart the computer.

When the computer restarts, the "Image Mate Accent" icon is displayed on the desktop.

UninstallationTo remove the Tablet software (Image Mate Accent) from your computer, use your operatingsystem's uninstallation function.

15


16/89

Basic Tablet Operations

This section describes the basic Tablet operations, and the operation names.

Basic Pen Operations

Touch a menu button.

3. Select a menu button

Move while holdingslightly away fromthe tablet.tablet.

touching theMove while

2. Move the cursor 1. Draw

Dragging (To draw or delete)Move the pen while touching the tablet.

When or is selected, a line is drawn according to the

pen movement.

Cursor movement (To move the cursor)Move the pen while holding it slightly away from the tablet.The cursor on the screen moves according to the pen movement.

Touching (To select a menu button)Move the cursor while holding the pen slightly away from thetablet, and touch the tablet within the operating area.

CautionDo not apply excessive strength when touching the tablet with the pen.

N o t e If the pen is used at an acute angle, the pen position may not be recognized correctly. Use the pen

at a perpendicular angle as much as possible.

If the pen is not used for a while, it automatically enters the power-saving mode. To reactivate the

pen, touch the pen tip once.

16


17/89

The tablet's operating area corresponds to the entire screen.

Basic Screen Configuration

This section describes the basic configuration of the screen that is displayed when using theablet.T

Startup screen of the Tablet software (Image Mate Accent)

Drawing area This area is for displaying the Document Camera image anddrawing. The entire monitor is the drawing area.

Status display area The current operation is indicated with an icon.

Drawing menu areaYou can select the pen to use for drawing, or delete all

drawings. Menu area

These buttons are for configuration or operation of theDocument Camera.

Sub menu areaThese buttons are for using various expanded functions.These buttons vary according to the mode that is used.

N o t e

Touch in the menu area to go to the next menu.

17


18/89

ConnectionsThis section shows an example of the connection of the Tablet with other devices.

Items to prepareTablet, and supplied items Items sold separately

Tablet Wireless adapter RGB/USB composite cable

ELMO Document Camera Computer Projector RGB cable

Connect the devices as shown in the figure.

Caution

For more details about the installation and the operation of the separately sold items

such as a projector and a Document Camera, refer to the User's Guide of eachdevice.

18


19/89

Using in a LessonThis section shows how to use the Tablet in an actual lesson.

19


20/89

First, touch a function key at the top of the tablet to select the mode that you want to use.Details of the modes are described in the table below.

Mode Function key Description

Document Cameramode

For using a Document Camera in alesson.The Document Camera image isdisplayed.

Whiteboard mode For using the tablet as a whiteboardin a lesson.

A pre-prepared background isdisplayed.

Teaching material importmode

For using teaching materials in alesson.The teaching materials are pictures,videos and data that have beencreated with the Tablet software(Image Mate Accent).

A selected teaching material isdisplayed in this mode.

Quit For quitting the Tablet software(Image Mate Accent).

The modes can be changed with the function keys at the top of the tablet, or with the menubutton in the "Expert" setting. Drawn lines are retained when the mode is changed.

20


21/89

Diagram of the Tablet modes

As shown above, the Tablet basic operations (drawing, deleting and recording) are performedfor the Document Camera image in "Document Camera mode", for the background image in"Whiteboard mode", and for an already-created teaching material in "Teaching materialimport mode".You can go back to normal computer screen from any of these modes to operate thecomputer with the Tablet instead of a mouse. When the computer screen is captured, thecomputer screen is set as the background automatically and you can perform the Tabletbasic operations for it.

Background

Image of created teaching material

Screencapture

(Thumbnail display)

Teaching material selection

Teaching material import mode

Document Camera image

Computer operations

Use instead of a mouse

to operate the computer.

Whiteboard mode

Document Camera operations

image display

Document Camera

image selection

Background RecordingDeleting

Drawing

Tablet basicoperations

Document Camera mode

21


22/89

Basic Operations in Document Camera Mode

In Document Camera Mode, you can draw on the Document Camera image or record thedrawing process. Also, you can directly operate basic functions of the Document Camera,such as zoom.

Caution

Operation

Turn on the Document Camera.

In Windows XP, driver installation may start when the Document Camera isconnected for the first time.Follow the instructions on the screen to perform the installation.

22


23/89

Turn on the Tablet.

Caution

When you press the power button, the power LED is lit.* If the power LED flashes or stays off, the level of the battery pack is too low.

Charge the battery pack.

Set the Document Camera to the computer mode.

When using a notebook computer, select the external output mode.For details on the selection method, refer to the User's Guide of your notebook computer.

Click the "Image Mate Accent" icon on the computer desktop.

The Tablet software (Image Mate Accent) starts and the image from the Document Camera isdisplayed.

23


24/89

Caution

- If you cannot find icon , display All Programs in the Windows Start menu, select

ELMO Image Mate Accent, and start Image Mate Accent.exe.

- Do not change the resolution settings for the computer screen while the Tablet

software (Image Mate Accent) is starting.

After the Tablet software (Image Mate Accent) started, touch thefunction key on the tablet.

Operating the Document Camera

Operate the Document Camera by touching , and onthe right of the screen.

Zoom +/- To control the zoom level of the Document Camera.

Auto focus To focus the Document Camera automatically.

Brightness +/- To adjust the brightness of the Document Camera.

24


25/89

Drawing

Touch the desired pen icon or in the menu on the top right of the

screen.Select to draw a red line, and select to draw a black line.

The initial setting is straight line pen (red) and pencil (black).

The pen with the ruler symbol is a straight line pen that has a straight line

correction function.

This is useful for underlining, and drawing tables or graphs.

N o t e The pen types can be changed in the pen settings.

You can make more efficient use of the straight line pens straight line correction function by

selecting graph paper in whiteboard board.

Draw lines by moving the pen while touching the tablet.

See " Basic Pen Operations " for more details.

25


26/89

Drawing Straight Lines

The straight line pen and marker have a straight line correction function.It automatically converts a handwritten straight line into a precise straight line.

Underlining

Touch or .

Draw a straight line.

The line is converted into a precise straight line.

N o t e

See " Setting the Pen " for details on selecting a pen.See " Using graph paper " for details on the useful functions of the straight line pen.

26


27/89

Deleting

Partial deletionIf you only want to delete part of a drawing, align the cursor with the area

that you want to delete, and drag the pen while pressing the eraser button.

Eraser button

CautionYou cannot partially delete a line that was drawn continuously.

Delete all

To delete all the lines on a screen, touch .

27


28/89

Recording a Lesson

Recording as a picture

Display the image that you want to save as a picture.

Touch to save the picture.

Caution

For information on how to check the saved picture, see " Selecting a TeachingMaterial ".

N o t eTo display the capture button , touch at the bottom of the menu buttons and go to the

next menu.

28


29/89

Recording a video

Display the image that you want to record as video.

Touch on the right of the screen to start the recording.

Touch again to stop the recording.

N o t e

To display the lesson recording start/stop button , touch at the bottom of the menu buttons

and go to the next menu.

Caution

When the mode is changed to "Teaching material creation mode", the recording

stops. For information on how to check the recorded picture, see " Selecting a TeachingMaterial ". For details about connecting and setting the external input devices that arerequired for audio recording, refer to the User's Guide of each device.

Quitting

Touch the function key on the tablet to quit the Tablet software(Image Mate Accent).

Press the power button for 3 seconds or longer to turn OFF the Tablet.

29


30/89

Advanced Operations in Document Camera Mode

The advanced operations in Document Camera mode enable you to use functions in additionto the basic operations to give lessons that are easier to understand.

Using the Mask

The mask hides part or all of the Document Camera image that is displayed.By temporarily hiding a part that you do not want to display when asking questions or givingan explanation, your lessons will become more effective.

Touch on the bottom left.

The entire screen is masked. Move the mask by dragging it.

Caution

In one operation, you can only move the mask up or down or to the left or right.When the mouse cursor touches the edge of the screen, the movement stops. Youcan drag the mask again to move it.

To cancel the mask, touch on the bottom left again.

30


31/89

Using the Highlight

The highlight function brings attention to a part of the Document Camera image.By highlighting only the area you want to bring to attention, your lessons will become more

effective.


The highlighted area is displayed on the screen. Drag the highlightedarea to move it.

Caution

In expert mode, you can change the size of the highlighted area by dragging thearea that is not highlighted.

To cancel the highlight, touch on the bottom left again.

31


32/89

Using the Scroll

The scroll function enlarges the Document Camera image.By temporarily enlarging a small part and moving the image with the pen, your lessons will

become more effective.


An electronically magnified image is displayed on the screen. Drag theimage to move it.

To quit the scrolling, touch on the bottom left again.

32


33/89

Using Compare Pictures

Compare pictures is a function that displays the current Document Camera image together with the still image that is shot when the button is touched.

By using this function to compare the live image and the still image, your lessons will becomemore effective.

Also, you can explain the differences between two images while indicating them with the Tablet.


The still image shot by touching the button is displayed on the left, andthe current Document Camera image displayed on the right.

To cancel compare pictures, touch on the bottom left again.

33


34/89

Whiteboard Mode

Operation

In whiteboard mode, you can display one of the frequently used backgrounds that have beenrepared in advance (see the table below), and you can draw on the background.p

Touch the function key on the tablet.

Changing the Background

Touch the icon in the menu button on the right side of the screen (see the table below) toselect the background.

Menu button Mode Design

Vertical lines

Horizontal lines

Graph paper

Musical score

34


35/89

Alphabet practice

sheet

Whiteboard

Caution

To set a picture that you have prepared yourself as the background, use teachingmaterial import mode or teaching material creation mode. See " Changing thebackground " for more details.

Using graph paper When the straight line pen is used while graph paper is selected, the start point and end point of

the line are corrected to the positions of line intersections on the graph.

Touch the straight line pen icon .

35


36/89

Draw a straight line.

The line is converted into a precise straight line, and the start point andend point are corrected to the positions of line intersections on the graph.

N o t e See " Setting the Pen Writing Style " for more details on setting the straight line pen.

To change the pen type, see " Setting the Pen ".

36


37/89

Setting the Computer Images as the Background

In whiteboard mode, in addition to the backgrounds prepared in advance, you can set thecomputer images as the background.

Operating the computer

Touch to display the computer screen.

Start another application. The Pen can be used instead of a mouse.

N o t e

To display the computer button , touch at the bottom of the menu buttons and go to the

next menu.

Drawing on the computer screen

Touch to capture the current computer screen.

37


38/89

Touch and draw.

To return to the previous screen without capturing the screen, touch .

38


39/89

Teaching Material Import Mode

In teaching material import mode, you can view pictures or videos that you have recorded inadvance.

Operation


Selecting a Teaching Material

Select the picture or video that you want to view.

Image type symbol

Pictures, videos and teaching materials created in teaching material creation modecan be selected.The teaching materials are displayed in order of last updated date, but teachingmaterials set as favorite are displayed first regardless of their updated date.

A symbol displayed on the bottom of the image indicates the type of the image.

Picture symbol Indicates pictures.

39


40/89

Video symbol Indicates videos.

Teaching material creation symbol Indicates images that were created in teachingmaterial creation mode.

(Editable)

Filter

To filter the teaching materials to be displayed.

Page

If all teaching materials cannot be displayed on a singlescreen, they will be displayed in the next page(s).

InformationDisplay the updated date for the selected teachingmaterial.

Type Display the type of the selected teaching material.

FavoriteTo set the selected teaching material as favorite.Teaching materials set as favorite are displayed firston the teaching material selection screen.

Deletion screen

To go to the deletion screen.The teaching material previously selected is selected for

deletion.

Cancel

To cancel the teaching material selection and returns tothe previous mode.

Selecting a Video

In the teaching material selection screen, select a video or a teachingmaterial that contains a video.

Operate the video with the buttons displayed below.

Caution

Playback speed

To change the playback speed of the video. Theplayback speed changes each time you touch the button.

Play/pause To pause or start the video playback.

Sequence bar To change the playback position of the video.

Volume

To adjust the volume of the video that has audio.

- Only displayed if your computer has a sounddevice.

- This operation is available only at the normal

playback speed.

40


41/89

Caution

Depending on the environment or condition of your computer, the video mayplayback slowly or the reaction time for operations may be slow.Closing other applications may improve the performance.

Deleting a Teaching Material

You can delete teaching materials that you no longer need.

Touch to display the deletion screen.

Touch the teaching material that you want to delete. The selected

teaching material is highlighted and the trash can icon is displayed.

To delete multiple teaching materials, continue the selection process.

To cancel the deletion selection, touch the teaching material again.

The trash can icon disappears.

41


42/89

Touch . A confirmation message is displayed. If you want to delete the

teaching material, select "Yes".

Touch or to exit the deletion screen.

Caution

Filter

To filter the teaching materials to be displayed.

Page

If all teaching materials cannot be displayed on a single

screen, they will be displayed in the next page(s).



Delete

To delete the selected teaching material.Be very careful when deleting because the deletedteaching material cannot be restored.

If a video or picture that is being used asthe background of a teaching material isdeleted, the teaching material will not bedisplayed correctly.

Return to selection screen

To return to the teaching material selection screen.The deletion selection is canceled.

Cancel

To cancel the teaching material selection and return tothe previous mode.The deletion selection is canceled.

42


43/89

Caution

When you select a teaching material in the deletion screen, the deletion selection is

maintained even when the teaching material is hidden after you move to a different

page or apply the filter.

This teaching material is deleted when you click .

The teaching materials displayed in BACKGROUND SELECT of teaching material

import mode and teaching material creation mode are the same as those displayed with

"Open" in teaching material creation mode.

When data is deleted in any of these modes, it is deleted from all the selection screens.

Teaching materials that cannot be deletedTo protect the data, the following teaching materials cannot be deleted.

A symbol is added to teaching materials that cannot be deleted.

Teaching materials already registered in the initial setting

Teaching materials currently being created

Teaching materials set as favorites

Teaching materials already

registered in the initial setting

Teaching materials set

as favorites

Teaching materials currently being created

43


44/89

Menu List

The displayed buttons vary depending on the mode.

Also, when "Expert" is set, menu items appear that are not normally displayed.

Expert settingWhen expert is selected with the "Expert" setting in "Settings", the operations change asdescribed below.

The number of menu items displayed in each mode increases.The highlight range of the highlight function can be changed.

Mastering these functions will enable more flexible operations.

Document Camera Mode

Menu buttons

Pen 1

To select pen 1.

The initial setting is a red straight line pen. You can change

the settings for this pen in "Pen Settings".

Pen 2

To select pen 2.

The initial setting is a black pencil. You can change the

settings for this pen in "Pen Settings".

Delete allTo delete all the lines that are drawn on the screen.If you only want to delete part of a drawing, align the cursor

with the area that you want to delete, and touch the tablet

while pressing the pen's eraser button. See " Partial deletion ".

Pen settings

To display the settings for pen 1 and pen 2.

See " Setting the Pen " for more details.

Zoom +/- The zoom control function for the Document Camera.

Auto focus The auto focus function for the Document Camera.

Brightness +/- The brightness control function for the Document Camera.

Computer operations

To operate the computer.

On the computer screen, touch to change to " Whiteboard

Mode " with the captured computer image as the background.

Touch to return to the Tablet software (Image Mate

Accent) screen.

44


45/89

Start/stop lesson recording

To save the currently displayed contents and the audio that is

input to the computer as a video.

Elements such as the Document Camera image that is

displayed on the background, the background image and the

drawn lines are recorded, but elements such as the buttonsand cursor are not recorded.

The saved videos can be played back in " Teaching

material import mode".

Capture

To save the currently displayed contents as a picture.

Elements such as the Document Camera image that is

displayed on the background, the background image and the

drawn lines are recorded, but elements such as the buttons

and cursor are not recorded.

The pictures can be displayed in " Teaching material

import mode".

Settings To configure the Pen and Tablet.

Quit

To quit the Tablet software (Image Mate Accent).

Next menu

Displayed when the whole menu cannot be displayed on one

screen. Use this button to go to the next menu.

When the final menu is displayed, touch this button to returnto the first menu.

Stop screen

To pause or unpause the Document Camera image.

Undo

To redo the last editing operation (such as drawing with the

pen or deleting with the eraser). There is a limit on the number

of operations that can be undone.

Select To select a drawn line to move it or change its size.

Stamp

To insert stamps.You can also add stamps.

See " Adding a Stamp " for more details.

Document Camera mode To go to Document Camera mode.

Whiteboard mode To go to whiteboard mode.

Teaching material import mode To go to teaching material import mode.

Teaching material creation mode To go to teaching material creation mode.

45


46/89

The shaded items are available in expert mode.See " Expert setting " for more details.

Sub menu buttons

Caution

Mask

To hide part or all of the Document Camera image that isdisplayed.You can move the masked by dragging it.In one operation, you can only move the mask up or down or to the left or right. When the mask touches theedge of the screen, the movement stops. You can dragthe mask again to move it.

Highlight

To bring attention to a part of the Document Cameraimage.You can move the highlighted area by dragging it.In expert mode, you can change the size of thehighlighted area by dragging the area that is nothighlighted.

Scroll

To perform electronic magnification of the DocumentCamera image.Use it to enlarge the area that is too small.

This is different from the zoom function of the Document Camera.

Compare pictures

To display the current Document Camera image together with the still image that is shot when the button istouched. The still image is displayed on the left of thescreen and the current Document Camera image isdisplayed on the right.Use it to compare the still image and the live image.You can explain the differences between two images while

indicating them with the Tablet.

46


47/89

Whiteboard Mode

Menu buttons

Pen 1

To select pen 1.

The initial setting is a red straight line pen. You can changethe settings for this pen in "Pen Settings".

Pen 2

To select pen 2.The initial setting is a black pencil. You can change the


Delete all

To delete all the lines that are drawn on the screen.If you only want to delete part of a drawing, align thecursor with the area that you want to delete, and touchthe tablet while pressing the pen's eraser button.

See " Partial deletion ".

Pen settings

To display the settings for pen 1 and pen 2.See " Setting the Pen " for more details.

Vertical line background

To set vertical lines as the background.

Horizontal line background

To set horizontal lines as the background.

Graph paper background

To set graph paper as the background.

Musical score background

To set musical score as the background.

Alphabet practice sheet background To set an alphabet practice sheet as the background.

Whiteboard background

To set a whiteboard as the background.

Computer operations

To operate the computer.On the computer screen, touch to set the capturedcomputer image as the background.Touch to return to the Tablet software (Image Mate

Accent) screen.


To save the currently displayed contents and the audiothat is input to the computer as a video.Elements such as the Document Camera image that isdisplayed on the background, the background imageand the drawn lines are recorded, but elements such asthe buttons and cursor are not recorded.

The saved videos can be played back in " Teachingmaterial import mode".

47


48/89

Capture

To save the currently displayed contents as a picture.Elements such as the Document Camera image that isdisplayed on the background, the background imageand the drawn lines are recorded, but elements such as

the buttons and cursor are not recorded.The pictures can be displayed in " Teaching material

import mode".


Quit


Next menu

Displayed when the whole menu cannot be displayed onone screen. Use this button to go to the next menu.When the final menu is displayed, touch this button toreturn to the first menu.

Undo

To redo the last editing operation (such as drawing withthe pen or deleting with the eraser). There is a limit onthe number of operations that can be undone.

Select

To select a drawn line to move it or change its size.

Stamp

To insert stamps.You can also add stamps.See " Adding a Stamp " for more details.




To go to teaching material import mode.


The shaded items are available in expert mode.See " Expert setting " for more details.

48


49/89

Teaching Material Import Mode

Menu buttons

Pen 1

To select pen 1.

The initial setting is a red straight line pen. You can changethe settings for this pen in "Pen Settings".

Pen 2



Delete all

To delete all the lines that are drawn on the screen.If you only want to delete part of a drawing, align thecursor with the area that you want to delete, and touchthe tablet while pressing the pen's eraser button.

See " Partial deletion ".Pen settings


Computer operations

To operate the computer.

On the computer screen, touch to change to

"Whiteboard Mode " with the captured computer image

as the background.

Touch to return to the Tablet software (Image Mate

Accent) screen.


To save the currently displayed contents and the audiothat is input to the computer as a video.Elements such as the Document Camera image that isdisplayed on the background, the background imageand the drawn lines are recorded, but elements such asthe buttons and cursor are not recorded.The saved videos can be played back in " Teaching

material import mode".

Capture

To save the currently displayed contents as a picture.Elements such as the Document Camera image that isdisplayed on the background, the background imageand the drawn lines are recorded, but elements such asthe buttons and cursor are not recorded.The pictures can be displayed in " Teaching material

import mode".


Quit


49


50/89

Next menu

Displayed when the whole menu cannot be displayed on onescreen. Use this button to go to the next menu.When the final menu is displayed, touch this button to returnto the first menu.

Undo

To redo the last editing operation (such as drawing with the

pen or deleting with the eraser). There is a limit on the number of operations that can be undone.

Select To select a drawn line to move it or change its size.

Stamp

To insert stamps.You can also add stamps.See " Adding a Stamp " for more details.



Teaching material import mode To go to teaching material import mode.


The shaded items are available in expert mode.See " Expert setting " for more details. Sub menu buttons

Caution

Mask

To hide part or all of the Document Camera image that isdisplayed.You can move the masked by dragging it.In one operation, you can only move the mask up or down or tothe left or right. When the mask touches the edge of the screen,the movement stops. You can drag the mask again to move it.

Highlight

To bring attention to a part of the Document Camera image.

You can move the highlighted area by dragging it.In expert mode, you can change the size of the highlightedarea by dragging the area that is not highlighted.

Scroll

To perform electronic magnification of the Document Camera image.Use it to enlarge the area that is too small.

This is different from the zoom function of theDocument Camera.

Compare pictures

To display the current Document Camera image together withthe still image that is shot when the button is touched. The stillimage is displayed on the left of the screen and the currentDocument Camera image is displayed on the right.Use it to compare the still image and the live image.

You can explain the differences between two images while

indicating them the Tablet.

50


51/89

Function List

The functions available in each mode are shown below. Can always be used.

Cannot be used. May not be possible to use depending on the expert setting, the connection status

of the Document Camera, and the operation status of the Document Camera.

Button nameDocument

Camera mode

Whiteboard

mode

Teaching

material import

mode

Pen 1 Pen 2

Delete all Pen settings

Zoom +/- Auto focus

Brightness +/- Start/stop lesson recording

Capture Vertical lines, horizontal lines, graph paper,

musical score, alphabet practice sheet,whiteboard background

Settings Quit

Next menu Computer operations

Stamp Undo

Select

Stop/restart screen

Enter text

Edit drawing


Whiteboard mode


Teaching material creation mode

Mask

Highlight

Scroll

Compare pictures

Playback speed

Play/pause

Change volume

51


52/89

Creating Teaching MaterialsThis section describes how to create teaching materials to use in a lesson.

52


53/89

This section describes the teaching material creation mode.First, touch a function key at the top of the tablet to create a teaching material to use in alesson.


Teaching material

creation mode

To create teaching materials to use

in a lesson.You can create teaching materialsusing resources such as DocumentCamera images, pictures, stampsand videos.

Quit To quit the Tablet software (ImageMate Accent).

The modes can be changed with the function keys at the top of the tablet, or with the menu

button in the "Expert" setting. Drawn lines are retained when the mode is changed.

Teaching Material Creation Mode

If you create an example video or prepare an accurate drawing before a lesson in teachingmaterial creation mode, it will help you to make your class run smoothly.Teaching materials created in teaching material creation mode can be edited after they aresaved.

Caution

Be careful, because if you create a new teaching material, open a teaching material,

or change the mode, a teaching material that has not been saved will be lost.

Operation


53


54/89

Creating a Teaching Material with the Document Camera

Creating a teaching material with pictures

Touch on the right of the screen to display the Document Cameraremote control.(The remote control is not displayed if the Document Camera is notconnected.)

Operate the Document Camera by touching (zoom +/-), (autofocus), or (brightness +/-) on the Document Camera remotecontrol.

You can insert a picture, text or a stamp image on the Document Cameraimage.

* See the corresponding items on the subsequent pages for details on inserting pictures, textand stamp images.

54


55/89

Creating a teaching material with videos

Touch and configure the record settings.

The following types of recording are available for creating a Document Camera video.The details of the recording differ depending on the mode or application, so select atype that is suitable for your objective.

Name DescriptionNormal recording To record the image of the Document Camera in normal video.

Intermittent recording

To record the image of the Document Camera at the interval setin "Intermittent recording time". This is suitable for recording theimage of a subject that changes over a long period of time.

Frame recording

To record the image of the Document Camera each time theframe recording button is touched. By recording a series of images of a subject which was moved slightly between frames,you can make a video that is similar to animation.

Caution

Unlike the other modes, when recording in the teaching material creation mode, onlythe image of the Document Camera is recorded in video.Elements such as the drawn lines, buttons, cursor and audio are not recorded.

55


56/89

Touch to start recording.

In frame recording, recording is performed each time is touched.

To finish recording, touch .

Caution

When the mode is changed from teaching material creation mode to another mode,the recording stops.

56


57/89

Creating a Teaching Material with a Method Other Than theDocument Camera

Changing the background

In teaching material creation mode, you can select a background from the pictures andvideos created with the Tablet software (Image Mate Accent).

Touch on the right of the screen, and select the picture or video touse as the background in the BACKGROUND SELECT screen.

Image type symbol

In the selection screen, select a picture or video.

The pictures and videos are displayed in order of last updated date, but teachingmaterials set as favorite are displayed first regardless of their updated date.

A symbol displayed on the bottom of the image indicates the type of the image.

Picture symbol Indicate pictures.

Video symbol Indicate videos.

Filter To filter the backgrounds to be displayed.

Page

If all backgrounds cannot be displayed on a singlescreen, they will be displayed in the next page(s).

Information Display the updated date for the selected background.

Type Display the type of the selected background.

Favorite

To set the selected background as favorite..

Backgrounds set as favorite are displayed first on theBACKGROUND SELECT screen.

57


58/89

Caution

Deletion screen

To go to the deletion screen.The teaching material previously selected is selected for deletion.

File selection

To select a picture or video that is saved on the

computer.

Depending on the picture type,it may notbe possible to use some of the picturesthat are saved on your computer.

Cancel

To cancel the background selection and return to theprevious mode.

The selected picture or video is displayed as the background.

Caution


58


59/89

Inserting picturesIn teaching material creation mode, you can insert pictures that are saved on your computer.

Touch on the right of the screen.

Select a picture that is saved on the computer.

Drag and drop the selected picture on the screen to insert it.

Caution

Depending on the picture type, it may not be possible to use some of the picturesthat are saved on your computer.

59


60/89

Entering text

In teaching material creation mode, you can enter text using the computer's keyboard.


Touch the screen to enable keyboard input.The entered text is displayed in the color of the pen that was selectedlast.

60


61/89

Moving and enlarging materials


Drag on the screen to select a line or picture within the range of dragging.

The selected line or picture can be moved by dragging it.

61


62/89

Modifying materials

Touch on the right of the screen to display the edit drawing screen.

In the edit drawing screen, you can change the selected line, picture or text.

Bring to front/send to back

To move the position of the selected line or picture to thefront or back of other lines or pictures. This changes thepositions of overlapping lines or pictures.

Copy/paste To copy or paste the selected line or picture. Use toduplicate the same line or picture.

Change color To change the color of the selected line or text.

Change transparencyTo change the transparency of the selected line.The transparency can only be changed when the marker pen was used for drawing.

62


63/89

Using the stamp functionThe stamp is a function that enables you to insert a pre-prepared illustration when creating ateaching material.For example, to explain basketball strategy or positions, you can easily create a teaching

material by using a basketball court stamp.


In the STAMP SELECT screen, select a stamp to use.

Group list A list of the groups in which stamps are saved.

STAMP SELECT screen Thumbnails of the stamps in the group.

Page

If all stamps cannot be displayed on a single screen,they will be displayed in the next page(s).

Cancel

To cancel the stamp selection and return to the previousmode.

63


64/89

When a stamp is selected, the STAMP SELECT screen disappears, andthe stamp image is displayed on the teaching material creation screen.

Touch the pen on the position where you want to insert the stamp imageto place it there.

N o t e You can add stamps.

See " Adding a Stamp " for more details.

File Operations

Creating a new teaching material


The teaching material currently being created is erased and a newteaching material is created.

64


65/89

Opening a teaching material


Select the teaching material to edit.

Teaching materials created in teaching material creation mode can be selected in theteaching material selection screen.The teaching materials are displayed in order of last updated date, but teaching

materials set as favorite are displayed first regardless of their updated date.

Page

If all teaching materials cannot be displayed on a singlescreen, they will be displayed in the next page(s).



Favorite

To set the selected teaching material as favorite.

Teaching materials set as favorite are displayed firston the teaching material selection screen.

65


66/89

Deletion screen

To go to the deletion screen.The teaching material previously selected is selected for deletion.

Cancel

To cancel the teaching material selection and return to

the previous mode.

Caution


Saving a teaching material


Save the teaching material that is currently being edited.

Caution

If a teaching material has been opened and edited, a save operationoverwrites the previously saved data. This means that the previous data islost.

N o t e Saved content can be edited.

66


67/89

Menu List

The menu button functions are described below.

Teaching Material Creation Mode

Menu buttons

Pen 1

To select pen 1.The initial setting is a red straight line pen. You can change

the settings for this pen in "Pen Settings".

Pen 2



Delete all

To delete all the lines that are drawn on the screen.If you only want to delete part of a drawing, align the cursor with the area that you want to delete, and touch the tabletwhile pressing the pen's eraser button. See " Partial deletion ".

Pen settings


Document Camera background

To set the Document Camera image as the background inteaching material creation mode.In teaching material creation mode, perform Document

Camera operations with the Document Camera remotecontrol.

Change background

To select a background from vertical lines, horizontal lines,graph paper, copy paper, musical score, alphabet practicesheet, whiteboard, previously recorded videos, previouslyshot pictures, and pictures that are saved on the computer.

Insert picture

To insert a picture that is saved on the computer.

Stamp

To insert stamps.

You can also add stamps.See " Adding a Stamp " for more details.

Enter text

To enter text with a keyboard.

Select

To select a drawn line, stamp or inserted picture to move it or change its size.

Computer operations

To operate the computer.On the computer screen, touch to set the capturedcomputer image as the background.

Touch to return to the Tablet software (Image Mate Accent) screen.

67


68/89

Capture

To save the currently displayed contents as a picture.Elements such as the Document Camera image that isdisplayed on the background, the background image and thedrawn lines are recorded, but elements such as the buttonsand cursor are not recorded.

The pictures can be displayed in " Teaching material

import mode".

Edit drawing

To edit lines, stamps or inserted pictures; for example, bymoving them, changing their size, or copying and pastingthem.

Undo

To redo the last editing operation (such as drawing with thepen or deleting with the eraser). There is a limit on the number of operations that can be undone.




To go to teaching material import mode.

Teaching material creation mode

To go to teaching material creation mode.


Quit To quit the Tablet software (Image Mate Accent).

Next menu

Displayed when the whole menu cannot be displayed on onescreen. Use this button to go to the next menu.When the final menu is displayed, touch this button to returnto the first menu.

Sub menu buttons

Caution

Create new To create a new teaching material.

OpenTo edit existing teaching material creation data. Whenthis button is touched, the teaching material selectionscreen is displayed. Select the data to edit.

Save

To save the teaching material creation data that isurrently being edited.c

If a teaching material has been opened

and edited, a save operation overwritesthe previously saved data. This meansthat the previous data is lost.

68


69/89

Function List

The functions available in the teaching material creation mode are shown below. Can always be used. May not be possible to use depending on the expert setting, the connection status

of the Document Camera, and the operation status of the Document Camera.

Button name Teaching material creation modePen 1

Pen 2

Delete all

Pen settings

Zoom +/-

Auto focus

Brightness +/-

Capture

Settings

Quit

Next menu

Computer operations

Document Camera background

Change background

Insert picture Stamp

Undo

Select

Stop/restart screen

Enter text

Edit drawing


Whiteboard mode

Teaching material import mode Teaching material creation mode

Playback speed

Play/pause

Change volume

Create new

Open

Save

69


70/89

Various SettingsThis section describes how to configure the settings for Tablet operations.

70


71/89

This section describes the setting mode.


Setting mode To configure the settings for Tabletoperations.You can also display the version or status of connected devices.

Quit Quit the Tablet software (ImageMate Accent).

Setting Mode

In setting mode, you can configure the settings for Tablet operations.


71


72/89

Tablet Status Display

Version displayTo display the version of the Tablet software (ImageMate Accent), the version of the Tablet, and the versionof the wireless adapter.

Electric wave strength

To display the electric wave strength of the Tablet and

wireless adapter. When the electric wave strength islow, correct operation may not be possible.

Battery level To display the battery level of the battery pack. When thebattery level is low, charge it.

Pen settings


Hide menusTo hide the menus and sub menus that are normallydisplayed. Select this check box when you want to use alarger area on the screen.

Expert mode

When expert mode is selected, the number of itemsdisplayed in the menu increases, and the highlightedarea in the highlight function can be changed.Select this check box to enter expert mode.For the items added in each operation mode, see " MenuList".

72


73/89

Setting the Pen

Touch to display the pen settings.

/ Pen 1/pen 2 To select the pen that you want to configure .

/ / /

Pencil/marker/fountain pen/ straight line pen

To select a type for the selected pen.

Pencil Draw lines with the set thickness regardless of

the pen pressure.

Marker Draw lines with the set thickness regardless of

the pen pressure.

The colors are displayed semi-transparently.

Automatically converts a handwritten line into a

straight line. (Straight line correction function)

Fountain pen Change the thickness according to the pen

pressure.Straight line

pen

Draw lines with the set thickness regardless of

the pen pressure.

Automatically converts a handwritten line into a

straight line. (Straight line correction function)

Color button

To configure the color for the selected pen.

/ / Thickness To configure the thickness for the selected pen.

Select the pen type, color and pen thickness for pen 1 or pen 2, and thentouch OK.

73


74/89

Other FunctionsThis section describes various functions related to the Tablet.

Replacing the Pen Tip

When the pen tip becomes round, replace itwith the supplied extra core.Use the supplied extra core replacementtweezers when replacing the pen tip.

Caution

When replacing the pen tip, be sureto replace it with an extra core thatwas supplied with the product.Make sure that children do not putsmall parts into their mouths.

Storing the Wireless Adapter and Pen

You can store the pen and wirelessadapter in the tablet.Store the wireless adapter with thewireless settings button on the tabletside.

Caution

The falling prevention lock is applied.

When storing the wireless adapter, make sure it is securely stored in the tablet,and be careful not to drop it while carrying it around.

Tablet underside

74


75/89

About the LEDs

The power button LED and status LED on the tablet and the wireless settings button LED on

the wireless adapter indicate the status of the devices.

Power LEDLED status Operation

Off Power is OFF.

Press the power button to turn the power ON.

LitPower is ON.

Press the power button for 3 seconds to turn the power OFF.

Flashing

The battery level of the battery pack is too low.

Charge the battery.

Status LEDLED status Operation

Off When the power is ON, communication with the wireless adapter is

being performed correctly.

High-speed flashing

(Turns ON and OFF

every 0.5 seconds)

The wireless settings button is pressed.

Flashing

(Turns ON and OFF

every 1 second)

Cannot communicate with the wireless adapter.

See " Wireless Communication Settings for the Tablet ".

Lit Charging.

Wireless settings button (LED)LED status Operation

Off The computer is not turned ON.Or when the power is ON, communication with the Tablet is being performed

correctly.

High-speed

flashingThe wireless settings button for the wireless adapter is pressed.

FlashingCannot communicate with the Tablet.

See " Wireless Communication Settings for the Tablet ".

75


76/89

Setting the Pen Writing Style

Double-click the "Image Mate Accent Driver" icon that is displayed on thetaskbar.Select "Settings and Test Drawing" in the menu.

The Image Mate Accent Driver settings and test drawing screen isdisplayed.

Menu To configure settings for drawings or perform operations.

Drawing settingsUse the eraser button to delete the entire drawing area.

Use the color buttons to change the color of the pen.

Drawing area This is a test drawing area for checking the pen touch sensitivity.

Screen adjust

To configure whether or not to forcibly restart the Tablet software (Image Mate

Accent) when the size of the computer screen is changed.When ON is set, the Tablet software is restarted when the size of the computer

screen is changed; for example, when connecting to a projector.

Applicable

distance for direct

line correction

To configure the line length at which to perform straight line correction.

When the line length reaches the set value or longer, straight line correction is

performed.

Waiting time for

direct line

correction

To configure the time until converting to a straight line.

When the elapsed time after drawing reaches the set value or longer, straight line

correction is performed.

If you start to draw again within the set time, straight line correction is not

performed.If straight line correction is performed while you are writing text, make this setting

longer.

76


77/89

Caution

DefaultTo return " Applicable distance for direct line correction" and " Waiting time

for direct line correction" to their initial values.

Pen touch

sensitivity

To configure the pen pressure sensitivity on the tablet.

The firmer you set this setting, the more pressure you will have to apply on the

surface of the tablet to draw a line.

Configure this setting firmer if the cursor movements cause unintentional drawing

or operations..

After changing the pen touch sensitivity, move the pen away

from the tablet and wait for about one second.

Close button To close the settings and test drawing screen.

N o t e The pen touch sensitivity is only displayed when the Tablet are connected.

77


78/89

Adding a Stamp

You can use Explorer to add a stamp that can be used in teaching material creation mode.For details on using the stamps, see " Using the stamp function ".

Open folders in the following order:Windows Start menu My Computer Tablet software (Image MateAccent) installation drive (C:) Program Files or Program Files (x86) ELMO Image Mate Accent stamp folder..

When adding a new group, create a new folder and add a name.The addition of the new group is applied the next time that the Tabletsoftware (Image Mate Accent) is started.

Add the stamp image data (jpg, bmp, png) by inserting it into the groupthat you want to add.

Caution

The stamp data formats that can be added are jpg, bmp and png.(Note that it may not be possible to display some files in these formats.)

78


79/89

Wireless Communication Settings for the Tablet

If the "Status LED" flashes and communication is not performed when you press the power button, use the "Wireless settings buttons" on the tablet underside and wireless adapter toperform the wireless settings.

Caution

Caution

Turn ON the tablet's power, andpress the "Wireless settings button"on the underside.

The "Status LED" flashes at highspeed.

Press the "Wireless settings button"on the wireless adapter.

The "Status LED" on the tablet turnsoff for a few seconds.

Wireless adapter Tablet underside

When the "Status LED" turns off, theTablet and wireless adapter cancommunicate, and the Tablet can beused.

Perform the wireless setting within 30 seconds of pressing the "Wirelesssettings button" on the underside of the tablet.Press the "Wireless settings button" while supporting the body of the wirelessadapter.

Communication with the wireless adapter may become unstable if the Tablet isused as follows.

There is an obstruction between the Tablet and wireless adapter.The Tablet is placed on top of a computer.

A wireless device or electronic equipment is being used nearby.The Tablet is moved quickly while being used.

Also, due to the inherent characteristics of wireless communication, thecommunication may become unstable depending on the position of the Tabletand the wireless adapter.

79


80/89

TroubleshootingIf trouble occurs or you have any queries, first check this section.If the problem persists, check your warranty and contact the dealer where you purchased theproduct.

Tablet power does not turn ONIs the battery pack inserted? Check that the battery pack is inserted correctly.

Is the battery pack charged?Refer to " Inserting and Charging the Battery Pack " andthen charge the battery.

Caution

Cannot use the Tablet / The cursor does not move

Is the wireless adapter connected to the computer?

Check that the wireless adapter is connected to thecomputer being used.

Connect the wireless adapter directly to theUSB port on the computer. It may notoperate correctly if a USB hub is used.

Is the Status LED on the tablet or the LED on the wireless adapter

flashing?

There is no communication between the Tablet andwireless adapter. See " Wireless Communication

Settings for the Tablet ".

Communication is not possible.

If a wireless device or electronic equipment is used near the product, communication between the Tablet andwireless adapter may be unstable due to interferencefrom electric waves.Do not use equipment that causes interference near theTablet.

Is the pen's dry cell batteryrunning low?

Replace with a new dry cell battery.See " Inserting the Battery into the Pen ".

Is Image Mate Accent Driver operating correctly?

The software may not have been installed correctly.Refer to " Installing the Tablet Software (Image Mate

Accent) ", uninstall the software, and then install it again.

Are the Image Mate AccentDriver settings suitable?

The tablet may not respond if the pressure sensitivity istoo low or the touch sensitivity is too high.Perform the appropriate settings.

80


81/89

Communication between the Tablet and wireless adapter is unstable

Is third-party Tablet software

installed?

If third-party Tablet software is running, it may conflict with the

operations of this ELMO Tablet.

Do not operate third-party Tablet software while using this

Tablet.

Are the Tablet and wireless

adapter in the proper condition?

Communication may become unstable because of an

obstruction between the Tablet and wireless adapter, due to the

inherent characteristics of wireless communication, or because

of the installation angles of each part.

Remove the obstruction or change the installation location.

Is a wireless device or electronic

equipment being used nearby?

A wireless device or electronic equipment may interfere with the

communication between the Tablet and wireless adapter.

Refer to " Wireless Communication Settings for the Tablet " and

then perform the wireless settings.If the condition persists, stop using the wireless device or

electronic equipment, or move to a location with no

interference.

Document Camera is not displayed correctly with the Tablet software (Image MateAccent)

Are the output video settings of the

Document Camera suitable?

Use the Document Camera while the video setting of the

Document Camera is set to [PC] (RGB IN).

Is the resolution ratio of the

Document Camera image suitable?

The Tablet software (Image Mate Accent) stores the

resolution ratio of the Document Camera image.

A suitable display can be obtained by matching the resolution

ratio of the computer screen with the resolution ratio of the

Document Camera image.

See the User's Guide of your Document Camera for more

details about the Document Camera settings.

Teaching materials are not displayed correctly with the Tablet software (Image MateAccent)

Have you deleted the video or picture that was being used as the

background?

If a teaching material is displayed that used a video or picture

that has since been deleted, the background cannot be

displayed.

Be very careful before deleting videos or pictures.

Cannot find the storage location of teaching materials created with the Tabletsoftware (Image Mate Accent) or captured images.The storage location is described on

the right.My Document My Pictures Image Mate Accent rec

81


82/89

Caution

Cannot play the audio of a teaching material with the Tablet software (Image MateAccent)

Is the video a lesson recording

video?

The video types are lesson recording, normal recording,intermittent recording and frame recording. Of these,

audio is recorded only with lesson recording. Audio isnot recorded with the other video types.

Are the audio settings suitable?

If the input volume was low during video recording or the playback volume is low, it may be difficult to hear theaudio.Set the volume to a suitable level.

Is the sound device of thecomputer set to a suitable level?

Audio recording and audio playback is not possible in acomputer environment in which a sound device is notinstalled.

Operation is not guaranteed for allcomputer environments.

82


83/89


84/89

System Requirements

The Tablet can be used in the following computer environments.

Computer model IBM PC/AT compatibleOperating system

(OS)

Microsoft Windows XP Home Edition / Professional SP2

Microsoft Windows Vista Home Basic / Home Premium /

Business / Enterprise / Ultimate SP1

Microsoft Windows 7 Starter / Home Premium /

Professional / Ultimate

CPU Intel Core 2 Duo 2 GHz equivalent or higher

Memory 2 GB or higher

Video board Board compatible with Microsoft DirectX 9.0cHard disk 1 GB or higher

Screen resolution 1024768 pixels or higher

32-bit or higher

USB USB 2.0 HI-SPEED

Compatible Document

Cameras

L-1ex

L-1zero

L-1zero r

TT-02RX

TT-02s

L-1n

P10S

P30S

P10

P100

P100N

Documents

IMA Manual Advanced Win ENG