IBM Maximo Asset Configuration Managerpublib.boulder.ibm.com/tividd/td/IMASConf/621... · iv IBM Maximo Asset Configuration Manager: ... Chapter 7: Asset Configuration Manager Database

Release 6.1

Maximo User�s Guide Addendum

IBM Maximo Asset Configuration Manager

This edition applies to version 6, release 1 of IBM Maximo Asset Configuration Manager and to all subsequent releases and modifications until otherwise indicated in new editions.

Third-Party Technology: Certain Maximo products contain technology provided under license from third parties, as noted in the following table:

Open Source: Maximo contains computer software obtained from the public domain, known as "Open Source" ownership of which is attributed as follows: Portions © 2002, Steve Souza ([email protected]). Portions © 2000-2004, Jason Hunter & Brett McLaughlin. Portions © 2004-2005, The Apache Software Foundation (http://www.apache.org/).

© Copyright International Business Machines Corporation 2007. All rights reserved.

US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

IBM Product Third-Party Information

All Products Portions © 1996-2003 Visual Mining, Inc. Visual Mining� NetCharts Server provided by Visual Mining, Inc.

IBM Maximo Portions © 1995-2004 Actuate Corporation.

Portions © 2005 BEA Systems, Inc. BEA WebLogic Server® provided by BEA Systems, Inc.

Portions © 1996-2005, i-net software GmbH. J-Integra for COM® v2.4. © 2004 Intrinsyc Software International, Inc.

Maximo Discovery MSDE Copyright © Microsoft® Corporation.

© 1998-2005 Centennial Software Limited.

IBM Maximo Asset Navigator Portions © 1993-2002 Snowbound� Software Corporation. RasterMaster� Raster imaging technology provided by Snowbound Software Corporation.

IBM Maximo Mobile Portions © 2005 DataMirror, Inc.

Portions © 2000-2005 Zaval Creative Engineering Group.

IBM Maximo Mobile SE Portions © 1996-2005 Syclo, LLC.

NoteBefore using this information and the product it supports, read the information in �Notices� on page Notices-1.

© Copyright IBM Corp. 2007 iii

About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiAudience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiRelated Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiSupport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii

Chapter 1: Asset Configuration Manager Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Chapter 2: Administration Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Organizations (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Organizations (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Chapter 3: Assets Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1Assets (CM) Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2Asset Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3View Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Assets (CM) Actions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Install/Remove > Install/Remove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Install/Remove > Non Serialized Build Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Install/Remove > Edit Offsets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Change > CM Item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Change > Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6Change > Serial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6View > CM Item Change History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6View > Registration Change History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6View > Serial Change History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6CM Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6BDI Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Logs (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7Logs (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Create Work Orders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8Enter Meter Readings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8Duplicate Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8Delete Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

New Asset Assemblies (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

New Asset Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9Sub Assembly Details Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

New Asset Assemblies (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Change New Asset Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Duplicate New Asset Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Delete New Asset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Create Meters from CM Build . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Create Sub Assemblies from CM Build . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11Create Asset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Contents

iv IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum

Chapter 4: Preventive Maintenance Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1Preventive Maintenance (CM) Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2PM Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2Frequency Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Preventive Maintenance (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3Master PM (CM) Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4Master PM Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4Frequency Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Master PM (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Chapter 5: Work Orders Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1Work Order Tracking (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Work Order Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Actuals Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Work Order Tracking (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Work Package > Create. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Work Package > Add Work Orders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4Work Package > Remove Work Orders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Deferrals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Install/Remove Asset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Chapter 6: Asset Configuration Manager Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1CM Item Master (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2CM Item Master (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Add to Item Master . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Duplicate Item. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Delete Item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Technical Records (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Technical Record Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4Build Items Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4CM Items Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5Models Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5Build Positions Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5Maintenance Plan Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6Asset Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Technical Records (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7Change Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7Create Associated PMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7Duplicate Technical Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8Delete Technical Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Models (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Model Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8Configurations Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9Build Hierarchy Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10Position Rules Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11Advanced Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

Models (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14Change Variation Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14Delete Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14

Contents v

Chapter 7: Asset Configuration Manager Database Tables and Columns . . . . . . . . . . . . . . . . . . . . 7-1ASSET Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1ASSETMETER Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1MASTERPM Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2MASTERPMMETER Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2PLUSAANBDISTATUS Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2PLUSAANTRAN Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3PLUSACACAT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3PLUSACACATSR Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3PLUSACAXMASTERPM Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4PLUSACMAPPLE Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4PLUSACMBUILD Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5PLUSACMBUILDITEM Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5PLUSACMCONFIG Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6PLUSACMFLAG Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6PLUSACMFORMULA Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6PLUSACMLABEL Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7PLUSACMMODEL Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7PLUSACMPATH Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8PLUSACMREVISION Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8PLUSACMSTEP Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9PLUSACMXCAT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9PLUSACMXCOMPUTE Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9PLUSACREW Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10PLUSADEF Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10PLUSADEFEXT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11PLUSALFCNTOFFSET Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12PLUSALFDEFERRAL Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12PLUSALFEVENT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13PLUSALFEVTOFFSET Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13PLUSALFPMACTION Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14PLUSALOGENTRY Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14PLUSALOGS Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15PLUSANASSETMETER Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15PLUSANBDIMAPPING Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-16PLUSANEWASSET Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17PLUSANEWSUB Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18PLUSANEWSUBMETER Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18PLUSASAASSETCAT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19PLUSASAASSETSN Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19PLUSASADEFERRAL Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19PLUSASAEICONFIG Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20PLUSASAEIREG Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20PLUSASANONSERIAL Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21PLUSASAONOFF Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21PLUSASAPMACTION Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22PLUSATR Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22PLUSATRASSET Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23PLUSATRASSETSTAT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23PLUSATRBUILD Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23PLUSATRBUILDITEM Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-24PLUSATRCAT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-24PLUSATREVENT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-25PLUSATRMODEL Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-25PLUSATRSTATUS Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-26PM Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-26PMMETER Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-26

vi IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum

TICKET Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-27WORKORDER Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-27

Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notices-1

© Copyright IBM Corp. 2007 vii

About This Guide

This section explains how this guide can help you to use IBM® Maximo® Asset Configuration Manager. It also provides information about other IBM Corporation resources available to you, such as additional documentation and support.

Audience

This addendum to the IBM Maximo User�s Guide is for people who use Maximo Asset Configuration Manager. This solution extends certain existing Maximo applications and also provides new Maximo applications designed specifically for Asset Configuration Manager customers.

Related Documentation

For more information about Maximo and the Asset Configuration Manager, see the following documentation. The IBM Maximo Asset Configuration Manager Installation Guide is a separate document delivered in Adobe® Systems� Portable Document Format (PDF) with the product software. Use the guide with the standard Maximo documentation set.

Document Description

IBM Maximo Asset Configuration Manager Installation Guide

Describes how to install the IBM Maximo Asset Configuration Manager

IBM Maximo Finance Manager�s Guide

Describes how IBM Maximo completes financial transactions and how to set up general ledger accounts.

IBM Maximo Installation Guide Describes how to install and configure the following software:

! Application server! IBM Maximo! Actuate®

IBM Maximo Multisite Administrator�s Guide

Describes how to configure IBM Maximo for a Multisite implementation.

IBM Maximo Online Help Provides step-by-step procedures for Maximo applications.

Support

viii IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum

Support

IBM Corporation users with a valid Annual Customer Support Plan (ACSP) can obtain product support online at Support Online: support.mro.com.

Support Online includes information about product releases, software patches, and documentation updates. To find the most current version of a document, see the Knowledge Base on this site.

IBM Maximo Reconciliation Implementation Guide

Describes how to use the IBM Maximo Reconciliation module to reconcile the two types of information that IBM Maximo maintains about information technology (IT) assets: IT asset data and deployed asset data.

IBM Maximo Report Administration and Development Guide

Describes how to use Actuate to design and administer IBM Maximo reports.

IBM Maximo System Administrator�s Guide

Describes database configuration, security, and other administrative level applications and tasks.

IBM Maximo User�s Guide Provides an overview of the Maximo end-user applications. It also describes how the IBM Maximo applications interact with each other.

IBM Maximo Workflow Implementation Guide

Provides information about how to use IBM Maximo to plan, design, build, test, implement, and manage Workflow processes.

IBM Maximo Enterprise Adapter (MEA) System Administrator's Guide

Describes how to configure and use the IBM MEA.

Document Description

http://support.mro.com

© Copyright IBM Corp. 2007 1-1

Configuration management is the specification of allowable as-designed asset assemblies (models) and as-maintained physical builds. It ensures that the actual physical build of an asset meets the requirements of an allowable configuration.

You use the IBM Maximo Asset Configuration Manager to manage the builds of such high-value, complex, and regulated assets as aircraft, submarines, missiles, and so on. IBM Maximo Asset Configuration Manager is a rules-based configuration management system. It is based on MIL-STD-1388-2B, a United States military standard that uses the Logistics Support Analysis Record (LSAR).

The Build Data Interpreter The Build Data Interpreter (BDI) is the centerpiece of the Asset Configuration Manager. The BDI provides comprehensive status derivation for aircraft and other configuration-managed assets. For example, the BDI checks the actual aircraft, position-by-position, to verify that its configuration rules are in compliance with its nominated configuration. The BDI reports the status of non-compliance assets through a dialog box in the Assets (CM) application. It also alerts users to problem assets through color-coded data in various applications.

As Of Dates Another major feature of the Asset Configuration Manager is its ability to display the structure of an asset as of a past date. This feature is in the Assets (CM) application. That application also displays maintenance, meter, installation, and removal history as of a past date.

Asset Configuration Manager Applications

The Asset Configuration Manager contains five new applications that are designed specifically for asset configuration management. Five additional enhanced, or �cloned,� Maximo applications include configuration manager-specific fields, features, and actions. The unmodified standard version of these applications remains in the product.

The following table provides a brief overview of the configuration-manager functions that you can perform in the new and cloned applications.

Asset Configuration Manager Features 1

1-2 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum

Asset Configuration Manager Features

Application Asset Configuration Manager Functions

Organizations (CM) ! Specify default label system, label width, and position code width.

! Specify if you plan to use EBNF expressions to manage linear assets.

! Specify if you plan to record offsets to meter usage.

Assets (CM) ! Define configuration-managed assets.

! View the structure of an asset as of a specific date.

! View the meter, maintenance, installation, and removal history of an asset, as of a specific date.

! Change CM item, registration, and serial numbers associated with an asset.

! View history of CM items, registrations, and serial numbers associated with an asset.

! View configuration rules for an asset.

! Install an asset to a serialized or non-serialized build position.

! Edit offsets to meter usage.

! Convert an asset to a new configuration.

! Update BDI status of an asset.

Logs (CM) ! Record trip details.

! Record problems that occurred during trips.

! Record maintenance recommendations.

! Generate work orders for recommended maintenance.

! Record crew information and certifications.

! Check crew qualifications.

! Enter meter readings.

Asset Configuration Manager Features 1-3

New Asset Assemblies (CM) ! Create virtual assets that remain separate from production data until ready for production.

! Assign and initialize meters for end items and subassemblies.

! Generate identifiers and serial numbers for subassembly components.

! Generate new production assets.

! Update existing production assets.

Preventive Maintenance (CM) ! Define PM records for configuration-managed assets.

! Specify interdependencies among PMs.

! Define warning and alert intervals.

! Specify complex due date expressions.

Master PM (CM) ! Define master PM records for configuration-managed assets.

! Specify interdependencies among master PMs.



! Create associated PM records for CM items.

Work Order Tracking (CM) ! Define CM work orders.

! Install and remove assets associated with work orders.

! Create work packages of related work orders for parent and child assets.

! Defer work orders.

! Extend deferrals to work orders.

CM Items (CM) ! Define configuration-managed (CM) items.

! Cross-reference CM items to Maximo item masters.

! Create a Maximo item master from a CM item.

! Relate preventive maintenance (PM) records to CM items.

! Identify superseding CM items.



The remaining chapters of this guide describe the tabs and actions where you perform these activities.

Technical Records (CM) ! Record requirements of technical records.

! Supersede technical records.

! Identify assets affected by technical records.

! Update compliance status of affected assets.

! Generate PMs and schedule required work.

Models (CM) ! Define the structure and build hierarchy of assets.

! Create variations and revisions of models.

! Enable and disable configuration rules for a configuration.

! Define advanced configuration rules.



The Administration module has one cloned application. This chapter provides an overview of the modified and new actions in the cloned application.

For more information about the application, see the help for the application. For more information about standard Maximo applications, see the IBM Maximo User�s Guide.

The Administration module contains the following Asset Configuration Manager-specific application:

Asset Configuration Manager Application in the Administration Module

Administration Module 2


Organizations (CM) ! Specify default label system, label width, and position code width.

! Specify if you plan to use EBNF expressions to manage linear assets.

! Specify if you plan to record offsets to meter usage.

Organizations (CM) Application


Organizations (CM) Application

You use the Organizations (CM) application to set up organizations and sites for use with Maximo.

Tabs

The Organizations (CM) application has no Asset Configuration Manager-specific tabs.

Organizations (CM) Actions

The Organizations (CM) application has the following new action:

! CM Options

You use the CM Options action to specify Asset Configuration Manager-specific settings for use by the Models (CM) application.

For more information about this action, see the Organizations (CM) help.

CM Options Dialog Box


The Assets module has two new Asset Configuration Manager-specific applications and one cloned application. This chapter describes the new applications and provides an overview of new tabs, fields, and actions in the cloned application.

For more information about these applications, see the help for the applications. For more information about standard Maximo applications, see the IBM Maximo User�s Guide.

The Assets module contains the following Asset Configuration Manager-specific applications:

Asset Configuration Manager Applications in the Assets Module

Assets Module 3


Assets (CM) ! Define configuration-managed assets.

! View the structure of an asset as of a specific date.

! View the meter, maintenance, installation, and removal history of an asset, as of a specific date.

! Change CM item, registration, and serial numbers associated with an asset.

! View history of CM items, registrations, and serial numbers associated with an asset.

! View configuration rules for an asset.

! Install an asset to a serialized or non-serialized build position.

! Edit offsets to meter usage.

! Convert an asset to a new configuration.

! Update BDI status of an asset.

Assets (CM) Application



You use the Assets (CM) application to manage the physical builds of aircraft and other complex configuration-managed assets. The Build Data Interpreter (BDI) component constantly tracks and validates changes to a build. The BDI flags components that do not comply with defined configuration rules.

Tabs

The Assets (CM) application has the following new or enhanced tabs:

! Asset! View (new)

For information about a field, place the cursor in the field and press Alt+F1.

Logs (CM) ! Record trip details.

! Record problems that occurred during trips.

! Record maintenance recommendations.

! Generate work orders for recommended maintenance.

! Record crew information and certifications.

! Generate information about crew qualifications.

! Enter meter readings.

New Asset Assemblies (CM) ! Create virtual assets that remain separate from production data until ready for production.

! Assign and initialize meters for end items and subassemblies.

! Generate identifiers and serial numbers for subassembly components.

! Generate new production assets.

! Update existing production assets.



Assets Module 3-3

Asset Tab

The Asset tab of the Assets (CM) application displays the main record for an asset. You use the Asset tab to add new records to the database and view and modify existing records.

The Asset tab has the following Asset Configuration Manager-specific fields:

! Label! Position! Position Name! CM Item! Registration! Model ! Variation! Revision

Asset Tab

View Tab

You use the View tab in the Assets (CM) application to view the structure and history of an asset, as of a specific date. In some cases, you can update the history.

The key feature of the View tab is the As Of Date field. Use this field to view the asset structure and history as of the current date or a past date.



View Tab

The View tab contains the following subtabs:

! Initial ! Direct! Summary! Incidents! Maintenance Plan! Maintenance History! Parent History ! Child History ! Position History

Initial Subtab You use the Initial subtab to add, view, modify, or delete initial (anchor) meter readings for an asset.

Direct Subtab You use the Direct subtab to add, view, modify, or delete direct meter readings for an asset. You can view the readings through a specific date.

Summary Subtab You use the Summary subtab to view initial (anchor), indirect (derived), and direct readings for meters installed on an asset. You can view the readings through a specific date.

Incidents Subtab You use the Incidents subtab to add, view, modify, or delete unplanned maintenance events that were open on a specific date. Unplanned maintenance is related to problems recorded on trip logs.

Maintenance Plan Subtab You use the Maintenance Plan subtab to view or modify planned maintenance events that were open on a specific date. Planned maintenance is related to preventive maintenance records (PMs) and technical records.

Maintenance History Subtab

You use the Maintenance History subtab to view planned and unplanned maintenance that was complete on a specific date.

Parent History Subtab You use the Parent History subtab to view, modify, or delete the history of parent assets. The subtab displays parent assets to which a selected child asset was installed or removed, through a specific date.

Child History Subtab You use the Child History subtab to view, modify, or delete the history of child assets. This subtab displays child assets installed to and removed from a selected parent asset, through a specific date. The subtab displays child assets only, not grandchild assets.


Assets Module 3-5

Position History Subtab You use the Position History subtab to view, modify, or delete assets installed to or removed from a build position, through a specific date.

Assets (CM) Actions

The Assets (CM) application has the following Asset Configuration Manager-specific actions:

! Install/Remove > Install/Remove! Install/Remove > Non Serialized Build Position! Install/Remove > Edit Offsets! Change > CM Item! Change > Registration! Change > Serial! View > CM Item Change History! View > Registration Change History! View > Serial Change History ! CM Rules! BDI Status

For more information about these actions, see the Assets (CM) help.

Install/Remove > Install/Remove

You use the Install/Remove > Install/Remove action to perform the following tasks:

! Install a child asset to a parent asset! Remove a child asset from a parent asset! Correct usage offsets for a related meter

The corresponding build position must be serialized.

Install/Remove > Non Serialized Build Position

You use the Install/Remove > Non Serialized Build Position action to perform the following tasks:

! Install an asset to a non-serialized build position! Remove an asset from a non-serialized build position

Install/Remove > Edit Offsets

You use the Install/Remove > Edit Offsets action to correct an offset to meter usage. The meter must be associated with the installation or removal of an asset in a serialized build position.

Change > CM Item

You use the Change > CM Item action to change the CM item associated with an asset. The application displays the CM item history through a date that you specify. You can add, modify, or delete rows.



Change > Registration

You use the Change > Registration action to change the registration or tail number associated with an asset. The application displays the registration history through a date that you specify. You can add, modify, or delete rows.

Change > Serial

You use the Change > Serial action to change the serial number associated with an asset. The application displays the serial number history through a date that you specify. You can add, modify, or delete rows.

View > CM Item Change History

You use the View > CM Item Change History action to display CM items associated with an asset. The application displays the CM item history through a date that you specify.

View > Registration Change History

You use the View > Registration Change History action to display registrations associated with a node on the View tab. The application displays the registration history through a date that you specify.

View > Serial Change History

You use the View > Serial Change History action to display serial numbers associated with a node on the View tab. The application displays the serial number history through a date that you specify.

CM Rules

You use the CM Rules action to view the configuration rules for a build position. This action displays the same information as the Position Rules tab on the Models (CM) application.

BDI Status

You use the BDI Status action to convert an asset to a new configuration or to update the status of an asset configuration. When you update the status of the current configuration, this action also creates any required maintenance events and build positions for the current configuration.

Logs (CM) Application

Assets Module 3-7


You use the Logs (CM) application to create and maintain trip logs. Logs include the following information:

! Trip details, such as starting and ending date, time, and location ! Problems that occurred during a trip ! Maintenance recommendations and work orders! Crew and crew certifications

Tabs

The Logs (CM) application has the following tabs:

! List! Logs

The List tab is part of most Maximo applications. For more information about this tab, see the IBM Maximo User�s Guide and the Logs (CM) help.

For information about a field, place the cursor in the field and press Alt + F1.

You use the Logs tab to add, view, modify, or delete a log or trip record. A log can include any number of trips. For each trip, you record trip details such as the date and duration of the trip, starting and ending points, and fuel consumption.

Logs Tab



The Logs tab has the following subtabs:

! Log Problems! Crew Reporting

Log Problems Subtab You use the Log Problems subtab to record problems that occurred during a trip and related maintenance recommendations and work orders.

Crew Reporting Subtab You use the Crew reporting subtab to record information about the crew of a trip, including the date and duration of certifications used by crew members.

Logs (CM) Actions

The Logs (CM) application has the following Asset Configuration Manager-specific actions:

! Create Work Orders! Enter Meter Readings! Duplicate Log! Delete Log

For more information about these actions, see the Logs (CM) help.

Create Work Orders

You use the Create Work Orders action to generate one or more work orders for problems that occurred during a trip.

Enter Meter Readings

You use the Enter Meter Readings action to report meter readings for an asset.

Duplicate Log

You use the Duplicate Log action to create a log record that is like an existing record.

Delete Log

You use the Delete Log action to delete a log.

New Asset Assemblies (CM) Application

Assets Module 3-9

New Asset Assemblies (CM) ApplicationYou use the New Asset Assemblies (CM) application to perform the following tasks:

! Generate a virtual asset from the corresponding model! Assign asset numbers and serial numbers to subassembly components ! Assign meters to the end item and its subassemblies

A new asset assembly remains separate from production assets. You generate the production asset after you review and update the generated data and confirm that the assembly is ready for production.

TabsThe New Asset Assemblies (CM) application has the following tabs:

! List! New Asset ! Sub Assembly Details

The List tab is part of most Maximo applications. For more information about this tab, see the IBM Maximo User�s Guide and the New Asset Assemblies (CM) help.


New Asset Tab

You use the New Asset tab to create, view, or modify a new asset assembly record. Use this tab to add a new production asset or create asset records for the components of an existing production asset.

New Asset Tab



Sub Assembly Details Tab

You use the Sub Assembly Details tab to create, view, modify, or delete subassembly components, meters, and initial meter readings.

Sub Assembly Details Tab

New Asset Assemblies (CM) Actions

The Assets Templates (CM) application has the following Asset Configuration Manager-specific actions:

! Change New Asset Status! Duplicate New Asset Assembly! Delete New Asset! Create Meters from CM Build ! Create Sub Assemblies from CM Build! Create Asset

For more information about these actions, see the New Asset Assemblies (CM) help.

Change New Asset Status

You use the Change New Asset Status action to change the status of a new asset assembly.

Duplicate New Asset Assembly

You use the Duplicate New Asset Assembly action to create a new asset assembly record that is like an existing record.

Delete New Asset

You use the Delete New Asset action to delete a new asset assembly.

Create Meters from CM Build

You use the Create Meters from CM Build action to generate a list of meters for a new asset assembly. The application retrieves the meter information from the corresponding model and displays the generated list in the Initial Readings table window on the New Asset tab.


Assets Module 3-11

Create Sub Assemblies from CM Build

You use the Create Sub Assemblies from CM Build action to generate subassemblies for a new asset assembly.

Create Asset

You use the Create Asset action to create a production asset or update an existing production asset. This action verifies all the data in the new asset assembly, then generates an asset record for the end item and all its components. After this action is complete, you can view the asset data in the Assets (CM) application.




The Preventive Maintenance module has two cloned applications. This chapter provides an overview of new and enhanced tabs, fields, and actions in the cloned applications.


The Preventive Maintenance module contains the following Asset Configuration Manager-specific applications:

Asset Configuration Manager Applications in the Preventive Maintenance Module

Preventive Maintenance Module 4


Preventive Maintenance (CM) ! Define PM records for configuration-managed assets.

! Specify interdependencies among PMs.



Master PM (CM) ! Define master PM records for configuration-managed assets.

! Specify interdependencies among master PMs.



! Create associated PM records for CM items.

Preventive Maintenance (CM) Application



You use the Preventive Maintenance (CM) application to add, view, and modify preventive maintenance records (PMs). PM records are templates for work orders.

Tabs

The Preventive Maintenance (CM) application has the following enhanced tabs:

! PM! Frequency

PM Tab

The PM tab has the following Asset Configuration Manager-specific fields:

! TR Publication! Action Type! Secondary PM

PM Tab


Preventive Maintenance Module 4-3

Frequency Tab

The Frequency tab has the following Asset Configuration Manager-specific fields:

! Start Date! Stop Date! State! Alert Interval! Warning Interval! [Due Date] Expression

Frequency Tab

Preventive Maintenance (CM) Actions

The Preventive Maintenance (CM) application has no new or enhanced actions.

Master PM (CM) Application



You can use the Master PM (CM) application to add, view, and modify Master PMs, which are templates for other preventive maintenance records (PMs).

Tabs

The Master PM (CM) application has the following enhanced tabs:

! Master PM! Frequency

Master PM Tab

The Master PM tab has the following Asset Configuration Manager-specific fields:

! TR Publication! Action Type! Secondary Master PM

Master PM Tab


Preventive Maintenance Module 4-5

Frequency Tab

The Frequency tab has the following Asset Configuration Manager-specific fields:

! Start Date! Stop Date! State! Alert Interval! Warning Interval! [Due Date] Expression

Frequency Tab

Master PM (CM) Actions

The Master PM (CM) application has the following new Asset Configuration Manager-specific action:

! Create Associated PMs for CM Items

You use the Create Associated PMs for CM Items action to create PMs for all assets that contain a CM item. An associated PM is a PM whose scheduling information is based on a Master PM.

For more information about this action, see the Master PM CM) help.




one

The Work Orders module has one cloned application. This chapter provides an overview of new tabs, fields, and actions in the cloned application.

For more information about the application, see the help for the application. For more information about standard Maximo applications, see the IBM Maximo User�s Guide.

The Work Orders module contains the following Asset Configuration Manager-specific application:

Asset Configuration Manager Application in the Work Orders Module

Work Orders Module 5


Work Order Tracking (CM) ! Define CM work orders.

! Install and remove assets associated with work orders.

! Create work packages of related work orders for parent and child assets.

! Defer work orders.

! Extend deferrals to work orders.

Work Order Tracking (CM) Application



You use the Work Order Tracking (CM) application to plan, review, and approve work orders for assets and locations.

Tabs

The Work Order Tracking (CM) application has the following enhanced tabs:

! Work Order! Actuals

Work Order Tab

The Work Order tab has the following Asset Configuration Manager-specific fields:

! Deferrals?! Reference! Reference ID! Model! Position! Label! CM Item! Publication! Reason for Repair! Work Accomplished! Part Failure

For information about these fields, place the cursor in the field and press Alt + F1.


Work Orders Module 5-3

Work Order Tab

Actuals Tab

The Materials subtab on the Actuals tab has the following Asset Configuration Manager-specific button:

! Install Asset

You use the Install Asset button to install an asset associated with a work order. The corresponding build position must be serialized.

Actuals Tab



Work Order Tracking (CM) ActionsThe Work Order Tracking (CM) application has the following Asset Configuration Manager-specific actions:

! Work Package > Create! Work Package > Add Work Orders! Work Package> Remove Work Orders! Deferrals! Install/Remove Asset

For more information about these actions, see the Work Order Tracking (CM) help.

Work Package > Create

You use the Work Package > Create action to bundle current due, expected due, and deferred maintenance for an asset and related child and parent assets.

Work Package > Add Work Orders

You use the Work Package > Add Work Orders action to add work orders and PMs to an existing work package.

Work Package > Remove Work Orders

You use the Work Package > Remove Work Orders action to remove a work order from a work package.

Deferrals

You use the Deferrals action to defer a work order. You can defer a work order that is not cancelled, closed, or completed.

You also use this action to extend a deferral to a work order. You can create one or more extensions. The status of the most recent extension must be Active.

Install/Remove Asset

You use the Install/Remove Asset action to install or remove an asset associated with a work order. The corresponding build position must be serialized.

You also use this action to edit an offset to meter usage.


The Asset Configuration Manager module has three new Asset Configuration Manager-specific applications. This chapter describes each new application.


The Asset Configuration Manager module contains the following applications. All these applications are specific to the Asset Configuration Manager.

Applications in the Asset Configuration Manager Module

Asset Configuration Manager Module 6

Application Asset Configuration Manager Function

CM Items (CM) ! Define configuration-managed (CM) items.

! Cross-reference CM items to Maximo item masters.

! Create a Maximo item master from a CM item.

! Relate preventive maintenance (PM) records to CM items.

! Identify superseding CM items.

Technical Records (CM) ! Record requirements of technical records.

! Supersede technical records.

! Identify assets affected by technical records.

! Update compliance status of affected assets.

! Generate PMs and schedule required work.

Models (CM) ! Define the structure and build hierarchy of assets.

! Create variations and revisions of models.

! Enable and disable configuration rules for a configuration.

! Define advanced configuration rules.

CM Item Master (CM) Application


CM Item Master (CM) Application

You use the CM Item Master (CM) application to create and maintain a catalog of configuration-managed (CM) items.

Tabs

The CM Item Master (CM) application has the following tabs:

! List! CM Item

The List tab is part of most Maximo applications. For more information about this tab, see the IBM Maximo User�s Guide and the CM Item Master (CM) help.


You use the CM Item tab to add, view, modify, or delete a configuration-managed (CM) item.

CM Item Tab

Technical Records (CM) Application

Asset Configuration Manager Module 6-3

CM Item Master (CM) Actions

The CM Item Master (CM) application has the following Asset Configuration Manager-specific actions:

! Add to Item Master! Duplicate Item! Delete Item

For more information about these actions, see the CM Item Master (CM) help.

Add to Item Master

You use the Add to Item Master action to associate a CM item with one or more assets. The CM Items (CM) application adds the part just as if you added it through the Inventory Item Master application.

Duplicate Item

You use the Duplicate CM Item action to create a CM item record that is like an existing record.

Delete Item

You use the Delete CM Item action to delete a CM item.


You use the Technical Records (CM) application to record technical records from manufacturers, vendors, regulatory agencies, and others. The application maintains the following information about a technical record:

! Identifying details! Affected assets ! PMs and job plans for implementing work requirements ! Status or method of compliance of each affected asset

Tabs

The Technical Records (CM) application has the following tabs:

! Technical Record! Build Items ! CM Items ! Models! Build Positions! Maintenance Plan! Asset Status



Technical Record Tab

You use the Technical Record tab to enter details about a technical publication or identify a superseding technical publication.

Technical Record Tab

Build Items Tab

You use the Build Items tab to enter criteria to identify build items affected by a technical record. The Build Data Interpreter (BDI) uses these criteria to identify affected assets that are associated with the build item. The application displays those models and build positions on the Models and Build Positions tabs, respectively.

Build Items Tab



CM Items Tab

You use the CM Items tab to enter criteria to identify CM items affected by a technical record. The Build Data Interpreter (BDI) uses these criteria to identify affected assets that are associated with the CM item. The application displays those models and build positions on the Models and Build Positions tabs, respectively.

CM Items Tab

Models Tab

You use the Models tab to view and update a list of models affected by a technical record. The application compiles a list of affected models based on the criteria that you enter on the Build Items tab or the CM Items tab.

Models Tab

Build Positions Tab

You use the Build Positions tab to view and update a list of build positions affected by a technical record. The application compiles a list of affected build positions based on the criteria that you enter on the Build Items tab or the CM Items tab.



Build Positions Tab

Maintenance Plan Tab

You use the Maintenance Plan tab to enter maintenance plans to correct an issue that a technical record identifies. The Build Data Interpreter (BDI) or the Create Associated PMs action generates a PM for every entry on this tab.

Maintenance Plan Tab



Asset Status Tab

You use the Asset Status tab to view the compliance status of assets affected by a technical record. You also use this tab to specify the method of compliance (MOC) for an asset that does not require maintenance.

Asset Status Tab

Technical Records (CM) Actions

The Technical Records (CM) application has the following Asset Configuration Manager-specific actions:

! Change Status! Create Associated PMs! Duplicate Technical Record! Delete Technical Record

For more information about these actions, see the Technical Records (CM) help.

Change Status

You use the Change Status action to change the status of a technical record to Active or Inactive. You cannot change a status to Superseded manually. Maximo changes the status to Superseded when you supersede a record on the Technical Record tab.

Create Associated PMs

You use the Create Associated PMs action to generate PMs immediately and to schedule the work required by a technical record. However, the Build Data Interpreter (BDI) is associated with a cron task that constantly checks for readiness to create PMs. Therefore, you probably do not need to use this action.

Models (CM) Application


Duplicate Technical Record

You use the Duplicate Technical Record action to create a technical record that is like an existing record.

Delete Technical Record

You use the Delete Technical Record action to delete a technical record. You can delete a record only if its status is Draft or Inactive.


Purpose You use the Models (CM) application to define the structure and configuration rules for a configuration-managed assembly.

Tabs

The Models (CM) application has the following tabs:

! List! Model! Configurations! Build Hierarchy! Position Rules! Advanced


Model Tab

You use the Model tab in the Models (CM) application to add, view, or modify a model. You include the following information on this tab:

! Classifications! LCN structure! Build Items ! Labels! CM items



Model Tab

Configurations Tab

You use the Configurations tab to add, view, modify, or delete a variation or a revision of a model.

Variations appear in a hierarchy tree, with non-abstract variations in bold text. Each node on the tree represents a variation of the model. The root of the tree is the base variation.

Revisions appear in the Revisions table window.



Configurations Tab

Build Hierarchy Tab

You use the Build Hierarchy tab to add, view, modify, or delete build positions in a model.

Build Hierarchy Tab



The Build Hierarchy tab has the following subtabs, which display the same information in different formats.

! Hierarchy Tree! Position List

Hierarchy Tree Subtab You use the Hierarchy Tree subtab to display and modify build positions, using a hierarchical format. Each node of the hierarchy represents a build position and displays the following information about the build position (from left to right):

! Icon that represents the build item ! Default label ! Position code ! Description ! LCN code

Position List Subtab You use the Position List subtab to display and modify build positions, using a tabular format. Each row represents a build position and displays the following information about the build position (from left to right):

! Build item ! Position ! Indicator (end item, subassembly, or installation point) ! Indenture level ! LCN code ! ALC code

You also use this subtab to perform the following tasks:

! Move build positions up or down within the level to which they belong! Delete build positions! Enter information about linear assets

Position Rules Tab

You use the Position Rules tab to enter general information about a build position and to enable and disable configuration rules.

Before you use this tab, you select a build position from either subtab on the Build Hierarchy tab. The information that displays on the Position Rules tab pertains to the revision that appears in the Revision Context field. If multiple revisions of the model exist, the application defaults to the highest active revision, if one exists.



Position Rules Tab

The Position Rules tab has the following subtabs:

! Position! Items! Maintenance Plan! Formulas! Labels

Position Subtab You use the Position subtab of the Position Rules tab to perform the following tasks:

! enter information about a build position! enable and disable configuration rules for a build position

When you enable (disable) a build position rule, the build position becomes valid (not valid) for the selected model or variation.

CM Items Subtab You use the Items subtab of the Position Rules tab to enable and disable configuration rules for a CM item. When you enable (disable) a CM item rule, the CM item becomes valid (not valid) for the selected model or variation and build position.

Maintenance Plan Subtab You use the Maintenance Plan subtab of the Position Rules tab to enable and disable configuration rules for a maintenance plan. When you enable (disable) rules for a maintenance plan, the maintenance plan becomes valid (not valid) for the selected model or variation.

Formulas Subtab You use the Formulas subtab of the Position Rules tab to add formulas to calculated meters and to enable and disable configuration rules for a formula. When you enable (disable) a formula rule, the formula becomes valid (not valid) for the selected model or variation, build position, and meter.

Labels Subtab You use the Labels subtab of the Position Rules tab to enable and disable configuration rules for a label. When you enable (disable) rules for a label, the label becomes valid (not valid) for the selected model or variation.



Additional Subtabs Every subtab on the Position Rules tab has the following subtabs:

! Sys on Sys Subtab

You use the Sys on Sys subtab to enable and disable configuration rules for a build position in a model. A hierarchy tree on the subtab displays all models associated with the selected model, including models that are a parent, grandparent, and so on.

By default all the models are selected, which means that the corresponding configuration rules are enabled for all models. To disable the rules for a model, you clear the check box that corresponds to that model.

! Configuration Subtab

You use the Configuration subtab to enable and disable configuration rules for a build position in a variation. A hierarchy tree on the subtab displays all variations for which the build position is valid.

By default all the variations are selected, which means that the corresponding configuration rules are enabled for all variations. To disable the rules for a variation, you clear the check box that corresponds to that variation.

Depending on the type of configuration rule, this subtab might display CM items and serial numbers to which the rule applies. In that case, you can enable and disable rules at the CM item and serial number level.

Advanced Tab

You use the Advanced tab to define secondary configuration rules that depend on primary rules. A primary rule is a rule that you enable or disable on the subtabs of the Position Rules tab in the Models (CM) application.

Advanced Tab



Models (CM) Actions

The Models (CM) application has the following Asset Configuration Manager-specific actions:

! Change Variation Status! Delete Model

For more information about these actions, see the Models (CM) help.

Change Variation Status

You use the Change Variation Status action to change the status of a variation.

Delete Model

You use the Delete Model action to delete a model. If no assets are associated with the model, you can delete it.


This chapter lists new Asset Configuration Manager-specific database tables and their columns. It also lists new columns in existing Maximo database tables.

ASSET Table

ASSETMETER Table

Asset Configuration Manager Database Tables and Columns

7Column Type Length

PLUSACATID INTEGER 12

PLUSACONFIGID INTEGER 12

PLUSAMODELID INTEGER 12

PLUSAREG UPPER 20

PLUSAREVISIONID INTEGER 12

Column Type Length

PLUSAANCHORCOUNT DECIMAL 15,2

PLUSAANCHORDATE DATETIME 10

PLUSAISDEFAULT YORN 1

PLUSAISESTIMATED YORN 1

MASTERPM Table


MASTERPM Table

MASTERPMMETER Table

PLUSAANBDISTATUS Table

Column Type Length

PLUSAALERTINT DECIMAL 15,2

PLUSADUEDATEEXP ALN 4000

PLUSAINTACTION UPPER 20

PLUSASTARTDATE DATETIME 10

PLUSASTOPDATE DATETIME 10

PLUSAWARNINT DECIMAL 15,2

Column Type Length



Column Type Length

ASSETID INTEGER 12

CONFIGID INTEGER 12

CURRENTCONFIG YORN 1

HOLDREVISION YORN 1

INACTIVETIME DATETIME 10

MODELID INTEGER 12

NARRATIVE ALN 4000

ORGID UPPER 8

PLUSAANBDISTATUSID INTEGER 12

REVISION INTEGER 12

SITEID UPPER 8

STATUS ALN 25

STATUSEDTIME DATETIME 10

UPDATEDTIME DATETIME 20

PLUSAANTRAN Table

Asset Configuration Manager Database Tables and Columns 7-3

PLUSAANTRAN Table

PLUSACACAT Table

PLUSACACATSR Table

Column Type Length

ASSETID INTEGER 12

ORGID UPPER 8

PLUSAANTRANID INTEGER 12

PRIORITY INTEGER 12

SITEID UPPER 8

Column Type Length

COMPANIESID INTEGER 12

DESCRIPTION ALN 4000

HASLD YORN 1

ITEM UPPER 200

ITEMID INTEGER 12

ITEMSETID UPPER 8

LANGCODE UPPER 4

PART UPPER 80

PLUSACACATID INTEGER 12

REV UPPER 20

SERIALFORMAT UPPER 15

Column Type Length

CATID INTEGER 12

ITEMSETID UPPER 8

PLUSACACATSRID INTEGER 12

SERIALUOC UPPER 20

SREXPRESSION UPPER 4000

PLUSACAXMASTERPM Table


PLUSACAXMASTERPM Table

PLUSACMAPPLE Table

Column Type Length

CATID INTEGER 12

ITEMSETID UPPER 8

MASTERPMID INTEGER 12

PLUSACAXMASTERPMID INTEGER 12

Column Type Length

APPLETYPE UPPER 6

ORGID UPPER 8

PLUSACMAPPLEID INTEGER 12

PRIMARY YORN 1

REVISION INTEGER 12

RULE UPPER 200

RULEPOSITIVE YORN 1

RX1 INTEGER 12

RX2 INTEGER 12

RX3 INTEGER 12

RY1 INTEGER 12

RY2 INTEGER 12

RY3 INTEGER 12

RY4 INTEGER 12

RY5 INTEGER 12

SECONDARYCLAUSE ALN 4000

PLUSACMBUILD Table


PLUSACMBUILD Table

PLUSACMBUILDITEM Table

Column Type Length

ALC UPPER 6

BUILDITEMID INTEGER 12

INDENTURE INTEGER 12

INDICATOR UPPER 1

LCN UPPER 60

LINEAREXPRESSION ALN 4000

MAXLINEARUNITS INTEGER 12

MAXQTY INTEGER 12

MINQTY INTEGER 12

MODELID INTEGER 12

NONSERIALIZED YORN 1

ORGID UPPER 8

PLUSACMBUILDID INTEGER 12

POSITION UPPER 20

Column Type Length

ICON ALN 60

MODELID INTEGER 12

NAME ALN 40

ORGID UPPER 8

PLUSACMBUILDITEMID INTEGER 12

PLUSACMCONFIG Table


PLUSACMCONFIG Table

PLUSACMFLAG Table

PLUSACMFORMULA Table

Column Type Length

ABSTRACT YORN 1

BASE YORN 1

BUILDID INTEGER 12

CATID INTEGER 12

COMMENTS ALN 4000

DESCRIPTION ALN 40

NHCONFIGID INTEGER 12

ORGID UPPER 8

PLUSACMCONFIGID INTEGER 12

STATUS UPPER 20

VARIATION UPPER 20

Column Type Length

BUILDID INTEGER 12

FLAG YORN 1

FLAGTYPE UPPER 20

FOREIGNENTITY UPPER 60

FOREIGNKEY UPPER 60

ORGID UPPER 8

PLUSACMFLAGID INTEGER 12

REVISION INTEGER 12

Column Type Length

FORMULA ALN 4000

NAME UPPER 20

ORGID UPPER 8

PLUSACMFORMULAID INTEGER 12

PLUSACMLABEL Table


PLUSACMLABEL Table

PLUSACMMODEL Table

Column Type Length


DEFAULTFORPOS UPPER 20

LABEL UPPER 20

LABELSYSTEM UPPER 20

ORGID UPPER 8

PLUSACMLABELID INTEGER 12

Column Type Length

CLASS UPPER 20

CODE UPPER 20

COMMENTS ALN 4000

DESCRIPTION ALN 40

HASLD YORN 1

INSTALLABLE YORN 1

LABELSYSTEM UPPER 20

LANGCODE UPPER 4

LCNSTRUCTURE UPPER 10

MODEL UPPER 20

ORGID UPPER 8

PLUSACMMODELID INTEGER 12

SERIES UPPER 20

TOPLCN UPPER 9

PLUSACMPATH Table


PLUSACMPATH Table

PLUSACMREVISION Table

Column Type Length

ACTIVE YORN 1

LENGTH INTEGER 12

MODELID INTEGER 12

ORGID UPPER 8

PLUSAPATHID INTEGER 12

Column Type Length

ACTIVEDATE DATETIME 19

AUTOUPGRADE YORN 1

AUTOUPGRADEOPTOUT YORN 1

BUILDID INTEGER 12

COMMENTS ALN 4000

DESCRIPTION UPPER 40

DRAFT YORN 1

HASLD YORN 1

INACTIVEDATE DATETIME 10

LANGCODE UPPER 4

ORGID UPPER 8

PLUSACMREVISIONID INTEGER 12

REVISION INTEGER 12

REVISIONDATE DATETIME 10

PLUSACMSTEP Table


PLUSACMSTEP Table

PLUSACMXCAT Table

PLUSACMXCOMPUTE Table

Column Type Length

BUILDID INTEGER 12

ORGID UPPER 8

PATHID INTEGER 12

PATHSTEPS ALN 4000

PLUSACMSTEPID INTEGER 12

STEP INTEGER 12

Column Type Length


CATID INTEGER 12

ISDEFAULT YORN 1

ORGID UPPER 8

PLUSACMXCATID INTEGER 12

Column Type Length

FORMULAID INTEGER 12

METERID UPPER 25

ORGID UPPER 8

PLUSACMXCOMPUTEID INTEGER 12

PLUSACREW Table


PLUSACREW Table

PLUSADEF Table

Column Type Length

ASSETNUM UPPER 12

CERTIFICATION UPPER 8

COMMENTS ALN 35

COUNT INTEGER 4

DATEUSED DATE 12

DURATION DURATION 8

LOGID UPPER 8

ORGID UPPER 8

PERSON UPPER 30

PLUSACREWID INTEGER 12

QUALIFIED YORN 1

SITEID UPPER 8

TRIPNUM UPPER 8

UTILIZATION UPPER 10

Column Type Length

ADJUST YORN 1

COMMENTS ALN 25

DURATION INTEGER 12

EXTDATE DATETIME 10

HASLD YORN 1

LANGCODE UPPER 4

ORGID UPPER 8

ORIGDATE DATETIME 10

PLUSADEFID INTEGER 12

REASON ALN 15

SITEID UPPER 8

SOURCE ALN 15

STATUS ALN 15

PLUSADEFEXT Table


PLUSADEFEXT Table

STATUSDATE DATETIME 10

TYPE ALN 15

UNIQUEID INTEGER 15

WONUM UPPER 10

Column Type Length

ADJUST YORN 1

COMMENTS ALN 25

DURATION INTEGER 12

EXTDATE DATETIME 10

EXTENSION INTEGER 12

HASLD YORN 1

LANGCODE UPPER 4

ORGID UPPER 8

ORIGDATE DATETIME 10

PLUSADEFEXTID INTEGER 12

PLUSADEFID INTEGER 12

REASON ALN 15

SITEID UPPER 8

SOURCE ALN 15

STATUS ALN 15

STATUSDATE DATETIME 10

TYPE ALN 15

UNIQUEID INTEGER 15

PLUSALFCNTOFFSET Table


PLUSALFCNTOFFSET Table

PLUSALFDEFERRAL Table

Column Type Length

COUNT DECIMAL 15,2

ISON YORN 1

METERID INTEGER 12

ONOFFID INTEGER 12

ORGID UPPER 8

PLUSALFCNTOFFSETID INTEGER 12

SITEID UPPER 8

Column Type Length

DEFERREDUNITCOUNT DECIMAL 15,5

DEFERREDUNTILTIME DATETIME 10

ORGID UPPER 8

PLUSADEFERRALID INTEGER 12

PMID INTEGER 12

REBASE YORN 1

SITEID UPPER 8

TYPE ALN 25

PLUSALFEVENT Table


PLUSALFEVENT Table

PLUSALFEVTOFFSET Table

Column Type Length

ACTIVEDATE DATETIME 10

ACTIVEDATEREVIEWED YORN 1

ASSETID INTEGER 12

FORECASTCODE UPPER 20

INACTIVECODE UPPER 20

INACTIVEDATE DATETIME 10

ORGID UPPER 8

PLUSALFEVENTID INTEGER 12

PMMETERID INTEGER 12

PMUID INTEGER 12

SITEID UPPER 8

TRID INTEGER 12

WORKORDERID INTEGER 12

Column Type Length

ACTIVATEDEAVTIVATE YORN 1

COUNT DECIMAL 15,5

ORGID UPPER 8

PLUSALFEVTOFFSETID INTEGER 12

PMID INTEGER 12

SITEID UPPER 8

PLUSALFPMACTION Table


PLUSALFPMACTION Table

PLUSALOGENTRY Table

Column Type Length

ACTIONTYPE UPPER 20

ITEMSETID UPPER 8

PLUSALFPMACTIONID INTEGER 12

PRIMARYPMID INTEGER 12

SECONDARYPMID INTEGER 12

Column Type Length

ASSETNUM UPPER 12

CALLSIGN ALN 12

COMMENTS ALN 50

DELAYCODE ALN 8

DELAYDURATION DURATION 8

DESTINATION UPPER 16

DURATION DURATION 8

ENDDATETIME DATETIME 10

FUELQTY DECIMAL 12,2

LOGID UPPER 8

MILES DECIMAL 12,2

OPERATOR UPPER 8

ORGID UPPER 8

PASSENGERS INTEGER 12

PLUSALOGENTRYID INTEGER 12

PORIGIN UPPER 16

REPORTEDBY UPPER 30

SITEID UPPER 8

STARTDATETIME DATETIME 10

TRIPDATE DATETIME 12

TRIPNUM UPPER 8

TRIPQTY DECIMAL 12,0

PLUSALOGS Table


PLUSALOGS Table

PLUSANASSETMETER Table

TRIPUNITS UPPER 8

UNITS UPPER 8

UTILIZATION UPPER 10

Column Type Length

ASSETNUM UPPER 12

HASPROBLEM YORN 1

LOGID UPPER 8

ORGID UPPER 8

PLUSALOGSID INTEGER 12

SITEID UPPER 8

Column Type Length

ANCHORCOUNT DECIMAL 15,2

ANCHORDATE DATETIME 10

COPYTOENDITEM YORN 1

FORCECOPYTOSUBS YORN 1

METERNAME UPPER 10

NEWASSETID INTEGER 12

ORGID UPPER 8

PLUSANASSETMETERID INTEGER 12

SITEID UPPER 8

Column Type Length

PLUSANBDIMAPPING Table


PLUSANBDIMAPPING Table

Column Type Length

ACTIVETIME DATETIME 10

ASSETID INTEGER 12

BUILDID INTEGER 12

CATID INTEGER 12

CONFIGID INTEGER 12

CURRENTCONFIG YORN 1

INACTIVETIME DATETIME 10

ITEM UPPER 200

LABEL ALN 20

LCN ALN 60

MAP ALN 25

MODELID INTEGER 12

NAME ALN 60

NARRATIVE ALN 4000

ORGID UPPER 8

PART ALN 64

PATHID INTEGER 12

PLUSANBDIMAPPINGID INTEGER 12

PMUID INTEGER 12

POSITION ALN 20

RUNID INTEGER 12

SEQ ALN 100

SERIAL ALN 24

SITEID UPPER 8

PLUSANEWASSET Table


PLUSANEWASSET Table

Column Type Length

ASSETCREATED YORN 1

ASSETNUM UPPER 12

ASSETPREFIX UPPER 12

ASSETSTATUS ALN 20

ASSETSUFFIX UPPER 12

BUILDID INTEGER 12

CATID INTEGER 12

CONFIGID INTEGER 12

EXISTINGASSETID INTEGER 12

LOCATION UPPER 12

ORGID UPPER 8

PLUSANEWASSETID INTEGER 12

RECEIPTDATE DATETIME 10

REG UPPER 20

SERIALNUM UPPER 15

SERIALPREFIX UPPER 12

SERIALSUFFIX UPPER 12

SITEID UPPER 8

STATUS ALN 20

STATUSDATE DATE 4

PLUSANEWSUB Table


PLUSANEWSUB Table

PLUSANEWSUBMETER Table

Column Type Length

ASSETNUM UPPER 12

BUILDID INTEGER 12

CATID INTEGER 12

NEWASSETID INTEGER 12

ORGID UPPER 8

PARENT UPPER 12

PLUSANEWSUBID INTEGER 12

SERIALNUM UPPER 15

SITEID UPPER 8

Column Type Length

ANCHORCOUNT DECIMAL 15,2

ANCHORDATE DATETIME 10

METERNAME UPPER 10

NEWSUBID INTEGER 12

ORGID UPPER 8

PLUSANEWSUBMETERID INTEGER 12

SITEID UPPER 8

PLUSASAASSETCAT Table


PLUSASAASSETCAT Table

PLUSASAASSETSN Table

PLUSASADEFERRAL Table

Column Type Length

ASSETID INTEGER 12

CATID INTEGER 12

COMMENTSTEXT ALN 4000

ORGID UPPER 8

PERSONID UPPER 30

PLUSASAASSETCATID INTEGER 12

SITEID UPPER 8

TRANSTIME DATETIME 10

Column Type Length

ASSETID INTEGER 12


ORGID UPPER 8

PERSONID UPPER 30

PLUSASAASSETSNID INTEGER 12

SERIAL UPPER 15

SITEID UPPER 8


Column Type Length

DEFERREDUNTILTIME DATETIME 10

INSTALLID INTEGER 12

PLUSADEFERRALID INTEGER 12

TYPE ALN 25

PLUSASAEICONFIG Table


PLUSASAEICONFIG Table

PLUSASAEIREG Table

Column Type Length

ASSETID INTEGER 12


CONFIGID INTEGER 12

MODELID INTEGER 12

ORGID UPPER 8

PERSONID UPPER 30

PLUSASAEICONFIGID INTEGER 12

REVISIONID INTEGER 12

SITEID UPPER 8


Column Type Length

ASSETID INTEGER 12


ORGID UPPER 8

PERSONID UPPER 30

PLUSASAEIREGID INTEGER 12

REG UPPER 20

SITEID UPPER 8


PLUSASANONSERIAL Table


PLUSASANONSERIAL Table

PLUSASAONOFF Table

Column Type Length

CATID INTEGER 12


ONOFFID INTEGER 12

ORGID UPPER 8

PERSONID UPPER 30

PLUSASANONSERIALID INTEGER 12

QUANTITY INTEGER 12

SERIAL UPPER 20

SITEID UPPER 8


WORKORDERID INTEGER 12

Column Type Length

ALC UPPER 6

ASSETID INTEGER 12

LABEL UPPER 20

LCN UPPER 60

NAME ALN 40

NONSERIALIZED YORN 1

OFFTIME DATETIME 10

ONTIME DATETIME 10

ORGID UPPER 8

PARENTASSETID INTEGER 12

PLUSASAONOFFID INTEGER 12

POSITION UPPER 20

SITEID UPPER 8

PLUSASAPMACTION Table


PLUSASAPMACTION Table

PLUSATR Table

Column Type Length

ACTIONTYPE UPPER 20

ORGID UPPER 8

PLUSASAPMACTIONID INTEGER 12

PRIMARYPMUID INTEGER 12

SECONDARYPMUID INTEGER 12

SITEID UPPER 8

Column Type Length

EFFECTIVEDATE DATE 4

HASLD YORN 1

LANGCODE UPPER 4

NARRATIVE ALN 4000

ORGID UPPER 8

PLUSATRID INTEGER 12

PUBLICATION UPPER 40

RECISIONDATE DATE 4

REQUIRED UPPER 25

STATUS ALN 20

SUPERSEDEDBY INTEGER 12

TITLE ALN 60

TYPE UPPER 25

USERKEY1 ALN 20

USERKEY2 ALN 20

USERKEY3 ALN 20

USERKEY4 ALN 20

PLUSATRASSET Table


PLUSATRASSET Table

PLUSATRASSETSTAT Table

PLUSATRBUILD Table

Column Type Length

ASSETID INTEGER 12

MOC ALN 4000

ORGID UPPER 8

PLUSATRASSETID INTEGER 12

SITEID UPPER 8

STATUS ALN 20

TRID INTEGER 12

WORKORDERID INTEGR 12

Column Type Length

CHANGEBY UPPER 30

CHANGEDATE DATETIME 10

MEMO ALN 50

ORGID UPPER 8

PLUSATRASSETID INTEGER 12

PLUSATRASSETSTATID INTEGER 12

SITEID UPPER 8

STATUS ALN 20

Column Type Length

BUILDID INTEGER 12

CATID INTEGER 12

CONFIGID INTEGER 12

ORGID UPPER 8

PLUSATRBUILDID INTEGER 12

TRID INTEGER 12

PLUSATRBUILDITEM Table


PLUSATRBUILDITEM Table

PLUSATRCAT Table

Column Type Length

AUTODEFERRALDAYS INTEGER 12


INOPERATIVEDATE DATE 4

MANDATORYDATE DATE 4

OPERATIVEDATE DATE 4

ORGID UPPER 8

PLUSATRBUILDITEMID INTEGER 12

TRID INTEGER 12

VALIDUNTILREMOVED YORN 1

Column Type Length

CATID INTEGER 12

INOPERATIVEDATE DATE 4

OPERATIVEDATE DATE 4

ORGID UPPER 8

PLUSATRCATID INTEGER 12

SREXPRESSION ALN 200

SUPERSEDINGCATID INTEGER 12

TRID INTEGER 12

UPGRADE YORN 1

VALIDUNTILREMOVED YORN 1

PLUSATREVENT Table


PLUSATREVENT Table

PLUSATRMODEL Table

Column Type Length

ASSETFROMCOUNT DECIMAL 15,2

ASSETMETERID INTEGER 12

ASSETTOCOUNT DECIMAL 15,2

COMPLYBYDATE DATE 4

COUNT DECIMAL 15,2

DUEATCOUNT YORN 1

DUEATMASTERPMID INTEGER 12

EFFECTIVEDATE DATE 4

ISINITIAL YORN 1

METERID INTEGER 12

ORGID UPPER 8

PLUSATREVENTID INTEGER 12

RECURRING YORN 1

TRID INTEGER 12

Column Type Length

MODELID INTEGER 12

ORGID UPPER 8

PLUSATRMODELID INTEGER 12

SREXPRESSION ALN 200

TRID INTEGER 12

PLUSATRSTATUS Table


PLUSATRSTATUS Table

PM Table

PMMETER Table

Column Type Length

CHANGEBY UPPER 30

CHANGEDATE DATETIME 10

MEMO ALN 50

ORGID UPPER 8


PLUSATRSTATUSID INTEGER 12

STATUS ALN 20

Column Type Length


PLUSADUEDATEEXP ALN 4000

PLUSAEVTACTIVEDATE DATETIME 10

PLUSAINTACTION UPPER 20

PLUSASTARTDATE DATETIME 10

PLUSASTOPDATE DATETIME 10



Column Type Length



TICKET Table


TICKET Table

WORKORDER Table

Column Type Length

PLUSAASSETID INTEGER 12

PLUSACATID INTEGER 12

PLUSACOMPONENT ALN 12

PLUSALOGENTRYID INTEGER 12

PLUSAMAINTRECOM ALN 12

PLUSAMECHCOMMENTS ALN 50

PLUSAOPCOMMENTS ALN 50

PLUSAPOSITION ALN 24

PLUSAPROBLEM UPPER 10

PLUSASTATUS ALN 12

PLUSATRIPNUM UPPER 8

PLUSAWONUM UPPER 10

Column Type Length

PLUSAPARTFAILURE ALN 15

PLUSAREFERENCE ALN 15

PLUSAREFERENCEID ALN 15

PLUSARFR ALN 15

PLUSAWORKACCOMP ALN 15

WORKORDER Table


© Copyright IBM Corp. 2007 Notices-1

Notices

This information was developed for products and services offered in the U.S.A.

IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service.

IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to:

IBM Director of LicensingIBM CorporationNorth Castle DriveArmonk, NY 10504-1785U.S.A.

For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to:

IBM World Trade Asia CorporationLicensing2-31 Roppongi 3-chome, Minato-kuTokyo 106-0032, Japan

The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law:

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those

Notices-2 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum

Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk.

IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact:

IBM Corporation2Z4A/10111400 Burnet RoadAustin, TX 78758 U.S.A.

Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee.

The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us.

Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.

All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only.

This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental.

If you are viewing this information softcopy, the photographs and color illustrations may not appear.

Trademarks

AIX, IBM, IBM Corporation, the IBM logo, Tivoli, and WebSphere are registered trademarks of the International Business Machines Corporation in the United States, other countries, or both.

Intel, the Intel logo, and Pentium are registered trademarks of the Intel Corporation in the United States, other countries, or both.

Microsoft, Windows, and Internet Explorer are registered trademarks of Microsoft Corporation in the United States, other countries, or both.

Notices-3

Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States, other countries, or both.

Sun, Sun Microsystems, the Sun logo, and Solaris are trademarks of Sun Microsystems, Inc.

Linux is a trademark of Linus Torvalds in the United States, other countries, or both.

UNIX is a registered trademark of The Open Group in the United States and other countries.

Other company, product, and service names may be trademarks or service marks of others.

Notices-4 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum

Documents

IBM Maximo Asset Configuration Managerpublib.boulder.ibm.com/tividd/td/IMASConf/621... · iv IBM Maximo Asset Configuration Manager: ... Chapter 7: Asset Configuration Manager Database