IBJSC.com | I-WEB.com.vn Manual 498031910

8/8/2019 IBJSC.com | I-WEB.com.vn Manual 498031910

1/94

Model SR7002/SR8002 User Guide

AV Surround Receiver


2/94

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol within an equilateral triangle isintended to alert the user to the presence of uninsulated dangerous voltagewithin the products enclosure that may be of sufficient magnitude to constitutea risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert theuser to the presence of important operating and maintenance (servicing)instructions in the literature accompanying the product.

WARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUGTO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR VITER LES CHOCS LECTRIQUES, INTRODUIRE LALAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTEDE LA PRISE ET POUSSER JUSQUAU FOND.

NOTE TO CATV SYSTEM INSTALLER:This reminder is provided to call the CATV (Cable-TV) system installers attention to Section 820-40 of theNEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shallbe connected to the grounding system of the building, as close to the point of cable entry as practical.

NOTE:

This equipment has been tested and found to complywith the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation. Thisequipment generates, uses and can radiate radiofrequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However,there is no guarantee that interference will not occurin a particular installation. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by tuning theequipment off and on, the user is encouraged to

try to correct the interference by one or more of the

following measures:- Reorient or relocate the receiving antenna.

- Increase the separation between the equipmentand receiver.

- Connect the equipment into an outlet on acircuit different from that to which the receiver isconnected.

- Consult the dealer or an experienced radio/TVtechnician for help.

NOTE:Changes or modifications not expressly approved bythe party responsible for compliance could void theusers authority to operate the equipment.

IMPORTANT SAFETYINSTRUCTIONSREAD BEFORE OPERATING EQUIPMENT

This product was designed and manufactured tomeet strict quality and safety standards. There are,however, some installation and operation precautionswhich you should be particularly aware of.

1. Read Instructio ns All the safety andoperating instructions should be read beforethe product is operated.

2. Retain Instruct io ns The safety andoperating instructions should be retained forfuture reference.

3. Heed Warnings All warnings on the productand in the operating instructions should beadhered to.

4. Follow Instructions All operating and useinstructions should be followed.

5. Cleaning Unplug this product from the

wall outlet before cleaning. Do not use liquidcleaners or aerosol cleaners. Use a dampcloth for cleaning.

6. Attachments Do not use attachments notrecommended by the product manufactureras they may cause hazards.

7. Water and Moisture Do not use this productnear water-for example, near a bath tub,wash bowl, kitchen sink, or laundry tub, in awet basement, or near a swimming pool, andthe like.

8. Accessories Do not place this product on

an unstable cart, stand, tripod, bracket, ortable. The product may fall, causing seriousinjury to a child or adult, and serious damageto the product. Use only with a cart, stand,tripod, bracket, or table recommended by themanufacturer, or sold with the product. Anymounting of the product should follow themanufacturers instructions, and should usea mounting accessory recommended by themanufacturer.

9. A product and cart combination should bemoved with care. Quick stops, excessiveforce, and uneven surfaces may cause theproduct and cart combination to overturn.

10. Ventilati on Slots and openi ngs in thecabinet are provided for ventilation and toensure reliable operation of the product andto protect it from overheating, and theseopenings must not be blocked or covered.The openings should never be blocked byplacing the product on a bed, sofa, rug, orother similar surface. This product should notbe placed in a built-in installation such as abookcase or rack unless proper ventilation isprovided or the manufacturers instructionshave been adhered to.

11. Power Sources This product should beoperated only from the type of power sourceindicated on the marking label. If you arenot sure of the type of power supply to yourhome, consult your product dealer or localpower company. For products intended tooperate from battery power, or other sources,refer to the operating instructions.

12. Grounding or Polarization This product maybe equipped with a polarized alternatingcurrent

line plug (a plug having one blade wider than

the other). This plug will fit into the power

outlet only one way. This is a safety feature. If

you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should

still fail to fit, contact your electrician to replace

your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

AC POLARIZED PLUG


3/94

13. Power-Cord Protection Power-supply cordsshould be routed so that they are not likelyto be walked on or pinched by items placedupon or against them, paying particularattention to cords at plugs, conveniencereceptacles, and the point where they exitfrom the product.

14. Protective Attachment Plug The productis equipped with an attachment plug havingoverload protection. This is a safety feature.See Instruction Manual for replacement orresetting of protective device. If replacementof the plug is required, be sure the servicetechnician has used a replacement plugspecified by the manufacturer that has thesame overload protection as the original plug.

15. Outdoor Antenna Grounding If an outsideantenna or cable system is connected to theproduct, be sure the antenna or cable systemis grounded so as to provide some protectionagainst voltage surges and built-up staticcharges. Article 810 of the National ElectricalCode, ANSI/NFPA 70, provides informationwith regard to proper grounding of the mastand supporting structure, grounding ofthe lead-in wire to an antenna-dischargeunit, size of grounding conductors, locationof antennadischarge unit, connection togrounding electrodes, and requirements forthe grounding electrode. See Figure 1.

16. Lightning For added protection for thisproduct during a lightning storm, or when it isleft unattended and unused for long periodsof time, unplug it from the wall outlet anddisconnect the antenna or cable system. Thiswill prevent damage to the product due tolightning and power-line surges.

17. Power Lines An outside antenna systemshould not be located in the vicinity of overhead

power lines or other electric light or power

circuits, or where it can fall into such power

lines or circuits. When installing an outside

antenna system, extreme care should be taken

to keep from touching such power lines or

circuits as contact with them might be fatal.

18. Overloading Do not overload wall outlets,extension cords, or integral conveniencereceptacles as this can result in a risk of fireor electric shock.

19. Object and Liquid Entry Never push objectsof any kind into this product through openingsas they may touch dangerous voltage pointsor short-out parts that could result in a fire orelectric shock. Never spill liquid of any kindon the product.

20. Servicing Do not attempt to service thisproduct yourself as opening or removingcovers may expose you to dangerous voltageor other hazards. Refer all servicing toqualified service personnel.

21. Damage Requiring Service Unplugthis product from the wall outlet and referservicing to qualified service personnel underthe following conditions:

a. When the power-supply cord or plug isdamaged.

b. If liquid has been spilled, or objects havefallen into the product.

c. If the product has been exposed to rain orwater.

d. If the product does not operate normally byfollowing the operating instructions. Adjustonly those controls that are covered bythe operating instructions as an improperadjustment of other controls may result indamage and will often require extensivework by a qualified technician to restore theproduct to its normal operation.

e. If the product has been dropped or damagedin any way, and

f. When the product exhibits a distinct changein performance this indicates a need forservice.

22. Replacement Parts When replacementparts are required, be sure the servicetechnician has used replacement partsspecified by the manufacturer or have thesame characteristics as the original part.Unauthorized substitutions may result in fire,electric shock, or other hazards.

23. Safety Check Upon completion of anyservice or repairs to this product, ask theservice technician to perform safety checksto determine that the product is in properoperating condition.

24. Wall or Ceiling Mounti ng The productshould be mounted to a wall or ceiling only asrecommended by the manufacturer.

25. Heat The product should be situated awayfrom heat sources such as radiators, heatregisters, stoves, or other products (includingamplifiers) that produce heat.

FIGURE 1

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

This Class B digital apparatus complies with Canadian

ICES-003.

Cet appareil numrique de la Classe B est conforme

la norme NMB-003 du Canada.

NEC - NATIONAL ELECTRICAL CODE

ANTENNALEAD IN WIRE

GROUNDCLAMP

ANTENNADISCHARGE UNIT(NEC SECTION 810-20)

GROUNDING CONDUCTORS(NEC SECTION 810-21)

ELECTRICSERVICEEQUIPMENT

GROUND CLAMPSPOWER SERVICE GROUNDING

ELECTRODE SYSTEM(NEC ART 250, PART H)

DECLARATION OF CONFORMITY

U.S. Responsible Party: Marantz America, Inc.

100 Corporate Drive,

Mahwah, NJ, 07430, U.S.A.

TEL: 201-762-6500

Type of Product:

Model:

AV Surround Receiver

SR7002/8002

This device complies with Part 15 of the FCC rules. Operation is subject to the

following conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

AV_060908U1


4/94

ENGLISH

1

INTRODUCTIONThank you for purchasing the Marantz SR7002/SR8002 Surround receiver.This remarkable component has been engineered to provide you with many years of home theater enjoyment.Please take a few minutes to read this manual thoroughly before you connect and operate the SR7002/SR8002.As there are a number of connection and configuration options, you are encouraged to discuss your ownparticular home theater setup with your Marantz A/V specialist dealer.

ACCESSORIES CHECK

Before use, check the below accessories wereincluded in the package.

Remote Controller RC8001SR

2 31

5 64

8

0

97

MEMOCLEAR

DSS

AMPAUX2AUX1TAPE

TUNER CD CD-R MD

VCRDVDTV

SOURCE

OFF ON/OFF

POWERON

D4

D5

D2

M

D1

D3

D5

OK

VOLCH

PREV MUTE

MENU EXIT

GUIDE

T E ST C H . SE L

LIP.SYNC

SURR

7.1CH ATT SPK-AB

DISP OSD

THX

SLEEP

1 2

LIGHT

Learning Remote ControllerRC8001SR

Remote Controller For Multiroom RC101

AAA-size batteries 5

Microphone

AM Loop Antenna

FM Antenna (For SR7002)

FM Feeder Antenna (For SR8002)

FM Antenna converter (Only SR8002)

AC power cable

Front AUX Jack Cover

PUSHPUSH

User Guide

Warranty CardUSA 1Canada 1


5/94

ENGLISH

2

TABLE OF CONTENTSCONNECTING THE ANTENNA TERMINALS .................36

XM RADIO OVERVIEW ...................................................37

CONNECTING THE XM CONNECT-AND-PLAY

ANTENNA .........................................................................37

CONNECTING FOR THE MULTI ROOM ........................38

CONNECTING OTHER EQUIPMENT .............................39

SETUP ..................................................40

ONSCREEN DISPLAY MENU SYSTEM .........................40

1 INPUT SETUP .............................................................42

2 SPKR (SPEAKER) SETUP ................. .................. .......45

ERROR MESSAGES .......................................................48

3 SURROUND SETUP ................. .................. ................ 51

4 VIDEO SETUP ............... .................. ................. ...........53

5 PREFERENCE ............................................................54

6 ACOUSTIC EQ ................. .................. ................. ........56

BASIC OPERATION (PLAY BACK)..58SELECTING AN INPUT SOURCE ...................................58

SELECTING THE SURROUND MODE ...........................58

DIALOGUE NORMALIZATION MESSAGE .....................58

NIGHT MODE ...................................................................58

ADJUSTING THE MAIN VOLUME ..................................58

ADJUSTING THE TONE (BASS & TREBLE) CONTROL59

TEMPORARILY TURNING OFF THE SOUND ....... ..........59

USING THE SLEEP TIMER .............................................59

M-DAX (MARANTZ DYNAMIC AUDIO EXPANDER) ......59

VIDEO CONVERT ............................................................59

I/P CONVERT ...................................................................60

SURROUND MODE .............................60

OTHER FUNCTION ..............................64

DISPLAY MODE ...............................................................64

RECORDING AN ANALOG SOURCE .............................64

SELECTING ANALOG AUDIO INPUT OR DIGITAL AUDIO

INPUT ..............................................................................64

LISTENING THROUGH HEADPHONES .........................64

DOLBY HEADPHONE MODE ..........................................65

ATTENUATION TO ANALOG INPUT SIGNAL ................65

SPEAKER A/B ..................................................................65

7.1 CH INPUT ...................................................................65

INTRODUCTION ....................................1

ACCESSORIES CHECK ....................................................1

TABLE OF CONTENTS .........................2

FEATURES .............................................2

DESCRIPTION ...................................................................3

BEFORE USE ................ ................. ........6

OPERATION OF REMOTE CONTROLLER ......................7

NAMES AND FUNCTION ......................8

FRONT PANEL ...................................................................8

FL DISPLAY AND INDICATER ...........................................9

REAR PANEL .......................................10

REMOTE CONTROL OPERATION

(RC8001SR) ....................................11

NAME AND FUNCTION ...................................................11

LCD INDICATORS (RC8001SR)......................................12

SETTING THE TIME ........................................................13

GENERAL INFORMATION OF RC8001SR TO THE UNIT..13CONTROLLING MARANTZ COMPONENTS .................14

BASIC OPERATION .........................................................17

PROGRAMMING MACROS ............................................20

CLONE MODE .................. ................. .................. .............22

SETUP ..............................................................................23

RENOTE CONTROL OPERATION (RC101)..24

NAME AND FUNCTION ...................................................24

GENERAL INFORMATION OF RC101 TO THE UNIT ....25

CONTROLLING MARANTZ COMPONENTS .................25

BASIC OPERATION .........................................................28

OTHER OPERATIONS ....................................................30

CONNECTIONS ...................................31

SPEAKER PLACEMENT .................................................31

CONNECTING SPEAKERS ................. .................. ..........31

CONNECTING AUDIO COMPONENTS..........................32

CONNECTING VIDEO COMPONENTS..........................33

CONNECTING HDMI COMPONENTS ............................34

ADVANCED CONNECTING ............................................35

CONNECTING THE REMOTE CONTROL JACKS .........35

AUX2 INPUT .....................................................................66

VIDEO ON/OFF ................................................................66

TV AUTO ON/OFF FUNCTION ........................................66

LIP.SYNC ..........................................................................66

DUAL BACKUP MEMORY ...............................................66

BASIC OPERATION (TUNER)......... 67LISTENING TO THE TUNER ...........................................67

PRESET MEMORY ..........................................................68

LISTENING TO THE HD RADIO STATIONS

(SR8002 ONLY) ................................................................70

RBDS OPERATION (SR8002 ONLY) ..............................73

LISTENING TO XM SATELLITE RADIO..........................74

SEARCH MODE ...............................................................75

PRESET MEMORY ..........................................................76

MULTI ROOM SYSTEM .......................78

MULTI ROOM PLAYBACK USING THE MULTI ROOM

OUT TERMINALS.............................................................78

MULTI ROOM PLAYBACK USING THE MULTI SPEAKER

TERMINALS .....................................................................78

OPERATION OF THE MULTI ROOM OUTPUTS WITH

THE REMOTE CONTROL FROM MULTI A.....................79

TROUBLESHOOTING .........................80

HDMI .................................................................................81

XM SATELLITE RADIO ....................................................81

TECHNICAL SPECIFICATIONS ..........82

FEATURESThis unit incorporates the latest generation of digitalsurround sound decoding technology such as DolbyDigital EX, Dolby Digital, DTS ES (Discrete 6.1 andMatrix 6.1), DTS Neo:6 (Cinema, Music), Dolby Pro-Logic II (Movie, Music and Game), Dolby Pro-LogicIIx (Movie, Music and Game), Circle Surround II(Cinema, Music and Mono).Additionally, the unit is compatible with Dolby TrueHDand DTS-HD (as used for Blu-ray and HD DVD discs)

as well as Dolby Digital Plus, an expanded andimproved version of Dolby Digital positioned as thenext-generation delivery format. These audio formatscan be sent with video signals via an HDMI cable toHDMI 1.3a-compatible equipment.In addition, Marantz has focused on the future. Byutilizing pre-out jacks, 7.1 direct inputs and a RS-232Ccommunication port, the unit is tomorrows technology,today!

THX Select 2 certified7ch amplifiers have enough power for even the mostdifficult conditions found in large rooms.Enormous power reserves endow the system withsubstantial dynamic ability at high sound levels.110 watts (SR7002) / 125 watts (SR8002) to each ofthe 7 main channels the power amp section featuresan advanced, premium high-storage power supplycapacitors, and fully discrete output stages housedin cast aluminum heat sinks .

This unit incorporates the most advanced DigitalSignal Processing circuitry, along with a 192 kHz/24 bitD/A converter in each of the 7 channels. Independentpower supply circuits are incorporated for the FLdisplay, audio and video sections for maximumseparation, clarity and dynamic range. Together withhand-selected customized components, all elementswork in harmony to recreate the emotion, exactly asthe artist had intended.

This unit is designed and engineered with extensivefeedback from custom installation experts, dealersand consumers. It features multi-room/multisource,assignable DC trigger, a RS-232C communicationport, Flasher input, heavy duty speaker binding postsand an extensive array of both analog and digitalinputs / outputs. With 6 assignable digital inputs (7total), 4 component inputs, Super Audio CD MultiChannel (7.1 channel) direct inputs, video convertsystem and a speaker-B and OSD output versatilityis taken to a stunning new level. Furthermore, theunit can output the OSD information through the Y/C(S-video) and composite video outputs.


6/94

ENGLISH

3

An easy-to-use programmable, learning remotecontroller allows full access to all of the operatingfunctions and can be used for system operation aswell.

The new generation of Marantz Receivers is stylish andcompletely symmetrical. On the front panel of the unit,buttons are kept to a minimum. Source selectors andvolume controls are intuitively placed.This unit is here to perform in your unrivaled homeentertainment setup.

HDMIHDMI (High-Definition Multimedia Interface) is anenhancement to the DVI (Digital Visual Interface)standard. It adds capabilities for digitally transmittingaudio signals in addition to video signals. Wheremultiple cables were previously needed for audio/video, HDMI enables audio/video connection via asingle cable.The HDMI input jacks of this unit support HDMI Ver.1.3a. and the HDMI output jacks of this transmittersupport HDMI Ver. 1.3a.

Copyright ProtectionThis unit supports HDCP (High-bandwidth DigitalContent Protection). HDCP is copyright protectiontechnology that consists of data encoding and other

device authentication. Its purpose is to protect digitalvideo content. Both this unit and the connectedcomponent (such as a video player or monitor) mustsupport HDCP. Before connecting a component tothis unit, refer to its instruction manual.

xvYCC Deep Color 36bit THX / THX Surround EX Dolby True HD, Dolby Digital Plus dts HD Dolby Digital EX, Dolby Digital, DTS ES

(Discrete 6.1, Matrix 6.1, Neo:6) Dolby Headphone Dolby Pro Logic II(Movie, Music, Game) Dolby Pro Logic IIx (Movie, Music, Game)

Circle Surround II(Cinema, Music, Mono) HDCD

Bi-amp drive Source/Pure Direct mode 9 bands x 7 ch GEQ DSD to PCM converter

Audyssey Mult EQ XM Satellite Radio Ready XMHD Surround Powered by Neural Audio HD Radio (SR8002 Only) Improved Station Name Input Method, 60 Presets

Auto Adjust Function for Speaker Distance Settings(Delay Time)

M-DAX (Marantz Dynamic Audio eXpander) Assignable DC Trigger Output Assignable Video Input Auto Lipsync (Audio Delay)

7 110 Watts (8 Ohms), Discrete Amplifiers(SR8002: 7 125 Watts)

High Power Current Feedback Circuitry Massive Energy Power Supply, Huge EI

Transformer, Large ELCOs. (SR7002 only) Troidal Core Transformer (SR8002 only)

Function Rename 192 kHz/24 bit DAC for all 8 Channels 32 bit Digital Surround Processing Chipsets Large Heavy Duty Speaker Terminals for all

Channels Auto Input Signal Detection Front Optical AUX Input

(Digital Camera, Portable DVD) Multi Room B output (SR8002 only)

Video Off Mode Set Up Menu via all Video Output

(Composite, S-Video, Component video andHDMI)

Video convert systemHDMI Component Video

S-Video

Composit Video Two component monitor outputs Video I/P Converter Selectable Multi Room Component Video output

(SR8002 only)

RS-232C Terminal for Future Upgrade or SystemControl

Emitter Output (SR8002 only) Programmable, learning remote controller Flasher Input IR Recever Input (SR8002 only)

DESCRIPTION

THXis an exclusive set of standards and technologiesestablished by the world-renowned film production

company, Lucasfilm Ltd. THX resulted from GeorgeLucas desire to reproduce the movie soundtrack asfaithfully as possible both in the movie theater and inthe home theater.THX engineers developed patented technologies toaccurately translate the sound from a movie theaterenvironment into the home, correcting the tonal andspatial errors that occur.When the THX mode of the unit is on, three distinctTHX technologies are automatically added:Re-Equalization-restores the correct tonal balancefor watching a movie in a home environment.These sounds are otherwise mixed to be brighterfor a large movie theater. Re-EQ compensates forthis and prevents the soundtracks from being overlybright and harsh when played in a home theater.Timbre Matching-filters the information going to thesurround speakers so they more closely match thetonal characteristics of the sound coming from thefront speakers.This ensures seamless panning between the frontand surround speakers.Adaptive Decorrelation-slightly changes one surroundchannels time and phase relationship with respect tothe other surround channel.This expands the listening position and creates withonly two surround speakers the same spacioussurround experience as in a movie theater withmultiple surround speakers.

The unit was required to pass a rigorous seriesof quality and performance tests, in addition toincorporating the technologies explained above, inorder to be THX certified.THX requirements cover every aspect of performanceincluding pre-amplifier and power amplifierperformance and operation, and hundreds of otherparameters in both the digital and analog domain.Movies which have been encoded in Dolby Digital,DTS, Dolby Pro Logic, stereo and Mono will allbenefit from the THX mode when being viewed.The THX mode should only be activated when

watching movies which were originally produced fora movie theater environment.THX need not be activated for music, moviesmade especially for TV, or shows such as sportsprogramming, talk shows, etc.This is because they were originally mixed for a smallroom environment.

THX and Select 2 are trademarks of THX Ltd. THXmay be registered in some jurisdictions. SurroundEX is a trademark of Dolby Laboratories. Used withpermission.

THX Surround EXDolby DIgital Surround EX is ajoint development of Dolby Laboratories and THX Ltd.

In a movie theater, film soundtracks that have beenencoded with Dolby Digital Surround EX technologyare able to reproduce an extra channel which hasbeen added during the mixing of the program. Thischannel, called Surround Back, places soundsbehind the listener in addition to the currentlyavailable front left, front center, front right, surroundright, surround left and subwoofer channels. Thisadditional channel provides the opportunity for moredetailed imaging behind the listener and brings moredepth, spacious ambience and sound localizationthan ever before.

Movies that were created using the Dolby DigitalSurround EX technology, when released into thehome consumer market may exhibit wording to thateffect on the packaging. A list of movies createdusing this technology can be found on the Dolbyweb site at www.dolby.com. A list of available DVDsoftware titles encoded with this technology an befound at www.thx.com.


7/94

ENGLISH

4

This product is manufactured under license fromNeural Audio Corporation and THX Ltd. Marantzhereby grants the user a non-exclusive, non-transferable, limited right of use to this product underUSA and foreign patent, patent pending and othertechnology or trademarks owned by Neural AudioCorporation and THX Ltd. Neural Surround, NeuralAudio, Neural and NRL are trademarks andlogos owned by Neural Audio Corporation, THX is atrademark of THX Ltd., which may be registered insome jurisdictions. All rights reserved.

Manufactured under license under U.S. Patent#s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;6,226,616; 6,487,535; 7,003,467 & other U.S. andworldwide patents issued & pending. DTS, DTSDigital Surround, ES, and Neo:6 are registeredtrademarks and the DTS logos, Symbol and DTS96/24 are trademarks of DTS, Inc. 1996-2007 DTS,Inc. All Rights Reserved.

dts Digital Surround

DTS was introduced in 1994 to provide 5.1 channelsof discrete digital audio into home theater systems.DTS brings you premium quality discrete multichanneldigital sound to both movies and music.DTS is a multichannel sound system designed tocreate full range digital sound reproduction.The no compromise DTS digital process sets thestandard of quality for cinema sound by deliveringan exact copy of the studio master recordings toneighborhood and home theaters.Now, every moviegoer can hear the sound exactly asthe moviemaker intended.DTS can be enjoyed in the home for either movies ormusic on of DVDs, LDs, and CDs.

dts Neo:6

The advantages of discrete multichannel systemsover matrix are well known.But even in homes equipped for discrete multichannel,there remains a need for high-quality matrix decoding.This is because of the large library of matrix surroundmotion pictures available on disc and on VHS tape;and analog television broadcasts.The typical matrix decoder of today derives a centerchannel and a mono surround channel from two-channel matrix stereo material. It is better than asimple matrix in that it includes steering logic toimprove separation, but because of its mono, band-limited surround it can be disappointing to usersaccustomed to discrete multichannel.

Neo:6 offers several important improvements asfollow, Neo:6 provides up to six full-band channels of

matrix decoding from stereo matrix material. Userswith 6.1 and 5.1 systems will derive six and fiveseparate channels, respectively, corresponding tothe standard home-theater speaker layouts.

Neo:6 technology allows various sound elementswithin a channel or channels to be steeredseparately, and in a way which follows naturallyfrom the original presentation.

Neo:6 offers a music mode to expand stereo

nonmatrix recordings into the five- or six-channellayout, in a way which does not diminish the subtletyand integrity of the original stereo recording.

dts Digital Surround ES

DTS-ES Extended Surround is a new multichanneldigital signal format developed by Digital TheaterSystems Inc. While offering high compatibility withthe conventional DTS Digital Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround impression and space expressionthanks to further expanded surround signals. Thisformat has been used professionally in movietheaters since 1999.In addition to the 5.1 surround channels (FL, FR, C,SL, SR and LFE), DTS-ES Extended Surround also

offers the SB (Surround Back) channel for surroundplayback with a total of 6.1 channels. DTS-ESExtended Surround includes two signal formats withdifferent surround signal recording methods, as DTS-ES Discrete 6.1 and DTS-ES Matrix 6.1.

dts Digital Surround 96/24The stereo CD is a 16-bit medium with sampling at44.1 kHz. Professional audio has been 20- or 24-bit for some time, and there is increasing interestin higher sampling rates both for recording and fordelivery into the home. Greater bit depths provideextended dynamic range. Higher sampling ratesallow wider frequency response and the use of anti-alias and reconstruction filters with more favorable

aural characteristics.

DTS 96/24 allows for 5.1channel sound tracks to beencoded at a rate of 96kHz/24bits on DVD-Videotitles.When DVD-video appeared, it became possible todeliver 24-bit, 96 kHz audio into the home, but only intwo channels, and with serious limitations on picture.This capability has had little use.DVD-audio allows 96/24 in six channels, but anew player is needed, and only analog outputs areprovided, necessitating the use of the D/A convertersand analog electronics provided in the player.

DTS 96/24 offers the following:1. Sound quality transparent to the original 96/24

master.

2. Full backward compatibility with all existingdecoders. (Existing decoders will output a 48 kHzsignal)

3. No new player required: DTS 96/24 can be carriedon DVD-video, or in the video zone of DVD-audio,accessible to all DVD players.

4. 96/24 5.1-channel sound with full-quality full-motion video, for music programs and motionpicture soundtracks on DVD-video.

DTS-HD Master Audio is capable of delivering audiothat is a bit-for-bit identical to the studio master.DTS-HD Master Audio delivers audio at super highvariable bit rates -24.5 mega-bits per second (Mbps)on Blu-ray discs and 18.0 Mbps on HD-DVD - thatare significantly higher than standard DVDs . This bitstream is so fast and the transfer rate is so highthat it can deliver the Holy Grail of audio: 7.1 audiochannels at 96k sampling frequency/24 bit depthsthat are identical to the original. With DTS-HD Master

Audio, you will be able to experience movies andmusic, exactly as the artist intended: clear, pure, anduncompromised.

Manufactured under license under U.S. Patent#s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;6,226,616; 6,487,535 & other U.S. and worldwidepatents issued & pending. DTS is a registeredtrademark & the DTS logos and Symbol aretrademarks of DTS, Inc. 1996-2007 DTS, Inc. AllRights Reserved.

DTS-HD High Resolution Audio can deliver up to 7.1channels of sound that is virtually indistinguishablefrom the original. DTS-HD High Resolution Audiodelivers audio at high constant bit rates superior tostandard DVDs---6.0 Mbps on Blu-ray discs and 3.0Mbps on HD-DVD to produce outstanding soundquality. It is capable of delivering up to 7.1 channelsat 96k sampling frequency/24 bit depth resolution. Itallows content creators to deliver rich, high definitionaudio on movies where disc space may not allow forDTS-HD Master Audio.

Only receiver and controller products bearing theTHX Surround EX logo, when in the THX SurroundEX mode, faithfully reproduce this new technologyin the home. This product may also engage theTHX Surround EX mode during the playback of 5.1channel material that is not Dolby Digital SurroundEX eocnded. In such case, the information deliveredto the Surround Back channel will be programdependent and may or may not be very pleasingdepending on the particular soundtrack and thetastes of the individual listener.

SURROUND EX is a trademark of DolbyLaboratories. Used under authorization.

THX Select2Before any home theater component can be THXSelect2 certified, it must pass a rigorous seriesof quality and performance tests. Only then can aproduct feature the THX Select2 logo, which is yourguarantee that the Home Theater products youpurchase will give you superb performance for manyyears to come. THX Select2 requirements definehundreds of parameters, including power amplifierperformance, and pre-amplifier performance andoperation for both digital and analog domains. THXSelect2 receivers also feature proprietary THX

technologies (e.g., THX Mode) which accuratelytranslate movie soundtracks for home theaterplayback.

Neural SurroundTM, THX Technologies has beenchosen as the official surround sound broadcastformat for XM Satellite Radios XM HD Surroundand other leading FM/HD radio stations in the USAand worldwide. Neural Surround, THX Technologiesdelivers the rich envelopment and discrete imagedetail of surround sound in a format 100% compatible

with stereo.

Neural Surround, THX Technologies draws the brainsattention to sonic details in musical instruments,vocals and ambience that are typically masked byother playback systems. This allows the listenerto fully experience the richness and subtleties inrecorded performance as never before for bothsurround encoded material and regular stereomaterial such as CDs or digital media players. NeuralSurround, THX Technologies is enabling the secondsurround sound revolution, bringing surround directlyto your ears!


8/94

ENGLISH

5

Manufactured under license under U.S. Patent#s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;6,226,616; 6,487,535 & other U.S. and worldwidepatents issued & pending. DTS is a registeredtrademark and the DTS logos, Symbol, DTS-HD,DTS-HD High ResolutionAudio and DTS-HD High Res Audio are trademarksof DTS, Inc. 1996-2007 DTS, Inc. All RightsReserved.

Dolby Digital identifies the use of Dolby Digital audiocoding for such consumer formats as DVD andDTV. As with film sound, Dolby Digital can provideup to five full-range channels for left, center, andright screen channels, independent left and rightsurround channels, and a sixth (.1) channel for low-frequency effects.

Dolby Surround Pro Logic II is an improved matrixdecoding technology that provides better spatialityand directionality on Dolby Surround programmaterial; provides a convincing three-dimensionalsoundfield on conventional stereo music recordings;

and is ideally suited to bring the surround experienceto automotive sound. While conventional surroundprogramming is fully compatible with Dolby SurroundPro Logic IIdecoders, soundtracks will be able to beencoded specifically to take full advantage of ProLogic II playback, including separate left and rightsurround channels. (Such material is also compatiblewith conventional Pro Logic decoders.)

Dolby Digital EX creates six full-bandwidth outputchannels from 5.1-channel sources. This is doneusing a matrix decoder that derives three surroundchannels from the two in the original recording. Forbest results, Dolby Digital EX should be used withmovies soundtracks recorded with Dolby Digital

Surround EX.

About Dolby Pro LogicIIxDolby Pro Logic IIx technology delivers a naturaland immersing 7.1-channel listening experienceto the home theater environment. A product ofDolby's expertise in surround sound and matrixdecoding technologies, Dolby Pro Logic IIx is acomplete surround sound solution that maximizesthe entertainment experience from stereo as well as5.1-channel encoded sources.

Dolby Pro Logic IIx is fully compatible with DolbySurround Pro Logic technology and can optimallydecode the thousands of commercially availableDolby Surround encoded video cassettes andtelevision programs with enhanced depth andspatiality. It can also process any high-qualitystereo or Advanced Resolution 5.1-channel musiccontent into a seamless 6.1- or 7.1-channel listeningexperience.

The Dolby Headphone technology provides asurround sound listening experience over headphones.When listening to multichannel content such as DVDmovies over headphones, the listening experienceis fundamentally different than listening to speakers.Since the headphone speaker drivers are coveringthe pinna of the ear, the listening experience differsgreatly from traditional speaker playback. Dolbyutilizes patented headphone perspective curves tosolve this problem and provides a non-fatiguing,immersive, home theater listening experience. DolbyHeadphone also delivers exceptional 3D audio fromstereo material.

Dolby Virtual Speaker is a technologycertifiedby Dolby Laboratories that creates a virtualizedsurround sound experience from two speakers usinga multichannel Dolby Digital source. Additionally,Dolby Virtual Speaker can simulate the surroundsound effect produced by Dolby Pro Logic or DolbyPro Logic II.Dolby Virtual Speaker retains all the originalMultichannel audio information and provides thelistener with the sensation of being surrounded byadditional speakers.

Manufactured under license from Dolby Laboratories.Dolby, Pro Logic, Surround EX, and the double-Dsymbol are trademarks of Dolby Labo ratories.

Dolby TrueHD is Dolbys next-generation losslesstechnology developed for high-definition disc-basedmedia. Dolby TrueHD delivers tantalizing soundthat is bit-for-bit identical to the studio master,unlocking the true high-definition entertainmentexperience on next-generation discs. When coupledwith high-definition video, Dolby TrueHD offers anunprecedented home theater experience that lets

you enjoy sound as stunning as the high-definitionpicture.

Manufactured under license from Dolby Laboratories.Dolby, Pro Logic, Surround EX, and the double-Dsymbol are trademarks of Dolby Laboratories.

Dolby Digital Plus is a highly sophisticated andversatile audio codec based on Dolby Digital anddesigned specifically to adapt to the changingdemands of future audio, video delivery, and audiostorage systems while simultaneously retaining

backwards compatibility with the existing DolbyDigital 5.1-channel home theater systems in usetoday.

Manufactured under license from Dolby Laboratories.Dolby, Pro Logic, Surround EX, and the double-Dsymbol are trademarks of Dolby Laboratories.

Circle Surround II (CS-II) is a powerful and versatilemultichannel technology. CS-II is designed to enableup to 6.1 multichannel surround sound playback

from mono, stereo, CS encoded sources and othermatrix encoded sources. In all cases the decoderextends it into 6 channels of surround audio and aLFE/subwoofer signal. The CS-IIdecoder creates alistening environment that places the listener insidemusic performances and dramatically improvesboth hi-fi audio conventional surround-encodedvideo material. CS-IIprovides composite stereo rearchannels to greatly improve separation and imagepositioning adding a heightened sense of realism toboth audio and A/V productions.

CS-II is packed with other useful feature like dialogclarity (SRS Dialog) for movies and cinema-like bassenrichment (TruBass). CS-II can enable the dialogto become clearer and more discernable in moviesand it enables the bass frequencies contained in theoriginal programming to more closely achieve lowfrequenciesovercoming the low frequency limitationsof the speakers by full octave.

Circle Surround II, Dialog Clarity, TruBass, SRS andsymbol are trademarks of SRS Labs, Inc.

Circle Surround II, Dialog Clarity and TruBass

technology are incorporated under license from SRSLabs, Inc.

HDCD (High Definition Compatible Digital ) is apatented process for delivering on Compact Disc the fullrichness and details of the original microphone feed.HDCD encoded CDs sound better because they areencoded with 20-bits of real musical information ascompared to 16-bits for all other CDs.HDCD overcomes the limitation of the 16-bit CDformat by using a sophisticated system to encode

the additional four bits onto the CD while remainingcompletely compatible with the CD format.When listening to HDCD recordings, you hear moredynamic range, a focused 3-D sound stage, andextremely natural vocal and musical timbre. WithHDCD, you get the body, depth and emotion of theoriginal performance not a flat, digital imitation.HDCD system manufactured under license fromMicrosoft. This product is covered by one or moreof the following: In the United States 5,479,1685,638,074 5,640,161 5,808,574 5,838,274 5,854,6005,864,311 5,872,531 and in Australia 669,114 withother patents pending.

HDMI, the and High-Definition MultimediaInterface are trademarks or registered trademarks ofHDMI Licensing LLC.


9/94

ENGLISH

6

BEFORE USEThis section must be read before any connection ismade to the mains supply.

EQUIPMENT MAINS WORKING SETTING

Your Marantz product has been prepared to complywith the household power and safety requirementsthat exist in your area.SR7002/SR8002 can be powered by 120V AC only.

COPYRIGHT

Recording and playback of any material mayrequire consent. For further information refer to thefollowing:

Copyright Act 1956

Dramatic and Musical Performers Act 1958

Performers Protection Acts 1963 and 1972

Any subsequent statutory enactments and orders

DO NOT LOCATE IN THE FOLLOWING PLACES

To ensure long-lasting use, do not locate the unit where: Exposed to direct sunlight.

Near to sources of heat such as heaters.

Highly humid or poorly ventilated.

Dusty.

Subjected to mechanical vibrations.

On wobbly, inclined or otherwise unstable surfaces

Radiated heat is blocked such as in crampedaudio racks.

To ensure proper heat radiation, ensure the belowclearance from walls and other equipment.

DIGITAL RLVIDEOS-VIDEO

AUX1 INPUT

AUDIO

VOLUME

UPDOWN

STANDBY

PHONES

INPUTSELECTOR

AV SURROUNDRECEIVER SR8 0 0 1

MultEQ

ENTERMENU

PUREDIRECT THX

7.1CHINPUT

MODE AUTO MULTI

A/B

T-MODE MEMORY CLEAR

DISPLAY

EXIT

SPEAKERS

BAND

MIC

PUREDIRECT

SURROUNDSPEAKER

MULTI

DSD

POWERON/OFF

LC

R

S L S S R

LFE

DI G I TAL

SURROUNDV- O FFD I S P M U L T I A U T O T U N E D S T S P K R A B

N I G H T

P E A K A N A L O G

D I G I TA L

A TT

S L E E P S U R R D I R E C TA UT O D ISC 6 . 1 M T X6 . 1 E Q

PCMAAC

Left8 inchs (0.2 m)

or more

Above8 inchs (0.2 m)or more

Right8 inchs (0.2 m)

or more

Rear8 inchs (0.2 m)

or more

KEEP OBJECTS OFF

Keep objects off the unit. Blocking the vent can resultin accident and damage.

DO NOT TOUCH HOT SPOTS DURING ANDIMMEDIATELY AFTER USE

During and immediately after use, the unit is hotin areas other than the controls and rear panelconnection jacks. Do not touch hot spots andespecially the top panel. Contact with hot areas cancause burns.

Opening and closing the front panel doorWhen you want to use the controls behindthe front panel door, open the door by gentlypressing on the lower part o f the panel. Keep thedoor closed when not using these controls.

AVSURROUND RECEIVER SR8001

PHON

ES

STANDBY

LC

RSL

SSR

LFE

DIGITAL

SURROUND

DISPMULTI

AUTOTUNED

STSPKR AB

V-OFF

NIGHT

PEAK

ANALOGDIGITAL

ATT

SLEEP

SURRDIREC

T

AUTO

DISC 6.1

MTX6.1

PCM

AAC

AUX1INPU

T

AUDIO

S-VIDEO

DIGITA

L

VIDEO

L

R

ENTER

DOWN

UP

VOLUME

POWER

ON/OFF

INPUTSEL

ECTOR

Caution:

Be careful not to pinch your fingers between thedoor and the panel.

HD RadioTM technology is a new technology thatenables AM and FM radio stations to broadcastprograms digitally. Digital broadcasting provideslisteners with radically improved audio quality andreception as well as new data services. Furthermore,supplemental program services allow listeners toselect from up to 8 HD Radio programs multicast ona single FM HD Radio channel. For more informationon HD RadioTM technology, visit www.ibiquity.com.

HD RadioTM Technology Manufactured Under LicenseFrom iBiquity Digital Corp. U.S. and Foreign Patents.HD RadioTM and the HD Radio logo are proprietarytrademarks of iBiquity Digital Corp.

XM Satellite Radio Ready

The XM name and related logos are registeredtrademarks of XM Satellite Radio Inc.

XM HD Surround uses Neural SurroundTM technologyto achieve optimal surround sound from XM radio.

There are several factors that can degrade the soundfrom even the best loudspeakers in a listening room.One of the most important is the interaction of soundfrom the loudspeakers with large surfaces such aswalls, the floor, and the ceiling in the room. Evenwith careful loudspeaker placement and acousticaltreatments, there are significant problems that arecaused by room acoustics. These include reflectionsfrom nearby surfaces and standing waves that arecreated between large parallel surfaces in the room.In a home theater the situation is further complicatedbecause there are several listening locations. Theeffects of room acoustics on the sound arriving ateach persons ears are very different and the result isa listening experience that is degraded in a differentway for every person in the room. It is not uncommonto have variations in two adjacent seats that are aslarge as 10 dB, particularly in the frequency rangebelow 250 Hz.

The solution to this problem is to apply room correctionafter precisely measuring how each loudspeakerinteracts with the room. Because the room causesvariations in the frequency response of theloudspeakers that are so large from seat to seat, itis important to measure each loudspeaker at severallocations in the listening room. This should be doneeven if there is only one listener. Measurement at asingle location is not representative of the acousticalproblems in the room and will in most cases, degradeoverall performance. Audyssey MultEQ is the onlytechnology that can achieve room correction for

multiple listeners in a large listening area. It does soby combining the data collected at several points inthe room from each loudspeaker and then applyingcorrection that minimizes the acoustical effects ofthe room and is matched to the frequency resolutionof human perception (known as psychoacoustics).Furthermore, MultEQ correction is applied bothin frequency and time domains and so there areno artifacts (such as smearing of sound or modalringing)that are sometimes associated with traditionalmethods of room equalization.In addition to correcting frequency response problemsover a wide listening area, Audyssey MultEQ providesa completely automated sound system set-upprocess. It identifies how many loudspeakers areconnected to the amplifiers and whether they are full-

range, satellites, or subwoofers. If there is a least onesubwoofer connected, Audyssey MultEQ determinesthe optimum crossover frequency between eachsatellite and the subwoofer(s). It automaticallychecks the polarity of each loudspeaker and alertsthe user if there are any that may be wired out-of-phase relative to the others. It measures thedistance to each loudspeaker from the main listeningposition and adjusts the delays so that sound fromeach loudspeaker arrives at the same time. Finally,Audyssey MuitEQ determines the playback level ofeach loudspeaker and adjusts the volume trims sothat all levels are equal.

MultEQ and the Audyssey MultEQ logo aretrademarks of Audyssey Laboratories, Inc. All rightsreserved.


10/94

ENGLISH

7

OPERATION OF REMOTE CONTROLLER

REMOTE CONTROL

Operate the remote controller within a distance ofapprox. 5m from the infrared receptor window on thefront of the unit.

Remote controller

SR7002/8002

AVSUR

ROUN D

REC

EIV

ERSR8

001

PHONES

STANDB

Y

LC

RSL

SSR

LFE

DIGITAL

SURR

OUND

DISP

MULT

IAUT

OTUNE

DST

SPK

RAB

V-OFF

NIGH

T

PEAK

ANAL

OGDIGI

TAL

ATT

SLEEP

SUR

RDIR

ECT

AUTO

DISC

6.1

MTX6

.1

PCM

AAC

AUX1INPUT

AUDIO

S- VIDEO

DIGITA

L

VIDEO

L

R

ENTER

DOW

N

UP

VOLUME

POWE

RON/ O

FF

INPUTSELE

CTOR

2

3

1

5

6

4

8

09

7

ME MO

C LEAR

D S S

A MP

A U X 2

A U X 1

T A P E

TU N ER

CD

C D - R

MD

VC R

D VD

T V

S O U R C E

O F F

ON / O FF

P O WE R

O N

D4

D5

D2

M

D1

D3

D5

OK

VOL

C H

PR EV

M U T E

M E N U

EXI T

GUI DE

TE ST

CH. S E L

SURR

7 . 1 CH

AT T

S P K -A B

DI S P

OSD

SLE E P

1

2

L I G H T L

e a rn in g

R e mo t

e C o n tr

o ll e r

R C 1 4 0 0

60

Approx

.5m

Caution: Do not allow direct sunlight, an inverter fluorescent

light or other strong source of light to shine onto

the players infrared receptor window. Otherwise,the operation of the remote controller may bedisabled.

Bear in mind that operating the remote controllermay cause other devices operated by infrared raysto be operated by mistake.

The remote controller cannot be operated if thespace between the controller and the playersinfrared receptor window is obstructed.

Do not place any objects on top of the remotecontroller.Doing so may cause one or more buttons to beheld down which will cause the batteries to rundown.

LOADING BATTERIES

Before using the remote controller for the first time,load the batteries in the remote controller. Thebatteries provided are used to verify the operationsof the remote controller only.

1. Remove the back cover.

2. Insert the new batteries (AAA type) with correct and polarity.

3. Close the battery cover until it clicks shut.

1. Remove the battery cover.

2. Insert the new batteries (AAA type) with correct and polarity.

3. Close the battery cover until it clicks shut.

CAUTIONS ON BATTERIES

Use AAA type batteries in this remote controller.

We recommend that you use alkali batteries.

The life of the batteries used with the remotecontroller is about 4 months with normal use.

If the remote controller does not operate fromclose to the unit, replace the batteries with newones, even if less then a year has passed.

The included battery is only for verifying operation.Replace it with a new battery as soon as possible.

When inserting the batteries, be careful to do so in

the proper direction, following the + and - marks inthe remote controllers battery compartment.

To prevent damage or battery fluid leakage:

- Do not use a new battery with an old one.

- Do not use two different types of batteries.

- Do not short-circuit, disassemble, heat ordispose of batteries in flames.

Remove the batteries when not planning to use theremote controller for a long period of time.

If the batteries should leak, carefully wipe off thefluid from the inside of the battery compartment,then insert new batteries.

When disposing of used batteries, please complywith governmental regulations or environmental

public instructions rules that apply in your countryor area.

BATTERY REPLACEMENT INTERVAL (RC8001SR)

When the batteries wear out, a battery mark isdisplayed on the LCD. Although the remote controlcan still be used when the battery mark is displayed,the batteries should be replaced as soon as possible.The LCD eventually starts to flash when buttons arepressed, the remote control will be unable to transmitsignals or learn codes.

This remote control uses non-volatile memory sothat the learned codes and macro programs areretained even if the batteries are removed.

Reset the clock after replacing the batteries.


11/94

ENGLISH

8

y MULTI (Multi Room) buttonPress this button to activate the Multiroom system.

MULTI indicator will be illuminated in the display.(See page 78)

u MULTI SPEAKER buttonPress this button to activate the Multiroom Speakersystem. MULTI indicator will be illuminated in thedisplay. (See page 78)

i BAND buttonPress this button to switch between FM, AM and XM(XM Ready) in the TUNER mode.

o T-MODE buttonPress this button to select the auto stereo mode ormono mode when the FM band is selected.

The AUTO indicator lights in the auto stereo mode.(See page 68)

!0 MEMORY buttonPress this button to enter the tuner preset memorynumbers or station names. (See page 68)

!1 CLEAR buttonPress this button to cancel the station-memorysetting mode or preset scan tuning. (See page 69)

q POWER switch and STANDBY indicatorWhen this switch is pressed once, the unit turns ON

and the display illuminates. When pressed again, theunit turns OFF and the STANDBY indicator will beilluminated.

w INPUT SELECTOR knob(AUDIO/ VIDEO)

This knob is used to select the input sources. (Seepage 58)

e HEADPHONE jack for stereo headphonesThis jack may be used to listen to the units outputthrough a pair of headphones. Be certain that theheadphones have a standard 1/4 stereo phonoplug.

r SURROUND MODE buttonPress this button to select the surround mode.

t AUTO (Auto surround) buttonPress this button to select the AUTO mode from thesurround modes. When this mode is selected, theunit determines the surround mode corresponding toa digital input signal automatically.

!2 INFRARED receiving sensor windowThis window receives infrared signals for the remotecontroller.

!3 VOLUME control knobThis knob is used to adjust the overall sound level.Turning the control clockwise increases the soundlevel.

!4 AUX1 INPUT jacksThese auxiliary video/audio input jacks accept theconnections of a camcorder, portable DVD, gameetc. When not using these jacks, protect with theincluded jack covers.

How to Attach the Front AUX Jack Cover

AUX1INPUT

AUDIO

S-VIDEO

DIGITAL

VIDEO

L

R

UP

PUSHPUSH

Front AUX Jack Cover

!5 M-DAX buttonPress this button to select M-DAX processing forinput source. (See page 59)

!6 SPEAKER A/B buttonPress this button to select speaker systems A and/orB.

!7 MIC jackAutomatically measure speaker characteristics usingthe included microphone. (See page 46)

!8 DISPLAY buttonPress this button to change the FL display mode.

!9 EXIT buttonPress this button to exit from the SETUP MAINMENU.

@0 Cursor (5,,2,3) / ENTER buttonPress these buttons to operate the SETUP MAINMENU and TUNER function.

@1 MENU buttonPress this button to enter the SETUP MAIN MENU.

@2 7.1CH INPUT buttonPress this button to select the output of an externalmultichannel player.

@3 THX buttonPress this button to select THX processing for inputsource.

@4 PURE DIRECT button and indicatorWhen this button is pressed once, SOURCEDIRECT appears on the FL display. If pressed again,PURE DIRECT appears. After 2 seconds, the FLdisplay indication goes out.In the source/pure direct mode, the tone controlcircuitry and bass management are bypassed.

Notes:

The surround mode is automatically switched toAUTO when the pure direct function is turned on.

Additionally, speaker configurations are fixedautomatically as follows.

Front SPKR = LARGECenter SPKR = LARGE

Surround SPKR = LARGESurround Back SPKR = LARGESub woofer = YES

NAMES AND FUNCTION

DIGITAL RLVIDEOS-VIDEO

AUX 1 INPUT

AUDIO

VOLUME

UPDOWN

STANDBY

PHONES

INPUTSELECTOR

AVSURROUND RECEIVER SR8002

M-DAX

ENTER

MENU

PUREDIRECT THX

7.1CHINPUT

M OD E A UT O M UL TI

A/B

T-MODE MEMORY CLEAR

DISPLAY

EXIT

SPEAKERS

BAND

MIC

PUREDIRECT

SURROUND

SPEAKER

MULTI

M-DAX

POWERON/STANDBY

L C R

S L S S R

LFE

DIGITAL

SURROUNDV-OFFD I SP M UL TI A UT O T U NE D S T S P K R A B

NIGHT

P EA K A NA LO G

DIGITAL

ATT

S LE EP S UR R D I RE CTAUTO DISC 6.1 MTX 6.1 EQ

PCMAAC

@1 !9@0

q ty ur !2 !3 !4ew

@4 @3 @2 !8 !6

io!0!1

!7 !5

FRONT PANEL


12/94

ENGLISH

9

FL DISPLAY AND INDICATER

DISP MULTI AUTO TUNED ST VOFF NIGHT PEAK ANALOG

DIGITAL

ATT

SLEEP SURRAUTO DISC 6.1DIRECT MTX 6.1 SPKR ABDIGITAL

SURROUND

PCM

L C R

SL S SR

LFE

EQ

M-DAX-DAX

9

gs

a

0 8 61 7

h k 0 2 4fj l 1 3 5d

2

a DISP (Display Off) indicatorThis indicator is illuminated when this unit is in thedisplay off mode.

s SLEEP timer indicatorThis indicator is illuminated when the sleep timerfunction in the main-room is in use.

d Multi-room system indicatorThis indicator is illuminated when the multi-roomsystem is active.

fAUTO SURR(Auto Surround mode) indicator

This indicator is illuminated to show that the AUTOSURROUND mode is in use.

g TUNERs indicators AUTO : This indicator illuminates when the

tuners Auto mode is in use. TUNED : This indicator illuminates when the

tuner receives a sufficiently strongradio signal.

ST(Stereo) : This indicator illuminates when anFM station is being tuned into stereocondition.

h DTS-ES mode indicators (DISC6.1, MTX6.1)These indicators will illuminate to show the DTS-ESdecoding mode (Discrete 6.1 or Matrix 6.1).

j V (video)-OFF mode indicatorThis indicator is illuminated when the Video-OFFfunction is active.

k NIGHT mode indicatorThis indicator is illuminated when this unit is in theNight mode, which reduces the dynamic range ofdigital program material at low volume levels.

l SPKR (speaker) AB indicatorThis indicator is illuminated when the speakersystem is active.

0 PEAK indicatorThis indicator is a monitor for an analog audio inputsignal. If the selected analog audio input signal isgreater than the capable level of internal processing,this will illuminate. If this happens, you should pressthe ATT button. (See page 11)

1 EQ indicatorThis indicator is illuminated when the EQ MODE is

selected to AUDDYSSEY, FRONT or FLAT.

2 ATT (Attenuation) indicatorThis indicator is illuminated when the attenuationfunction is active.

3 DIGITAL Input IndicatorThis indicator is illuminated when a digital input hasbeen selected.

4 ANALOG input indicatorThis indicator is illuminated when an analog inputsource has been selected.

5 SIGNAL FORMAT indicators2DIGITALThis indicator is illuminated when a Dolby Digitalsignal is input.EXThis indicator is illuminated when a Dolby Digital EXsignal is input.dtsThis indicator is illuminated when a DTS signal isinput.ESThis indicator is illuminated when a DTS ES signalis input.

96/24This indicator is illuminated when a DTS 96/24 signalis input.PCMThis indicator is illuminated when the input signal isPCM (pulse code modulation).2 SURROUNDThis indicator is illuminated when a Dolby Surroundsignal is input.

6 HDMI indicatorThis indicator is illuminated when the HDMI device isconnected to the unit.

7 ENCODED CHANNEL STATUS indicatorsThese indicators display the channels that areencoded with a digitalinput signal.If the digital input signal is Dolby Digital 5.1ch orDTS 5.1ch, L, C, R, SL, SR and LFE will beilluminated.If the digital input signal is 2 channel PCM-audio, Land R will be illuminated.If the digital input signal is 7.1channel PCM-Audio.L, C, R, SL, S , SR and LFE will beilluminated.If the digital input signal is Dolby Digital 5.1ch signalwith Surround EX flag or DTS-ES, L, C, R, SL,S , SR and LFE will be illuminated.

Note:

When this unit is decoding a Dolby True HD signal,the status of the input signal is displayed, dependingon the number of speaker channels being used.The S indicator is not illuminated when a 7.1-channel signal is input to a 5.1-channel speaker systemwith L, C, R, SL, SR, and SW.

8 HDCD indicatorThis indicator is illuminated when the HDCD signal isdecoded from digital input signal.

9 Main Information DisplayThis display shows messages relating to the status,input source, surround mode, tuner, volume level orother aspects of units operation.

0 SOURCE DIRECT indicatorThis indicator is illuminated when this unit is in theSOURCE DIRECT mode.

1 M-DAX indicatorThis indicator illuminates when this unit is in the M-DAX mode.

2 PURE DIRECT indicatorThis indicator is illuminated when this unit is in thePURE DIRECT mode.


13/94

ENGLISH

10

y XM terminalSee page 37 for connecting information.

u Sub Speaker outputs terminals(MULTI SPEAKER / SPEAKER C)

Two terminals are provided for the front left, and rightspeakers for multi room.The terminals can be used to connect a third set ofspeakers by setting the SPEAKER C selector switchto ON. For connection and use, see page 38.

i Speaker outputs terminalsNine terminals are provided for the front (A) left, front(A) right, front (B) left, front (B) right, front center,surround left, surround right, surround back left andsurround back right speakers.

o SPEAKER C switchSet to ON to connect a bi-amp to this receiver or setto OFF for normal speaker connection (surroundback and multiroom speakers). (See page 38)

!0 AC OUTLETSConnect the AC power cables of components such as

a DVD and CD player to these outlets. SWITCHED andUNSWITCHED outlets are provided.The one marked SWITCHED provides poweronly when the unit is turned on and is useful forcomponents which you use every time you play yoursystem.The one marked UNSWITCHED is always live aslong as the unit is plugged into a live outlet.A component connected here may be left onpermanently, or may be switched off with via its ownpower switch.

Caution:

In order to avoid potential turn-off thumps, anythingplugged into these outlets should be powered upbefore the unit is turned on.

The capacity of this AC outlet is 150W. Do notconnect devices that consume electricity more thanthe capacity of these AC outlets. If the total powerconsumption of the connected devices exceeds thecapacity, the protection circuit shuts down the powersupply.

!1 AC INLETPlug the supplied power cord into this AC INLET andthen into the power outlet on the wall.This unit can be powered by 120V AC only.

!2 Preamp Outputs(L, R, SL, SR, SBL, SBR, C)

Jacks for L (front left), R (front right), C (Center), SL(surround left), SR (surround right), SBL (surroundback left) and SBR (surround back right).Use these jacks for connection to external poweramplifiers.

!3 Subwoofer OutputConnect this jack to the line level input of a poweredsubwoofer. If an external subwoofer amplifier is used,

connect this jack to the subwoofer amplifier input.If you are using two subwoofers, either powered orwith a 2 channel subwoofer amplifier, connect a Yconnector to the subwoofer output jack and run onecable from it to each subwoofer amplifier.

!4 7.1 CHANNEL or AUX2 INPUTBy connecting a DVD Audio player, Super Audio CDmultichannel player, or other components that has amultichannel port, you can playback the audio with5.1 channel or 7.1 channel outputs.

!5 EMITTER OUT (SR8002 only)The signals input to the IR RECEIVER IN terminals

are output to this terminal. External devices can becontrolled by connecting them to this terminal.

!6 IR RECEIVER IN (SR8002 only)Connect to an external IR receiver.

!7 FLASHER IN (Flasher input terminal)These terminals are to control the unit from each zone.Connect the control signal from a Keypad, etc.

!8 DC TRIGGER output terminalConnect a device that needs to be triggered by DCunder certain conditions (screen, power strip, etc)Use the system OSD setup menu to determine theconditions by which these jack will be active.

Note:

This output voltage is for (status) control only, It isnot sufficient for drive capability.

!9 MULTI ROOM REMOTE IN/OUT terminalsIN: Connect to a multi-room remote control

device, available from your Marantz dealer.OUT: Connect to the Marantz component equipped

with remote control (RC-5) terminals in Multizone (Multi room).

REAR PANEL

e Multiroom Outputs

(Audio output A/B, Video)These are the audio and video output jacks for theMulti zone (Multi room).Connect these jacks to optional audio poweramplifiers or video display devices to listen and viewthe source selected by the multiroom system in aremote room.

Note:

The SR7002 does not use Multiroom audio outputB.

r MONITOR OUTThese are monitor outputs and each one includesboth composite video and S-video configurations.

When connecting two video monitors or televisions,be aware that the OSD interface can be used withboth MONITOR OUT connections.

t RS-232CThe RS-232C port is to be used in conjunction withan external controller to control the operation of theunit by using an external device.The RS-232C port may also be used in the future toupdate the operating software of the unit so that it willbe able to support new digital audio formats and thelike as they are introduced.

q FM antenna terminal (75 ohms)

Connect an external FM antenna with a coaxialcable, or a cable network FM source.

AM antenna and ground terminalsConnect the supplied AM loop antenna. Use theterminals marked AM and GND. The supplied AMloop antenna will provide good AM reception in mostareas. Position the loop antenna until you hear thebest reception.

Note:

The SR8002 can receive HD Radio broadcasts. (Seep.70)

w COMPONENT VIDEO INPUT/

OUTPUTIf your DVD player or other device has componentvideo connectors, be sure to connect them to thesecomponent video connectors on the unit. This unithas 4 component video input connectors to obtainthe color information (Y, CB, CR) directly from therecorded DVD signal or other video component andtwo component video outputs connector to output itdirectly into the matrix decoder of the display device.By sending the pure DVD component video signaldirectly, the DVD signal forgoes the extra processingthat normally would degrade the image. The result isvastly increased image quality, with incredibly life likecolors and crisp detail.

HDMIDMIVer1.3er1.3

REMOTEEMOTE MULTI RCULTI RC

rq w u it y

o!0!1!2!4!9@0 !8!7 !6

@3@4

!5 !3

@2

@1

e

e


14/94

ENGLISH

11

REMOTE CONTROLOPERATION (RC8001SR)

NAME AND FUNCTION

The provided remote controller is a universalremote controller. The POWER button, numericbuttons and control buttons are used in commonacross different input source components.The input source controlled with the remote controller

changes when one of the input selector buttons ispressed.

z Infrared Transmitter and LearningSensor

This transmitter emits infrared light. Press the buttonswhile pointing the transmitter towards the infraredreceiver window of the unit or other AV equipment.Be sure to also point towards other remote controlswhen using the learning function.

x POWER ON and OFF buttons

(When AMP mode is selected)These buttons are used to turn the unit on or off.

c SOURCE ON/OFF buttonThis button is used to turn a specific source (such asa DVD player) on or off independently from the restof the system.

v M (Mode) buttonThis button is used to program Macros. Pressing thisbutton switches between Normal mode and Macromode.The > button is used to move to the next page. Up to20 programs (4 pages) can be made. Holding downthe M button for three seconds or more switches tothe Setup mode, where the Setup menu is shown on

the LCD. The Setup menu has four pages, and the >button is used to move to the next page. Pressing the> button from page 4 returns you to page 1.

b D1 to D5 (Direct) buttonsFive types of direct operations can be performedfor each of the 12 source buttons such as the DVD,television, amplifier, and other AV equipment. Thepages can be switched, so 4 pages 5 types = 20operations can be performed for a single source. Thetext display can also be changed.

n > (Page) buttonThis button is used to switch pages for the Direct

button. The current page is shown on the LCD.

m VOL (Volume) buttonThis button is used to adjust the volume for theamplifier and television.

Note:

Set the AMP mode to use this button with the unit.

2 31

5 64

8

0

97

MEMOCLEAR

DSS

AMPAUX2AUX1TAPE

TUNER CD CD-R MD

VCRDVDTV

SOURCE

OFFON/OFF

POWER

ON

D4

D5

D2

M

D1

D3

D5

OK

VOLCH

PREV MUTE

MENU EXIT

GUIDE

T ES T C H. SE L

LIPSYNC

THX

SURR

7.1CH ATT SPK-AB

DISP OSD SLEEP

1 2

LIGHT

Learning Remote ControllerRC8001SR

z

cv

b

n

x

m

,

.

1

26

7

8

9

0

1

3

4

5

0

@0 REMOTE CONT. IN/OUT terminalsConnect to a Marantz component equipped withremote control (RC-5) terminals.

@1 AUDIO IN/OUT (TV, DVD, VCR1,DSS/VCR2, TAPE, CD/CDR)

These are the analog audio inputs and outputs.There are 6 audio inputs and 4 audio outputs. Theaudio jacks are nominally labeled for cassette tapedecks, compact disc players, DVD players and etc....The audio inputs and outputs require RCA-type

connectors.

@2 DIGITAL INPUT (Dig.1 - 6) /OUTPUT (coaxial, optical)

These are the digital audio inputs and outputs. Thereare 3 digital inputs with coaxial jacks, 3 with opticaljacks.The inputs accept digital audio signals from acompact disc, LD, DVD, or other digital sourcecomponent.For digital output, there is 1 coaxial output and 1optical output.The digital outputs can be connected to MDrecorders, CD recorders, DAT decks, or other similarcomponents.

@3 VIDEO IN/OUT(TV, DVD, VCR1, DSS/VCR2)

These are the video inputs and outputs. Thereare 4 video inputs and 2 video outputs and eachone includes both composite video and S-videoconfigurations. Connect VCRs, DVD players, andother video components to the video inputs.The 2 video output channels can be used to beconnected to video tape recorders for makingrecordings.

@4 HDMI INPUT / OUTPUTThis unit has 4 HDMI inputs and 2 HDMI output. The

input function can be selected from the OSD menusystem. (See page 43)

, MUTE buttonThis button is used to mute the audio for the amplifierand television.

Note:

Set the AMP mode to use this button with the unit.

. GUIDE buttonThis button is used to display the menus for the DVDplayer, DSS (satellite broadcasting tuner), or otherAV equipment.

(when AMP mode is selected)This button is used to select the LIP.SYNC mode.

0 EXIT button

(when AMP mode is selected)This button is used to cancel settings in the setupmenu.

1 Numeric buttonsThese buttons are used to switch between 0 to 9of the source components. If the source is set tothe amplifier, these buttons are used to performoperations.

(when AMP mode is selected)

(1) TEST buttonThis button is used to enter the test tone menu.

(2) CH SEL. (channel select) buttonThis button is used to call up SETUP MAIN MENUand adjust speaker levels or 7.1 ch input level.

(3) SURR (surround) buttonThis button is used to select the surround mode.

(4) 7.1CH buttonThis button is used to select the output of an externalmulti channel decoder.

(5) ATT buttonWhen the input signal is too high and the voicedistorts even by throttling the unit VOLUME control,turn on this function. ATT is indicated when this

function is activated.The input level is reduced. Attenuator is invalid foruse with the output signal of REC OUT.

Note:

This function is unavailable during the digital inputis selected.

(6) SPK-AB buttonSpeaker mode is switched in the followingsequence.

A B A+B off


15/94

ENGLISH

12

LCD INDICATORS (RC8001SR)

Information about currently selected source anddirect code names are displayed on the LCD.

LEARN

NAME

MACRO

USE PAGE 1 2 3 4

A

B

C

D

EF

G

H

I

J

A Source Name indicatorThis displays the name of the selected source, suchas DVD, television, or other AV equipment (up to fivecharacters).

B Direct Button Name indicatorThis displays up to 20 types of button names for eachsource. (up to six characters)

C Page indicatorThis displays the current page position.

D Transmission indicatorThis indicator is displayed when the remote controlleris sending a signal.

E USE indicatorThis indicator is displayed under normal operation.

F Battery Level indicatorThis indicator is displayed when the battery level islow.

G TIMER indicatorThis indicator is displayed when the macro timer isset.

(7) DISP. buttonSelects the display mode for the front display of theunit.

(8) OSD buttonWhen this button is pressed, the current setting aredisplayed on the TV monitor.

(9) SLEEP (sleep timer) buttonThis button is used for setting the sleep timer.Each time this button is pressed, the sleep timeris increased by 10 minutes, in a range of 10120minutes.

(0) THX buttonUse this button to select the THX mode.

2 MEMO buttonThis button is used to store settings to memory orprogram a source.

3 CONTROL buttonThses buttons are used when operating the PLAY,STOP, PAUSE, and other commands of a source.

Note:

This button is unavailable for the unit.

4 SOURCE buttonThses buttons are used to switch the source of yourA/V Receiver / amplifer. Each time a source button ispressed, the remote controller changes to the sourcewhich was pressed.This remote controller can control 12 types ofequipment. To change the A/V Receiver / amplifiersource, press this button twice within two seconds.The signal is sent when it is pressed the secondtime.

Note:

Select the AMP as the source to use this remotecontroller with the unit.

The MD button does not work with the unit.

5 LIGHT 1 and 2 buttonsPressing these buttons will light up the LCD and itsbuttons. This lighting time can be set. If the lightingtime is set to 0 seconds, the backlight turns on onlywhile this button is pressed. The operations forLIGHT 1 and 2 are identical.

6 CLEAR buttonThis button is used to erase the memory or programof a source.

7 MENU button

(when AMP mode is selected)This button is used to call up the SETUP MAINMENU of the unit.

8 PREV (Previous) buttonThis button is used to return to the previous channelon the television or other device.

Note:

This button is unavailable for the unit.

9 CH (Channel) buttonThis is used to change channels.

0 CURSOR buttonsThese buttons are used when controlling the cursorof the unit, DVD, or other AV equipment.

1 LCDInformation about the sources and modes are shownon the LCD.

H MACRO indicatorThis indicator is displayed when the remote controlleris in macro programming mode.

I NAME indicatorThis indicator is displayed when the remote controlleris in renaming mode.

J LEARN indicatorThis indicator is displayed when the remote controlleris in learning mode.


16/94


17/94

ENGLISH

14

CONTROLLING MARANTZ COMPONENTS

1. Press the desired function button. The selected function name and USE are displayed in the LCD.

2. Press the desired operation buttons to play the selected component. For details, refer to the components user guide.

It may not be possible to operate some models.

CONTROLLING A MARANTZ DVD PLAYER (DVD MODE)

2 31

5 64

8

0

97

MEMOCLEAR

DSS

AMPAUX2AUX1TAPE

TUNER CD CD-R MD

VCRDVDTV

SOURCE

OFF ON/OFFPOWER

ON

D4

D5

D2

M

D1

D3

D5

OK

VOLCH

PREV MUTE

MENU EXIT

GUIDE

T ES T C H. SE L SURR

7.1CH ATT SPK-AB

DISP OSD SLEEP

1 2

LIGHT

LIP.SYNC

THX

LearningRemote Controller

RC8001SR

D1

D5

D4

D2

D3

D5

SOURCE

OFF ON/OFFPOWER

ON

OK

2 31

5 64

8

0

97

MEMOCLEAR

T ES T C H. SE L SURR

7.1CH ATT SPK-AB

DISP OSD SLEEP

DVD

MENU

USE PAGE 1

SOURCE ON/OFF Turns the DVD player on and off

POWER ON Turns the DVD p layer on

POWER OFF Turns the DVD player off

D1 - D5 / >(Page) (Refer to page vi)

Cursor/OK Move the cursor, enters the sett ing

MENU Calls up the menu of DVD disc

0-9 Input the numeric

MEMO Call up the programming menu

CLEAR Clears the inputting

2 Play

4 / Skip forward or previous chapter/track

9 Stop; Pause

CONTROLLING A MARANTZ CD PLAYER (CD MODE)

2 31

5 64

8

0

97

MEMOCLEAR

DSS

AMPAUX2AUX1TAPE

TUNER CD CD-R MD

VCRDVDTV

SOURCE

OFF ON/OFFPOWER

ON

D4

D5

D2

M

D1

D3

D5

OK

VOLCH

PREV MUTE

MENU EXIT

GUIDE

T ES T C H. S EL SURR

7.1CH ATT SPK-AB

DISP OSD SLEEP

1 2

LIGHT

LIP.SYNC

THX

LearningRemote Controller

RC8001SR

D1

D5

D4

D2

D3

D5

SOURCE

OFF ON/OFFPOWER

ON

2 31

5 64

8

0

97

MEMOCLEAR

T ES T C H. S EL SURR

7.1CH ATT SPK-AB

DISP OSD SLEEP

CD

MENU

USE PAGE 1

SOURCE ON/OFF Turns the CD player on and off

POWER ON Turns the CD player on

POWER OFF Turns the CD player off


MENU Switches the display information


MEMO Programs


2 Play

4 / Skip forward or previous track

9 Stop; Pause


18/94

ENGLISH

15

CONTROLLING A MARANTZ VCR (VCR MODE)

2 31

5 64

8

0

97

MEMOCLEAR

DSS

AMPAUX2AUX1TAPE

TUNER CD CD-R MD

VCRDVDTV

SOURCE

OFF ON/OFFPOWER

ON

D4

D5

D2

M

D1

D3

D5

OK

VOLCH

PREV MUTE

MENU EXIT

GUIDE

T ES T C H. SE L S UR R

7.1CH ATT SPK-AB

DISP OSD SLEEP

1 2

LIGHT

LIP.SYNC

THX

LearningRemote ControllerRC8001SR

D1

D5

D4

D2

D3

D5

SOURCE

ON/OFFPOWER

2 31

5 64

8

0

97

C H. S EL S U RR

7.1CH ATT SPK-AB

DISP OSD SLEEP

VCR

MENU EXIT

USE PAGE 1

SOURCE ON/OFF Turns the VCR on and off


MENU Call up the menu

EXIT Exits the programming menu

0-9 Input the numeric 2 Play

4 / Skip forward or previous track

9 Stop

; Pause0 Record

CONTROLLING A MARANTZ CD RECORDER (CDR MODE)

2 31

5 64

8

0

97

MEMOCLEAR

DSS

AMPAUX2AUX1TAPE

TUNER CD CD-R MD

VCRDVDTV

SOURCE

OFF ON/OFFPOWER

ON

D4

D5

D2

M

D1

D3

D5

OK

VOLCH

PREV MUTE

MENU EXIT

GUIDE


7.1CH ATT SPK-AB

DISP OSD SLEEP

1 2

LIGHT

LIP.SYNC

THX


D1

D5

D4

D2

D3

D5

SOURCE

OFF ON/OFFPOWER

ON

2 31

5 64

8

0

97

MEMOCLEAR


7.1CH ATT SPK-AB

DISP OSD SLEEP

CD-R

USE PAGE 1

MENU

SOURCE ON/OFF Turns the CD recorder on and off

POWER ON Turns the CD recorder on

POWER OFF Turns the CD recorder off


MENU Swi tches the displ ay i nfor ma tion


MEMO Programs


2 Play

4 / Skip forward or previous track9 Stop

; Pause0 Record

CONTROLLING A MARANTZ MD DECK (MD MODE)

2 31

5 64

8

0

97

MEMOCLEAR

DSS

AMPAUX2AUX1TAPE

TUNER CD CD-R MD

VCRDVDTV

SOURCE

OFF ON/OFFPOWER

ON

D4

D5

D2

M

D1

D3

D5

OK

VOLCH

PREV MUTE

MENU EXIT

GUIDE


7.1CH ATT SPK-AB

DISP OSD SLEEP

1 2

LIGHT

LIP.SYNC

THX


D1

D5

D4

D2

D3

D5

SOURCE

OFF ON/OFFPOWER

ON

2 31

5 64

8

0

97

MEMOCLEAR

MENU

MD

USE PAGE 1

SOURCE ON/OFF Turns the MD deck on and off

POWER ON Turns the MD deck on

POWER OFF Turns the MD deck off


MENU Switches the display information


MEMO Programs


2 Play

4 / Skip forward or previous track9 Stop

; Pause0 Record


19/94

ENGLISH

16

CONTROLLING A MARANTZ TAPE DECK (TAPE MODE)

2 31

5 64

8

0

97

MEMOCLEAR

DSS

AMPAUX2AUX1TAPE

TUNER CD CD-R MD

VCRDVDTV

SOURCE

OFF ON/OFFPOWER

ON

D4

D5

D2

M

D1

D3

D5

OK

VOLCH

PREV MUTE

MENU EXIT

GUIDE


7.1CH ATT SPK-AB

DISP OSD SLEEP

1 2

LIGHT

LIP.SYNC

THX


D1

D5

D4

D2

D3

D5

2 31

5 64

8

0

97

C H. S EL S U RR

7.1CH ATT SPK-AB

DISP OSD SLEEP

SOURCE

OFF ON/OFFPOWER

ON

MEMOCLEAR

TAPE

USE PAGE 1

SOURCE ON/OFF Turns the TAPE deck on and off

POWER ON Turns the TAPE deck on

POWER OFF Turns the TAPE deck off



MEMO Programs


2 Play

4 / Skip forward or previous track9 Stop; Pause

0 Record

CONTROLLING A MARANTZ UNIVERSAL DOCK (AUX1 MODE)

2 31

5 64

8

0

97

MEMOCLEAR

DSS

AMPAUX2AUX1TAPE

TUNER CD CD-R MD

VCRDVDTV

SOURCE

OFF ON/OFFPOWER

ON

D4

D5

D2

M

D1

D3

D5

OK

VOLCH

PREV MUTE

MENU EXIT

GUIDE


7.1CH ATT SPK-AB

DISP OSD SLEEP

1 2

LIGHT

LIP.SYNC

THX


D1

D5

D4

D2

D3

D5

2 31

5 64

8

0

97

C H. S EL S U RR

7.1CH ATT SPK-AB

DISP OSD SLEEP

SOURCE

OFF ON/OFFPOWER

ON

MEMOCLEAR

TAPE

USE PAGE 1

SOURCE ON/OFFTurns the UNIVERSAL DOCK

(Dock connector) ON and OFF

POWER ONTurns the UNIVERSAL DOCK

(Dock connector) ON

POWER OFFTurns the UNIVERSAL DOCK

(Dock connector) OFF

D1 - D5 / >(Pag

Documents

IBJSC.com | I-WEB.com.vn Manual 498031910