IBJSC.com | I-WEB.com.vn - 953472190

8/7/2019 IBJSC.com | I-WEB.com.vn - 953472190

1/88


2/88

I


3/88

II

ENGLISHFRANCAISESPAOL

n SAFETY PRECAUTIONS

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVECOVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning ash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the presence ouninsulated dangerous voltage within the products enclosurethat may be o su fcient magnitude to constitute a risk oelectric shock to persons.

The exclamation point within an equilateral triangle is intendedto alert the user to the presence o important operatingand maintenance (servicing) instructions in the literatureaccompanying the appliance.

WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:To completely disconnect this product rom the mains, disconnect the plug

rom the wall socket outlet.The mains plug is used to completely interrupt the power supply to the unitand must be within easy access by the user.

PRECAUTION:Pour dconnecter compltement ce produit du courant secteur, dbranchezla prise de la prise murale.La prise secteur est utilise pour couper compltement lalimentation delappareil et lutilisateur doit pouvoir y accder acilement.

PRECAUCIN:Para desconectar completamente este producto de la alim entacin elctrica,desconecte el enchu e del enchu e de la pared.El enchu e de la alimentacin elctrica se utiliza para interrumpir por completoel suministro de alimentacin elctrica a la unidad y debe de encontrarse enun lugar al que el usuario tenga cil acceso.

IMPORTANT SAFETYINSTRUCTIONS

1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings.

Install in accordance with the manu acturers instructions.8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifers) that produce heat.9. Do not de eat the sa ety purpose o the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third gr ounding prong. The wide blade or thethird prong are provided or your sa ety. I the provided plug does not ft intoyour outlet, consult an electrician or replacement o the obsolete outlet.

10. Protect the power cord rom being walked on or pinched particularly atplugs, convenience receptacles, and the point where they exit rom theapparatus.

11. Only use attachments/accessories specifed by the manu acturer.12. Use only with the cart, stand, tripod, bracket, or table

specifed by the manu acturer, or sold w ith the apparatus.When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury rom tip-over.

13. Unplug this apparatus during lightning storms or whenunused or long periods o time.

14. Re er all servicing t o qualifed service personnel.Servicing is required when the apparatus has been damaged in any way,such as power-supply cord or plug is damaged, liquid has been spilled orobjects have allen into the apparatus, the apparatus has been exposed torain or moisture, does not operate normally, or has been dropped.

15. Batteries shall not be exposed to excessive heat such as sunshine, fre orthe like.

CAUTION:HOT SURFACE. DO NOT TOUCH.The top sur ace over the internal heat sink may become hotwhen operating this product continuously.Do not touch hot areas, especially around the Hot sur acemark and the top panel.

PRECAUTION:SURFACE CHAUDE. NE PAS TOUCHER.La sur ace suprieure du dissipateur de chaleur peut devenirchaude si vous utilisez ce produit en continu.Ne touchez pas les zones chaudes, tout particulirement verslinscription Hot sur ace mark et le panneau suprieur.

PRECAUCIN:SUPERFICIE CALIENTE. NO TOCAR.La superfcie superior sobre el disipador de calor internopodra llegar a calentarse al operar este producto de ormacontinua.No toque las reas calientes, especialmente las situadasalrededor de la Hot sur ace mark y del panel superior.

FCC INFORMATION (For US customers)1. PRODUCT

This product complies with Part 15 o the FCC Rules. Operation is subjectto the ollowing two conditions: (1) this product may not cause harm ulinter erence, and (2) this product must accept any inter erence received,including inter erence that may cause undesired operation.

2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCTThis product, when installed as indicated in the instructions containedin this manual, meets FCC requirements. Modifcation not expresslyapproved by DENON may void your authority, granted by the FCC, to use

the product.

3. NOTEThis product has been tested and ound to comply with the limits ora Class B digital device, pursuant to Part 15 o the FCC Rules. Theselimits are designed to provide reasonable protection against harm ulinter erence in a residential installation.This product generates, uses and can radiate radio requency energy and,i not installed and used in accordance with the instructions, may causeharm ul inter erence to radio communications. However, there is noguarantee that inter erence will not occur in a particular installation. I thisproduct does cause harm ul inter erence to radio or television reception,which can be determined by turning the product OFF and ON, the useris encouraged to try to correct the inter erence by one or more o the

ollowing measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the product into an outlet on a circuit di erent rom that to

which the receiver is connected. Consult the local retailer authorized to distribute this type o product or

an experienced radio/TV technician or help.

For Canadian customers:This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numrique de la classe B est con orme la norme NMB-003 duCanada.

Hotsur ace

mark


4/88

III

ESPAOLFRANCAISENGLISH

n NOTES ON USE / OBSERVATIONS RELATIVES A LUTILISATION / NOTAS SOBRE EL USO

WARNINGS AVERTISSEMENTS ADVERTENCIAS Avoid high temperatures.

Allow or su fcient heat dispersion wheninstalled in a rack.

Handle the power cord care ully.Hold the plug when unplugging the cord.

Keep the unit ree rom moisture, water, anddust.

Unplug the power cord when not using the unitor long periods o time.

Do not obstruct the ventilation holes. Do not let oreign objects into the unit. Do not let insecticides, benzene, and thi nner

come in contact with the unit. Never disassemble or modi y the unit in any way. Ventilation should not be impeded by covering

the ventilation openings with items, such asnewspapers, tablecloths or curtains.

Naked ame sources such as lighted candlesshould not be placed on the unit.

Observe and ollow local regulations regardingbattery disposal.

Do not expose the unit to dripping or splashinguids.

Do not place objects flled with liquids, such asvases, on the unit.

Do not handle the mains cord with wet hands. When the switch is in the OFF position, t he

equipment is not completely switched o romMAINS.

The equipment shall be installed near thepower supply so that the power supply is easilyaccessible.

Eviter des tempratures leves.Tenir compte dune dispersion de chaleursu fsante lors de linstallation sur une tagre.

Manipuler le cordon dalimentation avecprcaution.Tenir la prise lors du dbranchement du cordon.

Protger lappareil contre lhumidit, leau et lapoussire.

Dbrancher le cordon dalimentation lorsquelappareil nest pas utilis pendant de longuespriodes.

Ne pas obstruer les trous daration. Ne pas laisser des objets trangers dans

lappareil. Ne pas mettre en contact des insecticides, du

benzne et un diluant avec lappareil. Ne jamais dmonter ou modifer lappareil dune

manire ou dune autre. Ne pas recouvrir les orifces de ventilation avec

des objets tels que des journaux, nappes ourideaux. Cela entraverait la ventilation.

Ne jamais placer de amme nue sur lappareil,notamment des bougies allumes.

Veillez respecter les lois en vigueur lorsquevous jetez les piles usages.

Lappareil ne doit pas tre expos leau ou lhumidit.

Ne pas poser dobjet contenant du liquide, parexemple un vase, sur lappareil.

Ne pas manipuler le cordon dalimentation avecles mains mouilles.

Lorsque linterrupteur est sur la position OFF,lappareil nest pas compltement dconnect duSECTEUR (MAINS).

Lappareil sera install prs de la sourcedalimentation, de sorte que cette dernire soit

acilement accessible.

Evite altas temperaturas.Permite la sufciente dispersin del calor cuandoest instalado en la consola.

Maneje el cordn de energa con cuidado.Sostenga el enchu e cuando desconecte elcordn de energa.

Mantenga el equipo libre de humedad, agua ypolvo.

Desconecte el cordn de energa cuando noutilice el equipo por mucho tiempo.

No obstruya los orifcios de ventilacin. No deje objetos extraos dentro del equipo. No permita el contacto de insecticidas, gasolina

y diluyentes con el equipo. Nunca desarme o modifque el equipo de

ninguna manera. La ventilacin no debe quedar obstruida por

haberse cubierto las aperturas con objetos comoperidicos, manteles o cortinas.

No debern colocarse sobre el aparato uentesin amables sin proteccin, como velasencendidas.

A la hora de deshacerse de las pilas, respete lanormativa para el cuidado del medio ambiente.

No exponer el aparato al goteo o salpicaduras

cuando se utilice. No colocar sobre el aparato objetos llenos de

lquido, como jarros. No maneje el cable de alimentacin con las

manos mojadas. Cuando el interruptor est en la posicin OFF, el

equipo no est completamente desconectado dela alimentacin MAINS.

El equipo se instalar cerca de la uente dealimentacin de manera que resulte cil accedera ella.

n CAUTIONS ON INSTALLATIONPRCAUTIONS DINSTALLATIONEMPLAZAMIENTO DE LA INSTALACIN

z z

z

WallParoiPared

z

z For proper heat dispersal, do not install this unit in a confnedspace, such as a bookcase or similar enclosure. More than 0.3 m (12 in.) is recommended. Do not place any other equipment on this unit. z Pour permettre la dissipation de chaleur requise, ninstallezpas cette unit dans un espace confn tel quune bibliothqueou un endroit similaire. Une distance de plus de 0.3 m (12 po) est recommande. Ne placez aucun matriel sur cet appareil. z Para la dispersin del calor adecuadamente, no instale esteequipo en un lugar confnado tal como una librera o unidadsimilar. Se recomienda dejar ms de 0.3 m (12 pulg.) alrededor. No coloque ningn otro equipo sobre la unidad.


5/88

1

ENGLISH

B a s i c v e r s i o n

A d v

a n

c e d v e r s i o n

S i m

p l e v e r s i o n

I n f o r m

a t i o n

Thank you or purchasing this DENON product. To ensure proper operation, please read these owners manual care ully be ore using the product.A ter reading them, be sure to keep them or uture re erence.

Getting started

AccessoriesCheck that the ollowing parts are supplied with the product.

q Owners manual ...................................................................... 1w Warranty ( or North Ameri ca model only) ................................1e Service network list .................................................................1r Remote control unit (RC-1146) ................................................1t R6/AA batteries .......................................................................2y Setup microphone

(DM-A409, Cord length: Approx. 19.7 t / 6.0 m) .................... 1u AM loop antenna ( or HD Radio broadcasts) ........................... 1i FM indoor antenna ( or HD Radio broadcasts) ........................1

r u iy

About this manual n Operation buttonsThe operations described in this manual are based mainly onremote control operation.

n Symbolsv This symbol indicates a re erence page on which

related in ormation is described.

This symbol indicates a supplementary in ormationand tips or operations.

NOTE This symbol indicates points to remember operationsor unction limitations.

n IllustrationsNote that the illustrations in these instructions are or explanationpurposes and may di er rom the actual unit.

Simple version (Simple setup guide) 3

Basic version 12Connections 13

Important in ormati on 13Connecting an HDMI-compatible device 14Connecting a TV16Connecting a Blu-ray Disc player / DVD player 16Connecting a set-top box (Satellite tuner/cable TV) 17Connecting a digital camcorder 17Connecting a control dock or iP od 18Connecting an iPod or USB memory device to the USB Port 18Connecting a CD player 19Connecting an antenna 19Connecting an external control device 20

Playback (Basic operation) 20Important in ormati on 20Playing a Blu-ray Disc player/DVD player 21Playing a CD player 21Playing an iPod 22Tuning in radio stations 25Playing a USB memory device 27

Selecting a listening mode (Surround mode) 28Standard pl ayback 28DENON original surround playback 30

Stereo playback 30Direct playback 30Pure direct playback30

Advanced version 31Speaker installation/connection (Other than 5.1-channel) 32

Install 32Connect 33

Set up speakers 35Playback (Advanced operation) 36Convenient unctions 36

Playback in ZONE2 (Separate room) 39q ZONE2 playback by speaker output 39w ZONE2 playback by audio output 39Playback 39Quick select unction 40

How to make detailed settings 41Menu map 41Examples o on-screen display and ront display 42Inputting characters 43Input Setup 44Audio Adjust 49Manual Setup54

In ormation 61Operating the connected devices by remote control unit 62

Operating AV equipment 62Registering preset codes 62Operating c omponents 64Speci ying the zone used with the remote control unit 65Resetting the remote control unit 65

In ormation66Part names and unctions 67

Front panel 67Display 67Rear panel 68Remote control unit 69

Other in ormation 71Trademark in ormation 71Surround 72Explanation o terms 76

Troubleshooting 78Resetting the microprocessor 80

Specifcations 80

ContentsGetting started 1

Accessories 1About this manual 1Features 2Cautions on handling 2


6/88


7/88

Simpleversion

3

ENGLISH


A d v

a n

c e d v e r s i o n

I n f o r m

a t i o n

S i m

p l e v e r s i o n

Simple version (Simple setup guide)Here, we explain the entire setup procedure, rom unboxing the unit to using it in a home theater.The Simple version describes the installation, connection and setup methods or 5.1-channel speakers.See page 32 or the installation, connection and setup methods or speakers other than 5.1-channel speakers.

n Before connecting the unit, turn off the power to all devices.

n For operation of the connected devices, refer to the user manuals for each device.

Play backdisc

(v page 11)

Enjoy Blu-ray Disc and DVDin surround sound.

5

Set upspeakers

(v page 6)

Use the setup microphone(DM-A409) included withthe product, or automaticsetup.

4

Turn onpower

(v page 6)

3

Connect(v page 4)

Connect 5.1-channelspeakers, a TV and Blu-ray Disc player equippedwith an HDMI connector.

2

Install(v page 4)

Enjoy better audio, usingthe correct install method.

1

Set up speakers (Audyssey Auto Setup)

FinishStep 5Store

Step 4Check

Step 3Calculating

Step 2Measurement

Step 1SpeakerDetection

Preparation


8/88

4

ENGLISH

NOTE Connect so that the speaker cable core wires

do not protrude rom the speaker terminal.The protection circuit may be activated i thecore wires touch the rear panel or i the + and sides touch each other ( v page 77 ProtectionCircuit).

Never touch the speaker terminals while thepower supply is connected. Doing so couldresult in electric shock.

Use speakers with the speaker impedancesshown below.

Speaker terminals SpeakerimpedanceFRONT

6 16 CENTERSURROUNDSURR.BACK / AMP ASSIGN

Install 1 2 4 53

This unit can per orm 2.0/2.1 to 7.1-channel surround playback.Here, we explain setup using the example o 5.1-channel speakerplayback.

FL FRSW

C

SL SR

120

22 30

Listening position

FL Front speaker (L) Install the surround speakers in aposition 2 to 3 t (60 to 90 cm) higherthan ear level.

2 3 t /

60 90 cm

Frontspeaker

Surroundspeaker

GViewed rom the side H

FR Front speaker (R)C Center speakerSW Subwoo erSL Surround speaker (L)SR Surround speaker (R)

1 Connect 1 2 4 532

The Simple version describes the installation, connection and setup methods or 5.1-channel speakers.See page 32 or the installation, connection and setup methods or speakers other than 5.1-channel speakers.

Speakers

Care ully check the le t (L) and right (R)channels and + (red) and (black) polaritieson the speakers being connected to the

this unit, and be sure to interconnect thechannels and polarities correctly.

Connecting the speaker cablesPeel o about 0.03 t/10 mm o sheathing romthe tip o the speaker cable, then either twist thecore wire tightly or terminate it.

When using a banana plugTighten the speaker terminal frmly be oreinserting the banana plug.


9/88

5

ENGLISH


A d v

a n

c e d v e r s i o n

I n f o r m

a t i o n

S i m

p l e v e r s i o n

Blu-ray Disc player and TV

Use only an HDMI (High Defnition Multimedia Inter ace) cable that bears the HDMIlogo (a certifed HDMI product). Using a cable without the HDMI logo (an uncertifedHDMI product) may result in abnormal playback.

When outputting Deep Color or 1080p, etc., we recommend you use a High SpeedHDMI cable or a High Speed HDMI cable with Ethernet or enhanced high-qualityplayback.

INHDMI

OUTHDMI

To household power outlet(AC 120 V, 60 Hz)

Power cord

TV

Blu-ray Disc player

HDMI cable(sold separately)

HDMI cable(sold separately)

NOTE Do not plug in the power cord until all connections have been completed. Do not bundle power cords together with connection cables. Doing so can result in humming or noise.

Connect

FL FR

C

SL SR

SW

Speaker cables(sold separately)

Audio cable(sold separately)

Subwoo erwith built-inamplifer



10/88

6

ENGLISH

Set up speakers(Audyssey Auto Setup) 1 2 4 53

4


The acoustic characteristics o the connected speakers and listening room aremeasured and the optimum settings are made automatically. This is calledAudyssey Auto Setup.To per orm measurement, place the setup microphone in multiple locations all

around the listening area. For best results, we recommend you measure in sixpositions, as shown in the illustration (up to six positions). When per orming Audyssey Auto Setup, MultEQ /Dynamic EQ /Dynamic

Volume unctions become active ( v page 51, 52). To set up the speakers manually, use Speaker Setup ( v page 54) on the menu.

NOTE Make the room as quiet as possible. Background noise can disrupt the room measurements. Close

windows, silence cell phones, televisions, radios, air conditioners, uorescent lights, home appliances,light dimmers, or other devices as measurements may be a ected by these sounds.

Cell phones should be placed away rom all audio electronics during the measurement process as RadioFrequency Inter erence (RFI) may cause measurement disruptions (even i the cell phone is not in use).

Do not unplug the setup microphone rom the main unit until Audyssey Auto Setup is completed. Do not stand between the speakers and setup microphone or all ow obstacles in the path while the

measurements are being made. This will cause inaccurate readings. Loud test sounds may be played during Audyssey Auto s etup. This is part o

normal operation. I there is background noise in room, these test signals willincrease in volume.

Operating VOLdf during the measurements will cancel the measurements. Measurement cannot be per ormed when headphones are connected.

Turn on power 1 2 4 533

1 Turn on the TV and subwooferpower.

Power on

2 Change the TV input to the input of this unit.3 Press POWER ONto turn on power

to the unit.The power indicator ashes green and thepower turns on.

Power on

Power on


11/88

7

ENGLISH

B

a s i c v e r s i o n

A d v

a n

c e d v e r s i o n

I n f o r m

a t i o n

S i m

p l e v e r s i o n

About setup microphone placement

Measurements are per ormed by placing the setup microphonesuccessively at multiple positions throughout the entire listeningarea, as shown in GExample q H. For best results, we recommendyou measure in six positions, as shown in the illustration (up to sixpositions).

Even i the listening environment is small as shown in GExample w H,measuring at multiple points throughout the listening environmentresults in more e ective correction.

FL SW C FR

SRSL * M

FL SW C FR

SRSL * M

( : Measuring positions)

GExample q H GExample w H

( : Measuring positions)

FL Front speaker (L) SW Subwoo erFR Front speaker (R) SL Surround speaker (L)C Center speaker SR Surround speaker (R)

About the main listening position (*M)The main listening position is the position where listeners wouldnormally sit or where one would normally sit alone within the listeningenvironment. Be ore starting Audyssey Auto Setup, place the setupmicrophone in the main listening position. Audyssey MultEQ usesthe measurements rom this position to calculate speaker distance,level, polarity, and the optimum crossover value or the subwoo er.



1 Set up the microphoneMount the setup microphone on a tripod or standand place it in the main listening position.When placing the setup microphone, adjust the height o thesound receptor to the level o the listeners ear.

Sound receptorSetupmicrophone

NOTE Do not hold the setup microphone in your hand during

measurements. Avoid placing the setup microphone close to a seat back or wall as

sound re ections may give inaccurate results.

2 Set up the subwooferIf using a subwoofer capable of the followingadjustments, set up the subwoofer as shown below.

n When using a subwoofer with a direct modeSet the direct mode to On and disable the volume adjustmentand crossover requency setting.

n When using a subwoofer without a direct modeMake the ollowing settings:

Volume : 12 oclock position Crossover requency :

Maximum/Highest Frequency Low pass flter : O Standby mode : O

3 Set up the remote control unit n Set up the zone mode

Press ZONE SELECTto switch the zone mode toMAIN.The MAIN indicator lights.

Press ZONE SELECT

n Set up the operation modePress AMP to set the remote control unit to ampli eroperation mode.

Press AMP


12/88

8

ENGLISH


Preparation

If Cancel is selectedCancel Auto Setup? is displayed on the TVscreen. I Yes is selected, Audyssey AutoSetup closes.

NOTEI Caution is displayed:Go to Error messages ( v page 10), checkany related items, and per orm the necessaryprocedures.I the problem is resolved, return and restartAudyssey Auto Setup.

When performing Audyssey AutoSetup over againPress ui to select Retry, and then pressENTER.

When measuring has stoppedq Press ui to select Cancel, then press

ENTER.w Press o p to select Yes, then press ENTER.

Setting up the speakers againRepeat the operation rom step 4 o Preparation

.

Remote control operationbuttons

Move the cursor(Up/Down/Le t/Right)

Confrm the setting Return to previous menu

Step 1Speaker Detection

Step 2Measurement

6 The detected speakers are displayed.

NextRetry

[ENT]:Next

Front Sp. :YesCenter Sp. :YesSubwoofer :YesSurround Sp. :Yes

Step1:Speaker DetectionMultEQ

NOTEI a connected speaker is not displayed, thespeaker may not be connected correctly. Check

the speaker connection.

7 Use ui to select Next and thenpress ENTER.

8 Move the setup microphone toposition 2, use ui to select Next,and then press ENTER.The measurement o the second positionstarts. Measurements can be made in up tosix positions.

Step2:MeasurementMultEQ

Please place microphone

Cancel

[ENT]:Next

Next

Calculate

2nd listening position.at ear height at

I you want to omit measurements rom the nextposition onward, select Calculate.(Go to Step 3 Calculating )

9 Repeat step 8, measuring positions 3to 6.When measurement o position 6 iscompleted, a All the measurements werefnished. message is displayed.

Step2:MeasurementMultEQ

RetryCancel

[ENT]:Calculate

Calculate

All the measurementswere finished.

4 Connect the setup microphone to theSETUP MIC jack of this unit.

3-1.Audyssey Auto SetupMultEQ

at ear height at

ZONE2

Amp Assign:

StartCancel

[ENT]:Select [RTN]:Back

Please place microphone

main listening position.

When the setup microphone isconnected, the ollowing screen isdisplayed.

Here, we explain setup using the example o5.1-channel speaker playback.For settings other than 5.1-channel surround,select Amp Assign and per orm steps 3 to 4 oSet up speakers ( v page 35).

5 Use ui to select Start and thenpress ENTER.When measuring begins, a test tone isoutput rom each speaker.

Measurement requires several minutes.

In step 1, you will per orm measurements at the main listening position. This step automatically checks the speaker confguration and speaker size, and calculates the channel

level, distance, and crossover requency. It also corrects distortion in the listening area.

In step 2, you will per orm measurements atmultiple positions (two to six positions) other thanthe main listening position.

You can achieve a more e ective correction o

distortion within the listening area by per ormingmeasurements at multiple positions.


13/88

9

ENGLISH

B


A d v

a n

c e d v e r s i o n

I n f o r m

a t i o n

S i m

p l e v e r s i o n

11 Use ui to select the item you wantto check, and then press ENTER.

Step4:CheckMultEQ

Please check the results

of the measured item.

Distance CheckChannel Level CheckCrossover Freq.Check

Speaker Config.Check

Next[ENT]:Select

Subwoo ers may measure a greater reporteddistance than the actual distance due to addedelectrical delay common in subwoo ers.

I you want to check another item, pressRETURN.

12 Use ui to select Next and thenpress ENTER.


Step 3Calculating

Step 4Check

13 Use ui to select Store and thenpress ENTER.Save the measurement results.

Step5:StoreMultEQ

StoringPlease wait...

[----------]

Step5:StoreMultEQ

StoreCancel

[ENT]:Store

Please select Storeto store measurementvalues.

Saving the results requires about 10 seconds. I you do not wa nt to save t he measurement

results, use ui to select Cancel, then selectYes using o p . All the measured AudysseyAuto Setup data will be erased.

NOTEDuring saving o measurement results, be surenot to turn o the power.

14 Unplug the setup microphone fromthe units SETUP MIC jack.

15Set Dynamic Volume.

FinishMultEQ

Storing complete.Auto Setup is now

Turn on Dynamic Volume?

Yes : No

finished.

[ ]:Select [ENT]:Exit

For details o Dynamic Volume settings, seepage 52.

n When turning Dynamic Volume on Use o to select Yes, and then press ENTER.

The unit automatically enters Evening mode.n When turning Dynamic Volume off

Use p to select No, and then press ENTER.




NOTE I the result di ers rom the actual connection

status, or i Caution! is displayed, see Errormessages ( v page 10). Then carry out AudysseyAuto Setup again.

I the result still di ers rom the actual connectionstatus a ter remeasurement or the error messagestill appears, it is possible that the speakersare not connected properly. Turn this unit o ,check the speaker connections and repeat themeasurement process rom the beginning.

I you change speaker positions or orientation,

per orm Audyssey Auto Setup again to fnd theoptimal equalizer settings.

Step 5Store

10 On the Step 2 screen, use ui to select Calculate, and then pressENTER.Measuring results are analyzed, and the

requency response o each speaker in thelistening room is determined.

Step3:CalculatingMultEQ

Calculating

[----------]

Please wait...

Analysis takes several minutes to complete. Thetime required or this analysis depends on thenumber o speakers connected.The more connected speakers there are, thelonger it takes to per orm analysis.

Finish

NOTEA ter per orming Audyssey Auto Setup, do notchange the speaker connections or subwoo ervolume. In event o a change, per orm AudysseyAuto Setup again.


14/88

10

ENGLISH

Parameter CheckThis unction enables you to check the measurement results andequalizer characteristics a ter Audyssey Auto Setup.

1 Use ui to select Parameter Check and thenpress ENTER.

2 Use ui to select the item you want to check, thenpress ENTER.

3-2.Parameter Check

Speaker Config.CheckDistance ChenckChannel Level CheckCrossover Freq.Check

Restore

EQ Check

[ENT]:Select [RTN]:Back

Speaker Con g. Check

Distance Check

Channel Level Check

Crossover Freq. Check

EQ Check

Check the speaker confguration.

Check the distance.

Check the channel level.

Check the crossover requency.

Check the equalizer.

I EQ Check is selected in step 2, press ui to select equalizingcurve (Audyssey or Audyssey Flat) to be checked.Use o p to switch the display between the di erent speakers.

3 Press RETURN.The confrmation screen reappears. Repeat steps 2 and 3.Retrieving Audyssey Auto Setup settingsI you set Restore to Yes, you can return to Audyssey Auto Setupmeasurement result (value calculated at the start by MultEQ ) evenwhen you have changed each setting manually.

Error messagesAn error message is displayed i Audyssey Auto Setup could not be completed due to speaker placement, the measurement environment, etc.I this happens, check the relevant items, be sure to take the necessary measures, then per orm Audyssey Auto Setup over again.

NOTEBe sure to turn o the power be ore checking speaker connections.

Examples Error details Measures

or

RetryCancel

[ENT]:Retry

F Microphone:None

Speaker :None

CautionMultEQ

The connected setup microphone is broken, or a

device other than the supplied setup microphoneis connected. Not all speakers could be detected. The ront L speaker was not properly detected.

Connect the included setup microphone to the

SETUP MIC jack o this unit.

Check the speaker connections.

too high or

RetryCancel

[ENT]:Retry

F Ambient noise is

Level is too low.

CautionMultEQ

There is too much noise in the room or accuratemeasurements to be made.

Speaker or subwoo er sound is too low oraccurate measurements to be made.

Either turn o any device generat ing noise ormove it away.

Per orm again when the surroundings are quieter. Check the speaker installation and the direction

in which the speakers are acing. Adjust the subwoo ers volume.

Retry

R :None

CancelSkip

Front

Caution

[ ]:Up/Down [ ]:CH

MultEQ The displayed speaker could not be detected. Check the connections o the displayed speaker.

Retry

L :Phase

CancelSkip

Front

Caution

[ ]:Up/Down [ ]:CH

MultEQ The displayed is connected with the polari ties

reversed. Check the polarities o the displayed speaker. For some speak ers, this error message may

be displayed even i the speaker is properlyconnected. I you are sure the connection iscorrect, press ui to select Skip, then press

ENTER.




G S


15/88

11

ENGLISH

B


A d v

a n

c e d v e r s i o n

I n f o r m

a t i o n

S i m

p l e v e r s i o n

Play back disc 1 2 4 535




1 Press BDto switch an input sourcefor a player used for playback.

2 Play the component connected tothis unit.Make the necessary settings on theplayer (language setting, subtitlessetting, etc.) be orehand.

3 Adjust the sound volume.VOLd Volume upVOLf Volume downMUTE Muting

4 Set the listening mode.Set the listening mode according to the playback contents(cinema, music, etc.) or according to your liking ( v page 28Selecting a listening mode (Surround mode)).

When power is switched to standbyPress POWER OFF.

GPower indicator status in standby mode H Normal standby : O When HDMI Control is set to ON : Red

You can also switch the power to standby bypressing ON/STANDBYon the main unit.

NOTEDuring power standby, a minimal amount o power is consumed. Tototally cut o the power, remove the power cord rom the poweroutlet.

ENGLISH


16/88

Basicversion

12

ENGLISH

F Connections v page 13F Playback (Basic operation) v page 20F Selecting a listening mode (Surround mode) v page 28

n Refer to the pages indicated below for information on connecting and playing back the various

media and external devices.Audio and video PlaybackConnection

TV v page 14, 16 Blu-ray Disc player v page 14, 16 v page 21DVD player v page 14, 16 v page 21Set-top box (Satellite tuner or cable TV) v page 14, 17 Game console v page 14 Digital camcorder v page 17 Control dock or iPod v page 18 v page 22

Audio PlaybackConnection

iPod v page 18 v page 24USB memory device v page 18 v page 27HD Radio receiver v page 19 v page 25CD player v page 19 v page 21

For speaker connections, see page 4.

Basic versionHere, we explain the connections and basic operation methods or this unit.

ENGLISH


17/88

13

ENGLISH

A d v

a n

c e d v e r s i o n

S i m

p l e v e r s i o n

I n f o r m

a t i o n

B


Converting input video signals for output (Video conversion function)This unit is equipped with our types o video input connectors (HDMI, Component video, S-Video andvideo) and two types o video output connectors (HDMI and video).Use the connectors corresponding to the components to be connected.This unction automatically converts va rious ormats o video signals input to this unit into the ormats usedto output the video signals rom this unit to a monitor.

GFlow o video signals or MAIN ZONEH

HDMI connector

Component videoconnectors

S-Video connector

Video connector

Monitor

HDMI connector

Component videoconnectors

S-Video connector

Video connector

HDMIconnector

Video connector

HDMI connector

Video connector

Video deviceThis unit

OutputInput(IN)

Output(MONITOR OUT) Input

Set when changing the resolution o the video signal.Resolution (v page 47)

in Set as Necessary

Connections

The video conversion unction supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60ormats.

The resolution o the video signal input to this units HDMI connector is the one set at Resolution(v page 47) (1080p HDMI signals and 1080p component signals are output at 1080p, regardless o thesetting).

Resolutions o HDMI-compatible TVs can be checked at HDMI Monitor In ormation ( v page 61).

NOTE HDMI signals cannot be converted into analog signals.

When a non-standard video signal rom a game machine or some other source is input, the videoconversion unction might not operate. Component video input signals cannot be converted into Video ormat.

Important information Make connections as ollows be ore using this unit. Select an appropriate connection type

according to the components to be connected. You may need to make some settings on this unit depending on the connection method. Re er to

each description or more in ormation. Select the cables (sold separately) according to the components being connected.

NOTE Do not plug in the power cord until all connections have been completed. When making connections, also re er to the operating instructi ons o the other components being

connected. Be sure to connect the le t and right channels properly (le t with le t, right with right).

Do not bundle power cords together with connection cables. Doing so can result in noise.

ENGLISH


18/88

14

ENGLISH

Connecting an HDMI-compatible deviceYou can connect up to fve HDMI-compatible devices to the unit.

HDMI functionThis unit supports the ollowing HDMI unctions: 3D Deep Color ( v page 76) Auto Lip Sync ( v page 57) x.v.Color, sYCC601 color, Adobe RGB color, Adobe YCC601color ( v page 76, 77) High defnition digital audio ormat

ARC (Audio Return Channel) Content Type CEC (HDMI control)

Copyright protection systemIn order to play back digital video and audio such as BD-Video or DVD-Video via HDMI connection, boththis unit and TV or the player need to support the copyright protection system known as HDCP (High-bandwidth Digital Content Protection System). HDCP is copyright protection technology comprised odata encryption and authentication o the connected AV device. This unit supports HDCP. I a device that does not support HDCP is connected, video and audio are not output correctly. Read

the owners manual o your television or player or more in ormation.

About HDMI cables When a device supporting Deep Color signal trans er is connected, use a cable compatible High Speed

HDMI cable or High Speed HDMI cable with Ethernet When the ARC unction is used, connect a device with a Standard HDMI cable with Ethernet or HighSpeed HDMI cable with Ethernet or HDMI 1.4.

HDMI control function (v page 36)This unction allows you to operate external devices rom the receiver and operate the receiver romexternal devices.

NOTE The HDMI control unction may not work depending on the device it is connected to and its settings. You cannot operate a TV or Blu-ray Disc player / DVD player that is not compatible with the HDMI control

unction.

About 3D functionThis unit supports input and output o 3D (3 dimensional) video signals o the HDMI 1.4 standards, Forplaying the 3D video content, a player, and a TV that support the 3D unction o the HDMI 1.4 standardsare required in addition to this unit.

How the on-screen display appears in accordance with the videoinput signalThe way the on-screen display o the menus, status, etc., is dis played di ers according to the type o videosignal input to this unit.

n When video signals are input from the HDMI or component videoconnector

Menu: Switches to a screen with a black background and the menu is superimposed z .

Status display : Not displayed. z I you want to display the menus superi mposed on the background image, input the same video signal sto the video connectors. When a menu is displayed, the picture switches to the one being input romthe video connectors and the menu is displayed superimposed over this picture.

n When video signals are input from the S-Video or video connector Menu: Menus are displayed superimposed over the background image. Status display: Displayed.

Examples of on-screen display Menu screen Status display screen

When the input source isswitched

When the volume is adjusted

MENU

1.Audio Adjust2.Information3.Auto Setup4.Manual Setup5.Input Setup

[ENT]:SelectMODE:STEREOIN :DVD

[Auto]

Master Volume -80.0dB

Status display: The operating stat us appears bri e y on the screenwhen the input source is switched or the volume ischanged.

Important information

ENGLISH


19/88

15

ENGLISH

A d v

a n

c e d v e r s i o n

S i m

p l e v e r s i o n

I n f o r m

a t i o n

B


About ARC (Audio return channel) functionThe Audio Return Channel in HDMI 1.4 enables a TV, via a single HDMI cable, to send audio dataupstream to this unit.

NOTE To enable the ARC unction,set HDMI Control to ON ( v page 57). When connecting a TV that does not support the ARC unction, a separate connection using an audio

cable is required. In this case, re er to Connecting a TV ( v page 16) or the connection method.

About Content TypeThe HDMI Specifcation Version 1.4 enables simple, automated picture setting selection with no userintervention.

NOTETo enable the Content type, set Video Mode to Auto ( v page 47).

Cables used for connectionsAudio and video cable (sold separately)

HDMI cable

This inter ace allows trans er o digital video signals and digital audio signals over a single HDMI cable.

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

IN

HDMI

Blu-ray Discplayer DVD player TVSet-top box

Gameconsole

Connecting an HDMI-compatible device

When this unit is connected to other devices with HDMI cables, connect this unit and TV also with anHDMI cable.

When connecting a device that supports Deep Color transmission, please use a High Speed HDMIcable or High Speed HDMI cable with Ethernet.

Video signals are not output i the input video signals do not match the monitors resolution. In this case,switch the Blu-ray Disc/DVD players resolution to a resolution with which the monitor is compatible.

When this unit and monitor are connected with an HDMI cable, i the monitor is not compatible withHDMI audio signal playback, only the video signals are output to the monitor.

NOTEThe audio signal rom the HDMI output connector (sampling requency, number o channels, etc.) may belimited by the HDMI audio specifcations o the connected device regarding permissible inputs.

Connecting to a device equipped with a DVI-D connectorWhen an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted toDVI signals, allowing connection to a device equipped with a DVI-D connector.

NOTE No sound is output when connected to a device equipped with a DVI-D connector. Make separate audio

connections. Signals cannot be output to DVI-D devices that do not support HDCP. Depending on the combination o devices, the video signals may not be output.

n Settings related to HDMI connectionsSet as necessary. For details, see the respective re erence pages.

Input Assign (v page 46)Set this to change the HDMI input connector to which the input source is assigned.

HDMI Setup (v page 57)Make settings or HDMI video/audio output. Auto Lip Sync HDMI Audio Out HDMI Control Standby Source

Power O Control

NOTEThe audio signals output rom the HDMI connectors are only the HDMI input signals.

ENGLISH


20/88

16

ENGLISH

Connecting a TV Select the connector to use and connect the device. For video connections, see Converting input video si gnals or output (Video conversion uncti on)

(v page 13). For instructions on HDMI connections, see Connecting an HDMI-compatible device ( v page 14).

To listen to TV audio through this device, use the optical digital connection.

NOTE

This connection is not required when a TV compatible with the ARC unction (Audio Return Channel (HDMI1.4 standard unction)) is connected to this unit via an HDMI connection.For details, see About ARC (Audio return channel) unction ( v page 15) or re er to the instruction ma nual

or your TV.

Cables used for connectionsVideo cable (sold separately)

Video cable (Yellow)

Audio cable (sold separately)

Optical cable

IN

VIDEO

VIDEO

AUDIO

OPTICAL

OUT

TV

Set this to change the digital input connector to which the input source is assigned.Input Assign (v page 46)

in Set as Necessary

Connecting a Blu-ray Disc player / DVD player You can enjoy video and audio rom a Blu-ray Disc or DVD. Select the connector to use and connect the device. For instructions on HDMI connections, see Connecting an HDMI-compatible device ( v page 14).




Audio cable(White)

(Red) R

L

R

L

RL

RL

RL

RL

VIDEO AUDIO

AUDIO

RL

OUT

AUDIO

AUDIO

RL

OUT OUT

VIDEO

Blu-ray Discplayer DVD player


in Set as Necessary

For HD audio (Dolby TrueHD, DTS-HD, Dolby Digital Plus and DTS Express) playback, connect with HDMI(v page 14 Connecting an HDMI-compatible device).

ENGLISH


21/88

17

ENGLISH

A d v

a n

c e d v e r s i o n

S i m

p l e v e r s i o n

I n f o r m

a t i o n


Connecting a set-top box (Satellite tuner/cable TV) You can watch satellite or cable TV. Select the connector to use and connect the device. For instructions on HDMI connections, see Connecting an HDMI-compatible device ( v page 14).



Componentvideo cable

(Green)

(Blue)

(Red)

Audio cables (sold separately)

Audio cable(White)

(Red) R

L

R

L

Coaxialdigital cable

(Orange)

RL

RL

VIDEO AUDIO

AUDIO

RL

OUTOUT

VIDEOCOMPONENT VIDEO

Y P B P R

OUT OUT

COAXIAL

Satellite Tuner/Cable TV

Set this to change the digital input connector or component video input connector to which the inputsource is assigned.Input Assign (v page 46)

in Set as Necessary

Connecting a digital camcorder You can enjoy video and audio rom a digital camcorder. For instructions on HDMI connections, see Connecting an HDMI-compatible device ( v page 14).




Audio cable(White)

(Red) R

L

R

L

RL

RL

OUT

AUDIOVIDEO

VIDEO AUDIO

RL

OUT

Digital camcorder


in Set as Necessary

You can enjoy games by connecting a game machine via the V.AUX input connector. In this case, set the

input source to V.AUX.NOTE

When a non-standard video signal rom a game machine or some other source is input, the video conversionunction might not operate. In this case, use the monitor output o the same connector as the input.

ENGLISH


22/88

18

ENGLISH

Connecting a control dock for iPod Connect a control dock or iPod to the unit to enjoy video and music stored on an iPod. For a control dock or iPod, use ASD-1R, ASD-11R, ASD-3N, ASD-3W, ASD-51N and ASD-51W made by

DENON (sold separately). For instructions on the contr ol dock or iPod settings, re er to the control dock or iPods operating

instructions.

R L

R L

ASD-51N

Control dock or iPod

Use the AV/ControlCable supplied withthe DENON control

dock or iPod.


in Set as Necessary

You can also connect the iPod you are using directly to the USB port o this unit ( v page 18 Connectingan iPod or USB memory device to the USB Port).

Connecting an iPod or USB memory device to the USBPort

You can enjoy music, stored on an iPod or USB memory device.

Cables used for connectionsTo connect an iPod to this unit, use the USB cable supplied with the iPod.

USB memorydevice

iPod

or

When you want to playback a video fle stored on an iPod, use a DENON control dock or iPod (ASD-1R,ASD-11R, ASD-3N, ASD-3W, ASD-51N and ASD-51W, sold separatel y) ( v page 18 Connecting a controldock or iPod).

With iPods, playbac k is possible with iPhone, iPod touch, clas sic and nano released rom the 5th-generationo iPods. For details, check the DENON web site or page 24.

DENON does not guarantee that all USB memory devices will operate or receive power. When usinga portable USB connection type HDD o the kind to which an AC adapter can be connected to supplypower, use the AC adapter.

NOTE USB memory devices will not work via a USB hub. Do not use an extension cable when connecting a USB memory device. This may cause radi o inter erence

with other devices.

ENGLISH


23/88

19

ENGLISH

A d v

a n

c e d v e r s i o n

S i m

p l e v e r s i o n

I n f o r m

a t i o n


Connecting a CD player You can enjoy CD sound. Select the connector to use and connect the device.

Cables used for connectionsAudio cable (sold separately)

Audio cable(White)

(Red) R

L

R

L

RL

RL

AUDIO

AUDIO

RL

OUT

CD player

Set this to change the digital input connector to which the inputsource is assigned.Input Assign (v page 46)

in Set as Necessary

Connecting an antennaConnecting an HD Radio receiver By connecting a HD Radio antenna to this unit, you can receive HD

Radio programs. HD Radio broadcasting currentry is available in the United States and

select other countries.

w eq

FM outdoorantenna

Direction o broadcasting station

75 coaxialcable

GroundAM outdoor

antenna

AM loop antenna( or HD Radio broadcasting,

supplied) To prevent inter erence, installat least 3.3 t/1 m away rom theantenna connected to the thisunits other AM tuner terminal.

Black

White

FM indoorantenna

( or HD Radiobroadcasting,

supplied)

n Using the AM loop antennaTo use suspended on a wallSuspend directly on the wall withoutassembling.

Nail, tack, etc.

To use standing aloneUse the procedure below to assemble.

n AM loop antenna assembly

1 Put the stand sectionthrough the bottom of theloop antenna from therear and bend it forward.

Stand

Squarehole

Projectingpart

Loopantenna

2 Insert the projecting partinto the square hole inthe stand.

NOTE Do not connect two FM antennas simultaneously. Even i an external AM antenna is used, do not disconnect the AM

loop antenna. Make sure the AM loop antenna lead terminals do not touch metal

parts o the panel. I the signal has noi se inter erence, connect the ground termi nal

(GND) to reduce noise. I you are unable to receive a good broadcast signal, we recommend

installing an outdoor antenna. For details, inquire at the retail storewhere you purchased the unit.

ENGLISH


24/88

20

ENGLISH

Playback (Basic operation)

n Playing a Blu-ray Disc player/DVD player(v page 21)

n Playing a CD player (v page 21) n Playing an iPod (v page 22) n Tuning in radio stations (v page 25) n Playing a USB memory device (v page 27)

Selecting a listening mode (Surround mode)(v page 28)

n Selecting the input source (v page 20) n Adjusting the master volume (v page 21) n Turning off the sound temporarily (v page 21)

Playback (Advanced operation) (v page 36)

Important informationBe ore starting playback, make the connections between the di erentcomponents and the settings on the receiver.

NOTEAlso re er to the operating instructions o the connected componentswhen playing them.

Selecting the input sourcePress the input source select button(NET/USB, iPod , DVD, BD, TUNER,DOCK, SAT/CBL, GAME, V.AUX, CD,TV) to be played back.The desired input source can be selecteddirectly. When iPod PLAY is pressed, the input

source o this unit is switched to DOCKor USB/iPod and the connected iPod isautomatically played ( v page 25 iPod play

unction).

You can also use the ollowing operation to select an inputsource.

n Using the Source Select menuq Press SOURCE SELECT.

Display the Source Select menu.

BDCD

DVDTV

GAMESAT/CBL

V.AUXDOCK

HD Radio

Source Select

[ENT]:Select[ ]:Source

The currently selected input sourceis highlighted.

w Use uio p to select the input source,then press ENTER.The input source is set and the sourceselection menu is turned o .

When using with an iPod connected directly to the USB port o thisunit, select USB/iPod or the input source.

Input sources that are not going to be used can be set ahead o time.Make this setting at Source Delete ( v page 59).

To turn o the source selection menu wi thout selecting an inputsource, press SOURCE SELECTagain.

n Using the knob on the main unitTurn SOURCE SELECT. Turning SOURCE SELECTswitches

the input source, as shown below.

BD DVD TV SAT/CBL GAME

V.AUXUSB/iPod DOCKHD RadioCD

Connecting an external controldevice

REMOTE CONTROL jacksI this unit is installed in a location that is out o range o the signal

rom the remote control unit, you can still operate the unit and thedevices connected to it by using a commercially available IR receiver.You can also use it to remotely control ZONE2 (another room).

AUXOUT

Device equipped with aREMOTE CONTROL IN jack

In raredretransmitter In raredsensor

OutputInput

ENGLISH


25/88

21

ENGLISH

A d v

a n

c e d v e r s i o n

S i m

p l e v e r s i o n

I n f o r m

a t i o n


Adjusting the master volumeUse VOLdf to adjust the volume.

n When the Volume Display setting(v page 59) is RelativeGAdjustable range H

80.5dB 18.0dB

n When the Volume Display setting ( v page 59) isAbsoluteGAdjustable range H 0.0 99.0

The variable range di ers according to the input signal and channellevel setting.

You can also operate via the main unit.In this case, per orm the ollowingoperations.Turn MASTER VOLUMEto adjust thevolume.

Turning off the sound temporarilyPress MUTE.

The sound is reduced to the level set at Mute Level ( v page 59). To cancel , press MUTE again. Muting can also be canceled by

adjusting the master volume.

Important information Playing a Blu-ray Disc player/DVDplayer

The ollowing describes the procedure or playing Blu-ray Disc player/ DVD player.

1 Prepare for playback.q Turn on the power o the TV,subwoo er and player.

w Change the TV input to the input othis unit.

e Load the disc in the player.

2 Press POWER ON to turn onpower to the unit.

3 Press BD or DVD to switch aninput source for a player used forplayback.

4 Play the component connected to this unit.Make the necessary settings on the player (language setting,subtitles setting, etc.) be orehand.

Playing a CD playerThe ollowing describes the procedure or playing CD player.

1 Prepare for playback.q Turn on the power o thesubwoo er and player.

w Load the disc in the player.


3 Press CD to switch the inputsource to the CD player.

4 Play the component connected to this unit.

ENGLISH


26/88

22

Playing an iPod There are two methods or iPod playback.

q Use a DENON Control dock or iPod to play back.You can play back both video, photo and audio.

w Connect an iPod directly to the USB port to play back.You can play back audio only.

q Use a DENON control dock for iPod toplay back

DENON Control dock or iPod usable on this unit ASD-1R/ASD-11R/ASD-3N/ASD-3W/ASD-51N/ASD-51W

n Listening to music on an iPod

1 Prepare for playback.q Connect the DENON control dock or iPod to this unit(v page 18 Connecting a control dock or iPod).

w Set the iPod in the DENON control dock or iPod.

2 Press POWER ONto turn on power to the unit.

3 Press DOCKto switch the input source to DOCK. I Browse mode is selected in step 4, the ollowing screen is

displayed on a TV screen, depending on the connected controldock or iPod.

ArtistsAlbumsSongsGenresComposers

Playlists

Music

[ 1/6 ]

GWhen using an ASD-1R H GWhen using an ASD-11R H

VideosMusic

iPod

[ 1/2 ]

iPod

MusicVideo

U p/ Do wn S el e ct

GWhen using an ASD-3N, ASD-3W, ASD-51N and ASD-51W H

In Browse mode, the iPod display is asshown at right.

NOTEI the connections screen is not displayed,the iPod may not be properly connected.Reconnect it.

OK to disconnect.

4 Press SEARCHand hold it down for 2 seconds ormore to select the display mode.

There are two modes or displaying the contents recorded on the

iPod.Browse mode Display iPod in ormation on the TV screen.

English letters, numbers and certain symbols are displayed.Incompatible characters are displayed as . (period).

Remote mode Display iPod in ormation on the iPod screen. Remote iPod or Dock Remote is displayed on the display

o this unit.

Display mode B rowse mode Remote mode

Playablefles

Music fle P P

Photo fle P z 2

Video fle P z 1 P z 2

Activebuttons

Remotecontrol unit(This unit)

P P

iPod P

z 1 When using an ASD-11R, ASD-3N, ASD-3W, ASD-51N or ASD-51W DENONcontrol dock or iPod.

z 2 Video may not be output, depending onthe combination o ASD-1R, ASD-11R,ASD-3N, ASD-3W, ASD-51N or ASD-51W DENON control dock or iPod andiPod.

5Use ui to select the item, thenpress ENTERor p to select the

le to be played.

6 Press ENTER, p or 1 .Playback starts.

You can speci y the duration o the on-sc reen display to be displayed(de ault: 30 sec) at menu iPod ( v page 59). Press uio p toreturn to the original screen.

To play back compressed audio with extended bass or treblereproduction, we recommend playback in RESTORER mode(v page 53). The de ault setting is Mode 3.

In Browse mode, press STATUS duringplayback to check the title name, artistname, and album name.

NOTE Press POWER OFFand set this units power

to the standby mode be ore disconnectingthe iPod. Also switch the input source toDOCK be ore disconnecting the iPod.

Depending on the type o iP od and the so tware vers ion, someunctions may not operate.

Note that DENON will accept no responsibility whatsoever or anyproblems arising with the data on an iPod when using this unit inconjunction with the iPod.

n Viewing videos on an iPod in the Browse

modeWhen an iPod equipped with a video unction is connected to aDENON ASD-11R, ASD-3N, ASD-3W, ASD-51N and ASD-51Wcontrol dock or iPod, image fles can be played in the Browsemode.

1 Use ui to select Videos, thenpress ENTERor p .

2 Use ui to select the search itemor folder, then press ENTERor p .

3 Use ui to select the video le, then press ENTER, p or 1 .Playback starts.

ENGLISH


27/88

23

A d v

a n

c e d v e r s i o n

S i m

p l e v e r s i o n

I n f o r m

a t i o n


Playing an iPod

n Viewing photos and videos on an iPod in theRemote modeThis unit can play back on a TV screen photos and data stored on aniPod equipped with a slide show or video unction.

1 Press and hold SEARCHto set theRemote mode.Remote iPod or Dock Remote isdisplayed on the display o this unit.

2 Watching the iPods screen, use ui to selectPhotos or Videos.

Depending on the iPod model, it may be necessary to operate theiPod unit directly.

3 Press ENTERuntil the image you want to view isdisplayed.

TV Out at the iPods Slide show Settings or Video Settingsmust be set to On in order to display the iPods photo data or videos

on the monitor. For details, see the iPods operating instructions.NOTE

Video may not be output, depending on the combination o ASD-1R,ASD-11R, ASD-3N, ASD-3W, ASD-51N or ASD-51W and iPod.

n iPod operationOperation buttons Function

MENU Amp menuuio p Cursor operation

ENTER Enter settingSEARCH

(Press and release)Page search modez 1

SEARCH(Press and hold)

Browse / Remote mode switching

RETURN Return6 7

(Press and hold)Manual search

(fast-reverse/fast-forward)1 Playback / Pause

8 9 Auto search (cue)3 Pause2 Stop

RESTORER RESTORERMEMORY Store memoryz 2

TV POWER TV power on/standby (Default : SONY)TV INPUT Switch TV input (Default : SONY)

Repeat playback (v page 48 Repeat)

Shu ing playback (v page 48 Shu e) z 1 This unctions when an ASD-1R or ASD-11R is

used.z 2 This unctions when an ASD-3N, ASD-3W, ASD-

51N or ASD-51W is used.

ENGLISH


28/88

24

Playing an iPod

4 Press SEARCHand hold it down for 2 seconds ormore to select the display mode.

There are two modes or displaying the contents recorded on theiPod.

Browse mode Display iPod in ormation on the TV screen. English letters, numbers and certain symbols are displayed.

Incompatible characters are displayed as . (period).

Remote mode Display iPod in ormation on the iPod screen. Remote iPod is displayed on the display o this unit. The Remote mode is not supported on f th generation iPod or

frst generation iPod nano.

Display mode B rowse mode Remote mode

Playablefles

Music fle P P

Video fle z

Activebuttons

Remotecontrol unit(This unit)

P P

iPod P

z Only the sound is played.

5 Use ui to select the item, then press ENTERor p to select the le to be played.

6 Press ENTER, p or 1 .Playback starts.

You can speci y the duration o the on-sc reen display to be displayed(de ault: 30 sec) at menu iPod ( v page 59). Press uio p toreturn to the original screen.


In Browse mode, press STATUS duringplayback to check the title name, artistname, and album name.

NOTE Depending on the type o iP od and the so tware vers ion, some

unctions may not operate. Note that DENON will accept no responsibility whatsoever or any

problems arising with the data on an iPod when using this unit inconjunction with the iPod.

n iPod operationOperation buttons Function

MENU Amp menuuio p Cursor operationENTER Enter setting

SEARCH(Press and release)

Page search mode

SEARCH(Press and hold)

Browse / Remote mode switching

RETURN Return6 7

(Press and hold)Manual search

(fast-reverse/fast-forward)1 Playback / Pause

8 9 Auto search (cue)3 Pause

2 StopRESTORER RESTORERTV POWER TV power on/standby (Default : SONY)TV INPUT Switch TV input (Default : SONY)

Repeat playback (v page 48 Repeat) Shu ing playback (v page 48 Shu e)

w Connect an iPod directly to the USB port to play back

You can use the USB cable provided with the iPod to connect theiPod with the units USB port and enjoy music stored on the iPod. This unit supports a udio playback rom the iPod (f th generation

or later), iPod nano, iPod classic, iPod touch and iPhone (it is notcompatible with iPod shu e).

1Connect the iPod to the USB port ( v page 18Connecting an iPod or USB memory device to theUSB Port).


3 Press NET/USB to switch theinput source to USB/iPod.

ArtistsAlbumsSongs

Genres

Composers

Playlists

iPod

[ 1/9 ][SRCH]:Page

Podcasts

NOTEI the connections screen is not displayed,the iPod may not be properly connected.Reconnect it.

ENGLISH


29/88

25

A d v

a n

c e d v e r s i o n

S i m

p l e v e r s i o n

I n f o r m

a t i o n


Tuning in radio stationsImportant information

n Using the HD Radio receiverHD Radio stations o er higher sound quality than conventionalFM/ AM broadcasts. It is also possible to receive data services andselect broadcasts rom among up to eight multicast programs.HD Radio technology provides higher quality sound thanconventional broadcasts and allows reception o data services. FM sounds as sensational as CDs AM sounds as rich as analog FM stereo A variety o data services, i ncluding text-based in ormation,

song title, artist name, album name, genre, etc. can be received.Furthermore, in addition to conventional broadcasts, with HDRadio broadcasting it is possible to choose rom up to 8 multicastprograms.For detailed in ormation on HD Radio technology, please go towww. ibiquity.com.

Listening to HD Radio stations

1 Press TUNERto switch the inputsource to HD Radio.

2 Press BAND to select FM orAM.FM When listening to an FM broadcast.

AM When listening to an AM broadcast.

3 Tune in the desired broadcaststation.q To tune in automatically

(Auto tuning)Press MODEto light the HD-AUTO or AUTO indicat or on thedisplay, then use TUNINGd or TUNINGf to select the stationyou want to hear. The indicator lights on the display when an HD Radio

station is tuned in. When HD-AUTO (tuning mode) is selected, only HD Radiostations are tuned in.

I AUTO (tuning mode) is selected, both HD Radio and anal ogstations are tuned in.

w To tune in manually (Manual tuning)Press MODEto turn o the displays AUTO indicator, then useTUNINGd or TUNINGf to select the station you want to hear.

I the desired station cannot be tuned in with auto tuning, tune it inmanually.

When tuning in stat ions manually, pres s and hold TUNINGd orTUNINGf to change requencies continuously.

The time (de ault : 30 sec) or which the on-screen display aredisplayed can be set at menu HD Radio ( v page 59). Press uio p to return to the original screen.

n Selecting audio programsHD Radio Technology enables stations to broadcast multiple AudioProgram and data services on HD2 / HD3 / HD4 channels.

Press ui to select the audioprogram.I the station you are listening to has multipleaudio programs, HD1 is indicated on thedisplay. I it only has one audio program,HD is indicated.

iPod play functionI iPod PLAYis pressed when power o this unit is on standby and acontrol dock or iPod or an iPod is connected, the iPod starts playback.

Press iPod PLAY. Power o this unit is turned on. This units input s ource s witches to

DOCK or USB/iPod. iPod playback starts.

I iPod PLAY on the main unit ispressed, the same unction as with theremote control unit can be obtained.

NOTE iPod play unction does not unction i a control dock or iPod

(DOCK) or an iPod (USB/iPod) is not connected. I both a control dock or iPod (DOCK) and an iPod (USB/iPod)

are connected, playback with control dock or iPod (DOCK) takespriority.

Playing an iPod

ENGLISH


30/88

26

Tuning in radio stations

n Listening to preset stations

1 Press SHIFTto select the memoryblock (A to G).

2 Press CH +, CH or 1 8 to selectthe desired preset channel.

You can also operate via the main unit.In this case, perform the followingoperations.Press TUNING PRESET, then turn SOURCESELECTto select the preset radio station.

n Direct frequency tuningYou can enter the receiving frequency directly to tune in.

1 Press SEARCH.

2 Input frequencies using the 0 9. If o is pressed, the immediately preceding

input is cancelled.

3 When setting is completed, pressENTER.The preset frequency is tuned in.

n Check the HD Radio reception information

Press STATUSwhile an HD Radiobroadcast is being received.The current reception information isshown on the display.

Normal

Genre name

Album name

Artist name

Frequency

Signal strength

Station name

Program and Program type

Title name

NOTEIf the station signal weakens while receiving a digital broadcast (whiletext is displayed), the mode automatically switches to the analogreception mode (the reception frequency is displayed).Because of this, the text may icker if the station signal level is weakand unstable.

n Tuner (HD Radio reception) operation

Operation buttons FunctionCH +, Preset channel selectionMENU Amp menu

uio pCursor operation /

Multicast switching (ui )ENTER Enter

SEARCH Direct frequency tuningRETURN ReturnBAND FM/AM switchingMODE Switch search modes

TUNINGdf Tuning (up/down)

0 9Preset channel selection (1 8) /

Direct frequency tuning (0 9)SHIFT Preset channel block selection

MEMORY Preset memory registrationTV POWER TV power on/standby (Default : SONY)TV INPUT Switch TV input (Default : SONY)

n Presetting radio stations (Manual preset)Your favorite broadcast stations can be preset so that you can tunethem in easily. Multicasts can also be preset. Up to 56 stations canbe preset.

Stations can be preset automatically at Auto Preset(v page 45). If Auto Preset is performed after performing ManualPreset, the Manual Preset settings will be overwritten.

1 Tune in the broadcast station youwant to preset.2 Press MEMORY.

3 Press SHIFTto select the block (Ato G) in which the channel (1 to 8per a block) is to be preset, thenpress CH +, CH or 1 8 to selectthe preset number.

4 Press MEMORYagain to completethe setting.

To preset other stations, repeat steps 1 to

4.

Default settingsBlock (A G)

andChannel (1 8)

Default Settings

A1 A887.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 / 100.1 MHz

B1 B8101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1

/ 90.1 MHz

C1 C8530 / 600 / 930 / 1000 / 1120 / 1210 / 1400 / 1710 kHz

D1 D8 90.1 MHzE1 E8 90.1 MHzF1 F8 90.1 MHzG1 G8 90.1 MHz

Specify a name for the preset broadcast station(Preset Name) (v page 46)

ENGLISH


31/88

27

A d v

a n

c e d v e r s i o n

S i m

p l e v e r s i o n

I n f o r m

a t i o n


Playing a USB memory devicePlaying back music fles recorded on a USB memory device.

Important information

n USB memory devicesA USB memory device can be connected to the USB port o thisunit to play music fles stored on the USB memory device. Only USB memory devices con orming to mass storage cl ass can

be played on this unit.

This unit is compatible with USB memory devices in FAT16 orFAT32 ormat.

GCompatible ormats HUSB memory devices z 1

WMA(Windows Media Audio) P z 2MP3 (MPEG-1 Audio Layer-3) PMPEG-4 AAC P z 3

z 1 USB This unit is compatible with MP3 ID3-Tag (Ver. 2) standards. This unit is compatible with WMA META tags.

z 2 Copyright-protected fles can not be played.z 3 Only fles that are not protected by copyright can be played on

this unit.

Also, fles encoded in WMA ormat when ripped rom a CD, etc.on a computer may be copyright protected, depending on thecomputers settings.

GCompatible ormats HSampling

requency Bit rate Extension

WMA(WindowsMedia Audio)

32/44.1/48 kHz 48 192 k bps .wma

MP3 (MPEG-1Audio Layer-3)

32/44.1/48 kHz 32 320 k bps .mp3

MPEG-4 AAC 32/44.1/48 kHz 16 320 k bps .m4a

Playing les stored on USB memorydevices

1 Connect the USB memory deviceto the USB port ( v page 18Connecting an iPod or USBmemory device to the USBPort).

2 Press NET/USB to switch theinput source to USB/iPod.

3 Press ui to select the searchitem or folder, then press ENTER or p .

4 Press ui to select the le, thenpress ENTER, p or 1 .Playback starts.

You can speci y the duration o the on-sc reen display to be displayed(de ault: 30 sec) at menu USB ( v page 59). Press uio p toreturn to the original screen.


I the USB memory device is divided into multiple partitions, only thetop partition can be selected.

This unit is compatible with MP3 fles con orming to MPEG-1 AudioLayer-3 standards.

NOTE Note that DENON will accept no responsibility whatsoever or any

problems arising with the data on a USB memory device when using

this unit in conjunction with the USB memory device. USB memory devices will not work via a USB hub. DENON does not guarantee that al l USB memory devices will

operate or be supplied power. When using a USB portable hard diskthat can draw power rom an AC adapter, we recommend using theAC adapter.

It is not possible to connect and use a computer via the USB port othis unit using a USB cable.

n USB operationOperation buttons Function

MENU Amp menuuio p Cursor operation

ENTER Enter settingSEARCH Page SearchRETURN Return

6 7(Press and hold)

Manual search(fast-reverse/fast-forward)

1 Playback8 9 Auto search (cue)

3 Pause2 Stop

RESTORER RESTORERTV POWER TV power on/standby (Default : SONY)TV INPUT Switch TV input (Default : SONY)

Repeat playback (v page 48 Repeat) Shu ing playback (v page 48 Shu e)

ENGLISH


32/88

28

Standard playback n Surround playback of 2-channel sources

1 Playing the source ( v page 21 27).

2Press STANDARDto select thesurround decoder to play back multichannel sound.

Each time STANDARDis pressed, the surround mode is switched.Which decoder can be selected depends on the settings o AmpAssign ( v page 54) or Speaker Confg. ( v page 54).

DOLBY PLg z z 1 This mode is or 7.1-channel surround playbackusing the ront height speakers. PL g z Height is displayed.

DOLBY PLg x z 2 This mode is or 7.1-channel or 6.1-channelsurround playback using the surround backspeakers. PL g x Cinema, PL g x Musicor PL g x Game

is displayed.

DOLBY PLg This mode is or 5.1-channel surround playback.Select this mode i no ront height speaker norsurround back speaker is to be used. PL g Cinema, PL g Music, PL g Game or

Pro Logic is displayed.

DTS NEO:6 This mode is or 7.1-channel, 6.1-channel or5.1-channel surround playback using the surroundback speakers. DTS NEO:6 Cinema or DTS NEO:6 Music is

displayed.

z 1 This can be selected when Amp Assign is set to Front

Height or Speaker Confg. Front Height is not set toNone.z 2 This can be selected when Amp Assign is set to Normal or

Speaker Confg. S.Back is not set to None.

Selecting a listening mode (Surround mode)This unit can play input audio signals in multi-channel surround mode or in stereo mode.Select a listening mode suitable or the playback contents (cinema, music, etc.) or according to your liking.

Listening ModeInput audio

signal Playback Listening mode

2-channel

Multi channelSurround

Standard playback(v page 28)

For 2-channel signal input: Surround-channel signals are created and played with surround playback.

For multichannel signal input: The surround signal recorded in source is played as surround playback.(The sound is played according to the settings o the speaker size inSpeaker Confg. ( v page 54).)

Surround-back-channel or ront-height-channel si gnals that are notrecorded in source can be created.

2-channel

Multi channelSurround

DENON originalsurround playback

(v page 30)

The surround e ects suitable or the source type or according to yourliking can be selected rom the DENON original sound mode and is used

or playback.

2-channel

Multi channelStereo

Stereo playback(v page 30)

I multichannel signals are input, they are mixed down to 2-channel audioand are played.

Subwoo er signals are also output.

2-channel

Multi channel

Stereo

Surround

Direct playback(v page 30)

Sound recorded in source is played as is. Surround back signals or ront height signals are not created. In this mode, the ollowing items cannot be adjusted.

Tone ( v page 51) MultEQ (v page 51) Dynamic EQ (v page 52) Dy nami c Vol ume ( v page 52) RESTORER ( v page 53)

2-channel

Multi channel

Stereo

Surround

Pure direct playback(v page 30)

This mode is or playback in higher sound quality than in Direct playbackmode. The ollowing circuits that a ect sound quality are set to o . Main units display circuit (The display is turned o .) Analog video input/output circuit

Some listening modes cannot be selected, depending on the audio ormat or number o channels o the inputsignal. For details, see Types o input signals, and corresponding surround modes ( v page 74).

Adjust the sound feld e ect with the menu Surround Parameter ( v page 49) to enjoy your avorite soundmode.

You can select the listening mode by pressing SURROUND MODE0 or SURROUND MODE1 on the main unit.Press SURROUND MODE0 or SURROUND MODE1 and the modes are switched as shown below.

z Set the Pure direct mode using theremote control unit.

DIRECT STEREO STANDARD MULTI CH STEREO ROCK ARENA

MONO MOVIE JAZZ CLUBVIDEO GAMEMATRIXVIRTUAL

ENGLISH


33/88

29

A d v

a n

c e d v e r s i o n

S i m

p l e v e r s i o n

I n f o r m

a t i o n


3 Select the mode corresponding to the playback contents with the menu Surround Parameter Mode ( v page 49) to enjoy your favorite soundmode.

Cinema This mode is suited or movie sources.

Music This mode is suited or music sources. More soundis sent to the ront speakers than in Cinemamode.

Game This mode is suited or games.

Pro Logic This mode is suitable or playback o 2-channelsources recorded with Dolby Pro Logic.

Height z This mode is or the surround decoder DolbyPLg z. I the surround decoder is Dolby PL g z,another mode cannot be selected.

I the menu Surround Parameter Front Height ( v page 50) isset to ON, the mode is switched to Height mode.

n Surround playback of multi-channel sources(Dolby Digital, DTS etc.)

1 Playing the source ( v page 21 27).2 Press STANDARDto select the

surround decoder to play back multichannel sound.

Select the surround mode while viewing the display on thescreen ( v Displaying the currently playing surround modeat right).

Which decoder can be selected depends on the input signal,the settings o Amp Assign ( v page 54) or Speaker Confg.(v page 54).

Displaying the currently playing surround modeInput signal Surround mode Display

DOLBY DIGITAL(other than 2ch) / DOLBY DIGITAL EX

DOLBY DIGITAL DOLBY DIGITALDOLBY DIGITAL EX DOLBY DIGITAL EXDOLBY DIGITAL + PL g xCINEMA

DOLBY D PL x C

DOLBY DIGITAL + PL g x MUSIC DOLBY D PL x MDOLBY DIGITAL + PL g z HEIGHT DOLBY D PL z

DOLBY DIGITAL Plus

DOLBY DIGITAL Plus DOLBY DIGITAL +DOLBY DIGITAL Plus + EX DOLBY D + EXDOLBY DIGITAL Plus + PL g xCINEMA

DOLBY D + PL x C

DOLBY DIGITAL Plus + PL g xMUSIC

DOLBY D + PL x M

DOLBY DIGITAL Plus + PL g zHEIGHT

DOLBY D + PL z

DOLBY TrueHD

DOLBY TrueHD DOLBY TrueHDDOLBY TrueHD + EX DOLBY HD EXDOLBY TrueHD + PL g x CINEMA DOLBY HD PL x CDOLBY TrueHD + PL g x MUSIC DOLBY HD PL x MDOLBY TrueHD + PL g z HEIGHT DOLBY HD PL z

DTS (5.1ch) / DTS-ES Discrete 6.1 / DTS-ES Matrix 6.1 / DTS 96/24

DTS SURROUND DTS SURROUNDDTS + PL g x CINEMA DTS PL x CDTS + PL g x MUSIC DTS PL x MDTS + PL g z HEIGHT DTS PL zDTS + NEO:6 DTS NEO:6DTS ES MTRX6.1 z 1 DTS ES MTRX6.1DTS ES DSCRT6.1 z 2 DTS ES DSCRT6.1DTS 96/24 z 3 DTS 96/24

DTS-HD

DTS-HD HI RES DTS-HD HI RESDTS-HD MSTR DTS-HD MSTRDTS-HD + NEO:6 DTS-HD NEO:6DTS-HD + PL g x CINEMA DTS-HD PL x CDTS-HD + PL g x MUSIC DTS-HD PL x MDTS-HD + PL g z HEIGHT DTS-HD PL zDTS Express DTS Express

PCM (multi ch)

MULTI CH IN MULTI CH INMULTI IN + Dolby EX MULTI Dolby EXMULTI IN + PL g x CINEMA MULTI IN PL x CMULTI IN + PL g x MUSIC MULTI IN PL x MMULTI IN + PL g z HEIGHT MULTI IN PL zMULTI CH IN 7.1 MULTI CH IN 7.1

z 1 This is displayed when the input signal is DTS-ES Matrix 6.1 and this units AFDM(v page 50) setting is ON.

z 2 This is displayed when the input signal is DTS-ES Discrete 6.1.z 3 This is displayed when the input signal is DTS 96/24.

Standard playback

GViews on the display H

q w

q Shows a decoder to be used. A DOLBY DIGITAL Plus decoder is displayed

as DOLBY D +.w Shows a decoder that creates sound output

rom the surround back speakers.

+ P L g z indicates the ront height soundrom ront height speakers.

For an input signal that can be reproduced ineach surround mode, see Surround modes andsurround parameters ( v page 72).

ENGLISH


34/88

30

DENON original surround playback1 Playing the source ( v page 21 27).2 Press SIMULATIONto select the

surround mode.

Each time SIMULATIONis pressed, thesurround mode is switched.

MULTI CH

STEREO

This mode is or enjoying stereo sound rom all

speakers.ROCK ARENA This mode is or enjoying the atmosphere o a live

concert in an arena.JAZZ CLUB This mode is or enjoying the atmosphere o a live

concert in a jazz club.MONO MOVIEz This mode is or playing monaural movie sources

with surround sound.VIDEO GAME This mode is suited or achieving surround sound

with video games.MATRIX This mode lets you add a spacious eel to stereo

music sources.VIRTUAL This mode is or enjoying surround e ects using

only the ront speakers or headphones.z When playing sources recorded in monaural in the MONO

MOVIE mode, the sound will be o balance with a singlechannel (le t or right), so input to both channels.

Depending on the program source being played, it may not be possibleto achieve a satis actory surround e ect. In this case, try other modesto achieve a sound feld suited to your tastes.

NOTEWhen the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HDor DTS Express, you cannot select DENON original surround mode.

Stereo playbackThis is the mode or playing in stereo. The tone can be adjusted. Sound is output rom the ront le t and right speakers and subwoo er. I multichannel signals are input, they are mixed down to 2-channel

audio and are played.

1 Playing the source ( v page 21 27).2 Press D/STto select STEREO.Stereo playback begins.

Direct playbackSound recorded in source is played as is. Surround back signals or ront height signals are not created. In this mode, the ollowing items cannot be adjusted.

Tone ( v page 51) MultEQ (v page 51) Dynamic EQ (v page 52) Dynamic Volume ( v page 52) RESTORER ( v page 53)

1Playing the source ( v page 21

27).

2 Press D/STto select DIRECT.Direct playback begins.

Pure direct playbackThis mode is or playback in higher sound quality than in Directplayback mode. The ollowing circuits that a ect sound quality are set to o .

Main units display circuit (The display is turned o .) Analog video input/output circuit

Documents

IBJSC.com | I-WEB.com.vn - 953472190