Upload
duongkhanh
View
214
Download
2
Embed Size (px)
Citation preview
Ferdinand Schad KGSteigstraße 25-27
D-78600 KolbingenTelephone +49 (0) 74 63 - 980 - 0
Fax +49 (0) 74 63 - 980 - [email protected]
Ventilation grilleIB
Contents
Construction subject to change. No return possible!
Ventilation Grille Model IB
01/03 - 2 07.09.2017Version:
Description ........................................................................................................................................3Construction .............................................................................................................................................................................. 3Model ......................................................................................................................................................................................... 3Accessories ................................................................................................................................................................................ 3Fastening ................................................................................................................................................................................... 3
Models and dimensions .........................................................................................................................4Dimensions ................................................................................................................................................................................ 4Dimensions of accessories ........................................................................................................................................................ 5Band design ............................................................................................................................................................................... 8Fastening methods ..................................................................................................................................................................... 8
Technical data ....................................................................................................................................9Pressure loss and noise level ..................................................................................................................................................... 9Maximum end velocity of jet .................................................................................................................................................... 11Jet path .................................................................................................................................................................................... 12Critical throw ........................................................................................................................................................................... 13Maximum penetration .............................................................................................................................................................. 14Temperature and induction ratios ............................................................................................................................................ 15Minimum distances ................................................................................................................................................................. 16Correction factor (for scattered air jet) ..................................................................................................................................... 16Blade position .......................................................................................................................................................................... 16
Legend ........................................................................................................................................... 17Order details .................................................................................................................................... 18Specification texts .............................................................................................................................. 19
Ventilation Grille Model IB
01/03 - 3
Construction subject to change. No return possible!
07.09.2017Version:
DescriptionSupply and return air grille type IB with front-side horizontal orvertical pivoting air deflection blades.Frame and blades made of stove-enamelled sheet steel colourRAL 9010 (white) or of electrolytically galvanised sheet steel.Assembly parts made of electrolytically galvanised sheet steel.Fastened with screw mounting. At an extra charge, a plenumbox can be mounted (only available without hit-and-miss damp-er). The damper in the connection piece of the plenum box (byadditional charge) serves for easy air volume regulation.
Construction
Model
Accessories
Fastening
Frame and blades- Sheet steel painted to RAL 9010 (white) (standard)- Galvanised sheet steel- Sheet steel painted to a different RAL colour.
IB 1 - Horizontal front side pivoting air deflection bladesIB 2 - same as IB 1, additionally with vertical air deflection
bladesIB 8 - same as IB 1, additionally with hit-and-miss damperIB 8c - same as IB 1, additionally with vertical air deflection
blades and hit-and-miss damperIB 10 - Vertical front side pivoting air deflection bladesIB 11 - same as IB 10, additionally with horizontal air deflec-
tion bladesIB 15 - Same as IB 10, additionally with hit-and-miss damperIB 16 - Same as Ib 10, additionally with horizontal air deflec-
tion blades and hit-and-miss damper
Plenum box (-ASK)- Electrolytically galvanised sheet steel (only possible with-
out hit-and-miss damper)Damper (-DK)
- in plenum box- Throttle damper made of galvanised sheet steel- Damper fastening made of plastic
Rubber lip seal (-GD)- Special rubber, on plenum box adapter
Mounting frame (-E1)- Electrolytically galvanised sheet steel
Internal insulation (-Ii)- thermal insulation at the inside of the plenum box
External insulation (-Ia)- thermal insulation at the outside of the plenum box
Screw mounting (-SM)- Standard, screws must be provided on site
Concealed mounting (-VM)- at an extra charge
Ventilation Grille Model IB
01/03 - 4
Construction subject to change. No return possible!
07.09.2017Version:
Models and dimensionsDimensionsIB 1
IB 1 / IB 2 / IB 8 / IB 8c:with intermediate web for lengths from 825 (see page 7)
All models consist of basic type IB 1 :IB 2
IB 8
IB 8c
Available sizes IB 1 / IB 2 / IB 8 / IB 8c
All combined lengths and heights available!Other sizes available on request.
IB 10
IB 11 / IB 16:with intermediate web for lengths from 825 (see page 7)
All models consist of basic type IB 10 :IB 11
IB 15
IB 16
Available sizes IB 10 / IB 11 / IB 15 / IB 16
All combined lengths and heights available!Other sizes available on request.
L L1 L2 L3 H H1 H2 H3325 350 307 310 75 110 57 60425 450 407 410 125 160 107 110525 550 507 510 175 210 157 160625 650 607 610 225 260 207 210825 850 807 810 325 360 307 3101025 1050 1007 10101225 1250 1207 1210
Indentation for slotted shallow-raised counter-sunk-head tapping screw DIN ISO 7051 pitch 3.9 (on-site)
L L1 L2 L3 L4 H H1 H2 H3325 350 307 309 310 75 110 56 60425 450 407 409 410 125 160 106 110525 550 507 509 510 175 210 156 160625 650 607 609 610 225 260 206 210825 850 807 809 810 325 360 306 310
1025 1050 1007 1009 10101225 1250 1207 1209 1210
Indentation for slotted shallow-raised counter-sunk-head tapping screw DIN ISO 7051 pitch 3.9 (on-site)
Ventilation Grille Model IB
01/03 - 5
Construction subject to change. No return possible!
07.09.2017Version:
Dimensions of accessoriesPlenum box (-ASK) with lateral connection spigot (-AS1)for IB 1 / IB 2 / IB 10 / IB 11
Grilles cannot be fitted with a hit-and-miss damper if a plenumbox is attached, i.e. it can either be fitted with a hit-and-missdamper or a plenum box.
Detail X
Fixing lug only with concealed
outs
ide
With fixing lugs
Concealed plates can be bent outwards, if necessary.
Ventilation Grille Model IB
01/03 - 6
Construction subject to change. No return possible!
07.09.2017Version:
Available sizes ASK -AS1 Spigot arrangement
Dimensions and prices for connecting piece from above (-AS2) and connecting piece front side (-AS3) upon request.
Insulation for plenum boxinternal (-Ii)
external (-Ia)
L H KL H1 KH Ød325
75
320
68
210 123425 420525 520625 620825 820
245 1581025 10201225 1220
L H KL H1 KH Ød325
125
320
118
245 158425 420525 520625 620825 820
285 1981025 10201225 1220
L H KL H1 KH Ød325
175
320
168 285 198
425 420525 520625 620825 820
1025 10201225 1220
L H KL H1 KH Ød325
225
320
218
285 198425 420525 520625 620
335 248825 820
1025 10201225 1220
L H KL H1 KH Ød325
325
320
318
335 248425 420525 520625 620
400 313825 820
1025 10201225 1220
- Lateral connecting piece (-AS1, standard)- Connecting piece from above (-AS2) - Connecting piece front side (-AS3)
Ventilation Grille Model IB
01/03 - 7
Construction subject to change. No return possible!
07.09.2017Version:
Damper (-DK)
Rubber lip seal (-GD)
Detail X
Mounting frame (-E1)
Length L < 825 mm - 4 wall anchorslength L > 825 mm = 6 wall anchorsMounting frames are only delivered with wall anchors on specialrequest (at an extra charge).
Mounting frame for band design2-part, BL < 2025
Multi-part, BL > 2025
Mounting frames for grille bands are supplied with plug-in con-nections. Assembly webs are additionally attached, they caneasily be removed with a turn, once the grille is walled in. Allmounting frames are supplied without wall anchors as standard.Wall anchors available at extra cost.
When ordering a plenum box (-ASK)with throttle damper (-DK), the boxheight (KH) will differ by 40 mm.
KH with DK = KH + 40 mm
Wall anchor
Wall anchor
(End piece) (End piece)
Assembly rail
Plug-in connection
Wall anchor
Sections 1020 mmEnd piece 1/2 difference End piece 1/2 difference
Assembly rail
Plug-in connection
Ventilation Grille Model IB
01/03 - 8
Construction subject to change. No return possible!
07.09.2017Version:
Band designGrille types IB 10, IB 11, IB 15 and IB 16 are available as ventilation grille bands.Ventilation grille bands can be supplied with screw mounting (SM) only.
Ventilation grille band 2-part, BL < 2025
Ventilation grille band, multi-part, BL > 2025
Fastening methodsUnless stated otherwise, the ventilation grilles of the IB series will be supplied with screw mounting
Screw mounting (SM) Concealed mounting (VM, at an extra charge)The ventilation grilles of the IB series are delivered at an extracharge with concealed mounting (VM). For concealed mounting(VM) without mounting frame E 1 VM 12 is standard.Concealed screw mounting VM 11 is only possible with mount-ing frame or plenum box. The mounting frame must be orderedseparately.
End piece < 425 mm:- 4 indentations for on-site slotted shallow-
raised countersunk-head tapping screwsEnd piece > 425 mm:- 6 indentations for on-site slotted shallow-
raised countersunk-head tapping screws
Section:- 6 indentations for on-site slotted shallow-
raised countersunk-head tapping screws
Indentation for slotted shallow-raised countersunk-head tapping screw
= (end piece) = (end piece)
Sections 1020 mmEnd piece 1/2 differ- End piece 1/2 differ-Indentation for slotted shallow-raised countersunk-head tapping screw
L=325-425
L=825-1225
L=525-625
Indentation for slotted shallow-raised countersunk-head tapping screw DIN ISO 7051 pitch 3.9 (on site)
Intermediate rail(only for IB grilleswith horiztonalblades)
Starting with height 225On each side2 fixings
VM 11VM 12 (Standard)
only available in con-nection with a mountingframe or a plenum box
Ventilation Grille Model IB
01/03 - 9
Construction subject to change. No return possible!
07.09.2017Version:
Technical data
Pressure loss and noise levelSupply air face velocity
IB (supply air) IB with hit-and-miss damper (supply air)
Hit-and-miss damper position OPEN in %
Ventilation Grille Model IB
01/03 - 10
Construction subject to change. No return possible!
07.09.2017Version:
Return air face velocity
IB (return air) IB with hit-and-miss damper (return air)
Face area (m2) Correction factorSupply air
Return air
Hit-and-miss damper position OPEN in %
L325 425 525 625 825 1025 1225
H
75 0,016 0,021 0,026 0,031 0,042 0,052 0,062125 0,031 0,041 0,051 0,061 0,082 0,102 0,123175 0,046 0,061 0,076 0,092 0,122 0,152 0,183225 0,061 0,081 0,101 0,122 0,162 0,202 0,243325 0,091 0,121 0,152 0,182 0,242 0,303 0,363
Astirn (m2)
Astirn (m2) 0,012 0,025 0,05 0,1 0,16 0,2 0,4 KF (-) -9 -6 -3 0 +2 +3 +6
Astirn (m2) 0,01 0,02 0,04 0,08 0,16 0,32 0,4 KF (-) -9 -6 -3 0 +3 +6 +7
LWA = LWA1 + KF
Ventilation Grille Model IB
01/03 - 11
Construction subject to change. No return possible!
07.09.2017Version:
Maximum end velocity of jet
Supply air without coanda effect
Supply air with coanda effect
Ventilation Grille Model IB
01/03 - 12
Construction subject to change. No return possible!
07.09.2017Version:
Jet pathSupply air without coanda effect
Heating
Cooling
Ventilation Grille Model IB
01/03 - 13
Construction subject to change. No return possible!
07.09.2017Version:
Critical throwSupply air with coanda effect
Jet detachment
Ventilation Grille Model IB
01/03 - 14
Construction subject to change. No return possible!
07.09.2017Version:
Maximum penetrationMax. vertical penetration (in heating mode):
Ventilation Grille Model IB
01/03 - 15
Construction subject to change. No return possible!
07.09.2017Version:
Temperature and induction ratios
Supply air without coanda effect
Supply air with coanda effect
Ventilation Grille Model IB
01/03 - 16
Construction subject to change. No return possible!
07.09.2017Version:
Minimum distancesSupply air without coanda effect
For the diagrams to becorrect, the distance zbetween two grillesmust be > x (m) x 0.2.
Supply air with coan-da effect
For the diagrams to becorrect, the distance zbetween two grillesmust be > x (m) x 0.2.
Correction factor (for scattered air jet)with or without coanda effect
Blade position
Blade position 44° 84°End velocity of jet vmax (m/s) × 0.65 vmax (m/s) × 0.5TV = ΔTx / ΔT0 × 0.65 × 0.5Induction ratio i × 1.3 i × 2Jet drop - Jet rise y × 1.3 y × 2Grille distance z(m)> x × 0.20 x × 0.25
Blade position straight
Blade position 44° diverging
Blade position 84° diverging
Blade position 110° diverging
Blade position 140° diverging
Blade position opposite to one another
straightBlade position
The angle of propagation of the air jet and thus the length of throw can be affected by adjusting the vertical air deflection blades.
first and last slot covered
diverging
Ventilation Grille Model IB
01/03 - 17
Construction subject to change. No return possible!
07.09.2017Version:
LegendVZU (m³/h) [l/s] = Supply air volumeVAB (m³/h) [l/s] = Return air volumeVX (m³/h) [l/s] = total air jet volume at point xvmax (m/s) = Maximum end velocity of jetvK (m/s) = Duct velocityvstirn (m/s) = Intake velocity, blower stream velocity, out-
flow velocity, relative to AstirnAstirn (m²) = Face areax (m) = horizontal throwy (m) = vertical throwxkr (m) = Critical throwρ (kg/m³) = DensityΔpt (Pa) = Pressure lossLWA [dB(A)] = A-weighted sound power level
[LWA = LWA1 + KF]LWA1 [dB(A)] = A-weighted sound power level, relative to
Astirn, = 0.08 m² KF (-) = Correction factorΔTO (K) = Temperature difference between supply air
temperature and room temperature (ΔTO =tZU - tR)
ΔTOH (K) = Temperature difference between supply air and room temperature in heating mode (ΔTOH = tZUH - tRH )
ΔTX (K) = Temperature difference at point xtzu (°C) = Supply air temperaturetR (°C) = Room temperaturei (-) = Induction ratio (i = VX / VZU)TV (-) = Temperature ratio (TV = ΔTX / ΔTO )z (m) = Minimum clearance between two grilles
[z = x (m) × 0.2]RH (mm) = Room heightRB (mm) = Room widthH (mm) = HeightL (mm) = Length
Ventilation Grille Model IB
01/03 - 18
Construction subject to change. No return possible!
07.09.2017Version:
Order details
Ventilation grille
Front sidehorizontalpivoting
air deflectionblades
IB 1
galvanised sheet steel, front side painted toRAL 9010 (white)
Galvanised sheet steel
Screw mounting-SM
Plenum box(for type IB 1 / IB 2 / IB 10 / IB 11 only)
-ASK
without damper-
with throttle damper-DK
without rubber lip seal-
with rubber lip seal-GD
Mounting frame-E1
Accessories:
Order example:IB 1 -VM12-ASK-DK-GD
Unless stated otherwise, the thick-frame model will be delivered!
Front sidehorizontalpivoting
air deflectionblades with
vertical air de-flection blades
IB 2
Front side hori-zontal
pivotingair deflection
blades with hit-and-miss damper
IB 8
Horizontalfront side
pivoting airdeflection
blades withvertical air de-flection blades and hit-and-miss damper
IB 8c
Front side verti-cal
pivotingair deflection
blades
IB 10
Front sideverticalpivoting
air deflectionblades with
horizontal de-flectionblades
IB 11
Front side verti-cal
pivotingair deflection
blades with hit-and-miss damper
IB 15
Front side verti-cal
pivotingair deflection
blades with hor-izontal deflec-
tionblades and hit-
and-miss damperIB 16
-VM 12(standard)
-VM 11(only possible in conjunction
mounting frame orplenum box)
without insulation-
with insulation external (-Ia)
with insulation internal (-Ii)
Concealed mounting
Ventilation Grille Model IB
01/03 - 19
Construction subject to change. No return possible!
07.09.2017Version:
Specification textsSupply and return air grille type IB 1 comprising front frame,with front side horizontal pivoting air deflection blades, withscrew mounting (SM).Frame and blades made of stove enamelled sheet steel RAL9010 (white) or from galvanised sheet steel. Assembly partsmade of electrolytically galvanised sheet steel.Product: SCHAKO type IB 1
Supply and return air grille type IB 10 comprising front frame,with front side vertical, pivoting air deflection blades, with screwmounting (SM)Frame and blades made of stove enamelled sheet steel RAL9010 (white) or from galvanised sheet steel. Assembly partsmade of electrolytically galvanised sheet steel.Product: SCHAKO type IB 10
Accessories:
Supply and return air grille bands, type Ib (band), comprising 2-part or multi-part front frame, with front side vertical pivoting airdeflection blades with screw mounting (SM).Frame and blades made of stove enamelled sheet steel RAL9010 (white) or from galvanised sheet steel. Assembly partsmade of electrolytically galvanised sheet steel.Product: SCHAKO type IB 10 (band)
Accessories for IB 10 (band) / IB 11 (band) / IB 15 (band) / IB16 (band):
- additionally with vertical air deflection bladesProduct: SCHAKO type IB 2
- additionally with hit-and-miss damperProduct: SCHAKO type IB 8
- additionally with vertical air deflection blades and hit-and-miss damperProduct: SCHAKO type IB 8c
- with concealed mounting:- VM 11 (only available in connection with mounting frame
E1 or a plenum box)- VM 12 (standard)
- additionally with horizontal pivoting air deflection bladesProduct: SCHAKO type IB 11
- additionally with hit-and-miss damperProduct: SCHAKO type IB 15
- additionally with horizontal pivoting air deflection blades andhit-and-miss damperProduct: SCHAKO type IB 16
- with concealed mounting:- VM 11 (only available in connection with mounting frame
E1 or a plenum box)- VM 12 (standard)
- Plenum box (-ASK) made of galvanised sheet steel, with lat-eral connection spigot (for IB 1 / IB 2 / IB 10 / IB 11 only).- with throttle damper (-DK) in plenum box, adjustable, for
simple air volume regulation.- with rubber lip seal (-GD), made of special rubber, at the
connection spigot.- with thermal insulation
- internal (-Ii)- external (-la)
- Mounting frame (-E1), comprising electrolytically galvanisedsheet steel.
- additionally with horizontal pivoting air deflection bladesProduct: SCHAKO type IB 11 (band)
- additionally with 2- or multi-part hit-and-miss damper.Product: SCHAKO type IB 15 (band)
- additionally with horizontal pivoting air deflection blades and2- or multi-part hit-and-miss damperProduct: SCHAKO type IB 16 (band)
- Mounting frame (-E1), 2-part or multi-part, consisting ofelectrolytically galvanised sheet steel.