IADC Drill Bit Classifier_2004

7/26/2019 IADC Drill Bit Classifier_2004

http://slidepdf.com/reader/full/iadc-drill-bit-classifier2004 1/15 World Oil SEPTEMBER 2004 D-3

World Oil offers this comprehensive listing of major manufacturers’drilling bits to aid supervisors and engineers in field selection. While thislisting has been published annually for several years, changes from year toyear are significant. Prior to ordering, users should consult the manufac-turer to verify availability and specifications.

How to use tables. The following tables are divided into six formationcategories. Within these are listed most available drilling/coring bits bytype and manufacturer. To use the listings, identify the formation to bedrilled, decide which bit type is appropriate, i.e., roller cone, fixed cut-

ter, steel tooth, insert, diamond, etc., and then choose the manufacturer.Companies were asked to list bit data by: 1) IADC code, 2) readily avail-able sizes (special sizes are often available on request), 3) recommended

WOB in lb/in. diameter, and 4) codes for special features and usage, acombination of IADC and World Oil special codes (see Nomenclature).

IADC codes. The Bit Classifier utilizes the International Association ofDrilling Contractors’ (IADC’s) classification system for roller cone andfixed cutter bits. The standards for these classifications are two technicalpapers that appear in the IADC Drilling Manual, 11th Edition, Chapter

A, Sections 2 and 3. The two papers are “The IADC roller bit classifica-tion system,” adapted from IADC/SPE Paper 23937, presented Feb.18–21, 1992, and “Development of a new IADC fixed cutter drill bitclassification system,” Paper IADC/SPE 23940, presented Feb. 18–21,1992. All manufacturers were asked to submit data based on these clas-sification systems.

Formation categories. The tables show six formation categories corre-sponding to the IADC formation types, as described below. Companies were asked to list any discrete bit in only one formation type, leaving theuser to decide about application in harder, or softer, rock. Nevertheless,some duplication of similar bits in multiple formations remains. Theformations are:

• Soft, including soft sticky. Low compressive strength and high drill-ability, such as clay, marl, gumbo, unconsolidated sand.

• Soft-to-medium. Low compressive strength, inter-bedded with hardlayers, such as sand, shale, anhydrite.

• Medium. Hard with moderate compressive strength, such as shale,chalk, anhydrite, sand.

• Medium-to-hard. Dense with increasing compressive strength butnon- or semi-abrasive, e.g., shale, siltstone, sand, lime, anhydrite.

• Hard. Hard and dense with high compressive strength and someabrasive layers, such as sand, siltstone.

• Extremely hard. Very hard and abrasive, like quartzite and volcanics.

Nomenclature. World Oil shows special features as codes, which include 16designed by IADC and defined in the above classification papers, plus 11featured exclusively by World Oil for added descriptions. The codes are:

IADC

World Oil

Companies included. Company names, as shown in the bit type listings,

were shortened to conserve space. Full names and a central mailing addressare shown below. Companies with an asterisk by their names did not reply toa request for updated information, so their 2003 listings have been repeated.Readers should also note that DPI, Diamond Products International, isnow NQL Energy Services. Last November, Varel International acquireddistribution rights to the Brit Bit line from Weatherford and incorporatedthose products into its listings. Furthermore, Industrialexport of Romaniahas pulled out of the oil and gas drill bit business line. The United Diamonddivision of Canada’s Precision Drilling has spun off on its own, while a newentry based in Calgary, Precise Drilling Components, has joined this year’slistings. Christensen Products (Atlas Copco) is also no longer supplying bitsfor oil and gas drilling.

Baker Hughes .................. Baker Hughes INTEQ INTEQ P.O. Box 670968, Houston, Texas 77267-0968

Bit-Tech ............................ Bit-Tech SPH, Inc. P.O. Box 1298, Waskom, Texas 75692

Dowdco* ........................... Dowdco P.O. Box 7843, Midland, Texas 79708

GeoDiamond ..................... GeoDiamond P.O. Box 60068, Houston, Texas 77205-0068

Halliburton ....................... Halliburton Security DBS, Security DBS P.O. Box 60490 Houston, Texas 77205

Hughes Christensen ........ Hughes Christensen P.O. Box 2539, Houston, Texas 77252-2539

NQL ................................... NQL Energy Services 15500 International Plaza Dr., Houston, TX 77032

Precise ............................. Precise Drilling Components 11919 - 44th Street, S.E., Calgary, Alberta T2Z 4A1, Canada

PDC-Gearhart ................... PDC-Gearhart International Inc. 7601 Will Rogers Blvd., Fort Worth, Texas 76140

RBI-Gearhart .................... RBI-Gearhart 7601 Will Rogers Blvd., Fort Worth, Texas 76140

ReedHycalog .................... ReedHycalog, a Grant Prideco company (Grant Prideco) 1330 Post Oak Blvd., Suite 2700, Houston, Texas 77056

RockBit ............................. RockBit Industries of Canada 5677 Burleigh Crescent, S.E., Calgary, Alberta T2H 1Z7, Canada

Smith ................................ Smith International Inc. 16740 Hardy St., Houston, Texas 77205-0068

TIX .................................... TIX Corporation 5-6-21, KitaShinagawa, Shinagawa-ku, Tokyo 141-0001, Japan

Tri-Max ............................. Tri-Max Industries 6324 Cunningham Rd., Houston, Texas 77041-4712

United Diamond ............... United Diamond Suite, 4900, 150 - 6th Ave. S.W., Calgary, Alberta T2P 3Y7, Canada

Varel ................................. Varel International Inc. 1434 Patton Place, Suite 106, Carrollton, Texas 75007

A – Air drilling applicationB – Special bearing sealC – Center jetD – Deviation controlE – Extended jet (full length)G – Gauge/body protection (additional)H – Horizontal steering applicationJ – Jet deflection

L – Lug padsM – Motor applicationS – Standard steel tooth modelT – Two-cone bitW – Enhanced cutting structureX – Predominantly chisel tooth insert Y – Conical tooth insertZ – Other shape insert

F – Face discharge portsI – Thermally stable synthetic diamond

(TSP)K – Cross-flow hydraulicsN – Turbine drillingO – Milling applicationsP – Percussion drilling

Q – Lateral nozzlesR – Radial flow hydraulicsRST – Rotary steerableU – Cutter density: light (l), medium (m),

heavy (h),e.g., Ul, Um, Uh

V – Anti-whirl characteristics.

World Oil’s

2004 Drill Bit

Classifier

THE COVER: At the Smith Bits Geodiamond manufacturing facility

in Houston, a worker welds an upper section to a bit head. Photocourtesy of Smith Bits.


http://slidepdf.com/reader/full/iadc-drill-bit-classifier2004 2/15

M a n u f a c t u r e r , B i t

n a m e / m o d e l n u m b e r

I A D C c o d e

S i z e r a n g e ,

i n .

R e c o m m e n d e d W O B ,

l b / i n .

d i a m e t e r

R e c o m m e n d e d r o t a r y

s p e e d ,

r p m

S p e c i a l f e a t u r e s /

u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e

D-4 SEPTEMBER 2004 World Oil

Soft and Soft StickySteel tooth roller cone bits

Halliburton Security DBS

FEBXLC1 117 12¼ 1,000–5,000 80–300FEBXSC1 117 8½ 1,000–5,000 80–300

FXSC1 117 8½ 1,000–5,000 80–300

FXLC1 117 12¼ 1,000–5,000 80–300

EBXS1 117 6½ 1,000–5,000 80–300 W

EBXS3 137 115 ⁄ 8 2,000–5,500 60–300

EBXSC1 117 8½,97 ⁄ 8,12¼ 1,000–5,000 80–300 W

EBXT1 115 14¾,16,17½ 1,000–5,000 80–300 G

EBXT3 135 16,17½ 2,000–5,500 60–300 G

XN1 111 12¼,13½,14¾,16, 1,000–5,000 80–30017,17½,18½,20,22,23,24,26,28

XN3 131 22,26,28 2,000–5,500 60–300

XN4 211 57 ⁄ 8,6 2,000–6,000 40–250

XN5 311 17½ 3,000–6,500 40–140

XS1 116 97 ⁄ 8,12¼ 1,000–5,000 80–300

XS1 117 4¾,47 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8, 1,000–5,000 80–3006¼,6½,6¾,83 ⁄ 8

XSC1 116 97 ⁄ 8,105 ⁄ 8 1,000–5,000 80–300

XSC3 137 8½,17½ 1,000–5,000 80–300

XS3 137 83 ⁄ 8,8½,115 ⁄ 8,12¼ 2,000–5,500 60–300

XS4 216 12¼ 2,000–6,000 40–250

XS4 217 4¾,57 ⁄ 8,6,6½,8½ 2,000–6,000 40–250

XSC1 117 77 ⁄ 8,8½,8¾,9,9½, 1,000–5,000 80–300 W11,13½

XSC2 127 77 ⁄ 8,8¾ 1,000–5,000 80–300 W

XT1 115 14½,14¾,15½,16, 1,000–5,000 80–300 G17,17½,18,18½,22,23,24,25¾,26

XT2 126 163 ⁄ 8 1,000–5,000 80–300

XT3 135 15½,16,17½,22 2,000–5,500 60–300 G

XT4 215 15½,17½,18½ 2,000–6,000 40–250

Hughes Christensen

MX-X1 117 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼, 1,000–4,000 80–300 BGMW16,17½

MX-X3 137 8½,12¼ 1,000–4,000 80–300 BGMW

MX-1 117 57 ⁄ 8,6,61 ⁄ 8,6¼,6½, 1,000–4,000 80–350 BGMW6¾,75 ⁄ 8,77 ⁄ 8,8½,8¾,9½,97 ⁄ 8,105 ⁄ 8,115 ⁄ 8,12¼,13½,14¾,16,17½

MX-3 137 8½,9½,115

⁄ 8,12¼, 1,000–4,000 80–300 BGMW16,17½

STX-1 116 41 ⁄ 8,4½,4¾,47 ⁄ 8,55 ⁄ 8, 1,000–4,000 80–180 GW57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾

GT-1 116 77 ⁄ 8,8½,8¾,9½,97 ⁄ 8, 2,000–5,000 80–180 GW105 ⁄ 8,11,12¼

GT-G1H 117 77 ⁄ 8,8¾ 2,000–5,000 80–180 GW

GTX-1 114 12¼,13½,14¾,16, 2,000–5,000 80–180 GW17½

GTX-3 134 17½,30 2,000–5,000 80–180 GW

GTX-G1 115 12¼,14½,14¾,16, 1,500–4,000 80–200 GW17½,20,22,24,26,28

GTX-G3 135 83 ⁄ 8,8½,12¼,14¾, 1,500–4,000 80–200 GW17½

R1 111 11,12¼,13½,13¾, 2,000–5,000 60–250 S14¾,17½,20,22,23,24,26,28,30

R3 131 17½,22,26,28 2,000–5,000 60–250 S

RBI-Gearhart

SS1G 117 57 ⁄ 8,6,61 ⁄ 8,6¼,6½, 1,000–5,000 60–350 CEGHLM6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,

12¼SS1G 115 17½,20,22,24,26, 1,000–5,000 60–350 CEGHLM

32,36

SS1LRG 117 4¾,55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8, 1,000–5,000 60–350 CEGHM6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

SS1LRG 115 16,17½,20,22,24, 1,000–5,000 60–350 CEGHM26,32,36

SS2G 127 57 ⁄ 8,6,61 ⁄ 8,6¼,6½, 1,000–5,000 60–350 CEGHLM6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

SS2G 125 16,17½,20,22,24, 1,000–5,000 60–350 CEGHLM26,32,36

SS2LRG 127 57 ⁄ 8,6,61 ⁄ 8,6¼,6½, 1,000–5,000 60–350 CEGHM6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

SS2LRG 125 16,17½,20,22,24, 1,000–5,000 60–350 CEGHM26,32,36

SG3LRG 135 16,17½ 1,000–5,000 60–350 CEGHM

ReedHycalog (Grant Prideco)

Y11 111 12¼,13½,13¾,14¾, 1,000–3,000 60–250 SC

17½,24,26HP11 116 8½,8¾,97 ⁄ 8,11,12¼ 1,000–5,000 60–200 S

HP12 126 8½,8¾,12¼ 1,000–5,000 60–200 SW

SL12 126 57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾ 1,000–5,000 60–200 SN Y13 131 22,26 1,000–5,000 60–250 S

HP13 136 12 1,000–5,000 60–200 S

D13 137 12 1,000–5,000 60–200 S,W,M,G,H

HP13G 137 8½,8¾,97 ⁄ 8,12¼ 1,000–5,000 60–200 SG

TD13 137 8½ 1,000–5,000 60–200 SG

ETS11G 115M 115 ⁄ 8 500–3,500 120–800 SN

T11 115M 12¼,14¾,16,17½, 1,000–3,000 60–350 CGMN22,24,26

EMS11G 115W 13½,14½,18½, 1,000–5,000 60–200 SW22,26

EHT11 116W 97 ⁄ 8,105 ⁄ 8,11,12¼ 1,000–5,000 60–200 SW

D11 117W 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 1,000–5,000 60–200 S,W,M,G,H

EHT11G 117W 9½,97 ⁄ 8,12¼ 1,000–5,000 60–200 SW

SL11 117W 1,000–5,000 60–200 SW

TC10 117W 77 ⁄ 8,8¾ 1,000–5,000 60–200 WG

TC11 117W 77 ⁄ 8,8½ 1,000–5,000 60–200 WG

TD11 117W 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 1,000–5,000 60–200 SW

ETS13G 135M 115 ⁄ 8 500–3,500 120–800 SN

T13 135M 16,12¼,17½ 1,000–3,500 60–350 SCGMN

EHT13G 137W 115 ⁄ 8 1,000–5,000 60–200 SW

EMS21G 215W 17½ 1,000–5,000 60–200 SW

Smith

DGJ 131 17½,20,22,23,26 1,000–4,000 70–180 S

DSJ 111 12¼,13½,13¾,14¾, 1,000–4,000 70–180 S

17½,23,23½,24,26,28

FDG 136 57 ⁄ 8,6 2,000–5,000 50–160 S

FDGH 137 77 ⁄ 8,8½,115 ⁄ 8,12¼ 2,000–5,000 50–160 S

FDS 116 9½,11 1,000–5,000 50–160 S

FDS+ 116 6¼,77 ⁄ 8,8½,8¾,9, 1,000–5,000 50–160 S97 ⁄ 8,10¼,115 ⁄ 8,12¼

FDS+OD 117 8¾ 1,000–5,000 50–160 SW

FDS+V 116 77 ⁄ 8,8¾ 1,000–5,000 50–160 S

FDSS+ 116 77 ⁄ 8,8½,8¾,97 ⁄ 8,105 ⁄ 8, 1,000–5,000 50–160 S12¼

FDT 126 7¼,7½,8½,8¾,105 ⁄ 8, 1,500–6,000 50–160 S12¼

GFS+ 117 8½,95 ⁄ 8,97 ⁄ 8,12¼ 1,000–5,000 50–300 BGHM

GFS+OD 117 8½,12¼ 1,000–5,000 50–300 BGHMW

GFS+V 117 8½,97 ⁄ 8 1,000–5,000 50–300 BGHM

GFSH+ 117 12¼ 1,000–5,000 50–300 BGHM

GFSH+OD 117 12¼ 1,000–5,000 50–300 BGHMW

GFSH+V 117 12¼ 1,000–5,000 50–300 BGHM

GFSS+ 117 97 ⁄ 8,105 ⁄ 8,12¼ 1,000–5,000 50–300 BGHM

GFSS+OD 117 105 ⁄ 8 1,000–5,000 50–300 BGHMW

GG+ 135 34,36 1,000–4,000 50–300 BGHM

GGH+ 135 12¼,16,17½,36 1,000–5,000 50–300 BGHM

GGH+OD 135 12¼,16,17½ 1,000–5,000 50–300 BGHMW

GSS+ 115 17½,36 1,000–4,000 50–300 BGHM

GSSH+ 115 16,16¼,17½,18 1,000–4,000 50–350 BGHM

GSSH+OD 115 16,17½ 1,000–4,000 50–350 BGHMW

GSSH+V 115 17½ 1,000–4,000 50–350 BGHM

MFDGH 137 83 ⁄ 8,8½ 1,000–5,000 50–250 HM

MFDGHOD 137 8½ 1,000–5,000 50–250 HMW

MFDSH 117 4¾,77 ⁄ 8,8½,8¾ 1,000–5,000 50–250 HM

MFDSHOD 117 8½,8¾ 1,000–5,000 50–250 HMW

MSDGH 135 12,121 ⁄ 8,12¼,16,17, 1,000–5,000 50–280 HM20,22,23,26,28,29,30

MSDSH 115 13½,18½ 1,000–4,000 50–280 HM

MSDSSH 115 14½,14¾,22,24,26 1,000–4,000 50–280 HM

MSDSSH+ 115 26 1,000–4,000 50–280 HM

MSDSSHOD 115 26 1,000–4,000 50–280 HMW

SDGH 135 12¼,15½,17½,20 1,000–5,000 50–160 S

SDS 114 12¼ 1,000–4,000 80–200 S

XR+ 117 47 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼, 1,000–5,000 50–300 HM6½,6¾

XR+OD 117 61 ⁄ 8 1,000–5,000 50–300 HMW

TIX

SS 111 6,6¼,77 ⁄ 8 1,000–4,000 60–150

SS 111 83 ⁄ 8,8½,85 ⁄ 8,8¾,9½, 1,000–4,500 80–20095 ⁄ 8,97 ⁄ 8,11,115 ⁄ 8,12,12¼

SS 111 13¾,14¾,15,15½, 1,000–3,500 80–20017½,20,22,23,24,26

SS-X 116 57 ⁄ 8,6¼,75 ⁄ 8,77 ⁄ 8 1,500–4,000 60–120 B

SS-X 116 8½,8¾,97 ⁄ 8,105 ⁄ 8, 1,500–4,500 60–120 B115 ⁄ 8,12¼

SS-X 116 15½,17½ 1,500–3,500 60–120 B

SS-Z 114 83 ⁄ 8,8½,8¾,9½,97 ⁄ 8, 1,500–4,500 80–150115 ⁄ 8,12¼

SS-Z 114 13¾,14¾,15,17½, 1,500–3,500 80–15026

SS-XZ 114 12¼ 1,500–4,500 80–250 M

SS-XZC 114 16,17½ 1,500–3,500 80–150 C

SS-MZC 114 16,17½ 1,500–3,500 80–250 CM

S 121 57 ⁄ 8,6,6¼,75 ⁄ 8,77 ⁄ 8 1,000–4,000 60–150

S 121 83 ⁄ 8,8½,85 ⁄ 8,8¾,95 ⁄ 8, 1,000–4,500 80–18097 ⁄ 8,105 ⁄ 8,11,115 ⁄ 8,12,12¼

S 121 13¾,14¾,15,15½, 1,000–3,500 80–18017½,20,22,23,24,26

S-X 126 57 ⁄ 8,6,6¼,75 ⁄ 8,77 ⁄ 8 1,500–4,000 60–120 BS-X 126 83 ⁄ 8,8½,8¾,95 ⁄ 8,97 ⁄ 8, 2,000–4,500 60–120 B

105 ⁄ 8,115 ⁄ 8,12¼

S-X 126 15½,17½,16 1,500–4,000 60–120 B

S-TX 127 8½,12¼ 2,000–4,500 60–120 BG

S-TX 127 16,17½ 1,500–4,000 60–120 BG

S-Z 124 8½,8¾,95 ⁄ 8,97 ⁄ 8,105 ⁄ 8 1,500–4,500 80–150

S-Z 124 115 ⁄ 8,12¼ 1,500–4,500 80–150

S-Z 124 15,17½,26 1,500–3,500 80–150

S-XZ 124 12¼ 1,500–4,500 80–250 M

S-XZC 124 16,17½ 1,500–3,500 80–150 C

S-MZC 124 16,17½ 1,500–3,500 80–250 CM

Tri–Max

TM111 111 8½–17½ 1,000–3,000 100–200 G

TM114 114 8½–17½ 2,000–3,000 100–200 GB

TM115 115 6–17½ 2,000–3,000 80–150 GB

TM116 116 6–17½ 2,000–4,000 80–150 GB

TM117 117 6–17½ 2,000–4,000 80–150 GB

Varel

L3A 111S 34,36 1,500–4,500 80–250 S

L111 111S 8½,13½,14¾,15, 1,500–4,500 80–250 S17½,20,22,23,24,26,27½

L113 113S 26,28 1,500–4,500 80–250 S

ETR1G 115S 14¾,16,17½,22,23 1,500–4,500 80–250 GS

CR1G 115S 17½ 1,500–5,000 60–250 CGMW

L115 115S 26,28 1,500–5,000 80–200 S

CHS1GMS 117S 12¼ 1,500–5,000 80–180 GMW

CH1 116S 77 ⁄ 8 1,500–5,000 80–180 S

CH1GMS 117S 8½,8¾,97 ⁄ 8,11,12¼, 1,500–5,000 80–180 GMW13½,13¾

L117 117S 6,61 ⁄ 8,6¼,8½ 1,500–5,000 80–180 S

L3S 121S 4½ 2,000–5,000 80–250 S

L121 121S 12¼,13¾,17½,26 2,000–5,000 80–250 S

L126 126S 61 ⁄ 8,6¼,6½ 2,000–6,000 70–160 S

CH2GMS 127S 77 ⁄ 8,83 ⁄ 8,8¾,12 2,000–5,500 60–250 GMW

L127 127S 61 ⁄ 8,6¾,77 ⁄ 8,8¾ 2,000–6,000 70–160 G

L131 131S 17½,22,26 2,500–6,000 80–250 S

CH3GMS 137S 115 ⁄ 8,12¼ 2,000–6,000 80–180 GMW

CR3G 135S 16,17½ 2,000–6,000 80–180 CGMW

ETR3G 135S 8½,115

⁄ 8

,16,17½, 2,000–6,000 80–180 GW23,26

Insert roller cone bits


FEBXL(D)12 437 12¼ 2,000–5,000 60–300 BWC

FEBXL(D)16 447 12¼ 2,000–5,000 60–300 BWC

EBXS(D)10- 437 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–5,000 60–300 BWEBXS(D)13 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

EBXS(D)14- 447 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–5,000 60–300 BWEBXS(D)17 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

FEBXS(D)16 447 8½ 2,000–5,000 60–300 BW

EBXS00- 417 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 1,000–4,000 80–250 BEBXS05 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

EBXS06- 427 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 1,000–4,000 80–250 BEBXS09 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

EBXT(D)10- 435 13½,14¾,16,17½, 2,000–5,000 60–300 BWEB XT(D)13 20,22,24,26,28

EBXT(D)14- 445 13½,14¾,16,17½, 2,000–5,000 60–300 BWEBXT(D)17 20,22,24,26,28

EBXT00- 415 17½,24,26 1,000–5,000 70–300 WEBXT05

EBXT06- 425 13½,14¾,16,17½, 1,000–4,000 80–250 BEBXT09 20,22,24,26,28

XS(D)10- 437 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–5,000 60–300 BWXS(D)13 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

FXS(D)12 437 8½ 2,000–5,000 60–300 BW

XS(D)14- 447 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–5,000 60–300 BWXS(D)17 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

XS00-XS05 417 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 1,000–4,000 80–250 B6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,105 ⁄ 8,12¼

XS06-XS09 427 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 1,000–4,000 80–250 B6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,105 ⁄ 8,12¼

XT(D)10- 435 13½,14¾,16,17½, 2,000–5,000 60–300 BWXT(D)13 20,22,24,26,28

XT(D)14- 445 13½,14¾,16,17½, 2,000–5,000 60–300 BWXT(D)17 20,22,24,26,28





I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e


XT00-XT05 415 13½,14¾,16,17, 1,000–5,000 70–300 B17½,20,22,24,26,28

XT06-XT09 425 13½,14¾,16,17½, 1,000–4,000 80–250 B20,22,24,26,28

XT08 425 17½ 1,000–4,000 80–250 B

XT12 435 17½ 1,000–4,000 80–250 B

Hughes Christensen

GTX-00 417 26 1,000–6,000 50–220 GMW

STX-09 437 55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼ 1,000–6,000 50–220 BGMW

STX-09H 437 8½,17¼ 1,000–6,000 50–220 BGMW

MX-00 417 8½,17¼,17½ 1,000–6,000 50–220 BGMW

MX-03 417 8½,8¾,9½,97 ⁄ 8, 1,000–6,000 50–220 BGMW12¼,17½

MX-09 437 6,61 ⁄ 8,6½,77 ⁄ 8,8½, 1,000–6,000 50–220 BGMW8¾,9½,97 ⁄ 8,105 ⁄ 8,115 ⁄ 8,12¼,16,17½

MX-09C 427 8½,14¾ 1,000–6,000 50–220 BGMW

MX-09CG 447 12¼ 1,000–6,000 50–250 BGMW

MX-09G 437 8½,17½ 1,000–6,000 50–220 BGMW

MX-09H 437 61 ⁄ 8,8¾,12¼,12½, 1,000–6,000 50–220 BGMW17½

MX-11H 447 12¼,14¾,17½ 1,000–6,000 50–220 BGMW

MX-11/11H 447 77 ⁄ 8,12¼ 1,000–6,000 50–220 BGMW

MX-18 447 57 ⁄ 8,6,6¼,6½,77 ⁄ 8, 1,000–6,000 50–220 BGMW83 ⁄ 8,8½,97 ⁄ 8,12¼,

14¾MX-18C 447 9½ 1,000–6,000 50–220 BGMW

MX-18CH 447 8½,8¾ 1,000–6,000 50–220 BGMW

MX-18G 447 8½ 1,000–6,000 50–300 BGMW

MX-18H 447 6,61 ⁄ 8,8¾,97 ⁄ 8,12¼ 1,000–6,000 50–300 BGMW

HX-03 427 77 ⁄ 8,8¾ 1,000–6,000 50–220 EGW

HX-03C 427 8¾ 1,000–6,000 50–220 EGW

HX-03J 427 8¾ 1,000–6,000 50–220 EGW

HX-05C 427 77 ⁄ 8,8¾ 1,000–6,000 50–220 EGW

HX-09 437 77 ⁄ 8,8½ 1,000–6,000 50–220 EGW

HX-09C 437 77 ⁄ 8,8¾ 1,000–6,000 50–220 EGW

HX-09CJ 437 8¾ 1,000–6,000 50–220 EGW

H-18H 447 8¾,12¼ 1,000–6,000 50–220 EGW

HX-18/18H 447 77 ⁄ 8 1,000–6,000 50–220 EGW

STX-09 437 57 ⁄ 8,6,61 ⁄ 8,6¼ 2,000–6,000 80–200 GHW

STX-09H 437 6,61 ⁄ 8 2,000–5,000 80–250 GHW

STX-09C 437 6¼ 2,000–5,000 80–250 GHW

STX-18 447 37 ⁄ 8,61 ⁄ 8,6¼ 2,000–5,000 80–250 GHW

STR-09C 427 6 2,000–5,000 80–250 GHW

STX-18H 447 61 ⁄ 8 2,000–5,000 80–250 GHW

GT-00 417 8¾ 2,000–5,000 70–140 W

GT-00H 417 85½ 2,000–5,000 70–140 W

GT-03 417 8½,8¾,97 ⁄ 8,195 ⁄ 8, 2,000–5,000 70–140 W12¼,20,16

GT-09 437 77 ⁄ 8,8½,8¾,97 ⁄ 8, 2,000–5,000 70–140 W12¼,20

GT-09C 427 77 ⁄ 8,8¾,12¼ 2,000–5,000 60–140 WY

GTX-00 415 24,26 1,000–3,500 80–200 W

GTX-00H 415 17½ 1,000–3,500 80–200 W

GTX-03 415 16,17½,20,22,23, 1,000–3,500 80–200 W24,26,28,30

GTX-03C 415 30 1,000–3,500 80–200 W

GTX-03H 415 16,17½,22,23 1,000–3,500 80–200 W

GTX-09 435 16,17½,20,22,23 1,000–3,500 80–200 W

GTX-09H 435 16 1,000–3,500 80–200 W

GX-11 435 8¾ 1,000–3,500 80–200 W

GTX-11 435 22 1,000–3,500 80–200 W

GTX-11H 435 16,17½,20,22,28 1,000–3,500 80–200 W

GT-18 447 77 ⁄ 8,8½,8¾,97 ⁄ 8, 2,000–6,000 50–120 W105 ⁄ 8,115 ⁄ 8

GT-18C 447 77 ⁄ 8 2,000–6,000 50–120 WY

RBI-GearhartC02LRGSP 415X 16,17½ 1,500–4,000 60–350 ACEGHLMT

C05LRGSP 415X 14¾,16,17½ 1,500–4,000 60–350 ACEGHLMT

C05VLRGSP 415X 14¾,16,17½ 1,500–4,000 60–350 ACEGHLMT

C05 417X 3¾,57 ⁄ 8,6,61 ⁄ 8,77 ⁄ 8, 1,500–4,000 60–350 ACEGHLMT8½,8¾,12¼

C05LRGSP 417X 3¾,4¾,57 ⁄ 8,6,61 ⁄ 8, 1,500–4,000 60–350 ACEGHMT6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C05VLRGSP 417X 3¾,4¾,57 ⁄ 8,6,61 ⁄ 8, 1,500–4,000 60–350 ACEGHMT6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

B05LRGSP 417X 41 ⁄ 8,61 ⁄ 8 1,500–4,000 60–350 AGHLM

C1 427X 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 1,500–4,000 60–350 ACEGHLMT6½,6¾,77 ⁄ 8,8½,8¾,12¼

C1 425X 16,17½,22,23 1,500–4,000 60–350 ACEGHLMT

C1LRGSP 427X 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 1,500–4,000 60–350 ACEGHMT6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C1LRGSP 425X 16,17½,22,23 1,500–4,000 60–350 ACEGHMT

C1VLRGSP 427X 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 1,500–4,000 60–350 ACEGHMT6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C1VLRGSP 425X 16,17½,22,23 1,500–4,000 60–350 ACEGHMT

C15 437X 3¾,4¾,57 ⁄ 8,6,61 ⁄ 8, 2,000–5,000 60–350 ACEGHLMT6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C15 435X 14¾,16,17½,22,23 2,000–5,000 60–350 ACEGHLMT

C15LRG 437X 3¾,4¾,57 ⁄ 8,6,61 ⁄ 8, 2,000–5,000 60–350 ACEGHMT6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C15LRGSP 435X 14¾,16,17½,22,23 2,000–5,000 60–350 ACEGHMT

C15LRGSP 437X 3¾,4¾,57 ⁄ 8,6,61 ⁄ 8, 2,000–5,000 60–350 ACEGHMT6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C15VLRGSP 435X 14¾,16,17½,22,23 2,000–5,000 60–350 ACEGHMT

B15LRGSP 437X 37 ⁄ 8,41 ⁄ 8,4½,4¾,5½, 2,000–5,000 60–350 AGHLM57 ⁄ 8,6,61 ⁄ 8,6¼,6½

C17 447Y 4¾,5½,57 ⁄ 8,6,61 ⁄ 8, 2,000–5,000 60–350 ACEGHLMT6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C17H 447Y 77 ⁄ 8,8½,8¾ 2,000–5,000 60–350 CGHM

C17LRGSP 447Y 5½,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–5,000 60–350 ACEGHMT77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C18 447X 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 2,000–5,000 60–350 ACEGHLMT

C18 445X 14¾,16,17½ 2,000–5,000 60–350 ACEGHLMT

C18LRGSP 447X 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 2,000–5,000 60–350 ACEGHMT

C18 445X 14¾,16,17½ 2,000–5,000 60–350 ACEGHLMT

C18LRGSP 445X 14¾,16,17½ 2,000–5,000 60–350 ACEGHMT


EHP41H 417 105 ⁄ 8,12¼ 2,000–5,000 60–200 G

HP41H 417 77 ⁄ 8 2,000–5,000 60–200 X

TD41 417 2,000–5,000 60–200 YW

TD41A 417 8½,97 ⁄ 8 2,000–5,000 60–200 XW

TD41H 417 77 ⁄ 8,8¾ 2,000–5,000 60–200 XW

EHP42H 427 12¼ 1,500–5,500 60–200 X

EHP43H 437 105 ⁄ 8,12¼ 2,000–5,000 60–200 G

HP43A 437 77 ⁄ 8,12¼ 2,000–5,000 60–180 X

SL43H 437 6,61 ⁄ 8,6¼ 2,000–5,000 60–200 G

TD43 437 77 ⁄ 8,8½,8¾ 2,000–5,000 60–200 YW

TD43A 437 77 ⁄ 8,8½,8¾,97 ⁄ 8 2,000–5,000 60–200 XW

TD43H 437 12¼ 2,000–5,000 60–200 XW

EHP44H 447 12¼ 1,500–5,500 60–200 X

HP44H 447 77 ⁄ 8,12¼ 1,500–5,500 60–200 X

HP44X 447 77 ⁄ 8 1,500–5,500 60–200 X

TD44 447 77 ⁄ 8,8¾ 1,500–5,500 60–200 XW

TD44H 447 8½,8¾,97 ⁄ 8,12¼ 1,500–5,500 60–200 XW

TD44X 447 77 ⁄ 8 1,500–5,500 60–200 XW

EMS41H 415M 16,17½ 1,000–3,500 60–450 CGMNY

T41 415M 16,17½,22,24,26 2,000–5,000 60–450 CGMNYW

EMS42H 425M 16 1,000–3,500 60–450 CGMNY

T42 425M 16,22 2,000–5,000 60–450 CGMNYW

TD42H 427W 12¼ 2,000–5,000 60–200 XW

EMS43A 435M 17½ 1,000–3,500 60–350 CGMNY

EMS43H 435M 12¼,16,22,26 1,000–3,500 60–200 CGMNY

T43 435M 12¼,14¾,16,17½, 1,000–3,500 60–200 CGMNYW22,26

D43 437W 8½ 2,000–5,000 60–180 Z,W,M,G,H

EMS44A 445M 17 1,000–3,500 60–350 CGMNX

EMS44H 445M 12¼,16,17½ 1,000–3,500 60–350 CGMNX

T44 445M 12¼,14¾,16,17½ 1,000–3,500 60–350 CGMNXW

D44 447W 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 1,500–5,500 60–200 Z,W,M,G,H

Smith

F02T 417X 105 ⁄ 8 1,000–4,000 50–160 X

F05T 427X 8¾ 1,000–5,000 50–160 X

F07 427Y 77 ⁄ 8,8¾ 1,000–6,000 50–160 Y

F07YG 427Y 8¾ 1,000–6,000 50–160 Y

F1 437X 8½,12¼ 2,000–5,000 50–160 X

F10T 437X 8¾,12¼ 2,000–5,000 50–160 X

F12 437X 8¾ 2,000–5,000 50–160 XF12T 437X 77 ⁄ 8 2,000–5,000 50–160 X

F12V 437X 8¾ 2,000–5,000 50–160 X

F12Y 437Y 77 ⁄ 8,8¾ 2,000–5,000 50–160 Y

F12YGV 437Y 77 ⁄ 8,8¾ 2,000–5,000 50–160 Y

F12YV 437Y 77 ⁄ 8,8¾ 2,000–5,000 50–160 Y

F14T 437X 8¾ 2,000–5,000 50–160 X

F15 447X 77 ⁄ 8,8½,8¾,97 ⁄ 8 2,000–5,000 50–160 X

F15T 447X 12¼ 2,000–5,000 50–160 X

F15V 447X 97 ⁄ 8 2,000–5,000 50–160 X

F05V 77 ⁄ 8 1,000–5,000 50–160 X

F07YV 77 ⁄ 8 1,000–6,000 50–160 Y

F08V 77 ⁄ 8 2,000–5,000 50–160 X

F14YV 8¾ 2,000–5,000 50–160 Y

F16V 77 ⁄ 8,8¾ 2,000–5,000 50–160 X

F18V 77 ⁄ 8 2,000–5,000 50–160 X

G02T 415X 16,17½ 1,000–4,000 50–300 BGHMX

G02TD 415X 16,17½ 1,000–4,000 50–300 BGHMX

G02TDOD 415X 16,17½ 1,000–4,000 50–300 BGHMWX

G04 415X 24 1,000–4,000 50–300 BGHMX

G04B 415X 24,26 1,000–4,000 50–300 BGHMXG04BDV 415X 12¼ 1,000–4,000 50–300 BGHMWX

G04BV 415X 12¼ 1,000–4,000 50–300 BGHMX

G05 425X 16,17½ 1,000–4,000 50–300 BGHMX

G05TD 425X 12¼ 1,000–4,000 50–300 BGHMX

G08 425X 22,23 1,000–4,000 50–300 BGHMX

G10SD 435X 12¼,17½ 1,000–4,000 50–300 BGHMWX

G10T 435X 16,17½ 1,000–4,000 50–300 BGHMX

G10TD 435X 16,17½ 1,000–4,000 50–300 BGHMX

G12 435X 22 1,000–4,000 50–300 BGHMX

G15BDOD 445X 17½ 1,000–5,000 50–300 BGHMWX

G15BDV 445X 12¼ 1,000–5,000 50–300 BGHMWX

G15DTD 445X 14¾ 1,000–5,000 50–300 BGHMWX

G15SD 445X 12¼,17½ 1,000–5,000 50–300 BGHMWX

G15SDV 445X 12¼ 1,000–5,000 50–300 BGHMWX

G15TD 445X 14¾,17½ 1,000–5,000 50–300 BGHMX

G18 445X 16 1,000–5,000 50–300 BGHMX

G18ODV 445X 16 1,000–5,000 50–300 BGHMWX

G18V 445X 16 1,000–5,000 50–300 BGHMX

GF04TD 417X 12¼ 1,000–5,000 50–280 BGHMX

GF05BD 427X 12¼ 1,000–5,000 50–280 BGHMWX

GF05BDV 427X 12¼ 1,000–5,000 50–280 BGHMWX

GF05BODV 427X 12¼ 1,000–5,000 50–280 BGHMWX

GF10 437X 12¼ 2,000–5,000 50–280 BGHMX

GF10BDV 437X 12¼ 1,000–5,000 50–280 BGHMWX

GF10BODV 437X 12¼ 1,000–5,000 50–280 BGHMWX

GF10BV 437X 12¼ 1,000–5,000 50–280 BGHMX

GF10SD 437X 12¼ 1,000–5,000 50–280 BGHMWX

GF10T 437X 12¼ 2,000–5,000 50–280 BGHMXGF10TD 437X 12¼ 1,000–5,000 50–280 BGHMX

GF12TDOD 437X 12¼ 1,000–5,000 50–280 BGHMWX

GF15 447X 8½,95 ⁄ 8,115 ⁄ 8,12¼ 2,000–5,000 50–280 BGHMX

GF15BDV 447X 12¼ 2,000–5,000 50–280 BGHMWX

GF15BODV 447X 12¼ 2,000–5,000 50–280 BGHMWX

GF15BV 447X 12¼ 2,000–5,000 50–280 BGHMWX

GF15HDG 447X 8½ 2,000–5,000 50–280 BGHMWX

GF15HDGV 447X 8½ 2,000–5,000 50–280 BGHMWX

GF15OD 447X 8½ 2,000–5,000 50–280 BGHMWX

GF15SD 447X 8½,12¼ 2,000–5,000 50–280 BGHMWX

GF15SDGV 447X 12¼ 2,000–5,000 50–280 BGHMWX

GF15SDV 447X 8½,12¼ 2,000–5,000 50–280 BGHMWX

GF15T 447X 12¼ 2,000–5,000 50–280 BGHMX

GF15TD 447X 12¼ 2,000–5,000 50–280 BGHMX

GF08BV 8¾ 1,000–5,000 50–280 BGHMX

GF08ODGV 8½ 1,000–5,000 50–280 BGHMWX

GF08YV 8½ 1,000–5,000 50–280 BGHMY

GF11YODV 8½,12¼ 2,000–5,000 50–280 BGHMWY

GF11YV 8½,12¼ 2,000–5,000 50–280 BGHMY

GF18OD 12¼ 2,000–5,000 50–280 BGHMWXGF18SD 12¼ 2,000–5,000 50–280 BGHMWX

GF18SDV 12¼ 2,000–5,000 50–280 BGHMWX

GFS04 417X 12¼ 1,000–5,000 50–280 BGHMX

GFS04BD 417X 12¼ 1,000–5,000 50–280 BGHMWX

GFS04OD 417X 12¼ 1,000–5,000 50–280 BGHMWX

GFS04TD 417X 12¼ 1,000–5,000 50–280 BGHMX

GFS05V 427X 12¼ 1,000–5,000 50–280 BGHMX

GFS10 437X 12¼ 2,000–5,000 50–280 BGHMX

GFS10BV 437X 12¼ 1,000–5,000 50–280 BGHMX

GFS10V 437X 12¼ 2,000–5,000 50–280 BGHMX

GFS15 447X 12¼ 2,000–5,000 50–280 BGHMX

GFS15BV 447X 12¼ 2,000–5,000 50–280 BGHMX

GFS15OD 447X 12¼ 2,000–5,000 50–280 BGHMWX

GFS15V 447X 12¼ 2,000–5,000 50–280 BGHMX

GS01 415X 17½ 1,000–4,000 50–300 BGHMX

GS01B 415X 16 1,000–4,000 50–300 BGHMX

GS01BD 415X 16 1,000–4,000 50–300 BGHMWX

GS01TD 415X 17½ 1,000–4,000 50–300 BGHMX

GS04B 415X 24 1,000–4,000 50–300 BGHMX

GS04BV 415X 12¼ 1,000–4,000 50–300 BGHMXGS05 425X 16,17½ 1,000–4,000 50–300 BGHMX

GS05BV 425X 12¼,16 1,000–4,000 50–300 BGHMX

GS05TDOD 425X 17½ 1,000–4,000 50–300 BGHMWX

GS05V 425X 16,17½ 1,000–4,000 50–300 BGHMX

GS08 425X 22 1,000–4,000 50–300 BGHMX

GS10 435X 16,22 1,000–4,000 50–300 BGHMX

GS10BDODV 435X 17½ 1,000–4,000 50–300 BGHMWX

GS10BV 435X 12¼,17½ 1,000–4,000 50–300 BGHMX

GS10TDOD 435X 16 1,000–4,000 50–300 BGHMWX

GS12 435X 22 1,000–4,000 50–300 BGHMX

GS15BV 445X 12¼ 1,000–5,000 50–300 BGHMX

GS18 445X 16,26,28 1,000–5,000 50–300 BGHMX

GS18BDODV 445X 16 1,000–5,000 50–300 BGHMWX

GS18BDV 445X 16 1,000–5,000 50–300 BGHMWX

GS18BV 445X 16 1,000–5,000 50–300 BGHMX

GS18V 445X 16,17½ 1,000–5,000 50–300 BGHMX

GS01BDV 17½ 1,000–4,000 50–300 BGHMWX

GS01BV 17½ 1,000–4,000 50–300 BGHMX

GS15BV 16 1,000–5,000 50–300 BGHMX

M02S 415X 26 1,000–4,000 50–280 HMX

M02SOD 415X 26 1,000–4,000 50–280 HMWX

M02T 415X 12¼ 1,000–4,000 50–280 HMX





I A D C c o d e

S i z e r a n g e , i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e

World Oil SEPTEMBER 2004 D-7

M02TDG 415X 12¼ 1,000–4,000 50–280 GHMX

MG02T 415X 17½ 1,000–4,000 50–300 BGHMX

M10T 435X 12¼ 1,000–4,000 50–280 HMX

M12T 435X 14¾ 1,000–4,000 50–280 HMX

M15S 445X 18½,23 1,000–5,000 50–280 HMX

MF04 417X 8½ 1,000–5,000 50–250 HMX

MF04OD 417X 8½ 1,000–5,000 50–250 HMWX

MF05T 427X 7½,8½,97 ⁄ 8 1,000–5,000 50–250 HMX

MF05TD 427X 8½ 1,000–5,000 50–250 GHMX

MF10T 437X 8½,97 ⁄ 8 2,000–5,000 50–250 HMX

MF10TD 437X 8½,97 ⁄ 8,12¼ 1,000–5,000 50–250 GHMX

MF10TOD 437X 8½ 2,000–5,000 50–250 HMWX

MF12TDOD 437X 12¼ 1,000–5,000 50–250 GHMWX

MF15 447X 4¾,47 ⁄ 8,5½,115 ⁄ 8 2,000–5,000 50–250 HMX

MF15DOD 447X 8½ 2,000–5,000 50–250 HMWX

MF15OD 447X 6,12¼ 2,000–5,000 50–250 HMWX

MF15ODPD 447X 6,83 ⁄ 8 2,000–5,000 50–250 HMWX

MF15SD 447X 83 ⁄ 8,8½ 2,000–5,000 50–250 GHMWX

MF15T 447X 8½,97 ⁄ 8,105 ⁄ 8 2,000–5,000 50–250 HMX

MF15TD 447X 83 ⁄ 8,8½,105 ⁄ 8 2,000–5,000 50–250 GHMX

MF15TDOD 447X 83 ⁄ 8,8½ 2,000–5,000 50–250 GHMWX

MF15TOD 447X 8½ 2,000–5,000 50–250 HMWX

MF19V 447X 77 ⁄ 8 2,000–5,000 50–250 HMX

MFS04 417X 8½ 1,000–5,000 50–250 HMX

MFS04OD 417X 8½ 1,000–5,000 50–250 HMWX

MG10TDOD 437X 12¼ 1,000–5,000 50–280 BGHMWXMS18 445X 28 1,000–5,000 50–280 HMX

XR10 437X 61 ⁄ 8 1,000–5,000 50–300 HMX

XR10D 437X 61 ⁄ 8 1,000–5,000 50–300 HMWX

XR10T 437X 6,61 ⁄ 8,6¼,6½,6¾ 1,000–5,000 50–300 HMX

XR15 447X 61 ⁄ 8 1,000–5,000 50–300 HMX

XR15T 447X 57 ⁄ 8,6,61 ⁄ 8,6¼,6½ 1,000–5,000 50–300 HMX

XR15TD 447X 57 ⁄ 8,6,61 ⁄ 8 1,000–5,000 50–300 HMWX

XR15TDG 447X 57 ⁄ 8,6,61 ⁄ 8 1,000–5,000 50–300 HMWX

XR15TDODG 447X 61 ⁄ 8 1,000–5,000 50–300 HMWX

XR15TOD 447X 57 ⁄ 8,6,61 ⁄ 8 1,000–5,000 50–300 HMWX

XR15TODG 447X 61 ⁄ 8 1,000–5,000 50–300 HMWX

TIX

XZO5GPC 415X 17½ 1,000–3,500 80–150 CGX

M05GP 417X 8½,12¼ 1,000–4,500 60–250 GLMX

XZ08GPC 425X 16,17½ 1,000–3,500 80–150 CGLX

MZ08GPC 425X 16,17½ 1,000–3,500 80–250 CGLMX

M08GP 427X 8½,12¼ 1,000–4,500 60–250 GLMX

M1OGP 437X 8½,12¼ 1,000–4,500 60–250 GLMX

X10G 437X 8½,12¼ 1,500–4,500 60–120 GX

X10YG 437Y 8½,12¼ 1,500–4,500 60–120 GYXZ10G 435X 12¼ 1,000–4,000 80–250 GMX

XZ10GC 435X 16,17½ 1,000–3,500 80–150 CGX

MZ10GPC 435X 16,17½ 1,000–3,500 80–250 CGLMX

XZ15G 445X 12¼ 1,000–4,500 80–250 GMX

XZ15GC 445X 16,17½ 1,000–3,500 80–150 CGX

X15G 447X 8½,12¼ 1,500–5,000 60–120 GX

M15GP 447X 8½,12¼ 1,000–5,000 60–250 GLMX

MZ15GPC 445X 16,17½ 1,000–3,500 80–250 CGLMX

Varel

ETR04 415X 16,17½ 1,500–3,500 80–275 W

CR04 415X 17½ 1,500–5,000 60–250 WM

ETD04 417X 97 ⁄ 8 1,500–3,500 60–180 W

CH04 417X 8½,8¾,97 ⁄ 8,12¼ 1,500–5,000 70–250 MW

CH09 427Y 77 ⁄ 8,8¾ 1,500–5,000 70–250 MW

CH12 437X 778,12¼,13½ 1,500–5,000 60–250 MW

CH13 437Y 77 ⁄ 8 1,500–5,000 60–250 MW

CH14 437X 8½,8¾,12¼ 1,500–5,000 60–250 MW

ETD14 437X 12¼ 2,000–4,500 60–160 W

ETR14 435X 12¼,16 ,17½,22 2,500–4,500 80–250 W

ETR18 445X 17,17½ 2,500–4,500 80–250 WCH18 447X 6,77 ⁄ 8,8½ 2,500–6,000 60–250 MW

Fish tail bits

Bit-Tech

DP-440-B1E M131 6¼ 300–2,000 100–500 ADGMVW

RockBit

KDM33FT S121 77 ⁄ 8,8½,8¾,12¼ 500–3,000 80–450 MG

PDC drill bits

Bit-Tech

DP-440-B1 M131 6¼ 300–2,000 100–500 ADGMVW

Dowdco

TM-344 M131 61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8 300–2,000 60–300 DGHMV

TM-255 M223 8½,8¾,97 ⁄ 8,12¼ 250–3,500 50–200 DGHMV

GeoDiamond

M94 M121 77 ⁄ 8,83 ⁄ 8,8½,8¾,9¼, 400–2,000 60–600 GMNUlVW9½,97 ⁄ 8,105 ⁄ 8,12,12¼

M95 M121 61 ⁄ 8,8½ 400–2,000 60–600 GMNUlVW

M96 M121 8½,8¾,97 ⁄ 8,12¼ 400–2,000 60–600 GMNUlVW

M962 M121 8½ 400–2,000 60–600 GMNUlVW

M97 M121 6¼,6¾,97 ⁄ 8,12¼ 400–2,000 60–600 GMNUlVW

S94 S121 57 ⁄ 8,6,61 ⁄ 8,6¼,6¾, 500–3,000 60–600 GMNUlVW8½,97 ⁄ 8,11½,12,12¼

S96 S122 61 ⁄ 8,6¼ 500–3,000 60–600 GMNUlVW

S97 S122 6 500–3,000 60–600 GMNUlVW

S98 S121 6,8½ 400–2,000 60–600 GMNUlVW

SRS983 S121 12¼ 400–2,000 60–600 GMNUlVW

SRS987 S121 12¼ 400–2,000 60–600 GMNUlVW

PS100 S121 17½ 400–2,000 60–600 GMNUlVW

PS192 S121 8½ 400–2,000 60–600 GMNUlVW

QDS91 S223 12¼x14¾, 400–2,000 60–600 GMNUlVW17½x18¾,17x20,16x20,17x22,17½x23

M91 M223 5½,6,77 ⁄ 8,83 ⁄ 8,8½, 400–2,000 60–600 GMNUlVW8¾,97 ⁄ 8,115 ⁄ 8,12¼

M92 M123 77 ⁄ 8,8½,8¾,9½,12¼ 400–2,000 60–600 GMNUIVW

M925 M123 12¼ 400–2,000 60–600 GMNUIVW

M93 M123 61 ⁄ 8–6¾ 400–2,000 60–600 GMNUIVW

M988 M123 61 ⁄ 8,8½,12¼ 400–2,000 60–600 GMNUIVW

MA89 M223 61 ⁄ 8,6¾,67 ⁄ 8,75 ⁄ 8,77 ⁄ 8, 400–2,000 60–600 GMNUlVW83 ⁄ 8,8½,8¾,9½,97 ⁄ 8,105 ⁄ 8,12¼,13½,14¾,16,17½

MDT89 M223 8½,8¾,97 ⁄ 8,12¼, 400–2,000 60–600 DGMNUlVW17½

MRS89 M223 8½,9½,97 ⁄ 8,12¼, 400–2,000 60–600 DGMNUlVW13½,16,17½

MRS891 M223 12¼ 400–2,000 60–600 DGMNUlVWMA982 M223 8½–12¼ 400–2,000 60–600 GMNUlVW

MA985 M123 77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8, 400–2,000 60–600 GMNUlVW12¼,13½,17½,18½

MDT985 M123 12¼ 400–2,000 60–600 GMNUlVW

MRS985 M222 12¼,13½,16,17½ 400–2,000 60–600 DGMNUlVW

QDG90 S123 17x20 200–3,000 60–600 GMNUlVW

QDR90 S123 17x17½ 200–3,000 60–600 GMNUlVW

S90 S123 8½ 400–2,000 60–600 GMNUlVW

S91 S123 61 ⁄ 8,6¾,77 ⁄ 8,8½,8¾, 400–2,000 60–600 GMNUlVW105 ⁄ 8,12¼,13½,13¾,14½,14¾,15½,16,17,17½,18½,20,24

S92 S123 17½ 400–2,000 60–600 GMNUlVW

S983 S121 12¼,14¾,16,17½ 400–2,000 60–600 GMNUlVW

S985 S121 77 ⁄ 8,8½,8¾,97 ⁄ 8,105 ⁄ 8, 400–2,000 60–600 GMNUlVW12¼,16,17,17½,20

S987 S121 77 ⁄ 8,8½,97 ⁄ 8,12¼,16, 400–2,000 60–600 GMNUlVW17½

S988 S121 57 ⁄ 8,6,61 ⁄ 8,6¾,8½, 400–2,000 60–600 GMNUlVW97 ⁄ 8,12¼

S989 S121 8½–12¼ 400–2,000 60–600 GMNUlVWHalliburton Security DBS

FM2365/ M421 8½ 350–2,000 60–400 MVWFM3365

FM2365/ M224 97 ⁄ 8 350–2,000 60–400 MVWFM3365

FM2365/ M124 12¼ 350–2,000 60–400 MVWFM3365

FM2446/ M131 12¼ 500–2,000 60–400 MVWFM3446

FM2465/ M323 6,6¼,8½,97 ⁄ 8,12¼ 200–3,500 60–400 MVWFM3465

FM2466/ M111 12¼ 500–2,000 60–400 MVWFM3466

FM2545/ M333 97 ⁄ 8 500–2,000 60–400 MVWFM3545

FM2563/ M121 18½ 500–2,000 60–400 MVWFM3563

FM2565/ M223 77 ⁄ 8,97 ⁄ 8,8¾,8½,83 ⁄ 8 500–2,000 60–400 MVWFM3565

FM2565/ M423 77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8 500–2,000 60–400 MVW

FM3565FM2566/ M323 12¼ 500–2,000 60–400 MVWFM3566

FM2643/ M331 57 ⁄ 8,6,61 ⁄ 8,6¼,6½, 500 –2,000 60–400 MVWFM3643 6¾,97 ⁄ 8

FM2648/ M231 12,12¼ 500–2,000 60–400 MVWFM3648

FM2662/ M122 17½ 500–2,000 60–400 MVWFM3662

FM2662/ M323 12¼ 500–2,000 60–400 MVWFM3662

FM2664/ M423 8¾ 500–2,000 60–400 MVWFM3664

FM2862/ M121 14¾,17½ 500–2,000 60–400 MVWFM3862

FS2441 S432 6,61 ⁄ 8,6½,6¾,8½ 500–2,000 60–400 MVW

FS2461 S322 8½,97 ⁄ 8,12¼ 500–2,000 60–400 MVW

FS2463 S323 8½,97 ⁄ 8,12¼,14¾ 500–2,000 60–400 MVW

FS2465 S424 8½ 500–2,000 60–400 MVW

FS2467 S424 61 ⁄ 8 500–2,000 60–400 MVW

FS2543 S133 12¼ 500–2,000 60–400 MVW

FS2545 S334 8½ 500–2,000 60–400 MVW

FS2563 S323 97 ⁄ 8,12¼,14½,14¾, 500–2,000 60–400 MVW16,17½

FS2565 S424 8½,97 ⁄ 8,12¼ 500–2,000 60–400 MVW

FS2641 S132 24 500–2,000 60–200 MVW

FS2645 S434 8½,97 ⁄ 8 500–2,000 60–400 MVW

FS2661 S122 26 500–2,000 60–200 MVW

FS2663 S323 12,12¼,13½,16,17, 500–2,000 60–400 MVW17½

FS2665 S124 20,22 500–2,000 60–200 MVW

SE3321A S442 3¾ 200–1,000 60–400 DVW

SE3431 M133 3½–4¾ 200–1,000 60–400 DVW

SE3442 M432 6,61 ⁄ 8 200–2,000 60–400 DVW

SE3461 M422 6–12¼ 200–3,000 60–400 DVW

SE3463A S433 12¼ 500–2,000 60–400 DVW

Hughes Christensen

HC404 M233 37 ⁄ 8–17½ 235–2,500 60–350 DGMWV

HCM404 M233 37 ⁄ 8–17½ 235–2,500 60–350 DGMWV

HCR404 M233 37 ⁄ 8 –17½ 235–2,500 60–350 DGWV

HC603 M223 61 ⁄ 8,8½,12¼ 235–2,500 60–350 DGMWV

HC604 M223 6–17½ 235–2,500 60–350 DGMWV

HCM604 M223 6–17½ 235–2,500 60–350 DGMWV

HCR604 M223 6–17½ 235–2,500 60–350 DGWV

NQL (formerly DPI)

CSD+044 S133 16½x19½,17x21½, 4,000–4,200 60–200 DGHKMVWBi-center 18x22

CSD+144 S133 12¼x14¾,13½x16 4,000–4,200 60–200 DGHKMVWBi-center

CSD+322 S133 8½x9½ 3,500–3,800 60–200 DGHKMVWBi-center

CSD022 S133 12¼x14¾ 4,200–4,500 60–200 DGHKMVBi-center

CSD044 S133 10¼x122 ⁄ 3,18x22 4,500–4,800 60–200 DGHKMVBi-center

CSD222 S133 105 ⁄ 8x12¼ 3,600–4,000 60–200 DGHKMVBi-center

CSD322 S133 6x7,8½x9½, 3,000–3,800 60–200 DGHKMVBi-center 105 ⁄ 8x115 ⁄ 8,

CSD422 S233 4¾x55 ⁄ 8 2,000–2,800 60–200 DGHKMVBi-center

SP2B S433 37 ⁄ 8 200–1,500 60–450 DHKMV

PDC-Gearhart

MR1333 M111 6,61 ⁄ 8,6¼,6½,6¾ 300–2,000 60–250 GHWUlM

MR1344 M123 61 ⁄ 8,6¼,6½,6¾ 300–2,000 60–250 GHWUlM

MS1944 M123 6½,77 ⁄ 8,12¼ 300–2,000 60–250 GHWUlM

Precise

S446L S123 37 ⁄ 8,4¾,6,61 ⁄ 8,6¼, 500–4,500 40–1,000 V6½,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

S446M S223 37 ⁄ 8,4¾,6,61 ⁄ 8,6¼, 500–4,500 40–1,000 V6½,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼


DS149 M132 6¼ 300–3,000 Variable GHMWUl

DS172D M132 61 ⁄ 8–6¼ 300–3,000 Variable GHMWUl

DS117 M221 8½–12¼ 300–3,000 Variable GHMWUl

DS185 M222 6¾ 300–3,000 Variable GHMWUl

DS104H M223 6¼–17½ 300–3,000 Variable GHMWUl

DS187 M223 17½ 300–3,000 Variable GHMWUl

DS204 S121 12¼ 300–3,000 Variable GHMWUl

DS40H S121 & 6–18½ 300–3,000 Variable GHMWUlS324

DS206 S123 61 ⁄ 8–6¾ 300–3,000 Variable GHMWUl

DS198 S132 4¾ 300–3,000 Variable GHMWUl

DS100H S133 25 ⁄ 8x215 ⁄ 16–105 ⁄ 8x12¼ 300–3,000 Variable GHMWUl

DS181 S221 17½x26 300–3,000 Variable ConcentricHole Opener

DS61H S221 8½–17½ 300–3,000 Variable GHMWUlDS105D S222 57 ⁄ 8–8½ 300–3,000 Variable GHMWUlV

DS105H S222 57 ⁄ 8–12¼ 300–3,000 Variable GHMWUl

DS68 S223 57 ⁄ 8–8¾ 300–3,000 Variable GHMWUl

DS53H S231 8½–13½ 300–3,000 Variable GHMWUl

RS220D S231 12¼ 300–3,000 Variable GHMWUlRotary

Steerable

RockBit

KDM33FT S121 77 ⁄ 8–12¼ 500–3,000 80–450 MG

KD3419 S213 6,61 ⁄ 8,6¼,77 ⁄ 8,8½, 500–2,500 60–450 GHMVW8¾,97 ⁄ 8,12¼

KD3519 S223 6,61 ⁄ 8,6¼,77 ⁄ 8,8½, 500–2,501 60–450 GHMVW8¾,97 ⁄ 8,12¼

KDS11 S233 77 ⁄ 8–17½ 250–2,500 100–500 M

Tri-Max

S-1 S315 6–17½ 1,000–3,000 80–200 DGM

S-1S S315 6–17½ 1,000–2,000 80–200 DGM

Q-2 S644 8½–17½ 1,000–2,000 80–200 DGM

EWD 37 ⁄ 8x4¾,43 ⁄ 8x6,6x7¼, No No Underreamer8½x97 ⁄ 8,105 ⁄ 8x12¾, Limits Limits (Enlarge-12¼x14¾, While-14¾x17½,17½x21 Drilling)





I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e


United Diamond

UD419, S612 8½,97 ⁄ 8,12¼ 500–2,900 30–600 MGVU1UD425,UD525

UD516RR S915 6¼,77 ⁄ 8,8½,8¾,12¼, 500–4,500 30–600 MGVUm

Varel

MKF74 M123 8½ 500–2,000 60–400 GMW

MKS54 M132 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–2,000 60–400 GMW8½,8¾

MKS66 M323 8½,12¼ 500–2,000 60–400 GMW

MKS74 M123 6,61 ⁄ 8,6¾,77 ⁄ 8,8½, 500–2,000 60–400 GMW83 ⁄ 8,8¾,97 ⁄ 8,105 ⁄ 8,12¼,13¾

MKS75 M222 77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8, 500–2,000 60–400 GMW105 ⁄ 8,12¼,13¾

MKS76 M323 77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8, 500–2,000 60–400 GMW105 ⁄ 8,12¼,13¾,17½

SKO76 S111 12¼ 100–2,000 60–120 GMW

SKS66 S123 17½ 100–2,001 60–121 GMW

SKS74 S223 8½,12¼ 500–2,000 60–400 GMW

SKS76 S111 97 ⁄ 8,12¼,16,17½ 100–2,000 60–120 GMW

SKS78 S123 26 100–2,000 60–120 GMW

VB422M M211 12¼ 250–2,500 60–600 GMWFKQUm

VB322S S111 8½,8¾ 250–2,500 150–600 GHMW-FKQUm

VB422M M111 83

⁄ 8,8½,8¾ 250–3,000 150–600 GHMW-FKQUm

MBC56 M233 4¾x55 ⁄ 8,8½x97 ⁄ 8, 200–1,700 60–400 GMWBi-center 8½x9½

MBC57 M233 5½x6,55 ⁄ 8x63 ⁄ 8, 200–1,700 60–400 GMWBi-center 83 ⁄ 8x97 ⁄ 8,8½x97 ⁄ 8

MBC58 M233 57 ⁄ 8x7,6x7,6½x7½, 200–1,700 60–400 GMWBi-center 12x14½,12x14,

12¼x14¾

MBC76 M323 97 ⁄ 8x11¾,105 ⁄ 8x12¼, 200–1,700 60–400 GMWBi-center 12x14,12¼x14¾,

12¼x13½

MBC77 M323 6¾x7½,83 ⁄ 8x8¾, 200–1,700 60–400 GMWBi-center 12¼x13½

MBC78 M323 105 ⁄ 8x12¼, 200–1,700 60–400 GMWBi-center 14½x17½

PDC coring bits

Baker Hughes INTEQ

ARC412 M354 4¾–12¼ 400–2,000 50–500 Low Inv VGMF

ARC422 NA 8½–12¼ 850–1,250 50–500 Low Inv VGMF

RC412 M354 4¾–12¼ 400–2,000 50–200 Low Inv F

RC414 M355 4¾x12¼ 400–2,350 50–500 Short MFBHC406 TBD 4¾x12¼ 300–2,400 50–500 Low Inv

VGMFR

Bit-Tech

CP-440-BU M342 6,61 ⁄ 8 300–2,000 50–500 AFGMVW

CP-440-BU M232 77 ⁄ 8,8½,8¾ 300–2,000 50–500 AFGMVW

CP-440E M342 77 ⁄ 8,8½,8¾ 300–2,000 60–120 AFG


CD 73 M233 6–12¼ 250–3,500 50–150 F

CSP 107 S234 6–12¼ 250–3,500 50–150 F

FC3443 M243 8½–12¼ 250–3,500 50–150 F

FC3643 M233 6–12¼ 250–3,500 50–150 F

FC3647 M233 6–12¼ 250–3,500 50–150 F

FC3943A S234 6–121 ⁄ 5 250–3,500 50–150 F

RockBit

KDC675 S883 8½–12¼ 400–3,350 50–200 ILO

KDC66 S884 4¾–12¼ 400–3,350 40–150 ILO

KDC6CH S884 4¾–12¼ 400–3,350 40–150 ILO

KDC675 S883 8½–12¼ 400–3,350 50–200 ILO

KDC66 S884 4¾–12¼ 400–3,350 40–150 ILO

KDC6CH S884 4¾–12¼ 400–3,350 40–150 ILOVarel

C100 M232 57 ⁄ 8–12¼ 100–2,000 60–120 GUI

C60 M232 57 ⁄ 8–12¼ 100–2,000 60–120 GUI

CK54 M132 8½ 100–2,000 60–120 GUI

CK74 M122 8½ 100–2,000 60–120 GUI

Casing/Liner PDC drill bits

Hughes Christensen

ECZ304 S233 6,61 ⁄ 8,6½,6¾,8½, 235–2,500 60–350 W97 ⁄ 8,12¼,17½,20,24

ECZ306 S333 6,61 ⁄ 8,6½,6¾,8½, 235–2,500 60–350 W97 ⁄ 8,12¼,17½,20,24

ECZ404 S233 6¾,8½,97 ⁄ 8,12¼, 235–2,500 60–350 W17½,20,24

ECZ406 S343 6¾,8½,97 ⁄ 8,12¼, 235–2,500 60–350 W17½,20,24

PDC cutters

Baker Hughes INTEQ

BHC607 TBD 12¼ 400–3,000 50–500 Low Inv VGMFR

Surface set diamond coring bits

Bit-Tech

CN321BL M613 61 ⁄ 8 300–2,000 60–120 AGMR


CSD120 S134 6–12¼ 250–3,500 50–150 FCT103UF M423 8½ 250–3,500 50–150 F

Soft-MediumSteel tooth roller cone bits

Hughes Christensen

ATJ-4 216 4¾,57 ⁄ 8,6,61 ⁄ 8 2,000–5,000 80–180 SW

ATJ-G4 217 77 ⁄ 8,8¾ 2,000–5,000 80–180 SW

DR5 221 3¾,37 ⁄ 8,41 ⁄ 8,45 ⁄ 8,4¾ 1,000–4,000 60–250 S

TIX

MSS 131 57 ⁄ 8,6,61 ⁄ 8,6¼,7½,75 ⁄ 8 1,500–4,000 60–130

MSS 131 83 ⁄ 8,8½,85 ⁄ 8,8¾,9, 1,500–5,000 60–1309½,95 ⁄ 8,97 ⁄ 8,105 ⁄ 8,11,115 ⁄ 8,12¼

MSS 131 133 ⁄ 8,13¾,14¾,15, 1,500–4,000 60–13017½,20,22,23,24,26

MSS-X 136 57 ⁄ 8,6,61 ⁄ 8,6¼,77 ⁄ 8 2,000–4,000 60–120 B

MSS-X 136 83 ⁄ 8,8½,8¾,95 ⁄ 8,97 ⁄ 8, 2,000–5,000 60–120 B105 ⁄ 8,115 ⁄ 8,12,12¼

MSS-X 136 15½,17½ 2,000–4,000 60–120 B

MSS-TX 137 57 ⁄ 8,6,77 ⁄ 8 2,000–4,000 60–120 BG

MSS-TX 137 8½,97 ⁄ 8,115 ⁄ 8,12¼ 2,000–5,000 60–120 BG

MSS-TZ 135 83 ⁄ 8,8½,95 ⁄ 8,97 ⁄ 8,105 ⁄ 8, 2,000–4,500 60–120 G115 ⁄ 8

MSS-Z 134 83 ⁄ 8,8½,95 ⁄ 8,97 ⁄ 8,105 ⁄ 8, 2,000–4,500 60–110 G115 ⁄ 8,12¼

MSS-Z 134 17½ 1,500–3,500 60–110 G

MSS-XZ 134 12¼ 1,500–4,500 60–250 M

MSS-XZ 134 17½ 1,500–3,500 60–150

MSS-TMZ 135 16,17½ 1,500–3,500 60–250 GM

Tri-Max

TM121 121 6–17½ 1,500–3,000 80–150

TM124 124 6–17½ 2,000–4,000 80–150

TM125 125 6–17½ 2,000–4,000 80–150

TM126 126 6–17½ 2,000–4,000 80–150 B

TM131 131 6–17½ 2,000–3,000 80–150

TM134 134 6–17½ 1,500–4,000 80–150

TM135 135 6–17½ 2,000–4,000 80–150

TM136 136 6–17½ 2,000–4,000 80–150

TM137 137 6–17½ 2,000–5,000 80–150 B



FEBXL(D)20 517 12¼ 2,000–6,000 50–250 BWC

EBXS(D)18- 517 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–6,000 50–250 BWEBXS(D)23 6½,6¾,77 ⁄ 8,83 ⁄ 8,8½,

8¾,97 ⁄ 8,105 ⁄ 8,12¼

EBXS(D)24- 527 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–6,000 50–250 BWEBXS(D)27 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

EBXS(D)28- 537 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–7,000 40–220 BWEBXS(D)33 6½,6¾,77 ⁄ 8,83 ⁄ 8,8½,

8¾,97 ⁄ 8,105 ⁄ 8,12¼

EBXS(D)34- 547 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–7,000 40–220 BWEBXS(D)39 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

EBXT(D)18- 515 13½,14¾,16,17½, 2,000–6,000 50–250 BWEBXT(D)23 20,22,24,26,28

EBXT(D)24- 525 13½,14¾,16,17½, 2,000–6,000 50–250 BWEBXT(D)27 20,22,24,26,28

EBXT(D)28- 535 13½,14¾,16,17, 3,000–7,000 40–220 BWEBXT(D)33 17½,20,22,24,26,28

EBXT(D)34- 545 13½,14¾,16,17½, 3,000–7,000 40–220 BW

EBXT(D)39 20,22,24,26,28XS(D)18- 517 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–6,000 50–250 BWXS(D)23 6½,6¾,77 ⁄ 8,83 ⁄ 8,8½,

8¾,97 ⁄ 8,105 ⁄ 8,12¼

XS(D)24- 527 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–6,000 50–250 BWXS(D)27 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

XS(D)28- 537 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–7,000 40–220 BWXS(D)33 6½,6¾,77 ⁄ 8,83 ⁄ 8,8½,

8¾,97 ⁄ 8,105 ⁄ 8,12¼

XS(D)34- 547 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–7,000 40–220 BWXS(D)39 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

XT(D)18- 515 13½,14¾,16,17½, 2,000–6,000 50–250 BWXT(D)23 20,22,24,26,28

XT(D)24- 525 13½,14¾,16,17½, 2,000–6,000 50–250 BWXT(D)27 20,22,24,26,28

XT(D)28- 535 13½,14¾,16,17, 3,000–7,000 40–220 BWXT(D)33 17½,20,22,24,26,28

XT(D)34- 545 13½,14¾,16,17½, 3,000–7,000 40–220 BWXT(D)39 20,22,24,26,28

Hughes Christensen

STX-20 527 3¾,4¾,47 ⁄ 8,55 ⁄ 8,61 ⁄ 8, 1,000–6,000 40–220 BGMW6¼,6½,6¾

STX-20G 527 61 ⁄ 8,6¼ 1,000–6,000 40–220 BGMW

MX-20 527 6¼,83 ⁄ 8,8½,8¾,9½, 1,000–6,000 40–220 BGMW97 ⁄ 8,105 ⁄ 8,12,12¼,17½

MX-20G 527 83 ⁄ 8,8½,8¾,105 ⁄ 8, 1,000–6,000 40–220 BGMW12¼

MX-20C 527 8½,9½,14¾ 1,000–6,000 40–220 BGMW

MX-20/20H 527 6,61 ⁄ 8,6½,77 ⁄ 8,8½, 1,000–6,000 40–220 BGMW8¾,97 ⁄ 8,14½,17½

MX-22 527 12¼,16 1,000–6,000 40–220 BGMW

MX-28 537 77 ⁄ 8,8½,8¾,9½,12, 1,000–6,000 40–220 BGMW12¼,14¾

MX-30 537 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 1,000–6,000 40–220 BGMW83 ⁄ 8,8½,97 ⁄ 8,115 ⁄ 8,17½

MX-30C 537 8¾ 1,000–6,000 40–220 BGMW

MX-30H 537 8½,12¼,17½ 1,000–6,000 40–220 BGMW

MX-35C 547 8½,12 1,000–6,000 40–220 BGMW

MX-30G 537 83 ⁄ 8,8½,8¾,9½,115 ⁄ 8, 1,000–6,000 40–220 BGMW12¼

MX-35 547 61 ⁄ 8,6¼ 1,000–6,000 40–220 BGMW

MX-35CG 547 83 ⁄ 8,8½,12¼ 1,000–6,000 40–220 BGMW

MX-38C 547 97

⁄ 8

1,000–6,000 40–220 BGMWHX-20 517 77 ⁄ 8,8½,8¾ 1,000–6,000 50–220 EGW

HX-20CJ 517 77 ⁄ 8 1,000–6,000 50–220 EGW

HX-28C 527 77 ⁄ 8 1,000–6,000 50–220 EGW

HX-28 527 77 ⁄ 8,8¾ 1,000–6,000 50–220 EGW

HX-30 537 77 ⁄ 8,8½,8¾ 1,000–6,000 50–220 EGW

H-20B 517 77 ⁄ 8 1,000–6,000 50–220 EGW

H-28 527 8¾ 1,000–6,000 50–220 EGW

H-30C 537 77 ⁄ 8,8½,8¾,12¼ 1,000–6,000 50–220 EGW

H-30CG 537 8½ 1,000–6,000 50–220 EGW

HR-30 537 77 ⁄ 8 2,000–6,000 50–120 GW

HR-30C 537 77 ⁄ 8,8½,8¾,11,12¼ 2,000–6,000 50–120 GW

HR-33CH 537 77 ⁄ 8 2,000–6,000 50–120 GW

HR-35 547 77 ⁄ 8,8¾,97 ⁄ 8,12¼ 2,000–6,000 50–120 GW

HR-35C 547 77 ⁄ 8,8¾ 2,000–6,000 50–120 GW

HR-38C 547 77 ⁄ 8,8½,8¾,97 ⁄ 8 2,000–6,000 50–120 GW

HR-38CH 547 77 ⁄ 8,8¾ 2,000–6,000 50–120 GW

GT-20 517 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼, 2,000–6,000 50–120 W17½

GT-20C 527 77 ⁄ 8,8½,12¼ 2,000–6,000 50–120 WY

GT-20S 517 8¾ 2,000–6,000 50–120 W

GX-20 517 77 ⁄ 8 2,000–6,000 50–120 WGX-25 517 77 ⁄ 8 2,000–6,000 50–120 W

STX-20 517 3¾,4¾,6,61 ⁄ 8,6¼, 2,000–5,000 80–250 GHW6½,6¾

STX-20G 517 61 ⁄ 8 2,000–5,000 80–250 GHW

STX-20H 517 6 2,000–5,000 80–250 GHW

STX-30 537 3¾,37 ⁄ 8,41 ⁄ 8,4½,4¾, 2,000–5,000 80–250 GHW55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾

STX-30C 537 41 ⁄ 8,4¾,6,61 ⁄ 8,6½ 2,000–5,000 80–250 GHW

STX-35 547 4½,61 ⁄ 8 2,000–5,000 80–250 GHW

STR-30 537 37 ⁄ 8,61 ⁄ 8 2,000–5,000 80–250 GHW

GT-28 527 77 ⁄ 8,12¼ 2,000–5,000 40–110 W

GT-28C 527 77 ⁄ 8,11,12¼ 2,000–5,000 40–110 W

GT-30 537 77 ⁄ 8,8¾,9½,97 ⁄ 8 2,000–5,000 40–110 W

GT-30C 547 8½ 2,000–5,000 40–110 W

GT-30H 547 8½ 2,000–6,000 50–120 W

GTX-20 515 17½,22,24,26 3,000–5,500 40–120 Y

GTX-20C 525 16 3,000–5,500 40–120 Y

GTX-20G 527 23 3,000–5,500 40–120 Y

GTX-22 527 20 3,000–5,500 40–120 YGTX-30C 545 8½ 3,000–5,500 40–120 Y

GTX-33 545 17½ 3,000–5,500 40–120 Y

GTX-30H 545 17½ 3,000–5,500 40–120 Y

XL-30A 537 6¼,77 ⁄ 8,8½,11 3,000–6,000 40–180 AC

RBI-Gearhart

C2 517X 37 ⁄ 8,4¾,5½,55 ⁄ 8,57 ⁄ 8, 2,000–5,000 50–240 ACEGHLMT6,61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

B2LRGSP 517X 41 ⁄ 8,4½,4¾,5½,57 ⁄ 8, 2,000–5,000 50–240 AGHLM6,61 ⁄ 8,6¼,6½

C2 515X 17½ 2,000–5,000 50–240 ACEGKLMT

C2A 517X 77 ⁄ 8 2,000–5,000 50–240 ACEHLM

C2H 517X 77 ⁄ 8,8½,8¾,12¼ 2,000–5,000 50–240 ACEHLM

C2HLRGSP 517X 77 ⁄ 8,8½,8¾,12¼ 2,000–5,000 50–240 ACEHLM

C2LRGSP 517X 37 ⁄ 8,4¾,5½,55 ⁄ 8,57 ⁄ 8, 2,000–5,000 50–240 ACEGHLMT6,51 ⁄ 8,6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C2VLRGSP 517X 57 ⁄ 8,6,51 ⁄ 8,6¼,6½, 2,000–5,000 50–240 ACEGHLMT6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C21RLRGSP 5 17X 77 ⁄ 8 2,000–5,000 50–240 ACEGHLMTC22LRGSP 517Y 77 ⁄ 8 2,000–5,000 50–240 ACEGHLMT





I A D C c o d e



l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e


C25LRGSP 537X 77 ⁄ 8,8½,8¾,12¼ 2,000–5,000 50–240 ACEGHLMT

C26LRGSP 527X 77 ⁄ 8,8¾ 2,000–5,000 50–240 ACEGHLMT

C27 527Y 57 ⁄ 8,6,51 ⁄ 8,6¼,6½, 2,000–5,000 50–240 ACEGHMT6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C27LRGSP 527Y 57 ⁄ 8,6,51 ⁄ 8,6¼,6½, 2,000–5,000 50–240 ACEGHMT6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

B27LRGSP 527Y 3½,3¾,41 ⁄ 8,4¾, 2,000–5,000 50–240 AGHLM

C28LRGSP 517X 77 ⁄ 8,8¾,12¼ 2,000–5,000 50–240 ACEGHLMT

C3 537X 37 ⁄ 8,4¾,5½,55 ⁄ 8,57 ⁄ 8, 2,500–5,500 50–240 ACEGHLM6,51 ⁄ 8,6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C3LRGSP 537X 37 ⁄ 8,4¾,5½,55 ⁄ 8,57 ⁄ 8, 2,500–5,500 50–240 ACEGHLM6,51 ⁄ 8,6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

B3LRGSP 537X 2¾,27 ⁄ 8,45 ⁄ 8,4¾,6, 2,500–5,500 50–240 AGHLM61 ⁄ 8,6¼,6½

C3VLRGSP 537X 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,500–5,500 50–240 ACEGHM6½,6¾,77 ⁄ 8,8½,8¾,12¼

C33 537X 77 ⁄ 8 2,000–5,000 50–240 ACGHLM

C34LRGSP 537X 8¾ 2,000–5,000 50–240 ACEGHLMT

C35LRGSP 537X 77 ⁄ 8,8½,8¾,12¼ 2,000–5,000 50–240 ACEGHLMT

C37 537Y 57 ⁄ 8,6,61 ⁄ 8,6¼,6½, 2,500–5,500 50–240 ACEGHLM6¾,77 ⁄ 8,8½,8¾,12¼

C37LRGSP 537Y 37 ⁄ 8,4¾,57 ⁄ 8,6,61 ⁄ 8, 2,500–5,500 50–240 ACEGHM6¼,6½,6¾,77 ⁄ 8,8½,8¾,12¼

C37LRGSP 537Y 5½,55 ⁄ 8,7½,97 ⁄ 8 2,500–5,500 50–240 ACEGHM

B37LRGSP 537Y 41 ⁄ 8,4¼,4¾,55 ⁄ 8,5¾, 2,500–5,500 50–240 AGHLM6,61 ⁄ 8,6¼,6½


HP51 517 8½ 2,000–5,000 60–200 Y

HP51A 517 8½,12¼ 2,000–5,000 60–200 X

HP51H 517 83 ⁄ 8,12¼ 2,000–5,000 60–200 X

HP51X 517 77 ⁄ 8,8¾ 2,000–5,000 60–180 X

SL51H 517 4½,4¾,47 ⁄ 8,57 ⁄ 8,6, 2,000–5,000 60–200 X61 ⁄ 8,6¼,6½,6¾

HP52 527 77 ⁄ 8 2,000–5,500 50–180 Y

HP52A 527 77 ⁄ 8 2,000–5,500 50–180 X

HP52X 527 77 ⁄ 8 2,000–5,500 50–180 X

TD52 527 77 ⁄ 8,8¾ 2,000–5,500 50–180 YW

TD52A 527 77 ⁄ 8,8½,8¾ 2,000–5,500 50–180 XW

TD52H 527 12¼ 2,000–5,500 50–180 XW

TD52I 527 8¾ 2,000–5,500 50–180 XW

TD52X 527 77

⁄ 8,8¾,97

⁄ 8 2,000–5,500 50–180 XWEHP53 537 8½ 2,000–6,000 50–90 Y

EHP53A 537 8½,12¼ 2,000–6,000 50–90 X

HP53 537 77 ⁄ 8,11 2,000–6,000 50–90 Y

HP53A 537 77 ⁄ 8,83 ⁄ 8,8½,97 ⁄ 8, 2,000–6,000 50–90 X115 ⁄ 8,12,12¼

HP53H 537 77 ⁄ 8,11 2,000–6,000 50–90 X

SL53 537 57 ⁄ 8,6,61 ⁄ 8,6¼,6¾ 2,000–6,000 50–90 Y

SL53A 537 3¾,37 ⁄ 8,4½,4¾,45 ⁄ 8, 2,000–6,000 50–90 X47 ⁄ 8,5½,55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾

TD53 537 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 2,000–6,000 50–90 YW

TD53A 537 77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8, 2,000–6,000 50–90 XW12¼

TD53H 537 77 ⁄ 8 2,000–6,000 50–90 XW

TD54 547 77 ⁄ 8 2,500–7,500 50–90 X

EMS51A 515M 16,17½ 2,000–3,500 60–350 CGMNY

EMS51H 515M 12¼,14,14½,15½ 2,000–3,500 60–350 CGMNY

T51 515M 12¼,14¾,16,17½ 2,000–3,500 60–350 CGMNY

D51 517W 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 2,000–5,000 60–180 Z,W,M,G,H

EHP51 517W 8½ 2,000–5,000 60–200 Y

EHP51A 517W 8½ 2,000–5,000 60–200 GWX

EHP51H 517W 105 ⁄ 8,12¼ 2,000–5,000 60–200 X

TD51 517W 97 ⁄ 8,12¼ 2,000–5,000 60–200 YW

TD51A 517W 77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8, 2,000–5,000 60–200 XW12¼

TD51H 517W 77 ⁄ 8,83 ⁄ 8,8¾,12¼ 2,000–5,000 60–200 XW

TD51X 517W 77 ⁄ 8,8¾ 2,000–5,000 60–200 XW

EMS52H 525M 16 2,000–5,000 50–450 CGMNY

T52 525M 16 2,000–5,000 50–450 CGMNYW

EMS53 535M 17½ 2,000–3,500 50–450 CGMNY

EMS53A 535M 15½,17½ 2,000–3,500 50–450 CGMNY

ETS53A 535M 17½ 2,000–3,500 50–450 CGMNY

T53 535M 14¾ 2,000–3,500 50–450 CGMNYW

JA53 537A 77 ⁄ 8 2,000–6,000 50–90 AGX

D53 537W 8¾,97 ⁄ 8 2,000–6,000 50–90 Z,W,H,G

ETS61A 615M 115 ⁄ 8 2,000–3,500 50–450 CGMNY

Smith

F15H 517X 8¾ 2,000–5,500 50–160 X

F15HT 517X 77 ⁄ 8 2,000–5,000 50–160 X

F15HV 517X 77 ⁄ 8,8¾ 2,000–5,000 50–160 X

F17YV 517Y 77 ⁄ 8 2,000–6,000 50–160 YF2 517X 8½,97 ⁄ 8,105 ⁄ 8,12¼ 2,000–5,000 50–160 X

F20T 517X 12¼ 2,000–5,000 50–160 X

F20TOD 517X 12¼ 2,000–5,000 50–160 WX

F25 517X 77 ⁄ 8 2,000–6,000 50–160 X

F25W 517X 12¼ 2,000–6,000 50–160 X

F25YV 517Y 12¼ 2,000–6,000 50–160 Y

F26OD 527X 12¼ 2,000–5,000 50–160 WX

F26Y 527Y 77 ⁄ 8 2,000–7,000 50–160 Y

F27 527Y 77 ⁄ 8,11,12¼ 2,000–7,000 50–160 Y

F27A 527Y 77 ⁄ 8 2,000–7,000 50–160 Y

F27I 527Y 77 ⁄ 8,8¾ 2,000–7,000 50–160 Y

F27IOD 527Y 8¾ 2,000–7,000 50–160 WY

F27IYV 527Y 77 ⁄ 8,8¾ 2,000–7,000 50–160 Y

F27V 527Y 77 ⁄ 8 2,000–7,000 50–160 Y

F2H 517X 77 ⁄ 8,8¾ 2,000–5,000 50–160 X

F2HV 517X 8¾ 2,000–5,000 50–160 X

F2OD 517X 8½ 2,000–5,000 50–160 WX

F2V 517X 97 ⁄ 8 2,000–5,000 50–160 X

F3 537X 8½,97 ⁄ 8,115 ⁄ 8,12¼ 2,500–6,000 50–160 X

F30Y 537X 77 ⁄ 8 2,500–6,000 50–160 X

F30T 537X 8¾ 2,500–6,000 50–160 X

F30TV 537X 8¾ 2,500–6,000 50–160 X

F30WTV 537X 8¾ 2,500–6,000 50–160 X

F35 547X 77 ⁄ 8,8¾ 2,500–6,000 50–160 X

F35OD 547X 77 ⁄ 8,8¾ 2,500–6,000 50–160 WX

F37 547Y 77 ⁄ 8,8½,8¾,97 ⁄ 8,11, 3,000–7,000 50–160 Y

12¼F37D 547Y 77 ⁄ 8,8¾,12¼ 3,000–7,000 50–160 WY

F37H 547Y 77 ⁄ 8,8¾ 3,000–7,000 50–160 Y

F37HOD 547Y 77 ⁄ 8,8¾ 3,000–7,000 50–160 WY

F37HY 547Y 77 ⁄ 8 3,000–7,000 50–160 Y

F37OD 547Y 8½,8¾,97 ⁄ 8,12¼ 3,000–7,000 50–160 WY

F38Y 547Y 77 ⁄ 8 3,000–7,000 50–160 Y

F3D 537X 97 ⁄ 8 2,500–7,000 50–160 WX

F3H 537X 77 ⁄ 8,8¾ 2,500–7,000 50–160 X

F3HOD 537X 77 ⁄ 8,8¾ 2,500–7,000 50–160 WX

F3HV 537X 77 ⁄ 8,8¾ 2,500–7,000 50–160 X

F3OD 537X 8½,97 ⁄ 8,12¼ 2,500–6,000 50–160 WX

F3V 537X 97 ⁄ 8 2,500–6,000 50–160 X

F20V 77 ⁄ 8 2,000–5,000 50–160 X

F21YV 77 ⁄ 8 2,000–5,000 50–160 Y

F23V 77 ⁄ 8 2,000–5,000 50–160 X

F24YV 77 ⁄ 8 2,000–7,000 50–160 Y

F27YV 77 ⁄ 8 2,000–7,000 50–160 Y

F28OD 77 ⁄ 8 2,000–6,000 50–160 WX

F28ODV 77 ⁄ 8 2,000–6,000 50–160 WX

F28V 77

⁄ 8,8½,8¾,9½ 2,000–6,000 50–160 XF30OD 8½,8¾ 2,500–6,000 50–160 WX

F30ODV 77 ⁄ 8 2,500–6,000 50–160 WX

F30V 77 ⁄ 8 2,500–6,000 50–160 X

F31OD 8¾ 2,500–6,000 50–160 WX

F31V 8¾ 2,500–6,000 50–160 X

F37Y 77 ⁄ 8 3,000–7,000 50–160 Y

FS30TODV 537X 8¾ 2,500–6,000 50–160 WX

G20 515X 17½ 1,000–5,000 50–300 BGHMX

G20BDV 515X 12¼ 1,000–5,000 50–300 BGHMWX

G20TD 515X 16,17 1,000–5,000 50–300 BGHMX

G20TDOD 515X 17½ 1,000–5,000 50–300 BGHMWX

G25SD 515X 14¾ 1,000–5,000 50–300 BGHMWX

G26DBDOD 527X 12¼ 2,000–5,000 50–300 BGHMWX

G26TDY 525Y 16 2,000–6,000 50–300 BGHMY

GF20 517X 8½,115 ⁄ 8 2,000–5,000 50–280 BGHMX

GF20BDV 517X 12¼ 2,000–5,000 50–280 BGHMWX

GF20BODV 517X 12¼ 2,000–5,000 50–280 BGHMWX

GF20BV 517X 12¼ 2,000–5,000 50–280 BGHMX

GF20OD 517X 8½ 2,000–5,000 50–280 BGHMWX

GF20SD 517X 12¼ 2,000–5,000 50–280 BGHMWXGF20T 517X 12¼ 2,000–5,000 50–280 BGHMX

GF20TD 517X 12¼ 2,000–5,000 50–280 BGHMX

GF20TDOD 517X 12¼,12½ 2,000–5,000 50–280 BGHMWX

GF20WTD 517X 12¼ 2,000–5,000 50–280 BGHMX

GF25 517X 8½ 2,000–5,000 50–280 BGHMX

GF25OD 517X 8½ 2,000–5,000 50–280 BGHMWX

GF26BDOD 517X 12¼ 2,000–5,000 50–280 BGHMWX

GF26BOD 517X 12¼ 2,000–5,000 50–280 BGHMWX

GF26DOD 517X 12¼ 2,000–5,000 50–280 BGHMWX

GF26HBOD 517X 12¼ 2,000–5,000 50–280 BGHMWX

GF26OD 527X 12¼ 2,000–5,000 50–280 BGHMWX

GF26SD 527X 12 2,000–5,000 50–280 BGHMWX

GF26TD 527X 12¼ 2,000–5,000 50–280 BGHMWX

GF28BDOD 527Y 12¼ 2,000–5,000 50–280 BGHMWY

GF28YBDOD 527Y 12¼ 2,000–5,000 50–280 BGHMWY

GF30B 537X 12¼ 2,000–5,000 50–280 BGHMX

GF30BV 537X 12¼ 2,000–5,000 50–280 BGHMX

GF30H 537X 8¾ 2,500–6,000 50–280 BGHMX

GF30SDG 537X 8½ 2,500–6,000 50–280 BGHMWX

GF37 547Y 8¾ 2,000–6,000 50–280 BGHMY

GF20SDG 8½ 2,000–5,000 50–280 BGHMWXGF30 8½ 2,500–6,000 50–280 BGHMX

GF30OD 8½ 2,500–6,000 50–280 BGHMWX

GFS20 517X 12¼ 2,000–5,000 50–280 BGHMX

GFS20BDODV 517X 12¼ 2,000–5,000 50–280 BGHMWX

GFS20OD 517X 12¼ 2,000–5,000 50–280 BGHMWX

GFS20TD 517X 12¼ 2,000–5,000 50–280 BGHMX

GFS26OD 527X 12¼ 2,000–5,000 50–280 BGHMWX

GFS30BODV 537X 12¼ 2,000–5,000 50–280 BGHMWX

GFS30GV 8½ 2,500–6,000 50–280 BGHMX

GFS30ODV 8½ 2,500–6,000 50–280 BGHMWX

GS20TD 515X 16,17 1,000–5,000 50–300 BGHMX

GS26B 525X 12¼ 2,000–6,000 50–300 BGHMX

GS20BDV 16 1,000–5,000 50–300 BGHMWX

M20T 515X 12¼ 1,000–5,000 50–280 HMX

M30W 535X 14¾ 2,000–6,000 50–280 HMX

MA1SL 515T 12¼,16 1,000–4,000 50–280 HMTX

MF15H 517X 57 ⁄ 8 2,000–5,000 50–250 HMX

MF2 517X 4¾,47 ⁄ 8,5½,115 ⁄ 8 2,000–5,000 50–250 HMX

MF20DDPD 517X 83 ⁄ 8,8½ 2,000–5,000 50–250 GHMWX

MF20SD 517X 83 ⁄ 8,8½,12¼ 2,000–5,000 50–250 GHMWX

MF20T 517X 8½ 2,000–5,000 50–250 HMX

MF20TD 517X 83 ⁄ 8,8½ 2,000–5,000 50–250 GHMX

MF20TDOD 517X 83 ⁄ 8,8½ 2,000–5,000 50–250 GHMWX

MF20TOD 517X 8½ 2,000–5,000 50–250 HMWX

MF20W 517X 8½ 2,000–5,000 50–250 HMX

MF20YSD 517Y 8½,8¾ 2,000–5,000 50–250 GHMGWY

MF25TD 517X 8½ 2,000–5,000 50–250 GHMXMF25TOD 517X 8½ 2,000–5,000 50–250 HMWX

MF26YV 527Y 77 ⁄ 8 2,000–6,000 50–250 HMY

MF26Y 527Y 77 ⁄ 8 2,000–6,000 50–250 HMY

MF26YV 527Y 77 ⁄ 8 2,000–6,000 50–250 HMY

MF27 527Y 8½ 2,000–6,000 50–250 HMY

MF27DOD 527Y 8½ 2,000–6,000 50–250 HMWY

MF27OD 527Y 8½ 2,000–6,000 50–250 HMWY

MF28TDY- 527Y 97 ⁄ 8 2,000–5,000 70–250 GHMWYODPD

MF2G 517X 4¾ 2,000–5,000 50–250 HMX

MF3 537X 41 ⁄ 8,4½,4¾,47 ⁄ 8 2,500–6,000 50–250 HMX

MF30 537X 4¾ 2,500–6,000 50–250 HMX

MF30D 537X 4¾ 2,500–6,000 50–250 HMWX

MF30SD 537X 8½ 2,000–6,000 50–250 GHMWX

MF30T 537X 8½ 2,500–6,000 50–250 HMX

MF30TD 537X 83 ⁄ 8,8½ 2,000–6,000 50–250 GHMX

MF30TDY 547Y 8½ 2,000–6,000 50–280 GHMWY

MF30TDYOD 547Y 8½ 2,000–6,000 50–280 GHMWY

MF30TOD 537X 8½ 2,500–6,000 50–250 HMWX

MF30YOD 537Y 8½ 2,500–6,000 50–250 HMWYMF37 547Y 45 ⁄ 8,4¾,83 ⁄ 8 2,000–5,000 50–250 HMY

MF37D 547Y 4¾ 2,000–5,000 50–250 HMWY

MF37DD 547Y 4¾,83 ⁄ 8 2,000–5,000 50–250 HMWY

MF37DOD 547Y 4¾,8¾ 2,000–5,000 50–250 HMWY

MF3D 537X 4¾ 2,000–6,000 50–250 HMWX

MFS20T 517X 8½ 2,000–5,000 50–250 HMX

MFS20TOD 517X 8½ 2,000–5,000 50–250 HMWX

MFS30 537X 8½ 2,500–6,000 50–250 HMX

MFS30OD 537X 8½ 2,500–6,000 50–250 HMWX

XR20DTDODG 517X 61 ⁄ 8 2,000–5,000 50–300 HMWX

XR20HDTG 517X 6 2,000–5,000 50–300 HMWX

XR20HSDG 517X 6 2,000–5,000 50–300 HMWX

XR20HTD 517X 6 2,000–5,000 50–300 HMWX

XR20HTDG 517X 6,61 ⁄ 8 2,000–5,000 50–300 HMWX

XR20T 517X 57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾ 2,000–5,000 50–300 HMX

XR20TDG 517X 6,6¾ 2,000–5,000 50–300 HMWX

XR20TDOD 517X 6,61 ⁄ 8 2,000–5,000 50–300 HMWX

XR20TOD 517X 6,61 ⁄ 8 2,000–5,000 50–300 HMWX

XR20TY 527Y 6,61 ⁄ 8,6¼ 2,000–5,000 50–300 HMY

XR20TYD 527Y 6 2,000–5,000 50–300 HMWYXR20TYDDPD 527Y 3¾ 2,000–5,000 50–300 HMWY

XR20TYDOD 527Y 6 2,000–5,000 50–300 HMWY

XR20TYOD 527Y 6 2,000–5,000 50–300 HMWY

XR20Y 527Y 3¾ 2,000–5,000 50–300 HMY

XR20YDODG 527Y 3¾ 2,000–5,000 50–300 HMWY

XR25 517X 61 ⁄ 8 2,000–5,000 50–300 HMX

XR25DG 517X 61 ⁄ 8 2,000–5,000 50–300 HMWX

XR25T 517X 6¾ 2,000–5,000 50–300 HMX

XR25W 517X 61 ⁄ 8 2,000–5,000 50–300 HMX

XR30 537X 41 ⁄ 8 2,000–6,000 50–300 HMX

XR30DOD 537X 41 ⁄ 8 2,000–6,000 50–300 HMWX

XR30HTY 537Y 6¼ 2,000–6,000 50–300 HMY

XR30T 537X 55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼,6½ 2,000–6,000 50–300 HMX

XR30TD 537X 57 ⁄ 8,6,61 ⁄ 8,6½ 2,000–6,000 50–300 HMWX

XR30TDOD 537X 57 ⁄ 8,6,61 ⁄ 8 2,000–6,000 50–300 HMWX

XR30TOD 537X 6,61 ⁄ 8 2,000–6,000 50–300 HMWX

XR30TY 547Y 6,61 ⁄ 8,6½ 2,000–6,000 50–300 HMY

XR30TYD 547Y 61 ⁄ 8 2,000–6,000 50–300 HMWY

XR30TYDOD 547Y 6 2,000–6,000 50–300 HMWY

XR30TYOD 547Y 6,6½ 2,000–6,000 50–300 HMWY

XR30Y 537Y 37 ⁄ 8 2,000–6,000 50–300 HMYXR30YD 547Y 37 ⁄ 8,61 ⁄ 8 2,000–6,000 50–300 HMWY





I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e


XR30YDOD 537Y 61 ⁄ 8 2,000–6,000 50–300 HMWY

XR30YOD 547Y 61 ⁄ 8 2,000–6,000 50–300 HMWY

XR32T 537X 6¾ 2,000–6,000 50–300 HMX

XR32TD 537X 6¾ 2,000–6,000 50–300 HMWX

TIXXZ20G 515X 12¼ 1,500–4,500 70–250 GMX

XZ20G 515X 17½ 1,500–4,000 70–150 GX

Z20G 515X 8½ 1,500–4,500 50–100 GX

Z20G 515X 20,22,24,28 1,000–3,000 50–100 GX

X20G 517X 55 ⁄ 8,57 ⁄ 8,6,6¼,75 ⁄ 8,77 ⁄ 8 1,500–4,000 60–120 GX

X20G 517X 8½,8¾,105 ⁄ 8,115 ⁄ 8, 2,000–5,000 60–120 GX12¼

X20G 517X 15½ 1,500–4,500 60–120 GX

M20GP 517X 6 1,000–4,500 60–250 GLMX

M20GP 517X 8½,12¼ 1,000–5,000 60–250 GLMX

K30G 537X 37 ⁄ 8,4 1,000–2,500 50–60 GX

M30GP 537X 8½,12¼ 1,000–5,500 60–250 GLMX

X30G 537X 4¾,5,51 ⁄ 8 1,000–3,500 50–70 GX

X30G 537X 55 ⁄ 8–77 ⁄ 8 2,000–4,500 50–110 GX

X30G 537X 8½–12¼ 2,500–5,500 50–110 GX

X30G 537X 14¾,15½,17½ 2,000–4,500 50–110 GX

XZ30G 535X 12¼ 2,000–5,000 50–250 GMX

XZ30G 535X 17½ 2,000–4,500 60–150 GX

Z30G 535X 8½ 2,000–5,000 45–100 GX

Z30G 535X 20,22,24 1,500–3,500 45–100 GX

MZ20GP 515X 16,17½ 1,500–4,000 60–250 GLMXTri-Max

TM515 515 6–17½ 2,000–4,000 80–150

TM517 517 6–17½ 2,000–5,000 65–120

TM527 527 6–17½ 2,000–5,000 65–120

TM537 537 6–17½ 2,000–5,000 65–120

TM545 545 6–17½ 2,000–4,000 80–150

TM547 547 6–17½ 2,500–5,000 65–120

Varel

ETR24 515X 17½,24 2,500–4,500 80–250 MW

ETD24 517X 37 ⁄ 8,4,41 ⁄ 8,4¼,4½, 2,500–5,000 70–140 W4¾,47 ⁄ 8,55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾,12

CH24 517X 37 ⁄ 8,4¾,57 ⁄ 8,6,61 ⁄ 8, 2,000–5,000 60–220 MW6¼,77 ⁄ 8,83 ⁄ 8,8½,8¾,115 ⁄ 8,12¼

CH25MS 527Y 8½,12¼ 2,000–5,000 60–220 MW

ETD25 527Y 11 2,000–5,500 70–140 GW

CH26MS 527X 77 ⁄ 8 2,000–5,500 60–220 MW

CH27 527Y 77 ⁄ 8 2,000–5,000 60–220 MW

CH28 527X 77

⁄ 8,8¾ 2,000–5,000 60–220 MWCH29 527Y 77 ⁄ 8 2,000–5,000 60–220 MW

CH29H 527Y 77 ⁄ 8,8¾ 2,000–5,000 60–220 MW

ETD29 527Y 11,12¼ 3,000–5,500 60–120 W

CH34 537X 4¾,47 ⁄ 8,55 ⁄ 8,57 ⁄ 8,6, 2,000–6,000 50–180 MW61 ⁄ 8,6¼,77 ⁄ 8,83 ⁄ 8,8½,8¾,12¼

ETD34 537X 41 ⁄ 8,4¾,47 ⁄ 8,55 ⁄ 8,5¾, 3,000–6,500 50–100 W57 ⁄ 8,6,61 ⁄ 8,6¼,6½,8½,97 ⁄ 8

ETR34 535X 17½ 3,000–5,000 60–200 W

CH31 537Y 77 ⁄ 8,8¾,11,12¼ 2,500–6,000 50–180

CH35 547Y 4¾,8½ 2,500–6,000 50–180 MW

CH35A 547A 77 ⁄ 8 2,500–6,000 50–180 AW

ETD35 547Y 4¾,6¼,6½ 3,000–7,000 50–90 W

CH37 547Y 77 ⁄ 8,11 2,500–6,000 50–180 MW

ETR38 547X 17½ 3,500–6,000 60–160 W

CH38MRS 547X 8½ 2,500–6,000 50–180 MW

CH39S 547Y 77 ⁄ 8,8¾ 2,500–6,000 50–180 MW

Drill out

Hughes Christensen

RWD 2 M233 97 ⁄ 8x83 ⁄ 8,12¼x105 ⁄ 8, 200–3,000 50–200 DGMVW13¾x12¼,14¾x12¼,17x14½,20x17

RWD 2S M233 3x2¾,41 ⁄ 8x3¾, 200–3,000 50–200 DGHMVW6½x5¾,6.7x5.95,7x6,7¼x6,7½x6.3,8x65 ⁄ 8,97 ⁄ 8x83 ⁄ 8,12¼x105 ⁄ 8,13¾x12¼,14¾x12¼,17x14½,20x17

RWD 2ST M233 3x2¾,41 ⁄ 8x3¾, 200–3,000 50–200 DGHMVW6½x5¾,6.7x5.95,7x6,7¼x6

Fish tail bits

Bit-Tech

DP-440-BG M131 6¼ 300–2,000 100–500 ADGMVW


FM2443/ M431 61 ⁄ 8,6¾ 500–2,000 60–400 MVW

FM3443FM2445/ M121 6¼ 500–2,000 60–400 MVWFM3445

FM2445/ M331 8½ 500–2,000 60–400 MVWFM3445

FM2445/ M131 97 ⁄ 8,12¼ 500–2,000 60–400 MVWFM3445

FM2461/ M221 97 ⁄ 8 500–2,000 60–400 MVWFM3461FM2463/ M421 61 ⁄ 8 500–2,000 60–400 MVWFM3463

PDC drill bits

Bit-Tech

HP-440-B M342 3½,35 ⁄ 8,3¾,37 ⁄ 8,4,41 ⁄ 8, 200–3,000 200–1,000 ADFGHM-4¼,43 ⁄ 8,4½,45 ⁄ 8,4¾, NVW57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾

HP-440-B13 M232 6,61 ⁄ 8,6¼,6½,6¾ 200–3,000 60–600 ADGHMVW

DP-440-B2U M232 77 ⁄ 8,8½,8¾ 400–3,000 60–600 ADGMVW

DP-B45 M242 77 ⁄ 8,8¾ 400–3,000 60–600 ADGMVW

DP-B66 M242 77 ⁄ 8,8¾ 400–3,000 60–600 ADGMVW

Dowdco

TM-353 M132 4¾,61 ⁄ 8,6½,6¾ 2,000–5,500 50–200 DGHMV

TM-266 M-223 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 2,000–5,000 50–200 DGHMV

TM-277 M-223 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 2,000–5,000 50–200 DGHMV

GeoDiamond

M77 M121 8½,97 ⁄ 8,12¼ 500–2,000 60–400 GMNUlVW

M79 M121 41 ⁄ 8,4¾,5¾,57 ⁄ 8,6,61 ⁄ 8, 400–2,000 60–600 GMNUlVW6¼,6¾,77 ⁄ 8

M80 M123 61 ⁄ 8,6½,6¾,63 ⁄ 8,77 ⁄ 8, 400–2,000 60–600 GMNUlVW8½,97 ⁄ 8

M81 M121 61 ⁄ 8,6¼,6¾,8½,97 ⁄ 8 400–2,000 60–600 GMNUlVW

M90 M123 57 ⁄ 8,8½,12¼ 400–2,000 60–600 GMNUlVW

QDS75 S223 83 ⁄ 8x9,8½x97 ⁄ 8, 200–3,000 60–600 GMNUlVW97 ⁄ 8x11¾,105 ⁄ 8x12¼,12¼x14¾,13½x16,14½x16,14½x17½

QDS76 S223 9¼x10¾ 200–3,000 60–600 GMNUlVW

QDS81 S223 6x7 200–3,000 60–600 GMNUlVW

M72 M322 77 ⁄ 8,8¾,12¼ 500–2,500 60–400 GMNUmVW

MA74 M223 4¾,5¾,57 ⁄ 8,6,61 ⁄ 8, 400–2,000 60–600 GMNUlVW6¼,6½,65 ⁄ 8,6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,9½,97 ⁄ 8,105 ⁄ 8,12¼,13¾,14¾,17½

MRS74 M223 6,8½,8¾,9½,97 ⁄ 8, 400–2,000 60–600 DGMNUlVW105 ⁄ 8,12¼,14½,14¾

MRS741 M223 8½,12¼ 400–2,000 60–600 DGMNUlVW

M75 M223 6¼,77 ⁄ 8,83 ⁄ 8,8½,8¾, 500–3,000 60–600 GMNUlVW97 ⁄ 8,12,12¼,14¾

MDT82 M223 12¼, 500–3,000 60–600 DGMNUlVWMRS82 M223 8½,9½,97 ⁄ 8,12¼, 500–3,000 60–600 DGMNUlVW

13½,14¾

MRS91 M223 8½,12¼ 500–3,000 60–600 DGMNUlVW

M86 M223 8½,8¾ 400–2,000 60–600 GMNUlVW

M87 M223 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 400–2,000 60–600 GMNUlVW

MRS87 M223 8½,97 ⁄ 8 400–2,000 60–600 GMNUlVW

SRS87 S223 8½,95 ⁄ 8,97 ⁄ 8,12¼ 400–2,000 60–600 GMNUlVW

M88 M223 77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8, 400–2,000 60–600 GMNUlVW12,12¼,16

M90 M223 8½,97 ⁄ 8,12¼ 500–2,000 60–400 GMNUlVW

S75 S222 6,61 ⁄ 8,6¼,6½,65 ⁄ 8, 500–2,000 60–400 GMNUlVW6¾,77 ⁄ 8,8½,12¼,14½,14¾

S80 S223 4¾,6,61 ⁄ 8,6¼,6½, 400–2,000 60–400 GMNUlVW6¾,77 ⁄ 8,8½,97 ⁄ 8,12¼

S81 S223 41 ⁄ 8,4¾,5,61 ⁄ 8,6¼, 500–2,000 60–400 GMNUlVW6½,6¾

S83 S223 18½,22,26 500–2,000 60–400 GMNUlVW

S84 S223 12¼ 500–2,000 60–400 GMNUlVW

PS81 S223 77 ⁄ 8 500–2,000 60–400 GMNUlVW

S86 S223 8½,97 ⁄ 8,12¼ 500–2,000 60–400 GMNUlVW

S88 S223 83 ⁄ 8,8½,8¾,97 ⁄ 8, 500–2,000 60–400 GMNUlVW12,12¼,17½

S89 S223 97 ⁄ 8, 500–2,000 60–400 GMNUlVW

QDG76 S223 8½x97 ⁄ 8,105 ⁄ 8x12¼, 200–3,000 60–600 GMNUlVW12¼x14¾,14½x17¼,16x20

QDR75 S223 12¼x13¼,12¼x13½ 200–3,000 60–600 GMNUlVW

QDR89 S123 16½x19 200–3,000 60–600 GMNUlVW

SHO91 S123 61 ⁄ 8x8`/2,8½x12¼, GWOUIV97 ⁄ 8x12¼,12¼x17½


FM2443/ M333 6,6½ 500–2,500 60–400 MVWFM3443

FM2445/ M334 6 500–2,000 60–400 MVWFM3445

FM2461/ M222 12¼ 500–2,000 60–400 MVWFM3461

FM2545/ M433 77 ⁄ 8 500–2,500 60–400 MVWFM3545

FM2545/ M333 8¾,97

⁄ 8 500–2,500 60–400 MVWFM3545

FM2546/ M433 8½ 500–2,500 60–400 MVWFM3546

FM2631/ M442 6 500–2,000 60–400 MVWFM3631

FM2633/ M443 61 ⁄ 8,6¼,6½,6¾ 500–2,000 60–400 MVWFM3633FM2641/ M232 6,61 ⁄ 8 500–2,500 60–400 MVWFM3641

FM2641/ M432 6¾ 500–2,500 60–400 MVWFM3641

FM2641/ M332 6½ 500–2,500 60–400 MVWFM3641

FM2645/ M333 77 ⁄ 8,8¾ 500–2,500 60–400 MVWFM3645

FM2653/ M423 77 ⁄ 8 500–2,500 60–400 MVWFM3653

FM2655/ M424 8¾ 500–2,500 60–400 MVWFM3655

FM2665/ M423 77 ⁄ 8,8½,8¾ 500–2,500 60–400 MVWFM3665

FM2665/ M323 97 ⁄ 8 500–2,500 60–400 MVWFM3665

FM2743/ M333 12¼ 500–2,500 60–400 MVWFM3743

FM2745/ M433 77 ⁄ 8,83 ⁄ 8,8½,8¾,9½, 500–2,500 60–400 MVWFM3745 97 ⁄ 8,10½,105 ⁄ 8

FM2753/ M323 12¼ 500–2,500 60–400 MVWFM3753

FM2765/ M324 12¼ 500–2,500 60–400 MVWFM3765

FM2765/ M424 97 ⁄ 8 500–2,500 60–400 MVWFM3765

FM2841/ M433 83 ⁄ 8,8½ 500–2,500 60–400 MVWFM3841

FM2846/ M433 8½,8¾ 500–2,500 60–400 MVWFM3846

FM2865/ M423 12¼ 500–2,500 60–400 MVWFM3865

FM2943/ M333 97 ⁄ 8,12,12¼,14¾ 500–2,500 60–400 MVWFM3943

FS2743 S243 12¼ 500–2,000 60–400 MVW

FS2863 S223 16,17½ 500–2,000 60–400 MVW

FS2963 S223 16 500–2,000 60–400 MVW

HZ23-1 M342 3½,37 ⁄ 8,41 ⁄ 8,4½,4¾ 500–2,500 80–450 HM

HZ23-2 M232 5¾,6,61 ⁄ 8,6½,6¾,8½ 500–2,500 80–450 HM

HZ35+2 M432 57 ⁄ 8,6,61 ⁄ 8,8½,12¼ 1,200–2,700 80–450 HMW

SE3631 M433 5½–6¾ 200–2,000 60–400 DVWSE3641 M432 57 ⁄ 8–8½ 200–2,000 60–400 DVW

SE3641A S433 8½ 500–2,000 60–400 DVW

SE3643 M432 57 ⁄ 8–8½ 200–2,000 60–400 DVW

SE3662 M433 12¼ 500–2,000 60–400 DVW

SE3663 M433 12¼ 500–2,000 60–400 DVW

SE3663A S323 12¼ 500–2,000 60–400 DVW

Hughes Christensen

HC603 M223 61 ⁄ 8,8½,12¼ 235–2,500 60–350 DGMVW

HC604 M223 6–17½ 235–2,500 60–350 DGMVW

HCM604 M223 6–17½ 235–2,500 60–350 DGMVW

HCR604 M223 6–17½ 235–2,500 60–350 DGVW

HC403 M233 61 ⁄ 8,6¼ 235–2,500 60–350 DGMVW

HC404 M233 37 ⁄ 8–17½ 235–2,500 60–350 DGMVW

HCM404 M233 37 ⁄ 8–17½ 235–2,500 60–350 DGMVW

HCR404 M233 37 ⁄ 8–17½ 235–2,500 60–350 DGVW

HC505 M323 77 ⁄ 8,8¾ 235–2,500 60–350 DGMVW

HC605 M323 6¼–17½ 235–2,500 60–350 DGMVW

HCM505 M323 77 ⁄ 8,8¾ 235–2,500 60–350 DGMVW

HCM605 M323 6¼–17½ 235–2,500 60–350 DGMVW

HCR505 M323 77 ⁄ 8,8¾ 235–2,500 60–350 DGVW

HCR605 M323 6¼–17½ 235–2,500 60–350 DGVW

HC405 M333 41 ⁄ 8–77 ⁄ 8 235–2,500 60–350 DGMVW

HCM405 M333 41 ⁄ 8–77 ⁄ 8 235–2,500 60–350 DGMVW

HCR405 M333 41 ⁄ 8–77 ⁄ 8 235–2,500 60–350 DGVW

HC305 M343 41 ⁄ 8,4½ 235–2,500 60–350 DGMVW

NQL (formerly DPI)

SRF+244M S133 13¾x16½, 4,000–4,500 60–200 DGHKMVWBi-center 14½x17¼

CSD344 S233 7½x8½,8½x97 ⁄ 8 3,000–3,500 60–200 DGHKMVBi-center

CSD444 S233 75 ⁄ 8x83 ⁄ 8,97 ⁄ 8x105 ⁄ 8 3,000–3,500 60–200 DGHKMVBi-center

PDC-Gearhart

MS1955 M223 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 300–2,000 60–250 GHWUlM

MS1966 M223 77 ⁄ 8,8½,8¾,97 ⁄ 8,105 ⁄ 8, 300–2,000 60–250 GHWUmM11,12¼

MS1655 M223 77 ⁄ 8 300–2,000 60–250 GHWUmM

MS1666 M223 77 ⁄ 8,8¾,97 ⁄ 8 300–2,000 60–250 GHWUmM

MR1955 M223 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 300–2,000 60–250 GHWUmM

Precise

S457L S122 37 ⁄ 8,4¾,6,61 ⁄ 8,6¼, 500–4,500 40–1,000 V6½,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½





I A D C c o d e



l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e


M244M M223 37 ⁄ 8,4¾,6,61 ⁄ 8,6¼, 500–4,500 40–1,000 V6½,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

S155M S232 37 ⁄ 8,4¾,6,61 ⁄ 8,6¼ 500–4,500 40–1,000 V

S457M S223 37 ⁄ 8,4¾,6,61 ⁄ 8,6¼, 500–4,500 40–1,000 V6½,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½

M466M M223 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40–1,000 V8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½


DS145H M222 8½ 350–3,000 Variable GHMWUm

DS189 M222 6¼–67 ⁄ 8 350–3,000 Variable GHMWUm

DS147 M223 77 ⁄ 8–12¼ 350–3,000 Variable GHMWUmV

DS166 M223 77 ⁄ 8 350–3,000 Variable GHMWUm



DS128 M233 6–6¼ 350–3,000 Variable GHMUm


DS49D M233 77 ⁄ 8–8¾ 350–3,000 Variable GHMWUm

DS49H M233 3¾–12¼ 350–3,000 Variable GHMWUm

DS116 M321 8½ 350–3,000 Variable GHMUm

DS97H M321 83 ⁄ 8–12¼ 350–3,000 Variable GHMWUm

RS161 M322 8½ 350–3,000 Variable GHWUmRotary

SteerableDS134H M323 77 ⁄ 8–12¼ 350–3,000 Variable GHMWUm

DS195D M323 12¼ 350–3,000 Variable GHMWUm


DS199 M323 77 ⁄ 8,8¾ 350–3,000 Variable GHMWUm

DS203 M323 8½ 350–3,000 Variable GHMWUm

DS205 M323 8¾ 350–3,000 Variable GHMWUm

DS95 M323 6½ 350–3,000 Variable GHMWUm

DS119H M332 97 ⁄ 8 350–3,000 Variable GHMWUm

DS56H M332 511 ⁄ 16–12¼ 350–3,000 Variable GHMWUm

DS59H M332 61 ⁄ 8–14¾ 350–3,000 Variable GHMWUl


DS230 M333 8½,12¼ 350–3,001 Variable GHMWUm

DS34H S223 12¼–17½ 350–3,000 Variable GHMWUm

DS76 S223 12¼ 350–3,000 Variable GHMWUm


DS106H S233 77 ⁄ 8–14¾ 350–3,000 Variable GHMWUmV

DS46H S233 5½–12¼ 350–3,000 Variable GHMWUm

RS191 S322 9½,97 ⁄ 8 350–3,000 Variable GHWUmRotary

Steerable

RS192 S322 8½,12¼ 300–3,000 Variable GHWUmRotary

Steerable


DS188 S323 8½ 350–3,000 Variable GHMWUm

DS69H S323 6–16 350–3,000 Variable GHMUl


DS86 S323 77 ⁄ 8–8½ 350–3,000 Variable GHMWUmV

DS123D S332 12¼ 350–3,000 Variable GHMWUmV

DS74 S332 2¾–4¾ 350–3,000 Variable GHMWUm

RS223 S332 6,61 ⁄ 8,97 ⁄ 8 350–3,000 Variable GHWUmRotary

Steerable

DS101H S333 105 ⁄ 8x12¼–14½x17½ 350–3,000 Variable GHMUm

DS106D S333 8½–14¾ 350–3,000 Variable GHMWUmV

Rock Bit

KDM33 S232 4¾,6¼,77 ⁄ 8,8½,8¾, 500–3,000 80–1,000 M12¼

KD3619 S233 6,61 ⁄ 8,6¼,77 ⁄ 8,8½, 500–3,000 60–400 GHMVW8¾,97 ⁄ 8,12¼

KD4719 S333 77

⁄ 8

,8½,8¾,97

⁄ 8

,12¼ 500–3,000 60–400 GHMVWKDS22 S222 2¾,37 ⁄ 8,4¾,6¼,77 ⁄ 8, 500–3,000 80–500 M8½,8¾

KD4413 S233 4¾,6,61 ⁄ 8,6¼,77 ⁄ 8, 500–3,000 60–400 GHMVW8½,8¾

334HF S123 6,61 ⁄ 8,6¼, 500–3,000 70–350 GUl

435HF S123 77 ⁄ 8,8½,8¾ 500–3,000 70–350 GUmM

KD4519HF S123 77 ⁄ 8,8½,8¾ 500–3,000 70–250 GUmM

KD5613HF S223 77 ⁄ 8 500–3,000 70–250 GUmM

KD4619HF S223 8½,8¾ 500–3,000 70–250 GUmM

Tri-Max

S-1H S316 77 ⁄ 8–17½ 1,000–4,000 85–250 DGM

Q-1L S544 6–17½ 1,000–3,000 85–250 DG

Q-1 S545 57 ⁄ 8–17½ 1,000–4,000 85–250 DGM

S645 S645 6–17½ 1,000–4,000 85–300 GM

HZ-90 S974 4½–12¼ 500–3,000 100–400 GHM


United Diamond

UD513 S615 3¾,37 ⁄ 8,41 ⁄ 8,4¼,4½, 500–4,500 30–600 MGVUm45 ⁄ 8,4¾,5¾,55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,9½,

97 ⁄ 8,105 ⁄ 8,12¼,13¾UD516 S615 61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8, 500–4,500 30–600 MGVUm

8½,8¾,12,12¼,14¾

UD519 S612 61 ⁄ 8,6¼,6½,77 ⁄ 8,8½, 500–4,500 30–600 MGVUm8¾,9½,97 ⁄ 8,12¼,16,17½

UD516RR S915 6¼,77 ⁄ 8,8½,8¾,12¼ 500–4,500 30–600 MGVUm

UD525, S612 8½,97 ⁄ 8,12¼ 500–2,900 30–600 MGVUmUD425

Varel

MKS54 M132 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–2,000 60–400 GMW8½,8¾

MKS55 M232 77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8, 500–2,000 60–400 GMW105 ⁄ 8,12¼,13¾

MKS56 M332 6,61 ⁄ 8,6¼,6½,6½, 400–2,000 60–500 GIMUm6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,12¼,13¾

MKS56 M332 6,61 ⁄ 8,6¼,6½,6½, 500–2,000 60–400 GMW6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,12¼,13¾

MKS65 M323 77 ⁄ 8,8¾ 500–2,000 60–400 GMW

MKS67 M323 115 ⁄ 8 500–2,000 60–400 GMW

MKS74 M123 6,61 ⁄ 8,6¾,77 ⁄ 8,8½, 500–2,000 60–400 GMW83 ⁄ 8,8¾,97 ⁄ 8,105 ⁄ 8,12¼,13¾

MKS75 M222 6,77 ⁄ 8,83 ⁄ 8,8½,8¾, 500 –2,000 60–400 GMW97 ⁄ 8,97 ⁄ 8,11,12¼,13¾,14¾

MKS76 M323 77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8, 500–2,000 60–400 GMW105 ⁄ 8,12¼,13¾,17½

SKM75 M323 17½ 500–2,000 60–400 GMW

SKS65 S323 17½ 500–2,000 60–400 GMW

SKS67 S323 12¼ 500–2,000 60–400 GMW

SKS75 S323 8½,12¼,17½ 500–2,000 60–400 GMW

VB542M M323 12¼ 250–2,500 60–600 GMWKQUm

VB440S S223 12¼,14¾ 200–1,700 60–600 GMWKQUl

VB440S S323 12¼,16,17½ 200–1,700 60–600 GMWKQUl

VB452M M223 57 ⁄ 8,6,61 ⁄ 8,6¼ 300–2,000 60–600 GMWFKQUm

VB472M M233 57 ⁄ 8,6,61 ⁄ 8,6¼ 300–2,000 60–600 GHMWKNQUh

VB552S S223 77 ⁄ 8,83 ⁄ 8,8½,8¾ 250–3,000 60–600 GMWKQUl

VB552M M223 77 ⁄ 8,83 ⁄ 8,8½,8¾ 250–3,000 60–600 GMWKQUl

VB420S S333 83

⁄ 8

,8½,8¾,97

⁄ 8

,12¼ 200–2,000 60–600 GMWKQUm VB522M M213 83 ⁄ 8,8½,8¾ 250–3,000 60–600 GMWKQUm

VB522S S213 83 ⁄ 8,8½,8¾ 250–3,000 60–600 GMWKQUl

VB452M M223 83 ⁄ 8,8½,8¾ 250–2,500 60–600 DGHMW–KNQUh

MBC36 M233 41 ⁄ 8x47 ⁄ 8 200–1,700 60–400 GMWBi-center

MBC37 M233 3¾x41 ⁄ 8 200–1,700 60–400 GMWBi-center

MBC39 M233 6x7,6½x7½ 200–1,700 60–400 GMWBi-center




12¼x14¾


12¼x13½

MBC77 M323 6¾x7½,83

⁄ 8x8¾, 200–1,700 60–400 GMWBi-center 12¼x13½

MBC78 M323 105 ⁄ 8x12¼,14½x17½ 200–1,700 60–400 GMWBi-center


Hughes Christensen

ECZ304 S233 6,61 ⁄ 8,6½,6¾,8½,97 ⁄ 8, 235–2,500 60–350 W12¼,17½,20,24

ECZ306 S333 6,61 ⁄ 8,6½,6¾,8½, 235–2,500 60–350 W97 ⁄ 8,12¼,17½,20,24

ECZ404 S233 6¾,8½,97 ⁄ 8,12¼, 235–2,500 60–350 W17½,20,24

ECZ406 S343 6¾,8½,97 ⁄ 8,12¼, 235–2,500 60–350 W17½,20,24

PDC coring bits

Baker Hughes INTEQ

ARC412 M354 4¾–12¼ 400–2,000 50–500 Low Inv VGMF

ARC413 M354 4¾–12¼ 400–2,500 50–500 Low Inv VGMF

ARC415 M354 4¾–12¼

ARC425 M354 4¾–12¼ 400–2,500 50–500 Low Inv. F VGMF

RC412 M354 4¾–12¼ 400–2,000 50–500 Low Inv F

RC414 M355 4¾–12¼ 400–2,000 80–500 Short MF

RC476 M565 4¾–12¼ 400–2,300 60–500 Round

Bit-Tech

CP-440-BU M342 6,61 ⁄ 8 300–2,000 50–500 AFGMVW

CP-440-BU M232 77 ⁄ 8,8½,8¾ 300–2,000 50–500 AFGMVW

CP-440 M342 7

7

⁄ 8

,8½,8¾ 300–2,000 60–120 AFGCP-B66 M232 61 ⁄ 8 300–2,000 50–500 AFGMVW


CD 93 M233 6–12¼ 250–3,500 80–140 F

FC3643 M343 8½–12¼ 250–3,500 50–150 F

NQL (formerly DPI)

CMM26 M332 6¼,6¼,6¼x,727 ⁄ 32 500–1,600 50–300 G

CMM26F M712 823 ⁄ 32 500–2,500 50–300 G

CMM27F M332 6½x33 ⁄ 8 500–2,500 50–300 G

CMM34F M423 6¼ 61 ⁄ 8,6,57 ⁄ 8,727 ⁄ 32, 500–2,500 50–300 G727 ⁄ 32,83 ⁄ 8,8¾

CMM34F M223 57 ⁄ 8,61 ⁄ 8 500–1,800 50–300 G

CMM45M M233 6½x3½ 500–2,500 50–300 G

CMM46 M712 97 ⁄ 8 500–2,500 50–300 G

CMM46 M333 97 ⁄ 8 500–2,800 50–300 G

CMR26 M712 727 ⁄ 32 500–2,500 50–300 G

CMR27 M712 6¼,6¾,623 ⁄ 32,6½, 500–1,600 50–300 G627 ⁄ 32

CMR28 M712 63 ⁄ 32 500–2,500 50–300 G

CMR34 M712 727 ⁄ 32 500–2,500 50–300 G

CMR34 M712 823 ⁄ 32 500–2,500 50–300 G

CMR35 M812 6¼,6½ 200–2,500 50–300 GCMR35 M243 6¼ 500–1,500 50–300 G

CMR36 M812 6¼ 500–2,500 50–300 G

CMR45 M712 727 ⁄ 32 500–2,500 50–300 G

CMR46 M812 6¼,727 ⁄ 32 500–2,500 50–300 G

CMR47 M712 6½ 500–2,500 50–300 G

CNM44 M813 815 ⁄ 32 500–2,500 50–300 G

CNM66 M812 6½,727 ⁄ 32,77 ⁄ 8,8½, 500–1,800 50–300 G823 ⁄ 32

CNT67 M812 6/2/06 500–2,500 50–300 G

CTR77 M812 8½,8½ 500–2,500 50–300 G

RockBit

KDC77 S133 4¾–12¼ 400–3,350 40–150 Ul

KDC88 S133 4¾–12¼ 400–3,350 40–150 Um

Varel

C100 M232 57 ⁄ 8–12¼ 100–2,000 60–120 GUI

C60 M232 57 ⁄ 8–12¼ 100–2,000 60–120 GUI

CK56 M132 8½x4,12¼x5¼ 100–2,000 60–120 GUI

PDC cutters

Baker Hughes Inteq

Surface set diamond bits

Bit-Tech

DN-422 M712 1¾,17 ⁄ 8,21 ⁄ 8,2¼,27 ⁄ 16, 300–3,500 60–600 ADGHMNR35 ⁄ 8,4½,4¾,6,61 ⁄ 8,6¼,6½,6¾

DG-420F M622 1¾,17 ⁄ 8,21 ⁄ 8,2¼,27 ⁄ 16, 300–3,500 60–600 ADGHIMR35 ⁄ 8,4½,4¾,6,61 ⁄ 8,6¼,6½,6¾

DN-302 M713 4½–4¾,5½–6½ 300–3,500 Variable Custom

DN-332 M713 4½–4¾,5½–6¾ 300–3,500 Variable Custom


Baker Hughes INTEQ

C18 D5X5 4¾–12¼ 500–3,000 50–500 Dbl Cone FK

SC712 T524 4¾–12¼ 400–2,000 60–500 Low Inv GMF

Bit-Tech

CG-300 M623 6,61 ⁄ 8,6¼,77 ⁄ 8,8¾, 400–2,500 50–500 AGIKM

CN-402 M712 6,61 ⁄ 8,6¼,77 ⁄ 8,8¾ 400–2,500 50–500 AGKM

CN-332 M713 61 ⁄ 8,63 ⁄ 16,6¼,77 ⁄ 8,8¾ 400–2,500 60–120 AGMR


CB17 M613 6–12¼ 250–3,500 80–140 F

NQL (formerly DPI)

CNM35S M812 6¼ 627 ⁄ 32,6¼,6¾,6¾ 500–2,500 50–300 G

CNM55 M812 63 ⁄ 32,6¾ 500–2,500 50–300 G

CNR55 M712 6¾x25 ⁄ 8 500–2,500 50–300 G

CNR55 M713 6¾ 600–1,900 50–300 G

CNR66 M812 727 ⁄ 32,8¾ 500–2,500 50–300 G

CNR67 M812 61 ⁄ 8,61 ⁄ 8,77 ⁄ 8 500–2,500 50–300 G

CNR67 M712 5½ 500–1,500 50–300 G

CNR77 M712 6½,6¾,727 ⁄ 32,823 ⁄ 32 500–2,500 50–300 G

CNR77 M812 5½,6½,727 ⁄ 32,77 ⁄ 8, 500–2,500 50–300 G8½,815 ⁄ 32,8¾,823 ⁄ 32

MediumSteel tooth roller cone bits

Hughes Christensen

R7 321 61 ⁄ 8,8½,12¼ 2,000–5,000 60–250 S

ATJ-4 216 4¾,57 ⁄ 8,6,61 ⁄ 8 2,000–5,000 80–180 SW

ATJ-G4 217 77 ⁄ 8,8¾ 2,000–5,000 80–180 SW

DR5 221 3¾,37 ⁄ 8,41 ⁄ 8,45 ⁄ 8,4¾ 1,000–4,000 60–250 S

TIXMS 211 55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–4,000 60–1207½,75 ⁄ 8,77 ⁄ 8





I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e


MS 211 83 ⁄ 8,8½,85 ⁄ 8,8¾,9, 2,000–5,000 60–1209½,95 ⁄ 8,97 ⁄ 8,105 ⁄ 8,11,115 ⁄ 8,12,12¼

MS 211 133 ⁄ 8,13¾,14¾,15, 2,000–4,000 60–12015½,17½,20,22,23,

24,26MS-X 216 55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–4,000 50–110 B

75 ⁄ 8,77 ⁄ 8

MS-X 216 83 ⁄ 8,8½,85 ⁄ 8,8¾,9½, 2,000–5,000 50–110 B95 ⁄ 8,97 ⁄ 8,115 ⁄ 8,12,12¼

MS-X 216 17½ 2,000–4,000 50–100 B

MS-TX 217 57 ⁄ 8,6,6¼,77 ⁄ 8 2,000–4,000 50–110 BG

MS-TX 217 8½,97 ⁄ 8,115 ⁄ 8,12¼ 2,000–5,000 50–110 BG

MS-TZ 215 83 ⁄ 8,8½,9½,95 ⁄ 8,115 ⁄ 8, 2,500–5,000 60–100 G12¼

MS-Z 214 83 ⁄ 8,8½,8¾,9½,95 ⁄ 8, 2,000–5,000 60–10097 ⁄ 8,105 ⁄ 8,115 ⁄ 8,12,12¼

MS-Z 214 15,17½ 2,000–4,000 50–100

MS-XZ 214 12¼ 2,000–5,000 60–250 M

MS-XZ 214 17½ 2,000–4,000 60–150

MS-TMZ 215 16,17½ 2,000–4,000 60–250 GM

Tri-Max

TM211 211 6–17½ 2,000–4,000 60–120

TM214 214 6–12¼ 2,000–4,000 60–120

TM215 215 6–12¼ 2,000–4,000 60–150TM216 216 6–12¼ 2,000–4,000 60–150

TM217 217 4½–12¼ 2,000–4,000 60–120



EBXS(D)40- 617 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–7,000 40–220 BWAEB XS(D)45 6½,6¾,77 ⁄ 8,83 ⁄ 8,8½,

8¾,97 ⁄ 8,105 ⁄ 8,12¼

EBXS(D)46- 627 61 ⁄ 8,77 ⁄ 8,8½,8¾ 3,500–7,000 40–150EBXS(D)51

EBXS(D)52- 637 8½,105 ⁄ 8,12¼ 4,000–7,000 40–140EBXS(D)58

EBXS(D)61, 647 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 4,000–7,000 40–140 BW63,65,67,69 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

EBXT(D)40- 615 13½,14¾,16,17½, 3,000–7,000 40–220 BWEBXT(D)45 20,22,24,26,28

EBXT(D)46- 625 13½,14¾,16,17, 3,500–7,000 40–150 BWEBXT(D)51 17½,20,22,24,26,28

XS(D)40- 617 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–7,000 40–220 BWAXS(D)45 6½,6¾,77 ⁄ 8,83 ⁄ 8,8½,

8¾,97 ⁄ 8,105 ⁄ 8,12¼XS(D)46- 627 61 ⁄ 8,77 ⁄ 8,8½,8¾ 3,500–7,000 40–150XS(D)51

XS(D)52- 637 57 ⁄ 8,61 ⁄ 8,97 ⁄ 8 4,000–7,000 40–140XS(D)58

XS(D)61,63, 647 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 4,000–7,000 40–140 BW65,67,69 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

XT(D)40- 615 13½,14¾,16,17½, 3,000–7,000 40–220 BWXT(D)45 20,22,24,26,28

XT(D)46- 625 13½,14¾,16,17, 3,500–7,000 40–150 BWXT(D)51 17½,20,22,24,26,28

Hughes Christensen

MX-40G 617 83 ⁄ 8,12 1,000–6,000 50–220 BGMW

MX-40 627 77 ⁄ 8 1,000–6,000 50–220 BGMW

MX-40CG 627 83 ⁄ 8,8½,105 ⁄ 8 1,000–6,000 50–220 BGMW

MX-44 627 12¼ 1,000–6,000 50–220 BGMW

MX-44C 627 12¼,17½ 1,000–6,000 50–220 BGMW

MX-44CG 627 12¼,14¾ 1,000–6,000 50–220 BGMW

MX-44CH 627 8¾ 1,000–6,000 50–220 BGMW

MX-44G 627 8½ 1,000–6,000 50–220 BGMW

HR-38C 547 77 ⁄ 8,8½,8¾,97 ⁄ 8 1,000–6,000 50–220 GW

STX-44C 627 37 ⁄ 8,4¾,61 ⁄ 8,6¼ 1,000–6,000 50–220 GW

HR-40C 627 8¾ 1,000–6,000 50–220 GW

HR-44 617 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 1,000–6,000 50–220 GW

HR-44C 617 77 ⁄ 8,8½,8¾,97 ⁄ 8,11, 1,000–6,000 50–220 GW12¼

HR-44CH 617 77 ⁄ 8,8¾ 1,000–6,000 50–220 GW

HR-44G 617 8½,8¾,115 ⁄ 8 1,000–6,000 50–220 GW

HR-44H 617 77 ⁄ 8 1,000–6,000 50–220 GW

STX-40 617 5½,6,61 ⁄ 8,6½ 2,000–5,000 80–250 GW

STX-40C 625 3¾,6,61 ⁄ 8 2,000–5,000 80–250 GW

STR-40 617 6 2,000–5,000 80–250 GW

STR-40C 627 4½,4¾,57 ⁄ 8,61 ⁄ 8,6½, 2,000–5,000 80–250 GW6¾

STR-40DF 617 6½ 2,000–5,000 80–250 GW

STR-40CG 627 4¾,6½ 2,000–5,000 80–250 GW

STR-40FD 617 6½ 2,000–5,000 80–250 GW

STR-44C 625 4½,61 ⁄ 8 2,000–6,000 80–250 GW

STX-44C 625 37 ⁄ 8,4¾,57 ⁄ 8,6¼,6½ 2,000–6,000 80–250 GW

GTX-40C 615 17½ 1,000–6,000 50–220 GW

XL40A 617 61

⁄ 8,6¼,6½,77

⁄ 8,8¾, 1,000–5,500 50–150 AC11,12¼

RBI-Gearhart

C4 617X 3¾,4¾,57 ⁄ 8,6,61 ⁄ 8, 2,500–5,500 40–120 ACEGHLM6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C4LRGSP 617X 3¾,4¾,57 ⁄ 8,6,61 ⁄ 8, 2,500–5,500 40–120 ACEGHM6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 812¼

C4VLRGSP 617X 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,500–5,500 40–120 ACEGHM6½,6¾,77 ⁄ 8,8½,8¾,12¼

B4LRGSP 617X 41 ⁄ 8,45 ⁄ 8,6 2,500–5,500 40–120 AGHLM

C44RLRGSP 617X 57 ⁄ 8,6,77 ⁄ 8,8¾, 3,000–6,000 40–120 ACEGHM

C45 617X 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–6,000 40–120 ACEGHLM6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C45LRGSP 617X 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–6,000 40–120 ACEGHM6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C47 627Y 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–6,000 40–120 ACEGHLM6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C47LRGSP 627Y 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–6,000 40–120 ACEGHM6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

W47LRGSP 627Y 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 3,000–6,000 40–120 ACEGHM

B47LRGSP 627Y 41 ⁄ 8,6,61 ⁄ 8 3,000–6,000 40–120 AGHLM

C48LRGSP 627X 8½ 3,000–6,000 40–120 ACEGHMC5 637X 37 ⁄ 8,4¾,57 ⁄ 8,6,61 ⁄ 8, 3,000–6,000 40–120 ACEGHLM

6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C5LRGSP 637X 37 ⁄ 8,4¾,57 ⁄ 8,6,61 ⁄ 8, 3,000–6,000 40–120 ACEGHM6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C5VL5G 637X 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–6,000 40–120 ACEGHM6½,6¾,77 ⁄ 8,8½,8¾,12¼

B5LRGSP 637X 6,61 ⁄ 8,6¼ 3,000–6,000 40–120 AGHLM

C57 647Y 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–6,500 40–120 ACEGHLM6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C57LRG 647Y 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–6,000 40–120 ACEGHM6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

W57LRG 647Y 77 ⁄ 8,8½,8¾,12¼ 3,000–6,000 40–120 ACEGHM

B57LRGSP 647Y 3¾,41 ⁄ 8,4¾,57 ⁄ 8,6, 3,000–6,000 40–240 AGHLM61 ⁄ 8,6¼,6½,8½

C6LRGSP 647Y 57 ⁄ 8,6,8½,8¾ 3,000–6,000 40–240 ACEGHLMT

C65LRGSP 647Y 77 ⁄ 8,12¼ 3,000–6,000 40–240 ACEGHLMTReedHycalog (Grant Prideco)

EHP61 617 8½ 3,500–6,000 40–80 Y

EHP61A 617 83 ⁄ 8,8½ 3,500–6,000 40–80 X

HP61A 617 77 ⁄ 8,8¾,12¼ 3,500–6,000 40–80 X

HP61H 617 77 ⁄ 8 3,500–6,000 40–80 X

SL61 617 6,6½ 3,500–6,000 40–80 Y

SL61A 617 6,61 ⁄ 8,6¼,6½ 3,500–6,000 40–80 X

TD61 617 77 ⁄ 8,8½,8¾,97 ⁄ 8 3,500–6,000 40–80 Y

TD61A 617 77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8 3,500–6,000 40–80 X

HP62 627 77 ⁄ 8,8½,8¾,11,12¼ 3,500–6,000 40–70 Y

HP62A 627 8½,105 ⁄ 8,12¼ 3,500–6,000 40–70 X

HP62H 627 77 ⁄ 8 3,500–6,000 40–70 X

SL62 627 4½,45 ⁄ 8,4¾,47 ⁄ 8,61 ⁄ 8 3,500–6,000 40–70 Y

SL62A 627 55 ⁄ 8,61 ⁄ 8,6¼,6½ 1,000–4,000 60–350 GY

TD62 627 8½,8¾ 3,500–6,000 40–70 Z

TD62A 627 77 ⁄ 8,8½,8¾,97 ⁄ 8 3,500–6,000 40–70 Z

EHP63 637 83 ⁄ 8 3,500–6,000 40–80 X

HP63 637 37 ⁄ 8,77 ⁄ 8,83 ⁄ 8,8½, 3,500–6,000 40–70 Y105 ⁄ 8,12¼

SL63 637 37

⁄ 8,57

⁄ 8,61

⁄ 8,6½ 3,500–6,000 40–70 YTD63 637 83 ⁄ 8,8¾,97 ⁄ 8 3,500–6,000 40–70 Z

HP64 647 8¾,97 ⁄ 8,12¼ 3,500–6,000 40–70 Y

TD64 647 77 ⁄ 8,8¾ 3,500–6,000 40–70 Z

EMS62 625M 17½ 2,000–3,500 40–350 CGMNY

JA62 627A 77 ⁄ 8 3,500–6,000 40–70 AGX

Smith

F4 617X 8½,8¾,97 ⁄ 8,12¼ 3,000–7,000 50–160 X

F45H 617X 77 ⁄ 8,97 ⁄ 8 3,000–7,000 50–160 X

F45HOD 617X 77 ⁄ 8,97 ⁄ 8 3,000–7,000 50–160 WX

F47 617Y 8¾ 3,000–7,000 50–160 Y

F47AV 617Y 77 ⁄ 8,11 3,000–7,000 50–160 AY

F47DOD 617Y 8½ 3,000–7,000 50–160 WY

F47H 627Y 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 3,000–7,000 50–160 Y

F47HD 627Y 8¾ 3,000–7,000 50–160 WY

F47HDD 627Y 8¾ 3,000–7,000 50–160 WY

F47HDOD 627Y 8¾,12¼ 3,000–7,000 50–160 WY

F47HOD 627Y 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 3,000–7,000 50–160 WY

F47HV 627Y 8¾ 3,000–7,000 50–160 Y

F47HY 627Y 77 ⁄ 8 3,000–7,000 50–160 Y

F47HYV 627Y 77

⁄ 8 3,000–7,000 50–160 YF47OD 617Y 8½,105 ⁄ 8 3,000–7,000 50–160 WY

F4D 617X 8½,12¼ 3,000–7,000 50–160 WX

F4DOD 617X 8½,12¼ 3,000–7,000 50–160 WX

F4OD 617X 8½,8¾,97 ⁄ 8,12¼ 3,000–7,000 50–160 WX

F5 627X 8½ 3,000–7,000 50–160 X

F5OD 627X 8½ 3,000–7,000 50–160 WX

F41 77 ⁄ 8 3,000–7,000 50–160 X

F41OD 77 ⁄ 8 3,000–7,000 50–160 WX

F43Y 77 ⁄ 8,8½,8¾ 3,000–7,000 50–160 Y

F45B 8¾ 3,000–7,000 50–160 X

F45BD 8¾ 3,000–7,000 50–160 WX

F45BDOD 8¾ 3,000–7,000 50–160 WX

F45BOD 8¾ 3,000–7,000 50–160 WX

F45H 77 ⁄ 8,8¾ 3,000–7,000 50–160 X

F45HOD 8¾ 3,000–7,000 50–160 WX

G40YOD 615Y 12¼ 2,000–6,000 50–300 BGHMWY

GF40TD 617X 83 ⁄ 8 3,000–7,000 50–280 BGHMX

GF40YDOD 627Y 8½,10½ 3,000–7,000 50–280 BGHMWY

GF40YTD 627Y 83 ⁄ 8 3,000–7,000 50–280 BGHMWY

GF40YTDOD 627Y 83 ⁄ 8 3,000–7,000 50–280 BGHMWY

GFH40YOD 8½ 3,000–7,000 50–280 BGHMWY

GF40YDOD 8½ 2,500–6,000 50–280 BGHMWY

GF40YOD 8½ 2,500–6,000 50–280 BGHMWY

GF45YOD 8½ 2,500–6,000 50–280 BGHMWY

GH40 615X 12¼ 2,000–6,000 50–300 BGHMX

GH40OD 615X 12¼ 2,000–6,000 50–300 BGHMWX

GH40Y 615Y 12¼ 2,000–6,000 50–300 BGHMY

GH40YOD 615Y 12¼ 2,000–6,000 50–300 BGHMWYMF45HV 617X 77 ⁄ 8 2,500–6,000 50–250 HMX

MF47 617Y 4¾ 2,500–6,000 50–250 HMY

MF47OD 617Y 8½ 2,500–6,000 50–250 HMWY

MF4HV 617X 77 ⁄ 8 2,500–6,000 50–250 HMX

MF5 627X 4¾,83 ⁄ 8 2,000–5,000 50–250 HMX

MF5D 627X 4¾ 2,000–5,000 50–250 HMWX

MF5DODPD 627X 6,8½ 2,000–5,000 50–250 HMWX

MF5H 627X 8½ 2,000–5,000 50–250 HMX

MF5HOD 627X 8½ 2,000–5,000 50–250 HMWX

MF5HYOD 627Y 8½ 2,500–6,000 50–250 HMWY

MF41V 77 ⁄ 8 2,500–6,000 50–250 HMX

XR40 617X 55 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾ 2,000–6,000 40–270 HMX

XR40D 617X 61 ⁄ 8 2,000–6,000 40–270 HMWX

XR40DOD 617X 6,6½,6¾ 2,000–6,000 40–270 HMWX

XR40HYOD 627Y 6 2,000–6,000 40–270 HMWY

XR40OD 617X 61 ⁄ 8,6¾ 2,000–6,000 40–270 HMWX

XR40Y 627Y 5½,6,61 ⁄ 8,6¼,6½ 2,000–6,000 40–270 HMY

XR40YDD 627Y 57 ⁄ 8,6,61 ⁄ 8 2,000–6,000 40–270 HMWY

XR40YDOD 627Y 57 ⁄ 8,6,6½ 2,000–6,000 40–270 HMWY

XR40YOD 627Y 5½,57 ⁄ 8,6,61 ⁄ 8,6½ 2,000–6,000 40–270 HMWYXR45YDDPD 627Y 57 ⁄ 8,6,61 ⁄ 8 2,000–6,000 40–270 HMWY

XRH40YOD 627Y 6 2,000–6,000 40–270 HMWY

TIX

Z40G 615X 8½ 2,500–5,500 40–70 GX

X40G 617X 55 ⁄ 8,57 ⁄ 8,6¼,75 ⁄ 8,77 ⁄ 8 2,500–5,000 40–80 GX

X40G 617X 8½,85 ⁄ 8,95 ⁄ 8,105 ⁄ 8,12¼ 2,500–6,000 40–80 GX

X40G 617X 15½ 2,000–5,500 40–80 GX

X50G 627X 55 ⁄ 8–77 ⁄ 8 3,000–5,000 40–70 GX

X50G 627X 8½–12¼ 3,000–6,000 40–70 GX

K50G 627X 37 ⁄ 8,4 1,000–2,500 40–60 GX

X60G 637Y 55 ⁄ 8,57 ⁄ 8 3,000–5,000 40–60 GY

X60G 637Y 8½,12¼ 3,000–6,000 40–60 GY

A60 632Y 97 ⁄ 8,12¼ 3,000–5,500 40–60 AGY

A60 632Y 15 2,500–5,000 40–60 AGY

Tri-Max

TM613 613 4¼–12¼ 2,000–4,500 60–120

TM615 615 4½–12¼ 2,000–4,500 60–120

TM617 617 4½–12¼ 2,000–4,500 60–120

TM622 622 6–17½ 2,000–4,500 60–120

TM625 625 6–12¼ 2,000–4,500 60–120TM627 627 6–12¼ 2,000–4,500 60–120

Varel

ETR44G 6 15X 12¼,17½ 3,500–6,000 50–80 GW

CH44 617X 77 ⁄ 8,8½,8¾ 2,500–6,000 50–180 MW

ETD44 617X 57 ⁄ 8,6,61 ⁄ 8,6¼,6½, 3,500–6,000 50–80 W8½,12¼

CH45A 627A 77 ⁄ 8,8¾,87 ⁄ 8 2,500–6,000 50–180 AW

CH45 627Y 12¼ 2,500–6,000 50–180

ETD45 627Y 12¼ 4,000–6,500 40–70

ETD45A 627A 105 ⁄ 8,11 3,500–5,500 50–80 AW

CH47 627Y 77 ⁄ 8,8½,8¾ 4,000–6,500 50–90 W

CH47A 627A 6¼,6½ 3,000–6,000 50–140 AW

ETD48 627X 4¾,47 ⁄ 8,57 ⁄ 8 4,000–6,500 75–50 W

CH49 627Y 77 ⁄ 8,8¾ 4,000–6,500 50–90 W

CH57AH 637A 8¾,87 ⁄ 8 3,500–6,000 50–90 AW

CH55 637Y 77 ⁄ 8,8½ 3,500–6,000 50–80 W

ETD55 637Y 57 ⁄ 8,61 ⁄ 8,8½,8¾ 4,000–7,000 40–70 W

CH57 637Y 8¾ 3,500–6,000 50–80 W

CH67 647Y 61 ⁄ 8,77 ⁄ 8,83 ⁄ 8 3,500–6,000 50–90 W





I A D C c o d e



l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e


Drill Out

Hughes Christensen


RWD 2S M333 3x2¾,41 ⁄ 8x3¾, 200–3,000 50–200 DGHMVW6½x5¾,6.7x5.95,7x6,7¼x6,7½X6.3,8x65 ⁄ 8,97 ⁄ 8x83 ⁄ 8,12¼x105 ⁄ 8,13¾x12¼,14¾x12¼,17x14½,20x17


Fish tail bits

Bit-Tech

DP-440-B1P M131 6¼ 300–2,000 100–500 ADGMVW


FM2563/ M221 6¾ 500–2,500 60–400 MVWFM3563

PDC drill bits

Bit-Tech

HP-440-B M342 3½,35 ⁄ 8,3¾,37 ⁄ 8,4, 200–3,000 200–1,000 ADFGHM-

41 ⁄ 8,4¼,43 ⁄ 8,4½,45 ⁄ 8, NVW4¾,57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾

HP-440-B13 M232 6,61 ⁄ 8,6¼,6½,6¾ 200–3,000 60–600 ADGHMVW

DP-440-B2U M242 77 ⁄ 8,8½,8¾ 400–3,000 60–600 ADGMVW

DP-B45 M242 77 ⁄ 8,8¾ 400–3,000 60–600 ADGMVW

DP-B66 M242 77 ⁄ 8,8¾ 400–3,000 60–600 ADGMVW

Dowdco

TM-473 M243 4¾,57 ⁄ 8,6,62 ⁄ 8,6½,6¾ 400–3,000 50–250 ADGHMV

TM-474 M343 57 ⁄ 8–77 ⁄ 8 400–3,000 50–250 ADGHMV

TM-376 M333 77 ⁄ 8–12¼ 400–3,500 50–200 ADGHMV

TM-388 M333 77 ⁄ 8–12¼ 400–3,500 50–200 ADGHMV

GeoDiamond

QDS27 S243 2¾x3,3¾x41 ⁄ 8, 200–3,000 60–600 GMNUmVW4¾x55 ⁄ 8,55 ⁄ 8x83 ⁄ 8,6x7,65 ⁄ 8x75 ⁄ 8,7x83 ⁄ 8,7¾x8½,8½x97 ⁄ 8,97 ⁄ 8x113 ⁄ 8,105 ⁄ 8x12¼,12¼x14¼,12¼x14¾,13½x17½,14½x17½

QDS56 S233 12¼x14¾,14½x17½ 200–3,000 60–600 GMNUmVWQDM57 M332 6x7 400–2,000 60–600 GMNUmVW

QDS59 S333 55 ⁄ 8x63 ⁄ 8,65 ⁄ 8x75 ⁄ 8 200–3,000 60–600 GMNUmVW

QDG54 S333 6½x7½,75 ⁄ 8x8½, 400–3,000 60–600 GMNUmVW9¼x10¼,105 ⁄ 8x11½,12¼x13½

QDG55 S333 8½x97 ⁄ 8,12¼x14¼ 400–3,000 60–600 GMNUmVW

QDR54 S333 8½x97 ⁄ 8,105 ⁄ 8x11½, 400–3,000 60–600 GMNUmVW105 ⁄ 8x117 ⁄ 8,105 ⁄ 8x12¼,12¼x14¾,14½x17½

QDR55 S333 12¼x14 400–3,000 60–600 GMNUmVW

QDR76 S223 9¼x10¾ 400–3,000 60–600 GMNUmVW

SHO73 S223 16 400–3,000 60–600 GWOUIV

SHO78 S223 61 ⁄ 8 400–3,000 60–600 GWOUIV

M40 M333 57 ⁄ 8,6½,77 ⁄ 8,8½,8¾, 400–2,000 60–600 GMNUmVW97 ⁄ 8,12¼

M42 M333 77 ⁄ 8,8½,97 ⁄ 8,105 ⁄ 8,12, 400–2,000 60–600 GMNUmVW12¼

M50 M333 6,61 ⁄ 8,6¼,6½,6¾, 400–2,000 60–600 GMNUmVW7½,75 ⁄ 8,77 ⁄ 8,83 ⁄ 8,8½,8¾,93 ⁄ 8,9½,97 ⁄ 8,105 ⁄ 8,115 ⁄ 8,12¼

M51 M333 8¾ 500–3,000 60–600 GMNUmVW

M52 M333 12¼, 500–3,000 60–600 GMNUmVW

M53 M333 57 ⁄ 8,6,61 ⁄ 8,6½,6¾, 500–3,000 60–600 GMNUmVW7½,8½

M54 M333 61 ⁄ 8 500–3,000 60–600 GMNUmVW

M58 M333 3¾,77 ⁄ 8,8½ 500–2,000 60–600 GMNUlVW

M63 M323 77 ⁄ 8,12¼, 500–2,000 60–600 GMNUmVW

M65 M323 12¼,13½ 500–2,000 60–600 GMNUmVW

M67 M323 12¼, 500–2,000 60–600 GMNUmVW

M68 M323 12¼,14½,14¾,17½ 500–2,000 60–600 GMNUmVW

MRS68 M323 8½,9½,12¼ 500–2,000 60–600 GMNUmVW

MRS681 M323 8½ 500–2,000 60–600 GMNUmVW

SRS681 S323 17½ 500–2,000 60–600 GMNUmVW

M78 M223 61 ⁄ 8, 500–2,000 60–600 GMNUmVW

M785 M223 61 ⁄ 8, 500–2,000 60–600 GMNUmVW

MDT52 M332 57 ⁄ 8,6,61 ⁄ 8,6½,6¾,7 500–2,000 60–400 DGMNUmVW

MRS68 M323 8½,8¾,9½,97 ⁄ 8, 500–2,000 60–400 DGMNUmVW12¼,17½

MRS73 M223 97 ⁄ 8 500–2,000 60–400 DGMNUmVW

M69 M223 77

⁄ 8,83

⁄ 8,8½,8¾,97 ⁄ 8,12¼ 400–2,000 60–600 GMNUmVW

M71 M323 8½,105 ⁄ 8,12,12¼, 400–2,000 60–600 GMNUmVW14½,14¾

M73 M223 6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8,12,12¼,16,17½ 500–2,000 60–400 GMNUmVW

SRS71 S223 18¼ 500–2,000 60–400 GMNUmVW

M74 M223 12¼ 500–2,000 60–400 GMNUmVW

M746 M223 12 500–2,000 60–400 GMNUmVW

M76 M233 6,61 ⁄ 8,6¼,6½,6¾, 400–2,000 60–600 GMNUlVW77 ⁄ 8,8½,8¾

MA81 M233 16 400–2,000 60–600 GMNUlVW

MA82 M223 77 ⁄ 8,8½,8¾,12¼, 400–2,000 60–600 GMNUmVW14¾,16,17½,18½

M83 M421 12¼,14¾,17½ 500–2,000 60–600 GMNUmVW

MDT285 M233 41 ⁄ 8,4½,4¾,6,61 ⁄ 8 500–2,000 60–400 DGMNUmVW

MDT48 M333 6,6½ 500–2,000 60–400 DGMNUmVW

MDT74 M223 6,77 ⁄ 8,8½,95 ⁄ 8,97 ⁄ 8, 500–2,000 60–400 DGMNUmVW105 ⁄ 8,12¼,14¾,17½

QDS41 S333 12¼x14¼,12¼x14½ 200–3,000 60–600 GMNUmVW

QDS42 S333 7½x8½,8½x97 ⁄ 8, 200–3,000 60–600 GMNUmVW91 ⁄ 8x10½,9½x11,105 ⁄ 8x121 ⁄ 8,105 ⁄ 8x12¼,12¼x13¼,12¼x13½,14x17,14½x17½,16x20,17x20

S68 S223 14¾,16,17½ 200–3,000 60–600 GMNUmVW

SRS73 S223 8½,9½ 200–3,000 60–600 GMNUmVW


FM2844/ M433 97 ⁄ 8 500–2,500 60–400 MVWFM3844

FM2844/ M332 12¼ 500–2,500 60–400 MVWFM3844

FM2845/ M433 8½ 500–2,500 60–400 MVWFM3845

FM2863/ M323 14¾ 500–2,500 60–400 MVWFM3863

FM2865/ M324 12¼ 500–2,500 60–400 MVWFM3865

SE3831 M432 6–12¼ 200–2,000 60–400 DVW

Hughes Christensen

HC305 M343 41 ⁄ 8,4½ 235–2,500 50–350 DGMVW

HC305Z M343 41 ⁄ 8,4½ 235–2,500 50–350 DGMVW

HC405 M333 41 ⁄ 8–77 ⁄ 8 235–2,500 50–350 DGMVW

HC405Z M333 41 ⁄ 8–77 ⁄ 8 235–2,500 50–350 DGMVW

HCM405 M333 41 ⁄ 8–77 ⁄ 8 235–2,500 50–350 DGMVW

HCM405Z M333 41

⁄ 8–77

⁄ 8 235–2,500 50–350 DGMVWHCR405 M333 41 ⁄ 8–77 ⁄ 8 235–2,500 50–350 DGVW

HCR405Z M333 41 ⁄ 8–77 ⁄ 8 235–2,500 50–350 DGVW

HC505 M323 77 ⁄ 8,8¾ 235–2,500 50–350 DGMVW

HC505Z M323 77 ⁄ 8,8¾ 235–2,500 50–350 DGMVW

HCM505 M323 77 ⁄ 8,8¾ 235–2,500 50–350 DGMVW

HCM505Z M323 77 ⁄ 8,8¾ 235–2,500 50–350 DGMVW

HCR505 M323 77 ⁄ 8,8¾ 235–2,500 50–350 DGVW

HCR505Z M323 77 ⁄ 8,8¾ 235–2,500 50–350 DGVW

HC605 M323 6¼–17½ 235–2,500 50–350 DGMVW

HC605Z M323 6¼–17½ 235–2,500 50–350 DGMVW

HCM605 M323 6¼–17½ 235–2,500 50–350 DGMVW

HCM605Z M323 6¼–17½ 235–2,500 50–350 DGMVW

HCR605 M323 6¼–17½ 235–2,500 50–350 DGVW

HCR605Z M323 6¼–17½ 235–2,500 50–350 DGVW

HC306 M343 55 ⁄ 8,61 ⁄ 8 235–2,500 50–350 DGMVW

HC306Z M343 55 ⁄ 8,61 ⁄ 8 235–2,500 50–350 DGMVW

HC406 M333 6–12½ 235–2,500 50–350 DGMVW

HC406Z M333 6–12½ 235–2,500 50–350 DGMVW

HCM406 M333 6–12½ 235–2,500 50–350 DGMVW

HCM406Z M333 6–12½ 235–2,500 50–350 DGMVWHCR406 M333 6–12½ 235–2,500 50–350 DGVW

HCR406Z M333 6–12½ 235–2,500 50–350 DGVW

HC506 M323 6¾–12¼ 235–2,500 50–350 DGMVW

HC506Z M323 6¾–12¼ 235–2,500 50–350 DGMVW

HCM506 M323 6¾–12¼ 235–2,500 50–350 DGMVW

HCM506Z M323 6¾–12¼ 235–2,500 50–350 DGMVW

HCR506 M323 6¾–12¼ 235–2,500 50–350 DGVW

HCR506Z M323 6¾–12¼ 235–2,500 50–350 DGVW

HC606 M323 77 ⁄ 8–18½ 235–2,500 50–350 DGMVW

HC606Z M323 77 ⁄ 8–18½ 235–2,500 50–350 DGMVW

HCM606 M323 77 ⁄ 8–18½ 235–2,500 50–350 DGMVW

HCM606Z M323 77 ⁄ 8–18½ 235–2,500 50–350 DGMVW

HCR606 M323 77 ⁄ 8–18½ 235–2,500 50–350 DGVW

HCR606Z M323 77 ⁄ 8–18½ 235–2,500 50–350 DGVW

HC407 M333 5¾–12¼ 235–2,500 50–350 DGMVW

HC407Z M333 5¾–12¼ 235–2,500 50–350 DGMVW

HCM407 M333 5¾–12¼ 235–2,500 50–350 DGMVW

HCM407Z M333 5¾–12¼ 235–2,500 50–350 DGMVW

HCR407 M333 5¾–12¼ 235–2,500 50–350 DGVW

HCR407Z M333 5¾–12¼ 235–2,500 50–350 DGVW

HC507 M323 5¾ 235–2,500 50–350 DGMVW

HC507Z M323 5¾ 235–2,500 50–350 DGMVW

HCM507 M323 5¾ 235–2,500 50–350 DGMVW

HCM507Z M323 5¾ 235–2,500 50–350 DGMVW

HCR507 M323 5¾ 235–2,500 50–350 DGVW

HCR507Z M323 5¾ 235–2,500 50–350 DGVW

HC607 M323 83 ⁄ 8–17½ 235–2,500 50–350 DGMVW

HC607Z M323 83 ⁄ 8–17½ 235–2,500 50–350 DGMVW

HCM607 M323 83 ⁄ 8–17½ 235–2,500 50–350 DGMVW

HCM607Z M323 83 ⁄ 8–17½ 235–2,500 50–350 DGMVW

HCR607 M323 83 ⁄ 8–17½ 235–2,500 50–350 DGVW

HCR607Z M323 83 ⁄ 8–17½ 235–2,500 50–350 DGVW

NQL (formerly DPI)

CSD+244 S133 97 ⁄ 8x11¾,105 ⁄ 8x12¼, 4,000–4,500 60–200 DGHKMVWBi-center 12¼x141 ⁄ 8,

13¾x16½,14½x17,14½x17¼

CSD+344 S233 8½x97 ⁄ 8,9½x11, 3,500–3,800 60–200 DGHKMVWBi-center 105 ⁄ 8x12¼CSD+422 S233 6½x7½,7½x8½ 2,500–2,800 60–200 DGHKMVWBi-center

CSD244 S133 97 ⁄ 8x11¾ 3,800–4,000 60–200 DGHKMVBi-center

MP24 M233 97 ⁄ 8 250–3,000 60–450 DGHKMV

SP43 S233 17 250–4,500 60–450 DHKMV

SP54 S233 16 300–4,000 60–450 DHKMV

SP55 S223 12¼ 250–3,000 60–450 DHKMV

SP63 S223 12¼ 250–3,000 60–450 DHKMV VSP45 S233 12¼ 250–3,000 60–450 RST KV

VSP53 S123 17½ 250–4,500 60–450 RST KV

PDC-Gearhart

MS1677 M333 77 ⁄ 8 300–2,000 60–250 GHWUhM

MS1366 M342 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 300–2,000 60–300 GHWUmM

MS1354 M223 4¾,61 ⁄ 8,6¾ 300–2,000 60–300 GHWUmM

MR1363 M331 3¾,41 ⁄ 8,4½,4¾,6, 300–2,000 60–300 GHWUmM61 ⁄ 8,6¼,6½,6¾

MS9563 M233 4¼,45 ⁄ 8,4¾ 300–2,000 60–300 GHWUmM

MR0863 M333 41 ⁄ 8,4½,4¾,5,61 ⁄ 8,6½ 300–3,000 60–300 GHWUmM

Precise

M255M M233 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40–1,000 V8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½

S257M S333 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40–1,000 V8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½

M258M M333 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40–1,000 V8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½

S266L S123 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40–1,000 V8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½

S266M S333 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40–1,000 V8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½

S266D S131 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40–1,000 V, Directional8½,8¾,97 ⁄ 8,12¼, application13¾,14¾,17½ bit

S155M S232 37 ⁄ 8,4¾,6,61 ⁄ 8,6¼,6½ 500–4,500 40–1,000 V

S557M S232 12¼,13¾,17½ 500–4,500 40–1,000 V

S567M S232 12¼,13¾,17½ 500–4,500 40–1,000 V


DS245 F105 8½ 400–3,000 Variable GHMWUm

DS49ST M233 77 ⁄ 8–12¼ 400–3,000 Variable GHMWUmV

DS103H M321 400–3,000 Variable GHMWUm


DS88 M321 95 ⁄ 8–12¼ 400–3,000 Variable GHMWUh

DS138 M322 12¼ 400–3,000 Variable GHMWUmV

RS162H M322 8½,9½ 400–3,000 Variable GHWUmRotary

Steerable

DS110 M323 8½–8¾ 400–3,000 Variable GHMWUm

DS110H M323 8½–16 400–3,000 Variable GHMWUm

DS173D M323 6¾–8½ 400–3,000 Variable GHMWUm


DS77H M323 10½–12¼ 400–3,000 Variable GHMWUh

DS129D M332 61 ⁄ 8 400–3,000 Variable GHMWUh

DS56D M332 83 ⁄ 8–12¼ 400–3,000 Variable GHMWUmV

DS133H M333 12¼ 400–3,000 Variable GHMWUm

DS136D M333 12¼ 400–3,000 Variable GHMWUmV



DS131 M343 8¾ 400–3,000 Variable GHMUh

DS103D M421 12¼–14¾ 400–3,000 Variable GHMWUm

DS124D M422 17½ 400–3,000 Variable GHMWUh

RS162D M422 89 ⁄ 20–17½ 400–3,000 Variable GHWUhRotary

Steerable

DS120D M433 12¼ 400–3,000 Variable GHMWUh


DS75 M433 83 ⁄ 8,8½ 400–3,000 Variable GHMWUhDS94H M433 8½–16 400–3,000 Variable GHMWUh





I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e


DS43ST S132 57 ⁄ 8–12¼ 400–3,000 Variable GHMWUm

DS126HD S323 16 400–3,000 Variable GHMWUm

RS216H S323 12¼ 400–3,000 Variable GHWUmVRotary

Steerable

RS238 S323 12¼ 400–3,000 Variable GHWUmRotary

Steerable

DS70 S324 77 ⁄ 8–97 ⁄ 8 400–3,000 Variable GHMWUh

DS70H S324 12¼–17½ 400–3,000 Variable GHMWUh

RS164 S324 8½ 400–3,000 Variable GHWUmRotary

Steerable

DS107H S332 105 ⁄ 8–16 400–3,000 Variable GHMWUmV

DS141 S332 8½ 400–3,000 Variable GHMWUm

RS130D S332 83 ⁄ 8–14¾ 400–3,000 Variable GHWUhRotary

Steerable

DS102H S333 6½x7½–14½x17½ 400–3,000 Variable GHMWUh

DS183 S333 105 ⁄ 8x14¾ 400–3,001 Variable GHMWUmConcentrichole opener

DS92H S334 8½–17½ 400–3,000 Variable GHMWUh

DS102HD S433 8½x97 ⁄ 8–105 ⁄ 8x12¼ 400–3,000 Variable GHMWUh

RockBit

516D S143 4¾ 300–2,000 70–250 GUmMH518DXP S443 77 ⁄ 8,8½,8¾ 750–3,000 70–250 GUmMH

538D2HF S443 57 ⁄ 8,6,61 ⁄ 8,6¼ 750–3,000 70–250 GUmMH

526RB S233 77 ⁄ 8 500–3,000 60–400 GHMVW

KDM44RN S333 6¼–8¾ 250–4,000 80–1,000 GM

KD4513 S233 4¾,61 ⁄ 8,6¼,77 ⁄ 8,8½, 500–3,000 60–400 GHMVW8¾,97 ⁄ 8,12¼

KD4613 S333 6,61 ⁄ 8,6¼,77 ⁄ 8,8½, 500–3,000 60–400 GHMVW8¾,97 ⁄ 8,12¼

KD4819 S333 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 500–3,000 60–400 GHMVW

KDM425 S143 3¾–47 ⁄ 8 250–3,000 60–300 DM

KD4508 S343 4¾,61 ⁄ 8,6¼,77 ⁄ 8,8½, 500–3,000 60–400 GHMVW8¾,97 ⁄ 8,12¼

KD5608 S443 6,61 ⁄ 8,6¼,77 ⁄ 8,8½, 500–3,000 60–400 GHMVW8¾,97 ⁄ 8,12¼

KD4713 S433 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 500–3,000 60–400 GHMVW

Tri-Max


United DiamondUD513 S615 3¾,37 ⁄ 8,41 ⁄ 8,4¼,4½, 500–4,500 30–600 MGVUm

45 ⁄ 8 4¾,5¾,55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,9½,97 ⁄ 8,105 ⁄ 8,12¼,13¾

UD516 S615 61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8, 500–4,500 30–600 MGVUm8½,8¾,12,12¼,14¾

UD516RR S915 6¼,77 ⁄ 8,8½,8¾,12¼ 500–4,500 30–600 MGVUm

Varel

MKF58 M432 77 ⁄ 8,8½,83 ⁄ 8,8¾,95 ⁄ 8, 400–2,000 60–1,000 GIMNUhV97 ⁄ 8,105 ⁄ 8,12¼,13¾

MKF78 M323 12 500–2,000 60–400 GMW

MKM57 M433 57 ⁄ 8,6,61 ⁄ 8,6¼,6½ 500–2,000 60–400 GMW

MKM75 M323 17½ 500–2,000 60–400 GMW

MKM76 M223 97 ⁄ 8 500–2,000 60–400 GMW

MKS35 M232 37 ⁄ 8,41 ⁄ 8,4¾,57 ⁄ 8,6, 500–2,000 60–400 GMW61 ⁄ 8,6¼,6½

MKS36 M332 41 ⁄ 8,4¾,57 ⁄ 8,6,61 ⁄ 8, 500–2,500 60–400 GMW6¼,6½

MKS36 M332 77 ⁄ 8,8½,83 ⁄ 8,8¾ 500–2,500 60–400 GMW

MKS37 M432 57 ⁄ 8,6,61 ⁄ 8,6¼,6½ 500–2,500 60–400 GMWMKS54 M132 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–2,000 60–400 GMW

8½,8¾

MKS55 M232 6,61 ⁄ 8,6¼,6½,6¾, 500–2,000 60–400 GMW77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8,105 ⁄ 8,12¼,13¾

MKS55 M232 6,61 ⁄ 8,6¼,6½,6¾, 500–2,000 60–400 GMW77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8,105 ⁄ 8,12¼,13¾

MKS55 M232 6,61 ⁄ 8,6¼,6½,6¾, 500–2,000 60–400 GMW77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8,105 ⁄ 8,12¼,13¾

MKS56 M332 6,61 ⁄ 8,6¼,6½,6½, 500–2,000 60–400 GMW6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,12¼,13¾

MKS56 M332 6,61 ⁄ 8,6¼,6½,6½, 500–2,000 60–400 GMW6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,12¼,13¾

MKS57 M432 6,77 ⁄ 8,8½,83 ⁄ 8,8¾, 400–2,000 60–1,000 GIMNUhV97 ⁄ 8,105 ⁄ 8,12¼,13¾

MKS57 M432 6,77 ⁄ 8,8½,83 ⁄ 8,8¾, 500–2,000 60–400 GMW

97 ⁄ 8,105 ⁄ 8,12¼,13¾

MKS59 M433 77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8, 500–2,500 60–400 GMW105 ⁄ 8,12¼,13¾

MKS68 M323 8½,8¾ 500–2,000 60–400 GMW

MKS70 M323 16,17½ 500–2,000 60–400 GMW

MKS75 M222 6,77 ⁄ 8,83 ⁄ 8,8½,8¾, 500 –2,000 60–400 GMW97 ⁄ 8,97 ⁄ 8,11,12¼,13¾,14¾

MKS76 M323 77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8, 500–2,000 60–400 GMW105 ⁄ 8,12¼,13¾,17½

MKS77 M323 12¼ 500–2,000 60–400 GMW

MKS78 M323 12,12¼ 500–2,000 60–400 GMW

SKO56 S232 8½ 500–2,000 60–400 GMW

VB622M M313 12¼ 250–3,000 60–600 DGHMWKQUh

VB622S S313 12¼ 250–3,000 60–1,000 DGHMW-KNQUh

VB642M M423 12¼ 250–3,000 60–600 DGHMWKQUh

VB652M M423 12¼ 250–3,000 60–600 DGHMWKQUh

VB480M M133 3¾ 250–2,000 60–600 GMWKQUm

VB490M M133 3¾ 250–2,000 60–1,000 GHMW-KNQUh

VB458M M323 83 ⁄ 8,8½,8¾ 250–2,500 60–600 GHMWKQUh


MBC37 M233 3¾x41 ⁄ 8 200–1,700 60–400 GMWBi-center

MBC39 M233 6x7,6½x7½ 200–1,700 60–400 GMWBi-center


MBC57 M233 5½x6,55 ⁄ 8x63 ⁄ 8,Bi-center 83 ⁄ 8x97 ⁄ 8,8½x97 ⁄ 8 200–1,700 60–400 GMW

MBC58Bi-center M233 57 ⁄ 8x7,6x7,6½x7½, 200–1,700 60–400 GMW

12x14½,12x14,12¼x14¾


12¼x13½

MBC77 M323 6¾x7½,83 ⁄ 8x8¾, 200–1,700 60–400 GMWBi-center 12¼x13½

MBC78 M323 105 ⁄ 8x12¼,14½x17½ 200–1,700 60–400 GMWBi-center


Hughes Christensen

ECZ304 S233 6,61 ⁄ 8,6½,6¾,8½, 235–2,500 60–350 W97 ⁄ 8,12¼,17½,20,24

ECZ306 S333 6,61

⁄ 8,6½,6¾,8½, 235–2,500 60–350 W97 ⁄ 8,12¼,17½,20,24

ECZ404 S233 6¾,8½,97 ⁄ 8,12¼, 235–2,500 60–350 W17½,20,24

ECZ406 S343 6¾,8½,97 ⁄ 8,12¼, 235–2,500 60–350 W17½,20,24

PDC coring bits

Baker Hughes INTEQ

ARC415 S333 6,61 ⁄ 8,6½,6¾,8½, 235–2,500 60–350 W97 ⁄ 8,12¼,17½,20,24

ARC425 S233 6¾,8½,97 ⁄ 8,12¼, 235–2,500 60–350 W17½,20,24

RC476 S343 6¾,8½,97 ⁄ 8,12¼, 235–2,500 60–350 W17½,20,24

Bit-Tech

CP-440BU M342 6,61 ⁄ 8 300–2,000 50–500 AFGMVW

CP-440BU M232 77 ⁄ 8,8½,8¾ 300–2,000 50–500 AFGMVW

CP-440 M342 77 ⁄ 8,8½,8¾ 300–2,000 60–120 AFG

CP-B66 M232 61 ⁄ 8 300–2,000 50–500 AFGMVW


CD93 M233 6–12¼ 250–3,500 50–150 FFC3743 M432 53 ⁄ 8–12¼ 250–3,500 50–150 F

FC3843 M433 6½–12¼ 250–3,500 50–150 F

Varel

C1001 M432 6–12¼ 100–2,000 60–120 GIUm

C120 M432 6–12¼ 100–2,000 60–120 GIUm

CK58 M132 8½x412¼X5¼ 400–2,000 60–1,000 GIMNUhV


Bit-Tech

DN-423 M722 1¾,17 ⁄ 8,21 ⁄ 8,2¼,27 ⁄ 16, 600–3,500 60–600 ADGHMNR35 ⁄ 8,4½,4¾,61 ⁄ 8,6¼,6½,6¾

DG-420F M622 1¾,17 ⁄ 8,21 ⁄ 8,2¼,27 ⁄ 16, 600–3,500 60–600 ADGHIMR35 ⁄ 8,4½,4¾,61 ⁄ 8,6¼,6½,6¾

DN-303 M713 4½–4¾,5½–6½ 600–3,500 60–600 Custom

DN-333 M713 4½–4¾,5½–6¾ 600–3,500 60–600 Custom


TB16 M713 6½,12½ 300–3,000 80–1,000 MN

TBT17 M634 57 ⁄ 8,8½ 300–3,000 80–1,000 IMN

TBT703 M734 57 ⁄ 8,6,8½ 300–3,000 80–1,000 IMN

TT521 M622 57 ⁄ 8–12¼ 300–3,000 80–1,000 IMN

TT561 M624 41 ⁄ 8–12¼ 300–3,000 80–1,000 IMN

TT593 M724 3½,3¾ 300–3,000 80–1,000 IMN


Baker Hughes INTEQ

C201 D6X5 4¾–12¼ 500–3,000 60–500 Dbl Cone K

SC226 T5X8 4¾–12¼ 500–3,000 60–500 Dbl Cone K SC777 TSR8 4¾–12¼ 500–2,500 60–500 Round R

SC712 T524 4¾–12¼ 400–2,000 60–500 Low Inv GMF

Bit-Tech

CG-300F M623 6,61 ⁄ 8,6¼,77 ⁄ 8,8¾ 400–2,500 50–500 AGIKM

CN-403 M712 6,61 ⁄ 8,6¼,77 ⁄ 8,8¾, 400–2,500 50–500 AGKM

CN-333G M713 61 ⁄ 8,63 ⁄ 16,6¼,77 ⁄ 8,8¾ 400–2,500 50–500 AGMR

Varel

C310 M734 57 ⁄ 8–12¼ 100–2,000 60–120 GIUh

C320 M623 57 ⁄ 8–12¼ 100–2,000 60–120 GIUh

C320 RC M623 57 ⁄ 8–12¼ 100–2,000 60–120 GIUh

Medium-HardSteel tooth roller cone bits


HP21G 217 8½,12¼ 3,500–6,000 40–100 YG

Smith

FVH 217 6 2,000–5,000 50–160 S

OFH 321 41 ⁄ 8,6,61 ⁄ 8 2,000–5,000 70–180 S

OFM 231 3¾,37 ⁄ 8,41 ⁄ 8,4¼,4½, 2,000–5,000 70–180 S

4¾,47

⁄ 8,55

⁄ 8,5¾,6,61

⁄ 8SVH 215 83 ⁄ 8,8½,12¼,17½ 2,000–5,000 50–160 S

TIX

MH 231 3,3¼,37 ⁄ 8,4,4½ 1,500–2,500 40–60

MH 231 45 ⁄ 8,4¾,5,51 ⁄ 8 1,500–3,000 40–60

MH 231 55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼, 2,000–4,500 60–1006¾,7½,75 ⁄ 8,77 ⁄ 8

MH 231 83 ⁄ 8,8½,85 ⁄ 8,8¾,9, 2,500–5,500 60–1009½,95 ⁄ 8,105 ⁄ 8,10¾,11,115 ⁄ 8,12,12¼

MH 231 133 ⁄ 8,14¾,15,15½, 2,500–4,500 60–10017½,20

MH 231 22,23,24,26 2,500–4,000 60–100

MH-X 236 55 ⁄ 8,57 ⁄ 8,6,75 ⁄ 8 2,000–4,500 50–90 B

MH-X 236 8½,12¼ 2,500–5,500 50–90 B

MH-TX 237 57 ⁄ 8,6 2,000–4,500 50–90 BG

MH-TX 237 8½,12¼ 2,500–5,500 50–90 BG

MH-TZ 235 8½,12¼ 2,500–5,500 50–80 G

MH-Z 234 8½,9½,12¼ 2,500–5,500 50–80

MH-XZ 234 12¼,17½ 2,500–5,500 50–150

Tri-Max

TM223 223 6–12¼ 2,000–5,000 60–120

TM231 231 6–12¼ 2,000–5,000 60–120

Varel

L211 211S 15,20,23,24,26 2,500–6,500 50–150 S

L215 215S 12¼,17½ 2,500–6,500 50–140 S

ETD4 216S 37 ⁄ 8,4¾,47 ⁄ 8,6 2,500–7,000 50–120 S

L217 217S 8½,12¼ 2,500–7,000 50–120 S

CH4G 217S 8½ 2,500–7,000 80–250 GS

LH2 231S 14¾,15,20 3,000–6,500 50–120 S

L231 231S 15 3,000–6,500 50–120 S


Hughes Christensen

STX-50 637 3¾,37 ⁄ 8,4¾,5½,55 ⁄ 8, 3,000–7,000 50–90 GW57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾

STX-50A 637 37 ⁄ 8 3,000–7,000 50–90 GW

STX-60 647 61 ⁄ 8 3,000–7,000 50–90 GW

STX-66 647 6¾ 3,000–7,000 50–90 GW

STR-50 637 37 ⁄ 8,61 ⁄ 8 4,000–7,000 35–70 GW

STR-50DX 637 61 ⁄ 8 3,000–7,000 50–90 GW

STR-50FDX 637 61 ⁄ 8 3,000–7,000 50–90 GW

STR-M50A 637 37 ⁄ 8 3,000–7,000 50–90 GW

HR-55 637 77 ⁄ 8,115 ⁄ 8,12¼ 3,000–7,000 50–90 BGMW

HR-55H 637 77 ⁄ 8,8¾ 3,000–7,000 50–90 BGMW

HR-55R 637 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 3,000–7,000 50–90 BGMW

HR-55RG 637 8½,8¾,97 ⁄ 8 3,000–7,000 50–90 BGMW

HR-66 647 77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8, 3,000–7,000 50–90 BGMW12¼

HR-68 647 77 ⁄ 8,83 ⁄ 8,8½,8¾,105 ⁄ 8 3,000–7,000 50–90 BGMW

MX-50 647 57 ⁄ 8,8½ 3,000–7,000 50–90 BGMW

MX-50R 647 8¾ 3,000–7,000 50–90 BGMW

MX-50RG 647 8½ 3,000–7,000 50–90 BGMW

MX-55 647 83 ⁄ 8,8½,17½ 3,000–7,000 50–90 BGMW

MX-66 647 8½,8¾ 3,000–7,000 50–90 BGMW

XL-50A 637 6¼,77 ⁄ 8,8½,8¾,11 3,000–7,000 35–90 AC

Smith

F57 637Y 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 3,000–7,000 50–160 Y

F57DOD 637Y 77 ⁄ 8,12¼ 3,000–7,000 50–160 WY

F57H 637Y 12¼ 3,000–7,000 50–160 Y

F57OD 637Y 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼ 3,000–7,000 50–160 WY

F57Y 637Y 77 ⁄ 8 3,000–7,000 50–160 Y

F57YOD 637Y 77 ⁄ 8 3,000–7,000 50–160 WYF59 647Y 8¾ 3,000–7,000 50–110 Y





I A D C c o d e



l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e


F59D 647Y 8¾ 3,000–7,000 50–110 WY

F59OD 647Y 77 ⁄ 8,8½,8¾ 3,000–7,000 50–110 WY

F59Y 647Y 77 ⁄ 8,8¾ 3,000–7,000 50–110 Y

F59YDOD 647Y 77 ⁄ 8,8¾ 3,000–7,000 50–110 WY

F59YOD 647Y 77 ⁄ 8,8¾ 3,000–7,000 50–110 WY

F59YODV 647Y 77 ⁄ 8 3,000–7,000 50–110 WY

F59YV 647Y 77 ⁄ 8 3,000–7,000 50–110 Y

F67 647Y 77 ⁄ 8,8¾,97 ⁄ 8 3,000–7,000 50–110 Y

F67OD 647Y 77 ⁄ 8,8½,8¾,97 ⁄ 8, 3,000–7,000 50–110 WY12¼,14¾

F67Y 647Y 77 ⁄ 8,97 ⁄ 8 3,000–7,000 50–110 Y

F67YOD 647Y 77 ⁄ 8,8½,97 ⁄ 8 3,000–7,000 50–110 WY

F67YODV 647Y 77 ⁄ 8 3,000–7,000 50–110 WY

F67YV 647Y 77 ⁄ 8 3,000–7,000 50–110 Y

F68Y 647Y 77 ⁄ 8 3,000–7,000 50–110 Y

F68YOD 647Y 77 ⁄ 8 3,000–7,000 50–110 WY

M57DD 637Y 12¼ 2,000–5,000 50–250 HMWY

M57DOD 635Y 17½ 2,000–5,000 50–250 HMWY

MF57 637Y 4¾,47 ⁄ 8 3,000–6,000 50–250 HMY

MF57D 637Y 4¾ 3,000–6,000 50–250 HMWY

MF57DOD 637Y 83 ⁄ 8,8½ 3,000–6,000 50–250 HMWY

MF57OD 637Y 45 ⁄ 8,4¾,83 ⁄ 8,8½ 3,000–6,000 50–250 HMWY

XR50 637X 6,61 ⁄ 8,6½ 2,000–6,000 40–270 HMX

XR50DOD 637X 6 2,000–6,000 40–270 HMWX

XR50OD 637X 61 ⁄ 8 2,000–6,000 40–270 HMWX

XR50Y 637Y 37 ⁄ 8,47 ⁄ 8,6,61 ⁄ 8,6¼,6½ 2,000–6,000 40–270 HMYXR50YD 637Y 61 ⁄ 8,6½ 2,000–6,000 40–270 HMWY

XR50YDD 637Y 6¼ 2,000–6,000 40–270 HMWY

XR50YDOD 637Y 6,61 ⁄ 8,6½ 2,000–6,000 40–270 HMWY

XR50YOD 637Y 6,61 ⁄ 8,6½ 2,000–6,000 40–270 HMWY

Tri-Max

TM622 622 6–12¼ 3,000–5,000 60–100

TM625 625 6–17½ 3,000–5,000 60–100

TM627 627 6–12¼ 3,000–5,000 60–100

Drill Out

Hughes Christensen


RWD 2S M433 3x2¾,41 ⁄ 8x3¾, 200–3,000 50–200 DGHMVW6½x5¾,6.7x5.95,7x6,7¼x6,7½x6.3,8x65 ⁄ 8,97 ⁄ 8x83 ⁄ 8,12¼x105 ⁄ 8,

13¾x12¼,14¾x12¼,17x14½,20x17


PDC drill bits

Bit-Tech

HP-440-B M342 3½,35 ⁄ 8,3¾,37 ⁄ 8,4, 200–3,000 200–1,000 ADFGHM-41 ⁄ 8,4¼,43 ⁄ 8,4½,45 ⁄ 8, NVW4¾,57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾

HP-440-B13 M232 6,61 ⁄ 8,6¼,6½,6¾ 200–3,000 60–600 ADGHMVW

DP-440-B2U M242 77 ⁄ 8,8½,8¾ 200–3,000 60–600 ADGMVW

DP-B45 M242 77 ⁄ 8,8¾ 400–3,000 60–600 ADGMVW

DP-B66 M242 77 ⁄ 8,8¾ 400–3,000 60–600 ADGMVW

Dowdco

TM-463 M243 4¾–6½ 200–5,000 60–450 ADGHMV

TM-484 M443 6–6¾ 200–5,000 60–450 ADGHMV

TM-488P M443 6–6¾ 200–5,000 60–450 ADGHMV

TM-566 M233 77 ⁄ 8 200–5,000 60–400 ADGHMV

TM-588 M423 97 ⁄ 8–12¼ 200–5,000 60–250 ADGHMV

GeoDiamond

QDG71 S323 12¼x13¼ 200–3,000 60–600 GMNUhVW

QDS25 S422 43 ⁄ 32x4¾,41 ⁄ 8x4¾, 200–3,000 60–600 GMNUhVW6½x7½,6¾x8,8½x97 ⁄ 8,105 ⁄ 8x11½,105 ⁄ 8x12,10½x12¼,105 ⁄ 8x12¼,12¼x13½

QDS284 S433 65 ⁄ 8x77 ⁄ 8 200–3,000 60–600 GMNUhVW

QDS285 S433 145 ⁄ 8x17 200–3,000 60–600 GMNUhVW

QDMK40 M422 8½x9,105 ⁄ 8x11½ 200–3,000 60–600 GMNUhVW

QDM42 M333 8½x97 ⁄ 8,105 ⁄ 8x12¼ 200–3,000 60–600 GMNUhVW

QDG41 S333 105 ⁄ 8x12¼ 200–3,000 60–600 GMNUhVW

QDG42 S333 12¼x14¾ 200–3,000 60–600 GMNUhVW

QDG43 S333 8½x97 ⁄ 8,137 ⁄ 8x17, 200–3,000 60–600 GMNUhVW14½x17½

QDR41 S333 9½x10¾ 200–3,000 60–600 GMNUhVW

M11 M442 57 ⁄ 8,6½,8½ 400–3,000 60–600 GMNUhVW

M16 M442 5½,57 ⁄ 8,6,61 ⁄ 8,6¼, 400–3,000 60–600 GMNUhVW6½,77 ⁄ 8,83 ⁄ 8,8½,8¾,9¼,9½,97 ⁄ 8,105 ⁄ 8,12¼,14½,14¾,16½

M23 M442 6,61 ⁄ 8,6¼,6½ 400–4,000 60–600 GMNUhVW

M26 M243 3¾ 400–4,000 60–600 GMNUhVW

M28 M432 12¼ 400–4,000 60–600 GMNUhVW

M29 M432 17 400–4,000 60–600 GMNUhVW

M283 M433 6½, 400–4,000 60–600 GMNUhVW

M285 M433 4¾,61 ⁄ 8,6½, 400–4,000 60–600 GMNUhVW

MA29 M422 83 ⁄ 8,8½,105 ⁄ 8,12¼, 400–4,000 60–600 GMNUhVW14¾,16,17

MA291 M422 12 400–4,000 60–600 GMNUhVW

MA31 M432 77 ⁄ 8,83 ⁄ 8,8½,8¾ 400–4,000 60–600 GMNUhVW

MA32 M432 5½,5¾,57 ⁄ 8,6,61 ⁄ 8, 400–4,000 60–600 GMNUhVW6¼,6½,6¾,7½,7¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,9¼,97 ⁄ 8,14¾

MRS285 M433 57 ⁄ 8,6 400–4,000 60–600 GMNUhVW

M34 M433 83 ⁄ 8,8½,12¼,14¾ 400–2,800 60–600 GMNUhVW

M38 M333 5¼,6,77 ⁄ 8,83 ⁄ 8,8½, 400–4,000 60–600 GMNUmVW9,12¼

M381 M333 8½ 400–4,000 60–600 GMNUmVW

M40 M333 57 ⁄ 8,6½,77 ⁄ 8,8½,8¾, 400–4,000 60–600 GMNUmVW97 ⁄ 8,12¼

M41 M333 97 ⁄ 8 400–2,000 60–600 GMNUmVW

MRS41 M333 8½ 400–2,000 60–600 GMNUmVW

M42 M333 77 ⁄ 8,8½,97 ⁄ 8,105 ⁄ 8, 400–2,000 60–600 GMNUmVW12¼

M45 M333 8½,97 ⁄ 8 400–2,000 60–600 GMNUmVW

MDT45 M333 12¼ 400–2,000 60–600 GMNUmVWM56 M233 6¼ 400–2,000 60–600 GMNUmVW

MDT34 M433 8½,12¼ 400–2,800 60–600 DGMNUmVW

MRS34 M433 8½, 400–2,800 60–600 DGMNUmVW

MDT35 M423 83 ⁄ 8,8½,12¼ 400–2,800 60–600 DGMNUmVW

M50 M333 57 ⁄ 8,6,61 ⁄ 8,6¼,6½, 400–2,000 60–600 GMNUmVW6¾,7½,75 ⁄ 8,77 ⁄ 8,83 ⁄ 8,8½,8¾,93 ⁄ 8,9½,97 ⁄ 8,105 ⁄ 8,115 ⁄ 8,12¼,123 ⁄ 5

MA52 M233 61 ⁄ 8 400–2,000 60–600 GMNUmVW

MDT48 M233 6,6½ 400–2,800 60–600 DGMNUmVW

M53 M232 57 ⁄ 8,6,61 ⁄ 8,6½,6¾, 500–3,000 60–600 GMNUmVW7½,83 ⁄ 8,8½,8¾

M58 M231 311 ⁄ 16,3¾,77 ⁄ 8,8½ 500–2,000 60–600 GMNUmVW

MA60 M423 8½,14¾,16 400–2,000 60–600 GMNUmVW

MA61 M423 8½,9¼,12,12¼, 400–2,000 60–600 GMNUmVW14¾,16,17½,18½

M62 M423 8½ 400–2,000 60–600 GMNUmVW

MA62 M423 57 ⁄ 8,6,61 ⁄ 8,6½,75 ⁄ 8, 400–2,000 60–600 GMNUmVW77 ⁄ 8,83 ⁄ 8,8½,8¾,9¼,97 ⁄ 8,105 ⁄ 8,12,121 ⁄ 8,

12¼,14¾,16,17MDT62 M423 12,12¼,16 400–2,800 60–600 DGMNUmVW

MRS62 M423 8½,105 ⁄ 8,12¼ 400–2,000 60–600 DGMNUmVW

M68 M423 12¼,14½,14¾,17½ 500–2,000 60–600 GMNUmVW

M69 M223 77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8, 400–2,000 60–600 GMNUmVW12¼

M70 M323 6,8½,8¾,9½,97 ⁄ 8, 400–2,000 60–600 GMNUmVW11,12¼

M72 M323 77 ⁄ 8,8¾,12¼ 400–2,000 60–600 GMNUmVW

M88 M223 77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8, 400–2,000 60–600 GMNUmVW12,12¼,16,17½

S50 S233 77 ⁄ 8,8½,8¾,12¼,16 500–2,000 60–400 GMNUmVW

S58 S131 3¾ 500–2,000 60–400 GMNUmVW

S71 S223 97 ⁄ 8,12¼,14¾ 500–2,000 60–400 GMNUlVW

S73 S223 8½,8¾,97 ⁄ 8,105 ⁄ 8,11, 500–2,000 60–400 GMNUlVW12¼,16,17,17½


FM2643i/ S233 77 ⁄ 8,8½,8¾,12¼,16 500–2,000 60–400 GMNUmVWFM3643i

FM2762i/ S131 3¾ 500–2,000 60–400 GMNUmVWFM3762i

FM2843i/ S223 97 ⁄ 8,12¼,14¾ 500–2,000 60–400 GMNUlVWFM3843i

SE3641i S223 8½,8¾,97 ⁄ 8,105 ⁄ 8,11, 500–2,000 60–400 GMNUlVW12¼,16,17,17½

Hughes Christensen

HC407 M333 5¾–12¼ 235–2,500 60–350 DGMVW

HC407Z M333 5¾–12¼ 235–2,500 60–350 DGMVW

HCM407 M333 5¾–12¼ 235–2,500 60–350 DGMVW

HCM407Z M333 5¾–12¼ 235–2,500 60–350 DGMVW

HCR407 M333 5¾–12¼ 235–2,500 60–350 DGVW

HCR407Z M333 5¾–12¼ 235–2,500 60–350 DGVW

HC507 M323 5¾ 235–2,500 60–350 DGMVW

HC507Z M323 5¾ 235–2,500 60–350 DGMVW

HCM507 M323 5¾ 235–2,500 60–350 DGMVW

HCM507Z M323 5¾ 235–2,500 60–350 DGMVW

HCR507 M323 5¾ 235–2,500 60–350 DGVW

HCR507Z M323 5¾ 235–2,500 60–350 DGVW

HC607 M323 83 ⁄ 8–17½ 235–2,500 60–350 DGMVW

HC607Z M323 83 ⁄ 8–17½ 235–2,500 60–350 DGMVW

HCM607 M323 83 ⁄ 8–17½ 235–2,500 60–350 DGMVW

HCM607Z M323 83

⁄ 8–17½ 235–2,500 60–350 DGMVWHCR607 M323 83 ⁄ 8–17½ 235–2,500 60–350 DGVW

HCR607Z M323 83 ⁄ 8–17½ 235–2,500 60–350 DGVW

HC408 M433 6–16 235–2,500 60–350 DGMVW

HC408Z M433 6–16 235–2,500 60–350 DGMVW

HCM408 M433 6–16 235–2,500 60–350 DGMVW

HCM408Z M433 6–16 235–2,500 60–350 DGMVW

HCR408 M433 6–16 235–2,500 60–350 DGVW

HCR408Z M433 6–16 235–2,500 60–350 DGVW

HC508 M423 6¼–17½ 235–2,500 60–350 DGMVW

HC508Z M423 6¼–17½ 235–2,500 60–350 DGMVW

HCM508 M423 12¼ 235–2,500 60–350 DGMVW

HCM508Z M423 12¼ 235–2,500 60–350 DGMVW

HCR508 M423 12¼ 235–2,500 60–350 DGVW

HCR508Z M423 12¼ 235–2,500 60–350 DGVW

HC608 M423 12–17½ 235–2,500 60–350 DGMVW

HC608Z M423 12–17½ 235–2,500 60–350 DGMVW

HCM608 M423 12–17½ 235–2,500 60–350 DGMVW

HCM608Z M423 12–17½ 235–2,500 60–350 DGMVW

HCR608 M423 12–17½ 235–2,500 60–350 DGVW

HCR608Z M423 12–17½ 235–2,500 60–350 DGVW

HC309 M443 6 235–2,500 60–350 DGMVW

HC309Z M443 6 235–2,500 60–350 DGMVW

HC409 M423 83 ⁄ 8–12 235–2,500 60–350 DGMVW

HC409Z M423 83 ⁄ 8–12 235–2,500 60–350 DGMVW

HCM409 M423 83 ⁄ 8–12 235–2,500 60–350 DGMVW

HCM409Z M423 83 ⁄ 8–12 235–2,500 60–350 DGMVW

HCR409 M423 83 ⁄ 8–12 235–2,500 60–350 DGVWHCR409Z M423 83 ⁄ 8–12 235–2,500 60–350 DGVW

HC509 M423 77 ⁄ 8,8½ 235–2,500 60–350 DGMVW

HC509Z M423 77 ⁄ 8,8½ 235–2,500 60–350 DGMVW

HCM509 M423 77 ⁄ 8,8½ 235–2,500 60–350 DGMVW

HCM509Z M423 77 ⁄ 8,8½ 235–2,500 60–350 DGMVW

HCR509 M423 77 ⁄ 8,8½ 235–2,500 60–350 DGVW

HCR509Z M423 77 ⁄ 8,8½ 235–2,500 60–350 DGVW

HC609 M423 105 ⁄ 8–16 235–2,500 60–350 DGMVW

HC609Z M423 105 ⁄ 8–16 235–2,500 60–350 DGMVW

HCM609 M423 105 ⁄ 8–16 235–2,500 60–350 DGMVW

HCM609Z M423 105 ⁄ 8–16 235–2,500 60–350 DGMVW

HCR609 M423 105 ⁄ 8–16 235–2,500 60–350 DGVW

HCR609Z M423 105 ⁄ 8–16 235–2,500 60–350 DGVW

NQL (formerly DPI)

CSD+444 S233 6½x7½,105 ⁄ 8x115 ⁄ 8 2,500–2,800 60–200 DGHKMVWBi-center

CSD266 S123 12x14 4,000–4,500 60–200 DGHKMVBi-center

CSD366 S223 12¼x13 4,000–4,500 60–200 DGHKMV

Bi-centerMP29 M433 6,6¼,6½ 200–3,500 60–450 DGHKMV

MP2A M433 6 200–2,000 60–450 DGHKMV

MP39 M443 4¼,61 ⁄ 8,6¼S 200–2,000 60–450 DGHKMV

MP3AM M443 315 ⁄ 32 200–1,500 60–450 DGHKMV

MP3BM M443 3 200–1,000 60–450 DGHKMV

MP47 M333 6,61 ⁄ 8,7½,8½,9½, 200–3,000 60–450 DGHKMV

MP48 M433 61 ⁄ 8,6¼,6¾,67 ⁄ 8,77 ⁄ 8, 200–3,000 60–450 DGHKMV83 ⁄ 8,8½

MP49 M433 57 ⁄ 8,6,61 ⁄ 8,6¼,6½,7.7 200–3,000 60–450 DGHKMV

MP58 M323 8½,8¾ 250–3,000 60–450 DGHKMV

MP5AB M433 6 200–2,000 60–450 DGHKMV

MP66 M323 97 ⁄ 8 250–3,000 60–450 DGHKMV

SP64 S323 12¼,17½ 250–4,500 60–450 DHKMV

SRF+444M S133 105 ⁄ 8x115 ⁄ 8 2,500–4,200 60–200 DGHKMVWBi-center

VMP49 M433 6,8½,12¼ 200–3,500 60–450 RST KV

Precise

S266M S333 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40–1,000 V8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½

S266D S131 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40–1,000 V8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½

S155M S232 37 ⁄ 8,4¾,6,61 ⁄ 8,6¼,6½ 500–4,500 40–1,000 V

M258M M333 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40–1,000 V8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½

M274H M434 77 ⁄ 8,8½,8¾,97 ⁄ 8, 500–4,500 40–1,000 V12¼,13¾


RS163HD M322 8½–13½ 450–3,200 Variable GHWUmRotary

Steerable

DS176H M323 105 ⁄ 8 450–3,200 Variable GHMWUh

DS193 M323 8¾ 450–3,200 Variable GJNMWUh

DS194 M323 12¼ 450–3,200 Variable GHNWUm

DS84 M323 57 ⁄ 8–12¼ 450–3,200 Variable GHMWNUh

DS71 M332 5¾–12¼ 450–3,200 Variable GHMWNUh

DS111H M333 35 ⁄ 8–8¾ 450–3,200 Variable GHMWNUh

DS113H M333 97 ⁄ 8,12¼ 450–3,200 Variable GHMWUh

DS114 M333 8¾ 450–3,200 Variable GHMWUhDS144 M333 97 ⁄ 8 450–3,200 Variable GHMWUh

DS146 M333 61 ⁄ 8–8¾ 450–3,200 Variable GHMWUh





I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e


DS168HD M333 8½ 450–3,200 Variable GHMWUh

DS180 M333 8½,8¾ 450–3,200 Variable GHMWUh


DS66H M333 55 ⁄ 8–97 ⁄ 8 450–3,200 Variable GHMWNUh

RS190D M422 12¼ 450–3,200 Variable GHWUhRotary

steerable

DS173D M423 6¾,8½ 450–3,200 Variable GHMWUh

DS176D M423 105 ⁄ 8 450–3,200 Variable GHMWUh

DS208 M423 14¾ 450–3,200 Variable GNUVW

DS137D M432 12¼ 450–3,200 Variable GHMWUhV

DS143D M432 57 ⁄ 8–6½ 450–3,200 Variable GHMWUh

DS111D M433 6,6¾ 450–3,200 Variable GHMWNUh



DS148D M433 8½ 450–3,200 Variable GHMWUh

DS168D M433 8½,8¾ 450–3,200 Variable GHMWUh

DS227D M433 12¼ 450–3,200 Variable GHMWUhV

RS225D S322 17½,18,18¼ 450–3,200 Variable GHWUhV

DS142 S323 105 ⁄ 8,17½ 450–3,200 Variable GHMWUh

DS70D S323 97 ⁄ 8–17½ 450–3,200 Variable GHMWUh

DS92D S334 12¼,17½ 450–3,200 Variable GHMWUh

DS107D S432 83 ⁄ 8–17½ 400–3,000 Variable GHMWUhV

RockBit

KD5708 S443 6,61 ⁄ 8,6¼,77 ⁄ 8,8½, 500–3,000 60–400 GHMVW

8¾,97 ⁄ 8,12¼KD5813 S443 6,61 ⁄ 8,6¼,77 ⁄ 8,8½, 500–3,000 60–400 GHMVW

8¾,97 ⁄ 8,12¼

KD5913 S443 8½,8¾,97 ⁄ 8,12¼ 500–3,000 60–400 GHMVW

Tri-Max

Q-1H S546 8½–12¼ 1,000–3,500 80–120 MDG

SM-1H S877 4½–12¼ 1,000–3,500 80–120 DG

HZ-90H S977 4½–8½ 1,000–3,500 80–200 HMD


United Diamond

UD513 S615 3¾,37 ⁄ 8,41 ⁄ 8,4¼,4½, 500–4,500 30–600 MGVUm45 ⁄ 8 4¾,5¾,55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,9½,97 ⁄ 8,105 ⁄ 8,12¼,13¾

UD516 S615 61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8, 500–4,500 30–600 MGVUm8½,8¾,12,12¼,14¾

Varel

MKF39 M432 57 ⁄ 8,6,61 ⁄ 8,6¼,6½, 400–2,000 60–1,000 GIMNUhV83 ⁄ 8,8½

MKS36 M332 37 ⁄ 8,41 ⁄ 8,4¾,57 ⁄ 8,6, 500–2,500 60–400 GMW61 ⁄ 8,6¼,6½

MKS37 M432 57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾ 500–2,500 60–400 GMW

MKS50 M433 12,12¼ 400–2,000 60–1,000 GIMNUhV

MKS56 M332 6,61 ⁄ 8,6¼,6½,6½, 500–2,000 60–400 GMW6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,12¼,13¾

MKS57 M432 6,77 ⁄ 8,8½,83 ⁄ 8,8¾, 500–2,000 60–400 GMW97 ⁄ 8,105 ⁄ 8,12¼,13¾

MKS58 M433 57 ⁄ 8,6,61 ⁄ 8,6¼,6½ 400–2,000 60–1,000 GIMNUhV

MKS58 M433 77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8, 400–2,000 60–1,000 GIMNUhV105 ⁄ 8,12¼,13¾

MKS59 M433 77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8, 400–2,000 60–1,000 GIMNUhV105 ⁄ 8,12¼,13¾

MKS59 M433 77 ⁄ 8,8½,83 ⁄ 8,8¾,97 ⁄ 8, 500–2,500 60–400 GMW105 ⁄ 8,12¼,13¾

RD1001 M432 5¾–12¼ 400–2,000 60–500 GHIMUhV

RD1001 RC M432 5¾–12¼ 400–2,000 60–500 GHIMUhV

RD1002 M432 5¾–12¼ 400–2,000 60–500 GHIMUhVSKS50 S433 12 400–2,000 60–1,000 GIMNUhV

VB522M M313 12¼ 250–2,500 60–1,000 DHGMW-KNQUh

VB657M M423 12¼ 250–3,500 60–600 DHGMWKQUh

VB657M M423 12¼ 250–3,500 60–600 GMWKQUh

VB657M M424 12¼ 250–3,500 60–600 Expandable

VB678M M423 12¼ 250–3,500 60–600 Expandable

VB852S S423 16 250–2,500 60–600 Expandable

VB457M M223 57⁄8,6,61 ⁄ 8,6¼ 300–2,000 60–600 DGHMWKQUh

VB880M M333 57⁄8,6,61 ⁄ 8,6¼ 300–2,000 60–1,000 DGHMW-KNQUh

VB650M M323 77 ⁄ 8,83 ⁄ 8,8½,8¾ 250–3,000 60–600 GMWKQUm

VB657S S423 77 ⁄ 8,83 ⁄ 8,8½,8¾ 250–3,000 60–600 GMWKQUl

VB657M M423 77 ⁄ 8,83 ⁄ 8,8½,8¾ 250–3,000 60–600 DHMWKQUh

VB657M M423 77 ⁄ 8,83 ⁄ 8,8½,8¾ 250–3,000 60–600 GMWKQUm

VB657M M423 77 ⁄ 8,83 ⁄ 8,8½,8¾ 250–3,000 60–600 GMWKQUm

VB1280M M433 8½ 250–3,500 60–600 DGHMWKQUh

VB1280M M434 83 ⁄ 8,8½,8¾ 250–3,500 60–600 GMWKQUh

VB1281M M433 83 ⁄ 8,8½,8¾ 250–3,500 60–600 GMWKQUm

VB657M M424 83 ⁄ 8,8½,8¾ 250–3,000 60–600 GMWKQUm

VB1280M M433 83 ⁄ 8,8½,8¾ 250–3,500 60–600 GMWKQUm

VB622S S313 97 ⁄ 8 200–3,000 60–600 DHGMW-KNQUh


MBC37 M233 3¾x41 ⁄ 8 200–1,700 60–400 GMWBi-centerMBC39 M233 6x7,6½x7½ 200–1,700 60–400 GMWBi-center




12¼x14¾

PDC coring bits

Baker Hughes INTEQ

ARC325 NA 55 ⁄ 8–8½ 2,750–3,800 50–500 Low Inv VGMF

ARC425 M354 4¾–12¼ 400–2,500 50–500 Low Inv VGMF

ARC427 M355 4¾–12¼ 500–3,000 50–500 Low Inv VGMF

RC478 M565 4¾–12¼ 500–3,000 60–500 Round

Bit-Tech

CP-440BU M342 6,61 ⁄ 8 300–2,000 50–500 AFGMVW

CP-440BU M232 77 ⁄ 8,8½,8¾ 300–2,000 50–500 AFGMVW

CP-440P M342 77 ⁄ 8,8½,8¾ 300–2,000 60–120 AFG

CP-B66 M232 61 ⁄ 8 300–2,000 50–500 AFGMVWHalliburton Security DBS

FC3043 M433 8½–12¼ 250–3,500 50–150 F

FC3743/ M432 53 ⁄ 8–12¼ 250–3,500 50–150 FFC3743i

FC3843 M433 6½–12¼ 250–3,500 50–150 F

FC3943/ M433 8½ 250–3,500 50–150 FFC3943i

FCi3843 M343 8½–12¼ 250–3,500 50–150 F

FC3843i M343 8½–12¼ 250–3,500 50–150 F

FC3844/ M343 8½–12¼ 250–3,500 50–150 FFC3844i

FC3847/ M344 8½–12¼ 250–3,500 50–150 FFC3847i


Bit-Tech

DN-424G M812 1¾,17 ⁄ 8,21 ⁄ 8,2¼,27 ⁄ 16, 300–3,500 60–600 ADGHMNR35 ⁄ 8,4½,4¾,61 ⁄ 8,6¼,6½,6¾

DG-420PG M622 1¾,17 ⁄ 8,21 ⁄ 8,2¼,27 ⁄ 16, 300–3,500 60–600 ADGHIMR

35

⁄ 8

,4½,4¾,61

⁄ 8

,6¼,6½,6¾

DN-304G M813 4½–4¾,5½–6½ Variable Variable Custom

DN-334G M813 4½–4¾,5½–6¾ Variable Variable Custom

GeoDiamond

D62 M613 57 ⁄ 8,6,61 ⁄ 8,6½,83 ⁄ 8,8½ 200–5,000 80–500 MNKNUh

D71 M613 37 ⁄ 8,41 ⁄ 8,4¼,43 ⁄ 8,4½, 800–4,000 80–500 MNRNUh45 ⁄ 8,4¾,55 ⁄ 8,5¾,57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

D72 M613 3¾,37 ⁄ 8,41 ⁄ 8,4½,45 ⁄ 8, 800–4,000 80–500 MNKNUh4¾,5½,5¾,57 ⁄ 8,6,61 ⁄ 8,6½,7½,77 ⁄ 8,83 ⁄ 8,8½,12,12¼

XTG49 M613 83 ⁄ 8–8½ 800–4,000 80–500 MNKNUh


Ti3085D M842 57 ⁄ 8–8½ 300–3,000 80–1,200 MNRImpregnated

Ti3085S M842 57 ⁄ 8–8½ 300–3,000 80–1,200 MNRImpregnated

Ti3105D M842 83

⁄ 8–9½ 300–3,000 80–1,200 MNRImpregnated


TT521 M622 57 ⁄ 8–12¼ 300–3,000 80–1,000 IMN

TT561 M624 41 ⁄ 8–12¼ 300–3,000 80–1,000 IMN

Varel

DK320 M631 5¾–12¼ 400–2,500 60–500 DGHIMUh

DK320 RC M631 5¾–12¼ 400–2,500 60–500 DGHIMUh

H200 M613 41 ⁄ 8–12¼ 400–2,500 60–1,000 GMNUh

M311 M734 83 ⁄ 8–12¼ 400–2,500 60–1,000 GIMNUm

M320 M624 41 ⁄ 8–12¼ 400–2,500 60–1,000 GIMNUm

M320 RC M624 41 ⁄ 8–12¼ 400–2,500 60–1,000 GIMNUh


Baker Hughes INTEQ

SC226 T5X8 4¾–12¼ 500–3,000 80–500 Dbl Cone K

SC278 T2X9 4¾–12¼ 750–3,500 80–500 Round K

SC777 TSR8 4¾–12¼ 500–2,500 80–500 Round R

SC279 DSR0 4¾–12¼ 500–2,500 80–500 Round R

SC281 NA 4¾–12¼ 500–2,500 80–500 Round R

Bit-TechCN-424BL M842 61 ⁄ 8,6¾ 400–2,500 50–500 AGMR

CN-404RS M812 61 ⁄ 8,77 ⁄ 8,8½,8¾ 400–2,500 50–500 AGKM

CG-300PG M623 6,61 ⁄ 8,6¼,77 ⁄ 8,8¾ 400–2,500 50–500 AGIKM

CN-404G M612 6,61 ⁄ 8,6¼,77 ⁄ 8,8¾ 400–2,500 50–500 AGKM

CN-334G M813 61 ⁄ 8,63 ⁄ 16,6¼,77 ⁄ 8,8¾ 400–2,500 50–500 AGRM


Ci3156S M843 7½–8½ 250–3,500 50–70 F ImpregnatedCT 103 M623 6–12¼ 250–3,500 110–150 I

CT 303 M623 6–12¼ 250–3,500 110–150 I

CT 313 M623 6–12¼ 250–3,500 110–150 W

CT 403 M624 6–12¼ 250–3,500 110–150 I

CT 93 M623 6–12¼ 250–3,500 110–150 I

Varel

C200 M613 57 ⁄ 8–12¼ 100–2,000 60–120 GKUh

C200 DF M613 57 ⁄ 8–12¼ 100–2,000 60–120 GFKUh

C300 M713 57 ⁄ 8–12¼ 100–2,000 60–120 GKUh

C300 DF M713 57 ⁄ 8–12¼ 100–2,000 60–120 GFKUh

C310 M734 57 ⁄ 8–12¼ 100–2,000 60–120 GIUh

C320 M623 57 ⁄ 8–12¼ 100–2,000 60–120 GIUh

C320 RC M623 57 ⁄ 8–12¼ 100–2,000 60–120 GIUh

HardSteel tooth roller cone bits

TIX

H 321 3,37 ⁄ 8,4,4½ 1,500–2,500 40–60

H 321 4¾ 1,500–3,000 40–60

H 321 55

⁄ 8

,57

⁄ 8

,6,6¼,6¾, 2,500–5,000 40–807½,75 ⁄ 8,77 ⁄ 8

H 321 8½,85 ⁄ 8,9½,95 ⁄ 8,97 ⁄ 8, 3,000–6,000 40–80105 ⁄ 8,11,12¼

H 321 133 ⁄ 8,14¾,15,15½, 3,000–5,000 40–8017½,20,22,24

H-X 326 57 ⁄ 8,6 3,000–5,000 40–70 B

H-X 326 8½,12¼ 3,000–6,000 40–70 B

HS 311 6,61 ⁄ 8,7½,75 ⁄ 8,77 ⁄ 8 2,500–5,000 40–80

HS 311 8½,9½,95 ⁄ 8,97 ⁄ 8, 3,000–6,000 40–80105 ⁄ 8,12¼

HS 311 14¾,15,15½,17½, 3,000–5,000 40–8020,22,24

HS-X 316 57 ⁄ 8,6 3,000–5,000 40–70 B

HS-X 316 8½,12¼ 3,000–6,000 40–70 B

HS-TX 317 57 ⁄ 8,6 3,000–5,000 40–70 BG

HS-TX 317 8½,12¼ 3,000–6,000 40–70 BG

HS-TZ 315 8½,12¼ 3,000–6,000 40–70 G

HS-TZ 315 17½ 3,000–5,000 40–70 G

HS-Z 314 8½,12¼ 3,000–6,000 40–70

HS-TXZ 315 12¼,17½ 3,000–6,000 40–100

HS-XZ 314 12¼,17½ 3,000–6,000 40–100H-Z 324 8½,12¼ 3,000–6,000 40–70

H-XZ 324 12¼,17½ 3,000–6,000 40–100

HR 341 8½,12¼ 3,000–6,000 40–70

HR-X 346 8½,12¼ 3,000–6,000 40–70 B

HR-Z 344 8½,12¼ 3,000–6,000 40–70

Tri-Max

TM311 311 6–8½ 2,000–5,000 60–100

TM315 315 6–97 ⁄ 8 2,000–5,000 60–100

TM316 316 6–97 ⁄ 8 2,000–5,000 60–100

TM317 317 6–97 ⁄ 8 2,000–5,000 60–100

Varel

L1 311S 37 ⁄ 8,4¾,61 ⁄ 8 3,500–7,000 40–80 S

LH1 321S 27 ⁄ 8,215 ⁄ 16,3,3¼,3¾, 4,000–8,000 40–80 S37 ⁄ 8,4,41 ⁄ 8,4¼,4½,4¾,47 ⁄ 8,5,51 ⁄ 8,55 ⁄ 8,57 ⁄ 8,61 ⁄ 8,105 ⁄ 8,15



EBXS(D)71, 717 4¾,57 ⁄ 8,6,61 ⁄ 8, 4,000–7,500 35–140 BW

73,75 6¼,6½,6¾,77

⁄ 8,8½,8¾,97 ⁄ 8,105 ⁄ 8,12¼

EBXS(D)77, 737 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 4,000–7,500 35–140 BW79,81 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

EBXS(D)83, 747 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 4,000–7,500 35–140 BW85,87,89 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

EBXS(D)91, 817 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 4,500–7,500 30–120 BW93 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

EBXS(D)95, 827 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 4,500–7,500 30–120 BW97 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

EBXS(D)99 837 8¾ 4,500–7,500 30–120 BW

EBXT(D)71, 715 13½,14¾,16,17½, 4,000–7,500 35–140 BW73,75 20,22,24,26,28

EBXT(D)77, 735 13½,14¾,16,17½, 4,000–7,500 35–140 BW79,81 20,22,24,26,28

EBXT(D)83, 745 13½,14¾,16,17½, 4,000–7,500 35–140 BW85,87,89 20,22,24,26,28

EBXT(D)91, 815 13½,14¾,16,17½, 4,500–7,500 30–120 BW93 20,22,24,26,28





I A D C c o d e



l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e


EBXT(D)95, 825 13½,14¾,16,17½, 4,500–7,500 30–120 BW97 20,22,24,26,28

EBXT(D)99 835 13½,14¾,16,17½, 4,500–7,500 30–120 BW20,22,24,26,28

XS(D)71,73, 717 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 4,000–7,500 35–140 BW75 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

XS(D)77,79, 737 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 4,000–7,500 35–140 BW81 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

XS(D)83,85, 747 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 4,000–7,500 35–140 BW87,89 6½,6¾,77 ⁄ 8,8½,8¾,

97 ⁄ 8,105 ⁄ 8,12¼

XS(D)91,93 817 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 4,500–7,500 30–120 BW6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,105 ⁄ 8,12¼

XS(D)95,97 827 4¾,57 ⁄ 8,6,61 ⁄ 8,6¼, 4,500–7,500 30–120 BW6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,105 ⁄ 8,12¼

XS(D)99 837 77 ⁄ 8,8½,8¾ 4,500–7,500 30–120 BW

XT(D)71,73, 715 13½,14¾,16,17½, 4,000–7,500 35–140 BW75 20,22,24,26,28

XT(D)77,79, 735 13½,14¾,16,17½, 4,000–7,500 35–140 BW81 20,22,24,26,28

XT(D)83,85, 745 13½,14¾,16,17½, 4,000–7,500 35–140 BW87,89 20,22,24,26,28

XT(D)91,93 815 13½,14¾,16,17½, 4,500–7,500 30–120 BW20,22,24,26,28

XT(D)95,97 825 13½,14¾,16,17½, 4,500–7,500 30–120 BW20,22,24,26,28

XT(D)99 835 13½,14¾,16,17½, 4,500–7,500 30–120 BW20,22,24,26,28

Hughes Christensen

STX-70 737 4¾,6½ 2,000–5,000 40–80 GW

STX-77 737 4½,6½ 2,000–5,000 40–80 GW

STX-88 837 61 ⁄ 8 2,000–5,000 40–80 GW

STX-90 837 41 ⁄ 8 2,000–5,000 40–80 GW

STX-99 837 61 ⁄ 8,6½ 2,000–5,000 40–80 GW

HR-88 817 77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8 3,000–7,000 50–90 GW

HR-99 837 77 ⁄ 8,8½,8¾,12¼ 3,000–7,000 50–90 GW

RBI-Gearhart

W67LRGSP 717Y 77 ⁄ 8,8½,8¾,12¼ 3,000–6,500 35–70 ACEGHLMT

C7 737Y 37 ⁄ 8,41 ⁄ 8 4¾,55 ⁄ 8,5½, 3,000–6,500 35–70 ACEGHLM57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C7LRGSP 737Y 37

⁄ 8

,41

⁄ 8

,4¾,55

⁄ 8

,57

⁄ 8

, 3,000–6,500 35–70 ACEGHM6,61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C75 737Y 77 ⁄ 8,12¼ 3,000–6,500 35–70 ACEGHLM

C75LRGRSP 737Y 77 ⁄ 8,12¼ 3,000–6,500 35–70 ACEGHM

B7LRGSP 737Y 41 ⁄ 8,4¾,57 ⁄ 8,6,61 ⁄ 8, 3,000–6,500 35–180 AGHLM6¼,6½


HP73 737 83 ⁄ 8,8½ 3,500–6,500 40–70 Y

SL73KPR 737 4¾,5½,61 ⁄ 8,6½ 3,500–6,500 40–70 Y

HP74 747 77 ⁄ 8,8½,8¾,97 ⁄ 8 3,500–6,500 40–70 Y

TD74 747 77 ⁄ 8,8½,8¾ 3,500–6,500 40–70 Z

Smith

F7 737Y 77 ⁄ 8,8½,8¾ 4,000–7,000 50–110 Y

F7OD 737Y 77 ⁄ 8,8½,8¾ 4,000–7,000 50–110 WY

MF7OD 737Y 4¾ 3,000–6,000 50–250 HMWY

XR68Y 737Y 61 ⁄ 8,6½ 2,000–6,000 40–270 HMY

XR68YD 737Y 61 ⁄ 8 2,000–6,000 40–270 HMWY

XR68YOD 737Y 61 ⁄ 8,6½ 2,000–6,000 40–270 HMWY

XR70HYOD 737Y 61 ⁄ 8 2,000–6,000 40–270 HMWY

XR70Y 737Y 6,61 ⁄ 8,6½,6¾ 2,000–6,000 40–270 HMY

XR70YOD 737Y 57 ⁄ 8,6,61 ⁄ 8,6½,6¾ 2,000–6,000 40–270 HMWY

TIX

X70G 737Y 55 ⁄ 8,57 ⁄ 8,75 ⁄ 8 3,000–5,000 40–60 GY

X70G 737Y 8½,12¼ 3,000–6,500 40–60 GY

Tri-Max

TM632 632 6–12¼ 2,000–5,000 60–100

TM635 635 6–12¼ 2,000–5,000 60–100

TM637 637 6–12¼ 2,000–5,000 60–100

TM732 732 4½–12¼ 2,000–5,000 60–100

TM737 737 4½–12¼ 2,000–5,000 60–100

PDC drill bits

Bit-Tech

HP-440BP M342 3½,35 ⁄ 8,3¾,37 ⁄ 8,4, 200–3,000 60–300 ADFGHMNVW41 ⁄ 8,4¼,4,43 ⁄ 8,4½,45 ⁄ 8,4¾,57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾

HP440B13P M232 6,61 ⁄ 8,6¼,6½,6¾ 200–3,000 60–300 ADGHMVW

DP440B2UP M242 77 ⁄ 8,8½,8¾ 400–3,000 60–300 ADGMVW

Dowdco

DT6R M713 4¾–8¾ 200–4,000 60–500 GHMK

DP9X M812 4¾–8¾ 200–4,000 60–500 GHMK

GeoDiamond

QDS22 S422 4¾x5,57 ⁄ 8x6½,6x7, 200–3,000 60–600 GMNUhVW8½x97 ⁄ 8

QDM22 M422 5½x6,6x7 200–3,000 60–600 GMNUhVW

QDM25 M422 41 ⁄ 8x4¾, 200–3,000 60–600 GMNUhVW

QDM27 M422 2¾x3,3¾x41 ⁄ 8 200–3,000 60–600 GMNUhVW

QDG23 S422 5¾x6½,57 ⁄ 8x6½ 200–3,000 60–600 GMNUhVW

M09 M442 3,3¼,33 ⁄ 8,3½,311 ⁄ 16, 200 –3,000 60–900 GMNUhVW3¾,37 ⁄ 8,41 ⁄ 8,43 ⁄ 8,4½,4¾,51 ⁄ 8,5¼,5½,5¾,57 ⁄ 8,6,61 ⁄ 8,63 ⁄ 8,6½,6¾,77 ⁄ 8,8½,97 ⁄ 8,12¼

M13 M442 41 ⁄ 8 200–3,000 60–900 GMNUhVW

M16 M442 5½,55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8, 400–2,000 60–900 GMNUhVW6¼,6½,77 ⁄ 8,83 ⁄ 8,8½,8¾,9¼,97 ⁄ 8,105 ⁄ 8,12¼,14½,14¾,16½

M18 M442 5¾,57 ⁄ 8,6,83 ⁄ 8,8½ 400–2,000 60–900 GMNUhHVW

M20 M442 41 ⁄ 8,4½,45 ⁄ 8,4¾,55 ⁄ 8, 400 –2,000 60–900 GMNUhHVW6,61 ⁄ 8,6¼,6½,6¾

M27 M432 3¾ 400–4,000 60–600 GMNUhVW

MA29 M422 8½,83 ⁄ 8,105 ⁄ 8,12¼, 400–4,000 60–600 GMNUhVW14¾,16,17

MA31 M432 77 ⁄ 8,83 ⁄ 8,8½,8¾ 400–4,000 60–600 GMNUhVW

MA32 M432 5½,5¾,57 ⁄ 8,6,61 ⁄ 8, 400–4,000 60–600 GMNUhVW6¼,6½,6¾,7½,7¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,9¼,97 ⁄ 8,14¾

M33 M432 55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼, 400–2,000 60–900 GMNUhVW6½,77 ⁄ 8,83 ⁄ 8,8½,12,12¼,13½,14¾,16,17,17½

M34 M433 83 ⁄ 8,8½,12¼,14¾ 400–2,000 60–900 GMNUhVW

M35 M433 14¾ 400–3,000 60–900 GMNUhVW

M36 M433 83 ⁄ 8,8½,12,12¼,14½ 400–2,000 80–900 GMNUhVW

M37 M433 77 ⁄ 8,83 ⁄ 8,8¾,9½,97 ⁄ 8, 400–2,000 80–900 GMNUhVW12¼

M39 M333 77 ⁄ 8,8½,8¾ 400–2,000 80–900 GMNUhVW

S21 S442 8½,8¾,97 ⁄ 8,105 ⁄ 8, 500–2,000 60–400 GMNUhVW12¼,14½

S38 S222 12¼ 500–2,000 60–400 GMNUhVW


FM2821/ M442 57 ⁄ 8,6,61 ⁄ 8,6½,77 ⁄ 8 500–2,500 60–450 MVWFM3821

FM2831/ M442 6,61 ⁄ 8,6½,6¾,12¼ 500–2,000 60–400 MVWFM3831

FM2841i/ M433 83

⁄ 8

–8½ 500–3,000 100–400 MVWFM3841i

FM2843i/ M433 83 ⁄ 8–8½ 500–3,000 100–400 MVWFM3843i

FM2845i/ M433 83 ⁄ 8–8½ 500–3,000 100–400 MVWFM3845i

FM2921/ M443 56 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6½, 300–3,000 60–400 MVWFM3921 6¾,8½,12¼

FM2931/ M442 97 ⁄ 8 500–2,000 60–400 MVWFM3931

FM2933/ M443 8½ 500–2,000 60–400 MVWFM3933

FM2941/ M432 8½ 500–2,500 60–450 MVWFM3941

FM2941i/ M433 83 ⁄ 8–8½ 500–3,000 100–400 MVWFM3941i

FM2943i/ M433 83 ⁄ 8–8½ 500–3,000 100–400 MVWFM3943i

FM2945i/ M433 12¼–17½ 500–3,500 100–400 MVWFM3945i

SE3841i M333 83 ⁄ 8–8½ 500–3,000 100–400 DMVW

Hughes ChristensenHC309 M443 6 235–2,500 50–350 GHMW

HC309Z M443 6 235–2,500 50–350 GHMW

HC409 M433 83 ⁄ 8–12 235–2,500 50–350 GHMW

HC409Z M433 83 ⁄ 8–12 235–2,500 50–350 GHMW

HCM409 M433 83 ⁄ 8–12 235–2,500 50–350 GHMW

HCM409Z M433 83 ⁄ 8–12 235–2,500 50–350 GHMW

HCR409 M433 83 ⁄ 8–12 235–2,500 50–350 GHMW

HCR409Z M433 83 ⁄ 8–12 235–2,500 50–350 GHMW

HC509 M423 77 ⁄ 8,8½ 235–2,500 50–350 GHMW

HC509Z M423 77 ⁄ 8,8½ 235–2,500 50–350 GHMW

HCM509 M423 77 ⁄ 8,8½ 235–2,500 50–350 GHMW

HCM509Z M423 77 ⁄ 8,8½ 235–2,500 50–350 GHMW

HCR509 M423 77 ⁄ 8,8½ 235–2,500 50–350 GHMW

HCR509Z M423 77 ⁄ 8,8½ 235–2,500 50–350 GHMW

HC609 M423 105 ⁄ 8–16 235–2,500 50–350 GHMW

HC609Z M423 105 ⁄ 8–16 235–2,500 50–350 GHMW

HCM609 M423 105 ⁄ 8–16 235–2,500 50–350 GHMW

HCM609Z M423 105 ⁄ 8–16 235–2,500 50–350 GHMW

HCR609 M423 105 ⁄ 8–16 235–2,500 50–350 GHMW

HCR609Z M423 105 ⁄ 8–16 235–2,500 50–350 GHMW

HC410 M433 12 235–2,500 50–350 GHMW

HC410Z M433 12 235–2,500 50–350 GHMW

HCM410 M433 12 235–2,500 50–350 GHMW

HCM410Z M433 12 235–2,500 50–350 GHMW

HCR410 M433 12 235–2,500 50–350 GHMW

HCR410Z M433 12 235–2,500 50–350 GHMW

HC510 M423 14¾ 235–2,500 50–350 GHMW

HC510Z M423 14¾ 235–2,500 50–350 GHMW

HCM510 M423 14¾ 235–2,500 50–350 GHMW

HCM510Z M423 14¾ 235–2,500 50–350 GHMW

HCR510 M423 14¾ 235–2,500 50–350 GHMW

HCR510Z M423 14¾ 235–2,500 50–350 GHMW

HC610 M423 14¾,17½ 235–2,500 50–350 GHMW

HC610Z M423 14¾,17½ 235–2,500 50–350 GHMW

HCM610 M423 14¾,17½ 235–2,500 50–350 GHMW

HCM610Z M423 14¾,17½ 235–2,500 50–350 GHMW

HCR610 M423 14¾,17½ 235–2,500 50–350 GHMW

HCR610Z M423 14¾,17½ 235–2,500 50–350 GHMW

HC512 M423 77 ⁄ 8 235–2,500 50–350 GHMW

HC512Z M423 77 ⁄ 8 235–2,500 50–350 GHMW

HC612 M423 8½ 235–2,500 50–350 GHMW

HC612Z M423 8½ 235–2,500 50–350 GHMW

PDC-Gearhart

MS1388 M431 77 ⁄ 8,8¾,97 ⁄ 8,11,12¼ 300–3,000 60–250 GHWUhM

MS1697 M442 77 ⁄ 8,8¾,97 ⁄ 8,12¼ 300–3,000 60–250 GHWUhM

MS1184 M442 77 ⁄ 8,8½,8¾ 300–3,000 60–300 GHWUhM

MS9584 M442 4¾,61 ⁄ 8,6½,77 ⁄ 8,8½, 300–3,000 60–300 GHWUhM

8¾Precise

S266M S333 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40-1,000 V8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½

S266D S131 6,61 ⁄ 8,6¼,6½,77 ⁄ 8, 500–4,500 40–1,000 V8½,8¾,97 ⁄ 8,12¼,13¾,14¾,17½

M274H M434 77 ⁄ 8,8½,8¾,97 ⁄ 8, 500–4,500 40–1,000 V12¼,13¾

S2912H S434 77 ⁄ 8,8½,8¾,97 ⁄ 8, 500–4,500 40–1,000 V12¼,13¾


DS169 M433 14¾ 450–3,200 Variable GHMWNUh

DS171H M433 8½ 450–3,200 Variable GHMWNUh

DS175D M433 12¼ 450–3,200 Variable GHMWNUh

DS201 M433 12 450–3,200 Variable GHMWNUh

DS207 M433 5½ 450–3,200 Variable GHMWNUh

DS66D M433 83 ⁄ 8–12¼ 450–3,200 Variable GHMWNUh

DS72 M433 57 ⁄ 8–8½ 450–3,200 Variable GHMWNUh

DS94D M433 77

⁄ 8

–16 450–3,200 Variable GHMWUhRS165D M433 83 ⁄ 8,8½ 450–3,200 Variable GHMWNUhRotary

steerable

RockBit

KD5808 S443 6,61 ⁄ 8,6¼,77 ⁄ 8,8½, 500–3,000 60–400 GHMVW8¾,97 ⁄ 8,12¼

KD5908 S443 6,61 ⁄ 8,6¼,77 ⁄ 8,8½, 500–3,000 60–400 GHMVW8¾,97 ⁄ 8,12¼

Tri-Max


United Diamond

UD513 S615 3¾,37 ⁄ 8,41 ⁄ 8,4¼,4½, 500–4,500 30–600 MGVUm45 ⁄ 8 4¾,5¾,55 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼,6½,6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,9½,97 ⁄ 8,105 ⁄ 8,12¼,13¾

Varel

MKS30 M433 12,12¼ 400–2,000 60–1,000 GIMNUhVMKS32 M433 8¾ 400–2,000 60–1,000 GIMNUhV

MKS38 M432 57 ⁄ 8,6,61 ⁄ 8,6¼,6½,8½ 400–2,000 60–1,000 GIMNUhV

MKS39 M432 12¼ 400–2,000 60–1,000 GIMNUhV

MKS39 M432 6,61 ⁄ 8,6½,77 ⁄ 8,83 ⁄ 8, 400–2,000 60–1,000 GIMNUhV8½,8¾,12,12¼

PDC coring bits

Baker Hughes INTEQ

ARC427 M355 4¾–12¼ 500–3,000 50–500 Low Inv VGMF

RC478 M565 4¾–12¼ 500–3,000 60–500 Round

Bit-Tech

CP-440BUP M242 6,61 ⁄ 8 300–2,000 50–300 AFGMVW

CP-440BUP M232 77 ⁄ 8,8½,8¾ 300–2,000 50–300 AFGMVW


FC3743/ M343 8½–12¼ 250–3,500 50–150 FFC3743i

FC3843/ M343 8½–12¼ 250–3,500 50–150 FFC3843i

FC3844/ M344 8½–12¼ 250–3,500 50–150 FFC3844i

FC3847/ M345 8½–12¼ 250–3,500 50–150 FFC3847i





I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e



I A D C c o d e

S i z e r a n g e ,

i n .


l b / i n .

d i a m e t e r


s p e e d ,

r p m


u s a g e

FC3943/ M346 8½–12¼ 250–3,500 50–150 FFC3943i


Bit-Tech

DN-424P M812 1¾,17

⁄ 8,21

⁄ 8,2¼,27

⁄ 16, 1,000–3,000 60–1,000 ADGHMNR35 ⁄ 8,4½,4¾,61 ⁄ 8,6¼,6½,6¾

DN-304P M813 4½–4¾,5½–6½ 1,000–3,000 60–1,000 Custom

GeoDiamond

DST12 M711 37 ⁄ 8,41 ⁄ 8,4½,4¾,57 ⁄ 8, 800–4,000 80–500 DMNKNUh6,61 ⁄ 8,6¼,6½,65 ⁄ 8,6¾,77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8,105 ⁄ 8,12¼

D54 M713 4½,45 ⁄ 8,4¾,5¾,6, 800–4,000 80–500 MNKNUh61 ⁄ 8,6½

XTG46 M843 4¾,57 ⁄ 8,6½,8¾,9½ 350–3,500 100–1,200 MNGUhHK

XTG48 M843 3¾,41 ⁄ 8,4½,5¼,55 ⁄ 8, 350–3,500 100–1,200 MNGUhHK5¾,57 ⁄ 8,6,61 ⁄ 8,6½,77 ⁄ 8,83 ⁄ 8,8½,8¾,105 ⁄ 8,12¼,16

XTGD48 M843 57 ⁄ 8,6,83 ⁄ 8,8½,16 350–3,500 100–1,200 MNGUhHK

XTGE48 M843 8½x85 ⁄ 8 350–3,500 100–1,200 MNGUhHK


TB16 M713 6½,12½ 300–3,000 80–1,000 MN

TBT17 M634 57 ⁄ 8,8½ 300–3,000 80–1,000 IMN

TBT703 M734 57 ⁄ 8,6,8½ 300–3,000 80–1,000 IMNTi3085C M842 57 ⁄ 8–8½ 300–3,000 80–1,200 MNR

Impregnated



Ti3105C M842 83 ⁄ 8–9½ 300–3,000 80–1,200 MNRImpregnated



Ti3125C M842 105 ⁄ 8–12¼ 300–3,000 80–1,200 MNRImpregnated


TT593 M724 3½,3¾ 300–3,000 80–1,000 IMN

Varel

DK300 M711 5¾–12¼ 500–3,000 60–500 DGMUh

H300 M713 41 ⁄ 8–8½ 500–2,500 60–1,000 GMNUh

H400 M712 41 ⁄ 8–8½ 500–3,500 60–1,000 GMNUhK300 M711 5¾–12¼ 500–3,000 60–500 GMUh


Baker Hughes INTEQ

C23 D5X9 4¾x12¼ 500–3,500 60–500 Round

SC278 T2X9 4¾–12¼ 750–3,500 60–500 Round K

SC777 TSR8 41 ⁄ 8–97 ⁄ 8 500–2,500 60–500 Round R

Bit-Tech

CN-424BLP M842 61 ⁄ 8,6¾ 750–2,500 60–120 AGMR

CN-404RSP M812 61 ⁄ 8,77 ⁄ 8,8½,8¾ 750–2,500 60–120 AGKM

CN-404P M812 6,61 ⁄ 8,77 ⁄ 8,8¾ 750–2,500 60–120 AGKM


Ci3156C M843 7½–8½ 250–3,500 50–70 FImpregnated

Ci3156S M843 7½–8½ 250–3,500 50–70 FImpregnated

Ci3124C M844 6–8½ 250–3,500 50–70 FImpregnated

Varel

C400 M712 57 ⁄ 8–8½ 100–2,000 60–120 GKUh

C500 M812 57 ⁄ 8–8½ 100–3,000 60–120 GKUh

Extremely HardSteel tooth roller cone bits

Tri-Max

TM321 321 6–17½ 2,000–5,000 60–85 DG



EBXS(D)91,93 817 77 ⁄ 8,97 ⁄ 8 4,000–7,500 40–55 B

EBXS(D)95,97 837 57 ⁄ 8,8½,8¾,9,97 ⁄ 8,11, 4,500–7,500 30–50 BY12¼,13¾

EBXS(D)99 835 8¾ 4,000–7,000 40–55 Y

XS(D)91,93 817 77 ⁄ 8,97 ⁄ 8 4,000–7,500 40–55 B

XS(D)95,97 837 57 ⁄ 8,8½,8¾,9,97 ⁄ 8, 4,500–7,500 30–50 BY11,12¼,13¾

XS(D)99 835 17½ 4,000–7,000 40–55 Y

Hughes Christensen

STX-70 737 4¾,6½ 2,000–5,000 40–80 GW

STX-77 737 4½,6½ 2,000–5,000 40–80 GW

STX-88 837 61 ⁄ 8 2,000–5,000 40–80 GW

STX-90 837 41 ⁄ 8 2,000–5,000 40–80 GW

STX-99 837 61 ⁄ 8,6½ 2,000–5,000 40–80 GW

HR-88 817 77 ⁄ 8,83 ⁄ 8,8½,8¾,97 ⁄ 8 3,000–7,000 50–90 GW

HR-99 837 77 ⁄ 8,8½,8¾,12¼ 3,000–7,000 50–90 GW

RBI-Gearhart

C8 817Y 4¾,57 ⁄ 8,6,6¾,77 ⁄ 8,97 ⁄ 8 3,000–6,500 35–70 ACEGHLM

C8LRGSP 817Y 4¾,5

7

⁄ 8

,6,6¾,7

7

⁄ 8

,9

7

⁄ 8

3,000–6,500 35–70 ACEGHMW8LRGSP 817Y 6¾,77 ⁄ 8,8¾,97 ⁄ 8,12¼ 3,000–6,500 35–70 ACEGHM

C9 837Y 41 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–6,500 35–70 ACEGHLM6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

C9LRGSP 837Y 41 ⁄ 8,57 ⁄ 8,6,61 ⁄ 8,6¼, 3,000–6,500 35–70 ACEGHM6½,6¾,77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼

W9LRGSP 837Y 6¼,6½,77 ⁄ 8,8¾,97 ⁄ 8, 3,000–6,500 35–70 ACEGHM12¼


HP81 817 77 ⁄ 8 3,500–6,500 35–60 Y

TD81 817 8¾ 3,500–6,500 35–60 Y

HP83 837 77 ⁄ 8,8½,8¾,97 ⁄ 8,105 ⁄ 8 3,500–6,500 35–60 Y

SL83 837 57 ⁄ 8,6,61 ⁄ 8,6½ 3,500–6,500 35–60 Y

TD83 837 8½,8¾,12¼ 3,500–6,500 35–60 Y

Smith

F8 817Y 77 ⁄ 8,8¾ 4,000–7,000 50–110 Y

F80Y 817Y 77 ⁄ 8,8½,8¾,97 ⁄ 8 4,000–7,000 50–110 Y

F80YOD 817Y 77 ⁄ 8,8½,8¾,97 ⁄ 8 4,000–7,000 50–110 WY

F80YODV 817Y 77 ⁄ 8 4,000–7,000 50–110 WY

F80YV 817Y 77 ⁄ 8 4,000–7,000 50–110 YF85Y 837Y 8¾ 4,000–7,000 50–110 Y

F85YOD 837Y 8¾ 4,000–7,000 50–110 WY

F85YODV 837Y 8¾ 4,000–7,000 50–110 WY

F85YV 837Y 8¾ 4,000–7,000 50–110 Y

F8OD 817Y 77 ⁄ 8,8¾,97 ⁄ 8,12¼, 4,000–7,000 50–110 WY14¾

F9 837Y 77 ⁄ 8,8½,8¾ 4,000–7,000 50–110 Y

F90Y 837Y 8¾ 4,000–7,000 50–110 Y

F90YOD 837Y 77 ⁄ 8,8½,8¾ 4,000–7,000 50–110 WY

F90YODV 837Y 77 ⁄ 8,8½,8¾ 4,000–7,000 50–110 WY

F90YV 837Y 8¾ 4,000–7,000 50–110 Y

F9OD 837Y 77 ⁄ 8,8½,8¾,97 ⁄ 8 4,000–7,000 50–110 WY

XR90Y 837Y 61 ⁄ 8,6½ 2,000–6,000 40–270 HMY

XR90YDOD 837Y 6½ 2,000–6,000 40–270 HMWY

XR90YOD 837Y 61 ⁄ 8,6½ 2,000–6,000 40–270 HMWY

TIX

X90G 837Y 8½,12¼ 3,000–6,500 40–60 GY

A90 832Y 6¾,75 ⁄ 8 2,500–5,000 30–50 AGY

A90 832Y 9,95 ⁄ 8,97 ⁄ 8,11,12¼ 3,000–6,000 30–50 AGY

A90 832Y 15 2,500–5,000 30–50 AGYTri-Max

TM832 832 6–12¼ 2,000–5,500 60–100

TM837 837 6–12¼ 2,000–5,500 60–85

Varel

CH91MS 837Z 6½ 3,500–6,500 60–40 W

PDC drill bits

GeoDiamond

M06 M442 4¾ 400–3,000 60–600 GMNUhVW

M07 M442 2¾,27 ⁄ 8,3¾,37 ⁄ 8 400–4,000 60–600 GMNUhVW

MA29 M422 8½,83 ⁄ 8,105 ⁄ 8,12¼, 400–4,000 60–600 GMNUhVW14¾,16,17

CTS03 S442 2½,25 ⁄ 8,2¾ 400–4,000 60–600 GMNUhVW

MA31 M432 77 ⁄ 8,83 ⁄ 8,8½,8¾ 400–4,000 60–600 GMNUhVW

MA32 M432 5½,5¾,57 ⁄ 8,6,6¼, 400–4,000 60–600 GMNUhVW6½,6¾,7½,7¾,83 ⁄ 8,8½,8¾,97 ⁄ 8,14¾

Hughes Christensen

HC410 M433 12 235–2,500 50–350 GHMW

HC410Z M433 12 235–2,500 50–350 GHMW

HC410 M433 12 235–2,500 50–350 GHMWHC410Z M433 12 235–2,500 50–350 GHMW

HCM410 M433 12 235–2,500 50–350 GHMW

HCM410Z M433 12 235–2,500 50–350 GHMW

HCR410 M433 12 235–2,500 50–350 GHMW

HCR410Z M433 12 235–2,500 50–350 GHMW

HC510 M423 14¾ 235–2,500 50–350 GHMW

HC510Z M423 14¾ 235–2,500 50–350 GHMW

HCM510 M423 14¾ 235–2,500 50–350 GHMW

HCM510Z M423 14¾ 235–2,500 50–350 GHMW

HCR510 M423 14¾ 235–2,500 50–350 GHMW

HCR510Z M423 14¾ 235–2,500 50–350 GHMW

HC610 M423 14¾,17½ 235–2,500 50–350 GHMW

HC610Z M423 14¾,17½ 235–2,500 50–350 GHMW

HCM610 M423 14¾,17½ 235–2,500 50–350 GHMW

HCM610Z M423 14¾,17½ 235–2,500 50–350 GHMW

HCR610 M423 14¾,17½ 235–2,500 50–350 GHMW

HCR610Z M423 14¾,17½ 235–2,500 50–350 GHMW

HC512 M423 77 ⁄ 8 235–2,500 50–350 GHMW

HC612 M423 8½ 235–2,500 50–350 GHMW

HC612Z M423 8½ 235–2,500 50–350 GHMW

HC512Z M423 77 ⁄ 8 235–2,500 50–350 GHMW

Precise

S193H S434 6,61 ⁄ 8,6¼,77 ⁄ 8,8½,8¾ 500–4,500 40–1,000 V

S2912H S434 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼, 500–4,500 40–1,000 V13¾

S2127H S434 77 ⁄ 8,8½,8¾,97 ⁄ 8,12¼, 500–4,500 40–1,000 V13¾

Tri-Max

EWD 37 ⁄ 8x4¾,43 ⁄ 8x6, No No Underreamer6x7¼,8½x97 ⁄ 8, Limits Limits (Enlarge-105 ⁄ 8x12¾,12¼x14¾, While-14¾x17½,17½x21 Drilling)


Baker Hughes INTEQ

C23 D5X9 4¾x12¼ 500–3,500 60–500 Round M

SC279 D5R0 4¾–12¼ 750–3,500 60–500 Round NMI

SC278 T2X9 4¾–12¼ 750–3,500 60–500 Round KMI

Bit-Tech

DN405RSP M812 3½–8¾ 1,000–4,000 60–120 Custom

GeoDiamond

D42 M712 37 ⁄ 8,41 ⁄ 8,43 ⁄ 8,4½,45 ⁄ 8, 800–4,000 80–900 MNKNUh4¾,6,6¼,6½,8½

XTN33 M841 41 ⁄ 8,6,6½ 350–4,000 100–1,200 MNGUhHK

XTG42 M842 77 ⁄ 8 350–3,500 100–1,200 MNGUhHK

XTG44 M843 57 ⁄ 8,6,61 ⁄ 8,6¼,6½, 350–3,500 100–1,200 MNGUhHK6¾,83 ⁄ 8,8½,8¾,12¼

T72 M843 83 ⁄ 8,8½,12,12¼ 350–3,500 100–1,200 IMNGUhHK Halliburton Security DBS





Ti3125B M842 105 ⁄ 8–12¼ 300–3,000 80–1,200 MNRImpregnated



Hughes Christensen

HH630 M841 3¾–17½ 500–3,500 75–500 MNDIRWUh

HH650 M841 3¾–17½ 500–3,500 75–500 MNDIRWUh

HH670 M841 3¾–17½ 500–3,500 75–500 MNDIRWUh

S279P M841 4¾–12¼ 500–3,500 75–500 MNDIRWUhS279PX M841 4¾–12¼ 500–3,500 75–500 MNDIRWUh

S279 M841 4¾–12¼ 500–3,500 75–500 MNDIRWUh

S280 M841 4¾–12¼ 500–3,500 75–500 MNDIRWUh

T18 M614 4¾–12¼ 300–3,000 75–500 NR

Varel

H600 M814 5¾–8½ 500–2,000 60–1,000 GMNUh


Bit-Tech

CN-425BLP M842 61 ⁄ 8,6¾ 1,000–3,000 60–90 AGRUhW

CN-405RSP M812 61 ⁄ 8,77 ⁄ 8,8½,8¾ 1,000–3,000 60–90 AGKUhW


Ci3156C M843 7½–8½ 250–3,500 50–70 FImpregnated

Ci3124C M844 6–8½ 250–3,500 50–70 FImpregnated

Varel

C600 M814 5¾–8½ 100–2,000 60–120 GKUh

Impregnated diamond bits

Baker Hughes INTEQ

HHC-316 TBD 57 ⁄ 8–12¼ 750–3,500 60–500 GMFR Outerparabolic

Documents

IADC Drill Bit Classifier_2004