huawei V1 R3 upgrade guide

  • View
    123

  • Download
    7

Embed Size (px)

DESCRIPTION

huawei V1 R3 upgrade guide huawei R3 upgrade guide

Text of huawei V1 R3 upgrade guide

V100R300C03SPC200 upgrade Guide

1/30/13

Upgrade Process

1/30/13

Upgrade StepsOpen dc_standalone program for starting the upgrade

1/30/13

Firstly configure ftp server configuration

1/30/13

FTP server must be in Running status

1/30/13

1/30/13

1/30/13

FTP setting

1/30/13

System IP address must be the same as your Laptop IP Address

1/30/13

1. You should put the file in file transfer directory (if D: is CD-ROM change it to E:). 2. You should test FTP and the result should be as here

1/30/13

Test FTP to check the configuration

1/30/13

Backupbefore After

1/30/13

New Task

1/30/13

Upgrade steps Query then next

1/30/13

Upgrade steps

1/30/13

Upgrade steps

1/30/13

Upgrade steps

1/30/13

Upgrade steps

1/30/13

Upgrade steps

1/30/13

Upgrade stepsSelect the target pakage from the specified folder

1/30/13

Upgrade stepsSelect the target pakage from the Select the path from specified folder here

1/30/13

Upgrade steps

1/30/13

Upgrade steps

The path must be as the following d:/OptiX RTN950V100R003C03SPC200(5.76.03. 45)Software_pkg

1/30/13

Upgrade stepsSelect the ne.pkg file and then press ok

1/30/13

Upgrade stepsAfter the new version appeared press ok

1/30/13

Upgrade steps

1/30/13

Upgrade stepspress ok and continue

1/30/13

Upgrade stepsFrom the drag menu select your target version

1/30/13

Upgrade stepsConfirm the version by pressing yes

1/30/13

Upgrade steps

Confirm the pkg file and press ok

1/30/13

Upgrade stepsBe sure you check in the pause list before activate and commit and then press next

1/30/13

Upgrade steps

Confirm the pkg by pressing ok

1/30/13

Upgrade stepsPress start task to start the upgrade steps

1/30/13

Upgrade stepsPress yes to confirm starting the upgrade

1/30/13

Upgrade steps

1/30/13

Upgrade steps

1/30/13

Upgrade steps

1/30/13

Upgrade steps

1/30/13

Upgrade steps

Press continue task to start activation step

1/30/13

Upgrade steps

Press yes to confirm continue task

1/30/13

Upgrade stepsPress ok

1/30/13

Upgrade steps

1/30/13

Upgrade steps

1/30/13

Upgrade steps

Press continue task to start commit step

1/30/13

Upgrade stepsConfirm the continue operation by pressing yes

1/30/13

Upgrade stepsPress ok

1/30/13

Upgrade steps

1/30/13

Upgrade stepsThe operation succeed and you can get report by pressing generate report

1/30/13

Upgrade steps

Choose the correct path and then press OK

1/30/13

Upgrade stepsWhen we upgrade from release to other we must upgrade the capacity license

From the board software management menu select Board software upgrade

1/30/13

Upgrade stepsContinue by choose Login NE

1/30/13

Upgrade stepsContinue by choose Query Board

1/30/13

Upgrade steps

Choose 7-CSH and press >>

1/30/13

Upgrade steps

1/30/13

Upgrade stepsPress the upgrade version folder select

1/30/13

Upgrade stepsSet the board software and load type to license and then select software

1/30/13

Upgrade stepsSelect the file *.ini file

1/30/13

Upgrade stepsConfirm the file sected by pressing OK

1/30/13

Upgrade stepsPress yes to continue

1/30/13

Upgrade stepsPress start to start downloading the license

1/30/13

Upgrade steps

1/30/13

Upgrade stepsThe license downloaded successfuly

1/30/13

Upgrade stepsThe way to create the license file*.ini: Firstly open the following path: V100R003C03SPC200(5.76.03.45)SoftWare_lcs\OptiX RTN 950 V100R003C03SPC200(5.76.03.45)SoftWare_lcs\NELCS+++

1/30/13

Upgrade stepsAfter choosing the specification needed press create to create the ini file

1/30/13

Upgrade stepsSelect the path to save the ini file and then press save

1/30/13

Upgrade stepsAfter the upgrade the RTN may report some or all the following alarms CP_TEL_EXHAUST(major alarm): ignore this alarm User_password needed to be cahanged: close the dc_standalone Port_mode_mismatch(EM6F): check the mode of the node B and change it to 100M full-duplex CLK_NO_TRACE_MODE:from NE EXPLOREselect configuration CLOCK Clock Subnet Configuration add one source for your clock and then press apply the alarm will clear.

1/30/13

Thank You

1/30/13