HI HH 2600 Manual

HI-HH-2600

HF+ Barcode Handheld Reader Industrial Level

HYIN TECHNOLOGY CO.,LTD

www.hyintech.com

Content

Chapter 1. Items include in standard package ▓Product package content ………………………………………...1-2

Chapter 2 HI-2600 Series Introduction ▓HI-2600 introduction …………………………………………2-2

Chapter 3 Get Started ▓ First time operation(Turn on/off, Setup, Adjustment )………….3-2 ▓ General Maintenance …………………………………………….3-3 ▓ On/Off Power ………………………………...……………………3-3 ▓ Touch Screen Adjustment ………………………………………..3-4 ▓ Time and Date setting …………………………………………….3-4 ▓ Touch Setting and input setting…………………………………..3-7 ▓ Input Information ………………………………………………….3-9 ▓ Virtual screen keyboard …………………………………………..3-9 ▓ Use of input keys ………………………………………………….3-9 ▓ Connection to personal Computer ………………………………3-9 ▓ Reconfiguration ………………………………………………….3-10 ▓ Battery operation notice…………………………………………3-10 ▓ Battery level indication …………………………………………..3-11 ▓ Checking of remaining battery…………………………………..3-11

Chapter 4 Accessories Operations ▓ GPRS network connection setting ……………………………..4-15 ▓ WLAN network connection setting …………………………….4-19 ▓ Bar Code Scanning………………………………………………4-23 Appendix HI-2600 Series Specification


www.hyintech.com

Chapter 1. Items include in standard package

▓ Standard Package content


www.hyintech.com

▓ Standard Package Include

Please verify the package content with the following items:

• This User Manual • Hardware include

1.1.1.1.

2.2.2.2.

3333

....

˙battery

˙Hand Stripe

˙Stylus /w rubber spring type thread

˙USB and power adapter cable。

˙Power Adapter


www.hyintech.com

4.4.4.4.

˙HI-2600


www.hyintech.com

Chapter 2 HI-2600 Introduction

▓ HI-2600 Hardware Introduction

Front (Function Introduction)

Front (Buttons Introduction)

Function Shortcut Keys

Rear (Function Introduction)


www.hyintech.com

▓ HI-2600 Hardware Introduction

ⅠⅠⅠⅠ. . . . Front (Function Introduction)

a. Charging and Scanning Status Indicator : While Charging, or Scanning Bar Code, LED will show the operation status. Red means charging battery. Green means fully charged or successfully decoded bar code reading. Flashing green LED means low battery

b. Ear Piece (GPRS): When HI-2600 equipped with GPRS module, insertion of ear piece can provide voice communication.

c. SD/MMC slot: Provide free plug in SD/MMC memory card. d. Touch Screen: Touch screen provide direct operation with

stylus. e. USB & Charging port: Plug in USB or charging cable for data

transfer or charge battery.

a. Charging Status Indicator and

Scanning Status

d. Touch Screen

c. SD/MMC Slot

b. Ear Piece (GPRS)

e. USB and Charging port


www.hyintech.com

ⅡⅡⅡⅡ. . . . Front (Buttons Introduction)

a. Bar Code Scan: Press any of the scanning keys will start to scan bar code.

b. Power On/Off : Press once to turn on or off c. ESC key: Press ESC to exit from fucntion d. Functions key: Pre-program function keys e. Backward: Erase previous character, move cursor

backward. f. S1 key: Press S1 equivalent to press F11 function g. S2 key: Press S2 equivalent to press F12 function h. Numeric Keys: Press numeric keys or compound keys for

Alphabet keys i. Confirm: Press confirm key to execute selected

function j. Backlit key: Turn on/off backlit keys

a. Bar Code Scan keys

c. ESCESCESCESC keykeykeykey

i. Confirm keyConfirm keyConfirm keyConfirm key

b. On/OffOn/OffOn/OffOn/Off(Okay)

g. S2S2S2S2 keykeykeykey

d. Function Function Function Function keykeykeykey

f. S1S1S1S1 keykeykeykey

e. Backward keyBackward keyBackward keyBackward key

h. Numeric keysNumeric keysNumeric keysNumeric keys

j. keyboard backlit keyboard backlit keyboard backlit keyboard backlit keykeykeykey

k. CapsCapsCapsCaps


www.hyintech.com

k. Cap key: Alternatively turn on/off capital letter input

ⅢⅢⅢⅢ. . . . Function Short Cut

Keys Function [Func] + [S1] Lock keypad input [Func] + [S2] Alpha mode/Numeric Mode [Func] + [.] Calibration GPIO CPLD [Func] + [<=] Battery status GPIO CPLD

[Func] + [0] backlight (LED + keypad) GPIO

CPLD [Func] + [1] F1 Windows CE Help [Func] + [2] F2 programmable- Scan code [Func] + [3] F3 programmable- Scan code [Func] + [4] F4 programmable- Scan code [Func] + [5] F5 programmable- Scan code [Func] + [6] F6 programmable- Scan code [Func] + [7] F7 programmable- Scan code [Func] + [8] F8 programmable- Scan code [Func] + [9] F9 programmable- Scan code

www.hyintech.com

Chapter 3 Getting Started

▓ First time operation(Turn on/off, Setup, Adjustment ) ▓ General Maintenance ▓ On/ Off Power ▓ Touch Screen Adjustment ▓ Time and Date setting ▓ Touch Setting and input setting ▓ Input Information ▓ Virtual screen keyboard ▓ Use of input keys ▓ Connection to personal Computer ▓ Reconfiguration ▓ Battery operation notice ▓ Battery level indication ▓ Checking of remaining battery


www.hyintech.com

▓▓▓▓ First Time Operate

Connect Power Adapter to AC Power Source Connect AC Power Adapter to the main unit through power cable and charge the main battery for at least 18 hours before first time operate. Turn On Press On/Off key to turn on main unit. Touch Screen Adjustment Use Stylus point to center of cross appear on screen and release, Adjust until advance to next screen. Confirm Setup Press OK to confirm, save cursor positioning setup. Adjust date and time 1. First of all, adjust the time zone first, select the correct time

zone that you are located, when complete press the “apply” at the bottom right of the screen.

2. Setup Date (year), press once at the year field, then you can select which year. 3. Setup Date (Month), press once at the month field, then you

can select month in the pull-down list; or press left / right for other months.

4. Setup Date (Day), press once at the selected day field, and the setup of date is completed. 5. When Complete, please press upper right corner “OK” to confirm setup.


www.hyintech.com

▓ General Maintenance

Screen Cleaning Use finger touch screen will left fingerprint or dirt on screen and create smudge display. To clean up screen, use the soft cloth apply small amount of glass cleaning solvent and gently rub the screen surface. Please do not directly apply the glass cleaning solvent onto the screen. You may use screen protector to protect the screen.

▓▓▓▓ On/Off Power

Turn On Power While in Power Off mode, press once at On/Off Key will turn on HI-2600. Turn Off Power While in Power On mode, press once at On/Off key will turn off HI-2600.

▓▓▓▓ Touch Screen Adjustment

After a period of time, you may find out the touch screen is not so sensitive, thereafter, you may recalibrate the touch screen. Steps: 1.Choose Control Panel, select “pen point”, then select

“adjustment”, select “readjustment”, the adjustment screen will appear.

** The above words “pen point”, “adjustment”, “read justment” may appear differently

in your machine due to the following reason

• This is a direct translation from foreign language, therefore the actual message

prompt at the screen with your local language may a ppear different, but the

meaning should be equivalent.

• This may also caused by different version of operat ing system


www.hyintech.com

2. Use Stylus point to center of cross appear on screen and hold at least one second and release, Adjust until advance to next screen.

3.Press [OK] to confirm, save the cursor positioning.

˙cross appear on setup

screen

˙After touch screen

recalibration, select [OK]

on the upper right corner

to confirm and complete


www.hyintech.com

▓ Time and Date Setting

Double touch lower bottom “time”

display to access to time/date setup

screen

˙Setup Time Zone first, touch pull

down arrow on the right to appear a

selection of time zone, and choose

the correct time zone and high-light

it.


www.hyintech.com

˙Touch up/down pull down arrow to

select year and high-light correct

year


www.hyintech.com

˙Touch Month pull down and high

light to select the correct month

˙touch and high light the selected

day.


www.hyintech.com

▓▓▓▓ Touch and input

Just like using mouse in your PC, use the stylus touch screen is the basic operation. When first time use HI-2600, screen will prompt instruction to follow. This procedure include screen adjustment. This adjustment will calibrate the internal circuitry to corresponds to the touch sensor on the screen. Therefore, when you touch the screen the HI-2600 will response correctly and accurately. Notice: Please use stylus to touch the HI-2600 screen, do not

use any sharp point object such as ball pen to scrape on the screen.

When HI-2600 is in operating mode, you may touch HI-2600 touch screen to execution program, example:

• Open Startup menu • Select menu instruction • Select pull down choice item • Open virtual keyboard

Similar to the mouse drag and drop high-light wording or move selected items, you may also press on the scroll up and down on display. ▓ Input Information You may use the following methods to input information into

˙touch [OK] on the upper right

corner to finish and complete


www.hyintech.com

HI-2600:

• Input from virtual keyboard • Input directly from numeric keys or compound keys on

HI-2600 keypad ▓ Virtual screen keyboard Virtual screen keyboard is displayed on the lower portion of the screen, select input method, shift to alphabet or number or symbols input or even handwriting input.

˙Double touch lower right corner

virtual keyboard to prompt up the

virtual keyboard

˙Select keyboard


www.hyintech.com

▓▓▓▓ Use of input key

1. Use[Func] + [S2]function keys shift to numeric and alphabet mode.

2. Input directly from keyboard ▓ Bar Code Scanning

1. Press on/off key, turn on HI-2600 2. Execute bar code scanning program 3. Press any of the scan buttons to scan bar code. Make sure

scan beam totally cut across bar code with at least over 10%, this is to cover quiet zones in leading and ending of the bar code.

˙Select hide virtual keyboard to

close

˙Input keyboard display


www.hyintech.com

▓ Connects to PC

1. Install Microsoft ActiveSync first in PC(Can download from Microsoft website).

2. Setup in HI-2600: Select Start/Setup/ Control Panel/ PC Connect/ Change connection, select USB Socket Default.


www.hyintech.com

▓ Reset

In normal condition, you do not need to press “Reset” button, However, when you encounter situation of no response from touch screen, then you should press “Reset” and resume the HI-2600 to normal operation. ▓ Soft Reset Soft Reset(Software reset) make HI-2600 stop execute current process, and restart HI-2600. All data and program in working memory will be lost. Execute method: Use stylus tip press into “Reset” button. ▓ Hard Reset Hard Reset(hardware reset) will make HI-2600 force shutdown and clean up the current process and data stored in the working memory. Execute method: press and hold on/off key, at the same time use Stylus tip press “Reset” key. ▓ Note about Battery Usage Because the files and information are stored in RAM (Random Access Internal Memory), therefore retain the battery at functional level is very important. If you operate until the battery is depleted, your data information will be lost. Although the O.S. and internal programs will not be erased, however, add on program and special setup will be lost. In normal situation, HI-2600 can operate 8 hours after complete charge. When power drop below minimum power threshold, it be appear lack of power (insufficient main battery) signal, you should immediately response to this warning by backup data to the host computer in order to avoid data lost. If you turn off HI-2600, data can retain for 3 days.


www.hyintech.com

When connect HI-2600 to power adapter, HI-2600 will automatically charge up main battery. Therefore, when encounter low battery, the scanning led will appear flash green light, in such situation you should connect power adapter immediately. When you connect HI-2600 power adapter, scanning led will show the charging status:

• Red light indicate currently charging • Green light indicate fully charged


www.hyintech.com

▓▓▓▓ Battery Voltage Indication

Main Battery Voltage Indication Normal : 40% or above

Low Power : 10%-40%

Insufficient : 10% or below

▓▓▓▓ Checking of battery level

Method 1

˙ icon will be appeared at the bottom of

the HI-2600 screen means it is currently

connected to power adapter.

˙Double touch at the icon , will

appear battery property.


www.hyintech.com

Method 2

˙Touch and select setup

start/setup/control panel

˙Double touch


www.hyintech.com

˙When battery below 7.4V threshold,

warning message will appear on screen

to indicate low battery with single

battery icon .

˙When power level below 7.5V, this screen

will appear to indicate low battery,

warning message will be main battery low,

bottom of screen will appear icon.


Chapter 4 Accessories Operations

▓ GPRS network connection setting ▓ WLAN network connection setting ▓ Bar Code Scanning


www.hyintech.com

▓ GPRSGPRSGPRSGPRS network settingnetwork settingnetwork settingnetwork setting

In HI-2600 select start/setup/control

panel/network and dial up connection

New Connection

Select “Dial up connection”.


www.hyintech.com

input name for connection

(i.e.:GPRS)

Select Modem: VCA1 ** Please select

virtual communication port 1

Select port setup for baud rate

to :115200 “8” date bit, parity

“none” and flow control “ none”


www.hyintech.com

Dial up selection setup

Please input in “Extra Settings” field with the

reference code of the telecommunication operator.

For example: China Telecom is :

+CGDCONT=1,"IP","INTERNET","",0,0

Far Transmit telecom is:

+CGDCONT=1,"IP","FETNET01","",0,0

China Mobile:

+CGDCONT=1,"IP","cmnet" not necessary all

telecom provide has this parameters.

No necessary to change any

setting in TCP/IP setup ( use

default will do)

Select next step and enter connect

number: please input *99***1#,

then select “finish” GPRS

connection setup.


www.hyintech.com

First execution of new dial up

network select “dial up

property”.

Select “Edit”

˙Amend Dial up within city “G”

Amend dial up long distance ”G”

Amend dial up

international ”G”

Select “OK”


www.hyintech.com

▓▓▓▓ WLANWLANWLANWLAN network settingnetwork settingnetwork settingnetwork setting

Select Connect

Select network

connect icon.

Select ”OK” to next


www.hyintech.com

Check status of

connection

Select connect

Select wireless

information


www.hyintech.com

Select security type. Please

contact your network

manager for correct setup

Select Identity Certificate

type. Please contact your

network manager for correct

setup

select default connection


www.hyintech.com

Select EAP type. Please contact

your network administrator for

detail information.

Input network security keys.

Please contact your network

administrator for detail

icon shows the connection

status


www.hyintech.com

▓ Scan Bar Code Detail instruction is available in SDK

Select ScanV01 and execute

Appendix

▓ HI-2600 Series standards

Product Intrduction ：：：：

� Industial Level HF handheld reader;

� High capability barcode scanner.

� Combined PDA and RFID technology, with data collecting and storing features;

� WiFi,Bluetooth, and GPRS for Real-time connection

� Support Wavelink Avalanche For remote mobile devices management

� Support OAC Client for 802.1 Security

� Support T9 multilingual intellignent input method

� Industrial grade hardware design , durable and able to sustain in harsh enviroment

� Support signature capture function

� Special design be applied in industry market and hazardous environments. e.g. logistic

management, asset tracking, anti-fake etc ;

Specification:

HF Reader

Supported protocal:

ISO/IEC 14443A/B ISO/IEC 15693； Mifare One S50,S70, UltraLight,PRO；

AT88RF020 66CL160S ；

Frequency：13.56MHz

Bound Rate：9600-115200 bit/s

Operation Distance：0--8cm

Support：

SR176；SRIX4K（TYPE-B）；I-Code2；TI RFID Tag-it HF-I，EM4135,EM4034 etc.

Working temperature：-10 degree ～ +40 degree

Storage Temperature：-20 degree～ +70 degree

Barcode Scanner Optical Definition：0.004 inch(smallest width)

Frequency： 100 time per second（bi- direction）

scanning distance ：10～78cn

Sunlight： 8,000 ft. candles (86,112Lux)

artifical light：450 ft. candles (4,844Lux)

anti-shake：2,000 +/- 5% G

supported barcode style：

UPC-A,UPC-E, EAN-13,/JAN-13, EAN-8/JAN-8, CODE 39, CODE 128,

CODABAR/NW7,Interleave 2/5, Industrial 2/5, Matrix 2/5, CODE 93, CODE 11,

China Postage, MSI/PLESSEY.

Physical Characteristics

Size：190x90x25mm

Wight：400g 〔with standard battery〕

Operation Environment

Operating Temperature：-15 OC to +50 CC

Storage Temperature ：-20 OC to +80 OC

Sealing Standard：IP54

Drop Proof：Sustain 1.2m multiple drops on concrete floor

Battery Ni-ion battery ：3.7v 2800mAh/ 3200mAh

Operating System Windows CE 5.0

CPU SAMSUNG 400 MHz CPU

Storage Flash 64/128MB; RAM 64/128MB，Support up to 1GB SD Flash

Display 3.5” QVGA (240x320 pixel) 64K color，reflexive TFT-LCD，LED backlit

Keyboard 25+1 Compound backlit keyboard; soft touch, support handwriting input

Sound Track support ；；；；Dual Speaker

Standard Communication

USB1.1 Host and Client BlueTooth Class2 V1.1 (Optional)

RS232 Port Integrated GSM/GPRS Communication Module

(900/1800/1900MHz) (Optional)

Wireless Network IEEE802.11b/g Standard

(11Mb/S-54Mb/S) (Optional)

Bar Code Scanning System

Integrated Bar Code Laser Scanner (Selective); Support EAN, UPC, JAN, Code11, Code 39, I 2 of 5

and more

WLAN Security

WPA, 802.11i(WPA2), WEP, TKIP, TLS, TTLS, AES, PEAP, LEAP, MD5

Battery Charger Standard battery charger 5V 3A；Vehicle charger port also available

Accessory USB Data Cable, Vehicle Charger, Serial/USB/battery charge Cradle 1-Slot/2-Slot/4-Slot,

pouch, carrying case, screen protector

Documents

HI HH 2600 Manual