Hexarmor catalogus

TM

PROTECT YOURSELFWITH THE INDUSTRY LEADER.

REAL PROTECTIONREAL WORK DESERVES

MINING | OIL & GAS | EXTRICATION

MINING | OIL & GAS | EXTRICATION GRIP | COMFORT | PERFORMANCE

GRIP | COMFORT | PERFORMANCE

CUT | PUNCTURE | COLD | HEAT | ABRASION | NEEDLESTICK

CUT | PUNCTURE | COLD | HEAT | ABRASION | NEEDLESTICK

META

L | OIL | LU

MB

ER | EX

TRICA

TION

| STEEL

At HexArmor®, we believe safety is not a luxury, but a necessity. Since our inception, HexArmor® has worked hand in hand with our customers to deliver the most innovative and effective technologies to keep people safe.

Our belief is that every worker should be able to go home at night in the same condition he or she went to work. Excellence in safety is not a hollow promise; it is our goal and drive, every day.

If you are like us, your commitment to employee health and safety has driven you to continually explore new ways to protect your employees. Our goal is to provide you with a wide array of HexArmor® purpose-built tools, each one with a unique and exciting story.

Each of our products has been researched, trialed, adapted, and improved upon with the invaluable assistance of the field professionals who are committed to employee safety. Through this special relationship, we are proud to offer the most comprehensive and specialized hand and arm protective equipment available today.

Our mission has always been the same: to be the trusted advisors for your safety program. Over the years, we have become pretty good at listening to our customers, and we use that input to find safety solutions.

I hope you find it a pleasure to work with our team of safety professionals. They have the experience and training to help you navigate the many available options and select the best products to help ensure the safety of your people.

Steve VanErmenPresident & [email protected]

877.MYARMOR | hexarmor.com Letter from the President I Page 3

Unbeatable Cut Protection The HexArmor Elite® collection of products uses SuperFabric® brand material to provide cut resistance that exceeds ANSI/ISEA and CE Level 5.

Industrial Puncture Resistance Many lacerations start out as a puncture. HexArmor Elite® gloves provide protection from burrs, metal wires, slivers, and similar hazards.

Needlestick Resistance HexArmor® has developed a line of needlestick-resistant products to keep hands safe from incidental contact with hypodermic needles. Multiple aligned layers of fabric arrest, trap,and block needles and other hazards.

Abrasion Resistance HexArmor Elite® products provide significantly higher abrasion resistance than standard competitive PPE, which means higher performance longer in the product’s life.

HexArmor® has partnered with HDM Inc. to design technologies with unique capabilities for the safety market. SuperFabric® technology, by HDM Inc., is a finishing process that takes ordinary fabrics and transforms them into high-performance products collectively known as SuperFabric® brand materials. These new protective fabrics can be engineered for optimum resistance to abrasions, lacerations, punctures, stains, and more, while remaining highly flexible. HexArmor® utilizes variations of SuperFabric® technologies that are directly integrated into high-performance products (gloves, arm, and body protection) through different patterns of cut/sewn and direct print technologies and processes.

Advanced Technologies

HexArmor® has been a leader in technology and innovation since our founding. Our breakthroughs in materials, design, and functionality have changed the hand, arm, and body personal protective equipment (PPE) landscape, and they continue to redefine the standards of safety in the industrial sector.

In addition to top-level cut, puncture, and abrasion resistance, we have outfitted our gloves and body protection with purpose-built technology created for a wide variety of hazards and applications. Our patented innovations are what make us today’s trusted advisor in the safety industry.

Unparalleled Impact ResistanceOur proprietary IR-X® Impact Exoskeleton™ shields users’ entire back-of-hand, protecting every joint and knuckle from debilitating blows. Redesigned impact guards on our Rig Lizard® gloves provide more flex points for comfort and dexterity.

A Grip for Every JobWhen you’re on the job site, you often encounter a variety of liquids, oils, muds, and other unidentified substances. Our products offer a wide variety of grip options to provide users with the appropriate grip for the task at hand.

Waterproof Our H2X® liner creates a waterproof barrier between your hands and wet hazards, keeping hands dry and comfortable. H2X® also meets ASTM F1670/F1671 standards for bloodborne pathogen resistance and fluid-borne viral resistance.

Cold and Warm Weather SolutionsHexArmor® Arctic gloves combine our H2X® waterproof liner with a C40 Thinsulate™ liner, creating a two-layer barrier from wind, water, and chill. HexArmor® Oasis gloves are made with HexVent® technology, which creates a breathable heat-release system, keeping hands cool and comfortable.

877.MYARMOR | hexarmor.com Technology I Page 5

Preventing Lacerations and Puncture Wounds

Many lacerations startout as a puncture. A sharp edge, corner, burr, wire “wicker,” or other protruding hazard can penetrate the glove and scrape or cut skin. With synthetic leather or cotton gloves, the hazard will poke through the surface of the glove and tear laterally to create a laceration. While a glove may say it has “cut resistance,” it often lacks the puncture protection to stop lacerations.

Proven Protection Against PuncturesHexArmor Elite® safety gloves are tested in both the lab and the field to validate the highest degree of puncture resistance and performance.

HexArmor Elite® Synthetic Leather Gloves

HexArmor Elite® Synthetic Leather Gloves

Standard Synthetic Leather Gloves

Skin SurfaceCut Injury

Outer Shell

Outer Shell

Outer Shell

Skin SurfacePlates

Skin SurfacePlates

IR-X® Impact Exoskeleton™

The most advanced HexArmor® impact resistance comes with all the dexterity, all the comfort, and more protection than that offered by any other impact-protective glove on the market. Our proprietary IR-X® technology shields our gloves with a full back-of-hand exoskeleton, so every joint and knuckle is protected from debilitating blows. IR-X® smash guards are purpose-built to deflect the force of sudden impacts away from the impact point, rather than transferring force directly to the hand. This unique characteristic is what sets IR-X® safety levels higher than the competition, and its flexibility is what makes the IR-X® Impact Exoskeleton™ more comfortable and more dexterous than any other impact-resistant technology available.

Glove Shell

Hand

Competitive Impact Protection

TraditionalImpact Guards

Bone

Glove Shell

Hand

HexArmor® IR-X®

Bone

HexArmor® IR-X® Impact Guards

The HexArmor® IR-X® Impact Exoskeleton™ creates a barrier between your hand and impact and smash injuries. IR-X® guards cover the entire back-of-hand, including the knuckles, where the majority of impacts occur.


The Next Generation of Impact Protection

Grip Technologies

Gator Grip Technology®: A highly specialized SuperFabric® brand material palm with silicone dots. The SuperFabric® guard plates bite through and channel away lubricants, creating a “snow tire” effect that allows the user to grip oily or lubricated parts and tools. The silicone dots provide added friction for a tacky grip. Found on the 4020X.

Synthetic Leather:Our synthetic leather is the highest quality, so it’s extremely abrasion-resistant and durable, and lasts longer than other gloves. Some products combine the synthetic leather with PVC print for enhanced grip capabilities. Mining companies and contractors have used this grip successfully for general facility and maintenance applications. Found on the 4018, 4019, 4022, 4023, 4024, 4025, 4028, 4030, 4032, 4033, and 4034.

HexArmor Mud Grip+®: Synthetic leather palm with larger PVC dots which create friction and improve grip on metal tools. A good all-around grip that does well in wet conditions and provides excellent dry grip for general tasks. Gloves with this grip have been used for roof bolting operations and handling drill bits. Found on the 2028.

TP-X®:TP-X® is a technical protective palm material that works well in oils and fluids because the surface does not absorb wetness, helping to maintain grip. Best for light to medium oily or wet conditions. Provides more abrasion resistance than synthetic leather, and some industrial puncture resistance. Found on the 2021, 2022, 2023, 2029, 4010, 4027, 4031 and 4036.

TP-X+®:TP-X+® is a robust, heavy-duty TP-X® material that provides additional cut, puncture and abrasion resistance and improved grip. The raised texture creates channels or grooves in the material, so it has enhanced grip over time. Also provides additional resistance to heat. Found on the 2025 and 2026.

HexArmor Mud Grip®: Synthetic leather palm with PVC dots. The surface wicks away lubricant, allowing PVC dots to create friction and improve grip on metal tools. A good all-around grip, it does well in wet conditions sometimes found in certain mining processes. It also provides excellent dry grip for general tasks. Found on the 4021X and 4026.


Palm Dips

Wrinkle Rubber LatexWrinkle rubber latex is a flexible, non-porous palm dip that provides excellent dry grip. It offers good wet grip, but is not recommended for use with hydrocarbon and organic solvents such as gasoline as these can cause premature degradation. This polymer may cause allergic reactions in some people. When wrinkle rubber gets wet, it can turn a powdery gray; however, this does not affect performance. Found on the 2081, 2086, and 9015.

Sandy NitrileSandy nitrile provides a good dry and wet grip. It is lightweight, providing excellent dexterity, and it also adds a high level of abrasion resistance. A good choice for incidental contact with unknown substances such as solvents, chemicals, oils, etc. Found on the 2090 and 9013.

FR-Compliant DipOur FR-compliant palm dip increases snag and abrasion resistance and offers exceptional dry and light oil grip. Paired with a flame-resistant knit shell of 13-gauge Kevlar® and wool, it can provide hazard risk category HRC level 1 arc flash protection: ATPV 7.7 cal/cm2, as per ASTM F2675/F2675M-13, determining arc flash rating of hand protection devices, and contact heat protection up to 100°C (212°F). Found on the 2082.

Textured PVCPVC (polyvinyl chloride) is often used in gloves designed for liquid and certain chemical resistance. It is an effective barrier against water and most watery solutions, such as detergents or diluted acids. Because PVC is 100% synthetic, it contains no latex proteins and is hypo-allergenic. Found on the 7200, 7300, 7301, and 7302.

Foam NitrileFoam nitrile excels in wet conditions, and it offers excellent oil grip because of its porous properties. Oils are channeled away from the surface of a tool, allowing for more contact with the surface area, which substantially improves grip. Found on the 2080, 2087, 2088, 2089, and 9016.

PolyurethanePolyurethane (PU) provides excellent dry grip that offers a balance between being tacky but not too sticky. It’s a lightweight dip, helping gloves maintain a high level of dexterity and tactile sensitivity. As such, PU is good for handling small parts. Found on the 2085.

The Hex1® series is designed for general industrial applications. It’s purpose-built to protect you from common workplace hazards, without sacrificing comfort and dexterity.

ColdRush™ personal cooling system from HexArmor®, made with eVapora™ technology, is a quick absorbing material which retains moisture and slowly allows it to evaporate, creating a cooling effect on the skin.

HexArmor Elite® encompasses the highest level of safety you can find on the market. All Elite products offer ISEA and CE Level 5 cut resistance and are built to withstand the most hazardous work environments.

HexArmor Elite® Products:

Chrome Series® Mechanic’sGGT5®

EXT Rescue®

9000 Series™NXT™ThornArmor®

Needlestick-ResistantHeavy DutyArm & Body Protection

HexArmor Red® offers up to Level 3 and 4 cut resistance. Red products are made with the care, focus, added features, and impeccable design you would expect only from HexArmor®.

HexArmor Red® Products:

Rig Lizard®

2000 Series™

These industrial-grade work boot covers are designed to help you get your work done quickly and efficiently without making a mess.

No matter what the working conditions, HexDri® with H3O® technology keeps water out while still allowing your hands to breathe and move.

Our Product Collections

Additional Product Collections:

Chrome Series® 4004 Chrome Series® 4005 Mechanic’s+ 4018 Mechanic’s+ 4019 Chrome Series® 4022 Chrome Series® 360˚ 4023 Chrome Series® 4024

Chrome Series® 360˚ 4025 Chrome Series® 4026 Chrome Series® 4027 Chrome Series® SlipFit® 4028 Chrome Oasis® 4030 Chrome Series® Waterproof 4036 Chrome Series® 4080

Chrome Series® 4081 Chrome Series® Arctic 4082 Chrome Core™ 4032 Chrome Core™ 4033 Chrome Core™ 4034

Chrome Series® Mechanic’s I Pages 16-21

GGT5® 4010 GGT5® Gator Grip™ 4020X GGT5® Mud Grip™ 4021X GGT5® Arctic Gator® 4031

GGT5® Series I Pages 22-23

Rig Lizard® 2020 Rig Lizard® 2021 Rig Lizard Oasis® 2022 Rig Lizard Arctic® 2023 Rig Lizard® 2024 Rig Lizard® 2025 Rig Lizard Arctic® 2026

Rig Lizard® MudGrip+ 2028 Rig Lizard® Waterproof 2029 Rig Lizard® 2031 Rig Lizard® 2032 Rig Lizard Arctic® 2033 Thin Lizzie™ 2090 Thin Lizzie™ 2091

Rig Lizard® I Pages 24-27

877.MYARMOR | hexarmor.com Product Lineup I Page 11

Product Lineup

9000 Series™ Liner 9009 9000 Series™ 9010 9000 Series™ 9011 9000 Series™ 9013 9000 Series™ 9015 9000 Series™ 9016

9000 Series™ I Pages 30-31

EXT Rescue® 4011 EXT Rescue® 4012 EXT Rescue® 4013 EXT Rescue® Barrier 4014

EXT Rescue® I Pages 28-29

2000 Series™ 2080 2000 Series™ 2081 2000 Series™ FR 2082 2000 Series™ FR Liner 2083 2000 Series™ 2085 2000 Series™ 2086

2000 Series™ 2087 2000 Series™ 2088 2000 Series™ 2089

2000 Series™ I Pages 32-35

Product Lineup


Hex1® 2120 Hex1® 2120-BLK Hex1® 2120-TAN Hex1® 2121 Hex1® 2121-CAM Hex1® Tack Grip 2122

Hex1® Arctic 2123 Hex1® Impact 2125 Hex1® Impact 2125-BLK Hex1® Ultimate Impact 2130

Hex1™ I Pages 36-39

SharpsMaster II® 9014 SharpsMaster HV™ 7082 PointGuard® X 6044 Hercules NSR 3041 NSR 4041 General Search & Duty 4045

Leather Tactical 4046 8” Arm Guard AG8TW

Needlestick-Resistant I Pages 46-50

NXT™ 10-302

NXT™ I Pages 40-43

ThornArmor® 3090 ThornArmor® 3092

NEW! ThornArmor® I Pages 44-45

9” Arm Guard AG10009S 9” Arm Guard AG9V 9” Arm Guard AG9X 19” Arm Sleeve AS019S PentaArmor® Sleeve 1010 20”x30” AP229

24”x30” Apron AP102229 20”x22” Apron AP102222 36” Apron AP361 24”x30” Apron AP321/322 24”x38” Apron AP382 HexJacket HAJ01/HAJ02

Leg Gaitors 9921 Chaps 9911/9915/9919 HexMat 9905/9907

Arm & Body Protection I Pages 56-61

Arctic Mitt 4050 Hercules 400R6E SteelLeather® III 5033 SteelLeather® IX 5039 Bandit® 5040 TenX Threesixty 7090

BladeMaster® Ultimate 8020 Hotmill 8100/HWT8100

Heavy Duty I Pages 52-55

Product Lineup

ColdRush™ Du Rag ColdRush™ Bandana ColdRush™ Neck Band ColdRush™ Towel

HexDri® 2180 HexDri® 2182

COMING SOON! HexDri® I Pages 68-69

NEW! ColdRush™ Cooling Technology Apparel I Pages 62-63

YULEYS® Blue YULEYS® Gray YULEYS® Red

NEW! YULEYS® Clean Step System I Pages 64-65

The Mudder™ 7300 The Mudder™ 7301 The Mudder™ 7302

NEW! Liquid/Chemical-Resistant I Pages 66-67

Liquid/Chemical-Resistant 7200


ColdRush™ Hard Hat Insert

The Safest Mechanic’s Style Glove on the MarketHexArmor® Chrome Series® gloves are built for a wide array of applications. Each product in the series was crafted to fit a hand with a specific purpose. With over 15 styles and various features such as impact protection, an abrasion-resistant knuckle patch, or a PVC printed palm, you can be certain that the Chrome Series® will keep your hands protected in any hazardous condition.

877.MYARMOR | hexarmor.com Chrome Series® Mechanic’s I Page 17

Mechanic’s+ 4019• SuperFabric® brand material palm provides

ISEA/CE Level 5 cut resistance (interior layer)

• Cut and abrasion-resistant knuckle patch

• Back-of-thumb brow cloth

• Synthetic leather palm with PVC print

• Touchscreen-compatible conducive filaments in thumb and index fingertip

• SlipFit® cuff with nametag

Available in sizes 6/XS through 12/3XL

SuperFabric®

Protection ZoneSuperFabric®

Protection Zone

4522ISEA

CUT: 5

Chrome Series®

Tactical 4005• SuperFabric® brand material palm provides


• Superior back-of-hand impact protection dissipates forceful blows over a large area

• Impact protection on index finger does not extend to tip, providing a clean trigger finger

• Synthetic leather palm

• Elastic cuff with pull tab and Velcro® closure

• Dark color scheme for increased concealment in covert situations

Available in sizes 7/S through 11/XXL

PENDINGISEA

CUT: 5

Mechanic’s+ 4018• SuperFabric® brand material palm provides




• Reflective tape on back-of-hand


Available in sizes 5/XXS through 12/3XL

4522ISEA

CUT: 5

Chrome Series®

Tactical 4004• SuperFabric® brand material palm provides



• Impact protection on index finger does not extend to tip, providing a clean trigger finger



• Neutral color scheme for increased concealment in covert situations


PENDINGISEA

CUT: 5

SuperFabric®

Protection Zone

Impact Protection

SuperFabric®

Protection Zone

Impact Protection

20X More Cut Resistance than Leather Mechanic’s-style gloves fit well, are comfortable, and offer great dexterity. Too often, however, safety managers can’t use them; thin synthetic leather and nylon aren’t strong enough to prevent injuries. When 250 grams is considered cut resistant, you have a problem. This led to the idea that HexArmor® could use our advanced technologies to create safe mechanic’s gloves without sacrificing comfort or dexterity. Chrome Series® gloves exceed ISEA Level 5 cut resistance, providing over 5000 grams of protection, 20 times the amount offered by a standard leather glove. Don’t settle for anything less than the safest mechanic’s-style glove on the market.

Chrome Series®

360˚ 4025• SuperFabric® brand material provides 360˚






SuperFabric®

Protection Zone

Impact Protection

4521ISEA

CUT: 5

Chrome Series® 4024• SuperFabric® brand material palm provides



• Padded palm reduces vibration damage while returning a higher level of comfort




SuperFabric®

Protection Zone

Impact Protection

4532ISEA

CUT: 5

Chrome Series®

4026• SuperFabric® brand material palm provides



• Mud Grip™ synthetic leather palm with PVC dots

• Hi-vis color and reflective tape on back-of-hand



SuperFabric®

Protection Zone

Impact Protection

SuperFabric®

Protection Zone

Impact Protection

4521ISEA

CUT: 5 4541ISEA

CUT: 5




• Durable TP-X® palm with reinforced stitching

• Hi-vis color and reflective tape on back-of-hand


Available in sizes 7/S through 12/3XL

Chrome Series®

360˚ 4023• SuperFabric® brand material provides 360˚




• Neoprene cuff with pull tab and Velcro® closure








SuperFabric®

Protection Zone

2 LayersSuperFabric® Protection

SuperFabric®

Protection Zone

4521ISEA

CUT: 5 4521ISEA

CUT: 5

Chrome Oasis® 4030• SuperFabric® brand material palm provides


• Advanced HexVent® technology allows for a breathable heat-release system





Chrome Series® SlipFit® 4028• SuperFabric® brand material palm provides




• SlipFit® cuff

Available in sizes 7/S through 11/XXL4521

ISEACUT: 5 4521

ISEACUT: 5

SuperFabric®

Protection Zone

Impact Protection

SuperFabric®

Protection Zone

Impact Protection

877.MYARMOR | hexarmor.com Chrome Series® Mechanic’s I Page 19

Chrome Series®

Waterproof 4036• SuperFabric® brand material palm provides


• H2X® liner creates a waterproof layer of defense against wet hazards: glove passes EN 659:2003 for waterproof testing under method EN659:2003 + A1 2008 Clause 3.17 (ISO 15383)



• SlipFit® cuff with pull tab

Available in sizes 7/S through 12/3XLSuperFabric®

Protection Zone

Impact Protection

4532ISEA

CUT: 5

Chrome Series® Leather Impact 4080• SuperFabric® brand material palm provides


• Hi-vis back-of-hand impact protection dissipates forceful blows over a large area

• Goatskin leather palm provides a traditional style of comfort and grip

• Velcro® cuff for a comfortable and precise fit


SuperFabric®

Protection Zone

Impact Protection

PENDINGISEA

CUT: 5

Chrome Series® Leather 4081• SuperFabric® brand material palm provides





SuperFabric®

Protection Zone

PENDINGISEA

CUT: 5

Chrome Series® Arctic Leather 4082• SuperFabric® brand material palm provides


• C40 Thinsulate™ interior liner keeps hands warm and dry




SuperFabric®

Protection Zone

PENDINGISEA

CUT: 5

“I wear the HexArmor® gloves every chance I get, now more than ever.

You will never want to use another pair of cheap mechanic’s gloves again after you try these!”

Mike T., US Army Engineer

me

ta

l | o

il | l

um

be

r | e

xt

ric

at

ion

| st

ee

l

me

ta

l | o

il | l

um

be

r | e

xt

ric

at

ion

| st

ee

l 877.MYARMOR | hexarmor.com Chrome Series® Mechanic’s I Page 21

Chrome Core™ 4032• SuperFabric® brand material palm provides



• Neoprene™ cuff with Velcro® closure





• SlipFit® cuff

Available in sizes 7/S through 11/XXL4521

SuperFabric®


Protection Zone

4521ISEA

CUT: 5ISEA

CUT: 5




• Partial fingers on index, middle, and thumb for high dexterity applications

• SlipFit® cuff


SuperFabric®

Protection Zone

4521ISEA

CUT: 5

Chrome Core™ cut-resistant mechanic’s gloves combine comfort with cut protection that exceeds ANSI and CE level 5 standards.

Engineered to Provide Maximum ProtectionThe GGT5® Series was built to be the toughest oil, gas, and mining glove on the market. With such a high level of safety hazards on these job sites, we made sure that the GGT5® Series was complete with ISEA Level 5 cut protection and an IR-X® Impact Exoskeleton™. Our specialized grips are designed to handle long days working with heavy tools, pipes, and machinery, to give workers the protection needed to get the job done.

877.MYARMOR | hexarmor.com GGT5® Series I Page 23

4542ISEA

CUT: 5

GGT5® Gator Grip™ 4020X• SuperFabric® brand material palm

provides ISEA/CE Level 5 cut resistance

• Full Impact Exoskeleton™ with high-performance IR-X® smash guards

• Gator Grip Technology® prevents formation of oil film and displaces oil, allowing maximum contact with tools

• SlipFit® cuff with pull tab and nametag


GGT5® Mud Grip™4021X• SuperFabric® brand material palm provides



• Mud Grip™ synthetic leather palm with PVC dots works well with light/medium oil-based muds

• Durable TP-X® palm patches



4544ISEA

CUT: 5 4543ISEA

CUT: 5

GGT5® Arctic Gator® 4031• SuperFabric® brand material palm provides



• H2X® and C40 Thinsulate™ interior liners keep hands warm and dry




GGT5® 4010• SuperFabric® brand material palm provides



• Additional IR-X® guard between thumb and index finger



• Hi-vis color scheme


4543ISEA

CUT: 5

SuperFabric®

Protection Zone

Impact Protection

SuperFabric®

Protection Zone

Impact Protection

SuperFabric®

Protection Zone

Impact Protection

SuperFabric®

Protection Zone

Impact Protection

“The hand protection is far superior to any other glove I have used. Anything coming into contact with the front of my hand was easily dampened by the padding, and that is a very big deal when nothing I work with weighs less than a couple hundred pounds.”

-J.M., Precision Drilling

The Perfect Combination of Comfort and SafetyThe Rig Lizard® Series is purpose-built to provide maximum grip in tough situations – with five grip options for water, oils, muds, and lubricants. Each glove is also equipped with our highly flexible IR-X® Impact Exoskeleton™, keeping hands protected from smash and pinch injuries. This combination of multiple technologies and features makes the Rig Lizard® the ideal solution for common oil, gas, and mining hazards. And with options for cold and warm weather protection, your hands can stay safe and comfortable in any environment.

877.MYARMOR | hexarmor.com Rig Lizard® I Page 25

PENDINGISEA

CUT: 3 4243ISEA

CUT: 3

4544ISEA

CUT: 4

4244ISEA

CUT: 34243ISEA

CUT: 3

Rig Lizard® 2024• IR-X® Impact Exoskeleton™ with high-flex

design protects against forceful blows to the back of hand


• Canvas+™ cotton palm with polyurethane backing provides superior grip in saturated situations


• Protected by U.S. Patent No. D703,389


Rig Lizard® 2025• SuperFabric® brand material palm

provides ISEA Level 4/CE Level 5 cut resistance (interior layer)

• IR-X® Impact Exoskeleton™ with high-flex design protects against forceful blows to the back of hand


• Durable TP-X+® palm with reinforced stitching




Rig Lizard Oasis® 2022• Advanced HexVent® nylon allows for

a breathable heat-release system







Rig Lizard Arctic® 2023• IR-X® Impact Exoskeleton™ with high-flex












• SlipFit® cuff with Velcro® closure, pull tab, and nametag










TP-X® Technology TP-X® Technology

TP-X+® Technology

TP-X® TechnologyTP-X® Technology

Canvas+™ Technology

Impact Protection Impact Protection

Impact Protection

Impact ProtectionImpact Protection

Impact Protection

3244ISEA

CUT: 3

ISEACUT: 3 4243

ISEACUT: 34343








Rig Lizard® Waterproof 2029• H2X® liner creates a waterproof layer

of defense against wet hazards






Available in sizes 7/S through 11/XXLTP-X® Technology TP-X® Technology


4244ISEA

CUT: 2




• HexArmor Mud Grip+® synthetic leather palm with PVC dots and reinforced stitching




HexArmorMudGrip+®

Impact Protection

PENDINGISEA

CUT:4






• SlipFit® cuff with Velcro® closure


Available in sizes 7/S through 12/3XLTP-X® Technology

Impact Protection

The Rig Lizard® started with the belief that PPE should protect your hands from specific workplace hazards without limiting the dexterity of your most valuable tool. Our team hit the drawing board with safety advisors from across the industry, and the result is an outstanding lineup of purpose-built, high-level PPE.

CPPT Gram Cut Score 1669 GPerformance gram force may vary 10%: lab-to-lab scores also vary

CPPT Gram Cut Score 1576 GPerformance gram force may vary 10%: lab-to-lab scores also vary

4243ISEA

CUT: 3

4543

PENDINGISEA

CUT: 4

Thin Lizzie™ Thermal 2091• IR-X® Impact Exoskeleton™ with high-flex


• High-performance polyethylene and glass fiber blend shell provides exceptional dexterity and feel

• Interior fleece lining

• Sandy nitrile palm dip

Available in sizes 6/XS through 10/XL

Thin Lizzie™ 2090• IR-X® Impact Exoskeleton™ with high-flex




Available in sizes 6/XS through 10/XL

Maple Rig™ 2032• IR-X® Impact Exoskeleton™ with high-flex







design, additional IR-X® guard between thumb and index finger


• Genuine goatskin leather palm with unique stitching pattern and cut level 4 SuperFabric® (interior layer)

• SlipFit® cuff with pull tab and Velcro® closure


Available in sizes 7/S through 12/3XLTP-X® Technology Cut 4 SuperFabric®

Impact ProtectionImpact Protection

HPPE Shell HPPE Shell


PENDINGISEA

CUT: 4ISEA

CUT: 4

877.MYARMOR | hexarmor.com Rig Lizard® I Page 27

You Do the Job that No One Else Can DoWhen we took on the mission of creating the world’s safest rescue glove, we knew we couldn’t do it alone. Building the perfect safety glove for the toughest first responders takes a lot of work, so we put it back on the hardest workers we know. We went out and asked the heroes in the field what they needed out of their rescue gloves. It’s a good thing we did; they helped us create a line of products that we are proud to call the HexArmor® EXT Rescue® Series.

877.MYARMOR | hexarmor.com EXT Rescue® I Page 29

4533

4521

4544

4532

TP-X® Patches

TP-X® Patches

ISEACUT: 5

ISEACUT: 5

4521ISEA

CUT: 5

EXT Rescue® 4012• SuperFabric® brand material palm provides





Available in sizes 6/XS through 11/XXL



• Durable TP-X® palm and fingertip reinforcements


• SlipFit® and anti-debris cuff


4542ISEA

CUT: 5

EXT Rescue®

Barrier 4014• SuperFabric® brand material palm provides


• Waterproof H2X® barrier meets ASTM F1670/F1671 for bloodborne pathogen resistance and fluid-borne viral resistance (interior liner)







• Durable TP-X® palm reinforcements





SuperFabric®

Protection Zone

Impact Protection

SuperFabric®

Protection Zone

Impact Protection

SuperFabric®

Protection Zone

Impact Protection

SuperFabric®

Protection Zone

Impact Protection

TP-X® Patches

TP-X® Patches

“We have used them in auto-ex training, auto-ex real life, rope drills, and gas powered tool use, including chainsaws. The gloves offer great dexterity and protection, allowing for the user to focus on the task at hand.... I would recommend these gloves to any of our personnel.”

- R. Gutierrez, Newport Beach, CA

The Perfect Union of Performance and ComfortThe versatile 9000 Series™ offers a line of palm-coated knit gloves, supplemented with ISEA level 5 cut-resistant SuperFabric® brand materials, and purpose-built for a variety of industrial applications. Most of the 9000 Series™ gloves feature a unique palm dip, maintaining the highest grip in varying conditions while providing increased abrasion resistance to extend product life.

9000 Series™

877.MYARMOR | hexarmor.com 9000 Series™ I Page 31

9000 Series™ 9013• SuperFabric® brand material palm provides








• Foam nitrile palm dip





• Wrinkle rubber palm dip


STEP 1Base hand file.

STEP 3Draw shape that corre-sponds to areas NOT PROTECTED on top of the green PZ vector graphic.

STEP 2Base hand file with PZ vector graphic layer - set to “multiply”, so hand is visible below color.

STEP 4Subtract the NOT PROTECTED graphic from the full coverage green PZ vectorgraphic for finalcustomizedprotection zone.Change coloras required.

SuperFabric®

Protection Zone




• Flat nitrile palm dip




• Cotton blend shell provides exceptional dexterity and feel



9000 Series™ Liner 9009• SuperFabric® brand material palm provides



• Recommended as an underglove solution


SuperFabric®

Protection Zone

HPPE Blend Shell HPPE Blend Shell

HPPE Blend Shell

HPPE Blend ShellHPPE Blend Shell

SuperFabric®

Protection Zone

SuperFabric®

Protection Zone

SuperFabric®


Protection Zone

4544ISEA

CUT: 5

4544ISEA

CUT: 5ISEA

CUT: 44541ISEA

CUT: 5ISEA

CUT: 4

4543ISEA

CUT: 5ISEA

CUT: 44543ISEA

CUT: 5ISEA

CUT: 4

4543ISEA

CUT: 5ISEA

CUT: 4

Dexterity, Durability, and Purpose-Built GripNo matter what the job, there’s a 2000 Series™ glove for your needs. Each glove in the 2000 Series™ is made with high-quality fibers, providing a high-dexterity, extremely comfortable shell that can be worn all day without causing hand fatigue. This lighty-duty line of knit gloves offers a variety of palm dips that can be used for wet, oily, and dry situations, and provides additional abrasion resistance.

2000 Series™

877.MYARMOR | hexarmor.com 2000 Series® I Page 33

2000 Series™ Flame-Resistant Liner 2083• Flame-resistant 13-gauge Kevlar®

and wool blend shell provides exceptional dexterity and feel

• Recommended as a flame-resistant underglove

• Hazard risk category HRC 1 arc flash protection (ATPV 7.7 cal/cm2, as per ASTM F2675/F2675M-13, determining arc flash rating of hand-protective devices)


2000 Series™ 2086• High-performance polyethylene

and glass fiber blend shell provides exceptional dexterity and feel





• Polyurethane palm dip


2000 Series™ 2081• 13-gauge Kevlar® and steel

blend shell provides exceptional dexterity and feel

• Wrinkle rubber three-quarter dip


2000 Series™ Flame-Resistant 2082• Flame-resistant 13-gauge Kevlar®

and wool blend shell provides exceptional dexterity and feel

• FR-compliant palm dip

• Hazard risk category HRC 1 arc flash protection (ATPV 7.7 cal/cm2, as per ASTM F2675/F2675M-13, determining arc flash rating of hand-protective devices)


2000 Series™ 2080• 13-gauge Kevlar® and steel

blend shell provides exceptional dexterity and feel



ISEACUT: 3

CPPT Gram Cut Score 1322 GPerformance gram force may vary 10%:

lab-to-lab scores also vary

Tested in accordance with the following EN407 clauses: I) 5.1 = Level 4 II) 5.2 = Level 1 III) 5.3 = Level 3 IV) 5.4 = Level 1

X4423543 412210



ISEACUT: 4 4542

ISEACUT: 4

ISEACUT: 3

4532







ISEACUT: 4 PENDING

ISEACUT: 4 3543





• Foam nitrile three-quarter dip


2000 Series™ 2089• High-performance polyethylene,

glass, and and steel fiber blend shell provides exceptional dexterity and feel


• Hi-vis color scheme












ISEACUT: 4 PENDING

ISEACUT: 4 PENDING

ISEACUT: 4 PENDING

MET

AL

| OIL

| LU

MB

ER |

EXTR

ICA

TIO

N |

STEE

L

Each product in the 2000 Series™ is constructed of various fiber blends and unique palm coatings. Glove

structures are durable, flexible, and cut resistant, offering both dexterity

and safety. Varying palm dips increase abrasion resistance, extend product life, and provide the highest

grip for a variety of applications.

Better Fit. Better Materials. Better Design...Better GlovesFrom the leader in industrial hand protection comes the Hex1® Series, because we know that not all jobs require heavy-duty safety gloves. Sometimes you just need a pair of gloves that look great, feel great, work great and last. Hex1® gloves are made with the same high-quality materials as our high-performance safety gloves and perform better than any mechanic’s glove you’ve ever worn. Whether you’re looking for impact protection, wet or dry grip, cold weather or simply a shop-glove, you’re sure to find a Hex1® to fit your needs.

877.MYARMOR | hexarmor.com Hex1® I Page 37

3131

3131

3131

3131

3131

Hex1® 2121• Back-of-thumb brow cloth

• Reinforced index finger and thumb saddle

• Synthetic leather palm with silicone print


• Nametag on palm side of cuff


Hex1® 2121-CAM• Reinforced index finger and thumb saddle


• Camo color scheme for increased concealment in covert situations




Hex1® 2120• Back-of-thumb brow cloth






Hex1® 2120-TAN• Reinforced index finger and thumb saddle


• Neutral color scheme for increased concealment in covert situations




Hex1® 2120-BLK• Back-of-thumb brow cloth







4131

Hex1® Tack Grip2122• Back-of-thumb brow cloth


• Full silicone printed palm over synthetic leather for superior grip




Hex1® Arctic 2123• Back-of-thumb brow cloth



• Digital polyurethane palm with rubber print




Hex1® Impact2125• Light back-of-hand impact protection

against bumps and tool slips



• Lightly padded goatskin leather palm with reinforced stitching




Hex1® Impact2125-BLK• Light back-of-hand impact protection




• Lightly padded goatskin leather palm with reinforced stitching





Hex1® Ultimate Impact 2130• Full back-of-hand impact protection




• Neoprene cuff with Velcro® closure



Impact Protection


3222 1132

1132 2141

MET

AL

| OIL

| LU

MB

ER |

EXTR

ICA

TIO

N |

STEE

L

The Hex1® Series was designed for general

industrial applications and purpose-built to protect you

from common workplace hazards without sacrificing

comfort and dexterity.

A Revolution in Hand Protection TechnologyHexArmor® set out with the mission of protecting workers from the constant threat of cut injuries while maintaining the dexterity and comfort that is required to perform everyday tasks. Our team was able to develop, through extensive trialing and testing, the revolutionary TruShield® technology. Our proprietary Coretek® blend of fibers creates a high-performance glove structure that is specially designed to house our SuperFabric® guard plates, creating an ASTM Level 5 cut-resistant shield on the exterior of the hand while preserving all the dexterity of an ordinary knit glove.

877.MYARMOR | hexarmor.com NXT™ Series I Page 41

NXT™ products are made with a combination of SuperFabric® brand materials and our own proprietary blend of Coretek® performance fibers. The bonding of these fabrics reduces the ability of fibers to “window,” or separate, preventing cut and puncture hazards from reaching the user’s hand.

• Exceptional performance in real-world application testing: NXT™ doesn’t have the weaknesses of standard fiber-knit products, which provide less protection from cuts and punctures when immobilized, under tension, or coated.

• Provides significantly higher abrasion resistance than standard fiber-knit products, which means higher performance longer in the product’s life.

Cut/Puncture Hazard

Fiber Windowing

Hand

Fabric Shell

Cut Injury

Standard Knit Gloves

Coretek® Shell

Cut/Puncture Hazard

SuperFabric® Armor Plates

Hand

Gloves with Protection

High-Performance TruShield® Technology

NXT™ Food Service 10-302• Coretek® fiber keeps hands cool and comfortable

• Designed to be worn under standard nitrile, latex, or vinyl glove

• 3-finger coverage targets primary area for knife strikes

• Meets European food migration testing (EN 1186:2002 SI 1998 No 1376)

• Sanitizeable

• Ambidextrous, sold in eaches

Available in sizes 5/XXS through 12/3XL

SuperFabric®

Protection Zone

Coretek® Performance Fiber

414XISEA

CUT: 5ISEA

CUT: 1

HexArmor® Introduces NXT™ 10-302 as a Solution to Cut Injuries and Compliance Employees in the deli and produce departments at a large national grocery chain were using standard Spectra® cut gloves to handle knives and change cutting blades on machinery. The gloves provided some levels of cut protection, but the fiber-based gloves were bulky, ill-fitting, and scratchy, which caused problems with getting employees to actually wear the PPE. The safety team was tasked with finding gloves that would offer a higher level of cut protection, were more comfortable, and had higher dexterity in hopes of increased employee-wear compliance.

HexArmor® was brought in to learn more about the issues at the store level and took surveys of actual end-users. The following issues were found with the Spectra® gloves:

• Too bulky and ill-fitting• Loose fingertips bunch up and get caught in

machinery or get in the way of cutting• Did not sanitize or wash well: easily

discolored, retain odor• Did not protect from accidental knife slips because

the knife tip could penetrate between the fibers

The results from the survey helped guide the recommendation to implement a large trial of the NXT™ 10-302 in the deli and produce departments.

Gloves were used in various food preparation and machine maintenance applications, and the stores saw an immediate acceptance of the NXT 10-302 as a highly comfortable solution that provided better protection than the Spectra® gloves. While using the NXT 10-302, all of the testing sites saw an increase in compliance, as well as longer usage and improved cut injury data.

44% Reduction in Cut Injuries While Using Knives and MachinesData taken from 150 stores over a period of one year was aggregated to show the effect of the HexArmor® NXT™ 10-302 on the safety records of the unit. The NXT 10-302 not only reduced cut injuries by 44% after the first year of use, but safety managers noticed an increase in compliance as the NXT 10-302 was said to be much more comfortable, flexible, and dexterous. Further trending shows injury rates will continue to drop as more and more stores adopt the NXT 10-302. The grocery chain we worked with has purchased more than 75,000 units over the first year of implementation.

HexArmor® was able to impact the safety program at this large grocery chain because of the following:

• Higher cut resistance: exceeds ISEA and CE Level 5• Protection from knife slips and pointed kitchen

hazards provided by SuperFabric® guardplates• High dexterity and comfort in a

13-gauge lightweight shell• Washes better than the competition

and is easily sanitized

Reducing Hand Injuries in National Grocery Chains

FOO

D S

ERV

ICE

| PR

OCE

SSIN

G |

IND

UST

RIA

L

“I like these gloves (NXT™ 10-302) better than the old ones (Spectra). I feel safer and don’t have to worry

about the extra material in the fingers getting caught in the slicer.”

- Deli Department Employee

Stop Needles and ThornsFor serious gardeners, hobbyists and professional landscapers, ThornArmor® gives workers the ability to pick up and move cactus and thorny bushes by hand without having to worry about harmful pokes. Three layers of SuperFabric® brand material are built into ThornArmor® gloves, creating a highly puncture-resistant palm lining that acts as a barrier between your hands and sharp thorns and needles.

877.MYARMOR | hexarmor.com ThornArmor® I Page 45

NEW!

ThornArmor® 3092• Three layers of SuperFabric® brand

material in the palm and partial index finger wrap (interior layer)

• Breathable HexVent® panel on the back-of-hand helps keep you cool

• Synthetic palm material

• Airprene cuff with Velcro® closure

• Reinforced fingertips

Available in sizes 5/XXS through 11/XXL

ThornArmor® 3090• Three layers of SuperFabric® brand

material in the palm (interior layer)

• Particle nitrile coating provides a liquid-resistant barrier while providing enhanced grip

• Extended canvas cuff

Available in sizes 7/S through 10/XL

PENDINGISEA

CUT: 5 PENDINGISEA

CUT: 5

3 Layers SuperFabric® Protection

Protective Shell


Your Ultimate Defense Against Needles and ThornsIntroducing the first heavy-duty cactus landscaping gloves: the ThornArmor® 3090 and the ThornArmor® 3092. Brought to you by the industry leader in needlestick protection, the ThornArmor® series by HexArmor® uses innovative technology to defend against needles and thorns. Say goodbye to the days of wrapping up cactus with carpet and newspaper or using rope to move these plants around.

For professional landscaping contractors, ThornArmor® gives workers the ability to pick up and move cactus by hand, without having to worry about harmful pokes. And for the serious DIY gardener, these are the same professional-grade tools the best horticulturists use.

Three layers of SuperFabric® technology create a highly puncture-resistant barrier between your hands and sharp thorns and needles.

The Only Proven Needlestick SolutionThe methods by which needlestick-resistant products are tested in a laboratory often fall short of the actual dangers involved with handling used needles on the job. The few standards that are available for puncture testing, such as the EN388 and the ASTM 1342, do not accurately replicate the fine points of 25-gauge medical needles, nor do they account for odd angles of entry. In order to validate HexArmor® gloves as the most needlestick-resistant PPE available, HexArmor® researchers adapted available testing methods to account for the material’s superior level of performance. Learn more about new and existing needlestick tests on pages 48-49.

877.MYARMOR | hexarmor.com Needlestick Resistant I Page 47

Leather Tactical Enforcement 4046• SuperFabric® brand material provides

industry-leading needlestick resistance (in noted enhanced areas)

• Kevlar® liner for back-of-hand protection

• Premium goatskin leather

• Slipfit® cuff


Sharpsmaster HV™

7082• SuperFabric® brand material provides


• Single-glove needle solution with incredible dexterity and comfort

• Flat nitrile three-quarter knuckle dip


PointGuard® X 6044• SuperFabric® brand material provides


• Recommended use as an underglove solution with appropriate top-glove combination

• Lightweight spandex shell with elastic wrist

Available in sizes 5/XXS through 11/XXL

NSR 4041• SuperFabric® brand material provides


• Back-of-hand knuckle padding for incidental bumps/impact

• Comfortable memory span liner

• Silicone dot palm grip



Search & Duty 4045• SuperFabric® brand material provides


• AirMesh™ breathable back-of-hand



Hercules NSR 3041• SuperFabric® brand material provides


• Full coverage design and pre-curved shape for maximum comfort and protection

• Silicone dot palm grip









Protective Liner

SuperFabric®


Protection Zone

4522ISEA

CUT: 5 4522ISEA

CUT: 5

4532ISEA

CUT: 5

4533ISEA

CUT: 54523ISEA

CUT: 5

4522ISEA

CUT: 5ISEA

CUT: 3

The precise cost of needlestick injuries is difficult to quantify. According to the American Hospital Association, one case of serious infection by blood-borne pathogens can add up to $1 million or more in expenses for testing, lost work time, and disability payments. Even when no infection occurs, the cost to organizations is estimated to be more than $3,000 per injury for testing, counseling, and time off work.

HexArmor® sets the industry standard for needle protection with solutions for a variety of applications. Our needlestick-resistant products do more than simply pass industry-accepted testing methods; we put them through real-world applications countless times, with a history of undeniable success. The accepted standards of testing do not account for the many variables employees face on the jobsite, so we created our own tests, mirroring the conditions and hazards that our users face.

8” Needle-Resistant Arm Guard AG8TW• SuperFabric® brand material provides

industry-leading needlestick resistance

• Won’t fall down like knit sleeves

• Spandex wrist insert with thumb hole and snap fasteners


Sharpsmaster II® 9014• SuperFabric® brand material provides


• Cotton blend shell provides exceptional dexterity and feel

• Wrinkle rubber palm dip with Actifresh™ antimicrobial treatment




4544ISEA

CUT: 5 4512ISEA

CUT: 5

HexArmor® needlestick-resistant products work by layering SuperFabric® materials over each other.

Our needlestick products are tested in countless real-world applications, making them the most-proven needlestick solution available on the market.

Don’t Get Stuck with Faulty Hand Protection

WA

STE

| REC

YCLI

NG

| LA

W |

MU

NIC

IPA

LITI

ES

“The best hand protection on the market.”

– Regional Safety Manager, Large U.S. Waste Handler/Recycler

The New ASTM F2878 Test For years the EN388 and ASTM 1342 were the main tests used for measuring puncture resistance for PPE. The shortcoming of the EN388 and ASTM 1342 tests is that they do not replicate real-world puncture hazards such as needles, slivers, burrs, frayed wire, wire rope, or glass shards.

Is the Truth in the Test?The reason that these tests are not relevant for puncture is simple. The test probe for the EN388 test is rounded and blunt, larger than the end of a ballpoint pen. The test measures more of a tear, or burst hazard, but has almost no relevance when it comes to needle or industrial testing. The test probe for the ASTM 1342 is thinner and more pointed than the E388 probe, but it still does not come close to replicating a needlestick hazard.

According to a March 11, 2011, ASTM Newsroom Press Release (#8815), this is an issue that the standards committees and other manufacturers recognized: Due to risk of infection from blood-borne pathogens such as human immunodeficiency virus and hepatitis C, hypodermic needles pose a life-safety risk to healthcare professionals, law enforcement officials, sanitation workers, and others. A new ASTM International standard addresses the unique mechanics of hypodermic needle puncture as related to protective clothing. ASTM F2878, Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture, was developed by Subcommittee F23.20. Subcommittee F23.20 focuses on Physical properties and testing, and is part of the ASTM International Committee F23 on Personal Protective Clothing and Equipment.

“Over the past several years, a number of new protective equipment technologies have been developed to prevent needlestick injuries; however, there has been no standardized test method available for technology developers and users to reference when conducting comparative analysis,” says John Cronin, product manager, Warwick Mills Inc., and an F23 member. “With the publication of ASTM F2878, there is now an appropriate method for conducting comparative analysis of hypodermic needle puncture resistance.”

HexArmor® and New ASTM F2878 TestingHexArmor® has long understood the shortcomings of puncture tests and has been testing using a modified ASTM 1342 test with 25-gauge hypodermic needles. With the new ASTM F2878 test, we are now able to standardize testing based on international standards.

From left to right: EN388 Probe, ASTM 1342 Probe, 25G needle, ballpoint pen

Puncture and Needle Testing Clarified

*The newton is the Standard International unit of force. One newton is the force required to cause a mass of one kilogram to accelerate at a rate of one meter per second squared in the absence of other force-producing effects. We have converted newtons to grams.

Overview of the ASTM F2878 Test• Testing can be done using a 21G, 25G, or 28G needle • The following tests used a 25G needle• Puncture probe (25G needle) travels at a 90˚ angle

into a specimen at a velocity of 500mm/min• Amount of force necessary to puncture

through the material specimen is recorded in newtons* to the nearest .01 N

• This test is done 12 times for every specimen• The average of the 12 results is reported

The ResultsWe tested our needlestick and puncture-resistant gloves, as well as competitive gloves, using the ASTM F2878 methodology, producing the following results:

00

Newtons

2.0

4.0

6.0

8.0

10.0

00

Gram

s of N

eedl

e Re

sist

ance

200

400

600

800

1000

TilsetecAG

TurtleskinInsider

TurtleskinFull Coverage

1.4mmLeather

SuperiorDynastop

InterlockCotton

HexArmor® 6044

HexArmor® 9014

HexArmor® 7082

ASTM-F2878 Needle Resistance Comparison

Our needlestick–resistant gloves and arm guards aren’t just lab tested, we test them with actual 25-gauge needles to give you maximum protection and peace of mind.

877.MYARMOR | hexarmor.com Needlestick Testing I Page 51

The Toughest, Most Durable Gloves on the MarketSome job sites require more protection – they demand the strongest, toughest, and most resilient safety gloves. HexArmor® has spent many years on sites like this – it’s how we created the heavy-duty line of products. Built to handle the most extreme occupational hazards, HexArmor® heavy-duty gloves are built from the inside out, with proprietary SuperFabric® brand materials, giving each glove Level 5 cut resistance and industrial puncture resistance. We put everything we have into building our heavy-duty line of safety gloves, and the result is purpose-built PPE you can trust.

Heavy Duty

877.MYARMOR | hexarmor.com Heavy Duty I Page 53

SteelLeather® IX5039• SuperFabric® brand material

provides 360˚ ISEA and CE Level 5 cut resistance (interior layer)

• Industrial puncture protection on enhanced areas protects against wires, metal, wood, and glass

• Premium split cow leather

• Canvas safety cuff


Arctic Mitt 4050• SuperFabric® brand material palm provides

ISEA Level 5 cut resistance (interior layer)

• Hipora® and G150 thinuslate liners keep hands warm and dry


• Additional light padding underneath Impact Exoskeleton™ for extra impact resistance

• Durable TP-X® palm for oil-resistant grip

• Cinched cuff with reflective tape and drawstring cord for a snug fit

• Inner glove can easily be removed for cleaning


SteelLeather® III 5033• SuperFabric® brand material palm provides




• Premium cow grain leather

• SlipFit® cuff


Hercules™ 400R6E• SuperFabric® brand material provides

360˚ ISEA/CE Level 5 cut resistance


• Gauntlet design and pre-curved shape for maximum comfort and ultimate protection

• Silicone palm grip

• Extended gauntlet style cuff

Available in sizes 8/M through 11/XXLSuperFabric®


Protection Zone

SuperFabric®


Protection Zone

4533ISEA

CUT: 5 PENDINGISEA

CUT: 5

4532ISEA

CUT: 5 4544ISEA

CUT: 5

Case Study: SteelLeather® III 5033 Saves a Worker’s FingerWhile replacing a steam valve in a manufacturing site, a maintenance worker was exposed to a nail on a wooden crate. The worker accidentally grabbed the crate where the nail was protruding. The nail punctured through the leather on the middle finger but was stopped by the protective liner in the HexArmor® SteelLeather® 5033 glove. The nail ripped the leather shell but did not puncture the protective layer of SuperFabric® material. HexArmor® saved the worker from serious injury, allowing the worker to continue the workday.

Impact Protection

ISEA 105PENDING

ISEACUT: 5

HeatArmor® 8100/HWT8100• SuperFabric® brand material provides 360˚


• Rates CE Level 2 for contact heat, up to 250°C

• Level 5 ISEA 105 in accordance with ASTM 1776, 320˚C (HWT8100)

• 13 oz. cotton shell, burlap lining (HWT8100)

• Extended canvas safety cuff

Available in sizes 8/M through 10/XL

BladeMaster®

Ultimate 8020• SuperFabric® brand material palm provides



• 7G Kevlar® knit shell


• Leather palm with reinforced stitching


SuperFabric®

Protection Zone

Protective Shell

SuperFabric®

Protection Zone

TenX Threesixty7090• SuperFabric® brand material palm provides



• Updated construction with increased dexterity, better fit and feel

• Particle nitrile coating for liquid resistance


Available in sizes 7/S through 10/XLProtective Shell

SuperFabric®

Protection Zone

4544ISEA

CUT: 5

Bandit® 5040• SuperFabric® brand material palm provides


• Premium cowhide leather

• Critical seams reinforced along thumb and bottom edge for extra protection



SuperFabric®

Protection Zone

4544ISEA

CUT: 5

MET

AL

| OIL

| LU

MB

ER |

EXTR

ICA

TIO

N |

STEE

L

Bring on the heat, bring on your toughest hazards. Our HeatArmor®

8100/HWT8100 is the hottest innovation in cut-resistant

hotmill hand protection. Gloves provide full-coverage ISEA and

CE Level 5 cut resistance, without sacrificing comfort or dexterity.

Armor Up!No more snags, punctures, abrasions, or cuts to your arms and torso. HexArmor® industrial aprons and body protection outperform, outlast, and fit better than the competition. HexArmor® body protection exceeds the industry’s highest testing standards – ISEA Level 5 – giving you the protection you need most, where you need it.

Made in USA

Arm & Body Protection

877.MYARMOR | hexarmor.com Arm & Body Protection I Page 57

9” Arm Guard AG10009V• SuperFabric® brand material provides

ISEA Level 5 cut resistance


• Spandex wrist insert with thumb hole

• Adjustable Velcro® closure design


9” Arm Guard AG10009S• SuperFabric® brand material provides

ISEA/CE Level 5 cut resistance


• Spandex wrist insert with thumb hole


4532ISEA

CUT: 5ISEA

CUT: 5

SuperFabric® Protection Zone


“We’ve been using HexArmor® arm guards for almost three years without an injury. Recently, a HexArmor® rep came through the plant. He asked how long they were lasting until we had to replace them, and we told him, ‘We haven’t yet!’”

- Frank M., Safety Manager, Major Steel Plant

19” Arm SleeveAS019S• SuperFabric® brand material provides



• Neoprene thumb loop and sleeve clip keeps sleeve from falling


9” Arm Guard AG9X• SuperFabric® brand material provides



• Extended cuff with Neoprene thumb loop and Velcro® closure


4532ISEA

CUT: 5ISEA

CUT: 5



PentaArmor® 1010• SuperFabric® brand material provides


• Elastic thumb loop and sleeve clip keeps sleeve from falling

• Hi-vis color scheme for visibility

Available in sizes 7/S through 12/3XL4521ISEA

CUT: 5


PentaArmor® 1010 vs. Standard Competitive Sleeves

Kevlar® Dyneema® Composite PentaArmor®

Cut Level 600 Grams 800 Grams 4200 Grams

Number of employees 100 100 100

Cost per sleeve $3.50 $9.75 $32.99

Lifespan in weeks 1.5 3.5 26

Monthly cost/employee $20.22 $24.14 $11.00

Annual cost/employee $242.67 $289.71 $131.96

Total annual cost $24,266.67 $28,971.43 $13,196.00

Many arm and body protection products on the market will rate around a Level 1-2 on the ASTM F-1790 test (around 400 grams), which won’t protect workers from sharp edges, burrs on sheet metal, or metal castings. The limitations of leather, Kevlar®, and Dyneema® are that they offer little cut or puncture resistance. They may receive a “cut rating” on the industry standard but will fail in the field when exposed to normal work.

Be aware of the differences between the two tests to measure the cut resistance and protective qualities of materials. At HexArmor®, we favor ANSI/ISEA 105-2011 testing methods when evaluating PPE. Our competitors often use CE ratings to boost the perception of cut resistance with data that just doesn’t match up with tough ANSI/ISEA ratings. Our method of testing, the stringent ASTM F1790-97, applies a more difficult method that makes it harder to achieve higher ratings. By putting our PPE against the most rigorous testing available in the industry today, we are able to design and engineer better-performing products with a greater level of protection, for you and your body.

0

500

1000

1500

2000

2500

3000

3500

4000

4500

leat

her

kevl

ar®

HexA

rmor

body

prot

ectio

n

dyne

ema®

gram

s

body protection product

Test

: AST

M 1

790-

97

Tested Using the Industry’s Highest Standards

AR

MO

R U

P! |

AR

MO

R U

P! |

AR

MO

R U

P!

It’s now possible to increase arm safety by 800% and reduce

costs by 50% with a product that is lightweight, breathable,

and comfortable to wear.

ISEACUT: 5

ISEACUT: 54534

AP322

24” x 30” ApronAP321/322• SuperFabric® brand material provides



• Medium weight (single layer, AP321)

• Heavy weight (double layer, AP322)

One size fits most



20” x 22” ApronAP102222• SuperFabric® brand material provides



• Heavy duty (double layer)

One size fits most

20” x 30” Apron AP229• SuperFabric® brand material provides



• Medium weight (single layer)

One size fits most

4532ISEA

CUT: 5



20” x 30” ApronAP102229• SuperFabric® brand material provides




One size fits most

4534ISEA

CUT: 5

HexArmor® body protection exceeds the industry’s highest testing standards – ISEA Level 5 – giving you the protection you need most, where you need it. No other competitive product comes close.

ISEACUT: 5 4532 4534

ISEACUT: 5

36” Apron AP361• SuperFabric® brand material provides



• Double layer belly patch

• Split leg design

One size fits most




24”x 38” ApronAP382• SuperFabric® brand material provides




One size fits most

877.MYARMOR | hexarmor.com Arm & Body Protection I Page 61

ISEACUT: 5

ISEACUT: 5

ISEACUT: 5 4532 4534

9911/9915 9919

HexJacketHAJ01/HAJ02• SuperFabric® brand material provides



• Heavy duty double layer (HAJ02)

• Reflective tape (optional)

• Also available in hi-vis


Visit HexArmor.com for sizing instructions

Leg Gaitors 9921• SuperFabric® brand material provides



• Front-to-back leg coverage

• Reflective strip for visibility

• Additional layer options available upon request





HexMat 9905/9907• SuperFabric® brand material provides


• Ideal solution for working with rough surfaces and shattered/broken hazards

• Pliable material fits anywhere you need protection

Available in sizes 20”x 45” (9905), 50”x 30” (9907)

Chaps 9911/9915/9919• SuperFabric® brand material provides



• Front-to-back leg coverage

• Three layers of protection on knee (front only, 9911)

• Reflective strip for visibility

Available in sizes 9/L through 12/3XL

ISEACUT: 5

HI-VIS OPTION

KEEP YOUR

OUT HERE IT’S BEST TO

Cooling Apparel TechnologyColdRush™ personal cooling system from HexArmor®, made with eVapora™ technology, is a quick absorbing material which retains moisture and slowly allows it to evaporate, creating a cooling effect on the skin. Made for high temperature work environments or extreme physical activity, ColdRush™ will keep you and your workers cool all day long.

www.coldrush.com

877.MYARMOR | hexarmor.com ColdRush™ I Page 63

NEW!

ColdRush™ Du Rag• eVapora™ cooling technology

• Lightweight material wicks away sweat (95% PVA, 5% polyester inside, 100% cotton outside)

• PVA flap designed to lay on neck, which is a prime cooling zone

• UV protection

• Machine washable

One size fits most

ColdRush™ Hard Hat Insert• eVapora™ cooling technology

• Lightweight material wicks away sweat (95% PVA, 5% Polyester)

• Attaches to inside of hard hat with Velcro® straps


One size fits most

ColdRush™ Towel• eVapora™ cooling technology



One size fits most

ColdRush™ Bandana• eVapora™ cooling technology

• Lightweight material wicks away sweat (95% PVA, 5% polyester inside, 100% cotton outside)

• UV protection


One size fits most

ColdRush™ Neck Band• eVapora™ cooling technology

• Marine grade snaps


• UV protection


One size fits most

Lime 30105

Lime 30401

Blue 30100

Blue 30400

Hi-vis 30102

Orange 30101

Orange 30403

Pink 30106

Pink 30402

Available colors:

Available colors: Available colors:

Available colors:

Available colors:

Lime 30204

Orange 30201

Pink 30205

Blue 30200

Apply water toeVapora™ material.

Material absorbs andretains moisture.

Retained moisture and air flowprovides continuous cooling actionwhen in contact with skin surface.

How ColdRush® Works:

Lime 30152

Orange 30150

Blue 30151

Lime 30301

Orange 30302

Pink 30303

Blue 30300

COOLING ZONE

COOLING ZONE

COOLING ZONE

COOLING ZONE

COOLING ZONECOOLING ZONE COOLING ZONE

COOLING ZONECOOLING ZONE

COOLING ZONE

Patent Pending

Give Disposable Booties the BootSay goodbye to dirt and grime and say hello to YULEYS® from HexArmor®, the reusable, slip-on boot cover that’s helping even the dirtiest jobs clean up their act. The typical disposable booties are slippery and expensive, and after spending one day on the job, they spend a lifetime in a landfill. YULEYS® can be easily slipped into and used thousands of times, while providing greater traction and protecting floors and walls.

Fast. Cost Effective. Clean.

Save money by replacing disposable booties with YULEYS® reusable work boot covers. On average, a box of disposable booties costs $10 for 100 pairs. If 1 worker enters a residence an average of 7 times a day, that would be $.70 per day; multiply that by 5 days a week, and you’ve got $3.50 per week. Multiply that by 48 working weeks a year, and your grand total is $168/year per worker.

Leaner. Cleaner. Greener.

Millions of booties are disposed of every day. YULEYS® work as hard as the people who wear them, and are built for heavy use. If they ever need to be replaced, they can be easily recycled and given another life.

877.366.5436 | yuleys.com YULEYS® I Page 65

YULEYS®

Clean Step System• Hands-free on-and-off

• Heel-lock system

• Flexible design

• Anti-slip tread

• Specifically designed for steel-toed boots

• Recyclable, reduces effects on landfills

• Available in standard TPR and industrial-grade SEBS rubber

• Available in blue, gray, and redVisit YULEYS.com for sizing

NEW!

Industrial-Strength Footwear for Any Industry

These industrial-grade work boot covers are a perfect fit for in-home service workers, industrial workers entering sanitary work areas, food prep and agriculture, and people working in clean rooms and sterile environments. Save yourself the time of taking off your boots, or the cost and inconvenience of going through boxes of disposable booties, and take a step in the right direction.

Stay Safe and Stay DryIf you’re working with oils, muds, and other liquids all day long, you know how uncomfortable it can be to wear saturated gloves. Not only is it unpleasant, but some substances can cause skin irritation or allergic reactions. The HexArmor® liquid/chemical resistant series was developed to keep oils, muds, and other liquids out of the glove and away from your hand, all day long, so you can work safe while staying dry.

877.MYARMOR | hexarmor.com Liquid/Chemical-Resistant I Page 67

NEW!

The Mudder™7300• IR-X® Impact Exoskeleton™ protects

against forceful blows to the back of hand

• PVC coating provides a liquid-resistant barrier while providing enhanced grip

• 17” extended gauntlet-style cuff

Available in sizes 9/L through 11/XXL

The Mudder™7302• IR-X® Impact Exoskeleton™ protects against

forceful blows to the back of hand


• Knit cuff

Available in sizes 8/M through 11/XXL

3121

PENDING3121

Liquid/Chemical-Resistant 7200• EN374 certified for chemical resistance

against methanol, sodium hydroxide 40%, and sulfuric acid 96%

• Full-coverage design provides 360˚ cut resistance (CE Level 5, ISEA Level 4)

• Textured PVC dip

• Extended gauntlet-style cuff


The Mudder™7301• IR-X® Impact Exoskeleton™ protects against

forceful blows to the back of hand


• 12” extended gauntlet-style cuff

Available in sizes 9/L through 11/XXL

ISEACUT: 4

High-PerformanceProtective Material

Impact Protection

Impact Protection

Impact Protection

4542 AKL

No Wet. No Wind. No Sweat.HexDri® by HexArmor® provides the same protection from the elements you expect from rubber gloves, but keeps your hands comfortable because they’re breathable, too. Proprietary H3O® technology used in HexDri® work gloves keeps water and wind out of the glove and away from your hands, while the back-of-hand fabric simultaneously wicks away sweat and moisture from the inside of the glove.

Waterproof Breathable Gloves with Technology

877.MYARMOR | hexarmor.com HexDri® I Page 69

Say Goodbye to Soggy, Waterlogged Hand ProtectionThe problem with most “waterproof” gloves is that they get their water barrier from a liner on the inside of the glove. So when the glove gets wet, the outer layer absorbs the liquid, making the glove bulky, heavy, and stretched out. This compromises grip and dexterity, making it hard to do your job.

HexArmor® created HexDri® to solve this problem. Proprietary H3O® technology used in HexDri® work gloves keeps water and wind out of the glove and away from your hands, while the back-of-hand fabric simultaneously wicks away sweat and moisture from the inside of the glove. And the coated palm provides exceptional grip in wet environments, without sacrificing dexterity or tactile sensitivity.

If you’re working in an environment with wet conditions, there’s only one series that is guaranteed to be “no wet, and no sweat.” It’s the HexDri® with H3O® technology, only from HexArmor®.

Traps Sweat and Heat

Bulky Construction

Waterlogged Outer Layers

Standard Waterproof Mechanic’s Style Gloves


Releases Sweat and Heat High Dexterity Design

HexDri® Gloves by HexArmor® with H3O® Technology

Stiff Material Comprimises Dexterity

Standard Waterproof Rubber Gloves

Waterproof

Windproof


Bulky Construction

Waterlogged Outer Layers

Standard Waterproof Mechanic’s Style Gloves


Releases Sweat and Heat High Dexterity Design

HexDri® Gloves by HexArmor® with H3O® Technology

Stiff Material Comprimises Dexterity

Standard Waterproof Rubber Gloves

Waterproof

Windproof

COMING SOON!

HexDri®

2180• H3O® technology keeps water and wind out

of the glove and away from your hand

• Breathable back-of-hand material allows sweat to evaporate

• High dexterity, pre-curved design


• Neoprene cuff with Velcro® closure


HexDri®

2182• H3O® technology keeps water and wind out

of the glove and away from your hand

• Breathable back-of-hand material allows sweat to evaporate

• High dexterity, pre-curved design

• PVC palm dip

• SlipFit® cuff

Available in sizes 8/M through 11/XXL

Protected by European patent 2,173,206 and other patents pending

Glove Sizing Guide

Industrial gloves fit differently than most gloves, because of the materials used to provide protection. We recommend using our size charts and reviewing glove descriptions and materials, and if you are still uncertain about what size would best fit your hand, give us a call at 1-616-459-4144.

Measure Your Hand (Recommended)

Using a string or measuring tape, measure the circumference around the knuckles, excluding the thumb. Your hand should be open with the fingers together. Compare this measurement to the chart on the right to determine your glove size.

Or, Place Your Hand on the Chart Below

Place your right hand on the glove chart so that the saddle of your thumb and index finger line up with the X. The measurement closest to the right edge of your hand will be the appropriate glove size.

Hand Circumference HexArmor® Size

5 in. (12 cm) - 6 in. (15 cm) 5/XXS

7 in. (18 cm) - 7 1/2 in. (19 cm) 6/XS

7 1/2 in. (19 cm) - 8 in. (20 cm) 7/S

8 in. (20 cm) - 8 1/2 in. (21 1/2 cm) 8/M

8 in. (21 1/2 cm) - 9 in. (23 cm) 9/L

9 in. (23 cm) - 10 in. (25 cm) 10/XL

10 in. (25 cm) - 11 in. (28 cm) 11/XXL

11 in. (28 cm) - 12 in. (30 cm) 12/3XL

Thumb

5/XXS

Chart Should Be 7 1/2 in. (19 cm)

6/XS 7/S 8/M 9/L 10/XL 11/XXL 12/3XL

Inde

x Fin

ger

Arm & Body Protection

You may need to order one size larger when wearing arm guards over shirt sleeves, in which case we recommend measuring over your clothes. Having someone assist you will ensure accurate measurements.

How to Measure

Neck: Measure the circumference where a standard button-down type collar would be fastened.Bicep: Measure around the widest part, a few inches below the shoulder.Chest: Measure the circumference at the fullest point, keeping the tape horizontal around the body.Sleeve length: Measure the distance from the prominent bone in the center on the back of the neck, across the shoulder, over the bent elbow, to the wrist bone.

NECK

BICEP

WRIST

CHAPS

GAITORS

SLEEVE

CHEST

11/XXL

Length 14”Wrist 11.5”Bicep 16.5”

Length 13.5”Wrist 13.5”Bicep 17”

Length 23”Wrist 11.75”Bicep 23”

n/a

Inseam 28”Thigh 35”Ankle 30”

Inseam 19”Calf 24”Ankle 24”

Neck 19”Chest 50-54”Sleeve 36”

12/3XL

n/a

n/a

Length 24.25”Wrist 12.25”Bicep 24.25”

n/a


n/a

n/a

9/L


Length 12.5”Wrist 11”Bicep 14”


Length 19”Wrist 9.5”Bicep 19“

Inseam 24.4”Thigh 26”Ankle 24”



7/S




Length 16.75”Wrist 7”Bicep 14.75”


n/a


8/M



Length 21”Wrist 9”Bicep 16.5”





Product

AG8TW

AG10009S, AG9X

AS019S

1010

Chaps

Gaitors

HexJacket

10/XL








NECK

BICEP

WRIST

CHAPS

GAITORS

SLEEVE

CHEST

11/XXL



Length 23”Wrist 11.75”Bicep 23”

n/a




12/3XL

n/a

n/a


n/a


n/a

n/a

9/L




Length 19”Wrist 9.5”Bicep 19“




7/S




Length 16.75”Wrist 7”Bicep 14.75”


n/a


8/M



Length 21”Wrist 9”Bicep 16.5”





Product

AG8TW

AG10009S, AG9X

AS019S

1010

Chaps

Gaitors

HexJacket

10/XL








877.MYARMOR | hexarmor.com Sizing Guide I Page 71

As simple as the industry may try to make it sound, there remains an unsettling level of confusion in the cut-resistant glove market. With multiple 1-to-5 rating scales, a variety of acceptable or certified standards and methods, differing testing methods, and a slew of acronyms associated with the testing, safety managers may find themselves overwhelmed when sifting through potential cut-resistant PPE.

But there is one thing that is met with general agreement in the hand-safety industry: not all cut-resistant gloves are created equal. With this in mind, it becomes vitally important that those making the PPE purchase decisions be fully informed on the cut-resistant products available to them.

Here is what you need to know about cut testing standards and how they apply to your safety program:

The United States Uses the ISEA/ANSI-Accepted Standards, While Europe Uses the CEN Certification However, many gloves sold in North America will indicate both testing results. Keep in mind that the ISEA (International Safety Equipment Association)/ANSI (American National Standards Institute) is a committee of manufacturers and suppliers of safety equipment, as well as a group of standardization societies, which have appointed a standardized test for cut-resistant materials. On the other hand, the CE (Conformité Européenne) marking of a glove is an actual certification, verifying a product has been properly tested, and the test results properly reported. Many manufacturers in North America will seek CE compliance, as it is required in Europe and other parts of the world.

ISEA/ANSI Accepts the ASTM Cut Test Standard, While the CE Certification Accepts the EN388 and ISO Test Standards

While both parties report cut resistance on a numerical scale from Level 1 to Level 5, there are differences in these scales. A glove with ISEA/ANSI Level 3 cut resistance may not necessarily test at Level 3 on the CE method. The reason for this difference in the rating scale is the difference in accepted testing methods:

• The ASTM F1790 measures the weight in grams needed to cut through a material when applied to a razor blade, tested over a distance. Thus, each cut from 1 to 5 denotes a specific range of weight, in ascending order.

• The EN388 Coup testing method is constructed much differently; it counts the rotations needed for a circular blade to cut through a material while moving laterally across the material under one constant weight. The count is indexed by use of a “control” fabric, such as standard cotton. This indexed value is then converted to a simple cut level, ranging from Level 1 to Level 5.

• However, the EN388 Coup test is not recommended for materials with high levels of cut resistance, as these materials can easily dull the blade and skew the results. For CE Cut Levels of 4 and 5, an alternate test is proposed – the ISO 13997. Similar to the ASTM F1790, it measures the force needed to cut a material by way of a straight blade being moved across said material. The result is measured in newtons, which is directly translated to cut resistance.

More information on each of the tests listed can be found on these websites.

• www.astm.org • www.iso.org • www.cen.eu

Cut Score Comparison

00

Gram

s of C

ut R

esis

tanc

e

500

1000

1500

2000

2500

3000

3500

4000

4500

Level 1 Level 2 Level 3 Level 4 Level 5

Test

ing

done

thro

ugh

all m

ater

ials

on p

alm

, incl

udin

g ad

ded

patc

hes.

Ba

r rep

rese

nts m

inim

um g

ram

ratin

g to

ach

ieve

eac

h le

vel.

U.S. Standard ANSI/ISEA Levels

CE-EN388 Coup Test, Levels 1-3Approximate resistance converted to Grams

CE-EN388 ISO 13997, Levels 4-5Resistance converted to Grams

HexA

rmor

Cut Score Comparison

The ASTM F1790-97 Varies Slightly From the ASTM F1790-05

Prior to 2004, a cut length of 25mm was required when performing the test; the specifications have since been updated to require only 20mm. The update was made so that both the Tomodynamometer (TDM) and Cut Protection Performance Tester (CPPT) testing machines would be comparable. Be certain when comparing data that the same test is used for each product in the comparison.

North American Manufacturers and Distributors Are Not Required to Certify Their Cut Resistance

As the CE is the only certification-requiring body, vendors of safety gloves in North America are able to sell gloves without ever testing them for cut resistance. If they elect to test them for cut resistance, they are able to use any method they choose.

Furthermore, the CE certification does not require the ISO 13997 for highly cut-resistant materials, but only recommends it. As such, a manufacturer of PPE in North America could feasibly run the EN388 Coup test on a cut-resistant material and, due to the nature of the test, return dramatically inaccurate results that portray the material to be far more resistant to cuts than it is in actuality.

It is extremely important to gather information both about the material used in PPE, as well as the methods by which it is tested, before continuing with a purchase decision.

Test Results From Various Tests Are Not Easily Interchangeable Though many manufacturers will demonstrate the CE cut tests as a function of weight or force, this conversion is only a rough estimate of how the material will perform. Each test and testing standard is different in the way that it is performed and, thus, will only be loosely comparable by way of reporting results.

The Employer Is Ultimately Responsible for Providing PPE That Meets Employees’ Needs

Per OSHA regulations, the final burden of responsibility concerning cut resistance falls on the employer. Though testing regulations and certifications are a viable starting point for a purchase decision process, they are never to be taken as a validation of the inherent protection offered to an employee.

Cut-Resistant PPE Manufacturers and Suppliers Can Provide Further Understanding of Cut Testing

Ask questions and seek thorough explanations for the methods that they have selected to test their products.

• Safety directors are encouraged to work with other industry professionals in analyzing the cut hazards in a given task, creating a practical testing method to verify the protection offered by PPE, and testing many different kinds of PPE in real-life situations.

• Cut resistance does not always mean cut safety! Many products that resist blades will still subject employees to variably shaped sharp hazards, as well as lacerations that begin with a puncture. Testing a material against worksite hazards is vital to the success of a PPE program.

Linear Blade Movement

Rotating & Linear Blade Movement

Variable Load

Fixed Load

CPPT-ASTM-F1790 Test U.S. Standard

EN388-COUP Test European Standard

Conductive Strip

Fabric Sample

Conductive Strip

Fabric Sample

Linear Blade Movement

Rotating & Linear Blade Movement

Variable Load

Fixed Load

CPPT-ASTM-F1790 Test U.S. Standard

EN388-COUP Test European Standard

Conductive Strip

Fabric Sample

Conductive Strip

Fabric Sample

877.MYARMOR | hexarmor.com Cut Testing I Page 73

What to Do When Evaluating GlovesReal-world applications are different from cut tests done in a lab. Even cut tests may vary by using different methods and producing different results. When people hear the words “cut and puncture resistant,” most will have a tendency to want to do their own informal testing. Often they will put the glove on a hard, flat surface and run a sharp instrument over the surface of the glove to test for cut resistance. We do not encourage customers to test in this manner. Although testing with a knife or other sharp object on a hard surface like a table may seem like a good testing method, in reality it is not and has little semblance to real-world applications. Each HexArmor® product is unique, with unique cut, puncture, tear, and abrasion properties. We encourage testing using actual hazards in a manner that best represents real-world situations, WITHOUT anyone’s hand in the glove. If you have any questions about testing, or would like to talk to us about testing, please contact us.

Abrasion resistance is also a critical factor in preventing hand injuries. In fact, if a glove fails too early due to wearing through from an abrasive hazard, the skin is quickly exposed to cut hazards. So the higher the abrasion level, the higher the level of protection from not just abrasion but from cut and punctures.

Stability. Evaluate performance of a new glove versus a glove that has been worn for a day. Look for products that don’t degrade when exposed or used. Some products are affected when subject to abrasion, washed, or exposed to UV light. Many products on the market lack the ability to provide consistent performance.

Windup, all occurrences. Some materials can be caught in machine parts such as rotating grinding wheels or drills and sanding materials. This can pull the hand or finger into the equipment and cause severe injury to tendons, muscles, and ligaments. Protective gloves that prevent or reduce windup risks are available and can be used where risks are present.

Fit plays a part in the level of protection. Gloves that are too tight may cut easier because many of the fibers used for cut resistance use a rolling action to increase cut resistance. When these fibers cannot roll, such as when they are stretched from an ill-fitting or wrong-sized glove, they can “lose” some of their cut resistance. Take an example from the kitchen and do this simple experiment: Put a cucumber on a cutting board and take a very sharp knife. Try to cut the cucumber with a sawing motion without holding the cucumber. It just rolls and doesn’t cut. Now hold that cucumber and do the same thing. It cuts very easily. Tight-fitting gloves can perform like the immobilized cucumber. Loose-fitting gloves can also be a hazard for catching or snagging on tools and equipment. Make sure your glove program accounts for proper sizing and employees know what to look for when picking gloves.

Coating impacts cut-resistant gloves that use cut-resistant fibers. Once the coating is applied, the rolling and twisting that helps the fiber achieve its cut resistance can be reduced. Most coated gloves have higher cut resistance on the back-of-hand than on the palm because the fibers are not coated. Keep this in mind as you select your hand protection.

Grip is also important. Using grip that isn’t appropriate for the job can lead to higher injury rates as objects with sharp edges slip, causing injury.

Be Smart About PPE Testing

Improper glove care can shorten the life of your PPE. It can also lead to dermatitis, decreased dexterity, loss of protective abilities, and odor. Glove care refers not only to laundering, but also proper storage, routine glove checks, and knowledge of materials and their particular strengths and weaknesses.

Because there are so many different work gloves on the market, experienced safety managers should be aware of what workers’ gloves are made of and how they will stand up to the applications they’re being used for. Common glove materials include nylon, spandex, leather, cotton, SuperFabric®, Kevlar®, and knit fibers. Each of these materials has a certain way it needs to be cared for, and oftentimes there is a blending of the materials, making proper care even more crucial.

Proper storage: Gloves should be ideally stored in clean, dry conditions, away from direct sunlight and extreme temperatures.

Routine glove checks: Glove life varies based on application, environment, and amount of use. Because of this, it is vital that you perform routine glove checks, ideally before going to work every day. Take note of areas that may have begun to wear down, such as loose Velcro®, a worn-down nametag, lingering moisture, or a strong odor. Keeping an eye out for these issues and others keeps you one step further from a worksite hand injury, which is the ultimate goal of hand protection in the first place.

Care and content: Our C&C tag, which indicates washing instructions and fiber content, is located on the inside cuff of all our gloves.

• Gloves marked “wash with care” are machine washable. The number inside the symbol denotes what temperature to wash the gloves at (e.g., machine wash with care at 30 degrees Celsius). Washing with care can be done by changing the machine cycle, using a different pre-set wash program (gentle/delicate), and being sure not to overload the washing machine.

• When washing by hand it is important to use

a soap and/or detergent that won’t irritate your skin. Also, be sure to wash gloves over a sink or outside, and rinse thoroughly.

Companies who properly launder their gloves can increase lifespan by up to 300%. Laundering removes harmful chemicals, perspiration, and everyday grit and grime that can weaken protective fibers and seams. Our team of HexArmor® solutions specialists are here to help you with this process, and they are more than happy to provide you with all the information you need.

Wash with care

Do not bleach

Hang dry (indoors)

Hand wash only

Tumble dry low

Line dry

30

877.MYARMOR | hexarmor.com Glove Care I Page 75

Glove Care: Why Does It Matter?

Call 1-877-MY ARMOR or visit hexarmor.comHexArmor® products are cut and puncture resistant, NOT CUT AND PUNCTURE PROOF. Do not use with moving or serrated blades or tools. User shall be exclusively responsible to assess the suitability of the product as specified for any individual application or use. Protection zones are to be used as a general guide. Actual product protection zones may differ.

Protected by patents and patents pending. SuperFabric® is a registered trademark of HDM, Inc.

© Copyright 2014 HexArmor®. All rights reserved.

All products, product descriptions, and performance scores are current as of September 2014. For current product information, please visit hexarmor.com, or call 1-877-MY ARMOR.

HC-0014

Documents

Hexarmor catalogus