Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
SmartAX MA5616 Multi-service Access Module
Hardware Description
Issue 09
Date 2017-06-30
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior writtenconsent of Huawei Technologies Co., Ltd. Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respectiveholders. NoticeThe purchased products, services and features are stipulated by the contract made between Huawei and thecustomer. All or part of the products, services and features described in this document may not be within thepurchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees orrepresentations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.Address: Huawei Industrial Base
Bantian, LonggangShenzhen 518129People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
i
Contents
1 About This Document.................................................................................................................. 1
2 Chassis Description.......................................................................................................................42.1 Appearance..................................................................................................................................................................... 42.2 Hardware Configuration................................................................................................................................................. 62.3 Chassis Power Consumption.......................................................................................................................................... 72.4 Fan Tray........................................................................................................................................................................102.5 Power Supply Parameters.............................................................................................................................................122.6 Physical Specifications................................................................................................................................................. 132.7 Outdoor Cabinets..........................................................................................................................................................13
3 Board.............................................................................................................................................. 163.1 Board Overview............................................................................................................................................................173.1.1 Board Structure..........................................................................................................................................................173.1.2 Board Dimensions..................................................................................................................................................... 193.1.3 Board Name and Version...........................................................................................................................................193.1.4 Board Label............................................................................................................................................................... 203.2 Mapping Between Boards and Software Versions....................................................................................................... 213.3 Mapping Between Boards and Control Boards............................................................................................................ 253.4 Board Power Consumption...........................................................................................................................................273.5 Control Board............................................................................................................................................................... 323.5.1 Differences Between Control Boards........................................................................................................................ 323.5.2 H831CCUB Board Description................................................................................................................................. 353.5.3 H831CCUC Board Description................................................................................................................................. 423.5.4 H831CCUE Board Description................................................................................................................................. 483.5.5 Daughter Board..........................................................................................................................................................583.6 VDSL2 Service Board.................................................................................................................................................. 613.6.1 Differences Between VDSL2 Service Boards...........................................................................................................613.6.2 H835VDGE Board Description.................................................................................................................................663.6.3 H835VDSE Board Description................................................................................................................................. 703.6.4 H835VDSH Board Description................................................................................................................................. 733.6.5 H835VDTH Board Description.................................................................................................................................763.6.6 H836VCLE Board Description................................................................................................................................. 793.6.7 H83BVDLE Board Description.................................................................................................................................82
SmartAX MA5616 Multi-service Access ModuleHardware Description Contents
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
ii
3.6.8 H83BVDLF Board Description.................................................................................................................................863.6.9 H83BVCLE Board Description.................................................................................................................................893.6.10 H83BVCLF Board Description............................................................................................................................... 933.6.11 H83BVDMM Board Description.............................................................................................................................973.6.12 H83BVCMM Board Description...........................................................................................................................1003.6.13 H83DVCMM Board Description.......................................................................................................................... 1043.6.14 H83DSDMM Board Description...........................................................................................................................1083.6.15 H836VCPE Board Description..............................................................................................................................1123.6.16 H83DVCPE Board Description............................................................................................................................. 1163.6.17 H83DVCPD Board Description............................................................................................................................ 1203.7 ADSL2+ Service Board..............................................................................................................................................1243.7.1 Differences Between ADSL2+ Service Boards.......................................................................................................1243.7.2 H83AADLE, H835ADLE, and H836ADLE Board Description............................................................................ 1253.7.3 H836ADPE Board Description............................................................................................................................... 1293.8 SHDSL Service Board................................................................................................................................................1323.8.1 H832SHLH Board Description............................................................................................................................... 1323.9 Ethernet Service Board...............................................................................................................................................1363.9.1 Differences Between Ethernet Service Boards........................................................................................................1363.9.2 H831EIUD Board Description................................................................................................................................ 1363.9.3 H831EIUA Board Description................................................................................................................................ 1403.10 Voice Service Board................................................................................................................................................. 1423.10.1 Differences Between Voice Service Boards.......................................................................................................... 1423.10.2 H838ASRB Board Description............................................................................................................................. 1433.10.3 H837ASPB, H838ASPB, and H839ASPB Board Description............................................................................. 1473.10.4 H832DSLD Board Description............................................................................................................................. 1503.10.5 H831EDTB Board Description............................................................................................................................. 1533.11 Combo Board............................................................................................................................................................1593.11.1 Differences Between Combo Boards.....................................................................................................................1603.11.2 H835CALE Board Description..............................................................................................................................1643.11.3 H836CALE Board Description..............................................................................................................................1693.11.4 H83BCVLC and H83BCVLE Board Description................................................................................................. 1743.11.5 H836CCME Board Description.............................................................................................................................1793.11.6 H83DCCME Board Description............................................................................................................................1843.11.7 H83DCSME Board Description............................................................................................................................ 1893.12 Power Board............................................................................................................................................................. 1943.12.1 Differences Between Power Boards...................................................................................................................... 1953.12.2 H831PDIA Board Description...............................................................................................................................1963.12.3 H832PDIA Board Description...............................................................................................................................1993.12.4 H832PDVA Board Description..............................................................................................................................2013.12.5 H832PDVAA Board Description...........................................................................................................................2043.12.6 H832PDMSB Board Description.......................................................................................................................... 2063.12.7 H832PDNAA Board Description.......................................................................................................................... 208
SmartAX MA5616 Multi-service Access ModuleHardware Description Contents
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
iii
3.12.8 H832PDVSA Board Description........................................................................................................................... 2113.12.9 H832PDVSB Board Description........................................................................................................................... 2133.12.10 H831PAVDA Board Description......................................................................................................................... 2153.12.11 H831PAIA Board Description............................................................................................................................. 2183.12.12 H831PAIC Board Description............................................................................................................................. 2203.12.13 H831PAIB Board Description............................................................................................................................. 2213.12.14 VCE Daughter Board...........................................................................................................................................2263.13 Board Indicator......................................................................................................................................................... 2293.14 Optical Module......................................................................................................................................................... 240
4 Cable............................................................................................................................................ 2474.1 DC Power Cable......................................................................................................................................................... 2484.2 AC Power Cable......................................................................................................................................................... 2504.3 Lead-acid Battery Power Cable..................................................................................................................................2514.4 Fe-lithium Battery Power Cable................................................................................................................................. 2534.5 PGND Cable............................................................................................................................................................... 2554.6 Local Maintenance Serial Cable.................................................................................................................................2564.7 Local Maintenance and Environment Monitoring Combo Cable...............................................................................2584.8 Network Cable............................................................................................................................................................2594.9 CXP High-Speed Cable.............................................................................................................................................. 2614.10 Environment Monitoring Cable................................................................................................................................2634.11 Clock Bridging Cable............................................................................................................................................... 2654.12 Subscriber Cable.......................................................................................................................................................2674.12.1 32-Channel Subscriber Cable................................................................................................................................ 2674.13 E1 Trunk Cable.........................................................................................................................................................2704.13.1 75-ohm E1 Trunk Cable........................................................................................................................................ 2704.13.2 120-ohm E1 Trunk Cable...................................................................................................................................... 2734.14 Optical Fiber............................................................................................................................................................. 275
5 Electromechanical Device........................................................................................................ 2785.1 EPS30-4815AF Power System...................................................................................................................................2785.2 ETP4830 Power System............................................................................................................................................. 285
6 Environment Requirement...................................................................................................... 2926.1 Operation Environment.............................................................................................................................................. 2926.2 Transport Environment............................................................................................................................................... 2936.3 Storage Environment.................................................................................................................................................. 2966.4 Corrosive Gas Control................................................................................................................................................ 2976.5 Environment Requirements on Outdoor Cabinets......................................................................................................298
7 A Acronyms and Abbreviations............................................................................................. 299
SmartAX MA5616 Multi-service Access ModuleHardware Description Contents
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
iv
1 About This Document
Intended AudienceThis document describes the hardware of the MA5616 in terms of chassis, board, cable, andelectromechanical device.
This document is intended for:
l Network planning engineerl Hardware installation engineerl Installation and commissioning engineerl Field maintenance engineerl Data configuration engineerl System maintenance engineer
Symbol ConventionsThe following symbols may be found in this document. They are defined as follows:
Symbol Description
Indicates a hazard with a high level or medium level of riskwhich, if not avoided, could result in death or seriousinjury.
Indicates a hazard with a low level of risk which, if notavoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation that, if notavoided, could result in equipment damage, data loss,performance deterioration, or unanticipated results.
Provides a tip that may help you solve a problem or savetime.
Provides additional information to emphasize orsupplement important points in the main text.
SmartAX MA5616 Multi-service Access ModuleHardware Description 1 About This Document
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
1
Change History
Updates between document issues are cumulative. Therefore, the latest document issuecontains all updates made in previous issues.
Updates in Issue 11 (2018-04-30)
This issue is the eleventh official release. It has the following changes:
The 3.12.6 H832PDMSB Board Description and H836VPME daughter board are added.
Updates in Issue 10 (2017-09-30)
This issue is the tenth official release. It has the following changes:
The H831GE4A daughter board is added.
Updates in Issue 09 (2017-06-30)
This issue is the ninth official release. It has the following changes:
Added: 3.11.7 H83DCSME Board Description
Updates in Issue 08 (2016-07-10)
This issue is the eighth official release. It has the following changes:
l Added: 3.11.3 H836CALE Board Descriptionl Added: 3.12.8 H832PDVSA Board Descriptionl Added: 3.12.9 H832PDVSB Board Descriptionl Modified: 3.12.1 Differences Between Power Boardsl Modified: 3.11.1 Differences Between Combo Boardsl Modified: 2.4 Fan Trayl Modified: 3.2 Mapping Between Boards and Software Versionsl Modified: 3.3 Mapping Between Boards and Control Boardsl Modified: 3.4 Board Power Consumption
Updates in Issue 07 (2016-03-31)
This issue is the seventh official release. It has the following changes:
l Modified: 3.4 Board Power Consumptionl Modified: 2.3 Chassis Power Consumption
Updates in Issue 06 (2015-09-30)
This issue is the sixth official release. It has the following changes:
l Added: 3.6.17 H83DVCPD Board Descriptionl Added: 3.6.14 H83DSDMM Board Description
SmartAX MA5616 Multi-service Access ModuleHardware Description 1 About This Document
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
2
Updates in Issue 05 (2015-08-28)This issue is the fifth official release. It has the following changes:
Modified: 3.10.3 H837ASPB, H838ASPB, and H839ASPB Board Description
Updates in Issue 04 (2015-05-30)This issue is the fourth official release. It has the following changes:l Added: 3.11.6 H83DCCME Board Descriptionl Added: 3.6.13 H83DVCMM Board Descriptionl Added: 3.6.16 H83DVCPE Board Description
Updates in Issue 03 (2015-02-17)This issue is the third official release. It has the following changes:l Added: 3.5.1 Differences Between Control Boardsl Added: 3.7.1 Differences Between ADSL2+ Service Boardsl Added: 3.9.1 Differences Between Ethernet Service Boardsl Added: 3.10.1 Differences Between Voice Service Boardsl Added: 3.11.1 Differences Between Combo Boards
Updates in Issue 02 (2014-10-30)This issue is the second official release. Add the boards:l 3.6.15 H836VCPE Board Descriptionl 3.11.5 H836CCME Board Description
Updates in Issue 01 (2014-04-30)This issue is the first official release.
The hardware description of V800RR310C00 and later versions is integrated to facilitatequery of hardware support and implementation for various versions.
3.2 Mapping Between Boards and Software Versions is added to describe SoftwareVersions Supported by This Board, Out of Product or Not, and Substitution Relationship.
SmartAX MA5616 Multi-service Access ModuleHardware Description 1 About This Document
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
3
2 Chassis Description
About This Chapter
2.1 AppearanceThe MA5616 chassis houses six boards and a fan tray. Mounting ears are provided forinstalling the MA5616 chassis in a 19-inch cabinet or rack.
2.2 Hardware ConfigurationIn the MA5616 chassis, slot 0 houses the control board, slots 1-4 service boards, and slot 5power board.
2.3 Chassis Power ConsumptionThis topic provides the dimensions, weight, and typical power consumption of the MA5616chassis.
2.4 Fan TrayThe MA5616 chassis provides a fan tray that houses a fan monitoring board and fans for heatdissipation.
2.5 Power Supply ParametersThe MA5616 can be powered by a DC or AC power source using a DC or AC power board.After power board conversion, the MA5616 discharges electricity for the backplane andsupplies power to service boards, control board, and fan monitoring board using thebackplane.
2.6 Physical SpecificationsThis topic provides the dimensions, weight of the MA5616 chassis.
2.7 Outdoor CabinetsThe MA5616 can be installed in outdoor cabinets.
2.1 AppearanceThe MA5616 chassis houses six boards and a fan tray. Mounting ears are provided forinstalling the MA5616 chassis in a 19-inch cabinet or rack.
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
4
Appearance
Figure 2-1 Appearance of the MA5616 (AC-powered, configured with CCUE control board)
NOTEThe MA5616 appearance varies depending on boards equipped on it. Figure 2-1 shows the appearanceof the MA5616 configured with the CCUE control board, AC-powered. For details, see boardintroduction.
ESD JackWear an ESD wrist strap when inserting and removing a board. Insert one end of the ESDwrist strap into the ESD jack in the left of the chassis.
Figure 2-2 Position of the ESD jack on the MA5616 chassis
GroundingThe MA5616 chassis must be grounded properly so that the lightning can flow to the ground,which improves the capability of the chassis for resisting the electromagnetic interference.
NOTICEl Ensure that the ground cable is connected correctly so that the MA5616 chassis is
protected against lightning and interference. The correct connection of the ground cable isan important measure to ensure the human safety.
l The ground resistance of the chassis is recommended to be smaller than 10 ohms. Inaddition, the national or local standards and specifications need to be referenced.
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
5
Connect the ground point on the chassis shell or ground point on the mounting ears to theground point of the cabinet by using a ground cable for grounding the MA5616 chassis. Selectone ground method based on the installation scenario.
Figure 2-3 Ground points of the MA5616 chassis
2.2 Hardware ConfigurationIn the MA5616 chassis, slot 0 houses the control board, slots 1-4 service boards, and slot 5power board.
MA5616s support H831MABA and H831MABB backplanes. If an MA5616 is required tosupport vectoring, configure an H831MABB backplane for it.
Figure 2-4 shows the layout of the MA5616 chassis.
Figure 2-4 Layout of the MA5616 chassis
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
6
Table 2-1 Board configuration and slot restriction in the MA5616 chassis
Board Name Slot
Control board 0
VDSL2 service board 1-4 (These boards can be installed in all of the four slots.)NOTE
When the MA5616 uses the CCUC control board, EIUD can beinserted in slot 1 or 2, and can be configured in all the two serviceslots.
ADSL2+ service board
SHDSL service board
Ethernet service board
Voice board
Combo board
Power board 5
2.3 Chassis Power ConsumptionThis topic provides the dimensions, weight, and typical power consumption of the MA5616chassis.
NOTE
l The static power consumption is the power consumption in the case that all ports are not activated.
l The typical power consumption is the power consumption in the case that 50% broadband serviceports are activated and 25% telephones connected to the voice service ports are off-hook, and thePOTS current is 20 mA.
l The maximum power consumption is the power consumption in the case that all broadband serviceports are activated and its maximum number of concurrent voice ports supported are off-hook, andthe POTS current is 20 mA.
l The static, typical, and maximum power consumption are obtained when the fan rotates at a defaultrate.
l The power consumption of an MA5616 that uses a single gigabit Ethernet (GE) port for upstreamtransmission is 0.6 W less than that of anMA5616 that uses a single GPON port. The powerconsumption of an MA5616 that uses a single GPON port for upstream transmission is 11.4 W lessthan that of an MA5616 that uses a single 10G GPON port for upstream transmission.
l The following provides the typical power consumption. For more power consumption, use the "One-Stop Hardware Configuration Tool" from Access Network Hardware Configuration Tool.
l Table 2-2 lists the power consumption of the MA5616 chassis configured withH831CCUE control board (DC-powered, GPON upstream transmission).
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
7
Table 2-2 Power consumption of the MA5616 chassis (H832PDVAA-powered, GPONupstream transmission)
Typical Configuration StaticPowerConsumption (W)
TypicalPowerConsumption (W)
MaximumPowerConsumption (W)
H831CCUE board (H831UPA2AA) + 4 *H836ADLE
54 122 185
H831CCUE board (H831UPA2AA) + 4 *H835VDGE (17a)
77 118 161
H831CCUE board (H831UPA2AA) + 4 *H835VDSE (17a)
72 141 211
H831CCUE board (H831UPA2AA) + 4 *H83BVDLE (17a)
72 132 191
H831CCUE board (H831UPA2AA) + 4 *H83BVCLE/VCLF (17a)
115 181 241
H831CCUE board (H831UPA2AA) + 4 *H83BVCMM(17a)
127 217 302
H831CCUE board (H831UPA2AA) + 4 *H83DVCMM (17a)
98 172 241
H831CCUE board (H831UPA2AA) + *H83DVCPE (17a)
97 191 279
H831CCUE board (H831UPA2AA +H836ASDM) + 4 * H83DVCPE (17a)
103 196 287
H831CCUE board (H831UPA2AA +H836ASDM) + 4 * H83BVDMM (17a)
89 175 256
H831CCUE board (H831UPA2AA +H836ASDM) + 2 * H838ASPB
48 104 155
H831CCUE board (H831UPA2AA +H836ASDM) + 2 * H835ADLE + 2 *H838ASPB
58 140 220
H831CCUE board (H831UPA2AA +H836ASDM) + 4 * H835CALE
77 176 270
H831CCUE board (H831UPA2AA +H836ASDM) + 4 * H83BCVLE (17a)
101 200 300
l Table 2-3 lists the power consumption of the MA5616 chassis configured with
H831CCUB control board (AC-powered, GPON upstream transmission).
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
8
Table 2-3 Power consumption of the MA5616 chassis (H831PAIC-powered, GPONupstream transmission)
Typical Configuration StaticPowerConsumption (W)
TypicalPowerConsumption (W)
MaximumPowerConsumption (W)
H831CCUB board + 4*H835ADLE 53 116 193
H831CCUB board (H831GP1A) + 4 *H835VDGE (17a)
89 116 163
H831CCUB board (H831GP1A) + 4 *H835VDSE (17a)
78 138 216
H831CCUB board (H831GP1A) + 4 *H83BVDLE (17a)
78 130 196
H831CCUB board (H831GP1A+H836ASDM) + 2 * H838ASPB
55 98 156
H831CCUB board (H831GP1A+H836ASDM) + 2 * H835ADLE+ 2 *H838ASPB
66 139 225
H831CCUB board (H831GP1A+H836ASDM) + 4 * H835CALE
88 176 278
H831CCUB board (H831GP1A+H836ASDM) + 4 * H83BCVLE (17a)
113 203 313
l Table 2-4 lists the power consumption of the MA5616 chassis configured with
H831CCUC control board (AC-powered, GPON upstream transmission).
Table 2-4 Power consumption of the MA5616 chassis (H831PAIC-powered, GPONupstream transmission)
Typical Configuration StaticPowerConsumption (W)
TypicalPowerConsumption (W)
MaximumPowerConsumption (W)
H831CCUC board (H831UP2A) + 4 *H835ADLE
42 107 185
H831CCUC board (H831UP2A) + 4 *H835VDGE (17a)
78 107 155
H831CCUC board (H831UP2A) + 4 *H835VDSE
73 129 210
H831CCUC board (H831UP2A) + 4 *H83BVDLE (17a)
80 129 200
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
9
Typical Configuration StaticPowerConsumption (W)
TypicalPowerConsumption (W)
MaximumPowerConsumption (W)
H831CCUC board (H831UP2A) + 4 *H83BVDMM (17a)
90 168 255
H831CCUC board (H831UP2A +H836ASDM) + 2 * H838ASPB
43 93 147
H831CCUC board (H831UP2A +H836ASDM) + 2 * H835ADLE + 2 *H838ASPB
55 131 218
H831CCUC board (H831UP2A +H836ASDM) + 4 * H835CALE
77 169 270
H831CCUC board (H831UP2A +H836ASDM) + 4 * H83BCVLE (17a)
104 195 305
2.4 Fan TrayThe MA5616 chassis provides a fan tray that houses a fan monitoring board and fans for heatdissipation.
FunctionThe fan tray of the MA5616 chassis provides the following functions:
l Heat dissipation: The fan tray is located in the left part of the MA5616 chassis and blowsair to dissipate heat for the chassis.
l Monitoring: A fan monitoring board is configured in the fan tray. The fan monitoringboard checks whether the fans are functioning properly, provides a port forcommunicating with the control board, and periodically transmits the monitoringinformation to the control board.
l Speed adjustment: The fan tray automatically adjusts fan speed according to thetemperatures detected by temperature sensors on all boards and the traffic volume on thevoice service boards.
IndicatorTable 2-5 describes the FAN indicator on the fan tray of the MA5616 chassis.
Table 2-5 FAN indicator on the fan tray
Silk Screen Description
FAN Steady green The fan tray functions properly.
Steady red The fan tray is abnormal.
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
10
Specifications
Table 2-6 Specifications of the fan tray
Parameter Specification
Dimensions (W x D x H) 29 mm x 220 mm x 85.5 mm
Weight 0.5 kg
Maximum power consumption 15 W (including the power consumption oftwo fans)
VentilationThe ventilation of the MA5616 chassis is as follows: Cool air enters the chassis from the leftside, and then flows towards the right side, and finally exits from the right side.
Figure 2-5 Ventilation of the MA5616 chassis
Fan StatusFans in the fan tray of the MA5616 chassis have the following modes:
l Self-check mode: Fans start running at full speed when the device is powered on for thefirst time or is reset. After fans start up, the duty ratio of fans is initialized.
l Troubleshooting mode: The remaining fans run in accordance with the actual amount ofwind required by the system cooling when one fan failure or stop rotation.
l Board-based fan speed adjustment mode: According to the temperatures detected bytemperature sensors on all boards and the traffic volume on the voice service boards,fans automatically adjust their speed.
Figure 2-6 shows the status transfer of the fans after the fan tray starts up.
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
11
Figure 2-6 Fan status transfer
2.5 Power Supply ParametersThe MA5616 can be powered by a DC or AC power source using a DC or AC power board.After power board conversion, the MA5616 discharges electricity for the backplane andsupplies power to service boards, control board, and fan monitoring board using thebackplane.
Figure 2-7 Power distribution principles of the MA5616 chassis
power board Backplane Boardinput
-48 V DC
BGND, GND
+12 V DC
+3.3 V DC
-48 V DC
+12 V DC
+3.3 V DC
BGND, GND
Table 2-7 lists the power supply parameters of the MA5616 chassis.
Table 2-7 Power supply parameters of the MA5616 chassis
Power supplymode
Working voltagerange
Maximum input current
DC power supply -38.4 V DC to -72 VDC
14 A
AC power supply 90 V AC to 264 VAC
6 A
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
12
Power supplymode
Working voltagerange
Maximum input current
AC power supplywith power backup
l AC powersupply: 90 V ACto 264 V AC
l Power backup:-43.2 V DC to-52 V DC
l AC power supply: 3 Al Power backup: 5 A
2.6 Physical SpecificationsThis topic provides the dimensions, weight of the MA5616 chassis.
DimensionsTable 2-8 lists the dimensions of the MA5616 chassis.
Table 2-8 Dimensions of the MA5616 chassis
Parameter Specification (W x D x H)
Dimensions (excluding mounting ears) 442 mm x 245 mm x 88.1 mm
Dimensions (including mounting ears) 482.6 mm x 245 mm x 88.1 mm
WeightTable 2-9 lists the weight of the MA5616 chassis.
Table 2-9 Weight of the MA5616 chassis
Parameter Specification
Weight (chassis in full configuration) ≤ 10.0 kg
2.7 Outdoor CabinetsThe MA5616 can be installed in outdoor cabinets.
NOTETable 2-10 lists only main outdoor cabinets housing the MA5616. For more outdoor cabinets supportedby the MA5616, see the outdoor cabinet description manual.
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
13
Table 2-10 Main outdoor cabinets housing the MA5616
Outdoor Cabinet Appearance Dimensions (W x Dx H)
Typicalconfiguration
F01S50 560 mm x 200 mm x850 mm (with abattery compartment)560 mm x 200 mm x650 mm (without abattery compartment)
Can be equipped withone MA5616, whichprovides a maximumof:l 64 POTS portsl 64 ADSL2+ portsl 48 VDSL2 ports
F01S100 670 mm x 250 mm x830 mm (with abattery compartment)670 mm x 250 mm x1033 mm (with anenhanced heatdissipation module)670 mm x 250 mm x910 mm (with anenhanced heatdissipation moduleand batterycompartment)670 mm x 250 mm x1113 mm (with abattery compartment)
Can be equipped withone MA5616, whichprovides a maximumof:
l 256 POTS ports
l 32 ISDN ports
l 128 ADSL2+ports
l 128 VDSL2 ports
l 64 SHDSL ports
l 128 POTS andVDSL2 ports
l 128 POTS andADSL2+ ports
F01S200 750 mm x 350 mm x850 mm750 mm x 350 mm x270 mm (with abattery compartment)750 mm x 350 mm x80 mm (with anenhanced heatdissipation module)750 mm x 350 mm x1200 mm (with anenhanced heatdissipation moduleand batterycompartment)
Can be equipped withone MA5616, whichprovides a maximumof:l 192 VDSL2 portsl 128 POTS and
VDSL2+ portsl 128 POTS and
ADSL2 portsl 256 ADSL2+
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
14
Outdoor Cabinet Appearance Dimensions (W x Dx H)
Typicalconfiguration
F01S300 850 mm x 450 mm x1350 mm
Can be equipped with1-3 MA5616s.Two MA5616sprovide a maximumof:l 384 VDSL2 ports
in copper lineaccess mode
l In copper line andoptical fiberaccess mode:– 8 FE, 8 GE,
and 384 POTSports
– 8 FE, 8 GE,and 192 POTSand ADSL2+ports
– 8 FE, 8 GE,and 192ADSL2+ ports
– 8 FE, 8 GE,and 144VDSL2 ports
Three MA5616sprovide a maximumof:l 768 POTS portsl 384 VDSL2 portsl 384 ADSL2+
portsl 384 POTS and
ADSL2+ portsl 384 POTS and
VDSL2 ports
SmartAX MA5616 Multi-service Access ModuleHardware Description 2 Chassis Description
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
15
3 Board
About This Chapter
This topic covers the types, functions, working principles, front panels, ports, daughterboards, pin assignments, and specifications of the boards used in the MA5616 chassis.
NOTEAll boards are hot-swappable. After the control board or power board is hot-swapped, the device willstop working.
3.1 Board OverviewThis manual describes the board structure, dimensions, name, version and label.
3.2 Mapping Between Boards and Software VersionsThis section describes mapping between boards and software versions.
3.3 Mapping Between Boards and Control BoardsThis section describes the types and names of boards supported by the MA5616, and themapping between these boards and control boards.
3.4 Board Power Consumption
3.5 Control BoardThe control board converges upstream services and manages devices, and manages servicesfor each interface module.
3.6 VDSL2 Service BoardVDSL2 service boards provide the VDSL2 access service using broadband ports.
3.7 ADSL2+ Service BoardADSL2+ service boards provide ADSL2+ access services using the broadband ports.
3.8 SHDSL Service BoardSHDSL service boards provide the SHDSL access service using broadband ports.
3.9 Ethernet Service BoardEthernet service boards are used for GE or FE signal access to implement the Ethernetservice.
3.10 Voice Service BoardVoice service boards support VoIP POTS, ISDN BRA, ISDN PRA and R2 services.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
16
3.11 Combo BoardThe combo board is a broadband and narrowband combo service board and provides threeapplication modes: combo mode, broadband mode, and narrowband mode. In combo mode,the combo board supports both broadband and voice services.
3.12 Power BoardConnected to the external AC or DC power supply, the power board converts the voltage ofsuch power supply into a proper voltage using its power module and powers other boards inthe chassis.
3.13 Board IndicatorIndicators are present on the front panel of each board.
3.14 Optical ModuleThis topic describes the types and specifications of pluggable optical modules supported bythe MA5616.
3.1 Board OverviewThis manual describes the board structure, dimensions, name, version and label.
3.1.1 Board StructureA board mainly consists of the printed circuit board (PCB) and the front panel.
Figure 3-1 shows the structure of a board (using the CCUE board as an example).
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
17
Figure 3-1 Board structure
A board mainly consists of the following parts:
l PCB
The PCB houses various functional chips of the board and is the most important part ofthe board. Through the front panel, the PCB provides indicators, buttons, and ports. Forsome boards, the PCB also provides a position for installing a daughter board.
NOTE
Different boards provide different indicators, buttons, and ports; not all boards support a daughterboard. For details, see the description of each board.
l Front panel, including the captive screws, ejector levers, and plate
– Captive screws: secure the board in the subrack.
– Ejector levers: used for inserting or removing the board.
– Plate: connects the PCB and the ejector levers. The plate also provides a surface forattaching some labels (such as the bar code label and laser label).
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
18
3.1.2 Board DimensionsThis topic describes the dimensions of each type of board.
Figure 3-2 shows the dimensions of a board (using a EIUA service board as an example).
Figure 3-2 Board dimensions
Table 3-1 lists the dimensions of the boards supported by the product.
Table 3-1 Board dimensions
BoardType
Board Appearance Dimensions (Wx D x H)
Controlboard
140 mm x 220mm x 40.14 mm
Powerboard
140 mm x 220mm x 40.14 mm
Serviceboard
265 mm x 220mm x 20.32 mm
3.1.3 Board Name and VersionThis topic describes the board name and version.
As shown in Figure 3-3 (using the VDSE board as an example), the board name and versionare printed on the PCB of a board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
19
Figure 3-3 Board name and version
NOTE
l H835VDSE is the full board name. Different full board names indicate different boards. Forexample, H837ASPB and H838ASPB are two different boards.
l VDSE is the board silk screen, indicating a type of board. For example, ASPB includes H837ASPBand H838ASPB that have the same silk screen.
l VER.A is the board PCB version. The PCB version will be upgraded with regard to technologydevelopment or due to end of production of some key components. Generally, a PCB version changedoes not cause board function changes, unless otherwise specified in the document.
3.1.4 Board LabelThis topic describes the meanings of the labels attached to the board front panel.
Laser Label
The optical ports of all boards use the same laser label: CLASS 1 LASER PRODUCT, whichindicates a class 1 laser. The laser label is shown in Figure 3-4.
Figure 3-4 Laser label
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
20
The optical port with a class 1 laser provides a maximum output optical power lower than 10dBm (10 mW).
DANGERDo not look into an optical port without eye protection. The laser will injure your eyes.
Bar Code Label
The bar code label is the first 16 digits of a general board label, as shown in Figure 3-5.
Figure 3-5 Board bar code
Board typeMRPII system code
Year Month Serial number
Position Name Introduction
1-6 Board type The last six digits of the board BOM. The first two digitsuse default values.
7, 8 MRPIIsystem code
Codes for differentiating different vendors.
9 Year The year of production date, the last digit is used. Forexample, year 2004 is recorded as 4. From 2010, letters areused, A to Z indicate years starting from 2010.
10 Month The month of production date, in hexadecimal notation. Forexample, October is displayed as A.
11-16 Serial number The serial number (SN) of a board. It is updated everymonth and ranges from 000001 to 999999.
3.2 Mapping Between Boards and Software VersionsThis section describes mapping between boards and software versions.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
21
The following table lists the mapping between boards and version V800R310C00 and later.
Board availability is subject to released PCNs. To obtain PCNs, contact product managers atHuawei representative offices.
"All versions" refer to V800R310C00 and later.
Table 3-2 Mapping between boards and software versions
Board Name Software Versions Supporting This Board
Control Board
H831CCUB V800R310C00, V800R311C00, V800R312C00, V800R313C00,V800R313C10, V800R015C00, V800R015C10 and V800R017C10.NOTE
The MA5616 (equipped with a CCUB control board) in V800R015C10supports only GP1A, VDSH, VDLF, and PDIA boards.
H831CCUC V800R310C00, V800R311C00, V800R312C00, V800R313C00,V800R313C10, V800R015C00, V800R018C00 and V800R018C10.
H831CCUE V800R311C01 and later
VDSL2 Service Board
H835VDGE All versions
H835VDSE All versions
H835VDSH All versions
H835VDTH All versions
H836VCLE l V800R313C00SPC211 and patches later than the version havingthe same R version as V800R313C00SPC211
l V800R313C00SPH215 and patches later than the version havingthe same R version as V800R313C00SPH215
l V800R015C00SPH205 and patches later than the version havingthe same R version as V800R015C00SPH205
l V800R312C00 and later
H83BVDLE All versions
H83BVDLF All versions
H83BVCLE V800R312C00 and later
H83BVCLF V800R312C00 and later
H83BVDMM All versions
H83BVCMM l V800R313C00SPC212 and patches later than the version havingthe same R version as V800R313C00SPC212
l V800R311C00 and later
H83DVCMM V800R016C00 and later
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
22
Board Name Software Versions Supporting This Board
H83DSDMM V800R016C10 and later
H836VCPE l V800R313C00SPC209 and patches later than the version havingthe same R version as V800R313C00SPC209
l V800R016C10SPH205 and patches later than the version havingthe same R version as V800R016C10SPH205
l V800R015C10 and later
H83DVCPE V800R016C00 and later
H83DVCPD V800R016C10 and later
ADSL2+ Service Board
H83AADLE V800R311C01 and later
H835ADLE All versions
H836ADLE V800R311C01 and later
H836ADPE All versions
SHDSL Service Board
H832SHLH All versions
Ethernet Service Board
H831EIUD V800R310C00, V800R311C00, V800R312C00, and later
H831EIUA V800R310C00, V800R311C00, V800R312C00, and later
Voice Service Board
H838ASRB All versions
H837ASPB, H838ASPB, andH839ASPB
All versions
H832DSLD All versions
H831EDTB V800R015C00 and later
Combo Board
H835CALE All versions
H836CALE l V800R016C10SPH205 and patches later than the version havingthe same R version as V800R016C10SPH205
l V800R017C00 and later
H83BCVLC V800R311C01 and later
H83BCVLE V800R311C00 and later
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
23
Board Name Software Versions Supporting This Board
H836CCME l V800R016C10SPH205 and patches later than the version havingthe same R version as V800R016C10SPH205
l V800R015C10 and later
H83DCCME V800R016C00 and later
H83DCSME V800R018C00 and later
Power Board
H831PDIA All versions
H832PDIA All versions
H832PDVA V800R311C00 and later
H832PDVAA V800R311C01 and later
H832PDMSB V800R019C00 and later
H832PDNAA V800R313C10 and later
H832PDVSA V800R017C00 and later
H832PDVSB V800R017C00 and later
H831PAVDA V800R313C00 and later
H831PAIA All versions
H831PAIC All versions
H831PAIB All versions
Upstream Daughter Board
H831GP1A All versions
H831GE1A All versions
H831UP2A All versions
H831UP2C All versions
H831UP2AA V800R313C00 and later
H831UP2CA V800R313C00 and later
H833XP1A V800R313C00 and later
H831GE4A V800R018C10 and later
Voice Daughter Board
H836ASDA, H836ASDC, andH836ASDM
All versionsNOTE
The H836ASDA board has been out of production.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
24
Board Name Software Versions Supporting This Board
H836ASDF V800R016C10 and later
VCE Daughter Board
H836VPBA V800R313C00 and later
H836VPDA V800R015C00 and later
H836VPME V800R019C00 and later
H836VPSHD V800R017C00 and later
H836VPSKD V800R017C00 and later
3.3 Mapping Between Boards and Control BoardsThis section describes the types and names of boards supported by the MA5616, and themapping between these boards and control boards.
Table 3-3 lists the mapping between control boards and the boards supported by the MA5616.
Table 3-3 Mapping between boards and control boards
Board Name Mapping with Control Boards
H831CCUB H831CCUC H831CCUE
VDSL2 Service Board
H835VDGE Supported Supported Supported
H835VDSE Supported Supported Supported
H835VDSH Supported Supported Supported
H835VDTH Supported Supported Supported
H836VCLE Supported Supported Supported
H83BVDLE Supported Supported Supported
H83BVDLF Supported Supported Supported
H83BVCLE Not supported Not supported Supported
H83BVCLF Not supported Not supported Supported
H83BVDMM Not supported Supported Supported
H83BVCMM Not supported Supported Supported
H83DVCMM Not supported Supported Supported
H83DSDMM Not supported Not supported Supported
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
25
Board Name Mapping with Control Boards
H831CCUB H831CCUC H831CCUE
H836VCPE Not supported Not supported Supported
H83DVCPE Not supported Not supported Supported
H83DVCPD Not supported Not supported Supported
ADSL2+ Service Board
H83A/H835/H836ADLE
Supported Supported Supported
H836ADPE Not supported Supported Supported
SHDSL Service Board
H832SHLH Supported Supported Supported
Ethernet Service Board
H831EIUD Not supported Supported Supported
H831EIUA Not supported Supported Supported
Voice Service Board
H838ASRB Supported Supported Supported
H837/H838/H839ASPB
Supported Supported Supported
H832DSLD Supported Supported Supported
H831EDTB Not supported Not supported Supported
Combo Board
H835CALE Supported Supported Supported
H836CALE Supported Supported Supported
H83BCVLC/H83BCVLE
Supported Supported Supported
H836CCME Not supported Not supported Supported
H83DCCME Not supported Not supported Supported
H83DCSME Not supported Not supported Supported
Power Board
H831PDIA Supported Supported Supported
H832PDIA Supported Supported Supported
H832PDVA Not supported Supported Supported
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
26
Board Name Mapping with Control Boards
H831CCUB H831CCUC H831CCUE
H832PDVAA Not supported Not supported Supported
H832PDMSB Not supported Not supported Supported
H832PDNAA Not supported Not supported Supported
H832PDVSA Not supported Not supported Supported
H832PDVSB Not supported Not supported Supported
H831PAVDA Not supported Not supported Supported
H831PAIA Supported Supported Supported
H831PAIC Supported Supported Supported
H831PAIB Supported Supported Supported
3.4 Board Power ConsumptionNOTE
l The static power consumption is the power consumption in the case that all ports are not activated.
l The typical power consumption is the power consumption in the case that 50% broadband serviceports are activated and 25% telephones connected to the voice service ports are off-hook, and thePOTS current is 20 mA.
l The maximum power consumption is the power consumption in the case that all broadband serviceports are activated and its maximum number of concurrent voice ports supported are off-hook, andthe POTS current is 20 mA.
Table 3-4 Board power consumption
Board Name Static PowerConsumption (W)
Typical PowerConsumption (W)
Maximum PowerConsumption (W)
Control Board
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
27
Board Name Static PowerConsumption (W)
Typical PowerConsumption (W)
Maximum PowerConsumption (W)
H831CCUB 14 (GPON upstreamtransmission)NOTE
Compared with thepower consumptionof an H831CCUBboard using GPONupstreamtransmission, thepower consumptionof an H831CCUBboard using EPONupstreamtransmission is 0.4 Wless, and the powerconsumption of anH831CCUB boardusing GE upstreamtransmission is 1.2 Wless.
14 15
H831CCUC 18 (GPON upstreamtransmission)NOTE
Compared with thepower consumptionof an H831CCUCboard using GPONupstreamtransmission, thepower consumptionof an H831CCUCboard using EPONupstreamtransmission is 0.1 Wless, and the powerconsumption of anH831CCUC boardusing GE upstreamtransmission is 0.6 Wless.
18 19
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
28
Board Name Static PowerConsumption (W)
Typical PowerConsumption (W)
Maximum PowerConsumption (W)
H831CCUE 11 (GPON upstreamtransmission)NOTE
Compared with thepower consumptionof an H831CCUEboard using GPONupstreamtransmission, thepower consumptionof an H831CCUEboard using EPONupstreamtransmission is 0.1 Wless, and the powerconsumption of anH831CCUE boardusing GE upstreamtransmission is 0.6 Wless.
11 13
VDSL2 Service Board
H835VDGE 8b: 1517a: 15
8b: 2517a: 23
8b: 3417a: 29
H835VDSE 8b: 2017a: 20
8b: 3017a: 28
8b: 4317a: 40
H835VDSH 8b: 2017a: 20
8b: 3017a: 28
8b: 4317a: 40
H835VDTH 8b: 2017a: 20
8b: 3017a: 28
8b: 4317a: 40
H836VCLE 8b: 1517a: 1512a: 15
8b: 2717a: 2512a: 25
8b: 3717a: 3412a: 34
H83BVDLE 8b: 1017a: 10
8b: 2117a: 20
8b: 3617a: 32
H83BVDLF 8b: 1017a: 10
8b: 2117a: 20
8b: 3617a: 32
H83BVCLE 8b: 1917a: 2012a: 19
8b: N/A17a: 4112a: 43
8b: 4817a: 4712a: 44
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
29
Board Name Static PowerConsumption (W)
Typical PowerConsumption (W)
Maximum PowerConsumption (W)
H83BVCLF 8b: 1917a: 1912a: 19
8b: N/A17a: 4112a: 43
8b: 4817a: 4712a: 44
H83BVDMM 8b: 2417a: 24
8b: 3117a: 29
8b: 5317a: 49
H83BVCMM 8b: 2517a: 2512a: 25
8b: 6217a: 6012a: 60
8b: 6517a: 6512a: 64
H83DVCMM 8b: 1717a: 1712a: 17
8b: 3417a: 3112a: 31
8b: 5017a: 4512a: 45
H83DSDMM 8b: 1917a: 1912a: 1935b: 19
8b: 3317a: 3412a: 3435b: 34
8b: 4817a: 4812a: 4935b: 52
H836VCPE 8b: 2417a: 24
8b: 4417a: 42
8b: 6317a: 59
H83DVCPE 8b: 1717a: 1712a: 17
8b: 3817a: 3612a: 36
8b: 6017a: 5512a: 55
H83DVCPD 8b: 1717a: 1712a: 17
8b: 3817a: 3612a: 36
8b: 6017a: 5512a: 55
ADSL2+ Service Board
H83AADLE 11 21 30
H835ADLE 6 19 33
H836ADLE 6 19 33
H836ADPE 12 32 51
SHDSL Service Board
H832SHLH 10 11 12
Ethernet Service Board
H831EIUD 8 11 13
H831EIUA 3 5 6
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
30
Board Name Static PowerConsumption (W)
Typical PowerConsumption (W)
Maximum PowerConsumption (W)
Voice Service Board
H838ASRB 6 15 26
H837ASPB 7 24 41
H838ASPB 6 26 46
H839ASPB 6 26 46
H832DSLD 9 13 25
H831EDTB 22 23 24
Combo Board
H835CALE 9 24 47
H836CALE 10 29 63
H83BCVLC 8b: 1317a: 13
8b: 4517a: 43
8b: 8417a: 81
H83BCVLE 8b: 1317a: 13
8b: 4517a: 43
8b: 8417a: 81
H836CCME 8b: 2617a: 26
8b: 4917a: 44
8b: 8917a: 80
H83DCCME 8b: 2217a: 22
8b: 4517a: 43
8b: 8317a: 78
H83DCSME 8b: 2317a: 2335b: 23
8b: 4517a: 4535b: 46
8b: 8117a: 8235b: 85
Upstream Daughter Board
H831GP1A 6 6 8
H831EP1A 5 5 7
H831GE1A 1 1 1
H831UP2A 0 0 0
H831UP2C 3 3 3
H831UP2AA 0 0 0
H831UP2CA 3 3 3
H833XP1A 7 7 9
H831GE4A 14 14 17
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
31
Board Name Static PowerConsumption (W)
Typical PowerConsumption (W)
Maximum PowerConsumption (W)
Voice Daughter Board
H836ASDA 7 7 7
H836ASDC 7 7 7
H836ASDM 7 7 7
H836ASDF 10 11 11
Vectoring Daughter Board
H836VPBA 14 27 27
H836VPDA 32 35 35
H836VPSHD 50 64 64
H836VPSKD 50 64 64
3.5 Control BoardThe control board converges upstream services and manages devices, and manages servicesfor each interface module.
3.5.1 Differences Between Control BoardsAll control boards support the following functions:l Local and remote maintenancel Environmental monitoring parametersl Boolean alarm reporting
Table 3-5 lists the differences between control boards.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
32
Table 3-5 Differences between control boards
Parameter H831CCUB H831CCUC H831CCUE
Supporteddaughter board
Upstream daughterboard:l H831GP1Al H831GE1AVoice daughterboard:l H836ASDAl H836ASDCl H836ASDM
Upstream daughterboard:l H831UP2Al H831UP2CVoice daughterboard:l H836ASDAl H836ASDCl H836ASDM
Upstream daughterboard:l H831UP2Al H831UP2Cl H831UP2AAl H831UP2CAl H833XP1Al H831GE4AVoice daughterboard:l H836ASDAl H836ASDCl H836ASDMl H836ASDF
Upstreamtransmission mode
l GPONl EPONl GE
l GPONl EPONl GE
l GPONl EPONl GEl XG-PON
Port on the frontpanel (on themother board)
l CONSOLEl ESCl ETHl ALARMl GE0
l CON/ESCl ETHl CLK/TODl ALARMl GE
l CON/ESCl ETHl CLK/TODl ALARMl GE
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
33
Parameter H831CCUB H831CCUC H831CCUE
Uplink port (on thedaughter board)
When anH831GP1Adaughter board isconfigured:l GE0 (SFP port)l PON (SFF port)When anH831GE1Adaughter board isconfigured:l GE0 (SFP port)l GE1 (SFP port)
When anH831UP2A orUP2C daughterboard is configured:l 0 (SFP port)l 1 (SFP port)
When anH831UP2A orUP2C daughterboard is configured:l 0 (SFP port)l 1 (SFP port)When anH833XP1Adaughter board isconfigured: XG-PON (SFP port)When anH831GE4Adaughter board isconfigured:l GE0 (CSFP port
or SFP port)/XGE0 (SFP+port)
l GE1 (CSFP portor SFP port)/XGE1 (SFP+port)
l GE2 (CSFP port)l GE3 (CSFP port)
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
34
Parameter H831CCUB H831CCUC H831CCUE
Cascading port One GE cascadingport (optical orelectrical)NOTE
"optical andelectrical" means thatusers can use eitherport GE0 on thedaughter board or theGE0 electrical porton the panel forupstreamtransmission.
One GE cascadingport (optical orelectrical)NOTE
"optical or electrical"means that:
l Both ports 0 and1 provided by adaughter boardsupport both theGE optical andelectricalmodules toprovide opticaland electricalports. Users canselect either ofthe ports tofunction as theGE optical port orelectrical port.
l Users can useeither port 0 onthe daughterboard or the GEelectrical port onthe panel forupstreamtransmission.
One GE cascadingport (optical orelectrical)NOTE
"optical or electrical"means that:
l Both ports 0 and1 provided by adaughter boardsupport both theGE optical andelectricalmodules toprovide opticaland electricalports. Users canselect either ofthe ports tofunction as theGE optical port orelectrical port.
l Users can useeither port 0 onthe daughterboard or the GEelectrical port onthe panel forupstreamtransmission.
Synchronous clocktransferring
Not supported Supported Supported
NOTE
l Port silkscreens are listed in Table 3-5. For details about these ports, see the description of each controlboard.
l The service boards supported by the MA5616 vary depending on the control board configured on theMA5616. For details, see 3.3 Mapping Between Boards and Control Boards.
3.5.2 H831CCUB Board DescriptionThe H831CCUB board is a centralized control unit board. It manages the broadband serviceboards, narrowband service boards, and various interface modules. Using different daughterboards, the H831CCUB board supports GPON or GE ports for transmitting services upstreamor cascading devices.
Feature and SpecificationsFor details, see Differences Between Control Boards.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
35
Power ConsumptionFor details, see Power Consumption of boards.
Working PrinciplesFigure 3-6 shows the working principles of the H831CCUB board.
Figure 3-6 Working principles of the H831CCUB board
Bac
kpla
ne c
onne
ctor
-48V, +3.3 V
Control module
Backplane User side
Upstream/cascading
device
Environment monitoring
device
Maintenance terminal
Digital sensor
Service board
DC power
H831CCUB
Switching module
Interface module
Power module
Clock module
Backplane port bus
Upstream/Cascading port
ESC serial port
Maintenance serial/ethernet port
Digital parameter port
The basic working principles of the H831CCUB board are as follows:
l The switch module converts the data of the upstream daughter board and downstreamservice boards.
l The interface module controls GE cascading and GE optical ports on the upstreamdaughter board.
l The control module controls and manages the upstream daughter board, downstreamservice boards, and logic function modules.
l The power module controls the power supply fed from the backplane and powers theupstream daughter board and other function modules of the board.
l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
36
Front Panel Port
Figure 3-7 Front panel of the H831CCUB board (holding the H831GP1A daughter board)
1000M/100M/10M full-duplex, adaptive between upstream Ethernet port and cascading Ethernet port (RJ45 port)
Connected the Ethernet port of an upper-layer or cascaded device
GE upstream or cascading optical port (SFP port), multiplexed with the GE0 portConnected to the optical port of an upper-layer or cascaded device.
PON upstream optical port (SFF port)Connected to the PON port of the upper-layer device
This button is used to reset the board manually. Resetting the board interrupts the services. Hence, exercise caution when using the reset button.
10/100/1000M Base-T maintenance network port (RJ45 port)
Connected to the Ethernet port of the maintenance terminal
Maintenance serial port (RS-232 serial port)Connected to the serial port of the
maintenance terminal
RS-485 monitoring serial portConnected to the serial port
of the monitored device
Environment monitoring port (RJ45 port)Connected to digital sensors
Figure 3-8 Front panel of the H831CCUB board (holding the H831GE1A daughter board)
1000M/100M/10M full-duplex, adaptive between upstream Ethernet port and
cascading an Ethernet port (RJ45 port)Connected the Ethernet port on an
upper-layer or cascaded device
GE upstream or cascading an optical port (SFP port), multiplexed with the GE0 portConnected to the optical port on an upper-layer or cascaded device.
GE upstream optical port (SFP port)Connected to the optical port on an upper-layer device
100M Base-T maintenance network port (RJ45 port)
Connected to the Ethernet port on the maintenance terminal
Maintenance serial port(RS-232 serial port)Connected to the serial port on the
maintenance terminal
RS-485 monitoring serial portConnected to the serial port on the monitored device
Environment monitoring port (RJ45 port) Connected to digital sensors
This button is used to reset the board manually. Resetting the board interrupts the services. Exercise caution when deciding to press the reset button.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
37
IndicatorIndicator
Name Color Status Meaning Holding theH831GP1Adaughterboard
Holding theH831GE1Adaughterboard
RUNALM
Runningstatus LED
Green Blinking (onfor 0.25s andoff for 0.25srepeatedly)
The boardstarts up andis beingloaded.
Supported
Supported
Green Blinking (onfor 1s andoff for 1srepeatedly)
The board isrunningproperly.
Red On The board isfaulty.
LINK link statusLED
Green On The linkfunctionsproperly.
GEopticalportandPONport
GEopticalport
Green Off The linkmalfunctions.
ACT Data statusLED (GEoptical port)
Green Blinking Data isbeingtransmitted.
Supported
Supported
Green Off No data isbeingtransmitted.
AUTH
Authentication LED (PONport)
Green Blinking (onfor 0.25s andoff for 0.25srepeatedly)
Anauthentication is beingperformed.
Supported
Notsupported
Green On Anauthentication issuccessful.
Green Off Noauthentication is beingperformed.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
38
Indicator
Name Color Status Meaning Holding theH831GP1Adaughterboard
Holding theH831GE1Adaughterboard
ETH ETH portstatusindicator
Green On Aconnectionis set up onthe port.
Supported
Supported
Green Off Noconnectionis set up onthe port.
Yellow Blinking The port istransmittingor receivingdata.
Yellow Off No data isbeingtransmittedon the port
GE0 GE electricalport statusindicator
Green On Aconnectionis set up onthe port.
Supported
Supported
Green Off Noconnectionis set up onthe port.
Yellow Blinking The port istransmittingor receivingdata.
Yellow Off No data isbeingtransmittedon the port
Pin AssignmentTable 3-6 describes the pin assignments of the ALARM port on the front panel of theH831CCUB board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
39
Table 3-6 Pin assignments of the ALARM port
Port Pin Signal Default Setting
12345678
1 MONITOR 0 None
2 RTN
3 MONITOR 1 Door
4 RTN
5 MONITOR 2 Arrester
6 RTN
7 MONITOR 3 Wiring
8 RTN
NOTE
l Default settings in Table 3-6 are recommended values. In practice, the ALARM port is connected todifferent types of digital sensors as required.
l When the default setting of a pair of pins is different from the actual sensor corresponding to the pairof pins, the default setting needs to be changed using the CLI so that it is the same as the actualsetting.
l Each digital sensor corresponds to a pair of pins (negative power is supplied to the pins). When thepins are short-circuited, the corresponding digital parameter is 0. When the pins are open-circuited,the corresponding digital parameter is 1.
GE optical moduleA GE optical module can be configured on an H831CCUB that is equipped with the GP1AorGE1A daughter board, H831CCUC or H831CCUE that is equipped with the UP2A or UP2Cdaughter board, or H831EIUD board. The optical module with independent receive andtransmit functions is connected to two LC/PC optical fibers to provide one GE channel, andthe optical module with combined receive and transmit functions is connected to one LC/PCoptical fiber to provide one GE channel. Table 3-7 lists the specifications of GE opticalmodules.
Table 3-7 Specifications of GE optical modules
Type Two-fiber bi-directionaloptical module
One-fiber bi-directional optical module
No. 1 2 3 4 5 6 7
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
40
OperatingWavelength
850nm
1310nm
1310nm
Tx:1310nmRx:1490nm
Tx:1490nmRx:1310nm
Tx: 1310nmRx: 1490nm
l Tx:1310nmRx:1550nm
l Tx:1550nmRx:1310nm
EncapsulationType
eSFP eSFP eSFP eSFP eSFP CSFP eSFP
Rate 2.125Gbit/s1.25Gbit/s1.063Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25 Gbit/s 1.25 Gbit/s
MinimumOutputOpticalPower
-9.5dBm
-9.0dBm
-5.0dBm
-9.0dBm
-9.0dBm
-9.0 dBm -3.0 dBm
MaximumOutputOpticalPower
-2.5dBm
-3.0dBm
0 dBm -3.0dBm
-3.0dBm
-3.0 dBm 2 dBm
MaximumReceiverSensitivity
-17.0dBm
-20.0dBm
-23.0dBm
-19.5dBm
-19.5dBm
-24.0 dBm -25.0 dBm
OpticalConnector Type
LC/PC LC/PC LC/PC LC/PC LC/PC LC LC
OpticalFiberType
Multi-mode
Single-mode
Single-mode
Single-mode
Single-mode
Single-mode Single-mode
Reach 0.50km
10.0km
40.0km
10.0km
10.0km
10.0 km 40.0 km
Overload opticalpower
0 dBm -3.0dBm
-3.0dBm
-3.0dBm
-3.0dBm
-3.0 dBm -3.0 dBm
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
41
Supported Software Version
V800R310C00, V800R311C00, V800R312C00, V800R313C00, V800R313C10,V800R015C00, V800R015C10 and V800R017C10.
NOTE
The MA5616 (equipped with a CCUB control board) in V800R015C10 supports only GP1A, VDSH, VDLF,and PDIA boards.
3.5.3 H831CCUC Board DescriptionH831CCUC is a centralized control unit board. It is used to manage the broadband serviceboards, narrowband service boards, and various interface modules. Using different daughterboards, the H831CCUC board supports GPON or GE adaptive ports for transmitting servicesupstream or cascading devices.
Functions and Specifications
For details, see Differences Between Control Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-9 shows the working principles of the H831CCUC board.
Figure 3-9 Working principles of the H831CCUC board
Bac
kpla
ne c
onne
ctor
-48V,+3.3 V
Upstream daughter
board
Control and service processing module
Logic module
Voicedaughter
board
Lower-layer clock device
H831CCUCBackplane User side
DC power
Service board
Power module
Clock module
Upstream/Cascading port
ESC serial port
Maintenance serial/ethernet port
Digital parameter port
Clock/Time port
GE electrical port
Upstream/cascading
device
Environment monitoring
device
Maintenance terminal
Digital sensor
Backplane port bus
The basic working principles of the H831CCUC board are as follows:
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
42
l The voice daughter board provides a built-in DSP chip, processes voice frequency,signals, and converts digital signals into VoIP packets.
l The upstream daughter board provides two SFP ports and supports GPON or GEadaptive ports for upstream transmission.
l The control and service processing module manages other function modules of the boardusing its management interface, and also connects to the service boards using its serviceinterface for service processing.
l The logic module controls clock source selection and board resetting.l The power module controls the power supply fed from the backplane and powers the
upstream daughter board and other function modules of the H831CCUC board.l The clock module provides unified clock signals for other function modules of the
H831CCUC board.
Front Panel Port
1000M full-duplex, adaptive upstream or cascading Ethernet port (RJ45 port). Either
this port or port 0 can be usedConnected to the Ethernet port on an
upper-layer or cascaded device
GPON or GE adaptive port 0 (SFP port)Connected to the optical port of an upper-layer or cascaded device.
GPON or GE adaptive port 1 (SFP port)Connected to the optical port on an upper-layer device CLK/TOD Port (RJ45 port)
Connected to a lower-layer clock device.
100M Base-T maintenance network port (RJ45 port)
Connected to the Ethernet port of the maintenance terminal
Console maintenance serial port (RJ45 port)
Connected to the serial port of the maintenance terminal
Monitoring serial port (RJ45 port)Connected to the serial port
of the monitored device
Environment monitoring port (RJ45 port)Connected to digital sensors
This button is used to reset the board manually. Resetting the board interrupts the services. Exercise caution when deciding to press the reset button.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
43
NOTE
l CON/ESC (RJ45 port): use a local maintenance and environment monitoring combo cable toconnect a maintenance terminal and an environment monitoring device.
l 0 (SFP port): when functioning as a GE port, either this port or GE (RJ45 port) can be used.
l Different optical modules can be configured for different application scenarios.
l For details about the parameters and supported cables of the optical modules, see "Optical Module".
IndicatorIndicator
Name Color Status Meaning
RUN/ALM
Running statusLED
Green Blinking (on for 0.25sand off for 0.25srepeatedly)
The board starts upand is being loaded.
Green Blinking (on for 1sand off for 1srepeatedly)
The board is runningproperly.
Red On The board is faulty.
SYNC Synchronizationstatus indicator
Green On The system issynchronized.
Red On The system is notsynchronized.
LINK Link status LED(GE optical portand PON port)
Green On The link functionsproperly and aconnection is set upon the port.
Green Off The link malfunctionsand no connectionsare set up on the port.
ACT Data status LED(GE optical port)
Green Blinking Data is beingtransmitted.
Green Off No data is beingtransmitted.
AUTH AuthenticationLED (PON port)
Green Blinking (on for 0.25sand off for 0.25srepeatedly)
An authentication isbeing performed.
Green On An authentication issuccessful.
Green Off No authentication isbeing performed.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
44
Pin Assignment
Table 3-8 lists pin assignments of the ALARM port on the H831CCUC board.
Table 3-8 Pin assignments of the ALARM port
Port Pin Signal Default Setting
12345678
1 RTN -
2 MONITOR 0
3 RTN Door
4 MONITOR 1
5 RTN Surge protection device(SPD)
6 MONITOR 2
7 RTN MDF
8 MONITOR 3
NOTE
l Default settings in Table 3-8 are recommended values. In practice, the ALARM port is connected todifferent types of digital sensors as required.
l When the default setting of a pair of pins is different from the actual sensor corresponding to the pairof pins, the default setting needs to be changed using the CLI so that it is the same as the actualsetting.
l Each digital sensor corresponds to a pair of pins. When the pins are short-circuited, thecorresponding digital parameter is 0. When the pins are open-circuited, the corresponding digitalparameter is 1.
GPON optical module
If an optical module for GPON upstream transmission is configured on an H831CCUC orH831CCUE board that is equipped with the UP2A or UP2C daughter board, connect oneSC/PC optical fiber to the board for GPON upstream transmission. Table 3-9 lists thespecifications of GPON optical modules.
Table 3-9 Specifications of GPON optical modules
Type One-fiber bi-directional optical module
OperatingWavelength
Tx: 1310 nmRx: 1490 nm
Encapsulation Type SFP
Rate Tx: 1.244 Gbit/sRx: 2.488 Gbit/s
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
45
Minimum OutputOptical Power
0.5 dBm
Maximum OutputOptical Power
5.0 dBm
Maximum ReceiverSensitivity
-27.0 dBm
Optical ConnectorType
SC/PC
Optical Fiber Type Single-mode
Reach 20.0 km
Overload opticalpower
-8 dBm
GE Electrical Module
If a GE electrical module is configured on an H831CCUC board that is equipped with theUP2A or UP2C daughter board, connect one network cable to the board for one-channel GE.Table 3-10 the specifications of GE electrical module.
Table 3-10 Specifications of GE electrical modules
Type Module with 1000 Base-T RJ45 electrical port
Encapsulation Type SFP
Rate Full-duplex 1000 Mbit/s
Reach 100.0 m
GE optical module
A GE optical module can be configured on an H831CCUB that is equipped with the GP1AorGE1A daughter board, H831CCUC or H831CCUE that is equipped with the UP2A or UP2Cdaughter board, or H831EIUD board. The optical module with independent receive andtransmit functions is connected to two LC/PC optical fibers to provide one GE channel, andthe optical module with combined receive and transmit functions is connected to one LC/PCoptical fiber to provide one GE channel. Table 3-11 lists the specifications of GE opticalmodules.
Table 3-11 Specifications of GE optical modules
Type Two-fiber bi-directionaloptical module
One-fiber bi-directional optical module
No. 1 2 3 4 5 6 7
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
46
OperatingWavelength
850nm
1310nm
1310nm
Tx:1310nmRx:1490nm
Tx:1490nmRx:1310nm
Tx: 1310nmRx: 1490nm
l Tx:1310nmRx:1550nm
l Tx:1550nmRx:1310nm
EncapsulationType
eSFP eSFP eSFP eSFP eSFP CSFP eSFP
Rate 2.125Gbit/s1.25Gbit/s1.063Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25 Gbit/s 1.25 Gbit/s
MinimumOutputOpticalPower
-9.5dBm
-9.0dBm
-5.0dBm
-9.0dBm
-9.0dBm
-9.0 dBm -3.0 dBm
MaximumOutputOpticalPower
-2.5dBm
-3.0dBm
0 dBm -3.0dBm
-3.0dBm
-3.0 dBm 2 dBm
MaximumReceiverSensitivity
-17.0dBm
-20.0dBm
-23.0dBm
-19.5dBm
-19.5dBm
-24.0 dBm -25.0 dBm
OpticalConnector Type
LC/PC LC/PC LC/PC LC/PC LC/PC LC LC
OpticalFiberType
Multi-mode
Single-mode
Single-mode
Single-mode
Single-mode
Single-mode Single-mode
Reach 0.50km
10.0km
40.0km
10.0km
10.0km
10.0 km 40.0 km
Overload opticalpower
0 dBm -3.0dBm
-3.0dBm
-3.0dBm
-3.0dBm
-3.0 dBm -3.0 dBm
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
47
Supported Software VersionV800R310C00, V800R311C00, V800R312C00, V800R313C00, V800R313C10,V800R015C00, V800R018C00 and V800R018C10.
3.5.4 H831CCUE Board DescriptionH831CCUE is a centralized control unit board. It is used to manage the broadband serviceboards, narrowband service boards, and various interface modules. Using different daughterboards, the H831CCUE board supports GPON, GE, 10GE or XG-PON adaptive ports fortransmitting services upstream or cascading devices. The H831CCUE control board supportsthe vectoring function by working with the enhanced subrack, the PDVAA power board, andvectoring service boards.
Functions and SpecificationsFor details, see Differences Between Control Boards.
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-10 shows the working principles of the H831CCUE board.
Figure 3-10 Working principles of the H831CCUE board
Bac
kpla
ne c
onne
ctor
-48V,+3.3 V
Upstream daughter
board
Control and service processing module
Logic module
Voicedaughter
board
Lower-layer clock device
H831CCUEBackplane User side
DC power
Service board
Power module
Clock module
Upstream/Cascading port
ESC serial port
Maintenance serial/ethernet port
Digital parameter port
Clock/Time port
GE electrical port
Upstream/cascading
device
Environment monitoring
device
Maintenance terminal
Digital sensor
Backplane port bus
The basic working principles of the H831CCUE board are as follows:
l The voice daughter board provides a built-in DSP chip, processes voice frequency,signals, and converts digital signals into VoIP packets.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
48
l The upstream daughter board:– The MA5616 provides two SFP ports and supports GPON or GE ports for upstream
transmission when the H831UP2A, H831UP2C, H831UP2AA, or H831UP2CAdaughter board is configured.
– The MA5616 provides one SFP port and supports XG-PON port for upstreamtransmission when the H833XP1A daughter board is configured.
– The MA5616 provides four CSFP port and supports GE ports or two SFP+ port andsupports 10GE ports for upstream transmission when the H831GE4A daughterboard is configured.
– The voice service daughter boards H836ASDA, H836ASDC, H836ASDM, andH836ASDF are configured.
l The control and service processing module manages other function modules of the boardusing its management interface, and also connects to the service boards using its serviceinterface for service processing.
l The logic module controls clock source selection and board resetting.l The power module controls the power supply fed from the backplane and powers the
upstream daughter board and other function modules of the H831CCUE board.l The clock module provides unified clock signals for other function modules of the
H831CCUE board.
Front Panel Port
Figure 3-11 Front panel of the H831CCUE board (equipped with an H831UP2A orH83UP2C upstream daughter board)
1000M full-duplex, adaptive upstream or cascading Ethernet ports (RJ45 port) Either this port or port 0 can be used.
Connected to the Ethernet port on an upper-layer or cascaded device
GPON or GE adaptive port 0 (SFP port)Connected to the optical port on an upper-layer or cascaded device
GPON or GE adaptive port 1 (SFP port)Connected to the optical port on the upper-layer device
CLK/TOD port (RJ45 port)Connected to a lower-layer
clock device
100 Base-T maintenance network port (RJ45 port)
Connected to the Ethernet port on the maintenance terminal
CONSOLE mintenance serial port (RJ45 port)
Connected to the serial port of the maintenance terminal
Monitoring serial port (RJ45 port)Connected to the serial port on the monitored
device
Environment monitoring port (RJ45 port) Connected to digital sensors
This button is used to reset the board manually. Resetting the board interrupts the services. Exercise caution when deciding to press the reset button.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
49
Figure 3-12 Front panel of the H831CCUE board (equipped with an H833XP1A daughterboard)
XG-PON upstream port (SFP port)Connected to the XG-PON port on an upper-layer or cascaded device
1000M full-duplex, adaptive upstream or cascading Ethernet port (RJ45 port)
Either this port or port 0 can be used.Connected to the Ethernet port on an
upper-layer or cascaded device
CLK/TOD port (RJ45 port)Connected to a lower-layer
clock device
10/100/1000M Base-T maintenance network port (RJ45 port)
Connected to the Ethernet port on the maintenance terminal
CONSOLE maintenance serial port (RJ45 port)
Connected to the serial port on the maintenance terminal
Monitoring serial port (RJ45 port)Connected to the serial port
on the monitored device
Environment monitoring port (RJ45 port) Connected to digital sensors
This button is used to reset the board manually. Resetting the board interrupts the services. Exercise caution when deciding to press the reset button.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
50
Figure 3-13 Front panel of the H831CCUE board (equipped with an H831GE4A daughterboard)
NOTE
l Different optical modules can be configured for different application scenarios.
l For details about the parameters and supported cables of the optical modules, see "Optical Module".
l CON/ESC (RJ45 port): use a local maintenance and environment monitoring combo cable toconnect a maintenance terminal and an environment monitoring device.
Indicator
Indicator
Name Color Status Meaning ConfiguredwithH831UP2A orUP2Cdaughterboard
ConfiguredwithH833XP1Adaughterboard
RUN/ALM
Runningstatusindicator
Green Blinking (onfor 0.25s andoff for 0.25srepeatedly)
The boardstarts up andis beingloaded.
Supported
Supported
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
51
Indicator
Name Color Status Meaning ConfiguredwithH831UP2A orUP2Cdaughterboard
ConfiguredwithH833XP1Adaughterboard
Green Blinking (onfor 1s andoff for 1srepeatedly)
The boardfunctionsproperly.
Red On The board isfaulty.
SYNC Synchronization statusindicator
Green On The systemissynchronized.
Supported
Supported
Red On The systemis notsynchronized.
LINK link statusindicator
Green On The linkfunctionsproperly anda connectionis set up onthe port.
GEopticalportandPONport
10GGPONopticalport
Green Off The linkmalfunctionsand noconnectionsare set up onthe port.
ACT Data statusindicator (GEoptical port)
Green Blinking Data isbeingtransmitted.
Supported
Notsupported
Green Off No data isbeingtransmitted.
AUTH
Authentication indicator
Green Blinking (onfor 0.25s andoff for 0.25srepeatedly)
Anauthentication is beingperformed.
PONport
10GGPONopticalport
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
52
Indicator
Name Color Status Meaning ConfiguredwithH831UP2A orUP2Cdaughterboard
ConfiguredwithH833XP1Adaughterboard
Green On Anauthentication issuccessful.
Green Off Noauthentication is beingperformed.
ETH ETH portstatusindicator
Green On Aconnectionis set up onthe port.
Supported
Supported
Green Off Noconnectionis set up onthe port.
Yellow Blinking The port istransmittingor receivingdata.
Yellow Off No data isbeingtransmittedon the port
GE GE electricalport statusindicator
Green On Aconnectionis set up onthe port.
Supported
Supported
Green Off Noconnectionis set up onthe port.
Yellow Blinking The port istransmittingor receivingdata.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
53
Indicator
Name Color Status Meaning ConfiguredwithH831UP2A orUP2Cdaughterboard
ConfiguredwithH833XP1Adaughterboard
Yellow Off No data isbeingtransmittedon the port
Pin AssignmentsTable 3-12 describes the pin assignments of the ALARM port on the H831CCUE board.
Table 3-12 Pin assignments of the ALARM port
Port Pin Signal Default Setting
12345678
1 RTN -
2 MONITOR 0
3 RTN Door
4 MONITOR 1
5 RTN Surge protection device(SPD)
6 MONITOR 2
7 RTN MDF
8 MONITOR 3
NOTE
l Default settings in Table 3-12 are recommended values. In practice, the ALARM port is connectedto different types of digital sensors as required.
l When the default setting of a pair of pins is different from the actual sensor corresponding to the pairof pins, the default setting needs to be changed using the CLI so that it is the same as the actualsetting.
l Each digital sensor corresponds to a pair of pins. When the pins are short-circuited, thecorresponding digital parameter is 0. When the pins are open-circuited, the corresponding digitalparameter is 1.
GPON optical moduleIf an optical module for GPON upstream transmission is configured on an H831CCUC orH831CCUE board that is equipped with the UP2A or UP2C daughter board, connect one
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
54
SC/PC optical fiber to the board for GPON upstream transmission. Table 3-13 lists thespecifications of GPON optical modules.
Table 3-13 Specifications of GPON optical modules
Type One-fiber bi-directional optical module
OperatingWavelength
Tx: 1310 nmRx: 1490 nm
Encapsulation Type SFP
Rate Tx: 1.244 Gbit/sRx: 2.488 Gbit/s
Minimum OutputOptical Power
0.5 dBm
Maximum OutputOptical Power
5.0 dBm
Maximum ReceiverSensitivity
-27.0 dBm
Optical ConnectorType
SC/PC
Optical Fiber Type Single-mode
Reach 20.0 km
Overload opticalpower
-8 dBm
GE Electrical ModuleIf a GE electrical module is configured on an H831CCUC board that is equipped with theUP2A or UP2C daughter board, connect one network cable to the board for one-channel GE.Table 3-14 the specifications of GE electrical module.
Table 3-14 Specifications of GE electrical modules
Type Module with 1000 Base-T RJ45 electrical port
Encapsulation Type SFP
Rate Full-duplex 1000 Mbit/s
Reach 100.0 m
GE optical moduleA GE optical module can be configured on an H831CCUB that is equipped with the GP1AorGE1A daughter board, H831CCUC or H831CCUE that is equipped with the UP2A or UP2C
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
55
daughter board, or H831EIUD board. The optical module with independent receive andtransmit functions is connected to two LC/PC optical fibers to provide one GE channel, andthe optical module with combined receive and transmit functions is connected to one LC/PCoptical fiber to provide one GE channel. Table 3-15 lists the specifications of GE opticalmodules.
Table 3-15 Specifications of GE optical modules
Type Two-fiber bi-directionaloptical module
One-fiber bi-directional optical module
No. 1 2 3 4 5 6 7
OperatingWavelength
850nm
1310nm
1310nm
Tx:1310nmRx:1490nm
Tx:1490nmRx:1310nm
Tx: 1310nmRx: 1490nm
l Tx:1310nmRx:1550nm
l Tx:1550nmRx:1310nm
EncapsulationType
eSFP eSFP eSFP eSFP eSFP CSFP eSFP
Rate 2.125Gbit/s1.25Gbit/s1.063Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25 Gbit/s 1.25 Gbit/s
MinimumOutputOpticalPower
-9.5dBm
-9.0dBm
-5.0dBm
-9.0dBm
-9.0dBm
-9.0 dBm -3.0 dBm
MaximumOutputOpticalPower
-2.5dBm
-3.0dBm
0 dBm -3.0dBm
-3.0dBm
-3.0 dBm 2 dBm
MaximumReceiverSensitivity
-17.0dBm
-20.0dBm
-23.0dBm
-19.5dBm
-19.5dBm
-24.0 dBm -25.0 dBm
OpticalConnector Type
LC/PC LC/PC LC/PC LC/PC LC/PC LC LC
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
56
OpticalFiberType
Multi-mode
Single-mode
Single-mode
Single-mode
Single-mode
Single-mode Single-mode
Reach 0.50km
10.0km
40.0km
10.0km
10.0km
10.0 km 40.0 km
Overload opticalpower
0 dBm -3.0dBm
-3.0dBm
-3.0dBm
-3.0dBm
-3.0 dBm -3.0 dBm
10GE Optical ModuleThe 10GE optical module is connected to two LC fibers to provide one 10GE channel. Table3-16 lists the specifications of 10GE optical modules.
Table 3-16 Specifications of 10GE optical modules
Type One-fiber bi-directional optical module
No. 1 2
Operating Wavelength Tx: 1270 nmRx: 1330 nm
Tx: 1270 nmRx: 1330 nm
Encapsulation Type eSFP eSFP
Rate 9.95-10.3 Gbit/s 2.5-11.3 Gbit/s
Minimum OutputOptical Power
0.0 dBm -8.2 dBm
Maximum OutputOptical Power
5.0 dBm 0.5 dBm
Maximum ReceiverSensitivity
-18.0 dBm -14.4 dBm
Optical Connector Type LC LC
Optical Fiber Type Single-mode Single-mode
Reach 40.0 km 10.0 km
Overload optical power -9.0 dBm 0.5 dBm
CSFP Optical ModuleThe CSFP optical module is connected to two LC fibers to provide two GE channel. Table3-17 lists the specifications of CSFP optical modules.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
57
Table 3-17 Specifications of CSFP optical modules
Type One-fiber bi-directional optical module
Operating Wavelength Tx: 1310 nmRx: 1490 nm
Encapsulation Type CSFP
Rate 1.25 Gbit/s
Minimum Output Optical Power –9.0 dBm
Maximum Output Optical Power –3.0 dBm
Maximum Receiver Sensitivity -24.0 dBm
Optical Connector Type LC
Optical Fiber Type Single-mode
Reach 10.0 km
Overload optical power -3.0 dBm
Supported Software Version
V800R311C01 and later
3.5.5 Daughter BoardThe control board supports upstream daughter boards and voice daughter boards.
Positions of the Daughter Boards
Figure 3-14 shows the positions of the daughter boards on the control board.
Figure 3-14 Positions of the daughter boards on the control board
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
58
NOTE
l A faulty upstream daughter board can be replaced with a daughter board only of the same type.
l The original upstream mode can be changed by replacing an upstream daughter board (H831GP1Aor H831GE1A). After the replacement, adjust the original upstream network. In addition, cleardevice data, reset the device, and configure services on the device because the original data andservices cannot be used.
Ports and FunctionsTable 3-18 lists the ports and functions provided by the daughter boards on the control board.
Table 3-18 Ports and functions provided by the daughter boards on the control board
DaughterBoard
Compatibilitywith the ControlBoard
Port Function
H831GP1A
CCUB One GPON port andone GE optical portl GE0 (SFP port)l GPON (SFF
port)
l The GE0 port transmitsservices upstream or cascadesdevices.
l The GPON port transmitsservices upstream.
H831GE1A
CCUB Two GE opticalportsl GE0 (SFP port)l GE1 (SFP port)
l The GE0 port transmitsservices upstream or cascadesdevices.
l The GE1 port transmitsservices upstream.
H831UP2A
CCUCCCUE
Two adaptive opticalportsl 0 (SFP port)l 1 (SFP port)
The two adaptive optical portstransmit services upstream orcascade devices. An H831UP2Aboard can be replaced with anH831UP2AA board.
H831UP2C
CCUCCCUE
Two adaptive opticalportsl 0 (SFP port)l 1 (SFP port)
The two adaptive optical portstransmit services upstream orcascade devices and support theStratum 3 clock synchronization.An H831UP2C board can bereplaced with an H831UP2CAboard.
H831UP2AA
CCUE Two adaptive opticalportsl 0 (SFP port)l 1 (SFP port)
The two adaptive optical portstransmit services upstream orcascade devices and supportvectoring.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
59
DaughterBoard
Compatibilitywith the ControlBoard
Port Function
H831UP2CA
CCUE Two adaptive opticalportsl 0 (SFP port)l 1 (SFP port)
The two adaptive optical portstransmit services upstream orcascade devices. The two portssupport Stratum 3 clocksynchronization and vectoring.
H833XP1A
CCUE One XG-PON port(SFP port)
The GPON port supports XG-PON and transmits servicesupstream.
H831GE4A
CCUE Four GE ports ortwo 10GE portsl GE0 (CSFP port
or SFP port)/XGE0 (SFP+port)
l GE1 (CSFP portor SFP port)/XGE1 (SFP+port)
l GE2 (CSFP port)l GE3 (CSFP port)
The GE port transmits servicesupstream or cascades devices.l When an SFP optical module
is used, a maximum of 2-channel GE upstreamtransmission is supported,mapping software ports 0 and1 respectively.
l When an SFP+ opticalmodule is used, a maximumof 2-channel 10GE upstreamtransmission is supported,mapping software ports 0 and1 respectively.
l When a CSFP optical moduleis used, a maximum of 4-channel GE upstreamtransmission is supported,mapping software ports 0-3respectively.
H836ASDA,H836ASDC,H836ASDMandH836ASDF
H836ASDA,H836ASDC,H836ASDM arecompatibility withthe CCUB, CCUCand CCUE ControlBoardH836SDF iscompatibility withthe CCUE ControlBoard
None The board provides a built-inDSP chip to process voicefrequency and convert digitalsignals into VoIP packets.l H836ASDA/H836ASDC
board: supports up to 64 voiceusers. An H836ASDA boardcan be replaced with anH836ASDC board.
l H836ASDM board: supportsup to 104 voice users.
l H836ASDF board: supportsup to 254 voice users.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
60
3.6 VDSL2 Service BoardVDSL2 service boards provide the VDSL2 access service using broadband ports.
3.6.1 Differences Between VDSL2 Service BoardsBased on the number of supported users, VDSL2 service boards supported by the MA5616can be classified into 16-channel VDSL2 service board, 24-channel VDSL2 service board,32-channel VDSL2 service board, 48-channel VDSL2 service board, and 64-channel VDSL2service board. These boards support VDSL2 and VDSL2 over POTS/ISDN access services.
The following tables list differences between VDSL2 service boards supported by theMA5616.
Table 3-19 Differences between 64-channel VDSL2 service boards
Specifications H836VCPE H83DVCPE H83DVCPD
Applicable line 64-channel VDSL2 overPOTS
64-channel VDSL2 overPOTS
64-channel VDSL2
Vectoring Not supported Supported Supported
G.INP Supported
VDSL2 PTM bonding Not supported
INM Supported
SELT Supported
MELT Not supported
Spectrum parameterprofile
Supports VDSL2 8a, 8b, 8c, 8d, 12a, 12b, and 17a profiles.
Annex type l G.992.1 Annex A or Bl G.992.3 Annex A, L, or Ml G.992.5 Annex A or Ml G.993.2 Annex A/B
Configuration mode Supports TR129 andTR165 [2].
Supports TR129, TI, andTR165/TR252 [2].
Supports TR129, TI, andTR165/TR252 [2].
Embedded splitter Supported Supported Not supported
Temperature queryand high-temperaturealarm
Supported
Automatic powershutdown in the eventof a high temperature
Supported
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
61
Specifications H836VCPE H83DVCPE H83DVCPD
Connector Delander 64-pin
Table 3-20 Differences between 48-channel VDSL2 service boards
Specifications H83BVDMM [1] H83BVCMM H83DVCMM H83DSDMM
Applicable line 48-channel VDSL2 48-channel VDSL2 48-channel VDSL2 48-channelSuperVector
Vectoring Not supported Supported Supported Supported
G.INP Supported
VDSL2 PTMbonding
Supported (Supports the bonding of any eight ports on the MA5616 equipped with a CCUEcontrol board. And supports 8-pair bonding when being connected to the MA5694.)
INM Supported
SELT Supported
MELT Supported
Spectrumparameter profile
Supports VDSL2 8a, 8b, 8c, 8d, 12a, 12b, and 17a profiles. Supports VDSL2 8a,8b, 8c, 8d, 12a, 12b,17a, and 35bprofiles.
Annex type l G.992.1 AnnexA
l G.992.3 AnnexA, B, L, or M
l G.992.5 AnnexA, B, or M
l G.993.2 AnnexA or B
l G.992.1 AnnexA
l G.992.3 AnnexA, B, J, L, or M
l G.992.5 AnnexA, B, J, or M
l G.993.2 AnnexA or B
l G.992.1 AnnexA
l G.992.3 AnnexA/B/J/L/M
l G.992.5 AnnexA/B/J/M
l G.993.2 AnnexA/B
l G.992.1 AnnexA
l G.992.3 AnnexA/B/J/L/M
l G.992.5 AnnexA/B/J/M
l G.993.2 AnnexA/B
Configurationmode
Supports TR129, TI, and TR165/TR252 [2].
Embeddedsplitter
Not supported
Temperaturequery and high-temperaturealarm
Supported
Automatic powershutdown in theevent of a hightemperature
Supported
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
62
Specifications H83BVDMM [1] H83BVCMM H83DVCMM H83DSDMM
Connector Champ 64-pin
Table 3-21 Differences between 32-channel VDSL2 service boards
Specifications H83BVDLE H83BVDLF H83BVCLE H83BVCLF H836VCLE
Applicable line 32-channelVDSL2 overPOTS
32-channelVDSL2
32-channelVDSL2 overPOTS
32-channelVDSL2
32-channelVDSL2 overPOTS
Vectoring Not supported Notsupported
Supported Supported Not supported
G.INP Supported Supported Supported Supported Supported
VDSL2 PTMbonding
Supported (Supports the bonding of any four ports on the MA5616 equipped with aCCUE control board. And supports 8-pair bonding when being connected to theMA5694.)
INM Supported
SELT Supported
MELT Not supported
Spectrum parameterprofile
Supports VDSL2 8a, 8b, 8c, 8d, 12a, 12b, and 17a profiles.
Annex type l G.992.1Annex A
l G.992.3Annex A,L, or M
l G.992.5Annex Aor M
l G.993.2Annex Aor B
l G.992.1Annex A
l G.992.3Annex A,L, or M
l G.992.5Annex Aor M
l G.993.2Annex Aor B
l G.992.1Annex A
l G.992.3Annex A, L,or M
l G.992.5Annex A orM
l G.993.2Annex A orB
l G.992.1Annex A
l G.992.3Annex A, B,J, L, or M
l G.992.5Annex A, B,J, or M
l G.993.2Annex A/B
l G.992.1Annex A
l G.992.3Annex A, L,or M
l G.992.5Annex A orM
l G.993.2Annex A
Configuration mode Supports TR129, TI, and TR165/TR252 [2]. Supports TR129and TR165/TR252 [2].
Embedded splitter Supported(600-ohmimpedancesplitter)
Notsupported
Supported (600-ohm impedancesplitter)
Not supported Supported (600-ohm impedancesplitter)
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
63
Specifications H83BVDLE H83BVDLF H83BVCLE H83BVCLF H836VCLE
Temperature queryand high-temperature alarm
Supported
Automatic powershutdown in theevent of a hightemperature
Supported
Connector Champ 64-pin
Table 3-22 Differences between 24-channel VDSL2 service boards
Specifications H835VDSH H835VDTH H835VDSE
Applicable line 24-channel VDSL2 overPOTS
24-channel VDSL2 overISDN
24-channel VDSL2 overPOTS
Vectoring Not supported
G.INP Supported
VDSL2 PTM bonding Supported (Supports the bonding of any four ports on the MA5616 equipped with aCCUE control board. And supports 8-pair bonding when being connected to theMA5694.)
INM Supported
SELT Supported
MELT Not supported
Spectrum parameterprofile
Supports VDSL2 8a, 8b, 8c, 8d, 12a, 12b, and 17a profiles.
Annex type l G.992.1 Annex Al G.992.3 Annex A, L,
or Ml G.992.5 Annex A or
Ml G.993.2 Annex A or
B
l G.992.1 Annex Bl G.992.3 Annex Bl G.992.5 Annex Bl G.993.2 Annex A or B
l G.992.1 Annex Al G.992.3 Annex A, L, or
Ml G.992.5 Annex A or Ml G.993.2 Annex A or B
Configuration mode Supports TR129, TI, and TR165/TR252 [2].
Embedded splitter Not supported Not supported Supported (600-ohmimpedance splitter)
Temperature queryand high-temperaturealarm
Supported
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
64
Specifications H835VDSH H835VDTH H835VDSE
Automatic powershutdown in the eventof a high temperature
Supported
Connector Champ 64-pin
Table 3-23 Differences between 16-channel VDSL2 service boards
Specifications H835VDGE
Applicable line 16-channel VDSL2 over POTS
Vectoring Not supported
G.INP Supported
VDSL2 PTM bonding Supported (Supports the bonding of any four ports on the MA5616 equippedwith a CCUE control board. And supports 8-pair bonding when being connectedto the MA5694.)
INM Supported
SELT Supported
MELT Not supported
Spectrum parameter profile Supports VDSL2 8a, 8b, 8c, 8d, 12a, 12b, 17a, and 30a profiles.
Annex type l G.992.1 Annex Al G.992.3 Annex A, L, or Ml G.992.5 Annex A or Ml G.993.2 Annex A or B
Configuration mode Supports TR129, TI, and TR165/TR252 [2].
Embedded splitter Supported (600-ohm impedance splitter)
Temperature query andhigh-temperature alarm
Supported
Automatic power shutdownin the event of a hightemperature
Supported
Connector Champ 64-pin
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
65
NOTE
l [1]: When AC power supply is used, the H83BVDMM board must work with the H831PAIC powerboard.
l [2]: Users can switch a configuration mode. To do so, log in to the MA5616 as a super user and runthe switch vdsl mode to command in diagnose mode.
l Vectoring-supported service boards take effect only when they work with power boards supportingvectoring. To check whether a service board supports vectoring, see this section. To check whether apower board supports vectoring, see Differences Between Power Boards.
3.6.2 H835VDGE Board DescriptionH835VDGE is a 16-channel VDSL2 over POTS service board that provides the VDSL2 overPOTS access service. It has an embedded splitter with 600-ohm impedance.
Functions and Specifications
For details, see Differences Between VDSL2 Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-15 shows the working principles of the H835VDGE board.
Figure 3-15 Working principles of the H835VDGE board
Bac
kpla
ne c
onne
ctor Chipset
module
Splitter module
Power module
Clock module
PSTN
LINE
–48 V, +3.3 V
Protection module
PSTNdevice
VTU-R
H835VDGE
Control module
16 x (VDSL2 over POTS)
16 x POTS
Backplane port bus
Control board
DC power
User sideBackplane
The basic working principles of the H835VDGE board are as follows:
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
66
l The protection module protects and isolates the board from lightning strikes.l The control module decodes signals and monitors signals.l The splitter module separates POTS signals from combined signals (VDSL2 signals and
POTS signals).l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
67
Front Panel Port
16 channels of POTS signals
(0-15)
16 channels of VDSL2 and POTS
(0-15)
Connected to the MDF
Connected to the MDF
VD
GE
PSTN
LINE
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
68
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-24 describes the pin assignments of the PSTN and LINE ports on the front panel ofthe H835VDGE board.
Table 3-24 Pin assignments of the PSTN/LINE port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 - 16 -
63 47 31 15
62 14 46 6 30 - 14 -
61 45 29 13
60 13 44 5 28 - 12 -
59 43 27 11
58 12 42 4 26 - 10 -
57 41 25 9
56 11 40 3 24 - 8 -
55 39 23 7
54 10 38 2 22 - 6 -
53 37 21 5
52 9 36 1 20 - 4 -
51 35 19 3
50 8 34 0 18 - 2 -
49 33 17 1
Supported Software VersionAll versions
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
69
3.6.3 H835VDSE Board DescriptionH835VDSE is a 24-channel VDSL2 over POTS service board that provides the VDSL2 overPOTS access service. It has an embedded splitter with 600-ohm impedance.
Functions and Specifications
For details, see Differences Between VDSL2 Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-16 shows the working principles of the H835VDSE board.
Figure 3-16 Working principles of the H835VDSE board
Bac
kpla
ne c
onne
ctor Chipset
module
Splitter module
Power module
Clock module
PSTN
LINE
–48 V, +3.3 V
Protection module
PSTNdevice
VTU-R
H835VDSE
Control module
24 x (VDSL2 over POTS)
24 x POTS
Backplane port bus
Control board
DC power
User sideBackplane
The basic working principles of the H835VDSE board are as follows:
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.
l The control module decodes signals and monitors signals.
l The splitter module separates POTS signals from combined signals (VDSL2 signals andPOTS signals).
l The power module supplies power to other function modules of the board.
l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
70
Front Panel Port
24 channels of POTS signals
(0-23)
24 channels of VDSL2 and POTS
(0-23)
Connected to the MDF
Connected to the MDF
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
71
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-25 describes the pin assignments of the PSTN and LINE ports on the front panel ofthe H835VDSE board.
Table 3-25 Pin assignments of the PSTN/LINE port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 -
63 47 31 15
62 14 46 6 30 17 14 -
61 45 29 13
60 13 44 5 28 18 12 -
59 43 27 11
58 12 42 4 26 19 10 -
57 41 25 9
56 11 40 3 24 20 8 -
55 39 23 7
54 10 38 2 22 21 6 -
53 37 21 5
52 9 36 1 20 22 4 -
51 35 19 3
50 8 34 0 18 23 2 -
49 33 17 1
Supported Software VersionAll versions
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
72
3.6.4 H835VDSH Board DescriptionH835VDSH is a 24-channel VDSL2 over POTS service board that provides the VDSL2 overPOTS access service. It does not have an embedded splitter.
Functions and Specifications
For details, see Differences Between VDSL2 Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-17 shows the working principles of the H835VDSH board.
Figure 3-17 Working principles of the H835VDSH board
Bac
kpla
ne c
onne
ctor Chipset
module
Power module
Clock module
LINE
-48V, +3.3V
Protection module VTU-R
H835VDSH
Control module
24* (VDSL2 over POTS)
Backplane port bus
Control board
DC power
User sideBackplane
The basic working principles of the H835VDSH board are as follows:
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.
l The control module decodes signals and monitors signals.
l The power module supplies power to other function modules of the board.
l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
73
Front Panel Port
24 channels of VDSL2 (0-23)
Connected to the MDF
VDSH
xDSL
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
74
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-26 describes the pin assignments of the xDSL ports on the front panel of theH835VDSH board.
Table 3-26 Pin assignments of the xDSL port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 -
63 47 31 15
62 14 46 6 30 17 14 -
61 45 29 13
60 13 44 5 28 18 12 -
59 43 27 11
58 12 42 4 26 19 10 -
57 41 25 9
56 11 40 3 24 20 8 -
55 39 23 7
54 10 38 2 22 21 6 -
53 37 21 5
52 9 36 1 20 22 4 -
51 35 19 3
50 8 34 0 18 23 2 -
49 33 17 1
Supported Software VersionAll versions
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
75
3.6.5 H835VDTH Board DescriptionH835VDTH is a 24-channel VDSL2 over ISDN service board that provides the VDSL2 overISDN access service. It does not have an embedded splitter.
Functions and Specifications
For details, see Differences Between VDSL2 Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-18 shows the working principles of the H835VDTH board.
Figure 3-18 Working principles of the H835VDTH board
Bac
kpla
ne c
onne
ctor Chipset
module
Power module
Clock module
VDSL2
-48V,+3.3V
Protection module VTU-R
H835VDTH
Control module
24 x (VDSL2 over ISDN)
Backplane port bus
Control board
DC power
User sideBackplane
The basic working principles of the H835VDTH board are as follows:
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.
l The control module decodes signals and monitors signals.
l The power module supplies power to other function modules of the board.
l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
76
Front Panel Port
24 channels of VDSL2 (0-23)
Connected to the MDF
VDTH
xDSL
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
77
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-27 describes the pin assignments of the xDSL ports on the front panel of theH835VDTH board.
Table 3-27 Pin assignments of the xDSL port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 -
63 47 31 15
62 14 46 6 30 17 14 -
61 45 29 13
60 13 44 5 28 18 12 -
59 43 27 11
58 12 42 4 26 19 10 -
57 41 25 9
56 11 40 3 24 20 8 -
55 39 23 7
54 10 38 2 22 21 6 -
53 37 21 5
52 9 36 1 20 22 4 -
51 35 19 3
50 8 34 0 18 23 2 -
49 33 17 1
Supported Software VersionAll versions
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
78
3.6.6 H836VCLE Board DescriptionH836VCLE is a 32-channel VDSL2 over POTS service board that provides the VDSL2 overPOTS access service. It has an embedded splitter with 600-ohm impedance.
Functions and Specifications
For details, see Differences Between VDSL2 Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-19 shows the working principles of the H836VCLE board.
Figure 3-19 Working principles of the H836VCLE board
The basic working principles of the H836VCLE board are as follows:
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.
l The control module decodes signals and monitors signals.
l The splitter module separates POTS signals from combined signals (VDSL2 signals andPOTS signals).
l The power module supplies power to other function modules of the board.
l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
79
Front Panel Port
32 channels of POTS signals
(0-31)
32 channels of VDSL2 and POTS
(0-31)
Connected to the MDF
Connected to the MDF
VCLE
PSTN
LINE
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
80
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-28 describes the pin assignments of the PSTN and LINE ports on the front panel ofthe H836VCLE board.
Table 3-28 Pin assignments of the PSTN/LINE port
Pin Signal
Pin Signal
Port Pin Singal
Pin Singal
64 15 48 7 32 16 16 24
63 47 31 15
62 14 46 6 30 17 14 25
61 45 29 13
60 13 44 5 28 18 12 26
59 43 27 11
58 12 42 4 26 19 10 27
57 41 25 9
56 11 40 3 24 20 8 28
55 39 23 7
54 10 38 2 22 21 6 29
53 37 21 5
52 9 36 1 20 22 4 30
51 35 19 3
50 8 34 0 18 23 2 31
49 33 17 1
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
81
Supported Software Versionl V800R313C00SPC211 and patches later than the version having the same R version as
V800R313C00SPC211l V800R313C00SPH215 and patches later than the version having the same R version as
V800R313C00SPH215l V800R015C00SPH205 and patches later than the version having the same R version as
V800R015C00SPH205l V800R312C00 and later
3.6.7 H83BVDLE Board DescriptionH83BVDLE is a 32-channel VDSL2 over POTS service board that provides the VDSL2 overPOTS access service. It has an embedded splitter with 600-ohm impedance.
Functions and SpecificationsFor details, see Differences Between VDSL2 Service Boards.
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-20 shows the working principles of the H83BVDLE board.
Figure 3-20 Working principles of the H83BVDLE board
Bac
kpla
ne c
onne
ctor Chipset
module
Splitter module
Power module
Clock module
PSTN
LINE
-48V,+3.3V
Protection module
PSTNdevice
VTU-R
H83BVDLE
Control module
32* (VDSL2 over POTS)
32*POTS
Backplane port bus
Control board
DC power
User sideBackplane
The basic working principles of the H83BVDLE board are as follows:
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
82
l The protection module protects and isolates the board from lightning strikes.l The control module decodes signals and monitors signals.l The splitter module separates POTS signals from combined signals (VDSL2 signals and
POTS signals).l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
83
Front Panel Port
32 channels of POTS signals
(0-31)
32 channels of VDSL2 and POTS
(0-31)
Connected to the MDF
Connected to the MDF
VDLE
PSTN
LINE
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
84
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-29 describes the pin assignments of the PSTN and LINE ports on the front panel ofthe H83BVDLE board.
Table 3-29 Pin assignments of the PSTN/LINE port
Pin Signal
Pin Signal
Port Pin Singal
Pin Singal
64 15 48 7 32 16 16 24
63 47 31 15
62 14 46 6 30 17 14 25
61 45 29 13
60 13 44 5 28 18 12 26
59 43 27 11
58 12 42 4 26 19 10 27
57 41 25 9
56 11 40 3 24 20 8 28
55 39 23 7
54 10 38 2 22 21 6 29
53 37 21 5
52 9 36 1 20 22 4 30
51 35 19 3
50 8 34 0 18 23 2 31
49 33 17 1
Supported Software VersionAll versions
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
85
3.6.8 H83BVDLF Board DescriptionH83BVDLF is a 32-channel VDSL2 service board that provides the VDSL2 access service. Itdoes not have an embedded splitter.
Functions and Specifications
For details, see Differences Between VDSL2 Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-21 shows the working principles of the H83BVDLF board.
Figure 3-21 Working principles of the H83BVDLF board
Bac
kpla
ne c
onne
ctor Chipset
module
Power module
Clock module
32*VDSL2
-48V, +3.3V
Protection module VTU-R
H83BVDLF
Control module
Backplane port bus
Control board
DC power
User sideBackplane
The basic working principles of the H83BVDLF board are as follows:
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.
l The control module decodes signals and monitors signals.
l The power module supplies power to other function modules of the board.
l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
86
Front Panel Port
32 channels of VDSL2 and POTS
(0-31)
Connected to the MDF
VDLF
LINE
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
87
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-30 describes the pin assignments of the LINE ports on the front panel of theH83BVDLF board.
Table 3-30 Pin assignments of the LINE port
Pin Signal
Pin Signal
Port Pin Singal
Pin Singal
64 15 48 7 32 16 16 24
63 47 31 15
62 14 46 6 30 17 14 25
61 45 29 13
60 13 44 5 28 18 12 26
59 43 27 11
58 12 42 4 26 19 10 27
57 41 25 9
56 11 40 3 24 20 8 28
55 39 23 7
54 10 38 2 22 21 6 29
53 37 21 5
52 9 36 1 20 22 4 30
51 35 19 3
50 8 34 0 18 23 2 31
49 33 17 1
Supported Software VersionAll versions
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
88
3.6.9 H83BVCLE Board DescriptionH83BVCLE is a 32-channel VDSL2 over POTS service board that provides the VDSL2 overPOTS access service. It has an embedded splitter with 600-ohm impedance and supportsvectoring.
Functions and SpecificationsFor details, see Differences Between VDSL2 Service Boards.
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-22 shows the working principles of the H83BVCLE board.
Figure 3-22 Working principles of the H83BVCLE board
Bac
kpla
ne c
onne
ctor
Protection module
Control module
-48V, +3.3V
Chipset module
Switch module
PHY
10GKR Splitter module
VTU-R
PSTN device
PSTN 32*POTS
LINE32*VDSL2 over POTS
VCE daughter
board
H83BVCLEBackplane User side
Backplane port busControl
board
DC power
Power module
Clock module
The basic working principles of the H83BVCLE board are as follows:
l The control module decodes signals and monitors signals.l The switch module converts the port signal on the backplane to the port signal on the
chipset module, and converts the port signal on the PHY (Physical layer signalprocessing) chip to the port signal on the chipset module.
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.l The splitter module separates POTS signals from combined signals (VDSL2 signals and
POTS signals).
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
89
l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
A VCE daughter board is installed on a power board for processing vectoring signals. Thisdaughter board provides a 10 GKR port to connect to the H83BVCLE board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
90
Front Panel Port
32 channels of POTS signals
(0-31)
32 channels of VDSL2 and POTS
(0-31)
Connected to the MDF
Connected to the MDF
VCLE
PSTN
LINE
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
91
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-31 describes the pin assignments of the PSTN and LINE ports on the front panel ofthe H83BVCLE board.
Table 3-31 Pin assignments of the PSTN/LINE port
Pin Signal
Pin Signal
Port Pin Singal
Pin Singal
64 15 48 7 32 16 16 24
63 47 31 15
62 14 46 6 30 17 14 25
61 45 29 13
60 13 44 5 28 18 12 26
59 43 27 11
58 12 42 4 26 19 10 27
57 41 25 9
56 11 40 3 24 20 8 28
55 39 23 7
54 10 38 2 22 21 6 29
53 37 21 5
52 9 36 1 20 22 4 30
51 35 19 3
50 8 34 0 18 23 2 31
49 33 17 1
Supported Software VersionV800R312C00 and later
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
92
3.6.10 H83BVCLF Board DescriptionH83BVCLF is a 32-channel VDSL2 service board that provides the VDSL2 access service. Itdoes not have an embedded splitter and supports vectoring.
Functions and Specifications
For details, see Differences Between VDSL2 Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-23 shows the working principles of the H83BVCLF board.
Figure 3-23 Working principles of the H83BVCLF board
Bac
kpla
ne c
onne
ctor
Protection module
Control module
-48V、+3.3V
Chipset module
Switch module
PHY
10GKR
VTU-R32*VDSL2
VCE daughter
board
H83BVCLFBackplane User side
Backplane port busControl
board
DC power
Power module
Clock module
The basic working principles of the H83BVCLF board are as follows:
l The control module decodes signals and monitors signals.l The switch module converts the port signal on the backplane to the port signal on the
chipset module, and converts the port signal on the PHY (Physical layer signalprocessing) chip to the port signal on the chipset module.
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
93
l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
A VCE daughter board is installed on a power board for processing vectoring signals. Thisdaughter board provides a 10 GKR port to connect to the H83BVCLF board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
94
Front Panel Port
32 channels of VDSL2 (0-31) Connected to the MDF
VCLF
xDSL
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
95
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-32 describes the pin assignments of the xDSL ports on the front panel of theH83BVCLF board.
Table 3-32 Pin assignments of the xDSL port
Pin Signal
Pin Signal
Port Pin Singal
Pin Singal
64 15 48 7 32 16 16 24
63 47 31 15
62 14 46 6 30 17 14 25
61 45 29 13
60 13 44 5 28 18 12 26
59 43 27 11
58 12 42 4 26 19 10 27
57 41 25 9
56 11 40 3 24 20 8 28
55 39 23 7
54 10 38 2 22 21 6 29
53 37 21 5
52 9 36 1 20 22 4 30
51 35 19 3
50 8 34 0 18 23 2 31
49 33 17 1
Supported Software VersionV800R312C00 and later
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
96
3.6.11 H83BVDMM Board DescriptionH83BVDMM is a 48-channel VDSL2 service board that provides the VDSL2 access service.It does not have an embedded splitter.
Functions and Specifications
For details, see Differences Between VDSL2 Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-24 shows the working principles of the H83BVDMM board.
Figure 3-24 Working principles of the H83BVDMM board
Bac
kpla
ne c
onne
ctor
Protection module
Control module
–48 V,+3.3 V
Chipset module
Switch module VTU-R
48*VDSL2
H83BVDMMBackplane User side
Backplane port busControl
board
DC power
Power module
Clock module
The basic working principles of the H83BVDMM board are as follows:
l The switch module switches the interface of the backplane to the interface of the chipsetmodule.
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.l The control module decodes signals and monitors signals.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
97
l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
Front Panel Port
24 channels of VDSL2 (24-47)
Connected to the MDF
24 channels of VDSL2 (0-23)
Connected to the MDF
VDMM
xDSL1
xDSL0
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
98
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-33 describes the pin assignments of the xDSL0 port on the front panel of theH83BVDMM board.
Table 3-33 Pin assignments of the xDSL0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 -
63 47 31 15
62 14 46 6 30 17 14 -
61 45 29 13
60 13 44 5 28 18 12 -
59 43 27 11
58 12 42 4 26 19 10 -
57 41 25 9
56 11 40 3 24 20 8 -
55 39 23 7
54 10 38 2 22 21 6 -
53 37 21 5
52 9 36 1 20 22 4 -
51 35 19 3
50 8 34 0 18 23 2 -
49 33 17 1
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
99
Table 3-34 describes the pin assignments of the xDSL1 port on the front panel of theH83BVDMM board.
Table 3-34 Pin assignments of the xDSL1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 39 48 31 32 40 16 -
63 47 31 15
62 38 46 30 30 41 14 -
61 45 29 13
60 37 44 29 28 42 12 -
59 43 27 11
58 36 42 28 26 43 10 -
57 41 25 9
56 35 40 27 24 44 8 -
55 39 23 7
54 34 38 26 22 45 6 -
53 37 21 5
52 33 36 25 20 46 4 -
51 35 19 3
50 32 34 24 18 47 2 -
49 33 17 1
Supported Software Version
All versions
3.6.12 H83BVCMM Board DescriptionH83BVCMM is a 48-channel VDSL2 service board that provides the VDSL2 access service.It does not have an embedded splitter and supports vectoring.
Functions and Specifications
For details, see Differences Between VDSL2 Service Boards.
Power Consumption
For details, see Board Power Consumption.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
100
Working PrinciplesFigure 3-25 shows the working principles of the H83BVCMM board.
Figure 3-25 Working principles of the H83BVCMM board
Bac
kpla
ne c
onne
ctor
Protection module
Control module
-48V、+3.3V
Chipset module
Switch module
PHY
10GKR
VTU-R48*VDSL2
VCE daughter
board
H83BVCMMBackplane User side
Backplane port busControl
board
DC power
Power module
Clock module
The basic working principles of the H83BVCMM board are as follows:
l The control module decodes signals and monitors signals.l The switch module converts port signals on the backplane to port signals on the chipset
module, and converts port signals on the PHY chip (for processing physical layersignals) to port signals on the chipset module.
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
A VCE daughter board is installed on a power board for processing vectoring signals. Thisdaughter board provides a 10 GKR port to connect to the H83BVCMM board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
101
Front Panel Port
24 channels of VDSL2 (0-23)
24 channels of VDSL2 (24-47) Connected to the MDF
Connected to the MDF
VCMM
xDSL1
xDSL0
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
102
Indicator
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin Assignments
Table 3-35 describes the pin assignments of the xDSL0 port on the front panel of theH83BVCMM board.
Table 3-35 Pin assignments of the xDSL0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 -
63 47 31 15
62 14 46 6 30 17 14 -
61 45 29 13
60 13 44 5 28 18 12 -
59 43 27 11
58 12 42 4 26 19 10 -
57 41 25 9
56 11 40 3 24 20 8 -
55 39 23 7
54 10 38 2 22 21 6 -
53 37 21 5
52 9 36 1 20 22 4 -
51 35 19 3
50 8 34 0 18 23 2 -
49 33 17 1
Table 3-36 describes the pin assignments of the xDSL1 port on the front panel of theH83BVCMM board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
103
Table 3-36 Pin assignments of the xDSL1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 39 48 31 32 40 16 -
63 47 31 15
62 38 46 30 30 41 14 -
61 45 29 13
60 37 44 29 28 42 12 -
59 43 27 11
58 36 42 28 26 43 10 -
57 41 25 9
56 35 40 27 24 44 8 -
55 39 23 7
54 34 38 26 22 45 6 -
53 37 21 5
52 33 36 25 20 46 4 -
51 35 19 3
50 32 34 24 18 47 2 -
49 33 17 1
Supported Software Version
l V800R313C00SPC212 and patches later than the version having the same R version asV800R313C00SPC212
l V800R311C00 and later
3.6.13 H83DVCMM Board DescriptionH83DVCMM is a 48-channel VDSL2 service board that provides the VDSL2 access service.It does not have an embedded splitter. It supports vectoring and metallic line testing (MELT).
Functions and Specifications
For details, see Differences Between VDSL2 Service Boards.
Power Consumption
For details, see Board Power Consumption.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
104
Working PrinciplesFigure 3-26 shows the working principles of the H83DVCMM board.
Figure 3-26 Working principles of the H83DVCMM board
Bac
kpla
ne c
onne
ctor
Protection module
Control module
–48 V, +3.3 V
Chipset module
Switch module
PHY
10 GKR
VTU-R48 x VDSL2
VCE daughter
board
H83DVCMMBackplane User side
Backplane port busControl
board
DC power
Power module
Clock module
The basic working principles of the H83DVCMM board are as follows:
l The switch module switches the interface of the backplane to the interface of the chipsetmodule.
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.l The control module decodes signals and monitors signals.l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
A VCE daughter board is installed on a power board for processing vectoring signals. Thisdaughter board provides a 10 GKR port to connect to the H83DVCMM board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
105
Front Panel Port
24 channels of VDSL2 (0-23)
24 channels of VDSL2 (24-47) Connected to the MDF
Connected to the MDF
VCMM
xDSL1
xDSL0
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
106
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-37 and Table 3-38 describe pin assignments of the xDSL ports on the front panel ofthe H83DVCMM board.
Table 3-37 Pin assignments of the xDSL0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 -
63 47 31 15
62 14 46 6 30 17 14 -
61 45 29 13
60 13 44 5 28 18 12 -
59 43 27 11
58 12 42 4 26 19 10 -
57 41 25 9
56 11 40 3 24 20 8 -
55 39 23 7
54 10 38 2 22 21 6 -
53 37 21 5
52 9 36 1 20 22 4 -
51 35 19 3
50 8 34 0 18 23 2 -
49 33 17 1
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
107
Table 3-38 Pin assignments of the xDSL1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 39 48 31 32 40 16 -
63 47 31 15
62 38 46 30 30 41 14 -
61 45 29 13
60 37 44 29 28 42 12 -
59 43 27 11
58 36 42 28 26 43 10 -
57 41 25 9
56 35 40 27 24 44 8 -
55 39 23 7
54 34 38 26 22 45 6 -
53 37 21 5
52 33 36 25 20 46 4 -
51 35 19 3
50 32 34 24 18 47 2 -
49 33 17 1
Supported Software VersionV800R016C00 and later
3.6.14 H83DSDMM Board DescriptionH83DSDMM is a 48-channel SuperVector service board that provides the SuperVector accessservice. It does not have an embedded splitter. It supports metallic line testing (MELT).
Functions and SpecificationsFor details, see Differences Between VDSL2 Service Boards.
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-27 shows the working principles of the H83DSDMM board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
108
Figure 3-27 Working principles of the H83DSDMM board
The basic working principles of the H83DSDMM board are as follows:
l The switch module switches the interface of the backplane to the interface of the chipsetmodule.
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.l The control module decodes signals and monitors signals.l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
A VCE daughter board is installed on a power board for processing vectoring signals. Thisdaughter board provides a 10 GKR port to connect to the H83DSDMM board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
109
Front Panel Port
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
110
Pin AssignmentsTable 3-39 and Table 3-40 describe pin assignments of the xDSL ports on the front panel ofthe H83DSDMM board.
Table 3-39 Pin assignments of the xDSL0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 -
63 47 31 15
62 14 46 6 30 17 14 -
61 45 29 13
60 13 44 5 28 18 12 -
59 43 27 11
58 12 42 4 26 19 10 -
57 41 25 9
56 11 40 3 24 20 8 -
55 39 23 7
54 10 38 2 22 21 6 -
53 37 21 5
52 9 36 1 20 22 4 -
51 35 19 3
50 8 34 0 18 23 2 -
49 33 17 1
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
111
Table 3-40 Pin assignments of the xDSL1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 39 48 31 32 40 16 -
63 47 31 15
62 38 46 30 30 41 14 -
61 45 29 13
60 37 44 29 28 42 12 -
59 43 27 11
58 36 42 28 26 43 10 -
57 41 25 9
56 35 40 27 24 44 8 -
55 39 23 7
54 34 38 26 22 45 6 -
53 37 21 5
52 33 36 25 20 46 4 -
51 35 19 3
50 32 34 24 18 47 2 -
49 33 17 1
Supported Software VersionV800R016C10 and later
3.6.15 H836VCPE Board DescriptionH836VCPE is a 64-channel VDSL2 over POTS service board that provides the VDSL2 overPOTS access service. It has an embedded splitter with 600-ohm impedance.
Functions and SpecificationsFor details, see Differences Between VDSL2 Service Boards.
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-28 shows the working principles of the H836VCPE board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
112
Figure 3-28 Working principles of the H836VCPE board
The basic working principles of the H836VCPE board are as follows:
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.l The control module decodes signals and monitors signals.l The splitter module separates POTS signals from combined signals (VDSL2 signals and
POTS signals).l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
113
Front Panel Port
Connected to the MDF
32 channels of VDSL2 and POTS
(32-63)
32 channels of VDSL2 and POTS
(0-31)
32 channels of POTS (32-63)
32 channels of POTS (0-31)
Connected to the MDF
Connected to the MDF
Connected to the MDF
VCPE
PSTN
1PSTN0
LINE1
LINE0
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
114
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsThe pin assignments of LINE ports are the same as those of PSTN ports. Table 3-41 andTable 3-42 describe pin assignments of the PSTN0 and PSTN1 ports on the front panel of theH836VCPE board, respectively.
Table 3-41 Pin assignments of the PSTN0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
1 7 17 15 33 23 49 31
2 18 34 50
3 6 19 14 35 22 51 30
4 20 36 52
5 5 21 13 37 21 53 29
6 22 38 54
7 4 23 12 39 20 55 28
8 24 40 56
9 3 25 11 41 19 57 27
10 26 42 58
11 2 27 10 43 18 59 26
12 28 44 60
13 1 29 9 45 17 61 25
14 30 46 62
15 0 31 8 47 16 63 24
16 32 48 64
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
115
Table 3-42 Pin assignments of the PSTN1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
1 39 17 47 33 55 49 63
2 18 34 50
3 38 19 46 35 54 51 62
4 20 36 52
5 37 21 45 37 53 53 61
6 22 38 54
7 36 23 44 39 52 55 60
8 24 40 56
9 35 25 43 41 51 57 59
10 26 42 58
11 34 27 42 43 50 59 58
12 28 44 60
13 33 29 41 45 49 61 57
14 30 46 62
15 32 31 40 47 48 63 56
16 32 48 64
Supported Software Version
l V800R313C00SPC209 and patches later than the version having the same R version asV800R313C00SPC209
l V800R016C10SPH205 and patches later than the version having the same R version asV800R016C10SPH205
l V800R015C10 and later
3.6.16 H83DVCPE Board DescriptionH83DVCPE is a 64-channel VDSL2 over POTS service board that provides the VDSL2 overPOTS access service. It has an embedded splitter with 600-ohm impedance and supportsvectoring.
Functions and Specifications
For details, see Differences Between VDSL2 Service Boards.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
116
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-29 shows the working principles of the H83DVCPE board.
Figure 3-29 Working principles of the H83DVCPE board
Bac
kpla
ne c
onne
ctor Chipset
module
Splitter module
Power module
Clock module
PSTN
LINE
–48 V, +3.3 V
Protection module
PSTNdevice
VTU-R
H83DVCPE
Control module
64 x (VDSL2 over POTS)
64 x POTS
Backplane port busControl
board
DC power
User sideBackplane
The basic working principles of the H83DVCPE board are as follows:
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.l The control module decodes signals and monitors signals.l The splitter module separates POTS signals from combined signals (VDSL2 signals and
POTS signals).l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
117
Front Panel Port
Connected to the MDF
32 channels of VDSL2 and POTS
(32-63)
32 channels of VDSL2 and POTS
(0-31)
32 channels of POTS (32-63)
32 channels of POTS (0-31)
Connected to the MDF
Connected to the MDF
Connected to the MDF
VCPE
PSTN
1PSTN0
LINE1
LINE0
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
118
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsThe pin assignments of LINE ports are the same as those of PSTN ports. Table 3-43 andTable 3-44 describe pin assignments of the PSTN0 and PSTN1 ports on the front panel of theH83DVCPE board, respectively.
Table 3-43 Pin assignments of the PSTN0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
1 7 17 15 33 23 49 31
2 18 34 50
3 6 19 14 35 22 51 30
4 20 36 52
5 5 21 13 37 21 53 29
6 22 38 54
7 4 23 12 39 20 55 28
8 24 40 56
9 3 25 11 41 19 57 27
10 26 42 58
11 2 27 10 43 18 59 26
12 28 44 60
13 1 29 9 45 17 61 25
14 30 46 62
15 0 31 8 47 16 63 24
16 32 48 64
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
119
Table 3-44 Pin assignments of the PSTN1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
1 39 17 47 33 55 49 63
2 18 34 50
3 38 19 46 35 54 51 62
4 20 36 52
5 37 21 45 37 53 53 61
6 22 38 54
7 36 23 44 39 52 55 60
8 24 40 56
9 35 25 43 41 51 57 59
10 26 42 58
11 34 27 42 43 50 59 58
12 28 44 60
13 33 29 41 45 49 61 57
14 30 46 62
15 32 31 40 47 48 63 56
16 32 48 64
Supported Software VersionV800R016C00 and later
3.6.17 H83DVCPD Board DescriptionH83DVCPD is a 64-channel VDSL2 service board that provides the VDSL2 access service. Itdoes not have an embedded splitter and supports vectoring.
Functions and SpecificationsFor details, see Differences Between VDSL2 Service Boards.
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-30 shows the working principles of the H83DVCPD board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
120
Figure 3-30 Working principles of the H83DVCPD board
The basic working principles of the H83DVCPD board are as follows:l The chipset module implements functions, such as amplification, filtering, A/D and D/A
conversion, coding/decoding, and encapsulation/decapsulation for signals.l The protection module protects and isolates the board from lightning strikes.l The control module decodes signals and monitors signals.l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
121
Front Panel Port
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
122
Pin AssignmentsTable 3-45 and Table 3-46 describe pin assignments of the LINE0 and LINE1 ports on thefront panel of the H83DVCPD board, respectively.
Table 3-45 Pin assignments of the LINE0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
1 7 17 15 33 23 49 31
2 18 34 50
3 6 19 14 35 22 51 30
4 20 36 52
5 5 21 13 37 21 53 29
6 22 38 54
7 4 23 12 39 20 55 28
8 24 40 56
9 3 25 11 41 19 57 27
10 26 42 58
11 2 27 10 43 18 59 26
12 28 44 60
13 1 29 9 45 17 61 25
14 30 46 62
15 0 31 8 47 16 63 24
16 32 48 64
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
123
Table 3-46 Pin assignments of the LINE1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
1 39 17 47 33 55 49 63
2 18 34 50
3 38 19 46 35 54 51 62
4 20 36 52
5 37 21 45 37 53 53 61
6 22 38 54
7 36 23 44 39 52 55 60
8 24 40 56
9 35 25 43 41 51 57 59
10 26 42 58
11 34 27 42 43 50 59 58
12 28 44 60
13 33 29 41 45 49 61 57
14 30 46 62
15 32 31 40 47 48 63 56
16 32 48 64
Supported Software VersionV800R016C10 and later
3.7 ADSL2+ Service BoardADSL2+ service boards provide ADSL2+ access services using the broadband ports.
3.7.1 Differences Between ADSL2+ Service BoardsBased on the number of supported users, ADSL2+ service boards supported by the MA5616can be classified into 32-channel ADSL2+ service board and 64-channel ADSL2+ serviceboard. These boards support ADSL2+ and ADSL2+ over POTS access services.
Table 3-47 lists the differences between ADSL2+ service boards supported by the MA5616.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
124
Table 3-47 Differences between ADSL2+ service boards
Specifications H83AADLE orH835ADLE
H836ADLE H836ADPE
Applicable line 32-channel ADSL2+over POTS
32-channel ADSL2+over POTS
64-channel ADSL2+ overPOTS
Port l PSTNl LINE
G.INP Supported Not supported Not supported
INM Supported
SELT supported
MELT Not supported
Annex type l G.992.1 Annex Al G.992.3 Annex A, L, or M (EU32-EU64)l G.992.5 Annex A or M (EU32-EU64)
Configuration mode Supports RFC 2662, RFC 4706, and TR165/TR252. (Users can switch aconfiguration mode. To do so, log in to the MA5616 as a super user and runthe switch adsl mode to command in diagnose mode. The defaultconfiguration mode is RFC 2662. Considering the development trend, TR165is recommended because it is more flexible than others.)
Connector Champ 64-pin Champ 64-pin Delander 64-pin
Embedded splitter Supported (600-ohm impedance splitter)
Temperature query and high-temperature alarm
Supported
Automatic power shutdown inthe event of a high temperature
Supported
3.7.2 H83AADLE, H835ADLE, and H836ADLE Board DescriptionH83AADLE, H835ADLE, and H836ADLE are 32-channel ADSL2+ over POTS serviceboards that provide the ADSL2+ over POTS access service. They have an embedded splitterwith 600-ohm impedance.
Functions and Specifications
For details, see Differences Between ADSL2+ Service Boards.
Power Consumption
For details, see Board Power Consumption.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
125
Working PrinciplesFigure 3-31 shows the working principles of the H83AADLE, H835ADLE, and H836ADLEboards.
Figure 3-31 Working principles of the H83AADLE, H835ADLE, and H836ADLE boards
Bac
kpla
ne c
onne
ctor Interface
module
Splitter module
Power module
Clock module
PSTN 32*POTS
LINE32* (ADSL2+ over POTS)
-48V,+3.3V
Protection module
PSTN device
ATU-RBackplane port bus
H83A/H835/H836ADLE
Control module
Control board
DC power
Backplane User side
The basic working principles of the H83AADLE, H835ADLE, and H836ADLE boards are asfollows:
l The interface module isolates signals to meet board's hot swapping requirements andprovides information about board hardware management.
l The protection module protects and isolates the board from lightning strikes.l The control module controls the board software loading and board running, and manages
the board.l The splitter module separates POTS signals from combined signals (ADSL2+ signals
and POTS signals).l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
126
Front Panel Port
32 channels of POTS(0-31)
32 channels of ADSL2+ and POTS (0-31)
Connected to the MDF
Connected to the MDF
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
127
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-48 describes the pin assignments of the PSTN and LINE ports on the front panel ofthe H83AADLE, H835ADLE, and H836ADLE boards.
Table 3-48 Pin assignments of the PSTN/LINE port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 24
63 47 31 15
62 14 46 6 30 17 14 25
61 45 29 13
60 13 44 5 28 18 12 26
59 43 27 11
58 12 42 4 26 19 10 27
57 41 25 9
56 11 40 3 24 20 8 28
55 39 23 7
54 10 38 2 22 21 6 29
53 37 21 5
52 9 36 1 20 22 4 30
51 35 19 3
50 8 34 0 18 23 2 31
49 33 17 1
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
128
Supported Software Version
Boards Supported Software Version
H83AADLE V800R311C01 and later
H835ADLE All versions
H836ADLE V800R311C01 and later
3.7.3 H836ADPE Board DescriptionH836ADPE is a 64-channel ADSL2+ over POTS service board that provides the ADSL2+over POTS access services. It has an embedded splitter with 600-ohm impedance.
Functions and Specifications
For details, see Differences Between ADSL2+ Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-32 shows the working principles of the H836ADPE board.
Figure 3-32 Working principles of the H836ADPE board
Backplane connector
Interface module
Splitter module
Power module
Clock module
PSTN 64*POTS
LINE64* (ADSL2+ over POTS)
-48V,+3.3V
Protection module
PSTN device
ATU-RBackplane port bus
H836ADPE
Control module
Control board
DC power
Backplane User side
The basic working principles of the H836ADPE board are as follows:
l The interface module isolates signals to meet board's hot swapping requirements andprovides information about board hardware management.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
129
l The protection module protects and isolates the board from lightning strikes.
l The control module controls the board software loading and board running, and managesthe board.
l The splitter module separates POTS signals from combined signals (ADSL2+ signalsand POTS signals).
l The power module supplies power to other function modules of the board.
l The clock module provides working clock for other function modules of the board.
Front Panel Port
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
130
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsThe pin assignments of LINE ports are the same as those of PSTN ports. Table 3-49 andTable 3-50 describe pin assignments of the PSTN1 and LINE1 ports, and of PSTN0 andLINE0 ports on the front panel of the H836ADPE board, respectively.
Table 3-49 Pin assignments of the PSTN1/LINE1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 63 48 55 32 47 16 39
63 47 31 15
62 62 46 54 30 46 14 38
61 45 29 13
60 61 44 53 28 45 12 37
59 43 27 11
58 60 42 52 26 44 10 36
57 41 25 9
56 59 40 51 24 43 8 35
55 39 23 7
54 58 38 50 22 42 6 34
53 37 21 5
52 57 36 49 20 41 4 33
51 35 19 3
50 56 34 48 18 40 2 32
49 33 17 1
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
131
Table 3-50 Pin assignments of the PSTN0/LINE0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 31 48 23 32 15 16 7
63 47 31 15
62 30 46 22 30 14 14 6
61 45 29 13
60 29 44 21 28 13 12 5
59 43 27 11
58 28 42 20 26 12 10 4
57 41 25 9
56 27 40 19 24 11 8 3
55 39 23 7
54 26 38 18 22 10 6 2
53 37 21 5
52 25 36 17 20 9 4 1
51 35 19 3
50 24 34 16 18 8 2 0
49 33 17 1
Supported Software Version
All versions
3.8 SHDSL Service BoardSHDSL service boards provide the SHDSL access service using broadband ports.
3.8.1 H832SHLH Board DescriptionH832SHLH is a 16-channel SHDSL service board that provides the SHDSL access service.
Functions and Specificationsl 16-channel user portsl SHDSL access servicel ATM SHDSL and EFM SHDSL access modes
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
132
l 2, 3, 4 pair bondingl Port protectionl Board power-off for energy conservation
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-33 shows the working principles of the H832SHLH board.
Figure 3-33 Working principles of the H832SHLH boardB
ackp
lane
con
nect
or Interface module
Power module
Clock module
16 x SHDSL
–48 V,+3.3 V
Protection module
STU-RBackplane port bus
H832SHLH
Control module
Control board
DC power
Backplane User side
The basic working principles of the H832SHLH board are as follows:
l The chipset module implements functions, such as amplification, filtering, A/D and D/Aconversion, coding/decoding, and encapsulation/decapsulation for signals.
l The protection module protects and isolates the board from lightning strikes.l The control module decodes signals and monitors signals.l The power module supplies power to other function modules of the board.l The clock module provides working clock for other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
133
Front Panel Port
16 channels SHDSL(0-15) Connected to the MDF
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
134
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
Pin AssignmentsTable 3-51 describes the pin assignments of the xDSL ports on the front panel of theH832SHLH board.
Table 3-51 Pin assignments of the xDSL port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 - 16 -
63 47 31 15
62 14 46 6 30 - 14 -
61 45 29 13
60 13 44 5 28 - 12 -
59 43 27 11
58 12 42 4 26 - 10 -
57 41 25 9
56 11 40 3 24 - 8 -
55 39 23 7
54 10 38 2 22 - 6 -
53 37 21 5
52 9 36 1 20 - 4 -
51 35 19 3
50 8 34 0 18 - 2 -
49 33 17 1
Supported Software VersionAll versions
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
135
3.9 Ethernet Service BoardEthernet service boards are used for GE or FE signal access to implement the Ethernetservice.
3.9.1 Differences Between Ethernet Service BoardsTable 3-52 lists the differences between Ethernet service boards supported by the MA5616.
Table 3-52 Specifications of Ethernet service boards
Specifications H831EIUD H831EIUA
Number of ports 4 GE optical/electricaladaptive ports and 4 FEoptical ports
16 FE electrical ports
Optical module l GE optical port: SFPGE optical module
l FE optical port: SFP FEoptical module
Not supported
Port protection Supported Supported
Board shutdown forenergy conservation
Supported Supported
Synchronous Ethernetclock output
Supported Not supported
3.9.2 H831EIUD Board DescriptionH831EIUD is a P2P Ethernet access board. It provides four channels of GE optical orelectrical access services and four channels of FE optical access services to meet the P2Poptical access requirements of enterprise users and individual VIP users.
Functions and Specifications
For details, see Differences Between Ethernet Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-34 shows the working principles of the H831EIUD board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
136
Figure 3-34 Working principles of the H831EIUD board
Bac
kpla
ne c
onne
ctor
Power module
+3.3 V
Inte
rface
mod
ule
Ser
vice
pro
cess
ing
mod
ule
PHYchip
PHYchip
GE
ele
ctric
al
port
GE
opt
ical
po
rtFE
opt
ical
po
rt
H831EIUD User
terminal
Backplane User side
Backplane port busControl
board
DC power
FE optical signal
GE optical signal
GE electrical signal
User terminal
User terminal
The basic working principles of the H831EIUD board are as follows:
l The interface module isolates signals to meet board's hot swapping requirements andprovides information about board hardware management.
l The service processing module aggregates GE optical/electrical signals and FE opticalsignals and then transmits the aggregated signals to the control board for processing.
l The PHY chip provides data service channels that are uniformly managed by the controlboard.
l The FE optical port provides access to FE optical services and also provides portprotection.
l The GE optical port provides access to GE optical services and also provides portprotection.
l The GE electrical port provides access to GE electrical services and also provides portprotection.
l The power module supplies power to other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
137
Front Panel Port
Indicator
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
138
Indicator
Name Color Status Meaning
- Data/Linkstatusindicator
Green Blinking (1s on and 1soff)
A link has been set up on theport, and data is beingtransmitted.
Green On A link has been set up on theport, but no data is beingtransmitted.
- Off The link malfunctions andfails to set up on the port.
FE optical moduleA FE optical module can be configured on an H831EIUD board, connect one LC/PC opticalfiber to the board for one-channel FE. Table 3-53 lists the specifications of FE opticalmodules.
Table 3-53 Specifications of FE optical modules
Type One-fiber bi-directional optical module
No. 1 2
OperatingWavelength
Tx: 1310 nmRx: 1550 nm
Tx: 1550 nmRx: 1310 nm
Encapsulation Type eSFP eSFP
Rate STM-1 STM-1
Minimum OutputOptical Power
-15.0 dBm -15.0 dBm
Maximum OutputOptical Power
-8.0 dBm -8.0 dBm
Maximum ReceiverSensitivity
-32.0 dBm -32.0 dBm
Optical ConnectorType
LC/PC LC/PC
Optical Fiber Type Single-mode Single-mode
Reach 15.0 km 15.0 km
Overload opticalpower
-8 dBm -8 dBm
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
139
Supported Software Version
V800R310C00, V800R311C00, V800R312C00, and later
3.9.3 H831EIUA Board DescriptionH831EIUA is a 16-channel Ethernet access board. It provides FE electrical access services tomeet user requirements for high-speed Internet access service.
Functions and Specifications
For details, see Differences Between Ethernet Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-35 shows the working principles of the H831EIUA board.
Figure 3-35 Working principles of the H831EIUA board
Bac
kpla
ne c
onne
ctor
Power module
PHYchip
+3.3 V
Inte
rface
mod
ule
FE p
ort
H831EIUA
FE signal
DC power
Control board
Backplane port bus
BackplaneUser side
User terminal
The basic working principles of the H831EIUA board are as follows:
l The interface module isolates signals to meet board's hot swapping requirements andprovides information about board hardware management.
l The PHY chip provides data service channels for FE signals, which are uniformlymanaged by the control board.
l The FE port provides fast Ethernet access service and also provides port protection.l The power module supplies power to other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
140
Front Panel Port
Indicator
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
141
Indicator
Name Color Status Meaning
- Data/Linkstatusindicator
Green Blinking (1s on and 1soff)
A link has been set up on theport, and data is beingtransmitted.
Green On A link has been set up on theport, but no data is beingtransmitted.
- Off The link malfunctions andfails to set up on the port.
Supported Software Version
V800R310C00, V800R311C00, V800R312C00, and later
3.10 Voice Service BoardVoice service boards support VoIP POTS, ISDN BRA, ISDN PRA and R2 services.
NOTE
When voice boards are used, the control board must be equipped with a daughter board that supportsVoIP logic forwarding.
3.10.1 Differences Between Voice Service BoardsVoice service boards supported by the MA5616 are classified into four types: POTS boards,BRA, PRA, and R2.
Table 3-54 Specifications of POTS service boards
Specifications H838ASRB H837ASPB/H838ASPB/H839ASPB
Connector Champ 64-pin Champ 64-pin
Number of ports 32 64
Codec G.711AG.711UG.729G.723.1G.726
POTS MELT Supported Supported
MELT precision High High
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
142
Specifications H838ASRB H837ASPB/H838ASPB/H839ASPB
Automatic power shutdown in the event ofa high temperature
Supported Supported
Short loop Supported Supported
Polarity of wires a and b a+b-
a+b-
16/12 KC Supported Supported
Powering on/off using the CLI Supported Supported
Polarity reversal Supported Supported
Port current 20 mA, 25 mA, or30 mA
20 mA, 25 mA, or30 mA
Table 3-55 Specifications of ISDN and R2 service boards
Specifications H832DSLD H831EDTB
Types of services BRA PRA or R2
Connector Champ 64-pin Champ 64-pin
Coding mode 2B1Q E1 mode: HDB3 or AMI
Automatic powershutdown in the event ofa high temperature
Supported Supported
3.10.2 H838ASRB Board DescriptionH838ASRB is a 32-channel POTS service board and provides the POTS access service.
Functions and Specifications
For details, see Differences Between Voice Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-36 shows the working principles of the H838ASRB board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
143
Figure 3-36 Working principles of the H838ASRB board
Bac
kpla
ne c
onne
ctor
Pro
cess
ing
mod
ule
Sub
scrib
er li
ne
inte
rface
mod
ule
Power module
32 x POTS
Pro
tect
ion
mod
ule
–48 V, +3.3 V
PSTN terminal
H838ASRB
Control module
DC power
Control board
Backplane port bus
Backplane User side
+72 V, –24 V
The basic working principles of the H838ASRB board are as follows:
l The processing module processes the POTS service of the board and transmits theservice upstream using the HW interface. Using the SPI bus, this module receives theconfiguration command issued by the control module of the board and transmits theservice status information upstream.
l The subscriber line interface module provides 32-channel POTS access service.l The protection module protects and isolates the board from lightning strikes.l The control module supports the intra-board communication, service management and
control, and communication with the control board.l The power module controls the power from the backplane and supplies power to other
function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
144
Front Panel Port
32 channels of POTS (0-31)
Connected to the MDF
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
145
IndicatorIndicator Name Color Status Meaning
RUN ALM Running statusindicator
Green On The board isrunningproperly.
Red On The board isfaulty.
Pin AssignmentsTable 3-56 describes the pin assignments of the PSTN ports on the front panel of theH838ASRB board.
Table 3-56 Pin assignments of the PSTN port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 24
63 47 31 15
62 14 46 6 30 17 14 25
61 45 29 13
60 13 44 5 28 18 12 26
59 43 27 11
58 12 42 4 26 19 10 27
57 41 25 9
56 11 40 3 24 20 8 28
55 39 23 7
54 10 38 2 22 21 6 29
53 37 21 5
52 9 36 1 20 22 4 30
51 35 19 3
50 8 34 0 18 23 2 31
49 33 17 1
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
146
Supported Software Version
All versions
3.10.3 H837ASPB, H838ASPB, and H839ASPB Board DescriptionH837ASPB, H838ASPB, and H839ASPB are 64-channel POTS service boards that providethe POTS access service.
Functions and Specifications
For details, see Differences Between Voice Service Boards.
NOTE
l H837ASPB has the same functions as H838ASPB; therefore, H837ASPB can substitute forH838ASPB.
l Compared with H837ASPB and H838ASPB, H839ASPB supports direct current-isolated (DC-I)grounding.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-37 shows the working principles of the H837ASPB, H838ASPB, and H839ASPBboards.
Figure 3-37 Working principles of the H837ASPB, H838ASPB, and H839ASPB boards
Bac
kpla
ne c
onne
ctor Coding
or decoding module
Sub
scrib
er li
ne
inte
rface
mod
ule
Power module
64 x POTS
Pro
tect
ion
mod
ule
–48 V, +3.3 V
PSTN terminal
H837ASPB/H838ASPB/H839ASPB
MCU module
DC power
Control board
Backplane port bus
Backplane User side
+72 V, –24 V
The basic working principles of the H837ASPB, H838ASPB, and H839ASPB boards are asfollows:
l The codec module encodes and decodes voice signals and converts analog signals todigital signals.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
147
l The subscriber-line interface module provides access to 64 channels of POTS services.l The protection module protects and isolates the board from lightning strikes.l The MCU module processes the upper-layer protocol messages between the board and
the control board and manages user ports of the board.l The power module supplies power to other function modules of the board.
Front Panel Port
32 channels of POTS signals
(32-63)
Connected to the MDF
32 channels of POTS signals
(0-31)
Connected to the MDF
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
148
IndicatorIndicator Name Color Status Meaning
RUN ALM Running statusindicator
Green On The board isrunningproperly.
Red On The board isfaulty.
Pin AssignmentsTable 3-57 describes the pin assignments of the PSTN0 port on the front panel of theH837ASPB, H838ASPB, or H839ASPB board.
Table 3-57 Pin assignments of the PSTN0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 24
63 47 31 15
62 14 46 6 30 17 14 25
61 45 29 13
60 13 44 5 28 18 12 26
59 43 27 11
58 12 42 4 26 19 10 27
57 41 25 9
56 11 40 3 24 20 8 28
55 39 23 7
54 10 38 2 22 21 6 29
53 37 21 5
52 9 36 1 20 22 4 30
51 35 19 3
50 8 34 0 18 23 2 31
49 33 17 1
Table 3-58 describes the pin assignments of the PSTN1 port on the front panel of theH837ASPB, H838ASPB, or H839ASPB board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
149
Table 3-58 Pin assignments of the PSTN1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 47 48 39 32 48 16 56
63 47 31 15
62 46 46 38 30 49 14 57
61 45 29 13
60 45 44 37 28 50 12 58
59 43 27 11
58 44 42 36 26 51 10 59
57 41 25 9
56 43 40 35 24 52 8 60
55 39 23 7
54 42 38 34 22 53 6 61
53 37 21 5
52 41 36 33 20 54 4 62
51 35 19 3
50 40 34 32 18 55 2 63
49 33 17 1
Supported Software Version
All versions
3.10.4 H832DSLD Board DescriptionH832DSLD is an 8-channel ISDN service board. It provides the basic rate access (BRA) useraccess service. Also, it can be connected to the personal handyphone system (PHS) basestation for service transparent transmission on the U interface.
Functions and Specifications
For details, see Differences Between Voice Service Boards.
Power Consumption
For details, see Board Power Consumption.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
150
Working PrinciplesFigure 3-38 shows the working principles of the H832DSLD board.
Figure 3-38 Working principles of the H832DSLD board
Bac
kpla
ne c
onne
ctor
Processing module
Sub
scrib
er li
ne in
terfa
ce
mod
ule
Control module
Power module
ISDN8 x (2B+1D)
Logic module
BRA terminal
H832DSLD
PHS base station
8 x U
Backplane port bus
–48 V, +3.3 VDC
power
Control board
Backplane User side
+72 V, –24 V
The basic working principles of the H832DSLD board are as follows:
l The logic module implements the CESoP clock recovery and the communicationbetween the H832DSLD board and the control board.
l The processing module extracts call signaling and switches timeslots.l The subscriber interface module converts the interface coding to the interface bus data,
puts the converted data to the corresponding timeslot, and then outputs the data to thesubscriber interface.
l The control module communicates with the control board, detects the board status andperforms related control, reports the status of each module on the H832DSLD board andruns the commands issued from the control board, processes signaling of each channel,and controls data transmission and reception.
l The power module supplies power to other function modules of the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
151
Front Panel Port
8 channels of ISDN BRA signals
(0-7)
Connected to the MDF
IndicatorIndicator Name Color Status Meaning
RUN ALM Running statusindicator
Green On The board isrunningproperly.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
152
Indicator Name Color Status Meaning
Red On The board isfaulty.
Pin AssignmentsTable 3-59 describes the pin assignments of the LINE ports on the front panel of theH832DSLD board.
Table 3-59 Pin assignments of the LINE port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 - 48 7 32 - 16 -
63 47 31 15
62 - 46 6 30 - 14 -
61 45 29 13
60 - 44 5 28 - 12 -
59 43 27 11
58 - 42 4 26 - 10 -
57 41 25 9
56 - 40 3 24 - 8 -
55 39 23 7
54 - 38 2 22 - 6 -
53 37 21 5
52 - 36 1 20 - 4 -
51 35 19 3
50 - 34 0 18 - 2 -
49 33 17 1
Supported Software VersionAll versions
3.10.5 H831EDTB Board DescriptionH831EDTB is a G.SHDSL service board using IP/TDM upstream transmission, whichprovides eight G.SHDSL ports and eight E1 ports.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
153
Functions and Specifications
For details, see Differences Between Voice Service Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-39 shows the working principles of the H831EDTB board.
Figure 3-39 Working principles of the H831EDTB board
The basic working principles of the H831EDTB board are as follows:
l The control module loads and executes programs.l The forwarding module, service processing module, and service port module provide
service access and forward services. The service processing module consists of a voicemodule and an IP module. The process is as follows:– In the downstream direction, after being processed by the voice module, the voice
service is sent to an E1 or G.SHDSL port according to the preset route. The E1transparent transmission service is sent the E1 or G.SHDSL port after beingprocessed by the IP module.
– In the upstream direction, a user connects to the MA5616 using an E1 or G.SHDSLport. The E1 and G.SHDSL services are converged and sent to the serviceprocessing module. The E1 and G.SHDSL services can be transmitted upstreamusing the voice module or IP module. The difference is as follows: The voicemodule terminates the upstream voice service and forwards IP packets upstreamwhile the IP module converts E1 signals to IP signals and transparently transmitsthe data.
l The power module supplies power to other function modules of the board.l The clock module provides clock signals for each function module on the board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
154
Front Panel Port
8 channels of E1 (0-7)
8 channels of G.SHDSL (0-7)
Connected to the MDF
Connected to the MDF
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
155
IndicatorIndicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green Blinking quickly (onfor 0.25s and off for0.25s repeatedly)
The board is starting up andloading data.
Green Blinking slowly (on for1s and off for 1srepeatedly)
The board is runningproperly.
Red On The board is faulty.
Jumper SettingsThe H831EDTB board provides three jumpers, J13, J14, and J15, as shown in Figure 3-40.
Figure 3-40 Layout of the jumpers on the H831EDTB board
The functions of each jumper are as follows:
l J13 is used to report jumping status.l J14 and J15 are used to control shield layer grounding of an E1 port.
Table 3-60 describes the settings of J13, J14, and J15.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
156
Table 3-60 Jumper settings of the H831EDTB board
Jumper Setting Description FactoryDefault
J13 Connected When J14 and J15 are connected, J13must be connected, which reports theimpedance connection status.
Connected
Notconnected
When J14 and J15 are disconnected, J13must be disconnected, which reports theimpedance disconnection status.
J14 and J15 Connected The impedance on the E1 port is 75ohms.
Connected
Notconnected
The impedance on the E1 port is 120ohms.
NOTE
The values of 75 ohms and 120 ohms are based on the terminal matching impedance of an E1transmission line. Use an unbalanced cable (E1 coaxial cable) for the 75-ohm impedance and a balancedcable (differential symmetric pair) for the 120-ohm impedance.
Table 3-61 describes the mapping between J14, J15, and E1 ports.
Table 3-61 Mapping between J14, J15, and E1 ports
Jumper
Pin E1 Port Jumper
Pin E1 Port
J14 1-2 TX end of E1 port 8 J15 1-2 TX end of E1 port 1
3-4 RX end of E1 port 8 3-4 RX end of E1 port 1
5-6 TX end of E1 port 7 5-6 TX end of E1 port 2
7-8 RX end of E1 port 7 7-8 RX end of E1 port 2
9-10 TX end of E1 port 6 9-10 TX end of E1 port 3
11-12 RX end of E1 port 6 11-12 RX end of E1 port 3
13-14 TX end of E1 port 5 13-14 TX end of E1 port 4
15-16 RX end of E1 port 5 15-16 RX end of E1 port 4
Pin AssignmentsTable 3-62 describes the pin assignments of the G.SHDSL ports on the front panel of theH831EDTB board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
157
Table 3-62 Pin assignments of the G.SHDSL ports
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
1 None 17 None 33 1 49 None
2 18 34 50
3 None 19 None 35 2 51 None
4 20 36 52
5 None 21 None 37 3 53 None
6 22 38 54
7 None 23 None 39 4 55 None
8 24 40 56
9 None 25 None 41 5 57 None
10 26 42 58
11 None 27 None 43 6 59 None
12 28 44 60
13 None 29 None 45 7 61 None
14 30 46 62
15 None 31 None 47 8 63 None
16 32 48 64
Table 3-63 describes the pin assignments of the E1 ports on the front panel of the H831EDTBboard.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
158
Table 3-63 Pin assignments of the E1 ports
Pin Signal Port Pin Signal
1 GND 23 RT0P
2 GND 24 TT6P
3 GND 25 TT5P
4 GND 26 TT4P
5 GND 27 TT3P
6 GND 28 TT2P
7 TT7P 29 TT1P
8 TR7N 30 TT0P
9 TR6N 31 RR7N
10 TR5N 32 RR6N
11 TR4N 33 RR5N
12 TR3N 34 RR4N
13 TR2N 35 RR3N
14 TR1N 36 RR2N
15 TR0N 37 RR1N
16 RT7P 38 RR0N
17 RT6P 39 GND
18 RT5P 40 GND
19 RT4P 41 GND
20 RT3P 42 GND
21 RT2P 43 GND
22 RT1P 44 GND
Supported Software Version
V800R015C00 and later
3.11 Combo BoardThe combo board is a broadband and narrowband combo service board and provides threeapplication modes: combo mode, broadband mode, and narrowband mode. In combo mode,the combo board supports both broadband and voice services.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
159
3.11.1 Differences Between Combo Boards
Differences Between VDSL2 and POTS Combo Boards
Table 3-64 Voice specification differences between VDSL2 and POTS combo boards
Specifications
H83BCVLC orH83BCVLE
H836CCME H83DCCME H83DCSME
VDSL2 Specifications Comparison
Applicableline
VDSL2 andPOTS combo
VDSL2 andPOTS combo
VDSL2 andPOTS combo
SuperVector andPOTS Combo
Number ofports
32 48 48 48
Vectoring Not supported Not supported Supported Supported
G.INP Supported Supported Supported Supported
VDSL2PTMbonding
Supported (Supports the bonding of up to four ports on the same board. Andsupports 8-pair bonding when being connected to the MA5694.)
INM Supported Supported Supported Supported
SELT Supported Supported Supported Supported
Spectrumparameterprofile
Supports 8a, 8b,8c, 8d, 12a, 12b,and 17a
Supports 8a, 8b,8c, 8d, 12a, 12b,and 17a
Supports 8a, 8b,8c, 8d, 12a, 12b,and 17a
Supports 8a, 8b,8c, 8d, 12a, 12b,17a, and 35b
Annex type l G.992.1Annex A
l G.992.3Annex A, L,or M
l G.992.5Annex A orM
l G.993.2Annex A orB
l G.992.1Annex A
l G.992.3Annex A, L,or M
l G.992.5Annex A orM
l G.993.2Annex A orB
l G.992.1Annex A
l G.992.3Annex A, L,or M
l G.992.5Annex A orM
l G.993.2Annex A orB
l G.992.1Annex A
l G.992.3AnnexA/L/M
l G.992.5Annex A/M
l G.993.2Annex B
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
160
Specifications
H83BCVLC orH83BCVLE
H836CCME H83DCCME H83DCSME
Configuration mode
Supports TR129,TI, and TR165/TR252. (Userscan switch aconfigurationmode. To do so,log in to theMA5616 as asuper user andrun the switchvdsl mode tocommand indiagnose mode.)
Supports TR129 and TR165/TR252. (Users can switch aconfiguration mode. To do so, log in to the MA5616 asa super user and run the switch vdsl mode to commandin diagnose mode.)
Embeddedsplitter
Supported Supported Supported Supported
Temperaturequery andhigh-temperaturealarm
Supported Supported Supported Supported
Automaticpowershutdown inthe event ofa hightemperature
Supported Supported Supported Supported
Connector Champ 64-pin Champ 64-pin Champ 64-pin Champ 64-pin
POTS Specifications Comparison
Connector Champ 64-pin Champ 64-pin Champ 64-pin Champ 64-pin
Number ofDSPchannels (G.711)
32 48 48 48
Codec G.711AG.711UG.729G.723.1G.726
POTSMELT
Supported Supported Supported Supported
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
161
Specifications
H83BCVLC orH83BCVLE
H836CCME H83DCCME H83DCSME
MELTprecision
High High High High
Automaticpowershutdown inthe event ofa hightemperature
Supported Supported Supported Supported
Short loop Supported Supported Supported Supported
Polarity ofwires a andb
a+b-
a+b-
a+b-
a+b-
16/12 KC Not supported Not supported Not supported Not supported
Poweringon/off usingthe CLI
Supported Supported Supported Supported
Polarityreversal
Supported Supported Supported Supported
Powersupply at ahigh voltage(for a longdistance)
Not supported Not supported Not supported Not supported
Port current 20 mA, 25 mA,or 30 mA
20 mA, 25 mA,or 30 mA
20 mA, 25 mA,or 30 mA
20 mA, 25 mA,or 30 mA
ADSL2+ and POTS Combo Board Specifications
Table 3-65 ADSL2+ and POTS combo board specifications
Specifications H835CALE H836CALE
ADSL2+ Specifications
Applicable line ADSL2+ and POTS combo ADSL2+ and POTS combo
Number of ports 32 32
G.INP Supported Not supported
ADSL2+ bonding Not supported Not supported
INM Supported Not supported
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
162
Specifications H835CALE H836CALE
SELT Supported Supported
MELT Not supported Not supported
Annex type l G.992.1 Annex Al G.992.3 Annex A, L, or M
(EU32-EU64)l G.992.5 Annex A or M
(EU32-EU64)
l G.992.1 Annex Al G.992.3 Annex A, L, or M
(EU32-EU64)l G.992.5 Annex A or M
(EU32-EU64)
Configuration mode Supports RFC 2662, RFC4706, and TR165/TR252.(Users can switch aconfiguration mode. To do so,log in to the MA5616 as asuper user and run the switchadsl mode to command indiagnose mode.)
Supports RFC 2662, RFC4706, and TR165/TR252.(Users can switch aconfiguration mode. To do so,log in to the MA5616 as asuper user and run the switchadsl mode to command indiagnose mode.)
Connector Champ 64-pin Champ 64-pin
Embedded splitter Supported Supported
Temperature query andhigh-temperature alarm
Supported Supported
Automatic powershutdown in the eventof a high temperature
Supported Supported
POTS Specifications
Connector Champ 64-pin Champ 64-pin
Number of DSPchannels (G.711)
32 32
Codec G.711AG.711UG.729G.723.1G.726
POTS MELT Supported Supported
MELT precision High High
Automatic powershutdown in the eventof a high temperature
Supported Supported
Short loop Supported Supported
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
163
Specifications H835CALE H836CALE
Polarity of wires a andb
a+b-
a+b-
16/12 KC Not supported Supported
Powering on/off usingthe CLI
Supported Supported
Polarity reversal Supported Supported
Power supply at a highvoltage (for a longdistance)
Not supported Not supported
Port current 20 mA, 25 mA, or 30 mA 20 mA, 25 mA, or 30 mA
3.11.2 H835CALE Board DescriptionH835CALE is a 32-channel ADSL2+ and POTS combo service board that provides ADSL2+and POTS integrated access services. It has an embedded splitter with 600-ohm impedance.
Functions and SpecificationsFor details, see Differences Between Combo Boards.
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-41 shows the working principles of the H835CALE board.
Figure 3-41 Working principles of the H835CALE board
Bac
kpla
ne c
onne
ctor
Narrowband interface module
Spl
itter
m
odul
e
Power module
Logic processing
module
Clock module
LINE
-48V, +3.3V
Narrowband service control
module
Codec module
Pro
tect
ion
mod
ule
Broadband interface module
ATU-R/PSTN
terminal32*(POTS + ADSL2+)
H835CALEBackplane User sideBackplane port bus
Control board
DC power
+72V, -24V
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
164
The H835CALE board can be divided into two parts: the broadband part and the narrowbandpart. The basic working principles of the board are as follows:
l Narrowband service processing:– The codec module encodes and decodes voice signals and converts analog signals
to digital signals. It also provides an uplink port connecting to the HW bus of thebackplane.
– The narrowband interface module provides access to 32-channel narrowbandservices.
– The narrowband service control module controls and manages narrowband services.l Broadband service processing:
– The logic processing module implements functions, such as encoding/decoding,A/D conversion, and line driving for ADSL2+ services. It also provides an uplinkport connecting to the UTOPIA bus of the backplane.
– The broadband interface module converts ADSL2+ line signals to cell flows.l The protection module protects and isolates the board from lightning strikes.l The splitter module couples broadband and narrowband subscriber lines and separates
POTS signals from ADSL2+ signals.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
165
Front Panel Port
32 channels of ADSL2+ and POTS
(0-31)Connected to the MDF
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
166
Indicator
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On Board startup phase: the boardhas been powered on and isbeing initialized.Board running phase: the boardis running properly.
Red On Board startup phase: the board isautomatically loading data and isbeing automatically discovered.Board running phase: the boardis faulty.
Pin Assignments
Table 3-66 describes the pin assignments of the LINE ports on the front panel of theH835CALE board.
Table 3-66 Pin assignments of the LINE port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 24
63 47 31 15
62 14 46 6 30 17 14 25
61 45 29 13
60 13 44 5 28 18 12 26
59 43 27 11
58 12 42 4 26 19 10 27
57 41 25 9
56 11 40 3 24 20 8 28
55 39 23 7
54 10 38 2 22 21 6 29
53 37 21 5
52 9 36 1 20 22 4 30
51 35 19 3
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
167
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
50 8 34 0 18 23 2 31
49 33 17 1
Jumper Settings
The H835CALE board provides two jumpers, J7 and J8, as shown in Figure 3-42.
Figure 3-42 Layout of the jumpers on the H835CALE board
Table 3-67 describes the settings of J7 and J8.
Table 3-67 Jumper settings of the H835CALE board
Jumper Setting Indication Factory Default
J7 and J8 Connected The narrowband CPU of the boardworks in serial port loading mode.
Not connected
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
168
Jumper Setting Indication Factory Default
Notconnected
The board is ready for proper working.
Supported Software Version
All versions
3.11.3 H836CALE Board DescriptionH836CALE is a 32-channel ADSL2+ and POTS combo service board that provides ADSL2+and POTS integrated access services. It has an embedded splitter.
Functions and Specifications
For details, see Differences Between Combo Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-43 shows the working principles of the H836CALE board.
Figure 3-43 Working principles of the H836CALE board
The H836CALE board can be divided into two parts: the broadband part and the narrowbandpart. The basic working principles of the board are as follows:
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
169
l Narrowband service processing:– The codec module encodes and decodes voice signals and converts analog signals
to digital signals. It also provides an uplink port connecting to the HW bus of thebackplane.
– The narrowband interface module provides access to 32-channel narrowbandservices.
– The narrowband service control module controls and manages narrowband services.l Broadband service processing:
– The logic processing module implements functions, such as encoding/decoding,A/D conversion, and line driving for ADSL2+ services. It also provides an uplinkport connecting to the UTOPIA bus of the backplane.
– The broadband interface module converts ADSL2+ line signals to cell flows.l The protection module protects and isolates the board from lightning strikes.l The splitter module couples broadband and narrowband subscriber lines and separates
POTS signals from ADSL2+ signals.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
170
Front Panel Port
32 channels of ADSL2+ and POTS
(0-31)Connected to the MDF
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
171
Indicator
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On Board startup phase: the boardhas been powered on and isbeing initialized.Board running phase: the boardis running properly.
Red On Board startup phase: the board isautomatically loading data and isbeing automatically discovered.Board running phase: the boardis faulty.
Pin Assignments
Table 3-68 describes the pin assignments of the LINE ports on the front panel of theH836CALE board.
Table 3-68 Pin assignments of the LINE port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 24
63 47 31 15
62 14 46 6 30 17 14 25
61 45 29 13
60 13 44 5 28 18 12 26
59 43 27 11
58 12 42 4 26 19 10 27
57 41 25 9
56 11 40 3 24 20 8 28
55 39 23 7
54 10 38 2 22 21 6 29
53 37 21 5
52 9 36 1 20 22 4 30
51 35 19 3
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
172
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
50 8 34 0 18 23 2 31
49 33 17 1
Jumper Settings
The H836CALE board provides two jumpers, J7 and J16, as shown in Figure 3-44.
Figure 3-44 Layout of the jumpers on the H836CALE board
Table 3-69 describes settings of J7 and J16.
Table 3-69 Jumper settings of the H836CALE board
Jumper Setting Indication Factory Default
J7 and J16 Connected The narrowband CPU of the boardworks in serial port loading mode.
Not connected
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
173
Jumper Setting Indication Factory Default
Notconnected
The board is ready for proper working.
Supported Software Version
l V800R016C10SPH205 and patches later than the version having the same R version asV800R016C10SPH205
l V800R017C00 and later
3.11.4 H83BCVLC and H83BCVLE Board DescriptionH83BCVLC and H83BCVLE are 32-channel VDSL2 and POTS combo service boards thatprovide VDSL2 and POTS integrated access services. They have an embedded splitter.
Functions and SpecificationsFor details, see Differences Between Combo Boards.
NOTE
The functions of the H83BCVLC and H83BCVLE boards are the same. They only differ in groundingmode. The H83BCVLC board uses the DC-C grounding mode while the H83BCVLE board uses theDC-I grounding mode. This section uses the H83BCVLC board as an example.
DC-C and DC-I grounding modes are as follows:
l In DC-C grounding mode, GND, PGND, and BGND are connected.
l In DC-I grounding mode, BGND (grounding of the 48 V DC return current) is separated fromPGND (grounding of the device shell) and GND (grounding of the device interior) while PGNDand GND are connected.
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-45 shows the working principles of the H83BCVLC board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
174
Figure 3-45 Working principles of the H83BCVLC board
Bac
kpla
ne c
onne
ctor
Narrowband interface module
Splitter module
Power module
Broaddand service module
LINE
–48 V, +3.3 V
Control module
Narrowband service control
module
Pro
tect
ion
mod
ule
Broadband interface module
32 x (POTS+VDSL2)
H83BCVLC/H83BCVLEBackplane User side
Control board
Backplane port bus
VTU-R and PSTN terminals
DC power
Clock module
+72 V, –24 V
The H83BCVLC board can be divided into two parts: the broadband part and the narrowbandpart. The basic working principles of the board are as follows:
l Narrowband service processing:– The narrowband service control module encodes and decodes voice signals and
converts analog signals into digital signals.– The narrowband interface module provides access to 32-channel narrowband
services.l Broadband service processing:
– The control module enables the control board to manage and configure broadbandservices.
– The broadband service module implements functions, such as encoding/decoding,A/D conversion, and line driving for VDSL2 services.
– The broadband interface module converts VDSL2 line signals to cell flows.l The protection module protects and isolates the board from lightning strikes.l The splitter module couples broadband and narrowband subscriber lines and separates
POTS signals from VDSL2 signals.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
175
Front Panel Port
32 channels of VDSL2 and POTS
(0-31)Connected to the MDF
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
176
Indicator
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On Board startup phase: the boardhas been powered on and isbeing initialized.Board running phase: the boardis running properly.
Red On Board startup phase: the board isautomatically loading data and isbeing automatically discovered.Board running phase: the boardis faulty.
Pin Assignments
Table 3-70 describes the pin assignments of the LINE ports on the front panel of theH83BCVLC board.
Table 3-70 Pin assignments of the LINE port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 24
63 47 31 15
62 14 46 6 30 17 14 25
61 45 29 13
60 13 44 5 28 18 12 26
59 43 27 11
58 12 42 4 26 19 10 27
57 41 25 9
56 11 40 3 24 20 8 28
55 39 23 7
54 10 38 2 22 21 6 29
53 37 21 5
52 9 36 1 20 22 4 30
51 35 19 3
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
177
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
50 8 34 0 18 23 2 31
49 33 17 1
Jumper Settings
The H83BCVLC board provides two jumpers, J14 and J15, as shown in Figure 3-46.
Figure 3-46 Layout of the jumpers on the H83BCVLC board
Table 3-71 describes the settings of J14 and J15.
Table 3-71 Jumper settings of the H83BCVLC board
Jumper Setting Indication Factory Default
J14 and J15 Connected The narrowband CPU of the boardworks in serial port loading mode.
Not connected
Notconnected
The board is ready for proper working.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
178
Supported Software VersionBoard Supported Software Version
H83BCVLC V800R311C01 and later
H83BCVLE V800R311C00 and later
3.11.5 H836CCME Board DescriptionH836CCME is a 48-channel VDSL2 and POTS combo service board that provides VDSL2and POTS integrated access services. It has an embedded splitter.
Functions and SpecificationsFor details, see Differences Between Combo Boards.
NOTE
The H836CCME board uses the DC-C but not DC-I grounding mode.DC-C and DC-I grounding modes are as follows:l In DC-C grounding mode, GND, PGND, and BGND are connected.l In DC-I grounding mode, BGND (grounding of the 48 V DC return current) is separated from
PGND (grounding of the device shell) and GND (grounding of the device interior) while PGNDand GND are connected.
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-47 shows the working principles of the H836CCME board.
Figure 3-47 Working principles of the H836CCME board
Bac
kpla
ne c
onne
ctor
Narrowband interface module
Splitter module
Power module
Broaddand service module
LINE
–48 V, +3.3 V
Control module
Narrowband service control
module
Pro
tect
ion
mod
ule
Broadband interface module
48 x (POTS+VDSL2)
H836CCMEBackplane User side
Control board
Backplane port bus
VTU-R and PSTN terminals
DC power
Clock module
+72 V, –24 V
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
179
The H836CCME board can be divided into two parts: the broadband part and the narrowbandpart. The basic working principles of the board are as follows:
l Narrowband service processing:– The narrowband service control module encodes and decodes voice signals and
converts analog signals into digital signals.– The narrowband interface module provides access to 48-channel narrowband
services.l Broadband service processing:
– The control module enables the control board to manage and configure broadbandservices.
– The broadband service module implements functions, such as encoding/decoding,A/D conversion, and line driving for VDSL2 services.
– The broadband interface module converts VDSL2 line signals to cell flows.l The protection module protects and isolates the board from lightning strikes.l The splitter module couples broadband and narrowband subscriber lines and separates
POTS signals from VDSL2 signals.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
180
Front Panel Port
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
181
Indicator
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On Board startup phase: the boardhas been powered on and isbeing initialized.Board running phase: the boardis running properly.
Red On Board startup phase: the board isautomatically loading data and isbeing automatically discovered.Board running phase: the boardis faulty.
Pin Assignments
Table 3-72 and Table 3-73 describe pin assignments of the LINE0 and LINE1 ports on thefront panel of the H836CCME board, respectively.
Table 3-72 Pin assignments of the LINE0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 -
63 47 31 15
62 14 46 6 30 17 14 -
61 45 29 13
60 13 44 5 28 18 12 -
59 43 27 11
58 12 42 4 26 19 10 -
57 41 25 9
56 11 40 3 24 20 8 -
55 39 23 7
54 10 38 2 22 21 6 -
53 37 21 5
52 9 36 1 20 22 4 -
51 35 19 3
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
182
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
50 8 34 0 18 23 2 -
49 33 17 1
Table 3-73 Pin assignments of the LINE1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 39 48 31 32 40 16 -
63 47 31 15
62 38 46 30 30 41 14 -
61 45 29 13
60 37 44 29 28 42 12 -
59 43 27 11
58 36 42 28 26 43 10 -
57 41 25 9
56 35 40 27 24 44 8 -
55 39 23 7
54 34 38 26 22 45 6 -
53 37 21 5
52 33 36 25 20 46 4 -
51 35 19 3
50 32 34 24 18 47 2 -
49 33 17 1
Jumper SettingsThe H836CCME board provides two jumpers, J13 and J24, as shown in Figure 3-48.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
183
Figure 3-48 Layout of the jumpers on the H836CCME board
Table 3-74 Settings of J13 and J24
Jumper Setting Description Factory Default
J13 and J24 Connected The narrowband CPU of the boardworks in serial port loading mode.
Not connected
Notconnected
The board is ready for proper working.
Supported Software Version
l V800R016C10SPH205 and patches later than the version having the same R version asV800R016C10SPH205
l V800R015C10 and later
3.11.6 H83DCCME Board DescriptionH83DCCME is a 48-channel VDSL2 and POTS combo service board that provides VDSL2and POTS integrated access services. It has an embedded splitter. It supports vectoring.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
184
Functions and SpecificationsFor details, see Differences Between Combo Boards.
NOTE
The H83DCCME board uses the DC-C but not DC-I grounding mode.DC-C and DC-I grounding modes are as follows:l In DC-C grounding mode, GND, PGND, and BGND are connected.l In DC-I grounding mode, BGND (grounding of the 48 V DC return current) is separated from
PGND (grounding of the device shell) and GND (grounding of the device interior) while PGNDand GND are connected.
Power ConsumptionFor details, see Board Power Consumption.
Working PrinciplesFigure 3-49 shows the working principles of the H83DCCME board.
Figure 3-49 Working principles of the H83DCCME board
Bac
kpla
ne c
onne
ctor
Narrowband interface module
Splitter module
Power module
Broadband service module
LINE
–48 V, +3.3 V
Control module
Narrowband service control
moduleP
rote
ctio
n m
odul
e
Broadband interface module
48 x (POTS+VDSL2)
H83DCCMEBackplane User side
Control board
Backplane port bus
ATU-R and PSTN terminal
DC power
Clock module
+72 V, –24 V
The H83DCCME board can be divided into two parts: the broadband part and the narrowbandpart. The basic working principles of the board are as follows:
l Narrowband service processing:– The narrowband service control module encodes and decodes voice signals and
converts analog signals into digital signals.– The narrowband interface module provides access to 48-channel narrowband
services.l Broadband service processing:
– The control module enables the control board to manage and configure broadbandservices.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
185
– The broadband service module implements functions, such as encoding/decoding,A/D conversion, and line driving for VDSL2 services.
– The broadband interface module converts VDSL2 line signals to cell flows.l The protection module protects and isolates the board from lightning strikes.l The splitter module couples broadband and narrowband subscriber lines and separates
POTS signals from VDSL2 signals.
Front Panel Port
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
186
Indicator
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On Board startup phase: the boardhas been powered on and isbeing initialized.Board running phase: the boardis running properly.
Red On Board startup phase: the board isautomatically loading data and isbeing automatically discovered.Board running phase: the boardis faulty.
Pin Assignments
Table 3-75 and Table 3-76 describe pin assignments of the LINE ports on the front panel ofthe H83DCCME board.
Table 3-75 Pin assignments of the LINE0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 -
63 47 31 15
62 14 46 6 30 17 14 -
61 45 29 13
60 13 44 5 28 18 12 -
59 43 27 11
58 12 42 4 26 19 10 -
57 41 25 9
56 11 40 3 24 20 8 -
55 39 23 7
54 10 38 2 22 21 6 -
53 37 21 5
52 9 36 1 20 22 4 -
51 35 19 3
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
187
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
50 8 34 0 18 23 2 -
49 33 17 1
Table 3-76 Pin assignments of the LINE1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 39 48 31 32 40 16 -
63 47 31 15
62 38 46 30 30 41 14 -
61 45 29 13
60 37 44 29 28 42 12 -
59 43 27 11
58 36 42 28 26 43 10 -
57 41 25 9
56 35 40 27 24 44 8 -
55 39 23 7
54 34 38 26 22 45 6 -
53 37 21 5
52 33 36 25 20 46 4 -
51 35 19 3
50 32 34 24 18 47 2 -
49 33 17 1
Jumper SettingsThe H83DCCME board provides two jumpers, J13 and J24, as shown in Figure 3-50.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
188
Figure 3-50 Layout of the jumpers on the H83DCCME board
Table 3-77 describes settings of J13 and J24.
Table 3-77 Settings of J13 and J24
Jumper Setting Description Factory Default
J13 and J24 Connected The narrowband CPU of the boardworks in serial port loading mode.
Not connected
Notconnected
The board is ready for proper working.
Supported Software Version
V800R016C00 and later
3.11.7 H83DCSME Board DescriptionH83DCSME is a 48-channel SuperVector and POTS combo service board that provides theSuperVector and POTS integrated access service. It has an embedded splitter. It supportsSuperVector and metallic line testing (MELT).
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
189
Functions and Specifications
For details, see Differences Between Combo Boards.
Power Consumption
For details, see Board Power Consumption.
Working Principles
Figure 3-51 shows the working principles of the H83DCSME board.
Figure 3-51 Working principles of the H83DCSME board
The basic working principles of the H83DCSME board are as follows:
l Narrowband service processing:– The narrowband service control module encodes and decodes voice signals and
converts analog signals into digital signals.– The narrowband interface module provides access to 48-channel narrowband
services.
l Broadband service processing:– The control module enables the control board to manage and configure broadband
services.– The broadband service module implements functions, such as encoding/decoding,
A/D conversion, and line driving for SuperVector services.– The broadband interface module converts SuperVector line signals to cell flows.
l The protection module protects and isolates the board from lightning strikes.
l The splitter module couples broadband and narrowband subscriber lines and separatesPOTS signals from SuperVector signals.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
190
Front Panel Port
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
191
Indicator
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On Board startup phase: the boardhas been powered on and isbeing initialized.Board running phase: the boardis running properly.
Red On Board startup phase: the board isautomatically loading data and isbeing automatically discovered.Board running phase: the boardis faulty.
Pin Assignments
Table 3-78 and Table 3-79 describe pin assignments of the LINE0 and LINE1 ports on thefront panel of the H83DCSME board, respectively.
Table 3-78 Pin assignments of the LINE0 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 15 48 7 32 16 16 -
63 47 31 15
62 14 46 6 30 17 14 -
61 45 29 13
60 13 44 5 28 18 12 -
59 43 27 11
58 12 42 4 26 19 10 -
57 41 25 9
56 11 40 3 24 20 8 -
55 39 23 7
54 10 38 2 22 21 6 -
53 37 21 5
52 9 36 1 20 22 4 -
51 35 19 3
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
192
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
50 8 34 0 18 23 2 -
49 33 17 1
Table 3-79 Pin assignments of the LINE1 port
Pin Signal
Pin Signal
Port Pin Signal
Pin Signal
64 39 48 31 32 40 16 -
63 47 31 15
62 38 46 30 30 41 14 -
61 45 29 13
60 37 44 29 28 42 12 -
59 43 27 11
58 36 42 28 26 43 10 -
57 41 25 9
56 35 40 27 24 44 8 -
55 39 23 7
54 34 38 26 22 45 6 -
53 37 21 5
52 33 36 25 20 46 4 -
51 35 19 3
50 32 34 24 18 47 2 -
49 33 17 1
Jumper SettingsThe H83DCSME board provides two jumpers, J13 and J24, as shown in Figure 3-52.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
193
Figure 3-52 Layout of the jumpers on the H83DCSME board
Table 3-80 Settings of J13 and J24
Jumper Setting Description Factory Default
J13 and J24 Connected The narrowband CPU of the boardworks in serial port loading mode.
Not connected
Notconnected
The board is ready for proper working.
Supported Software Version
V800R018C00 and later
3.12 Power BoardConnected to the external AC or DC power supply, the power board converts the voltage ofsuch power supply into a proper voltage using its power module and powers other boards inthe chassis.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
194
3.12.1 Differences Between Power BoardsPower boards supported by the MA5616 include AC power boards and DC power boards.
All DC power boards support the following functions:
l Input power filtering and current limitation
l Alarm reporting for input power detection
Table 3-81 and Table 3-82 list the differences between power boards.
Table 3-81 Differences between DC power boards
PowerBoard
Power SupplyMode
Maximum OutputPower (Unit: W)
PowerBackup
Daughterboard
H831PDIA One -48 V DC input 200 Notsupported
Notsupported
H832PDIA Two -48 V DC inputs 300 Notsupported
Notsupported
H832PDVA
One -48 V DC input 400 Notsupported
Notsupported
H832PDVAA
One -48 V DC input 400 Notsupported
Supported(using theH836VPBAdaughterboard)
H832PDNAA
One -48 V DC input 400 Notsupported
Supported(using theH836VPDAdaughterboard)
H832PDVSA
One -48 V DC input 500 Notsupported
Supported(using theH836VPSHD daughterboard)
H832PDVSB
One -48 V DC input 500 Notsupported
Supported(using theH836VPSKD daughterboard)
H832PDMSB
One -48 V DC input 500 Notsupported
Supported(using theH836VPMEdaughterboard)
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
195
Table 3-82 Differences between AC power boards
PowerBoard
Power SupplyMode
Maximum OutputPower (Unit: W)
PowerBackup
Daughterboard
H831PAVDA
One 220 V AC or 110V input
400 Supported,one battery(lead-acidbattery orFe-lithiumbattery)input forpowerbackup
Supported(using theH836VPBAdaughterboard)
H831PAIA One 220 V AC or 110V input
200 Notsupported
Notsupported
H831PAIC One 220 V AC or 110V input
400 Notsupported
Notsupported
H831PAIB One 220 V AC or 110V input
200 Supported,one battery(lead-acidbattery orFe-lithiumbattery)input forpowerbackup
Notsupported
3.12.2 H831PDIA Board DescriptionH831PDIA is a DC power board. It supplies one channel of -48 V DC power to thebackplane, or converts -48 V DC power to +3.3 V DC and +12 V DC and then supplies powerto service boards, control board, and fan monitoring board using the backplane.
Functions and SpecificationsFor details, see Differences Between Power Boards.
Working PrinciplesFigure 3-53 shows the working principles of the H831PDIA board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
196
Figure 3-53 Working principles of the H831PDIA board
Protection filter circuit
Soft-start circuit
Detection alarm circuit
Electronic lable and board type reporting circuit
Power module for converting –48 V
to +12 V
Power module for converting –48 V
to +3.3 V
Output filter circuit
–48 V DC–48 V DC
+12 V DC
+3.3 V DC
Alarm information
SPI bus and board type
Output filter circuit
DC power
H831PDIA
Service boardsAnd control board
Backplane
Fan monitoring board
Service boards
The basic working principles of the H831PDIA board are as follows:
l The protection and filter circuit protects the -48 V DC power input against surges andlightning strikes for current limiting and also filters EMI for the -48 V DC power input.
l The soft-start circuit provides the soft-start function for the -48 V DC power input of the+12 V DC and +3.3 V DC power modules.
l The output filter circuit filters the output of the +12 V DC and +3.3 V DC powermodules.
l The detection and alarm circuit detects the availability of the -48 V DC power andreports related alarms.
l The electronic label and board type reporting circuit stores the board manufacturinginformation and reports the board type.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
197
Front Panel Port
Connected to the device providing DC power supply
DC power port
IndicatorIndicator
Name Color Status Meaning
PWR Runningstatusindicator
Green On The board is functioningproperly.
Green Off or Blinking The board is powered off orthe input fuse blows.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
198
Indicator
Name Color Status Meaning
SPD Protectionindicator
Green On The board protection circuitis normal.
Green Off or Blinking The board protection circuitis faulty.
Supported Software Version
All versions
3.12.3 H832PDIA Board DescriptionH832PDIA is a DC power board. It supplies two channels of -48 V DC power to thebackplane, or converts -48 V DC power to +3.3 V DC and +12 V DC and then supplies powerto service boards, control board, and fan monitoring board using the backplane.
Functions and Specifications
For details, see Differences Between Power Boards.
Working Principles
Figure 3-54 shows the working principles of the H832PDIA board.
Figure 3-54 Working principles of the H832PDIA board
The basic working principles of the H832PDIA board are as follows:
l The protection and filter circuit protects the -48 V DC power input against surges andlightning strikes for current limiting and also filters EMI for the -48 V DC power input.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
199
l The soft-start circuit provides the soft-start function for the -48 V DC power input of the+12 V DC and +3.3 V DC power modules.
l The output filter circuit filters the output of the +12 V DC and +3.3 V DC powermodules.
l The detection and alarm circuit detects the availability of the -48 V DC power andreports related alarms.
l The electronic label and board type reporting circuit stores the board manufacturinginformation and reports the board type.
Front Panel Port
Indicator
Indicator
Name Color Status Meaning
PWR0 Powerstatusindicator(DC
Green On The circuit of DC input"0" is functional.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
200
Indicator
Name Color Status Meaning
input"0")
Green Off DC input 0 is notavailable or the circuitof DC input "0" isfaulty.
PWR1 Powerstatusindicator(DCinput"1")
Green On The circuit of DC input"1" is functional.
Green Off DC input 1 is notavailable or the circuitof DC input "1" isfaulty.
SPD Protectionindicator
Green On A link has been set upon the port, and data isbeing transmitted.
Green Off A link has been set upon the port, but no datais being transmitted.
Supported Software VersionAll versions
3.12.4 H832PDVA Board DescriptionH832PDVA is a DC power board. It supplies one channel of -48 V DC power to thebackplane, or converts -48 V DC power to +3.3 V DC and +12 V DC and then supplies powerto service boards, control board, and fan monitoring board using the backplane.
Functions and SpecificationsFor details, see Differences Between Power Boards.
Working PrinciplesFigure 3-55 shows the working principles of the H832PDVA board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
201
Figure 3-55 Working principles of the H832PDVA board
The basic working principles of the H832PDVA board are as follows:
l The protection and filter circuit protects the -48 V DC power input against surges andlightning strikes for current limiting and also filters EMI for the -48 V DC power input.
l The soft-start circuit provides the soft-start function for the -48 V DC power input of the+12 V DC and +3.3 V DC power modules.
l The output filter circuit filters the output of the +12 V DC and +3.3 V DC powermodules.
l The detection and alarm circuit detects the availability of the -48 V DC power andreports related alarms.
l The electronic label and board type reporting circuit stores the board manufacturinginformation and reports the board type.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
202
Front Panel Port
Indicator
Indicator
Name Color Status Meaning
PWR Runningstatusindicator
Green On The board is functioningproperly.
Green Off or Blinking The board is powered off orthe input fuse blows.
SPD Protectionindicator
Green On The board protection circuitis normal.
Green Off or Blinking The board protection circuitis faulty.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
203
Supported Software Version
V800R311C00 and later
3.12.5 H832PDVAA Board DescriptionH832PDVAA is a DC power board. It supplies one channel of -48 V DC power to thebackplane, or converts -48 V DC power to +3.3 V DC and +12 V DC and then supplies powerto service boards, control board, and fan monitoring board using the backplane.
Functions and Specifications
For details, see Differences Between Power Boards.
Power Consumption of the H836VPBA Daughter Board
For details, see Board Power Consumption.
Working Principles
Figure 3-56 shows the working principles of the H832PDVAA board.
Figure 3-56 Working principles of the H832PDVAA board
The basic working principles of the H832PDVAA board are as follows:
l The protection and filter circuit protects the -48 V DC power input against surges andlightning strikes for current limiting and also filters EMI for the -48 V DC power input.
l The soft-start circuit provides the soft-start function for the -48 V DC power input of the+12 V DC and +3.3 V DC power modules.
l The output filter circuit filters the output of the +12 V DC and +3.3 V DC powermodules.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
204
l The detection and alarm circuit detects the availability of the -48 V DC power andreports related alarms.
l The electronic label and board type reporting circuit stores the board manufacturinginformation and reports the board type.
l The H836VPBA daughter board implements the vectoring function for calculating andcanceling the crosstalk on lines.
Front Panel Port
IndicatorIndicator
Name Color Status Meaning
PWR Runningstatusindicator
Green On The board is functioningproperly.
Green Off or Blinking The board is powered off orthe input fuse blows.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
205
Indicator
Name Color Status Meaning
SPD Protectionindicator
Green On The board protection circuitis normal.
Green Off or Blinking The board protection circuitis faulty.
Supported Software VersionV800R311C01 and later
3.12.6 H832PDMSB Board DescriptionH832PDMSB is a DC power board. It supplies one channel of -48 V DC power to thebackplane, or converts -48 V DC power to +3.3 V DC and +12 V DC and then supplies powerto service boards, control board, and fan monitoring board using the backplane.
Functions and SpecificationsFor details, see Differences Between Power Boards.
Power Consumption of BoardFor details, see Board Power Consumption.
Working PrinciplesFigure 3-57 shows the working principles of the H832PDMSB board.
Figure 3-57 Working principles of the H832PDMSB board
The basic working principles of the H832PDMSB board are as follows:
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
206
l The protection and filter circuit protects the -48 V DC power input against surges andlightning strikes for current limiting and also filters EMI for the -48 V DC power input.
l The soft-start circuit provides the soft-start function for the -48 V DC power input of the+12 V DC and +3.3 V DC power modules.
l The output filter circuit filters the output of the +12 V DC and +3.3 V DC powermodules.
l The detection and alarm circuit detects the availability of the -48 V DC power andreports related alarms.
l The electronic label and board type reporting circuit stores the board manufacturinginformation and reports the board type.
l The H836VPME daughter board is attached on the power board for processing vectoringsignals. It is used for calculation and cancellation for crosstalk over lines and provides a10 GKR port for a service board connection.
Front Panel Port
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
207
IndicatorIndicator
Name Color Status Meaning
PWR Runningstatusindicator
Green On The board is functioningproperly.
Green Off or Blinking The board is powered off orthe input fuse blows.
SPD Protectionindicator
Green On The board protection circuitis normal.
Green Off or Blinking The board protection circuitis faulty.
Supported Software VersionV800R019C00 and later
3.12.7 H832PDNAA Board DescriptionH832PDNAA is a 400 W DC power board. It supplies one channel of -48 V DC power to thebackplane, or converts -48 V DC power to +3.3 V DC and +12 V DC and then supplies powerto service boards, control board, and fan monitoring board using the backplane.
Functions and SpecificationsFor details, see Differences Between Power Boards.
Power Consumption of the H836VPDA Daughter BoardFor details, see Board Power Consumption.
Working PrinciplesFigure 3-58 shows the working principles of the H832PDNAA board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
208
Figure 3-58 Working principles of the H832PDNAA board
The basic working principles of the H832PDNAA board are as follows:
l The protection and filter circuit protects the -48 V DC power input against surges andlightning strikes for current limiting and also filters EMI for the -48 V DC power input.
l The soft-start circuit provides the soft-start function for the -48 V DC power input of the+12 V DC and +3.3 V DC power modules.
l The output filter circuit filters the output of the +12 V DC and +3.3 V DC powermodules.
l The detection and alarm circuit detects the availability of the -48 V DC power andreports related alarms.
l The electronic label and board type reporting circuit stores the board manufacturinginformation and reports the board type.
l The H836VPDA daughter board implements the vectoring function for calculating andcanceling the crosstalk on narrowband lines.
NOTE
If you are not sure whether the environment where the device locates meets device requirements,disable energy conservation on the H836VPDA daughter board, which minimizes daughter boardcorrosion risks.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
209
Front Panel Port
NOTE
The VEI port is used for transmitting vectoring service signals between two MA5616s, cancelingcrosstalk on VDSL2 lines connected between the two MA5616s. In addition, this port can be used fortransmitting management signals between two MA5616s.
Indicator
Indicator
Name Color Status Meaning
PWR Runningstatusindicator
Green On The board is functioningproperly.
Green Off or Blinking The board is poweredoff or the input fuseblows.
SPD Protectionindicator
Green On The board protectioncircuit is normal.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
210
Indicator
Name Color Status Meaning
Green Off or Blinking The board protectioncircuit is faulty.
LINK Linkindicatorof theVEI port
Green On The link connected tothe VEI port isfunctional.
Green Off No link is connected tothe VEI port.
Supported Software Version
V800R313C10 and later
3.12.8 H832PDVSA Board DescriptionH832PDVSA is a DC power board. It supplies one channel of -48 V DC power to thebackplane, or converts -48 V DC power to +3.3 V DC and +12 V DC and then supplies powerto service boards, control board, and fan monitoring board using the backplane.
Functions and Specifications
For details, see Differences Between Power Boards.
Power Consumption of the H836VPSHD Daughter Board
For details, see Board Power Consumption.
Working Principles
Figure 3-59 shows the working principles of the H832PDVSA board.
Figure 3-59 Working principles of the H832PDVSA board
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
211
The basic working principles of the H832PDVSA board are as follows:
l The protection and filter circuit protects the -48 V DC power input against surges andlightning strikes for current limiting and also filters EMI for the -48 V DC power input.
l The soft-start circuit provides the soft-start function for the -48 V DC power input of the+12 V DC and +3.3 V DC power modules.
l The output filter circuit filters the output of the +12 V DC and +3.3 V DC powermodules.
l The detection and alarm circuit detects the availability of the -48 V DC power andreports related alarms.
l The electronic label and board type reporting circuit stores the board manufacturinginformation and reports the board type.
l The H836VPSHD daughter board is attached on the power board for processingvectoring signals. It is used for calculation and cancellation for crosstalk over lines andprovides a 10 GKR port for a service board connection.
Front Panel Port
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
212
IndicatorIndicator
Name Color Status Meaning
PWR Runningstatusindicator
Green On The board is functioningproperly.
Green Off or Blinking The board is powered off orthe input fuse blows.
SPD Protectionindicator
Green On The board protection circuitis normal.
Green Off or Blinking The board protection circuitis faulty.
Supported Software VersionV800R017C00 and later
3.12.9 H832PDVSB Board DescriptionH832PDVSB is a DC power board. It supplies one channel of -48 V DC power to thebackplane, or converts -48 V DC power to +3.3 V DC and +12 V DC and then supplies powerto service boards, control board, and fan monitoring board using the backplane.
Functions and SpecificationsFor details, see Differences Between Power Boards.
Power Consumption of the H836VPSKD Daughter BoardFor details, see Board Power Consumption.
Working PrinciplesFigure 3-60 shows the working principles of the H832PDVSB board.
Figure 3-60 Working principles of the H832PDVSB board
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
213
The basic working principles of the H832PDVSB board are as follows:
l The protection and filter circuit protects the -48 V DC power input against surges andlightning strikes for current limiting and also filters EMI for the -48 V DC power input.
l The soft-start circuit provides the soft-start function for the -48 V DC power input of the+12 V DC and +3.3 V DC power modules.
l The output filter circuit filters the output of the +12 V DC and +3.3 V DC powermodules.
l The detection and alarm circuit detects the availability of the -48 V DC power andreports related alarms.
l The electronic label and board type reporting circuit stores the board manufacturinginformation and reports the board type.
l The H836VPSKD daughter board is attached on the power board for processingvectoring signals. It is used for calculation and cancellation for crosstalk over lines andprovides a 10 GKR port for a service board connection.
Front Panel Port
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
214
IndicatorIndicator
Name Color Status Meaning
PWR Runningstatusindicator
Green On The board is functioningproperly.
Green Off or Blinking The board is powered off orthe input fuse blows.
SPD Protectionindicator
Green On The board protection circuitis normal.
Green Off or Blinking The board protection circuitis faulty.
Supported Software VersionV800R017C00 and later
3.12.10 H831PAVDA Board DescriptionThe H831PAVDA board is an AC power board. It converts the 220 V AC or 110 V AC powerto -48 V DC, +12 V DC, and +3.3 V DC power and then supplies power to service boards,control board, and fan monitoring board using the backplane. In addition, the H831PAVDAboard supports lead-acid and Fe-lithium batteries for power backup.
Functions and SpecificationsFor details, see Differences Between Power Boards.
The H831PAVDA board also supports the following functions:l Over-temperature, overcurrent, overvoltage, and short-circuit protectionl Temperature detection for lead-acid batteriesl Activating Fe-lithium batteries
Power Consumption of the H836VPDA Daughter BoardFor details, see Board Power Consumption.
Working PrinciplesFigure 3-61 shows the working principles of the H831PAVDA board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
215
Figure 3-61 Working principles of the H831PAVDA board
The basic working principles of the H831PAVDA board are as follows:
The AC/DC power module converts the 220 V AC or 110 V AC input power to the -48 V DCpower and then to the +3.3 V DC and +12 V DC power, respectively, using two DC/DCpower modules and reports alarm signals.
l The protection and filter circuit protects the 220 V AC input power against surges andlightning strikes for current limiting and also filters EMI for the 220 V AC input power.
l The AC/DC power module converts the 220 V AC power to the -48 V DC, +12 V DC,and +3.3 V DC power for the backplane.
l The PMUB board is configured to manage batteries only when the batteries are requiredfor power backup.
l The H836VPBA daughter board, a vectoring processing board, is used to calculate andcancel VDSL line crosstalk.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
216
Front Panel Port
NOTE
The SENSOR port is used to detect the temperature of lead-acid batteries or activate Fe-lithiumbatteries.
IndicatorIndicator
Name Color Status Meaning
PMU Runningstatusindicator
Green On Batteries are being charged,and the PMUB daughterboard is communicating withthe control board properly.
Red On Batteries are being charged,and the PMUB daughterboard fails to communicatewith the control board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
217
Indicator
Name Color Status Meaning
Green Blinking Batteries are discharging,and the PMUB daughterboard is communicating withthe control board properly.
Red Blinking Batteries are discharging,and the PMUB daughterboard fails to communicatewith the control board.
BAT Batteryinputindicator
Green On Batteries are used.
Green Off No batteries are used.
VIN Inputstatusindicator
Green On The module input isfunctional.
Green Off The module input is faulty.
VOUT Outputstatusindicator
Green On The module output isfunctional.
Green Off The module outputmalfunctions. For example,undervoltage, overvoltage,overcurrent, over-temperature, or short-circuitoccurs.
Supported Software VersionV800R313C00 and later
3.12.11 H831PAIA Board DescriptionH831PAIA is an AC power board. It converts the 220 V AC or 110 V AC power to -48 V DC,+12 V DC, and +3.3 V DC power and then supplies power to service boards, control board,and fan monitoring board using the backplane.
Functions and SpecificationsFor details, see Differences Between Power Boards.
Working PrinciplesFigure 3-62 shows the working principles of the H831PAIA board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
218
Figure 3-62 Working principles of the H831PAIA board
MA200-A power module
+12V DC+3.3V DC
Monitoring signal
–48V DC220 V AC or
110 V ACAC power
H831PAIA
SPI bus and board type
Service boards and control board
Backplane
Fan monitoring boardService boards
The basic working principles of the H831PAIA board are as follows:
The MA200-A power module converts the 220 V AC or 110 V AC power to -48 V DC, +12V DC, and +3.3 V DC power and reports alarm signals.
Front Panel Port
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
219
Indicator
Indicator
Name Color Status Meaning
PWR AC statusindicator
Green On The AC module input oroutput is functional.
Red On The AC module input oroutput fails.
- Off No AC power is led in.
Supported Software Version
All versions
3.12.12 H831PAIC Board DescriptionH831PAIC is an AC power board. It converts the 220 V AC or 110 V AC power to -48 V DC,+12 V DC, and +3.3 V DC power and then supplies power to service boards, control board,and fan monitoring board using the backplane.
Functions and Specifications
For details, see Differences Between Power Boards.
Working Principles
Figure 3-63 shows the working principles of the H831PAIC board.
Figure 3-63 Working principles of the H831PAIC board
The basic working principles of the H831PAIC board are as follows:
The MA400-A power module converts the 220 V AC or 110 V AC power to -48 V DC, +12V DC, and +3.3 V DC power and reports alarm signals.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
220
Front Panel Port
IndicatorIndicator
Name Color Status Meaning
PWR AC statusindicator
Green On The AC module input oroutput is functional.
Red On The AC module input oroutput fails.
- Off No AC power is led in.
Supported Software VersionAll versions
3.12.13 H831PAIB Board DescriptionH831PAIB is an AC power board (with power backup). It converts the 220 V AC or 110 VAC power to -48 V DC, +12 V DC, and +3.3 V DC power and then supplies power to service
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
221
boards, control board, and fan monitoring board using the backplane. The H831PAIB boardalso supports battery (lead-acid battery or Fe-lithium battery) input for power backup. Whenthe AC power supply fails, the H831PAIB board switches to the battery for power supply.
Functions and SpecificationsFor details, see Differences Between Power Boards.
H831PAIB board also supports the following functions:l Temperature detection for lead-acid batteriesl Activating Fe-lithium batteries
Working PrinciplesFigure 3-64 shows the working principles of the H831PAIB board.
Figure 3-64 Working principles of the H831PAIB board
The basic working principles of the H831PAIB board are as follows:
l The AC/DC module converts the 220 V AC or 110 V AC power to -48 V DC for thebackplane.
l The PSUA board in the H831PAIB board converts the -48 V DC power transmitted fromthe backplane or the power from batteries transmitted from the front panel to +12 V DCand +3.3 V DC. The PSUA board also supports alarm reporting and manages the ACpower supply and the batteries power supply using the control signals sent from thePMUA board.
l The PMUA board is configured to manage batteries only when the batteries are requiredfor power backup.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
222
Front Panel Port
NOTE
The SENSOR port is used to detect the temperature of lead-acid batteries or activate Fe-lithiumbatteries.
Power Transfer BoardThe H831PAIB board supports the PSUA power transfer board for receiving the -48 V DCpower from the backplane and supplying +3.3 V DC and +12 V DC to the system. The PSUAboard supports the following functions:
l Filters and current-limits the -48 V DC power provided by the backplane.l Leads in the -48 V DC power from batteries and transmits the power to the backplane in
the event of an AC power failure.l Functions as the channel for charging or discharging the battery and therefore integrates
a relay to control the power-on and power-off of the battery.l Implements protection, filtering, and current-limiting at the battery input terminal.l Provides a circuit that reports the board type and an E2PROM circuit that stores board
manufacturing information.
Figure 3-65 shows the position of the PSUA board in the H831PAIB board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
223
Figure 3-65 Position of the PSUA board
PAIB
PSUA
Power Monitoring BoardThe H831PAIB board supports the PMUA power monitoring board. The PMUA boardmanages the battery for the PSUA board. The PMUA board supports the following functions:
l Detects the temperature of the battery and reports detected parameters to the controlboard.
l Detects the fuse status of the battery circuit and reports the detection result to the controlboard.
l Detects the charging current of the battery and reports current parameters to the PSUAboard and the control board.
l Detects the voltage of the busbar and reports voltage parameters to the PSUA board andthe control board.
l Controls power-on and power-off of the battery.
The PMUA board is attached on the PSUA board. Figure 3-66 shows the position of thePMUA board in the H831PAIB board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
224
Figure 3-66 Position of the PMUA board
PAIB
PMUA
Indicator
Indicator
Name Color Status Meaning
PMU Runningstatusindicator(red andgreen bi-colored)
Green On The PMUA board iscommunicating with themain device properly, andbatteries are being charged.
Green Blinking The PMUA board iscommunicating with themain device properly, andbatteries are discharging.
Red On The PMUA board fails tocommunicate with the maindevice, and batteries arebeing charged.NOTE
If the device is not equippedwith batteries, this indicator issteady red by default.
Red Blinking The PMUA board fails tocommunicate with the maindevice, and batteries aredischarging.
BAT Batteryinputindicator
Green On The board is connected to abattery input.
Green Off The board is not connectedto a battery input.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
225
Indicator
Name Color Status Meaning
VIN Inputstatusindicator
Green On The AC module input isfunctional.
Red On The AC module input fails.
- Off There is no AC input.
VOUT Outputstatusindicator
Green On The AC module output isfunctional.
Red On The AC module outputfails.
Supported Software VersionAll versions
3.12.14 VCE Daughter BoardThe VCE daughter board implements the vectoring function for calculating and canceling thecrosstalk on narrowband lines.
NOTE
l A faulty VCE daughter board cannot be replaced with a new one.
l The VCE daughter board must be used with the upstream daughter board of the CCUE controlboard. The upstream daughter board can only be H831UP2AA, H831UP2CA, and H833XP1A.
Ports and FunctionsTable 3-83 lists the ports and functions provided by the VCE daughter boards on the powerboard.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
226
Table 3-83 Ports and functions provided by the daughter boards on the control board
DaughterBoard
Compatibilitywith the ControlBoard
Port Function
H836VPBA
l H831PAVDA:AC power board
l H832PDVAA:DC power board
ETH port (connectedto the backplane)
l The board works with SLV.l The ETH port is used for
communicating between theH836VPBA daughter boardand H831CCUE controlboard, and enables theH831CCUE control board toload software to theH836VPBA daughter boardonline.
l H836VPBA can be used withservice boards H83DVCMM,H83DCCME, H83DCSME,H83BVCLE, H83BVCMM,H83BVCLF, H83DVCPE,and H83DVCPD.NOTE
l Service boardsH83DVCMM, H83DCCME,H83DCSME, H83BVCLE,H83BVCMM, andH83BVCLF are slotcompatible.
l H83DVCPE andH83DVCPD are slotcompatible.
l Service boardsH83DVCMM, H83DCCME,H83DCSME, H83BVCLE,H83BVCMM, andH83BVCLF are not slotcompatible withH83DVCPE andH83DVCPD.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
227
DaughterBoard
Compatibilitywith the ControlBoard
Port Function
H836VPDA
H832PDNAA: DCpower board
l GE port (outputport on the powerboard panel)
l VEI port (outputport on the powerboard panel)
l ETH port(connected to thebackplane)
l The board works with NLV.l The VEI port is used for
transmitting vectoring servicesignals between twoMA5616s, canceling crosstalkon VDSL2 lines connectedbetween the two MA5616s. Inaddition, this port can be usedfor transmitting managementsignals between twoMA5616s.
l The ETH port is used forcommunicating between theH836VPDA daughter boardand H831CCUE controlboard, and enables theH831CCUE control board toload software to theH836VPDA daughter boardonline.
l H836VPDA can be used withservice boards H83BVCLE,H83BVCMM, H83BVCLF.NOTE
l Service boards H83BVCLE,H83BVCMM, andH83BVCLF are slotcompatible.
H836VPSHD
H832PDVSA: DCpower board
ETH port (connectedto the backplane)
l The board works with SLV.l The ETH port is used for
communicating between theH836VPSHD daughter boardand H831CCUE controlboard, and enables theH831CCUE control board toload software to theH836VPSHD daughter boardonline.
l H836VPSHD can be usedwith service boardsH83DSDMM, H83DVCMM,H83DCCME, H83DCSME,H83BVCLE, H83BVCMM,and H83BVCLF and serviceboards are slot compatible.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
228
DaughterBoard
Compatibilitywith the ControlBoard
Port Function
H836VPSKD
H832PDVSB: DCpower board
ETH port (connectedto the backplane)
l The board works with SLV.l The ETH port is used for
communicating between theH836VPSKD daughter boardand H831CCUE controlboard, and enables theH831CCUE control board toload software to theH836VPSKD daughter boardonline.
l H836VPSKD can be usedwith service boardsH83DSDMM, H83DVCMM,H83DCCME, andH83DCSME and serviceboards are slot compatible.
H836VPME
H832PDMSB: DCpower board
l Two VEI ports(output port onthe power boardpanel)
l ETH port(connected to thebackplane)
l The board works with SLV.l The ETH port is used for
communicating between theH836VPME daughter boardand H831CCUE controlboard, and enables theH831CCUE control board toload software to theH836VPME daughter boardonline.
l H836VPME can be used withservice boards H83DSDMM,H83DVCMM, H83DCCME,and H83DCSME and serviceboards are slot compatible.
3.13 Board IndicatorIndicators are present on the front panel of each board.
The follow table lists the indicators on the front panel of the CCUB control board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
229
Indicator
Name Color Status Meaning Holding theH831GP1Adaughterboard
Holding theH831GE1Adaughterboard
RUNALM
Runningstatus LED
Green Blinking (onfor 0.25s andoff for 0.25srepeatedly)
The boardstarts up andis beingloaded.
Supported
Supported
Green Blinking (onfor 1s andoff for 1srepeatedly)
The board isrunningproperly.
Red On The board isfaulty.
LINK link statusLED
Green On The linkfunctionsproperly.
GEopticalportandPONport
GEopticalport
Green Off The linkmalfunctions.
ACT Data statusLED (GEoptical port)
Green Blinking Data isbeingtransmitted.
Supported
Supported
Green Off No data isbeingtransmitted.
AUTH
Authentication LED (PONport)
Green Blinking (onfor 0.25s andoff for 0.25srepeatedly)
Anauthentication is beingperformed.
Supported
Notsupported
Green On Anauthentication issuccessful.
Green Off Noauthentication is beingperformed.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
230
Indicator
Name Color Status Meaning Holding theH831GP1Adaughterboard
Holding theH831GE1Adaughterboard
ETH ETH portstatusindicator
Green On Aconnectionis set up onthe port.
Supported
Supported
Green Off Noconnectionis set up onthe port.
Yellow Blinking The port istransmittingor receivingdata.
Yellow Off No data isbeingtransmittedon the port
GE0 GE electricalport statusindicator
Green On Aconnectionis set up onthe port.
Supported
Supported
Green Off Noconnectionis set up onthe port.
Yellow Blinking The port istransmittingor receivingdata.
Yellow Off No data isbeingtransmittedon the port
The follow table lists the indicators on the front panel of the CCUC control board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
231
Indicator
Name Color Status Meaning
RUN/ALM
Running statusLED
Green Blinking (on for 0.25sand off for 0.25srepeatedly)
The board starts upand is being loaded.
Green Blinking (on for 1sand off for 1srepeatedly)
The board is runningproperly.
Red On The board is faulty.
SYNC Synchronizationstatus indicator
Green On The system issynchronized.
Red On The system is notsynchronized.
LINK Link status LED(GE optical portand PON port)
Green On The link functionsproperly and aconnection is set upon the port.
Green Off The link malfunctionsand no connectionsare set up on the port.
ACT Data status LED(GE optical port)
Green Blinking Data is beingtransmitted.
Green Off No data is beingtransmitted.
AUTH AuthenticationLED (PON port)
Green Blinking (on for 0.25sand off for 0.25srepeatedly)
An authentication isbeing performed.
Green On An authentication issuccessful.
Green Off No authentication isbeing performed.
The follow table lists the indicators on the front panel of the CCUE control board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
232
Indicator
Name Color Status Meaning ConfiguredwithH831UP2A orUP2Cdaughterboard
ConfiguredwithH833XP1Adaughterboard
RUN/ALM
Runningstatusindicator
Green Blinking (onfor 0.25s andoff for 0.25srepeatedly)
The boardstarts up andis beingloaded.
Supported
Supported
Green Blinking (onfor 1s andoff for 1srepeatedly)
The boardfunctionsproperly.
Red On The board isfaulty.
SYNC Synchronization statusindicator
Green On The systemissynchronized.
Supported
Supported
Red On The systemis notsynchronized.
LINK link statusindicator
Green On The linkfunctionsproperly anda connectionis set up onthe port.
GEopticalportandPONport
10GGPONopticalport
Green Off The linkmalfunctionsand noconnectionsare set up onthe port.
ACT Data statusindicator (GEoptical port)
Green Blinking Data isbeingtransmitted.
Supported
Notsupported
Green Off No data isbeingtransmitted.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
233
Indicator
Name Color Status Meaning ConfiguredwithH831UP2A orUP2Cdaughterboard
ConfiguredwithH833XP1Adaughterboard
AUTH
Authentication indicator
Green Blinking (onfor 0.25s andoff for 0.25srepeatedly)
Anauthentication is beingperformed.
PONport
10GGPONopticalport
Green On Anauthentication issuccessful.
Green Off Noauthentication is beingperformed.
ETH ETH portstatusindicator
Green On Aconnectionis set up onthe port.
Supported
Supported
Green Off Noconnectionis set up onthe port.
Yellow Blinking The port istransmittingor receivingdata.
Yellow Off No data isbeingtransmittedon the port
GE GE electricalport statusindicator
Green On Aconnectionis set up onthe port.
Supported
Supported
Green Off Noconnectionis set up onthe port.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
234
Indicator
Name Color Status Meaning ConfiguredwithH831UP2A orUP2Cdaughterboard
ConfiguredwithH833XP1Adaughterboard
Yellow Blinking The port istransmittingor receivingdata.
Yellow Off No data isbeingtransmittedon the port
The follow table lists the indicators on the front panel of the ADSL2+/SHDSL/VDSL2service boards.
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
The follow table lists the indicators on the front panel of the Combo service boards.
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On Board startup phase: the boardhas been powered on and isbeing initialized.Board running phase: the boardis running properly.
Red On Board startup phase: the board isautomatically loading data and isbeing automatically discovered.Board running phase: the boardis faulty.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
235
The follow table lists the indicators on the front panel of the ethernet service boards.
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green On The board is runningproperly.
Red On The board is faulty.
- Data/Linkstatusindicator
Green Blinking (1s on and 1soff)
A link has been set up on theport, and data is beingtransmitted.
Green On A link has been set up on theport, but no data is beingtransmitted.
- Off The link malfunctions andfails to set up on the port.
The follow table lists the indicators on the front panel of the voice service boards.
Indicator Name Color Status Meaning
RUN ALM Running statusindicator
Green On The board isrunningproperly.
Red On The board isfaulty.
The follow table lists the indicators on the front panel of the H831EDTB board.
Indicator
Name Color Status Meaning
RUNALM
Runningstatusindicator
Green Blinking quickly (onfor 0.25s and off for0.25s repeatedly)
The board is starting up andloading data.
Green Blinking slowly (on for1s and off for 1srepeatedly)
The board is runningproperly.
Red On The board is faulty.
The follow table lists the indicators on the front panel of the H831PDIA/H832PDVA/H832PDVAA/H832PDMSB/H832PDVSA/H832PDVSB DC power boards.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
236
Indicator
Name Color Status Meaning
PWR Runningstatusindicator
Green On The board is functioningproperly.
Green Off or Blinking The board is powered off orthe input fuse blows.
SPD Protectionindicator
Green On The board protection circuitis normal.
Green Off or Blinking The board protection circuitis faulty.
The follow table lists the indicators on the front panel of the H832PDIA DC power board.
Indicator
Name Color Status Meaning
PWR0 Powerstatusindicator(DCinput"0")
Green On The circuit of DC input"0" is functional.
Green Off DC input 0 is notavailable or the circuitof DC input "0" isfaulty.
PWR1 Powerstatusindicator(DCinput"1")
Green On The circuit of DC input"1" is functional.
Green Off DC input 1 is notavailable or the circuitof DC input "1" isfaulty.
SPD Protectionindicator
Green On A link has been set upon the port, and data isbeing transmitted.
Green Off A link has been set upon the port, but no datais being transmitted.
The follow table lists the indicators on the front panel of the H832PDNAA DC power board.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
237
Indicator
Name Color Status Meaning
PWR Runningstatusindicator
Green On The board is functioningproperly.
Green Off or Blinking The board is poweredoff or the input fuseblows.
SPD Protectionindicator
Green On The board protectioncircuit is normal.
Green Off or Blinking The board protectioncircuit is faulty.
LINK Linkindicatorof theVEI port
Green On The link connected tothe VEI port isfunctional.
Green Off No link is connected tothe VEI port.
The follow table lists the indicators on the front panel of the H831PAVDA AC power board.
Indicator
Name Color Status Meaning
PMU Runningstatusindicator
Green On Batteries are being charged,and the PMUB daughterboard is communicating withthe control board properly.
Red On Batteries are being charged,and the PMUB daughterboard fails to communicatewith the control board.
Green Blinking Batteries are discharging,and the PMUB daughterboard is communicating withthe control board properly.
Red Blinking Batteries are discharging,and the PMUB daughterboard fails to communicatewith the control board.
BAT Batteryinputindicator
Green On Batteries are used.
Green Off No batteries are used.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
238
Indicator
Name Color Status Meaning
VIN Inputstatusindicator
Green On The module input isfunctional.
Green Off The module input is faulty.
VOUT Outputstatusindicator
Green On The module output isfunctional.
Green Off The module outputmalfunctions. For example,undervoltage, overvoltage,overcurrent, over-temperature, or short-circuitoccurs.
The follow table lists the indicators on the front panel of the H831PAIA/H831PAIC ACpower boards.
Indicator
Name Color Status Meaning
PWR AC statusindicator
Green On The AC module input oroutput is functional.
Red On The AC module input oroutput fails.
- Off No AC power is led in.
The follow table lists the indicators on the front panel of the H831PAIB AC power board(withpower backup).
Indicator
Name Color Status Meaning
PMU Runningstatusindicator(red andgreen bi-colored)
Green On The PMUA board iscommunicating with themain device properly, andbatteries are being charged.
Green Blinking The PMUA board iscommunicating with themain device properly, andbatteries are discharging.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
239
Indicator
Name Color Status Meaning
Red On The PMUA board fails tocommunicate with the maindevice, and batteries arebeing charged.NOTE
If the device is not equippedwith batteries, this indicator issteady red by default.
Red Blinking The PMUA board fails tocommunicate with the maindevice, and batteries aredischarging.
BAT Batteryinputindicator
Green On The board is connected to abattery input.
Green Off The board is not connectedto a battery input.
VIN Inputstatusindicator
Green On The AC module input isfunctional.
Red On The AC module input fails.
- Off There is no AC input.
VOUT Outputstatusindicator
Green On The AC module output isfunctional.
Red On The AC module outputfails.
3.14 Optical ModuleThis topic describes the types and specifications of pluggable optical modules supported bythe MA5616.
The MA5616 supports small form-factor pluggable (SFP) and enhanced small form-factorpluggable (eSFP) encapsulation modes for optical modules. An SFP packet has the same sizeas an eSFP packet. In eSFP encapsulation mode, performance data that cannot be reported inSFP encapsulation mode can be reported.
An optical module has the following types of interfaces: LC/PC, SC/PC, and RJ45 (forelectrical modules). Figure 3-67 shows the appearance of the optical module.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
240
Figure 3-67 Appearance of the optical module
GPON optical moduleIf an optical module for GPON upstream transmission is configured on an H831CCUC orH831CCUE board that is equipped with the UP2A or UP2C daughter board, connect oneSC/PC optical fiber to the board for GPON upstream transmission. Table 3-84 lists thespecifications of GPON optical modules.
Table 3-84 Specifications of GPON optical modules
Type One-fiber bi-directional optical module
OperatingWavelength
Tx: 1310 nmRx: 1490 nm
Encapsulation Type SFP
Rate Tx: 1.244 Gbit/sRx: 2.488 Gbit/s
Minimum OutputOptical Power
0.5 dBm
Maximum OutputOptical Power
5.0 dBm
Maximum ReceiverSensitivity
-27.0 dBm
Optical ConnectorType
SC/PC
Optical Fiber Type Single-mode
Reach 20.0 km
Overload opticalpower
-8 dBm
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
241
XG-PON optical moduleIf an optical module for XG-PON upstream transmission is configured on an H831CCUC orH831CCUE board that is equipped with the XP1A daughter board, connect one SC/PCoptical fiber to the board for XG-PON upstream transmission. Table 3-85 lists thespecifications of XG-PON optical modules.
Table 3-85 Specifications of XG-PON optical module
Type One-fiber bi-directional optical module
Operating Wavelength Tx: 1270 nmRx: 1577 nm
Encapsulation Type SFP
Rate Tx: 2.488 Gbit/sRx: 9.952 Gbit/s
Minimum Output Optical Power 2 dBm
Maximum Output Optical Power 7 dBm
Maximum Receiver Sensitivity -28 dBm
Optical Connector Type SC/PC
Optical Fiber Type Single-mode
Reach 20.0 km
Overload optical power -8 dBm
GE Electrical ModuleIf a GE electrical module is configured on an H831CCUC board that is equipped with theUP2A or UP2C daughter board, connect one network cable to the board for one-channel GE.Table 3-86 the specifications of GE electrical module.
Table 3-86 Specifications of GE electrical modules
Type Module with 1000 Base-T RJ45 electrical port
Encapsulation Type SFP
Rate Full-duplex 1000 Mbit/s
Reach 100.0 m
GE optical moduleA GE optical module can be configured on an H831CCUB that is equipped with the GP1AorGE1A daughter board, H831CCUC or H831CCUE that is equipped with the UP2A or UP2C
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
242
daughter board, or H831EIUD board. The optical module with independent receive andtransmit functions is connected to two LC/PC optical fibers to provide one GE channel, andthe optical module with combined receive and transmit functions is connected to one LC/PCoptical fiber to provide one GE channel. Table 3-87 lists the specifications of GE opticalmodules.
Table 3-87 Specifications of GE optical modules
Type Two-fiber bi-directionaloptical module
One-fiber bi-directional optical module
No. 1 2 3 4 5 6 7
OperatingWavelength
850nm
1310nm
1310nm
Tx:1310nmRx:1490nm
Tx:1490nmRx:1310nm
Tx: 1310nmRx: 1490nm
l Tx:1310nmRx:1550nm
l Tx:1550nmRx:1310nm
EncapsulationType
eSFP eSFP eSFP eSFP eSFP CSFP eSFP
Rate 2.125Gbit/s1.25Gbit/s1.063Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25Gbit/s
1.25 Gbit/s 1.25 Gbit/s
MinimumOutputOpticalPower
-9.5dBm
-9.0dBm
-5.0dBm
-9.0dBm
-9.0dBm
-9.0 dBm -3.0 dBm
MaximumOutputOpticalPower
-2.5dBm
-3.0dBm
0 dBm -3.0dBm
-3.0dBm
-3.0 dBm 2 dBm
MaximumReceiverSensitivity
-17.0dBm
-20.0dBm
-23.0dBm
-19.5dBm
-19.5dBm
-24.0 dBm -25.0 dBm
OpticalConnector Type
LC/PC LC/PC LC/PC LC/PC LC/PC LC LC
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
243
OpticalFiberType
Multi-mode
Single-mode
Single-mode
Single-mode
Single-mode
Single-mode Single-mode
Reach 0.50km
10.0km
40.0km
10.0km
10.0km
10.0 km 40.0 km
Overload opticalpower
0 dBm -3.0dBm
-3.0dBm
-3.0dBm
-3.0dBm
-3.0 dBm -3.0 dBm
10GE Optical ModuleThe 10GE optical module is connected to two LC fibers to provide one 10GE channel. Table3-88 lists the specifications of 10GE optical modules.
Table 3-88 Specifications of 10GE optical modules
Type One-fiber bi-directional optical module
No. 1 2
Operating Wavelength Tx: 1270 nmRx: 1330 nm
Tx: 1270 nmRx: 1330 nm
Encapsulation Type eSFP eSFP
Rate 9.95-10.3 Gbit/s 2.5-11.3 Gbit/s
Minimum OutputOptical Power
0.0 dBm -8.2 dBm
Maximum OutputOptical Power
5.0 dBm 0.5 dBm
Maximum ReceiverSensitivity
-18.0 dBm -14.4 dBm
Optical Connector Type LC LC
Optical Fiber Type Single-mode Single-mode
Reach 40.0 km 10.0 km
Overload optical power -9.0 dBm 0.5 dBm
CSFP Optical ModuleThe CSFP optical module is connected to two LC fibers to provide two GE channel. Table3-89 lists the specifications of CSFP optical modules.
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
244
Table 3-89 Specifications of CSFP optical modules
Type One-fiber bi-directional optical module
Operating Wavelength Tx: 1310 nmRx: 1490 nm
Encapsulation Type CSFP
Rate 1.25 Gbit/s
Minimum Output Optical Power –9.0 dBm
Maximum Output Optical Power –3.0 dBm
Maximum Receiver Sensitivity -24.0 dBm
Optical Connector Type LC
Optical Fiber Type Single-mode
Reach 10.0 km
Overload optical power -3.0 dBm
FE optical module
A FE optical module can be configured on an H831EIUD board, connect one LC/PC opticalfiber to the board for one-channel FE. Table 3-90 lists the specifications of FE opticalmodules.
Table 3-90 Specifications of FE optical modules
Type One-fiber bi-directional optical module
No. 1 2
OperatingWavelength
Tx: 1310 nmRx: 1550 nm
Tx: 1550 nmRx: 1310 nm
Encapsulation Type eSFP eSFP
Rate STM-1 STM-1
Minimum OutputOptical Power
-15.0 dBm -15.0 dBm
Maximum OutputOptical Power
-8.0 dBm -8.0 dBm
Maximum ReceiverSensitivity
-32.0 dBm -32.0 dBm
Optical ConnectorType
LC/PC LC/PC
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
245
Optical Fiber Type Single-mode Single-mode
Reach 15.0 km 15.0 km
Overload opticalpower
-8 dBm -8 dBm
SmartAX MA5616 Multi-service Access ModuleHardware Description 3 Board
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
246
4 Cable
About This Chapter
This topic covers the applications, appearances, pin assignments, and technical specificationsof the cables for the MA5616 chassis.
4.1 DC Power CableThe DC power cable is used to transmit the DC power to loads and enable the loads to workin the normal state.
4.2 AC Power CableAn AC power cable is used to transmit AC power supply to loads and enable the loads towork in the normal state.
4.3 Lead-acid Battery Power CableA lead-acid battery power cable is used for feeding DC power to loads and also for chargingand discharging a lead-acid battery.
4.4 Fe-lithium Battery Power CableA Fe-lithium battery power cable is used for feeding DC power to loads and also for chargingand discharging a Fe-lithium battery module.
4.5 PGND CableA PGND cable is used for protecting the device against lightning strikes and interference.
4.6 Local Maintenance Serial CableA local maintenance serial cable is used for debugging devices or maintaining devices at thelocal end.
4.7 Local Maintenance and Environment Monitoring Combo CableA local maintenance and environment monitoring combo cable is connected to a localmaintenance terminal or an environment monitoring device for debugging and maintainingthe main device or reporting the monitoring information to the control board.
4.8 Network CableA network cable is used for equipment cascading, communication between the device and thenetwork, and local maintenance and remote access of the device.
4.9 CXP High-Speed Cable
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
247
A CXP high-speed cable connects two MA5616s to form a node level vectoring (NLV)system, canceling the crosstalk on VDSL2 lines between the two MA5616s.
4.10 Environment Monitoring CableAn environment monitoring cable connects the control board of the device to sensors forcollecting the information about various environmental parameters.
4.11 Clock Bridging CableThe clock Bridging cable is a 120-ohm-to-75-ohm clock cable and is used for transmittingclock/time signals.
4.12 Subscriber CableThis topic covers the applications, appearances, pin assignments, and technical specificationsof subscriber cables.
4.13 E1 Trunk CableThis topic covers the applications, appearances, pin assignments, and technical specificationsof E1 trunk cables.
4.14 Optical FiberAn optical fiber connects an optical port to an upstream device or optical network terminal.
4.1 DC Power CableThe DC power cable is used to transmit the DC power to loads and enable the loads to workin the normal state.
ApplicationThe DC power cable connects the power port of the chassis to the external power supply. It isconnected as follows:
l One end of the DC power cable is connected to the input port on the DC power board ofthe chassis.
l The other end of the DC power cable is bare wires. According to the output port type ofthe DC power, a corresponding terminal is made and then connected to the output port ofthe DC power supply.
NOTE
The black cable is the -48 V return ground cable connected to the RTN(+) terminal of the DC power board.The blue cable is the -48 V power cable connected to the NEG(-) terminal of the DC power board.
Appearance and StructureFigure 4-1 and Figure 4-2 show the appearances of a -48 V return ground cable and a -48 Vpower cable.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
248
Figure 4-1 Appearance of a -48 V return ground cable
Figure 4-2 Appearance of a -48 V power cable
Figure 4-3 shows the structure of a DC power cable.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
249
Figure 4-3 Structure of a DC power cable
Technical Specifications
The technical specifications of a -48 V return ground cable and a -48 V power cable are thesame, as listed in Table 4-1.
Table 4-1 Technical specifications of a -48 V return ground cable and a -48 V power cable
Parameter Description
Cable type Electrical cable
Color Black (-48 V return ground cable); blue (-48 V power cable)
Connector (X1) type OT terminal
DC resistance of the innerconductor
23.2 ohms/km
Cross-sectional area of theconductor
18 AWG (0.83 mm2)
4.2 AC Power CableAn AC power cable is used to transmit AC power supply to loads and enable the loads towork in the normal state.
Application
An AC power cable supplies the working voltage for the chassis. It is connected as follows:
l One end of the AC power cable is connected to the AC power input port of the chassis.
l The other end of the AC power cable is connected to the output port of the AC powersupply.
Appearance
Figure 4-4 shows the appearance of an AC power cable.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
250
Figure 4-4 Appearance of an AC power cable
Technical SpecificationsTable 4-2 lists the technical specifications of an AC power cable.
NOTE
Specifications of the AC power cable vary with country/area. The following uses the AC power cablethat meets the Chinese standard as an example.
Table 4-2 Specifications of an AC power cable
Parameter Description
Connector 1 PI straight male
Connector 2 C13 straight female
Cable type External power cable
Cable length 1.8 m
Cross-sectional area of the conductor 1.0 mm2
4.3 Lead-acid Battery Power CableA lead-acid battery power cable is used for feeding DC power to loads and also for chargingand discharging a lead-acid battery.
ConnectionA lead-acid battery power cable connects the battery power port of the chassis to a lead-acidbattery. It is connected as follows:
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
251
l One end of the cable is connected to the battery power port on the AC power board (withpower backup) in the chassis.
l The other end of the cable is connected to the positive and negative poles of a lead-acidbattery.
NOTE
A lead-acid battery power cable consists of a -48 V return ground cable and a -48 V power cable.
l The black one is the -48 V return ground cable, connected to the BAT(+) terminal of the AC power board(with power backup).
l The blue one is the -48 V power cable, connected to the BAT(-) terminal of the AC power board (withpower backup).
Appearance and Structure
Figure 4-5 shows the appearance of a lead-acid battery power cable.
Figure 4-5 Appearance of a lead-acid battery power cable
Figure 4-6 shows the structure of a lead-acid battery power cable.
Figure 4-6 Structure of a lead-acid battery power cable
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
252
Technical SpecificationsTable 4-3 lists the technical specifications of a lead-acid battery power cable.
Table 4-3 Technical specifications of a lead-acid battery power cable
Parameter Description
Cable type Electronic power cable
Color Black (-48 V return ground cable); blue (-48 V power cable)
Connector (X1) type OT terminal
Connector (X2) type Common terminal (female)
DC resistance of the innerconductor
9.46 ohms/km
Cross-sectional area of theconductor
14 AWG (2.5 mm2)
4.4 Fe-lithium Battery Power CableA Fe-lithium battery power cable is used for feeding DC power to loads and also for chargingand discharging a Fe-lithium battery module.
ConnectionA Fe-lithium battery power cable connects the Fe-lithium battery power port of the chassis toa Fe-lithium battery module. It is connected as follows:
l One end of the cable is connected to the battery power port on the AC power board (withpower backup) in the chassis.
l The other end of the cable is connected to the power port of a Fe-lithium battery module.
NOTE
A Fe-lithium battery power cable consists of a -48 V return ground cable and a -48 V power cable.
l The black one is the -48 V return ground cable, connected to the BAT(+) terminal of the AC power board(with power backup).
l The blue one is the -48 V power cable, connected to the BAT(-) terminal of the AC power board (withpower backup).
Appearance and StructureFigure 4-7 shows the appearance of a Fe-lithium battery power cable.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
253
Figure 4-7 Appearance of a Fe-lithium battery power cable
Figure 4-8 shows the structure of a Fe-lithium battery power cable.
Figure 4-8 Structure of a Fe-lithium battery power cable
Technical Specifications
Table 4-4 lists the technical specifications of a Fe-lithium battery power cable.
Table 4-4 Technical specifications of a Fe-lithium battery power cable
Parameter Description
Cable type Electronic power cable
Color Black (-48 V return ground cable); blue (-48 V power cable)
Connector (X1/X2) type OT terminal
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
254
Parameter Description
DC resistance of the innerconductor
9.46 ohms/km
Cross-sectional area of theconductor
14 AWG (2.5 mm2)
4.5 PGND CableA PGND cable is used for protecting the device against lightning strikes and interference.
ConnectionThe connections of a PGND cable are as follows:
l One end of the PGND cable (OT 6-4) is connected to the ground point of the chassis.l The other end of the PGND cable (OT 6-6) is connected to the ground point of the
cabinet.
Appearance and StructureFigure 4-9 shows the appearance of a PGND cable.
Figure 4-9 Appearance of a PGND cable
Figure 4-10 shows the structure of a PGND cable.
Figure 4-10 Structure of a PGND cable
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
255
Technical SpecificationsTable 4-5 lists the technical specifications of a PGND cable.
Table 4-5 Technical specifications of a PGND cable
Parameter Description
Cable type Electrical cable
Color Yellow and green
Connector (X1) type OT 6-4
Connector (X2) type OT 6-6
Wire gauge of the inner conductor 10 AWG (6 mm2)
Maximum current 50.0 A
4.6 Local Maintenance Serial CableA local maintenance serial cable is used for debugging devices or maintaining devices at thelocal end.
Cable Appearance
RJ45 connectorConnected to a
maintenance serial port of the device
DB9 female connectorConnected to the
maintenance terminal
DB25 Female connectorConnected to the
maintenance terminal
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
256
Cable Structure
Table 4-6 Pin assignments of the local maintenance serial cable
Connector Pin Mapping
X2 (RJ45) 1 2 3 4 5 6 7 8
X1 (DB-25) 5 6 3 1 7 2 20 4
X3 (DB-9) 8 6 2 5 5 3 4 7
Technical SpecificationsSpecification Description
Connector type DB-9 female + Ethernet port 8-pin/DB-25 female
Cable type Symmetrical twisted pair
Color Dark blue
Wire diameter of the innerconductor
0.38 mm
Wire gauge of the innerconductor
28 AWG (cross-sectional area ≈ 0.08 mm2)
Number of wires 8
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
257
4.7 Local Maintenance and Environment MonitoringCombo Cable
A local maintenance and environment monitoring combo cable is connected to a localmaintenance terminal or an environment monitoring device for debugging and maintainingthe main device or reporting the monitoring information to the control board.
Application
A local maintenance and environment monitoring combo cable is connected as follows:
l One end provides an RJ45 connector and is connected to the CON/ESC port of thecontrol board.
l The other end provides an RJ45 connector and a RJ45 jack:– RJ45 connector: connected to an environment monitoring device.– RJ45 jack: connected to a local maintenance terminal.
Figure 4-11 shows the structure of a local maintenance and environment monitoring combocable.
Figure 4-11 Structure of a local maintenance and environment monitoring combo cable
Pin Assignments
Table 4-7 describes the pin assignments of a local maintenance and environment monitoringcombo cable.
Table 4-7 Pin assignments of a local maintenance and environment monitoring combo cable
Cable Connector X1 Connectors X2 and X3 Color Relationship
W1 X1.1 X2.4 White Pair
X1.2 X2.5 Blue
X1.7 X2.1 White Pair
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
258
Cable Connector X1 Connectors X2 and X3 Color Relationship
X1.8 X2.2 Orange
X1.4 X2.6 Green -
X1.Shell X2.Shell Shield -
W2 X1.3 X3.3 White Pair
X1.6 X3.6 Blue
X1.5 X3.5 White -
X1.Shell X3.Shell Shield -
Technical SpecificationsTable 4-8 lists the technical specifications of a local maintenance and environmentmonitoring combo cable.
Table 4-8 Technical specifications of a local maintenance and environment monitoring combocable
Parameter Specification
Connector X1 type MP8-VI
Connector X2 type MP8-VI
Connector X3 type DB9 female
Cable W1 type Symmetrical twisted pair-100 ohms-4 pairs
Cable W2 type Symmetrical twisted pair-100 ohms-2 pairs
Color Black
Core diameter of the innerconductor
0.48 mm
Wire gauge of the inner conductor 26 AWG
4.8 Network CableA network cable is used for equipment cascading, communication between the device and thenetwork, and local maintenance and remote access of the device.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
259
Cable Appearance
Cable StructureMain label
X1 X2
View A
A
1 8
Table 4-9 Pin assignments of a straight-through cable
X1 Pin Wire Color X2 Pin
1 White and orange 1
2 Orange 2
3 White and green 3
4 Blue 4
5 White and blue 5
6 Green 6
7 White and brown 7
8 Brown 8
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
260
Table 4-10 Pin assignments of a crossover cable
X1 Pin Wire Color X2 Pin
1 White and orange 3
2 Orange 6
3 White and green 1
4 Blue 4
5 White and blue 5
6 Green 2
7 White and brown 7
8 Brown 8
Technical SpecificationsSpecification Description
Connector (X1/X2) RJ45 connector
Type Category-3 and category-5 unshielded twisted pairs(UTP-3 and UTP-5) or shielded twisted pairs (STP)
Color Dark gray
Characteristic impedance 100.0 ohms
Wire diameter of the innerconductor
0.510 mm
Breakdown voltage 500.0 V
DC resistance of the innerconductor
93.8 ohms/km
Number of wires 8
Frequency range 0-100 MHz
Frequency attenuation 22 dB/100 m@100 MHz
4.9 CXP High-Speed CableA CXP high-speed cable connects two MA5616s to form a node level vectoring (NLV)system, canceling the crosstalk on VDSL2 lines between the two MA5616s.
Cable ConnectionThe connection of a CXP high-speed cable is as follows:
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
261
l One end of the cable connects to the VEI port on the cascading MA5616.
l The other end of the cable connects to the VEI port on the cascaded MA5616.
Cable Structure
Figure 4-12 shows the structure of the CXP high-speed cable.
Figure 4-12 Structure of the CXP high-speed cable
Wiring Chart
Figure 4-13 shows the wiring chart of the CXP high-speed cable.
Figure 4-13 Wiring chart of the CXP high-speed cable
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
262
Technical SpecificationsTable 4-11 lists the technical specifications of the CXP high-speed cable.
Table 4-11 Technical specifications of the CXP high-speed cable
Item Parameter
Connector X1 or X2 CXP84M
Color Black
Jacket material PVC
Flame-retardant rating UL CL2 or VW-1
Number of cores two cables, each providing 12 pairs of wires
Wire diameter of theconductor
30 AWG
Length 1.5 m, 3.0 m or 5.5 m
Bending radius 24 mm
Maximum outgoing linelength
55 mm
4.10 Environment Monitoring CableAn environment monitoring cable connects the control board of the device to sensors forcollecting the information about various environmental parameters.
ConnectionAn environment monitoring cable gathers signals of various sensors and transmits the signalsto the control board for processing. It is connected as follows:
l One end of the cable is a DB-9 plug connecting to a DB-9 jack, leading out multiplewires to connect to corresponding sensors.
l The other end of the cable is an RJ45 connector connecting to the ALARM port on thecontrol board.
Appearance and StructureFigure 4-14 shows the appearance of an environment monitoring cable.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
263
Figure 4-14 Appearance of an environment monitoring cable
Figure 4-15 shows the structure of an environment monitoring cable.
Figure 4-15 Structure of an environment monitoring cable
Pin Assignments
Table 4-12 describes the pin assignments of an environment monitoring cable.
Table 4-12 Pin assignments of an environment monitoring cable
X1 Pin Wire Color X2 Pin
1 Blue 1
2 White and blue 2
3 Orange 3
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
264
X1 Pin Wire Color X2 Pin
4 White and orange 4
5 Green 5
6 White and green 6
7 Brown 7
8 White and brown 8
Technical Specifications
Table 4-13 lists the technical specifications of an environment monitoring cable.
Table 4-13 Technical specifications of an environment monitoring cable
Parameter Description
Connector (X1) type DB-9 plug
Connector (X2) type RJ45 connector
Cable type UTP CAT5E
Color PANTONE 430U
Characteristic impedance 100.0 ohms
Core diameter of the innerconductor
0.500 mm
Breakdown voltage 500.0 V
DC resistance of the innerconductor
93.8 ohms/km
Number of wires 8
Frequency range 0-100 MHz
Frequency attenuation 22 dB/100 m@100 MHz
4.11 Clock Bridging CableThe clock Bridging cable is a 120-ohm-to-75-ohm clock cable and is used for transmittingclock/time signals.
Connection
The clock Bridging cable is connected as follows:
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
265
l One end of the cable is an RJ45 connector connecting to the CLK/TOD port on thecontrol board.
l The other end is connected to the external clock device. The connector must be madebased on the on-site situation.
Structure
Figure 4-16 shows the structure of the clock bridging cable.
Figure 4-16 Structure of the clock bridging cable
Pin Assignment
Table 4-14 lists the pin assignment of the clock bridging cable connector.
Table 4-14 Pin assignment of the clock bridging cable connector
120-Ohm Cable 75-Ohm Cable
Connector Pin Color Relation Core No.
X1.1 Orange Twisted pair W1
X1.2 White
X1.4 Blue Twisted pair W2
X1.5 White
X1.3 Green Twisted pair W3
X1.6 White
X1.7 White Twisted pair W4
X1.8 Brown
Technical Specifications
Table 4-15 lists the technical specifications of the clock bridging cable.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
266
Table 4-15 Technical specifications of the clock bridging cable
Item Specification
Cable 120 ohm To 75 ohm Clock Cable
Connector X1type
Network Interface Connector, 8-Bit 8PIN, Crystal Model Connector
120-ohm cabletype
Twisted-Pair Cable, 120 ohm, SEYVP, 0.4 mm, 26AWG, 4Pairs,Pantone 430U
75-ohm cabletype
Coaxial Cable, SYV-75-2-2(4.0Z)-1/0.34 mm, OD3.9 mm, Double-Layer Copper Braid Shielded
4.12 Subscriber CableThis topic covers the applications, appearances, pin assignments, and technical specificationsof subscriber cables.
4.12.1 32-Channel Subscriber CableA 32-Channel subscriber cable connects a service board to the MDF for transmitting audio,video and data signals.
ApplicationOne end of a 32-channel subscriber cable is a Champ 64-pin connector connected to a port ofa service board, and the other end is bare wires connected to the MDF.
Appearance and StructureFigure 4-17 shows the appearance of a 32-channel subscriber cable.
Figure 4-17 Appearance of a 32-channel subscriber cable
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
267
Figure 4-18 shows the structure of a 32-channel subscriber cable.
Figure 4-18 Structure of a 32-channel subscriber cable
Pin AssignmentsFigure 4-19 shows the pin assignments of a 32-channel subscriber cable.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
268
Figure 4-19 Pin assignments of a 32-channel subscriber cable
Technical SpecificationsTable 4-16 lists the technical specifications of a 32-channel subscriber cable.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
269
Table 4-16 Technical specifications of a 32-channel subscriber cable
Parameter Description
Connector Champ 64-pin
Cable type Symmetrical twisted pair
Color PANTONE 430U
Characteristic impedance 100.0 ohms
Wire diameter of the inner conductor 0.400 mm
Wire gauge of the inner conductor 26 AWG
Number of wires 64
Breakdown voltage 1000.0 V
DC resistance of the inner conductor 145.0 ohms/km
Frequency range ADSL: 1 MHz - 20 MHzVDSL: 1 MHz - 30 MHz
Frequency attenuation ≤ 2.95 dB/100 m (1 MHz)
Capacitance ≤ 56 nF/km (1 kHz)
4.13 E1 Trunk CableThis topic covers the applications, appearances, pin assignments, and technical specificationsof E1 trunk cables.
4.13.1 75-ohm E1 Trunk CableA 75-ohm E1 trunk cable is a communication cable used for transmitting E1 trunk signals.
ApplicationA 75-ohm E1 trunk cable can transmit eight channels of E1 signals. The cable is connected asfollows:
l One end is a 44-pin connector, connecting to an E1 port on a board.l The other end is bare wires, connecting to the DDF.
AppearanceA 75-ohm E1 trunk cable is a coaxial cable and Figure 4-20 shows its appearance.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
270
Figure 4-20 Appearance of a 75-ohm trunk cable
Figure 4-21 shows the structure of a 75-ohm E1 trunk cable.
Figure 4-21 Structure of a 75-ohm E1 trunk cable
Pin AssignmentsTable 4-17 describes the pin assignments of a 75-ohm E1 trunk cable.
NOTE
"SN" in "Cable and SN" is the print on the cable sheath.
A 75-ohm E1 trunk cable consists of the shield layer and wire.
In Table 4-17, "Rx/Tx Channel" indicates that the transmitting is from the board and the receiving is tothe board.
l R0: receive end of channel 0 E1 signals
l T0: transmit end of channel 0 E1 signals
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
271
Table 4-17 Pin assignments of the 75-ohm E1 trunk cable
X1 Pin Cable and SN Rx/TxChannel
X1 Pin Cable and SN Rx/TxChannel
38 Shieldlayer
1 R0 15 Shieldlayer
2 T0
23 Wire 30 Wire
37 Shieldlayer
3 R1 14 Shieldlayer
4 T1
22 Wire 29 Wire
36 Shieldlayer
5 R2 13 Shieldlayer
6 T2
21 Wire 28 Wire
35 Shieldlayer
7 R3 12 Shieldlayer
8 T3
20 Wire 27 Wire
34 Shieldlayer
9 R4 11 Shieldlayer
10 T4
19 Wire 26 Wire
33 Shieldlayer
11 R5 10 Shieldlayer
12 T5
18 Wire 25 Wire
32 Shieldlayer
13 R6 9 Shieldlayer
14 T6
17 Wire 24 Wire
31 Shieldlayer
15 R7 8 Shieldlayer
16 T7
16 Wire 7 Wire
Technical Specifications
Table 4-18 lists the technical specifications of a 75-ohm E1 trunk cable.
Table 4-18 Technical specifications of a 75-ohm E1 trunk cable
Parameter Description
Connector DB44 connector
Cable type Coaxial cable
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
272
Parameter Description
Characteristic impedance 75.0 ohms
Cable diameter 2.20 mm
Wire diameter of the inner conductor 0.25 mm
DC resistance of the inner conductor ≤ 355.0 ohms/km
Frequency attenuation 4.2 dB/100 m@2 MHz
Capacitance ≤ 64 pF/m
4.13.2 120-ohm E1 Trunk CableA 120-ohm E1 trunk cable is a communication cable used for transmitting E1 trunk signals.
ApplicationA 120-ohm E1 trunk cable can transmit eight channels of E1 signals. The cable is connectedas follows:
l One end is a 44-pin connector, connecting to an E1 port on a board.l The other end is bare wires, connecting to the DDF.
AppearanceA 120-ohm E1 trunk cable is a twisted pair cable and Figure 4-22 shows its appearance.
Figure 4-22 Appearance of a 120-ohm trunk cable
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
273
Figure 4-23 shows the structure of a 120-ohm E1 trunk cable.
Figure 4-23 Structure of a 120-ohm E1 trunk cable
Pin Assignments
Table 4-19 describes the pin assignments of a 120-ohm E1 trunk cable.
Table 4-19 Pin assignments of the 120-ohm E1 trunk cable
X1 Cable W1 Remark X1 Cable W2 Remark
CoreColor
Relationship
CoreColor
Relationship
15 Blue Pair 1 Tx1- 38 Blue Pair1 Rx1-
30 White Tx1+ 23 White Rx1+
14 Orange Pair 2 Tx2- 37 Orange Pair2 Rx2-
29 White Tx2+ 22 White Rx2+
13 Green Pair 3 Tx3- 36 Green Pair3 Rx3-
28 White Tx3+ 21 White Rx3+
12 Brown Pair 4 Tx4- 35 Brown Pair4 Rx4-
27 White Tx4+ 20 White Rx4+
11 Grey Pair 5 Tx5- 34 Grey Pair5 Rx5-
26 White Tx5+ 19 White Rx5+
10 Blue Pair 6 Tx6- 33 Blue Pair6 Rx6-
25 Red Tx6+ 18 Red Rx6+
9 Orange Pair 7 Tx7- 32 Orange Pair7 Rx7-
24 Red Tx7+ 17 Red Rx7+
8 Green Pair 8 Tx8- 31 Green Pair8 Rx8-
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
274
X1 Cable W1 Remark X1 Cable W2 Remark
CoreColor
Relationship
CoreColor
Relationship
7 Red Tx8+ 16 Red Rx8+
Technical Specifications
Table 4-20 Technical specifications of a 120-ohm E1 trunk cable
Parameter Description
Connector DB44 connector
Cable type Symmetrical twisted pair
Characteristic impedance 120.0 ohms
Core diameter of the inner conductor 0.50 mm
Wire gauge of the inner conductor 24 AWG
DC resistance of the inner conductor 98.0 ohms/km
Frequency attenuation ≤ 2.20 dB/100 [email protected] MHz
Capacitance ≤ 56.0 pF/m@1 KHz
4.14 Optical FiberAn optical fiber connects an optical port to an upstream device or optical network terminal.
Appearance and StructureThe appearances of a single-mode optical fiber and a multi-mode optical fiber are the same,but their colors are different. The single-mode optical fiber is yellow, and the multi-modeoptical fiber is orange.
Figure 4-24 and Figure 4-25 show the appearances of single-mode optical fibers withdifferent connectors.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
275
Figure 4-24 Appearance of a single-mode optical fiber with LC/PC connectors
Figure 4-25 Appearance of a single-mode optical fiber with SC/PC (SC/UPC) connectors
An optical fiber carries optical signals. It is connected as follows:
l One end of the optical fiber is connected to an optical port of a board.
l The other end of the optical fiber is connected to the optical distribution frame (ODF),optical port of the upper layer device, or optical port of other devices.
Fiber Selection Criterion
Table 4-21 lists the criteria for selecting optical fibers. Table 4-22 lists common opticalconnectors.
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
276
Table 4-21 Criteria for selecting optical fibers
Determine ... According to ...
Length Survey result
Single-mode ormulti-mode
Optical module type
Optical connectortype
l Square connector: SC/PC, SC/UPC and LC/PCl Round connector: FC/PC
Table 4-22 Common optical connectors
SC/PC (SC/UPC) connectorLC/PC connector
FC/PC connector
SmartAX MA5616 Multi-service Access ModuleHardware Description 4 Cable
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
277
5 Electromechanical Device
About This Chapter
This topic covers the functions, front panels, input terminals, output terminals, andspecifications of the electromechanical devices for the MA5616.
5.1 EPS30-4815AF Power SystemThe AC-powered cabinet uses the EPS30-4815AF power system to convert the AC input intothe DC power for power distribution.
5.2 ETP4830 Power SystemAn AC-powered cabinet uses the ETP4830 power system to convert the AC power to the DCpower for power distribution. The small and modular ETP4830 power system supports easyinstallation and maintenance, effective LCD interface management, and excellent securityspecifications design. The power system supports a maximum of 30 A output current.
5.1 EPS30-4815AF Power SystemThe AC-powered cabinet uses the EPS30-4815AF power system to convert the AC input intothe DC power for power distribution.
FunctionThe EPS30-4815AF power system converts one AC input into two DC outputs to implementthe DC power distribution. It can be connected to one set of batteries and use its monitoringmodule to manage the batteries.
The EPS30-4815AF power system can also use the external sensor transfer box to collect andreport the status of sensors and standby detected parameters.
NOTE
The rectifier modules of the EPS30-4815AF power system work in the load balancing and mutual hotbackup mode.
AppearanceFigure 5-1 shows the appearance of the EPS30-4815AF power system.
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
278
Figure 5-1 Appearance of the EPS30-4815AF power system
Rectifier module
Monitoring module
Configuration
Table 5-1 lists the component configuration of the EPS30-4815AF power system.
Table 5-1 Component configuration of the EPS30-4815AF power system
Component Configuration
GERM4815T rectifier module 1 to 2 (optional)
EPMU03 monitoring module 1
Rack-EPS30-4815AFEM AC/DC powersupply unit
1
The EPS30-4815AF power system can be configured with two rectifier modules, which areconnected in parallel for output.
Table 5-2 shows the mapping between the number of rectifier modules in the EPS30-4815AFpower system and the maximum output current.
Table 5-2 Mapping between the number of rectifier modules of the EPS30-4815AF powersystem and the maximum output current
Quantity of Rectifier Modules Maximum Output Current
1 15 A
2 30 A
LED Description
Table 5-3 describes the LEDs on the rectifier module of the EPS30-4815AF power system.
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
279
Table 5-3 LEDs on the rectifier module of the EPS30-4815AF power system
LED Status Description
RUN The green LED is on. The rectifier module works in the normalstate.
The green LED is off. This LED is off when the red LED is on orthe yellow LED is on which is not caused bythe output overcurrent.
ALM The yellow LED is on. An alarm has been generated for the rectifiermodule. The possible causes are as follows:l The AC power is cut off or no AC power
is supplied.l Over-temperature protection is enabled.l Primary protection is enabled.
Specifically, the rectifier moduleautomatic protection function is enableddue to a high voltage on the AC inputend.
l Overcurrent protection is enabled.Specifically, the rectifier moduleautomatic protection function is enabledbecause the DC output current of therectifier module exceeds the currentrange supported by the rectifier module.
The yellow LED blinks. The communication of the rectifier moduleis interrupted.
The yellow LED is off. The rectifier module works in the normalstate.
FAULT The red LED is on. The rectifier module is faulty. The possiblecauses are as follows:l The AC power supply is faulty.l The output voltage is 0 V.l The fan is faulty.l The rectifier module output is short-
circuited or does not work.
The red LED is off. The rectifier module works in the normalstate.
Table 5-4 describes the LEDs on the monitoring module of the EPS30-4815AF power system.
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
280
Table 5-4 LEDs on the monitoring module of the EPS30-4815AF power system
LED Status Description
RUN The green LED is on for1s and off for 1srepeatedly.
The monitoring module works in the normalstate.
The green LED isblinking quickly.
The monitoring unit hardware is normal butthe communication between the monitoringunit and the upper layer device is faulty.
The green LED is off. The monitoring module is faulty or there isno AC power input.
ALM The red LED is on. The system generates a critical alarm or thebattery is disconnected.
The red LED is off. The system does not generate any criticalalarm and the battery is already connected.
Input TerminalThe EPS30-4815AF power system supports one 220 V AC power input and the standard 3-pin connector is used.
Figure 5-2 shows the input terminals of the EPS30-4815AF power system.
Figure 5-2 Input terminals of the EPS30-4815AF power system
AC INPUT
RUN
ALM
AC INPUT
RUN
ALARM
FAULT
GERM4815T GERM4815T
RUN
ALARM
FAULT
EPMU03COM
RS232/RS485
FU-BT20A
FU-110A
FU-220A
DC OUTPUT
LOAD110A
LOAD220A
BATT.20A
Output TerminalThe EPS30-4815AF power system supports three output terminals. The two pins on the left ofthe output terminal are the output positive pole and the two pins on the right of the outputterminal are the output negative pole.
Figure 5-3 shows the output terminals of the EPS30-4815AF power system.
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
281
Figure 5-3 Output terminals of the EPS30-4815AF power system
RUN
ALM
AC INPUT
RUN
ALARM
FAULT
GERM4815T GERM4815T
RUN
ALARM
FAULT
EPMU03COM
RS232/RS485
FU-BT20A
FU-110A
FU-220A
DC OUTPUT
LOAD110A
LOAD220A
BATT.20A
DC OUTPUT
LOAD110A
LOAD220A
BATT.20A
+ + - -
Figure 5-4 shows the fuses of the output tributaries in the EPS30-4815AF power system.
Figure 5-4 Fuses of the output tributaries in the EPS30-4815AF power system
RUN
ALM
AC INPUT
RUN
ALARM
FAULT
GERM4815T GERM4815T
RUN
ALARM
FAULT
EPMU03COM
RS232/RS485
FU-BT20A
FU-110A
FU-220A
DC OUTPUT
LOAD110A
LOAD220A
BATT.20A
FU-BT20A
FU-220A
FU-110A
Table 5-5 shows the mapping between the fuses of the output tributaries and the loadtributaries.
Table 5-5 Mapping between the fuses of the output tributaries and the load tributaries
Fuse of the Output Tributary Load Tributary
FU-1 (10 A) LOAD1 (10 A)
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
282
Fuse of the Output Tributary Load Tributary
FU-2 (20 A) LOAD2 (20 A)
FU-BT (20 A) BATT (20 A)
DIP Switch
The EPS30-4815AF power system provides a DIP switch, the DIP switch is on the rightmiddle of the monitoring module control board, which can be seen after you remove themonitoring module. The DIP switch has eight available electrical switches. ON indicates 1,and OFF indicates 0. Table 5-6 describes the settings of DIP switch.
Table 5-6 Settings of the DIP switch
ElectricalSwitch
Setting Indication FactoryDefault
1-5 Supported Used to set the address of the environmentmonitoring module.
1: OFF2: OFF3: OFF4: OFF5: OFF
6 ON The rate of the serial port is 9600 bit/s. ON
OFF The rate of the serial port is 19200 bit/s.
7 Notsupported
- OFF
8 Notsupported
- OFF
The DIP switches 1-5 are used to set the address of the environment monitoring module,Table 5-7 shows the settings of the DIP switches.
Table 5-7 Settings of the DIP switches 1-5
5 4 3 2 1 Address Value
0 0 0 0 0 0
0 0 0 0 1 1
0 0 0 1 0 2
0 0 0 1 1 3
0 0 1 0 0 4
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
283
5 4 3 2 1 Address Value
0 0 1 0 1 5
0 0 1 1 0 6
0 0 1 1 1 7
0 1 0 0 0 8
0 1 0 0 1 9
0 1 0 1 0 A
0 1 0 1 1 B
0 1 1 0 0 C
0 1 1 0 1 D
0 1 1 1 0 E
0 1 1 1 1 F
1 0 0 0 0 10
.. .. .. .. .. ..
SpecificationsTable 5-8 lists the specifications of the EPS30-4815AF power system.
Table 5-8 Specifications of the EPS30-4815AF power system
Parameter Specification
Input l Rated input voltage: 220 V AC (90-290 V AC) (Notethat in the range of 90-176 V AC, the output current alsodecreases linearly, limited within a specified range.)
l Maximum input current: 10 Al Frequency: 50 Hz (45-65 Hz)
Output l Rated output voltage: -53.5 V DCl Voltage range: -43.2 V DC to -57.6 V DCl Output current:
– LOAD1: 10 A (fuse)– LOAD2: 20 A (fuse)– BATT: 20 A (fuse)
Efficiency ≥ 90% (in rated working state, 50% to 100% load)
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
284
Parameter Specification
Operating temperaturerange
-33°C to +65°C (Note that in the range of +50°C to +65°C,the output current also decreases linearly, limited within aspecified range.)
Cooling method Forced air cooling, with the built-in fan in the rectifiermodule
Dimensions (excludingmounting ears)
442 mm x 250 mm x 43.6 mm (W x D x H)
5.2 ETP4830 Power SystemAn AC-powered cabinet uses the ETP4830 power system to convert the AC power to the DCpower for power distribution. The small and modular ETP4830 power system supports easyinstallation and maintenance, effective LCD interface management, and excellent securityspecifications design. The power system supports a maximum of 30 A output current.
FunctionThe ETP4830 power system supports the following functions:
l Converts AC input to DC inputs and provides the DC inputs for communication devices.
l Communicates with the upper device using a COM or an RS485/RS232 serial port;sends control signals based on the values of monitored parameters or the controlcommand sent by the upper device; detects power distribution parameters, power supplymodule parameters, and auxiliary digital parameters in real time.
l Connects to one group of lead acid batteries and uses a site monitoring unit (SMU) tomanage the batteries. Manages battery charging and discharging, ensuring efficientbattery usage.
l Connects to a sensor transfer box using a DB50 port, detecting analog parameters anddigital parameters, and outputting control signals.
l Uses the SMU to monitor all running parameters for the ETP4830 power system in realtime, determines the working status, and reports alarms in a timely manner.
Appearance
Figure 5-5 shows the appearance of the ETP4830 power system.
Figure 5-5 ETP4830 power system
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
285
ConfigurationTable 5-9 describes the components of the ETP4830 power system.
Table 5-9 Component configuration of the ETP4830 power system
Component Configuration
ETP4830-A1 AC and DC powerdistribution subrack
1
Monitoring module SMU01B 1
Power supply module R4815N1/R4815G1 1 to 2 (optional; by default, the R4815N1 isconfigured)
The ETP4830 power system can be configured with two power supply modules, which areconnected in parallel for output.
Table 5-10 shows the mapping between the quantity of power supply modules in theETP4830 power system and the maximum output current.
Table 5-10 Mapping between the quantity of power supply modules of the ETP4830 powersystem and the maximum output current
Quantity of Power Supply Modules Maximum Output Current
1 15 A
2 30 A
Communication Ports on the SMU01B Monitoring ModuleTable 5-11 describes the communication ports on the SMU01B monitoring module. A usercan set the baud rate of the device using the LCD interface of the monitoring module. Thebaud rates 9600 bit/s and 19200 bit/s are automatically negotiated.
Table 5-11 Communication ports on the SMU01B monitoring module
CommunicationPort
CommunicationMode
CommunicationParameter
Description
COM RS485/RS232 Baud rate: 19200bit/s or 9600 bit/s
Used as a serial port,communicating withthe upper device
RS485/RS232 RS485/RS232 Baud rate: 19200bit/s or 9600 bit/s
Used as a serial port,supporting thenorthbound/southboundcommunications
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
286
IndicatorsTable 5-12 describes the indicators on the R4815N1 power supply module.
Table 5-12 Indicators on the R4815N1 power supply module
Indicator Color Status Description
Power indicator Green Steady on Normal
Off There is no ACinput.
Blinking at afrequency of 0.5 Hz
There is AC input,and the powersupply module is inthe manual querystate.
Blinking at afrequency of 4 Hz
Data is being loadedonline.
Alarm indicator Yellow Steady on A protectionmechanism istriggered. After thefault is rectified, thePSU can be restored.
Blinking Communicationbetween the PSUand the SMU isinterrupted.
Off Normal
Fault indicator Red Steady on An unrecoverablefault occurs.
Off Normal
Blinking The power supplymodule equippedwith the EMU doesnot match the actualpower supplymodule.
Table 5-13 describes the indicators on the SMU01B monitoring module.
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
287
Table 5-13 Indicators on the SMU01B monitoring module
Indicator Color Status Description
RUN Green Off The monitoringmodule is faulty orthere is no DCpower input.
Blinking at afrequency of 0.5 Hz
The monitoringmodule is workingproperly andcommunicating withthe upper deviceproperly.
Blinking at afrequency of 4 Hz
The monitoringmodule worksproperly but doesnot communicatewith the upperdevice properly.
ALM Red Off The system does notgenerate any urgentor critical alarms.
Steady on The systemgenerates urgent orcritical alarms.
Input TerminalThe ETP4830 power system supports one 110 V AC or 220 V AC input and connects to anAC input cable. Figure 5-6 shows the input terminals in the ETP4830 power system.
Figure 5-6 Input terminals in the ETP4830 power system
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
288
Output TerminalThe ETP4830 power system supports three output terminals. The two pins on the left of theoutput terminal are the output positive pole and the two pins on the right of the outputterminal are the output negative pole.
Figure 5-7 shows the output terminals in the ETP4830 power system.
Figure 5-7 Output terminals in the ETP4830 power system
Figure 5-8 shows the output branch fuse in the ETP4830 power system.
Figure 5-8 Output branch fuse in the ETP4830 power system
Table 5-14 shows the mapping between the fuses of the output tributaries and the loadtributaries.
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
289
Table 5-14 Mapping between the fuses of the output tributaries and the load tributaries
Fuse of the Output Tributary Load Tributary
FU-1 (20 A) LOAD1 (20 A)
FU-2 (20 A) LOAD2 (20 A)
FU-BT (20 A) BATT (20 A), used for connecting to batteries
SpecificationsTable 5-15 lists the specifications of the ETP4830 power system.
Table 5-15 Specifications of the ETP4830 power system
Parameter Class Parameter Description
Conditions Operatingenvironmenttemperature
-40°C to +70°CNOTE
The power system can work at a temperature of70°C for 8 hours.
Operatingenvironmenthumidity
5% to 95% (no condensation)
Altitude 0 m to 4000 m(Note that in the range of 2000 m to 4000 m,the operating temperature decreases by 1°Cwhen the altitude increases by 200 m.)
AC input Mode mono-phase
Voltage 85 V AC to 300 V AC (rated value: 220 V)
Frequency 45 Hz to 66 Hz (rated value: 50 Hz)
Power factor ≥ 0.99 in the case of a rated load
Power supplymodule peakefficiency
l R4815N1: 94%l R4815G1: 96%
DC output Voltage -42 V to -58 V
Default voltage -53.5 V
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
290
Parameter Class Parameter Description
Maximum power l R4815N1: R481N1: 2000 W (inputvoltage: 176 V AC to 300 V AC; if thetemperature is higher than 55°C, powerdecreases linearly); 1000 W (input voltage:85 V AC to 175 V AC; if the temperatureis higher than 55°C, power decreaseslinearly)
l R4815G1: 1740 W (input voltage: 176 VAC to 300 V AC; if the temperature ishigher than 55°C, power decreaseslinearly); 870 W (input voltage: 85 V ACto 175 V AC; if the temperature is higherthan 55°C, power decreases linearly)
NOTEMaximum output power of the system = Number ofthe configured power supply modules x Outputpower of each power supply module
Regulated voltageprecision
≤ ±0.6%
Peak noise voltage ≤ 200 mV (0 MHz to 20 MHz)
Structure Dimensions (H x Wx D) withoutbrackets
43.6 mm x 442 mm x 255 mm
Weight ≤ 8 kg (including modules)
Protection class IP20
Installation mode Installed in an IEC cabinet or an ETSI cabinetwith brackets
Maintenance mode Front access
Cooling method Forced air cooling, with the built-in fan in thepower supply module
SmartAX MA5616 Multi-service Access ModuleHardware Description 5 Electromechanical Device
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
291
6 Environment Requirement
About This Chapter
This appendix describes the requirements on storage environment, transportationenvironment, and running environment.
The environment can be classified into three types: storage environment, transportationenvironment, and running environment. The environment requirements are regulatedaccording to the following:
l ETSI EN 300 019l ETSI EN 300 753l IEC 60068-2
6.1 Operation EnvironmentThe operation environment must comply with ETSI EN 300 019-1-3.
6.2 Transport EnvironmentThe transport environment must comply with ETSI EN 300 019-1-2.
6.3 Storage EnvironmentThe storage environment must comply with ETSI EN 300 019-1-1.
6.4 Corrosive Gas ControlThis topic describes the requirements for corrosive gas control in the equipment room andoutdoor cabinet.
6.5 Environment Requirements on Outdoor CabinetsThis topic describes requirements on outdoor cabinets matched the device.
6.1 Operation EnvironmentThe operation environment must comply with ETSI EN 300 019-1-3.
SmartAX MA5616 Multi-service Access ModuleHardware Description 6 Environment Requirement
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
292
Climate Requirements
Table 6-1 Requirements on temperature and humidity
Temperature Relative Humidity
-40°C to 65°C 5% to 95%
NOTEThe point where temperature and humidity values are taken is 1.5 meters above floor level and 0.4meters in front of the cabinet when there is no protection board in either the front or back of the cabinet.
To improve product application reliability, it is recommended that a dedicated precise air-conditioner be installed in an equipment room and the temperature and relative humidity becontrolled within the following ranges:l Temperature range: 15°C to 30°Cl Relative humidity range: 40% to 75%
NOTE
Do not install the air-conditioner above the equipment and ensure that the air exhaust vent of the air-conditioner is not directly towards the equipment. Keep the air-conditioner away from a window aspossible to ensure that no moisture from the window is blown towards the equipment through the air-conditioner.
Table 6-2 Requirements on climate
Item Range
Altitude ≤4000 m
NOTEThe air density varies with the altitude, which affects the heat dissipation capabilities of devices.Therefore, the working temperature of the device changes with the altitude.
Biological Requirementsl The environment must be free of mold and mildew.l The environment must be free of rodents (such as mice).
6.2 Transport EnvironmentThe transport environment must comply with ETSI EN 300 019-1-2.
SmartAX MA5616 Multi-service Access ModuleHardware Description 6 Environment Requirement
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
293
Climate Requirements
Table 6-3 Requirements on climate
Item Range
Atmospheric pressure 55 kPa to 106 kPa
Temperature -40°C (-104°F) to +70°C (+158°F)
Temperature change rate ≤ 1°C /min
Relative humidity 5% to 95%
Solar radiation ≤ 1120 W/m2
Heat radiation ≤ 600 W/m2
Waterproof Requirements
During transportation, ensure that the following conditions are met:
l The packing boxes are intact.
l Appropriate measures are taken to prevent the ingress of rainwater.
l The transportation facilities are dry.
Biological Requirementsl The environment must be free of mold and mildew.
l The environment must be free of rodents (such as mice).
Air Quality Requirementsl The environment must be free of explosive, conductive, magnetic conductive, and
corrosive dust.
l The density of mechanically active substances must meet the requirements listed inTable 6-4.
l The density of chemically active substances must meet the requirements in ETSI EN300019-1-2 and IEC 60721-3-2.
Table 6-4 Requirements on the density of mechanically active substances
Mechanically Active Substance Density
Suspended dust No requirement
Deposited dust ≤ 3.0 mg/(m2•h)
Sand ≤ 100 mg/m3
SmartAX MA5616 Multi-service Access ModuleHardware Description 6 Environment Requirement
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
294
Mechanical Stress Requirements
Table 6-5 Requirements on mechanical stress
Frequency (Hz) PSD (g2/Hz) Remarks
1 0.00072 For class-A packaging: the startfrequency is 5 Hz. For class-Bpackaging: If the start frequencyof the device to be tested cannotreach 1 Hz, the start frequency canbe changed. However, the changedstart frequency cannot higher than2 Hz.
3 0.018
4 0.018
5 0.01
100 0.01
135 0.00148
200 0.001
201 0.00012
300 0.00001
Root-mean-squareacceleration (Grms)
1.087
The random vibration spectrum curve (PSD vs Hz) set according to the preceding tablecomplies with the the following figure.
Item Subitem Range
Shock (100 collisions) Response spectrum I(mass > 50 kg)
100 m/s2, 11 ms, 100 collisions onevery side
Response spectrum II(mass ≤ 50 kg)
180 m/s2, 6 ms, 100 collisions onevery side
SmartAX MA5616 Multi-service Access ModuleHardware Description 6 Environment Requirement
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
295
Item Subitem Range
NOTEShock response spectrum (SRS): indicates the maximum acceleration response curve generated by thedevice under specified shocks.
Packaging Materials
Boards must be packed with the original packaging materials during transportation. If theoriginal packaging materials are lost, contact Huawei.
6.3 Storage EnvironmentThe storage environment must comply with ETSI EN 300 019-1-1.
Climate Requirements
Table 6-6 Requirements on climate
Item Range
Atmospheric pressure 70 kPa to 106 kPa
Temperature -40°C (-104°F) to +70°C (+158°F)
Temperature change rate ≤ 1°C /min
Relative humidity 5% to 100%
Solar radiation ≤1120 W/m2
Heat radiation ≤600 W/m2
Waterproof Requirementsl The equipment must be protected from water ingress. It should be stored indoors on a
dry floor away from fire-fighting and heating facilities and places where water leaks mayoccur.
l If storing the equipment outdoors, ensure that the following conditions are met:– The packing boxes are intact.– Appropriate measures are taken to prevent the ingress of rainwater.– The ground where the packing boxes are stored is dry.– The packing boxes are protected from direct sunlight.
Biological Requirementsl The environment must be free of mold and mildew.l The environment must be free of rodents (such as mice).
SmartAX MA5616 Multi-service Access ModuleHardware Description 6 Environment Requirement
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
296
Air Quality Requirementsl The environment must be free of explosive, conductive, magnetic conductive, and
corrosive dust.l The density of mechanically active substances must meet the requirements listed in
Table 6-7.l The density of chemically active substances must meet the requirements in ETSI EN
300019-1-1 and IEC 60721-3-1.
Table 6-7 Requirements on the density of mechanically active substances
Mechanically ActiveSubstance
Density
Suspended dust ≤ 5.00 mg/m3
Deposited dust ≤ 20.0 mg/(m2 •h)
Sand ≤ 300 mg/m3
Mechanical Stress Requirements
Table 6-8 Requirements on mechanical stress
Item Subitem Range
Randomvibration
Acceleration spectraldensity
- 0.02m2/s3 -
Frequency range 5–10 Hz 10–50 Hz 50–100 Hz
dB/oct 12 - -12
6.4 Corrosive Gas ControlThis topic describes the requirements for corrosive gas control in the equipment room andoutdoor cabinet.
In addition to dust-proof efforts, measures should be taken to prevent the equipment room andoutdoor cabinet from being corroded by harmful gases such as SO2, H2S, and NH3. Thedensity of these harmful gases should meet requirements of ETSI 300019-1-3, IEC60721-3-3,and GR-63-CORE.
To meet the previous requirements, the customer or involving parties must take the followingmeasures:
l Construct the equipment room and outdoor cabinet far away from places with highcorrosive gas density such as the place near a chemical plant.
l Ensure that the air intake vent of the equipment room and outdoor cabinet does not facepollution sources.
SmartAX MA5616 Multi-service Access ModuleHardware Description 6 Environment Requirement
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
297
l Isolate storage batteries and generator from the equipment by placing them in anotherroom.
l Invite a professional company to detect the environment regularly.
6.5 Environment Requirements on Outdoor CabinetsThis topic describes requirements on outdoor cabinets matched the device.
l Water-proof and Dust-proof:IP55
l Heat dissipation:≥ 100 mm away from the air intake vent or air exhaust vent of the outdoor cabinet toother buildings
SmartAX MA5616 Multi-service Access ModuleHardware Description 6 Environment Requirement
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
298
7 A Acronyms and Abbreviations
A
AC alternating current
ADSL2+ asymmetric digital subscriber line 2 plus
B
BRA base rate adaptation
D
DC direct current
DSP digital signal processor
E
EMI electromagnetic interference
ESC electric supervisory channel
F
FC ferrule connector
FE fast Ethernet
G
GE gigabit Ethernet
GND ground
GPON gigabit passive optical network
I
IP Internet Protocol
SmartAX MA5616 Multi-service Access ModuleHardware Description 7 A Acronyms and Abbreviations
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
299
ISDN integrated services digital network
L
LC Lucent connector
M
MDF main distribution frame
MELT metallic loop test
O
ODF optical distribution frame
P
PC physical connect
PGND protection ground
PHY physical sublayer/physical layer
PON passive optical network
POTS plain old telephone service
PSTN public switched telephone network
S
SC square connector
SCU service control unit
SELT single ended loop testing
SFF small form factor
SFP small form-factor pluggable
SHDSL single-line high speed digital subscriber line
STP shielded twisted pair
U
UTOPIA universal test and operations PHY interface for ATM
UTP unshielded twisted pair
V
VDSL very high speed digital subscriber line
VoIP Voice over IP
SmartAX MA5616 Multi-service Access ModuleHardware Description 7 A Acronyms and Abbreviations
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
300
X
xDSL x digital subscriber line
SmartAX MA5616 Multi-service Access ModuleHardware Description 7 A Acronyms and Abbreviations
Issue 09 (2017-06-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
301