Greenologic introduces the idea of “Plug & Play

Network”. Using a ZigBee wireless network for Network”. Using a ZigBee wireless network for

which the installation and the commissioning is

fast, simple and no specific skills are required

The main cost of any building-services project is now labour.

Building-management systems (BMSs) are no exception, and Building-management systems (BMSs) are no exception, and

typically 40-60% of the project cost is for wiring alone.

ZB Connection provides high-quality solutions for

transforming and replacing devices used in

automation systems to transmit information automation systems to transmit information

wirelessly. Whether it is a new installation or an

expansion of an old one, wireless ZigBee technology

delivers reliable information transmission without

the need of expensive cabling.

Key Features

• ZigBee technology

• Standard ModBus interfaces into ZigBee network

• No ZigBee and RF skills required

• Quick and low-cost installation

• Complete family of sensors and actuators

• Portable handheld diagnostic tool available

• Client module for OEM devices

• Third party ModBus devices can be connected

• Protocol converter from Modbus/RTU to ZigBee

A gateway connects computers, SCADA systems and other monitoring systems to the

ZigBee network utilizing Modbus protocols and RS-232, RS-485, USB or Ethernet-

connection

• Protocol converter from Modbus/RTU to ZigBee

• Coordinator function for a ZigBee network

• Transparent bridge towards other ModBus devices

Its function is to extend the radio range of devices making it possible to cross obstacles or

long distances; it can also act as a parent device for battery powered sensors of the same

family

• Repeating ZigBee messages between

devices with poor link or out of coverage

• Routing function

• RF power 1mW – 10mW

The bridge has the main function to connect through a ZigBee network one or more

Modbus slave devices equipped with RS485 interface to one of the gateways of the 4-Noks

product family. In this way the PLC or PC-SCADA connected gateway can communicate

with Modbus slave devices eliminating wire installation. It can also act as a repeater and a

parent device for battery powered sensors

• Connecting Modbus devices to the ZigBee network

• Using Modbus/RTU protocol and RS485 interface

• Routing function

In order to maintain an "open

system", a ZigBee Bridge has been

developed, this device lets you

connect to a third party Modbus

Master via the ZigBee wireless

network, devices using the Gateway,

Bridge and other 4 Noks modules.

Various wireless, configurable and battery-operated detectors and

control units: - temperature, lighting and humidity detectors - digital

and analogue detector inputs - relay controller units - pulse, phase

and hall-effect detectors

>>>> See product catalogueproduct catalogue for more information on each module in the family>>>> See product catalogueproduct catalogue for more information on each module in the family

It is equipped with an optical input that can be connected

to an electricity meter, this input controls an incremental

counter.

Its task is to acquire inputs and send the data it acquires

and generates to a compatible Gateway at regular intervals.

The device requires an uninterruptible 12/24 Vdc (or 12/24

Vac) power supply.

It is capable to count pulses emitted from flow rate meters

(water, gas, electricity) and to measure the temperature

from both the 2 on board NTC inputs. Pulse counters and

temperature samples are sent at regular intervals to a

gateway of 4-noks products family.gateway of 4-noks products family.

Moreover, if temperature sensors are installed into an

hydraulic circuit in the inlet and outlet pipes this device can

send the difference between them.

Battery Powered version

These products use ZigBee mesh wireless

technology to reliably pass information

around a site by using multiple, self

organising, communication paths. This

•• Lower cost to read the Lower cost to read the

metersmeters

•• More accurate and complete More accurate and complete

readsreads

allows energy consumption to be

monitored and reduced, whilst reducing the

time, cost and disruption involved in

deploying a main & sub-metering solution.

•• Integrate into existing BMS Integrate into existing BMS

to export data as CSV to to export data as CSV to

AM&T PackageAM&T Package

•• Integrate into Integrate into GreenGreenBoxBox

• ModBus profile on ZigBee platform

• Router function

• Power and Electrical Energy measurement

(monophase) up to 15KW (70Amp external CT)

• Data logger up to 1 month• Data logger up to 1 month

• Digital output for external relay

• Stand-by killer

• Hour by hour weekly program timer (automatic

on/off/stand-by killer)

• Override push-button

Introducing Appliance Level Monitoring & ControlIntroducing Appliance Level Monitoring & Control

• ZigBee technology

• Standard ModBus interfaces into ZigBee network

• Monitor & control at the appliance level• Monitor & control at the appliance level

• Full control and scheduling features

• Built-in energy & cost counters

• Unique, patented technology for controlling pilot wire enabled electric heaters

• Enables further cost and energy savings on existing systems

• “mini BMS” solution for smaller projects

With administrative tools it is easy to analyse the current state of the network using a

dedicated Pc-software or a handheld analyser.

Z-CONFIG (PC Software) allows the analysis of ZigBee networks, allows you to view graphically the

quality of radio connections between routers that make up the network. You can easily Identify

weakness in a network, therefore it represents a useful tool in the test phase of the installation.

Z-HANDZER powerful handheld tool with unique features that reduce time for deploying and

commissioning ZB Networks. Displays RF strength of the Gateways and Routers in order to check if

one point has network coverage and can be used to deploy a ZigBee device

� New Build

� Refurbishments

� Schools

� Hospitals

� Commercial

� Heritage Buildings

� Luxury Homes

� Manufacturing

� Hotels

� Leisure Centres� Commercial

Buildings

� Offices

� Retail Shops

� Shopping Centres

� Religious Buildings

� Leisure Centres

� Small & Large Building

� Extend Existing

BMS/PLC/SCADA

Systems with ease

� OEM ZigBee Devices