Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
MaterialPolymerDensity Shown (range)Compression Deflection (PSI) ASTM D-1667Compression Set % loss of orig. height ASTM D-1667Tensile Strength- ASTM D412Flammability MVSS302 (*Gauge Specific)TemperatureUL (*Gauge Specific)Thickness Range
TypeMaterialReinforcementAdhesiveThermal Impedance (C in.2/W) ASTM E1530Thermal Conductivity (W/MK) ASTM E1530Dielectric Strength (volts/mil)UL (*gauge specific)Thickness
MaterialPolymerDensity Shown (range)Compression Deflection (PSI)Compression Set % Tensile Strength (*AAMA 2.18)Flammability MVSS302 (*Gauge Specific)TemperatureUL (*Gauge Specific)Thickness
TypeMaterialWater Absorption % ASTM D570Dielectric Strength (volts/mil)UL (*gauge specific) ThicknessThickness availabilityTemperature
MaterialPolymerDensity Shown (range)Compression Deflection Compression Set % loss Tensile StrengthFlammability MVSS302 (*Gauge Specific)Temperature Range (constant)UL (*Gauge Specific)Thickness
TypeMaterialThickness RangeDensity lbs/ftHardness Shore A (*Change)Force to Compress 10% PSI (*Change)Static Shear Adhesion Hours (*Change)ColorMarket
MaterialCore PolymerAdhesive180° Peel Adhesion (PSI) (*other testing methods)Tensile Strength (PSI)Dynamic Shear Strength (PSI)Temperature Foam colorLinerDensityThickness
MaterialCore PolymerAdhesive180 Peel Adhesion (PSI) (*90 Peel adhesion) Dynamic Tensile Strength (PSI) Dynamic Shear Strength (PSI)TemperatureCore colorLinerDensityThickness
Fine Line Masking Tape-Extremely flexible -PVC Film-Rubber adhesive-Temp. Resistance-302˚F-No shrinkage-Easy to remove-Conformable-Die-cuttable
GENERALGASKETING
THERMALMANAGEMENT
GENERALGASKETING
ELECTRICAL INSULATORS
HIGH-TEMPERATUREGASKETING
WINDOW ANDGLAZING TAPES
SPECIALTY PRODUCTSBONDING
BONDING &SPECIALTY TAPES
P-FoamPVC Foam4# (4-25lb).7 to .9 8%15 (PSI)Pass-15F to 160F*UL94 HBF.0625” to .500”
GAP FILLER-R10404Thermally conductive silicone n/aSilicone or Acrylic1.0 to 6.0 (DOC).30 to .65 (DOC)100V-1*32 to 250 MILS
4790-92Urethane15#2<2%15 (PSI)n/a-40F to 194FUL50 & UL508.125” to .500”
GE-FR700Lexan.28 (*ISO 62)1,500V0*.010”.010” to .017”115C
Thermalbond™ V2100Urethane.125” to .500”313531 to compress 10%2000Gray or BlackStructural Glazing
TypeAdhesiveGaugeFilm TypeColors
Market
Protective FilmsWater & Solvent Based Acrylic 1.2 to 10 MilPE, PP, PET, Clear, Blue, Yellow, Green, Opaque, Black & WhiteAutomotive, Construction, Metal, Laminates, Optical
Top MaterialBubble Material
Foil BubbleFoil / Film 1.8 milPolyethylene 2 mil
*DOC-Depends on Compression Force
TypeAdhesiveThicknessesMaterialCoefficient of friction
Lo-Skid MaterialAcrylic.016” to .125”Urethane1.1
TypeAdhesiveTotal ThicknessSpecification
Conspicuity TapePressure Sensitive.008”DOT-C2
TypeFoamFoam DensityScrimCoating
Scrim Foam .060” Polyethylene 1lbWoven Polyethylene1.2 mil Polyethylene w/ UV additives
TypeMaterialDensity shown (range)TemperatureThickness rangeFilmCompression Set % loss of orig. height
PVC MylarV744M9# (4-15lb).15F to 160F.0625” to .375”Mylar8%
Ceramic Fiber PaperAlumina Silicate fibers10-13#n/an/a75-90 PSIn/a2012FUL94 V0.0312” to .250”
Z545-AutomotiveUrethaneAcrylic6.75 lb/in width130 NTP-11120 NTP-5-40F to 200FBlackPoly-Blue30 lb/ft3
.045”
A3230AcrylicAcrylic*10 lb/in widthn/a40 ASTM D-3163-30F to 200FClearPoly-Bluen/a.118”
4216-SENEOPRENE-EPDM-SBR5-7#5-9n/a50 (PSI) Pass-40F to 158FUL94 HBF & HF1.0625” to 1.75”
Thermally Conductive FabricTF1879-Silicone coatedFiberglassOptional-silicone or acrylic.291.23500UL 94 V-09.0 MILS
4701-41Urethane15-30#5-40<5%40-120 (PSI)n/a-40F to 194F*UL50 & UL508.031” to .500”
Formex™GK10Polypropylene.06%2,200V0 & VTM-0.010”.005” to .040”106C to 115C
Thermalbond™ V2200Urethane.125” to .375”2230162000BlackStructural Glazing
HT-800Silicone22#9 (PSI) ASTM-D10565% ASTM D-105645 (PSI) ASTM D-375Pass-67F to 392FUL94 V0 (*HF1).0312” to .500”
3M™ PT 1100 AutomotiveAcrylicAcrylic20lb/in (*90˚ Peel)90 (PSI)n/a-40F to 250FBlackRed-GL-1 Poly 37 lb/ft3
.045”
V28120UrethaneAcrylic13 lb/in width75 NTP-11100 -40F to 200FBlackPoly-Blue30 lb /ft3
.120”
4114-EEPDM Sponge4.5-7 #2-5 (PSI)n/a60 (PSI) Pass-90F to 275Fn/a.0625” to 1.75”
Thermally Conductive TapeC695-graphite tapen/aThermally Conductive Acrylic.122.0Non-insulating---6.0 MILS
EG416Polyolefin4#n/an/a280% @ 50 (PSI) AAMA 2.18n/a-40F to 160Fn/a.063” to .250”
Nomex™ 410Aramid Paper.1%430-1600 V0*.010”.002” to .030”220C
V990PVC.0625” to .250”15n/a8.9 (*30% PSI)n/aBlack, Gray, WhiteWindow Glazing
R10400 MediumSilicone35#10 (PSI) ASTM-D105610% ASTM D-1056100 (PSI) ASTM D-412Pass-100F to 500FUL94 V0 (*HF1).0625” to .500”
3M VHB™ 4951-IndustrialAcrylicAcrylic18lb/in (*90˚ Peel)110 lb/in2 280 lb/in2 2200FWhiteClear Polyester50 lb/ft3
.045”
4965 Transfer TapePETAcrylic5.625 lb/in width11.4 lbs/inn/a176F (max)ClearPET Carrier & PP linern/a.008”
EPDMEPDM Solid80 Duro n/a25% (ASTM D395B)1500 (PSI) Pass-40F to 240Fn/a.0156” to 1”
3M™ 433High Temp. Foil Tapen/aSilicone-65F to 600F (*Temperature Range)n/an/aF.A.R. 25.853(a)3.6 MILS
EtherPolyether2#n/a10%n/aSAEJ-369(b), FAR.853(B)-45F to 228FUL 94 HF1.125” to 2.0”
FishpaperVulcanized Fibre Paper50%250UL E-31556 (M).030”.010” to .062”110C
V1520PVC.063” to .500”15*40 (Shore OO) ASTM D2240*7 PSI (ASTM-1667-25%)1000 grams for 10 days
BlackAAMA 810.1-92
Cequin-3M™Inorganic Paper1% ASTM D-6441-9.2KV (ASTM-D149)UL 1446.010”.005” to .060”220C
3M™ VHB™ Window TapeAcrylic core & Adhesive.045”45 lb./ft3
110 lb/in2 (Dynamic tensile)n/a70lb/in2 (*dynamic shear PSI)Black or GrayMuntin bar tape
MF Siltec-LDSilicone9.5-11#.8 (PSI) ASTM-D10565% ASTM D-105615 (PSI) ASTM D-412n/a-67F to 392FFAR 25.853 para (a-1).125” to 1.0”
3M VHB™ 4959-IndustrialAcrylicAcrylic20 lb/in (*90˚ Peel)75 lb/in2 255 lb/in2 2300FWhiteClear PET or Red PE45 lb/ft3
.120”
All Foam Materials arevavailable with a variety of adhesive systems.
*Items noted with an asterick were tested using a different specification.
See individual product bulletin for details. Purchaser and/or the end user of the product, assumes the risk of determining the suitability of use for this product. Purchaser and/or end user assumes all risk and liability whatsoever in connection with the use of the product sold herein.
Rewind Slitting
ISO 9001:2000113 Swett Avenue, Americus GA 31709 P 800.226.1863 F 229.928.2537
Spooling
Assembly Custom Sewing
CustomFabricatedSolutions
ww
w.u
sa-tsg.co
mC
usto
m Fab
ricated S
olu
tion
s
Capabilities
Additional Capabilities
Suppliers
Lathe SlittingLaminating
Flat-Bed Die Cutting
ExtrusionsSonic Welding
Kanban Programs
Die-Cutting Rotary Die-Cutting