Upload
vuongnhu
View
228
Download
1
Embed Size (px)
Citation preview
KW PlasticsPCR TECHNICAL DATA SHEET279 Pike County Lake Rd Troy, AL 36081 | 334.566.1563 | 800.633.8744 | kwplastics.com
KW620
PROPERTY
REGULATORY
Homopolymer Polypropylene Post-Consumer Resin
Melt Flow ASTM-D1238 8.0 g/10 minutes Specific Gravity pigmented ASTM-D792 0.92 g/mlElongation at Yield ASTM-D638 10% Tensile Yield Strength ASTM-D638 4,100 psi Flexural Modulus ASTM-D790 195,000 psi Notched Izod Impact ASTM-D256 1.0 ft-lb/inch
CONEG Compliant
NOTE: While this information is presented in good faith and believed to be accurate, KW does not guarantee satisfactory results fromreliance upon such information and disclaims all liability for any loss or damage arising out of its use. No information contained herein
is to be construed as a recommendation to use this product in conflict with any patent.
ISO 9001: 2008 registered, ISO/ IEC 17025: 2005 accredited laboratories, C.O.A. on every lot.
CHARACTERISTICS
KW PLASTICS IS THE INTERNATIONAL LEADER IN HIGH DENSITY POLYETHYLENE AND POLYPROPYLENE RECYCLING.
QUALITY
KW620 is sourced from mostly homopolymer, postconsumer PP. Some PE may be present.
KW-TDS-KW620-20160728 TMB